
[Federal Register Volume 79, Number 199 (Wednesday, October 15, 2014)]
[Notices]
[Pages 61937-61938]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-24439]



[[Page 61937]]

-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Pipeline and Hazardous Materials Safety Administration

[Docket No. PHMSA-2014-0086]


Pipeline Safety: Guidance for Strengthening Pipeline Safety 
Through Rigorous Program Evaluation and Meaningful Metrics

AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA); 
DOT.

ACTION: Notice; Issuance of Advisory Bulletin.

-----------------------------------------------------------------------

SUMMARY: PHMSA published Advisory Bulletin ADB-2012-10 in the Federal 
Register on December 5, 2012, to remind operators of gas transmission 
and hazardous liquid pipeline facilities of their responsibilities 
under current regulations to perform evaluations of their Integrity 
Management (IM) programs using meaningful performance metrics. PHMSA is 
issuing this Advisory Bulletin to expand that reminder by informing 
owners and operators of gas and hazardous liquid pipelines that PHMSA 
has developed guidance on the elements and characteristics of a mature 
program evaluation process that uses meaningful metrics.

FOR FURTHER INFORMATION CONTACT: Chris McLaren by phone at 281-216-4455 
or by email at chris.mclaren@dot.gov. All materials in this docket may 
be accessed electronically at http://www.regulations.gov. Information 
about PHMSA may be found at http://www.phmsa.dot.gov.

SUPPLEMENTARY INFORMATION:

I. Background

    PHMSA has long recognized and communicated the critical importance 
of operator self-evaluation as part of an effective safety program. 
PHMSA has promoted and required the development and implementation of 
processes to perform program evaluations, including the regular 
monitoring and reporting of meaningful metrics to assess operator 
performance.
    PHMSA further communicated this expectation in Advisory Bulletin 
ADB-2012-10, which was published in the Federal Register on December 5, 
2012. That Advisory Bulletin explicitly reminded operators of gas 
transmission and hazardous liquid pipeline facilities of their 
responsibilities under current regulations to perform evaluations of 
their IM programs using meaningful performance metrics.
    PHMSA has also recognized and emphasized the importance of operator 
senior management responsibilities to fully understand and acknowledge 
the implications of these program evaluations and to take the necessary 
steps to address deficiencies and make necessary program improvements. 
As these responsibilities are so important, PHMSA requires senior 
executives of operators to certify the IM program performance 
information they annually submit to PHMSA.
    As required by the IM rules, operators must have a process to 
measure the effectiveness of their programs; a process that determines 
whether the program is effective in assessing and evaluating pipeline 
integrity and in improving the integrity of pipeline systems. Program 
evaluations can help organizations make better management decisions and 
support continual process improvement. These evaluations should include 
an assessment gauging how an operator's performance satisfies its 
identified safety performance goals.
    Program and other evaluations may be conducted at different levels, 
including the company or corporate level, at a system level to gauge 
one pipeline system's performance against that of other systems within 
the organization or for selected assets with similar characteristics. 
Effective program evaluations should include all aspects of an 
operator's organization, not just the integrity group.
    Incident/accident investigations and abnormal operations and root 
cause analysis frequently reveal that management systems and 
organizational program deficiencies or failures are important 
contributors to pipeline accidents. For this reason, it is important 
that program evaluations also identify potential organizational or 
programmatic deficiencies and failures that could have the potential to 
lead to pipeline incidents/accidents.
    Operators should take effective corrective measures addressing IM 
program evaluation outcomes to improve programmatic activity as well as 
pipeline system performance and integrity. IM program evaluation 
processes should be formally controlled by operators and be an integral 
part of the operator's quality control and quality assurance program. 
The formal process should include management's commitment to monitor 
and evaluate performance metrics.
    Specific sections in the Federal IM regulations that directly 
require the need for operator program evaluation and the use of 
meaningful performance metrics include the following:
     For hazardous liquid pipelines, Sec. Sec.  195.452(f)(7) 
and 195.452(k) require methods to measure program effectiveness. 
Appendix C to 49 CFR 195 provides specific guidance on establishing 
performance measures, including the need to select measures based on 
the understanding and analysis of integrity threats to each pipeline 
segment. API Standard 1160, ``Managing Integrity for Hazardous Liquid 
Pipelines,'' also provides additional guidance on the program 
evaluation process and the use of performance measures in improving 
performance.
     For gas transmission pipelines, Sec. Sec.  192.911(i) and 
192.945 define the requirements for establishing performance metrics 
and evaluating IM program performance. The gas requirements invoke ASME 
B31.8S-2004, Managing System Integrity of Gas Pipelines. Section 9 of 
this standard provides guidance on the selection of performance 
measures.
     For gas distribution systems, Sec.  192.1007(e) requires 
development and monitoring of performance measures to evaluate the 
effectiveness of IM programs. An operator must consider the results of 
its performance monitoring in periodically reevaluating threats and 
risks. Guidance from ANSI/GPTC Z380, ``Guide for Gas Transmission and 
Distribution Piping Systems, 2012 Edition'' and Section 9 of ASME 
B31.8S-2004, ``Managing System Integrity of Gas Pipelines'' can also be 
used for the selection of performance measures that can be applied to 
gas distribution systems.
    When performing routine pipeline system inspections, PHMSA noted 
weaknesses in the development and implementation of program 
evaluations, including weaknesses in using meaningful metrics to 
identify opportunities for program improvements and corrective actions.
    Additionally, NTSB Recommendation P-11-19, which was generated 
following the San Bruno, CA, failure investigation, recommended PHMSA 
develop and implement standards for IM and other performance-based 
safety programs that require operators of all types of pipeline systems 
to assess the effectiveness of their programs using clear and 
meaningful metrics and identify and then correct deficiencies.
    In response to PHMSA's self-identified concerns and the NTSB 
recommendation, PHMSA developed a guidance document titled ``Guidance 
for Strengthening Pipeline Safety Through Rigorous Program Evaluation 
and Meaningful Metrics,'' which is available at http://phmsa.dot.gov/staticfiles/PHMSA/DownloadableFiles/Pipeline/Regulations/IMPEG.pdf.

[[Page 61938]]

    Major topic areas addressed in the guidance document include:
     Establishing Safety Performance Goals.
     Identifying Required Metrics.
     Selecting Additional Meaningful Metrics.
     Metric Monitoring and Data Collection.
     Program Evaluation Using Metrics.
    The guidance document includes tables listing regulation-required 
metrics and other programmatic and threat-specific metrics that 
operators could include in their documented IM program evaluations.
     Table 1 lists the IM-related metrics documented in 
pipeline operators' annual reports.
     Table 2 lists the threat-specific metrics required by 
Sec.  192.945 for gas transmission and required by Sec.  192.1007(g) 
for gas distribution systems.
     Table 3 provides guidance for operators and inspectors to 
identify meaningful metrics to help understand and measure the 
effectiveness of the individual program elements and processes used in 
an IM program.
     Table 4 provides guidance for operators and inspectors to 
identify meaningful threat-specific metrics that may be required to 
effectively measure the performance of gas transmission, hazardous 
liquid transmission and gas distribution pipeline IM programs.

II. Advisory Bulletin (ADB-2014-05)

    To: Owners and Operators of Natural Gas and Hazardous Liquid 
Pipelines.
    Subject: Guidance for Strengthening Pipeline Safety Through 
Rigorous Program Evaluation and Meaningful Metrics.
    Advisory: The Pipeline and Hazardous Materials Safety 
Administration (PHMSA) is issuing this Advisory Bulletin to inform 
owners and operators of natural gas and hazardous liquid pipelines that 
PHMSA has developed guidance on the elements and characteristics of a 
mature IM program evaluation process using meaningful metrics. This 
guidance document titled ``Guidance for Strengthening Pipeline Safety 
Through Rigorous Program Evaluation and Meaningful Metrics,'' is 
available on PHMSA's public Web site at http://phmsa.dot.gov/staticfiles/PHMSA/DownloadableFiles/Pipeline/Regulations/IMPEG.pdf, and 
should be used when operators develop and perform IM program 
evaluations. This guidance document provides additional specificity to 
several of the topics detailed in a previously issued Advisory 
Bulletin, ADB-2012-10, ``Using Meaningful Metrics in Conducting 
Integrity Management Program Evaluations.''
    Operators under the current regulations are required to perform 
program evaluations and use meaningful metrics. PHMSA's ``Guidance for 
Strengthening Pipeline Safety Through Rigorous Program Evaluation and 
Meaningful Metrics'' builds on existing standards and regulations to 
provide a more detailed and comprehensive description of the steps 
involved in program evaluations as well as the selection of meaningful 
performance metrics to support these evaluations. The guidance expands 
and clarifies PHMSA's expectations for operator processes when 
measuring IM program effectiveness.
    PHMSA inspectors will use the program evaluation guidance within 
``Guidance for Strengthening Pipeline Safety Through Rigorous Program 
Evaluation and Meaningful Metrics'' as criteria when evaluating the 
effectiveness of operator IM program evaluations to assure operators 
are developing sound program evaluation processes and are developing 
and applying a robust and meaningful set of performance metrics in 
their program evaluations.

    Authority: 49 U.S.C. Chapter 601 and 49 CFR 1.97.

    Issued in Washington, DC, on October 09, 2014.
Jeffrey D. Wiese,
Associate Administrator for Pipeline Safety.
[FR Doc. 2014-24439 Filed 10-14-14; 8:45 am]
BILLING CODE 4910-60-P


