
[Federal Register Volume 79, Number 164 (Monday, August 25, 2014)]
[Proposed Rules]
[Pages 50741-50834]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-19161]



[[Page 50741]]

Vol. 79

Monday,

No. 164

August 25, 2014

Part II





 Department of Transportation





-----------------------------------------------------------------------





 Pipeline and Hazardous Materials Safety Administration





-----------------------------------------------------------------------





49 CFR Parts 171, 172, 173, et al.





Hazardous Materials: Harmonization With International Standards (RRR); 
Proposed Rule

  Federal Register / Vol. 79 , No. 164 / Monday, August 25, 2014 / 
Proposed Rules  

[[Page 50742]]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Pipeline and Hazardous Materials Safety Administration

49 CFR Parts 171, 172, 173, 175, 176, 178, and 180

[Docket Nos. PHMSA-2013-0260 (HM-215M)]
RIN 2137-AF05


Hazardous Materials: Harmonization With International Standards 
(RRR)

AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), 
DOT.

ACTION: Notice of proposed rulemaking (NPRM).

-----------------------------------------------------------------------

SUMMARY: PHMSA proposes to amend the Hazardous Materials Regulations to 
maintain alignment with international standards by incorporating 
various amendments, including changes to proper shipping names, hazard 
classes, packing groups, special provisions, packaging authorizations, 
air transport quantity limitations, and vessel stowage requirements. 
These revisions are necessary to harmonize the Hazardous Materials 
Regulations with recent changes made to the International Maritime 
Dangerous Goods Code, the International Civil Aviation Organization's 
Technical Instructions for the Safe Transport of Dangerous Goods by 
Air, the United Nations Recommendations on the Transport of Dangerous 
Goods--Model Regulations and subsequently address three petitions for 
rulemaking.

DATES: Comments must be received by October 24, 2014.

ADDRESSES: You may submit comments by any of the following methods:
    Federal Rulemaking Portal: http://www.regulations.gov. Follow the 
on-line instructions for submitting comments.
    Fax: 1-202-493-2251.
    Mail: Docket Management System; U.S. Department of Transportation, 
Dockets Operations, M-30, Ground Floor, Room W12-140, 1200 New Jersey 
Avenue SE., Washington, DC 20590-0001.
    Hand Delivery: To U.S. Department of Transportation, Dockets 
Operations, M-30, Ground Floor, Room W12-140, 1200 New Jersey Avenue 
SE., Washington, DC 20590-0001 between 9 a.m. and 5 p.m. Monday through 
Friday, except Federal holidays.
    Instructions: Include the agency name and docket number PHMSA-2014-
2013-0260 (HM-215M) or RIN 2137-AF05 for this rulemaking at the 
beginning of your comment. Note that all comments received will be 
posted without change to http://www.regulations.gov including any 
personal information provided. If sent by mail, comments must be 
submitted in duplicate. Persons wishing to receive confirmation of 
receipt of their comments must include a self-addressed stamped 
postcard.
    Privacy Act: Anyone is able to search the electronic form of any 
written communications and comments received into any of our dockets by 
the name of the individual submitting the document (or signing the 
document, if submitted on behalf of an association, business, labor 
union, etc.). You may review DOT's complete Privacy Act Statement in 
the Federal Register published on April 11, 2000 (65 FR 19477), or you 
may visit http://www.regulations.gov.
    Docket: You may view the public docket through the Internet at 
http://www.regulations.gov or in person at the Docket Operations office 
at the above address (See ADDRESSES).

FOR FURTHER INFORMATION CONTACT: Steven Webb, Office of Hazardous 
Materials Standards or Vincent Babich, International Standards, 
telephone (202) 366-8553, Pipeline and Hazardous Materials Safety 
Administration, U.S. Department of Transportation, 1200 New Jersey 
Avenue SE., 2nd Floor, Washington, DC, 20590-0001.

SUPPLEMENTARY INFORMATION:
I. Executive Summary
II. Background
III. Harmonization Proposals in This NPRM
IV. Amendments Not Being Considered for Adoption in This NPRM
V. Section-by-Section Review
VI. Regulatory Analyses and Notices
    A. Statutory/Legal Authority for the Rulemaking
    B. Executive Orders 12866 and 13563 and DOT Regulatory Policies 
and Procedures
    C. Executive Order 13132
    D. Executive Order 13175
    E. Regulatory Flexibility Act, Executive Order 13272, and DOT 
Policies and Procedures
    F. Paperwork Reduction Act
    G. Regulatory Identifier Number (RIN)
    H. Unfunded Mandates Reform Act
    I. Environment Assessment
    J. Privacy Act
    K. Executive Order 13609 and International Trade Analysis

I. Executive Summary

    PHMSA proposes to amend the HMR to maintain alignment with 
international regulations and standards by incorporating various 
amendments, including changes to proper shipping names, hazard classes, 
packing groups, special provisions, packaging authorizations, air 
transport quantity limitations, and vessel stowage requirements. This 
rulemaking project is part of our ongoing biennial process to harmonize 
the Hazardous Materials Regulations (HMR; 49 CFR parts 171 to 180) with 
international regulations and standards.
    Federal law and policy strongly favor the harmonization of domestic 
and international standards for hazardous materials transportation. The 
Federal hazardous materials transportation law (Federal hazmat law; 49 
U.S.C. 5101 et seq.) permits PHMSA to depart from international 
standards to promote safety or other overriding public interest, but 
otherwise requires PHMSA to align the HMR with international transport 
standards and requirements to the extent practicable (see 49 U.S.C. 
5120).
    Harmonization facilitates international trade by minimizing the 
costs and other burdens of complying with multiple or inconsistent 
safety requirements for transportation of hazardous materials to and 
from the United States and becomes increasingly important as the volume 
of hazardous materials transported in international commerce grows. By 
facilitating compliance, harmonization also tends to enhance safety for 
international movements, but only if the international standards 
provide an appropriate level of safety. PHMSA actively participates in 
the development of international standards for the transportation of 
hazardous materials, frequently advocating the adoption in 
international standards of particular HMR requirements.
    When considering the adoption of international standards under the 
HMR, we review and consider each amendment on its own merit, on the 
basis of its overall impact on transportation safety, and the economic 
implications associated with its adoption into the HMR. Our goal is to 
harmonize without diminishing the level of safety currently provided by 
the HMR and without imposing undue burdens on the regulated community.
    This NPRM proposes to amend the HMR to maintain alignment with 
various international standards. The following are some of the more 
noteworthy proposals in this NPRM:
     Incorporate Revised Standards: PHMSA proposes to 
incorporate by reference the newest versions of various international 
hazardous materials standards including the 2015-2016 International 
Civil Aviation Organization Technical Instructions for the Safe 
Transport of Dangerous Goods by Air (ICAO TI), Amendment 37-14 to the 
International Maritime Dangerous Goods Code (IMDG Code), the

[[Page 50743]]

International Atomic Energy Agency (IAEA) Safety Standards for 
Protecting People and the Environment; Regulations for the Safe 
Transport of Radioactive Material, No. SSR-6, (IAEA Regulations), 2012 
Edition, and the 18th Revised Edition of the United Nations 
Recommendations on the Transport of Dangerous Goods (UN Model 
Regulations). Additionally, we are proposing to update our 
incorporation by reference of the Canadian Transportation of Dangerous 
Goods Regulations to include Amendment 8 (SOR/2011-239) published 
November 9, 2011; Amendment 9 (SOR/2011-60) published March 16, 2011; 
Amendment 10 (SOR/2011-210) published October 12, 2011; and Amendment 
11 (SOR/2012-245) published November 9, 2012. Finally, in this NPRM, 
PHMSA is proposing the adoption of updated International Standards 
Organization (ISO) standards.
     Revise HMT Entries: In this NPRM, PHMSA proposes 
amendments to the Sec.  172.101 Hazardous Materials Table (HMT) to add, 
revise, or remove certain proper shipping names, hazard classes, 
packing groups, special provisions, packaging authorizations, bulk 
packaging requirements, passenger and cargo aircraft maximum quantity 
limits. The proposed changes to the HMT mirror recent changes in the 
Dangerous Goods list of the 18th Revised Edition of the UN Model 
Regulations, the IMDG Code, and the ICAO TI.
     Provide Exceptions for Marine Pollutants: PHMSA is 
proposing an exception from the HMR for marine pollutants up to 5 l 
(1.3 gal) for liquids or 5 kg (11 lbs.) for solids when these materials 
are packaged in accordance with the general packaging requirements of 
Sec. Sec.  173.24 and 173.24a. The proposed amendment would exempt 
small packages of hazardous material from the HMR that are regulated 
only because of the presence of one or more marine pollutants. 
Materials in these quantities pose a low risk in transport and this 
proposal simplifies the current exceptions for marine pollutants and 
reduces impediments to multi-modal transport of these goods. The 
proposed changes to the HMT mirror recent changes in the Dangerous 
Goods list of the 18th Revised Edition of the UN Model Regulations, the 
IMDG Code, and the ICAO TI.
     Modification of the Marine Pollutant List: PHMSA is 
proposing to modify the list of marine pollutants in Appendix B to 
172.101. The HMR maintain a list as the basis for regulating substances 
toxic to the aquatic environment and allow use of the criteria in the 
IMDG Code if a listed material does not meet the criteria for a marine 
pollutant. PHMSA periodically updates its list based on changes to the 
IMDG Code and evaluation of listed materials.
     Clarify Hazard Communication Size Requirements: PHMSA is 
proposing to add minimum sizes for the OVERPACK and SALVAGE markings. 
These markings would be characters at least 12 mm (.47 inches) high. 
There is no minimum size for these marks currently in the HMR, and the 
information is not always readily visible. Further, the HMR already 
prescribe specific size requirements for the ``UN'' or ``NA'' markings 
and package specification markings. This proposal is a logical 
extension of existing requirements. To offset any increased cost 
associated with the proposed size requirements, PHMSA will propose to 
permit a permanently marked salvage package or overpack to remain in 
service with its existing marks regardless of whether the 
identification number markings meet the minimum size requirements.
     Revise Vessel Stowage Requirements: PHMSA is proposing to 
revise and add vessel stowage codes listed in column 10B of the HMT and 
segregation requirements in Sec.  176.83 consistent with the IMDG Code. 
These changes would harmonize the HMR with the IMDG Code and would 
provide additional guidance on the loading and stowage of various 
materials. Additionally, we propose to increase the required 
segregation distances between Division 4.3 dangerous when wet material 
(i.e. materials liable to give off a flammable or toxic gas in contact 
with water) and Class 3 flammable liquids and Division 2.1 flammable 
gases.
     Addition of Entries for Adsorbed Gases in the Hazardous 
Materials Table: Consistent with amendments adopted into the UN Model 
Regulations, PHMSA is proposing to revise the Hazardous Materials Table 
(HMT) in Sec.  172.101 to include seventeen new entries for adsorbed 
gases. Additionally we propose to add into the HMR a definition for 
adsorbed gas, authorized packagings, and safety requirements including 
but not limited to quantity limitations and filling limits.
     Harmonized Requirements for Lithium Batteries: PHMSA 
proposes harmonization with the latest version of the ICAO Technical 
Instructions to ensure that the information currently authorized by the 
HMR to be provided by means of an alternative document be included on a 
shipping paper for batteries transported under the provisions of 49 CFR 
173.185(c)(4)(v)--equivalent to Section IB of ICAO Packing Instructions 
965 and 968. PHMSA also proposes to harmonize with the latest version 
of the ICAO Technical Instructions by requiring a ``CARGO AIRCRAFT 
ONLY'' label on packages containing small lithium metal batteries not 
packed in or with equipment.
     Definition of Non-Bulk Packaging: PHMSA proposes to revise 
the HMR definition of non-bulk packaging by adding a new paragraph (4) 
to include bags and boxes conforming to the applicable requirements for 
specification packagings in subpart L of part 178 of this subchapter, 
if they have a maximum net mass of 400 kg (882 pounds) or less. The UN 
Model regulations were revised to remove the volumetric limit for 
certain packaging types considered in Part 6 of the UN Model 
Regulations that would be considered non-bulk packagings under the HMR. 
This change was based on recognition by the UN Transport of Dangerous 
Goods Sub-Committee that there are packagings suitable for the 
transportation of high volume, low mass materials (e.g., airbags).
    If the amendments in this proposed rule are not adopted in the HMR 
by January 1, 2015, the date most of the international standards above 
take effect, U.S. companies, including numerous small entities 
competing in foreign markets, will be at an economic disadvantage. 
These companies will be forced to comply with a dual system of 
regulations. The amendments proposed in this rulemaking are intended to 
avoid this result.
    If adopted in a final rule, the amendments proposed in this NPRM 
will result in minimal burdens on the regulated community. The benefits 
resulting from the adoption of the amendments include enhanced 
transportation safety resulting from the consistency of domestic and 
international hazard communication and continued access to foreign 
markets by U.S. manufacturers of hazardous materials. The majority of 
amendments in this NPRM should result in cost savings and ease the 
regulatory compliance burden for shippers engaged in domestic and 
international commerce, including trans-border shipments within North 
America.
    PHMSA solicits comments on the need for these amendments and others 
proposed in this NPRM. Specifically, PHMSA requests comments on the 
benefits and costs of international harmonization, including the impact 
on safety and any other relevant concerns regarding the amendments 
proposed in this NPRM. In addition, PHMSA solicits comment from the 
regulated community regarding approaches to reducing the

[[Page 50744]]

costs of this rule while maintaining or increasing the benefits. In its 
preliminary analysis, PHMSA concluded that the aggregate benefits 
justify the aggregate costs as a result of the amendments proposed in 
this NPRM. Nonetheless, PHMSA solicits public comment on specific 
changes (for example, greater flexibility with regard to a particular 
amendment) that might improve the rule.

II. Background

    In a final rule published December 21, 1990 (Docket HM-181; 55 FR 
52402), the Research and Special Programs Administration (RSPA), the 
predecessor agency to PHMSA, comprehensively revised the HMR to 
harmonize U.S. hazardous materials transportation requirements with the 
UN Model Regulations. The UN Model Regulations constitute a set of 
recommendations issued by the United Nations Subcommittee of Experts 
(UNSCOE) on the Transport of Dangerous Goods and the Globally 
Harmonized System of Classification and Labelling of Chemicals (GHS). 
The UN Model Regulations are amended and updated biennially by the 
UNSCOE and serve as the basis for national, regional, and international 
modal regulations, including the IMDG Code and the ICAO TI.
    Since publication of the 1990 rule, PHMSA has issued ten additional 
international harmonization rulemakings under Dockets: HM-215A [59 FR 
67390]; HM-215B [62 FR 24690]; HM-215C [64 FR 10742]; HM-215D [66 FR 
33316]; HM-215E [68 FR 44992]; HM-215G [69 FR 76044]; HM-215I [71 FR 
78595]; HM-215J [74 FR 2200]; HM-215K [76 FR 3308]; and HM-215L [78 FR 
987]. These rulemakings were based on biennial updates of the UN Model 
Regulations, the IMDG Code, and the ICAO TI.
    Federal law and policy strongly favor the harmonization of domestic 
and international standards for hazardous materials transportation. The 
Federal hazardous materials transportation law (Federal hazmat law; 49 
U.S.C. 5101 et seq.) directs PHMSA to participate in relevant 
international standard-setting bodies and encourages alignment of the 
HMR with international transport standards to the extent practicable 
while recognizing that deviations may at times be necessary to ensure 
safety or be consistent with the public interest (see 49 U.S.C. 5120). 
Harmonization facilitates international trade by minimizing the costs 
and other burdens of complying with multiple or inconsistent safety 
requirements for transportation of hazardous materials. Harmonization 
has also become increasingly important as the volume of hazardous 
materials transported in international commerce grows. By facilitating 
compliance, harmonization enhances safety. PHMSA actively participates 
in relevant international standard-setting bodies and promotes the 
adoption of standards consistent with the high safety standards set by 
the HMR.
    When considering alignment of the HMR with international standards, 
we review and evaluate each amendment on its own merit, on the basis of 
its overall impact on transportation safety, and the on the basis of 
the economic implications associated with its adoption into the HMR. 
Our goal is to harmonize without diminishing the level of safety 
currently provided by the HMR or imposing undue burdens on the 
regulated community.
    Based on this review and evaluation, in this NPRM PHMSA is 
proposing to revise the HMR to incorporate changes from the 18th 
Revised Edition of the UN Model Regulations, Amendment 37-14 to the 
IMDG Code, and the 2015-2016 Edition of the ICAO Technical 
Instructions, which become effective January 1, 2015 (The IMDG Code is 
effective January 1, 2015; however, the previous amendment may continue 
to be used until January 1, 2016).
    In addition, PHMSA proposes to incorporate by reference the newest 
editions of various international standards. These standards 
incorporated by reference are authorized for use, under specific 
circumstances, in Subpart C of Part 171 of the HMR. This proposed rule 
is necessary to incorporate revisions to the international standards 
and, if adopted in the HMR, will be effective January 1, 2015.

Possible Interim Final Rule

    If the changes in this proposed rule are not adopted by January 1, 
2015, U.S. companies, including numerous small entities competing in 
foreign markets, would be at an economic disadvantage because these 
companies would be forced to comply with a dual system of regulations 
(specifically, the U.S. HMR, UN Model Regulations, and ICAO Technical 
Instructions). As previously noted, the changes to the international 
standards will take effect on January 1, 2015. Therefore, it is 
essential that a final rule incorporating these standards by reference 
be published no later than December 31, 2014 with an effective date of 
January 1, 2015. To this end, if it appears a final rule under this 
docket will not be published prior to January 1, 2015, PHMSA will 
publish a bridging document in the form of an interim final rule to 
amend the HMR by incorporating the 18th Revised Edition of the UN 
Recommendations and the 2015-2016 Edition of the ICAO Technical 
Instructions.
    With regard to Amendment 37-14 of the IMDG Code, the International 
Maritime Organization approved an implementation date of January 1, 
2016. The current edition of the IMDG Code (Amendment 36-12) remains in 
effect through 2015 and, therefore, the newest version of the IMDG Code 
will not be included in any bridging document. The proposed 
incorporation by reference of the newest edition of the IMDG Code and 
all other changes proposed in this NPRM would be addressed in a 
subsequent final rule also under this Docket, PHMSA-2013-0260 (HM-
215M). Accordingly, any interim final rule will only incorporate by 
reference editions of the international standards that become effective 
on January 1, 2015.

III. Harmonization Proposals in This NPRM

    In addition to various other revisions to the HMR, in this NPRM, 
PHMSA is proposing the following amendments to harmonize the HMR with 
the most recent revisions to the UN Model Regulations, ICAO TI, and the 
IMDG Code:

Hazardous Materials Table (HMT)

    In this NPRM, PHMSA proposes amendments to the HMT to add, revise, 
or remove certain proper shipping names, hazard classes, packing 
groups, special provisions, packaging authorizations, bulk packaging 
requirements, vessel stowage and segregation requirements, and 
passenger and cargo aircraft maximum quantity limits.

Incorporation by Reference

    In this NPRM, PHMSA proposes to incorporate by reference the latest 
editions of various international transport standards including the 
2015-2016 Edition of the ICAO Technical Instructions, Amendment 37-14 
of the IMDG Code, and the 18th Revised Edition of the UN Model 
Regulations. Additionally, we are proposing to update our incorporation 
by reference of the Canadian Transportation of Dangerous Goods 
Regulations to include Amendment 8 (SOR/2011-239) published November 9, 
2011; Amendment 9 (SOR/2011-60) published March 16, 2011; Amendment 10 
(SOR/2011-210) published October 12, 2011; and Amendment 11 (SOR/2012-
245) published November 9, 2012.

[[Page 50745]]

This incorporation by reference augments the broad reciprocity provided 
in Sec.  171.12 where the HMR allow the use of the Canadian TDG 
Regulations under certain conditions when transporting hazardous 
materials to or from Canada by highway or rail. Finally, PHMSA is 
proposing the incorporation by reference of new and updated 
International Standards Organization (ISO) standards.
    Petitions for Rulemaking: In this NPRM, PHMSA is addressing three 
petitions for rulemaking:

Alignment of the HMR With the ICAO TI To Remove the Segregation 
Requirements in Sec.  175.630 (P-1631)

    In a petition for rulemaking (P-1631), UPS, Inc. requests that 
PHMSA align with the ICAO TI by removing the Sec.  175.630 provisions 
requiring Division 6.1 and 6.2 packages to be segregated from materials 
marked as or known to be a foodstuff, feed, or any other edible 
material intended for consumption by humans or animals.
    Section 175.630 imposes special segregation requirements for 
Division 6.1 (toxic) material and Division 6.2 (infectious substance) 
materials when transported by aircraft. Paragraph (a) requires that a 
package required to bear a POISON, POISON INHALATION HAZARD, or 
INFECTIOUS SUBSTANCE label may not be carried in the same compartment 
of an aircraft with material which is marked as or known to be a 
foodstuff, feed, or any other edible material intended for consumption 
by humans or animals unless:
    (1) The Division 6.1 or Division 6.2 material and the foodstuff, 
feed, or other edible material are loaded in separate unit load devices 
which, when stowed on the aircraft, are not adjacent to each other; or
    (2) The Division 6.1 or Division 6.2 material are loaded in one 
closed unit load device and the foodstuff, feed or other material is 
loaded in another closed unit load device.
    The petitioner notes that during 2012-2013 biennium, the ICAO 
Dangerous Goods Panel (DGP) determined that the high quality of 
packaging for Division 6.1 and 6.2 material required by the ICAO TI 
justified removal of the segregation requirements applied to Division 
6.1 or Division 6.2 material and foodstuffs. The petitioner states that 
the alignment of the HMR with the ICAO TI on the matter of operator 
requirements is of great value for aircraft operators. In addition, the 
petitioner states that this amendment has the potential to introduce 
efficiencies for air carriers, including UPS. In this context, with the 
deletion of ICAO TI Part 7, Section 2.9, the petitioner recommends and 
requests that PHMSA remove the corresponding requirements of Sec.  
175.630.
    PHMSA is in agreement with the petitioner and in this NPRM, is 
proposing to delete the special segregation requirements for Division 
6.1 and Division 6.2 material. This action would harmonize the HMR with 
recent amendments that will appear in the 2015-2016 Edition of the ICAO 
TI. These segregation requirements are no longer necessary, and we 
propose to harmonize with ICAO because of: (1) The relative rarity of 
releases of toxic and infectious substances; (2) the small quantities 
released when a spill actually occurs; (3) the robust nature of 
combination packagings used for toxic and infectious substances; (4) 
the acceptance checks required by operators prior to loading hazardous 
materials aboard aircraft; (5) the lack of evidence of contamination of 
other packages by a release of toxic or infectious substances; and (6) 
the coverage by the hazard communication system already in place in the 
event of a release.

Passenger Notification Programs for Tickets Issued by Phone (P-1623)

    In a petition for rulemaking (P-1623), the Council on Safe 
Transportation of Hazardous Articles (COSTHA) requests that PHMSA 
remove the applicability of passenger notifications in Sec.  175.25(b) 
to telephone transactions.
    In a final rule published January 19, 2011 under Docket No. PHMSA-
2009-0126 (HM-215K); 76 FR 3308, PHMSA aligned with the ICAO TI by 
adding new requirements for certain information to be presented to 
passengers regarding what hazardous materials they may check-in or 
carry-on a flight. This information is to be provided at points of 
ticket sale and at automated or remote passenger check-in. On March 7, 
2013, PHMSA received a request for a letter of interpretation 
(Reference 13-00058) from COSTHA pointing out that the January 19, 2011 
final rule in Sec.  175.25 (b) includes the word ``phone'' which is not 
in Part 7; 5.1.1 of the ICAO TI, nor is it part of the current scope of 
passenger notification programs. COSTHA requested clarification as to 
whether or not PHMSA intended the Sec.  175.25(b) requirement to be 
applicable to passenger notification by telephone. In the July 11, 2013 
response, PHMSA stated that Sec.  175.25(b) explicitly references 
purchase by telephone as a means of purchasing a ticket remotely. 
Therefore, as written, the Sec.  175.25(b) passenger notification and 
acknowledgement requirements apply when purchasing a ticket by 
telephone and this is generally consistent with Part 7; 5.1.1 of the 
ICAO TI. This petition was submitted in response to the letter of 
interpretation issued by PHMSA on July 11, 2013 (Reference 13-0058).
    In its petition, COSTHA states that they strongly disagree with 
PHMSA's position that inclusion of the term ``phone'' in Sec.  
175.25(b) is ``generally consistent'' with the language adopted in Part 
7; 5.1.1 of the ICAO TI, and that PHMSA has not fully recognized or 
accounted for the significant costs such an interpretation would impose 
on industry and the competitive disadvantage that would result for U.S. 
passenger air carriers. The petitioner notes that the issue of ticket 
purchase and check-in on line was discussed within a working group of 
the ICAO DGP (May 2009) and that the discussion only pertained to 
electronic transactions, not telephone transactions. The report from 
the meeting specifically states ``when purchasing tickets or checking 
in electronically.'' The report includes comments from DGP members 
questioning who would enforce the requirement against internet-based 
travel agencies. There is no reference to ticket purchases made via 
telephone. At the 22nd meeting of the ICAO DGP (October 2009), ICAO 
adopted modifications to Part 7; 5.1 to bolster communication to 
passengers who purchase tickets or check-in electronically. Paragraph 
2.8.2.1 from the DGP 22 report states:

    A proposal to strengthen the requirements for the provision of 
information to passengers in respect of dangerous goods in baggage 
was discussed. It was suggested the use of the Internet to purchase 
tickets, to check in, and the use of automated check-in machines at 
the airport or by telephone made traditional methods of providing 
information to passengers obsolete. New text in Part 7;5.1 was 
developed to address this.

    The petitioner notes that DGP 23 report contains the first 
reference to the use of telephones, and in this case it is in reference 
to passenger check-ins, not ticket purchase. Further revisions to the 
ICAO TI text resulted in mandatory requirements. However, the context 
of these discussions was again regarding electronic transactions, not 
via the telephone. The petitioner states based on the information 
contained in the ICAO reports that it was not the intention of ICAO to 
require extensive hazard communication during telephonic ticket 
purchases.
    The petitioner states that by extending the application of 
notification to passengers to telephonic ticket purchases, PHMSA is 
imposing

[[Page 50746]]

significant training and implementation costs on industry and that 
these costs may not have been fully considered. In the petition, COSTHA 
includes estimated costs from three member air carriers for providing 
passenger notification via telephonic communication. One carrier 
estimated an annual cost increase of $17 million, another $750,000, and 
the third $450,000 a year for every second added to talk time. These 
figures do not include employee training costs. In addition, these 
three airlines provided data that between 3% and 5.1% of tickets are 
purchased over the phone. The petitioner points out that the vast 
majority of tickets are purchased on-line, and when purchased in this 
manner, passengers are notified about hazardous materials at the time 
of purchase, during check-in, and again via an announcement at the 
gate. The petitioner states that extending these requirements to 
telephone transactions will significantly increase costs to industry 
while reaching only 5% of passengers purchasing tickets.
    In this NPRM, PHMSA is proposing to grant this petition by adopting 
into the HMR the revisions made to the passenger notification 
provisions of Part 7;5.1 of the ICAO TI adopted at the 24th meeting of 
ICAO DGP (October 2013). Paragraph 2.7.3.1 from the DGP 24 report 
states:

    It was suggested that text which had existed in Part 7;5.1 prior 
to the 2011-2012 Edition of the Technical Instructions had been 
inadvertently removed and should be reinstated. Part 7;5.1 was 
amended in the 2011-2012 Edition to address the increasing use of 
the internet for flight bookings and check-in, the use of telephones 
and kiosks at airports for check-in. It was suggested, however, that 
the new text did not address cases when a passenger might make a 
booking over the telephone with the operator providing the dangerous 
goods information with a booking confirmation by post or email.

    Specifically, PHMSA is proposing to revise Sec.  175.25(b) for 
consistency with the ICAO TI to clarify that for ticket purchases the 
hazardous materials notification must be presented at the point of 
ticket purchase or, if this not practical, made available in another 
manner to passengers prior to the check-in process. This will allow an 
operator to provide the hazardous materials notification verbally, with 
the ticket or ticket receipt, or using another equally suitable method. 
In addition, PHMSA is proposing to remove the words ``regardless if the 
process is completed remotely (e.g., via the Internet and Phone) or 
when completed at the airport, with or without assistance from another 
person (e.g., automated check in facility)'' as examples of ticket 
purchases to fully harmonize Sec.  175.25(b) with the ICAO TI, and to 
clarify that the hazardous materials notification must be given with 
every ticket purchase. Finally, it is proposed to insert the words 
``provided via the internet'' into the second sentence of Sec.  
175.25(b) to clarify that passenger acknowledgement is only required 
when the ticket is purchased through the internet without assistance 
from another person. All of these proposed changes taken together will 
address the COSTHA petition and bring the HMR into full alignment with 
the ICAO TI.

Compliance Date Extension for Passenger Notification Programs (P-1633)

    In a petition for rulemaking (P-1633), COSTHA requests that PHMSA 
extend the transitional compliance date for ``hazardous materials 
notifications to passengers at time of ticket purchase,'' which was 
adopted in a January 19, 2011 final rule (Docket No. PHMSA-2009-0126 
(HM-215K); 76 FR 3308) and extended to January 1, 2015 in a final rule 
published January 7, 2013 (Docket No. PHMSA-2009-0126 (HM-215K); 78 FR 
1108). Specifically, COSTHA requests the current compliance date for 
passenger notifications requirements in Sec.  175.25 be extended from 
January 1, 2015 until 12 months from the effective date of the HM-215M 
final rule publication, or January 1, 2016, whichever is later.
    The petitioner states on April 30, 2013, the Federal Aviation 
Administration (FAA) chartered an Aviation Rulemaking Committee (ARC) 
on Passenger Notification of Hazardous Materials Regulations with a 
mission to develop consistent and effective messages for disseminating 
hazardous materials information to passengers and provide air carriers 
additional clarity to ensure regulatory compliance. The FAA timeline 
for the ARC and publication of the draft advisory circular was 
developed to provide air carriers eight months to implement the 
recommendations, employee training, program changes and to make 
necessary technology updates. Due to additional amendments to the 
passenger notification requirements of the ICAO TI the implementation 
and subsequent consideration for harmonization under this proposed rule 
the timeline established by the FAA was delayed. Given this delay, air 
carriers will not be provided sufficient time to implement changes 
necessary to comply with the modified Sec.  175.25.
    In this NPRM, PHMSA is proposing to revise Sec.  175.25(b) for 
consistency with recent amendments to the ICAO TI to clarify that for 
ticket purchases made via the telephone, the hazardous materials 
notification must be provided to the passenger but can be done so using 
any suitable method prior to the check-in. Due to this revision, the 
extension requested in this petition is unnecessary. The requirement 
for air carrier reservation agents to verbally provide passenger 
notification at the time of purchase by telephone was the basis for the 
effective date extension granted in the January 7, 2013 final rule (HM-
215K). By removing the telephonic acknowledgement requirement, the 
previous effective date of January 1, 2015 will be waived as of 
publication. Other than the telephonic acknowledgement requirement, 
PHMSA is unaware of any additional new requirement imposed under HM-
215K that has posed difficulty in implementation that would merit 
providing additional compliance date relief. Further, proposed 
amendments to Sec.  175.25 in this rulemaking are eligible for the one 
year delayed compliance.

IV. Amendments Not Being Considered for Adoption in this NPRM

    This NPRM proposes changes to the HMR based on amendments adopted 
in the 18th Revised Edition of the UN Model Regulations, the 2015-2016 
Edition of the ICAO Technical Instructions, and Amendment 37-14 to the 
IMDG Code. We are not, however, proposing to adopt all the amendments 
made to the various international standards into the HMR.
    In many cases, amendments to the international recommendations and 
regulations have not been adopted because the framework or structure of 
the HMR makes adoption unnecessary. In other cases, we have addressed, 
or will address, the amendments in separate rulemaking proceedings. If 
we have inadvertently omitted an amendment in this NPRM, we will 
attempt to include the omission in the final rule. However, our ability 
to make changes in a final rule is limited by requirements of the 
Administrative Procedure Act (5 U.S.C. 553). In some instances, we can 
adopt a provision inadvertently omitted in the NPRM if it is clearly 
within the scope of changes proposed in the notice. Otherwise, in order 
to provide opportunity for notice and comment, the change must first be 
proposed in an NPRM.
    One of the goals of this rulemaking is to continue to maintain 
consistency between the HMR and the international requirements. We are 
not striving to make the HMR identical to the international regulations 
but rather to

[[Page 50747]]

remove or avoid potential barriers to international transportation.
    The following is a list of significant amendments to the 
international regulations that we are not proposing to adopt in this 
NPRM, with a brief explanation of why the amendment was not included:

Damaged, Defective, and Waste Lithium Batteries

    The 18th Revised Edition of the UN Model Regulations adopted 
transportation provisions for damaged, defective, and waste lithium 
batteries. In this NPRM, PHMSA is not proposing to adopt changes to the 
domestic requirements for the treatment of these lithium batteries, as 
we believe existing HMR requirements sufficiently address shipments of 
this nature.

Dimensions on Hazard Communication Examples

    The 18th Revised Edition of the UN Model Regulations adopted 
modifications to example figures of markings, labels, and placards to 
note minimum dimensions for the appropriate hazard communication 
example pictograms. In this NPRM, PHMSA is not proposing to adopt the 
changes to example markings, labels, and placards found in the HMR. We 
believe the addition of dimensions to the example pictograms does not 
add significant value because these dimensions are described in the 
text of the HMR. These amendments to the international recommendations 
and regulations are not being adopted because the regulatory text 
associated with the various figures in the HMR depicting package 
markings, labels and placards adequately describes the item without 
adding minimum dimensions to the example figures.

Flash Composition

    The 18th Revised Edition of the UN Model Regulations amended a note 
before the default fireworks classification table in 2.1.3.5.5. This 
amendment changed the criteria used in the meaning of ``flash 
composition'' from 8 ms for .5 g of pyrotechnic substance in the HSL 
Flash Composition Test in Appendix 7 of the Manual of Tests and 
Criteria, to 6 ms for .5 g of pyrotechnic substance. In this NPRM, 
PHMSA is not adopting this change as work on this test is ongoing.

Radioactive Materials Transportation Requirements

    The 18th Revised Edition of the UN Model Regulations, the 2015-2016 
Edition of the ICAO Technical Instructions, and Amendment 37-14 to the 
IMDG Code amended various radioactive transportation requirements to 
harmonize their regulations with the International Atomic Energy Agency 
(IAEA) Safety Standards for Protecting People and the Environment; 
Regulations for the Safe Transport of Radioactive Material, No. SSR-6. 
While PHMSA is proposing to incorporate by reference this document (see 
Sec.  171.7) and adopt the new proper shipping name and associated 
shipping requirements for UN 3507, Uranium hexafluoride, radioactive 
material, excepted package, we are not proposing to harmonize the HMR 
with the remainder of the changes made by the various international 
regulations in this NPRM. Any further domestic radioactive 
harmonization issues will be addressed in a future rulemaking in 
conjunction with the Nuclear Regulatory Commission.

Discarded Packages

    The 18th Revised Edition of the UN Model Regulations adopted a new 
proper shipping name and UN number for Packaging discarded, empty, 
uncleaned, UN 3509. This new proper shipping name was brought in to 
allow, with competent authority approval, packagings, large packagings 
or intermediate bulk containers, or parts thereof, which have contained 
hazardous materials, other than radioactive material to be transported 
for disposal, recycling or recovery of their material, other than 
reconditioning, repair, routine maintenance, remanufacturing or reuse, 
and which have been emptied to the extent that only residues of 
dangerous goods adhering to the packaging parts are present when they 
are presented for transport. This change was made primarily to address 
European land transport of packages that are no longer within 
appropriate package specifications. The ICAO DGP did not incorporate 
this entry into the ICAO TI dangerous goods list, and the IMDG Code has 
adopted very limited allowance for the use of this entry on short sea 
voyages.
    PHMSA is not proposing to include a hazardous materials table entry 
for UN 3509 Packaging discarded, empty, uncleaned. We believe that the 
shipment of empty uncleaned packaging is adequately addressed by HMR 
under existing empty packaging provisions in Sec.  173.29 and 
additional sections. Use of this description in the UN Model 
Regulations requires authorization by the competent authority, which 
can still be obtained from PHMSA via a special permit.

Used Medical Devices

    In the 2015-2016 Edition of the ICAO TI a note was added to an 
exception for used medical devices which excepts medical devices or 
equipment that have been drained of free liquid to the extent 
practicable; and clarifying that any capability requirement in the ICAO 
TI can be determined through testing a sample package as prepared for 
transport, or through alternative means such as non-destructive 
testing, engineering analysis, testing with an article of similar mass 
and size, or other equivalent means. PHMSA is not making any 
corresponding amendments to Sec.  173.134, as we believe the existing 
HMR satisfactorily addresses the hazards presented by used medical 
devices in transportation.

Coolants, Conditioners, and Asphyxiates

    The 18th Revised Edition of the UN Model Regulations contains 
various editorial amendments applicable to packages and cargo transport 
units containing substances presenting a risk of asphyxiation when used 
for cooling or conditioning purposes. PHMSA did not adopt requirements 
for these shipments instituted in the 17th Revised Edition of the UN 
Model Regulations, and will not be adopting any of the editorial 
amendments incorporated into the 18th UN Model Regulations either. 
PHMSA believes that the current requirements for shipments of dry ice 
and other potential coolants adequately address the hazards associated 
with the use of these hazardous materials as coolants or conditioners.

Gas Cartridge and Fuel Cell Testing

    The 18th Revised Edition of the UN Model Regulations was amended to 
authorize alternatives to the water bath test for gas cartridges and 
fuel cells. PHMSA believes that the current requirements provided by 
the HMR for testing these items adequately address the hazards 
associated with their use.

V. Section-by-Section Review

    The following is a section-by-section review of the amendments 
proposed in this NPRM:

Part 171

    Section 171.4 prohibits the transportation of materials meeting the 
definition of a marine pollutant except in accordance with HMR 
requirements. Paragraph (c) provides that marine pollutants transported 
in non-bulk packagings are excepted from the HMR unless the 
transportation is by vessel. In this NPRM, PHMSA proposes a new 
exception from the HMR for marine

[[Page 50748]]

pollutants up to 5 l (1.3 gallons) for liquids or 5 kg (11 lbs) for 
solids when these materials are packaged in accordance with the general 
packaging requirements of Sec. Sec.  173.24 and 173.24a. This proposed 
amendment, applicable to all modes, would exempt small packages of 
hazardous material from the HMR that are regulated only because of the 
presence of one or more marine pollutants. Materials in these 
quantities pose a low risk in transport and this proposal simplifies 
the current exceptions for marine pollutants and reduces impediments to 
multi-modal transport of these goods.
Section 171.7
    The ``National Technology Transfer and Advancement Act of 1996'' 
directs agencies to use voluntary consensus standards. According to the 
Office of Management and Budget (OMB), Circular A-119, ``Federal 
Participation in the Development and Use of Voluntary Consensus 
Standards and in Conformity Assessment Activities,'' government 
agencies must use voluntary consensus standards wherever practical in 
the development of regulations. Agency adoption of industry standards 
promotes productivity and efficiency in government and industry, 
expands opportunities for international trade, conserves resources, 
improves health and safety, and protects the environment.
    To these ends, PHMSA actively participates in the development and 
updating of consensus standards through representation on more than 20 
consensus standard bodies. PHMSA regularly reviews updated consensus 
standards and considers their merit for inclusion in the HMR.
    Section 171.7 provides a listing of all standards incorporated by 
reference into the HMR. For this rulemaking, we evaluated updated 
international consensus standards pertaining to proper shipping names, 
hazard classes, packing groups, special provisions, packaging 
authorizations, air transport quantity limitations, and vessel stowage 
requirements and determined that the revised standards provide an 
enhanced level of safety without imposing significant compliance 
burdens. These standards have a well-established and documented safety 
history and their adoption will maintain the high safety standard 
currently achieved under the HMR. Therefore, we propose to update by 
adding and revising the incorporation by reference materials for the 
following organizations:
    Paragraph (s)(1) which incorporates the International Atomic Energy 
Agency (IAEA) Regulations for the Safe Transport of Radioactive 
Material 1996 edition would be revised to incorporate the SSR-6 2012 
Edition. To address concerns over domestic and international 
differences in the transport conditions applicable to shipments of 
excepted fissile materials, PHMSA is proposing to add additional 
requirements to Sec.  171.23 to ensure domestic concerns are addressed. 
Please see the discussion in the Section-by-Section Review under Sec.  
171.23 for a summary of proposed changes.
    Paragraph (t)(1) which incorporates the International Civil 
Aviation Organization Technical Instructions for the Safe Transport of 
Dangerous Goods by Air, 2013-2014 Edition would be revised to 
incorporate the 2014-2015 Edition.
    Paragraph (v)(2), which incorporates the International Maritime 
Organization International Maritime Dangerous Goods Code, 2012 Edition, 
Incorporating Amendment 36-12, English Edition, Volumes 1 and 2, would 
be revised to incorporate the 2014 Edition, Amendment 37-14.
    In paragraph (w) various International Organization for 
Standardization (ISO) entries which contain standards for the 
specifications, design, construction, testing and use of gas cylinders 
are proposed for incorporation by reference.
    In paragraph (bb)(1), the Transport Canada, Transportation of 
Dangerous Goods Regulations, including Clear Language Amendments 1 
through 7 sub-paragraphs (ix), (x), (xi), and (xii), would be added to 
include Amendment 8 (SOR/2011-239) which was published on November 9, 
2011; Amendment 9 (SOR/2011-60) published March 16, 2011; Amendment 10 
(SOR/2011-210) published October 12, 2011; and Amendment 11 (SOR/2012-
245) published November 9, 2012 respectively. In the preamble of our 
January 7, 2013 final rule (HM215-L [78 FR 987]) we indicated we were 
adopting Amendments 8, 9 and 10 of the Transportation of Dangerous 
Goods Regulations, however this adoption inadvertently did not appear 
in the published regulatory text. To correct this oversight, we are 
again proposing the adoption of Amendments 8, 9 and 10, along with the 
proposed adoption of the most recent, Amendment 11.
    Paragraph (dd)(1), the United Nations Recommendations on the 
Transport of Dangerous Goods--Model Regulations, 17th Revised Edition 
(2011), Volumes I and II, would be revised to incorporate the 18th 
Revised Edition (2013), Volumes I and II.
    Paragraph (dd)(2), the United Nations Recommendations on the 
Transport of Dangerous Goods--Manual of Tests and Criteria, Fifth 
Revised Edition (2009), including Amendment 1 (2011), would be revised 
to reference Sec.  171.24, and sub-paragraph (iii) would be added to 
incorporate Amendment 2 (2013).
Section 171.8
    This section defines terms generally used throughout the HMR that 
have broad or multi-modal applicability. PHMSA is proposing to add the 
following terms:
    Adsorbed gas: The proposed adoption of this term directs the reader 
to Sec.  173.115 for the definition. See the Sec.  173.115 entry of the 
Section-by-Section Review for a complete discussion of the proposed 
adoption of the definition of adsorbed gas.
    Bundle of cylinders: Consistent with the ICAO TI, in this NPRM, 
PHMSA proposes to amend this definition to clarify that a ``bundle of 
cylinders'' is not permitted for air transport.
    Large salvage packaging: Consistent with the UN Model Regulations, 
in this NPRM, PHMSA proposes to define a large salvage packaging. A 
large salvage packaging is a special packaging into which damaged, 
defective or leaking hazardous materials packages, or hazardous 
materials that have spilled or leaked are placed for the purpose of 
transport for recovery or disposal. The general requirements for a 
large salvage packaging are consistent with the existing requirements 
for a ``large packaging.'' Large salvage packagings are not authorized 
for air transport.
    Neutron radiation detector: Consistent with the UN Model 
Regulations, in this NPRM, PHMSA proposes to define a neutron radiation 
detector. A neutron radiation detector is a device that detects neutron 
radiation. In such a device, a gas may be contained in a hermetically 
sealed electron tube transducer that converts neutron radiation into a 
measurable electric signal.
    Non-bulk packaging: The UN Model regulations were revised to remove 
the volumetric limit for certain packaging types considered in Part 6 
of the UN Model Regulations that would be considered non-bulk 
packagings under the HMR. This was based on recognition by the UN 
Transport of Dangerous Goods Sub-Committee that there are packagings 
suitable for the transportation of high volume, low mass materials 
(e.g., airbags) where the capacity of a box may exceed 450 liters (119 
gallons) while the net mass of the box is less than 400 kg (882 
pounds). Absent a corresponding amendment to the HMR, U.S. 
manufacturers and shippers would be placed at a

[[Page 50749]]

competitive disadvantage by not being authorized to use the same 
packaging configurations other than as authorized for use by Part 171 
Subpart C (use of international transport standards and regulations). 
Therefore, to maintain consistency with the UN Model Regulations, and 
to authorize the use of these packaging configurations for domestic 
transport, PHMSA proposes to revise the HMR definition of non-bulk 
packaging by adding a new paragraph (4) to include bags and boxes 
conforming to the applicable requirements for specification packagings 
in subpart L of part 178 of this subchapter, if they have a maximum net 
mass of 400 kg (882 pounds) or less. Based on our review of the UN 
Model Regulations, these are the only packagings affected by the UN 
amendment as only bags and boxes are authorized by specification to 
exceed 450 liters capacity.
    Radiation Detection System: Consistent with the UN Model 
Regulations, in this NPRM, PHMSA proposes to define a radiation 
detection system. A radiation detection system is an apparatus that 
contains radiation detectors as components.
Section 171.23
    Section 171.23 prescribes requirements for specific materials and 
packagings transported under various international standards. Section 
171.22(b)(2) requires shipments made in accordance with an authorized 
international standard or regulation to conform to all applicable 
requirements of Subpart C of Part 171.
    Paragraph (b)(2) of this section provides the requirement that the 
shipping paper description of items such as air bag inflators, air bag 
modules, and seat-belt pretensioners conform to the requirements in 
Sec.  173.166(c). Consistent with the UN Model Regulations, in this 
NPRM, PHMSA proposes to revise the proper shipping name of these items 
to read ``Safety device,'' with the addition of the term 
``pyromechanical device'' being included as a ``Safety device.'' 
Paragraph (b)(2) is being revised to reference the new proper shipping 
name, ``Safety device'' and the new term ``pyromechanical device.'' As 
a consequence of the addition of the proper shipping name ``Safety 
devices, pyrotechnic,'' and special provision 161 being removed, 
paragraph (b)(2)(ii) is removed and reserved.
    Paragraph (11) of this section prescribes additional requirements 
for shipments of radioactive materials made under authorized 
international standards or regulations. In this NPRM, PHMSA is 
proposing to incorporate by reference the 2012 IAEA SSR-6 regulations 
to allow shipments to be offered for transportation or transported 
under the most recent IAEA regulations. Several changes to the 
definition of excepted fissile materials and the requirements for its 
transport were adopted by the IAEA. Under their respective statutory 
authorities, DOT and the Nuclear Regulatory Commission (NRC) jointly 
regulate the transportation of radioactive materials to, from, and 
within the United States. The NRC has not initiated any rulemaking 
activities to address changes made by the IAEA regarding the 
transportation of excepted fissile materials. In order to maintain 
uniform treatment for shippers of excepted fissile materials, PHMSA is 
amending Sec.  171.23 to require that shipments of excepted fissile 
materials offered in accordance with the IAEA SSR-6 regulations must 
also conform to the requirements of Sec.  173.453.
Section 171.24
    Section 171.24 details additional requirements for the use of the 
ICAO TI. In this NPRM, PHMSA is proposing to amend the marking 
requirement for packages containing primary lithium batteries and cells 
that meet the exceptions in paragraph (d)(1)(ii). Packages meeting 
these exceptions currently are required to be marked with an indication 
that they contain lithium batteries, and that these lithium batteries 
are forbidden for transport aboard passenger aircraft. PHMSA is 
proposing to allow the message that these batteries are forbidden for 
transport aboard passenger aircraft to be expressed through the current 
marking or by using a CARGO AIRCRAFT ONLY label as shown in Sec.  
172.448.
Section 171.25
    Section 171.24 details additional requirements for the use of the 
IMDG Code. In this NPRM, PHMSA is proposing to amend the marking 
requirement for packages containing primary lithium batteries and cells 
that meet the exceptions in Sec.  173.185(c) in paragraph (b)(3). 
Packages meeting these exceptions currently are required to be marked 
with an indication that they contain lithium batteries, and that these 
lithium batteries are forbidden for transport aboard passenger 
aircraft. PHMSA is proposing to allow the message that these batteries 
are forbidden for transport aboard passenger aircraft to be expressed 
through the current marking or by using a CARGO AIRCRAFT ONLY label as 
shown in Sec.  172.448.

Part 172

Section 172.101
    Section 172.101 provides instructions for using the Hazardous 
Materials Table (HMT) and the HMT itself. In this NPRM, PHMSA is 
proposing to revise the instructional text that precedes the HMT for 
paragraph (k) of this section.
    Paragraph (k) of Sec.  172.101 explains the purpose of column (10) 
of the HMT and prescribes the vessel stowage and segregation for 
specific entries in the HMT. Column (10) is divided into two columns: 
Column (10A) [Vessel stowage] specifies the authorized stowage 
locations on board cargo and passenger vessels and column (10B) [Other 
provisions] specifies special stowage and segregation provisions. PHMSA 
is proposing to amend this instructional text to note that the codes in 
column 10B address not only codes for stowage requirements, but also, 
in certain instances, handling requirements that need to be observed 
during loading of the hazardous materials. The IMO, in amendment 37-14 
of the IMDG Code, has split their stowage and segregation column (16) 
in the dangerous goods list into two columns and assigned codes to the 
existing stowage, handling, and segregation text. The new first column 
(16a) in the IMDG Code is entitled stowage and handling, and the second 
column (16b) is titled segregation. PHMSA is proposing to maintain the 
HMR's current column 10A and 10B system, with text in this section and 
Sec.  176.84 indicating that handling/loading of hazardous materials is 
also covered by certain codes in column 10B. See Section 176.84 other 
requirements for stowage, cargo handling, and segregation for cargo 
vessels and passenger vessels for a detailed discussion of proposed 
changes.
Hazardous Materials Table (HMT)
    In this NPRM, PHMSA is proposing to amend the HMT. Readers should 
review all changes for a complete understanding of the amendments. For 
purposes of the Government Printing Office's typesetting procedures, 
proposed changes to the HMT appear under three sections of the Table, 
``remove,'' ``add,'' and ``revise.'' Certain entries in the HMT, such 
as those with revisions to the proper shipping names, appear as a 
``remove'' and ``add.'' Proposed amendments to the HMT include the 
following:
New HMT Entries
UN3507 Uranium hexafluoride, radioactive material, excepted

[[Page 50750]]

package, less than 0.1 kg per package, non-fissile or fissile-excepted

    This new HMT entry addresses small quantities of uranium 
hexafluoride having corrosive properties by assigning the material to 
Class 8 with a subsidiary risk of Class 7 since this would be more 
consistent with the general rule of classification of radioactive 
material in limited quantities possessing other hazards per Sec.  
173.423. Shipments must comply with new special provision 369 and 
requirements found in Sec.  173.420(d).

UN3508 Capacitor, asymmetric with an energy storage capacity greater 
than 0.3Wh

    This new HMT entry is intended to cover asymmetric capacitors with 
an energy storage capacity greater than 0.3 Wh. Asymmetric capacitors 
are assigned as a Class 9 miscellaneous hazardous.

UN3510 Adsorbed gas, flammable, n.o.s.
UN3511 Adsorbed gas, n.o.s.
UN3512 Adsorbed gas, toxic, n.o.s.
UN3513 Adsorbed gas, oxidizing, n.o.s.
UN3514 Adsorbed gas, toxic, flammable, n.o.s.
UN3515 Adsorbed gas, toxic, oxidizing, n.o.s.
UN3516 Adsorbed gas, toxic, corrosive, n.o.s.
UN3517 Adsorbed gas, toxic, flammable, corrosive, n.o.s.
UN3518 Adsorbed gas, toxic, oxidizing, corrosive, n.o.s.
UN3519 Boron trifluoride, adsorbed
UN3520 Chlorine, adsorbed
UN3521 Silicon tetrafluoride, adsorbed
UN3522 Arsine, adsorbed
UN3523 Germane, adsorbed
UN3524 Phosphorus pentafluoride, adsorbed
UN3525 Phosphine, adsorbed
UN3526 Hydrogen selenide, adsorbed

    The ``Adsorbed gas'' HMT entries are added to address shipments of 
gas, which when packaged for transport, are adsorbed onto a solid 
porous material in a pressure receptacle. Entries classified as 
Division 2.3 gases are forbidden for transport by aircraft.
    Duplicate entries for UN0214 Trinitrobenzene, dry or wetted with 
less than 30 percent water, by mass currently exist in the HMT; while 
the UN1354 entry has been inadvertently overwritten by one of these 
UN0214 entries in an unidentified previous rulemaking. PHMSA is 
proposing to remove one of the duplicate UN0214 entries, and to 
reinsert the correct UN1354 entry.
    During the course of reviewing Column 10B (Vessel stowage Other 
codes) for harmonization with changes made in the 37-14 IMDG Code, 
PHMSA noticed that the entry for UN3231 Self-reactive liquid type B, 
temperature controlled is not currently listed in the HMR. This is 
believed to be the result of an inadvertent deletion in an unidentified 
rulemaking. PHMSA is proposing to reinstate the HMT entry for UN3231.
Amendments to the Column (1) Symbols
    Section 172.101(b) describes column (1) of the HMT and the 
associated symbols that may be indicated in the column. In accordance 
with Sec.  172.101(b), the symbol ``G'' identifies proper shipping 
names for which one or more technical names of the hazardous material 
must be entered in parentheses in association with the basic 
description on a shipping paper. The symbol ``I'' indicates these 
proper shipping names are appropriate for describing materials in 
international transportation, but that an alternate proper shipping 
name may be selected when only domestic transportation is involved.
    In this NPRM PHMSA is proposing to add international proper 
shipping names for ``Asbestos, amphibole (amosite, tremolite, 
actinolite, anthophyllite, crocidolite)'' and ``Asbestos, chrysotile'', 
and remove shipping descriptions for Blue, Brown, and White Asbestos. 
These new international proper shipping names for ``Asbestos, 
amphibole'' and ``Asbestos, chrysotile'' are proposed to have an ``I'' 
assigned in column one. PHMSA is also proposing to assign a ``G'' to 
the ``Asbestos, amphibole'' entry. The ``G'' indicates that the 
technical name(s) of the hazardous material must be entered in 
parentheses, in association with the basic description. In the case of 
this proposed proper shipping name, the technical name shown should be 
selected from the list of five different minerals (amosite, tremolite, 
actinolite, anthophyllite, crocidolite) indicated in italics after the 
proper shipping name. See the amendments to column (2) of the HMT for 
additional discussion regarding the revision of the proper shipping 
names for these entries.
Amendments to the Column (2) Hazardous Materials Descriptions and 
Proper Shipping Names
    Section 172.101(c) describes column (2) of the HMT and the 
requirements for hazardous materials descriptions and proper shipping 
names.
    The proper shipping name for ``UN0222, Ammonium nitrate, with more 
than 0.2 percent combustible substances, including any organic 
substance calculated as carbon, to the exclusion of any other added 
substance'' is amended by removing the italicized text and placing the 
text into the new special provision 370.
    The proper shipping name for ``UN1942, Ammonium nitrate, with not 
more than 0.2% combustible materials, including any organic substance, 
calculated as carbon to the exclusion of any other added substance'' is 
amended by replacing the word ``materials'' in italicized text with 
``substances'' and the comma following ``substance'' is placed after 
the word ``carbon.'' Due to the present placement of the comma in the 
description for the two ammonium nitrate entries, the 0.2% combustible 
materials/substances are measured differently. This amendment ensures 
that the 0.2% combustible level is calculated as carbon in the case of 
organic substances.
    Two new proper shipping names ``Asbestos, amphibole (amosite, 
tremolite, actinolite, anthophyllite, crocidolite)'' and ``Asbestos, 
chrysotile'' are proposed to be assigned to identification numbers 
UN2212 and UN2590, respectively. These new proper shipping names more 
appropriately describe the material than the present ``UN2212, Blue 
asbestos (Crocidolite) or Brown asbestos (amosite, mysorite)'' and 
``UN2590, White asbestos (chrysotile, actinolite, anthophyllite, 
tremolite).'' In the scientific community, Asbestos is divided into two 
chemical group names, ``Amphiboles'' and ``Chrysotile''. The amphibole 
group includes five different minerals (amosite, tremolite, actinolite, 
anthophyllite, crocidolite). The chrysotile group includes only the 
mineral chrysotile.
    The proper shipping name for ``UN3499, Capacitor, electric double 
layer (with an energy storage capacity greater than 0.3 Wh)'' is 
amended by placing the phrase ``electric double layer'' in Roman type. 
This amendment is necessary to differentiate this HMT entry from the 
new HMT entry, Capacitor, asymmetric.
    A new proper shipping name ``Safety devices, electrically 
initiated'' is proposed to be assigned to identification number UN3268. 
Current proper shipping names assigned to UN3268 are ``Air bag 
inflators, or Air bag modules, or Seat-belt pretensioners.'' The 
proposed proper shipping name more appropriately describes materials 
authorized under this HMT entry in conjunction with the proposed 
revision to special provision 160 to include a number of automotive 
industry life-saving appliances that are actuated by the electric 
signal of the crash sensor.

[[Page 50751]]

    A new proper shipping name ``Safety devices, pyrotechnic'' is 
proposed to be assigned to identification number UN0503. The current 
proper shipping names assigned to UN0503 are ``Air bag inflators, or 
Air bag modules, or Seat-belt pretensioners.'' The proposed proper 
shipping name more appropriately describes Class 1 materials authorized 
under this HMT entry.
    The proper shipping name for ``UN1082, Trifluorochloroethylene, 
stabilized'' is amended by adding ``Refrigerant gas R 1113'' as an 
alternative proper shipping name for consistency with the Dangerous 
Goods Lists of the various international standards and the HMT of the 
HMR. The proposed proper shipping name for UN1082 is

``Trifluorochloroethylene, stabilized or Refrigerant gas R 1113''
Amendments to Column (5) Packing Group
    Section 172.101(f) describes Column (5) of the HMT and the 
designation of the packing group(s) assigned to each proper shipping 
name.
    For the entries ``UN3316, Chemical kits'' and ``UN3316, First aid 
kits'' the Packing Groups II and III designations are proposed. The 
assignment of packing groups to these entries are not a new 
requirement; however, including packing group assignments in the HMT 
will ensure that shippers are aware that the most stringent packing 
group must be assigned to any individual substance in the kit in 
accordance 173.161(a)(2).
    The HMT entries for several articles are revised to remove packing 
group assignments. For articles, the packing group does not relate to 
the degree of hazard posed by the material but rather is assigned 
generically to the article. There is limited value in requiring an 
indication of the packing group in association with the shipment. 
Currently and without specific rationale, some articles are assigned 
packing groups while others are not. This proposed change provides a 
level of consistency for all articles specifically listed in the HMT. 
In this NPRM, PHMSA is proposing to remove packing group assignments 
from the following HMT entries:

------------------------------------------------------------------------
                  Proper shipping name                        UN No.
------------------------------------------------------------------------
Ammunition, tear-producing, non-explosive, without                UN2017
 burster or expelling charge, non-fuzed.................
Ammunition, toxic, non-explosive, without burster or              UN2016
 expelling charge, non-fuzed............................
Batteries, containing sodium............................          UN3292
Lithium ion batteries including lithium ion polymer               UN3480
 batteries..............................................
Lithium ion batteries contained in equipment including            UN3481
 lithium ion polymer batteries..........................
Lithium ion batteries packed with equipment including             UN3481
 lithium ion polymer batteries..........................
Lithium metal batteries including lithium alloy                   UN3090
 batteries..............................................
Lithium metal batteries contained in equipment including          UN3091
 lithium alloy batteries................................
Lithium metal batteries packed with equipment including           UN3091
 lithium alloy batteries................................
Mercury contained in manufactured articles..............          UN3506
Oxygen generator, chemical (including when contained in           UN3356
 associated equipment, e.g., passenger service units
 (PSUs), portable breathing equipment (PBE), etc).......
Safety devices, electrically initiated *................          UN3268
Tear gas candles........................................          UN1700
------------------------------------------------------------------------
* See amendments to Column 2.

Amendments to the Column (7) Special Provisions
    Section 172.101(h) describes Column (7) of the HMT and Sec.  
172.102(c) the special provisions assigned to specific entries in the 
HMT. The particular modifications to the entries in the HMT are 
discussed below. See Section 172.102 special provisions for a detailed 
discussion of the proposed additions, revisions, and deletions to the 
special provisions addressed in this NPRM.
    In this NPRM, special provision 134 is added to the HMT entry 
``UN3072, Life-saving appliances, not self-inflating containing 
dangerous goods as equipment.'' The addition of this special provision 
will clarify that equipment containing only lithium batteries must be 
consigned under the entries ``Lithium batteries contained in 
equipment'' or ``Lithium batteries packed with equipment,'' as 
appropriate.
    Several HMT entries are revised to include new special provision 
367. Special provision 367 authorizes the use of the ``Paint related 
material'' entries for consignments of packages containing ``Paint'' 
and ``Paint related material'' in the same package. This special 
provision also authorizes the proper shipping name ``Printing ink 
related material'' for consignments of packages containing ``Printing 
Ink'' and ``Printing ink related material'' in the same package.
    In this NPRM, new special provision 367 is proposed to be assigned 
to the following entries:

------------------------------------------------------------------------
                  Proper shipping name                        UN No.
------------------------------------------------------------------------
Paint including paint, lacquer, enamel, stain, shellac            UN1263
 solutions, varnish, polish, liquid filler, and liquid
 lacquer base...........................................
Paint or Paint related material.........................          UN3066
Paint, corrosive, flammable (including paint, lacquer,            UN3470
 enamel, stain, shellac solutions, varnish, polish,
 liquid filler, and liquid lacquer base)................
Paint, flammable, corrosive, (including paint, lacquer,           UN3469
 enamel, stain, shellac, varnish, polish, liquid filler
 and liquid lacquer base)...............................
Paint related material including paint thinning, drying,          UN1263
 removing, or reducing compound.........................
Paint related material corrosive, flammable (including            UN3470
 paint thinning or reducing compound)...................
Paint related material, flammable, corrosive (including           UN3469
 paint thinning or reducing compound)...................
Printing ink, flammable or Printing ink related material          UN1210
 (including printing ink thinning or reducing compound),
 flammable..............................................
------------------------------------------------------------------------

    In this NPRM, we propose to add new special provision 368 to the 
HMT entry ``UN2910, Radioactive material, excepted package-limited 
quantity of material.''

[[Page 50752]]

    In this NPRM, new special provision 369 is proposed to be assigned 
to the new HMT entry ``UN3507, Uranium hexafluoride, radioactive 
material, excepted package, less than 0.1 kg per package, non-fissile 
or fissile-excepted.''
    In this NPRM, new special provision 370 is proposed to be assigned 
to the HMT entry ``UN0222, Ammonium nitrate.'' This special provision 
contains qualifying language that previous to this NPRM, was part of 
the proper shipping name for UN0222.
    In this NPRM, new special provision 371 is proposed to be assigned 
to the HMT entry ``UN3164, Articles, pressurized pneumatic or hydraulic 
containing non-flammable gas.''
    In this NPRM, new special provision 375 is proposed to be assigned 
to the HMT entries ``UN3077, Environmentally hazardous substance, 
solid, n.o.s.'' and ``UN3077, Environmentally hazardous substance, 
liquid, n.o.s.''
    In this NPRM, for the HMT Packing Group III entry ``UN3089, Metal 
powders, flammable, n.o.s.'' special provision IB6 is replaced with IB8 
and special provisions IP2, and IP4 are added. IB8 is presently 
assigned to the Packing Group II entry, therefore, fiberboard, wooden 
and flexible IBCs are allowed for the Packing Group II materials, but 
are forbidden for the less dangerous Packing Group III substance. These 
proposed revisions will correct the inconsistency.
    In this NPRM, new special provision A61 is proposed to be assigned 
to the HMT entries ``UN 3107, Organic peroxide type E, liquid'' and 
``UN 3109, Organic peroxide type F, liquid''.
    Several HMT entries are revised to include new portable tank 
special provision TP47. Special provision TP47 indicates that the 2.5 
year internal portable tank examination may be waived or substituted by 
other test methods or inspection procedures specified by the competent 
authority or its authorized body, provided that the portable tank is 
dedicated to the transport of the organometallic substances to which 
this tank special provision is assigned. However, this examination is 
required when the conditions of Sec.  180.605(f) are met.
    In this NPRM, new special provision TP47 is proposed to be assigned 
to the following entries:

------------------------------------------------------------------------
                  Proper shipping name                        UN No.
------------------------------------------------------------------------
Organometallic substance, liquid, pyrophoric, water-              UN3394
 reactive...............................................
Organometallic substance, liquid, water-reactive........          UN3398
Organometallic substance, liquid, water-reactive,                 UN3399
 flammable..............................................
Organometallic substance, solid, pyrophoric, water-               UN3393
 reactive...............................................
Organometallic substance, solid, water-reactive.........          UN3395
Organometallic substance, solid, water-reactive,                  UN3396
 flammable..............................................
Organometallic substance, solid, water-reactive, self-            UN3397
 heating................................................
------------------------------------------------------------------------

    Amendments to the Column (9) Quantity Limitations.
    Section 172.101(j) describes Column (9) of the HMT and the quantity 
limitations for specific entries in the HMT. Furthermore, Columns (9A) 
and (9B) specify the maximum quantities that may be offered for 
transportation in one package by passenger-carrying aircraft or 
passenger-carrying rail car (Column (9A)) or by cargo-only aircraft 
(Column (9B)). The indication of ``forbidden'' means the material may 
not be offered for transportation or transported in the applicable mode 
of transport.
    For the entry ``UN3497, Krill meal'' quantity limits of 15 kg and 
50 kg for PG II, and 25 kg and 100 kg for PG III, are proposed for 
columns (9A) and (9B) respectively. Previously, there was no limit to 
the amount authorized to be shipped in one package. These new quantity 
limits are consistent with authorized quantity limits found in the ICAO 
TI.
    At the 24th meeting the ICAO DGP, it was agreed to incorporate 
certain UN numbers contained in the UN Model Regulations, but not 
currently listed in the ICAO TI. For the entry ``UN2216, Fish meal, 
stabilized or Fish scrap, stabilized,'' the panel determined that it 
should be forbidden for transport on both cargo and passenger aircraft. 
Under the HMR, this entry is assigned a ``W'' in Column (1) meaning 
that the material is only subject to the requirements when offered or 
intended for transport by vessel. Because of this discrepancy, in this 
NPRM, PHMSA is soliciting public comment on any potential action to 
align with the ICAO TI (including potentially adding ``A'' to column 
one and forbidding this entry aboard both cargo and passenger aircraft) 
and what potential benefit or burden a change to these quantity limits 
for UN2216 could potentially impose upon shippers and air operators.
    Amendments to the Column (10) vessel stowage requirements.
    Vessel stowage location (10B).
    Section 172.101(k) explains the purpose of column (10) of the HMT 
and prescribes the vessel stowage and segregation requirements for 
specific entries in the HMT. Column (10) is divided into two columns: 
Column (10A) [Vessel stowage] specifies the authorized stowage 
locations on board cargo and passenger vessels and column (10B) [Other 
provisions] specifies special stowage and segregation provisions.
    The IMO, in amendment 37-14 of the IMDG Code, split their stowage 
and segregation column (16) in the dangerous goods list into two 
columns and assigned codes to the existing stowage, handling, and 
segregation text. The new first column (16a) in the IMDG Code is titled 
stowage and handling, and the second column (16b) is titled 
segregation. PHMSA is proposing to maintain the HMT's current column 
10A and 10B, while also harmonizing our vessel stowage codes in columns 
10A and 10B as closely as possible with those in amendment 37-14 of the 
IMDG Code. There are several instances where PHMSA is proposing to 
maintain additional codes (see UN numbers 0019, 0020, 0021, 0301, 0303, 
1017, 1131, 1389, 1392, 1420, 1422, 1780, 1942, 1950, 2679, 2912, 3015, 
3071, 3101-3106, 3108-3110, 3242, 3323, and 3497) that vary from IMDG 
Code stowage and segregation requirements. These additional stowage and 
segregation provisions vary by UN number, but are considered additional 
precautions deemed necessary to ensure the safe transport of these 
commodities during transportation by vessel. PHMSA welcomes comments on 
the continued need and or the impact of maintaining this limited number 
of domestic variations from the international stowage, handling, and 
segregation requirements.
    During the preparation of this NPRM, PHMSA and the United States 
Coast Guard conducted an extensive review of all HMT entries to verify 
that domestic entries correspond as closely as possible with the 
provisions found in the IMDG Code. PHMSA is proposing numerous changes 
to the codes found in the HMT's column 10B [Other provisions] as a 
result of this review. The majority

[[Page 50753]]

of the changes are a result of work done at the IMO to eliminate 
duplicate and unnecessary provisions. Some of the proposed changes to 
column 10B are proposed to harmonize existing differences in stowage, 
handling, and segregation provisions between the HMR and the IMDG Code. 
Recognizing that there are both shippers and carriers that only offer 
hazardous materials by vessel domestically, PHMSA seeks comments on the 
costs and benefits to these domestic shippers and carriers of 
harmonizing the stowage provisions of the HMR with the provisions of 
the IMDG Code as proposed in this NPRM. PHMSA also solicits comments on 
the costs and benefits were we to maintain domestic stowage differences 
within the HMR. A table of proposed changes, listed in alphabetical 
order, showing the proper shipping name, UN identification number, any 
stowage codes proposed for removal, and any stowage codes proposed for 
addition is provided below. If a column is blank, no changes are 
proposed. The meaning of the codes in column 10B can be found either in 
Sec.  176.84 or are listed in the Sec.  176.84 Section-by-Section 
change portion of this NPRM.

----------------------------------------------------------------------------------------------------------------
                                                                  Proposed          Proposed
              Proper shipping name                UN ID No.       removals          additions
------------------------------------------------------------------------------------------------
Aircraft hydraulic power unit fuel tank........       UN3165  ................   21, 40, 49, 100
Acrylamide, solid..............................       UN2074  ................                25
Acrylamide solution............................       UN3426  ................                25
Aldol..........................................       UN2839  ................                25
Alkali metal alloys, liquid, n.o.s.............       UN1421  ................           13, 148
Alkali metal amalgam, liquid...................       UN1389  ................           13, 148
Alkali metal amalgam, solid....................       UN3401  ................           13, 148
Alkali metal amides............................       UN1390  ................           13, 148
Alkali metal dispersions, flammable or Alkaline       UN3482  ................           13, 148
 earth metal dispersions, flammable............
Alkali metal dispersions, or Alkaline earth           UN1391  ................           13, 148
 metal dispersions.............................
Alkaline earth metal alloys, n.o.s.............       UN1393  ................           13, 148
Alkaline earth metal amalgams, liquid..........       UN1392  ................           13, 148
Alkaline earth metal amalgams, solid...........       UN3402  ................           13, 148
Allyl chloroformate............................       UN1722  ................           21, 100
Aluminum borohydride or Aluminum borohydride in       UN2870  ................           13, 148
 devices.......................................
Aluminum carbide...............................       UN1394  ................           13, 148
Aluminum ferrosilicon powder (PG II and III)...       UN1395  ................           13, 148
Aluminum hydride...............................       UN2463  ................           13, 148
Aluminum phosphide.............................       UN1397  ................           13, 148
Aluminum powder, coated (PG II and III)........       UN1309  ................      13, 147, 148
Aluminum powder, uncoated (PG II and III)......       UN1396  ................           13, 148
Aluminum silicon powder, uncoated..............       UN1398  ................           13, 148
Aluminum smelting by-products or Aluminum             UN3170  ................           13, 148
 remelting by-products (PG II and III).........
N-Aminoethylpiperazine.........................       UN2815  ................                25
Aminopyridines (o-; m-; p-)....................       UN2671  ................                25
Ammonium nitrate based fertilizer..............       UN2067  ................               124
Ammonium nitrate, liquid.......................       UN2426  ................               124
Ammonium nitrate...............................       UN1942  ................           66, 124
Ammonium polysulfide, solution (PG II and III).       UN2818  ................                25
Ammonium sulfide solution......................       UN2683  ................                25
Anisoyl chloride...............................       UN1729  ................                40
Antimony pentafluoride.........................       UN1732  ................                40
Arsenic bromide................................       UN1555  ................                25
Barium.........................................       UN1400  ................           13, 148
Barium alloys, pyrophoric......................       UN1854  ................           13, 148
Barium azide, wetted...........................       UN1571  ................                36
Barium peroxide................................       UN1449                56           66, 148
Batteries, containing sodium...................       UN3292  ................           13, 148
Beryllium, powder..............................       UN1567  ................      13, 147, 148
Boron tribromide...............................       UN2692  ................                25
Boron trifluoride dehydrate....................       UN2851  ................                25
Boron trifluoride dimethyl etherate............       UN2965  ................                25
Bromoform......................................  ...........  ................                25
Bromine........................................       UN1744  ................                25
Bromine solutions (both PG I entries)..........       UN1744  ................                25
Bromobenzyl cyanides, liquid...................       UN1694  ................                25
Bromobenzyl cyanides, solid....................       UN3449  ................                25
tert-Butyl hypochlorite........................       UN3255  ................                40
Butyl mercaptan................................       UN2347  ................               102
5-tert-Butyl-2,4,6-trinitro-m-xylene or Musk          UN2956  ................                40
 xylene........................................
Butyric acid...................................       UN2820  ................                25
Calcium........................................       UN1401  ................           13, 148
Calcium carbide (PG I and II)..................       UN1402  ................           13, 148
Calcium cyanamide with more than 0.1 percent of       UN1403  ................           13, 148
 calcium carbide...............................
Calcium hydride................................       UN1404  ................           13, 148
Calcium manganese silicon......................       UN2844  ................           13, 148
Calcium peroxide...............................       UN1457                56           66, 148
Calcium phosphide..............................       UN1360  ................           13, 148
Calcium, pyrophoric or Calcium alloys,                UN1855  ................           13, 148
 pyrophoric....................................
Calcium silicide (PG II and III)...............       UN1405  ................           13, 148

[[Page 50754]]

 
Carbon, activated..............................       UN1362  ................                25
Carbon (PG II and III).........................       UN1361  ................                25
Castor beans or Castor meal or Castor pomace or       UN2969  ................           44, 122
 Castor flake..................................
Cerium, slabs, ingots, or rods.................       UN1333  ................      13, 147, 148
Cerium, turnings or gritty powder..............       UN3078  ................           13, 148
Cesium or Caesium..............................       UN1407  ................           13, 148
Chloroacetonitrile.............................       UN2668  ................                25
Chloroacetophenone, liquid, (CN)...............       UN3416  ................                25
Chloroacetophenone, solid, (CN)................       UN1697  ................                25
Chlorocresols solution (PG II and III).........       UN3437  ................                25
Chloromethyl chloroformate.....................       UN2745           21, 100                12
Chloronitrobenzenes, liquid....................       UN3409  ................  44, 89, 100, 141
Chlorosilanes, water-reactive, flammable,             UN2988  ................      13, 147, 148
 corrosive, n.o.s..............................
Corrosive liquids, water-reactive, n.o.s. (PG I       UN3094  ................           13, 148
 and II).......................................
Corrosive solids, toxic, n.o.s. (PG III).......       UN2923                95  ................
Corrosive solids, water-reactive, n.o.s. (PG I,       UN3096  ................           13, 148
 II, and III)..................................
Crotonic acid, liquid..........................       UN3472  ................                25
Crotonic acid, solid...........................       UN2823  ................                25
Cyanogen bromide...............................       UN1889  ................                52
Cyanuric chloride..............................       UN2670  ................                25
Cyclohexyl mercaptan...........................       UN3054  ................               102
1,1-Dichloro-1-nitroethane.....................       UN2650  ................                25
1,3-Dichloroacetone............................       UN2649  ................                25
1,3-Dichloropropanol-2.........................       UN2750  ................                25
Diethylthiophosphoryl chloride.................       UN2751  ................                25
Dipicryl sulfide, wetted.......................       UN2852  ................                36
2-Ethylhexyl chloroformate.....................       UN2748           21, 100  ................
Ferrocerium....................................       UN1323  ................      13, 147, 148
Ferrosilicon with 30 percent or more but less         UN1408  ................           13, 148
 than 90 percent silicon.......................
Ferrous metal borings or Ferrous metal shavings       UN2793  ................           13, 148
 or Ferrous metal turnings or Ferrous metal
 cuttings in a form liable to self-heating.....
Fuel cell cartridges or Fuel cell cartridges          UN3476  ................           13, 148
 contained in equipment or Fuel cell cartridges
 packed with equipment, containing water-
 reactive substances...........................
Hafnium powder, dry (PG I, II, and III)........       UN2545  ................           13, 148
Hexachlorocyclopentadiene......................       UN2646  ................                25
Hexamethylenediamine, solid....................       UN2280  ................                25
Hydrofluoric acid, with more than 60 percent          UN1790  ................                25
 strength......................................
Hydrofluoric acid, with not more than 60              UN1790  ................                25
 percent strength..............................
Hydrogen, refrigerated liquid (cryogenic              UN1966  ................                57
 liquid).......................................
Hypochlorites, inorganic, n.o.s................       UN3212               106  ................
Iron oxide, spent, or Iron sponge, spent              UN1376  ................           13, 148
 obtained from coal gas purification...........
Isopropyl chloroformate........................       UN2407  ................           21, 100
Life-saving appliances, not self inflating.....       UN3072  ................               122
Life-saving appliances.........................       UN2990  ................               122
Lithium........................................       UN1415  ................           13, 148
Lithium aluminum hydride.......................       UN1410  ................           13, 148
Lithium aluminum hydride, ethereal.............       UN1411  ................           13, 148
Lithium borohydride............................       UN1413  ................           13, 148
Lithium ferrosilicon...........................       UN2830  ................           13, 148
Lithium hydride................................       UN1414  ................           13, 148
Lithium hydride, fused solid...................       UN2805  ................           13, 148
Lithium peroxide...............................       UN1472  ................           13, 148
Lithium silicon................................       UN1417  ................           13, 148
Magnesium aluminum phosphide...................       UN1419  ................           13, 148
Magnesium diamide..............................       UN2004  ................           13, 148
Magnesium granules, coated, particle size not         UN2950  ................           13, 148
 less than 149 microns.........................
Magnesium hydride..............................       UN2010  ................           13, 148
Magnesium or Magnesium alloys with more than 50       UN1869  ................      13, 147, 148
 percent magnesium in pellets, turnings or
 ribbons.......................................
Magnesium peroxide.............................       UN1476  ................           13, 148
Magnesium phosphide............................       UN2011  ................           13, 148
Magnesium, powder or Magnesium alloys, powder         UN1418  ................           13, 148
 (PG I, II, and III)...........................
Magnesium silicide.............................       UN2624  ................           13, 148
Maleic anhydride...............................       UN2215  ................           95, 102
Maleic anhydride, molten.......................       UN2215  ................           95, 102
Malononitrile..................................       UN2647  ................                25
Maneb or Maneb preparations with not less than        UN2210  ................           13. 148
 60 percent maneb..............................
Maneb stabilized or Maneb preparations,               UN2968  ................           13, 148
 stabilized against self-heating...............
Metal powders, flammable, n.o.s. (PG II and           UN3089  ................                74
 III)..........................................
Mercaptans, liquid, flammable, n.o.s. or              UN3336  ................               102
 Mercaptan mixture, liquid, flammable, n.o.s.
 (PG I, II, and III)...........................
Mercaptans, liquid, flammable, toxic, n.o.s. or       UN1228  ................               102
 Mercaptan mixtures, liquid, flammable, toxic,
 n.o.s. (PG II and III)........................

[[Page 50755]]

 
Mercaptans, liquid, toxic, flammable, n.o.s. or       UN3071  ................               102
 Mercaptan mixtures, liquid, toxic, flammable,
 n.o.s., flash point not less than 23 degrees C
Metal catalyst, dry (PG I, II, and III)........       UN2881  ................      13, 147, 148
Metal hydrides, water reactive, n.o.s. (PG I          UN1409  ................           13, 148
 and II).......................................
Metal powder, self-heating, n.o.s. (PG II and         UN3189  ................      13, 147, 148
 III)..........................................
Metal powders, flammable, n.o.s. (PG II and           UN3089  ................  13, 74, 147, 148
 III)..........................................
Metallic substance, water-reactive, n.o.s. (PG        UN3208  ................           13, 148
 I, II, and III)...............................
Metallic substance, water-reactive, self-             UN3209  ................           13, 148
 heating, n.o.s. (PG I, II, and III)...........
Methyl iodide..................................       UN2644  ................                25
Methyl magnesium bromide, in ethyl ether.......       UN1928  ................           13, 148
Methyl vinyl ketone, stabilized................  ...........  ................           21, 100
Organic peroxide type B, liquid................       UN3101                40                25
Organic peroxide type B, liquid, temperature          UN3111                40                25
 controlled....................................
Organic peroxide type B, solid.................       UN3102                40                25
Organic peroxide type B, solid, temperature           UN3112                40                25
 controlled....................................
Organic peroxide type C, liquid................       UN3103                40                25
Organic peroxide type C, liquid, temperature          UN3113                40                25
 controlled....................................
Organic peroxide type C, solid.................       UN3104                40                25
Organic peroxide type C, solid, temperature           UN3114                40                25
 controlled....................................
Organic peroxide type D, liquid................       UN3105                40                25
Organic peroxide type D, liquid, temperature          UN3115                40                25
 controlled....................................
Organic peroxide type D, solid.................       UN3106                40                25
Organic peroxide type D, solid, temperature           UN3116                40                25
 controlled....................................
Organic peroxide type E, liquid................       UN3107                40                25
Organic peroxide type E, liquid, temperature          UN3117                40                25
 controlled....................................
Organic peroxide type E, solid.................       UN3108                40                25
Organic peroxide type E, solid, temperature           UN3118                40                25
 controlled....................................
Organic peroxide type F, liquid................       UN3109                40                25
Organic peroxide type F, liquid, temperature          UN3119                40                25
 controlled....................................
Organic peroxide type F, solid.................       UN3110                40                25
Organic peroxide type F, solid, temperature           UN3120                40                25
 controlled....................................
Organometallic substance, liquid, pyrophoric...       UN3392  ................           13, 148
Organometallic substance, liquid, pyrophoric,         UN3394  ................       13, 52, 148
 water-reactive................................
Organometallic substance, liquid, water-              UN3398  ................           13, 148
 reactive (PG I, II, and III)..................
Organometallic substance, liquid, water-              UN3399  ................           13, 148
 reactive, flammable (PG I, II, and III).......
Organometallic substance, solid, pyrophoric,          UN3393  ................           13, 148
 water-reactive................................
Organometallic substance, solid, water-reactive       UN3395  ................           13, 148
 (PG I, II, and III)...........................
Organometallic substance, solid, water-               UN3396  ................           13, 148
 reactive, flammable (PG I, II, and III).......
Organometallic substance, solid, water-               UN3397  ................           13, 148
 reactive, self-heating (PG I, II, and III)....
Oxidizing liquid, corrosive, n.o.s. (PG I).....       UN3098               106  ................
Oxidizing liquid, corrosive, n.o.s. (PG II and        UN3098           106, 34  ................
 III)..........................................
Oxidizing liquid, n.o.s. (PG I, II, and III)...       UN3139               106  ................
Oxidizing liquid, toxic, n.o.s. (PG I, II, and        UN3099               106  ................
 III)..........................................
Oxidizing solid, corrosive, n.o.s. (PG I, II,         UN3085               106  ................
 and III)......................................
Oxidizing solid, flammable, n.o.s..............       UN3137  ................      13, 147, 148
Oxidizing solid, toxic, n.o.s. (PG I)..........       UN3087               106  ................
Oxidizing solid, toxic, n.o.s. (PG II and III).       UN3087           95, 106  ................
Oxidizing solid, water reactive, n.o.s.........       UN3121  ................           13, 148
Pentaborane....................................       UN1380  ................           13, 148
Peroxides, inorganic, n.o.s. (PG II and III)...       UN1483  ................               148
Persulfates, inorganic, aqueous solution, n.o.s       UN3216  ................                58
Pesticides, liquid, flammable, toxic, flash           UN3021  ................                40
 point less than 23 degrees C (PG I and II)....
Phenyl chloroformate...........................       UN2746            21, 10  ................
Phosphorus heptasulfide, free from yellow or          UN1340  ................      13, 147, 148
 white phosphorus..............................
Phosphorus oxybromide..........................       UN1939  ................                25
Phosphorus pentabromide........................       UN2691  ................                25
Phosphorus trioxide............................       UN2578  ................                25
Phosphorus trisulfide, free from yellow or            UN1343  ................      13, 147, 148
 white phosphorus..............................
Piperazine.....................................       UN2579  ................                25
Potassium......................................       UN2257  ................           13, 148
Potassium borohydride..........................       UN1870  ................           13, 148
Potassium, metal alloys, liquid................       UN1420  ................           13, 148
Potassium, metal alloys, solid.................       UN3403  ................           13, 148
Potassium, metal alloys, solid.................       UN3403  ................       13, 52, 148
Potassium peroxide.............................       UN1491  ................               148
Potassium phosphide............................       UN2012  ................           13, 148
Potassium sodium alloys, liquid................       UN1422  ................           13, 148
Potassium sodium alloys, solid.................       UN3404  ................           13, 148
Potassium superoxide...........................       UN2466  ................           13, 148
Pyrophoric liquid, inorganic, n.o.s............       UN3194  ................           13, 148
Pyrophoric liquids, organic, n.o.s.............       UN2845  ................           13, 148
Pyrophoric metals, n.o.s., or Pyrophoric              UN1383  ................           13, 148
 alloys, n.o.s.................................
Pyrophoric solid, inorganic, n.o.s.............       UN3200  ................           13, 148

[[Page 50756]]

 
Pyrophoric solids, organic, n.o.s..............       UN2846  ................           13, 148
Quinoline......................................       UN2656  ................                25
Rubidium.......................................       UN1423  ................           13, 148
Seed cake with not more than 1.5 percent oil          UN2217  ................               120
 and not more than 11 percent moisture.........
Self-reactive liquid type B....................       UN3221  ................           25, 127
Self-reactive liquid type C....................       UN3223  ................                25
Self-reactive liquid type C, temperature              UN3233  ................                25
 controlled....................................
Self-reactive liquid type D....................       UN3225  ................                25
Self-reactive liquid type D, temperature              UN3235  ................                25
 controlled....................................
Self-reactive liquid type E....................       UN3227  ................                25
Self-reactive liquid type E, temperature              UN3237  ................                25
 controlled....................................
Self-reactive liquid type F....................       UN3229  ................                25
Self-reactive liquid type F, temperature              UN3239  ................                25
 controlled....................................
Self-reactive solid type B.....................       UN3222  ................           25, 127
Self-reactive solid type B, temperature               UN3232  ................                25
 controlled....................................
Self-reactive solid type C.....................       UN3224  ................                25
Self-reactive solid type C, temperature               UN3234  ................                25
 controlled....................................
Self-reactive solid type D.....................       UN3226  ................                25
Self-reactive solid type D, temperature               UN3236  ................                25
 controlled....................................
Self-reactive solid type E.....................       UN3228  ................                25
Self-reactive solid type E, temperature               UN3238  ................                25
 controlled....................................
Self-reactive solid type F.....................       UN3230  ................                25
Self-reactive solid type F, temperature               UN3240  ................                25
 controlled....................................
Sodium.........................................       UN1428  ................           13, 148
Sodium aluminum hydride........................       UN2835  ................           13, 148
Sodium borohydride.............................       UN1426  ................           13, 148
Sodium dinitro-o-cresolate, wetted.............       UN3369  ................                28
Sodium hydride.................................       UN1427  ................           13, 148
Sodium peroxide................................       UN1504  ................           13, 148
Sodium phosphide...............................       UN1432  ................           13, 148
Stannic phosphide..............................       UN1433  ................           13, 148
Strontium peroxide.............................       UN1509  ................           13, 148
Strontium phosphide............................       UN2013  ................           13, 148
Titanium powder, dry (PG I, II, and III).......       UN2546  ................           13, 148
Titanium sponge granules or Titanium sponge           UN2878  ................      13, 147, 148
 powders.......................................
Titanium trichloride, pyrophoric or Titanium          UN2441  ................           13, 148
 trichloride mixtures, pyrophoric..............
Toxic by inhalation liquid, water-reactive,           UN3385  ................           13, 148
 n.o.s. with an LC50 lower than or equal to 200
 ml/m\3\ and saturated vapor concentration
 greater than or equal to 500 LC50.............
Toxic by inhalation liquid, water-reactive,           UN3386  ................           13, 148
 n.o.s. with an LC50 lower than or equal to
 1,000 ml/m\3\ and saturated vapor
 concentration greater than or equal to 10 LC50
Toxic by inhalation liquid, water-reactive,           UN3490  ................           13, 148
 flammable, n.o.s. with an LC50 lower than or
 equal to 200 ml/m3 and saturated vapor
 concentration greater than or equal to 500
 LC50..........................................
Toxic by inhalation liquid, water-reactive,           UN3491  ................           13, 148
 flammable, n.o.s. with an LC50 lower or equal
 to 1000 ml/m3 and saturated vapor
 concentration greater than or equal to 10 LC50
Toxic liquid, corrosive, inorganic, n.o.s. (PG        UN3289  ................                40
 I and II).....................................
Toxic liquid, inorganic, n.o.s. (PG I, II, and        UN3287  ................                40
 III)..........................................
Toxic liquids, water-reactive, n.o.s. (PG I and       UN3123  ................           13, 148
 II)...........................................
Toxic solid, corrosive, inorganic, n.o.s. (PG I       UN3290  ................                40
 and II).......................................
Toxic solid, inorganic, n.o.s. (PG I, II, and         UN3288  ................                40
 III)..........................................
Toxic solids, water-reactive, n.o.s. (PG I and        UN3125  ................           13, 148
 II)...........................................
Trifluoroacetic acid...........................       UN2699  ................                25
Trimethylacetyl chloride.......................       UN2438  ................           21, 100
Trinitrobenzene, wetted, with not less than 10%       UN3367  ................                28
 water, by mass................................
Trinitrobenzoic acid, wetted with not less than       UN3368  ................                28
 10% water by mass.............................
Trinitrobenzoic acid, wetted with not less than       UN1355  ................                28
 30 percent water, by mass.....................
Trinitrochlorobenzene (picryl chloride),              UN3365  ................                28
 wetted, with not less than 10% water by mass..
Trinitrophenol (picric acid), wetted, with not        UN3364  ................                28
 less than 10 percent water by mass............
Trinitrotoluene (TNT), wetted, with not less          UN3366  ................                28
 than 10 percent water by mass.................
Urea nitrate, wetted, with not less than 10           UN3370  ................                28
 percent water by mass.........................
Vinylpyridines, stabilized.....................       UN3073  ................               100
Water-reactive liquid, corrosive, n.o.s. (PG I,       UN3129  ................           13, 148
 II, and III)..................................
Water-reactive liquid, n.o.s. (PG I, II, and          UN3148  ................           13, 148
 III)..........................................
Water-reactive liquid, toxic, n.o.s. (PG I, II,       UN3130  ................           13, 148
 and III)......................................
Water-reactive solid, corrosive, n.o.s. (PG I,        UN3131  ................           13, 148
 II, and III)..................................
Water-reactive solid, flammable, n.o.s. (PG I,        UN3132  ................           13, 148
 II, and III)..................................
Water-reactive solid, n.o.s. (PG I, II, and           UN2813  ................           13, 148
 III)..........................................
Water-reactive, solid, oxidizing, n.o.s. (PG II       UN3133  ................           13, 148
 and III)......................................
Water-reactive solid, self-heating, n.o.s. (PG        UN3135  ................           13, 148
 I, II, and III)...............................
Water-reactive solid, toxic, n.o.s. (PG I, II,        UN3134  ................           13, 148
 and III)......................................
Zinc ashes.....................................       UN1435  ................           13, 148
Zinc dithionite or Zinc hydrosulfite...........       UN1931                49       13, 26, 123
Zinc peroxide..................................       UN1516  ................           13, 148

[[Page 50757]]

 
Zinc phosphide.................................       UN1714  ................           13, 148
Zinc powder or Zinc dust (PG I, II, and III)...       UN1436  ................           13, 148
Zirconium, dry, coiled wire, finished metal           UN2858  ................      13, 147, 148
 sheets, strip (thinner than 254 microns but
 not thinner than 18 microns)..................
Zirconium, dry, finished sheets, strip or             UN2009  ................           13, 148
 coiled wire...................................
Zirconium powder, dry (PG I, II, and III)......       UN2008  ................           13, 148
Zirconium powder, wetted with not less than 25        UN1358  ................      13, 147, 148
 percent water (a visible excess of water must
 be present) (a) mechanically produced,
 particle size less than 53 microns; (b)
 chemically produced, particle size less than
 840 microns...................................
Zirconium scrap................................       UN1932  ................           13, 148
----------------------------------------------------------------------------------------------------------------

Appendix B to Sec.  172.101
    Appendix B to Sec.  172.101 lists Marine Pollutants regulated under 
the HMR. In this NPRM, PHMSA is proposing to revise the List of Marine 
Pollutants by adding sixty-two new entries consistent with the IMDG 
Code. These changes are proposed to include those substances that, by 
virtue of meeting the Group of Experts on the Scientific Aspects of 
Marine Environmental Protection (GESAMP) defining criteria for marine 
pollutants, were either assigned a ``P'' in the dangerous goods list or 
identified in the alphabetical index to amendment 37-14 of the IMDG 
Code. The entry ``Chlorotoluenes (meta-;para-)'' would be removed based 
on its removal from the IMDG Code.
Section 172.102 Special Provisions
    Section 172.102 lists special provisions applicable to the 
transportation of specific hazardous materials. Special provisions 
contain packaging requirements, prohibitions, and exceptions applicable 
to particular quantities or forms of hazardous materials. PHMSA is 
proposing the following revisions to Sec.  172.102, special provisions:
Special Provision 28
    Special provision 28 states that the dihydrated sodium salt of 
dichloroisocyanuric acid is not subject to the HMR. In this NPRM, PHMSA 
proposes to revise special provision 28 to convey that the dihydrated 
sodium salt of dichloroisocyanuric acid does not meet the definition of 
a Division 5.1 (oxidizer) and is not subject to the requirements of the 
subchapter unless it meets the criteria for inclusion in another Class 
or Division, such as Class 9, environmentally hazardous substance. Some 
formulations of the dihydrated sodium salt of dichloroisocyanuric acid 
meet the criteria for classification as an environmentally hazardous 
substance.
Special Provision 52
    Special provision 52 authorizes use of the HMT entry ``UN2067, 
Ammonium nitrate based fertilizer'' for substances that do not exhibit 
explosive properties of Class 1 when tested in accordance with Test 
Series 1 and 2 of the UN Manual of Tests and Criteria, Part I. In this 
NPRM, PHMSA proposes to revise special provision 52 by removing the 
requirement to test in accordance with Test Series 1 because Test 
Series 2 determines whether such properties are indeed those of Class 
1, not Test Series 1.
Special Provision 147
    This special provision describes the composition of the material 
for which the use of the HMT entry ``UN3375, Ammonium nitrate emulsion 
or Ammonium nitrate suspension or Ammonium nitrate gel, intermediate 
for blasting explosives'' is authorized and prohibits the material from 
being classified and transported unless approved by the Associate 
Administrator. Special provision 147 requires that these substances 
must satisfactorily pass Test Series 8 of the UN Manual of Tests and 
Criteria, Part I, Section 18. Test Series 8 contains four test types. 
Tests 8(a), (b) and (c) are used for classification purposes while Test 
8(d) is used to assess suitability for transport in portable tanks. The 
use of this entry (UN 3375) therefore requires only that Tests 8(a), 
(b) and (c) are satisfactorily passed. In this NPRM, PHMSA is proposing 
to revise special provision 147 by clarifying that Tests 8(a), (b) and 
(c), not the entire Test Series 8, are required for use in 
classification and subsequent approval by the Associate Administrator.
Special Provision 160
    Special provision 160 is presently assigned to ``UN3268, Air bag 
inflators, or Air bag modules, or Seat-belt pretensioners'' in Class 9. 
Special provision 160 includes the requirement that air bag inflators 
and modules must be tested in accordance with Test series 6 (c) of Part 
I of the UN Manual of Tests and Criteria. In this NPRM, PHMSA is 
proposing to revise special provision 160 in conjunction with revising 
the proper shipping name for UN3268 to ``Safety devices, electrically 
initiated.'' The entry is revised to clarify that it applies to safety 
devices used in vehicles including vessels and aircraft, and 
pyromechanical devices that are added to the list of authorized 
devices. The development of safety products has seen significant 
progress since the introduction of UN3268 and the range of current 
products extends beyond what can presently be assigned to UN3268. Some 
of the newer safety products include elements that are actuated by the 
electrical signal of the crash sensor (e.g. pyromechanical devices). 
Examples include: Devices that interrupt the electrical connection in 
case of emergency by disconnecting the main power cable in the vehicle 
from the battery to prevent short circuit and consequentially minimize 
the risk of fire in the vehicle; and actuators which are used for 
active headrests or for pedestrian protection to release special hinges 
of the engine hood. In addition, PHMSA is proposing to clarify that 
this entry does not apply to life saving appliances described in Sec.  
173.219 (UN Nos. 2990 and 3072).
Special Provision 161
    Special provision 161 required that for domestic transportation the 
alternate shipping description ``Articles, pyrotechnic for technical 
purposes'' be used to describe air bag inflators, air bag modules and 
seat-belt pretensioners (UN0503) meeting the criteria for a Division 
1.4G explosive. This was done to ensure a different shipping name was 
used to describe these articles to differentiate them from air bag 
inflators, air bag modules and seat-belt pretensioners (UN3268) in 
Class 9. In this NPRM, PHMSA proposes, consistent with the UN Model 
Regulations, to adopt new proper shipping names for these items, 
``Safety devices'' (UN3268) for these articles

[[Page 50758]]

assigned to Class 9, and ``Safety Devices, pyrotechnic'' (UN0503) for 
these articles assigned to Division 1.4G. Since the proper shipping 
names for these items would no longer the same, there would be no need 
to use a different proper shipping name for these articles assigned to 
Division 1.4G. Therefore the need for this special provision would be 
obsolete and we propose to delete it from the regulations and to delete 
its reference from the UN0503 entry in the HMT. Under this proposed 
revision, for domestic transportation, air bag inflators, air bag 
modules and seat-belt pretensioners (UN0503) meeting the criteria for a 
Division 1.4G explosive, that are currently described as ``Articles, 
pyrotechnic for technical purposes'' would be described as ``Safety 
devices, pyrotechnic'' (UN0503).
Special Provision 238
    Special provision 238 addresses the shipment of neutron radiation 
detectors. In this NPRM, PHMSA proposes to revise special provision 238 
to align with the UN Model Regulations special provision 373 by 
expanding the transport conditions for neutron radiation detectors and 
radiation detection systems containing such detectors. Paragraph a. is 
restructured into: (a)(1), General transport requirements; (a)(2), 
requirements for radiation detectors transported as individual 
components; and (a)(3), requirements for completed neutron radiation 
detection systems containing detectors. Consistent with the UN Model 
Regulations, PHMSA is proposing the following revisions to the 
transport conditions: [1] In (a)(1), increase the total amount of gas 
authorized per detector from 12.8 grams to 13 grams; clarify that the 
minimum burst pressure is demonstrated by design type qualification 
testing; and add a new leaktightness standard; [2] in (a)(2), clarify 
that in addition to being packed in a strong outer package, that the 
completed package must be capable of withstanding a drop of 1.8 meters 
(6-foot) without leakage of gas contents; and increase the total amount 
of gas from all detectors per outer packaging from 51.2 grams to 52 
grams; and [3], in (a)(3), add a new requirement that for completed 
neutron radiation detection systems, the detectors must be contained in 
a strong sealed outer casing; and add a new requirement that the 
completed system must be capable of withstanding a 1.8 meter (6-foot) 
drop test without leakage unless a system's outer casing affords 
equivalent protection.
Special Provision 342
    This special provision, assigned to ``UN1040, Ethylene oxide or 
Ethylene oxide with nitrogen'' allows sterilization devices containing 
ethylene oxide, conforming to the conditions in the special provision, 
and packaged in accordance with Sec.  173.4a of the HMR to be offered 
for transportation and transported by all modes even though Column (9A) 
of the Sec.  172.101 HMT lists the material as forbidden by passenger 
aircraft.
    Consistent with the ICAO TI, in this NPRM, PHMSA is proposing to 
further clarify that irrespective of both Columns (9A) and (9B) of the 
Sec.  172.101 HMT listing the material as forbidden, ethylene oxide 
conforming to the conditions in the special provision is eligible for 
air transport. Specifically, we are proposing to supplement the 
language in this special provision ``irrespective of the restriction of 
Sec.  173.4a(b)'' with ``and the indication of ``forbidden'' in columns 
(9A) and (9B) of the Sec.  172.101 table.''
Special Provision 362
    Special provision 362 specifies when a material can be considered a 
chemical under pressure. Specifically, the special provision states 
that classification of these materials is to be based on hazard 
characteristics of the components in the propellant, the liquid, or the 
solid forms. In this NPRM, PHMSA proposes to revise special provision 
362 by adding a new paragraph (f) to clarify that chemicals under 
pressure containing components forbidden for transport on both 
passenger and cargo aircraft must not be transported by air.
Special Provision 367
    A new special provision 367 is proposed to clarify that the proper 
shipping name ``Paint related material'' or ``Printing ink related 
material'' may be used for consignments of packages containing both 
``Paint'' and ``Paint related material'' or ``Printing Ink'' and 
``Printing ink related material'' in the same package and sharing the 
same identification number (UN 1210, UN 1263, UN 3066, UN 3469, or UN 
3470). For example, ``UN1263, Paint including paint, lacquer, enamel, 
stain, shellac solutions, varnish, polish, liquid filler, and liquid 
lacquer base'' and ``UN1263, Paint related material'' contained in the 
same package, may be consigned under the entry ``UN1263, Paint related 
material including paint thinning, drying, removing, or reducing 
compound.'' Paint mainly consists of resin, pigment and solvent. 
Thinning compound consists of solvent as well. Thus under the same UN 
entry, there is no difference between ``Paint'' and ``Paint related 
material'' with regard to transport requirements.
Special Provision 368
    In this NPRM, PHMSA proposes adding new special provision 368 and 
assigning it to ``UN2910, Radioactive material, excepted package-
limited quantity of material'' to clarify that in the case of non-
fissile or fissile-excepted uranium hexafluoride, the material must be 
classified under UN3507 or UN2978.''
Special Provision 369
    The 18th Revised Edition of the UN Model Regulations has adopted a 
new proper shipping name of ``UN3507, Uranium hexafluoride, radioactive 
material, excepted package, less than 0.1 kg per package, non-fissile 
or fissile-excepted'', to address small quantities of uranium 
hexafluoride containing corrosive properties, thus a new special 
provision is necessary in the HMR. In this NPRM, PHMSA proposes the 
assignment of special provision 369 to UN3507 to specify a primary 
hazard of Class 8 with subsidiary risk of Class 7, subject to certain 
conditions. The provisions in special provision 369 relating to 
conditions required when it is evident that packages have leaked are 
consistent with language proposed for inclusion in Sec.  173.443(e) in 
HM-250 [Docket No. PHMSA-2009-0063]. PHMSA notes that if the proposed 
addition of these provisions in Sec.  173.443(e) occurs, the portion of 
the text proposed in this NPRM referring to leaking packages may be 
replaced with a reference to Sec.  173.443(e).
Special Provision 370
    In this NPRM, PHMSA proposes adding new special provision 370 and 
assigning it to the revised HMT entry ``UN0222, Ammonium Nitrate.'' As 
a result of the comma placement in the descriptions for the two 
ammonium nitrate entries, UN1942 and UN0222, the manner in which the 
0.2% combustible materials/substances level is calculated would lead to 
different analyses and different, non-comparable results. In 
conjunction with revising the proper shipping name for UN0222 by 
removing the qualifying text, in this NPRM, PHMSA is proposing a new 
special provision assigned to UN0222 to include the qualifying text 
previously attached to the proper shipping name and further clarify the 
criteria for use of this entry by stipulating the following conditions: 
(1) Ammonium nitrate with more than 0.2% combustible substances, 
including any organic

[[Page 50759]]

substance calculated as carbon, to the exclusion of any added 
substance; or (2) ammonium nitrate with not more than 0.2% combustible 
substances, including any organic substance calculated as carbon, to 
the exclusion of any added substance, that gives a positive result when 
tested in accordance with Test Series 2 of the UN Manual of Tests and 
Criteria, Part I.
Special Provision 371
    In this NPRM PHMSA proposes adding a new special provision 371 and 
assigning it to ``UN3164, Articles, pressurized pneumatic or hydraulic 
containing non-flammable gas.'' This special provision sets forth the 
requirements for confetti-shooters pressurized with gas instead of 
pyrotechnics. The shooter consists in principle, of a jacket of 
cardboard, the pressurized receptacle filled with compressed air or 
nitrogen, a lock mechanism made of plastics, a plug of rubber and a 
metal cap for closing the receptacle and different types of confetti. 
By turning a ring, or the bottom part of the shooter, a mechanism is 
unlocked and the pressurized gas is discharged so that the confetti is 
shot away for a few meters. This type of shooter does not contain any 
amount of explosives and therefore cannot be assigned to Class 1, and 
does not meet the requirements for gas cartridges or small pressure 
receptacles. The requirements set forth in the special provision ensure 
the same level of safety as for confetti-shooters with pyrotechnics.
Special Provision 372
    In this NPRM, PHMSA proposes adding new special provision 372 and 
assigning it to the new HMT entry ``UN3508, Capacitor, asymmetric.'' 
This special provision states that this entry applies to asymmetric 
capacitors with an energy storage capacity greater than 0.3 watt hours 
(Wh) and that asymmetric capacitors with an energy storage capacity of 
0.3 Wh or less are not subject to the requirements of this subchapter. 
This special provision also provides that nickel-carbon asymmetric 
capacitors containing Class 8 alkaline electrolytes must be transported 
as UN 2795, Batteries, wet, filled with alkali, electric storage.
Special Provision A60
    Special provision A60 permits ``UN2014, Hydrogen peroxide, aqueous 
solution,'' to be transported in excepted quantities. The special 
provision authorizes packagings to include a vent to permit the slow 
escape of gas (i.e. not more than 0.1 mL/hour per 30 mL inner packaging 
at 20 [deg]C (68[emsp14][deg]F) produced from gradual decomposition. As 
venting is permitted, the requirements of Sec. Sec.  173.24(g)(1) and 
173.27(c) are impracticable and should not apply. To address the issue, 
the ICAO DGP adopted a proposal to clarify these general requirements 
prohibiting venting should not be applicable. In this NPRM, we are 
proposing to harmonize with the ICAO TI with regard to waiving the 
general requirements of Sec. Sec.  173.24(g)(1) and 173.27(c). Special 
provision A60 is revised accordingly.
Special Provision A61
    In this NPRM, PHMSA proposes adding new special provision A61 and 
assigning it to the to the HMT entries ``UN 3107, Organic peroxide type 
E, liquid'' and ``UN 3109, Organic peroxide type F, liquid.'' PHMSA 
proposes to align with Packing Instruction 570 of the ICAO TI to allow 
for limited venting of oxygen in the case of specialized peroxyacetic 
acid packagings when transported by cargo aircraft provided the 
packaging requirements of this special provision are met. It was 
reported to the ICAO DGP that peroxyacetic acid was commonly used as a 
sterilizer for health care purposes and that there is a need to 
transport the material by air for use in sterilizing medical equipment 
using custom packagings. The basis for the requirements that these 
specialized packagings must meet originated from exemptions to permit 
the transport of this substance in small containers approved by 
appropriate national authorities in four States. The inclusion of this 
new special provision will eliminate the need for these exemptions and 
facilitate international transport.
IBC Codes and IP Codes
    The introductory paragraph (c)(4) states that packagings are 
authorized for the Packing Group III entries of specific proper 
shipping names when either Special Provision IB3 or IB8 is assigned to 
that entry in the Sec.  172.101 Table. When no IB code is assigned in 
the Sec.  172.101 Table for a specific proper shipping name, or in 
Sec.  173.225(e) Organic Peroxide Table for Type F organic peroxides, 
use of an IBC or Large Packaging for the material may be authorized 
when approved by the Associate Administrator.
    In this NPRM, PHMSA proposes to revise the introductory paragraph 
(c)(4) by adding a reference to Sec.  173.185, preceding the reference 
to Sec.  173.225(e), thereby authorizing the use of Large Packagings 
for lithium batteries without assigning IB3 or IB8 to the corresponding 
entries in the Sec.  172.101 Table. See Section 173.185 Lithium 
batteries for a detailed discussion of the proposed a use of rigid 
large packagings for lithium batteries.
    In two final rules published in the Federal Register on January 19, 
2011 (76 FR 3308; HM-215K) and January 7, 2013 (78 FR 988; HM-215L) the 
Table 1 (IBC Codes) in paragraph (c)(4) were editorially revised to 
remove UN Specifications 31A, 31B, 31N, 31H1, 31H2, 31HZ1, and 31HZ2 
from IBC Codes IB4 through IB8. The revisions were consistent with 
amendments to international standards that removed the specifications 
from the indicated codes in the table because IBC Codes IB4 through IB8 
are assigned to solids, whereas, UN Specifications 31A, 31B, 31N, 31H1, 
31H2, 31HZ1, and 31HZ2 are authorized for transportation of liquids in 
IBC Codes IB1 through IB3 and are assigned to liquid materials only. 
Information presented to the UN Committee of Experts on the Transport 
of Dangerous Goods (UNCOE) in this last biennium indicated that the 
removal of the above UN Specifications from IBC Codes IB4 through IB8 
has created a problem. Prior to implementation of these revisions, 
certain liquid IBC types were used to transport powdery solids and 
solids that become liquid under conditions of transport. These solids 
may be loaded and unloaded from the IBC in liquid form raising the 
question of whether the remaining IBC's, which are intended for gravity 
or pressure discharge, are appropriate. The UN sub-committee adopted a 
proposal to reinstate the IBC's that were previously authorized. In 
this NPRM, we are proposing to harmonize with the UN Model Regulations 
by revising the IBC Codes IB4 through IB8 in paragraph (c)(4), the 
Table 1 (IBC Codes) to reinstate IBC's previously authorized.
    A new IP Code 16 is added and assigned to UN3375. Consistent with 
international regulations, this special provision would authorize 
require IBCs of type 31A and 31N if approved by the Associate 
Administrator.
Special Provision TP47
    In this NPRM, PHMSA proposes adding new special provision TP47 and 
assigning it to the organometallic substance HMT entries UN3393 through 
UN3399. The special provision waives the 2.5 year internal inspection 
for portable tanks used for the transport of liquid and solid 
organometallic substances provided that the portable tank remains in 
the dedicated service of transporting organometallic substances. 
However, all other required 2.5 year inspections and tests would still 
be

[[Page 50760]]

performed, as well as the full 5 year periodic test and inspection, 
which would include an internal inspection.
    This special provision is added for the following reasons. Before 
an internal inspection can be performed, the tank must be cleaned and 
purged. In this process, it is difficult to ensure that all water or 
other impurities or contaminants introduced during the cleaning are 
fully removed before organometallic substances are again introduced 
into the tank potentially resulting in a dangerous reaction or have an 
effect on the purity of the product. Since these organometallic 
substances are fully compatible with, and, in particular, are not 
corrosive to the materials of construction used in such tanks, the 
likelihood that an internal inspection will reveal any corrosion, 
pitting or other deterioration of the tank is unlikely. In order to 
increase safety and avoid the risk of a dangerous reaction or product 
contamination the 2.5 year internal inspection is waived, provided the 
portable tank remains in the dedicated service of transporting 
organometallic substances and the tank does exhibit damaged or corroded 
areas, or leakage, or other conditions that indicate a deficiency in 
accordance with Sec.  180.605(f).
Section 172.315
    To promote the uniformity of markings, the UN Model Regulations 
have adopted revisions to clarify and standardize the specifications 
for limited quantity marking, including the air limited quantity 
marking. In this NPRM, PHMSA is proposing to revise the specifications 
for the limited quantity markings prescribed in Sec.  172.315(a)(2) and 
(b)(2) to be consistent with the revised specifications for these 
markings in the UN Model Regulations. Also consistent with the UN Model 
Regulations, we propose to allow manufacturers and printers necessary 
time to retool to produce markings that conform to the revised 
specifications, and to allow for the depletion of supplies of existing 
markings. PHMSA proposes a transitional period to authorize a limited 
quantity marking that is in conformance with the requirements of the 
regulations in effect on October 1, 2012, to be used until December 31, 
2016.
Section 172.317
    To promote the uniformity of the ``Keep Away From Heat'' handling 
mark throughout the international transportation community, revisions 
have been adopted in the ICAO Technical Instructions to clarify and 
standardize the specifications for this hazard communications element. 
In this NPRM, PHMSA is proposing to revise the specifications for the 
``Keep Away From Heat'' handling mark prescribed in Sec.  172.317(b) to 
be consistent with the revised specifications for this marking in the 
ICAO TI. Also, we propose to allow manufacturers and printers necessary 
time to retool to produce markings that conform to the revised 
specifications, and to allow for the depletion of supplies of existing 
markings. Thus we propose a transitional period to authorize a ``Keep 
Away From Heat'' handling mark that is in conformance with the 
requirements of the regulations in effect on October 1, 2012, to be 
used until December 31, 2016.
Section 172.322
    In this NPRM, PHMSA is proposing to clarify in Sec.  172.322(a)(2) 
and (b), that the marking requirements for marine pollutants are 
required unless otherwise provided for in the regulations.
    In Sec.  172.322 paragraph (e) PHMSA is proposing to delete the 
obsolete date of January 14, 2010 for the requirements for the marine 
pollutant mark.
    To promote the uniformity of the marine pollutant mark throughout 
the international transportation community, the UN Model Regulations 
have adopted revisions to clarify and standardize the specifications 
for this hazard communications element. In this NPRM, PHMSA is 
proposing to revise the specifications for the marine pollutant mark 
prescribed in Sec.  172.322(e) to be consistent with the revised 
specifications for this marking in the UN Model Regulations. Also, to 
allow manufacturers and printers necessary time to retool to produce 
markings that conform to the revised specifications, and to allow for 
the depletion of supplies of existing markings, we propose a 
transitional period to authorize a marine pollutant mark that is in 
conformance with the requirements of the regulations in effect on 
October 1, 2012, to be used until December 31, 2016.
Section 172.327
    To promote the uniformity of markings, in this NPRM, PHMSA is 
proposing to revise and clarify the specifications for the ``petroleum 
sour crude oil'' mark prescribed in Sec.  172.327(a) to be consistent 
with the revised specifications for markings in the UN Model 
Regulations. Also, to allow manufacturers and printers necessary time 
to retool to produce markings that conform to the revised 
specifications, and to allow for the depletion of supplies of existing 
markings, we propose a transitional period to authorize a ``petroleum 
sour crude oil'' mark that is in conformance with the requirements of 
the regulations in effect on October 1, 2012, to be used until December 
31, 2016.
Section 172.407
    To promote the uniformity of hazard communications labels 
throughout the international transportation community, revisions have 
been adopted in the UN Model Regulations to clarify and standardize the 
specifications for labels. In this NPRM, PHMSA is proposing to revise 
the specifications for labels prescribed in Sec.  172.407(a) to be 
consistent with the revised specifications for labels in the UN Model 
Regulations. In addition, PHMSA is proposing to revise the (d)(2)(iii) 
that provides a color alternative for the symbol on the ORGANIC 
PEROXIDE LABEL to be consistent with the UN Model Regulations. Also to 
be consistent with the UN Model Regulations, and to allow manufacturers 
and printers necessary time to retool to produce labels that conform to 
the revised specifications, and to allow for the depletion of supplies 
of existing labels, we propose a transitional period to authorize a 
label that is in conformance with the requirements of the regulations 
in effect on October 1, 2012, to be used until December 31, 2016.
    Finally, PHMSA is proposing to add paragraph (d)(2)(iv) to permit, 
consistent with the UN Model Regulations, a FLAMMABLE GAS label to be 
displayed on cylinders and gas cartridges for liquefied petroleum 
gases, where the symbol may be shown in the background color of the 
receptacle if adequate contrast is provided.
Section 172.512
    The placarding requirements for freight containers and aircraft 
unit load devices are described in Sec.  172.512. The reference in 
Sec.  172.512(a)(3) to part 7; chapter 2, section 2.7 of the ICAO TI in 
this paragraph is inaccurate. This reference became inaccurate in the 
2013-2014 Edition of the ICAO TI where the ICAO DGP re-designated part 
7; chapter 2; section 2.6 as a new requirement for visibility of 
labels, moving all subsequent sections up. Part 7; chapter 2, section 
2.7 of the ICAO TI now refers to replacement of labels, whereas section 
2.8 refers to identification of unit load devices containing dangerous 
goods. PHMSA is revising this paragraph for the correct

[[Page 50761]]

reference to cite part 7; chapter 2, section 2.8.
Section 172.519
    To promote the uniformity of hazard communications placards 
throughout the international transportation community, revisions have 
been adopted in the UN Model Regulations have adopted revisions to 
clarify and standardize the specifications for placards. In this NPRM, 
PHMSA is proposing to revise the specifications for placards prescribed 
in Sec.  172.519(c) to be consistent with the revised specifications 
for labels in the UN Model Regulations. Additionally, to allow 
manufacturers and printers necessary time to retool to produce placards 
that conform to the revised specifications, and to allow for the 
depletion of supplies of existing placards, a transitional period is 
proposed. This transitional period would authorize a placard that is in 
conformance with the requirements of the regulations in effect on 
October 1, 2012, to be used until December 31, 2016. Finally, PHMSA 
realizes that in domestic transportation, numerous placards of a semi-
permanent nature are in service. PHMSA is proposing that for domestic 
transportation, a placard manufactured prior to January 1, 2017, in 
conformance with the requirements of the regulations in effect on 
October 1, 2012, may continue in service until the end of its useful 
life provided the color tolerances are maintained and are in accordance 
with the display requirements of the subchapter.

Part 173

Section 173.2a
    Section 173.2a outlines classification requirements for materials 
having more than one hazard. In this NPRM, PHMSA is proposing to amend 
paragraph (a)(1) to note that shipments of uranium hexafluoride, 
radioactive material, excepted package, less than 0.1 kg per package 
are not required to apply the radioactive hazard as the primary hazard. 
This change is being proposed to incorporate the transportation 
provisions for excepted packages of uranium hexafluoride adopted in the 
18th Revised Edition of the UN Model Regulations, the IMDG Code and the 
ICAO TI.
Section 173.3
    To promote the uniformity of hazard communications markings 
throughout the international transportation community, the UN Model 
Regulations have adopted revisions to clarify and standardize the 
specifications for placards. In this NPRM, PHMSA is proposing to revise 
the specifications for markings for salvage packagings prescribed in 
Sec.  173.3(c)(3); salvage cylinders prescribed in Sec.  173.3(d)(3); 
and to prescribe requirements for the marking of the proposed large 
salvage packaging in Sec.  173.3(f) to be consistent with the revised 
specifications for salvage packaging markings in the UN Model 
Regulations. Also, to be consistent with the UN Model Regulations, and 
to allow shippers necessary time to implement the new marking 
requirements, we propose a transitional period to authorize a marking 
that is in conformance with the requirements of the regulations in 
effect on October 1, 2012, to be used until December 31, 2016. Finally, 
PHMSA realizes that in domestic transportation numerous salvage and 
salvage cylinder markings are in service that are of a more permanent 
nature. In recognition of this PHMSA is proposing that for domestic 
transportation, a salvage packaging or a salvage cylinder that is 
permanently marked prior to January 1, 2017 in conformance with the 
requirements of the regulations in effect on October 1, 2012, may 
continue in service until the end of its useful life.
    Also PHMSA is proposing to add a new paragraph (f) to Sec.  173.3 
authorizing and prescribing the use of large salvage packaging for all 
modes of transportation other than air.
Section 173.4a
    To promote the uniformity of markings, throughout the international 
transportation community, the UN Model Regulations have been revised to 
clarify and standardize the specifications for the excepted quantities 
marking. In this NPRM, PHMSA is proposing to revise the specifications 
for the excepted quantities marking prescribed in Sec.  173.4a(g)(2) to 
be consistent with the revised specifications for these markings in the 
UN Model Regulations. Also consistent with the UN Model Regulations, we 
propose to allow manufacturers and printers necessary time to retool to 
produce markings that conform to the revised specifications, and to 
allow for the depletion of supplies of existing markings, a 
transitional period is being proposed to authorize an excepted 
quantities marking that is in conformance with the requirements of the 
regulations in effect on October 1, 2012, to be used until December 31, 
2016.
Section 173.9
    To promote the uniformity of markings, UN Model Regulations have 
been revised to clarify and standardize the specifications for the 
fumigant marking. In this NPRM, PHMSA is proposing to revise the 
specifications for the fumigant marking prescribed in Sec.  173.9(e) to 
be consistent with the revised specifications for these markings in the 
UN Model Regulations. Also consistent with the UN Model Regulations, to 
allow manufacturers and printers necessary time to retool to produce 
markings that conform to the revised specifications, and to allow for 
the depletion of supplies of existing markings, we propose a 
transitional period to authorize a fumigant marking that is in 
conformance with the requirements of the regulations in effect on 
October 1, 2012, to be used until December 31, 2016.
Section 173.11
    In this NPRM, PHMSA proposes to add a new Sec.  173.11 providing 
exceptions to the regulations for certain lamps containing hazardous 
materials based on their transport conditions, the quantity of 
hazardous materials contained in each lamp or package, and the type of 
packaging. This proposed new section is consistent with newly adopted 
provisions in the UN Model Regulations.
Section 173.24
    In this NPRM, PHMSA proposes to revise Sec.  173.24 to authorize 
the use of supplementary packagings within an outer packaging (e.g., an 
intermediate packaging or a receptacle inside a required inner 
packaging) in addition to what is required by the regulations provided 
all applicable requirements are met and, if appropriate suitable 
cushioning is used to prevent movement within the packaging. This 
proposed revision is consistent with newly adopted provisions in the UN 
Model Regulations.
Section 173.25
    To promote the uniformity of markings, the UN Model Regulations 
have been revised to clarify and standardize the specifications for the 
overpack marking. In this NPRM, PHMSA is proposing to revise the 
specifications for the overpack marking prescribed in Sec.  
173.25(a)(4) to be consistent with the revised specifications for these 
markings in the UN Model Regulations. Also consistent with the UN Model 
Regulations, to allow manufacturers and printers necessary time to 
retool to produce markings that conform to the revised specifications, 
and to allow for the depletion of supplies of existing markings, we 
propose a transitional

[[Page 50762]]

period to authorize an overpack marking that is in conformance with the 
requirements of the regulations in effect on October 1, 2012, to be 
used until December 31, 2016.
Section 173.62
    Consistent with the UN Model Regulations, in this NPRM, PHMSA is 
proposing to revise Sec.  173.62 relating to specific packaging 
requirements for explosives as follows:
    In paragraph (b), in the Explosives Table, the entry for UN0222 is 
revised to expand the packaging authorizations to include Packing 
Instruction 117 in addition to the existing Packaging Instructions 
112(b) and 112(c).
    In paragraph (c), in the Table of Packing Methods, Packing 
Instruction 116 would be revised to delete provision 5, which states 
that woven plastic bags (5H2 or 5H3) must be used only for UN 0082, 
0241, 0331 and 0332. Packing Instruction 117 would be revised to add 
provision 5 which states, ``For UN0222, when other than metal or rigid 
plastics IBCs are used, they must be offered for transportation in a 
closed freight container or a closed transport vehicle.''; and 
provision 6 which states, ``For UN0222, flexible IBCs must be sift-
proof and water-resistant or must be fitted with a sift-proof and 
water-resistant liner.'' Packing Instructions 131 and 137 would be 
revised to expand the authorization for outer packagings to include 
solid plastic boxes (4H2).
Section 173.115
    Section 173.115 prescribes the definitions for Class 2 materials. 
In this NPRM a new paragraph (m) is proposed to define the term 
``Adsorbed gas''. The term means a gas which when packaged for 
transport is adsorbed onto a solid porous material resulting in an 
internal receptacle pressure of less than 101.3 kPa at 20 [deg]C and 
less than 300 kPa at 50 [deg]C.
    Currently the HMR do not prescribe requirements for the transport 
of adsorbed gases. In this NPRM, PHMSA is proposing to adopt various 
transportation requirements for adsorbed gases. Prior to adoption of 
such standards, the term ``Adsorbed gas'' must be defined. Therefore in 
this NPRM we are proposing to adopt the above definition of an adsorbed 
gas based on the definition found in the 18th Revised Edition of the UN 
Model Regulations, the IMDG Code and the ICAO TI.
Section 173.121
    Section 173.121 prescribes the requirements for the selection of 
packing groups for Class 3 flammable liquids. Paragraph (b) of this 
section describes the criteria for inclusion of viscous Class 3 
materials in Packing Group III. Paragraph (b)(1)(ii) currently states 
that the mixture cannot contain any substances with a primary or 
subsidiary risk of Division 6.1 or Class 8. In this NPRM, PHMSA 
proposes to revise paragraph (b)(1)(ii) to clarify that a mixture or 
any separated solvent cannot contain any substances with a primary or 
subsidiary risk of Division 6.1 or Class 8. This proposed change is 
consistent with the current language in the 18th Revised Edition of the 
UN Model Regulations, the IMDG Code and the ICAO TI.
Section 173.127
    In this NPRM, PHMSA is proposing to revise Sec.  173.127(a) to 
authorize an alternative test for assigning packing groups to Division 
5.1 oxidizing solids. The proposed test is in addition to the currently 
authorized test using potassium bromate. The alternative test uses 
calcium peroxide as a reference substance which is neither carcinogenic 
nor as acutely toxic as potassium bromate. In addition, the proposed 
alternative test replaces the highly subjective visual determination of 
the burning time with a gravimetric determination of the burning rate. 
This change is consistent with the test adopted into the UN Model 
Regulations.
Section 173.151
    Section 173.151 provides exceptions for Class. In this NPRM PHMSA 
is proposing to revise paragraph (b) to replace a pre-existing 
paragraph (b)(2) relating to exceptions for charcoal briquettes 
(NA1361) that was inadvertently deleted in the final rule dated January 
7, 2013 (HM-215K; 78 FR 1101).
Section 173.161
    Section 173.161 prescribes packaging requirements for chemical kits 
and first aid kits that contain small amounts of hazardous materials. 
Paragraph (b)(2) contains the requirement that ``The packing group 
assigned to the chemical kit and first aid kit as a whole must be the 
most stringent packing group assigned to any individual substance in 
the kit.'' This requirement creates problems for shippers and air 
transport acceptance personnel because it does not specify what must be 
shown for the packing group on the shipping paper or what packaging 
standard must be applied to kits containing hazardous materials to 
which no packing group is assigned. In this NPRM, PHMSA is proposing to 
revise paragraph (b)(2) to require that for kits containing only 
hazardous materials to which no packing group is assigned, a packing 
group need not be indicated on the shipping paper although such 
packagings shall meet the Packing Group II performance level.
Section 173.164
    Section 173.164 prescribes requirements for the transportation of 
Mercury (metallic and articles containing mercury). In this NPRM, PHMSA 
is eliminating the existing exception for lamps containing mercury in 
paragraph (b)(5). This paragraph will be redundant and unnecessary 
since this exception will be covered in the proposed new Sec.  173.11 
relating to exceptions for shipment of lamps containing hazardous 
materials.
Section 173.166
    Section 173.166 prescribes requirements for the transportation of 
air bag inflators, air bag modules and seat-belt pretensioners, UN3268 
and UN0503. Due to technological developments, new safety devices for 
vehicles are becoming available. The devices include pyromechanical 
devices that meet the definition of a hazardous material but are not 
accurately described by the proper shipping names Air bag inflators, 
Air bag modules, or Seat-belt pretensioners. The proper shipping name 
for these devices has been revised in the UN Model Regulations to 
``Safety devices, electrically initiated'' for UN 3268 and ``Safety 
devices, pyrotechnic'' for UN0503. Consistent with the UN Model 
Regulations, in this NPRM, PHMSA is proposing to adopt these revised 
proper shipping names and revise Sec.  173.166 to adopt the term 
``Safety Devices'' for these items. An entry for the existing proper 
shipping name ``Air bag inflators, or Air bag modules, or Seat-belt 
pretensioners'' has been left in the Sec.  172.101 Hazardous Materials 
Table to direct the reader to the new proper shipping names ``Safety 
devices, electrically initiated'' and ``Safety devices, pyrotechnic.''
    Also, the current Sec.  173.166(b)(1)(iv) provides that under 
certain conditions a Class 9 (UN3268) air bag inflator, air bag module, 
or seat-belt pretensioner design is not required to be submitted to the 
Associate Administrator for approval or assigned an EX number. Air bag 
inflators, air bag modules, and seat-belt pretensioners have a long 
history of safety in their design and manufacture. However, new types 
of safety devices such as pyromechanical devices do not yet have an 
established history. Therefore in the interest of safety PHMSA is 
proposing not to extend this

[[Page 50763]]

exception to all Class 9 safety devices but only maintain this 
exception for air bag inflators, air bag modules, and seat-belt 
pretensioners and still require that other types of safety devices, 
such as pyromechanical devices, that are candidates for Class 9 be 
submitted to the Associate Administrator for approval or assigned an EX 
number. Finally, in this NPRM, PHMSA proposes to add a new paragraph 
(d)(5) to Sec.  173.166 to permit the continued transportation of an 
air bag inflator, air bag module, or seat-belt pretensioner that was 
classed and approved for transportation prior to January 1, 2015 under 
the terms of the existing approval, using the proper shipping name 
``Safety Devices'' or ``Safety Devices, Pyrotechnic'' as appropriate.
Section 173.167
    Section 173.167 prescribes the requirements for consumer 
commodities intended for air transportation. In this NPRM, PHMSA is 
proposing to revise the drop test requirements in (a)(4) by including 
the criteria for passing the test. A completed consumer commodity 
package will be considered to have passed the drop test if the outer 
packaging does not exhibit any damage liable to affect safety during 
transport and there is no leakage from the inner packaging(s).
Section 173.176
    Section 173.176 addresses capacitors by prescribing the testing, 
marking, safety, and packaging requirements for electric double layer 
capacitors with energy storage capacity greater than 0.3 watt hours 
(Wh). In this NPRM, PHMSA is proposing to revise section 173.176 to 
include provisions for asymmetric capacitors in accordance with the new 
HMT entry ``UN3508, Capacitor, asymmetric (with an energy storage 
capacity greater than 0.3Wh).'' In addition, paragraph (a)(5) presently 
requires that capacitors must be marked with the energy storage 
capacity in Wh. As many pre-existing capacitors do not have Wh marking 
they are not permitted to be transported even when all other 
requirements of this section are met. In this NPRM, PHMSA is proposing 
to amend paragraph (a)(5) to require that the Wh marking is required 
for non-asymmetric capacitors manufactured after December 31, 2013 and 
for asymmetric capacitors manufactured after December 31, 2015.
Section 173.181
    Section 173.181 prescribes the non-bulk packaging requirements 
applicable to pyrophoric liquids. On January 7, 2013, PHMSA published 
final rule PHMSA-2012-0027 (HM-215L) [78 FR 987] to maintain alignment 
with international standards by incorporating various amendments, 
including changes to proper shipping names, hazard classes, packing 
groups, special provisions, packaging authorizations, air transport 
quantity limitations, and vessel stowage requirements. In that final 
rule PHMSA revised paragraphs (b) and (c) to add authorizations for 
additional authorized packagings for these materials. Paragraphs (c) 1-
3 were inadvertently deleted due to an incorrect amendatory instruction 
and in this NPRM PHMSA is proposing to place paragraphs (c) 1-3 back 
into Sec.  173.181 as they were prior to the publication of HM-215L. It 
was never PHMSA's intention to remove these important safety provisions 
for the transport of pyrophoric liquids, and we ask individuals who 
package and offer these materials to continue to abide by these 
requirements pending their reinsertion in the HMR.
Section 173.185
    In this NPRM, PHMSA is proposing to add paragraph (b)(6) and revise 
paragraph(f)(3) to authorize and prescribe the use of a large packaging 
for a single large lithium battery or a battery contained in equipment. 
This authorization does not include transportation by aircraft. The 
proposed addition of this packaging type into this section is 
consistent with provisions for lithium batteries in the UN Model 
Regulations.
    The ICAO DGP took a decision during the most recent biennium to 
remove the alternative written documentation option in Section IB of 
ICAO Packing Instructions 965 and 968 and instead require a standard 
transport document (shipping paper). Section IB is applicable to 
packages that exceed the number or quantity (mass) limits for smaller 
lithium batteries in Section II of Packing Instructions 965 and 968 
excepting such packages from specification packaging requirements when 
containing no more than 2.5 kg of lithium metal cells or batteries or 
10 kg of lithium ion cells or batteries per package. As this revision 
will appear in the 2015-2016 Edition of the ICAO TI, in this NPRM PHMSA 
is proposing to amend paragraph (c)(4)(v) to require a shipping paper 
for these packages containing no more than 2.5 kg of lithium metal 
cells or batteries or 10 kg of lithium ion cells or batteries per 
package. PHMSA is seeking input as to the costs and benefits of 
harmonizing the provisions of the HMR with the provisions of the ICAO 
Technical Instructions by requiring shipping papers as opposed to 
alternative documentation. PHMSA also solicits comments on the costs 
and benefits of maintaining a domestic difference within the HMR to 
continue to allow the use of the alternative documentation in lieu of a 
shipping paper as required by the ICAO Technical Instructions.
    The ICAO Working Group on Lithium Batteries, at their April 2014 
meeting, forbid the shipment of lithium metal cells and batteries as 
cargo on passenger aircraft with the exception of lithium metal cells 
and batteries packed with or contained in equipment not exceeding 5 kg 
net weight. This prohibition of lithium metal batteries as cargo on 
passenger aircraft is consistent with current HMR requirements. As a 
consequence to this prohibition, Section II of Packing Instruction 968 
in the ICAO TI was amended to require shipments of small lithium metal 
cells and batteries to display the ``CARGO AIRCRAFT ONLY'' label where 
previously only a lithium battery handling marking was required. 
Presently under the HMR, a package containing such lithium metal cells 
or batteries as provided in Sec.  173.185(c)(1)(iii), is required to be 
marked ``PRIMARY LITHIUM BATTERIES--FORBIDDEN FOR TRANSPORT ABOARD 
PASSENGER AIRCRAFT'' or ``LITHIUM METAL BATTERIES--FORBIDDEN FOR 
TRANSPORT ABOARD PASSENGER AIRCRAFT.'' Following the change to the ICAO 
TI, the present text marking will now be redundant for international 
shipments. In this NPRM, PHMSA is proposing to provide an alternative 
to the existing marking requirement in Sec.  173.185(c)(1)(iii) with 
the option to display a ``CARGO AIRCRAFT ONLY'' label. This allowance 
to either utilize the current marking or the ``CARGO AIRCRAFT ONLY'' 
label will provide shippers with the flexibility to utilize supplies of 
preprinted markings or packagings, while also allowing shippers to 
transition to the use of the ``CARGO AIRCRAFT ONLY'' if desired.
Section 173.199
    To promote the uniformity of markings, the UN Model Regulations 
have been revised to clarify and standardize the specifications for the 
square-on-point marking for Category B infectious substances. In this 
NPRM, PHMSA is proposing to revise the specifications for the Category 
B infectious substance marking prescribed in Sec.  173.199(a)(5) to be 
consistent with the revised specifications for these markings in the UN 
Model Regulations. Also consistent with the UN Model Regulations, to 
allow manufacturers and

[[Page 50764]]

printers necessary time to retool to produce markings that conform to 
the revised specifications, and to allow for the depletion of supplies 
of existing markings, we propose a transitional period to authorize a 
Category B infectious substance marking that is in conformance with the 
requirements of the regulations in effect on October 1, 2012, to be 
used until December 31, 2016.
Section 173.225
    Section 173.225 prescribes packaging requirements and other 
provisions for organic peroxides. In this NPRM, PHMSA is proposing to 
revise the Organic Peroxide Portable Tank Table in paragraph (g). PHMSA 
proposes to revise the entry in the second column of the table 
pertaining to the hazardous material ``Peroxyacetic acid, distilled, 
stabilized, not more than 41%'' to include a Note 1, that a 
````Corrosive'' subsidiary risk placard is required.'' The proposed 
adoption of this requirement is consistent with the requirements in the 
UN Model Regulations.
Section 173.231
    Currently, the Sec.  172.101 HMT Column (8B) and (8C) packaging 
authorization for Ammonium nitrate emulsion, suspension, or gel, 
UN3375, directs the reader to Sec.  173.214 which requires that 
packagings and method of shipment must be approved by the Associate 
Administrator prior to the first shipment. In this NPRM, PHMSA is 
proposing to add a new Sec.  173.231 titled ``Ammonium nitrate 
emulsion, suspension or gel'' and assigned this section to UN3375 to 
authorize and prescribe the use of packagings for this material. The 
requirements of the proposed new section are consistent with the 
requirements in the UN Model Regulations.
 Section 173.301b
    In this NPRM, PHMSA is proposing to revise paragraph (c) relating 
to pressure receptacle valve requirements to include that a valve 
manufactured on or before December 31, 2008, conforming to the 
requirements in ISO 10297:1999 is authorized. This proposed revision is 
consistent with the requirements in the UN Model Regulations.
Section 173.302
    In this NPRM, PHMSA is proposing to adopt the new UN Model 
Regulation requirements for the transportation of adsorbed gases in 
cylinders. This section specifies requirements for the filling of 
cylinders with non-liquefied (permanent) compressed gases. PHMSA is 
proposing to amend the title of this section and to amend paragraph (a) 
to include and specify requirements for the transportation of adsorbed 
gases.
Section 172.302c
    In this NPRM, PHMSA is proposing to add a new Sec.  173.302c to 
adopt the new authorization in the UN Model Regulations for the 
transportation of adsorbed gases in UN pressure receptacles. The 
proposed adoption of these requirements into this new section is 
consistent with the requirements in the UN Model Regulations.
Section 173.307
    Section 173.307 provides exceptions from the regulations for 
compressed gases. In this NPRM, PHMSA is proposing to revise paragraph 
(a)(5) relating to manufactured articles or apparatuses to clarify that 
the exception for manufactured articles does not include lamps. The 
exceptions for lamps are contained in the proposed new Sec.  173.11 
relating to exceptions for shipment of lamps containing hazardous 
materials. Also, we are proposing to revise paragraph (a)(6) relating 
to light bulbs to clarify that the exceptions does not apply to lamps 
as described in the proposed new Sec.  173.11 relating to exceptions 
for shipment of lamps containing hazardous materials.
Section 173.309
    Section 173.309 prescribes requirements for fire extinguishers. In 
this NPRM, we are proposing to add a new introductory paragraph 
describing fire extinguisher types authorized for transport in 
accordance with this section and covered by the HMT entry ``UN1044, 
Fire extinguishers.''
Section 173.403
    Consistent with the UN Model regulations, in this NPRM, PHMSA is 
proposing to revise two definitions in Sec.  173.403 relating to the 
transportation of Class 7 (Radioactive Materials). ``Exclusive Use'' is 
being revised to clarify that it also applies to the shipment of the 
load and that exclusive use only applies when compliance is required by 
the regulations. ``Freight Container'' is being revised to eliminate 
the requirement that a ``small freight container'' has one outer 
dimension less than 1.4 m (4.9 feet).
Section 173.420
    Section 173.420 prescribes the transport conditions for Uranium 
hexafluoride. In this NPRM PHMSA is proposing to amend paragraph (d) 
which provides the requirements for shipments of uranium hexafluoride 
in quantities less than 0.1 kg to incorporate changes made by the IAEA 
in SSR-6 that were subsequently incorporated in the UN Model 
Regulations. In this NPRM PHMSA is proposing to amend this paragraph to 
note that fissile-excepted shipments less than 0.1 kg may be offered 
under UN3507. PHMSA is proposing to amend the requirements for these 
shipments to align with IAEA SSR-6 requirements, while maintaining 
general packaging requirements from Sec. Sec.  173.24 and 173.24a.

Part 175

Section 175.9
    Section 175.9 prescribes the applicability of the HMR to special 
aircraft and rotocraft operations. This section also prescribes the 
conditions under which certain operations may be performed in 
accordance with 14 CFR and 49 CFR (e.g., avalanche and weather 
control). Consistent with the ICAO TI, in this NPRM, PHMSA is proposing 
to revise paragraphs (b)(6) and (b)(6)(v) by including ``ice jam 
control'' and ``landslide clearance'' for operations where explosives 
are used in a similar manner to avalanche control.
Section 175.10
    Section 175.10 specifies the conditions for which passengers, crew 
members, or an operator may carry hazardous materials aboard an 
aircraft. Consistent with revisions to the ICAO TI, in this NPRM, PHMSA 
is proposing several revisions to this section.
    PHMSA is proposing to revise paragraph (a)(11), applicable to 
passenger provisions for self-inflating life jackets, to include 
different types of self-inflating personal safety devices in order to 
account for those carried by, but not limited to, motorcycle and 
horseback riders. In addition, PHMSA is clarifying that a passenger is 
limited to one self-inflating safety device, in addition to two spare 
cartridges, and is requiring that both the safety device and spares be 
packed in such a manner that they cannot be accidently activated.
    PHMSA is proposing to add a new subparagraph (a)(18)(iv) to clarify 
that articles containing lithium metal or lithium ion cells or 
batteries, with a primary function to provide power to another device, 
must carried as spare batteries in accordance with the provisions of 
this paragraph.
    PHMSA is proposing to revise paragraph (a)(24), applicable to small 
cartridges for other devices, by amending the phrase ``small 
cylinders'' to the more appropriate phrase ``small cartridges,'' and 
restricting the carriage of small gas cartridges to only those without 
a subsidiary risk. The existing

[[Page 50765]]

operator approval requirement was moved to make it more clearly align 
with the ICAO TI.
Section 175.25
    Section 175.25 prescribes the notification that operators must 
provide to passengers regarding restrictions on the types of hazardous 
material they may or may not carry aboard an aircraft on their person 
or in checked or carry-on baggage. Consistent with revisions to the 
ICAO TI, in this NPRM, PHMSA is proposing to revise paragraph (b) as 
follows: (1) For all ticket purchases, clarify that the hazardous 
materials notification must be presented at the point of ticket 
purchase, or if this is not practical, made available to passengers in 
another manner prior to the check-in process and; (2) for such internet 
purchases, require that the final ticket purchase cannot be completed 
until the passenger or a person acting on the passenger's behalf has 
been presented with this information, in addition to the existing 
requirement to indicate that they understand the restrictions on 
hazardous materials in baggage. In this NPRM, PHMSA is proposing to 
revise paragraph (c) as follows: (1) Replace the text ``provided'' with 
``presented'' to make it clear that passengers must see information on 
the types of hazardous material forbidden to be transported before 
proceeding with check-in. It was reported that some operators published 
the required information in areas on a Web site that were not always 
visible to the passenger, believing that this met the requirement of 
being ``provided'' and; (2) require that the check-in process cannot be 
completed until the passenger or a person acting on the passenger's 
behalf has been presented with the hazardous materials information, in 
addition to the existing requirement to indicate that they understand 
the restrictions on hazardous materials in baggage.
    In paragraphs (b) and (c) PHMSA is proposing to remove the present 
effective dates of January 1, 2015 and the word ``phone'' used as an 
example of a ticket purchase or check-in completed remotely. 
Furthermore, PHMSA is proposing to remove the words ``regardless if the 
process is completed remotely (e.g., via the Internet and Phone) or 
when completed at the airport, with or without assistance from another 
person (e.g., automated check in facility)'' in order to bring 
paragraph (b) into full alignment with 7;5.1.1 of the ICAO TI. By 
removing the examples in conjunction with other revisions to paragraph 
(b) it is now clear that passenger notification is required for all 
ticket purchases; however, for assisted ticket purchase transactions 
via the telephone the hazardous material information may be provided to 
the passenger using any suitable method prior to the check-in process 
and passenger acknowledgement is not required. These revisions 
represent full harmonization with the ICAO TI and additional 
flexibility in meeting the passenger notification requirements and, 
therefore, the previous effective date of January 1, 2015 will be 
waived as of publication of the rule.
    In addition, the revision proposed in this NPRM providing 
clarification for ticket purchases made via the telephone, permitting 
the hazardous materials notification to be made available in another 
manner to passengers prior to the check-in process, is consistent with 
a petition for rulemaking (P-1623) filed by COSTHA.
Section 175.30
    Section 175.30 prescribes inspection procedures for operators. 
Paragraph (e)(1) prohibits an overpack from containing a package 
bearing the ``CARGO AIRCRAFT ONLY'' label unless certain conditions are 
met and that the overpack affords clear visibility of and easy access 
to the package contained within. In this NPRM, PHMSA is proposing to 
remove paragraph (e)(1) consistent with revisions made to the ICAO TI 
in which current provisions require accessibility to the overpack when 
loaded aboard an aircraft, not the individual packages contained 
within, making reference to packages redundant. As the loading 
requirements in Sec.  175.75(d)(1) require a package bearing the 
``CARGO AIRCRAFT ONLY'' label to be accessible once loaded on the 
aircraft, but do not require they are visible, the requirements in 
(e)(1) place an unnecessary burden on offerers without any additional 
safety function in the loading process.
    Paragraph (a)(5) states that no person may accept for 
transportation aboard an aircraft shipments of lithium batteries 
described with an alternative written document authorized in Sec.  
173.185(c)(4)(v). The proposed removal of the alternative written 
document from Sec.  173.185(c)(4)(v) necessitates the removal of this 
paragraph.
Section 175.33
    Section 175.33 establishes requirements for shipping papers and for 
the notification of the pilot-in-command when hazardous materials are 
transported by aircraft.
    With the exception of package type, paragraph (a)(1)(i) currently 
requires any additional shipping paper description requirements 
provided in Sec. Sec.  172.202, and 172.203 to be included on the 
notification of the pilot-in-command. Section 172.203(k) requires the 
use of technical names for ``n.o.s.'' and generic descriptions for 
proper shipping names identified by the letter ``G'' in column (1) of 
the Sec.  172.101 Table. In this NPRM, PHMSA is proposing to revise 
paragraph (a)(1)(i) to state that technical names are not required to 
be provided on the notification of pilot-in-command. This clarification 
will align the HMR with changes adopted in the ICAO TI and supports the 
overall goal of harmonization. Harmonization of the notification of 
pilot-in-command requirements ensures consistency across all air 
operators thus reducing impediments in commerce and reducing costs 
associated with training to two different sets of standards. In 
addition, the technical name is not referenced in the Emergency 
Response Guidance for Aircraft Incidents Involving Dangerous Goods (Doc 
9481) or the North American Emergency Response Guidebook (ERG). The 
ICAO panel determined that the technical names provided little benefit 
to safety, particularly during the initial stage of emergency response 
while the number of materials requiring a technical name is on the 
rise, thereby increasing the burden on operators to provide this 
information. In addition, the technical name is not referenced in the 
Emergency Response Guidance for Aircraft Incidents Involving Dangerous 
Goods (Doc 9481) or the North American Emergency Response Guidebook 
(ERG).
    Paragraphs (a)(12) and (c)(5) both mention the alternative written 
document authorized in Sec.  173.185(c)(4)(v). The proposed removal of 
the alternative written document from Sec.  173.185(c)(4)(v) 
necessitates the removal of these paragraphs. Any information required 
to be a part of the notification of the pilot-in-command previously 
under paragraph (a)(12) will be detailed on a shipping paper and be 
included on the notification of the pilot-in-command.
Section 175.630
    Section 175.630 prescribes special requirements for Division 6.1 
(Toxic) and 6.2 (Infectious) materials in the HMT. Consistent with 
revisions to the ICAO TI, in this NPRM, PHMSA is proposing to remove 
paragraph (a) which prescribes segregation requirements for loading 
certain Division 6.1 or Division 6.2 materials in the same compartment 
of an aircraft

[[Page 50766]]

with material marked as or known to be a foodstuff, feed, or any other 
edible material intended for consumption by humans or animals. At the 
time these segregation requirements were initially included in the ICAO 
TI and the HMR, the packing instructions were much less detailed than 
they are at present. The UN Model Regulations do not impose segregation 
requirements for Division 6.2 infectious substances. The segregation 
requirements for infectious substances under the ICAO TI and HMR only 
apply to UN2814 and UN2900 which already require robust triple 
packagings. For Division 6.1, the UN Recommendations allow the 
segregation requirements to be relaxed for substances in Packing Groups 
II and III, provided the competent authority is satisfied that the 
packing and segregation are adequate to prevent contamination. In 
addition, the inspection procedures prescribed in Sec.  175.30 require 
a physical check to ensure that the packagings are free from damage. 
The revisions proposed in this NPRM are consistent with a petition for 
rulemaking (P-1631) filed by UPS, Inc., who voiced strong support for 
such action.
Section 175.705
    Section 175.705 prescribes requirements for aircraft that have been 
contaminated with radioactive material and the procedures that must be 
followed prior to returning the aircraft to service. Consistent with 
revisions to the ICAO TI, in this NPRM, PHMSA is proposing to revise 
paragraph (c) by stating that the dose rate at every accessible surface 
``must not exceed'' 0.005 mSv per hour, where it presently states ``is 
less than''.

Part 176

Section 176.80
    Section 176.80 details segregation requirements in addition to any 
segregation requirements set forth elsewhere in subchapter C. In this 
NPRM PHMSA is proposing a prohibition on stowing goods of Division 1.4, 
compatibility group S in the same compartment or hold, or cargo 
transport unit with hazardous materials of Class 1 of compatibility 
groups A and L. Limited quantity shipments are currently excepted from 
segregation requirements for vessel transport by both the IMDG Code and 
the HMR. The IMO noted that when creating this exception a long 
standing prohibition on stowing limited quantity goods of division 1.4, 
compatibility group S in the same compartment or hold, or cargo 
transport unit with hazardous materials of Class 1 of compatibility 
groups A and L was not carried over into amendment 36-12 of the IMDG 
Code. Amendment 37-14 of the IMDG Code reinstates these segregation 
provisions, and PHMSA is proposing an equivalent change.
Section 176.83
    Section 176.83 details segregation requirements for hazardous 
materials vessel transport. Paragraph (b) includes a table for users to 
determine segregation requirements between various Classes (Divisions) 
of hazardous materials. In this NPRM, PHMSA proposes to amend the 
segregation requirements for vessel transportation between hazardous 
materials of Class 4.3 (dangerous when wet) and Class 2.1 (flammable 
gas), and Class 3 (flammable liquid). Proposed changes in the 
segregation table in paragraph (b) are to change the segregation 
requirements between goods of Class 4.3 and Class 2.1 from an ``x'' 
(segregation, if any, is shown in the Sec.  172.101 table) to a ``2'' 
(separated from), and between goods of Class 4.3 and Class 3 from a 
``1'' (away from) to a ``2'' (separated from). The meaning of these 
terms differs depending on the method of transport onboard a vessel 
(shipping break-bulk cargo versus segregation of cargo transport units 
on board container vessels). PHMSA assumes the majority of commodities 
transported by vessel that will be affected by the proposed changes, 
are offered in closed cargo transport units (CTU). A description of the 
proposed changes, and how they will be impact these CTUs, is outlined 
in the following table.

------------------------------------------------------------------------
  Hazard classes and transport          Current            Proposed
              unit                    segregation         segregation
------------------------------------------------------------------------
Class 4.3 versus Class 2.1 CTU..  Vertical--Segregat  Vertical--Not in
                                   ion if any, is      the same vertical
                                   shown in the Sec.   line unless
                                     172.101 table.    segregated by a
                                  Horizontal fore      deck.
                                   and aft both on    Horizontal fore
                                   and under deck--    and aft both on
                                   Segregation if      and under deck--
                                   any, is shown in    One container
                                   the Sec.            space.
                                   172.101 table.     Horizontal
                                  Horizontal           athwartships--One
                                   athwartships--Seg   container space.
                                   regation if any,
                                   is shown in the
                                   Sec.   172.101
                                   table.
Class 4.3 versus Class 3 CTU....  Vertical--One on    Vertical--Not in
                                   top of the other    the same vertical
                                   permitted.          line unless
                                  Horizontal fore      segregated by a
                                   and aft both on     deck.
                                   and under deck--   Horizontal fore
                                   No restriction.     and aft on deck--
                                  Horizontal           One container
                                   athwartships--No    space.
                                   restriction.       Horizontal fore
                                                       and aft under
                                                       deck--One
                                                       container space
                                                       or one bulkhead.
                                                      Horizontal
                                                       athwartships--One
                                                       container space.
------------------------------------------------------------------------

    The proposed changes are based on amendments adopted by the IMO and 
are aimed at enhancing efforts to prevent the spread of fire in an 
emergency situation. Fire extinguishing methods available to vessel 
crews are often quite limited. Due to these limited fire extinguishing 
options, the only recommended option to control the consequences of a 
fire originating from these goods is to let the fire burn and to 
prevent the spread of fire to other cargo or equipment which is crucial 
for the safe operation of the ship. The proposed changes are intended 
to address situations where a fire originates in a shipment of 
flammable liquids or gases and is likely to spread to goods which 
cannot be extinguished, or when a fire originates in goods which cannot 
be extinguished and threatens to spread to highly flammable goods. The 
new proposed segregation distances will enhance efforts to control the 
emergency situation.
Section 176.84
    Section 176.84 prescribes the meanings and requirements for 
numbered or alpha-numeric stowage provisions for vessel shipments 
listed in column 10B of the Sec.  172.101 Hazardous Materials Table. 
The provisions in Sec.  176.84 are broken down into general stowage 
provisions whose meanings are

[[Page 50767]]

defined in the ``table of provisions'' in paragraph (b), and the 
stowage provisions applicable to vessel shipments of Class 1 
explosives, which are defined in the table to paragraph (c)(2).
    In this NPRM, PHMSA is proposing to amend the title of the section 
to note that the codes in column 10B address not only codes for stowage 
requirements, but also handling requirements that need to be observed 
during loading of the hazardous materials. PHMSA is also proposing to 
create footnote 3 and assign it to stowage provision 12 and 13. 
Footnote 3 is added to note that these provisions apply not only to 
stowage of the cargo transport unit, but also to the loading of 
hazardous materials into the cargo transport unit.
    PHMSA is additionally proposing to create new stowage provisions 
147 and 148 consistent with changes adopted in Amendment 37-14 of the 
IMDG Code. Stowage provision 147 is proposed to read ``Stow ``separated 
from'' flammable gases and flammable liquids.'' Stowage provision 148 
is proposed to read ``In addition: From flammable gases and flammable 
liquids when stowed on deck of a containership a minimum distance of 
two container spaces athwartship shall be maintained, when stowed on 
ro-ro ships a distance of 6 m athwartship shall be maintained.''
Section 176.905
    Section 176.905 prescribes specific requirements for motor vehicles 
or mechanical equipment powered by internal combustion engines that are 
offered for transportation and transported by vessel. In this NPRM 
PHMSA is proposing to align our exceptions for vessel transportation 
for motor vehicles and mechanical equipment powered by internal 
combustion engines with those recently adopted by the IMO. PHMSA 
believes aligning these exceptions will enhance the safe vessel 
transport of motor vehicles and mechanical equipment powered by 
internal combustion engines.
    PHMSA is proposing to amend paragraphs (i)(1), (i)(2), (i)(4), and 
(i)(5) to require as a condition of exception from the subchapter that 
batteries installed in motor vehicles or mechanical equipment powered 
by internal combustion engines be protected from short circuit. PHMSA 
is also proposing to revise paragraph (i)(2), which provides conditions 
that need to be met for vehicles or mechanical equipment with an 
internal combustion engine that uses liquid fuel with a flashpoint of 
38 [deg]C (100[emsp14][deg]F) or higher. Currently up to 418 L (110 
gallons) may remain in the equipment or vehicle, and if other noted 
conditions are met the vehicle is excepted from all other requirements 
of subchapter C. PHMSA is proposing to amend this fuel threshold to 450 
L (119 gallons).
    PHMSA is proposing to add paragraph (i)(6) to add exceptions for 
fuel cell powered vehicles or mechanical equipment with an internal 
combustion engine powered by fuel cells. When the engine is protected 
from inadvertent operation by closing fuel supply lines or by other 
means, and the fuel supply reservoir has been drained and sealed, the 
vehicle or mechanical equipment is excepted from the requirements of 
subchapter C.

Part 178

Section 178.71
    Consistent with the UN Model Regulations, in this NPRM, PHMSA is 
proposing to revise paragraph (a) to clarify that UN pressure 
receptacles and service equipment constructed according to the 
standards applicable at the date of manufacture may continue in use 
subject to the continuing qualification and maintenance provisions of 
part 180 of the subchapter.
    Consistent with the UN Model Regulations PHMSA is proposing to 
revise paragraphs (d)(2), (g), and (k) to reflect the adoption of the 
latest ISO standards for the design, construction, and testing of gas 
cylinders and their associated service equipment. These paragraphs also 
contain proposed end dates when the manufacture of cylinders and 
service equipment are no longer authorized to be manufactured in 
accordance with the outdated ISO standard.
    Consistent with the UN Model Regulations PHMSA is proposing a new 
paragraph (n) and the redesignation of the existing paragraphs (n) 
through (s). The proposed new paragraph (n) adopts design and 
construction requirements of UN cylinders for the transportation of 
adsorbed gases, consistent with those adopted into the UN Model 
Regulations.
    Consistent with the UN Model Regulations, PHMSA is proposing to 
revise the proposed redesignated paragraph (o) to adopt the current ISO 
standards relating to material compatibility.
    Finally, PHMSA is proposing to add new paragraphs (u) and (v) to 
adopt the marking requirements for bundles of cylinders that have been 
adopted in the UN Model regulations.
Section 178.75
    Consistent with the UN Model Regulations PHMSA is proposing to 
revise paragraph (d)(3) to reflect the adoption of the latest ISO 
standards for the design, construction, and testing of gas cylinders 
that are part of MEGCs. This paragraph also contains proposed end dates 
when the manufacture of cylinders that are part of MEGCs are no longer 
authorized to be manufactured in accordance with the outdated ISO 
standard.
Section 178.703
    To promote the uniformity of markings, throughout the international 
transportation community, revisions have been adopted in the UN Model 
Regulations to clarify and standardize the specifications for markings, 
including the marking of IBCs. In this NPRM, PHMSA is proposing to 
revise the specifications for the markings prescribed in Sec.  
178.703(b)(7)(iii) to be consistent with the revised specifications for 
these markings in the UN Model Regulations. Also consistent with the UN 
Model Regulations, a transitional period is being proposed to authorize 
markings in conformance with the requirements of this paragraph in 
effect on October 1, 2012, to continue to be applied to all IBCs 
manufactured, repaired or remanufactured between January 1, 2011 and 
December 31, 2016.
Section 178.910
    In this NPRM, PHMSA is proposing to revise paragraph (a) relating 
to the marking of large packagings to include markings for the proposed 
large salvage packagings. Consistent with the UN Model Regulations, 
following the large packaging design type identification code on a 
large packaging. a large salvage packaging conforming to the 
requirements of subpart P of part 178 is proposed to be marked with the 
letter ``T''.
    In addition, to promote the uniformity of markings, throughout the 
international transportation community, revisions have been adopted in 
the UN Model Regulations to clarify and standardize the specifications 
for markings, including the marking of large packagings and large 
salvage packaging. In this NPRM, PHMSA is proposing to revise the 
specifications for the markings prescribed in Sec.  178.910(b) to be 
consistent with the revised specifications for these markings in the UN 
Model Regulations. Also consistent with the UN Model Regulations, a 
transitional period is being proposed to authorize markings in 
conformance with the requirements of this paragraph in effect on 
October 1, 2012, to continue to be applied to all large packagings 
manufactured, repaired or

[[Page 50768]]

remanufactured between January 1, 2015 and December 31, 2016.

Part 180

Section 180.207
    Requirements for requalification of UN pressure receptacles are 
prescribed in Sec.  180.207. Table 1 in paragraph (c) of Sec.  180.207 
provides requalification intervals for UN pressure vessels. In this 
NPRM, PHMSA is proposing to add an additional entry to the end of Table 
1 to prescribe a requalification interval of 5 years for pressure 
receptacles used for adsorbed gases. This requalification period is 
consistent with the requalification period adopted in the UN Model 
Regulations for the use of these cylinders. Section 173.302c relating 
to authorization for the use of cylinders for adsorbed gases directs 
the reader to this section for the requalification period for these 
cylinders.
    The proposed paragraph (d)(5) provides that each UN cylinder used 
for adsorbed gases must be inspected and tested in accordance with 
Sec.  173.302c and ISO 11513:2011. Both Sec.  173.302c and ISO 
11513:2011 are being proposed for adoption in this NPRM.

VI. Regulatory Analyses and Notices

A. Statutory/Legal Authority for This Rulemaking

    This proposed rule is published under the following statutory 
authorities:
    1. 49 U.S.C. 5103(b) authorizes the Secretary of Transportation to 
prescribe regulations for the safe transportation, including security, 
of hazardous materials in intrastate, interstate, and foreign commerce. 
This proposed rule amends regulations to maintain alignment with 
international standards by incorporating various amendments, including 
changes to proper shipping names, hazard classes, packing groups, 
special provisions, packaging authorizations, air transport quantity 
limitations and vessel stowage requirements. To this end, the proposed 
rule amends the HMR to more fully align with the biennial updates of 
the UN Model Regulations, the IMDG Code and the ICAO TI.
    Harmonization serves to facilitate international commerce; at the 
same time, harmonization promotes the safety of people, property, and 
the environment by reducing the potential for confusion and 
misunderstanding that could result if shippers and transporters were 
required to comply with two or more conflicting sets of regulatory 
requirements. While the intent of this rulemaking is to align the HMR 
with international standards, we review and consider each amendment on 
its own merit based on its overall impact on transportation safety and 
the economic implications associated with its adoption into the HMR. 
Our goal is to harmonize without sacrificing the current HMR level of 
safety and without imposing undue burdens on the regulated community. 
Thus, as explained in the corresponding sections above, we are not 
proposing harmonization with certain specific provisions of the UN 
Model Regulations, the IMDG Code, and the ICAO TI. Moreover, we are 
maintaining a number of current exceptions for domestic transportation 
that should minimize the compliance burden on the regulated community. 
Additionally, the following external agencies were consulted in the 
development of this rule:

U.S. Coast Guard
U.S. Department of Energy
U.S. Department of Interior

    2. 49 U.S.C. 5120(b) authorizes the Secretary of Transportation to 
ensure that, to the extent practicable, regulations governing the 
transportation of hazardous materials in commerce are consistent with 
standards adopted by international authorities. This rule proposes to 
amend the HMR to maintain alignment with international standards by 
incorporating various amendments to facilitate the transport of 
hazardous material in international commerce. To this end, as discussed 
in detail above, PHMSA proposes to incorporate changes into the HMR 
based on the 18th Revised Edition of the UN Model Regulations, 
Amendment 37-14 to the IMDG Code, and the 2015-2016 Edition of the ICAO 
TI, which become effective January 1, 2015. The large volume of 
hazardous materials transported in international commerce warrants the 
harmonization of domestic and international requirements to the 
greatest extent possible.

B. Executive Orders 12866 and 13563 and DOT Regulatory Policies and 
Procedures

    This notice is not considered a significant regulatory action under 
section 3(f) of Executive Order 12866 (``Regulatory Planning and 
Review'') and, therefore, was not reviewed by the Office of Management 
and Budget. This notice is not considered a significant rule under the 
Regulatory Policies and Procedures of the Department of Transportation 
(44 FR 11034). Additionally, E.O. 13563 (``Improving Regulation and 
Regulatory Review'') supplements and reaffirms E.O. 12866, stressing 
that, to the extent permitted by law, an agency rulemaking action must 
be based on benefits that justify its costs, impose the least burden, 
consider cumulative burdens, maximize benefits, use performance 
objectives, and assess available alternatives.
Benefits To Harmonization
    In an earlier regulatory evaluation,\1\ we estimated a proxy for 
benefits of harmonization of the HMR with international standards of 
$62 million. More specifically, this $62 million was estimated by 
multiplying a hazard communication cost per dollar of hazardous 
materials output--$0.001--by the value of hazardous materials involved 
in international trade, as estimated by the proportion of trade (the 
total of gross imports and gross exports) in the fuels and lubricants, 
chemicals, and medicinal/dental/pharmaceutical products industries 
($498 billion in 2010) \2\ that are hazardous products (i.e., 12.4 
percent).\3\ \4\
---------------------------------------------------------------------------

    \1\ HM-215L: Hazardous Materials: Harmonization with 
International Standards (RRR), Final Rule, Section V.B., 78 FR 1023 
et seq., January 7, 2013.
    \2\ As reported in the quarterly trade data of the U.S. Bureau 
of Economic Analysis, available at: http://www.bea.gov/international/detailed_trade_data.htm.
    \3\ U.S. Census Bureau's 2007 Commodity Flow Survey, Table 10.
    \4\ See Section V.B. for more detailed calculations of these 
figures.
---------------------------------------------------------------------------

    For estimating benefits of this Amendment 1, we follow a nearly 
identical approach (acknowledging there is an inherent imprecision of 
benefits here), updating data and assumptions where possible. 2012 
Commodity Flow Survey data on hazardous materials are not yet available 
as of the date of this regulatory evaluation.
    However, the 12.4 percent proportion (of total shipment values 
classed as hazardous materials) estimated in the earlier regulatory 
evaluation may have had a high-side bias due to the variety of 
different classes of products classified as hazardous. In actuality, 
the percentage of shipments properly classified as hazardous is likely 
lower, particularly for medicinal/dental/pharmaceuticals. Here, we 
assume a slightly lower proportion to arrive at an estimate of benefits 
of 10 percent.
    We update our estimate of value of hazardous materials involved in 
international trade by using U.S. Trade in Goods seasonally adjusted, 
Census-based total gross imports and gross exports in the fuels and 
lubricants, chemicals, and medicinal/dental/pharmaceutical products 
industries for the fourth quarter of 2013, the most recent quarter 
available--

[[Page 50769]]

     Gross imports: $134 billion (rounded)
    [cir] Fuels and lubricants: $94.744 billion
    [cir] Chemicals: $18.637 billion
    [cir] Medicinal/dental/pharmaceutical products: $20.613 billion
     Gross exports: $85.8 billion (rounded)
    [cir] Fuels and lubricants: $44.301 billion
    [cir] Chemicals: $30.089 billion
    [cir] Medicinal/dental/pharmaceutical products: $11.416 billion
     Gross imports plus gross exports: $219.8 billion \5\
---------------------------------------------------------------------------

    \5\ Bureau of Economic Analysis, U.S. Department of Commerce, 
U.S. Trade in Goods (IDS-0008), available at: http://www.bea.gov/international/detailed_trade_data.htm.
---------------------------------------------------------------------------

    Multiplying the quarterly estimate of $219.8 billion by 4 gives an 
annual estimate of gross imports plus gross exports in the three 
industries of $879.2 billion. Multiplying this figure by 10 percent 
(the estimated proportion of annual trade in these three industries 
that are hazardous products) by the average hazard communication cost 
per dollar of hazardous materials produced in the United States 
($0.001) results in an estimate of benefits from Amendment 1 of $87.9 
million (rounded) annually.
    If U.S. regulations are not harmonized with international 
standards, we estimate that it will cost U.S. companies an additional 
$87.9 million per year to comply with both the HMR and the 
international standards. Harmonizing the HMR with the international 
standards, however, will avert these $87.9 million in additional costs, 
and these averted costs are therefore considered the primary benefit 
attributable to this rulemaking.
    Costs of Harmonization. The primary cost of updating references in 
the U.S. HMR (to incorporate the most recent international hazardous 
material standards) is the purchase of updated copies of the 
international standards being incorporated by reference in the HMR. 
These costs will be borne by offerors and transporters of hazmat if 
this rulemaking were finalized.
    It is unknown how many individuals and firms involved in shipping 
hazmat will purchase copies of these international standards as a 
result of finalizing this rulemaking. We take a conservative approach 
to estimating such a figure by using as a proxy the number of shippers, 
carriers, or other offerors or transporters of hazmat in commerce with 
a PHMSA registration expiring in 2014. Currently, PHMSA's registration 
database indicates 36,731 registrants as of May 20, 2014.\6\ Of these, 
29,877 (approximately 81 percent) are small businesses as defined by 
the U.S. Small Business Administration. Further, 31,598 registrants 
(approximately 86 percent) indicated that they offer or transport 
hazmat solely by highway method.
---------------------------------------------------------------------------

    \6\ See PHMSA Hazardous Materials Registration Program 
Registration Data Files, link available at http://www.phmsa.dot.gov/hazmat/registration, accessed on May 20, 2014.
---------------------------------------------------------------------------

    If we assume (for conservative estimation purposes) that all 
registrants will purchase copies of all publications, this indicates an 
estimated cost of this amendment of $56.68 million (rounded, $1,543 
cost of all publications * 36,731 registrants). (In reality, all of the 
ISO standards incorporated will not be purchased by the majority of 
shippers and carriers, and will likely only impact a small subset of 
the regulated community. Further, it is likely that many companies will 
purchase multiple copies of the IMDG Code and ICAO TI, rather than only 
one copy. We do not believe we have sufficient data to estimate the 
precise number of registrants. However, we use one copy per registrant 
as a reasonably conservative estimate on costs of the proposed 
rulemaking.)
    However, further assuming that those who indicated that they offer 
or transport in commerce hazmat only via highway, two publications 
included in the $1,543 cost will not apply to such registrants (ICAO TI 
[for air] and IMDG Code [by vessel]). Therefore, costs for the 31,598 
highway-only registrants would total $32.99 million ($1,543--$155 [ICAO 
TI]--$344 [IMDG Code] * 31,598 highway-only registrants). 
Conservatively (i.e., overestimating costs and underestimating 
benefits) assuming all other registrants (while acknowledging that, in 
fact, some will purchase all standards copies and some will purchase 
none) will purchase updated copies of all standards publications listed 
here indicates a total cost of this Amendment 1 of $40.91 million, 
incurred once ($32.99 million + $1,543 * [36,731 total registrants--
31,598 highway-only registrants], rounded).
    Net Benefit. Based on the discussions of benefits and costs 
provided above, the estimated net benefit associated with the 
international harmonization final rule (2137-AF05) is $47 million in 
the first year after publication and $87.9 million in the second year 
after publication. Please see the complete regulatory analysis, a copy 
of which has been placed in the docket for this rulemaking, for a more 
detailed analysis of the costs and benefits of this proposed rule.

C. Executive Order 13132

    This proposed rule has been analyzed in accordance with the 
principles and criteria contained in Executive Order 13132 
(``Federalism''). This proposed rule preempts State, local, and Indian 
tribe requirements but does not propose any regulation that has 
substantial direct effects on the States, the relationship between the 
national government and the States, or the distribution of power and 
responsibilities among the various levels of government. Therefore, the 
consultation and funding requirements of Executive Order 13132 do not 
apply.
    The Federal hazardous material transportation law, 49 U.S.C. 5101-
5128, contains an express preemption provision (49 U.S.C. 5125(b)) that 
preempts State, local, and Indian tribe requirements on certain covered 
subjects, as follows:
     The designation, description, and classification of 
hazardous material;
     The packing, repacking, handling, labeling, marking, and 
placarding of hazardous material;
     The preparation, execution, and use of shipping documents 
related to hazardous material and requirements related to the number, 
contents, and placement of those documents;
     The written notification, recording, and reporting of the 
unintentional release in transportation of hazardous material; and
     The design, manufacture, fabrication, inspection, marking, 
maintenance, recondition, repair, or testing of a packaging or 
container represented, marked, certified, or sold as qualified for use 
in transporting hazardous material in commerce.
    This proposed rule addresses the covered subject items above and 
preempts State, local, and Indian tribe requirements not meeting the 
``substantively the same'' standard. This proposed rule is necessary to 
incorporate changes adopted in international standards, effective 
January 1, 2015. If the changes in this proposed rule are not adopted 
in the HMR, U.S. companies, including numerous small entities competing 
in foreign markets, would be at an economic disadvantage. These 
companies would be forced to comply with a dual system of regulations. 
The changes in this proposed rulemaking are intended to avoid this 
result. Federal hazardous materials transportation law provides at 49 
U.S.C. 5125(b)(2) that, if DOT issues a regulation concerning any of 
the covered subjects, DOT must

[[Page 50770]]

determine and publish in the Federal Register the effective date of 
Federal preemption. The effective date may not be earlier than the 90th 
day following the date of issuance of the final rule and not later than 
two years after the date of issuance. PHMSA proposes the effective date 
of Federal preemption be 90 days from publication of a final rule in 
this matter.

D. Executive Order 13175

    This proposed rule was analyzed in accordance with the principles 
and criteria contained in Executive Order 13175 (``Consultation and 
Coordination with Indian Tribal Governments''). Because this proposed 
rule does not have tribal implications, does not impose substantial 
direct compliance costs, and is required by statute, the funding and 
consultation requirements of Executive Order 13175 do not apply.

E. Regulatory Flexibility Act, Executive Order 13272, and DOT 
Procedures and Policies

    The Regulatory Flexibility Act (5 U.S.C. 601 et seq.) requires an 
agency to review regulations to assess their impact on small entities, 
unless the agency determines that a rule is not expected to have a 
significant impact on a substantial number of small entities. This 
proposed rule facilitates the transportation of hazardous materials in 
international commerce by providing consistency with international 
standards. This proposed rule applies to offerors and carriers of 
hazardous materials, some of whom are small entities, such as chemical 
manufacturers, users and suppliers, packaging manufacturers, 
distributors, and training companies. As discussed above, under 
Executive Order 12866, the majority of amendments in this proposed rule 
should result in cost savings and ease the regulatory compliance burden 
for shippers engaged in domestic and international commerce, including 
trans-border shipments within North America.
    Many companies will realize economic benefits as a result of these 
amendments. Additionally, the changes effected by this NPRM will 
relieve U.S. companies, including small entities competing in foreign 
markets, from the burden of complying with a dual system of 
regulations. Therefore, we certify that these amendments will not, if 
promulgated, have a significant economic impact on a substantial number 
of small entities.
    This proposed rule has been developed in accordance with Executive 
Order 13272 (``Proper Consideration of Small Entities in Agency 
Rulemaking'') and DOT's procedures and policies to promote compliance 
with the Regulatory Flexibility Act to ensure that potential impacts of 
draft rules on small entities are properly considered.

F. Paperwork Reduction Act

    PHMSA currently has approved information collection under Office of 
Management and Budget (OMB) Control Number 2137-0034, ``Hazardous 
Materials Shipping Papers and Emergency Response Information.'' We 
anticipate that this proposed rule will result in an increase in the 
annual information collection burden of this information collection due 
to an increase in the number of shipping papers prepared for packages 
containing batteries that exceeds the number or quantity (mass) limits 
in the table shown in Sec.  173.185(c)(4), but containing no more than 
2.5 kg of lithium metal cells or batteries or 10 kg of lithium ion 
cells or batteries per package. Shipments utilizing this allowance 
currently provide alternative documentation containing the name and 
address of the offeror and consignee, the UN number, an indication of 
compliance with this paragraph (c)(4) (or the applicable ICAO Packing 
Instruction), and the number of packages and the gross mass of each 
package.
    This rulemaking identifies a revised information collection that 
PHMSA will submit to OMB for approval based on the requirements in this 
NPRM. PHMSA has developed burden estimates to reflect changes in this 
NPRM, and estimates the information collection and recordkeeping burden 
in this rule are as follows:
    OMB Control Number: 2137-0034.
    Annual Increase in Number of Respondents: 150.
    Annual Increase in Annual Number of Responses: 13,167.
    Annual Increase in Annual Burden Hours: 219.
    Annual Increase in Annual Burden Costs: $4,380.
    Under the Paperwork Reduction Act of 1995, no person is required to 
respond to an information collection unless it has been approved by OMB 
and displays a valid OMB control number. Section 1320.8(d), title 5, 
Code of Federal Regulations requires that PHMSA provide interested 
members of the public and affected agencies an opportunity to comment 
on information and recordkeeping requests. PHMSA specifically requests 
comments on the information collection and recordkeeping burdens 
associated with developing, implementing, and maintaining these 
proposed requirements. Address written comments to the Dockets Unit as 
identified in the ADDRESSES section of this rulemaking. We must receive 
comments regarding information collection burdens prior to the close of 
the comment period identified in the DATES section of this rulemaking. 
In addition, you may submit comments specifically related to the 
information collection burden to the PHMSA Desk Officer, Office of 
Management and Budget, at fax number 202-395-6974. Requests for a copy 
of this information collection should be directed to Steven Andrews or 
T. Glenn Foster, Standards and Rulemaking Division (PHH-10), Pipeline 
and Hazardous Materials Safety Administration, 1200 New Jersey Avenue 
SE., Washington, DC 20590-0001. If these proposed requirements are 
adopted in a final rule, PHMSA will submit the revised information 
collection and recordkeeping requirements to OMB for approval.

G. Regulation Identifier Number (RIN)

    A regulation identifier number (RIN) is assigned to each regulatory 
action listed in the Unified Agenda of Federal Regulations. The 
Regulatory Information Service Center publishes the Unified Agenda in 
April and October of each year. The RIN contained in the heading of 
this document can be used to cross-reference this action with the 
Unified Agenda.

H. Unfunded Mandates Reform Act

    This proposed rule does not impose unfunded mandates under the 
Unfunded Mandates Reform Act of 1995. It does not result in costs of 
$141.3 million or more, adjusted for inflation, to either State, local, 
or tribal governments, in the aggregate, or to the private sector in 
any one year, and is the least burdensome alternative that achieves the 
objective of the rule.

I. Environmental Assessment

    The National Environmental Policy Act, 42 U.S.C. 4321-4375, 
requires that federal agencies analyze proposed actions to determine 
whether the action will have a significant impact on the human 
environment. The Council on Environmental Quality (CEQ) regulations 
require federal agencies to conduct an environmental review 
considering: (1) The need for the proposed action; (2) alternatives to 
the proposed action; (3) probable environmental impacts of the proposed 
action and alternatives; and (4) the agencies and persons consulted 
during the consideration process. 40 CFR 1508.9(b).

[[Page 50771]]

Description of Action
    Docket No. PHMSA-2013-0260 (HM-215M), NPRM. The transportation of 
hazardous materials in commerce is subject to the HMR, issued under 
authority of Federal hazardous materials transportation law, codified 
at 49 U.S.C. 5001 et seq. To facilitate the safe and efficient 
transportation of hazardous materials in international commerce, the 
HMR provides that both domestic and international shipments of 
hazardous materials may be offered for transportation and transported 
under provisions of the international regulations.
Purpose and Need
    This action is necessary to integrate into the HMR recent changes 
to the International Maritime Dangerous Goods Code (IMDG Code), the 
International Civil Aviation Organization's Technical Instructions for 
the Safe Transport of Dangerous Goods by Air (ICAO TI), and the United 
Nations Recommendations on the Transport of Dangerous Goods--Model 
Regulations (UN Model Regulations) effective January 1, 2015. If the 
changes in this proposed rule are not adopted in the HMR by this 
effective date, US companies, including numerous small entities 
competing in foreign markets, would be at an economic disadvantage. 
These companies would be forced to comply with a dual system of 
transport regulations that could result in shippers and carriers 
segmenting domestic and international operations to accommodate 
differing requirements. The changes to the HMR contained in this 
proposed rulemaking are intended to avoid this result.
    The intended effect of this action is to align the HMR with 
international hazardous material transport standards and requirements 
to the extent practicable in accordance with Federal Hazardous 
Materials transportation law (49 U.S.C. 5210). When considering the 
adoption of international hazardous material standards under the HMR, 
PHMSA reviews and evaluates each amendment on its own merit, on the 
basis of its overall impact on transportation safety, and the economic 
implications associated with its adoption into the HMR. Our goal is to 
harmonize without diminishing the level of safety currently provided by 
the HMR and without imposing undue burdens on the regulated public.
    In this NPRM, PHMSA is proposing to amend the Hazardous Materials 
Regulations to maintain alignment with international standards by 
incorporating various amendments, including changes to proper shipping 
names, hazard classes, packing groups, special provisions, packaging 
authorizations, air transport quantity limitations, and vessel stowage 
requirements. These revisions are necessary to harmonize and align the 
HMR with recent amendments adopted in the UN Model Regulations, IMDG 
Code, and the ICAO TI. The amendments proposed in this notice are 
intended to facilitate the safe and efficient transportation of 
hazardous materials in international commerce, provide clarity to 
encourage and increase regulatory compliance, and improve the efficacy 
of emergency response in the event of a hazardous materials incident.
Alternatives
    In proposing this rulemaking, PHMSA is considering the following 
alternatives:
    No Action Alternative:
    If PHMSA chose this alternative, it would not proceed with any 
rulemaking on this subject and the current regulatory standards would 
remain in effect.
    Preferred Alternative:
    This alternative is the current proposal as it appears in this 
Notice of Proposed Rulemaking (NPRM), applying to the transportation of 
hazardous materials by various transport modes (highway, rail, vessel 
and aircraft). The proposed amendments included in this alternative are 
more fully addressed in the preamble and regulatory text sections of 
this NPRM. However, they generally include: (1) Updates to references 
to various international hazardous materials transport standards; (2) 
Amendments to the hazardous materials table to add, revise, or remove 
certain proper shipping names, packing groups, special provisions, 
packaging authorizations, bulk packaging requirements and vessel 
stowage requirements; (3) Amendments to add and delete various 
substances to the list of marine pollutants in Appendix B to Sec.  
172.101; (4) Changes throughout the Part 173 packaging requirements to 
authorize more flexibility when choosing packages for hazardous 
materials; (5) An exception from the HMR for marine pollutants up to 5 
liters (1.3 gallons) for liquids or 5 kg (11 pounds) for solids when 
these materials are packaged in accordance with the general packaging 
requirements of Sec. Sec.  173.24 and 173.24a; (6) Minimum sizes for 
the OVERPACK and SALVAGE markings; and; (7) Revisions and additions to 
vessel stowage codes listed in column 10B of the HMT and segregation 
requirements in Sec.  176.83 consistent with the IMDG Code.
No Action Alternative
    If PHMSA were to select the No Action Alternative, current 
regulations would remain in place, and no new provisions would be 
added. However, efficiencies gained through harmonization in updates to 
transport standards, lists of regulated substances, definitions, 
packagings, stowage requirements/codes, flexibilities allowed, enhanced 
markings, segregation requirements, etc., would not be realized. 
Foregone efficiencies in the No Action Alternative include freeing up 
limited resources to concentrate on vessel transport hazard 
communication (hazcom) issues of potentially much greater environmental 
impact.
    Additionally, the Preferred Alternative encompasses enhanced and 
clarified regulatory requirements, which would result in increased 
compliance and fewer environmental and safety incidents. Not adopting 
the proposed environmental and safety requirements in the NPRM under 
the No Action Alternative would result in a lost opportunity for 
reducing environmental and safety-related incidents.
    Greenhouse gas emissions would remain the same under the No Action 
Alternative.
Preferred Alternative
    If PHMSA selects the provisions as proposed in this NPRM, we 
believe that safety and environmental risks would be reduced and that 
protections to human health and environmental resources would be 
increased. Potential environmental impacts of each proposed amendment 
in the preferred alternative are discussed below:
    1. Propose updates to references to various international hazardous 
materials transport standards, including the 2015-2016 Edition of the 
ICAO TI; Amendment 37-14 to the IMDG Code; the 18th Revised Edition of 
the UN Model Regulations; Amendment 2 to the 5th revised edition of the 
UN Manual of Tests and Criteria; incorporation by reference of the 
Canadian Transportation of Dangerous Goods Regulations to include 
Amendment 11 (SOR/2011-239) October 27, 2011 and; adding two new 
references standards and update four other references to standards 
applicable to the manufacture, use, and requalification of pressure 
vessels published by the International Organization for 
Standardization:
    The HMR authorize shipments prepared in accordance with the ICAO TI 
and transported by motor vehicle either before or after being 
transported

[[Page 50772]]

by aircraft. Similarly, the HMR authorize shipments prepared in 
accordance with the IMDG Code if all or part of the transportation is 
by vessel. The authorizations to use the ICAO TI and the IMDG code are 
subject to certain conditions and limitations outlined in part 171 
subpart C. PHMSA believes that this proposed amendment, which will 
increase standardization and consistency of regulations, will result in 
greater protection of human health and the environment. Consistency 
between U.S. and international regulations enhances the safety and 
environmental protection of international hazardous materials 
transportation through better understanding of the regulations, an 
increased level of industry compliance, the smooth flow of hazardous 
materials from their points of origin to their points of destination, 
and consistent emergency response in the event of a hazardous materials 
incident.
    Enhanced environmental protection will also be achieved through 
more targeted and effective training. This proposed amendment will 
eliminate inconsistent hazardous materials regulations, which hamper 
compliance training efforts. For ease of compliance with appropriate 
regulations, air and vessel carriers engaged in the transportation of 
hazardous materials generally elect to comply with the ICAO TI and IMDG 
Code as appropriate. By maintaining consistency between these 
international regulations and the HMR, shippers and carriers are able 
to train their hazmat employees in a single set of requirements for 
classification, packaging, hazard communication, handling, stowage, 
etc., thereby minimizing the possibility of improperly preparing and 
transporting a shipment of hazardous materials because of differences 
between domestic and international regulations.
    Greenhouse gas emissions would remain the same under this proposed 
amendment.
    2. Propose amendments to the HMT to add, revise, or remove certain 
proper shipping names, packing groups, special provisions, packaging 
authorizations, bulk packaging requirements and vessel stowage 
requirements:
    PHMSA believes that this proposed amendment, which will increase 
standardization and consistency of regulations, will result in greater 
protection of human health and the environment. Consistency between US 
and international regulations enhances the safety and environmental 
protection of international hazardous materials transportation through 
better understanding of the regulations, an increased level of industry 
compliance, the smooth flow of hazardous materials from their points of 
origin to their points of destination, and consistent emergency 
response in the event of a hazardous materials incident. New and 
revised entries to the HMT reflect emerging technologies, and a need to 
better describe or differentiate between existing entries. These 
proposed changes mirror changes in the Dangerous Goods list of The 18th 
Revised Edition of the UN Model Regulations, the 2015-2016 Edition of 
the ICAO TI and the 37-14 amendments to the IMDG Code. It is extremely 
important for the domestic HMR to mirror the UN Model Regulations, the 
ICAO TI, and the IMDG Code with respect to the entries in the HMT to 
ensure consistent naming conventions across modes and international 
borders.
    Enhanced environmental protection will also be achieved through 
more targeted and effective training. This proposed amendment will 
eliminate inconsistent hazardous materials regulations, which hamper 
compliance training efforts. For ease of compliance with appropriate 
regulations, international carriers engaged in the transportation of 
hazardous materials by vessel generally elect to comply with the IMDG 
Code. By maintaining consistency between these international 
regulations and the HMR, shippers and carriers are able to train their 
hazmat employees in a single set of requirements for classification, 
packaging, hazard communication, handling, stowage, etc., thereby 
minimizing the possibility of improperly preparing and transporting a 
shipment of hazardous materials because of differences between domestic 
and international regulations.
    The packing group assignment reflects a degree of danger associated 
with a particular material and identifies appropriate packaging. 
However, assignment of a packing group is not appropriate in all cases 
(e.g. explosives, gases, radioactive material). In such cases the 
packing group does not indicate a degree of danger and the packaging 
requirements for those materials are specified in the appropriate 
section in part 173. Similarly for articles, the packing group only 
reflects the degree of the danger posed by the hazardous component, but 
may not reflect danger of the article itself, which may be 
substantially reduced or changed when compared to shipping the 
hazardous component alone. Currently and without specific rationale, 
some articles are assigned packing groups while others are not. The 
inconsistent application of packing groups to articles can create 
problems for trainers when trying to explain regulatory structure to 
students. This proposed change provides a level of consistency for all 
articles specifically listed in the HMT, without diminishing 
environmental protection and safety.
    For adsorbed gases, PHMSA proposes adding into the HMR a 
definition, HMT entries, authorized packagings and safety requirements 
including but not limited to quantity limitations and filling limits. 
PHMSA believes that this proposed amendment will result in greater 
protection of human health and the environment by facilitating the safe 
and efficient transport of gases adsorbed onto a porous media within 
cylinders. This technology allows the cylinder to be filled and 
transported with gas at sub-atmospheric pressure. Sub-atmospheric 
transport of gas minimizes potential leaks of gas during 
transportation, thus providing significant safety and environmental 
improvements over traditional high-pressure cylinders. This method of 
transporting gas is a proven safe method authorized through a PHMSA 
special permit for over ten years and recently adopted into the UN 
Model Regulations, the ICAO TI and the IMDG Code.
    Greenhouse gas emissions would remain the same under this proposed 
amendment.
    3. Propose additions and deletions of various substances to/from 
the list of Marine Pollutants in HMR, Appendix B to 172.101:
    As for the above amendments, PHMSA believes that this proposed 
amendment, which will increase standardization and consistency of 
regulations, will result in greater protection of human health and the 
environment. Consistency between US and international regulations 
enhances the safety and environmental protection of international 
hazardous materials transportation through better understanding of the 
regulations, an increased level of industry compliance, the smooth flow 
of hazardous materials from their points of origin to their points of 
destination, and consistent emergency response in the event of a 
hazardous materials incident. The proposed additions and deletions are 
based on the criteria contained in the IMDG code for substances 
classified as toxic to the aquatic environment. The HMR maintain a list 
as the basis for regulating substances toxic to the aquatic environment 
and allow use of the criteria in the IMDG Code if a listed material 
does not meet the criteria for a marine pollutant. PHMSA periodically 
updates its list based on changes to the IMDG code and evaluation of 
listed materials against the IMDG code

[[Page 50773]]

criteria. Amending the marine pollutant list will facilitate consistent 
communication of the presence of marine pollutants and facilitate safe 
and efficient transportation without imposing significant burden 
associated with characterizing mixtures as marine pollutants.
    Also similar to the above amendments, enhanced environmental 
protection will also be achieved through more targeted and effective 
training. This proposed amendment will eliminate inconsistent hazardous 
materials regulations, which hamper compliance training efforts. For 
ease of compliance with appropriate regulations, international carriers 
engaged in the transportation of hazardous materials by vessel 
generally elect to comply with the IMDG Code. By maintaining 
consistency between these international regulations and the HMR, 
shippers and carriers are able to train their hazmat employees in a 
single set of requirements for classification, packaging, hazard 
communication, handling, stowage, etc., thereby minimizing the 
possibility of improperly preparing and transporting a shipment of 
hazardous materials because of differences between domestic and 
international regulations.
    Greenhouse gas emissions would remain the same under this proposed 
amendment.
    4. Propose adopting changes throughout the HMR Part 173 packaging 
requirements to authorize more flexibility when choosing packages for 
hazardous materials:
    The proposed changes would adopt manufacturing and performance 
standards for small gas pressure receptacles without a relief device, 
clarify the use of the HMT entry ``fire extinguisher'', authorize the 
use of large salvage packagings and provide a list of authorized 
packagings for ammonium nitrate emulsions. As for the above amendments, 
PHMSA believes that these proposed amendments, which will increase 
standardization and consistency of regulations, will result in greater 
protection of human health and the environment. Consistency between US 
and international regulations enhances the safety and environmental 
protection of international hazardous materials transportation through 
better understanding of the regulations, an increased level of industry 
compliance, the smooth flow of hazardous materials from their points of 
origin to their points of destination, and consistent emergency 
response in the event of a hazardous materials incident. PHMSA proposes 
to adopt changes throughout the Part 173 packaging requirements to 
authorize more flexibility when choosing packages for hazardous 
materials. This action is consistent with amendments adopted into the 
UN Model Regulations.
    These amendments permit additional flexibility for authorized 
packages without compromising environmental protection or safety. 
Manufacturing and performance standards for small gas pressure 
receptacles ensure a safe packaging that is capable of retaining its 
contents without being overly prescriptive. The proposed clarification 
for fire extinguishers increases the transparency of the regulations, 
which will in turn result in increased compliance, reduced incidents of 
undeclared or mis-declared hazardous material and enhanced 
environmental protection and safety. Increased flexibility will also 
add to environmental protection by increasing the ease of regulatory 
compliance.
    Also similar to the above amendments, enhanced environmental 
protection will be achieved through more targeted and effective 
training. This proposed amendment will eliminate inconsistent hazardous 
materials regulations, which hamper compliance training efforts. By 
maintaining consistency between the UN Model Regulations and the HMR, 
shippers and carriers are able to train their hazmat employees in a 
single set of requirements for classification, packaging, hazard 
communication, handling, stowage, etc., thereby minimizing the 
possibility of improperly preparing and transporting a shipment of 
hazardous materials because of differences between domestic and 
international regulations.
    Greenhouse gas emissions would remain the same under this proposed 
amendment.
    5. Proposed exception from the HMR for marine pollutants up to 5 
liters (1.3 gallons) for liquids or 5 kg (11 lbs.) for solids when 
these materials are packaged in accordance with the general packaging 
requirements of Sec. Sec.  173.24 and 173.24a:
    PHMSA believes that this proposed amendment would provide for a 
slight net increase in environmental protection and safety by reducing 
confusion and simplifying multi-modal transit hazardous material 
transportation requirements. Currently, packages containing less than 5 
liters (1.3 gallons) for liquids or 5 kg (11 lbs.) of material 
containing marine pollutants are subject to additional requirements 
such as shipping papers, Class 9 labelling and UN packaging when 
offered for transport by air or vessel in accordance with the ICAO TI 
or the IMDG Code. However, these same materials would not be subject to 
the HMR when transported by motor vehicle, rail car or aircraft in the 
U.S. The presence of these labels in one mode of transport can cause 
confusion in the U.S. supply chain.
    The proposed amendment would exempt from the HMR small packages of 
hazardous material that are regulated only because of the presence of 
one or more marine pollutants. Materials in these quantities pose a low 
risk in transportation. In addition, these low quantities of materials 
present even lower risks in transportation because they often contain 
low concentrations of marine pollutant constituents. Lastly, risks of 
incidents are very low. In the past 10 years, in tens of thousands of 
vessel shipments, PHMSA's data contains only one record of marine 
pollutant released on a vessel that caused environmental damage. In 
this incident, the material was packaged in a 55-gallon drum and would 
not be impacted by the proposed amendment, since the package would 
still be required to display the marine pollutant mark and the shipping 
documents would still have to communicate the presence of a marine 
pollutant. By reducing the hazard communication (hazcom) burdens for 
lower risk commodities, industry, shippers, and transporters can focus 
hazard communication resources on areas with potentially greater 
environmental and safety consequences.
    The proposed action is consistent with recent revisions to the IMDG 
Code. PHMSA believes that this proposed amendment will increase 
standardization and consistency of regulations, may also result in 
greater protection of human health and the environment. Consistency 
between U.S. and international regulations enhances the safety and 
environmental protection of international hazardous materials 
transportation through better understanding of the regulations, an 
increased level of industry compliance, the smooth flow of hazardous 
materials from their points of origin to their points of destination, 
and consistent emergency response in the event of a hazardous materials 
incident. Excepting these quantities of marine pollutants from the HMR 
will facilitate consistent communication of the presence of marine 
pollutants and facilitate safe and efficient transportation without 
imposing significant burden associated with characterizing mixtures as 
marine pollutants.
    Also similar to the above amendments, enhanced environmental 
protection will also be achieved through

[[Page 50774]]

more targeted and effective training. This proposed amendment will 
eliminate inconsistent hazardous materials regulations, which hamper 
compliance training efforts. For ease of compliance with appropriate 
regulations, international carriers engaged in the transportation of 
hazardous materials by vessel generally elect to comply with the IMDG 
Code. By maintaining consistency between these international 
regulations and the HMR, shippers and carriers are able to train their 
hazmat employees in a single set of requirements for classification, 
packaging, hazard communication, handling, stowage, etc., thereby 
minimizing the possibility of improperly preparing and transporting a 
shipment of hazardous materials because of differences between domestic 
and international regulations.
    Greenhouse gas emissions would remain the same under this proposed 
amendment.
    6. Proposed amendments to add minimum sizes for the OVERPACK and 
SALVAGE markings. These markings would be characters at least 12 mm 
(.47 inches) high:
    PHMSA believes that this proposed amendment, which will provide for 
enhanced hazard communication, will result in greater protection of 
human health and the environment. An overpack is an enclosure to 
provide protection or convenience of handling for one or more packages 
such as pallets and crates. A salvage package is used to contain a 
damaged, leaking or non-conforming package. The HMR require these 
packages to be marked OVERPACK or SALVAGE, as appropriate. This 
communicates the nature of these specialized packaging configurations 
to package handlers and emergency responders. However, because there is 
currently no minimum size requirement for these marks, this information 
is not always readily visible. This proposed amendment would ensure 
that these hazard markings are visible, thus resulting in decreased 
incidents with impacts to the environment and safety.
    Greenhouse gas emissions would remain the same under this proposed 
amendment.
    7. Proposed amendments to revise and add vessel stowage codes 
listed in column 10B of the HMT and segregation requirements in HMR 
Sec.  176.83 consistent with the IMDG Code. These changes are designed 
to harmonize with the IMDG Code and would provide additional guidance 
on the loading and stowage of various materials. Additionally, proposed 
amendments to increase the required segregation distances between 
Division 4.3 dangerous when wet material (i.e. materials liable to give 
off a flammable or toxic gas in contact with water) and Class 3 
flammable liquids and Division 2.1 flammable gases:
    As discussed for previous amendments herein, PHMSA believes that 
this proposed amendment, which will increase standardization and 
consistency of regulations, will result in greater protection of human 
health and the environment. Consistency between U.S. and international 
regulations enhances the safety and environmental protection of 
international hazardous materials transportation through better 
understanding of the regulations, an increased level of industry 
compliance, the smooth flow of hazardous materials from their points of 
origin to their points of destination, and consistent emergency 
response in the event of a hazardous materials incident. New and 
revised entries to the HMT reflect emerging technologies, and a need to 
better describe or differentiate between existing entries. These 
proposed changes mirror the IMDG Code. It is extremely important for 
the domestic HMR and HMT to mirror the IMDG Code to ensure consistent 
naming conventions across modes and international borders.
    Enhanced environmental protection will also be achieved through 
more targeted and effective training. This proposed amendment will 
eliminate inconsistent hazardous materials regulations, which hamper 
compliance training efforts. For ease of compliance with appropriate 
regulations, international carriers engaged in the transportation of 
hazardous materials by vessel generally elect to comply with the IMDG 
Code. By maintaining consistency between these international 
regulations and the HMR, shippers and carriers are able to train their 
hazmat employees in a single set of requirements for classification, 
packaging, hazard communication, handling, stowage, etc., thereby 
minimizing the possibility of improperly preparing and transporting a 
shipment of hazardous materials because of differences between domestic 
and international regulations.
    PHMSA also believes that this group of amendments will increase 
environmental protection and safety through its increased segregation 
distance requirements and enhanced guidance, which will better prevent 
materials from contacting each other and/or water in transportation. 
Increased segregation distances prevent the mixing of incompatible 
material and the subsequent evolution of flammable or toxic gases, 
along with attendant fires and explosions. Together, stowage and 
segregation help manage the risks associated with the transport of 
hazardous materials by water. While the risk associated with the 
transport of these materials is relatively low, these measures would 
further reduce that risk and prevent the spread of a fire between 
flammable materials and materials that react dangerously with water.
    Greenhouse gas emissions would remain the same under this proposed 
amendment.
    Agencies Consulted:
    This NPRM represents PHMSA's first action in the U.S. for this 
program area. PHMSA has coordinated with the U.S. Federal Aviation 
Administration and the U.S. Coast Guard, in the development of this 
proposed rule. PHMSA will consider the views expressed in comments to 
the NPRM submitted by members of the public, state and local 
governments, and industry.
    Conclusion:
    The provisions of this proposed rule build on current regulatory 
requirements to enhance the transportation safety and security of 
shipments of hazardous materials transported by highway, rail, aircraft 
and vessel, thereby reducing the risks of an accidental or intentional 
release of hazardous materials and consequent environmental damage. 
PHMSA believes the net environmental impact will be positive. PHMSA 
believes that there are no significant environmental impacts associated 
with this proposed rule.
    PHMSA welcomes any views, data, or information related to 
environmental impacts that may result if the proposed requirements are 
adopted, as well as possible alternatives and their environmental 
impacts.

J. Privacy Act

    Anyone is able to search the electronic form of any written 
communications and comments received into any of our dockets by the 
name of the individual submitting the document (or signing the 
document, if submitted on behalf of an association, business, labor 
union, etc.). You may review DOT's complete Privacy Act Statement in 
the Federal Register published on April 11, 2000 (65 FR 19477) or you 
may visit http://www.dot.gov/privacy.html.

K. Executive Order 13609 and International Trade Analysis

    Under E.O. 13609, agencies must consider whether the impacts 
associated with significant variations between

[[Page 50775]]

domestic and international regulatory approaches are unnecessary or may 
impair the ability of American business to export and compete 
internationally. In meeting shared challenges involving health, safety, 
labor, security, environmental, and other issues, international 
regulatory cooperation can identify approaches that are at least as 
protective as those that are or would be adopted in the absence of such 
cooperation. International regulatory cooperation can also reduce, 
eliminate, or prevent unnecessary differences in regulatory 
requirements.
    Similarly, the Trade Agreements Act of 1979 (Pub. L. 96-39), as 
amended by the Uruguay Round Agreements Act (Pub. L. 103-465), 
prohibits Federal agencies from establishing any standards or engaging 
in related activities that create unnecessary obstacles to the foreign 
commerce of the United States. For purposes of these requirements, 
Federal agencies may participate in the establishment of international 
standards, so long as the standards have a legitimate domestic 
objective, such as providing for safety, and do not operate to exclude 
imports that meet this objective. The statute also requires 
consideration of international standards and, where appropriate, that 
they be the basis for U.S. standards.
    PHMSA participates in the establishment of international standards 
to protect the safety of the American public, and we have assessed the 
effects of the proposed rule to ensure that it does not cause 
unnecessary obstacles to foreign trade. In fact, the rule is designed 
to facilitate international trade. Accordingly, this rulemaking is 
consistent with E.O. 13609 and PHMSA's obligations under the Trade 
Agreement Act, as amended.

List of Subjects

49 CFR Part 171

    Exports, Hazardous materials transportation, Hazardous waste, 
Imports, Incorporation by reference, Reporting and recordkeeping 
requirements.

49 CFR Part 172

    Education, Hazardous materials transportation, Hazardous waste, 
Incorporation by reference, Labeling, Markings, Packaging and 
containers, Reporting and recordkeeping requirements.

49 CFR Part 173

    Hazardous materials transportation, Incorporation by reference, 
Packaging and containers, Radioactive materials, Reporting and 
recordkeeping requirements, Uranium.

49 CFR Part 175

    Air carriers, Hazardous materials transportation, Radioactive 
materials, Reporting and recordkeeping requirements.

49 CFR Part 176

    Maritime carriers, Hazardous materials transportation, 
Incorporation by reference, Radioactive materials, Reporting and 
recordkeeping requirements.

49 CFR Part 178

    Hazardous materials transportation, Incorporation by reference, 
Motor vehicle safety, Packaging and containers, Reporting and 
recordkeeping requirements.

49 CFR Part 180

    Hazardous materials transportation, Motor carriers, Motor vehicle 
safety, Packaging and containers, Railroad safety, Reporting and 
recordkeeping requirements.

    In consideration of the foregoing, PHMSA proposes to amend 49 CFR 
Chapter I as follows:

PART 171--GENERAL INFORMATION, REGULATIONS, AND DEFINITIONS

0
1. The authority citation for part 171 continues to read as follows:

    Authority: 49 U.S.C. 5101-5128, 44701; Pub. L. 101-410 section 4 
(28 U.S.C. 2461 note); Pub. L. 104-134, section 31001; 49 CFR 1.81 
and 1.97.

0
2. In Sec.  171.4, paragraph (c) is revised to read as follows:


Sec.  171.4  Marine pollutants.

* * * * *
    (c) Exceptions. (1) Except when all or part of the transportation 
is by vessel, the requirements of this subchapter specific to marine 
pollutants do not apply to non-bulk packagings transported by motor 
vehicle, rail car or aircraft.
    (2) Single or combination packagings containing a net quantity per 
single or inner packaging of 5 L or less for liquids or having a net 
mass of 5 kg or less for solids, are not subject to any other 
requirements of this subchapter provided the packagings meet the 
general requirements in Sec. Sec.  173.24 and 173.24a. This exception 
does not apply to marine pollutants that are a hazardous waste, a 
hazardous substance, or meet the definition for inclusion in another 
hazard class.
* * * * *
0
3. In Sec.  171.7:
0
a. Paragraphs (a)(1), (s)(1), (t)(1), (v)(2), and (w)(1) through (52) 
are revised;
0
b. Paragraphs (w)(53 through (58) and (bb)(1)(ix) through (xii) are 
added;
0
c. Paragraph (dd)(1) and paragraph (dd)(2) introductory text are 
revised; and
0
d. Paragraph (dd)(2)(iii) is added.
    The revisions and additions read as follows:


Sec.  171.7  Reference material.

    (a) Matter incorporated by reference--(1) General. There is 
incorporated, by reference in parts 170-189 of this subchapter, matter 
referred to that is not specifically set forth. This matter is hereby 
made a part of the regulations in parts 170-189 of this subchapter. The 
matter subject to change is incorporated only as it is in effect on the 
date of issuance of the regulation referring to that matter. The 
material listed in paragraphs (b) through (ee) of this section have 
been approved for incorporation by reference by the Director of the 
Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. 
Material is incorporated as it exists on the date of the approval and a 
notice of any change in the material will be published in the Federal 
Register. Matters referenced by footnote are included as part of the 
regulations of this subchapter.
* * * * *
    (s) * * *
    (1) IAEA Safety Standards for Protecting People and the 
Environment; Regulations for the Safe Transport of Radioactive 
Material, No. SSR-6, (IAEA Regulations), 2012 Edition, into Sec. Sec.  
171.22, 171.23, 171.26, 173.415, 173.416, 173.417, 173.473.
* * * * *
    (t) * * *
    (1) Technical Instructions for the Safe Transport of Dangerous 
Goods by Air (ICAO Technical Instructions), 2015-2016 Edition, into 
Sec. Sec.  171.8; 171.22; 171.23; 171.24; 172.101; 172.202; 172.401; 
172.512; 172.519; 172.602; 173.56; 173.320; 175.10, 175.33; 178.3.
* * * * *
    (v) * * *
    (2) International Maritime Dangerous Goods Code (IMDG Code), 
Incorporating Amendment 37-14 (English Edition), 2013, into Sec. Sec.  
171.22; 171.23; 171.25; 172.101 172.202; 172.203 172.401; 172.502; 
172.519; 172.602; 173.21; 173.56; 176.2; 176.5; 176.11; 176.27; 176.30; 
176.83; 176.84; 176.140; 176.720; 178.3; 178.274.
    (w) * * *
    (1) ISO 535-1991(E) Paper and board--Determination of water 
absorptiveness--Cobb method, 1991, into Sec.  178.516; 178.707; 
178.708.
    (2) ISO 1496-1: 1990 (E)--Series 1 freight containers--
Specification and

[[Page 50776]]

testing, Part 1: General cargo containers. Fifth Edition, (August 15, 
1990), into Sec.  173.411.
    (3) ISO 1496-3(E)--Series 1 freight containers--Specification and 
testing--Part 3: Tank containers for liquids, gases and pressurized dry 
bulk, Fourth edition, March 1995, into Sec.  178.74; 178.75; 178.274.
    (4) ISO 1516:2002(E), Determination of flash/no flash--Closed cup 
equilibrium method, Third Edition, 2002-03-01, into Sec.  173.120.
    (5) ISO 1523:2002(E), Determination of flash point--Closed cup 
equilibrium method, Third Edition, 2002-03-01, into Sec.  173.120.
    (6) ISO 2431-1984(E) Standard Cup Method, 1984, into Sec.  173.121.
    (7) ISO 2592:2000(E), Determination of flash and fire points--
Cleveland open cup method, Second Edition, 2000-09-15, into Sec.  
173.120.
    (8) ISO 2719:2002(E), Determination of flash point--Pensky-Martens 
closed cup method, Third Edition, 2002-11-15, into Sec.  173.120.
    (9) ISO 2919:1999(E), Radiation Protection--Sealed radioactive 
sources--General requirements and classification, (ISO 2919), second 
edition, February 15, 1999, into Sec.  173.469.
    (10) ISO 3036-1975(E) Board--Determination of puncture resistance, 
1975, into Sec.  178.708.
    (11) ISO 3405:2000(E), Petroleum products--Determination of 
distillation characteristics at atmospheric pressure, Third Edition, 
2000-03-01, into Sec.  173.121.
    (12) ISO 3574-1986(E) Cold-reduced carbon steel sheet of commercial 
and drawing qualities, into Sec.  178.503; Part 178, appendix C.
    (13) ISO 3679:2004(E), Determination of flash point--Rapid 
equilibrium closed cup method, Third Edition, 2004-04-01, into Sec.  
173.120.
    (14) ISO 3680:2004(E), Determination of flash/no flash--Rapid 
equilibrium closed cup method, Fourth Edition, 2004-04-01, into Sec.  
173.120.
    (15) ISO 3807-2(E), Cylinders for acetylene--Basic requirements--
Part 2: Cylinders with fusible plugs, First edition, March 2000, into 
Sec. Sec.  173.303; 178.71.
    (16) ISO 3924:1999(E), Petroleum products--Determination of boiling 
range distribution--Gas chromatography method, Second Edition, 1999-08-
01, into Sec.  173.121.
    (17) ISO 4126-1:2004(E): Safety devices for protection against 
excessive pressure--Part 1: Safety valves, Second edition 2004-02-15, 
into Sec.  178.274.
    (18) ISO 4126-7:2004(E): Safety devices for protection against 
excessive pressure--Part 7: Common data, First Edition 2004-02-15 into 
Sec.  178.274.
    (19) ISO 4126-7:2004/Cor.1:2006(E): Safety devices for protection 
against excessive pressure--Part 7: Common data, Technical Corrigendum 
1, 2006-11-01, into Sec.  178.274.
    (20) ISO 4626:1980(E), Volatile organic liquids--Determination of 
boiling range of organic solvents used as raw materials, First Edition, 
1980-03-01, into Sec.  173.121.
    (21) ISO 4706:2008(E), Gas cylinders--Refillable welded steel 
cylinders--Test pressure 60 bar and below, First Edition, 2008-04-15, 
Corrected Version, 2008-07-01, into Sec.  178.71.
    (22) ISO 6406(E), Gas cylinders--Seamless steel gas cylinders--
Periodic inspection and testing, Second edition, February 2005, into 
Sec.  180.207.
    (23) ISO 6892 Metallic materials--Tensile testing, July 15, 1984, 
First Edition, into Sec.  178.274.
    (24) ISO 7225(E), Gas cylinders--Precautionary labels, Second 
Edition, July 2005, into Sec.  178.71.
    (25) ISO 7866(E), Gas cylinders--Refillable seamless aluminum alloy 
gas cylinders--Design, construction and testing, First edition, June 
1999, into Sec.  178.71.
    (26) ISO 8115 Cotton bales--Dimensions and density, 1986 Edition, 
into Sec.  172.102.
    (27) ISO 9809-1:1999: Gas cylinders--Refillable seamless steel gas 
cylinders--Design, construction and testing--Part 1: Quenched and 
tempered steel cylinders with tensile strength less than 1100 MPa., 
First edition, June 1999, into Sec. Sec.  178.71; 178.75.
    (28) ISO 9809-1:2010: Gas cylinders--Refillable seamless steel gas 
cylinders--Design, construction and testing--Part 1: Quenched and 
tempered steel cylinders with tensile strength less than 1100 MPa., 
Second edition, 2010-04-15, into Sec. Sec.  178.71; 178.75.
    (29) ISO 9809-2:2000: Gas cylinders--Refillable seamless steel gas 
cylinders--Design, construction and testing--Part 2: Quenched and 
tempered steel cylinders with tensile strength greater than or equal to 
1100 MPa., First edition, June 2000, into Sec. Sec.  178.71; 178.75.
    (30) ISO 9809-2:2010: Gas cylinders--Refillable seamless steel gas 
cylinders--Design, construction and testing--Part 2: Quenched and 
tempered steel cylinders with tensile strength greater than or equal to 
1100 MPa., Second edition, 2010-04-15, into Sec. Sec.  178.71; 178.75.
    (31) ISO 9809-3:2000: Gas cylinders--Refillable seamless steel gas 
cylinders--Design, construction and testing--Part 3: Normalized steel 
cylinders, First edition, December 2000, into Sec. Sec.  178.71; 
178.75.
    (32) ISO 9809-3:2010: Gas cylinders--Refillable seamless steel gas 
cylinders--Design, construction and testing--Part 3: Normalized steel 
cylinders, Second edition, 2010-04-15, into Sec. Sec.  178.71; 178.75.
    (33) ISO 9978:1992(E)--Radiation protection--Sealed radioactive 
sources--Leakage test methods. First Edition, (February 15, 1992), into 
Sec.  173.469.
    (34) ISO 10156:2010(E): Gases and gas mixtures--Determination of 
fire potential and oxidizing ability for the selection of cylinder 
valve outlets, Third edition, 2010-04-01, into Sec.  173.115.
    (35) ISO 10156:2010/Cor.1:2010(E): Gases and gas mixtures--
Determination of fire potential and oxidizing ability for the selection 
of cylinder valve outlets, Technical Corrigendum 1, 2010-09-01, into 
Sec.  173.115.
    (36) ISO 10297:1999(E), Transportable gas cylinders--Cylinder 
valves--Specification and type testing, First Edition, 1995-05-01, into 
Sec.  173.301b; 178.71.
    (37) ISO 10297:2006(E), Transportable gas cylinders--Cylinder 
valves--Specification and type testing, Second Edition, 2006-01-15, 
into Sec.  173.301b; 178.71.
    (38) ISO 10461:2005(E), Gas cylinders--Seamless aluminum-alloy gas 
cylinders--Periodic inspection and testing, Second Edition, 2005-02-15 
and Amendment 1, 2006-07-15, into Sec.  180.207.
    (39) ISO 10462 (E), Gas cylinders--Transportable cylinders for 
dissolved acetylene--Periodic inspection and maintenance, Second 
edition, February 2005, into Sec.  180.207.
    (40) ISO 10692-2:2001(E), Gas cylinders--Gas cylinder valve 
connections for use in the micro-electronics industry--Part 2: 
Specification and type testing for valve to cylinder connections, First 
Edition, 2001-08-01, into Sec. Sec.  173.40; 173.302c.
    (41) ISO 11114-1:2012(E), Gas cylinders--Compatibility of cylinder 
and valve materials with gas contents--Part 1: Metallic materials, 
Second edition, (2012-03-16), into Sec. Sec.  173.301b; 178.71.
    (42) ISO 11114-2(E), Transportable gas cylinders--Compatibility of 
cylinder and valve materials with gas contents--Part 2: Non-metallic 
materials, First edition, December 2000, into Sec. Sec.  173.301b; 
178.71.
    (43) ISO 11117:1998(E): Gas cylinders--Valve protection caps and 
valve guards--Design, construction and

[[Page 50777]]

tests, First edition, 1998-08-01, into Sec.  173.301b.
    (44) ISO 11117:2008(E): Gas cylinders--Valve protection caps and 
valve guards--Design, construction and tests, Second edition, 2008-09-
01, into Sec.  173.301b.
    (45) ISO 11117:2008/Cor.1:2009(E): Gas cylinders--Valve protection 
caps and valve guards--Design, construction and tests, Technical 
Corrigendum 1, 2009-05-01, into Sec.  173.301b.
    (46) ISO 11118(E), Gas cylinders--Non-refillable metallic gas 
cylinders--Specification and test methods, First edition, October 1999, 
into Sec.  178.71.
    (47) ISO 11119-1(E), Gas cylinders--Gas cylinders of composite 
construction--Specification and test methods--Part 1: Hoop-wrapped 
composite gas cylinders, First edition, May 2002, into Sec.  178.71.
    (48) ISO 11119-2(E), Gas cylinders--Gas cylinders of composite 
construction--Specification and test methods--Part 2: Fully wrapped 
fibre reinforced composite gas cylinders with load-sharing metal 
liners, First edition, May 2002, into Sec.  178.71.
    (49) ISO 11119-3(E), Gas cylinders of composite construction--
Specification and test methods--Part 3: Fully wrapped fibre reinforced 
composite gas cylinders with non-load-sharing metallic or non-metallic 
liners, First edition, September 2002, into Sec.  178.71.
    (50) ISO 11120(E), Gas cylinders--Refillable seamless steel tubes 
of water capacity between 150 L and 3000 L--Design, construction and 
testing, First edition, March 1999, into Sec. Sec.  178.71; 178.75.
    (51) ISO 11513:2011(E), Gas cylinders--Refillable welded steel 
cylinders containing materials for sub-atmospheric gas packaging 
(excluding acetylene)--Design, construction, testing, use and periodic 
inspection, First edition, 2011-09-12, into Sec.  173.302c; 180.207.
    (52) ISO 11621(E), Gas cylinders--Procedures for change of gas 
service, First edition, April 1997, into Sec. Sec.  173.302, 173.336, 
173.337.
    (53) ISO 11623(E), Transportable gas cylinders--Periodic inspection 
and testing of composite gas cylinders, First edition, March 2002, into 
Sec.  180.207.
    (54) ISO 13340:2001(E) Transportable gas cylinders--Cylinder valves 
for non-refillable cylinders--Specification and prototype testing, 
First edition, 2004-04-01, into Sec. Sec.  173.301b; 178.71.
    (55) ISO 13736:2008(E), Determination of flash point--Abel closed-
cup method, Second Edition, 2008-09-15, into Sec.  173.120.
    (56) ISO 16111:2008(E), Transportable gas storage devices--Hydrogen 
absorbed in reversible metal hydride, First Edition, 2008-11-15, into 
Sec. Sec.  173.301b; 173.311; 178.71.
    (57) ISO 18172-1:2007(E), Gas cylinders--Refillable welded 
stainless steel cylinders--Part 1: Test pressure 6 MPa and below, First 
Edition, 2007-03-01, into Sec.  178.71.
    (58) ISO 20703:2006(E), Gas cylinders--Refillable welded aluminum-
alloy cylinders--Design, construction and testing, First Edition, 2006-
05-01, into Sec.  178.71.
* * * * *
    (bb) * * *
    (1) * * *
    (ix) SOR/2011-239 November 9, 2011
    (x) SOR/2011-60 March 16, 2011
    (xi) SOR/2011-210 October 12, 2011
    (xii) SOR/2012-245 November 9, 2012
* * * * *
    (dd) * * *
    (1) UN Recommendations on the Transport of Dangerous Goods, Model 
Regulations (UN Recommendations), 18th revised edition, Volumes I and 
II (2013), into Sec. Sec.  171.8; 171.12; 172.202; 172.401; 172.407; 
172.502; 173.22; 173.24; 173.24b; 173.40; 173.56; 173.192; 173.302b; 
173.304b; 178.75; 178.274.
    (2) UN Recommendations on the Transport of Dangerous Goods, Manual 
of Tests and Criteria, (Manual of Tests and Criteria), into Sec. Sec.  
171.24, 172.102; 173.21; 173.56; 173.57; 173.58; 173.60; 173.115; 
173.124; 173.125; 173.127; 173.128; 173.137; 173.185; 173.220; part 
173, appendix H; 178.274:
* * * * *
    (iii) Fifth revised edition, amendment 2 (2013).
* * * * *
0
4. In Sec.  171.8:
0
a. A definition for ``Adsorbed gas'' is added in alphabetical order;
0
b. The definition for ``Bundle of cylinders'' is revised;
0
c. Definitions for ``Large salvage packaging'' and ``Neutron Radiation 
Detector'' are added in alphabetical order;
0
d. The definition for ``Non-bulk packaging'' is revised; and
0
e. A definition for ``Radiation detection system'' is added in 
alphabetical order.
    The additions and revisions read as follows:


Sec.  171.8  Definitions and abbreviations.

* * * * *
    Adsorbed gas. See Sec.  173.115 of this subchapter.
* * * * *
    Bundle of cylinders means assemblies of UN cylinders fastened 
together and interconnected by a manifold and transported as a unit. 
The total water capacity for the bundle may not exceed 3,000 L, except 
that a bundle intended for the transport of gases in Division 2.3 is 
limited to a water capacity of 1,000 L. Not permitted for air 
transport.
* * * * *
    Large salvage packaging means a special packaging into which 
damaged, defective or leaking hazardous materials packages, or 
hazardous materials that have spilled or leaked are placed for the 
purpose of transport for recovery or disposal, that--
    (1) Is designed for mechanical handling; and
    (2) Has a net mass greater than 400 kg (882 pounds) or a capacity 
of greater than 450 L (119 gallons), but has a volume of not more than 
3 cubic meters (106 cubic feet).
* * * * *
    Neutron Radiation Detector means a device that detects neutron 
radiation. In such a device, a gas may be contained in a hermetically 
sealed electron tube transducer that converts neutron radiation into a 
measurable electric signal.
    Non-bulk packaging means a packaging which has:
    (1) A maximum capacity of 450 L (119 gallons) or less as a 
receptacle for a liquid;
    (2) A maximum net mass of 400 kg (882 pounds) or less and a maximum 
capacity of 450 L (119 gallons) or less as a receptacle for a solid;
    (3) A water capacity of 454 kg (1000 pounds) or less as a 
receptacle for a gas as defined in Sec.  173.115 of this subchapter; or
    (4) Regardless of the definition of bulk packaging, a maximum net 
mass of 400 kg (882) or less for a bag or a box conforming to the 
applicable requirements for specification packagings in subpart L of 
part 178 of this subchapter.
* * * * *
    Radiation detection system means an apparatus that contains 
radiation detectors as components.
* * * * *
0
5. In Sec.  171.23 revise paragraph (b)(2) and add paragraph 
(b)(11)(ix) to read as follows:


Sec.  171.23  Requirements for specific materials and packagings 
transported under the ICAO Technical Instructions, IMDG Code, Transport 
Canada TDG Regulations, or the IAEA Regulations.

* * * * *
    (b) * * *
    (2) Safety devices for vehicles, vessels or aircraft, e.g. air bag 
inflators, air bag modules, seat-belt pretensioners, and

[[Page 50778]]

pyromechanical devices. For each approved safety device, the shipping 
paper description must conform to the requirements in Sec.  173.166(c) 
of this subchapter.
    (i) The EX number or product code must be included in association 
with the basic shipping description. When a product code is used, it 
must be traceable to the specific EX number assigned to the inflator, 
module or seat-belt pretensioner by the Associate Administrator. The EX 
number or product code is not required to be marked on the outside 
package.
    (ii) [Reserved]
* * * * *
    (11) * * *
    (ix) Packages containing fissile materials must conform to the 
requirements of Sec.  173.453 to be otherwise excepted from the 
requirements of Subpart I of Part 173 for fissile materials.
* * * * *
0
6. In Sec.  171.24 paragraph (d)(1)(ii) is revised to read as follows:


Sec.  171.24  Additional requirements for the use of the ICAO Technical 
Instructions.

* * * * *
    (d) * * *
    (1) * * *
    (ii) Lithium metal cells and batteries. Lithium metal cells and 
batteries (UN3090) are forbidden for transport aboard passenger-
carrying aircraft. The outside of each package that contains lithium 
metal cells or lithium metal batteries (UN3090) transported in 
accordance with Packing Instruction 968, Section II must be marked 
``PRIMARY LITHIUM BATTERIES--FORBIDDEN FOR TRANSPORT ABOARD PASSENGER 
AIRCRAFT'' or ``LITHIUM METAL BATTERIES--FORBIDDEN FOR TRANSPORT ABOARD 
PASSENGER AIRCRAFT'', or labeled with a CARGO AIRCRAFT ONLY label 
specified in Sec.  172.448 of this subchapter.
* * * * *
0
7. In Sec.  171.25, paragraph (b)(3) is revised to read as follows:


Sec.  171.25  Additional requirements for the use of the IMDG Code.

* * * * *
    (b) * * *
    (3) The outside of each package containing lithium metal cells or 
batteries (UN3090) transported in accordance with special provision 188 
of the IMDG Code must be marked ``PRIMARY LITHIUM BATTERIES--FORBIDDEN 
FOR TRANSPORT ABOARD PASSENGER AIRCRAFT'' or ``LITHIUM METAL 
BATTERIES--FORBIDDEN FOR TRANSPORT ABOARD PASSENGER AIRCRAFT'', or 
labeled with a CARGO AIRCRAFT ONLY label specified in Sec.  172.448 of 
this subchapter. The provisions of this paragraph do not apply to 
packages that contain 5 kg (11 pounds) net weight or less of lithium 
metal cells or batteries that are packed with, or contained in, 
equipment.
* * * * *

PART 172--HAZARDOUS MATERIALS TABLE, SPECIAL PROVISIONS, HAZARDOUS 
MATERIALS COMMUNICATIONS, EMERGENCY RESPONSE INFORMATION, TRAINING 
REQUIREMENTS, AND SECURITY PLANS

0
8. The authority citation for part 172 continues to read as follows:

    Authority:  49 U.S.C. 5101-5128, 44701; 49 CFR 1.81, 1.96 and 
1.97.

0
9. In Sec.  172.101:
0
a. Paragraph (f) and paragraph (k) introductory text are revised;
0
b. The Hazardous Materials Table is amended by removing the entries 
under ``[REMOVE]'', by adding in the appropriate alphabetical sequence 
the entries under ``[ADD]'' and revising entries under ``[REVISE]''; 
and
0
c. Appendix B to Sec.  172.101, the List of Marine Pollutants is 
amended by removing one (1) entry and adding the following sixty-two 
(62) entries in appropriate alphabetical order.
    The additions and revisions read as follows:


Sec.  172.101  Purpose and use of the hazardous materials table.

* * * * *
    (f) Column 5: Packing group. Column 5 of the HMT specifies one or 
more packing groups assigned to a material corresponding to the proper 
shipping name and hazard class for that material. Class 2, Class 7, 
Division 6.2 (other than regulated medical wastes), and ORM-D 
materials, do not have packing groups. Articles in other than Class 1 
are not assigned to packing groups. For packing purposes, any 
requirement for a specific packaging performance level is set out in 
the applicable packing authorizations of part 173. Packing Groups I, II 
and III indicate the degree of danger presented by the material is 
either great, medium or minor, respectively. If more than one packing 
group is indicated for an entry, the packing group for the hazardous 
material is determined using the criteria for assignment of packing 
groups specified in subpart D of part 173. When a reevaluation of test 
data or new data indicates a need to modify the specified packing 
group(s), the data should be submitted to the Associate Administrator. 
Each reference in this column to a material which is a hazardous waste 
or a hazardous substance, and whose proper shipping name is preceded in 
Column 1 of the Table by the letter ``A'' or ``W'', is modified to read 
``III'' on those occasions when the material is offered for 
transportation or transported by a mode in which its transportation is 
not otherwise subject to requirements of this subchapter.
* * * * *
    (k) Column 10: Vessel stowage requirements. Column 10A [Vessel 
stowage] specifies the authorized stowage locations on board cargo and 
passenger vessels. Column 10B [Other provisions] specifies codes for 
stowage and handling requirements for specific hazardous materials. 
Hazardous materials offered for transportation as limited quantities 
are allocated stowage category A and are not subject to the stowage 
codes assigned by column 10B. The meaning of each code in Column 10B is 
set forth in Sec.  176.84 of this subchapter. Section 176.63 of this 
subchapter sets forth the physical requirements for each of the 
authorized locations listed in Column 10A. (For bulk transportation by 
vessel, see 46 CFR parts 30 to 40, 70, 98, 148, 151, 153 and 154.) The 
authorized stowage locations specified in Column 10A are defined as 
follows:
* * * * *

[[Page 50779]]



 
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
                                                                                                                                               (8)                                      (9)                            (10)
                    Hazardous                                                                                          -----------------------------------------------------------------------------------------------------------------
                    materials        Hazard                                                                Special                 Packaging Sec.   173.* * *             Quantity limitations (see Sec.          Vessel stowage
   Symbols      descriptions and    class or     Identification          PG            Label codes        provisions   --------------------------------------------------    Sec.   173.27 and 175.75)   -------------------------------
                 proper shipping    division          Nos.                                                  (Sec.                                                        --------------------------------
                      names                                                                                172.102)        Exceptions        Non-bulk          Bulk          Passenger    Cargo aircraft     Location          Other
                                                                                                                                                                           aircraft/rail       only
(1)            (2)...............         (3)  (4)..............  (5)............  (6)...............  (7)............  (8A)...........  (8B)...........  (8C)..........  (9A)..........  (9B)..........  (10A).........  (10B)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
               [REMOVE]..........
 
                                                                                                              * * * * * * *
I............  Air bag inflators,        1.4G  UN0503...........  ...............  1.4G..............  161, A200......  None...........  62.............  None..........  Forbidden.....  75 kg.........  02............  25.
                or Air bag
                modules, or Seat-
                belt
                pretensioners.
               Air bag inflators,           9  UN3268...........  III............  9.................  160, A200......  166............  166............  166...........  25 kg.........  100 kg........  A.............
                or Air bag
                modules, or Seat-
                belt
                pretensioners.
 
                                                                                                              * * * * * * *
               Ammonium nitrate,         1.1D  UN0222...........  II.............  1.1D..............  ...............  None...........  62.............  None..........  Forbidden.....  Forbidden.....  04............  25, 19E.
                with more than
                0.2 percent
                combustible
                substances,
                including any
                organic substance
                calculated as
                carbon, to the
                exclusion of any
                other added
                substance.
               Ammonium nitrate,          5.1  UN1942...........  III............  5.1...............  A1, A29, B120,   152............  213............  240...........  25 kg.........  100 kg........  A.............  25, 59, 60,
                with not more                                                                           IB8, IP3, T1,                                                                                                      116.
                than 0.2% total                                                                         TP33.
                combustible
                material,
                including any
                organic
                substance,
                calculated as
                carbon to the
                exclusion of any
                other added
                substance.
 
                                                                                                              * * * * * * *
I............  Blue asbestos                9  UN2212...........  II.............  9.................  156, IB8, IP2,   155............  216............  240...........  Forbidden.....  Forbidden.....  A.............  34, 40.
                (Crocidolite) or                                                                        IP4, T3, TP33.
                Brown asbestos
                (amosite,
                mysorite).
 
                                                                                                              * * * * * * *
               Capacitor,                   9  UN3499...........  ...............  9.................  361............  176............  176............  176...........  No limit......  No limit......  A.............
                electric double
                layer (with an
                energy storage
                capacity greater
                than 0.3 Wh).
 
                                                                                                              * * * * * * *
               Chemical kits.....           9  UN3316...........  ...............  9.................  15.............  161............  161............  None..........  10 kg.........  10 kg.........  A.............
 
                                                                                                              * * * * * * *
               First aid kits....           9  UN3316...........  ...............  9.................  15.............  161............  161............  None..........  10 kg.........  10 kg.........  A.............
 
                                                                                                              * * * * * * *
               Trinitrobenzene,          1.1D  UN0214...........  II.............  1.1D..............  ...............  None...........  62.............  None..........  Forbidden.....  Forbidden.....  04............  25.
                dry or wetted
                with less than 30
                percent water, by
                mass.

[[Page 50780]]

 
 
                                                                                                              * * * * * * *
I............  White asbestos               9  UN2590...........  III............  9.................  156, IB8, IP2,   155............  216............  240...........  200 kg........  200 kg........  A.............  34, 40.
                (chrysotile,                                                                            IP3, T1, TP33.
                actinolite,
                anthophyllite,
                tremolite).
 
                                                                                                              * * * * * * *
               [ADD].............
G............  Adsorbed gas,              2.2  UN3511...........  ...............  2.2...............  ...............  None...........  302c...........  302c..........  75 kg.........  150 kg........  A.............
                n.o.s.
G............  Adsorbed gas,              2.1  UN3510...........  ...............  2.1...............  ...............  None...........  302c...........  302c..........  Forbidden.....  150 kg........  D.............  40.
                flammable, n.o.s.
G............  Adsorbed gas,              2.2  UN3513...........  ...............  2.2, 5.1..........  ...............  None...........  302c...........  302c..........  75 kg.........  150 kg........  D.............
                oxidizing, n.o.s.
G............  Adsorbed gas,              2.3  UN3512...........  ...............  2.3...............  1..............  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  40.
                toxic, n.o.s.
                Inhalation hazard
                zone A.
G............  Adsorbed gas,              2.3  UN3512...........  ...............  2.3...............  2, B9, B14.....  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  40.
                toxic, n.o.s.
                Inhalation hazard
                zone B.
G............  Adsorbed gas,              2.3  UN3512...........  ...............  2.3...............  3, B14.........  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  40.
                toxic, n.o.s.
                Inhalation hazard
                zone C.
G............  Adsorbed gas,              2.3  UN3512...........  ...............  2.3...............  4..............  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  40.
                toxic, n.o.s.
                Inhalation hazard
                zone D.
G............  Adsorbed gas,              2.3  UN3516...........  ...............  2.3, 8............  1..............  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  40.
                toxic, corrosive,
                n.o.s. Inhalation
                hazard zone A.
G............  Adsorbed gas,              2.3  UN3516...........  ...............  2.3, 8............  2, B9, B14.....  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  40.
                toxic, corrosive,
                n.o.s. Inhalation
                hazard zone B.
G............  Adsorbed gas,              2.3  UN3516...........  ...............  2.3, 8............  3, B14.........  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  40.
                toxic, corrosive,
                n.o.s. Inhalation
                hazard zone C.
G............  Adsorbed gas,              2.3  UN3516...........  ...............  2.3, 8............  4..............  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  40.
                toxic, corrosive,
                n.o.s. Inhalation
                hazard zone D.
G............  Adsorbed gas,              2.3  UN3514...........  ...............  2.3, 2.1..........  1..............  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  40.
                toxic, flammable,
                n.o.s. Inhalation
                hazard zone A.
G............  Adsorbed gas,              2.3  UN3514...........  ...............  2.3, 2.1..........  2, B9, B14.....  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  40.
                toxic, flammable,
                n.o.s. Inhalation
                hazard zone B.
G............  Adsorbed gas,              2.3  UN3514...........  ...............  2.3, 2.1..........  3, B14.........  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  40.
                toxic, flammable,
                n.o.s. Inhalation
                hazard zone C.

[[Page 50781]]

 
G............  Adsorbed gas,              2.3  UN3514...........  ...............  2.3, 2.1..........  4..............  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  40.
                toxic, flammable,
                n.o.s. Inhalation
                hazard zone D.
G............  Adsorbed gas,              2.3  UN3517...........  ...............  2.3, 2.1, 8.......  1..............  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  17, 40.
                toxic, flammable,
                corrosive, n.o.s.
                Inhalation hazard
                zone A.
G............  Adsorbed gas,              2.3  UN3517...........  ...............  2.3, 2.1, 8.......  2, B9, B14.....  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  17, 40.
                toxic, flammable,
                corrosive, n.o.s.
                Inhalation hazard
                zone B.
G............  Adsorbed gas,              2.3  UN3517...........  ...............  2.3, 2.1, 8.......  3, B14.........  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  17, 40.
                toxic, flammable,
                corrosive, n.o.s.
                Inhalation hazard
                zone C.
G............  Adsorbed gas,              2.3  UN3517...........  ...............  2.3, 2.1, 8.......  4..............  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  17, 40.
                toxic, flammable,
                corrosive, n.o.s.
                Inhalation hazard
                zone D.
G............  Adsorbed gas,              2.3  UN3515...........  ...............  2.3, 5.1..........  1..............  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  40.
                toxic, oxidizing,
                n.o.s. Inhalation
                hazard zone A.
G............  Adsorbed gas,              2.3  UN3515...........  ...............  2.3, 5.1..........  2, B9, B14.....  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  40.
                toxic, oxidizing,
                n.o.s. Inhalation
                hazard zone B.
G............  Adsorbed gas,              2.3  UN3515...........  ...............  2.3, 5.1..........  3, B14.........  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  40.
                toxic, oxidizing,
                n.o.s. Inhalation
                hazard zone C.
G............  Adsorbed gas,              2.3  UN3515...........  ...............  2.3, 5.1..........  4..............  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  40.
                toxic, oxidizing,
                n.o.s. Inhalation
                hazard zone D.
G............  Adsorbed gas,              2.3  UN3518...........  ...............  2.3, 5.1, 8.......  1..............  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  40, 89, 90.
                toxic, oxidizing,
                corrosive, n.o.s.
                Inhalation hazard
                zone A.
G............  Adsorbed gas,              2.3  UN3518...........  ...............  2.3, 5.1, 8.......  2, B9, B14.....  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  40, 89, 90.
                toxic, oxidizing,
                corrosive, n.o.s.
                Inhalation hazard
                zone B.
G............  Adsorbed gas,              2.3  UN3518...........  ...............  2.3, 5.1, 8.......  3, B14.........  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  40, 89, 90.
                toxic, oxidizing,
                corrosive, n.o.s.
                Inhalation hazard
                zone C.
G............  Adsorbed gas,              2.3  UN3518...........  ...............  2.3, 5.1, 8.......  4..............  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  40, 89, 90.
                toxic, oxidizing,
                corrosive, n.o.s.
                Inhalation hazard
                zone D.
 
                                                                                                              * * * * * * *
               Air bag inflators,
                or Air bag
                modules, or Seat-
                belt
                pretensioners,
                see Safety
                devices,
                electrically
                initiated or
                Safety devices,
                pyrotechnic.
 
                                                                                                              * * * * * * *
               Ammonium nitrate..        1.1D  UN0222...........  II.............  1.1D..............  370............  None...........  62.............  None..........  Forbidden.....  Forbidden.....  04............  25, 19E.

[[Page 50782]]

 
               Ammonium nitrate,          5.1  UN1942...........  III............  5.1...............  A1, A29, B120,   152............  213............  240...........  25 kg.........  100 kg........  A.............  25, 59, 60,
                with not more                                                                           IB8, IP3, T1,                                                                                                      66, 116, 124.
                than 0.2%                                                                               TP33.
                combustible
                substances,
                including any
                organic
                substance,
                calculated as
                carbon to the
                exclusion of any
                other added
                substance.
 
                                                                                                              * * * * * * *
G I..........  Asbestos,                    9  UN2212...........  II.............  9.................  156, IB8, IP2,   155............  216............  240...........  Forbidden.....  Forbidden.....  A.............  34, 40.
                amphibole                                                                               IP4, T3, TP33.
                (amosite,
                tremolite,
                actinolite,
                anthophyllite, or
                crocidolite).
I............  Asbestos,                    9  UN2590...........  III............  9.................  156, IB8, IP2,   155............  216............  240...........  200 kg........  200 kg........  A.............  34, 40.
                chrysotile.                                                                             IP3, T1, TP33.
 
                                                                                                              * * * * * * *
               Boron trifluoride,         2.3  UN3519...........  ...............  2.3, 8............  2, B9, B14.....  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  40.
                adsorbed.
 
                                                                                                              * * * * * * *
               Capacitor,                   9  UN3508...........  ...............  9.................  372............  176............  176............  176...........  No limit......  No Limit......  A.............
                asymmetric (with
                an energy storage
                capacity greater
                than 0.3Wh).
               Capacitor,                   9  UN3499...........  ...............  9.................  361............  176............  176............  176...........  No limit......  No limit......  A.............
                electric double
                layer (with an
                energy storage
                capacity greater
                than 0.3 Wh).
 
                                                                                                              * * * * * * *
               Chemical kits.....           9  UN3316...........  II.............  9.................  15.............  161............  161............  None..........  10 kg.........  10 kg.........  A.............
 
                                                                                                              * * * * * * *
               Chlorine, adsorbed         2.3  UN3520...........  ...............  2.3, 5.1, 8.......  2, B9, B14, N86  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  40, 89, 90.
 
                                                                                                              * * * * * * *
               First aid kits....           9  UN3316...........  II.............  9.................  15.............  161............  161............  None..........  10 kg.........  10 kg.........  A.............
               First aid kits....           9  UN3316...........  III............  9.................  15.............  161............  161............  None..........  10 kg.........  10 kg.........  A.............
 
                                                                                                              * * * * * * *
               Germane, adsorbed.         2.3  UN3523...........  ...............  2.3, 2.1..........  2..............  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  40.
 
                                                                                                              * * * * * * *
               Hydrogen selenide,         2.3  UN3526...........  ...............  2.3, 2.1..........  1..............  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  40.
                adsorbed.
 
                                                                                                              * * * * * * *
               Phosphine,                 2.3  UN3525...........  ...............  2.3, 2.1..........  1..............  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  40.
                adsorbed.
 

[[Page 50783]]

 
                                                                                                              * * * * * * *
               Phosphorus                 2.3  UN3524...........  ...............  2.3, 8............  2, B9, B14.....  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  40.
                pentafluoride,
                adsorbed.
 
                                                                                                              * * * * * * *
G............  Self-reactive              4.1  UN3231...........  II.............  4.1...............  ...............  None...........  224............  None..........  Forbidden.....  Forbidden.....  D.............  2, 25, 52, 53.
                liquid type B,
                temperature
                controlled.
 
                                                                                                              * * * * * * *
               Safety devices,              9  UN3268...........  ...............  9.................  160, A200......  166............  166............  166...........  25 kg.........  100 kg........  A.............
                electrically
                initiated.
               Safety devices,           1.4G  UN0503...........  ...............  1.4G..............  A200...........  None...........  62.............  None..........  Forbidden.....  75 kg.........  02............  25.
                pyrotechnic.
 
                                                                                                              * * * * * * *
               Silicon                    2.3  UN3521...........  ...............  2.3, 8............  2..............  None...........  302c...........  302c..........  Forbidden.....  Forbidden.....  D.............  40.
                tetrafluoride,
                adsorbed.
 
                                                                                                              * * * * * * *
               Trifluorochloroeth         2.3  UN1082...........  ...............  2.3, 2.1..........  3, B14, T50....  None...........  304............  314, 315......  Forbidden.....  Forbidden.....  D.............  40.
                ylene, stabilized
                or Refrigerant
                gas R 1113.
 
                                                                                                              * * * * * * *
               Trinitrobenzene,          1.1D  UN0214...........  II.............  1.1D..............  ...............  None...........  62.............  None..........  Forbidden.....  Forbidden.....  04............  25.
                dry or wetted
                with less than 30
                percent water, by
                mass.
               Trinitrobenzene,           4.1  UN1354...........  I..............  4.1...............  23, A2, A8,      None...........  211............  None..........  0.5 kg........  0.5 kg........  E.............  28, 36.
                wetted with not                                                                         A19, N41.
                less than 30
                percent water, by
                mass.
 
                                                                                                              * * * * * * *
               Uranium                      8  UN3507...........  I..............  8, 7..............  369............  420............  None...........  None..........  Less than .1    Less than .1    A.............  132.
                hexafluoride,                                                                                                                                              kg.             kg.
                radioactive
                material,
                excepted package,
                less than 0.1 kg
                per package, non-
                fissile or
                fissile-excepted.
 
                                                                                                              * * * * * * *
               [REVISE]..........
               Aircraft hydraulic           3  UN3165...........  I..............  3, 6.1, 8.........  ...............  None...........  172............  None..........  Forbidden.....  42 L..........  E.............  21, 40, 49,
                power unit fuel                                                                                                                                                                                            100.
                tank (containing
                a mixture of
                anhydrous
                hydrazine and
                monomethyl
                hydrazine) (M86
                fuel).
 
                                                                                                              * * * * * * *
               Acrylamide, solid.         6.1  UN2074...........  III............  6.1...............  IB8, IP3, T1,    153............  213............  240...........  100 kg........  200 kg........  A.............  12, 25.
                                                                                                        TP33.
               Acrylamide                 6.1  UN3426...........  III............  6.1...............  IB3, T4, TP1...  153............  203............  241...........  60 L..........  220 L.........  A.............  12, 25.
                solution.
 
                                                                                                              * * * * * * *
               Aldol.............         6.1  UN2839...........  II.............  6.1...............  IB2, T7, TP2...  153............  202............  243...........  5 L...........  60 L..........  A.............  12, 25.
 
                                                                                                              * * * * * * *
               Alkali metal               4.3  UN1421...........  I..............  4.3...............  A2, A3, A7,      None...........  201............  244...........  Forbidden.....  1 L...........  D.............  13, 52, 148.
                alloys, liquid,                                                                         B48, N34.
                n.o.s.

[[Page 50784]]

 
               Alkali metal               4.3  UN1389...........  I..............  4.3...............  A2, A3, A7, N34  None...........  201............  244...........  Forbidden.....  1 L...........  D.............  13, 40, 52,
                amalgam, liquid.                                                                                                                                                                                           148.
 
                                                                                                              * * * * * * *
               Alkali metal               4.3  UN3401...........  I..............  4.3...............  IB4, IP1, N40,   None...........  211............  242...........  Forbidden.....  15 kg.........  D.............  13, 52, 148.
                amalgam, solid.                                                                         T9, TP7, TP33.
 
                                                                                                              * * * * * * *
               Alkali metal               4.3  UN1390...........  II.............  4.3...............  A6, A7, A8,      151............  212............  241...........  15 kg.........  50 kg.........  E.............  13, 40, 52,
                amides.                                                                                 A19, A20, IB7,                                                                                                     148.
                                                                                                        IP2, T3, TP33.
 
                                                                                                              * * * * * * *
               Alkali metal               4.3  UN3482...........  I..............  4.3, 3............  A2, A3, A7.....  None...........  201............  244...........  Forbidden.....  1 L...........  D.............  13, 52, 148.
                dispersions,
                flammable or
                Alkaline earth
                metal
                dispersions,
                flammable.
               Alkali metal               4.3  UN1391...........  I..............  4.3...............  A2, A3, A7.....  None...........  201............  244...........  Forbidden.....  1 L...........  D.............  13, 52, 148.
                dispersions, or
                Alkaline earth
                metal dispersions.
 
                                                                                                              * * * * * * *
               Alkaline earth             4.3  UN1393...........  II.............  4.3...............  A19, IB7, IP2,   151............  212............  241...........  15 kg.........  50 kg.........  E.............  13, 52, 148.
                metal alloys,                                                                           T3, TP33.
                n.o.s.
               Alkaline earth             4.3  UN1392...........  I..............  4.3...............  A19, N34, N40..  None...........  201............  244...........  Forbidden.....  1 L...........  E.............  13, 40, 52,
                metal amalgams,                                                                                                                                                                                            148.
                liquid.
               Alkaline earth             4.3  UN3402...........  I..............  4.3...............  A19, N34, N40,   None...........  211............  242...........  Forbidden.....  15 kg.........  D.............  13, 52, 148.
                metal amalgams,                                                                         T9, TP7, TP33.
                solid.
 
                                                                                                              * * * * * * *
               Allyl                      6.1  UN1722...........  I..............  6.1, 3, 8.........  2, B9, B14,      None...........  227............  244...........  Forbidden.....  Forbidden.....  D.............  21, 40, 100.
                chloroformate.                                                                          B32, N41, T20,
                                                                                                        TP2, TP13,
                                                                                                        TP38, TP45.
 
                                                                                                              * * * * * * *
               Aluminum                   4.2  UN2870...........  I..............  4.2, 4.3..........  B11, T21, TP7,   None...........  181............  244...........  Forbidden.....  Forbidden.....  D.............  13, 148.
                borohydride or                                                                          TP33.
                Aluminum
                borohydride in
                devices.
 

[[Page 50785]]

 
                                                                                                              * * * * * * *
               Aluminum carbide..         4.3  UN1394...........  II.............  4.3...............  A20, IB7, IP2,   151............  212............  242...........  15 kg.........  50 kg.........  A.............  13, 52, 148.
                                                                                                        N41, T3, TP33.
 
                                                                                                              * * * * * * *
               Aluminum                   4.3  UN1395...........  II.............  4.3, 6.1..........  A19, IB5, IP2,   151............  212............  242...........  15 kg.........  50 kg.........  A.............  13, 39, 40,
                ferrosilicon                                                                            T3, TP33.                                                                                                          52, 53, 85,
                powder.                                                                                                                                                                                                    103, 148.
                                                                  III............  4.3, 6.1..........  A19, A20, IB4..  151............  213............  241...........  25 kg.........  100 kg........  A.............  13, 39, 40,
                                                                                                                                                                                                                           52, 53, 85,
                                                                                                                                                                                                                           103.
               Aluminum hydride..         4.3  UN2463...........  I..............  4.3...............  A19, N40.......  None...........  211............  242...........  Forbidden.....  15 kg.........  E.............  13, 148.
 
                                                                                                              * * * * * * *
               Aluminum phosphide         4.3  UN1397...........  I..............  4.3, 6.1..........  A8, A19, N40...  None...........  211............  242...........  Forbidden.....  15 kg.........  E.............  13, 40, 52,
                                                                                                                                                                                                                           85, 148.
 
                                                                                                              * * * * * * *
               Aluminum powder,           4.1  UN1309...........  II.............  4.1...............  IB8, IP2, IP4,   151............  212............  240...........  15 kg.........  50 kg.........  A.............  13, 39, 52,
                coated.                                                                                 T3, TP33.                                                                                                          53, 74, 101,
                                                                                                                                                                                                                           147, 148.
                                                                  III............  4.1...............  IB8, IP3, T1,    151............  213............  240...........  25 kg.........  100 kg........  A.............  13, 39, 52,
                                                                                                        TP33.                                                                                                              53, 74, 101,
                                                                                                                                                                                                                           147, 148.
               Aluminum powder,           4.3  UN1396...........  II.............  4.3...............  A19, A20, IB7,   151............  212............  242...........  15 kg.........  50 kg.........  A.............  13, 39, 52,
                uncoated.                                                                               IP2, T3, TP33.                                                                                                     53, 148.
                                                                  III............  4.3...............  A19, A20, IB8,   151............  213............  241...........  25 kg.........  100 kg........  A.............  13, 39, 52,
                                                                                                        IP4, T1, TP33.                                                                                                     53, 148.
 
                                                                                                              * * * * * * *
               Aluminum silicon           4.3  UN1398...........  III............  4.3...............  A1, A19, IB8,    151............  213............  241...........  25 kg.........  100 kg........  A.............  13, 39, 40,
                powder, uncoated.                                                                       IP4, T1, TP33.                                                                                                     52, 53, 85,
                                                                                                                                                                                                                           103, 148.
               Aluminum smelting          4.3  UN3170...........  II.............  4.3...............  128, B115, IB7,  None...........  212............  242...........  15 kg.........  50 kg.........  B.............  13, 85, 103,
                by-products or                                                                          IP2, T3, TP33.                                                                                                     148.
                Aluminum
                remelting by-
                products.
                                                                  III............  4.3...............  128, B115, IB8,  None...........  213............  241...........  25 kg.........  100 kg........  B.............  13, 85, 103,
                                                                                                        IP4, T1, TP33.                                                                                                     148.
 
                                                                                                              * * * * * * *
               N-Aminoethyl-                8  UN2815...........  III............  8.................  IB3, T4, TP1...  154............  203............  241...........  5 L...........  60 L..........  A.............  12, 25.
                piperazine.
 
                                                                                                              * * * * * * *
               Aminopyridines (o-         6.1  UN2671...........  II.............  6.1...............  IB8, IP2, IP4,   153............  212............  242...........  25 kg.........  100 kg........  B.............  12, 25, 40,
                ; m-; p-).                                                                              T3, TP33.                                                                                                          52.
 
                                                                                                              * * * * * * *
               Ammonium nitrate           5.1  UN2067...........  III............  5.1...............  52, 150, B120,   152............  213............  240...........  25 kg.........  100 kg........  B.............  25, 59, 60,
                based fertilizer.                                                                       IB8, IP3, T1,                                                                                                      66, 117, 124.
                                                                                                        TP33.
 

[[Page 50786]]

 
                                                                                                              * * * * * * *
               Ammonium nitrate           5.1  UN3375...........  II.............  5.1...............  147, 163, IB2,   None...........  231............  231...........  Forbidden.....  Forbidden.....  D.............  25, 59, 60,
                emulsion or                                                                             IP16, TP32.                                                                                                        66, 124.
                Ammonium nitrate
                suspension or
                Ammonium nitrate
                gel, intermediate
                for blasting
                explosives.
 
                                                                                                              * * * * * * *
               Ammonium nitrate,          5.1  UN2426...........  ...............  5.1...............  B5, T7.........  None...........  None...........  243...........  Forbidden.....  Forbidden.....  D.............  59, 60, 124.
                liquid (hot
                concentrated
                solution).
 
                                                                                                              * * * * * * *
               Ammonium nitrate,          5.1  UN1942...........  III............  5.1...............  A1, A29, B120,   152............  213............  240...........  25 kg.........  100 kg........  A.............  25, 59, 60,
                with not more                                                                           IB8, IP3, T1,                                                                                                      66, 116, 124.
                than 0.2% total                                                                         TP33.
                combustible
                material,
                including any
                organic
                substance,
                calculated as
                carbon to the
                exclusion of any
                other added
                substance.
 
                                                                                                              * * * * * * *
               Ammonium                     8  UN2818...........  II.............  8, 6.1............  IB2, T7, TP2,    154............  202............  243...........  1 L...........  30 L..........  B.............  12, 25, 40,
                polysulfide,                                                                            TP13.                                                                                                              52.
                solution.
                                                                  III............  8, 6.1............  IB3, T4, TP1,    154............  203............  241...........  5 L...........  60 L..........  B.............  12, 25, 40,
                                                                                                        TP13.                                                                                                              52.
 
                                                                                                              * * * * * * *
               Ammonium sulfide             8  UN2683...........  II.............  8, 6.1, 3.........  IB1, T7, TP2,    154............  202............  243...........  1 L...........  30 L..........  B.............  12, 25, 22,
                solution.                                                                               TP13.                                                                                                              52, 100.
 
                                                                                                              * * * * * * *
               Ammunition, tear-          6.1  UN2017...........  ...............  6.1, 8............  ...............  None...........  212............  None..........  Forbidden.....  50 kg.........  E.............  13, 40.
                producing, non-
                explosive,
                without burster
                or expelling
                charge, non-fuzed.
 
                                                                                                              * * * * * * *
               Ammunition, toxic,         6.1  UN2016...........  ...............  6.1...............  ...............  None...........  212............  None..........  Forbidden.....  100 kg........  E.............  13, 40.
                non-explosive,
                without burster
                or expelling
                charge, non-fuzed.
 

[[Page 50787]]

 
                                                                                                              * * * * * * *
               Anisoyl chloride..           8  UN1729...........  II.............  8.................  B2, B4, IB8,     154............  212............  240...........  15 kg.........  50 kg.........  A.............  40.
                                                                                                        IP2, IP4, T3,
                                                                                                        TP33.
 
                                                                                                              * * * * * * *
               Antimony                     8  UN1732...........  II.............  8, 6.1............  A3, A6, A7,      None...........  202............  243...........  Forbidden.....  30 L..........  D.............  40, 44, 89,
                pentafluoride.                                                                          A10, IB2, N3,                                                                                                      100, 141.
                                                                                                        N36, T7, TP2.
 
                                                                                                              * * * * * * *
               Arsenic bromide...         6.1  UN1555...........  II.............  6.1...............  IB8, IP2, IP4,   153............  212............  242...........  25 kg.........  100 kg........  A.............  12, 25, 40.
                                                                                                        T3, TP33.
 
                                                                                                              * * * * * * *
               Articles,                  2.2  UN3164...........  ...............  2.2...............  371............  306............  302, 304.......  None..........  No limit......  No limit......  A.............
                pressurized
                pneumatic or
                hydraulic
                containing non-
                flammable gas.
 
                                                                                                              * * * * * * *
               Barium............         4.3  UN1400...........  II.............  4.3...............  A19, IB7, IP2,   151............  212............  241...........  15 kg.........  50 kg.........  E.............  13, 52, 148.
                                                                                                        T3, TP33.
               Barium alloys,             4.2  UN1854...........  I..............  4.2...............  T21, TP7, TP33.  None...........  181............  None..........  Forbidden.....  Forbidden.....  D.............  13, 148.
                pyrophoric.
 
                                                                                                              * * * * * * *
               Barium azide,              4.1  UN1571...........  I..............  4.1, 6.1..........  162, A2........  None...........  182............  None..........  Forbidden.....  0.5 kg........  D.............  28, 36.
                wetted with not
                less than 50
                percent water, by
                mass.
 
                                                                                                              * * * * * * *
               Barium peroxide...         5.1  UN1449...........  II.............  5.1, 6.1..........  A9, IB6, IP2,    152............  212............  242...........  5 kg..........  25 kg.........  C.............  13, 52, 66,
                                                                                                        T3, TP33.                                                                                                          75, 148.
 
                                                                                                              * * * * * * *
               Batteries,                 4.3  UN3292...........  ...............  4.3...............  ...............  189............  189............  189...........  Forbidden.....  No limit......  A.............  13, 148.
                containing sodium.
               Batteries, dry,              8  UN3028...........  ...............  8.................  237............  None...........  213............  None..........  25 kg.........  230 kg........  A.............
                containing
                potassium
                hydroxide solid,
                electric storage.
 
                                                                                                              * * * * * * *
               Batteries, wet,              8  UN2794...........  ...............  8.................  A51............  159............  159............  159...........  30 kg.........  No limit......  A.............
                filled with acid,
                electric storage.
               Batteries, wet,              8  UN2795...........  ...............  8.................  A51............  159............  159............  159...........  30 kg.........  No limit......  A.............
                filled with
                alkali, electric
                storage.
               Batteries, wet,              8  UN2800...........  ...............  8.................  ...............  159a...........  159............  159...........  No limit......  No limit......  A.............
                non-spillable,
                electric storage.
               Beryllium, powder.         6.1  UN1567...........  II.............  6.1, 4.1..........  IB8, IP2, IP4,   153............  212............  242...........  15 kg.........  50 kg.........  A.............  13, 147, 148.
                                                                                                        T3, TP33.

[[Page 50788]]

 
+............  Boron tribromide..           8  UN2692...........  I..............  8, 6.1............  2, B9, B14,      None...........  227............  244...........  Forbidden.....  Forbidden.....  C.............  12, 25.
                                                                                                        B32, N34, T20,
                                                                                                        TP2, TP13,
                                                                                                        TP38, TP45.
 
                                                                                                              * * * * * * *
               Boron trifluoride            8  UN2851...........  II.............  8.................  IB2, T7, TP2...  154............  212............  240...........  15 kg.........  50 kg.........  B.............  12, 25, 40.
                dihydrate.
               Boron trifluoride          4.3  UN2965...........  I..............  4.3, 8, 3.........  A19, T10, TP2,   None...........  201............  243...........  Forbidden.....  1 L...........  D.............  13, 21, 25,
                dimethyl etherate.                                                                      TP7, TP13.                                                                                                         28, 40, 49,
                                                                                                                                                                                                                           100, 147,
                                                                                                                                                                                                                           148.
 
                                                                                                              * * * * * * *
               Bromoform.........         6.1  UN2515...........  III............  6.1...............  IB3, T4, TP1...  153............  203............  241...........  60 L..........  220 L.........  A.............  12, 25, 40.
 
                                                                                                              * * * * * * *
+............  Bromine...........           8  UN1744...........  I..............  8, 6.1............  1, B9, B85,      None...........  226............  249...........  Forbidden.....  Forbidden.....  D.............  12, 25, 40,
                                                                                                        N34, N43, T22,                                                                                                     66, 74.
                                                                                                        TP2, TP10,
                                                                                                        TP13.
 
                                                                                                              * * * * * * *
+............  Bromine solutions.           8  UN1744...........  I..............  8, 6.1............  1, B9, B85,      None...........  226............  249...........  Forbidden.....  Forbidden.....  D.............  12, 25, 40,
                                                                                                        N34, N43, T22,                                                                                                     66, 74, 89,
                                                                                                        TP2, TP10,                                                                                                         90.
                                                                                                        TP13.
+............  Bromine solutions.           8  UN1744...........  I..............  8, 6.1............  2, B9, B85,      None...........  227............  249...........  Forbidden.....  Forbidden.....  D.............  12, 25. 40,
                                                                                                        N34, N43, T22,                                                                                                     66, 74, 89,
                                                                                                        TP2, TP10,                                                                                                         90.
                                                                                                        TP13.
 
                                                                                                              * * * * * * *
               Bromobenzyl                6.1  UN1694...........  I..............  6.1...............  T14, TP2, TP13.  None...........  201............  243...........  Forbidden.....  30 L..........  D.............  12, 25, 40,
                cyanides, liquid.                                                                                                                                                                                          52.
               Bromobenzyl                6.1  UN3449...........  I..............  6.1...............  T6, TP33.......  None...........  211............  242...........  5 kg..........  50 kg.........  D.............  12, 25, 40,
                cyanides, solid.                                                                                                                                                                                           52.
 
                                                                                                              * * * * * * *
               tert-Butyl                 4.2  UN3255...........  I..............  4.2, 8............  ...............  None...........  211............  243...........  Forbidden.....  Forbidden.....  D.............  40.
                hypochlorite.
 

[[Page 50789]]

 
                                                                                                              * * * * * * *
               Butyl mercaptan...           3  UN2347...........  II.............  3.................  A3, A6, IB2,     150............  202............  242...........  5 L...........  60 L..........  D.............  52, 95, 102.
                                                                                                        T4, TP1.
 
                                                                                                              * * * * * * *
               5-tert-Butyl-2,4,6-        4.1  UN2956...........  III............  4.1...............  159............  None...........  223............  None..........  Forbidden.....  Forbidden.....  D.............  12, 25, 40,
                trinitro-m-xylene                                                                                                                                                                                          127.
                or Musk xylene.
 
                                                                                                              * * * * * * *
               Butyric acid......           8  UN2820...........  III............  8.................  IB3, T4, TP1...  154............  203............  241...........  5 L...........  60 L..........  A.............  12, 25.
 
                                                                                                              * * * * * * *
               Calcium...........         4.3  UN1401...........  II.............  4.3...............  IB7, IP2, T3,    151............  212............  241...........  15 kg.........  50kg..........  E.............  13, 52, 148.
                                                                                                        TP33.
 
                                                                                                              * * * * * * *
               Calcium carbide...         4.3  UN1402...........  I..............  4.3...............  A1, A8, B55,     None...........  211............  242...........  Forbidden.....  15 kg.........  B.............  13, 52, 148.
                                                                                                        B59, IB4, IP1,
                                                                                                        N34, T9, TP7,
                                                                                                        TP33.
                                                                  II.............  4.3...............  A1, A8, B55,     151............  212............  241...........  15 kg.........  50 kg.........  B.............  13, 52, 148.
                                                                                                        B59, IB7, IP2,
                                                                                                        N34, T3, TP33.
 
                                                                                                              * * * * * * *
               Calcium cyanamide          4.3  UN1403...........  III............  4.3...............  A1, A19, IB8,    151............  213............  241...........  25 kg.........  100 kg........  A.............  13, 52, 148.
                with more than                                                                          IP4, T1, TP33.
                0.1 percent of
                calcium carbide.
 
                                                                                                              * * * * * * *
               Calcium hydride...         4.3  UN1404...........  I..............  4.3...............  A19, N40.......  None...........  211............  242...........  Forbidden.....  15 kg.........  E.............  13, 52, 148.
 
                                                                                                              * * * * * * *
               Calcium manganese          4.3  UN2844...........  III............  4.3...............  A1, A19, IB8,    151............  213............  241...........  25 kg.........  100 kg........  A.............  13, 52, 85,
                silicon.                                                                                IP4, T1, TP33.                                                                                                     103, 148.
 
                                                                                                              * * * * * * *
               Calcium peroxide..         5.1  UN1457...........  II.............  5.1...............  IB6, IP2, T3,    152............  212............  242...........  5 kg..........  25 kg.........  C.............  13, 52, 66,
                                                                                                        TP33.                                                                                                              75, 148.
               Calcium phosphide.         4.3  UN1360...........  I..............  4.3, 6.1..........  A8, A19, N40...  None...........  211............  242...........  Forbidden.....  15 kg.........  E.............  13, 40, 52,
                                                                                                                                                                                                                           85, 148.
               Calcium,                   4.2  UN1855...........  I..............  4.2...............  ...............  None...........  187............  None..........  Forbidden.....  Forbidden.....  D.............  13, 148.
                pyrophoric or
                Calcium alloys,
                pyrophoric.
 
                                                                                                              * * * * * * *
               Calcium silicide..         4.3  UN1405...........  II.............  4.3...............  A19, IB7, IP2,   151............  212............  241...........  15 kg.........  50 kg.........  B.............  13, 52, 85,
                                                                                                        T3, TP33.                                                                                                          103, 148.
                                                                  III............  4.3...............  A1, A19, IB8,    151............  213............  241...........  25 kg.........  100 kg........  B.............  13, 52, 85,
                                                                                                        IP4, T1, TP33.                                                                                                     103, 148.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


[[Page 50790]]


 
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
                                                                                                                                               (8)                                      (9)                            (10)
                    Hazardous                                                                                          -----------------------------------------------------------------------------------------------------------------
                    materials        Hazard                                                                Special                 Packaging Sec.   173.* * *             Quantity limitations (see Sec.          Vessel stowage
   Symbols      descriptions and    class or     Identification          PG            Label codes        provisions   --------------------------------------------------    Sec.   173.27 and 175.75)   -------------------------------
                 proper shipping    division          Nos.                                                  (Sec.                                                        --------------------------------
                      names                                                                                172.102)        Exceptions        Non-bulk          Bulk          Passenger    Cargo aircraft     Location          Other
                                                                                                                                                                           aircraft/rail       only
(1)            (2)...............         (3)  (4)..............  (5)............  (6)...............  (7)............  (8A)...........  (8B)...........  (8C)..........  (9A)..........  (9B)..........  (10A).........  (10B)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
                                                                                                              * * * * * * *
I............  Carbon, activated.         4.2  UN1362...........  III............  4.2...............  IB8, IP3, T1,    None...........  213............  241...........  0.5 kg........  0.5 kg........  A.............  12, 25.
                                                                                                        TP33.
I............  Carbon, animal or          4.2  UN1361...........  II.............  4.2...............  IB6, T3, TP33..  None...........  212............  242...........  Forbidden.....  Forbidden.....  A.............  12, 25.
                vegetable origin.
                                                                  III............  4.2...............  IB8, IP3, T1,    None...........  213............  241...........  Forbidden.....  Forbidden.....  A.............  12, 25.
                                                                                                        TP33.
 
                                                                                                              * * * * * * *
A W..........  Castor beans or              9  UN2969...........  II.............  None..............  IB8, IP2, IP4,   155............  204............  240...........  No limit......  No limit......  E.............  34, 40, 44,
                Castor meal or                                                                          T3, TP33.                                                                                                          122.
                Castor pomace or
                Castor flake.
 
                                                                                                              * * * * * * *
               Cerium, slabs,             4.1  UN1333...........  II.............  4.1...............  IB8, IP2, IP4,   None...........  212............  240...........  15 kg.........  50 kg.........  A.............  13, 66, 74,
                ingots, or rods.                                                                        N34.                                                                                                               91, 147, 148.
               Cerium, turnings           4.3  UN3078...........  II.............  4.3...............  A1, IB7, IP2,    151............  212............  242...........  15 kg.........  50 kg.........  E.............  13, 52, 148.
                or gritty powder.                                                                       T3, TP33.
               Cesium or Caesium.         4.3  UN1407...........  I..............  4.3...............  A7, A19, IB4,    None...........  211............  242...........  Forbidden.....  15 kg.........  D.............  13, 52, 148.
                                                                                                        IP1, N34, N40.
 
                                                                                                              * * * * * * *
+............  Chloroacetonitrile         6.1  UN2668...........  I..............  6.1, 3............  2, B9, B14,      None...........  227............  244...........  Forbidden.....  Forbidden.....  A.............  12, 25, 40,
                                                                                                        B32, IB9, T20,                                                                                                     52.
                                                                                                        TP2, TP13,
                                                                                                        TP38, TP45.
 
                                                                                                              * * * * * * *
               Chloroacetophenone         6.1  UN3416...........  II.............  6.1...............  A3, IB2, N12,    None...........  202............  243...........  Forbidden.....  60 L..........  D.............  12, 25, 40.
                , liquid, (CN).                                                                         N32, N33, T7,
                                                                                                        TP2, TP13.
               Chloroacetophenone         6.1  UN1697...........  II.............  6.1...............  A3, IB8, IP2,    None...........  212............  None..........  Forbidden.....  100 kg........  D.............  12, 25, 40.
                , solid, (CN).                                                                          IP4, N12, N32,
                                                                                                        N33, N34, T3,
                                                                                                        TP2, TP13,
                                                                                                        TP33.
 
                                                                                                              * * * * * * *
               Chlorocresols              6.1  UN2669...........  II.............  6.1...............  IB2, T7, TP2...  153............  202............  243...........  5 L...........  60 L..........  A.............  12, 25.
                solution.

[[Page 50791]]

 
                                                                  III............  6.1...............  IB3, T7, TP2...  153............  203............  241...........  60 L..........  220 L.........  A.............  12, 25.
               Chlorocresols,             6.1  UN3437...........  II.............  6.1...............  IB8, IP2, IP4,   153............  212............  242...........  25 kg.........  100 kg........  A.............  12, 25.
                solid.                                                                                  T3, TP33.
 
                                                                                                              * * * * * * *
               Chloromethyl               6.1  UN2745...........  II.............  6.1, 8............  IB2, T7, TP2,    153............  202............  243...........  1 L...........  30 L..........  A.............  12, 13, 25,
                chloroformate.                                                                          TP13.                                                                                                              40.
 
                                                                                                              * * * * * * *
               Chloronitrobenzene         6.1  UN3409...........  II.............  6.1...............  IB2, T7, TP2...  153............  202............  243...........  5 L...........  60 L..........  A.............  44, 89, 100,
                s, liquid.                                                                                                                                                                                                 141.
 
                                                                                                              * * * * * * *
               Chlorosilanes,             4.3  UN2988...........  I..............  4.3, 3, 8.........  A2, T14, TP2,    None...........  201............  244...........  Forbidden.....  1 L...........  D.............  13, 21, 28,
                water-reactive,                                                                         TP7, TP13.                                                                                                         40, 49, 100,
                flammable,                                                                                                                                                                                                 147, 148.
                corrosive, n.o.s.
 
                                                                                                              * * * * * * *
G............  Corrosive liquids,           8  UN3094...........  I..............  8, 4.3............  A6, A7.........  None...........  201............  243...........  Forbidden.....  1 L...........  E.............  13, 148.
                water-reactive,
                n.o.s.
                                                                  II.............  8, 4.3............  A6, A7.........  None...........  202............  243...........  1 L...........  5 L...........  E.............  13, 148.
 
                                                                                                              * * * * * * *
G............  Corrosive solids,            8  UN2923...........  I..............  8, 6.1............  IB7, T6, TP33..  None...........  211............  242...........  1 kg..........  25 kg.........  B.............  40.
                toxic, n.o.s.
                                                                  II.............  8, 6.1............  IB8, IP2, IP4,   154............  212............  240...........  15 kg.........  50 kg.........  B.............  40.
                                                                                                        T3, TP33.
                                                                  III............  8, 6.1............  IB8, IP3, T1,    154............  213............  240...........  25 kg.........  100 kg........  B.............  40.
                                                                                                        TP33.
G............  Corrosive solids,            8  UN3096...........  I..............  8, 4.3............  IB4, IP1, T6,    None...........  211............  243...........  1 kg..........  25 kg.........  D.............  13, 148.
                water-reactive,                                                                         TP33.
                n.o.s.
                                                                  II.............  8, 6.1............  IB8, IP2, IP4,   154............  212............  240...........  15 kg.........  50 kg.........  B.............  13, 40, 148.
                                                                                                        T3, TP33.
                                                                  III............  8, 6.1............  IB8, IP3, T1,    154............  213............  240...........  25 kg.........  100 kg........  B.............  13, 40, 95,
                                                                                                        TP33.                                                                                                              148.
 
                                                                                                              * * * * * * *
               Crotonic acid,               8  UN3472...........  III............  8.................  IB8, T1........  154............  203............  241...........  5 L...........  60 L..........  A.............  12, 25.
                liquid.
               Crotonic acid,               8  UN2823...........  III............  8.................  IB8, IP3, T1,    154............  213............  240...........  25 kg.........  100 kg........  A.............  12, 25.
                solid.                                                                                  TP33.
 
                                                                                                              * * * * * * *
               Cyanogen bromide..         6.1  UN1889...........  I..............  6.1, 8............  A6, A8, T6,      None...........  211............  242...........  1 kg..........  15 kg.........  D.............  40, 52.
                                                                                                        TP33.
 
                                                                                                              * * * * * * *
               Cyanuric chloride.           8  UN2670...........  II.............  8.................  IB8, IP2, IP4,   None...........  212............  240...........  15 kg.........  50 kg.........  A.............  12, 25, 40.
                                                                                                        T3, TP33.
 
                                                                                                              * * * * * * *
               Cyclohexyl                   3  UN3054...........  III............  3.................  B1, IB3, T2,     150............  203............  242...........  60 L..........  220 L.........  A.............  40, 95, 102.
                mercaptan.                                                                              TP1.
 
                                                                                                              * * * * * * *
               1,1-Dichloro-1-            6.1  UN2650...........  II.............  6.1...............  IB2, T7, TP2...  153............  202............  243...........  5 L...........  60 L..........  A.............  12, 25, 40,
                nitroethane.                                                                                                                                                                                               74.
 

[[Page 50792]]

 
                                                                                                              * * * * * * *
               1,3-                       6.1  UN2649...........  II.............  6.1...............  IB8, IP2, IP4,   153............  212............  242...........  25 kg.........  100 kg........  B.............  12, 25, 40.
                Dichloroacetone.                                                                        T3, TP33.
 
                                                                                                              * * * * * * *
               1,3-                       6.1  UN2750...........  II.............  6.1...............  IB2, T7, TP2...  153............  202............  243...........  5 L...........  60 L..........  A.............  12, 25, 40.
                Dichloropropanol-
                2.
 
                                                                                                              * * * * * * *
               Diethylthiophospho           8  UN2751...........  II.............  8.................  B2, IB2, T7,     None...........  212............  240...........  15 kg.........  50 kg.........  D.............  12,25, 40.
                ryl chloride.                                                                           TP2.
 
                                                                                                              * * * * * * *
               Dipicryl sulfide,          4.1  UN2852...........  I..............  4.1...............  162, A2, N41,    None...........  211............  None..........  Forbidden.....  0.5 kg........  D.............  28, 36.
                wetted with not                                                                         N84.
                less than 10
                percent water, by
                mass.
               2-Ethylhexyl               6.1  UN2748...........  II.............  6.1, 8............  IB2, T7, TP2,    153............  202............  243...........  1 L...........  30 L..........  A.............  12, 13, 25,
                chloroformate.                                                                          TP13.                                                                                                              40.
 
                                                                                                              * * * * * * *
               Ferrocerium.......         4.1  UN1323...........  II.............  4.1...............  59, A19, IB8,    151............  212............  240...........  15 kg.........  50 kg.........  A.............  13, 147, 148.
                                                                                                        IP2, IP4, T3,
                                                                                                        TP33.
               Ferrosilicon with          4.3  UN1408...........  III............  4.3, 6.1..........  A1, A19, B6,     151............  213............  240...........  25 kg.........  100 kg........  A.............  13, 40, 52,
                30 percent or                                                                           IB8, IP4, IP7,                                                                                                     53, 85, 103,
                more but less                                                                           T1, TP33.                                                                                                          148.
                than 90 percent
                silicon.
 
                                                                                                              * * * * * * *
               Ferrous metal              4.2  UN2793...........  III............  4.2...............  A1, A19, IB8,    None...........  213............  241...........  25 kg.........  100 kg........  A.............  13, 148.
                borings or                                                                              IP3, IP7.
                Ferrous metal
                shavings or
                Ferrous metal
                turnings or
                Ferrous metal
                cuttings in a
                form liable to
                self-heating.
 
                                                                                                              * * * * * * *
               Fuel cell                  4.3  UN3476...........  ...............  4.3...............  328............  230............  230............  230...........  5 kg..........  50 kg.........  A.............  13, 148.
                cartridges or
                Fuel cell
                cartridges
                contained in
                equipment or Fuel
                cell cartridges
                packed with
                equipment,
                containing water-
                reactive
                substances.
 
                                                                                                              * * * * * * *
               Hafnium powder,            4.2  UN2545...........  I..............  4.2...............  ...............  None...........  211............  242...........  Forbidden.....  Forbidden.....  D.............  13, 148.
                dry.

[[Page 50793]]

 
                                                                  II.............  4.2...............  A19, A20, IB6,   None...........  212............  241...........  15 kg.........  50 kg.........  D.............  13, 148.
                                                                                                        IP2, N34, T3,
                                                                                                        TP33.
                                                                  III............  4.2...............  IB8, IP3, T1,    None...........  213............  241...........  25 kg.........  100 kg........  D.............  13,148.
                                                                                                        TP33.
 
                                                                                                              * * * * * * *
               Hexachlorocyclopen         6.1  UN2646...........  I..............  6.1...............  2, B9, B14,      None...........  227............  244...........  Forbidden.....  Forbidden.....  D.............  25, 40.
                tadiene.                                                                                B32, B77, T20,
                                                                                                        TP2, TP13,
                                                                                                        TP38, TP45.
 
                                                                                                              * * * * * * *
               Hexamethylenediami           8  UN2280...........  III............  8.................  IB8, IP3, T1,    154............  213............  240...........  25 kg.........  100 kg........  A.............  12, 25.
                ne, solid.                                                                              TP33.
 
                                                                                                              * * * * * * *
               Hydrofluoric acid,           8  UN1790...........  I..............  8, 6.1............  A6, A7, B4,      None...........  201............  243...........  0.5 L.........  2.5 L.........  D.............  12, 25, 40.
                with more than 60                                                                       B15, B23, N5,
                percent strength.                                                                       N34, T10, TP2,
                                                                                                        TP13.
               Hydrofluoric acid,           8  UN1790...........  II.............  8, 6.1............  A6, A7, B15,     154............  202............  243...........  1 L...........  30 L..........  D.............  12, 25, 40.
                with not more                                                                           IB2, N5, N34,
                than 60 percent                                                                         T8, TP2.
                strength.
 
                                                                                                              * * * * * * *
               Hydrogen,                  2.1  UN1966...........  ...............  2.1...............  T75, TP5.......  None...........  316............  318, 319......  Forbidden.....  Forbidden.....  D.............  40, 57.
                refrigerated
                liquid (cryogenic
                liquid).
 
                                                                                                              * * * * * * *
G............  Hypochlorites,             5.1  UN3212...........  II.............  5.1...............  349, A9, IB8,    152............  212............  240...........  5 kg..........  25 kg.........  D.............  4, 25, 52, 56,
                inorganic, n.o.s.                                                                       IP2, IP4, T3,                                                                                                      58, 69, 116,
                                                                                                        TP33.                                                                                                              118.
 
                                                                                                              * * * * * * *
               Iron oxide, spent,         4.2  UN1376...........  III............  4.2...............  B18, IB8, IP3,   None...........  213............  240...........  Forbidden.....  Forbidden.....  E.............  13, 148.
                or Iron sponge,                                                                         T1, TP33.
                spent obtained
                from coal gas
                purification.
 
                                                                                                              * * * * * * *
               Isopropyl                  6.1  UN2407...........  I..............  6.1, 3, 8.........  2, B9, B14,      None...........  227............  244...........  Forbidden.....  Forbidden.....  B.............  21, 40, 100.
                chloroformate.                                                                          B32, B77, T20,
                                                                                                        TP2, TP13,
                                                                                                        TP38, TP44.
 
                                                                                                              * * * * * * *
               Krill meal........         4.2  UN3497...........  II.............  4.2...............  155, IB6, IP2,   None...........  212............  242...........  15 kg.........  50 kg.........  B.............  25, 88, 128.
                                                                                                        T3, TP33.

[[Page 50794]]

 
                                                                  III............  4.2...............  155, IB8, IP3,   None...........  213............  242...........  25 kg.........  100 kg........  A.............  128.
                                                                                                        T1, TP33.
 
                                                                                                              * * * * * * *
               Life-saving                  9  UN3072...........  ...............  None..............  134............  None...........  219............  None..........  No limit......  No limit......  A.............  122.
                appliances, not
                self inflating
                containing
                dangerous goods
                as equipment.
               Life-saving                  9  UN2990...........  ...............  None..............  ...............  None...........  219............  None..........  No limit......  No limit......  A.............  122.
                appliances, self
                inflating.
 
                                                                                                              * * * * * * *
               Lithium...........         4.3  UN1415...........  I..............  4.3...............  A7, A19, IB4,    None...........  211............  244...........  Forbidden.....  15 kg.........  E.............  13, 52, 148.
                                                                                                        IP1, N45.
 
                                                                                                              * * * * * * *
               Lithium aluminum           4.3  UN1410...........  I..............  4.3...............  A19............  None...........  211............  242...........  Forbidden.....  15 kg.........  E.............  13, 52, 148.
                hydride.
               Lithium aluminum           4.3  UN1411...........  I..............  4.3, 3............  A2, A3, A11,     None...........  201............  244...........  Forbidden.....  1 L...........  D.............  13,40, 148.
                hydride, ethereal.                                                                      N34.
 
                                                                                                              * * * * * * *
               Lithium                    4.3  UN1413...........  I..............  4.3...............  A19, N40.......  None...........  211............  242...........  Forbidden.....  15 kg.........  E.............  13,52, 148.
                borohydride.
               Lithium                    4.3  UN2830...........  II.............  4.3...............  A19, IB7, IP2,   151............  212............  241...........  15 kg.........  50 kg.........  E.............  13, 40, 85,
                ferrosilicon.                                                                           T3, TP33.                                                                                                          103, 148.
               Lithium ion                  9  UN3480...........  ...............  9.................  A51............  185............  185............  185...........  5 kg..........  35 kg.........  A.............
                batteries
                including lithium
                ion polymer
                batteries.
               Lithium ion                  9  UN3481...........  ...............  9.................  A54............  185............  185............  185...........  5 kg..........  35 kg.........  A.............
                batteries
                contained in
                equipment
                including lithium
                ion polymer
                batteries.
               Lithium ion                  9  UN3481...........  ...............  9.................  A54............  185............  185............  185...........  5 kg..........  35 kg.........  A.............
                batteries packed
                with equipment
                including lithium
                ion polymer
                batteries.
               Lithium metal                9  UN3090...........  ...............  9.................  ...............  185............  185............  185...........  Forbidden.....  35 kg.........  A.............
                batteries
                including lithium
                alloy batteries.
               Lithium metal                9  UN3091...........  ...............  9.................  A54, A101......  185............  185............  185...........  5 kg..........  35 kg.........  A.............
                batteries
                contained in
                equipment
                including lithium
                alloy batteries.
               Lithium metal                9  UN3091...........  ...............  9.................  A54............  185............  185............  185...........  5 kg..........  35 kg.........  A.............
                batteries packed
                with equipment
                including lithium
                alloy batteries.
 
                                                                                                              * * * * * * *
               Lithium hydride...         4.3  UN1414...........  I..............  4.3...............  A19, N40.......  None...........  211............  242...........  Forbidden.....  15 kg.........  E.............  13, 52, 148.

[[Page 50795]]

 
               Lithium hydride,           4.3  UN2805...........  II.............  4.3...............  A8, A19, A20,    151............  212............  241...........  15 kg.........  50 kg.........  E.............  13, 52, 148.
                fused solid.                                                                            IB4, T3, TP33.
 
                                                                                                              * * * * * * *
               Lithium peroxide..         5.1  UN1472...........  II.............  5.1...............  A9, IB6, IP2,    152............  212............  None..........  5 kg..........  25 kg.........  C.............  13, 52, 66,
                                                                                                        N34, T3, TP33.                                                                                                     75, 148.
 
                                                                                                              * * * * * * *
               Lithium silicon...         4.3  UN1417...........  II.............  4.3...............  A19, A20, IB7,   151............  212............  241...........  15 kg.........  50 kg.........  A.............  13, 85, 103,
                                                                                                        IP2, T3, TP33.                                                                                                     148.
 
                                                                                                              * * * * * * *
               Magnesium aluminum         4.3  UN1419...........  I..............  4.3, 6.1..........  A19, N34, N40..  None...........  211............  242...........  Forbidden.....  15 kg.........  E.............  13, 40, 52,
                phosphide.                                                                                                                                                                                                 85, 148.
 
                                                                                                              * * * * * * *
               Magnesium diamide.         4.2  UN2004...........  II.............  4.2...............  A8, A19, A20,    None...........  212............  241...........  15 kg.........  50 kg.........  C.............  13, 148.
                                                                                                        IB6, T3, TP33.
 
                                                                                                              * * * * * * *
               Magnesium                  4.3  UN2950...........  III............  4.3...............  A1, A19, IB8,    151............  213............  240...........  25 kg.........  100 kg........  A.............  13, 52, 148.
                granules, coated,                                                                       IP4, T1, TP33.
                particle size not
                less than 149
                microns.
               Magnesium hydride.         4.3  UN2010...........  I..............  4.3...............  A19, N40.......  None...........  211............  242...........  Forbidden.....  15 kg.........  E.............  13, 52, 148.
               Magnesium or               4.1  UN1869...........  III............  4.1...............  A1, IB8, IP3,    151............  213............  240...........  25 kg.........  100 kg........  A.............  13, 39, 52,
                Magnesium alloys                                                                        T1, TP33.                                                                                                          53, 74, 101,
                with more than 50                                                                                                                                                                                          147, 148.
                percent magnesium
                in pellets,
                turnings or
                ribbons.
 
                                                                                                              * * * * * * *
               Magnesium peroxide         5.1  UN1476...........  II.............  5.1...............  IB6, IP2, T3,    152............  212............  242...........  5 kg..........  25 kg.........  C.............  13, 52, 66,
                                                                                                        TP33.                                                                                                              75, 148.
               Magnesium                  4.3  UN2011...........  I..............  4.3, 6.1..........  A19, N40.......  None...........  211............  None..........  Forbidden.....  15 kg.........  E.............  13, 40, 52,
                phosphide.                                                                                                                                                                                                 85, 148.
               Magnesium, powder          4.3  UN1418...........  I..............  4.3, 4.2..........  A19, B56.......  None...........  211............  244...........  Forbidden.....  15 kg.........  A.............  13, 39, 52,
                or Magnesium                                                                                                                                                                                               148.
                alloys, powder.
                                                                  II.............  4.3, 4.2..........  A19, B56, IB5,   None...........  212............  241...........  15 kg.........  50 kg.........  A.............  13, 39, 52,
                                                                                                        IP2, T3, TP33.                                                                                                     148.
                                                                  III............  4.3, 4.2..........  A19, B56, IB8,   None...........  213............  241...........  25 kg.........  100 kg........  A.............  13, 39, 52,
                                                                                                        IP4, T1, TP33.                                                                                                     148.
 
                                                                                                              * * * * * * *
               Magnesium silicide         4.3  UN2624...........  II.............  4.3...............  A19, A20, IB7,   151............  212............  241...........  15 kg.........  50 kg.........  B.............  13, 85, 103,
                                                                                                        IP2, T3, TP33.                                                                                                     148.
 
                                                                                                              * * * * * * *
               Maleic anhydride..           8  UN2215...........  III............  8.................  IB8, IP3, T1,    154............  213............  240...........  25 kg.........  100 kg........  A.............  95, 102.
                                                                                                        TP33.
               Maleic anhydride,            8  UN2215...........  III............  8.................  T4, TP3........  None...........  213............  240...........  Forbidden.....  Forbidden.....  A.............  95, 102.
                molten.
               Malononitrile.....         6.1  UN2647...........  II.............  6.1...............  IB8, IP2, IP4,   153............  212............  242...........  25 kg.........  100 kg........  A.............  12, 25.
                                                                                                        T3, TP33.

[[Page 50796]]

 
               Maneb or Maneb             4.2  UN2210...........  III............  4.2, 4.3..........  57, A1, A19,     None...........  213............  242...........  25 kg.........  100 kg........  A.............  13, 34, 148.
                preparations with                                                                       IB6, T1, TP33.
                not less than 60
                percent maneb.
               Maneb stabilized           4.3  UN2968...........  III............  4.3...............  54, A1, A19,     151............  213............  242...........  25 kg.........  100 kg........  B.............  13, 34, 52,
                or Maneb                                                                                IB8, IP4, T1,                                                                                                      148.
                preparations,                                                                           TP33.
                stabilized
                against self-
                heating.
 
                                                                                                              * * * * * * *
               Mercaptans,                  3  UN3336...........  I..............  3.................  T11, TP2.......  150............  201............  243...........  1 L...........  30 L..........  E.............  95, 102.
                liquid,
                flammable, n.o.s
                or Mercaptan
                mixture, liquid,
                flammable, n.o.s.
                                                                  II.............  3.................  IB2, T7, TP1,    150............  202............  242...........  5 L...........  60 L..........  B.............  95, 102.
                                                                                                        TP8, TP28.
                                                                  III............  3.................  B1, B52, IB3,    150............  203............  241...........  60 L..........  220 L.........  B.............  95, 102.
                                                                                                        T4, TP1, TP29.
               Mercaptans,                  3  UN1228...........  II.............  3, 6.1............  IB2, T11, TP2,   None...........  202............  243...........  Forbidden.....  60 L..........  B.............  40, 95, 102.
                liquid,                                                                                 TP27.
                flammable, toxic,
                n.o.s. or
                Mercaptan
                mixtures, liquid,
                flammable, toxic,
                n.o.s.
                                                                  III............  3, 6.1............  A6, B1, IB3,     150............  203............  242...........  5 L...........  220 L.........  A.............  40, 95, 102.
                                                                                                        T7, TP1, TP28.
               Mercaptans,                6.1  UN3071...........  II.............  6.1, 3............  A6, IB2, T11,    153............  202............  243...........  5 L...........  60 L..........  C.............  40, 102, 121.
                liquid, toxic,                                                                          TP2, TP13,
                flammable, n.o.s.                                                                       TP27.
                or Mercaptan
                mixtures, liquid,
                toxic, flammable,
                n.o.s., flash
                point not less
                than 23 degrees C.
 
                                                                                                              * * * * * * *
A W..........  Mercury contained            8  UN3506...........  ...............  8, 6.1............  A191...........  164............  None...........  None..........  No limit......  No limit......  B.............  40, 97.
                in manufactured
                articles.
 
                                                                                                              * * * * * * *
G............  Metal catalyst,            4.2  UN2881...........  I..............  4.2...............  N34, T21, TP7,   None...........  187............  None..........  Forbidden.....  Forbidden.....  C.............  13, 147, 148.
                dry.                                                                                    TP33.
                                                                  II.............  4.2...............  IB6, IP2, N34,   None...........  187............  242...........  Forbidden.....  50 kg.........  C.............  13, 147, 148.
                                                                                                        T3, TP33.

[[Page 50797]]

 
                                                                  III............  4.2...............  IB8, IP3, N34,   None...........  187............  241...........  25 kg.........  100 kg........  C.............  13, 147, 148.
                                                                                                        T1, TP33.
 
                                                                                                              * * * * * * *
               Metal hydrides,            4.3  UN1409...........  I..............  4.3...............  A19, N34, N40..  None...........  211............  242...........  Forbidden.....  15 kg.........  D.............  13, 52, 148.
                water reactive,
                n.o.s.
                                                                  II.............  4.3...............  A19, IB4, N34,   151............  212............  242...........  15 kg.........  50 kg.........  D.............  13, 52, 148.
                                                                                                        N40, T3, TP33.
 
                                                                                                              * * * * * * *
               Metal powder, self-        4.2  UN3189...........  II.............  4.2...............  IB6, IP2, T3,    None...........  212............  241...........  15 kg.........  50 kg.........  C.............  13, 148.
                heating, n.o.s.                                                                         TP33.
                                                                  III............  4.2...............  IB8, IP3, T1,    None...........  213............  241...........  25 kg.........  100 kg........  C.............  13, 148.
                                                                                                        TP33.
               Metal powders,             4.1  UN3089...........  II.............  4.1...............  IB8, IP2, IP4,   151............  212............  240...........  15 kg.........  50 kg.........  B.............  13, 74, 147,
                flammable, n.o.s.                                                                       T3, TP33.                                                                                                          148.
                                                                  III............  4.1...............  IB8, IP2, IP4,   151............  213............  240...........  25 kg.........  100 kg........  B.............  13, 74, 147,
                                                                                                        T1, TP33.                                                                                                          148.
G............  Metallic                   4.3  UN3208...........  I..............  4.3...............  A7, IB4........  None...........  211............  242...........  Forbidden.....  15 kg.........  E.............  13, 40, 148.
                substance, water-
                reactive, n.o.s.
                                                                  II.............  4.3...............  A7, IB7, IP2,    151............  212............  242...........  15 kg.........  50 kg.........  E.............  13, 40, 148.
                                                                                                        T3, TP33.
                                                                  III............  4.3...............  A7, IB8, IP4,    151............  213............  241...........  25 kg.........  100 kg........  E.............  13, 40, 148.
                                                                                                        T1, TP33.
G............  Metallic                   4.3  UN3209...........  I..............  4.3, 4.2..........  A7.............  None...........  211............  242...........  Forbidden.....  15 kg.........  E.............  13, 40, 148.
                substance, water-
                reactive, self-
                heating, n.o.s.
                                                                  II.............  4.3, 4.2..........  A7, IB5, IP2,    None...........  212............  242...........  15 kg.........  50 kg.........  E.............  13, 40, 148.
                                                                                                        T3, TP33.
                                                                  III............  4.3, 4.2..........  A7, IB8, IP4,    None...........  213............  242...........  25 kg.........  100 kg........  E.............  13, 40, 148.
                                                                                                        T1, TP33.
 
                                                                                                              * * * * * * *
               Methyl iodide.....         6.1  UN2644...........  I..............  6.1...............  2, B9, B14,      None...........  227............  244...........  Forbidden.....  Forbidden.....  D.............  12, 25, 40.
                                                                                                        B32, T20, TP2,
                                                                                                        TP13, TP38,
                                                                                                        TP45.
 
                                                                                                              * * * * * * *
               Methyl magnesium           4.3  UN1928...........  I..............  4.3, 3............  ...............  None...........  201............  243...........  Forbidden.....  1 L...........  D.............  13, 148.
                bromide, in ethyl
                ether.
 
                                                                                                              * * * * * * *
               Methyl vinyl               6.1  UN1251...........  I..............  6.1, 3, 8.........  1, B9, B14,      None...........  226............  244...........  Forbidden.....  Forbidden.....  B.............  21, 40, 100.
                ketone,                                                                                 B30, T22, TP2,
                stabilized.                                                                             TP13, TP38,
                                                                                                        TP44.
 

[[Page 50798]]

 
                                                                                                              * * * * * * *
G............  Organic peroxide           5.2  UN3101...........  II.............  5.2, 1............  53.............  152............  225............  None..........  Forbidden.....  Forbidden.....  D.............  12, 25, 52,
                type B, liquid.                                                                                                                                                                                            53.
G............  Organic peroxide           5.2  UN3111...........  II.............  5.2, 1............  53.............  None...........  225............  None..........  Forbidden.....  Forbidden.....  D.............  2, 25, 52, 53.
                type B, liquid,
                temperature
                controlled.
G............  Organic peroxide           5.2  UN3102...........  II.............  5.2, 1............  53.............  152............  225............  None..........  Forbidden.....  Forbidden.....  D.............  12, 25, 52,
                type B, solid.                                                                                                                                                                                             53.
G............  Organic peroxide           5.2  UN3112...........  II.............  5.2, 1............  53.............  None...........  225............  None..........  Forbidden.....  Forbidden.....  D.............  2, 25, 52, 53.
                type B, solid,
                temperature
                controlled.
G............  Organic peroxide           5.2  UN3103...........  II.............  5.2...............  ...............  152............  225............  None..........  5 L...........  10 L..........  D.............  12, 25, 52,
                type C, liquid.                                                                                                                                                                                            53.
G............  Organic peroxide           5.2  UN3113...........  II.............  5.2...............  ...............  None...........  225............  None..........  Forbidden.....  Forbidden.....  D.............  2, 25, 52, 53.
                type C, liquid,
                temperature
                controlled.
G............  Organic peroxide           5.2  UN3104...........  II.............  5.2...............  ...............  152............  225............  None..........  5 kg..........  10 kg.........  D.............  12, 25, 52,
                type C, solid.                                                                                                                                                                                             53.
G............  Organic peroxide           5.2  UN3114...........  II.............  5.2...............  ...............  None...........  225............  None..........  Forbidden.....  Forbidden.....  D.............  2, 25, 52, 53.
                type C, solid,
                temperature
                controlled.
G............  Organic peroxide           5.2  UN3105...........  II.............  5.2...............  ...............  152............  225............  None..........  5 L...........  10 L..........  D.............  12, 25, 52,
                type D, liquid.                                                                                                                                                                                            53.
G............  Organic peroxide           5.2  UN3115...........  II.............  5.2...............  ...............  None...........  225............  None..........  Forbidden.....  Forbidden.....  D.............  2, 25, 52, 53.
                type D, liquid,
                temperature
                controlled.
G............  Organic peroxide           5.2  UN3106...........  II.............  5.2...............  ...............  152............  225............  None..........  5 kg..........  10 kg.........  D.............  12, 25, 52,
                type D, solid.                                                                                                                                                                                             53.
G............  Organic peroxide           5.2  UN3116...........  II.............  5.2...............  ...............  None...........  225............  None..........  Forbidden.....  Forbidden.....  D.............  2, 25, 52, 53.
                type D, solid,
                temperature
                controlled.
G............  Organic peroxide           5.2  UN3107...........  II.............  5.2...............  A61............  152............  225............  None..........  10 L..........  25 L..........  D.............  12, 40, 52,
                type E, liquid.                                                                                                                                                                                            53.
G............  Organic peroxide           5.2  UN3117...........  II.............  5.2...............  ...............  None...........  225............  None..........  Forbidden.....  Forbidden.....  D.............  2, 25, 52, 53.
                type E, liquid,
                temperature
                controlled.
G............  Organic peroxide           5.2  UN3108...........  II.............  5.2...............  ...............  152............  225............  None..........  10 kg.........  25 kg.........  D.............  12, 25, 52,
                type E, solid.                                                                                                                                                                                             53.
G............  Organic peroxide           5.2  UN3118...........  II.............  5.2...............  ...............  None...........  225............  None..........  Forbidden.....  Forbidden.....  D.............  2, 25, 52, 53.
                type E, solid,
                temperature
                controlled.
G............  Organic peroxide           5.2  UN3109...........  II.............  5.2...............  A61, IP5.......  152............  225............  225...........  10 L..........  25 L..........  D.............  12, 25, 52,
                type F, liquid.                                                                                                                                                                                            53.
G............  Organic peroxide           5.2  UN3119...........  II.............  5.2...............  IP5............  None...........  225............  225...........  Forbidden.....  Forbidden.....  D.............  2, 25, 52, 53.
                type F, liquid,
                temperature
                controlled.
G............  Organic peroxide           5.2  UN3110...........  II.............  5.2...............  TP33...........  152............  225............  225...........  10 kg.........  25 kg.........  D.............  12, 25, 52,
                type F, solid.                                                                                                                                                                                             53.
G............  Organic peroxide           5.2  UN3120...........  II.............  5.2...............  TP33...........  None...........  225............  225...........  Forbidden.....  Forbidden.....  D.............  2, 25, 52, 53.
                type F, solid,
                temperature
                controlled.
 

[[Page 50799]]

 
                                                                                                              * * * * * * *
G............  Organometallic             4.2  UN3392...........  I..............  4.2...............  B11, T21, TP2,   None...........  181............  244...........  Forbidden.....  Forbidden.....  D.............  13, 78, 148.
                substance,                                                                              TP7, TP36.
                liquid,
                pyrophoric.
G............  Organometallic             4.2  UN3394...........  I..............  4.2, 4.3..........  B11, T21, TP2,   None...........  181............  244...........  Forbidden.....  Forbidden.....  D.............  13, 52, 78,
                substance,                                                                              TP7, TP36,                                                                                                         148.
                liquid,                                                                                 TP47.
                pyrophoric, water-
                reactive.
G............  Organometallic             4.3  UN3398...........  I..............  4.3...............  T13, TP2, TP7,   None...........  201............  244...........  Forbidden.....  1 L...........  E.............  13, 40, 52,
                substance,                                                                              TP36, TP47.                                                                                                        148.
                liquid, water-
                reactive.
                                                                  II.............  4.3, 3............  IB1, IP2, T7,    None...........  202............  243...........  1 L...........  5 L...........  D.............  13, 40, 52,
                                                                                                        TP2, TP7,                                                                                                          148.
                                                                                                        TP36, TP47.
                                                                  III............  4.3, 3............  IB2, IP4, T7,    None...........  203............  242...........  5 L...........  60 L..........  E.............  13, 40, 52,
                                                                                                        TP2, TP7,                                                                                                          148.
                                                                                                        TP36, TP47.
G............  Organometallic             4.3  UN3399...........  I..............  4.3, 3............  T13, TP2, TP7,   None...........  201............  244...........  Forbidden.....  1 L...........  D.............  13, 40, 52,
                substance,                                                                              TP36, TP47.                                                                                                        148.
                liquid, water-
                reactive,
                flammable.
                                                                  II.............  4.3, 3............  IB1, IP2, T7,    None...........  202............  243...........  1 L...........  5 L...........  D.............  13, 40, 52,
                                                                                                        TP2, TP7,                                                                                                          148.
                                                                                                        TP36, TP47.
                                                                  III............  4.3, 3............  IB2, IP4, T7,    None...........  203............  242...........  5 L...........  60 L..........  E.............  13, 40, 52,
                                                                                                        TP2, TP7,                                                                                                          148.
                                                                                                        TP36, TP47.
G............  Organometallic             4.2  UN3391...........  I..............  4.2...............  T21, TP7, TP33,  None...........  187............  244...........  Forbidden.....  Forbidden.....  D.............  13, 148.
                substance, solid,                                                                       TP36.
                pyrophoric.
G............  Organometallic             4.2  UN3393...........  I..............  4.2, 4.3..........  B11, T21, TP7,   None...........  187............  244...........  Forbidden.....  Forbidden.....  D.............  13, 52, 148.
                substance, solid,                                                                       TP33, TP36,
                pyrophoric, water-                                                                      TP47.
                reactive.
 
                                                                                                              * * * * * * *
G............  Organometallic             4.3  UN3395...........  I..............  4.3...............  N40, T9, TP7,    None...........  211............  242...........  Forbidden.....  15 kg.........  E.............  13, 40, 52,
                substance, solid,                                                                       TP33, TP36,                                                                                                        148.
                water-reactive.                                                                         TP47.
                                                                  II.............  4.3...............  IB4, T3, TP33,   151............  212............  242...........  15 kg.........  50 kg.........  E.............  13, 40, 52,
                                                                                                        TP36, TP47.                                                                                                        148.
                                                                  III............  4.3...............  IB6, T1, TP33,   151............  213............  241...........  25 kg.........  100 kg........  E.............  13, 40, 52,
                                                                                                        TP36, TP47.                                                                                                        148.

[[Page 50800]]

 
G............  Organometallic             4.3  UN3396...........  I..............  4.3, 4.1..........  N40, T9, TP7,    None...........  211............  242...........  Forbidden.....  15 kg.........  E.............  13, 40, 52,
                substance, solid,                                                                       TP33, TP36,                                                                                                        148.
                water-reactive,                                                                         TP47.
                flammable.
                                                                  II.............  4.3, 4.1..........  IB4, T3, TP33,   151............  212............  242...........  15 kg.........  50 kg.........  E.............  13, 40, 52,
                                                                                                        TP36, TP47.                                                                                                        148.
                                                                  III............  4.3, 4.1..........  IB6, T1, TP33,   151............  213............  241...........  25 kg.........  100 kg........  E.............  13, 40, 52,
                                                                                                        TP36, TP47.                                                                                                        148.
G............  Organometallic             4.3  UN3397...........  I..............  4.3, 4.2..........  N40, T9, TP7,    None...........  211............  242...........  Forbidden.....  15 kg.........  E.............  13, 40, 52,
                substance, solid,                                                                       TP33, TP36,                                                                                                        148.
                water-reactive,                                                                         TP47.
                self-heating.
                                                                  II.............  4.3, 4.2..........  IB4, T3, TP33,   None...........  212............  242...........  15 kg.........  50 kg.........  E.............  13, 40, 52,
                                                                                                        TP36, TP47.                                                                                                        148.
                                                                  III............  4.3, 4.2..........  IB6, T1, TP33,   None...........  213............  241...........  25 kg.........  100 kg........  E.............  13, 40, 52,
                                                                                                        TP36, TP47.                                                                                                        148.
 
                                                                                                              * * * * * * *
G............  Oxidizing liquid,          5.1  UN3098...........  I..............  5.1, 8............  62, A6.........  None...........  201............  244...........  Forbidden.....  2.5 L.........  D.............  13, 56, 58,
                corrosive, n.o.s.                                                                                                                                                                                          138.
                                                                  II.............  5.1, 8............  62, IB1........  None...........  202............  243...........  1 L...........  5 L...........  B.............  13, 56, 58,
                                                                                                                                                                                                                           138.
                                                                  III............  5.1, 8............  62, IB2........  152............  203............  242...........  2.5 L.........  30 L..........  B.............  13, 56, 58,
                                                                                                                                                                                                                           138.
G............  Oxidizing liquid,          5.1  UN3139...........  I..............  5.1...............  62, 127, A2, A6  None...........  201............  243...........  Forbidden.....  2.5 L.........  D.............  56, 58, 138.
                n.o.s.
                                                                  II.............  5.1...............  62, 127, A2,     152............  202............  242...........  1 L...........  5 L...........  B.............  56, 58, 138.
                                                                                                        IB2.
                                                                  III............  5.1...............  62, 127, A2,     152............  203............  241...........  2.5 L.........  30 L..........  B.............  56, 58, 138.
                                                                                                        IB2.
G............  Oxidizing liquid,          5.1  UN3099...........  I..............  5.1, 6.1..........  62, A6.........  None...........  201............  244...........  Forbidden.....  2.5 L.........  D.............  56, 58, 138.
                toxic, n.o.s.
                                                                  II.............  5.1, 6.1..........  62, IB1........  152............  202............  243...........  1 L...........  5 L...........  B.............  56, 58, 138.
                                                                  III............  5.1, 6.1..........  62, IB2........  152............  203............  242...........  2.5 L.........  30 L..........  B.............  56, 58, 138.
 
                                                                                                              * * * * * * *
G............  Oxidizing solid,           5.1  UN3085...........  I..............  5.1, 8............  62.............  None...........  211............  242...........  1 kg..........  15 kg.........  D.............  13, 56, 58,
                corrosive, n.o.s.                                                                                                                                                                                          138.
                                                                  II.............  5.1, 8............  62, IB6, IP2,    None...........  212............  242...........  5 kg..........  25 kg.........  B.............  13, 56, 58,
                                                                                                        T3, TP33.                                                                                                          138.
                                                                  III............  5.1, 8............  62, IB8, IP3,    152............  213............  240...........  25 kg.........  100 kg........  B.............  13, 56, 58,
                                                                                                        T1, TP33.                                                                                                          138.

[[Page 50801]]

 
G............  Oxidizing solid,           5.1  UN3137...........  I..............  5.1, 4.1..........  62.............  None...........  214............  214...........  Forbidden.....  Forbidden.....  ..............  13, 147, 148.
                flammable, n.o.s.
 
                                                                                                              * * * * * * *
G............  Oxidizing solid,           5.1  UN3087...........  I..............  5.1, 6.1..........  62.............  None...........  211............  242...........  1 kg..........  15 kg.........  D.............  56, 58, 138.
                toxic, n.o.s.
                                                                  II.............  5.1, 6.1..........  62, IB6, IP2,    152............  212............  242...........  5 kg..........  25 kg.........  B.............  56, 58, 138.
                                                                                                        T3, TP33.
                                                                  III............  5.1, 6.1..........  62, IB8, IP3,    152............  213............  240...........  25 kg.........  100 kg........  B.............  56, 58, 138.
                                                                                                        T1, TP33.
G............  Oxidizing solid,           5.1  UN3121...........  ...............  5.1, 4.3..........  62.............  None...........  214............  214...........  Forbidden.....  Forbidden.....  ..............  13, 148.
                water reactive,
                n.o.s.
 
                                                                                                              * * * * * * *
               Oxygen generator,          5.1  UN3356...........  ...............  5.1...............  ...............  None...........  168............  None..........  Forbidden.....  25 kg.........  D.............  56, 58, 69,
                chemical                                                                                                                                                                                                   106.
                (including when
                contained in
                associated
                equipment, e.g.,
                passenger service
                units (PSUs),
                portable
                breathing
                equipment (PBE),
                etc).
 
                                                                                                              * * * * * * *
               Paint including              3  UN1263...........  I..............  3.................  367, T11, TP1,   150............  201............  243...........  1 L...........  30 L..........  E.............
                paint, lacquer,                                                                         TP8, TP27.
                enamel, stain,
                shellac
                solutions,
                varnish, polish,
                liquid filler,
                and liquid
                lacquer base.
                                                                  II.............  3.................  149, 367, B52,   150............  173............  242...........  5 L...........  60 L..........  B.............
                                                                                                        IB2, T4, TP1,
                                                                                                        TP8, TP28.
                                                                  III............  3.................  367, B1, B52,    150............  173............  242...........  60 L..........  220 L.........  A.............
                                                                                                        IB3, T2, TP1,
                                                                                                        TP29.
               Paint or Paint               8  UN3066...........  II.............  8.................  367, B2, IB2,    154............  173............  242...........  1 L...........  30 L..........  A.............  40.
                related material.                                                                       T7, TP2, TP28.
                                                                  III............  8.................  367, B52, IB3,   154............  173............  241...........  5 L...........  60 L..........  A.............  40.
                                                                                                        T4, TP1, TP29.
               Paint, corrosive,            8  UN3470...........  II.............  8, 3..............  367, IB2, T7,    154............  202............  243...........  1 L...........  30 L..........  B.............  40.
                flammable                                                                               TP2, TP8, TP28.
                (including paint,
                lacquer, enamel,
                stain, shellac
                solutions,
                varnish, polish,
                liquid filler,
                and liquid
                lacquer base).
               Paint, flammable,            3  UN3469...........  I..............  3, 8..............  367, T11, TP2,   None...........  201............  243...........  0.5 L.........  2.5 L.........  E.............  40.
                corrosive,                                                                              TP27.
                (including paint,
                lacquer, enamel,
                stain, shellac,
                varnish, polish,
                liquid filler and
                liquid lacquer
                base).

[[Page 50802]]

 
                                                                  II.............  3, 8..............  367, IB2, T7,    150............  202............  243...........  1 L...........  5 L...........  B.............  40.
                                                                                                        TP2, TP8, TP28.
                                                                  III............  3, 8..............  367, IB3, T4,    150............  203............  242...........  5 L...........  60 L..........  A.............  40.
                                                                                                        TP1, TP29.
               Paint related                3  UN1263...........  I..............  3.................  367, T11, TP1,   150............  201............  243...........  1 L...........  30 L..........  E.............
                material                                                                                TP8, TP27.
                including paint
                thinning, drying,
                removing, or
                reducing compound.
                                                                  II.............  3.................  149,367, B52,    150............  173............  242...........  5 L...........  60 L..........  B.............
                                                                                                        IB2, T4, TP1,
                                                                                                        TP8, TP28.
                                                                  III............  3.................  367, B1, B52,    150............  173............  242...........  60 L..........  220 L.........  A.............
                                                                                                        IB3, T2, TP1,
                                                                                                        TP29.
               Paint related                8  UN3470...........  II.............  8, 3..............  367, IB2, T7,    154............  202............  243...........  1 L...........  30 L..........  B.............  40.
                material                                                                                TP2, TP8, TP28.
                corrosive,
                flammable
                (including paint
                thinning or
                reducing
                compound).
               Paint related                3  UN3469...........  I..............  3, 8..............  367, T11, TP2,   None...........  201............  243...........  0.5 L.........  2.5 L.........  E.............  40.
                material,                                                                               TP27.
                flammable,
                corrosive
                (including paint
                thinning or
                reducing
                compound).
                                                                  II.............  3, 8..............  367, IB2, T7,    150............  202............  243...........  1 L...........  5 L...........  B.............  40.
                                                                                                        TP2, TP8, TP28.
                                                                  III............  3, 8..............  367, IB3, T4,    150............  203............  242...........  5 L...........  60 L..........  A.............  40.
                                                                                                        TP1, TP29.
 
                                                                                                              * * * * * * *
+............  Pentaborane.......         4.2  UN1380...........  I..............  4.2, 6.1..........  1..............  None...........  205............  245...........  Forbidden.....  Forbidden.....  D.............  13, 148.
 
                                                                                                              * * * * * * *
               Peroxides,                 5.1  UN1483...........  II.............  5.1...............  A7, A20, IB6,    None...........  212............  242...........  5 kg..........  25 kg.........  C.............  13, 52, 66,
                inorganic, n.o.s.                                                                       IP2, N34, T3,                                                                                                      75, 148.
                                                                                                        TP33.
                                                                  III............  5.1...............  A7, A20, IB8,    152............  213............  240...........  25 kg.........  100 kg........  C.............  13, 52, 66,
                                                                                                        IP3, N34, T1,                                                                                                      75, 148.
                                                                                                        TP33.
 
                                                                                                              * * * * * * *
               Persulfates,               5.1  UN3216...........  III............  5.1...............  IB2, T4, TP1,    152............  203............  241...........  2.5 L.........  30 L..........  A.............  56, 58, 133.
                inorganic,                                                                              TP29.
                aqueous solution,
                n.o.s.

[[Page 50803]]

 
 
                                                                                                              * * * * * * *
G............  Pesticides,                  3  UN3021...........  I..............  3, 6.1............  B5, T14, TP2,    None...........  201............  243...........  Forbidden.....  30 L..........  B.............  40.
                liquid,                                                                                 TP13, TP27.
                flammable, toxic,
                flash point less
                than 23 degrees C.
                                                                  II.............  3, 6.1............  IB2, T11, TP2,   150............  202............  243...........  1 L...........  60 L..........  B.............  40.
                                                                                                        TP13, TP27.
 
                                                                                                              * * * * * * *
               Phenyl                     6.1  UN2746...........  II.............  6.1, 8............  IB2, T7, TP2,    153............  202............  243...........  1 L...........  30 L..........  A.............  12, 13, 25,
                chloroformate.                                                                          TP13.                                                                                                              40.
 
                                                                                                              * * * * * * *
               Phosphorus                 4.1  UN1339...........  II.............  4.1...............  A20, IB4, N34,   None...........  212............  240...........  15 kg.........  50 kg.........  B.............  13, 74, 147,
                heptasulfide,                                                                           T3, TP33.                                                                                                          148.
                free from yellow
                or white
                phosphorus.
 
                                                                                                              * * * * * * *
               Phosphorus                   8  UN1939...........  II.............  8.................  B8, IB8, IP2,    None...........  212............  240...........  Forbidden.....  50 kg.........  C.............  12, 25, 40.
                oxybromide.                                                                             IP4, N41, N43,
                                                                                                        T3, TP33.
 
                                                                                                              * * * * * * *
               Phosphorus                   8  UN2691...........  II.............  8.................  A7, IB8, IP2,    154............  212............  240...........  Forbidden.....  50 kg.........  B.............  12, 25, 40,
                pentabromide.                                                                           IP4, N34, T3,                                                                                                      53, 55.
                                                                                                        TP33.
 
                                                                                                              * * * * * * *
               Phosphorus                 4.3  UN1340...........  II.............  4.3, 4.1..........  A20, B59, IB4,   151............  212............  242...........  15 kg.........  50 kg.........  B.............  13, 74, 148.
                pentasulfide,                                                                           T3, TP33.
                free from yellow
                or white
                phosphorus.
 
                                                                                                              * * * * * * *
               Phosphorus                   8  UN2578...........  III............  8.................  IB8, IP3, T1,    154............  213............  240...........  25 kg.........  100 kg........  A.............  12, 25.
                trioxide.                                                                               TP33.
               Phosphorus                 4.1  UN1343...........  II.............  4.1...............  A20, IB4, N34,   None...........  212............  240...........  15 kg.........  50 kg.........  B.............  13, 74, 147,
                trisulfide, free                                                                        T3, TP33.                                                                                                          148.
                from yellow or
                white phosphorus.
 
                                                                                                              * * * * * * *
               Piperazine........           8  UN2579...........  III............  8.................  IB8, IP3, T1,    154............  213............  240...........  25 kg.........  100 kg........  A.............  12, 25, 52.
                                                                                                        TP33.
 
                                                                                                              * * * * * * *
               Potassium.........         4.3  UN2257...........  I..............  4.3...............  A7, A19, A20,    None...........  211............  244...........  Forbidden.....  15 kg.........  D.............  13, 52, 148.
                                                                                                        B27, IB4, IP1,
                                                                                                        N6, N34, T9,
                                                                                                        TP7, TP33.
 
                                                                                                              * * * * * * *
               Potassium                  4.3  UN1870...........  I..............  4.3...............  A19, N40.......  None...........  211............  242...........  Forbidden.....  15 kg.........  E.............  13, 52, 148.
                borohydride.
 

[[Page 50804]]

 
                                                                                                              * * * * * * *
               Potassium, metal           4.3  UN1420...........  I..............  4.3...............  A7, A19, A20,    None...........  201............  244...........  Forbidden.....  1 L...........  E.............  13, 40, 52,
                alloys, liquid.                                                                         B27.                                                                                                               148.
               Potassium, metal           4.3  UN3403...........  I..............  4.3...............  A19, A20, B27,   None...........  211............  244...........  Forbidden.....  15 kg.........  D.............  13, 52, 148.
                alloys, solid.                                                                          IB4, IP1, T9,
                                                                                                        TP7, TP33.
 
                                                                                                              * * * * * * *
               Potassium peroxide         5.1  UN1491...........  I..............  5.1...............  A20, IB6, IP1,   None...........  211............  None..........  Forbidden.....  15 kg.........  C.............  13, 52, 66,
                                                                                                        N34.                                                                                                               75, 148.
 
                                                                                                              * * * * * * *
               Potassium                  4.3  UN2012...........  I..............  4.3, 6.1..........  A19, N40.......  None...........  211............  None..........  Forbidden.....  15 kg.........  E.............  13, 40, 52,
                phosphide.                                                                                                                                                                                                 85, 148.
 
                                                                                                              * * * * * * *
               Potassium sodium           4.3  UN1422...........  I..............  4.3...............  A7, A19, B27,    None...........  201............  244...........  Forbidden.....  1 L...........  E.............  13, 40, 52,
                alloys, liquid.                                                                         N34, N40, T9,                                                                                                      148.
                                                                                                        TP3, TP7, TP31.
               Potassium sodium           4.3  UN3404...........  I..............  4.3...............  A19, B27, N34,   None...........  211............  244...........  Forbidden.....  15 kg.........  D.............  13, 52, 148.
                alloys, solid.                                                                          N40, T9, TP7,
                                                                                                        TP33.
 
                                                                                                              * * * * * * *
               Potassium                  5.1  UN2466...........  I..............  5.1...............  A20, IB6, IP1..  None...........  211............  None..........  Forbidden.....  15 kg.........  D.............  13, 52, 66,
                superoxide.                                                                                                                                                                                                75, 148.
 
                                                                                                              * * * * * * *
               Printing ink,                3  UN1210...........  I..............  3.................  367, T11, TP1,   150............  173............  243...........  1 L...........  30 L..........  E.............
                flammable or                                                                            TP8.
                Printing ink
                related material
                (including
                printing ink
                thinning or
                reducing
                compound),
                flammable.
                                                                  II.............  3.................  367, 149, IB2,   150............  173............  242...........  5 L...........  60 L..........  B.............
                                                                                                        T4, TP1, TP8.
                                                                  III............  3.................  367, B1, IB3,    150............  173............  242...........  60 L..........  220 L.........  A.............
                                                                                                        T2, TP1.
 
                                                                                                              * * * * * * *
G............  Pyrophoric liquid,         4.2  UN3194...........  I..............  4.2...............  ...............  None...........  181............  244...........  Forbidden.....  Forbidden.....  D.............  13, 78, 148.
                inorganic, n.o.s.
G............  Pyrophoric                 4.2  UN2845...........  I..............  4.2...............  B11, T22, TP2,   None...........  181............  244...........  Forbidden.....  Forbidden.....  D.............  13, 78, 148.
                liquids, organic,                                                                       TP7.
                n.o.s.

[[Page 50805]]

 
G............  Pyrophoric metals,         4.2  UN1383...........  I..............  4.2...............  B11, T21, TP7,   None...........  187............  242...........  Forbidden.....  Forbidden.....  D.............  13, 148.
                n.o.s., or                                                                              TP33.
                Pyrophoric
                alloys, n.o.s.
G............  Pyrophoric solid,          4.2  UN3200...........  I..............  4.2...............  T21, TP7, TP33.  None...........  187............  242...........  Forbidden.....  Forbidden.....  D.............  13, 148.
                inorganic, n.o.s.
G............  Pyrophoric solids,         4.2  UN2846...........  I..............  4.2...............  ...............  None...........  187............  242...........  Forbidden.....  Forbidden.....  D.............  13, 148.
                organic, n.o.s.
 
                                                                                                              * * * * * * *
               Quinoline.........         6.1  UN2656...........  III............  6.1...............  IB3, T4, TP1...  153............  203............  241...........  60 L..........  220 L.........  A.............  12, 25.
 
                                                                                                              * * * * * * *
               Radioactive                  7  UN2910...........  ...............  None..............  368............  421, 422.......  421, 422.......  421, 422......  ..............  ..............  A.............
                material,
                excepted package-
                limited quantity
                of material.
 
                                                                                                              * * * * * * *
               Rubidium..........         4.3  UN1423...........  I..............  4.3...............  22, A7, A19,     None...........  211............  242...........  Forbidden.....  15 kg.........  D.............  13,52, 148.
                                                                                                        IB4, IP1, N34,
                                                                                                        N40, N45.
 
                                                                                                              * * * * * * *
I............  Seed cake with not         4.2  UN2217...........  III............  None..............  IB8, IP3, IP7,   None...........  213............  241...........  Forbidden.....  Forbidden.....  A.............  13, 25, 120.
                more than 1.5                                                                           N7.
                percent oil and
                not more than 11
                percent moisture.
 
                                                                                                              * * * * * * *
G............  Self-reactive              4.1  UN3221...........  II.............  4.1...............  53.............  151............  224............  None..........  Forbidden.....  Forbidden.....  D.............  25, 52, 53,
                liquid type B.                                                                                                                                                                                             127.
G............  Self-reactive              4.1  UN3223...........  II.............  4.1...............  ...............  151............  224............  None..........  5 L...........  10 L..........  D.............  25, 52, 53.
                liquid type C.
G............  Self-reactive              4.1  UN3233...........  II.............  4.1...............  ...............  None...........  224............  None..........  Forbidden.....  Forbidden.....  D.............  2, 25, 52, 53.
                liquid type C,
                temperature
                controlled.
G............  Self-reactive              4.1  UN3225...........  II.............  4.1...............  ...............  151............  224............  None..........  5 L...........  10 L..........  D.............  25, 52, 53.
                liquid type D.
G............  Self-reactive              4.1  UN3235...........  II.............  4.1...............  ...............  None...........  224............  None..........  Forbidden.....  Forbidden.....  D.............  2, 25, 52, 53.
                liquid type D,
                temperature
                controlled.
G............  Self-reactive              4.1  UN3227...........  II.............  4.1...............  ...............  151............  224............  None..........  10 L..........  25 L..........  D.............  25, 52, 53.
                liquid type E.
G............  Self-reactive              4.1  UN3237...........  II.............  4.1...............  ...............  None...........  224............  None..........  Forbidden.....  Forbidden.....  D.............  2, 25, 52, 53.
                liquid type E,
                temperature
                controlled.
G............  Self-reactive              4.1  UN3229...........  II.............  4.1...............  ...............  151............  224............  None..........  10 L..........  25 L..........  D.............  25, 52, 53.
                liquid type F.
G............  Self-reactive              4.1  UN3239...........  II.............  4.1...............  ...............  None...........  224............  None..........  Forbidden.....  Forbidden.....  D.............  2, 25, 52, 53.
                liquid type F,
                temperature
                controlled.
G............  Self-reactive              4.1  UN3222...........  II.............  4.1...............  53.............  151............  224............  None..........  (1)...........  (2)...........  D.............  25, 52, 53,
                solid type B.                                                                                                                                                                                              127.
G............  Self-reactive              4.1  UN3232...........  II.............  4.1...............  53.............  None...........  224............  None..........  Forbidden.....  Forbidden.....  D.............  2, 25, 52, 53.
                solid type B,
                temperature
                controlled.
G............  Self-reactive              4.1  UN3224...........  II.............  4.1...............  ...............  151............  224............  None..........  5 kg..........  10 kg.........  D.............  25, 52, 53.
                solid type C.
G............  Self-reactive              4.1  UN3234...........  II.............  4.1...............  ...............  None...........  224............  None..........  Forbidden.....  Forbidden.....  D.............  2, 25, 52, 53.
                solid type C,
                temperature
                controlled.
G............  Self-reactive              4.1  UN3226...........  II.............  4.1...............  ...............  151............  224............  None..........  5 kg..........  10 kg.........  D.............  25, 52, 53.
                solid type D.

[[Page 50806]]

 
G............  Self-reactive              4.1  UN3236...........  II.............  4.1...............  ...............  None...........  224............  None..........  Forbidden.....  Forbidden.....  D.............  2, 25, 52, 53.
                solid type D,
                temperature
                controlled.
G............  Self-reactive              4.1  UN3228...........  II.............  4.1...............  ...............  151............  224............  None..........  10 kg.........  25 kg.........  D.............  25, 52, 53.
                solid type E.
G............  Self-reactive              4.1  UN3238...........  II.............  4.1...............  ...............  None...........  224............  None..........  Forbidden.....  Forbidden.....  D.............  2, 25, 52, 53.
                solid type E,
                temperature
                controlled.
G............  Self-reactive              4.1  UN3230...........  II.............  4.1...............  ...............  151............  224............  None..........  10 kg.........  25 kg.........  D.............  25, 52, 53.
                solid type F.
G............  Self-reactive              4.1  UN3240...........  II.............  4.1...............  ...............  None...........  224............  None..........  Forbidden.....  Forbidden.....  D.............  2, 25, 52, 53.
                solid type F,
                temperature
                controlled.
 
                                                                                                              * * * * * * *
               Sodium............         4.3  UN1428...........  I..............  4.3...............  A7, A8, A19,     None...........  211............  244...........  Forbidden.....  15 kg.........  D.............  13, 52, 148.
                                                                                                        A20, B9, B48,
                                                                                                        B68, IB4, IP1,
                                                                                                        N34, T9, TP7,
                                                                                                        TP33, TP46.
 
                                                                                                              * * * * * * *
               Sodium aluminum            4.3  UN2835...........  II.............  4.3...............  A8, A19, A20,    151............  212............  242...........  Forbidden.....  50 kg.........  E.............  13, 52, 148.
                hydride.                                                                                IB4, T3, TP33.
 
                                                                                                              * * * * * * *
               Sodium borohydride         4.3  UN1426...........  I..............  4.3...............  N40............  None...........  211............  242...........  Forbidden.....  15 kg.........  E.............  13, 52, 148.
 
                                                                                                              * * * * * * *
               Sodium dinitro-o-          4.1  UN3369...........  I..............  4.1...............  162, A8, A19,    None...........  211............  None..........  0.5 kg........  0.5 kg........  E.............  28, 36.
                cresolate, wetted                                                                       N41, N84.
                with not less
                than 10% water,
                by mass.
 
                                                                                                              * * * * * * *
               Sodium hydride....         4.3  UN1427...........  I..............  4.3...............  A19, N40.......  None...........  211............  242...........  Forbidden.....  15 kg.........  E.............  13, 52, 148.
 
                                                                                                              * * * * * * *
               Sodium peroxide...         5.1  UN1504...........  I..............  5.1...............  A20, IB5, IP1,   None...........  211............  None..........  Forbidden.....  15 kg.........  C.............  13, 52, 66,
                                                                                                        N34.                                                                                                               75, 148.
 
                                                                                                              * * * * * * *
               Sodium phosphide..         4.3  UN1432...........  I..............  4.3, 6.1..........  A19, N40.......  None...........  211............  None..........  Forbidden.....  15 kg.........  E.............  13, 40, 52,
                                                                                                                                                                                                                           85, 148.
 
                                                                                                              * * * * * * *
               Sodium superoxide.         5.1  UN2547...........  I..............  5.1...............  A20, IB6, IP1,   None...........  211............  None..........  Forbidden.....  15 kg.........  D.............  13, 52, 66,
                                                                                                        N34.                                                                                                               75, 148.
 

[[Page 50807]]

 
                                                                                                              * * * * * * *
               Stannic phosphide.         4.3  UN1433...........  I..............  4.3, 6.1..........  A19, N40.......  None...........  211............  242...........  Forbidden.....  15 kg.........  E.............  13, 40, 52,
                                                                                                                                                                                                                           85, 148.
 
                                                                                                              * * * * * * *
               Strontium peroxide         5.1  UN1509...........  II.............  5.1...............  IB6, IP2, T3,    152............  212............  242...........  5 kg..........  25 kg.........  C.............  13, 52, 66,
                                                                                                        TP33.                                                                                                              75, 148.
               Strontium                  4.3  UN2013...........  I..............  4.3, 6.1..........  A19, N40.......  None...........  211............  None..........  Forbidden.....  15 kg.........  E.............  13, 40, 52,
                phosphide.                                                                                                                                                                                                 85, 148.
 
                                                                                                              * * * * * * *
               Tear gas candles..         6.1  UN1700...........  ...............  6.1, 4.1..........  ...............  None...........  340............  None..........  Forbidden.....  50 kg.........  D.............  40.
 
                                                                                                              * * * * * * *
               Titanium powder,           4.2  UN2546...........  I..............  4.2...............  ...............  None...........  211............  242...........  Forbidden.....  Forbidden.....  D.............  13, 148.
                dry.
                                                                  II.............  4.2...............  A19, A20, IB6,   None...........  212............  241...........  15 kg.........  50 kg.........  D.............  13, 148.
                                                                                                        IP2, N5, N34,
                                                                                                        T3, TP33.
                                                                  III............  4.2...............  IB8, IP3, T1,    None...........  213............  241...........  25 kg.........  100 kg........  D.............  13, 148.
                                                                                                        TP33.
 
                                                                                                              * * * * * * *
               Titanium sponge            4.1  UN2878...........  III............  4.1...............  A1, IB8, IP3,    None...........  213............  240...........  25 kg.........  100 kg........  D.............  13, 74, 147,
                granules or                                                                             T1, TP33.                                                                                                          148.
                Titanium sponge
                powders.
 
                                                                                                              * * * * * * *
               Titanium                   4.2  UN2441...........  I..............  4.2, 8............  N34............  None...........  181............  244...........  Forbidden.....  Forbidden.....  D.............  13, 40, 148.
                trichloride,
                pyrophoric or
                Titanium
                trichloride
                mixtures,
                pyrophoric.
 
                                                                                                              * * * * * * *
G............  Toxic by                   6.1  UN3385...........  I..............  6.1, 4.3..........  1, B9, B14,      None...........  226............  244...........  Forbidden.....  Forbidden.....  D.............  13, 40, 148.
                inhalation                                                                              B30, T22, TP2,
                liquid, water-                                                                          TP13, TP38,
                reactive, n.o.s.                                                                        TP44.
                with an LC50
                lower than or
                equal to 200 ml/
                m\3\ and
                saturated vapor
                concentration
                greater than or
                equal to 500 LC50.
G............  Toxic by                   6.1  UN3386...........  I..............  6.1, 4.3..........  2, B9, B14,      None...........  227............  244...........  Forbidden.....  Forbidden.....  D.............  13, 40, 148.
                inhalation                                                                              B32, T20, TP2,
                liquid, water-                                                                          TP13, TP38,
                reactive, n.o.s.                                                                        TP44.
                with an LC50
                lower than or
                equal to 1000 ml/
                m\3\ and
                saturated vapor
                concentration
                greater than or
                equal to 10 LC50.
G............  Toxic by                   6.1  UN3490...........  I..............  6.1, 4.3, 3.......  1, B9, B14,      None...........  226............  244...........  Forbidden.....  Forbidden.....  D.............  13, 21, 28,
                inhalation                                                                              B30, T22, TP2,                                                                                                     40, 49, 148.
                liquid, water-                                                                          TP13, TP27,
                reactive,                                                                               TP38, TP44.
                flammable, n.o.s.
                with an LC50
                lower than or
                equal to 200 ml/
                m3 and saturated
                vapor
                concentration
                greater than or
                equal to 500 LC50.

[[Page 50808]]

 
G............  Toxic by                   6.1  UN3491...........  I..............  6.1, 4.3, 3.......  2, B9, B14,      None...........  227............  244...........  Forbidden.....  Forbidden.....  D.............  13, 21, 28,
                inhalation                                                                              B32, T20, TP2,                                                                                                     40, 49, 148.
                liquid, water-                                                                          TP13, TP27,
                reactive,                                                                               TP38, TP45.
                flammable, n.o.s.
                with an LC50
                lower or equal to
                1000 ml/m3 and
                saturated vapor
                concentration
                greater than or
                equal to 10 LC50.
 
                                                                                                              * * * * * * *
G............  Toxic liquid,              6.1  UN3289...........  I..............  6.1, 8............  T14, TP2, TP13,  None...........  201............  243...........  0.5 L.........  2.5 L.........  A.............  40.
                corrosive,                                                                              TP27.
                inorganic, n.o.s.
                                                                  II.............  6.1, 8............  IB2, T11, TP2,   153............  202............  243...........  1 L...........  30 L..........  A.............  40.
                                                                                                        TP27.
 
                                                                                                              * * * * * * *
G............  Toxic liquid,              6.1  UN3287...........  I..............  6.1...............  T14, TP2, TP13,  None...........  201............  243...........  1 L...........  30 L..........  A.............  40.
                inorganic, n.o.s.                                                                       TP27.
                                                                  II.............  6.1...............  IB2, T11, TP2,   153............  202............  243...........  5 L...........  60 L..........  A.............  40.
                                                                                                        TP27.
                                                                  III............  6.1...............  IB3, T7, TP1,    153............  203............  241...........  60 L..........  220 L.........  A.............  40.
                                                                                                        TP28.
 
                                                                                                              * * * * * * *
G............  Toxic liquids,             6.1  UN3123...........  I..............  6.1, 4.3..........  A4.............  None...........  201............  243...........  Forbidden.....  1 L...........  E.............  13, 40, 148.
                water-reactive,
                n.o.s.
                                                                  II.............  6.1, 4.3..........  IB2............  None...........  202............  243...........  1 L...........  5 L...........  E.............  13, 40, 148.
 
                                                                                                              * * * * * * *
G............  Toxic solid,               6.1  UN3290...........  I..............  6.1, 8............  IB7, T6, TP33..  None...........  211............  242...........  1 kg..........  25 kg.........  A.............  40.
                corrosive,
                inorganic, n.o.s.
                                                                  II.............  6.1, 8............  IB6, IP2, T3,    153............  212............  242...........  15 kg.........  50 kg.........  A.............  40.
                                                                                                        TP33.
G............  Toxic solid,               6.1  UN3288...........  I..............  6.1...............  IB7, T6, TP33..  None...........  211............  242...........  5 kg..........  50 kg.........  A.............  40.
                inorganic, n.o.s.
                                                                  II.............  6.1...............  IB8, IP2, IP4,   153............  212............  242...........  25 kg.........  100 kg........  A.............  40.
                                                                                                        T3, TP33.
                                                                  III............  6.1...............  IB8, IP3, T1,    153............  213............  240...........  100 kg........  200 kg........  A.............  40.
                                                                                                        TP33.
 
                                                                                                              * * * * * * *
G............  Toxic solids,              6.1  UN3125...........  I..............  6.1, 4.3..........  A5, T6, TP33...  None...........  211............  242...........  5 kg..........  15 kg.........  D.............  13, 40, 148.
                water-reactive,
                n.o.s.
                                                                  II.............  6.1, 4.3..........  IB6, IP2, T3,    153............  212............  242...........  15 kg.........  50 kg.........  D.............  13, 40, 148.
                                                                                                        TP33.
 

[[Page 50809]]

 
                                                                                                              * * * * * * *
               Trifluoroacetic              8  UN2699...........  I..............  8.................  A3, A6, A7, B4,  None...........  201............  243...........  0.5 L.........  2.5 L.........  B.............  12, 25, 40.
                acid.                                                                                   N3, N34, N36,
                                                                                                        T10, TP2.
 
                                                                                                              * * * * * * *
               Trimethylacetyl            6.1  UN2438...........  I..............  6.1, 8, 3.........  2, B3, B9, B14,  None...........  227............  244...........  Forbidden.....  Forbidden.....  D.............  21, 25, 40,
                chloride.                                                                               B32, N34, T20,                                                                                                     100.
                                                                                                        TP2, TP13,
                                                                                                        TP38, TP45.
 
                                                                                                              * * * * * * *
               Trinitrobenzene,           4.1  UN3367...........  I..............  4.1...............  162, A8, A19,    None...........  211............  None..........  0.5 kg........  0.5 kg........  E.............  28, 36.
                wetted, with not                                                                        N41, N84.
                less than 10%
                water, by mass.
 
                                                                                                              * * * * * * *
               Trinitrobenzoic            4.1  UN3368...........  I..............  4.1...............  162, A8, A19,    None...........  211............  None..........  0.5 kg........  0.5 kg........  E.............  28, 36.
                acid, wetted with                                                                       N41, N84.
                not less than 10%
                water by mass.
               Trinitrobenzoic            4.1  UN1355...........  I..............  4.1...............  23, A2, A8,      None...........  211............  None..........  0.5 kg........  0.5 kg........  E.............  28, 36.
                acid, wetted with                                                                       A19, N41.
                not less than 30
                percent water, by
                mass.
 
                                                                                                              * * * * * * *
               Trinitrochlorobenz         4.1  UN3365...........  I..............  4.1...............  162, A8, A19,    None...........  211............  None..........  0.5 kg........  0.5 kg........  E.............  28, 36.
                ene (picryl                                                                             N41, N84.
                chloride),
                wetted, with not
                less than 10%
                water by mass.
 
                                                                                                              * * * * * * *
               Trinitrophenol             4.1  UN3364...........  I..............  4.1...............  162, A8, A19,    None...........  211............  None..........  0.5 kg........  0.5 kg........  E.............  28, 36.
                (picric acid),                                                                          N41, N84.
                wetted, with not
                less than 10
                percent water by
                mass.
 
                                                                                                              * * * * * * *
               Trinitrotoluene            4.1  UN3366...........  I..............  4.1...............  162, A8, A19,    None...........  211............  None..........  0.5 kg........  0.5 kg........  E.............  28, 36.
                (TNT), wetted,                                                                          N41, N84.
                with not less
                than 10 percent
                water by mass.
 
                                                                                                              * * * * * * *
               Urea nitrate,              4.1  UN3370...........  I..............  4.1...............  162, A8, A19,    None...........  211............  None..........  0.5 kg........  0.5 kg........  E.............  28, 36.
                wetted, with not                                                                        N41, N84.
                less than 10
                percent water by
                mass.
 
                                                                                                              * * * * * * *
               Vinylpyridines,            6.1  UN3073...........  II.............  6.1, 3, 8.........  IB1, T7, TP2,    153............  202............  243...........  1 L...........  30 L..........  B.............  21, 40, 52,
                stabilized.                                                                             TP13.                                                                                                              100.
 

[[Page 50810]]

 
                                                                                                              * * * * * * *
G............  Water-reactive             4.3  UN3129...........  I..............  4.3, 8............  T14, TP2, TP7,   None...........  201............  243...........  Forbidden.....  1 L...........  D.............  13, 148.
                liquid,                                                                                 TP13.
                corrosive, n.o.s.
                                                                  II.............  4.3, 8............  IB1, T11, TP2,   None...........  202............  243...........  1 L...........  5 L...........  E.............  13, 85, 148.
                                                                                                        TP7.
                                                                  III............  4.3, 8............  IB2, T7, TP2,    None...........  203............  242...........  5 L...........  60 L..........  E.............  13, 148.
                                                                                                        TP7.
G............  Water-reactive             4.3  UN3148...........  I..............  4.3...............  T13, TP2, TP7,   None...........  201............  244...........  Forbidden.....  1 L...........  E.............  13, 40, 148.
                liquid, n.o.s.                                                                          TP41.
                                                                  II.............  4.3...............  IB1, T7, TP2,    None...........  202............  243...........  1 L...........  5 L...........  E.............  13, 40, 148.
                                                                                                        TP7.
                                                                  III............  4.3...............  IB2, T7, TP2,    None...........  203............  242...........  5 L...........  60 L..........  E.............  13, 40, 148.
                                                                                                        TP7.
G............  Water-reactive             4.3  UN3130...........  I..............  4.3, 6.1..........  A4.............  None...........  201............  243...........  Forbidden.....  1 L...........  D.............  13, 148.
                liquid, toxic,
                n.o.s.
                                                                  II.............  4.3, 6.1..........  IB1............  None...........  202............  243...........  1 L...........  5 L...........  E.............  13, 85, 148.
                                                                  III............  4.3, 6.1..........  IB2............  None...........  203............  242...........  5 L...........  60 L..........  E.............  13, 85, 148.
G............  Water-reactive             4.3  UN3131...........  I..............  4.3, 8............  IB4, IP1, N40,   None...........  211............  242...........  Forbidden.....  15 kg.........  D.............  13, 148.
                solid, corrosive,                                                                       T9, TP7, TP33.
                n.o.s.
                                                                  II.............  4.3, 8............  IB6, IP2, T3,    151............  212............  242...........  15 kg.........  50 kg.........  E.............  13, 85, 148.
                                                                                                        TP33.
                                                                  III............  4.3, 8............  IB8, IP4, T1,    151............  213............  241...........  25 kg.........  100 kg........  E.............  13, 85, 148.
                                                                                                        TP33.
G............  Water-reactive             4.3  UN3132...........  I..............  4.3, 4.1..........  IB4, N40.......  None...........  211............  242...........  Forbidden.....  15 kg.........  D.............  13, 148.
                solid, flammable,
                n.o.s.
                                                                  II.............  4.3, 4.1..........  IB4, T3, TP33..  151............  212............  242...........  15 kg.........  50 kg.........  E.............  13, 148.
                                                                  III............  4.3, 4.1..........  IB6, T1, TP33..  151............  213............  241...........  25 kg.........  100 kg........  E.............  13, 148.
G............  Water-reactive             4.3  UN2813...........  I..............  4.3...............  IB4, N40, T9,    None...........  211............  242...........  Forbidden.....  15 kg.........  E.............  13, 40, 148.
                solid, n.o.s.                                                                           TP7, TP33.
                                                                  II.............  4.3...............  IB7, IP2, T3,    151............  212............  242...........  15 kg.........  50 kg.........  E.............  13, 40, 148.
                                                                                                        TP33.
                                                                  III............  4.3...............  IB8, IP4, T1,    151............  213............  241...........  25 kg.........  100 kg........  E.............  13, 40, 148.
                                                                                                        TP33.
G............  Water-reactive,            4.3  UN3133...........  II.............  4.3, 5.1..........  ...............  None...........  214............  214...........  Forbidden.....  Forbidden.....  E.............  13, 40, 148.
                solid, oxidizing,
                n.o.s.
                                                                  III............  4.3, 5.1..........  ...............  None...........  214............  214...........  Forbidden.....  Forbidden.....  E.............  13, 40, 148.
G............  Water-reactive             4.3  UN3135...........  I..............  4.3, 4.2..........  N40............  None...........  211............  242...........  Forbidden.....  15 kg.........  E.............  13, 148.
                solid, self-
                heating, n.o.s.
                                                                  II.............  4.3, 4.2..........  IB5, IP2, T3,    None...........  212............  242...........  15 kg.........  50 kg.........  E.............  13, 148.
                                                                                                        TP33.
                                                                  III............  4.3, 4.2..........  IB8, IP4, T1,    None...........  213............  241...........  25 kg.........  100 kg........  E.............  13, 148.
                                                                                                        TP33.
G............  Water-reactive             4.3  UN3134...........  I..............  4.3, 6.1..........  A8, IB4, IP1,    None...........  211............  242...........  Forbidden.....  15 kg.........  D.............  13, 148.
                solid, toxic,                                                                           N40.
                n.o.s.
                                                                  II.............  4.3, 6.1..........  IB5, IP2, T3,    151............  212............  242...........  15 kg.........  50 kg.........  E.............  13, 85, 148.
                                                                                                        TP33.

[[Page 50811]]

 
                                                                  III............  4.3, 6.1..........  IB8, IP4, T1,    151............  213............  241...........  25 kg.........  100 kg........  E.............  13, 85, 148.
                                                                                                        TP33.
 
                                                                                                              * * * * * * *
               Zinc ashes........         4.3  UN1435...........  III............  4.3...............  A1, A19, IB8,    151............  213............  241...........  25 kg.........  100 kg........  A.............  13, 148.
                                                                                                        IP4, T1, TP33.
 
                                                                                                              * * * * * * *
               Zinc dithionite or           9  UN1931...........  III............  None..............  IB8, IP3, T1,    155............  204............  240...........  100 kg........  200 kg........  A.............  13, 26, 123.
                Zinc hydrosulfite.                                                                      TP33.
 
                                                                                                              * * * * * * *
               Zinc peroxide.....         5.1  UN1516...........  II.............  5.1...............  IB6, IP2, T3,    152............  212............  242...........  5 kg..........  25 kg.........  C.............  13, 52, 66,
                                                                                                        TP33.                                                                                                              75, 148.
               Zinc phosphide....         4.3  UN1714...........  I..............  4.3, 6.1..........  A19, N40.......  None...........  211............  None..........  Forbidden.....  15 kg.........  E.............  13, 40, 52,
                                                                                                                                                                                                                           85, 148.
 
                                                                                                              * * * * * * *
               Zinc powder or             4.3  UN1436...........  I..............  4.3, 4.2..........  A19, IB4, IP1,   None...........  211............  242...........  Forbidden.....  15 kg.........  A.............  13, 52, 53,
                Zinc dust.                                                                              N40.                                                                                                               148.
                                                                  II.............  4.3, 4.2..........  A19, IB7, IP2,   None...........  212............  242...........  15 kg.........  50 kg.........  A.............  13, 52, 53,
                                                                                                        T3, TP33.                                                                                                          148.
                                                                  III............  4.3, 4.2..........  IB8, IP4, T1,    None...........  213............  242...........  25 kg.........  100 kg........  A.............  13, 52, 53,
                                                                                                        TP33.                                                                                                              148.
 
                                                                                                              * * * * * * *
               Zirconium, dry,            4.1  UN2858...........  III............  4.1...............  A1.............  151............  213............  240...........  25 kg.........  100 kg........  A.............  13, 147, 148.
                coiled wire,
                finished metal
                sheets, strip
                (thinner than 254
                microns but not
                thinner than 18
                microns).
               Zirconium, dry,            4.2  UN2009...........  III............  4.2...............  A1, A19........  None...........  213............  240...........  25 kg.........  100 kg........  D.............  13, 148.
                finished sheets,
                strip or coiled
                wire.
 
                                                                                                              * * * * * * *
               Zirconium powder,          4.2  UN2008...........  I..............  4.2...............  T21, TP7, TP33.  None...........  211............  242...........  Forbidden.....  Forbidden.....  D.............  13, 148.
                dry.
                                                                  II.............  4.2...............  A19, A20, IB6,   None...........  212............  241...........  15 kg.........  50 kg.........  D.............  13, 148.
                                                                                                        IP2, N5, N34,
                                                                                                        T3, TP33.
                                                                  III............  4.2...............  IB8, IP3, T1,    None...........  213............  241...........  25 kg.........  100 kg........  D.............  13, 148.
                                                                                                        TP33.
               Zirconium powder,          4.1  UN1358...........  II.............  4.1...............  A19, A20, IB6,   None...........  212............  241...........  15 kg.........  50 kg.........  E.............  13, 74, 147,
                wetted with not                                                                         IP2, N34, T3,                                                                                                      148.
                less than 25                                                                            TP33.
                percent water (a
                visible excess of
                water must be
                present) (a)
                mechanically
                produced,
                particle size
                less than 53
                microns; (b)
                chemically
                produced,
                particle size
                less than 840
                microns.
               Zirconium scrap...         4.2  UN1932...........  III............  4.2...............  IB8, IP3, N34,   None...........  213............  240...........  Forbidden.....  Forbidden.....  D.............  13, 148.
                                                                                                        T1, TP33.
 
                                                                                                              * * * * * * *
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


[[Page 50812]]

* * * * *

Appendix B to Sec.  172.101--List of Marine Pollutants

* * * * *

                        List of Marine Pollutants
------------------------------------------------------------------------
          S, M, P (1)                     Marine pollutant (2)
[Remove:].....................  Chlorotoluenes (meta-;para-).
 
                              * * * * * * *
[Add:]
 
                              * * * * * * *
                                Acroleic acid, stabilized.
 
                              * * * * * * *
                                Acrylic Acid, Stabilized.
 
                              * * * * * * *
                                Allyl alcohol.
 
                              * * * * * * *
                                Aminobenzene.
 
                              * * * * * * *
                                Ammonia, anhydrous (I).
                                Ammonia solution, relative density less
                                 than 0.880 at 15 degrees C in water,
                                 with more than 50 percent ammonia.
                                Ammonia Solution relative density less
                                 than 0.880 at 15 degrees C in water,
                                 with more than 35% but not more than
                                 50% ammonia.
                                Ammonia solution, relative density
                                 between 0.880 and 0.957 at 15 degrees C
                                 in water, with more than 10 percent but
                                 not more than 35 percent ammonia, by
                                 mass.
 
                              * * * * * * *
                                Aniline.
                                Aniline oil.
 
                              * * * * * * *
                                Bleaching powder.
 
                              * * * * * * *
                                Butylbenzenes.
 
                              * * * * * * *
                                Calcium hypochlorite , dry with more
                                 than 39% available chlorine (8.8%
                                 available oxygen).
                                Calcium hypochlorite mixture, dry with
                                 more than 10% but not more than 39%
                                 available chlorine.
                                Calcium hypochlorite mixture, dry with
                                 more than 39% available chlorine (8.8%
                                 available oxygen).
                                Calcium hypochlorite mixture, dry,
                                 corrosive with more than 10% but not
                                 more than 39% available chlorine.
                                Calcium hypochlorite mixture, dry,
                                 corrosive with more than 39% available
                                 chlorine (8.8% available oxygen).
                                Calcium hypochlorite, hydrated with not
                                 less than 5.5% but not more than 16%
                                 water.
                                Calcium hypochlorite, hydrated,
                                 corrosive with not less than 5.5% but
                                 not more than 16% water.
                                Calcium hypochlorite, hydrated mixture
                                 with not less than 5.5% but not more
                                 than 16% water.
                                Calcium hypochlorite, hydrated mixture,
                                 corrosive with not less than 5.5% but
                                 not more than 16% water.
 
                              * * * * * * *
                                ortho-Chlorotoluene.
 
                              * * * * * * *
                                Creosote salts.
 
                              * * * * * * *
                                Cycloheptane.
 
                              * * * * * * *
                                2,4-Dichlorophenol.
 
                              * * * * * * *
                                1,3-Dichloropropene.
 
                              * * * * * * *
                                Dimethyl Disulphide.
 
                              * * * * * * *
                                Dinitrotoluenes, Liquid.
                                Dinitrotoluenes, Molton.

[[Page 50813]]

 
                                Dintrotoluenes, Solid.
 
                              * * * * * * *
                                Dodecene.
 
                              * * * * * * *
                                Heptanes.
 
                              * * * * * * *
                                Hexane.
 
                              * * * * * * *
                                Isooctane.
 
                              * * * * * * *
                                Mesitylene.
 
                              * * * * * * *
                                Methyl disulphide.
 
                              * * * * * * *
                                2-Methyl-2-phenylpropane.
 
                              * * * * * * *
                                Methyldinitrobenzenes, liquid.
                                Methyldinitrobenzenes, molten.
                                Methyldinitrobenzenes, solid.
                                Methyldithiomethane.
                                2-Methylheptane.
 
                              * * * * * * *
                                2-Methylpentane.
 
                              * * * * * * *
                                Naphthalene, crude or Naphthalene,
                                 refined.
                                Napthalene, molten.
 
                              * * * * * * *
                                Nonanes.
 
                              * * * * * * *
                                Octanes.
 
                              * * * * * * *
                                Phenylamine.
 
                              * * * * * * *
                                Pine Oil.
                                alpha-Pinene.
 
                              * * * * * * *
                                Propenoic acid, stabilized.
                                Propenyl alcohol.
 
                              * * * * * * *
                                Propylene Tetramer.
 
                              * * * * * * *
                                Sodium hypochlorite solution.
 
                              * * * * * * *
                                Tetrapropylene.
 
                              * * * * * * *
                                Toluidines, liquid.
                                Toluidines, Solid.
 
                              * * * * * * *
                                1,3,5- Trimethylbenzene.
 
                              * * * * * * *
                                2,2,4-Trimethylpentane.

[[Page 50814]]

 
 
                              * * * * * * *
                                Turpentine.
 
                              * * * * * * *
                                Zinc Chloride, Anhydrous.
                                Zinc Chloride Solution.
 
                              * * * * * * *
------------------------------------------------------------------------

0
10. In Sec.  172.102:
0
a. In paragraph (c)(1), special provisions 28, 52, 147, 160, 238, 342 
and 362 are revised, special provisions 367, 368, 369, 370, 371, and 
372 are added, and special provision 161 is removed.
0
b. In paragraph (c)(2), special provision A60 is revised and A61 is 
added.
0
c. Paragraph (c)(4) introductory text, (c)(4) Table 1 and (c)(4) Table 
2 are revised.
0
d. In paragraph (c)(8)(ii), TP47 is added in numerical sequence.
    The additions and revisions read as follows:


Sec.  172.102  Special provisions.

* * * * *
    (c) * * *
    (1) * * *
    28 The dihydrated sodium salt of dichloroisocyanuric acid does not 
meet the criteria for inclusion in Division 5.1 (Oxidizer) and is not 
subject to the requirements of this subchapter unless meeting the 
criteria for inclusion in another class or division.
* * * * *
    52 This entry may only be used for substances that are too 
insensitive for acceptance into Class 1 (explosive) when tested in 
accordance with Test Series 2 in the UN Manual of Tests and Criteria, 
Part I (incorporated by reference; see Sec.  171.7 of this subchapter).
* * * * *
    147 This entry applies to non-sensitized emulsions, suspensions, 
and gels consisting primarily of a mixture of ammonium nitrate and 
fuel, intended to produce a Type E blasting explosive only after 
further processing prior to use. The mixture for emulsions typically 
has the following composition: 60-85% ammonium nitrate; 5-30% water; 2-
8% fuel; 0.5-4% emulsifier or thickening agent; 0-10% soluble flame 
suppressants; and trace additives. Other inorganic nitrate salts may 
replace part of the ammonium nitrate. The mixture for suspensions and 
gels typically has the following composition: 60-85% ammonium nitrate; 
0-5% sodium or potassium perchlorate; 0-17% hexamine nitrate or 
monomethylamine nitrate; 5-30% water; 2-15% fuel; 0.5-4% thickening 
agent; 0-10% soluble flame suppressants; and trace additives. Other 
inorganic nitrate salts may replace part of the ammonium nitrate. These 
substances must satisfactorily pass Tests 8(a), (b) and (c) of Test 
Series 8 of the UN Manual of Tests and Criteria, Part I, Section 18 
(IBR, see Sec.  171.7 of this subchapter), and may not be classified 
and transported unless approved by the Associate Administrator.
* * * * *
    160 This entry applies to safety devices for vehicles, vessels or 
aircraft, e.g. air bag inflators, air bag modules, seat-belt 
pretensioners, and pyromechanical devices containing Class 1 
(explosive) materials or materials of other hazard classes. These 
articles must be tested in accordance with Test series 6(c) of Part I 
of the UN Manual of Tests and Criteria (incorporated by reference; see 
Sec.  171.7 of this subchapter), with no explosion of the device, no 
fragmentation of device casing or pressure vessel, and no projection 
hazard nor thermal effect that would significantly hinder fire-fighting 
or other emergency response efforts in the immediate vicinity. If the 
air bag inflator unit satisfactorily passes the series 6(c) test, it is 
not necessary to repeat the test on the air bag module. This entry does 
not apply to life saving appliances described in Sec.  173.219 (UN2990 
and UN3072).
* * * * *
    238 Neutron radiation detectors:
    a. Neutron radiation detectors containing non-pressurized boron 
trifluoride gas in excess of 1 gram and radiation detection systems 
containing such neutron radiation detectors as components may be 
transported by highway, rail, vessel, or cargo aircraft in accordance 
with the following:
    (1) Each radiation detector must meet the following conditions:
    (i) The pressure in each neutron radiation detector must not exceed 
105 kPa absolute at 20 [deg]C;
    (ii) The amount of gas must not exceed 13 grams per detector;
    (iii) Each neutron radiation detector must be of welded metal 
construction with brazed metal to ceramic feed through assemblies. 
These detectors must have a minimum burst pressure of 1800 kPa as 
demonstrated by design type qualification testing; and
    (iv) Each detector must be tested to a 1 x 10-\10\ 
cm\3\/s leaktightness standard before filling.
    (2) Radiation detectors transported as individual components must 
be transported as follows:
    (i) They must be packed in a sealed intermediate plastic liner with 
sufficient absorbent material to absorb the entire gas contents.
    (ii) They must be packed in strong outer packagings and the 
completed package must be capable of withstanding a 1.8 meter (6-foot) 
drop without leakage of gas contents from detectors.
    (iii) The total amount of gas from all detectors per outer 
packaging must not exceed 52 grams.
    (3) Completed neutron radiation detection systems containing 
detectors meeting the conditions of paragraph (a)(1) of this special 
provision must be transported as follows:
    (i) The detectors must be contained in a strong sealed outer 
casing;
    (ii) The casing must contain include sufficient absorbent material 
to absorb the entire gas contents;
    (iii) The completed system must be packed in strong outer 
packagings capable of withstanding a 1.8 meter (6-foot) drop test 
without leakage unless a system's outer casing affords equivalent 
protection.
    b. Except for transportation by aircraft, neutron radiation 
detectors and radiation detection systems containing such detectors 
transported in accordance with paragraph (a) of this special provision 
are not subject to the

[[Page 50815]]

labeling and placarding requirements of part 172 of this subchapter.
    c. When transported by highway, rail, vessel, or as cargo on an 
aircraft, neutron radiation detectors containing not more than 1 gram 
of boron trifluoride, including those with solder glass joints are not 
subject to any other requirements of this subchapter provided they meet 
the requirements in paragraph (a)(1) of this special provision and are 
packed in accordance with paragraph (a)(2) of this special provision. 
Radiation detection systems containing such detectors are not subject 
to any other requirements of this subchapter provided they are packed 
in accordance with paragraph (a)(3) of this special provision.
* * * * *
    342 Glass inner packagings (such as ampoules or capsules) intended 
only for use in sterilization devices, when containing less than 30 mL 
of ethylene oxide per inner packaging with not more than 300 mL per 
outer packaging, may be transported in accordance with Sec.  173.4a of 
this subchapter, irrespective of the restriction of Sec.  173.4a(b) and 
the indication of ``forbidden'' in columns (9A) and (9B) of the Sec.  
172.101 table provided that:
    a. After filling, each glass inner packaging must be determined to 
be leak-tight by placing the glass inner packaging in a hot water bath 
at a temperature and for a period of time sufficient to ensure that an 
internal pressure equal to the vapor pressure of ethylene oxide at 55 
[deg]C is achieved. Any glass inner packaging showing evidence of 
leakage, distortion or other defect under this test must not be 
transported under the terms of this special provision;
    b. In addition to the packaging required in Sec.  173.4a, each 
glass inner packaging must be placed in a sealed plastic bag compatible 
with ethylene oxide and capable of containing the contents in the event 
of breakage or leakage of the glass inner packaging; and
    c. Each glass inner packaging is protected by a means of preventing 
puncture of the plastic bag (e.g., sleeves or cushioning) in the event 
of damage to the packaging (e.g., by crushing).
* * * * *
    362 This entry applies to liquids, pastes or powders, pressurized 
with a propellant that meets the definition of a gas in Sec.  173.115. 
A chemical under pressure packaged in an aerosol dispenser must be 
transported under UN1950. The chemical under pressure must be classed 
based on the hazard characteristics of the components in the 
propellant; the liquid; or the solid. The following provisions also 
apply:
    a. If one of the components, which can be a pure substance or a 
mixture, is classed as flammable, the chemical under pressure must be 
classed as flammable in Division 2.1. Flammable components are 
flammable liquids and liquid mixtures, flammable solids and solid 
mixtures or flammable gases and gas mixtures meeting the following 
criteria:
    (1) A flammable liquid is a liquid having a flashpoint of not more 
than 93 [deg]C (200 [deg]F);
    (2) A flammable solid is a solid that meets the criteria in Sec.  
173.124 of this subchapter; or
    (3) A flammable gas is a gas that meets the criteria in Sec.  
173.115 of this subchapter.
    b. Gases of Division 2.3 and gases with a subsidiary risk of 5.1 
must not be used as a propellant in a chemical under pressure.
    c. Where the liquid or solid components are classed as Division 
6.1, Packing Group II or III, or Class 8, Packing Group II or III, the 
chemical under pressure must be assigned a subsidiary risk of Division 
6.1 or Class 8 and the appropriate identification number must be 
assigned. Components classed as Division 6.1, Packing Group I, or Class 
8, Packing Group I, must not be offered for transportation and 
transported under this description.
    d. A chemical under pressure with components meeting the properties 
of: Class 1 (explosives); Class 3 (liquid desensitized explosives); 
Division 4.1 (self-reactive substances and solid desensitized 
explosives); Division 4.2 (substances liable to spontaneous 
combustion); Division 4.3 (substances which, in contact with water, 
emit flammable gases or toxic gases); Division 5.1 (oxidizing 
substances); Division 5.2 (organic peroxides); Division 6.2 (Infectious 
substances); or, Class 7 (Radioactive material), must not be offered 
for transportation under this description.
    d. A description to which special provision 170 or TP7 is assigned 
in Column 7 of the Sec.  172.101 Hazardous Materials Table, and 
therefore requires air to be eliminated from the package vapor space by 
nitrogen or other means, must not be offered for transportation under 
this description.
    (f) Chemicals under pressure containing components forbidden for 
transport on both passenger and cargo aircraft in Columns (9A) and (9B) 
of 13 of the Sec.  172.101 Hazardous Materials Table, must not be 
transported by air.
* * * * *
    367 For the purposes of documentation and package marking:
    a. The proper shipping name ``Paint related material'' may be used 
for consignments of packages containing ``Paint'' and ``Paint related 
material'' in the same package;
    b. The proper shipping name ``Paint related material, corrosive, 
flammable'' may be used for consignments of packages containing 
``Paint, corrosive, flammable'' and ``Paint related material, 
corrosive, flammable'' in the same package;
    c. The proper shipping name ``Paint related material, flammable, 
corrosive'' may be used for consignments of packages containing 
``Paint, flammable, corrosive'' and ``Paint related material, 
flammable, corrosive'' in the same package; and
    d. The proper shipping name ``Printing ink related material'' may 
be used for consignments of packages containing ``Printing ink'' and 
``Printing ink related material'' in the same package.
    368 In the case of non-fissile or fissile-excepted uranium 
hexafluoride, the material must be classified under UN3507 or UN2978.
    369 In accordance with Sec.  173.2a, this radioactive material in 
an excepted package possessing corrosive properties is classified in 
Class 8 with a radioactive material subsidiary risk. Uranium 
hexafluoride may be classified under this entry only if the conditions 
of Sec. Sec.  173.420(a)(4) and (a)(6), 173.420 (d), 173.421(a)(2) and 
(a)(4), and, for fissile-excepted material, the conditions of 173.453 
are met. In addition to the provisions applicable to the transport of 
Class 8 substances, the provisions of Sec. Sec.  173.421(a)(3), and 
173.443(a) apply. In addition, packages shall be legibly and durably 
marked with an identification of the consignor, the consignee, or both. 
No Class 7 label is required to be displayed. The consignor shall be in 
possession of a copy of each applicable certificate when packages 
include fissile material excepted by competent authority approval. When 
a consignment is undeliverable, the consignment shall be placed in a 
safe location and the appropriate competent authority shall be informed 
as soon as possible and a request made for instructions on further 
action. If it is evident that a package of radioactive material, or 
conveyance carrying unpackaged radioactive material, is leaking, or if 
it is suspected that the package, or conveyance carrying unpackaged 
material, may have leaked, access to the package or conveyance must be 
restricted and, as soon as possible, the extent of contamination

[[Page 50816]]

and the resultant radiation level of the package or conveyance must be 
assessed. The scope of the assessment must include, as applicable, the 
package, the conveyance, the adjacent loading and unloading areas, and, 
if necessary, all other material which has been carried in the 
conveyance. When necessary, additional steps for the protection of 
persons, property, and the environment must be taken to overcome and 
minimize the consequences of such leakage. Packages, and conveyances 
carrying unpackaged material, which are leaking radioactive contents in 
excess of limits for normal conditions of transport may be removed to 
an interim location under supervision, but must not be forwarded until 
repaired or reconditioned and decontaminated, or as approved by the 
Associate Administrator.
    370 This entry applies to:
    a. Ammonium nitrate with more than 0.2% combustible substances, 
including any organic substance calculated as carbon, to the exclusion 
of any added substance; and
    b. Ammonium nitrate with not more than 0.2% combustible substances, 
including any organic substance calculated as carbon, to the exclusion 
of any added substance, that gives a positive result when tested in 
accordance with Test Series 2 of the UN Manual of Tests and Criteria, 
Part I (incorporated by reference; see Sec.  171.7 of this subchapter). 
See also UN No. 1942.
    371 a. This entry also applies to articles, containing a small 
pressure receptacle with a release device. Such articles must comply 
with the following requirements:
    (1) The water capacity of the pressure receptacle must not exceed 
0.5 L and the working pressure must not exceed 25 bar at 15 [deg]C;
    (2) The minimum burst pressure of the pressure receptacle must be 
at least four times the pressure of the gas at 15 [deg]C;
    (3) Each article must be manufactured in such a way that 
unintentional firing or release is avoided under normal conditions of 
handling, packing, transport and use. This may be fulfilled by an 
additional locking device linked to the activator;
    (4) Each article must be manufactured in such a way as to prevent 
hazardous projections of the pressure receptacle or parts of the 
pressure receptacle;
    (5) Each pressure receptacle must be manufactured from material 
which will not fragment upon rupture;
    (6) The design type of the article must be subjected to a fire 
test. For this test, the provisions of paragraphs 16.6.1.2 except 
letter g, 16.6.1.3.1 to 16.6.1.3.6, 16.6.1.3.7(b) and 16.6.1.3.8 of the 
UN Manual of Tests and Criteria must be applied. It must be 
demonstrated that the article relieves its pressure by means of a fire 
degradable seal or other pressure relief device, in such a way that the 
pressure receptacle will not fragment and that the article or fragments 
of the article do not rocket more than 10 meters; and
    (7) The design type of the article must be subjected to the 
following test. A stimulating mechanism must be used to initiate one 
article in the middle of the packaging. There must be no hazardous 
effects outside the package such as disruption of the package, metal 
fragments or a receptacle which passes through the packaging.
    b. The manufacturer must produce technical documentation of the 
design type, manufacture as well as the tests and their results. The 
manufacturer must apply procedures to ensure that articles produced in 
series are made of good quality, conform to the design type and are 
able to meet the requirements in (a).
    The manufacturer must provide such information to a representative 
of the Department upon request.
    372 This entry applies to asymmetric capacitors with an energy 
storage capacity greater than 0.3 Wh. Capacitors with an energy storage 
capacity of 0.3 Wh or less are not subject to the requirements of this 
subchapter.
    Energy storage capacity means the energy stored in a capacitor, as 
calculated according to the following equation,

Wh=1/2CN(UR\2\-UL\2\) x (1/3600)

    Using the nominal capacitance (CN), rated voltage 
(UR) and the rated lower limit voltage (UL).
    Nickel-carbon asymmetric capacitors containing Class 8 alkaline 
electrolytes must be transported as UN2795, Batteries, wet, filled with 
alkali, electric storage.
* * * * *
    (2) * * *
    A60 Sterilization devices, when containing less than 30 mL per 
inner packaging with not more than 150 mL per outer packaging, may be 
transported in accordance with the provisions in Sec.  173.4a, 
irrespective of Sec.  173.4a(b), provided such packagings were first 
subjected to comparative fire testing. Comparative fire testing between 
a package as prepared for transport (including the substance to be 
transported) and an identical package filled with water must show that 
the maximum temperature measured inside the packages during testing 
does not differ by more than 200 [deg]C (392 [deg]F). Packagings may 
include a vent to permit the slow escape of gas (i.e. not more than 0.1 
mL/hour per 30 mL inner packaging at 20 [deg]C (68 [deg]F) produced 
from gradual decomposition. The requirements of Sec. Sec.  173.24(g)(1) 
and 173.27(c) do not apply.
    A61 a. When used for purposes such as sterilization, inner 
packagings of peroxyacetic acid, stabilized, classified as UN 3107 
Organic peroxide type E, liquid or UN 3109 Organic peroxide type F, 
liquid may be fitted with a vent consisting of hydrophobic membrane, 
provided:
    (1) Each inner packaging contains not more than 70 mL;
    (2) The inner packaging is designed so that the vent is not 
immersed in liquid in any orientation;
    (3) Each inner packaging is enclosed in an intermediate rigid 
plastic packaging with a small opening to permit release of gas and 
contains a buffer that neutralizes the contents of the inner packaging 
in the event of leakage;
    (4) Intermediate packagings are packed in a fiberboard box (4G) 
outer packaging;
    (5) Each outer packaging contains not more than 1.4 L of liquid; 
and
    (6) The rate of oxygen release from the outer packaging does not 
exceed 15 mL per hour.
    b. Such packages must be transported on cargo aircraft only. The 
requirements of Sec. Sec.  173.24(g)(1) and 173.27(c) do not apply.
* * * * *
    (4) IB Codes and IP Codes. These provisions apply only to 
transportation in IBCs and Large Packagings. Table 1 authorizes IBCs 
for specific proper shipping names through the use of IB Codes assigned 
in the Sec.  172.101 table of this subchapter. Table 2 defines IP Codes 
on the use of IBCs that are assigned to specific commodities in the 
Sec.  172.101 Table of this subchapter. Table 3 authorizes Large 
Packagings for specific proper shipping names through the use of IB 
Codes assigned in the Sec.  172.101 table of this subchapter. Large 
Packagings are authorized for the Packing Group III entries of specific 
proper shipping names when either special provision IB3 or IB8 is 
assigned to that entry in the Sec.  172.101 Table. When no IB code is 
assigned in the Sec.  172.101 Table for a specific proper shipping 
name, or in Sec.  173.185 or Sec.  173.225(e) Organic Peroxide Table 
for Type F organic peroxides, use of an IBC or Large Packaging for the 
material may be authorized when approved by the

[[Page 50817]]

Associate Administrator. The letter ``Z'' shown in the marking code for 
composite IBCs must be replaced with a capital code letter designation 
found in Sec.  178.702(a)(2) of this subchapter to specify the material 
used for the other packaging. Tables 1, 2, and 3 follow:

                            Table 1--IB Codes
                               [IBC Codes]
------------------------------------------------------------------------
             IBC code                         Authorized IBCs
------------------------------------------------------------------------
IB1..............................  Authorized IBCs: Metal (31A, 31B and
                                    31N).
                                   Additional Requirement: Only liquids
                                    with a vapor pressure less than or
                                    equal to 110 kPa at 50 [deg]C (1.1
                                    bar at 122 [deg]F), or 130 kPa at 55
                                    [deg]C (1.3 bar at 131 [deg]F) are
                                    authorized.
IB2..............................  Authorized IBCs: Metal (31A, 31B and
                                    31N); Rigid plastics (31H1 and
                                    31H2); Composite (31HZ1).
                                   Additional Requirement: Only liquids
                                    with a vapor pressure less than or
                                    equal to 110 kPa at 50 [deg]C (1.1
                                    bar at 122 [deg]F), or 130 kPa at 55
                                    [deg]C (1.3 bar at 131 [deg]F) are
                                    authorized.
IB3..............................  Authorized IBCs: Metal (31A, 31B and
                                    31N); Rigid plastics (31H1 and
                                    31H2); Composite (31HZ1 and 31HA2,
                                    31HB2, 31HN2, 31HD2 and 31HH2).
                                   Additional Requirement: Only liquids
                                    with a vapor pressure less than or
                                    equal to 110 kPa at 50 [deg]C (1.1
                                    bar at 122 [deg]F), or 130 kPa at 55
                                    [deg]C (1.3 bar at 131 [deg]F) are
                                    authorized, except for UN2672 (also
                                    see special provision IP8 in Table 2
                                    for UN2672).
IB4..............................  Authorized IBCs: Metal (11A, 11B,
                                    11N, 21A, 21B, 21N, 31A, 31B and
                                    31N).
IB5..............................  Authorized IBCs: Metal (11A, 11B,
                                    11N, 21A, 21B, 21N, 31A, 31B and
                                    31N); Rigid plastics (11H1, 11H2,
                                    21H1, 21H2, 31H1 and 31H2);
                                    Composite (11HZ1, 21HZ1 and 31HZ1).
IB6..............................  Authorized IBCs: Metal (11A, 11B,
                                    11N, 21A, 21B, 21N, 31A, 31B and
                                    31N); Rigid plastics (11H1, 11H2,
                                    21H1, 21H2, 31H1 and 31H2);
                                    Composite (11HZ1, 11HZ2, 21HZ1,
                                    21HZ2 and 31HZ1).
                                   Additional Requirement: Composite
                                    IBCs 11HZ2 and 21HZ2 may not be used
                                    when the hazardous materials being
                                    transported may become liquid during
                                    transport.
IB7..............................  Authorized IBCs: Metal (11A, 11B,
                                    11N, 21A, 21B, 21N, 31A, 31B and
                                    31N); Rigid plastics (11H1, 11H2,
                                    21H1, 21H2, 31H1 and 31H2);
                                    Composite (11HZ1, 11HZ2, 21HZ1,
                                    21HZ2 and 31HZ1); Wooden (11C, 11D
                                    and 11F).
                                   Additional Requirement: Liners of
                                    wooden IBCs must be sift-proof.
IB8..............................  Authorized IBCs: Metal (11A, 11B,
                                    11N, 21A, 21B, 21N, 31A, 31B and
                                    31N); Rigid plastics (11H1, 11H2,
                                    21H1, 21H2, 31H1 and 31H2 );
                                    Composite (11HZ1, 11HZ2, 21HZ1,
                                    21HZ2 and 31HZ1); Fiberboard (11G);
                                    Wooden (11C, 11D and 11F); Flexible
                                    (13H1, 13H2, 13H3, 13H4, 13H5, 13L1,
                                    13L2, 13L3, 13L4, 13M1 or 13M2).
IB9..............................  IBCs are only authorized if approved
                                    by the Associate Administrator.
------------------------------------------------------------------------


                            Table 2--IP Codes
------------------------------------------------------------------------
            IP code
------------------------------------------------------------------------
IP1............................  IBCs must be packed in closed freight
                                  containers or a closed transport
                                  vehicle.
IP2............................  When IBCs other than metal or rigid
                                  plastics IBCs are used, they must be
                                  offered for transportation in a closed
                                  freight container or a closed
                                  transport vehicle.
IP3............................  Flexible IBCs must be sift-proof and
                                  water-resistant or must be fitted with
                                  a sift-proof and water-resistant
                                  liner.
IP4............................  Flexible, fiberboard or wooden IBCs
                                  must be sift-proof and water-resistant
                                  or be fitted with a sift-proof and
                                  water-resistant liner.
IP5............................  IBCs must have a device to allow
                                  venting. The inlet to the venting
                                  device must be located in the vapor
                                  space of the IBC under maximum filling
                                  conditions.
IP6............................  Non-specification bulk bins are
                                  authorized.
IP7............................  For UN identification numbers 1327,
                                  1363, 1364, 1365, 1386, 1841, 2211,
                                  2217, 2793 and 3314, IBCs are not
                                  required to meet the IBC performance
                                  tests specified in part 178, subpart N
                                  of this subchapter.
IP8............................  Ammonia solutions may be transported in
                                  rigid or composite plastic IBCs (31H1,
                                  31H2 and 31HZ1) that have successfully
                                  passed, without leakage or permanent
                                  deformation, the hydrostatic test
                                  specified in Sec.   178.814 of this
                                  subchapter at a test pressure that is
                                  not less than 1.5 times the vapor
                                  pressure of the contents at 55 [deg]C
                                  (131 [deg]F).
IP13...........................  Transportation by vessel in IBCs is
                                  prohibited.
IP14...........................  Air must be eliminated from the vapor
                                  space by nitrogen or other means.
IP15...........................  For UN2031 with more than 55% nitric
                                  acid, rigid plastic IBCs and composite
                                  IBCs with a rigid plastic inner
                                  receptacle are authorized for two
                                  years from the date of IBC
                                  manufacture.
IP16...........................  IBCs of type 31A and 31N are only
                                  authorized if approved by the
                                  Associate Administrator.
IP20...........................  Dry sodium cyanide or potassium cyanide
                                  is also permitted in siftproof, water-
                                  resistant, fiberboard IBCs when
                                  transported in closed freight
                                  containers or transport vehicles.
------------------------------------------------------------------------

* * * * *
    (8) * * *
    (ii) * * *
    TP47 The 2.5 year internal examination may be waived or substituted 
by other test methods or inspection procedures specified by the 
competent authority or its authorized body, provided that the portable 
tank is dedicated to the transport of the organometallic substances to 
which this tank special provision is assigned. However this examination 
is required when the conditions of Sec.  180.605(f) are met.
* * * * *
0
11. In Sec.  172.315, paragraphs (a)(2) and (b)(2) are revised to read 
as follows:


Sec.  172.315  Limited quantities.

    (a) * * *
    (2) The square-on-point must be durable, legible and of a size 
relative to the packaging, readily visible, and must be applied on at 
least one side or one end of the outer packaging. The width of the 
border forming the square-on-point must be at least 2 mm and the 
minimum dimension of each side, as measured from the outside of the 
lines forming the border, must be 100 mm unless the packaging size 
requires a reduced size marking that must be no less than 50 mm on each 
side and the width of the border forming the square on point may be 
reduced to a minimum

[[Page 50818]]

of 1 mm. Where dimensions are not specified, all features shall be in 
approximate proportion to those shown. When intended for transportation 
by vessel, a cargo transport unit (see Sec.  176.2 of this subchapter) 
containing packages of hazardous materials in only limited quantities 
must be marked once on each side and once on each end of the exterior 
of the unit with an identical mark which must have minimum dimensions 
of 250 mm on each side.
    (i) Transitional exception--A marking in conformance with the 
requirements of this paragraph in effect on October 1, 2012, may 
continue to be used until December 31, 2016.
    (ii) [Reserved]
    (b) * * *
    (2) The square-on-point must be durable, legible and of a size 
relative to the package as to be readily visible. The square-on-point 
must be applied on at least one side or one end of the outer packaging. 
The width of the border forming the square-on-point must be at least 2 
mm and the minimum dimension of each side, as measured from the outside 
of the lines forming the border, must be 100 mm unless the package size 
requires a reduced size marking that must be no less than 50 mm on each 
side and the width of the border forming the square on point may be 
reduced to a minimum of 1 mm. Where dimensions are not specified, all 
features shall be in approximate proportion to those shown.
    (i) Transitional exception--A marking in conformance with the 
requirements of this paragraph in effect on October 1, 2012, may 
continue to be used until December 31, 2016.
    (ii) [Reserved]
* * * * *
0
12. In Sec.  172.317, paragraph (b) is revised to read as follows:


Sec.  172.317  KEEP AWAY FROM HEAT handling mark.

* * * * *
    (b) Location and design. The marking must be a rectangle measuring 
at least 105 mm (4.1 inches) in height by 74 mm (2.9 inches) in width 
as measured from the outside of the lines forming the border. Markings 
with not less than half this dimension are permissible where the 
dimensions of the package can only bear a smaller mark.
    (1) Transitional exception--A marking in conformance with the 
requirements of this paragraph in effect on October 1, 2012, may 
continue to be used until December 31, 2016.
    (2) [Reserved]
* * * * *
0
13. In Sec.  172.322, paragraphs (a)(2), (b) introductory text, (e) 
introductory text, (e)(2) introductory text, (e)(2)(i) introductory 
text, and (e)(2)(i)(A) are revised and adding paragraph (e)(3) to read 
as follows:


Sec.  172.322  Marine pollutants.

* * * * *
    (a) * * *
    (2) Except as otherwise provided in this subchapter, the MARINE 
POLLUTANT mark shall be placed in association with the hazard warning 
labels required by subpart E of this part or, in the absence of any 
labels, in association with the marked proper shipping name.
    (b) Except as otherwise provided in this subchapter, a bulk 
packaging that contains a marine pollutant must--
* * * * *
    (e) MARINE POLLUTANT mark. The MARINE POLLUTANT mark must conform 
to the following:
* * * * *
    (2) The marking must be in the form of a square-on-point. The 
symbol and border must be black on a white or suitable contrasting 
background. The width of the border forming the square-on-point marking 
must be at least 2 mm. Each side of the mark must be--
    (i) At least 100 mm (4 inches) as measured from the outside of the 
lines forming the border for marks applied to:
    (A) Non-bulk packages, except in the case of packages which, 
because of their size, can only bear smaller marks. If the size of the 
package so requires, the dimensions/line thickness may be reduced, 
provided the marking remains clearly visible. Where dimensions are not 
specified, all features shall be in approximate proportion to those 
shown.
* * * * *
    (3) Transitional exception--A marking in conformance with the 
requirements of this paragraph in effect on October 1, 2012, may 
continue to be used until December 31, 2016.
* * * * *
0
14. In Sec.  172.327, paragraph (a) is revised to read as follows:


Sec.  172.327  Petroleum sour crude oil in bulk packaging.

* * * * *
    (a) The marking must be durable, legible and of a size relative to 
the package as to be readily visible and similar to the illustration 
shown in this paragraph with the minimum dimension of each side of the 
marking at least 100 mm (3.9 inches) as measured from the outside of 
the lines forming the border. The width of the border forming the 
square-on-point marking must be at least 5 mm. The marking must be 
displayed at each location (e.g., manhole, loading head) where exposure 
to hydrogen sulfide vapors may occur.
    (1) Transitional exception--A marking in conformance with the 
requirements of this paragraph in effect on October 1, 2012, may 
continue to be used until December 31, 2016.
    (2) [Reserved]
* * * * *
0
15. In Sec.  172.407, paragraphs (c)(1) and (d)(2)(iii) are revised and 
paragraph (d)(2)(iv) is added to read as follows:


Sec.  172.407  Label specifications.

* * * * *
    (c) Size. (1) Each diamond (square-on-point) label prescribed in 
this subpart must be at least 100 mm (3.9 inches) on each side with 
each side having a solid line inner border 5 mm inside and parallel to 
the edge. The 5 mm measurement is from the outside edge of the label to 
the outside of the solid line forming the inner border. The width of 
the solid line forming the inner border must be at least 2 mm.
    (i) If the size of the package so requires, the dimensions of the 
label and its features may be reduced provided the symbol and other 
elements of the label remain clearly visible. The solid line forming 
the inner border must remain 5 mm from the outside edge of the label 
and the minimum width of the line must remain 2 mm.
    (ii) Where dimensions are not specified, all features shall be in 
approximate proportion to those shown in Sec. Sec.  172.411 through 
172.448 of this subpart, as appropriate.
    (iii) Transitional exception--A label in conformance with the 
requirements of this paragraph in effect on October 1, 2012, may 
continue to be used until December 31, 2016.
* * * * *
    (d) * * *
    (2) * * *
    (iii) White may be used for the symbol for the ORGANIC PEROXIDE 
label.
    (A) Inner border color--If white is used for the symbol for the 
ORGANIC PEROXIDE label then the solid line forming the inner border on 
the upper half of the label must also be white.
    (B) Transitional exception--A label in conformance with the 
requirements of this paragraph in effect on October 1, 2012, may 
continue to be used until December 31, 2016.
    (iv) The FLAMMABLE GAS label displayed on cylinders and gas 
cartridges for liquefied petroleum gases, where they may be shown in 
the background color of the receptacle if adequate contrast is 
provided.
* * * * *

[[Page 50819]]

0
16. In Sec.  172.512, paragraph (a)(3) is revised to read as follows:


Sec.  172.512  Freight containers and aircraft unit load devices.

    (a) * * *
    (3) Placarding is not required on a freight container or aircraft 
unit load device if it is only transported by air and is identified as 
containing a hazardous material in the manner provided in part 7, 
chapter 2, section 2.8, of the ICAO Technical Instructions (IBR, see 
Sec.  171.7 of this subchapter).
* * * * *
0
17. In Sec.  172.519, paragraph (c)(1) is revised to read as follows:


Sec.  172.519  General specifications for placards.

* * * * *
    (c) Size. (1) Each diamond (square-on-point) placard prescribed in 
this subpart must measure at least 250 mm (9.84 inches) on each side 
and must have a solid line inner border 12.5 mm inside and parallel to 
the edge. The 12.5 mm measurement is from the outside edge of the 
placard to the outside of the solid line forming the inner border.
    (i) Transitional exceptions--(A) A placard in conformance with the 
requirements of this paragraph in effect on October 1, 2012, may 
continue to be used until December 31, 2016.
    (B) For domestic transportation, a placard manufactured prior to 
January 1, 2017 in conformance with the requirements of this paragraph 
in effect on October 1, 2012, may continue in service until the end of 
its useful life provided the color tolerances are maintained and are in 
accordance with the display requirements of this subchapter.
    (ii) [Reserved]
* * * * *

PART 173--SHIPPERS--GENERAL REQUIREMENTS FOR SHIPMENTS AND 
PACKAGINGS

0
18. The authority citation for part 173 continues to read as follows:

    Authority: 49 U.S.C. 5101-5128, 44701; 49 CFR 1.81, 1.96 and 
1.97.

0
19. In Sec.  173.2a, paragraph (a)(1) is revised to read as follows:


Sec.  173.2a  Classification of a material having more than one hazard.

    (a) * * *
    (1) Class 7 (radioactive materials, other than limited quantities; 
and shipments of Uranium hexafluoride, radioactive material, excepted 
package, UN 3507).
* * * * *
0
20. In Sec.  173.3, paragraphs (c)(3) and (d)(3)(iv) are revised and 
paragraph (f) is added to read as follows:


Sec.  173.3  Packaging and exceptions.

* * * * *
    (c) * * *
    (3) Each salvage packaging must be marked with the proper shipping 
name of the hazardous material inside the packaging and the name and 
address of the consignee. In addition, the packaging must be marked 
``SALVAGE''. The lettering of the marking must be at least 12 mm (0.5 
inches) high.
    (i) Transitional exception--A marking in conformance with the 
requirements of this paragraph in effect on October 1, 2012, may 
continue to be used until December 31, 2016.
    (ii) Exception for permanently marked packagings. For domestic 
transportation, a packaging manufactured prior to January 1, 2017 and 
permanently marked (e.g., by embossing or through a heat stamp process) 
in conformance with the requirements of this paragraph in effect on 
October 1, 2012, may continue in service until the end of its useful 
life.
* * * * *
    (d) * * *
    (3) * * *
    (iv) The word ``SALVAGE'' in letters at least 12 mm (0.5 inches) 
high on opposite sides near the middle of the cylinder; stamping on the 
sidewall is not authorized.
    (A) Transitional exception--A marking in conformance with the 
requirements of this paragraph in effect on October 1, 2012, may 
continue to be used until December 31, 2016.
    (B) Exception for permanently marked packagings. For domestic 
transportation, a packaging manufactured prior to January 1, 2017 and 
permanently marked in conformance with the requirements of this 
paragraph in effect on October 1, 2012, may continue in service until 
the end of its useful life.
* * * * *
    (f) Large salvage packagings. Except for transportation by air, 
packages of hazardous materials that are damaged, defective, or 
leaking; packages found to be not conforming to the requirements of 
this subchapter after having been placed in transportation; and, 
hazardous materials that have spilled or leaked may be placed in a 
large salvage packaging that is compatible with the lading and shipped 
for repackaging or disposal under the following conditions:
    (1) Large salvage packagings must be tested and marked for Packing 
Group II or higher performance standards for large packagings intended 
for the transport of solids or inner packagings, except as follows:
    (i) The test substance used in performing the tests shall be water, 
and the large salvage packagings must be filled to not less than 98 
percent of their maximum capacity; and
    (ii) Large salvage packagings must have been successfully subjected 
to a leakproofness test of 30 kPA (4.4 psig).
    (2) Each large salvage packaging shall be provided when necessary 
with sufficient cushioning and absorption material to prevent excessive 
shifting of the contents and to eliminate the presence of any free 
liquid at the time the packaging is closed. All cushioning and 
absorbent material used in the large salvage packaging must be 
compatible with the hazardous material.
    (3) Each large salvage packaging must be marked with the proper 
shipping name of the hazardous material inside the packaging and the 
name and address of the consignee. In addition, the packaging must be 
marked ``SALVAGE''. The lettering of the marking must be at least 12 mm 
(0.5 inches) high.
    (4) Each large salvage packaging shall be labeled as prescribed for 
the respective material.
    (5) The shipper shall prepare shipping papers in accordance with 
subpart C of part 172 of this subchapter.
    (6) The overpack requirements of Sec.  173.25 do not apply to large 
salvage packagings used in accordance with this paragraph.
0
21. In Sec.  173.4a, paragraph (g)(2) is revised to read as follows:


Sec.  173.4a  Excepted quantities.

* * * * *
    (g) * * *
    (2) The marking must be durable and clearly visible and in the form 
of a square. The hatching must be of the same color, black or red on 
white or a suitable contrasting background. The minimum dimensions must 
not be less than 100 mm (3.9 inches) by 100 mm (3.9 inches) as measured 
from the outside of the hatching forming the border. Where dimensions 
are not specified, all features shall be in approximate proportion to 
those shown.
    (i) Transitional exception--A marking in conformance with the 
requirements of this paragraph in effect on October 1, 2012, may 
continue to be used until December 31, 2016.
    (ii) [Reserved]
* * * * *
0
22. In Sec.  173.9, paragraph (e)(1) is revised to read as follows:

[[Page 50820]]

Sec.  173.9  Transport vehicles or freight containers containing lading 
which has been fumigated.

* * * * *
    (e) FUMIGANT marking. (1) The FUMIGANT marking must consist of 
black letters on a white background that is a rectangle at least 400 mm 
(15.75 inches) wide and at least 300 mm (11.8 inches) high as measured 
to the outside of the lines forming the border of the marking. The 
minimum width of the line forming the forming the border must be 2 mm 
and the text on the marking must not be less than 25 mm high. Except 
for size and color, the FUMIGANT marking must be as shown in the 
following figure. Where dimensions are not specified, all features 
shall be in approximate proportion to those shown.
    (i) Transitional exception--A marking in conformance with the 
requirements of this paragraph in effect on October 1, 2012, may 
continue to be used until December 31, 2016.
    (ii) [Reserved]
BILLING CODE 4910-60-P
[GRAPHIC] [TIFF OMITTED] TP25AU14.000

BILLING CODE 4910-60-C

[[Page 50821]]

0
23. Section 173.11 is added to read as follows:


Sec.  173.11  Exceptions for shipment of lamps containing hazardous 
materials.

    The following lamps are not subject to any other requirements of 
this subchapter provided they do not contain Class 7 (radioactive) 
material:
    (a) Lamps that are collected directly from individuals and 
households when transported to a collection or recycling facility.
    (b) Lamps each containing not more than 1 g of hazardous materials 
and packaged so that there is not more than 30 g of hazardous materials 
per package. Each lamp must be packed in inner packagings separated by 
dividers, or surrounded by cushioning material to protect the lamps and 
packed into strong outer packagings meeting the requirements of Sec.  
173.24(b) of this part and capable of passing a 1.2 m (4 feet) drop 
test.
    (c) Used, damaged, defective lamps each containing not more than 1 
g of hazardous materials and packaged so that there is not more than 30 
g of hazardous materials per package when transported from a collection 
or recycling facility. The lamps must be packed in strong outer 
packagings meeting the requirements of Sec.  173.24(b) of this part and 
capable of passing a 1.2 m (4 feet) drop test.
    (d) Lamps containing only gases of Division 2.2 provided they are 
packaged so that the projectile effects of any rupture of the bulb will 
be contained within the package.
0
24. In Sec.  173.24, paragraph (c) is revised to read as follows:


Sec.  173.24  General requirements for packaging and packages.

* * * * *
    (c) Authorized packagings. (1) A packaging is authorized for a 
hazardous material only if--
    (i) The packaging is prescribed or permitted for the hazardous 
material in a packaging section specified for that material in Column 8 
of the Sec.  172.101 Hazardous Materials Table and conforms to 
applicable requirements in the special provisions of Column 7 of the 
Sec.  172.101 Hazardous Materials Table and, for specification 
packagings (but not including UN standard packagings manufactured 
outside the United States), the specification requirements in parts 178 
and 179 of this subchapter; or
    (ii) The packaging is permitted under, and conforms to, provisions 
contained in subparts B or C of part 171 of this subchapter or 
Sec. Sec.  173.3, 173.4, 173.4a, 173.4b, 173.5, 173.5a, 173.6, 173.7, 
173.8, 173.27, or Sec.  176.11 of this subchapter.
    (2) The use of supplementary packagings within an outer packaging 
(e.g., an intermediate packaging or a receptacle inside a required 
inner packaging) additional to what is required by this subchapter is 
authorized provided all applicable requirements of this subchapter are 
met and, if appropriate suitable cushioning is used to prevent movement 
within the packaging.
* * * * *
0
25. In Sec.  173.25, paragraph (a)(4) is revised to read as follows:


Sec.  173.25  Authorized packagings and overpacks.

    (a) * * *
    (4) The overpack is marked with the word ``OVERPACK'' when 
specification packagings are required, unless specification markings on 
the inside packages are visible. The lettering on the ``OVERPACK'' 
marking must be at least 12 mm (0.5 inches) high.
    (i) Transitional exception--A marking in conformance with the 
requirements of this paragraph in effect on October 1, 2012, may 
continue to be used until December 31, 2016.
    (ii) [Reserved]
* * * * *
0
26. In Sec.  173.62:
0
a. In paragraph (b), in the Explosives Table, the entry for UN0222 is 
revised; and
0
b. In paragraph (c), in the Table of Packing Methods, Packing 
Instructions 116, 117, 131, and 137 are revised.
    The revisions and addition read as follows:


Sec.  173.62  Specific packaging requirements for explosives.

* * * * *
    (b) * * *

                            Explosives Table
------------------------------------------------------------------------
           ID                               PI
------------------------------------------------------------------------
 
                                * * * * *
UN0222............................  112(b), 112(c) or 117.
 
                                * * * * *
------------------------------------------------------------------------

    (c) * * *

                                            Table of Packing Methods
----------------------------------------------------------------------------------------------------------------
        Packing instruction            Inner packagings        Intermediate  packagings       Outer packagings
----------------------------------------------------------------------------------------------------------------
 
                                                  * * * * * * *
116...............................  Bags.................  Not necessary..................  Bags.

[[Page 50822]]

 
PARTICULAR PACKING REQUIREMENTS OR  paper, water and oil                                       woven plastics
 EXCEPTIONS:                        resistant............                                       (5H1/2/3).
1. For UN0082, 0241, 0331 and       plastics.............                                   paper, multiwall,
 0332, inner packagings are not     textile, plastic                                         water resistant
 necessary if leakproof removable    coated or.                                              (5M2).
 head drums are used as the outer   lined................                                   plastics, film
 packaging.                         woven plastics, sift-                                    (5H4).
2. For UN0082, 0241, 0331 and        proof.                                                 textile, sift-proof
 0332, inner packagings are not     Receptacles..........                                    (5L2).
 required when the explosive is     fiberboard, water                                       textile, water
 contained in a material             resistant.                                              resistant (5L3).
 impervious to liquid.              metal................                                   Boxes.
3. For UN0081, inner packagings     plastics.............                                   steel (4A).
 are not required when contained    wood, sift-proof.....                                   aluminum (4B).
 in rigid plastic that is           Sheets...............                                   other metal (4N).
 impervious to nitric esters.       paper, water                                            wood, natural,
4. For UN0331, inner packagings      resistant.                                              ordinary (4C1).
 are not required when bags (5H2),  paper, waxed.........                                   natural wood, sift
 (5H3) or (5H4) are used as outer   plastics.............                                    proof walls (4C2).
 packagings.                                                                                plywood (4D).
5. Deleted                                                                                  reconstituted wood
6. For UN0081, bags must not be                                                              (4F).
 used as outer packagings                                                                   fiberboard (4G).
                                                                                            plastics, solid
                                                                                             (4H2).
                                                                                            Drums.
                                                                                            steel (1A1 or 1A2).
                                                                                            aluminum (1B1 or
                                                                                             1B2).
                                                                                            other metal (1N1 or
                                                                                             1N2).
                                                                                            plywood (1D). fiber
                                                                                             (1G).
                                                                                            plastics (1H1 or
                                                                                             1H2).
                                                                                            Jerricans.
                                                                                            steel (3A1 or 3A2).
                                                                                            plastics (3H1 or
                                                                                             3H2).
117...............................  Not necessary........  Not necessary..................  IBCs.
PARTICULAR PACKING REQUIREMENTS OR  .....................  ...............................     metal (11A),
 EXCEPTIONS:                                                                                    (11B), (11N),
1. This packing instruction may                                                                 (21A), (21B),
 only be used for explosives of                                                                 (21N), (31A),
 UN0082 when they are mixtures of                                                               (31B), (31N).
 ammonium nitrate or other                                                                  flexible (13H2),
 inorganic nitrates with other                                                               (13H3), (13H4),
 combustible substances that are                                                             (13L2), (13L3),
 not explosive ingredients. Such                                                             (13L4), (13M2).
 explosives must not contain                                                                rigid plastics
 nitroglycerin, similar liquid                                                               (11H1), (11H2),
 organic nitrates, liquid or solid                                                           (21H1), (21H2),
 nitrocarbons, or chlorates.                                                                 (31H1), (31H2).
2. This packing instruction may                                                             composite (11HZ1),
 only be used for explosives of                                                              (11HZ2), (21HZ1),
 UN0241 that consist of water as                                                             (21HZ2), (31HZ1),
 an essential ingredient and high                                                            (31HZ2).
 proportions of ammonium nitrate
 or other oxidizers, some or all
 of which are in solution. The
 other constituents may include
 hydrocarbons or aluminum powder,
 but must not include nitro-
 derivatives such as
 trinitrotoluene.
3. Metal IBCs must not be used for
 UN0082, UN0222 and UN0241.
4. Flexible IBCs may only be used
 for solids.
5. For UN0222, when other than
 metal or rigid plastics IBCs are
 used, they must be offered for
 transportation in a closed
 freight container or a closed
 transport vehicle.
6. For UN0222, flexible IBCs must
 be sift-proof and water-resistant
 or must be fitted with a sift-
 proof and water-resistant liner.
 
                                                  * * * * * * *
131...............................  Bags.................  Not necessary..................  Boxes.

[[Page 50823]]

 
PARTICULAR PACKING REQUIREMENTS OR  paper                                                      steel (4A).
 EXCEPTIONS:                        plastics.............                                   aluminum (4B).
1. For UN0029, 0267 and 0455, bags  Receptacles..........                                   other metal (4N).
 and reels may not be used as       fiberboard...........                                   wood, natural,
 inner packagings.                  metal................                                    ordinary (4C1).
2. For UN0030, 0255 and 0456,       plastics.............                                   natural wood, sift
 inner packagings are not required  wood.................                                    proof walls (4C2).
 when detonators are packed in      Reels................                                   plastics, solid
 pasteboard tubes, or when their                                                             (4H2).
 leg wires are wound on spools                                                              plywood (4D).
 with the caps either placed                                                                reconstituted wood
 inside the spool or securely                                                                (4F).
 taped to the wire on the spool,                                                            fiberboard (4G).
 so as to restrict free moving of                                                           Drums.
 the caps and to protect them from                                                          steel (1A1 or 1A2).
 impact forces.                                                                             Aluminum (1B1 or
3. For UN0360, 0361 and 0500,                                                                1B2).
 detonators are not required to be                                                          other metal (1N1 or
 attached to the safety fuse,                                                                1N2).
 metal-clad mild detonating cord,                                                           Plywood (1D).
 detonating cord, or shock tube.                                                            fiber (1G).
 Inner packagings are not required                                                          plastics (1H1 or
 if the packing configuration                                                                1H2).
 restricts free moving of the caps
 and protects them from impact
 forces.
 
                                                  * * * * * * *
137...............................  Bags.................  Not necessary..................  Boxes.
PARTICULAR PACKING REQUIREMENTS OR  plastics                                                   steel (4A).
 EXCEPTIONS:                        Boxes................                                   aluminum (4B).
For UN0059, 0439, 0440 and 0441,    fiberboard...........                                   other metal (4N).
 when the shaped charges are        wood.................                                   wood, natural,
 packed singly, the conical cavity  Tubes................                                    ordinary (4C1).
 must face downwards and the        fiberboard...........                                   wood, natural, sift
 package marked ``THIS SIDE UP''.   metal................                                    proof walls (4C2).
 When the shaped charges are        plastics.............                                   plastics, solid
 packed in pairs, the conical       Dividing partitions                                      (4H2).
 cavities must face inwards to       in the outer                                           plywood (4D).
 minimize the jetting effect in      packagings.                                            reconstituted wood
 the event of accidental                                                                     (4F).
 initiation.                                                                                fiberboard (4G).
                                                                                            Drums.
                                                                                            steel (1A1 or 1A2).
                                                                                            aluminum (1B1 or
                                                                                             1B2).
                                                                                            other metal (1N1 or
                                                                                             1N2).
                                                                                            plywood (1D).
                                                                                            fiber (1G).
                                                                                            plastics (1H1 or
                                                                                             1H2).
 
                                                  * * * * * * *
----------------------------------------------------------------------------------------------------------------

* * * * *
0
27. In Sec.  173.115, paragraph (m) is added to read as follows:


Sec.  173.115  Class 2, Divisions 2.1, 2.2, and 2.3--Definitions.

* * * * *
    (m) Adsorbed gas. A gas which when packaged for transport is 
adsorbed onto a solid porous material resulting in an internal 
receptacle pressure of less than 101.3 kPa at 20 [deg]C and less than 
300 kPa at 50 [deg]C.
0
28. In Sec.  173.121, paragraph (b)(1)(ii) is revised to read as 
follows:


Sec.  173.121  Class 3--Assignment of packing group.

* * * * *
    (b) * * *
    (1) * * *
    (ii) The mixture or any separated solvent does not contain any 
substances with a primary or a subsidiary risk of Division 6.1 or Class 
8;
* * * * *
0
29. In Sec.  173.127, paragraphs (a)(1) and (b) are revised to read as 
follows.


Sec.  173.127  Class 5, Division 5.1--Definition and assignment of 
packing groups.

    (a) * * *
    (1) A solid material is classed as a Division 5.1 material if, when 
tested in accordance with the UN Manual of Tests and Criteria (IBR, see 
Sec.  171.7 of this subchapter):
    (i) If test O.1 is used (UN Manual of Tests and Criteria, sub-
section 34.4.1), the mean burning time is less than or equal to the 
burning time of a 3:7 potassium bromate/cellulose mixture; or
    (ii) If test O.3 is used (UN Manual of Tests and Criteria, sub-
section 34.4.3), the mean burning rate is greater than or equal to the 
burning rate of a 1:2 calcium peroxide/cellulose mixture.
* * * * *
    (b) Assignment of packing groups. (1) The packing group of a 
Division 5.1 material which is a solid shall be assigned using the 
following criteria:
    (i) Packing Group I, for any material which, in either 
concentration tested:

[[Page 50824]]

    (A) If test O.1 is used (UN Manual of Tests and Criteria, sub-
section 34.4.1), the mean burning time is less than the mean burning 
time of a 3:2 potassium bromate/cellulose mixture; or
    (B) If test O.3 is used (UN Manual of Tests and Criteria, sub-
section 34.4.3), the mean burning rate is greater than the mean burning 
rate of a 3:1 calcium peroxide/cellulose mixture.
    (ii) Packing Group II, for any material which, in either 
concentration tested:
    (A) If test O.1 is used (UN Manual of Tests and Criteria, sub-
section 34.4.1), the mean burning time is less than the mean burning 
time of a 2:3 potassium bromate/cellulose mixture and the criteria for 
Packing Group I are not met; or
    (B) If test O.3 is used (UN Manual of Tests and Criteria, sub-
section 34.4.3), the mean burning rate is greater than the mean burning 
rate of a 1:1 calcium peroxide/cellulose mixture and the criteria for 
Packing Group I are not met.
    (iii) Packing Group III for any material which, in either 
concentration tested:
    (A) If test O.1 is used (UN Manual of Tests and Criteria, sub-
section 34.4.1), the mean burning time is less than the mean burning 
time of a 3:7 potassium bromate/cellulose mixture and the criteria for 
Packing Groups I and II are not met; or
    (B) If test O.3 is used (UN Manual of Tests and Criteria, sub-
section 34.4.3), the mean burning rate is greater than the mean burning 
rate of a 1:2 calcium peroxide/cellulose mixture and the criteria for 
Packing Groups I and II are not met.
    (iv) The materials is not classified as a Division 5.1 material if, 
in either concentration tested:
    (A) If test O.1 is used (UN Manual of Tests and Criteria, sub-
section 34.4.1), the sample tested does not ignite and exhibit burn, or 
exhibits a mean burning time of greater than or equal to the mean 
burning time of a 3:7 potassium bromate/cellulose mixture.
    (B) If test O.3 is used (UN Manual of Tests and Criteria, sub-
section 34.4.3), the sample tested does not ignite and exhibit burn, or 
exhibits a mean burning rate less than or equal to the mean burning 
rate of a 1:2 calcium peroxide/cellulose mixture.
* * * * *
0
30. In Sec.  173.151, revise paragraph (b) to read as follows:


Sec.  173.151  Exceptions for Class 4.

* * * * *
    (b) Limited quantities of Division 4.1. (1) Limited quantities of 
flammable solids (Division 4.1) in Packing Groups II and III and, where 
authorized by this section, charcoal briquettes (Division 4.2) in 
Packing Group III, are excepted from labeling requirements unless the 
material is offered for transportation or transported by aircraft, and 
are excepted from the specification packaging requirements of this 
subchapter when packaged in combination packagings according to this 
paragraph. If authorized for transportation by aircraft, the package 
must also conform to applicable requirements of Sec.  173.27 of this 
part (e.g., authorized materials, inner packaging quantity limits and 
closure securement) and only hazardous material authorized aboard 
passenger-carrying aircraft may be transported as a limited quantity. A 
limited quantity package that conforms to the provisions of this 
section is not subject to the shipping paper requirements of subpart C 
of part 172 of this subchapter, unless the material meets the 
definition of a hazardous substance, hazardous waste, marine pollutant, 
or is offered for transportation and transported by aircraft or vessel, 
and is eligible for the exceptions provided in Sec.  173.156 of this 
part. In addition, shipments of limited quantities are not subject to 
subpart F (Placarding) of part 172 of this subchapter. Each package 
must conform to the packaging requirements of subpart B of this part 
and may not exceed 30 kg (66 pounds) gross weight. Except for 
transportation by aircraft, the following combination packagings are 
authorized:
    (i) For flammable solids in Packing Group II, inner packagings not 
over 1.0 kg (2.2 pounds) net capacity each, packed in a strong outer 
packaging.
    (ii) For flammable solids in Packing Group III, inner packagings 
not over 5.0 kg (11 pounds) net capacity each, packed in a strong outer 
packaging.
    (2) For transportation by highway or rail, Charcoal briquettes 
(NA1361) may be packaged as a limited quantity in accordance with 
paragraph (b) of this section in packagings not exceeding 30 kg gross 
weight and are eligible for the exceptions provided in Sec.  173.156.
* * * * *
0
31. In Sec.  173.161, paragraph (b)(2) is revised to read as follows:


Sec.  173.161  Chemical kits and first aid kits.

* * * * *
    (b) * * *
    (2) The packing group assigned to the chemical kit and first aid 
kit as a whole must be the most stringent packing group assigned to any 
individual substance in the kit. Where the kit contains only hazardous 
materials to which no packing group is assigned, the packagings shall 
meet the Packing Group II performance level. The packing group must be 
shown on the shipping paper. Where the kit contains only hazardous 
materials to which no packing group is assigned, the packing group does 
not have to be indicated on the shipping paper.
* * * * *


Sec.  173.164  [Amended]

0
32. In Sec.  173.164, paragraph (a)(5) is removed and reserved:
0
33. Section 173.166 is revised to read as follows:


Sec.  173.166  Safety devices.

    For the purpose of this section, safety devices are articles which 
contain pyrotechnic substances or hazardous materials of other classes 
and are used in vehicles, vessels or aircraft to enhance safety to 
persons. Examples are: air bag inflators, air bag modules, seat-belt 
pretensioners and pyromechanical devices. Pyromechanical devices are 
assembled components for tasks such as but not limited to separation, 
locking, or release-and-drive or occupant restraint. The term includes 
``Safety devices, pyrotechnic''.
    (a) Definitions. An air bag inflator (consisting of a casing 
containing an igniter, a booster material, a gas generant and, in some 
cases, a pressure receptacle (cylinder)) is a gas generator used to 
inflate an air bag in a supplemental restraint system in a motor 
vehicle. An air bag module is the air bag inflator plus an inflatable 
bag assembly. A seat-belt pretensioner contains similar hazardous 
materials and is used in the operation of a seat-belt restraining 
system in a motor vehicle.
    (b) Classification. (1) Safety devices, excluding those which 
contain flammable or toxic gases or mixtures thereof, may be classed as 
Class 9 (UN3268) if the safety device, or if more than a single safety 
device is involved then the representative of the maximum parameters of 
each design type, is examined and successfully tested by a person or 
agency who is authorized by the Associate Administrator to perform 
examination and testing of explosives under Sec.  173.56(b)(1), and 
who:
    (i) Does not manufacture or market explosives or safety devices, is 
not owned in whole or in part, or is not financially dependent upon any 
entity that manufactures or markets explosives or safety devices;
    (ii) Performs all examination and testing in accordance with the 
applicable requirements as specified in special provision 160 (see 
Sec.  172.102 of this subchapter); and
    (iii) Maintains records in accordance with paragraph (g) of this 
section.

[[Page 50825]]

    (iv) By adhering to all the provisions specified in paragraph 
(b)(1) of this section, a Class 9 (UN3268) air bag inflator, air bag 
module or seat-belt pretensioner design is not required to be submitted 
to the Associate Administrator for approval or assigned an EX number. 
All other Class 9 (UN3268) safety device designs are required to be 
submitted to the Associate Administrator for approval and assigned an 
EX number;
    (2) A safety device may be classed as Division 1.4G if the maximum 
parameters of each design type has been examined and successfully 
tested by a person or agency who is authorized by the Associate 
Administrator to perform such examination and testing of explosives 
under Sec.  173.56(b)(1). As a Class 1 explosive, the manufacturer must 
submit to the Associate Administrator a report of the examination and 
assignment of a recommended shipping description, division, and 
compatibility group, and if the Associate Administrator finds the 
approval request meets the regulatory criteria, the explosive may be 
approved in writing and assigned an EX number; or
    (3) The manufacturer has submitted an application, including a 
classification issued by the competent authority of a foreign 
government to the Associate Administrator, and received written 
notification from the Associate Administrator that the device has been 
approved for transportation and assigned an EX number.
    (c) EX numbers. (1) When a safety device is offered for 
transportation, the shipping paper must contain the EX number or 
product code for each approved device in association with the basic 
description required by Sec.  172.202(a) of this subchapter. Product 
codes must be traceable to the specific EX number assigned to the 
device by the Associate Administrator. Further, if the EX number or 
product code is contained on the shipping paper then it is not required 
to be marked on the outside package.
    (2) An air bag inflator, air bag module or seat-belt pretensioner, 
when classed as a Class 9 (UN3268) under the terms of paragraph (b)(1) 
of this section, is excepted from the EX number requirements of this 
paragraph (c).
    (d) Exceptions. (1) A safety device that is classed as a Class 9 
(UN3268) under the terms of paragraph (b)(1) of this section and is 
installed in a motor vehicle, aircraft, boat or other transport 
conveyance or its completed components, such as steering columns or 
door panels, is not subject to the requirements of this subchapter. A 
safety device that has been classed as a Division 1.4G and approved by 
the Associate Administrator and is installed in a motor vehicle, 
aircraft, boat or other transport conveyance or its completed 
components, such as steering columns or door panels, is not subject to 
the requirements of this subchapter.
    (2) An air bag module containing an inflator that has been 
previously approved by the Associate Administrator for transportation 
is not required to be submitted for further examination or approval. 
For classifications granted after July 30, 2013, if the Class 9 
designation for the inflator is contingent upon packaging or other 
special means specified by the authorized testing agency, the modules 
must be tested and certified separately to determine if they can be 
shipped as ``UN3268, Safety Devices, 9, PG III''.
    (3) An air bag module containing an inflator that has previously 
been approved by the Associate Administrator as a Division 2.2 material 
is not required to be submitted for further examination to be reclassed 
as a Class 9 material.
    (4) Shipments to recycling or waste disposal facilities. When 
offered for domestic transportation by highway, rail freight, cargo 
vessel or cargo aircraft, a serviceable safety device classed as either 
Class 9 (UN3268) or Division 1.4G removed from a motor vehicle that was 
manufactured as required for use in the United States may be offered 
for transportation and transported without compliance with the shipping 
paper requirement prescribed in paragraph (c) of this section. However, 
when these articles are shipped to a recycling facility, the word 
``Recycled'' must be entered on the shipping paper immediately after 
the basic description prescribed in Sec.  172.202 of this subchapter. 
No more than one device is authorized in the packaging prescribed in 
paragraph (e)(1), (2), or (3) of this section. The device must be 
cushioned and secured within the package to prevent movement during 
transportation.
    (5) An air bag inflator, air bag module, or seat-belt pretensioner 
that was classed and approved for transportation prior to January 1, 
2015 may continue to be transported under the terms of the existing 
approval, using the appropriate proper shipping name ``Safety Devices'' 
or ``Safety Devices, Pyrotechnic'' based on the classification of the 
device as assigned by PHMSA or the authorized person or agency that 
examined and tested the design type.
    (e) Packagings. Rigid, outer packagings, meeting the general 
packaging requirements of part 173 are authorized as follows. 
Additionally, the UN specification packagings listed in paragraphs 
(e)(1) through (3) of this section must meet the packaging 
specification and performance requirements of part 178 of this 
subchapter at the Packing Group III performance level. The packagings 
must be designed and constructed to prevent movement of the articles 
and inadvertent activation. Further, if the Class 9 designation is 
contingent upon packaging specified by the authorized testing agency, 
shipments of the safety device must be in compliance with the 
prescribed packaging.
    (1) 1A2, 1B2, 1N2, 1D, 1G, or 1H2 drums.
    (2) 3A2, 3B2, or 3H2 jerricans.
    (3) 4A, 4B, 4N, 4C1, 4C2, 4D, 4F, 4G, 4H1, or 4H2 boxes.
    (4) Reusable high-strength containers or dedicated handling 
devices. (i) Reusable containers manufactured from high-strength 
plastic, metal, or other suitable material, or other dedicated handling 
devices are authorized for shipment of safety devices from a 
manufacturing facility to the assembly facility, subject to the 
following conditions:
    (A) The gross weight of the containers or handling devices may not 
exceed 1000 kg (2205 pounds). Containers or handling devices must 
provide adequate support to allow stacking at least three units high 
with no resultant damage;
    (B) If not completely enclosed by design, the container or handling 
device must be covered with plastic, fiberboard, metal, or other 
suitable material. The covering must be secured to the container by 
banding or other comparable methods; and
    (C) Internal dunnage must be sufficient to prevent movement of the 
devices within the container.
    (ii) Reusable containers manufactured from high-strength plastic, 
metal, or other suitable material, or other dedicated handling devices 
are authorized for shipment of safety devices only to, between, and 
from, intermediate handling locations, provided they meet the 
conditions specified in paragraphs (e)(4)(i)(A) through (C) of this 
section and:
    (A) The packages may be opened and re-packed by an intermediate 
handler as long as no modifications or changes are made to the 
packagings; and
    (B) Transportation must be made by private or contract carrier.
    (5) Packagings which were previously authorized in an approval 
issued by the Associate Administrator may continue to be used, provided 
a copy of the approval is maintained while such packaging is being 
used.

[[Page 50826]]

    (6) Safety Devices removed from a vehicle. When removed from, or 
were intended to be used in, a motor vehicle that was manufactured as 
required for use in the United States and offered for domestic 
transportation by highway to Recycling or Waste Disposal facilities, a 
serviceable safety device classed as Class 9 UN3268 may be offered for 
transportation and transported in the following additional packaging:
    (i) Specification and non-specification steel drums with a wall and 
lid thickness not less than 20 gauge. The lid must be securely affixed 
with a lever-locking or bolted-ring assembly. The lid of the drum must 
provide ventilation of the drum contents in a fire. The drum may be 
filled with any combination of safety devices to a capacity not greater 
than fifty (50) percent of the drum's total volume. In addition, inner 
packagings or cushioning may not be used to fill the void space; or
    (ii) Outer packaging consisting of 4H2 solid plastic boxes or non-
specification rugged reusable plastic outer packaging and inner static-
resistant plastic bags or trays. If not completely enclosed by design, 
the container or handling device must be covered with plastic, 
fiberboard, metal or other suitable material. The covering must be 
secured to the container by banding or other comparable methods. The 
articles must be packed to prevent movement within the container during 
transportation.
    (f) Labeling. Notwithstanding the provisions of Sec.  172.402 of 
this subchapter, each package or handling device must display a CLASS 9 
label. Additional labeling is not required when the package contains no 
hazardous materials other than the devices.
    (g) Recordkeeping requirements. (1) Following the examination of 
each new design type classed as a Class 9 in accordance with paragraph 
(b)(1) of this section, the person that conducted the examination must 
prepare a test report and provide the test report to the manufacturer 
of the safety device. At a minimum, the test report must contain the 
following information:
    (i) Name and address of the test facility;
    (ii) Name and address of the applicant;
    (iii) Manufacturer of the device. For a foreign manufacturer, the 
U.S. agent or importer must be identified;
    (iv) A test report number, drawing of the device, and description 
of the safety device in sufficient detail to ensure that the test 
report is traceable (e.g. a unique product identifier) to a specific 
design;
    (v) The tests conducted and the results; and
    (vi) A certification that the safety device is classed as a Class 9 
(UN3268).
    (2) For at least fifteen (15) years after testing, a copy of each 
test report must be maintained by the authorizing testing agency. For 
as long as any safety device design is being manufactured, and for at 
least fifteen (15) years thereafter, a copy of each test report must be 
maintained by the manufacturer of the product.
    (3) Test reports must be made available to a representative of the 
Department upon request.
0
34. In section 173.167, paragraph (a)(4) is revised to read as follows:


Sec.  173.167  Consumer commodities.

    (a) * * *
    (4) Drop test capability. Breakable inner packagings (e.g., glass, 
earthenware, or brittle plastic) must be packaged to prevent failure 
under conditions normally incident to transport. Packages of consumer 
commodities as prepared for transport must be capable of withstanding a 
1.2 m drop on solid concrete in the position most likely to cause 
damage. The criteria for passing the test are that the outer packaging 
must not exhibit any damage liable to affect safety during transport 
and there must be no leakage from the inner packaging(s).
* * * * *
0
35. Section Sec.  173.176 is revised to read as follows:


Sec.  173.176  Capacitors.

    (a) Capacitors, including capacitors containing an electrolyte that 
does not meet the definition of any hazard class or division as defined 
in this part, must conform to the following requirements:
    (1) Except for asymmetric capacitors, capacitors not installed in 
equipment must be transported in an uncharged state.
    (2) Each capacitor or module must be protected against a potential 
short circuit hazard in transport as follows:
    (i) Except for asymmetric capacitors, when a capacitor's energy 
storage capacity is less than or equal to 10 Wh or when the energy 
storage capacity of each capacitor in a module is less than or equal to 
10 Wh, the capacitor or module must be protected against short circuit 
or be fitted with a metal strap connecting the terminals; or
    (ii) Except for asymmetric capacitors, when the energy storage 
capacity of a capacitor or a capacitor in a module is more than 10 Wh, 
the capacitor or module must be fitted with a metal strap connecting 
the terminals.
    (iii) When an asymmetric capacitor's energy storage capacity is 
greater than 0.3 Wh, or when the energy storage capacity of each 
capacitor in a module is greater than 0.3 Wh, the capacitor or module 
must be protected against short circuit.
    (3) Capacitors containing an electrolyte that meets the definition 
of one or more hazard class or division as defined in this part, must 
be designed to withstand a 95 kPa (0.95 bar, 14 psi) pressure 
differential.
    (4) Capacitors must be designed and constructed to safely relieve 
pressure that may build up in use, through a vent or a weak point in 
the capacitor casing. Any liquid that is released upon venting must be 
contained by the packaging or by the equipment in which a capacitor is 
installed.
    (5) Capacitors must be marked with the energy storage capacity in 
Wh as follows:
    (i) Except for asymmetric capacitors, capacitors manufactured after 
December 31, 2013; or
    (ii) Asymmetric capacitors manufactured after December 31, 2015.
    (b) Capacitors must be packed in strong outer packagings. For 
transport by air, capacitors must be securely cushioned within the 
outer packagings. Capacitors installed in equipment may be offered for 
transport unpackaged or on pallets, when the capacitors are afforded 
equivalent protection by the equipment in which they are contained.
    (c) Capacitors containing an electrolyte not meeting the definition 
of any hazard class or division as defined in this part, including when 
configured in a module or when installed in equipment, are not subject 
to any other requirements of this subchapter.
    (d) Except for asymmetric capacitors, capacitors containing an 
electrolyte that meets the definition of one or more hazard class or 
division as defined in this part, with an energy storage capacity of 10 
Wh or less are not subject to any other requirements of this 
subchapter, when they are capable of withstanding a 1.2 m (3.9 feet) 
drop test unpackaged onto a rigid, non-resilient, flat and horizontal 
surface without loss of contents.
    (e) Asymmetric capacitors containing an electrolyte that meets the 
definition of one or more hazard class or division as defined in this 
part, with an energy storage capacity of 20 Wh or less, including when 
configured in a module, are not subject to other provisions of this 
subchapter when the capacitors are capable of withstanding a 1.2 meter 
(3.9 feet) drop test unpackaged onto a rigid, non-resilient, flat and 
horizontal surface without loss of contents.
    (f) Except for asymmetric capacitors, capacitors containing an 
electrolyte meeting the definition of one or more hazard class or 
division as defined in

[[Page 50827]]

this part, that are not installed in equipment, and with an energy 
storage capacity of more than 10 Wh are subject to the requirements of 
this subchapter.
    (g) Asymmetric capacitors containing an electrolyte meeting the 
definition of one or more hazard class or division as defined in this 
part, that are not installed in equipment, and with an energy storage 
capacity of more than 20 Wh are to the requirements of this subchapter.
    (h) Capacitors installed in equipment and containing an electrolyte 
meeting the definition of one or more hazard class or division as 
defined in this part, are not subject to any other requirements of this 
subchapter, provided the equipment is packaged in a strong outer 
packaging and in such a manner as to prevent accidental functioning of 
the capacitors during transport. Large, robust equipment containing 
capacitors may be offered for transport unpackaged or on pallets when 
the capacitors are afforded equivalent protection by the equipment in 
which they are contained.
0
36. In Sec.  173.181, paragraph (c) is revised to read as follows:


Sec.  173.181  Pyrophoric materials (liquids).

* * * * *
    (c) Steel drums (1A1 or 1A2), aluminum drums (1B1 or 1B2), metal 
drums, other than steel or aluminum (1N1 or 1N2) or fiber drums (1G); 
steel jerricans (3A1 or 3A2) or aluminum jerricans (3B1 or 3B2); or 
steel boxes (4A), aluminum boxes (4B) or metal boxes, other than steel 
or aluminum (4N) not exceeding 220 L (58 gallons) capacity each with 
strong, tight inner metal cans not over 4.0 L (1 gallon) capacity each. 
The strong, tight metal cans must be closed by positive means, not 
friction.
    (1) Inner packagings must have no opening exceeding 25 mm (1 inch) 
diameter and must be surrounded with noncombustible cushioning 
material.
    (2) Net quantity of pyrophoric liquids may not exceed two-thirds of 
the rated capacity of the outer drum. For example, a 220 L (58 gallons) 
outer drum may contain no more than 147 L (39 gallons) of pyrophoric 
liquids.
    (3) Each layer of inner containers must be separated by a metal 
plate separator in addition to cushioning material.
0
37. In Sec.  173.185,
0
a. Paragraph (b)(6) is added;
0
b. Paragraphs (c)(1)(iii) and (c)(4)(v) are revised; and
0
d. Paragraph (f)(3) is revised.
    The revisions and addition read as follows:


Sec.  173.185  Lithium cells and batteries.

* * * * *
    (b) * * *
    (6) Except for transportation by aircraft, the following rigid 
large packagings are authorized for a single battery, including for a 
battery contained in equipment, meeting provisions (b)(1) and (2) of 
this section and the requirements of part 178, subparts P and Q, of 
this subchapter at the Packing Group II level:
    (i) Metal (50A, 50B, 50N);
    (ii) Rigid plastic (50H);
    (iii) Wooden (50C, 50D, 50F);
    (iv) Rigid fiberboard (50G).
    (c) * * *
    (1) * * *
    (iii) Except when lithium metal cells or batteries are packed with 
or contained in equipment in quantities less than 5 kg net weight, the 
outer package that contains lithium metal cells or batteries must be 
marked: ``PRIMARY LITHIUM BATTERIES--FORBIDDEN FOR TRANSPORT ABOARD 
PASSENGER AIRCRAFT'' or ``LITHIUM METAL BATTERIES--FORBIDDEN FOR 
TRANSPORT ABOARD PASSENGER AIRCRAFT, or labeled with a CARGO AIRCRAFT 
ONLY label specified in Sec.  172.448 of this subchapter.
* * * * *
    (4) * * *
    (v) A package that exceeds the number or quantity (mass) limits in 
the table shown in (c)(4) is subject to all applicable requirements of 
this subchapter, except that a package containing no more than 2.5 kg 
lithium metal cells or batteries or 10 kg lithium ion cells or 
batteries is not subject to the UN performance packaging requirements 
in paragraphs (b)(3)(ii) of this section when the package displays both 
the lithium battery handling marking and the Class 9 label.
* * * * *
    (f) * * *
    (3) Each inner packaging must be individually placed in one of the 
following packagings meeting the applicable requirements of part 178, 
subparts L, M, P and Q of this subchapter at the Packing Group I level:
    (i) Metal (4A, 4B, 4N), wooden (4C1, 4C2, 4D, 4F), or solid plastic 
(4H2) box;
    (ii) Metal (1A2, 1B2, 1N2), plywood (1D), or plastic (1H2) drum; or
    (iii) Except for transportation by aircraft, for a single large 
battery or for a single battery contained in equipment, the following 
rigid large packagings are authorized:
    (A) Metal (50A, 50B, 50N);
    (B) Rigid plastic (50H);
    (C) Plywood (50D); and
* * * * *
0
38. In Sec.  173.199, paragraph (a)(5) introductory text is revised, 
paragraph (a)(5)(i) and reserved paragraph (a)(5)(ii) are added to read 
as follows:


Sec.  173.199  Category B infectious substances.

* * * * *
    (a) * * *
    (5) The following square-on-point mark must be displayed on the 
outer packaging on a background of contrasting color. The width of the 
line forming the border must be at least 2 mm (0.08 inches) and the 
letters and numbers must be at least 6 mm (0.24 inches) high. The size 
of the mark must be such that no side of the diamond is less than 50 mm 
(1.97 inches) in length as measured from the outside of the lines 
forming the border. The proper shipping name ``Biological substances, 
Category B'' must be marked on the outer packaging adjacent to the 
diamond-shaped mark in letters that are at least 6 mm (0.24 inches) 
high.
    (i) Transitional exception--A marking in conformance with the 
requirements of this paragraph in effect on October 1, 2012, may 
continue to be used until December 31, 2016.
    (ii) [Reserved]
* * * * *
0
39. In Sec.  173.225, in the paragraph (g) Organic Peroxide Portable 
Tank Table, the last entry in the table is revised to read as follows:


Sec.  173.225  Packaging requirements and other provisions for organic 
peroxides.

* * * * *
    (g) * * *

                                                          Organic Peroxide Portable Tank Table
--------------------------------------------------------------------------------------------------------------------------------------------------------
                                                Minimum shell
              Hazardous       Minimum  test    thickness (mm-    Bottom opening    Pressure relief                         Control          Emergency
 UN No.       material       pressure  (bar)  reference steel)  requirements See  requirements See   Filling limits      temperature       temperature
                                                  See . . .           . . .             . . .
--------------------------------------------------------------------------------------------------------------------------------------------------------
          [REVISE]........

[[Page 50828]]

 
 
                                                                      * * * * * * *
          Peroxyacetic      4...............  Sec.              Sec.              Sec.              Not more than     +30 [deg]C......  +35 [deg]C.
           acid,                               178.274(d)(2).    178.275(d)(3).    178.275(g)(1).    90% at 59
           distilled,                                                                                [deg]F (15
           stabilized, not                                                                           [deg]C).
           more than 41%
           \1\.
--------------------------------------------------------------------------------------------------------------------------------------------------------
\1\ ``Corrosive'' subsidiary risk placard is required.

* * * * *
0
40. Section 173.231 is added to subpart E to read as follows


Sec.  173.231  Ammonium nitrate emulsion, suspension or gel.

    (a) Packagings for non-bulk shipments of Ammonium nitrate 
emulsions, suspensions and gels must conform to the general packaging 
requirements of subpart B of part 173, to the requirements of part 178 
of this subchapter at the Packing Group I or II performance level, and 
the requirements of the special provisions of column 7 of the Sec.  
172.101 table.
    (1) The following combination packagings are authorized:
    (i) Outer packagings:

Drums: 1B2, 1G, 1N2, 1H2 or 1D
Boxes: 4B, 4C1, 4C2, 4D, 4G or 4H2
Jerricans: 3B2 of 3H2

    (ii) Inner Packagings:

Glass, plastic or metal inner receptacles

    (2) For combination packagings, the capacity of each inner 
packaging must not exceed 5 liters (1.3 gallons) and the maximum 
authorized net weight of each outer packaging is 125 kg (275 pounds).
    (3) The following single packagings are authorized:
    (i) Drums: 1B1, 1B2, 1H1 or 1H2 with a maximum capacity of 250 
liters (66 gallons)
    (ii) Jerricans: 3B1, 3B2, 3H1 or 3H2 with a maximum capacity if 60 
liters (15.9 gallons)
    (iii) Plastic receptacle in aluminum, fiber, plastic or plywood 
drum: 6HB1, 6HG1, 6HH1 or 6HD1 with the outer drum having a maximum 
capacity of 250 liters (66 gallons).
    (iv) Plastic receptacle in aluminum wood, plywood, fiberboard, or 
solid plastic box: 6HB2, 6HC, 6HD2, 6HG2, or 6HH2 with the outer box 
having a maximum capacity of 60 liters (15.9 gallons).
    (v) Glass receptacle in aluminum, fiber, or plywood drum: 6PB1, 
6PF1 or 6PD1 with the outer drum having a maximum capacity of 60 liters 
(15.9 gallons).
    (vi) Glass receptacle in expanded plastic or solid plastic 
packaging: 6PH1 or 6PH2 with the outer packaging having a maximum 
capacity of 60 liters (15.9 gallons).
    (vii) Glass receptacle in aluminum, wood, or fiberboard box, or 
wickerwork hamper: 6PB2, 6PC, 6PG2 or 6PD2 with the outer box or hamper 
having a maximum capacity of 60 liters (15.9 gallons).
0
41. In Sec.  173.301b, paragraphs (c)(1) and (c)(2)(ii) and (iii) are 
revised to read as follows:


Sec.  173.301b  Additional general requirements for shipment of UN 
pressure receptacles.

* * * * *
    (c) Pressure receptacle valve requirements. (1) When the use of a 
valve is prescribed, the valve must conform to the requirements in ISO 
10297:2006 (IBR, see Sec.  171.7 of this subchapter). Until December 
31, 2008, the manufacture of a valve conforming to the requirements in 
ISO 10297:1999 (IBR, see Sec.  171.7 of this subchapter) is authorized.
    (2) * * *
    (ii) By equipping the UN pressure receptacle with a valve cap 
conforming to the requirements in ISO 11117:2008 and Technical 
Corrigendum 1 (IBR, see Sec.  171.7 of this subchapter). Until December 
31, 2014, the manufacture of a valve cap conforming to the requirements 
in ISO 11117:1998 (IBR, see Sec.  171.7 of this subchapter) is 
authorized. The cap must have vent-holes of sufficient cross-sectional 
area to evacuate the gas if leakage occurs at the valve;
    (iii) By protecting the valves by shrouds or guards conforming to 
the requirements in ISO 11117:2008 and Technical Corrigendum 1 (IBR; 
see Sec.  171.7 of this subchapter). Until December 31, 2014, the 
manufacture of a shroud or guard conforming to the requirements in ISO 
11117:1998 (IBR, see Sec.  171.7 of this subchapter) is authorized. For 
metal hydride storage systems, by protecting the valves in accordance 
with the requirements in ISO 16111 (IBR; see Sec.  171.7 of this 
subchapter).
* * * * *
0
42. In Sec.  173.302, the section heading and paragraph (a) are revised 
to read as follows:


Sec.  173.302  Filling of cylinders with nonliquefied (permanent) 
compressed gases or adsorbed gases.

    (a) General requirements. (1) A cylinder filled with a non-
liquefied compressed gas (except gas in solution) must be offered for 
transportation in accordance with the requirements of this section and 
Sec.  173.301. In addition, a DOT specification cylinder must meet the 
requirements in Sec. Sec.  173.301a, 173.302a and 173.305, as 
applicable. UN pressure receptacles must meet the requirements in 
Sec. Sec.  173.301b and 173.302b, as applicable. Where more than one 
section applies to a cylinder, the most restrictive requirements must 
be followed.
    (2) Adsorbed gas. A cylinder filled with an adsorbed gas must be 
offered for transportation in accordance with the requirements of 
subsection (d) this section, Sec.  173.301, and Sec.  173.302c. UN 
pressure receptacles must meet the requirements in Sec. Sec.  173.301b 
and 173.302b, as applicable. Where more than one section applies to a 
cylinder, the most restrictive requirements must be followed.
* * * * *
0
43. Section 173.302c is added to read as follows:


Sec.  173.302c  Additional requirements for the shipment of adsorbed 
gases in UN pressure receptacles.

    (a) General. A cylinder filled with an adsorbed gas must be offered 
for transportation in UN pressure receptacles subject to the 
requirements in this section and Sec.  173.302. In addition, the 
requirements in Sec. Sec.  173.301 and 173.301b must be met.

[[Page 50829]]

    (b) The pressure of each filled cylinder must be less than 101.3 
kPa at 20 [deg]C and must not exceed 300 kPa at 50 [deg]C.
    (c) The minimum test pressure of the cylinder must be 21 bar.
    (d) The minimum burst pressure of the cylinder must be 94.5 bar.
    (e) The internal pressure at 65 [deg]C of the filled cylinder must 
not exceed the test pressure of the cylinder.
    (f) The adsorbent material must be compatible with the cylinder and 
must not form harmful or dangerous compounds with the gas to be 
adsorbed. The gas in combination with the adsorbent material must not 
affect or weaken the cylinder or cause a dangerous reaction (e.g., a 
catalyzing reaction).
    (g) The quality of the adsorbent must be verified at the time of 
each fill to assure the pressure and chemical stability requirements of 
this packing instruction are met each time an adsorbed gas package is 
offered for transport.
    (h) The adsorbent material must not meet the definition of any 
other hazard class.
    (i) Requirements for cylinders and closures containing toxic gases 
with an LC50 less than or equal to 200 ml/m3 (ppm) (see the following 
Adsorbed Gases Table) must be as follows:
    (1) Valve outlets must be fitted with pressure retaining gas-tight 
plugs or caps having threads matching those of the valve outlets.
    (2) Each valve must either be of the packless type with non-
perforated diaphragm, or be of a type which prevents leakage through or 
past the packing.
    (3) Each cylinder and closure must be tested for leakage after 
filling.
    (4) Each valve must be capable of withstanding the test pressure of 
the cylinder and be directly connected to the cylinder by either a 
taper-thread or other means which meets the requirements of ISO 10692-2 
(IBR, see Sec.  171.7 of this subchapter)
    (5) Cylinders and valves must not be fitted with a pressure relief 
device.
    (j) Valve outlets for cylinders containing pyrophoric gases must be 
fitted with gas-tight plugs or caps having threads matching those of 
the valve outlets.
    (k) The filling procedure must be in accordance with Annex A of ISO 
11513 (IBR, see Sec.  171.7 of this subchapter).
    (l) The maximum period for periodic requalification must be in 
accordance with Sec.  180.207(c) of this subchapter.

                          Adsorbed Gases Table
------------------------------------------------------------------------
       ID No.         Hazardous material   LC50 ml/m\3\        Notes
------------------------------------------------------------------------
3510...............  Adsorbed gas,        ..............               z
                      flammable, n.o.s.
3511...............  Adsorbed gas, n.o.s  ..............               z
3512...............  Adsorbed gas,                <=5000               z
                      toxic, n.o.s.
3513...............  Adsorbed gas,        ..............               z
                      oxidizing, n.o.s.
3514...............  Adsorbed gas,                <=5000               z
                      toxic, flammable,
                      n.o.s.
3515...............  Adsorbed gas,                <=5000               z
                      toxic, oxidizing,
                      n.o.s.
3516...............  Adsorbed gas,                <=5000               z
                      toxic, corrosive,
                      n.o.s.
3517...............  Adsorbed gas,                <=5000               z
                      toxic, flammable,
                      corrosive, n.o.s.
3518...............  Adsorbed gas,                <=5000               z
                      toxic, oxidizing,
                      corrosive, n.o.s.
3519...............  Boron trifluoride,              387               a
                      adsorbed.
3520...............  Chlorine, adsorbed.             293               a
3521...............  Silicon                         450               a
                      tetrafluoride,
                      adsorbed.
3522...............  Arsine, adsorbed...              20               d
3523...............  Germane, adsorbed..             620            d, r
3524...............  Phosphorus                      190  ..............
                      pentafluoride,
                      adsorbed.
3525...............  Phosphine, adsorbed              20               d
3526...............  Hydrogen selenide,                2  ..............
                      adsorbed.
------------------------------------------------------------------------
Notes: a: Aluminum alloy cylinders must not be used.
d: When steel cylinders are used, only those bearing the ``H'' mark in
  accordance with Sec.   173.302b(f) are authorized.
r: The filling of this gas must be limited such that, if complete
  decomposition occurs, the pressure does not exceed two thirds of the
  test pressure of the cylinder.
z: The construction materials of the cylinders and their accessories
  must be compatible with the contents and must not react to form
  harmful or dangerous compounds therewith.

0
44. In Sec.  173.307, paragraphs (a)(5) and (6) are revised to read as 
follows:


Sec.  173.307  Exceptions for compressed gases.

    (a) * * *
    (5) Manufactured articles or apparatuses, other than lamps, each 
containing not more than 100 mg (0.0035 ounce) of inert gas and 
packaged so that the quantity of inert gas per package does not exceed 
1 g (0.35 ounce).
    (6) Light bulbs, provided they are packaged so that the projectile 
effects of any rupture of the bulb will be contained within the 
package. This exception does not apply to lamps as described in Sec.  
173.11 of this part.
* * * * *
0
45. In Sec.  173.309, introductory text and paragraph (e) are added to 
read as follows:


Sec.  173.309  Fire extinguishers.

    This section applies to portable fire extinguishers for manual 
handling and operation, fire extinguishers for installation in 
aircraft, and large fire extinguishers. Large fire extinguishers 
include fire extinguishers mounted on wheels for manual handling; fire 
extinguishing equipment or machinery mounted on wheels or wheeled 
platforms or units transported similar to (small) trailers; and fire 
extinguishers composed of a non-rollable pressure drum and equipment, 
and handled e.g. by fork lift or crane when loaded or unloaded.
* * * * *
    (e) Large fire extinguishers may be transported unpackaged provided 
the requirements of Sec.  173.24(b) of this part are met, the valves 
are protected in accordance with Sec.  173.301(c)(2)(i), (ii), (iii), 
or (v) and other equipment mounted on the fire extinguisher is 
protected to prevent accidental activation.
0
46. In Sec.  173.403, the definition of Exclusive use and Freight 
container are revised to read as follows:

[[Page 50830]]

Sec.  173.403  Definitions.

* * * * *
    Exclusive use means sole use by a single consignor of a conveyance 
for which all initial, intermediate, and final loading and unloading 
and shipment are carried out in accordance with the direction of the 
consignor or consignee where required by this subchapter. The consignor 
and the carrier must ensure that any loading or unloading is performed 
by personnel having radiological training and resources appropriate for 
safe handling of the consignment. The consignor must provide to the 
initial carrier specific written instructions for maintenance of 
exclusive use shipment controls, including the vehicle survey 
requirement of Sec.  173.443(c) as applicable, and include these 
instructions with the shipping paper information provided to the 
carrier by the consignor.
* * * * *
    Freight container means a reusable container having a volume of 
1.81 cubic meters (64 cubic feet) or more, designed and constructed to 
permit it being lifted with its contents intact and intended primarily 
for containment of packages in unit form during transportation. A 
``small freight container'' is one which has an internal volume of not 
more than 3.0 cubic meters (106 cubic feet). All other freight 
containers are designated as ``large freight containers.''
* * * * *
0
47. In Sec.  173.420 paragraph (d) is revised to read as follows:


Sec.  173.420  Uranium hexafluoride (fissile, fissile excepted and non-
fissile).

* * * * *
    (d) Uranium hexafluoride not exceeding the limits specified in the 
limited quantity package limits column of table 4 in Sec.  173.425 may 
be classified under UN 3507 Uranium hexafluoride, radioactive material, 
excepted package, less than 0.1 kg (0.22 pounds) per package, non-
fissile or fissile-excepted provided that:
    (1) The mass of uranium hexafluoride in the package is less than 
0.1 kg (0.22 pounds); and
    (2) The conditions of Sec. Sec.  173.24, 173.24a, and 173.421(a)(1) 
and (4) are met.

PART 175--CARRIAGE BY AIRCRAFT

0
48. The authority citation for part 175 continues to read as follows:

    Authority: 49 U.S.C. 5101-5128, 44701; 49 CFR 1.81 and 1.97.

0
49. In Sec.  175.9, paragraphs (b)(6) introductory text and (b)(6)(v) 
are revised to read as follows:


Sec.  175.9  Special aircraft operations.

* * * * *
    (b) * * *
    (6) Hazardous materials that are loaded and carried on or in cargo 
only aircraft, and that are to be dispensed or expended during flight 
for weather control, environmental restoration or protection, forest 
preservation and protection, fire fighting and prevention, flood 
control, avalanche control, landslide clearance, or ice jam control 
purposes, when the following requirements are met:
* * * * *
    (v) When Division 1.1, 1.2, and 1.3 materials (except detonators 
and detonator assemblies) and detonators or detonator assemblies are 
carried for avalanche control, landslide clearance, or ice jam control 
flights, the explosives must be handled by, and at all times be under 
the control of, a qualified blaster. When required by a State or local 
authority, the blaster must be licensed and the State or local 
authority must be identified in writing to the FAA Principal Operations 
Inspector assigned to the operator.
0
50. In Sec.  175.10, paragraphs (a)(11) and (24) are revised and 
(a)(18)(iii) is added to read as follows:


Sec.  175.10  Exceptions for passengers, crewmembers, and air 
operators.

    (a) * * *
    (11) A single self-inflating personal safety device such as a life 
jacket or vest fitted with no more than two small gas cartridges 
(containing no hazardous material other than a Div. 2.2 gas) for 
inflation purposes plus no more than two spare cartridges. The personal 
safety device and spare cartridges may be carried in carry-on or 
checked baggage, with the approval of the aircraft operator, and must 
be packed in such a manner that it cannot be accidently activated.
* * * * *
    (18) * * *
    (iii) Articles containing lithium metal or lithium ion cells or 
batteries the primary purpose of which is to provide power to another 
device must be carried as spare batteries in accordance with the 
provisions of this paragraph.
* * * * *
    (24) Small cartridges fitted into devices with no more than four 
small cartridges of carbon dioxide or other suitable gas in Division 
2.2, without subsidiary risk with the approval of the operator. The 
water capacity of each cartridge must not exceed 50 mL (equivalent to a 
28 g cartridge).
* * * * *
0
51. In Sec.  175.25, paragraphs (b) and (c) are revised to read as 
follows:


Sec.  175.25  Notification at air passenger facilities of hazardous 
materials restrictions.

    (a) * * *
    (b) Ticket purchase. An aircraft operator must ensure that 
information on the types of hazardous materials which a passenger is 
forbidden to transport aboard an aircraft is presented at the point of 
ticket purchase or, if this is not practical, made available in another 
manner to passengers prior to the check-in process. Information 
provided via the Internet may be in text or pictorial form but must be 
such that ticket purchase cannot be completed until the passenger, or a 
person acting on their behalf, has been presented with this information 
and indicated that they have understood the restrictions on hazardous 
materials in baggage.
    (c) Check-in. When the flight check-in process is conducted 
remotely (e.g., via the Internet) or when completed at the airport, 
without assistance from another person (e.g., automated check-in 
kiosk), the aircraft operator must ensure that information on the types 
of hazardous materials a passenger is forbidden to transport aboard an 
aircraft is presented to passengers. Information may be in text or in 
pictorial form but must be such that the check-in process cannot be 
completed until the passenger, or a person acting on their behalf, has 
been presented with this information and indicated that they have 
understood the restrictions on hazardous materials in baggage.
* * * * *


Sec.  175.30  [Amended]

0
52. In Sec.  175.30, paragraphs (a)(5) and paragraph (e)(1) are removed 
and paragraphs (e)(2) and (3) are redesignated as (e)(1) and (2), 
respectively.
0
53. In Sec.  175.33, paragraph (a)(1)(i) is revised and paragraphs 
(a)(12) and (c)(5) are removed.
    The revision reads as follows:


Sec.  175.33  Shipping paper and notification of pilot-in-command.

    (a) * * *
    (1) * * *
    (i) Section 172.101 of this subchapter. Except for the requirement 
to indicate the type of package or technical name, any additional 
description requirements provided in Sec. Sec.  172.202, and 172.203 of 
this subchapter must also be shown on the notification.
* * * * *


Sec.  175.630  [Amended]

0
54. In Sec.  175.630, paragraph (a) is removed and reserved.
0
55. In Sec.  175.705, paragraph (c) is revised to read as follows:

[[Page 50831]]

Sec.  175.705  Radioactive contamination.

* * * * *
    (c) An aircraft in which Class 7 (radioactive) material has been 
released must be taken out of service and may not be returned to 
service or routinely occupied until the aircraft is checked for 
radioactive substances and it is determined that any radioactive 
substances present do not meet the definition of radioactive material, 
as defined in Sec.  173.403 of this subchapter, and it is determined in 
accordance with Sec.  173.443 of this subchapter that the dose rate at 
every accessible surface must not exceed 0.005 mSv per hour (0.5 mrem 
per hour) and there is no significant removable surface contamination.
* * * * *

PART 176--CARRIAGE BY VESSEL

0
56. The authority citation for part 176 continues to read as follows:

    Authority:  49 U.S.C. 5101-5128; 49 CFR 1.81 and 1.97.

0
57. In Sec.  176.80, paragraph (b) is revised to read as follows:


Sec.  176.80  Applicability.

* * * * *
    (b) Hazardous materials in limited quantities when loaded in 
transport vehicles and freight containers, are excepted from the 
segregation requirements of this subpart and any additional segregation 
specified in this subchapter for transportation by vessel; except that 
articles of division 1.4, compatibility group S, shall not be stowed in 
the same compartment or hold, or cargo transport unit with hazardous 
materials of Class 1 of compatibility groups A and L.
0
58. In Sec.  176.83, table 176.83b is revised to read as follows:


Sec.  176.83  Segregation.

* * * * *

                                        Table 176.83(b)--General Segregation Requirements for Hazardous Materials
                [Segregation must also take account of a single secondary hazard label, as required by paragraph (a)(6) of this section.]
--------------------------------------------------------------------------------------------------------------------------------------------------------
                                                                     1.1
                               Class                                 1.2  1.3  1.4  2.1  2.2  2.3   3   4.1  4.2  4.3  5.1  5.2  6.1  6.2   7    8    9
                                                                     1.5       1.6
--------------------------------------------------------------------------------------------------------------------------------------------------------
Explosives, 1.1, 1.2, 1.5..........................................  (*)  (*)  (*)    4    2    2    4    4    4    4    4    4    2    4    2    4    X
Explosives, 1.3....................................................  (*)  (*)  (*)    4    2    2    4    3    3    4    4    4    2    4    2    2    X
Explosives, 1.4, 1.6...............................................  (*)  (*)  (*)    2    1    1    2    2    2    2    2    2    X    4    2    2    X
Flammable gases 2.1................................................    4    4    2    X    X    X    2    1    2    2    2    2    X    4    2    1    X
Non-toxic, non-flammable gases 2.2.................................    2    2    1    X    X    X    1    X    1    X    X    1    X    2    1    X    X
Poisonous gases 2.3................................................    2    2    1    X    X    X    2    X    2    X    X    2    X    2    1    X    X
Flammable liquids 3................................................    4    4    2    2    1    2    X    X    2    2    2    2    X    3    2    X    X
Flammable solids 4.1...............................................    4    3    2    1    X    X    X    X    1    X    1    2    X    3    2    1    X
Spontaneously combustible substances 4.2...........................    4    3    2    2    1    2    2    1    X    1    2    2    1    3    2    1    X
Substances which are dangerous when wet 4.3........................    4    4    2    2    X    X    2    X    1    X    2    2    X    2    2    1    X
Oxidizing substances 5.1...........................................    4    4    2    2    X    X    2    1    2    2    X    2    1    3    1    2    X
Organic peroxides 5.2..............................................    4    4    2    2    1    2    2    2    2    2    2    X    1    3    2    2    X
Poisons 6.1........................................................    2    2    X    X    X    X    X    X    1    X    1    1    X    1    X    X    X
Infectious substances 6.2..........................................    4    4    4    4    2    2    3    3    3    2    3    3    1    X    3    3    X
Radioactive materials 7............................................    2    2    2    2    1    1    2    2    2    2    1    2    X    3    X    2    X
Corrosives 8.......................................................    4    2    2    1    X    X    X    1    1    1    2    2    X    3    2    X    X
Miscellaneous dangerous substances 9...............................    X    X    X    X    X    X    X    X    X    X    X    X    X    X    X    X    X
--------------------------------------------------------------------------------------------------------------------------------------------------------
Numbers and symbols relate to the following terms as defined in this section:
1--``Away from.''
2--``Separated from.''
3--``Separated by a complete compartment or hold from.''
4--``Separated longitudinally by an intervening complete compartment or hold from.''
X--The segregation, if any, is shown in the Sec.   172.101 table.
*--See Sec.   176.144 of this part for segregation within Class 1.

* * * * *
0
59. In Sec.  176.84, the section heading is revised and in the table in 
paragraph (b), footnote 3 is added to stowage codes 12 and 13 and 
provisions 147 and 148 are added to read as follows:


Sec.  176.84  Other requirements for stowage, cargo handling, and 
segregation for cargo vessels and passenger vessels.

* * * * *
    (b) * * *

 
------------------------------------------------------------------------
             Code                              Provisions
------------------------------------------------------------------------
 
                              * * * * * * *
12............................  Keep as cool as reasonably
                                 practicable.\3\
13............................  Keep as dry as reasonably
                                 practicable.\3\
 
                              * * * * * * *
147...........................  Stow ``separated from'' flammable gases
                                 and flammable liquids.
148...........................  In addition: from flammable gases and
                                 flammable liquids when stowed on deck
                                 of a containership a minimum distance
                                 of two container spaces athwartship
                                 shall be maintained, when stowed on ro-
                                 ro ships a distance of 6 m athwartship
                                 shall be maintained.
 
                              * * * * * * *
------------------------------------------------------------------------
 
  * * * * * * *
\3\ These requirements apply to the loading of hazardous materials in
  cargo transport units as well as the stowage of cargo transport units.


[[Page 50832]]

* * * * *
0
60. In Sec.  176.905, paragraphs (i)(1) through (5) are revised and 
paragraph (i)(6) is added to read as follows:


Sec.  176.905  Stowage of motor vehicles or mechanical equipment.

* * * * *
    (i) * * *
    (1) The vehicle or mechanical equipment has an internal combustion 
engine using liquid fuel that has a flashpoint less than 38 [deg]C 
(100[emsp14][deg]F), the fuel tank is empty, installed batteries are 
protected from short circuit, and the engine is run until it stalls for 
lack of fuel;
    (2) The vehicle or mechanical equipment has an internal combustion 
engine using liquid fuel that has a flashpoint of 38 [deg]C 
(100[emsp14][deg]F) or higher, the fuel tank contains 450 L (119 
gallons) of fuel or less, installed batteries are protected from short 
circuit, and there are no fuel leaks in any portion of the fuel system;
    (3) The vehicle or mechanical equipment is stowed in a hold or 
compartment designated by the administration of the country in which 
the vessel is registered as specially designed and approved for 
vehicles and mechanical equipment and there are no signs of leakage 
from the battery, engine, fuel cell, compressed gas cylinder or 
accumulator, or fuel tank, as appropriate. For vehicles with batteries 
connected and fuel tanks containing gasoline transported by U.S. 
vessels, see 46 CFR 70.10-1 and 90.10-38;
    (4) The vehicle or mechanical equipment is electrically powered 
solely by wet electric storage batteries (including non-spillable 
batteries) or sodium batteries and the installed batteries are 
protected from short circuit;
    (5) The vehicle or mechanical equipment is equipped with liquefied 
petroleum gas or other compressed gas fuel tanks, the tanks are 
completely emptied of liquefied or compressed gas and the positive 
pressure in the tank does not exceed 2 bar (29 psig), the fuel shut-off 
or isolation valve is closed and secured, and installed batteries are 
protected from short circuit; or
    (6) The vehicle or mechanical equipment is powered by a fuel cell 
engine, the engine is protected from inadvertent operation by closing 
fuel supply lines or by other means, and the fuel supply reservoir has 
been drained and sealed.
* * * * *

PART 178--SPECIFICATIONS FOR PACKAGINGS

0
61. The authority citation for part 178 continues to read as follows:

    Authority: 49 U.S.C. 5101-5128; 49 CFR 1.81 and 1.97.

0
62. In Sec.  178.71:
0
a. Paragraphs (a), (d)(2), (g)(1) through (3), and (k)(1)(i) and (ii) 
are revised;
0
b. Paragraphs (n) through (s) are redesignated as paragraphs (o) 
through (t), respectively;
0
c. New paragraph (n) is added;
0
d. Newly redesignated paragraph (o) is revised; and
0
e. Paragraphs (u) and (v) are added.
    The revisions and additions read as follows:


Sec.  178.71  Specifications for UN pressure receptacles.

* * * * *
    (a) General. Each UN pressure receptacle must meet the requirements 
of this section. UN pressure receptacles and service equipment 
constructed according to the standards applicable at the date of 
manufacture may continue in use subject to the continuing qualification 
and maintenance provisions of part 180 of this subchapter. Requirements 
for approval, qualification, maintenance, and testing are contained in 
Sec.  178.70, and subpart C of part 180 of this subchapter.
* * * * *
    (d) * * *
    (2) Service equipment must be configured or designed to prevent 
damage that could result in the release of the pressure receptacle 
contents during normal conditions of handling and transport. Manifold 
piping leading to shut-off valves must be sufficiently flexible to 
protect the valves and the piping from shearing or releasing the 
pressure receptacle contents. The filling and discharge valves and any 
protective caps must be secured against unintended opening. The valves 
must conform to ISO 10297:2006 (IBR, see Sec.  171.7 of this 
subchapter), or ISO 13340 (IBR, see Sec.  171.7 of this subchapter) for 
non-refillable pressure receptacles, and be protected as specified in 
Sec.  173.301b(f) of this subchapter. Until December 31, 2008, the 
manufacture of a valve conforming to the requirements in ISO 10297:1999 
(IBR, see Sec.  171.7 of this subchapter) is authorized.
* * * * *
    (g) * * *
    (1) ISO 9809-1: Gas cylinders--Refillable seamless steel gas 
cylinders--Design, construction and testing--Part 1: Quenched and 
tempered steel cylinders with tensile strength less than 1100 MPa. 
(IBR, see Sec.  171.7 of this subchapter). Until December 31, 2018, the 
manufacture of a cylinder conforming to the requirements in ISO 9809-
1:1999 (IBR, see Sec.  171.7 of this subchapter) is authorized.
    (2) ISO 9809-2: Gas cylinders--Refillable seamless steel gas 
cylinders--Design, construction and testing--Part 2: Quenched and 
tempered steel cylinders with tensile strength greater than or equal to 
1100 MPa. (IBR, see Sec.  171.7 of this subchapter). Until December 31, 
2018, the manufacture of a cylinder conforming to the requirements in 
ISO 9809-2:2000 (IBR, see Sec.  171.7 of this subchapter) is 
authorized.
    (3) ISO 9809-3: Gas cylinders--Refillable seamless steel gas 
cylinders--Design, construction and testing--Part 3: Normalized steel 
cylinders. (IBR, see Sec.  171.7 of this subchapter). Until December 
31, 2018, the manufacture of a cylinder conforming to the requirements 
in ISO 9809-3:2000 (IBR, see Sec.  171.7 of this subchapter) is 
authorized.
* * * * *
    (k) * * *
    (1) * * *
    (i) ISO 9809-1: Gas cylinders--Refillable seamless steel gas 
cylinders--Design, construction and testing--Part 1: Quenched and 
tempered steel cylinders with tensile strength less than 1100 MPa. 
Until December 31, 2018, the manufacture of a cylinder conforming to 
the requirements in ISO 9809-1:1999 (IBR, see Sec.  171.7 of this 
subchapter) is authorized.
    (ii) ISO 9809-3: Gas cylinders--Refillable seamless steel gas 
cylinders--Design, construction and testing--Part 3: Normalized steel 
cylinders. Until December 31, 2018, the manufacture of a cylinder 
conforming to the requirements in ISO 9809-3:2000 (IBR, see Sec.  171.7 
of this subchapter) is authorized.
* * * * *
    (n) Design and construction requirements for UN cylinders for the 
transportation of adsorbed gases. In addition to the general 
requirements of this section, UN cylinders for the transportation of 
adsorbed gases must conform to the following ISO standards, as 
applicable: ISO 11513:2011, Gas cylinders--Refillable welded steel 
cylinders containing materials for sub-atmospheric gas packaging 
(excluding acetylene)--Design, construction, testing, use and periodic 
inspection, or ISO 9809-1:2010: Gas cylinders--Refillable seamless 
steel gas cylinders--Design, construction and testing--Part 1: Quenched 
and tempered steel

[[Page 50833]]

cylinders with tensile strength less than 1100 MPa. (IBR, see Sec.  
171.7 of this subchapter.)
    (o) Material compatibility. In addition to the material 
requirements specified in the UN pressure receptacle design and 
construction ISO standards, and any restrictions specified in part 173 
for the gases to be transported, the requirements of the following 
standards must be applied with respect to material compatibility:
    (1) ISO 11114-1:2012: Gas cylinders--Compatibility of cylinder and 
valve materials with gas contents--Part 1: Metallic materials. (IBR, 
see Sec.  171.7 of this subchapter).
    (2) ISO 11114-2: Transportable gas cylinders--Compatibility of 
cylinder and valve materials with gas contents--Part 2: Non-metallic 
materials. (IBR, see Sec.  171.7 of this subchapter).
* * * * *
    (u) Marking of bundles of cylinders. (1) Individual cylinders in a 
bundle of cylinders must be marked in accordance with paragraphs (q), 
(r), (s), and (t) of this section as appropriate.
    (2) Refillable UN bundles of cylinders must be marked clearly and 
legibly with certification, operational, and manufacturing marks. These 
marks must be permanently affixed (e.g., stamped, engraved, or etched) 
on a plate permanently attached to the frame of the bundle of 
cylinders. Except for the ``UN'' mark, the minimum size of the marks 
must be 5 mm. The minimum size of the ``UN'' mark must be 10 mm. A 
refillable UN bundle of cylinders must be marked as follows:
    (i) The UN packaging symbol.
    [GRAPHIC] [TIFF OMITTED] TP25AU14.001
    
    (ii) The ISO standard, for example ISO 9809-1, used for design, 
construction and testing. Acetylene cylinders must be marked to 
indicate the porous mass and the steel shell, for example: ``ISO 3807-
2/ISO 9809-1.''
    (iii) The mark of the country where the approval is granted. The 
letters ``USA'' must be marked on UN pressure receptacles approved by 
the United States. The manufacturer must obtain an approval number from 
the Associate Administrator. The manufacturer approval number must 
follow the country of approval mark, separated by a slash (for example, 
USA/MXXXX). Pressure receptacles approved by more than one national 
authority may contain the mark of each country of approval, separated 
by a comma.
    (iv) The identity mark or stamp of the IIA.
    (v) The date of the initial inspection, the year (four digits) 
followed by the month (two digits) separated by a slash, for example 
``2006/04''.
    (vi) The test pressure in bar, preceded by the letters ``PH'' and 
followed by the letters ``BAR''.
    (vii) For pressure receptacles intended for the transport of 
compressed gases and UN 1001 acetylene, dissolved, the working pressure 
in bar, proceeded by the letters ``PW''.
    (viii) For liquefied gases, the water capacity in liters expressed 
to three significant digits rounded down to the last digit, followed by 
the letter ``L''. If the value of the minimum or nominal water capacity 
is an integer, the digits after the decimal point may be omitted.
    (ix) The total mass of the frame of the bundle and all permanently 
attached parts (cylinders, manifolds, fittings and valves). Bundles 
intended for the carriage of UN 1001 acetylene, dissolved must bear the 
tare mass as specified in clause N.4.2 of ISO 10961:2010.
    (x) The country of manufacture. The letters ``USA'' must be marked 
on cylinders manufactured in the United States.
    (xi) The serial number assigned by the manufacturer.
    (xii) For steel pressure receptacles, the letter ``H'' showing 
compatibility of the steel, as specified in 1SO 11114-1.
    (v) Marking sequence. The marking required by paragraph (u) of this 
section must be placed in three groups as follows:
    (1) The top grouping contains manufacturing marks and must appear 
consecutively in the sequence given in paragraphs (u)(2)(x) through 
(xii) of this section as applicable.
    (2) The middle grouping contains operational marks described in 
paragraphs (u)(2)(vi) through (ix) of this section as applicable. When 
the operational mark specified in paragraph (u)(2)(vii) is required, it 
must immediately precede the operational mark specified in paragraph 
(u)(2)(vi).
    (3) The bottom grouping contains certification marks and must 
appear consecutively in the sequence given in paragraphs (u)(2)(i) 
through (v) of this section as applicable.
0
63. In Sec.  178.75, paragraphs (d)(3)(i) through (iii) and are revised 
to read as follows:


Sec.  178.75  Specifications for MEGCs.

* * * * *
    (d) * * *
    (3) * * *
    (i) ISO 9809-1: Gas cylinders--Refillable seamless steel gas 
cylinders--Design, construction and testing--Part 1: Quenched and 
tempered steel cylinders with tensile strength less than 1100 MPa. 
(IBR, see Sec.  171.7 of this subchapter). Until December 31, 2018, the 
manufacture of a cylinder conforming to the requirements in ISO 9809-
1:1999 (IBR, see Sec.  171.7 of this subchapter) is authorized;
    (ii) ISO 9809-2: Gas cylinders--Refillable seamless steel gas 
cylinders--Design, construction and testing--Part 2: Quenched and 
tempered steel cylinders with tensile strength greater than or equal to 
1100 MPa. (IBR, see Sec.  171.7 of this subchapter). Until December 31, 
2018, the manufacture of a cylinder conforming to the requirements in 
ISO 9809-2:2000 (IBR, see Sec.  171.7 of this subchapter) is 
authorized;
    (iii) ISO 9809-3: Gas cylinders--Refillable seamless steel gas 
cylinders--Design, construction and testing--Part 3: Normalized steel 
cylinders. (IBR, see Sec.  171.7 of this subchapter). Until December 
31, 2018, the manufacture of a cylinder conforming to the requirements 
in ISO 9809-3:2000 (IBR, see Sec.  171.7 of this subchapter) is 
authorized; or
* * * * *
0
64. In Sec.  178.703, paragraph (b)(7)(iii) is revised to read as 
follows:


Sec.  178.703  Marking of IBCs.

* * * * *
    (b) * * *
    (7) * * *
    (iii) The symbol must be a square with each side being not less 
than 100 mm (3.9 inches) by 100 mm (3.9 inches) as measured from the 
corner printer marks shown on the figures in paragraph (b)(7)(i) of 
this section. Where dimensions are not specified, all features must be 
in approximate proportion to those shown.
    (A) Transitional exception--A marking in conformance with the 
requirements of this paragraph in effect on October 1, 2012, may 
continue to be applied to all IBCs manufactured, repaired or 
remanufactured between January 1, 2011 and December 31, 2016.
    (B) [Reserved]
* * * * *
0
65. In Sec.  178.910, paragraphs (a)(1)(ii) is revised, paragraph 
(a)(2)(iv) is added, paragraph (b) introductory text is revised, and 
paragraphs (b)(1) and reserved (b)(2) are added to read as follows:


Sec.  178.910  Marking of Large Packagings.

* * * * *
    (a) * * *

[[Page 50834]]

    (1) * * *
    (ii) The code number designating the Large Packaging design type 
according to Sec.  178.905. The letters ``T'' or ``W'' may follow the 
Large Packaging design type identification code on a Large Packaging. 
Large Salvage Packagings conforming to the requirements of subpart P of 
this part must be marked with the letter ``T''. Large Packagings must 
be marked with the letter ``W'' when the Large Packaging differs from 
the requirements in subpart P of this part, or is tested using methods 
other than those specified in this subpart, and is approved by the 
Associate Administrator in accordance with the provisions in Sec.  
178.955;
    (iii) * * *
    (2) * * *
    (iv) For a steel Large Salvage Packaging suitable for stacking; 
stacking load: 2,500 kg; maximum gross mass: 1,000 kg.
[GRAPHIC] [TIFF OMITTED] TP25AU14.002

    (b) All Large Packages manufactured, repaired or remanufactured 
after January 1, 2015 must be marked with the symbol applicable to a 
Large Package designed for stacking or not designed for stacking, as 
appropriate. The symbol must be a square with each side being not less 
than 100 mm (3.9 inches) by 100 mm (3.9 inches) as measured from the 
corner printer marks shown on the following figures. Where dimensions 
are not specified, all features must be in approximate proportion to 
those shown.
* * * * *
    (1) Transitional exception--A marking in conformance with the 
requirements of this paragraph in effect on October 1, 2012, may 
continue to be applied to all IBCs manufactured, repaired or 
remanufactured between January 1, 2015 and December 31, 2016.
    (2) [Reserved]
* * * * *

PART 180--CONTINUING QUALIFICATION AND MAINTENANCE OF PACKAGINGS

0
66. The authority citation for part 180 continues to read as follows:

    Authority: 49 U.S.C. 5101-5128; 49 CFR 1.81 and 1.97.

0
67. In Sec.  180.207, in paragraph (c), an entry is added to the end of 
Table 1 and paragraph (d)(5) is added to read as follows:


Sec.  180.207  Requirements for requalification of UN pressure 
receptacles.

* * * * *
    (c) * * *







      Table 1--Requalification Intervals of UN Pressure Receptacles
------------------------------------------------------------------------
                                    UN pressure receptacles/ hazardous
        Interval (years)                        materials
------------------------------------------------------------------------
 
                                * * * * *
5..............................  Pressure receptacles used for adsorbed
                                  gases.
------------------------------------------------------------------------

    (d) * * *
    (5) UN cylinders for adsorbed gases: Each UN cylinder for adsorbed 
gases must be inspected and tested in accordance with Sec.  173.302c 
and ISO 11513:2011 (IBR, see Sec.  171.7 of this subchapter).

    Issued in Washington, DC, under authority delegated in 49 CFR 
part 106.
William S. Schoonover,
Deputy Associate Administrator.
[FR Doc. 2014-19161 Filed 8-22-14; 8:45 am]
BILLING CODE 4910-60-P


