
[Federal Register Volume 79, Number 226 (Monday, November 24, 2014)]
[Notices]
[Pages 69990-69992]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-27688]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Pipeline and Hazardous Materials Safety Administration

[Docket No. PHMSA-2014-0136 (Notice No. 14-13)]


Information Collection Activities

AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), 
Department of Transportation (DOT).

ACTION: Notice and request for comments.

-----------------------------------------------------------------------

[[Page 69991]]

SUMMARY: In accordance with the Paperwork Reduction Act of 1995, PHMSA 
invites comments on certain information collections pertaining to 
hazardous materials transportation for which PHMSA intends to request 
renewal from the Office of Management and Budget (OMB).

DATES: Interested persons are invited to submit comments on or before 
January 23, 2015.

ADDRESSES: You may submit comments identified by the docket number 
(PHMSA-2014-0136) by any of the following methods:
     Federal eRulemaking Portal: Go to http://www.regulations.gov. Follow the online instructions for submitting 
comments.
     Fax: 1-202-493-2251.
     Mail: Docket Operations, U.S. Department of 
Transportation, West Building, Ground Floor, Room W12-140, Routing 
Symbol M-30, 1200 New Jersey Avenue SE., Washington, DC 20590.
     Hand Delivery: To Docket Operations, Room W12-140 on the 
ground floor of the West Building, 1200 New Jersey Avenue SE., 
Washington, DC 20590, between 9 a.m. and 5 p.m., Monday through Friday, 
except Federal holidays.
    Instructions: All submissions must include the agency name and 
docket number or Regulation Identification Number (RIN) for this 
notice. Internet users may access comments received by DOT at: http://www.regulations.gov. Note that comments received will be posted without 
change to: http://www.regulations.gov including any personal 
information provided.
    Requests for a copy of an information collection should be directed 
to Steven Andrews or T. Glenn Foster, Standards and Rulemaking Division 
(PHH-12), Pipeline and Hazardous Materials Safety Administration, 1200 
New Jersey Avenue SE., East Building, 2nd Floor, Washington, DC 20590-
0001, Telephone (202) 366-8553.

FOR FURTHER INFORMATION CONTACT: Steven Andrews or T. Glenn Foster, 
Standards and Rulemaking Division (PHH-12), Pipeline and Hazardous 
Materials Safety Administration, 1200 New Jersey Avenue SE., East 
Building, 2nd Floor, Washington, DC 20590-0001, Telephone (202) 366-
8553.

SUPPLEMENTARY INFORMATION: Section 1320.8 (d), Title 5, Code of Federal 
Regulations requires PHMSA to provide interested members of the public 
and affected agencies an opportunity to comment on information 
collection and recordkeeping requests. This notice identifies 
information collection requests that PHMSA will be submitting to OMB 
for renewal and extension. These information collections are contained 
in 49 CFR 171.6 of the Hazardous Materials Regulations (HMR; 49 CFR 
Parts 171-180). PHMSA has revised burden estimates, where appropriate, 
to reflect current reporting levels or adjustments based on changes in 
proposed or final rules published since the information collections 
were last approved. The following information is provided for each 
information collection: (1) Title of the information collection, 
including former title if a change is being made; (2) OMB control 
number; (3) summary of the information collection activity; (4) 
description of affected public; (5) estimate of total annual reporting 
and recordkeeping burden; and (6) frequency of collection. PHMSA will 
request a three-year term of approval for each information collection 
activity and, when approved by OMB, publish a notice of the approval in 
the Federal Register.
    PHMSA requests comments on the following information collections:
    Title: Testing, Inspection, and Marking Requirements for Cylinders.
    OMB Control Number: 2137-0022.
    Summary: Requirements in Sec.  173.301 for qualification, 
maintenance, and use of cylinders require that cylinders be 
periodically inspected and retested to ensure continuing compliance 
with packaging standards. Information collection requirements address 
registration of retesters and marking of cylinders by retesters with 
their identification number and retest date following the completion of 
required tests. Records showing the results of inspections and retests 
must be kept by the cylinder owner or designated agent until expiration 
of the retest period or until the cylinder is re-inspected or retested, 
whichever occurs first. These requirements are intended to ensure that 
retesters have the qualifications to perform tests and to identify to 
cylinder fillers and users that cylinders are qualified for continuing 
use. Information collection requirements in Sec.  173.303 require that 
fillers of acetylene cylinders keep, for at least 30 days, a daily 
record of the representative pressure to which cylinders are filled.
    Affected Public: Fillers, owners, users and retesters of reusable 
cylinders.
    Recordkeeping:
    Number of Respondents: 139,352.
    Total Annual Responses: 153,287.
    Total Annual Burden Hours: 171,642.
    Frequency of collection: On occasion.
    Title: (Rail Carriers and Tank Car Tank Requirements) Requirements 
for Rail Tank Car Tanks--Transportation of Hazardous Materials by Rail.
    OMB Control Number: 2137-0559.
    Summary: This information collection consolidates and describes the 
information provisions in parts 172, 173, 174, 179, and 180 of the HMR 
on the transportation of hazardous materials by rail and the 
manufacture, qualification, maintenance, and use of tank cars. The 
types of information collected include:
    (1) Approvals of the Association of American Railroads (AAR) Tank 
Car committee: An approval is required from the AAR Tank Car Committee 
for a tank car to be used for a commodity other than those specified in 
part 173 and on the certificate of construction. This information is 
used to ascertain whether a commodity is suitable for transportation in 
a tank car. AAR approval is also required for an application for 
approval of designs, materials and construction, conversion or 
alteration of tank car tanks constructed to a specification in part 
179, or an application for construction of tank cars to any new 
specification. This information is used to ensure that the design, 
construction, or modification of a tank car or the construction of a 
tank car to a new specification is performed in accordance with the 
applicable requirements.
    (2) Progress Reports: Each owner of a tank car that is required to 
be modified to meet certain requirements specified in Sec.  173.31 must 
submit a progress report to the Federal Railroad Administration (FRA). 
This information is used by FRA to ensure that all affected tank cars 
are modified before the regulatory compliance date.
    (3) FRA Approvals: An approval is required from FRA to transport a 
bulk packaging (such as a portable tank, IM portable tank, intermediate 
bulk container, cargo tank, or multi-unit tank car tank) containing a 
hazardous material in container-on-flat-car or trailer-on-flat-car 
service other than as authorized by Sec.  174.63. FRA uses this 
information to ensure that the bulk package is properly secured using 
an adequate restraint system during transportation. An FRA approval is 
also required for the movement of any tank car that does not conform to 
the applicable requirements in the HMR. These latter movements are 
currently being reported under the information collection for special 
permit applications.
    (4) Manufacturer Reports and Certificate of Construction: These 
documents are prepared by tank car manufacturers and used by owners, 
users, and FRA personnel to verify that

[[Page 69992]]

rail tank cars conform to the applicable specification.
    (5) Quality Assurance Program: Facilities that build, repair, and 
ensure the structural integrity of tank cars are required to develop 
and implement a quality assurance program. This information is used by 
the facility and DOT compliance personnel to ensure that each tank car 
is constructed or repaired in accordance with the applicable 
requirements.
    (6) Inspection Reports: A written report must be prepared and 
retained for each tank car that is inspected and tested in accordance 
with Sec.  180.509 of the HMR. Rail carriers, users, and the FRA use 
this information to ensure that rail tank cars are properly maintained 
and are in safe condition for transporting hazardous materials.
    Affected Public: Manufacturers, owners, and rail carriers of tank 
cars.
    Annual Reporting and Recordkeeping Burden:
    Number of Respondents: 266.
    Total Annual Responses: 16,782.
    Total Annual Burden Hours: 2,689.
    Frequency of Collection: Annually.
    Title: Testing Requirements for Non-bulk Packaging.
    OMB Control Number: 2137-0572.
    Summary: This information collection consolidates and describes the 
information provisions in parts 173 and 180 of the HMR on the testing 
requirements for non-bulk packagings. This OMB control number covers 
performance-oriented packaging standards and allows packaging 
manufacturers and shippers more flexibility in selecting more 
economical packagings for their products. This information collection 
also allows customizing the design of packagings to better suit the 
transportation environment that they will encounter and encourage 
technological innovations, decrease packaging costs, and significantly 
reduce the need for special permits.
    Affected Public: Each non-bulk packaging manufacturer that tests 
packagings to ensure compliance with the HMR.
    Annual Reporting and Recordkeeping Burden:
    Number of Respondents: 5,000.
    Total Annual Responses: 15,500.
    Total Annual Burden Hours: 32,500.
    Frequency of Collection: On occasion.

William S. Schoonover,
Deputy Associate Administrator, Pipeline and Hazardous Materials Safety 
Administration.
[FR Doc. 2014-27688 Filed 11-21-14; 8:45 am]
BILLING CODE 4910-60-P


