
[Federal Register Volume 78, Number 4 (Monday, January 7, 2013)]
[Rules and Regulations]
[Pages 987-1100]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2012-31243]



[[Page 987]]

Vol. 78

Monday,

No. 4

January 7, 2013

Part II





Department of Transportation





-----------------------------------------------------------------------





Pipeline and Hazardous Materials Safety Administration





-----------------------------------------------------------------------





49 CFR Parts 171, 172, 173, et al.





Hazardous Materials: Harmonization with International Standards (RRR), 
Harmonization with the United Nations, and Transportation of Lithium 
Batteries; Final Rules and Proposed Rule

  Federal Register / Vol. 78 , No. 4 / Monday, January 7, 2013 / Rules 
and Regulations  

[[Page 988]]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Pipeline and Hazardous Materials Safety Administration

49 CFR Parts 171, 172, 173, 175, 176, 177, and 178

[Docket Nos. PHMSA-2012-0027 (HM-215L)]
RIN 2137-AE87


Hazardous Materials: Harmonization with International Standards 
(RRR)

AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), 
DOT.

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: PHMSA is amending the Hazardous Materials Regulations to 
maintain alignment with international standards by incorporating 
various amendments, including changes to proper shipping names, hazard 
classes, packing groups, special provisions, packaging authorizations, 
air transport quantity limitations, and vessel stowage requirements. 
These revisions are necessary to harmonize the Hazardous Materials 
Regulations (HMR) with recent changes made to the International 
Maritime Dangerous Goods (IMDG) Code, the International Civil Aviation 
Organization's Technical Instructions for the Safe Transport of 
Dangerous Goods by Air (ICAO Technical Instructions), and the United 
Nations Recommendations on the Transport of Dangerous Goods--Model 
Regulations (UN Model Regulations) and address a petition for 
rulemaking.

DATES: Effective Date: January 1, 2013.
    Voluntary compliance date: PHMSA is authorizing voluntary 
compliance beginning January 1, 2013.
    Delayed compliance date: Unless otherwise specified, compliance 
with the amendments adopted in this final rule is required beginning 
January 1, 2014.
    Incorporation by reference date: The incorporation by reference of 
certain publications listed in this rule is approved by the Director of 
the Federal Register as of January 1, 2013.

FOR FURTHER INFORMATION CONTACT: Vincent Babich or Shane Kelley, 
International Standards, telephone (202) 366-8553, Pipeline and 
Hazardous Materials Safety Administration, U.S. Department of 
Transportation, 1200 New Jersey Avenue SE., 2nd Floor, Washington, DC 
20590-0001.

SUPPLEMENTARY INFORMATION:
I. Executive Summary
II. Background
III. Comment Discussion
IV. Section-by-Section Review
V. Regulatory Analyses and Notices
    A. Statutory/Legal Authority for the Rulemaking
    B. Executive Orders 12866 and 13563 and DOT Regulatory Policies 
and Procedures
    C. Executive Order 13132
    D. Executive Order 13175
    E. Regulatory Flexibility Act, Executive Order 13272, and DOT 
Policies and Procedures
    F. Paperwork Reduction Act
    G. Regulatory Identifier Number (RIN)
    H. Unfunded Mandates Reform Act
    I. Environment Assessment
    J. Privacy Act
    K. Executive Order 13609 and International Trade Analysis

I. Executive Summary

    In this final rule, PHMSA is amending the Hazardous Materials 
Regulations (HMR; 49 CFR Parts 171-180) to incorporate changes adopted 
in the IMDG Code, the ICAO Technical Instructions, and the UN Model 
Regulations, effective January 1, 2013. These changes ensure the 
domestic hazard classification, hazard communication and packaging 
requirements are consistent with those employed throughout the world.
    Federal law and policy strongly favor the harmonization of domestic 
and international standards for hazardous materials transportation. The 
Federal hazardous materials transportation law (Federal hazmat law; 49 
U.S.C. 5101 et seq.) directs PHMSA to participate in relevant 
international standard-setting bodies and encourages alignment of the 
HMR with international transport standards to the extent practicable 
while recognizing that deviations may at times be necessary to be 
consistent with the public interest (see 49 U.S.C. 5120). Harmonization 
facilitates international trade by minimizing the costs and other 
burdens of complying with multiple or inconsistent safety requirements 
for transportation of hazardous materials. Harmonization has also 
become increasingly important as the volume of hazardous materials 
transported in international commerce grows. Safety is often enhanced 
by creating a uniform framework for compliance. PHMSA actively 
participates in relevant international standard-setting bodies and 
promotes the adoption of standards consistent with the high safety 
standards set by the HMR.
    The foreign trade of chemicals is a large segment of the United 
States economy. In 2000, U.S. foreign trade in chemicals totaled $154 
billion and generated a $6 billion positive trade balance. The 
consistency of regulations reduces regulatory compliance costs and 
helps to avoid costly frustrations of international shipments. PHMSA's 
continued leadership in maintaining consistency with international 
regulations enhances the hazardous materials safety program and assists 
in maintaining a favorable trade balance.

II. Background

    PHMSA published a notice of proposed rulemaking (NPRM) under Docket 
HM-215L (77 FR 49167, August 15, 2012) to incorporate various 
amendments to harmonize the HMR with recent changes to the UN Model 
Regulations, the IMDG Code, and the ICAO Technical Instructions. When 
considering alignment of the HMR with international standards, we 
review and evaluate each amendment on its own merit, on the basis of 
its overall impact on transportation safety, and on the basis of the 
economic implications associated with its adoption into the HMR. Our 
goal is to harmonize without diminishing the level of safety currently 
provided by the HMR or imposing undue burdens on the regulated 
community.
    Based on this review and evaluation, in this final rule, PHMSA is 
amending the HMR to incorporate changes from the 17th Revised Edition 
of the UN Model Regulations, Amendment 36-12 to the IMDG Code, and the 
2013-2014 ICAO Technical Instructions, which become effective January 
1, 2013 (The IMDG Code is effective January 1, 2013; however, the 
previous amendment may continue to be used until January 1, 2014). 
Notable amendments to the HMR in this final rule include the following:
     Update references to international regulations including 
the ICAO Technical Instructions, the International Convention for the 
Safety of Life at Sea, the IMDG Code, the UN Model Regulations, the UN 
Manual of Tests and Criteria the Canadian Transportation of Dangerous 
Goods Regulations and various technical standards.
     Add, revise, or remove certain proper shipping names, 
hazard classes, packing groups, special provisions, packaging 
authorizations, bulk packaging requirements, and passenger and cargo 
aircraft maximum quantity limits from the Hazardous Materials Table 
(HMT).
     Adopt new HMT entries for chemical under pressure and 
specify acceptable bulk and non-bulk packagings, filling limits and 
appropriate segregation requirements.
     Adopt an exception for the transport of aircraft batteries 
aboard passenger aircraft in excess of the quantity limits specified in 
column 9A of the HMT.

[[Page 989]]

     Revise the vessel stowage provisions in column 10 of the 
Sec.  172.101 Hazardous Materials Table (HMT).
     Adopt minimum size requirements for the ``UN'' or ``NA'' 
markings specified in Sec.  172.301.
     Adopt changes throughout Part 173 (packaging requirements) 
to: (1) authorize the use of wood as a material of package construction 
for certain explosives; (2) authorize the use of metals other than 
steel or aluminum for drums and boxes; and (3) where appropriate, 
permit the use of non-removable head drums in those instances where 
removable head drums are otherwise authorized.
     Adopt a new packaging definition, operational controls, 
performance-oriented standards, and testing requirements for Flexible 
Bulk Containers (FBCs).

III. Comment Discussion

    In response to PHMSA's August 15, 2012 NPRM (77 FR 49167), PHMSA 
received comments from the following organizations and individuals:
     3M Company (3M)
     Airline Pilots Association, International (ALPA)
     Caterpillar Inc. (Caterpillar)
     Chemically Speaking LLC (Chemically Speaking)
     Council on Safe Transport of Hazardous Articles (COSTHA)
     Dangerous Goods Advisory Council (DGAC)
     Dow Chemical Company (Dow)
     Fuel Cell & Hydrogen Energy Association (FCHEA)
     Healthcare Waste Institute (HWI)
     Horizon Lines (Horizon)
     International Vessel Operators Dangerous Goods Association 
(IVODGA)
     Jamie Lee Guzman
     Mercotac Inc.
     Nora
     Nucon International Inc. (Nucon)
     PRBA-The Rechargeable Battery Association (PRBA)
     Saft America (Saft)
     Sporting Arms and Ammunition Manufacturing Institute 
(SAAMI)
     Stericycle, Inc. (Stericycle)
     United Airlines (United)
     United Parcel Service (UPS)
     VaporLok Products, LLC (Vaporlok)
     Veolia ES Technical Solutions, L.L.C. (Veolia)
    Below is a listing of major amendments to the international 
transportation regulations that we proposed for adoption into the HMR, 
a brief synopsis of the comments we received regarding those proposals 
and PHMSA's position regarding the comments. Additional comments are 
addressed in the section-by-section analysis section.
Incorporation by Reference
    In the NPRM, PHMSA proposed to incorporate by reference the latest 
editions of various international transport standards including the 
2013-2014 ICAO Technical Instructions, Amendment 36-12 of the IMDG 
Code, the 17th Revised Edition of the UN Model Regulations, and the 
Canadian Transportation of Dangerous Goods Regulations to include 
Amendments 8, 9, and 10. Finally, PHMSA proposed the incorporation by 
reference of new and updated standards published by the International 
Organization for Standardization (ISO) and the International 
Electrotechnical Commission (IEC). PHMSA received general support from 
the commenters on the principle of harmonizing the U.S. regulations 
with international transport and technical standards. We did not 
receive any comments that opposed our proposals to incorporate these 
standards and will adopt them in this final rule.
Chemical Under Pressure
    In the NPRM, PHMSA proposed to amend the HMT to include individual 
entries for chemical under pressure and incorporate other safety 
requirements including, but not limited to, quantity and filling limits 
and packaging and segregation requirements. PHMSA received one comment 
on this proposal from 3M in support of the proposals to add entries for 
chemical under pressure. 3M requested we authorize the use of non-
refillable cylinders larger than 1.25 liters containing flammable gas 
consistent with the UN Model Regulations. PHMSA's intent regarding the 
chemical under pressure entry was to comprehensively align the 
requirements of this entry with international standards. In this final 
rule we are revising the packaging requirements for chemical under 
pressure to authorize the use of non-refillable cylinders larger than 
1.25 liters for chemical under pressure.
Aircraft Batteries
    In the NPRM, PHMSA proposed to revise the HMR to permit the 
transport of wet cell aircraft batteries and lithium ion aircraft 
batteries aboard passenger aircraft in excess of the quantity limited 
specified in column 9A of the HMR. PHMSA received comments from Saft 
and PRBA in support of these proposed amendments because these changes 
would further harmonize the HMR with the ICAO Technical Instructions. 
Both Saft and PRBA cite a requirement in the ``FAA Modernization and 
Reform Act of 2012'' (Sec.  828, Pub. L 112-95; 126 Stat. 133 (Feb 14, 
2012)) (FAA Modernization and Reform Act of 2012) that states the 
Secretary of Transportation, including a designee of the Secretary, may 
not issue or enforce any regulation or other requirement regarding the 
transportation by aircraft of lithium metal cells or batteries or 
lithium ion cells or batteries, whether transported separately or 
packed with or contained in equipment, if the requirement is more 
stringent than the requirements of the ICAO Technical Instructions, and 
state that the NPRM proposal would be more restrictive than 
requirements in the ICAO Technical Instructions. The commenters noted 
that as proposed in the NPRM, the exception would only apply when an 
air carrier was transporting its own replacement items, whereas the 
2013-2014 ICAO Technical Instructions does not impose this restriction. 
In this final rule PHMSA has revised this exception to ensure full 
alignment with the ICAO Technical Instructions and FAA Modernization 
and Reform Act of 2012 statutory requirements.
Vessel Stowage Requirements
    In the NPRM, we proposed to revise the vessel stowage location 
requirements for explosives and reduce the number of explosive stowage 
categories from 15 to 5 in column (10A) of the HMT. IVODGA and SAAMI 
supported the proposed assignment of vessel stowage requirements for 
certain small arms cartridges consistent with the IMDG Code.
Size Requirements for ``UN'' or ``NA'' Markings
    The HMR details the general marking requirements for non-bulk 
packages in Sec.  172.301 including the proper shipping name, the 
``UN'' or ``NA'' number technical names as applicable and the consignee 
or consignor's name and address. In the NPRM, we proposed to adopt 
minimum size requirements for the ``UN'' or ``NA'' markings and provide 
a one year transition period. This action was consistent with recent 
changes adopted in the UN Model Regulations, the IMDG Code and the ICAO 
Technical Instructions.
    PHMSA received comments from the DGAC, Dow, HWI, Stericycle, and 
Veolia. DGAC and Dow requested an effective date of no earlier than 
January 1, 2017 for this requirement to allow for the depletion of 
finished products and labels and preprinted packaging stock. Veolia 
suggested the character size limit should only apply to international 
hazardous materials shipments. HWI and Stericycle note that the 
proposed

[[Page 990]]

change would impose an unnecessary economic burden since they employ 
reusable packaging permanently marked with the UN number or pre-printed 
shipping labels that may not meet proposed minimum size marking. In 
response to these comments, we will delay the effective date of this 
requirement until January 1, 2017 and permit packages permanently 
marked prior to this date to remain in use until the end of their 
useful life. This will minimize the economic impact of this requirement 
and provide a suitable period to permit the depletion of preprinted 
packages.
Flexible Bulk Containers
    In the NPRM, PHMSA proposed to adopt a new packaging definition, 
operational controls, performance-oriented standards, and testing 
requirements for Flexible Bulk Containers (FBCs). The proposed FBC 
requirements are modeled after the FBC requirements adopted into the 
17th revised edition of the UN model Regulations. IVODGA and DGAC 
support the introduction of FBCs and since we received no adverse 
comments to these proposals, we will adopt these requirements as 
proposed.
Amendments Proposed in the NPRM But Not Adopted in the Final Rule
    In this section, PHMSA discusses changes not adopted in the final 
rule as a result of comments in response to the August 15, 2012 Notice 
of Proposed Rulemaking (NPRM).
Used Medical Devices
    The UN Model Regulations have been amended to exempt medical 
devices or equipment potentially contaminated with or containing 
infectious substances which are drained of free liquids from all other 
requirements of the UN Model Regulations. In the August 15, 2012 NPRM, 
PHMSA proposed to amend Sec.  173.134, ``Class 6, Division 6.2-
Definitions and Exceptions'' to adopt additional exemptions for medical 
devices and equipment. PHMSA received one comment from COSTHA opposing 
our adoption of these changes to the HMR. COSTHA noted that the ICAO 
Dangerous Goods Panel (DGP) has reviewed and has chosen not to adopt 
the provisions for transportation by aircraft. COSTHA also noted that 
changes to the HMR before ICAO has adopted the change would lead to 
confusion and disharmony. COSTHA further noted that papers will be 
presented to both the UN and ICAO in an attempt to alter the current 
exceptions for used medical devices.
    The HMR has long standing provisions for the transport of 
potentially contaminated medical devices, some tied to provisions in 29 
CFR, concerning the domestic shipment of such goods. Pending further UN 
changes and consultation with the Centers for Disease Control, PHMSA 
will not adopt the proposed changes to Sec.  173.134 in this final 
rule.
Fuel in Machinery
    Prior to the publication of the 17th Revised Edition of the UN 
Model Regulations, the transport of large amounts of fuel in machinery 
was not specifically addressed in international transport regulations. 
In the most recent biennium of the UNSCOE, some experts expressed 
concerns about the transport of large amounts of fuel in machinery. 
This concern led the international community to adopt in the 17th 
Revised Edition of the UN Model Regulations a special provision 
associated with fuel-related Class 3 entries.
    Special Provision 363, as adopted in the UN Model Regulations, 
requires an article that contains fuel in excess of the limited 
quantity authorized amount and is ineligible to be described as 
Dangerous Goods in Machinery or Apparatus, UN3363, to conform to 
several general provisions to avoid being subject to the remainder of 
the HMR. In the August 15, 2012 NPRM, PHMSA proposed the addition of SP 
363 for transportation by vessel to various Class 3 fuels modeled on 
the corresponding special provision adopted in the UN Model 
Regulations. PHMSA received three comments (Caterpillar, DGAC, & 
IVODGA) concerning our proposed adoption of special provision 363.
    Both DGAC and Caterpillar were opposed to PHMSA's adoption of 
special provision 363. Caterpillar stated that PHMSA's proposed 
addition of special provision 363 was not based on sufficient data 
demonstrating the revision would improve transport safety. Caterpillar 
also stated that the change would introduce conflicting requirements 
and regulatory uncertainty and would be excessively burdensome. DGAC 
stated that the adoption of special provision 363 would introduce 
conflicting requirements and regulatory uncertainty, and highlighted a 
proposal they will present to the UN to clarify special provision 363.
    Caterpillar noted that the proposal in the August 15, 2012 NPRM 
does not demonstrate through data obtained via scientific methodology 
any connection between the proposed revision and enhanced reductions in 
risks to people and the environment for all affected shipments. 
Caterpillar and DGAC noted that the adoption of the changes proposed in 
the NPRM creates conflicting requirements under the HMR for shipments 
of generators and machinery.
    Caterpillar also commented that proposed special provision 363 is 
excessively burdensome and would result in millions of dollars of 
expenditures for unnecessary transport related costs that would 
ultimately raise the consumer price of affected shipments.
    IVODGA supported the adoption of special provision 363, stating 
concern that many fuel storage components within such machinery may not 
meet UN Performance Oriented Packaging or bulk tank specifications. 
IVODGA recommended PHMSA adopt special provision 363 as proposed to 
help prevent frustrated shipments at ports of discharge and loading in 
the United States.
    PHMSA will not adopt special provision 363 in this final rule. This 
decision not to adopt special provision 363 is based on several 
factors. The first was a lack of concrete safety or incident data that 
indicated a need for increased regulation of domestic shipments of 
machinery and equipment containing fuel in amounts over the authorized 
limited quantity amount for that particular fuel. Also PHMSA believes 
that to adopt this special provision would require a review of existing 
requirements for UN3166, and possibly UN3366 that has yet to take 
place. PHMSA would like to note that even though we are not adopting 
special provision 363, shippers offering hazardous materials in 
accordance with Subpart C of Part 171 may utilize the IMDG Code, 
including special provision 363, if all or part of the movement is by 
vessel. PHMSA would also like to note that a shipper utilizing the IMDG 
Code to offer cargo to a vessel for transport must still comply with 
special provision 363 under the IMDG Code. PHMSA will likely revisit 
the need to incorporate special provision 363 after a determination is 
made at the UN on pending papers concerning the implementation of this 
special provision.
Requirements for Salvage Pressure Receptacles
    The 17th Revised Edition of the UN Model Regulations adopted 
guidelines for Competent Authorities to use when issuing approvals for 
salvage pressure receptacles. These revisions are found in Chapter 1.2, 
4.1, 5.4, and 6.2 of the UN Model Regulations. Specifically, these 
requirements address the

[[Page 991]]

packaging, hazard communication, and safe transport of salvage pressure 
receptacles, also known as salvage cylinders in the United States.
    The HMR currently address the packaging, hazard communication, and 
safe transport of salvage cylinders in Sec.  173.3(d) and do not 
require approval of the Associate Administrator to do so. Accordingly, 
PHMSA did not propose adopting this provision in the August 15, 2012, 
NPRM. During the comment period, PHMSA was alerted that Chemically 
Speaking has filed a petition (P-1596) that requests PHMSA amend the 
HMR to add Class 4 and Class 5 hazardous materials to the hazard 
classes authorized in salvage cylinders. While this petition has merit, 
we did not receive it in time to address in this rulemaking. We will 
consider this petition in a future rulemaking.
Additional Clarification on the Requirements for Lithium Batteries
    On August 15, 2012, PHMSA published an NPRM associated with this 
rulemaking (RIN 2137-AE87, 77 FR 49168). In the NPRM, no specific 
amendments were proposed regarding the requirements for the air 
transportation and handling of lithium batteries. However, in that 
NPRM, PHMSA did propose the incorporation by reference of the 2013-2014 
Edition of the ICAO Technical Instructions which covers the air 
transportation of lithium batteries. This final rule adopts that 
provision and will incorporate the 2013-2014 Edition of the ICAO 
Technical Instructions by reference. Upon adoption of this provision, 
for purposes of the HMR a shipment of lithium batteries would be 
permitted to be transported by air in accordance with the 2013-2014 
Edition of the ICAO Technical Instructions (with the exception of 
primary lithium batteries and cells aboard passenger carrying aircraft 
and unapproved prototype lithium batteries and cells aboard passenger 
carrying aircraft) or the applicable requirements currently specified 
in the HMR (see Sec. Sec.  171.24(d)(1)(ii), and 171.24(d)(1)(iii)). 
Incorporation by reference of the 2013-2014 Edition of the ICAO 
Technical Instructions will allow shippers and carriers to choose which 
method of compliance is appropriate to the specific shipment. This 
Final Rule (RIN 2137-AE87; PHMSA-2012-0027) does not have any bearing 
on regulatory decisions associated with Docket HM-224F, (RIN 2137-AE44; 
PHMSA-2009-0095). PHMSA is requesting additional comment on various 
issues related to the air transportation and handling of lithium 
batteries in a separate Notice, under the Docket for that rulemaking 
(RIN AE44; PHMSA-2009-0095).

IV. Section-By-Section Review

    The following is a section-by-section review of the amendments 
adopted in this final rule:

Part 171

Section 171.7
    Section 171.7 provides a listing of all standards incorporated by 
reference into the HMR. For this rulemaking, we evaluated updated 
international consensus standards pertaining to proper shipping names, 
hazard classes, packing groups, special provisions, packaging 
authorizations, air transport quantity limitations, and vessel stowage 
requirements and determined that the revised standards provide an 
enhanced level of safety without imposing significant compliance 
burdens. These standards have a well-established and documented safety 
history; their adoption will maintain the high safety standard 
currently achieved under the HMR. Therefore, we are adding and revising 
the incorporation by reference materials under the following 
organizations:
    The International Civil Aviation Organization (ICAO) Technical 
Instructions for the Safe Transport of Dangerous Goods by Air, 2011-
2012 Edition is revised to incorporate the 2013-2014 Edition.
    The International Convention for the Safety of Life at Sea (SOLAS) 
Amendments 2002, Chapter II-2/Regulation 19, Consolidated Edition 2004 
is revised to incorporate the 2009 Consolidated Edition.
    The International Electrotechnical Commission (IEC) Fuel cell 
technologies--Part 6-1: Micro fuel cell power systems--Safety, IEC/PAS 
62282-6-1:2006(E), First Edition 2006-02, with Corrigendum 1, First 
Edition 2007-04 is removed and replaced with Fuel cell technologies--
Part 6-100: Micro fuel cell power systems--Safety, IEC 62282-6-
100:2010, Edition 1.0, March 2010 and Amendment 1 to IEC 62282-6-100, 
October 12, 2012. FCHEA requested we incorporate the recently approved 
Amendment 1 to the International Electrotechnical Commission standard 
for micro-fuel cell cartridges as well as a request for a slight 
alteration in the way we reference the document. In this final rule we 
will incorporate by reference amendment 1 to the IEC international 
standard and change the wording used to reference the document.
    The International Maritime Organization (IMO) International 
Maritime Dangerous Goods Code, 2010 Edition, Incorporating Amendment 
35-10, English Edition, Volumes 1 and 2 is revised to incorporate the 
2012 Edition, Amendment 36-12.
    The International Organization for Standardization (ISO) entries 
for ``ISO 10156:1996, Gases and Gas Mixtures--Determination of fire 
potential and oxidizing ability for the selection of cylinder valve 
outlets, Second edition, February 1996 (E)'' and ``ISO 10156-2:2005, 
Gas cylinders--Gases and gas mixtures--Part 2: Determination of 
oxidizing ability of toxic and corrosive gases and gas mixtures, First 
edition, August 2005, (E)'' are removed and replaced with an entry for 
``ISO 10156:2010: Gases and gas mixtures--Determination of fire 
potential and oxidizing ability for the selection of cylinder valve 
outlets, Third edition, March 2010.''
    The entry ``ISO 4126-1: Safety valves--Part 1: General 
requirements, December 15, 1991, First edition'' is revised to the 
entry ``ISO 4126-1:2004(E): Safety devices for protection against 
excessive pressure--Part 1: Safety valves, Second edition 2004-02-15.'' 
The entry ``ISO 11117, Gas cylinders--Valve protection caps and valve 
guards for industrial and medical gas cylinders--Design, construction 
and tests, First edition, August 1998, (E)'' is revised to the entry 
``ISO 11117:2008(E): Gas cylinders--Valve protection caps and valve 
guards--Design, construction and tests, Second edition, 2008-09-01.'' 
The entry ``ISO 11117:2008/Cor.1:2009(E): Gas cylinders--Valve 
protection caps and valve guards--Design, construction and tests, 
Technical Corrigendum 1, 2009-05-01'' is added.
    The entries ``ISO 4126-7:2004(E): Safety devices for protection 
against excessive pressure--Part 7: Common data, First Edition 2004-02-
15,'' ``ISO 4126-7:2004/Cor.1:2006(E): Safety devices for protection 
against excessive pressure--Part 7: Common data, Technical Corrigendum 
1, 2006-11-01,'' and ``ISO 13340:2001(E) Transportable gas cylinders--
Cylinder valves for non-refillable cylinders--Specification and 
prototype testing, First edition, 2004-04-01'' are added.
    The Transport Canada entry, Transportation of Dangerous Goods 
Regulations, including Clear Language Amendments 1 through 7 is revised 
to include Amendments 8, 9 and 10.
    The United Nations Recommendations on the Transport of Dangerous 
Goods--Model Regulations, 16th Revised Edition (2009), Volumes I and 
II, is revised to incorporate the 17th

[[Page 992]]

Revised Edition (2011), Volumes I and II.
    The United Nations Recommendations on the Transport of Dangerous 
Goods--Manual of Tests and Criteria, Fifth Revised Edition (2009), is 
revised to incorporate Amendment 1 (2011). One commenter (DGAC) 
requested that we do not require compliance with the lithium battery 
testing requirements contained in Amendment 1 for lithium cells and 
batteries manufactured before January 1, 2014. Since PHMSA has 
specified a delayed compliance date of January 1, 2014 for this final 
rule, compliance with Amendment 1 will only be required for lithium 
cells and batteries manufactured on or after January 1, 2014.
    In addition to the revisions and additions above, PHMSA is 
restructuring Sec.  171.7 to comply with National Archives and Records 
Administration requirements for centralized IBR section formatting. 
This change is not intended to remove or change any IBR materials 
previously incorporated by reference, with the exception of those 
references mentioned above.
Section 171.8
    This section defines terms generally used throughout the HMR that 
have broad or multi-modal applicability. PHMSA is adding the following 
defined terms:
    Aircraft battery: This term means a battery designed in accordance 
with a recognized aircraft battery design standard (e.g. FAA technical 
standard order) that is capable of meeting all aircraft airworthiness 
requirements and operating regulations.
    Currently the HMR does not define aircraft battery. The recent 
amendment of special provision A51 in the ICAO TI require PHMSA to 
define this term to ensure appropriate application of this special 
provision.
    Flexible Bulk Container (FBC): This term means a flexible container 
with a capacity not exceeding 15 cubic meters and includes liners and 
attached handling devices and service equipment.
    Currently the HMR do not prescribe requirements for the transport 
of FBCs. In this final rule, PHMSA is adopting various transportation 
and manufacturing requirements for FBCs. Prior to adoption of such 
standards, the term ``Flexible Bulk Container'' must be defined. 
Therefore we are adopting the above definition of an FBC based on the 
definition for FBC adopted in the IMDG Code and 17th Revised Edition of 
the UN Model Regulations.

Part 172

Section 172.101
    Section 172.101 provides instructions for using the Hazardous 
Materials Table (HMT) and the HMT itself. In this final rule, PHMSA is 
revising the instructional text that precedes the HMT.
    Paragraph (c) of Sec.  172.101 describes the information indicated 
in column 2 of the HMT. Column 2 lists the hazardous materials 
descriptions and proper shipping names of materials designated as 
hazardous materials. Paragraph (c)(10) of Sec.  172.101 prescribes how 
mixtures or solutions not identified specifically by name are 
described.
    PHMSA is revising Sec.  172.101(c)(10) to incorporate language 
adopted in the 17th Revised Edition of the UN Model Regulations that 
states mixtures and solutions must meet the definition of one or more 
hazard classes to be classified as a hazardous material. This change 
will clarify that for a mixture or solution composed of one or more 
components that are classified as a hazardous material, the resulting 
mixture or solution must meet the definition of one or more hazard 
classes to be classified as a hazardous material.
    Paragraph (k) of Sec.  172.101explains the purpose of column (10) 
of the HMT and prescribes the vessel stowage and segregation 
requirements for specific entries in the HMT. Column (10) is divided 
into two columns: column (10A) [Vessel stowage] specifies the 
authorized stowage locations on board cargo and passenger vessels and 
column (10B) [Other provisions] specifies special stowage and 
segregation provisions.
    We are modifying these instructions by revising the vessel stowage 
location requirements for explosives and reducing the number of 
explosive stowage categories from 15 to 5. Specifically, the explosive 
stowage categories 6 through 15 will be eliminated and stowage 
categories 1 through 5 will be modified. Changes to the explosive 
stowage categories are necessary because, as part of this final rule, 
PHMSA is removing magazine stowage Types ``A,'' ``C,'' and special 
stowage from Part 176 with the consolidation of authorized explosive 
stowage categories. The authorized explosive stowage categories will be 
replaced with a new term of art ``Closed cargo transport units for 
Class 1 (explosives).'' Included in this definition are freight 
containers or transport vehicles that are structurally serviceable in 
accordance withSec.  176.172, portable magazines conforming to Sec.  
176.137, and small vessel compartments (i.e., mast lockers and deck 
house). These changes will require Class 1 materials to be shipped in 
closed cargo transport units as defined above when stowed on deck.
Hazardous Materials Table (HMT)
    In this final rule, PHMSA is amending the HMT. Readers should 
review all changes for a complete understanding of the amendments. For 
purposes of the Government Printing Office's typesetting procedures, 
changes to the HMT appear under three sections of the Table, 
``remove,'' ``add,'' and ``revise.'' Certain entries in the HMT, such 
as those with revisions to the proper shipping names, appear as a 
``remove'' and ``add.'' Amendments to the HMT include the following:
New HMT Entries.
UN3497 Krill meal
    This new HMT entry is created because krill meal has a chemical 
composition that is significantly different from that of fish meal. It 
contains a natural stabilizing substance (ethoxyquin) and the fat 
content of krill meal is higher than that of fish meal. The UN numbers 
established for fish meal are restricted to maximum fat contents, which 
makes these UN numbers not applicable to krill meal.

UN3498 Iodine monochloride, liquid
    This new HMT entry is a result of the division of the proper 
shipping name Iodine monochloride into two authorized proper shipping 
names; one for the liquid state of the commodity and another for the 
solid state. Solid shipments of Iodine monochloride remain assigned to 
UN1792.

UN3499 Capacitor, electric double layer (with an energy storage 
capacity greater than 0.3 Wh)

    This new HMT entry covers capacitors with an energy storage 
capacity greater than 0.3 Wh. Capacitors are assigned as a Class 9 
miscellaneous hazardous material and measures required to prevent short 
circuit are provided in special provision 361.

UN3500 Chemical under pressure, n.o.s.
UN3501 Chemical under pressure, flammable, n.o.s.
UN3502 Chemical under pressure, toxic, n.o.s.
UN3503 Chemical under pressure, corrosive, n.o.s.
UN3504 Chemical under pressure, flammable, toxic, n.o.s.
UN3505 Chemical under pressure, flammable, corrosive, n.o.s.

    The ``Chemical under pressure. n.o.s.'' HMT entries are added to 
address shipments of liquids or solids (e.g.,

[[Page 993]]

adhesives, coatings, and cleaners) combined with a gas or gas mixtures 
utilized to expel the contents from pressure vessels. The primary 
hazard class for these shipments is determined by the hazard presented 
by the propellant and any subsidiary risk is determined by the 
properties of the liquid or solid under pressure. Toxic gases are not 
permitted as propellants.

UN3506 Mercury contained in manufactured articles

    This new entry was created to separately address manufactured 
articles containing mercury. The international community provided an 
exception from regulation for instruments and articles containing not 
more than 1 kg of mercury, when transported by means other than 
aircraft. PHMSA is unable to adopt a comparable exception as the 
reportable quantity for mercury is 0.454 kg (1.00 lbs.), but is 
revising the current exception authorized in Sec.  173.164(e) for 
shipments containing less than 0.454 kg (1.00 pound) to include 
transportation by vessel.

UN1950 Aerosols, corrosive, Packing Group II or III (each not exceeding 
1 L capacity).

    This new entry was inadvertently removed from the HMT due to an 
incorrect amendatory instruction in a September 13, 2011 final rule (76 
FR 56304; HM-244D). The entry is being placed back into the HMT.
Removed HMT Entries
UN3492 Toxic by inhalation liquid, corrosive, flammable, n.o.s. with an 
inhalation toxicity lower than or equal to 200 ml/m3 and saturated 
vapor concentration greater than or equal to 500 LC50
UN3493 Toxic by inhalation liquid, corrosive, flammable, n.o.s. with an 
inhalation toxicity lower than or equal to 1000 ml/m3 and saturated 
vapor concentration greater than or equal to 10 LC50

    These entries are removed from the HMT due to their similarity to 
UN3488 and UN3489 respectively. The sole difference between these 
entries is the order of subsidiary risks, which does not affect the 
classification and transport conditions applied to shipments of these 
substances. As a result, PHMSA is removing identification numbers 
UN3492 and UN3493 to avoid confusing shippers in determining which 
identification numbers to use.
Amendments to the Column (1) Symbols
    Section 172.101(b) describes column (1) of the HMT and the 
associated symbols that may be indicated in the column. In accordance 
with Sec.  172.101(b), the symbol ``G'' identifies proper shipping 
names for which one or more technical names of the hazardous material 
must be entered in parentheses in association with the basic 
description on a shipping paper. In this final rule, PHMSA is adding a 
``G'' to column (1) for ``UN1707, Thallium compounds, n.o.s.'' The 
addition of a ``G'' to this entry will provide notification of the 
technical name of this toxic material and thus aid emergency responders 
with providing an appropriate response.
Amendments to the Column (2) Hazardous Materials Descriptions and 
Proper Shipping Names
    Section 172.101(c) describes column (2) of the HMT and the 
requirements for hazardous materials descriptions and proper shipping 
names. Among other requirements, in accordance with Sec.  
172.101(c)(1), proper shipping names indicated in column (2) of the HMT 
may be used in the singular or the plural form interchangeably. 
Regardless, in this final rule, PHMSA is revising several entries in 
the HMT to remove the plural ending letter ``s'' to provide continuity 
with the internationally accepted proper shipping names. Specifically, 
PHMSA is removing the letter ``s'' from: UN1107, Amyl chlorides; 
UN1111, Amyl mercaptans; UN1113, Amyl nitrites; and, UN2347, Butyl 
Mercaptans.
    Generally the physical state (solid or liquid) appears before the 
hazard characteristics (toxic, flammable, etc.) in the sequence of 
wording used in proper shipping names specified in column (2) of the 
HMT. In some instances, the hazard characteristics are indicated before 
the physical state. In this final rule, PHMSA is revising several 
proper shipping names to indicate the physical state before the hazard 
characteristics for consistency in formatting.
    Current proper shipping names:

 
------------------------------------------------------------------------
                  UN No.                        Proper shipping name
------------------------------------------------------------------------
3276......................................  Nitriles, toxic, liquid,
                                             n.o.s.
3278......................................  Organophosphorus compound,
                                             toxic, liquid, n.o.s.
3282......................................  Organometallic compound,
                                             toxic, liquid, n.o.s.
3439......................................  Nitriles, toxic, solid,
                                             n.o.s.
3464......................................  Organophosphorus compound,
                                             toxic, solid, n.o.s.
3467......................................  Organometallic compound,
                                             toxic, solid, n.o.s.
------------------------------------------------------------------------

    Revised proper shipping names:

 
------------------------------------------------------------------------
                  UN No.                        Proper shipping name
------------------------------------------------------------------------
3276......................................  Nitriles, liquid, toxic,
                                             n.o.s.
3278......................................  Organophosphorus compound,
                                             liquid, toxic, n.o.s.
3282......................................  Oranometallic compound,
                                             liquid, toxic, n.o.s.
3439......................................  Nitriles, solid, toxic,
                                             n.o.s.
3464......................................  Organophosphorus compound,
                                             solid, toxic, n.o.s.
3467......................................  Organometallic compound,
                                             solid, toxic, n.o.s.
------------------------------------------------------------------------

    A new proper shipping name ``Cartridges for tools, blank'' is 
assigned to identification number UN0014. This proper shipping name 
more appropriately describes industrial blank cartridges currently 
described as ``UN0323, Cartridges, power device'' or ``ORM-D or ORM-D-
AIR, Cartridges, power device (used to project fastening devices).'' In 
the NPRM, PHMSA proposed to remove the ``ORM-D'' entry for 
``Cartridges, power device (used to project fastening devices)'' 
because the proper shipping name for such articles is now ``Cartridges 
for tools, blank'' under identification number UN0014. Subsequent 
changes were proposed to Sec.  173.63 and the Sec.  172.102(c)(1) 
special provision 347 to replace any references to ``ORM-D or ORM-D-
AIR, Cartridges, power device (used to project fastening devices)'' 
with the new description ``UN0014, Cartridges for tools, blank (used to 
project fastening devices).'' Additionally, such articles are not 
subject to the UN Test Series 6(d) previously required under special 
provision 347. The description ``UN0323, Cartridges, power device'' 
will remain subject to special provision 347.
    PHMSA received one comment from SAAMI noting that the proposed 
domestic only entry for Cartridges for tools, blank (used to project 
fastening devices) was unnecessary and should be deleted. SAAMI also 
asked for the retention of the ORM-D entry for Cartridges, power device 
until the end of the transition period for its use. SAAMI raised 
concerns over packaging manufactured and marked to meet current HMR 
requirements. SAAMI stated that existing packaging inventory will be 
depleted during 2013, but industry will not be ready to stop using

[[Page 994]]

the old markings for ORM-D ``Cartridges, power device'' on January 1, 
2013, and that HM-215K provided a deadline of December 31, 2013 to 
accomplish this transition. PHMSA agrees and is retaining the entry 
Cartridges power device (used to project fastening devices) and will 
not be adopting a domestic only entry for Cartridges for tools, blank.
    The proper shipping name for ``UN1305, Vinyltrichlorosilane, 
stabilized'' is amended by removing the term ``stabilized'' for 
consistency with the Dangerous Goods Lists of the various international 
standards and the HMT of the HMR. The revised proper shipping name for 
UN1305 is ``Vinyltrichlorosilane.''
    The 17th Revised Edition of the UN Model Regulations amended the 
qualifying text (text in italics) for UN Nos. 3381-3390 and UN Nos. 
3488-3491. The changes to these entries' qualifying or modifying text 
in italics would change the wording from ``with an inhalation toxicity 
lower than or equal to'' to ``with an LC50 lower than or equal to.'' 
This terminology change better identifies the criteria used to 
determine the proper classification of these substances.
Amendments to the Column (4) Identification Numbers
    Section 172.101(e) describes Column (4) of the HMT and the 
designation of the identification number to each proper shipping name. 
With the addition of a separate identification number (UN3506) for the 
description ``Mercury contained in manufactured articles,'' PHMSA is 
removing the description that is currently assigned to ``UN2809, 
Mercury.''
Amendments to the Column (6) Label(s)
    Section 172.101(g) describes Column (6) of the HMT and the labels 
required (primary and subsidiary) for specific entries in the HMT. Data 
presented to the UN Committee of Experts on the Transport of Dangerous 
Goods (UNCOE) in this last biennium indicated a need for the addition 
of subsidiary risk of Division 6.1 (toxic) to be assigned to ``UN2809, 
Mercury'' and to the new entry ``UN3506, Mercury contained in 
manufactured articles.'' We note that for air transport, Special 
provision A191 provides relief from the labeling and documentation 
requirements of this new subsidiary risk.
    In addition to the changes above, data was also presented to the 
UNCOE that indicated the need for a subsidiary risk of Division 6.1 
(toxic) to be assigned to UN2381 Dimethyl disulfide.
    PHMSA is making appropriate amendments to the HMT to account for 
these revisions to the UN Model Regulations.
Amendments to the Column (7) Special Provisions
    Section 172.101(h) describes Column (7) of the HMT and the Sec.  
172.102(c) Special provisions assigned to specific entries in the HMT. 
The particular modifications to the entries in the HMT are discussed 
below. See Section 172.102 special provisions for a detailed discussion 
of the additions, revisions, and deletions to the special provisions 
addressed in this final rule.
    Several HMT entries are revised to include special provision B120. 
Special provision B120 indicates that the material, when offered in 
conformance with the applicable requirements of Part 178 and general 
packaging requirements in Part 173, may be offered for transportation 
in a Flexible Bulk Container. See Section 172.102 special provisions 
for a detailed discussion of special provision B120.
    In this final rule, special provision B120 is assigned to the 
following entries:

------------------------------------------------------------------------
                 Proper shipping name                        UN No.
------------------------------------------------------------------------
Naphthalene, crude or Naphthalene, refined............            UN1334
Sulfur (domestic and international entries)...........            UN1350
Calcium nitrate.......................................            UN1454
Magnesium nitrate.....................................            UN1474
Potassium nitrate.....................................            UN1486
Sodium nitrate........................................            UN1498
Sodium nitrate and potassium nitrate mixtures.........            UN1499
Ammonium nitrate, with not more than 0.2% total                   UN1942
 combustible material, including any organic
 substance, calculated as carbon to the exclusion of
 any other added substance............................
Ammonium nitrate based fertilizer.....................            UN2067
Paraformaldehyde......................................            UN2213
Environmentally hazardous substance, solid, n.o.s.....            UN3077
Sodium perborate monohydrate..........................            UN3377
Sodium carbonate peroxyhydrate........................            UN3378
------------------------------------------------------------------------

    New special provision 222 is added to the ORM-D entries for 
Cartridges, small arms, and Cartridges power device (used to project 
fastening devices). See Section 172.102 Special provisions for a 
detailed discussion of the addition of special provision 222.
    The entry for UN1008 Boron trifluoride is assigned new special 
provision 238. See Section 172.102 Special provisions for a detailed 
discussion of the addition of special provision 238.
    Special provision A51 is added to authorize the transport of 
aircraft batteries consistent with the provisions of the 2013-2014 ICAO 
Technical Instructions.
    The portable tank code assigned to ``UN 1203, Gasoline'' was 
inadvertently changed from T4 to T8 in a rulemaking under Docket Number 
PHMSA-2009-0151 (HM-218F) [76 FR 43510]. As this was an inadvertent, 
but consequential change, PHMSA is amending the entry for Gasoline to 
indicate T4 as the appropriate portable tank code.
    With the addition of a Division 6.1 (toxic) subsidiary risk to 
``UN2381, Dimethyl disulfide,'' the portable tank codes and portable 
tank provisions are revised as follows:

T4 is replaced by T7
TP1 is replaced by TP2, TP13, and TP39

    See Section 172.102 Special provisions for a detailed discussion of 
our addition of special provision TP39.
    Review of the ``Guiding Principles for the Development of the UN 
Model Regulations (Guiding Principles)'' indicates that in some cases, 
the portable tank instructions for the transport of Division 4.3 liquid 
materials are not consistent with the Guiding Principles, and, in other 
instances, relevant portable tank special provisions were missing or 
incorrectly assigned. The following are revisions with deletions 
indicated by a

[[Page 995]]

strikethrough and additions or replacements shown in bold font.
[GRAPHIC] [TIFF OMITTED] TR07JA13.000

    See Section 172.102 Special provisions for a detailed discussion of 
the addition of special provision TP41.
    Special provisions A100 and A103 are revised to clarify that the 
weight (mass) limitations specified are net and not gross amounts for 
secondary lithium batteries. See Section 172.102 Special provisions for 
a detailed discussion of the revision of special provisions A100 and 
A103.
    Special provision A191 is added to note that regardless of the 
Division 6.1 (toxic) subsidiary risk indicated in the HMT, the toxic 
subsidiary risk label and an indication of the subsidiary risk on the 
shipping paper are not required for manufactured articles containing 
less than 5 kg (11 pounds) of mercury. This special provision is 
assigned to the entry ``UN3506, Mercury contained in manufactured 
articles.''
    Special provision A200 is added to require that certain articles 
may not be transported by passengers or crewmembers, on their person or 
in their baggage and are to be shipped as cargo when transported via 
aircraft. Under certain circumstances, the articles affected by this 
special provision may be excepted from the requirements of the HMR. 
When these articles are not subject to the regulations, there is the 
potential for them to be inappropriately carried aboard an aircraft. In 
response to this safety concern, the ICAO Technical Instructions were 
revised to clarify that when transported by aircraft, these articles, 
regardless of whether they are otherwise excepted from the regulations, 
must be transported as cargo and may not be carried onboard an aircraft 
by passengers or crewmembers in carry-on baggage, checked baggage, or 
on their person unless specifically excepted by Sec.  175.10, 
``Exceptions for Passengers, Crewmembers, and Air Operators.'' 
Consistent with the revised ICAO Technical Instructions requirement, 
PHMSA is adopting the special provision restricting these items from 
being carried aboard an aircraft by passengers and crewmembers.
    This special provision is assigned to the following entries: 
``UN3166, Engines, internal combustion or Engines, fuel cell, flammable 
gas powered''; ``UN3166, Engines, internal combustion or Engines, fuel 
cell, flammable liquid powered''; ``UN3166, Vehicle, flammable gas 
powered or Vehicle, fuel cell, flammable gas powered''; ``UN3166, 
Vehicle, flammable liquid powered or Vehicle, fuel cell, flammable 
liquid powered''; ``UN0503, Air bag inflators or Air bag modules or 
Seat-belt pretensioners''; and ``UN3268, Air bag inflators or Air bag 
modules or Seat-belt pretensioners.''
    Special provision W10 is assigned to ``UN3486, Calcium hypochlorite 
mixture, dry, corrosive with more than 10% but not more than 39% 
available chlorine'' and to ``UN2208, Calcium hypochlorite mixtures, 
dry, with more than 10 percent but not more than 39 percent available 
chlorine.'' Special provision W10 indicates that, when offered for 
transportation by vessel, these entries may not be offered in large 
packagings. See Section 172.102 Special provisions for a detailed 
discussion of the addition of special provision W10.
Amendments to the Column (8a) Packaging Exceptions
    Column 8A contains exceptions from some of the requirements of this 
subchapter. The referenced exceptions are in addition to those 
specified in subpart A of part 173 and elsewhere in this subchapter. A 
``None'' in this column means no packaging exceptions are authorized, 
except as may be provided by special provisions in Column 7. PHMSA 
received one comment from SAAMI noting that PHMSA, unlike the UN Model 
Regulations, IMDG Code and the European Road and Rail Regulations 
(ADR), did not propose a limited quantity exception for UN 0055 
``Cases, cartridge, empty with primer'' as a limited quantity. This was 
an inadvertent omission and PHMSA is adding 63 to column 8a of the HMT 
for the UN 0055 entry.
Amendments to the Column (9) Quantity Limitations
    Section 172.101(j) describes Column (9) of the HMT and the quantity

[[Page 996]]

limitations for specific entries in the HMT. Furthermore, Columns (9A) 
and (9B) specify the maximum quantities that may be offered for 
transportation in one package by passenger-carrying aircraft or 
passenger-carrying rail car (Column (9A)) or by cargo-only aircraft 
(Column (9B)). Unless otherwise indicated the quantity limitations 
shown in column (9) of the HMT are net. PHMSA is removing the gross 
weight indicator in columns (9A) (if authorized previously) and (9B) 
for the following battery entries. The quantity limit for these entries 
should be based on the weight of the battery or batteries and not the 
weight of the battery or batteries plus the packaging (i.e., the 
package).

UN3028 Batteries, dry, containing potassium hydroxide solid, electric, 
storage
UN2794 Batteries, wet, filled with acid, electric storage
UN2795 Batteries, wet, filled with alkali, electric storage
UN3468 Hydrogen in a metal hydride storage system or Hydrogen in a 
metal hydride storage system contained in equipment or Hydrogen in a 
metal hydride storage system packed with equipment
UN3090 Lithium battery
UN3091 Lithium batteries packed with equipment

    PHMSA is revising column (9A) to forbid several entries previously 
authorized for shipment on passenger-carrying aircraft or passenger-
carrying rail to harmonize with changes to the ICAO Technical 
Instructions. The following entries would now be forbidden on 
passenger-carrying aircraft or passenger-carrying rail.

UN1196 Ethyltrichlorosilane
UN1250 Methyltrichlorosilane
UN1298 Trimethylchlorosilane
UN1305 Vinyltrichlorosilane
UN2985 Chlorosilanes, flammable, corrosive, n.o.s.
UN3361 Chlorosilanes, toxic, corrosive, n.o.s.
UN3362 Chlorosilanes, toxic, corrosive, flammable, n.o.s.

    Quantity limits of 450 L for ``UN3334, Aviation regulated liquid, 
n.o.s.'' and 400 kg for ``UN3335, Aviation regulated solid, n.o.s.'' 
are added for both columns (9A) and (9B). Previously, there was no 
limit to the amount authorized to be shipped in one package. These new 
quantity limits are consistent with authorized quantity limits found in 
the ICAO Technical Instructions.
Amendments to the Column (10) Vessel Stowage Requirements.
Vessel Stowage Location (10A)
    Section 172.101(k) explains the purpose of column (10) of the HMT 
and prescribes the vessel stowage and segregation requirements for 
specific entries in the HMT. Column (10) is divided into two columns: 
column (10A) [Vessel stowage] specifies the authorized stowage 
locations on board cargo and passenger vessels and column (10B) [Other 
provisions] specifies special stowage and segregation provisions.
    One commenter (SAAMI) noted that limited quantity shipments are 
assigned the least restrictive stowage category and are excepted from 
additional stowage provisions in 3.4.3 of the IMDG Code and requested 
that PHMSA do the same. PHMSA agrees and is amending Sec.  172.101(k) 
to ensure that shipments offered as limited quantities are allocated to 
stowage category A, and to note that such shipments are excepted from 
the other stowage provisions indicated by codes in column 10B of the 
HMT for the material being offered for transport as a limited quantity. 
PHMSA is simplifying the number of vessel stowage locations for 
shipments of Class 1 explosive materials to harmonize with recently 
adopted vessel explosive stowage categories in the IMDG Code. 
Currently, there are 15 possible stowage location codes available for 
assignment to column (10A) for explosive shipments. Recent changes in 
the IMDG Code have reduced the number of available explosive stowage 
location codes to five. This consolidation of codes was accomplished to 
reduce the complexity of the regulations without compromising safety.
    The International Maritime Organization (IMO) determined that the 
term ``magazine'' was no longer necessary and the magazine concept 
could be incorporated into a broader definition for closed cargo 
transport units for Class 1 (explosives) material. In general, a 
magazine used to store and transport explosives is equivalent to a 
closed cargo transport unit with a wooden floor. A magazine type A has 
additional wooden walls, or walls covered with wooden pallets, and is 
currently only assigned to 7 entries in the HMT. A magazine type C is 
currently defined by a minimum distance to the ship's side of 2.4 m (8 
feet). Requirements to load Class 1 closed cargo transport units a 
minimum distance of 2.4 m (8 feet) from the ship's side wall remove the 
need for specific stowage category references to magazine stowage type 
C. The IMO, taking into account the properties of various classes and 
divisions of explosives, has determined that only 1.4S, 1.4G, 1.4D, and 
1.4C explosives are acceptable on passenger ships. PHMSA agrees and has 
removed the majority of Class 1 stowage location codes and revised the 
remaining codes. The codes for each Class 1 entry are grouped by 
stowage code (01, 02, 03, 04, or 05) as follows:
Explosive Stowage Category
01--means the material may be stowed ``on deck'' in closed cargo 
transport units or ``under deck'' on a cargo vessel (up to 12 
passengers) and on a passenger vessel
02--means the material may be stowed ``on deck'' in closed cargo 
transport units or ``under deck'' on a cargo vessel (up to 12 
passengers) and ``on deck'' in closed cargo transport units or ``under 
deck'' in closed cargo transport units on a passenger vessel
03--means the material may be stowed ``on deck'' in closed cargo 
transport units or ``under deck'' on a cargo vessel (up to 12 
passengers) but the material is prohibited on a passenger vessel
04--means the material may be stowed ``on deck'' in closed cargo 
transport units or ``under deck'' in closed cargo transports on a cargo 
vessel (up to 12 passengers) but the material is prohibited on a 
passenger vessel
05--means the material may be stowed ``on deck'' in closed cargo 
transport units on a cargo vessel (up to 12 passengers) but the 
material is prohibited on a passenger vessel

    Taking into account the properties of various classes and divisions 
of explosives, the IMO determined new stowage category assignments as 
follows:

[[Page 997]]



------------------------------------------------------------------------
                                                               Stowage
                          Division                             category
------------------------------------------------------------------------
1.1A.......................................................           05
1.1B.......................................................           05
1.2B.......................................................           05
1.4B.......................................................           05
1.1C.......................................................           04
1.2C.......................................................           04
1.3C.......................................................           04
1.4C.......................................................           02
1.1D.......................................................           04
1.2D.......................................................           04
1.4D.......................................................           02
1.5D.......................................................           03
1.1E.......................................................           04
1.2E.......................................................           04
1.4E.......................................................           03
1.1F.......................................................           05
1.2F.......................................................           05
1.3F.......................................................           05
1.4F.......................................................           05
1.1G.......................................................           03
1.2G.......................................................           03
1.3G.......................................................           03
1.4G.......................................................           02
1.2H.......................................................           05
1.3H.......................................................           05
1.1J.......................................................           05
1.2J.......................................................           05
1.3J.......................................................           05
1.2K.......................................................           05
1.3K.......................................................           05
1.1L.......................................................           05
1.2L.......................................................           05
1.3L.......................................................           05
1.6N.......................................................           03
1.4S.......................................................           01
------------------------------------------------------------------------

    PHMSA agrees with the assignments and, in particular, agrees that 
only 1.4S, 1.4G, 1.4D, and 1.4C explosives are acceptable on passenger 
ships.
    Column (10A) in the HMT is revised to read Stowage Category 01 for 
the following proper shipping names and corresponding identification 
numbers:

------------------------------------------------------------------------
    Proper shipping name        Un No.   Proper shipping name    Un No.
------------------------------------------------------------------------
Articles, explosive, n.o.s..     UN0349  Fuse, safety........     UN0105
Articles, pyrotechnic for        UN0432  Fuzes, detonating...     UN0367
 technical purposes.
Cartridges, power device....     UN0323  Fuzes, igniting.....     UN0368
Cartridges, signal..........     UN0405  Grenades, practice,      UN0110
                                          hand or rifle.
Cartridges for weapons,          UN0014  Igniters............     UN0454
 blank or Cartridges, small
 arms, blank or Cartridges
 for tools, blank.
Cartridges for weapons,          UN0012  Lighters, fuse......     UN0131
 inert projectile or
 Cartridges, small arms.
Cases, cartridge, empty with     UN0055  Primers, cap type...     UN0044
 primer.
Charges, bursting, plastics      UN0460  Primers, tubular....     UN0376
 bonded.
Charges, explosive,              UN0445  Projectiles, inert       UN0345
 commercial without                       with tracer.
 detonator.
Charges, shaped, without         UN0441  Release devices,         UN0173
 detonator.                               explosive.
Components, explosive train,     UN0384  Rivets, explosive...     UN0174
 n.o.s..
Cutters, cable, explosive...     UN0070  Signal devices, hand     UN0373
Detonator assemblies, non-       UN0500  Signals, distress,       UN0506
 electric, for blasting.                  ship.
Detonators for ammunition...     UN0366  Signals, railway         UN0193
                                          track, explosive.
Detonators, electric for         UN0456  Signals, smoke......     UN0507
 blasting.
Detonators, non-electric for     UN0455  Substances,              UN0481
 blasting.                                explosive, n.o.s..
Fireworks...................     UN0337  Toy Caps............     NA0337
Flares, aerial..............     UN0404  ....................  .........
------------------------------------------------------------------------

    Column (10A) in the HMT is revised to read Stowage Category 02 for 
the following proper shipping names and corresponding identification 
numbers:

------------------------------------------------------------------------
    Proper shipping name        UN No.   Proper shipping name    UN No.
------------------------------------------------------------------------
5-Mercaptotetrazol-1-acetic      UN0448  Flares, aerial......     UN0403
 acid.
Air bag inflators, or Air        UN0503  Fuse, igniter            UN0103
 bag modules, or Seat-belt                tubular metal clad.
 pretensioners.
Ammunition, illuminating         UN0297  Fuzes, detonating,       UN0410
 with or without burster,                 with protective
 expelling charge or                      features.
 propelling charge.
Ammunition, incendiary with      UN0300  Fuzes, igniting.....     UN0317
 or without burster,
 expelling charge or
 propelling charge.
Ammunition, practice........     UN0362  Grenades practice,       UN0452
                                          hand or rifle.
Ammunition, proof...........     UN0363  Igniters............     UN0325
Ammunition, smoke with or        UN0303  Jet perforating          NA0494
 without burster, expelling               guns, charged oil
 charge or propelling charge.             well, with
                                          detonator.
Ammunition, tear-producing       UN0301  Jet perforating          UN0494
 with burster, expelling                  guns, charged, oil
 charge or propelling charge.             well, without
                                          detonator.
Articles, explosive, n.o.s..     UN0351  Powder, smokeless...     UN0509
Articles, explosive, n.o.s..     UN0352  Primers, tubular....     UN0320
Articles, explosive, n.o.s..     UN0353  Projectiles, inert,      UN0425
                                          with tracer.
Articles, explosive, n.o.s..     UN0354  Projectiles, with        UN0347
                                          burster or
                                          expelling charge.
Articles, pyrotechnic for        UN0431  Projectiles, with        UN0435
 technical purposes.                      burster or
                                          expelling charge.
Cartridges for weapons,          UN0338  Projectiles, with        UN0344
 blank or Cartridges, small               bursting charge.
 arms, blank.
Cartridges for weapons,          UN0339  Propellant, solid...     UN0501
 inert projectile or
 Cartridges, small arms.
Cartridges, oil well........     UN0278  Rockets, line-           UN0453
                                          throwing.
Cartridges, power device....     UN0276  Rockets, with            UN0438
                                          expelling charge.
Cartridges, signal..........     UN0312  Rockets, with inert      UN0502
                                          head.
Cases, cartridges, empty         UN0379  Signal devices, hand     UN0191
 with primer.
Cases, combustible, empty,       UN0446  Signals, distress,       UN0505
 without primer.                          ship.

[[Page 998]]

 
Charges, bursting, plastics      UN0459  Signals, railway         UN0493
 bonded.                                  track, explosive.
Charges, explosive,              UN0444  Signals, smoke......     UN0197
 commercial without
 detonator.
Charges, propelling.........     UN0491  Substances,              UN0479
                                          explosive, n.o.s..
Charges, shaped, flexible,       UN0237  Substances,              UN0480
 linear.                                  explosive, n.o.s..
Charges, shaped, without         UN0440  Substances,              UN0485
 detonator.                               explosive, n.o.s..
Cord, detonating, flexible..     UN0289  Tetrazol-1-acetic        UN0407
                                          acid.
Cord, detonating, mild           UN0104  Tracers for              UN0306
 effect or Fuse, detonating,              ammunition.
 mild effect metal clad.
Cord, igniter...............     UN0066  Warheads, rocket         UN0370
                                          with burster or
                                          expelling charge.
Fireworks...................     UN0336  ....................  .........
------------------------------------------------------------------------

    Column (10A) in the HMT is revised to read Stowage Category 03 for 
the following proper shipping names and corresponding identification 
numbers:

------------------------------------------------------------------------
    Proper shipping name        UN No.   Proper shipping name    UN No.
------------------------------------------------------------------------
Ammonium nitrate-fuel oil        NA0331  Flares, aerial......     UN0421
 mixture containing only
 prilled ammonium nitrate
 and fuel oil.
Ammunition, illuminating         UN0171  Flares, surface.....     UN0092
 with or without burster,
 expelling charge or
 propelling charge.
Ammunition, illuminating         UN0254  Flares, surface.....     UN0418
 with or without burster,
 expelling charge or
 propelling charge.
Ammunition, incendiary with      UN0009  Flares, surface.....     UN0419
 or without burster,
 expelling charge, or
 propelling charge.
Ammunition, incendiary with      UN0010  Flash powder........     UN0094
 or without burster,
 expelling charge, or
 propelling charge.
Ammunition, practice........     UN0488  Flash powder........     UN0305
Ammunition, smoke with or        UN0015  Fuse, non-detonating     UN0101
 without burster, expelling               instantaneous or
 charge or propelling charge.             quickmatch.
Ammunition, smoke with or        UN0016  Fuzes, igniting.....     UN0316
 without burster, expelling
 charge or propelling charge.
Ammunition, tear-producing       UN0018  Grenades, practice,      UN0318
 with burster, expelling                  hand or rifle.
 charge or propelling charge.
Ammunition, tear-producing       UN0019  Grenades, practice,      UN0372
 with burster, expelling                  hand or rifle.
 charge or propelling charge.
Articles, explosive,             UN0486  Igniters............     UN0121
 extremely insensitive or
 Articles, EEI.
Articles, explosive, n.o.s..     UN0471  Igniters............     UN0314
Articles, pyrotechnic for        UN0428  Igniters............     UN0315
 technical purposes.
Articles, pyrotechnic for        UN0429  Primers, tubular....     UN0319
 technical purposes.
Articles, pyrotechnic for        UN0430  Projectiles, inert,      UN0424
 technical purposes.                      with tracer.
Bombs, photo-flash..........     UN0039  Projectiles, with        UN0434
                                          burster or
                                          expelling charge.
Bombs, photo-flash..........     UN0299  Rockets, line-           UN0238
                                          throwing.
Cartridges for weapons, with     UN0412  Rockets, line-           UN0240
 bursting charge.                         throwing.
Cartridges, flash...........     UN0049  Signals, distress,       UN0194
                                          ship.
Cartridges, flash...........     UN0050  Signals, distress,       UN0195
                                          ship.
Cartridges, signal..........     UN0054  Signals, railway         UN0192
                                          track, explosive.
Explosive, blasting, type B      UN0331  Signals, railway         UN0492
 or Agent blasting, Type B.               track, explosive.
Explosive, blasting, type E      UN0332  Signals, smoke......     UN0196
 or Agent blasting, Type E.
Fireworks...................     UN0333  Signals, smoke......     UN0313
Fireworks...................     UN0334  Signals, smoke......     UN0487
Fireworks...................     UN0335  Substances,              UN0476
                                          explosive, n.o.s..
Flares, aerial..............     UN0093  Substances,              UN0478
                                          explosive, n.o.s..
Flares, aerial..............     UN0420  Substances,              UN0482
                                          explosive, very
                                          insensitive, n.o.s.
                                          or Substances, EVI,
                                          n.o.s..
                              .........  Tracers for              UN0212
                                          ammunition.
------------------------------------------------------------------------

    Column (10A) in the HMT is revised to read Stowage Category 04 for 
the following proper shipping names and corresponding identification 
numbers:

------------------------------------------------------------------------
    Proper shipping name        UN No.   Proper shipping name    UN No.
------------------------------------------------------------------------
1H-Tetrazole................     UN0504  Hexolite, or Hexotol     UN0118
                                          dry or wetted with
                                          less than 15
                                          percent water, by
                                          mass.
1-Hydroxybenzotriazole,          UN0508  Hexotonal...........     UN0393
 anhydrous, dry or wetted
 with less than 20 percent
 water, by mass.
5-Nitrobenzotriazol.........     UN0385  Jet perforating          NA0124
                                          guns, charged oil
                                          well, with
                                          detonator.

[[Page 999]]

 
Ammonium nitrate, with more      UN0222  Jet perforating          UN0124
 than 0.2 percent                         guns, charged oil
 combustible substances,                  well, without
 including any organic                    detonator.
 substance calculated as
 carbon, to the exclusion of
 any other added substance.
Ammonium perchlorate........     UN0402  Mannitol                 UN0133
                                          hexanitrate, wetted
                                          or Nitromannite,
                                          wetted with not
                                          less than 40
                                          percent water, or
                                          mixture of alcohol
                                          and water, by mass.
Ammonium picrate, dry or         UN0004  Mines with bursting      UN0137
 wetted with less than 10                 charge.
 percent water, by mass.
Articles, explosive, n.o.s..     UN0462  Mines with bursting      UN0138
                                          charge.
Articles, explosive, n.o.s..     UN0463  Nitro urea..........     UN0147
Articles, explosive, n.o.s..     UN0464  Nitrocellulose, dry      UN0340
                                          or wetted with less
                                          than 25 percent
                                          water (or alcohol),
                                          by mass.
Articles, explosive, n.o.s..     UN0466  Nitrocellulose,          UN0343
                                          plasticized with
                                          not less than 18
                                          percent
                                          plasticizing
                                          substance, by mass.
Articles, explosive, n.o.s..     UN0467  Nitrocellulose,          UN0341
                                          unmodified or
                                          plasticized with
                                          less than 18
                                          percent
                                          plasticizing
                                          substance, by mass.
Articles, explosive, n.o.s..     UN0468  Nitrocellulose,          UN0342
                                          wetted with not
                                          less than 25
                                          percent alcohol, by
                                          mass.
Articles, explosive, n.o.s..     UN0470  Nitroglycerin,           UN0143
                                          desensitized with
                                          not less than 40
                                          percent non-
                                          volatile water
                                          insoluble
                                          phlegmatizer, by
                                          mass.
Black powder or Gunpowder,       UN0027  Nitroglycerin,           UN0144
 granular or as a meal.                   solution in
                                          alcohol, with more
                                          than 1 percent but
                                          not more than 10
                                          percent
                                          nitrogylcerin.
Black powder, compressed or      UN0028  Nitroguanidine or        UN0282
 Gunpowder, compressed or                 Picrite, dry or
 Black powder, in pellets or              wetted with less
 Gunpowder, in pellets.                   than 20 percent
                                          water, by mass.
                              .........  Nitrostarch, dry or      UN0146
                                          wetted with less
                                          than 20 percent
                                          water, by mass.
Bombs, photo-flash..........     UN0038  Nitrotriazolone or       UN0490
                                          NTO.
Bombs, with bursting charge.     UN0034  Octolite or Octol,       UN0266
                                          dry or wetted with
                                          less than 15
                                          percent water, by
                                          mass.
Bombs, with bursting charge.     UN0035  Octonal.............     UN0496
Boosters, without detonator.     UN0042  Pentaerythrite           UN0411
                                          tetranitrate or
                                          Pentaerythritol
                                          tetranitrate or
                                          PETN, with not less
                                          than 7 percent wax
                                          by mass.
Boosters, without detonator.     UN0283  Pentaerythrite           UN0150
                                          tetranitrate,
                                          wetted or
                                          Pentaerythritol
                                          tetranitrate,
                                          wetted, or PETN,
                                          wetted with not
                                          less than 25
                                          percent water, by
                                          mass, or
                                          Pentaerythrite
                                          tetranitrate, or
                                          Pentaerythritol
                                          tetranitrate or
                                          PETN, desensitized
                                          with not less than
                                          15 percent
                                          phlegmatizer by
                                          mass.
Bursters, explosive.........     UN0043  Pentolite, dry or        UN0151
                                          wetted with less
                                          than 15 percent
                                          water, by mass.
Cartridges for weapons,          UN0326  Powder cake, wetted      UN0433
 blank.                                   or Powder paste,
                                          wetted with not
                                          less than 17
                                          percent alcohol by
                                          mass.
Cartridges for weapons,          UN0413  Powder cake, wetted      UN0159
 blank.                                   or Powder paste,
                                          wetted with not
                                          less than 25
                                          percent water, by
                                          mass.
Cartridges for weapons,          UN0327  Powder, smokeless...     UN0160
 blank or Cartridges, small
 arms, blank.
Cartridges for weapons,          UN0328  Powder, smokeless...     UN0161
 inert projectile.
Cartridges for weapons,          UN0417  Projectiles, with        UN0346
 inert projectile or                      burster or
 Cartridges, small arms.                  expelling charge.
Cartridges for weapons, with     UN0006  Projectiles, with        UN0168
 bursting charge.                         bursting charge.
Cartridges for weapons, with     UN0321  Projectiles, with        UN0169
 bursting charge.                         bursting charge.
Cartridges, oil well........     UN0277  Propellant, liquid..     UN0495
Cartridges, power device....     UN0275  Propellant, liquid..     UN0497
Cartridges, power device....     UN0381  Propellant, solid...     UN0498
Cases, combustible, empty,       UN0447  Propellant, solid...     UN0499
 without primer.
Charges, bursting, plastics      UN0457  RDX and HMX              UN0391
 bonded.                                  mixtures, wetted
                                          with not less than
                                          15 percent water by
                                          mass or RDX and HMX
                                          mixtures,
                                          desensitized with
                                          not less than 10
                                          percent
                                          phlegmatizer by
                                          mass.
Charges, bursting, plastics      UN0458  Rocket motors.......     UN0186
 bonded.
Charges, demolition.........     UN0048  Rocket motors.......     UN0280
Charges, depth..............     UN0056  Rocket motors.......     UN0281
Charges, explosive,              UN0442  Rockets, with            UN0181
 commercial without                       bursting charge.
 detonator.
Charges, explosive,              UN0443  Rockets, with            UN0182
 commercial without                       bursting charge.
 detonator.
Charges, propelling.........     UN0271  Rockets, with            UN0436
                                          expelling charge.
Charges, propelling.........     UN0272  Rockets, with            UN0437
                                          expelling charge.
Charges, propelling.........     UN0415  Rockets, with inert      UN0183
                                          head.
Charges, propelling, for         UN0242  Sodium dinitro-o-        UN0234
 cannon.                                  cresolate, dry or
                                          wetted with less
                                          than 15 percent
                                          water, by mass.
Charges, propelling, for         UN0279  Sodium picramate,        UN0235
 cannon.                                  dry or wetted with
                                          less than 20
                                          percent water, by
                                          mass.
Charges, propelling, for         UN0414  Sounding devices,        UN0374
 cannon.                                  explosive.
Charges, shaped, flexible,       UN0288  Sounding devices,        UN0375
 linear.                                  explosive.

[[Page 1000]]

 
Charges, shaped, without         UN0059  Substances,              UN0474
 detonator.                               explosive, n.o.s..
Charges, shaped, without         UN0439  Substances,              UN0475
 detonator.                               explosive, n.o.s..
Charges, supplementary           UN0060  Substances,              UN0477
 explosive.                               explosive, n.o.s..
Cord detonating or Fuse          UN0102  Tetranitroaniline...     UN0207
 detonating metal clad.
Cord, detonating or Fuse,        UN0290  Torpedoes with           UN0329
 detonating metal clad.                   bursting charge.
Cord, detonating, flexible..     UN0065  Torpedoes with           UN0451
                                          bursting charge.
Cyclotetramethylenetetranitr     UN0484  Trinitroaniline or       UN0153
 amine, desensitized or                   Picramide.
 Octogen, desensitized or
 HMX, desensitized.
Cyclotetramethylenetetranitr     UN0226  Trinitroanisole.....     UN0213
 amine, wetted or HMX,
 wetted or Octogen, wetted
 with not less than 15
 percent water, by mass.
Cyclotrimethylenetrinitramin     UN0483  Trinitrobenzene, dry     UN0214
 e, desensitized or                       or wetted with less
 Cyclonite, desensitized or               than 30 percent
 Hexogen, desensitized or                 water, by mass.
 RDX, desensitized.
Cyclotrimethylenetrinitramin     UN0072  Trinitrobenzenesulfo     UN0386
 e, wetted or Cyclonite,                  nic acid.
 wetted or Hexogen, wetted
 or RDX, wetted with not
 less than 15 percent water
 by mass.
Deflagrating metal salts of      UN0132  Trinitrobenzoic          UN0215
 aromatic nitroderivatives,               acid, dry or wetted
 n.o.s..                                  with less than 30
                                          percent water, by
                                          mass.
Diethyleneglycol dinitrate,      UN0075  Trinitrochlorobenzen     UN0155
 desensitized with not less               e or Picryl
 than 25 percent non-                     chloride.
 volatile water-insoluble
 phlegmatizer, by mass.
Dinitroglycoluril or Dingu..     UN0489  Trinitrofluorenone..     UN0387
Dinitrophenol, dry or wetted     UN0076  Trinitro-m-cresol...     UN0216
 with less than 15 percent
 water, by mass.
Dinitrophenolates alkali         UN0077  Trinitronaphthalene.     UN0217
 metals, dry or wetted with
 less than 15 percent water,
 by mass.
Dinitroresorcinol, dry or        UN0078  Trinitrophenetole...     UN0218
 wetted with less than 15
 percent water, by mass.
Dinitrosobenzene............     UN0406  Trinitrophenol or        UN0154
                                          Picric acid, dry or
                                          wetted with less
                                          than 30 percent
                                          water, by mass.
Dipicryl sulfide, dry or         UN0401  Trinitrophenylmethyl     UN0208
 wetted with less than 10                 nitramine or Tetryl.
 percent water, by mass.
Explosive, blasting, type A.     UN0081  Trinitroresorcinol       UN0219
                                          or Styphnic acid,
                                          dry or wetted with
                                          less than 20
                                          percent water, or
                                          mixture of alcohol
                                          and water, by mass.
Explosive, blasting, type B.     UN0082  Trinitroresorcinol,      UN0394
                                          wetted or Styphnic
                                          acid, wetted with
                                          not less than 20
                                          percent water, or
                                          mixture of alcohol
                                          and water by mass.
Explosive, blasting, type C.     UN0083  Trinitrotoluene and      UN0388
                                          Trinitrobenzene
                                          mixtures or TNT and
                                          trinitrobenzene
                                          mixtures or TNT and
                                          hexanitrostilbene
                                          mixtures or
                                          Trinitrotoluene and
                                          hexanitrostilnene
                                          mixtures.
Explosive, blasting, type D.     UN0084  Trinitrotoluene          UN0389
                                          mixtures containing
                                          Trinitrobenzene and
                                          Hexanitrostilbene
                                          or TNT mixtures
                                          containing
                                          trinitrobenzene and
                                          hexanitrostilbene.
Explosive, blasting, type E.     UN0241  Trinitrotoluene or       UN0209
                                          TNT, dry or wetted
                                          with less than 30
                                          percent water, by
                                          mass.
Fracturing devices,              UN0099  Tritonal............     UN0390
 explosive, without
 detonators for oil wells.
Fuzes, detonating, with          UN0408  Urea nitrate, dry or     UN0220
 protective features.                     wetted with less
                                          than 20 percent
                                          water, by mass.
Fuzes, detonating, with          UN0409  Warheads, rocket         UN0286
 protective features.                     with bursting
                                          charge.
Grenades, hand or rifle,         UN0284  Warheads, rocket         UN0287
 with bursting charge.                    with bursting
                                          charge.
Grenades, hand or rifle,         UN0285  Warheads, torpedo        UN0221
 with bursting charge.                    with bursting
                                          charge.
Hexanitrodiphenylamine or        UN0079  Zirconium picramate,     UN0236
 Dipicrylamine or Hexyl.                  dry or wetted with
                                          less than 20
                                          percent water, by
                                          mass.
Hexanitrostilbene...........     UN0392
------------------------------------------------------------------------

    Column (10A) in the HMT is revised to read Stowage Category 05 for 
the following proper shipping names and corresponding identification 
numbers:

------------------------------------------------------------------------
    Proper shipping name        UN No.   Proper shipping name    UN No.
------------------------------------------------------------------------
Ammunition smoke, white          UN0245  Diazodinitrophenol,      UN0074
 phosphorus with burster,                 wetted with not
 expelling charge, or                     less than 40
 propelling charge.                       percent water or
                                          mixture of alcohol
                                          and water, by mass.
Ammunition, incendiary           UN0247  Fuzes, detonating...     UN0106
 liquid or gel, with
 burster, expelling charge
 or propelling charge.
Ammunition, incendiary,          UN0243  Fuzes, detonating...     UN0107
 white phosphorus, with
 burster, expelling charge
 or propelling charge.

[[Page 1001]]

 
Ammunition, incendiary,          UN0244  Fuzes, detonating...     UN0257
 white phosphorus, with
 burster, expelling charge
 or propelling charge.
Ammunition, smoke, white         UN0246  Grenades, hand or        UN0292
 phosphorus with burster,                 rifle, with
 expelling charge, or                     bursting charge.
 propelling charge.
Ammunition, toxic with           UN0020  Grenades, hand or        UN0293
 burster, expelling charge,               rifle, with
 or propelling charge.                    bursting charge.
Ammunition, toxic with           UN0021  Guanyl                   UN0113
 burster, expelling charge,               nitrosaminoguanylid
 or propelling charge.                    ene hydrazine,
                                          wetted with not
                                          less than 30
                                          percent water, by
                                          mass.
Articles, explosive, n.o.s..     UN0350  Guanyl                   UN0114
                                          nitrosaminoguanylte
                                          trazene, wetted or
                                          Tetrazene, wetted
                                          with not less than
                                          30 percent water or
                                          mixture of alcohol
                                          and water, by mass.
Articles, explosive, n.o.s..     UN0355  Lead azide, wetted       UN0129
                                          with not less than
                                          20 percent water or
                                          mixture of alcohol
                                          and water, by mass.
Articles, explosive, n.o.s..     UN0356  Lead styphnate,          UN0130
                                          wetted or Lead
                                          trinitroresorcinate
                                          , wetted with not
                                          less than 20
                                          percent water or
                                          mixture of alcohol
                                          and water, by mass.
Articles, explosive, n.o.s..     UN0465  Mercury fulminate,       UN0135
                                          wetted with not
                                          less than 20
                                          percent water, or
                                          mixture of alcohol
                                          and water, by mass.
Articles, explosive, n.o.s..     UN0469  Mines with bursting      UN0136
                                          charge.
Articles, explosive, n.o.s..     UN0472  Mines with bursting      UN0294
                                          charge.
Articles, pyrophoric........     UN0380  Primers, cap type...     UN0377
Barium azide, dry or wetted      UN0224  Primers, cap type...     UN0378
 with less than 50 percent
 water, by mass.
Bombs with flammable liquid,     UN0399  Projectiles, with        UN0426
 with bursting charge.                    burster or
                                          expelling charge.
Bombs with flammable liquid,     UN0400  Projectiles, with        UN0427
 with bursting charge.                    burster or
                                          expelling charge.
Bombs, photo-flash..........     UN0037  Projectiles, with        UN0167
                                          bursting charge.
Bombs, with bursting charge.     UN0033  Projectiles, with        UN0324
                                          bursting charge.
Bombs, with bursting charge.     UN0291  Rocket motors with       UN0250
                                          hypergolic liquids
                                          with or without an
                                          expelling charge.
Boosters with detonator.....     UN0225  Rocket motors with       UN0322
                                          hypergolic liquids
                                          with or without an
                                          expelling charge.
Boosters with detonator.....     UN0268  Rocket motors,           UN0395
                                          liquid fueled.
Cartridges for weapons, with     UN0005  Rocket motors,           UN0396
 bursting charge.                         liquid fueled.
Cartridges for weapons, with     UN0007  Rockets, liquid          UN0397
 bursting charge.                         fueled with
                                          bursting charge.
Cartridges for weapons, with     UN0348  Rockets, liquid          UN0398
 bursting charge.                         fueled with
                                          bursting charge.
Components, explosive train,     UN0382  Rockets, with            UN0180
 n.o.s..                                  bursting charge.
Components, explosive train,     UN0383  Rockets, with            UN0295
 n.o.s..                                  bursting charge.
Components, explosive train,     UN0461  Samples, explosive,      UN0190
 n.o.s..                                  other than
                                          initiating
                                          explosives.
Contrivances, water-             UN0248  Sounding devices,        UN0204
 activated, with burster,                 explosive.
 expelling charge or
 propelling charge.
Contrivances, water-             UN0249  Sounding devices,        UN0296
 activated, with burster,                 explosive.
 expelling charge or
 propelling charge.
Detonator assemblies, non-       UN0360  Substances,              UN0357
 electric for blasting.                   explosive, n.o.s..
Detonator assemblies, non-       UN0361  Substances,              UN0358
 electric, for blasting.                  explosive, n.o.s..
Detonators for ammunition...     UN0073  Substances,              UN0359
                                          explosive, n.o.s..
Detonators for ammunition...     UN0364  Substances,              UN0473
                                          explosive, n.o.s..
Detonators for ammunition...     UN0365  Torpedoes with           UN0330
                                          bursting charge.
Detonators, electric, for        UN0030  Torpedoes, liquid        UN0450
 blasting.                                fueled, with inert
                                          head.
Detonators, electric, for        UN0255  Torpedoes, liquid        UN0449
 blasting.                                fueled, with or
                                          without bursting
                                          charge.
Detonators, non-electric,        UN0029  Warheads, rocket         UN0371
 for blasting.                            with burster or
                                          expelling charge.
Detonators, non-electric,        UN0267  Warheads, rocket         UN0369
 for blasting.                            with bursting
                                          charge.
------------------------------------------------------------------------

Vessel Stowage Codes (10B)
    Section 172.101(k) describes Column (10) of the HMT and the vessel 
stowage requirements for specific entries in the HMT. Furthermore, 
column (10B) [Other provisions] specifies codes for stowage 
requirements for specific hazardous materials. The meaning of each code 
in Column (10B) is set forth in Sec.  176.84 of this subchapter.
    Vessel shipments of Class 1 explosives are currently required to be 
stored away from all sources of heat including steam pipes, heating 
coils, sparks, and flame in accordance with Sec.  176.116(a). In 
addition to this general provision in Sec.  176.116, several vessel 
stowage codes in column (10B) make reference to shading or stowing away 
from heat. To harmonize with the IMDG Code, reduce the number of 
redundant vessel stowage codes, and incorporate the addition of a new 
definition for protected from sources of heat (see Section 176.2 of 
this final rule for definition) PHMSA is deleting vessel stowage codes 
50 and 48 and replacing all references to these codes with stowage code 
25. See Section 176.84 for a detailed discussion of our revision to 
stowage code 25.
    The following proper shipping names and corresponding 
identification numbers will have stowage code 48 replaced with stowage 
code 25 in Column (10B) in the HMT. If the commodity is currently 
assigned both stowage code 48 and 25 in Column (10B) in the HMT stowage 
code 48 will be deleted and stowage code 25 will remain.

[[Page 1002]]



------------------------------------------------------------------------
    Proper shipping name        UN No.   Proper shipping name    UN No.
------------------------------------------------------------------------
Aerosols, poison, Packing     .........  Calcium hypochlorite     UN3486
 Group III (each not                      mixture, dry,
 exceeding 1 L capacity).                 corrosive with more
                                          than 10% but not
                                          more than 39%
                                          available chlorine.
Aerosols, poison, Packing        UN1950  Calcium hypochlorite     UN2208
 Group III (each not                      mixtures, dry, with
 exceeding 1 L capacity).                 more than 10
                                          percent but not
                                          more than 39
                                          percent available
                                          chlorine.
Aerosols, flammable, (each       UN1950  Copra...............     UN1363
 not exceeding 1 L capacity).
Aerosols, flammable, n.o.s.      UN1950  Dichlorophenyl           UN2250
 (engine starting fluid)                  isocyanates.
 (each not exceeding 1 L
 capacity).
Aerosols, non-flammable,         UN1950  Dicyclohexylammonium     UN2687
 (each not exceeding 1 L                  nitrite.
 capacity).
Aerosols, poison, (each not      UN1950  Gallium.............     UN2803
 exceeding 1 L capacity).
Ammonium nitrate based           UN2067  Hypochlorites,           UN3212
 fertilizer.                              inorganic, n.o.s.
Ammonium nitrate emulsion or     UN3375  Isocyanates, toxic,      UN3080
 Ammonium nitrate suspension              flammable, n.o.s.
 or Ammonium nitrate gel,                 or Isocyanate
 intermediate for blasting                solutions, toxic,
 explosives.                              flammable, n.o.s.,
                                          flash point not
                                          less than 23
                                          degrees C but not
                                          more than 61
                                          degrees C and
                                          boiling point less
                                          than 300 degrees C.
Ammonium nitrate, with not       UN1942  Isocyanates, toxic,      UN2206
 more than 0.2% total                     n.o.s. or
 combustible material,                    Isocyanate
 including any organic                    solutions, toxic,
 substance, calculated as                 n.o.s., flash point
 carbon to the exclusion of               more than 61
 any other added substance.               degrees C and
                                          boiling point less
                                          than 300 degrees C.
Batteries, nickel-metal          UN3496  Isocyanatobenzotrifl     UN2285
 hydride see Batteries, dry,              uorides.
 sealed, n.o.s. for nickel-
 metal hydride batteries
 transported by modes other
 than vessel.
Benzyldimethylamine.........     UN2619  Lithium                  UN1471
                                          hypochlorite, dry
                                          or Lithium
                                          hypochlorite
                                          mixture.
5-tert-Butyl-2,4,6-trinitro-     UN2956  Methacrylonitrile,       UN3079
 m-xylene or Musk xylene.                 stabilized.
Calcium hypochlorite, dry,       UN3485  Phosphorous acid....     UN2834
 corrosive or Calcium
 hypochlorite mixtures, dry,
 corrosive with more than
 39% available chlorine
 (8.8% available oxygen).
Calcium hypochlorite, dry or     UN1748  Propylene                UN2611
 Calcium hypochlorite                     chlorohydrins.
 mixtures dry with more than
 39 percent available
 chlorine (8.8 percent
 available oxygen).
Calcium hypochlorite,            UN3487  Sodium carbonate         UN3378
 hydrated, corrosive or                   peroxyhydrate.
 Calcium hypochlorite,
 hydrated mixture, corrosive
 with not less than 5.5% but
 not more than 16% water.
Calcium hypochlorite,            UN2880  Sodium perborate         UN3377
 hydrated or Calcium                      monohydrate.
 hypochlorite, hydrated
 mixtures, with not less
 than 5.5 percent but not
 more than 16 percent water.
------------------------------------------------------------------------

    The following proper shipping names and corresponding 
identification numbers will have stowage code 19 replaced with stowage 
code 25 in Column (10B) in the HMT if stowage code 25 is not currently 
listed in Column (10B). If the proper shipping name already is 
currently assigned both stowage code 19 and 25, stowage code 19 will be 
deleted.

------------------------------------------------------------------------
    Proper shipping name        UN No.   Proper shipping name    UN No.
------------------------------------------------------------------------
Copra.......................     UN1363  Plastic molding          UN3314
                                          compound in dough,
                                          sheet or extruded
                                          rope form evolving
                                          flammable vapor.
Polymeric beads, expandable      UN2211  Sulfur..............     NA1350
 evolving flammable vapor.
Sulfur......................     UN1350
------------------------------------------------------------------------

    We are also assigning stowage code 25 to every Class 1 explosive 
table entry to indicate these materials must be protected from sources 
of heat in accordance with the new definition of ``protected from 
sources of heat'' in Sec.  176.2. See Section 176.84 for a detailed 
discussion of our revision to stowage code 25 and Sec.  176.2 for the 
definition of ``protected from sources of heat.''
    Stowage code 50 is currently not assigned to any HMT entries and is 
being deleted.
    PHMSA is revising stowage code 128 to account for a citation change 
in the IMDG Code. The new text of stowage code 128 is ``stow in 
accordance with the IMDG Code, Sub-section 7.6.2.7.2 (incorporated by 
reference; see Sec.  171.7 of this subchapter).''
    PHMSA is deleting stowage codes 7E, 8E, and 20E. The reduction in 
the number of vessel stowage categories in column (10A) makes these 
codes unnecessary and any applicable stowage requirements are covered 
by the requirements of the applied code in column (10A).
    The following proper shipping names and corresponding 
identification numbers will have stowage code 7E removed from column 
(10B) of the HMT.

------------------------------------------------------------------------
    Proper shipping name        UN No.   Proper shipping name    UN No.
------------------------------------------------------------------------
Ammunition, smoke with or        UN0303  Ammunition, tear-        UN0301
 without burster, expelling               producing with
 charge or propelling charge.             burster, expelling
                                          charge or
                                          propelling charge.
------------------------------------------------------------------------


[[Page 1003]]

    The following proper shipping names and corresponding 
identification numbers will have stowage code 8E removed from column 
(10B) of the HMT.

------------------------------------------------------------------------
    Proper shipping name        UN No.   Proper shipping name    UN No.
------------------------------------------------------------------------
Ammunition smoke, white          UN0245  Articles, explosive,     UN0354
 phosphorus with burster,                 n.o.s..
 expelling charge, or
 propelling charge.
Ammunition, smoke, white         UN0246  Articles, explosive,     UN0355
 phosphorus with burster,                 n.o.s..
 expelling charge, or
 propelling charge.
Ammunition, smoke with or        UN0015  Articles, explosive,     UN0356
 without burster, expelling               n.o.s..
 charge or propelling charge.
Ammunition, smoke with or        UN0016  Articles, pyrophoric     UN0380
 without burster, expelling
 charge or propelling charge.
Ammunition, smoke with or        UN0303  Contrivances, water-     UN0248
 without burster, expelling               activated, with
 charge or propelling charge.             burster, expelling
                                          charge or
                                          propelling charge.
Ammunition, tear-producing       UN0018  Contrivances, water-     UN0249
 with burster, expelling                  activated, with
 charge or propelling charge.             burster, expelling
                                          charge or
                                          propelling charge.
Ammunition, tear-producing       UN0019  Rocket motors with       UN0250
 with burster, expelling                  hypergolic liquids
 charge or propelling charge.             with or without an
                                          expelling charge.
Ammunition, tear-producing       UN0301  Rocket motors with       UN0322
 with burster, expelling                  hypergolic liquids
 charge or propelling charge.             with or without an
                                          expelling charge.
Ammunition, toxic with           UN0020  Substances,              UN0357
 burster, expelling charge,               explosive, n.o.s..
 or propelling charge.
Ammunition, toxic with           UN0021  Substances,              UN0358
 burster, expelling charge,               explosive, n.o.s..
 or propelling charge.
                                         Substances,              UN0359
                                          explosive, n.o.s..
------------------------------------------------------------------------

    The following proper shipping names and corresponding 
identification numbers will have stowage code 20E removed from column 
(10B) of the HMT.

------------------------------------------------------------------------
    Proper shipping name        UN No.   Proper shipping name    UN No.
------------------------------------------------------------------------
Ammunition, smoke with or        UN0015  Ammunition, tear-        UN0018
 without burster, expelling               producing with
 charge or propelling charge.             burster, expelling
                                          charge or
                                          propelling charge.
Ammunition, smoke with or        UN0016  Ammunition, tear-        UN0019
 without burster, expelling               producing with
 charge or propelling charge.             burster, expelling
                                          charge or
                                          propelling charge.
------------------------------------------------------------------------

    During review of the explosive stowage codes it was noted that 
stowage code 1E was assigned to UN0504 1H-Tetrazole and UN0502 Rockets, 
with inert head. Stowage code 1E was removed in a final rule published 
on June 21 2001, under Docket Number RSPA-2000-7702 (HM-215D) [66 FR 
33316] entitled, ``Harmonization with the United Nations 
Recommendations, International Maritime Dangerous Goods Code, and 
International Civil Aviation Organization's Technical Instructions'' 
and, in this final rule, PHMSA is amending the listings for these two 
entries by removing these two codes whose requirements have been 
captured by other vessel stowage provisions.
Section 172.102 Special Provisions
    Section 172.102 lists special provisions applicable to the 
transportation of specific hazardous materials. Special provisions 
contain packaging requirements, prohibitions, and exceptions applicable 
to particular quantities or forms of hazardous materials. PHMSA is 
revising Sec.  172.102, Special provisions as follows:
Special Provision 47
    Special provision 47 provides classification exceptions for 
mixtures of solids and flammable liquids. In this final rule, PHMSA is 
revising special provision 47 to clarify that the requirement that each 
packaging must correspond with a design type that has passed a 
leakproofness test at the Packing Group II level applies only to single 
packagings.
Special Provision 48
    Special provision 48 provides classification exceptions for 
mixtures of solids and toxic liquids. In this final rule, PHMSA is 
revising special provision 48 to clarify that the requirement that each 
packaging must correspond with a design type that has passed a 
leakproofness test at the Packing Group II level applies only to single 
packagings.
Special Provision 49
    Special provision 49 provides classification exceptions for 
mixtures of solids and corrosive liquids. In this final rule, PHMSA is 
revising special provision 49 to clarify that the requirement that each 
packaging must correspond with a design type that has passed a 
leakproofness test at the Packing Group II level applies only to single 
packagings.
Special Provision 101
    In a NPRM published in the Federal Register on August 31, 2006 (71 
FR 51895), we proposed to remove Sec.  172.102(c)(1), Special provision 
101. In the NPRM, we stated that with the introduction of the letter 
''G'' in Column (1), which requires the n.o.s. and generic proper 
shipping names to be supplemented with the technical name of the 
hazardous material, special provision 101 became obsolete. 
Consequently, because we did not receive public comment, the amendment 
was adopted as proposed in a final rule published in the Federal 
Register on December 29, 2006 (71 FR 78596).
    Consequences of the removal of Sec.  172.102(c)(1) Special 
provision 101 in 2006 may have resulted in noncompliance for certain 
Department of Defense (DOD) explosive shipments.

[[Page 1004]]

DOD recently asserted the current provisions in Sec. Sec.  171.8 and 
172.203(k) of the HMR do not permit technical names to be indicated in 
such a manner as former special provision 101 required. For example, a 
DOD explosive shipment approved under the generic description 
``Articles, explosive, n.o.s.'' was previously assigned special 
provision 101 in column 7 of the Sec.  172.101 Hazardous Materials 
Table that required the name of the particular substance or article to 
be specified as the technical name for the substance or article (e.g., 
``Fuze, Grenade, M219A2'') in association with the basic description. 
Therefore, PHMSA is reinstating special provision 101 for the following 
HMT entries:

UN0349 Articles, explosive, n.o.s.
UN0350 Articles, explosive, n.o.s.
UN0351 Articles, explosive, n.o.s.
UN0352 Articles, explosive, n.o.s.
UN0353 Articles, explosive, n.o.s.
UN0354 Articles, explosive, n.o.s.
UN0355 Articles, explosive, n.o.s.
UN0356 Articles, explosive, n.o.s.
UN0462 Articles, explosive, n.o.s.
UN0463 Articles, explosive, n.o.s.
UN0464 Articles, explosive, n.o.s.
UN0465 Articles, explosive, n.o.s.
UN0466 Articles, explosive, n.o.s.
UN0467 Articles, explosive, n.o.s.
UN0468 Articles, explosive, n.o.s.
UN0469 Articles, explosive, n.o.s.
UN0470 Articles, explosive, n.o.s.
UN0471 Articles, explosive, n.o.s.
UN0472 Articles, explosive, n.o.s.
UN0382 Components, explosive train, n.o.s.
UN0383 Components, explosive train, n.o.s.
UN0384 Components, explosive train, n.o.s.
UN0461 Components, explosive train, n.o.s.
UN0357 Substances, explosive, n.o.s.
UN0358 Substances, explosive, n.o.s.
UN0359 Substances, explosive, n.o.s.
UN0473 Substances, explosive, n.o.s.
UN0474 Substances, explosive, n.o.s.
UN0475 Substances, explosive, n.o.s.
UN0476 Substances, explosive, n.o.s.
UN0477 Substances, explosive, n.o.s.
UN0478 Substances, explosive, n.o.s.
UN0479 Substances, explosive, n.o.s.
UN0480 Substances, explosive, n.o.s.
UN0481 Substances, explosive, n.o.s.
UN0485 Substances, explosive, n.o.s.
UN0482 Substances, explosive, very insensitive, n.o.s. or Substances, 
EVI, n.o.s.
Special Provision 118
    Special provision 118 states that materials listing this special 
provision may not be transported under the provisions of Division 4.1 
unless specifically authorized by the Associate Administrator. In the 
UN Model Regulations the corresponding special provision, SP 272, 
contained a note that the special provision referred to UN0143. This 
special provision in the UN Model Regulations has been revised to 
indicate that the special provision applies to both UN0143 and UN0150, 
as appropriate. To maintain consistency with the UN Model Regulations, 
PHMSA is adopting this editorial note and revising special provision 
118 by adding the language ``(see UN0143 or UN0150 as appropriate)'' 
following the existing text.
Special Provision 134
    Special provision 134 is revised to note that this provision also 
applies to equipment powered by wet batteries or sodium batteries that 
are transported with these batteries installed.
Special Provision 155
    Special provision 155 states that Fish meal or fish scrap may not 
be transported if the temperature at the time of loading either exceeds 
35 [deg]C (95 [deg]F), or exceeds 5 [deg]C (9 [deg]F) above the ambient 
temperature, whichever is higher.
    PHMSA is revising special provision 155 by adding a reference to 
the new proper shipping name ``krill meal.'' Krill meal possesses 
similar self-heating hazard characteristics to fish meal and scrap; 
therefore, application of this special provision is appropriate. This 
addition clarifies that special provision 155 applies to fish meal and 
fish scrap as well as krill meal.
Special Provision 222
    Special provision 222 is added to indicate that shipments of 1.4S 
materials reclassed as ORM-D are not eligible to be offered for 
transportation by aircraft. Special provision 222 is added to the ORM-D 
entries for Cartridges, small arms, Cartridges, power device (used to 
project fastening devices).
Special Provision 237
    Special provision 237 specifies that ``Batteries, dry, containing 
potassium hydroxide solid, electric storage '' must be prepared and 
packaged in accordance with the requirements of Sec.  173.159(a), (b), 
and (c) and that for transportation by aircraft, the provisions of 
Sec.  173.159(b)(2) are applicable.
    PHMSA is adding an additional sentence to special provision 237 
clarifying the applicability of the provision. Specifically language is 
added to state that the entry for ``Batteries, dry, containing 
potassium hydroxide solid, electric storage'' may only be used for the 
transport of non-activated batteries that contain dry potassium 
hydroxide and that are intended to be activated prior to use by the 
addition of an appropriate amount of water to the individual cells.
Special Provision 238
    Special provision 238 is added to address the shipment of neutron 
radiation detectors. Neutron detection is a key component used in 
nuclear arms interdiction in addition to other applications such as 
nuclear reactor monitoring, neutron-based cancer treatments, neutron 
spallation, nondestructive testing and health physics applications. 
Most neutron radiation detectors contain boron trifluoride gas, UN1008, 
which is currently forbidden by passenger and cargo aircraft as noted 
in Columns (9A) and (9B) of the HMT. Currently, neutron radiation 
detectors that contain this gas can only be transported by air under a 
special permit.
    ICAO recently adopted a special provision specifically addressing 
neutron radiation detectors. The recently adopted special provision 
A190 permits, under certain conditions the transportation by cargo 
aircraft of neutron radiation detectors containing boron trifluoride. 
These conditions include quantity of gas limitations, and construction 
and packaging specifications. The special provision also provides that 
under certain conditions these neutron radiation detectors containing 
not more than 1 gram of boron trifluoride gas are not otherwise subject 
to the ICAO Technical Instructions.
    PHMSA granted a special permit, for the transportation by all 
modes, of certain neutron radiation detectors containing boron 
trifluoride gas. The limitations set forth in Special Provision A190 of 
the ICAO Technical Instructions do not exceed any limitations of the 
special permit and, therefore, PHMSA is adopting and applying them to 
all modes of transportation except passenger-carrying aircraft by 
incorporating them into Sec.  172.102(c)(1), Special provision 238. 
Specifically, the special provision provides packaging requirements 
(including pressure limitations), quantities permitted, and package 
construction requirements for radiation detectors containing non-
pressurized boron trifluoride gas in excess of 1 gram. The special 
provision also provides additional exceptions from the HMR based on the 
transport mode and other conditions. The special provision will be 
applicable to the entry ``UN1008, Boron trifluoride'' in the HMT. PHMSA

[[Page 1005]]

believes the adoption of this special provision provides an adequate 
level of safety for the transportation of these items, while providing 
flexibility in the need to obtain a special permit.
Special Provision 338
    A new special provision 338 is added to clarify that when lithium 
cells or batteries are contained in the fuel cell system, the item must 
be described under this entry and the entry ``Lithium batteries, 
contained in equipment.'' This special provision is applied to UN3473 
``Fuel cell cartridges or Fuel cell cartridges contained in equipment 
or Fuel cell cartridges packed with equipment, containing flammable 
liquids''; UN3476 ``Fuel cell cartridges or Fuel cell cartridges 
contained in equipment or Fuel cell cartridges packed with equipment, 
containing water-reactive substances''; UN3477 ``Fuel cell cartridges 
or Fuel cell cartridges contained in equipment or Fuel cell cartridges 
packed with equipment, containing corrosive substances''; UN3478 ``Fuel 
cell cartridges or Fuel cell cartridges contained in equipment or Fuel 
cell cartridges packed with equipment, containing liquefied flammable 
gas''; and UN3479 ``Fuel cell cartridges or Fuel cell cartridges 
contained in equipment or Fuel cell cartridges packed with equipment, 
containing hydrogen in metal hydride.''
Special Provision 360
    New special provision 360 is added and assigned to UN3091, 
``Lithium batteries, contained in equipment'' to clarify that vehicles 
powered only by lithium batteries must be assigned to identification 
number UN3071, ``Battery powered vehicle.''
Special Provision 361
    New special provision 361 is added to clarify that certain 
capacitors with limited energy storage capability are excepted from the 
HMR. Specifically, the special provision states that capacitors with an 
energy storage capacity of 0.3 Wh or less are not subject the HMR. 
Furthermore this special provision defines energy storage capacity as 
the energy held by a capacitor, as calculated using the nominal voltage 
and capacitance.
    Section 173.176 provides that capacitors not installed in equipment 
must be transported in an uncharged state and capacitors installed in 
equipment must be transported in either an uncharged state or protected 
against short circuit. Certain types of capacitors such as asymmetrical 
capacitors are designed to maintain a terminal voltage. This special 
provision also clarifies that the entry UN3499 does not apply to these 
capacitors. This special provision is applied to the new HMT entry 
UN3499, ``Capacitor, electric double layer (with an energy storage 
capacity greater than 0.3 Wh).''
    Veolia expressed concern that while manufacturers will have control 
over the charge state of a capacitor when it is offered for 
transportation, when these same capacitors are being offered for 
transportation for recycling or disposal, the recycling or disposal 
facility may not be aware of or have control over their charge state. 
Veoila further asserted that this special provision only applies to 
electric double layer capacitors with an energy storage capacity of 
greater than 0.3 Wh, and there are other types of capacitors that have 
a potential to store a significant amount of energy that may pose a 
risk during transportation. The 0.3 Wh threshold for electric double 
layer capacitors is the threshold determined by the UNSCOE below which 
a capacitor would not pose a significant risk in transportation. PHMSA 
is aware that there are additional emerging capacitor technologies that 
are under review by the UNSCOE for possible inclusion in the dangerous 
goods list.
    In this final rule PHMSA is only addressing the adoption of the 
special provision consistent with the amendment to the UN Model 
regulations. PHMSA has published an advance notice of proposed 
rulemaking (ANPRM) under Docket HM-253 (77 FR 39662, July 5, 2012) 
requesting public comment and input concerning the transportation of 
hazardous materials for recycling or disposal.
Special Provision 362
    New special provision 362 specifies when a material can be 
considered a chemical under pressure. Specifically, the special 
provision states that classification of these materials is to be based 
on hazard characteristics of the components in the propellant, the 
liquid, or the solid forms. Further, this special provision details the 
appropriate primary and subsidiary hazard classes to be assigned to 
chemical under pressure. Special provision 362 is assigned to the 
following HMT entries: UN3500, Chemical under pressure, n.o.s.; UN3501, 
Chemical under pressure, flammable, n.o.s.; UN3503, Chemical under 
pressure, corrosive, n.o.s.; UN3502, Chemical under pressure, toxic 
n.o.s.; UN3504, Chemical under pressure, flammable, toxic, n.o.s.; and 
UN3505, Chemical under pressure, flammable, corrosive, n.o.s.
Special Provision 365
    With the adoption of a new HMT entry ``UN3506 Mercury contained in 
manufactured articles'' in the 17th Revised Edition of the UN Model 
Regulations to address manufactured articles containing mercury, PHMSA 
is adding new special provision 365 stating that manufactured 
instruments and articles containing mercury should reference UN3506. 
This special provision is applied to UN2809 Mercury.
Special Provision A51
    PHMSA is adding a new special provision A51 to authorize the 
transport by passenger aircraft of wet cell aircraft batteries with a 
mass up to 100 kg net and lithium ion aircraft batteries in packages 
containing a single aircraft battery with a net mass not exceeding 35 
kg. The August 15, 2012 NPRM proposed to authorize the transport of 
aircraft batteries into Part 175 that provides exceptions from certain 
regulations for air carrier operator equipment and items of 
replacement, as well as for items used to provide customer service 
aboard an aircraft. PRBA and Saft noted the NPRM proposed to authorize 
the transport of aircraft batteries in a way that is not fully 
consistent with the 2013-2014 ICAO Technical Instructions, which do not 
limit the use of this exception to a particular aircraft operator's 
aircraft batteries. PRBA notes that such an action would frustrate the 
intent of Congress when it passed the FAA Modernization and Reform Act 
of 2012. In this final rule we are incorporating this authorization 
into a special provision consistent with the 2013-2014 ICAO Technical 
Instructions.
Special Provision A60
    Special Provision A60 permits UN2014, Hydrogen peroxide, aqueous 
solution, to be transported in excepted quantities provided a 
comparative fire test between packages containing the solution and 
identical packages containing water demonstrated no difference in the 
burning rate. The likelihood of finding discernible differences with 
more accurate test equipment used today is much greater than it would 
have been with equipment used when the test requirements were first 
developed. This more sensitive equipment often detects negligible 
differences between the two test subjects and, therefore, precludes 
transport of these small devices under the special provision. To 
address the issue, the ICAO Dangerous Goods Panel

[[Page 1006]]

(DGP) adopted a proposal to allow small differences in burning rates.
    In this final rule we are harmonizing with the ICAO Technical 
Instructions with regard to the comparative fire test for Hydrogen 
peroxide, aqueous solution. Special provision A60 is revised 
accordingly.
Special Provision A100
    Special Provision A100 states that primary (non-rechargeable) 
lithium batteries and cells are forbidden for transport aboard 
passenger-carrying aircraft and secondary (rechargeable) lithium 
batteries and cells are authorized aboard passenger-carrying aircraft 
in packages that do not exceed a gross weight of 5 kg.
    Special provision A100 is revised to clarify the weight limitations 
for secondary lithium batteries are net and not gross quantities. There 
are some combinations of authorized battery packagings that contribute 
significantly towards the gross weight of the finished package. The 
intent of this change is to indicate that the quantity limits for 
secondary lithium battery shipments aboard passenger-carrying aircraft 
are to be based on the actual weight of the batteries in each 
individual package and not the weight of the completed package.
Special Provision A103
    Special Provision A103 specifies that lithium batteries contained 
in equipment is authorized aboard passenger carrying aircraft if the 
gross weight of the inner package of secondary lithium batteries or 
cells packed with the equipment does not exceed 5 kg (11 pounds).
    Special provision A103 is revised to clarify the weight limitations 
are net and not gross quantities. There are some combinations of 
authorized battery packagings that contribute significantly towards the 
gross weight of the finished package. The intent of this change is to 
indicate that the quantity limits for secondary lithium battery 
shipments aboard passenger carry aircraft are to be based on the actual 
weight of the batteries in each individual package and not the weight 
of the completed package.
Special Provision A189
    We are adding a new special provision, A189, which is assigned to 
the HMT entry ``UN2209, Formaldehyde solutions, with not less than 25 
percent formaldehyde'' indicating how Formaldehyde solutions with more 
than 25% are to be classified. It was suggested at the ICAO DGP that 
the entry for ``UN2209, Formaldehyde solution with not less than 25% 
formaldehyde'' implied that concentrations of less than 25% 
formaldehyde were not regulated. To clarify these requirements, the 
ICAO adopted a new special provision detailing how differing percentage 
of formaldehyde solutions are regulated.
    We are adding language detailing how differing percentages of 
Formaldehyde solutions are to be regulated in the new special provision 
A189. This special provision is applied to UN3334, Aviation regulated 
liquid, n.o.s. and NA3082, Other regulated substances, liquid, n.o.s.
Special Provision A191
    In the NPRM, PHMSA proposed a new special provision, A192, noting 
that regardless of the Division 6.1 (toxic) subsidiary indicated in the 
HMT, the poison subsidiary hazard label and an indication of this 
subsidiary hazard on the shipping paper are not required for 
manufactured articles containing less than 0.45 kg (1 pound) of 
mercury. This provision aligns with the decision of the UN Sub-
Committee to ensure that transport of such articles, particularly by 
air, is not impeded due to mercury's revised classification.
    PHMSA received one comment from UPS noting that this special 
provision was assigned A191 by ICAO and not A192 as assigned by PHMSA. 
UPS also noted that ICAO provided an exception from display of the 
subsidiary ``Toxic'' label and the identification of subsidiary risk 
for up to 5 kg (11 pounds) of mercury, PHMSA proposed an exception for 
no more than 0.454 kg (1 LB). UPS sees no reason for this lack of 
alignment, but foresees unnecessary challenges arising from such 
inconsistency. Therefore, UPS urges PHMSA to align directly with the 5 
kg limit in the ICAO text. PHMSA is assigning special provision A191 to 
this entry for continuity with the international regulations. PHMSA 
agrees with UPS regarding the amount of mercury that may be present in 
manufactured articles to utilize the exception from communicating the 
subsidiary hazard, and is changing that amount to 5 kg (11 pounds).
Special Provision A200
    As previously discussed, new special provision, A200, is added 
stating the entries assigned this special provision must be transported 
as cargo when transported by aircraft and cannot be carried onboard an 
aircraft by passengers or crewmembers either in or as carry-on baggage, 
checked baggage, or on their person unless specifically excepted by 
Sec.  175.10, ``Exceptions for Passengers, Crewmembers, and Air 
Operators.'' This special provision is assigned to articles and will be 
applied to: UN3166, Engines, internal combustion or Engines, fuel cell, 
flammable gas powered; UN3166, Engines, internal combustion, or 
Engines, fuel cell, flammable liquid powered; UN3166, Vehicle, 
flammable gas powered or Vehicle, fuel cell, flammable gas powered; 
UN3166, Vehicle, flammable liquid powered or Vehicle, fuel cell, 
flammable liquid powered; UN0503, Air bag inflators, or Air bag 
modules, or Seat-belt pretensioners; and, UN3268, Air bag inflators, or 
Air bag modules, or Seat-belt pretensioners.
Special Provision B120
    Special provision B120 is added to specify the use of FBCs 
conforming to the requirements in Subpart R and Subpart S of part 178 
of this subchapter are permitted. The special provision is applicable 
to the following entries:

------------------------------------------------------------------------
            Proper shipping name                        UN No.
------------------------------------------------------------------------
Ammonium nitrate based fertilizer..........  UN2067
Ammonium nitrate, with not more than 0.2%    UN1942
 total combustible material, including any
 organic substance, calculated as carbon to
 the exclusion of any other added substance.
Calcium nitrate............................  UN1454
Environmentally hazardous substance, solid,  UN3077
 n.o.s.
Magnesium nitrate..........................  UN1474
Naphthalene, crude or Naphthalene, refined.  UN1334
Paraformaldehyde...........................  UN2213
Potassium nitrate..........................  UN1486
Sodium carbonate peroxyhydrate.............  UN3378
Sodium nitrate.............................  UN1498
Sodium nitrate and potassium nitrate         UN1499
 mixtures.

[[Page 1007]]

 
Sodium perborate monohydrate...............  UN3377
Sulfur (domestic and international entries)  UN1350
------------------------------------------------------------------------

    FBCs must conform to the performance-oriented construction 
standards and testing criteria in new subparts R and S of part 178. In 
addition, shipments of FBCs must be prepared and otherwise conform to 
the general requirements for bulk packages in subpart B of part 173 and 
the new Sec.  173.37.
IBC Codes
    In a final rule published in the Federal Register on January 19, 
2011 (76 FR 3308; HM-215K), the Table 1 (IBC Codes) in paragraph (c)(4) 
were editorially revised to remove UN Specifications 31A, 31B and 31N 
from IBC Codes IB4 through IB8. The revision was consistent with 
amendments to international standards that removed the specifications 
from the indicated codes in the table because IBC Codes IB4 through IB8 
are assigned to solids, whereas, UN Specifications 31A, 31B, and 31N 
are authorized for transportation of liquids in IBC Codes IB1 through 
IB3 and are assigned to liquid materials only. In the January 19, 2011 
final rule, PHMSA inadvertently failed to also remove the remaining 
liquid IBC specifications (31H1, 31H2, 31HZ1, and 31HZ2) from IB Codes 
IB4 through IB8. Therefore, PHMSA is editorially correcting the IBC 
Code Table in Sec.  172.102(c)(4).
Special Provision TP39
    Special provision, TP39, is added and assigned to HMT entry 
``UN2381, Dimethyl disulfide.'' This special provision indicates that 
portable tank instruction T4 may continue to be applied until December 
31, 2018. This provides more time for portable tank transporters to 
transition their current fleets.
Special Provision TP40
    Special provision TP40 is added and assigned to HMT entries 
``UN3500, Chemical under pressure, n.o.s.; UN3501, Chemical under 
pressure, flammable, n.o.s.; UN3503, Chemical under pressure, 
corrosive, n.o.s., UN3503; UN3502, Chemical under pressure, toxic 
n.o.s.; UN3504, Chemical under pressure, flammable, toxic, n.o.s.; and 
UN3505, Chemical under pressure, flammable, corrosive, n.o.s.'' The 
special provision indicates that the portable tanks must not be 
transported when connected with spray application equipment. This 
provides an additional measure preventing inadvertent release of 
hazardous materials in transport.
Special Provision TP41
    Special provision TP41 is added and assigned to HMT entries 
``UN3148, Water-reactive liquid, n.o.s.,'' indicating that the portable 
tank instruction T9 may continue to be applied until December 31, 2018.
Special Provision T50
    Special provision T50 is revised to note that this provision is 
applicable to chemicals under pressure as well as liquefied compressed 
gases. Special provision T50 would be assigned to HMT entries ``UN3500, 
Chemical under pressure, n.o.s.; UN3501, Chemical under pressure, 
flammable, n.o.s.; UN3503, Chemical under pressure, corrosive, n.o.s., 
UN3503; UN3502, Chemical under pressure, toxic n.o.s.; UN3504, Chemical 
under pressure, flammable, toxic, n.o.s.; and UN3505, Chemical under 
pressure, flammable, corrosive, n.o.s.''
Special Provision W10
    Special provision W10 is added and assigned to HMT entries ``UN3486 
Calcium hypochlorite mixture, dry, corrosive with more than 10% but not 
more than 39% available chlorine'' and to ``UN2208 Calcium hypochlorite 
mixtures, dry, with more than 10 percent but not more than 39 percent 
available chlorine'' indicating that when offered for transportation by 
vessel, the use of large packagings is prohibited. This provision is 
adopted to align with a recent IMO change forbidding these commodities 
from being transported by vessel in large packages.
    PHMSA received two comments (DGAC & IVODGA) on our proposal to 
adopt new special provision W10. IVODGA supported placing W10 in column 
7 of the HMT in order for the UN2208 & UN3486 entries to harmonize with 
the IMDG Code. DGAC recommended against placing W10 in column 7 of the 
HMT for the UN2208 & UN3486 entries. DGAC also requested that PHMSA 
elaborate as to why this change is needed on a safety basis. The IMO 
Sub-Committee on Dangerous Goods, Solid Cargoes and Containers (DSC) at 
their 14th session; decided not to assign LP02 to UN3486 to be 
consistent with the assignment of packing authorizations for UN2208, a 
material exhibiting similar characteristics. To remain harmonized with 
the IMDG Code PHMSA will be adopting W10 as proposed in the August 15, 
2012 NPRM.
Section 172.202
    Section 172.202 establishes requirements for shipping descriptions 
on shipping papers. As part of these shipping paper requirements, in 
many situations a net or gross quantity of the hazardous materials 
transported must be included. At the 23rd meeting of the ICAO DGP, the 
issue of notation of quantities on shipping documents was raised. 
Specifically, it was noted that some confusion exists as to whether or 
not the net quantity or a gross mass is required on the shipping 
documents on particular shipments, such as limited quantities. At this 
meeting an amendment to the ICAO Technical Instructions was adopted to 
clarify what quantities (i.e. net or gross quantity) were required on 
the transport document for packages containing limited quantities when 
different hazardous materials are packed together in the same outer 
packaging.
    PHMSA is adopting a similar provision to the one addressed by the 
ICAO DGP discussed above. Specifically, PHMSA is adding a new paragraph 
(a)(6)(vii) stating that for shipments containing hazardous materials 
in limited quantities with a ``30 kg gross'' limit in Column (9A) or 
(9B) of the Sec.  172.101 Hazardous Materials Table and different 
hazardous materials packed together in the same outer packaging, the 
net quantity of each hazardous material followed by the gross mass of 
the completed package must be shown on the shipping paper.
    This clarification addresses a transport scenario currently not 
addressed in the HMR thus alleviating confusion regarding the shipping 
paper requirements of such shipments. Furthermore, this harmonizes the 
HMR with the ICAO Technical Instructions and avoids shipping paper 
discrepancies for international shipments.
Section 172.203
    This section details additional description requirements that are 
required for certain shipments of hazardous materials. PHMSA is 
amending paragraph (i)(3) to cross reference the IBR Sec.  171.7.

[[Page 1008]]

Section 172.301
    This section details the general marking requirements for non-bulk 
packagings. Specifically, this section states what information (proper 
shipping name and identification number, technical names, consignee's 
or consignor's name, etc.) must be displayed on the outside of non-bulk 
packages. While the HMR requires that an identification number, 
preceded by ``UN'' or ``NA'' as appropriate, be marked on the outside 
of a non-bulk packaging a specific size of this marking is not 
specified.
    In this final rule, PHMSA is adding specific size requirements for 
the ``UN'' or ``NA'' markings. These markings must be marked in 
characters at least 12 mm (0.47 inches) high, however, packages with a 
maximum capacity of 30 liters (7.92 gallons) ,30 kg (66 pounds), or 
cylinders with a maximum water capacity of 60 liters (16 gallons) must 
be marked with characters at least 6 mm (0.2 inches) high and packages 
having a maximum capacity 5 liters (1.32 gallons) or 5 kg (11 pounds) 
or less must be marked in a size appropriate for the size of the 
package.
    PHMSA is adopting this minimum size marking for the ``UN'' or 
``NA'' markings to align with newly adopted requirements in the 17th 
Revised Edition of the UN Model Regulations. PHMSA recognizes the 
importance of establishing a minimum size requirement for the 
internationally recognized ``UN'' identification number marking system. 
Without a minimum size requirement for hazard communication, shippers 
may mark packages in a format that makes it difficult for first 
responders to identify the commodity associated with a particular 
package.
    In response to the NPRM, PHMSA received several comments concerning 
this proposed requirement. DGAC and Dow suggested extending the 
compliance date for this provision to January 1, 2017 to allow 
companies time to make the transition, and for the depletion of both 
finished product and prepackaged inventory that do not meet the 
requirements of the proposal.
    Veolia noted that their company's propriety software produces 
markings that would not be in compliance with the proposed size 
limitations and that they would incur a cost to reprogram their system 
if the proposal is maintained. They further contended that in 20 years 
of displaying the marking they are unaware of any instances of the 
markings being questioned as being too small or illegible. Veolia 
requested that the minimum size requirement apply to international 
shipments only.
    Stericycle and the HWI requested an exception to this marking 
requirement for dedicated carriers of regulated medical waste. These 
commenters stated that the proposed change would impose a significant 
cost on the industry. They requested an exception for the continued use 
of existing containers used to transport regulated medical waste and 
permanently marked with the applicable ``UN'' number.
    PHMSA accepts that many packages are currently marked in a manner 
that may not in all cases meet the new minimum size standards. In 
response to the comments raised to the NPRM we will provide, for 
domestic transportation, a transition period to continue using non-bulk 
packagings displaying ``UN'' or ``NA'' number markings in accordance 
with the requirements in effect on October 1, 2011 (i.e., no minimum 
size), until January 1, 2017.
    PHMSA maintains that there is benefit to harmonization in this 
case, and having a single standard outweighs the cost incurred by a 
company to revise its software and systems to produce compliant 
markings. The transition period for the continued use of the current 
markings in domestic transportation provides an opportunity for 
companies to revise their marking systems and maintain compliance. 
PHMSA is sympathetic to the assertion that the containers used to 
transport regulated medical waste are often permanently stamped with 
the ``UN'' number and the containers often have very long useful lives. 
Therefore PHMSA is also including an exception that allows packages 
that are permanently marked with the UN number (e.g., by embossing or 
through a heat stamp process) and are manufactured prior to January 1, 
2017 to continue in service for the life of the container.
    DGAC noted that while an inch conversion was provided in the 
preamble there is no inch conversion noted in the regulations text. 
This was an oversight and has been corrected in this final rule.
    COSTHA questioned if the minimum size of the ``UN'' number markings 
should be dictated by the maximum capacity of the outer package or the 
inner packagings. COSTHA proposed an example package consisting of 2 
inner packagings of 4 L each. Maximum capacity is defined in Sec.  
171.8 as ``the maximum inner volume of receptacles or packagings.'' A 
package containing 2 inner packagings with a maximum capacity of 4 L 
each would have a maximum capacity of 8 L, and thus would require a 6 
mm minimum UN number marking.
    It was also noted that the UNSCOE, at its 39th session, provided an 
exception from minimum marking size requirements for cylinders of 60 
liters water capacity or less. PHMSA agrees that cylinder markings have 
historically been allowed provisions that would allow for smaller UN 
number markings than other non-bulk packages and is providing an 
exception for cylinders of 60 liters water capacity or less consistent 
with the recent UNSCOE exception.
    Therefore, with the aforementioned transition period, exceptions, 
and note, PHMSA is specifying a marking size consistent with package 
marking sizes adopted in the 17th Revised Edition of the UN Model 
Regulations.
Section 172.312
    Section 172.312 details the specific marking requirements for 
liquid hazardous materials in non-bulk packagings. Paragraph (a) of 
this section describes scenarios when package orientation arrows must 
be displayed on the outside of a package. Provided certain criteria are 
met, paragraph (c) excepts certain shipments from the requirements of 
paragraph (a) and thus, the requirement to display the package 
orientation arrows on the package. Currently Sec.  173.312(c)(3) states 
that when offered or intended for transportation by aircraft, packages 
containing flammable liquids in inner packagings of 120 mL (4 fluid 
oz.) or less prepared in accordance with Sec.  173.150(b) or (c) of 
this subchapter when packed with sufficient absorption material between 
the inner and outer packagings to completely absorb the liquid contents 
are not required to display the package orientation arrows on the 
outside of the package. The ICAO TI have been amended to extend this 
exception to the package orientation markings to all liquid hazardous 
materials in inner packagings of 120 mL (4 fluid oz.) when packed with 
sufficient absorption material between the inner and outer packagings 
to completely absorb the liquid contents. PHMSA is adopting this 
change, consistent with the amendment made to the ICAO TI to extend the 
exception for the display of the package orientation arrows to all 
liquid hazardous materials in inner packagings of 120 mL (4 fluid oz.) 
when packed with sufficient absorption material between the inner and 
outer packagings to completely absorb the liquid contents.

[[Page 1009]]

Section 172.407
    This section provides label specifications. PHMSA is amending 
paragraph (f) to include a cross reference to the IBR Sec.  171.7.
Section 172.604
    Section 172.604 prescribes emergency response telephone number 
requirements. Paragraph (d) of this section provides a listing of 
materials that are excepted from the requirement to provide an 
emergency response telephone number on a shipping document.
    PHMSA is adding ``Krill Meal, PGIII'' to the list of materials 
excepted from the emergency response telephone number requirements. 
Krill meal poses similar hazards to fish scrap and meal; therefore, we 
are providing Krill meal with the same exception from the emergency 
response telephone number requirements as fish scrap and meal.

Part 173

    Part 173 of the HMR describes the general requirements for 
shipments and packagings of hazardous materials. Consistent with 
amendments adopted by the UN Model Regulations, PHMSA is adopting 
changes throughout the Part 173 packaging requirements to authorize 
more flexibility when choosing packages for hazardous materials. 
Specifically PHMSA is authorizing the use of the following packaging 
types and materials:
    The specific packaging requirements for Class 1 explosive materials 
are specified in Sec.  173.62. In this final rule PHMSA is revising 
Sec.  173.62 to authorize wood as an appropriate material used to 
construct receptacles, inner and outer intermediate packagings, and 
intermediate packagings/dividing partitions for certain explosives. 
Furthermore, PHMSA is authorizing the use of metals other than steel or 
aluminum in specification packagings, specifically drums (1N1 or 1N2) 
and boxes (4N), as appropriate. This authorization does not include 
chlorosilanes under Sec.  173.206 because of corrosion concerns. 
Otherwise, it authorizes the use of closed head drums where open head 
drums are generally permitted. PHMSA believes these amendments provide 
greater flexibility in packaging while maintaining an equivalent level 
of safety.
    Consistent with amendments adopted by the ICAO Technical 
Instructions, PHMSA is adopting changes in various sections on Part 173 
where certain articles, items, and materials are excepted from the 
requirements of the subchapter. There is a potential for these excepted 
articles, items, and materials to be inappropriately carried aboard an 
aircraft by passengers or crewmembers. The changes will address this 
concern by clarifying that certain excepted articles, items and 
materials, identified by ICAO as posing a safety risk, must be 
transported as cargo and cannot be carried onboard an aircraft by 
passengers or crewmembers as carry-on baggage, checked baggage, or on 
their person unless specifically excepted by Sec.  175.10, ``Exceptions 
for Passengers, Crewmembers, and Air Operators.'' The amended sections 
include Sec. Sec.  173.159a, 173.162, 173.164, 173.175, 173.219, and 
173.306. For UN3166 and UN3268, Special Provision A200 is created to 
communicate this requirement and a reference to special provision A200 
is placed in column 7 of the HMT for these entries. In response to the 
NPRM, COSTHA and Mercotac, suggested changes to regulatory text 
language to eliminate confusion that these items may only be able to be 
transported as cargo. PHMSA has revised the language in Sec. Sec.  
173.159a, 173.162, 173.175, 173.219, and 173.306 to be consistent with 
the language in special provision A200 that these excepted articles, 
items and materials must be transported as cargo and cannot be carried 
onboard an aircraft by passengers or crewmembers as carry-on baggage, 
checked baggage, or on their person unless specifically excepted by 
Sec.  175.10.
    PHMSA received one comment from the FCHEA requesting that we amend 
Sec.  175.10(a)(19) to allow fuel cell cartridges containing flammable 
gas in division 2.1 and fuel cells containing water reactive materials 
in division 4.3 in checked passenger baggage. PHMSA did not propose 
changes to the provisions allowing for the checking limited types of 
fuel cells in the NPRM, and consider this request to be outside the 
scope of this rulemaking.
Section 173.4b
    This section specifies exceptions for materials packaged in de 
minimus quantities. In the NPRM, PHMSA proposed and is subsequently 
adopting in this final rule, an exception in Sec.  175.10(a)(22) to 
permit non-infectious specimens packaged in accordance with Sec.  
173.4b(b) to be carried aboard an aircraft by passengers and 
crewmembers in checked or carry-on baggage or on their person. In the 
NPRM we inadvertently neglected to revise the language in Sec.  
173.4b(b)(8) to recognize this exception. In this final rule, PHMSA is 
revising Sec.  173.4b(b)(8) to reference the adopted exception in Sec.  
175.10(a)(22).
Section 173.12
    This section specifies the exceptions for shipment of waste 
materials including the requirements for waste packages known as ``lab 
packs.'' A lab pack, although not specifically defined in Sec.  171.8, 
is considered a large outer packaging containing small inner packagings 
that are filled with various compatible laboratory hazardous wastes. 
Paragraph (b) of this section specifies the authorized inner and outer 
packagings for lab packs.
    In this final rule, PHMSA is revising paragraph (b)(2)(ii)(a) of 
this section by adding 1N2 metal drums to the permitted outer 
packagings currently authorized for a lab pack.
Section 173.21
    Section 173.21 prescribes materials and packages forbidden for 
transport. In this final rule, PHMSA is correcting the IMDG Code 
section reference to control temperature requirements in Sec.  
173.21(f)(3)(ii) from 7.7 to 7.3.7.
Section 173.37
    Currently, the HMR does not include a section that prescribes 
general requirements for packaging hazardous materials in Flexible Bulk 
Containers (FBCs). In this final rule, PHMSA is adding such 
requirements in new Sec.  173.37 in a similar format to the general 
requirements for other bulk and large packagings (e.g., portable tanks, 
IBCs, etc.) in subpart B of part 173. This section includes, but is not 
be limited to, requirements addressing the initial use and reuse of 
FBCs, capacity requirements and general transport conditions. 
Consistent with the use and reuse requirements of other large and bulk 
packagings, the general requirements in part 173 complement the 
construction and manufacture specifications for such bulk packagings in 
part 178 of the HMR.
    PHMSA is authorizing the reuse of FBCs. The FBC must be given a 
visual examination prior to reuse. Furthermore, the general 
requirements for FBCs specify that FBCs must be transported in a 
conveyance with rigid sides and ends that extend at least two-thirds 
the height of the FBC, must not be offered for transportation in 
freight containers, and may not exceed 15 cubic meters in capacity.
Section 173.50
    Section 173.50 provides definitions for the various divisions of 
Class 1 (explosives) referenced in Subpart C of Part 173. Paragraph (b) 
of this section notes that Class 1 (explosives) are divided into six 
divisions. Division 1.6 is described as an explosive consisting

[[Page 1010]]

``of extremely insensitive articles that do not have a mass explosive 
hazard. This division is comprised of articles that contain only 
extremely insensitive detonating substances and that demonstrate a 
negligible probability of accidental initiation or propagation.''
    In this final rule, PHMSA is removing the word ``detonating'' from 
this definition to align with the revised definition provided in the 
17th Revised Edition of the UN Model Regulations.
Section 173.56
    Section 173.56 prescribes the definition of new explosives and 
provides explosive (Class 1) classification and approval requirements. 
Paragraph (h) of Sec.  173.56 states that small arms ammunition, within 
certain parameters is not subject to the approval requirements of the 
rest of Sec.  173.56.
    PHMSA received a comment from SAAMI requesting that PHMSA amend 
Sec.  173.56 to except Cases, cartridge, empty with primer and 
Cartridges for tools, blank from the approval requirements of Sec.  
173.56. SAAMI noted that for Cartridges for tools, blank the switch 
from UN 0323 to UN 0014 could necessitate new EX approvals for products 
which are essentially identical to those already exempted. SAAMI noted 
that Cases, cartridge, empty with primer refers to small arms 
cartridges with no bullet or propellant but with a primer, just an 
empty primed case. SAAMI stated that Cases, cartridge, empty with 
primer of 50 caliber or less clearly meet the intent and equivalent 
level of safety to products already referenced in 173.56(h).
    PHMSA is amending Sec.  173.56(h) to ensure Cartridges for tools, 
blank that meet the conditions of that paragraph are excepted from the 
requirements of the rest of this section. PHMSA believes this to be a 
natural extension of the intent of the exception in Sec.  173.56(h) as 
well as a necessary domestic change that is a direct result of 
international rulemaking.
    PHMSA will not be adding Cases, cartridge, empty with primer to 
Sec.  173.56(h). PHMSA believes Cases, cartridge, empty with primer to 
be materially different from those articles currently authorized for 
the exception in Sec.  173.56(h). The proposed addition of Cases, 
cartridge, empty with primer to Sec.  173.56(h) is also not a direct 
result of international rulemaking and this rulemaking vehicle is not 
suited for such a proposal.
Section 173.59
    Section 173.59 provides definitions of explosive terms related to 
the transport and classification of explosives used throughout subpart 
C of part 173. These definitions are intended for information only and 
are not to be used for purposes of classification or to replace proper 
shipping names prescribed in Sec.  172.101. In the UN Model 
Regulations, Appendix B to Chapter 3 contains a similar list of 
explosive definitions which are also intended for information only and 
are not to be used for purposes of hazard classification.
    In April 2010, the United States and the United Kingdom submitted a 
formal document regarding proposed modifications to the UN test series 
7 for consideration by the UN Subcommittee of Experts on the Transport 
of Dangerous Goods. Test series 7 is used to classify explosives into 
the appropriate class.\1\ This paper sought to modify the test series 7 
to more accurately address the classification of Division 1.6. 
Specifically, Division 1.6 is for extremely insensitive detonating 
articles and the proposed changes in the US/UK paper are designed to 
ensure that the probability of accidental initiation or propagation of 
an article attaining this division remains negligible.
---------------------------------------------------------------------------

    \1\ The scientific data regarding the adoption of these 
modifications are presented in working paper ST/SG/AC.10/C.3/2010/40 
entitled ``Proposed modifications to Test Series 7.'' This paper can 
be viewed at the following URL: http://www.unece.org/fileadmin/DAM/trans/doc/2010/ac10c3/ST-SG-AC10-C3-2010-40e.pdf.
---------------------------------------------------------------------------

    In the 17th Revised Edition of the UN Model Regulations, the 
proposals presented in the US/UK paper regarding the UN test series 7 
were adopted. Among the adopted proposals was the addition of various 
explosive specific definitions referencing the modifications to the UN 
test series 7. In this final rule, we are revising the various 
definitions prescribed in Sec.  173.59. Specifically, we revised the 
definition for ``Articles, explosive, extremely insensitive (Articles, 
EEI)'' by removing the word ``detonating'' and adding the words 
``tools'' after ``starter pistols'' in the definition for ``Cartridges, 
blank.'' We also replaced the definition for ``Explosive, extremely 
insensitive detonating substances (EIDS)'' with a new definition for 
``Explosive, extremely insensitive substances (EIS).'' Lastly, we added 
a definition for ``Auxiliary explosive component, isolated.'' The 
addition of and revisions to these definitions provide consistency with 
international regulations and clarity when utilizing the UN test series 
7 for explosive classification.
    PHMSA received one comment form SAAMI that requested we revise the 
proposed definition of Cartridges, blank. The definition proposed by 
SAAMI was ``Cartridges, blank. Articles that consist of a cartridge 
case with a center or rim fire primer, with or without a confined 
charge of smokeless or black powder, but with no projectile. Used in 
training, saluting, or in starter pistols, tools, etc.'' SAAMI's 
proposal would remove the requirement for Cartridges, blank to contain 
a confined charge of smokeless powder. This SAAMI proposed definition 
is not consistent with the UN adopted definition for Cartridges, blank. 
Additionally adopting the definition proposed by SAAMI may conflict 
with the standing definition for Cases, cartridge empty with, primer. 
For the aforementioned reasons, PHMSA is adopting the definition as 
proposed in the August 15, 2012 NPRM.
Section 173.62
    Section 173.62 prescribes the specific packaging requirements for 
explosives. These packaging requirements stipulate the permitted inner, 
intermediate, and outer packagings as well as any specific additional 
packaging information. These packaging requirements are generally 
aligned with the requirements stipulated in the UN Model Regulations.
    In this final rule, PHMSA is revising various packaging provisions 
in the ``Table of Packing Methods'' in this section to align with 
changes adopted in the 17th Revised Edition of the UN Model 
Regulations. The revisions to the authorized packaging methods provide 
greater flexibility when packaging explosives while retaining an 
appropriate level of safety. These changes include, but are not limited 
to, permitting various explosives to be transported in closed head 
drums in addition to the already permitted removable head drums and 
adding the option to utilize wooden inner and intermediate packagings 
in various packaging provisions.
Section 173.63
    Section 173.63 provides packaging exceptions for specific types of 
low hazard explosive materials including certain detonators, small arms 
ammunition and detonating cord. PHMSA received one comment from SAAMI 
requesting that PHMSA clarify its intent to allow these articles to 
display either the ground limited quantity mark or the air limited 
quantity mark regardless of the mode of transport.
    In this final rule PHMSA is clarifying the language in Sec.  
173.63(b)(2) to clearly state that a limited quantity of 1.4S material 
may be marked with either the surface or the air limited quantity

[[Page 1011]]

marking regardless of mode of transport. However, PHMSA also notes that 
in October of 2012 the ICAO Dangerous Goods Panel Working Group of the 
Whole (DGP-WG/12) considered, but did not adopt, a proposal to 
authorize limited quantities of certain 1.4S articles. DGP-WG/12 did 
note that packages bearing the limited quantity marking of other modes 
could still be accepted for air transport provided all additional 
requirements of the ICAO Technical Instructions were met. As a result 
of the DGP-WG/12 decision PHMSA and FAA believe retaining the option to 
display the air limited quantity marking by all modes may result in 
confusion and potentially frustrate shipments of packages that display 
the air limited quantity marking in air transit.
    As a result of the recent DGP-WG/12 decision PHMSA and FAA plan to 
consider removing the authorization to display the air limited quantity 
marking for limited quantity materials packaged in accordance with 
Sec.  173.63(b)(2) in a future rulemaking, as such a change was not 
proposed in the NPRM to this final rule.
    PHMSA received one comment from SAAMI requesting that the recent UN 
assignment of limited quantity packaging authorizations to Cases, 
cartridges, empty with primer (UN0055) be extended to this commodity in 
the HMR. PHMSA agrees and has made the relevant text changes to Sec.  
173.63. SAAMI also commented that the ORM-D entries removed from the 
table should be left until the expiration of the transitional period 
for their use. PHMSA agrees and has inserted those proper shipping 
names back into Sec.  173.63.
Section 173.115
    Section 173.115 prescribes the definitions for Class 2 materials. 
Paragraph (k) of this section specifies how the oxidizing ability of 
certain Division 2.2 gases is determined. Currently, the HMR references 
ISO standards that include test and calculations used to determine the 
oxidizing ability of certain Division 2.2 gases. The UN Model 
Regulations and the ICAO Technical Instructions replace references to 
ISO standards 10156:1996 and 10156-2:2005 with the updated version ISO 
10156:2010.
    Based on its technical review, PHMSA believes the updated standard 
provides an adequate level of safety and is referencing the standard in 
this section and adding it to the list of IBR materials in Sec.  171.7.
Section 173.121
    Section 173.121 prescribes the requirements for selection of 
packing groups for Class 3 flammable liquids. Paragraph (b) of this 
section describes the criteria for inclusion of viscous Class 3 
materials in Packing Group III.
    ICAO adopted requirements in the Technical Instructions that 
increased the quantity of viscous Class 3 flammable liquids permitted 
reclassification from Packing Group II to Packing Group III from 30 L 
(7.9 gal) per package to 100 L (26.42 gal) per package when offered for 
transport by cargo aircraft.
    In this final rule, PHMSA is expanding the per package amounts of 
viscous Class 3 material meeting the requirements in Sec.  173.121(b). 
The increase will facilitate multi-modal transportation by permitting 
shipments offered by highway, rail, and cargo-carrying aircraft to 
utilize the same 100 L criteria.
Section 173.134
    Provisions contained in the UN Model Regulations, Chapter 2.6, 
Class 6--Toxic and Infectious Substances, relating to the 
transportation of medical devices and equipment, have been amended to 
except medical equipment which has been drained of free liquid from the 
requirements of the UN Model Regulations. In addition, except for 
medical devices or equipment being transported for disposal, or medical 
devices or equipment contaminated with or suspected of contamination 
with a Category A infectious substance, the UN Model Regulations have 
been amended to exempt medical devices or equipment potentially 
contaminated with or containing infectious substances which are being 
transported for disinfection, cleaning, sterilization, repair or 
equipment evaluation from all other requirements of the UN Model 
Regulations, provided they meet certain packaging requirements.
    PHMSA is amending Sec.  173.134, ``Class 6, Division 6.2--
Definitions and Exceptions'' by adopting the additional exemptions for 
medical devices and equipment.
Section 173.158
    Section 173.158 prescribes packaging requirements for nitric acid 
mixtures of varying concentrations. PHMSA is revising the list of outer 
packagings permitted for nitric acid mixtures of varying 
concentrations.
    Specifically, PHMSA is revising paragraph (d)(2) by adding 1N2, 4A, 
4B and 4N packagings to the list of authorized outer packagings of 
combination packages for Nitric acid of 90 percent or greater 
concentration, when offered for transportation or transported by rail, 
highway, or water, in addition to the packaging options currently 
authorized.
    PHMSA is also revising paragraph (e) of this section pertaining to 
nitric acid of less than 90 percent concentration, when offered for 
transportation or transported by rail, highway, or water. Specifically, 
this paragraph is revised to permit packagings of specification 4A, 4B, 
or 4N metal boxes for certain nitric acid concentrations.
    Further, PHMSA is revising paragraphs (f)(3), (g) and (h) by adding 
specification 1N2, 4A, 4B and 4N packagings to the list of authorized 
outer packagings of combination packagings for Nitric acid of the 
following concentrations; (1) Nitric acid of 70 percent or less 
concentration, when offered for transportation or transported by rail, 
highway, or water; (2) Nitric acid of more than 70 percent 
concentration, when offered for transportation or transported by cargo 
aircraft only; and (3) Nitric acid of less than 70 percent 
concentration, when offered for transportation in cargo aircraft only.
    The addition of these packaging options will increase flexibility 
for shippers when determining the appropriate packaging for nitric acid 
mixtures, in addition to the packaging options currently authorized.
Section 173.159a
    Section 173.159a provides exceptions for non-spillable batteries. 
Paragraph (d) of this section excepts non-spillable batteries from the 
requirements of the HMR provided certain criteria, including specific 
packaging requirements and the absence of free-flowing liquid in the 
battery, are met.
    In this final rule, PHMSA is clarifying paragraph (d) of this 
section by adding a new subparagraph (d)(3) stating that ``for 
transport by aircraft, must be transported as cargo and may not be 
carried onboard an aircraft by passengers or crewmembers in carry-on 
baggage, checked baggage, or on their person unless specifically 
excepted by Sec.  175.10.'' This clarification will align the HMR with 
the previously discussed changes made to the ICAO TI with regard to the 
air transport of non-spillable batteries that are excepted from the 
HMR.
Section 173.160
    Section 173.160 prescribes packaging requirements for ``Bombs, 
smoke, non-explosive'' when shipped without ignition devices. PHMSA is 
revising the

[[Page 1012]]

list of packagings permitted for ``Bombs, smoke, non-explosive'' 
shipped without ignition devices. Specifically, PHMSA is adding the 
authorization to use metal (4A, 4B, and 4N), fiberboard (4G) or solid 
plastic (4H2) boxes, or metal (1A2, 1B2, and 1N2), plastic (1H2), 
plywood (1D), or fiber (1G) drums.
Section 173.162
    Section 173.162 prescribes the packaging requirements for ``UN2803, 
Gallium.'' PHMSA is revising paragraph (a)(1), to permit both open and 
closed steel, metal, other that steel and aluminium drums (1A1, 1N1, 
1N2, 1H1, 3A2 or 3H2) in addition to the packaging options currently 
authorized.
    Further, PHMSA is revising paragraph (a)(2), to permit metal, other 
than steel or aluminium (4N) boxes; metal, other than steel or 
aluminium drums (1N1, 1N2); and plastic drums (1H1 or 1H2) in addition 
to the packaging options currently authorized.
    In addition, PHMSA is clarifying paragraph (c) by stating that 
``for transport by aircraft, must be transported as cargo and may not 
be carried onboard an aircraft by passengers or crewmembers in carry-on 
baggage, checked baggage, or on their person unless specifically 
excepted by Sec.  175.10.'' This clarification will align the HMR with 
the previously discussed changes adopted in the ICAO Technical 
Instructions regarding the air transport of gallium otherwise excepted 
from the HMR.
Section 173.164
    Section 173.164 prescribes the packaging requirements for Mercury 
(metallic and articles containing mercury). In this final rule, PHMSA 
is revising paragraph (a)(1), to permit steel drums; metal, other that 
steel and aluminum drums (1A1, 1N1, 1N2) and metal, other than steel or 
aluminum boxes (4N), in addition to the packaging options currently 
authorized in paragraphs (a), (b) and (c).
    Paragraph (f) is added to provide an exception to the requirements 
of the HMR for vessel transport of manufactured articles or instruments 
containing less than 0.45 kg (1.0 pound) of mercury. This exception is 
inserted to mirror an existing IMDG Code provision and harmonize the 
requirements for vessel shipments of mercury contained in manufactured 
articles as much as possible.
    In addition, PHMSA is clarifying paragraphs (a)(5), (b), and (c)(2) 
of this section by adding the phrase ``when transported as cargo.'' 
This clarification will align the HMR with the previously discussed 
changes adopted in the ICAO Technical Instructions regarding the air 
transport of manufactured articles containing mercury otherwise 
excepted from the HMR.
Section 173.165
    Section 173.165 prescribes the transport and packaging requirements 
for polyester resin kits. PHMSA is revising Sec.  173.165 to better 
align the packaging and other requirements for UN3269, Polyester resin 
kits with the various international modal standards. These amendments 
correct inconsistencies adopted in a final rule published in the 
Federal Register on January 19, 2011 (76 FR 3308; HM-215K).
Section 173.175
    Section 173.175 prescribes the transport and packaging requirements 
for permeation devices. Currently, permeation devices containing 
hazardous materials that are used for calibrating air quality 
monitoring devices are not subject to the HMR provided they meet 
specific requirements that include packaging, quantity limitations, 
testing, and transport controls.
    PHMSA is adding a new paragraph (g) stating that ``for transport by 
aircraft, must be transported as cargo and may not be carried onboard 
an aircraft by passengers or crewmembers in carry-on baggage, checked 
baggage, or on their person unless specifically excepted by Sec.  
175.10.'' This clarification aligns the HMR with changes adopted in the 
ICAO Technical Instructions regarding the air transport of permeation 
devices that are otherwise excepted from the HMR.
Section 173.176
    Electric double layer capacitors are devices that store but do not 
produce electrical energy. They contribute to increased fuel efficiency 
in many alternative energy solutions such as hybrid vehicles. Some 
double layer capacitors contain flammable liquid absorbed in a solid 
with small amounts present as free liquid while others use a liquid 
electrolyte. Currently, the HMR do not contain specific requirements to 
address the transport of electric double layer capacitors.
    New Section 173.176 addresses electric double layer capacitors, 
prescribing the testing, marking, safety, and packaging requirements 
for electric double layer capacitors with an energy storage capacity 
greater than 0.3 Wh. PHMSA is incorporating these requirements 
consistent with the 17th Revised Edition of the UN Model Regulations. 
These amendments address potential electrical and other hazards arising 
from the release of hazardous materials during the transportation of 
these articles.
Section 173.181
    Section 173.181 prescribes the non-bulk packaging requirements 
applicable to pyrophoric liquids. Paragraph (b) of this section 
specifies the specification boxes authorized to package these 
substances. PHMSA is revising paragraph (b) by adding packaging 
authorizations for steel boxes (4A), aluminum boxes (4B), metal boxes, 
other than steel or aluminum (4N), or fiberboard boxes (4G); steel 
drums (1A1 or 1A2), aluminum drums (1B1 or 1B2), metal drums, other 
than steel or aluminum (1N1 or 1N2), plywood drums (1D), or fiber drums 
(1G); or steel jerricans (3A1 or 3A2) or aluminum jerricans (3B1 or 
3B2).
Section 173.183
    Section 173.183 prescribes the packaging requirements for 
nitrocellulose base film. To provide greater flexibility in packaging 
selection, PHMSA is adding other metal drums (4A2), aluminum jerricans 
(3B2), and steel, aluminum or other metal (4A, 4B, 4N) boxes, to the 
list of authorized packagings.
Section 173.184
    Section 173.184 provides the definition and packaging requirements 
for highway or rail fusees. To provide greater flexibility in packaging 
selection, steel (1A2), aluminum (1B2) or other metal (1N2) drums; 
steel (3A2) or aluminum (3B2) jerricans; and steel (4A), aluminum (4B) 
or other metal (4N) boxes are added to the list of authorized 
packagings.
Section 173.186
    Section 173.186 provides definitions and packaging requirements for 
various types of matches. To provide greater flexibility in packaging 
selection, PHMSA is adding packaging options to the list permitted for 
strike-anywhere matches specified in paragraph (f) of this section. 
Specifically steel drums (1A1 or 1A2), aluminum drums (1B1 or 1B2), 
other metal drums (1N1, 1N2), steel jerricans (3A1, 3A2), aluminum 
jerricans (3B1, 3B2), steel (4A), aluminum (4N) and other metal (4N) 
boxes are added to the list of authorized packagings.
Section 173.187
    Section 173.187 prescribes the packaging requirements for 
pyrophoric solids, metals or alloys, n.o.s. To provide greater 
flexibility in packaging selection, PHMSA is adding packaging

[[Page 1013]]

options to the list permitted for pyrophoric solids, metals or alloys, 
n.o.s. specified in paragraph (a) and (d) of this section. 
Specifically, steel, aluminum or other metal boxes (4A, 4B or 4N) are 
added to the list of authorized packagings in paragraph (a). In 
addition, steel, aluminum or other metal drums (1A1, 1A2, 1B1, 1B2, 1N1 
or 1N2) are added to the list of authorized packagings in paragraph 
(d).
Section 173.188
    Section 173.187 prescribes the packaging requirements for white and 
yellow phosphorus. To provide greater flexibility in packaging 
selection, steel, aluminum or other metal boxes (4A, 4B or 4N) are 
added to the list of authorized packagings in paragraph (a)(1). In 
addition, PHMSA is adding steel, aluminum or other metal drums (1A1, 
1B1 or 1N1) not over 250 L (66 gallons) capacity each and steel, 
aluminum or other metal drums (1A2, 1B2, or 1N2) not over 115 L (30 
gallons) capacity each, to the list of authorized packagings in 
paragraph (a)(2).
Section 173.189
    Section 173.189 prescribes the packaging and transport requirements 
for batteries containing sodium or cells containing sodium. To provide 
greater flexibility in packaging selection, PHMSA is adding 1N2, 4A, 
4B, 4N, 4H1, 3A2, 3B3 and 3H2 outer packagings to the list of 
authorized outer packagings in paragraph (b).
Section 173.193
    Section 173.193 prescribes the packaging requirements for 
bromoacetone, methyl bromide, chloropicrin and methyl bromide or methyl 
chloride mixtures. To provide greater flexibility in packaging 
selection, metal boxes (4A, 4B or 4N) are added to the list of 
authorized outer packagings in paragraph (a).
Section 173.194
    Section 173.194 prescribes the packaging requirements for gas 
identification sets. To provide greater flexibility in packaging 
selection, metal boxes (4A, 4B or 4N) are added to the list of 
authorized outer packagings in paragraphs (b)(1) and (b)(2).
Section 173.196
    Section 173.196 prescribes the packaging requirements for Category 
A infectious substances. To provide greater flexibility in packaging 
selection, PHMSA is adding drums (1A1, 1A2, 1B1, 1B2, 1N1, 1N2, 1H1, 
1H2, 1D, 1G); boxes (4A, 4B, 4N, 4C1, 4C2, 4D, 4F, 4G, 4H1, 4H2); or 
jerricans (3A1, 3A2, 3B1, 3B2, 3H1, 3H2) as examples of the types of 
authorized ``rigid outer packaging'' referenced in paragraph (a)(3).
Section 173.199
    Section 173.199 prescribes the packaging requirements for category 
B infectious substances. Paragraph (d) of this section provides the 
requirements for refrigerated or frozen specimens in ice, dry ice or 
liquid nitrogen. These provisions include the requirement to secure 
secondary packages.
    Consistent with an editorial amendment to Packing Instruction P650 
in the 17th Revised Edition of the UN Model Regulations, PHMSA is 
removing the language ``position after the ice or dry ice has 
dissipated'' from the requirements to secure secondary packages.
Section 173.201
    Section 173.201 prescribes the authorized non-bulk packagings for 
liquid hazardous materials in packing group I. To provide greater 
flexibility in packaging selection, PHMSA is adding ``Metal box other 
than steel or aluminum: 4N'' to authorized outer packagings of 
combination packagings listed in paragraph (b) of this section.
Section 173.202
    Section 173.202 prescribes the authorized non-bulk packagings for 
liquid hazardous materials in packing group II. To provide greater 
flexibility in packaging selection, PHMSA is adding ``Metal box other 
than steel or aluminum: 4N'' to the authorized outer packagings of 
combination packagings indicated in paragraph (b).
Section 173.203
    Section 173.203 prescribes the authorized non-bulk packagings for 
liquid hazardous materials in packing group III. To provide greater 
flexibility in packaging selection, PHMSA is adding ``Metal box other 
than steel or aluminum: 4N'' to the authorized outer packagings of 
combination packagings indicated in paragraph (b).
Section 173.211
    Section 173.211 prescribes the authorized non-bulk packagings for 
hazardous materials in packing group I. To provide greater flexibility 
in packaging selection, PHMSA is adding ``Metal box other than steel or 
aluminum: 4N'' to the authorized outer packagings of combination 
packagings indicated in paragraph (b) and the single packagings 
authorized in paragraph (c).
Section 173.212
    Section 173.212 prescribes the authorized non-bulk packagings for 
hazardous materials in packing group II. To provide greater flexibility 
in packaging selection, PHMSA is adding ``Metal box other than steel or 
aluminum: 4N'' to authorized outer packagings of combination packagings 
indicated in paragraph (b). Further, we are adding ``Metal box other 
than steel or aluminum: 4N'' and ``Metal box other than steel or 
aluminum with liner: 4N'' to authorized single packagings permitted in 
paragraph (c) of this section.
Section 173.213
    Section 173.213 prescribes the authorized non-bulk packagings for 
hazardous materials in packing group III. To provide greater 
flexibility in packaging selection, PHMSA is adding ``Metal box other 
than steel or aluminum: 4N'' to the authorized outer packagings of 
combination packagings indicated in paragraph (b). Further, we are 
adding ``Metal box other than steel or aluminum: 4N'' and ``Metal box 
other than steel or aluminum with liner: 4N'' to the single packagings 
authorized in paragraph (c).
Section 173.219
    Section 173.219 prescribes the transport conditions and packaging 
requirements for life saving appliances. Paragraph (b) of this section 
provides a list of hazardous materials that a life-saving appliance is 
permitted to contain as well as other transport requirements. 
Currently, the transport conditions specified in paragraph (b)(1) of 
this section specify that Division 2.2 compressed gases, including 
oxygen are permitted; however, oxygen generators are not. In this final 
rule, PHMSA is broadening the materials permitted in life-saving 
appliances by modifying paragraph (b)(1) to include liquefied gases as 
well.
    Paragraph (c) of this section prescribes the packaging requirements 
and exceptions provided for life saving appliances. Subsequent changes 
are proposed to paragraph (c)(1) of this section to reflect this 
inclusion of liquefied gases discussed previously. Furthermore, 
paragraph (c)(5) currently states that, for other than transportation 
by aircraft, life-saving appliances containing no hazardous materials 
other than carbon dioxide with a capacity not exceeding 100 cm\3\ are 
not subject to the provisions of this subchapter provided they are 
overpacked in rigid outer packagings with a maximum gross mass of 40 
kg. In this final rule, PHMSA is

[[Page 1014]]

revising the exception in (c)(5) by replacing the language ``carbon 
dioxide'' with ``cylinders of Division 2.2 compressed or liquefied 
gases with no subsidiary risk,'' and the quantity limit ``100 cm\3\'' 
with ``120 mL, installed solely for the purpose of activating the 
appliance.''
    In addition, we are further clarifying paragraph (c)(5) of this 
section by adding the statement, ``For transportation by aircraft, such 
appliances must be transported as cargo and may not be carried onboard 
an aircraft by passengers or crewmembers in carry-on baggage, checked 
baggage, or on their person unless specifically excepted by Sec.  
175.10.'' This clarification aligns the HMR with the recently adopted 
changes in the ICAO Technical Instructions regarding the air transport 
of life saving appliances that would otherwise be excepted from the 
HMR.
Section 173.220
    Section 173.220 prescribes packaging requirements for internal 
combustion engines, self-propelled vehicles, mechanical equipment 
containing internal combustion engines, battery-powered equipment or 
machinery, fuel cell-powered equipment or machinery. In this rule PHMSA 
is amending paragraph (d) to cross reference the IBR Sec.  171.7.
Section 173.221
    Section 173.221 prescribes the non-bulk packaging requirements for 
Polymeric beads (or granules), expandable, evolving flammable vapor and 
Plastic molding compound in dough, sheet or extruded rope form, 
evolving flammable vapor. PHMSA is adding the following packaging 
authorizations: metal (4A, 4B, or 4N), and plastic (4H1 or 4H2) drums, 
and 1N1, 1N2 drums in vapor tight metal or plastic jerricans (3A1, 3A2, 
3B1, 3B2, 3H1, or 3H2). PHMSA is also adding a paragraph to the section 
that reference the reader to a newly created Sec.  176.907 for cargo 
transport and hazard communication marking requirements for shipments 
of Polymeric beads expandable, evolving flammable vapor and Plastic 
molding compound in dough, sheet or extruded rope form, evolving 
flammable vapor when transported by vessel. These changes address the 
safety hazard presented by shipments of polymeric beads or plastic 
molding compounds off-gassing flammable vapors during vessel transport. 
See Section 176.907 for a detailed discussion of our addition of these 
vessel cargo transport requirements.
Section 173.225
    Section 173.225 prescribes the packaging requirements and other 
provisions for organic peroxides. Packaging requirements for organic 
peroxides are very specific and include requirements for the 
concentration by mass permitted, diluents percentage, water mass, 
temperature controls and organic peroxide specific packing methods.
    Paragraph (c) of this section contains and describes the organic 
peroxide table and how specific organic peroxides are to be 
transported. In addition, paragraph (e) contains a separate table that 
prescribes the packaging requirements for organic peroxides packaged in 
IBCs. As self-insulating hazardous materials, organic peroxides can 
pose different risks when transported in larger quantities. Thus, a 
separate table unique to the transport of these substances in IBCs is 
contained in the HMR. The ``Organic Peroxide IBC Table'' includes 
maximum quantities permitted to be packaged and any temperature and 
emergency controls.
    The organic peroxides tables in paragraphs (c) and (e) specify by 
technical name those organic peroxides that are authorized for 
transportation and not subject to the approval provisions of Sec.  
173.128. An organic peroxide identified by technical name is authorized 
for transportation only if it conforms to all applicable provisions of 
these tables. In this final rule, we are amending the Organic Peroxides 
Tables in Sec.  173.225 by adding new entries and revising current 
entries to account for new organic peroxides and formulations that are 
commercially available.
    The following entries are added in the Sec.  173.225(c) organic 
peroxides table:

UN3106, ``([3R-(3R,5aS,6S,8aS,9R,10R,12S,12aR**)]-Decahydro-10methoxy-
3,6,9-trimethyl-3,12-epoxy-12H-pyrano[4,3-j]-1,2-benzodioxepin)''
UN3110, ``3,6,9-Triethyl-3,6,9-trimethyl-1,4,7-triperoxonane''
UN3119, ``Di-(3,5,5-trimethylhexanoyl) peroxide''

    The following current entries in the Sec.  173.225(c) organic 
peroxides table are amended:

UN3115, ``Diisopropyl peroxydicarbonate''
UN3115, ``Di-(3,5,5-trimethylhexanoyl) peroxide''

    The following entries are added to the Sec.  173.225(e) Organic 
Peroxide IBC Table:

UN3119 ``Diisobutyryl peroxide, not more than 28% as a stable 
dispersion in water''
UN3119, ``Diisobutyryl peroxide, not more than 42% as a stable 
dispersion in water''

    The following entries are amended in the Sec.  173.225(e) Organic 
Peroxide IBC Table:

UN3119 ``Di-(3,5,5-trimethylhexanoyl) peroxide, not more than 38% in 
diluent type A''
UN3119 ``1,1,3,3-Tetramethylbutyl peroxyneodecanoate, not more than 
52%, stable dispersion, in water''
Section 173.226
    Section 173.226 prescribes the packaging requirements for Materials 
poisonous by inhalation, Division 6.1, Packing Group I, Hazard Zone A. 
Specifically, this section authorizes the transport of Materials 
poisonous by inhalation, Division 6.1, Packing Group I, Hazard Zone A 
in specification cylinders, specification drums packaged further in 
specification drums and combination packages. PHMSA is revising the 
requirements of paragraph (c) by adding an authorization to package 
such materials in ``Metal box other than steel or aluminum: 4N'' drums. 
In addition, PHMSA is correcting an editorial error by replacing the 
incorrect wording ``Expanded plastic box: 4H2'' with the correct 
wording ``Expanded plastic box: 4H1.''
Section 173.230
    Section 173.230 prescribes the transport requirements for fuel cell 
cartridges containing hazardous material. Paragraph (e) of this section 
prescribes the packaging requirements for fuel cell cartridges 
containing hazardous material. Furthermore, paragraph (e)(2)(ii) notes 
that ``Fuel cell cartridges contained in equipment must be protected 
against short circuits and the entire fuel cell system must be 
protected from unintentional activation. The equipment must be securely 
cushioned in the outer packaging.'' As currently stated in the HMR, 
this requirement may imply that only fuel cell cartridges contained in 
equipment, not the fuel cell system, would have to be protected against 
short circuits. This is not the intent of this requirement. Therefore, 
PHMSA is clarifying that the entire fuel cell system must be protected 
against short circuits and unintentional activation.
Section 173.240
    Section 173.240 prescribes the bulk packagings authorized for 
certain low hazard solid materials. As discussed previously, PHMSA is 
adopting flexible bulk container provisions throughout the HMR.

[[Page 1015]]

    In this section, PHMSA is adding paragraph (f) that authorizes the 
use of FBCs for certain low hazard solid materials. Specifically, 
paragraph (f) permits the use of FBCs if B120 is indicated in Column 
(7) of the specific entry in Sec.  172.101 HMT and the FBC conforms to 
the requirements in subparts R and S of part 178 of the HMR. 
Furthermore, paragraph (f) notes that FBCs may not be used for Packing 
Group I or II hazardous materials. Only select low hazard solid 
materials are authorized for transport in FBCs. The use of FBCs for the 
transportation of an HMT entry not assigned special provision B120 is 
prohibited.
Section 173.301b
    Section 173.301b provides additional general requirements for 
shipment of UN pressure receptacles. Recent international adoption of 
this standard leads PHMSAto incorporate by reference ISO 13340:2001(E) 
Transportable gas cylinders--Cylinder valves for non-refillable 
cylinders--Specification and prototype testing, First edition, 2004-04-
01, and require all non-refillable UN pressure receptacle valves to be 
in compliance with this standard.
Section 173.306
    Section 173.306 prescribes the exceptions for limited quantities of 
compressed gases including aerosols. Paragraph (a) of this section 
prescribes the general requirements for limited quantities of 
compressed gases while paragraph (j) specifically addresses aerosols 
and receptacles small, containing gas, with a capacity of less than 50 
mL.
    In this final rule, we are revising paragraph (j) to note that 
aerosols conforming to this paragraph, when offered for transportation 
by air, must be transported as cargo and may not be carried onboard an 
aircraft by passengers or crewmembers in carry-on baggage, checked 
baggage, or on their person unless specifically excepted by Sec.  
175.10. This clarification aligns the HMR with the previously discussed 
changes adopted in the ICAO Technical Instructions regarding the air 
transport of aerosols that are otherwise excepted from the HMR.
Section 173.313
    Section 173.313 contains instructions for UN portable tanks and the 
table for liquefied compressed gases. The UN Portable Tank Table for 
Liquefied Compressed Gases is referenced in Sec.  172.102(c)(7)(iii) of 
the HMR for portable tanks used to transport liquefied compressed 
gases.
    Chemical manufacturers throughout the world are currently supplying 
pressurized products contained and transported in gas cylinders. The 
products are liquids or solids such as adhesives, coatings and cleaners 
combined with a gas or gas mixtures in pressure receptacles under 
sufficient pressure to expel the contents. These mixtures are typically 
expelled from the pressurized receptacles as foams, streams or thick 
sprays. Under the current HMR these types of products are classified as 
liquefied gases and transported in accordance with the applicable 
sections for the liquefied gases in which they are classified. A 
typical product however is a combination of a propellant (gas phase) 
and a liquid or solid component, and therefore the term liquefied gas 
does not correctly reflect the contents. As they are not filled in 
aerosol dispensers and as the receptacles used exceed the volume 
limitations for aerosols, they may not be transported as aerosols. The 
United Nations Sub-Committee of experts on the Transportation of 
Dangerous goods agreed to create new entries (UN numbers) for these 
products to address their unique characteristics and corresponding 
regulations to address the safe transport of such materials.
    In this final rule, we are adopting entries in the HMT for various 
chemicals under pressure and the corresponding packaging provisions. We 
are modifying Sec.  173.313 to include the packaging requirements for 
chemicals under pressure transported in portable tanks. Specifically, 
we are revising the section title, introductory test, and table name to 
reflect that chemicals under pressure are addressed in this section. We 
are also adding table entries for identification numbers UN3500, 
UN3501, UN3502, UN3503, UN3504 and UN3505. Lastly, we are correcting 
the maximum filling density for UN3220.
    The addition of packaging requirements specific to chemicals under 
pressure will ensure that an appropriate level of safety is achieved 
for these unique materials. PHMSA participated in, and concurs with, 
the discussions and decisions regarding the packagings selected for 
these materials. The packagings adopted by the UN, ICAO and IMO provide 
an appropriate level of safety for these materials and, thus, PHMSA is 
adopting similar packagings in the HMR. Furthermore, aligning with 
international packaging standards facilitates the movement of these 
materials both domestically and internationally.
Section 173.316
    Section 173.316 provides the requirements for cryogenic liquids 
contained in cylinders. Specifically, the HMR requires each cylinder 
containing cryogenic liquids be equipped with one or more pressure 
relief devices.
    PHMSA is revising Sec.  173.316, ``Cryogenic Liquids in Cylinders'' 
to include a requirement consistent with the UN Model Regulations that 
all pressure relief device inlets must under maximum filling conditions 
be situated in the vapor space of the closed cryogenic receptacle and 
the devices must be so arranged as to ensure that the escaping vapor is 
discharged unobstructed.
    This requirement will enhance safety by assisting in the proper 
function of the pressure release devices. Further, it will prevent 
unsafe conditions in transport if the liquid form of the gas were 
released through the pressure release device. For instance, if the gas 
released is a Division 2.1 (flammable) gas or a Division 2.3 
(poisonous) gas, it will reduce the opportunity for the released liquid 
form of the gas to create an asphyxiant environment through the rapid 
displacement of the normal concentration of oxygen in the breathable 
atmosphere. Finally, it will reduce the potential of released cryogenic 
oxygen in liquid form to create an oxygen enriched atmosphere that may 
explosively combust.
Section 173.318
    Section 173.318 provides the requirements for cryogenic liquids 
contained in cargo tanks. Specifically, the HMR requires each cargo 
tank containing cryogenic liquids be equipped with one or more pressure 
relief devices.
    PHMSA is revising Sec.  173.318, ``Cryogenic Liquids in Cargo 
Tanks'' to include a requirement consistent with the UN Model 
Regulations that all pressure relief device inlets must under maximum 
filling conditions be situated in the vapor space of the closed 
cryogenic receptacle and the devices be so arranged as to ensure that 
the escaping vapor is discharged unobstructed.
    This requirement will enhance safety by assisting in the proper 
function of the pressure release devices. Further, it will prevent 
unsafe conditions in transport if the liquid form of the gas were 
released through the pressure release device. For instance, if the gas 
released is a Division 2.1 (flammable) gas or a Division 2.3 
(poisonous) gas, it would reduce the opportunity for the released 
liquid form of the gas to create an asphyxiant

[[Page 1016]]

environment through the rapid displacement of the normal concentration 
of oxygen in the breathable atmosphere. Finally it will reduce the 
chance of released cryogenic oxygen in liquid form creating an oxygen 
enriched atmosphere that may explosively combust.
Section 173.335
    Section 173.335 is created to provide packaging requirements for 
new HMT entries ``Chemical under pressure n.o.s.'' Specifically, PHMSA 
is adopting transport requirements, filling limits, minimum service 
pressure, and periodic inspection requirements for cylinders utilized 
for shipments of chemical under pressure n.o.s.
    Cylinders used to ship chemical under pressure n.o.s. must be 
authorized UN or DOT cylinders for the propellant and otherwise conform 
to the applicable requirements of subpart G of part 173. 3M noted in 
their comments to the August 15, 2012 NPRM that while PHMSA created a 
section that included filling limits for cylinders containing chemical 
under pressure, we did not increase the water capacity for non-
refillable UN pressure receptacles filled with chemical under pressure 
classed as flammable or toxic. In Sec.  173.301b non-refillable 
cylinders containing a flammable or a toxic gas are limited to 1.25 
liters. The UN authorizes non-refillable cylinders with a capacity up 
to 50 liters when it contains a chemical under pressure. In this final 
rule we will revise Sec. Sec.  173.301b and 173.302a to increase the 
maximum allowable water capacity for non-refillable cylinders 
containing chemical under pressure to 50 liters (3050 in3).
Section 173.340
    Section 173.340 prescribes the packaging requirements for NA1693, 
tear gas devices. PHMSA is revising the packaging requirements in 
paragraphs (c) and (d) by authorizing the use of 4A, 4B, or 4N metal 
boxes, and 1B2, 1N2, or 1H2 drums.

Part 175

Section 175.8
    Section 175.8 provides exceptions from certain regulations for air 
carrier operator equipment and items of replacement. ICAO amended the 
Technical Instructions applicable to exceptions from certain 
regulations for air carrier operator equipment and items of 
replacement, and to better reflect items that may be sold as part of 
duty free services. PHMSA is revising paragraph (b)(2) of this section 
to add portable electronic devices containing lithium batteries to the 
list of items permitted aboard an aircraft for use or sale on that 
specific aircraft.
Section 175.10
    Section 175.10 specifies the conditions for which passengers, crew 
members, or an operator may carry hazardous materials aboard an 
aircraft. Consistent with revisions to the ICAO Technical Instructions, 
in this final rule, PHMSA is revising paragraph (a)(14), the conditions 
under which electrically powered heat-producing articles may be carried 
aboard an aircraft. The requirement that the heat-producing component, 
or the energy source, must be removed to prevent unintentional 
functioning during transport is being revised to permit the removal of 
another component, such as a fuse, to prevent unintentional functioning 
during transport. In addition the paragraph is being revised to specify 
procedures for protecting any removed battery from short circuit during 
transport. PHMSA is also adding paragraphs (a)(20), (a)(21), (a)(22), 
(a)(23), and (a)(24) to specify conditions under which permeation 
devices for calibrating air quality monitoring equipment, internal 
combustion or fuel cell engines, non-infectious specimens, insulated 
packagings containing refrigerated liquid nitrogen, and small 
compressed gas cartridges fitted into devices, respectively, may be 
carried aboard an aircraft.
    PHMSA received one comment from the FCHEA requesting that we amend 
Sec.  175.10(a)(19) to allow fuel cell cartridges containing flammable 
gas in Division 2.1 and fuel cells containing water reactive materials 
in Division 4.3 in checked passenger baggage. PHMSA did not propose 
changes to the provisions allowing for the checking of limited types of 
fuel cells in the NPRM, and consider this request to be outside the 
scope of this rulemaking.
    PRBA noted in their comments to the NPRM that the 2013-2014 ICAO 
Technical Instructions contain a provision that authorizes passengers 
to carry portable medical electronic devices aboard passenger aircraft 
with lithium metal batteries containing up to 8 grams of lithium metal. 
While this amendment should be added to the HMR it was not included in 
the August 15, 2012 NPRM and the public has not been provided notice of 
any intent to add a new exception for lithium battery-containing 
portable medical devices in Sec.  175.10 or afforded the opportunity to 
provide us with written data, views, or arguments to aid our decision. 
As the FAA Modernization and Reform Act of 2012 requires harmonization 
in this instance, we will propose to adopt this exception in a future 
rulemaking.

Part 176

Section 176.2
    Section 176.2 provides definitions of terms specifically as they 
pertain to Part 176. In this final rule, PHMSA is adopting various 
revisions to the vessel stowage and segregation requirements specified 
in Part 176. As part of these changes certain terminology must be 
defined.
    The term ``Closed cargo transport unit for Class 1'' is defined by 
the IMDG Code as a freight container or transport vehicle that fully 
encloses the contents by permanent structures and can be secured to the 
ship's structure and are, except for the carriage of division 1.4 
explosives, structurally serviceable (see Sec.  176.172). Portable 
magazines conforming to Sec.  176.137 are also considered closed cargo 
transport units for Class 1. Small compartments such as deck houses and 
mast lockers are included. Cargo transport units with fabric sides or 
tops are not closed cargo transport units. The floor of any closed 
cargo transport unit must either be constructed of wood, close-boarded 
or so arranged that goods are stowed on sparred gratings, wooden 
pallets or dunnage. The IMO adopted this new definition for ``closed 
cargo transport unit for Class 1'' to define the characteristics 
required for cargo transport units carrying explosives by vessel.
    A new definition for ``potential or possible sources of ignition'' 
was adopted by the IMO for incorporation in the next published IMDG 
Code. The term ``Potential or possible sources of ignition'' as defined 
in the IMDG Code ``means but is not limited to, open fires, machinery 
exhausts, galley uptakes, electrical outlets and electrical equipment 
including those on refrigerated or heated cargo transport units unless 
they are of certified safe type.'' The text ``means but is not limited 
to'' indicates that the list of potential or possible sources of 
ignition is not all inclusive; as it is impossible to identify in a 
definition all potential or possible sources of ignition that may exist 
on a variety of vessels with various engineering designs and stowage 
configurations. PHMSA is adopting a definition for ``Potential or 
possible sources of ignition'' that replaces ``of certified safe type'' 
with ``designed to operate in a hazardous environment.'' This change is 
due to some ambiguity as to what is considered a certified safe type of 
refrigerated or heated cargo transport unit. Adoption of this

[[Page 1017]]

definition will provide guidance to vessel stowage planners in 
determining safe stowage locations for cargo on board vessels.
    The term ``Protected from sources of heat'' as defined by the IMDG 
Code means ``that packages and cargo transport units must be stowed at 
least 2.4 m from heated ship structures, where the surface temperature 
is liable to exceed 131 [deg]F (55 [deg]C). Examples of heated 
structures are steam pipes, heating coils, top or side walls of heated 
fuel and cargo tanks, and bulkheads of machinery spaces. In addition, 
packages not loaded inside a cargo transport unit and stowed on deck 
must be shaded from direct sunlight. The surface of a cargo transport 
unit can heat rapidly when in direct sunlight in nearly windless 
conditions and the cargo may also become heated. Depending on the 
nature of the goods in the cargo transport unit and the planned voyage 
precautions must be taken to ensure that exposure to direct sunlight is 
reduced''. This definition was adopted by the IMO for inclusion in the 
next IMDG Code to provide a list of possible sources of heat a cargo 
transport unit might encounter during vessel transport. This definition 
also includes requirements for break bulk packages stowed on deck that 
are required to be protected from sources of heat by means of a stowage 
provision or a general stowage requirement found in Part 176.
    PHMSA received one comment from IVODGA concerning the proposed 
definition of ``protected from sources of heat.'' IVODGA suggested that 
at the end of the new definition for ``protected from sources of heat'' 
we include that ``* * * containers should not be stowed in the upper 
most tier position when this is required, which does not include tank 
units that have protective insulation shields'' since the new 
definition seems to bridge the older shade from radiant heat and other 
heat related factors onboard vessels. PHMSA does not see the need to be 
more specific and restrictive than the internationally accepted 
definition calls for and is maintaining the definition of protected 
from sources of heat as proposed in the NPRM.
    Therefore, in this final rule, PHMSA is adding definitions in this 
section for the terms, ``Closed cargo transport unit for Class 1,'' 
``Potential or possible sources of ignition'' and ``Protected from 
sources of heat'' with additional text clarifying that a portable 
magazine conforming to Sec.  176.137 is also considered ``closed cargo 
transport unit for Class 1.''
Section 176.63
    Section 176.63 prescribes supplementary requirements with respect 
to the stowage of specific hazardous materials in addition to those 
authorized in the HMT in Sec.  172.101. This section sets forth the 
basic physical requirements for the authorized vessel stowage 
locations.
    One commenter (SAAMI) noted that limited quantity shipments are 
assigned the least restrictive stowage category and are excepted from 
additional stowage provisions in 3.4.3 of the IMDG Code and requested 
that PHMSA do the same. PHMSA agrees and is revising paragraph (a) of 
this section to allocate stowage category A to hazardous materials 
offered as limited quantities, and to except these shipments from the 
other stowage provisions assigned in column 10B of the HMT for 
shipments of limited quantities.
    PHMSA is also revising paragraph (b) of this section by replacing 
the phrase ``shade from radiant heat'' with the phrase ``protected from 
sources of heat.'' This revision of terminology is necessary to 
incorporate other changes to the vessel stowage codes in Column 10 B of 
the HMT.
    PHMSA is also revising paragraph (e) of this section to remove 
references to magazine stowage type A and C, as the definition of 
``closed cargo transport unit for Class 1'' was added to Sec.  176.2 
references to magazine stowage type A and C are no longer needed in 
this section.
    Paragraph (e) also contains an exception for empty packages 
containing residue (excluding Class 2.3 empty packages containing 
residue and waste aerosols), including IBCs and large packages to be 
stowed on deck, or under deck if in a mechanically ventilated cargo 
space. This exception will apply regardless of the stowage provisions 
indicated in Sec.  172.101(k). PHMSA believes the reduced hazard 
present in empty packages containing residue combined with the 
mechanically ventilated cargo space warrants a relaxation of stowage 
requirements for shipments of empty packages (excluding Class 2.3 and 
waste aerosols) that otherwise would require on deck stowage.
Section 176.76
    Section 176.76 specifies the requirements for transport vehicles, 
freight containers, and portable tanks containing hazardous materials 
transported via vessel.
    In this final rule, PHMSA is adding a new paragraph (a)(11) 
requiring that banding or securing straps used to secure packages must 
not be over tightened to cause damage or deformation of the packages or 
the securing points within the freight container or transport vehicle. 
PHMSA is adopting this change to harmonize cargo securement 
requirements in the HMR with recently adopted changes in the IMDG Code. 
This requirement is intended to prevent undue stress and potential 
damage to packages and tie down points during transport.
    PHMSA had originally proposed to replace the existing paragraph 
(a)(9) with this regulatory text, but received one comment from IVODGA 
noting that the provisions of (a)(9) concerning security devices is 
still necessary, and a request to maintain the current text of (a)(9) 
and simply insert a new paragraph with the proposed text. PHMSA agrees 
and is maintaining the current paragraph (a)(9). IVODGA also requested 
that the following text be included at the end of the newly proposed 
paragraph of our proposed text: ``* * * or transport vehicle. The 
Maximum Securing Load on internal container lashing, securing or anchor 
points shall not be exceeded.'' PHMSA believes that inserting IVODGA's 
proposal would be very difficult to enforce, as anchor points in 
containers are not marked with maximum securing loads. Additionally 
PHMSA believes that the language proposed in the NPRM accounts for 
IVODGA's concerns as deformation of the securing points is indicative 
of exceeding the securing points capabilities.
    PHMSA received an additional comment from IVODGA requesting we 
amend Sec.  176.76 to require transport equipment with refrigerated or 
heating units used for the transport of hazardous materials of Division 
2.1, Class 3, or those capable of releasing flammable vapors during 
transport to be equipped with explosion proof electrical fittings. 
PHMSA has determined that such an amendment is beyond the scope of the 
proposals presented in the August 15, 2012 NPRM and therefore will not 
be addressed in this final rule.
Section 176.83
    Section 176.83 prescribes the general vessel segregation 
requirements. Paragraph (m) of this section specifies additional 
segregation requirements for certain groups of hazardous materials. 
Paragraph (m)(2) of this section prescribes segregation requirements 
for materials shipped under n.o.s. entries. Furthermore, paragraph 
(m)(3) discusses materials that fall outside the defining criteria for 
hazardous materials, but display chemical properties similar to

[[Page 1018]]

hazardous materials listed in segregation groups.
    In this final rule, PHMSA is revising paragraph (m)(2) to clarify 
that the offeror of hazardous materials is responsible for deciding if 
allocation of a segregation group is appropriate. We are also revising 
paragraph (m)(3) to clarify that the offer of hazardous materials for 
transportation or the person packing the cargo transport unit is 
responsible for identifying a relevant segregation group and applying 
the segregation requirements for that segregation group. These 
revisions will replace the current term ``shipper,'' which is not 
defined in Sec.  171.8, with the terms ``offeror'' and ``person who 
offers'' which are defined terms in Sec.  171.8.
Section 176.84
    Section 176.84 prescribes the meanings and requirements for 
numbered or alpha-numeric stowage provisions for vessel shipments 
listed in column 10B of the Sec.  172.101 Hazardous Materials Table. 
The provisions in Sec.  176.84 are broken down into general stowage 
provisions whose meanings are defined in the ``table of provisions'' in 
paragraph (b), and the stowage provisions applicable to vessel 
shipments of Class 1 explosives defined in the table to paragraph 
(c)(2).
    PHMSA is revising stowage provisions 25 and 128 and deleting 
stowage provisions 19, 48, and 50 from the table in paragraph (b). 
Stowage provision 25 is revised from ``Shade from radiant heat'' to 
read ``Protected from sources of heat.'' Stowage provision 128 is 
revised from ``Stow in accordance with the IMDG Code, Sub-section 
7.1.10.3 (incorporated by reference; see Sec.  171.7 of this 
subchapter)'' to read ``Stow in accordance with the IMDG Code, Sub-
section 7.6.2.7.2 (incorporated by reference; see Sec.  171.7 of this 
subchapter).'' Deleted stowage provision 19 previously read ``Protect 
from sparks and open flames.'' Deleted stowage provision 48 previously 
read ``Stow ``away from'' sources of heat''. Deleted stowage provision 
50 previously read ``Stow ``away from'' sources of heat where 
temperatures in excess of 55 [deg]C (131 [deg]F) for a period of 24 
hours or more will be encountered.''
    The current stowage provision table in paragraph (b) contains three 
listings requiring shipments to be either shaded or stowed away from 
sources of heat. The addition of a standard definition for ``protected 
from sources of heat'' to the list of definitions in Sec.  176.2 has 
rendered stowage provisions 19, 48, and 50 redundant and all HMT 
listings previously assigned stowage provisions 19 or 48 have been 
assigned the revised stowage provision 25. Furthermore, no listings in 
the current HMR are assigned stowage provision 50; therefore, we are 
deleting it and all references to it. The change to stowage provision 
128 will account for a citation change in the newest edition of the 
IMDG Code.
    In this final rule, PHMSA is revising explosive stowage provision 
26E and deleting explosive stowage provisions 7E, 8E, and 20E from the 
table in paragraph (c)(2). Deleted explosive stowage provision 7E 
previously read ``Stowage category ``04'' for projectiles or cartridges 
for guns, cannons or mortars; Stowage category ``08'' for other 
types.'' Deleted explosive stowage provision 8E previously read ``When 
under deck, special stowage is required.'' Deleted explosive stowage 
provision 20E previously read ``Stowage category ``03'' for projectiles 
or cartridges for guns, cannons or mortars; Stowage category ``07'' for 
other types; magazines must be of steel construction that prevents 
leakage.'' Changes to explosive stowage provisions 7E, 8E, and 20E are 
necessary to account for revisions to the stowage category definitions 
proposed in Sec.  172.101(k). Additionally, as a result of the removal 
of stowage provisions 10 and 13 from Sec.  172.101(k), PHMSA is 
revising explosive stowage provision 26E in Sec.  176.84. Please see 
section 172.101 for explosive stowage codes associated with HMT entries 
previously assigned these explosive stowage provisions and a list of 
entries these provisions have been removed from.
Section 176.116
    Section 176.116 prescribes the general stowage conditions for Class 
1 explosive materials. Paragraph (a) of this section prescribes 
explosive stowage requirements, which take into account heat and 
sources of ignition. Paragraph (f) of this section prescribes 
explosives stowage requirements for under deck storage. PHMSA is 
revising paragraph (a) to clarify the general stowage conditions for 
Class 1 materials on board vessels and deleting and reserving paragraph 
(f).
    PHMSA is revising paragraph (a)(1) to require explosive materials 
to be stowed in a cool part of the ship, to be kept as cool as 
practicable while on board, and to be stowed as far away as practicable 
from any potential source of heat or ignition. This change is due to 
the inclusion of a definition for ``potential source of heat or 
ignition'' in Sec.  176.2. A new paragraph (a)(2) is added requiring 
Class 1 materials to be stowed away from the side of a ship's side at a 
distance at least equal to one eighth of the beam of the vessel or 2.4 
m (8 feet), whichever is less. PHMSA received one comment (IVODGA) 
requesting an exception for materials within Class 1 of low or 
relatively low hazard within division 1.4 through 1.6 and the allowance 
to transport these in all positions available on-deck. In 7.1.4.4.3 of 
the IMDG goods of division 1.4 are excepted from the requirement to be 
stowed away from the side of a ship. Another comment by Horizon also 
noted that 1.4 cargos should be excluded from this requirement. PHMSA 
agrees to provide such an exception for goods of division 1.4, but sees 
no need to extend the exception beyond what is authorized by the 
international standard.
    This minimum distance for explosive shipment stowage from the 
ship's side is adopted to harmonize with a recent change in the IMDG 
Code and provides an increased level of safety by ensuring explosive 
shipments are not stowed adjacent to the ships internal structure.
    Paragraph (f) previously indicated general stowage provisions for 
HMT explosive entries stowed under deck and assigned stowage category 
09 or 10. The removal of stowage category 09 and 10 make these 
provisions no longer applicable.
Section 176.128
    Section 176.128 defines the varying levels of containment for 
explosives identified as magazine stowage types ``A'', ``C,'' and 
``Special Stowage.'' The IMO has determined that a distinction between 
closed cargo transport units and magazines is no longer necessary. 
PHMSA concurs with the IMO on this issue and is deleting Sec.  176.128 
and reserving it for future use. With the addition of a definition for 
``closed cargo transport unit for Class 1,'' and the requirement for 
all explosive shipments to be stored at a distance at least equal to 
one eighth of the beam of the vessel or 2.4 m (8 feet), whichever is 
less, specific requirements for type A, C, and special magazine stowage 
are now unnecessary. Note that portable magazines remain authorized by 
Sec.  176.137 and the definition of ``closed cargo transport unit for 
Class 1.''
Section 176.130
    Section 176.130 prescribes requirements for magazine stowage type 
A. The IMO determined that a distinction between closed cargo transport 
units and magazines is no longer necessary. PHMSA concurs with the IMO 
on this issue and is deleting Sec.  176.130 and reserving it for future 
use. In general, a magazine is equivalent to a closed cargo transport 
unit with a

[[Page 1019]]

wooden floor. Properly packaged and transported packages in a closed 
cargo transport unit will adequately address safety concerns presented 
by commodities previously required to be transported in magazine 
stowage type A.
Section 176.133
    Section 176.133 prescribes requirements for magazine stowage type 
C. The IMO has determined that all explosive shipments must be stored 
at a distance at least equal to one eighth of the beam of the vessel or 
2.4 m (8 feet), whichever is less, thus making the provisions for 
magazine stowage type C unnecessary. PHMSA concurs with the IMO on this 
issue and is deleting Sec.  176.133 and reserving it for future use.
Section 176.134
    Section 176.134 prescribes requirements for vehicles carrying Class 
1 materials requiring magazine stowage. The removal of magazine stowage 
definitions and provisions make this section unnecessary. Therefore, 
PHMSA is deleting this section and reserving it for future use.
Section 176.136
    Section 176.136 prescribes requirements for special stowage of 
Class 1 materials. Changes to vessel stowage location codes in Sec.  
172.101(k) and the assignment of vessel stowage codes requiring on deck 
stowage for entries previously authorized as special stowage make this 
section unnecessary. Therefore, PHMSA is deleting this section and 
reserving it for future use.
Section 176.138
    Section 176.138 prescribes general requirements for on deck 
stowage. Paragraph (b) provides general requirements for on deck 
stowage of explosives. In this final rule, PHMSA is revising this 
section to require explosives to not be stowed within 6 m (20 feet) of 
the newly defined term ``any potential sources of heat or ignition.'' 
This change is adopted to incorporate a newly defined term in Sec.  
176.2. PHMSA received one comment from IVODGA requesting an editorial 
clarification to separate the proposed language into ``from any source 
of heat and any possible sources of ignition'' and is making the 
requested change.
Section 176.144
    Section 176.144 prescribes segregation requirements for Class 1 
materials transported by vessel. Paragraph (d) allows materials 
requiring ordinary stowage (non-magazine stowage) to be stowed in the 
same magazine as materials requiring magazine stowage. PHMSA is 
revising paragraph (d) to state that if part of a shipment requires 
non-metallic lining of closed cargo transport units, Class 1 materials 
requiring ordinary stowage (stowage not requiring non-metallic lining 
of closed cargo transport units) may be stowed in the same closed cargo 
transport unit provided there are no exposed parts of any ferrous metal 
or aluminum alloy, unless separated by a partition. The removal of 
sections and requirements for magazine stowage necessitates the change 
in this section.
    During the review of the NPRM PHMSA noted that Table 176.144(a) 
includes a reference to explosives requiring special stowage in Note: 
1. This final rule removes the special stowage section in the HMR. 
Therefore, PHMSA is removing the reference to special stowage in Note 1 
of Table 176.144(a).
Section 176.146
    Section 176.146 prescribes segregation requirements for Class 1 
materials and non-hazardous goods transported by vessel. Paragraph (a) 
currently states that Class 1 material need not be segregated from non-
hazardous materials except as provided in paragraphs (b) and (c). 
Paragraph (b) then goes on to state that certain cargo (mail, baggage, 
and personal effects) may not be stowed in the same compartment as, or 
in compartments immediately above or below, Class 1 (explosive) 
materials other than those in compatibility group S. Paragraph (c) 
states that where Class 1 (explosive) materials are stowed against an 
intervening bulkhead, any mail on the other side of the bulkhead must 
be stowed away from it.
    In this final rule, PHMSA is revising paragraphs (a) and (b) and 
deleting and reserving paragraph (c). Specifically, we are revising 
paragraph (a) to remove a reference to the removed paragraph (c). We 
are also revising paragraph (b) to read ``readily combustible materials 
may not be stowed in the same compartment or hold as Class 1 
(explosive) materials other than those in compatibility group S.'' This 
change incorporates the adoption by IMO of the defined term ``readily 
combustible material'' in 176.2. In this final rule, PHMSA is removing 
and reserving paragraph (c) as the vast majority of mail is now sent by 
air and not vessel. A specific requirement for stowage of mail away 
from the intervening bulkhead between it and Class 1 materials is 
deemed unnecessary.
Section 176.170
    Section 176.170 prescribes requirements for shipments of Class 1 
materials in freight containers by vessel. Paragraph (a) states that 
when Class 1 materials are stowed in a freight container, the freight 
container, for the purposes of this subpart, may be regarded as a 
magazine but not as a separate compartment. Paragraph (c) states that 
freight containers used to transport Class 1 (explosive) materials for 
which magazine stowage type A is required must have a floor consisting 
of tightly fitted wooden boards, plywood or equivalent non-metallic 
material, and a non-metallic lining.
    PHMSA is amending paragraph (a) and deleting and reserving 
paragraph (c). Paragraph (a) is revised to state that when Class 1 
materials are stowed in a freight container, the freight container, for 
the purposes of this subpart G of Part 176, may be regarded as a closed 
transport unit for Class 1 or a magazine but not a separate 
compartment. This change is being made to incorporate the definition of 
``closed cargo transport unit for Class 1'' and the removal of magazine 
stowage A, C, and Special Stowage. Paragraph (c) references freight 
containers used to transport Class 1 (explosive) materials for which 
magazine stowage type A is required. The removal of a definition for 
and requirements for magazine stowage type A make this paragraph 
unnecessary.
Section 176.200
    Section 176.200 prescribes general stowage requirements for Class 2 
materials transported by vessel. Paragraph (c) of this section 
prescribes the orientation and outer packaging requirements for 
cylinders transported by vessel.
    PHMSA is revising paragraph (c) to clarify that cylinders offered 
for transport by vessel in a vertical position must be stowed in either 
a block and cribbed or boxed-in with suitable sound lumber. PHMSA is 
also replacing the word movement with shifting in the requirement for 
the crib or box bracing to prevent any movement. These revisions are to 
harmonize with vessel transportation requirements incorporated in the 
IMDG Code and clarify that cylinders stored in a vertical position must 
be adequately blocked and braced using sound lumber.
Section 176.210
    Section 176.210 prescribes on deck stowage requirements for 
cylinders transported by vessel. This section currently requires 
cylinders of Class 2 materials being transported by vessel to

[[Page 1020]]

be protected from radiant heat, including the direct rays of the sun, 
by structural erections or awnings.
    In this final rule, PHMSA is revising this section by replacing 
``protected from radiant heat, including the direct rays of the sun, by 
structural erections or awnings'' with the newly defined term 
``protected from sources of heat.''
Section 176.230
    Section 176.230 prescribes stowage requirements for Division 2.1 
materials transported by vessel. Currently the HMR requires Division 
2.1 materials transported in Specification 106A or 110A multi-unit car 
tanks must be stowed on deck only, and must be shaded from radiant 
heat.
    In this final rule, PHMSA is replacing the phrase ``shaded from 
radiant heat'' with the newly defined ``protected from sources of 
heat.''
Section 176.305
    Section 176.305 prescribes stowage requirements for Class 3 
materials transported by vessel. Paragraph (a) states that Class 3 
flammable or combustible liquids must be kept as cool as reasonably 
practicable and be stowed away from all sources of heat and ignition.
    In this final rule, PHMSA is revising paragraph (a) to read ``a 
Class 3 (flammable) or combustible liquid must be kept as cool as 
reasonably practicable, protected from sources of heat, and away from 
potential sources of ignition.'' These changes incorporate the 
definitions of ``protected from sources of heat'' and ``potential or 
possible sources of ignition.''
Section 176.400
    Section 176.400 prescribes stowage requirements for Division 1.5, 
Class 4 (flammable solids) and Class 5 materials transported by vessel. 
Paragraph (a) requires Class 4 (flammable solid) material and Division 
5.2 (organic peroxide) materials to be kept as cool as reasonably 
practicable and be stowed away from all sources of heat and ignition.
    PHMSA is revising paragraph (a) to read ``Class 4 (flammable solid) 
material and Division 5.2 (organic peroxide) material must be kept as 
cool as reasonably practicable, protected from sources of heat, and 
away from potential sources of ignition.'' These changes incorporate 
the definitions of ``protected from sources of heat'' and ``potential 
or possible sources of ignition.''
    Paragraph (b) of this section requires Division 5.2 (organic 
peroxide) material to be stowed away from living quarters or access to 
them. Division 5.2 (organic peroxide) substances not requiring 
temperature control should be protected from radiant heat, which 
includes direct rays of the sun, and stowed in a cool, well-ventilated 
area.
    PHMSA is amending paragraph (b) to replace ``should be protected 
from radiant heat, which includes direct rays of the sun, and stowed in 
a cool, well-ventilated area'' with ``must be protected from sources of 
heat, including radiant heat and strong sunlight, and must be stowed in 
a cool, well-ventilated area.'' These changes are being made to 
incorporate the definitions of ``protected from sources of heat'' 
harmonize with the IMDG Code, and to emphasize that protecting 
shipments of organic peroxides not requiring temperature control from 
sources of heat is a requirement and not optional.
Section 176.600
    Section 176.600 prescribes detailed requirements for Division 2.3 
(Poisonous Gas) and Division 6.1 (Poisonous) materials transported by 
vessel. Paragraph (d) of this section requires each package of Division 
2.3 (poisonous gas) material or Division 6.1 (poison) material that 
also bears a FLAMMABLE LIQUID or FLAMMABLE GAS label must be stowed in 
a mechanically ventilated space, kept as cool as reasonably 
practicable, and be stowed away from all sources of heat and ignition.
    PHMSA is revising paragraph (d) to replace ``stowed away from all 
sources of heat and ignition'' with ``protected from sources of heat 
and stowed away from potential sources of ignition.'' These changes 
incorporate the definitions of ``protected from sources of heat'' and 
``potential or possible sources of ignition.''
    PHMSA received one comment from Horizon requesting that the 
mechanically ventilated space and protected from sources of ignition 
stowage requirements be applied only to 2.3 materials and 6.1 materials 
that are toxic by inhalation. The proposal in the NPRM was done solely 
to change the terminology based on the adoption of new international 
definitions for ``protected from sources of heat'' and ``potential or 
possible sources of ignition.'' No changes to the actual commodities 
that require such segregation were proposed or will be implemented in 
this rulemaking.
Section 176.907
    Section 176.907 is created to incorporate cargo transport 
requirements for shipments of UN2211, Polymeric Beads, Expandable 
evolving flammable vapor and UN3314, Plastics Molding Compound in 
dough, sheet or extruded rope form, evolving flammable vapor. Several 
cases of damage to cargo transport units were presented to the IMO with 
the root cause being identified as the release of flammable pentane gas 
during transportation of shipments UN2211 and UN3314. To address the 
concerns presented by off gassing of flammable vapors which lead to a 
rise in pressure that may damage cargo transport units, the IMO 
instituted measures to ensure an adequate exchange of air within the 
cargo transport unit is provided. PHMSA is harmonizing with the recent 
changes to the IMDG and addressing safety concerns presented by the off 
gassing of flammable vapors from shipments of UN2211 and UN3314 by 
requiring that when UN2211 or UN3314 are transported by vessel, the 
cargo transport unit must provide an adequate exchange of air. This 
adequate exchange of air may be accomplished by using a ventilated 
container, an open-top container, or a container in one door off 
operation. As an alternative to these methods of air exchange, shippers 
may transport these cargos under temperature control in refrigerated 
cargo transport units. Exceptions to the cargo transport unit providing 
an adequate exchange of air requirement are provided for shipments 
packed in hermetically sealed packagings or IBCs which conform to the 
packing group II performance level for liquid dangerous goods in which 
the total pressure in the package (i.e., the vapor pressure of the 
liquid plus the partial pressure of air or other inert gasses less 100 
kPa (15 psia)) with a filling temperature of 55[deg] C (131[deg] F) 
does not exceed two-thirds of the marked test pressure. Cargo transport 
units containing shipments of UN2211 or UN3314 must be marked with a 
warning mark including the words ``CAUTION--MAY CONTAIN FLAMMABLE 
VAPOR'' or ``CAUTION--MAY CONTAIN FLAMMABLE VAPOUR'' with lettering not 
less than 25 mm high. This mark must be affixed at each access point in 
a location where it will be easily seen by persons prior to opening or 
entering the cargo transport unit and must remain on the cargo 
transport unit until the cargo transport unit has been completely 
ventilated to remove any hazardous concentration of vapor or gas, the 
immediate vicinity of the cargo transport unit is clear of any source 
of ignition, and the goods have been unloaded.
    PHMSA received one comment from IVODGA requesting a further 
exception

[[Page 1021]]

for shipments that do not meet the ventilation requirements or the 
packaging requirements of the proposed section. IVODGA asked PHMSA to 
allow freight containers or transport vehicles containing these 
shipments not meeting the conditions of the proposed 176.907 to be 
allowed to be transported on vessel using on-deck stowage and stowed 
away from sources of potential ignition. PHMSA does not see a need to 
allow for less protective stowage provisions than the IMDG Code 
provides for these commodities. While the suggested stowage location 
and provisions proposed by IVODGA do represent a certain degree of 
caution; the adopted and harmonized requirements provide additional 
protection from the potential offgassing of pentane from these 
commodities; and thus PHMSA is adopting the changes as proposed in the 
NPRM.

Part 178

Section 178.71
    Section 178.71 prescribes specifications for UN pressure 
receptacles. In this final rule PHMSA is incorporating by reference ISO 
13340:2001(E) Transportable gas cylinders--Cylinder valves for non-
refillable cylinders--Specification and prototype testing, First 
edition, 2004-04-01. Non-refillable pressure receptacles must comply 
with cylinder valve requirements from ISO 13340. ISO 13340 was 
incorrectly proposed for addition to Sec.  178.274(i) in the NPRM. 
PHMSA is correcting this proposal by incorporating this standard into 
the correct sections and requiring non-refillable pressure receptacles 
to comply with cylinder valve requirements in ISO 13340.
Section 178.512
    Section 178.512 prescribes the standards, packaging identification 
codes, and construction requirements for steel and aluminum boxes (4A 
and 4B boxes). To incorporate the authorization for use of 4N boxes 
(metal other than steel or aluminum), the title of the section is 
revised to ``Standards for steel, aluminum or other metal boxes.'' 
Section 178.512 is also revised to include the authorized packaging 
identification code, 4N, for other metal boxes, and expand the 
construction requirements of the section to include these packagings. 
Subsequent changes are made throughout the section to address the 
inclusion of 4N other metal boxes.
Section 178.603
    Section 178.603 prescribes the drop test requirements for non-bulk 
packagings in the HMR. Section 178.603 provides that a drop test must 
be conducted for the qualification of all packaging design types, and 
further provides that exceptions for the number of steel and aluminum 
packaging samples used for conducting the drop test are subject to the 
approval of the Associate Administrator. Currently, paragraph (a) of 
this section contains a table that outlines specific types of 
packagings and the corresponding number of samples that should be 
tested and the drop orientation of those samples. In this final rule, 
PHMSA is revising this table by including ``other metal boxes'' to the 
listed packagings. To incorporate the authorization for use of 4N boxes 
(metal other than steel or aluminum), Sec.  178.603 is revised to 
require the drop test for other metal (4N) boxes, and authorize 
exceptions, subject to the approval of the Associate Administrator, for 
the number of samples used for conducting the drop test of these 
packagings.
Section 178.705
    Section 178.705 prescribes standards for metal IBCs. Paragraph 
(a)(3) indicates that IBC specifications 31A, 31B, and 31N are 
authorized for both liquids and solids. PHMSA is revising this sentence 
editorially by removing the authorization to package solids in 
specification 31 IBCs as the specification is only assigned to liquid 
substances. This editorial change is consistent with the Sec.  172.102 
IBC Code Table revisions in paragraph (c)(4) and other IBC standards 
(e.g., Sec.  178.707(a)(5)) prescribed in subpart N of part 178.
Section 178.910
    Section 178.910 prescribes the marking requirements for 
specification Large Packaging design types. Paragraph (a)(1) of this 
describes the size specifications and format of the marking 
requirements. In this final rule, PHMSA is clarifying these 
requirements by indicating that for large packages manufactured after 
January 1, 2014 the minimum marking size must be 12 mm in height.
    Furthermore, paragraph (b) of this section is now reserved. 
However, we are adding a paragraph (b) indicating that for all Large 
Packages manufactured, repaired or remanufactured after January 1, 2015 
the large package must be marked with the symbol applicable to a Large 
Package designed for stacking or not designed for stacking, as 
appropriate. This language will be accompanied by an example of such a 
mark.
Section 178.980
    Section 178.980 prescribes the procedures for conducting the 
stacking test for qualification of all Large Packaging design types. 
Paragraph (e)(1) describes the criterion a metal or rigid plastic Large 
Packaging must meet to be considered as successfully passing the 
stacking test. While paragraph (e) addresses metal or rigid plastic 
Large Packagings, the criterion that a fiberboard or wooden Large 
Packaging must meet to be considered as successfully passing the 
stacking test is omitted.
    Therefore, in this final rule, we are correcting this omission, by 
adding a new paragraph (e)(2) that addresses the criterion for 
fiberboard or wooden Large Packagings to pass the test and 
redesignating the following paragraphs accordingly.
Subpart R
    Currently, the HMR do not contain specifications for FBCs. In this 
final rule, PHMSA is adopting the specification, construction, and 
testing requirements for FBCs. On February 2, 2010, PHMSA published a 
final rule in the Federal Register under Docket Number PHMSA-2006- 
25736 (HM-231) [75 FR 4699] entitled ``Hazardous Materials; 
Miscellaneous Packaging Amendments.'' In HM-231, specification and 
testing requirements were adopted for Large Packagings. The 
specification and testing requirements for FBCs are modeled on the 
regulatory structure adopted for Large Packagings in HM-231. Thus, new 
subpart R of part 178 entitled ``Subpart R--Flexible Bulk Container 
Standards'' is added.
Section 178.1000
    PHMSA is adopting new Sec.  178.1000 entitled ``Purpose and 
scope.'' This section prescribes the packaging designs to which Subpart 
R applies and the location in the HMR where terms used in the subpart 
are defined.
Section 178.1005
    In this final rule, PHMSA is adding new Sec.  178.1005 entitled 
``Flexible Bulk Container Identification Code.'' This section provides 
the identification code (i.e. BK3) assigned to FBCs.
Section 178.1010
    In this final rule, PHMSA is adding new Sec.  178.1010 entitled 
``Marking of Flexible Bulk Containers.'' This section prescribes the 
markings the manufacturer of an FBC must mark on

[[Page 1022]]

a package to indicate the FBC meets the specification. The marking 
requirements for FBCs are based on the current marking requirements for 
IBCs prescribed in Sec.  178.703.
Section 178.1015
    In this final rule, PHMSA is adding new Sec.  178.1015 entitled 
``General Flexible Bulk Container Standards.'' This section prescribes 
the general packaging integrity requirements an FBC design must meet.
Section 178.1020
    In this final rule, PHMSA is adding new Sec.  178.1020 entitled 
``Period of use for transportation of hazardous materials in Flexible 
Bulk Containers.'' This section prescribes the length of time an FBC 
may be used to package hazardous materials. Specifically, this section 
states that an FBC used to package hazardous materials may remain in 
service not to exceed two years from the date of manufacture.
Subpart S
    Currently, the HMR do not prescribe testing criteria for FBCs. 
PHMSA is adopting testing protocol for FBCs. On February 2, 2010, PHMSA 
published a final rule in the Federal Register under Docket Number 
PHMSA-2006- 25736 (HM-231) [75 FR 4699] entitled ``Hazardous Materials; 
Miscellaneous Packaging Amendments.'' In HM-231, specification and 
testing requirements were adopted for Large Packagings. The test 
protocol proposed in this final rule for FBCs are modeled on the 
regulatory structure adopted for Large Packagings in HM-231. Thus, new 
subpart S of part 178 entitled ``Subpart S--Testing of Flexible Bulk 
Container Standards'' is added.
Section 178.1030
    In this final rule, PHMSA is adopting Sec.  178.1030 entitled 
``Purpose and scope.'' This section prescribes the applicability to 
which the Subpart S tests apply.
Section 178.1035
    In this final rule, PHMSA is adopting Sec.  178.1035 entitled 
``General requirements.'' This section prescribes the general packaging 
requirements for FBCs and addresses the following topics: FBC-related 
definitions; defining responsibility for compliance with specification 
requirements; design qualification testing; periodic design testing; 
proof of compliance; and record retention.
Section 178.1040
    In this final rule, PHMSA is adopting test preparation requirements 
for FBCs in new Sec.  178.1040 entitled ``Preparation of Flexible Bulk 
Containers for Testing.'' This section specifies the general test 
preparation requirements applicable to all tests an FBC is required to 
successfully pass.
Section 178.1045
    In this final rule, PHMSA is adopting requirements for drop tests 
conducted on FBCs. A drop test is used to measure a packaging's ability 
to withstand falls from specific heights and is used to determine if a 
package is suitable to transport hazardous materials. Thus, PHMSA is 
adding a new Sec.  178.1045 entitled ``Drop test.'' This section 
prescribes the preparation of test samples, test methods authorized, 
drop heights, and criteria for passing the drop test.
Section 178.1050
    In this final rule, PHMSA is adopting requirements for top lift 
tests conducted on FBCs. A top lift test measures a package's ability 
to be moved mechanically by lifting the package by its top end and is 
used to determine if a package is suitable to transport hazardous 
materials. Thus, PHMSA is adding new Sec.  178.1050 entitled ``Top lift 
test.'' This section prescribes requirements for the preparation of 
test samples, test methods authorized, and criteria for passing the top 
lift test.
Section 178.1055
    In this final rule, PHMSA is adopting requirements for stacking 
tests conducted on FBCs. A stacking test is used to measure a 
packaging's ability to withstand other packages placed on top of it and 
is used to determine if a package is suitable to transport hazardous 
materials. Thus, PHMSA is adding new Sec.  178.1055 entitled ``Stacking 
test.'' This section prescribes requirements for the preparation of 
test samples, test methods authorized, and criteria for passing the 
stacking test.
Section 178.1060
    In this final rule, PHMSA is adopting requirements for topple tests 
conducted on FBCs. A topple test is used to measure a packaging's 
ability to withstand tipping of the package and is used to determine if 
a package is suitable to transport hazardous materials. Thus, PHMSA is 
adding new Sec.  178.1060 entitled ``Topple test.'' This section 
prescribes the preparation of test samples, test methods authorized, 
topple height, and criteria for passing the topple test.
Section 178.1065
    In this final rule, PHMSA adopting requirements for righting tests 
conducted on FBCs. A righting test is used to measure a packaging's 
ability to withstand lifting from a lying position at a given rate of 
speed and is used to determine if a package is suitable to transport 
hazardous materials. Thus, PHMSA is adding new Sec.  178.1065 entitled 
``Righting test.'' This section prescribes the preparation of test 
samples, test methods authorized, and criteria for passing the righting 
test.
Section 178.1070
    In this final rule, PHMSA is adopting requirements for tear tests 
conducted on FBCs. A tear test is used to measure a packaging's ability 
to withstand shearing and tearing that may be encountered during 
transportation, such as loading and unloading, and is used to determine 
if a package is suitable to transport hazardous materials. Thus, PHMSA 
is adding new Sec.  178.1070 entitled ``Tear test.'' This section 
prescribes the preparation of test samples, test methods authorized, 
and criteria for passing the tear test.

V. Regulatory Analyses and Notices

A. Statutory/Legal Authority for This Rulemaking

    This final rule is published under the following statutory 
authorities:
    1. 49 U.S.C. 5103(b) authorizes the Secretary of Transportation to 
prescribe regulations for the safe transportation, including security, 
of hazardous materials in intrastate, interstate, and foreign commerce. 
This final rule amends regulations to maintain alignment with 
international standards by incorporating various amendments, including 
changes to proper shipping names, hazard classes, packing groups, 
special provisions, packaging authorizations, air transport quantity 
limitations and vessel stowage requirements. To this end, this final 
rule amends the HMR to more fully align with the biennial updates of 
the UN Model Regulations, the IMDG Code, and the ICAO Technical 
Instructions.
    Harmonization serves to facilitate international commerce; at the 
same time, harmonization promotes the safety of people, property, and 
the environment by reducing the potential for confusion and 
misunderstanding that could result if shippers and transporters were 
required to comply with two or more conflicting sets of regulatory 
requirements. While the intent of this rulemaking is to align the HMR 
with international standards, we review and consider each amendment

[[Page 1023]]

on its own merit based on its overall impact on transportation safety 
and the economic implications associated with its adoption into the 
HMR. Our goal is to harmonize without sacrificing the current HMR level 
of safety and without imposing undue burdens on the regulated 
community. Thus, as explained in the corresponding sections above, we 
are not harmonizing with certain specific provisions of the UN Model 
Regulations, the IMDG Code, and the ICAO Technical Instructions. 
Moreover, we are maintaining a number of current exceptions for 
domestic transportation that should minimize the compliance burden on 
the regulated community. Additionally, the following external agencies 
were consulted in the development of this rule:

U.S. Coast Guard
U.S. Department of Agriculture (USDA)
U.S. Department of Energy
U.S. Department of Interior
U.S. Department of Justice

    2. 49 U.S.C. 5120(b) authorizes the Secretary of Transportation to 
ensure that, to the extent practicable, regulations governing the 
transportation of hazardous materials in commerce are consistent with 
standards adopted by international authorities. This final rule is 
amending the HMR to maintain alignment with international standards by 
incorporating various amendments to facilitate the transport of 
hazardous material in international commerce. To this end, as discussed 
in detail above, PHMSA is incorporating changes into the HMR based on 
the 17th Revised Edition of the UN Model Regulations, Amendment 36-12 
to the IMDG Code, and the 2013-2014 ICAO Technical Instructions, which 
become effective January 1, 2013. The large volume of hazardous 
materials transported in international commerce warrants the 
harmonization of domestic and international requirements to the 
greatest extent possible.

B. Executive Orders 12866 and 13563 and DOT Regulatory Policies and 
Procedures

    This final rule is not considered a significant regulatory action 
under section 3(f) of Executive Order 12866 (``Regulatory Planning and 
Review'') and, therefore, was not reviewed by the Office of Management 
and Budget. This final rule is not considered a significant rule under 
the Regulatory Policies and Procedures of the Department of 
Transportation (44 FR 11034). Additionally, E.O. 13563 (``Improving 
Regulation and Regulatory Review'') supplements and reaffirms E.O. 
12866, stressing that, to the extent permitted by law, an agency 
rulemaking action must be based on benefits that justify its costs, 
impose the least burden, consider cumulative burdens, maximize 
benefits, use performance objectives, and assess available 
alternatives.
    Economic Benefits to Harmonization. In this final rule, PHMSA is 
incorporating by reference the most recent versions of various 
international hazardous materials standards, including the 2013-2014 
ICAO Technical Instructions, Amendment 36-12 to the IMDG Code, and the 
17th Revised Edition of the UN Model Regulations. Additionally, PHMSA 
is updating its incorporation by reference of the Canadian 
Transportation of Dangerous Goods Regulations to include Amendment 8 
(SOR/2011-239) October 27, 2011; Amendment 9 (SOR/2011-60) March 3, 
2011; and Amendment 10 (SOR/2011-210) September 30, 2011. Lastly, PHMSA 
is adopting updated International Standards Organization (ISO) 
standards.
    The primary benefit of harmonizing the U.S. Hazardous Materials 
Regulations (HMR) with the international hazardous materials standards 
noted previously is that it will reduce the regulatory compliance costs 
faced by U.S. companies. Without harmonization, these companies will be 
forced to comply with dual systems of regulations, and as a result will 
incur higher compliance costs than would be encountered under a single 
regulatory scheme. The benefit of harmonization attributable to this 
rulemaking is the difference in regulatory compliance costs faced by 
companies operating under a single regulatory framework instead of 
multiple regulatory frameworks.
    If the U.S. regulations were not harmonized with the international 
standards mentioned above, we estimate that it would cost U.S. 
companies an additional $62 million per year to comply with both the 
HMR and the international standards. Harmonizing the HMR with the 
international standards, however, will avert these $62 million in 
additional costs, and these averted costs are therefore considered the 
primary benefit attributable to this rulemaking.
    The $62 million estimate is based on the assumption that in the 
absence of harmonization both exporters and importers would have to 
adhere to two separate hazard communication systems, one used for the 
transportation of materials within the United States and one used for 
the transportation of materials outside the United States. Exporters 
would directly incur four different cost elements and would have to pay 
for (1) dual labels and safety data sheets, (2) additional training, 
(3) additional management activities, and (4) additional packaging 
costs. Foreign producers who ship products to the United States would 
also incur these four cost elements, and we assume that the foreign 
producers would pass half of those incurred costs on to U.S. consumers 
in the form of higher prices.
    To develop the $62 million estimate, we estimated the average 
hazard communication cost per dollar of hazardous materials produced in 
the United States and then multiplied that cost figure by an estimate 
of the value of U.S. imports and exports of hazardous materials. In 
other words, in the absence of harmonization, we assume that companies 
involved with U.S. foreign trade would have to pay for additional 
hazard communication requirements for international movements; these 
companies would have to comply with the HMR communication requirements 
during domestic legs of the movement and with international standards 
during legs of the movement outside of the United States.
    A proxy for hazard communication costs was obtained from a recent 
Occupational Safety and Health Administration study looking at the 
costs for industry to comply with the revised Hazard Communication 
Standard.\2\ The study estimated the total compliance cost to be $201 
million per year based on four cost elements: revisions to labels and 
safety data sheets, additional training, additional management 
activities, and printing of color packaging. The first three cost 
elements are relevant for our purposes and totaled $177 million.
---------------------------------------------------------------------------

    \2\ http://www.osha.gov/dsg/hazcom/hazcom-faq.html.
---------------------------------------------------------------------------

    To put the $177 million hazard communication cost estimate on a per 
unit basis, we divided the $177 million by an estimate of the total 
value of hazardous materials produced in the United States in 2010. The 
total value of hazardous materials produced in the United States was 
estimated to be $151 billion. To derive this $151 billion estimate, we 
summed relevant product values reported in the Census Bureau's Annual 
Survey of Manufactures: Value of Product Shipments, and then multiplied 
the result by 12.4 percent--the percentage of shipment values reported 
to be hazardous products (this parameter was obtained from Table 10 in 
the Census Bureau's 2007 Commodity Flow Survey for Hazardous 
Materials). The resulting hazard communication cost per dollar of 
hazardous materials

[[Page 1024]]

output was estimated to be $0.001 (or $177 million / $151 billion).
    We were not able to identify any comprehensive source on hazardous 
materials imports and exports and therefore developed estimates for 
these figures using quarterly trade data from the Bureau of Economic 
Analysis \3\ and data on the transportation of hazardous materials from 
the Census Bureau's 2007 Commodity Flow Survey. The quarterly trade 
data on the value of imports and exports--for fuels and lubricants, 
chemicals, and medicinal/dental/pharmaceutical products--were summed to 
produce a single annual trade value for 2010 for industries that 
produce hazardous materials. Before aggregating the import and export 
values, we reduced the import values by half to take into account the 
assumption mentioned previously that foreign producers would be able to 
pass on only half of the additional hazard communication costs to U.S. 
consumers. Total annual trade for industries that produce hazardous 
materials was computed to be just over $498 billion in 2010.
---------------------------------------------------------------------------

    \3\ http://www.bea.gov/international/detailed_trade_data.htm.
---------------------------------------------------------------------------

    We then multiplied this $498 billion trade figure by 12.4 percent, 
the percentage of output in these industries reported to be hazardous 
products; this parameter was obtained from Table 10 in the 2007 
Commodity Flow Survey for Hazardous Materials. The resulting estimate 
indicates that approximately $62 billion worth of hazardous materials 
were involved in international trade with the United States in 2010.
    Multiplying the hazard communication cost per dollar of hazardous 
material output ($0.001) by the value of hazardous materials involved 
in international trade ($62 billion) results in a hazard communication 
cost estimate of approximately $62 million per year that companies 
would have to pay to comply with different regulatory requirements 
applicable to international movements. Harmonizing the HMR with 
international standards will make these $62 million in hazard 
communications costs unnecessary, and therefore is the main benefit 
attributable to this rulemaking.
    Cost of Harmonization. The potential costs of this rulemaking 
include private sector compliance costs and any costs that can be 
attributed to a possible reduction in public safety as a result of 
harmonizing the HMR with international standards. We expect that both 
of these costs will be negligible. Estimates suggest that private 
sector compliance costs associated with complying with the different 
amendments in the final rule will be minimal. In terms of costs due to 
any reduction in public safety as a result of harmonizing the HMR with 
international standards, PHMSA believes that none of the proposed 
revisions to the HMR have material safety impacts. We therefore assume 
that the gross social costs of this NPRM are effectively zero.
    Net Benefit. Based on the discussions of benefits and costs 
provided above the estimated net benefit associated with the 
international harmonization final rule (2137-AE87) is nearly $62 
million.

C. Executive Order 13132

    This final rule has been analyzed in accordance with the principles 
and criteria contained in Executive Order 13132 (``Federalism''). This 
final rule preempts State, local, and Indian tribe requirements but 
does not impose any regulation that has substantial direct effects on 
the States, the relationship between the national government and the 
States, or the distribution of power and responsibilities among the 
various levels of government. Therefore, the consultation and funding 
requirements of Executive Order 13132 do not apply.
    The Federal hazardous material transportation law, 49 U.S.C. 5101-
5128, contains an express preemption provision (49 U.S.C. 5125(b)) that 
preempts State, local, and Indian tribe requirements on certain covered 
subjects, as follows:
    (1) The designation, description, and classification of hazardous 
material;
    (2) The packing, repacking, handling, labeling, marking, and 
placarding of hazardous material;
    (3) The preparation, execution, and use of shipping documents 
related to hazardous material and requirements related to the number, 
contents, and placement of those documents;
    (4) The written notification, recording, and reporting of the 
unintentional release in transportation of hazardous material; and
    (5) The design, manufacture, fabrication, inspection, marking, 
maintenance, recondition, repair, or testing of a packaging or 
container represented, marked, certified, or sold as qualified for use 
in transporting hazardous material in commerce.
    This final rule addresses covered subject items (1), (2), (3), (4) 
and (5) above and preempts State, local, and Indian tribe requirements 
not meeting the ``substantively the same'' standard. This final rule is 
necessary to incorporate changes adopted in international standards, 
effective January 1, 2013. If this final rule was not adopted, U.S. 
companies, including numerous small entities competing in foreign 
markets, will be at an economic disadvantage. These companies will be 
forced to comply with a dual system of regulations. The changes in this 
final rule are intended to avoid this result. Federal hazardous 
materials transportation law provides at 49 U.S.C. 5125(b)(2) that, if 
DOT issues a regulation concerning any of the covered subjects, DOT 
must determine and publish in the Federal Register the effective date 
of Federal preemption. The effective date may not be earlier than the 
90th day following the date of issuance of the final rule and not later 
than two years after the date of issuance. The effective date of 
Federal preemption is 90 days from publication of this final rule.

D. Executive Order 13175

    This final rule was analyzed in accordance with the principles and 
criteria contained in Executive Order 13175 (``Consultation and 
Coordination with Indian Tribal Governments''). Because this final rule 
does not have tribal implications and, does not impose substantial 
direct compliance costs the funding and consultation requirements of 
Executive Order 13175 do not apply.

E. Regulatory Flexibility Act, Executive Order 13272, and DOT 
Procedures and Policies

    The Regulatory Flexibility Act (5 U.S.C. 601 et seq.) requires an 
agency to review regulations to assess their impact on small entities, 
unless the agency determines that a rule is not expected to have a 
significant impact on a substantial number of small entities. This 
final rule facilitates the transportation of hazardous materials in 
international commerce by providing consistency with international 
standards. This final rule applies to offerors and carriers of 
hazardous materials, some of whom are small entities, such as chemical 
manufacturers, users and suppliers, packaging manufacturers, 
distributors, and training companies. As discussed above, under 
Executive Order 12866, the majority of amendments in this final rule 
should result in cost savings and ease the regulatory compliance burden 
for shippers engaged in domestic and international commerce, including 
trans-border shipments within North America.
    Many companies will realize economic benefits as a result of these 
amendments. Additionally, the changes effected by this final rule will 
relieve U.S. companies, including small entities

[[Page 1025]]

competing in foreign markets, from the burden of complying with a dual 
system of regulations. Therefore, we certify that these amendments will 
not have a significant economic impact on a substantial number of small 
entities.
    This final rule has been developed in accordance with Executive 
Order 13272 (``Proper Consideration of Small Entities in Agency 
Rulemaking'') and DOT's procedures and policies to promote compliance 
with the Regulatory Flexibility Act to ensure that potential impacts of 
draft rules on small entities are properly considered.

F. Paperwork Reduction Act

    PHMSA currently has approved information collections under Office 
of Management and Budget (OMB) Control Number 2137-0018, ``Inspection 
and Testing of Portable Tanks and Intermediate Bulk Containers,'' and 
OMB Control Number 2137-0572, ``Testing Requirements for Non-Bulk 
Packages.'' This final rule may result in an increase in the annual 
burden and costs of both OMB Control Numbers due to the proposed 
amendments to allow the use of metals other than steel or aluminum for 
drums and boxes as well as the proposed new Flexible Bulk Container 
package authorization, which will require package manufacturers to 
document and maintain package test results, should they elect to 
manufacture Flexible Bulk Containers or of metals other than steel or 
aluminum for drums and boxes.
    Under the Paperwork Reduction Act of 1995, no person is required to 
respond to an information collection unless it has been approved by OMB 
and displays a valid OMB control number. Section 1320.8(d), title 5, 
Code of Federal Regulations requires that PHMSA provide interested 
members of the public and affected agencies an opportunity to comment 
on information and recordkeeping requests.
    This notice identifies revised information collection requests that 
PHMSA will submit to OMB for approval based on the requirements in this 
final rule. PHMSA has developed burden estimates to reflect changes in 
this final rule, and estimates the information collection and 
recordkeeping burden in this rule to be as follows:
    OMB Control No.: 2137-0018.
    Annual Increase in Number of Respondents: 25.
    Annual Increase in Annual Number of Responses: 50.
    Annual Increase in Annual Burden Hours: 200.
    Annual Increase in Annual Burden Costs: $5,000.
    50 estimated responses at $25 per hour and four hours per response.
    OMB Control No.: 2137-0572.
    Annual Increase in Number of Respondents: 100.
    Annual Increase in Annual Number of Responses: 300.
    Annual Increase in Annual Burden Hours: 600.
    Annual Increase in Annual Burden Costs: $15,000.
    300 Annual responses at $25 per hour and 2 hours per response.
    PHMSA will submit the revised information collection and 
recordkeeping requirements to OMB for approval.

G. Regulation Identifier Number (RIN)

    A regulation identifier number (RIN) is assigned to each regulatory 
action listed in the Unified Agenda of Federal Regulations. The 
Regulatory Information Service Center generally publishes the Unified 
Agenda in April and October of each year. The RIN contained in the 
heading of this document can be used to cross-reference this action 
with the Unified Agenda.

H. Unfunded Mandates Reform Act

    This final rule does not impose unfunded mandates under the 
Unfunded Mandates Reform Act of 1995. It does not result in costs of 
$141.3 million or more, adjusted for inflation, to either State, local, 
or tribal governments, in the aggregate, or to the private sector in 
any one year, and is the least burdensome alternative that achieves the 
objective of the rule.

I. Environmental Assessment

    The National Environmental Policy Act, 42 U.S.C. 4321-4375, 
requires that federal agencies consider the consequences of major 
Federal actions and prepare a detailed statement on actions 
significantly affecting the quality of the human environment. The 
Council on Environmental Quality (CEQ) regulations require federal 
agencies to conduct an environmental review considering: (1) The need 
for the action; (2) alternatives to the action; (3) probable 
environmental impacts of the action and alternatives; and (4) the 
agencies and persons consulted during the consideration process (40 CFR 
1508.9(b)).
Description of Action
    Docket No. PHMSA-2012-0027 (HM-215L), Final Rule. The 
transportation of hazardous materials in commerce is subject to the 
HMR, issued under authority of Federal hazardous materials 
transportation law, codified at 49 U.S.C. 5001 et seq. To facilitate 
the safe and efficient transportation of hazardous materials in 
international commerce, the HMR provides that both domestic and 
international shipments of hazardous materials may be offered for 
transportation and transported under provisions of the international 
regulations.
Purpose and Need
    In this final rule, PHMSA is amending the HMR to maintain alignment 
with international standards by incorporating various amendments, 
including changes to proper shipping names, hazard classes, packing 
groups, special provisions, packaging authorizations, air transport 
quantity limitations, and vessel stowage requirements. These revisions 
are necessary to harmonize and align the HMR with recent amendments 
adopted in the UN Model Regulations, IMDG Code, and the ICAO Technical 
Instructions. The amendments in this final rule are intended to 
facilitate the safe and efficient transportation of hazardous materials 
in international commerce, provide clarity designed to encourage and 
increase regulatory compliance, and improve the efficacy of emergency 
response in the event a hazardous materials incident occurs.
Alternatives
    In developing this rule, we considered three alternatives:
    (1) Do nothing.
    (2) Adopt the international standards in their entirety.
    (3) Adopt most of the international standards, with certain 
modifications based on safety or economic considerations.
Alternative 1
    Because our goal is to facilitate uniformity, compliance, commerce 
and safety in the transportation of hazardous materials, we rejected 
this alternative.
Alternative 2
    By adopting the international standards in their entirety, PHMSA 
could potentially adopt provisions that, in our view, do not provide an 
adequate level of transportation safety and environmental safety and 
protection. Further, because we provide for domestic exceptions and 
extended compliance periods to minimize the potential economic impact 
of any revisions on the regulated community, this alternative was also 
rejected.
Alternative 3
    Consistency between U.S. and international regulations helps to 
assure the safety of international hazardous

[[Page 1026]]

materials transportation and the environment through better 
understanding of the regulations, an increased level of compliance, the 
smooth flow of hazardous materials from their points of origin to their 
points of destination, and effective emergency response in the event of 
a hazardous materials incident. Under Alternative 3, we would harmonize 
the HMR with international standards to the extent consistent with U.S. 
safety, economic, and environmental protection goals.
    Alternative 3 is the only alternative that addresses, in all 
respects, the purpose of this regulatory action, which is to facilitate 
the safe and efficient transportation of hazardous materials in 
international commerce and the protection of the environment. These 
actions will provide the greatest possible harmonization with 
international requirements without posing an undue increased cost 
burden on the regulated community. For these reasons, alternative 3 is 
our selected alternative.
Analysis of Environmental Impacts
    Hazardous materials are transported by aircraft, vessel, rail, and 
highway. The potential for environmental damage or contamination exists 
when packages of hazardous materials are involved in accidents or en 
route incidents resulting from cargo shifts, valve failures, package 
failures, or loading, unloading, or handling problems. The ecosystems 
that could be affected by a release include air, water, soil, and 
ecological resources (for example, wildlife habitats). The adverse 
environmental impacts associated with releases of most hazardous 
materials are short-term impacts that can be greatly reduced or 
eliminated through prompt clean-up of the accident scene. Most 
hazardous materials are not transported in quantities sufficient to 
cause significant, long-term environmental damage if they are released.
    The hazardous material regulatory system is a risk-management 
system that is prevention-oriented and focused on identifying hazards 
and reducing the probability and quantity of a hazardous material 
release. Amending the HMR to maintain alignment with international 
standards enhances the safe transportation of hazardous materials in 
domestic and international commerce. When considering the adoption of 
international standards under the HMR, we review and consider each 
amendment on its own merit and assess the likely impact on 
transportation safety and the environment. It is our conclusion that 
the provisions in this final rule will not have either a substantial 
positive or adverse effect on the environment. In this final rule PHMSA 
is adopting the following noteworthy amendments to the HMR:
    Chemicals under pressure. Manufacturers in the United Kingdom, the 
United States, Australia, Canada, and other countries are supplying 
pressurized products contained and transported in gas cylinders. The 
products are liquids or solids such as adhesives, coatings and cleaners 
combined with a gas or gas mixtures in pressure receptacles under 
sufficient pressure to expel the contents. These mixtures are typically 
expelled from the pressurized cylinders as foams, streams or thick 
sprays. Currently the HMR does not comprehensively address chemicals 
under pressure. Because of the substantial packaging integrity inherent 
in pressure vessel designs, PHMSA believes the chemical under pressure 
amendments in this rule will result in a positive environmental impact.
    Flexible Bulk Containers (FBCs). Incorporate a new packaging 
definition, operational controls, performance-oriented standards, and 
testing requirements for Flexible Bulk Containers (FBCs). FBCs are 
flexible bulk packages with a capacity over the currently authorized 
maximum volumetric capacity for flexible IBCs, but not exceeding 15 
cubic meters. FBCs provide shippers the opportunity to utilize a 
reusable flexible packaging for bulk shipments of certain authorized 
low-hazard commodities, all of which are currently authorized in non-
specification bulk bins. Because of the inherent integrity of a 
specification packaging design when compared to a non-specification 
packaging design, PHMSA believes the amendments in this final rule 
authorizing the construction and use of FBCs will result in a net 
positive environmental impact due to a possible decrease in the 
unintentional release of hazardous material.
    Packaging Authorizations. Part 173 of the HMR prescribes the 
general requirements for shipment preparation and packaging selection 
for hazardous materials. Consistent with amendments adopted in the 
various international standards, we are amending multiple Part 173 
packaging sections by authorizing additional packaging specifications 
used to package hazardous materials. These amendments include, but are 
not limited to, the authorization to use wood as a material of package 
construction for certain explosives, the authorization to use metals 
other than steel or aluminum for boxes and drums for certain hazardous 
materials, and the incorporation of authorizations and specifications 
of FBCs. Because of the substantial integrity in the newly authorized 
packaging specifications, PHMSA believes the amendments in this final 
rule will result in a positive environmental impact. Higher integrity 
packaging designs prevent the unintentional release of hazardous 
materials when transported in commerce.
    Vessel Stowage Requirements. The requirements for vessel stowage 
are described and specified in Sec.  172.101(k) and HMT entries are 
assigned appropriate vessel stowage codes and stowage special 
provisions in column 10 of the HMT. We are clarifying these 
instructions by revising the vessel stowage location requirements for 
explosives and reducing the number of explosive stowage categories from 
15 to 5 in column 10A of the HMT. Specifically, explosive stowage 
categories 6 through 15 are eliminated, and stowage categories 1 
through 5 are retained and modified. We are also adopting modifications 
to the vessel stowage provisions indicated in column 10B of the HMT. In 
order to harmonize with the IMDG Code, PHMSA is incorporating the 
addition of a new definition for protected from sources of heat and 
potential or possible sources of ignition (see Section 176.2 of this 
final rule for definitions), and subsequently revise and delete various 
vessel stowage provisions.
    The amendments adopted in this final rule consolidate the number of 
vessel stowage codes for explosives, resulting in greater clarity in 
the HMR and reducing the potential for unintentional release of 
hazardous materials. PHMSA believes these changes will have a positive 
impact on the environment.
Conclusion
    In the NPRM PHMSA sought public comments on our environmental 
assessment. No comments were received. In this final rule, PHMSA is 
amending the HMR in response to revisions adopted in the various 
international standards. Through this integrated and cooperative 
approach, we believe we can be most successful in reducing incidents, 
enhancing public safety, and protecting the environment. The amendments 
are intended to update, clarify, or provide relief from certain 
existing regulatory requirements and to provide greater flexibility in 
packaging selection suitable for the transportation of hazardous 
materials. PHMSA believes the net environmental impact of this rule 
will be somewhat positive. Additionally, we believe there

[[Page 1027]]

will be little or no adverse environmental impact associated with the 
amendments adopted in this rule. We conclude that there are no 
significant environmental impacts associated with this rule.

J. Privacy Act

    Anyone is able to search the electronic form of all comments 
received into any of our dockets by the name of the individual 
submitting the comments (or signing the comment, if submitted on behalf 
of an association, business, labor union, etc.). You may review DOT's 
complete Privacy Act Statement in the Federal Register published on 
April 11, 2000 (Volume 65, Number 70; Pages 19477-78) which may be 
viewed at http://www.gpo.gov/fdsys/pkg/FR-2000-04-11/pdf/00-8505.pdf.

K. Executive Order 13609 and International Trade Analysis

    Under E.O. 13609, agencies must consider whether the impacts 
associated with significant variations between domestic and 
international regulatory approaches are unnecessary or may impair the 
ability of American business to export and compete internationally. In 
meeting shared challenges involving health, safety, labor, security, 
environmental, and other issues, international regulatory cooperation 
can identify approaches that are at least as protective as those that 
are or would be adopted in the absence of such cooperation. 
International regulatory cooperation can also reduce, eliminate, or 
prevent unnecessary differences in regulatory requirements.
    Similarly, the Trade Agreements Act of 1979 (Public Law 96-39), as 
amended by the Uruguay Round Agreements Act (Public Law 103-465), 
prohibits Federal agencies from establishing any standards or engaging 
in related activities that create unnecessary obstacles to the foreign 
commerce of the United States. For purposes of these requirements, 
Federal agencies may participate in the establishment of international 
standards, so long as the standards have a legitimate domestic 
objective, such as providing for safety, and do not operate to exclude 
imports that meet this objective. The statute also requires 
consideration of international standards and, where appropriate, that 
they be the basis for U.S. standards.
    PHMSA participates in the establishment of international standards 
to protect the safety of the American public, and we have assessed the 
effects of this final rule to ensure that it does not cause unnecessary 
obstacles to foreign trade. In fact, the rule is designed to facilitate 
international trade. Accordingly, this rulemaking is consistent with 
E.O. 13609 and PHMSA's obligations under the Trade Agreement Act, as 
amended.

List of Subjects

49 CFR Part 171

    Exports, Hazardous materials transportation, Hazardous waste, 
Imports, Incorporation by reference, Reporting and recordkeeping 
requirements.

49 CFR Part 172

    Education, Hazardous materials transportation, Hazardous waste, 
Incorporation by reference, Labeling, Markings, Packaging and 
containers, Reporting and recordkeeping requirements.

49 CFR Part 173

    Hazardous materials transportation, Incorporation by reference, 
Packaging and containers, Radioactive materials, Reporting and 
recordkeeping requirements, Uranium.

49 CFR Part 175

    Air carriers, Hazardous materials transportation, Incorporation by 
reference, Radioactive materials, Reporting and recordkeeping 
requirements.

49 CFR Part 176

    Hazardous materials transportation, Incorporation by reference, 
Maritime carriers, Radioactive materials, Reporting and recordkeeping 
requirements.

49 CFR Part 178

    Hazardous materials transportation, Incorporation by reference, 
Motor vehicle safety, Packaging and containers, Reporting and 
recordkeeping requirements.

49 CFR Part 180

    Hazardous materials transportation, Motor carriers, Motor vehicle 
safety, Packaging and containers, Railroad safety, Reporting and 
recordkeeping requirements.

    In consideration of the foregoing, PHMSA is amending 49 CFR Chapter 
I as follows:

PART 171--GENERAL INFORMATION, REGULATIONS, AND DEFINITIONS

0
1. The authority citation for part 171 continues to read as follows:

    Authority:  49 U.S.C. 5101-5128, 44701; 49 CFR 1.45 and 1.53; 
Pub. L. 101-410 section 4 (28 U.S.C. 2461 note); Pub. L. 104-134 
section 31001.

0
2. Revise Sec.  171.7 to read as follows:


Sec.  171.7  Reference material.

    (a) Matter incorporated by reference--(1) General. There is 
incorporated, by reference in parts 170-189 of this subchapter, matter 
referred to that is not specifically set forth. This matter is hereby 
made a part of the regulations in parts 170-189 of this subchapter. The 
matter subject to change is incorporated only as it is in effect on the 
date of issuance of the regulation referring to that matter. The 
material listed in paragraphs (b) through (ee) of this secton have been 
approved for incorporation by reference by the Director of the Federal 
Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Material 
is incorporated as it exists on the date of the approval and a notice 
of any change in the material will be published in the Federal 
Register. Matters referenced by footnote are included as part of the 
regulations of this subchapter.
    (2) Accessibility of materials. All incorporated matter is 
available for inspection at:
    (i) The Office of Hazardous Materials Safety, Office of Hazardous 
Materials Standards, East Building, PHH-10, 1200 New Jersey Avenue SE., 
Washington, DC 20590-0001. For information on the availability of this 
material at PHH-10, call 1-800-467-4922, or go to: http://www.phmsa.dot.gov; and
    (ii) The National Archives and Records Administration (NARA). For 
information on the availability of this material at NARA, call 202-741-
6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.
    (b) Air Transport Association of America, 1301 Pennsylvania Avenue 
NW., Washington, DC 20004-1707.
    (1) ATA Specification No. 300 Packaging of Airline Supplies, 
Revision 19, July 31, 1996, into Sec.  172.102.
    (2) [Reserved]
    (c) The Aluminum Association, 1525 Wilson Blvd., Suite 6000, 
Arlington, VA 22209, telephone 703-358-2960, http://www.aluminum.org.
    (1) Aluminum Standards and Data, Seventh Edition, June 1982, into 
Sec. Sec.  172.102; 178.65.
    (2) Welding Aluminum: Theory and Practice, 2002 Fourth Edition, 
into Sec.  178.68.
    (d) American National Standards Institute, Inc., 25 West 43rd 
Street, New York, NY 10036.
    (1) ANSI/ASHRAE 15-94, Safety Code for Mechanical Refrigeration, 
1944, into Sec. Sec.  173.306; 173.307.
    (2) ANSI B16.5-77, Steel Pipe Flanges, Flanged Fittings, 1977, into 
Sec.  178.360-4.

[[Page 1028]]

    (3) ANSI N14.1 Uranium Hexafluoride--Packaging for Transport, 1971 
Edition, into Sec. Sec.  173.417; 173.420.
    (4) ANSI N14.1 Uranium Hexafluoride--Packaging for Transport, 1982 
Edition, into Sec. Sec.  173.417; 173.420.
    (5) ANSI N14.1 Uranium Hexafluoride--Packaging for Transport, 1987 
Edition, into Sec. Sec.  173.417; 173.420.
    (6) ANSI N14.1 Uranium Hexafluoride--Packaging for Transport, 1990 
Edition, into Sec. Sec.  173.417; 173.420.
    (7) ANSI N14.1 Uranium Hexafluoride--Packaging for Transport, 1995 
Edition, into Sec. Sec.  173.417; 173.420.
    (8) ANSI N14.1 Uranium Hexafluoride--Packaging for Transport, 2001 
Edition, into Sec. Sec.  173.417; 173.420.
    (e) American Petroleum Institute, 1220 L Street NW., Washington, DC 
20005-4070.
    (1) API Recommended Practice Closures of Underground Petroleum 
Storage Tanks, 3rd Edition, March 1996, into Sec.  172.102.
    (2) [Reserved]
    (f) American Pyrotechnics Association (APA), P.O. Box 30438, 
Bethesda, MD 20824, (301) 907-8181, www.americanpyro.com.
    (1) APA Standard 87-1, Standard for Construction and Approval for 
Transportation of Fireworks, Novelties, and Theatrical Pyrotechnics, 
December 1, 2001 version into Sec.  173.56.
    (2) [Reserved]
    (g) American Society of Mechanical Engineers, ASME International, 
22 Law Drive, P.O. Box 2900, Fairfield, NJ 07007-2900, telephone 1-800-
843-2763 or 1-973-882-1170, http://www.asme.org.
    (1) `ASME Code'; ASME Code, Sections II (Parts A and B), V, VIII 
(Division 1), and IX of 1998 Edition of American Society of Mechanical 
Engineers Boiler and Pressure Vessel Code, into Sec. Sec.  172.102; 
173.5b; 173.24b; 173.32; 173.306; 173.315; 173.318; 173.420; 178.245-1; 
178.245-3; 178.245-4; 178.245-6; 178.245-7; 178.255-1; 178.255-2; 
178.255-14; 178.255-15; 178.270-2; 178.270-3; 178.270-7; 178.270-9; 
178.270-11; 178.270-12; 178.271-1; 178.272-1; 178.273; 178.274; 
178.276; 178.277; 178.320; 178.337-1; 178.337-2; 178.337-3; 178.337-4; 
178.337-6; 178.337-16; 178.337-18; 178.338-1; 178.338-2; 178.338-3; 
178.338-4; 178.338-5; 178.338-6; 178.338-13; 178.338-16; 178.338-18; 
178.338-19; 178.345-1; 178.345-2; 178.345-3; 178.345-4; 178.345-7; 
178.345-14; 178.345-15; 178.346-1; 178.347-1; 178.348-1; 179.400-3; 
180.407.
    (2) ASME B31.4-1998 Edition, Pipeline Transportation Systems for 
Liquid Hydrocarbons and other Liquids, Chapters II, III, IV, V and VI, 
November 11, 1998, into Sec.  173.5a.
    (h) American Society for Testing and Materials, 100 Barr Harbor 
Drive, West Conshohocken, PA 1942, telephone (610) 832-9585, http://www.astm.org. Copies of historical standards or standards that ASTM 
does not have may be purchased from: Engineering Societies Library, 354 
East 47th Street, New York, NY 10017.
    (1) ASTM A 20/A 20M-93a Standard Specification for General 
Requirements for Steel Plates for Pressure Vessels, 1993, into 
Sec. Sec.  178.337-2; 179.102-4; 179.102-1; 179.102-17.
    (2) ASTM A 47-68 Malleable Iron Castings, 1968, into Sec.  179.200-
15.
    (3) ASTM A 53/A 53M-06a (ASTM A 53) Standard Specification for 
Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless, 
2006, into Sec.  173.5b.
    (4) ASTM A 106/A 106M-06a (ASTM A 106) Standard Specification for 
Seamless Carbon Steel Pipe for High-Temperature Service, 2006, into 
Sec.  173.5b.
    (5) ASTM A 240/A 240M-99b Standard Specification for Heat-Resisting 
Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for 
Pressure Vessels, 1999, into Sec. Sec.  178.57; 178.358-5; 179.100-7; 
179.100-10; 179.102-1; 179.102-4; 179.102-17; 179.200-7; 179.201-5; 
179.220-7; 179.300-7; 179.400-5.
    (6) ASTM A 242-81 Standard Specification for High-Strength Low-
Alloy Structural Steel, 1981, into Sec.  178.338-2.
    (7) ASTM A 262-93a Standard Practices for Detecting Susceptibility 
to Intergranular Attack in Austenitic Stainless Steels, 1993, into 
179.100-7; 179.200-7; 179.201-4.
    (8) ASTM A 285-78 Pressure Vessel Plates, Carbon Steel, Low- and 
Intermediate-Tensile Strength, 1978, into Sec.  179.300-7.
    (9) ASTM A 300-58 Steel Plates for Pressure Vessels for Service at 
Low Temperatures, 1958, into Sec.  178.337-2.
    (10) ASTM A 302/A 302M-93 Standard Specification for Pressure 
Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-
Molybdenum Nickel, 1993, into Sec.  179.100-7; 179.200-7; 179.220-7.
    (11) ASTM A 333-67 Seamless and Welded Steel Pipe for Low-
Temperature Service, 1967, into Sec.  178.45.
    (12) ASTM A 370-94 Standard Test 179.102-1; 179.102-4; Methods and 
Definitions for Mechanical Testing of Steel Products, 1994, into 
Sec. Sec.  179.102-17; 179.102-1; 179.102-4.
    (13) ASTM A 441-81 Standard Specification for High-Strength Low-
Alloy Structural Manganese Vanadium Steel, 1981, into Sec.  178.338-2.
    (14) ASTM A 514-81 Standard Specification for High-Yield Strength 
Quenched and Tempered Alloy Steel Plate, Suitable for Welding, 1981, 
into Sec.  178.338-2.
    (15) ASTM A 515/A 515M-03 Standard Specification for Pressure 
Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature 
Service, 2003, into Sec.  179.300-7.
    (16) ASTM A 516/A 516M-90 Standard Specification for Pressure 
Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature 
Service, 1990, into Sec.  178.337-2; 179.100-7; 179.102-1; 179.102-2; 
179.102-4; 179.102-17; 179.200-7; 179.220-7; 179.300-7.
    (17) ASTM A 537/A 537M-91 Standard Specification for Pressure 
Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, 1991, into 
Sec.  179.100-7; 179.102-4; 179.102-17.
    (18) ASTM A 572-82 Standard Specification for High-Strength Low-
Alloy Columbian-Vanadium Steels of Structural Quality, 1982, into Sec.  
178.338-2.
    (19) ASTM A 588-81 Standard Specification for High-Strength Low-
Alloy Structural Steel with 50 Ksi Minimum Yield Point to 4 in. Thick, 
1981, into Sec.  178.338-2.
    (20) ASTM A 606-75 Standard Specification for Steel Sheet and Strip 
Hot-Rolled and Cold-Rolled, High-Strength, Low-Alloy, with Improved 
Atmospheric Corrosion Resistance, 1975 (Reapproved 1981), into Sec.  
178.338-2.
    (21) ASTM A 607-98 Standard Specification for Steel, Sheet and 
Strip, High-Strength, Low-Alloy, Columbium or Vanadium, or Both, Hot-
Rolled and Cold-Rolled, 1998, into Sec.  178.338-2.
    (22) ASTM A 612-72a High Strength Steel Plates for Pressure Vessels 
for Moderate and Lower Temperature Service, 1972, into Sec.  178.337-2.
    (23) ASTM A 633-79a Standard Specification for Normalized High-
Strength Low-Alloy Structural Steel, 1979 Edition, into Sec.  178.338-
2.
    (24) ASTM A 715-81 Standard Specification for Steel Sheet and 
Strip, Hot-Rolled, High-Strength, Low-Alloy with Improved Formability, 
1981, into Sec.  178.338-2.
    (25) ASTM A 1008/A 1008M-03 Standard Specification for Steel, 
Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and 
High Strength Low-Alloy with Improved Formability, 2003, into Sec.  
178.338-2; 178.345-2.
    (26) ASTM A 1011/A 1011M-03a Standard Specification for Steel, 
Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low 
Alloy

[[Page 1029]]

and High Strength Low-Alloy with Improved Formability, 2003, into Sec.  
178.338-2; 178.345-2.
    (27) ASTM B 162-93a Standard Specification for Nickel Plate, Sheet, 
and Strip, 1993, into Sec.  173.249; 179.200-7.
    (28) ASTM B 209-93 Standard Specification for Aluminum and 
Aluminum-Alloy Sheet and Plate, 1993, into Sec.  179.100-7; 179.200-7; 
179.220-7.
    (29) ASTM B 221-76 Aluminum Alloy Extruded Bars, Rods, Shapes, and 
Tubes, 1976, into Sec.  178.46.
    (30) ASTM B 557-84 Tension Testing Wrought and Cast Aluminum and 
Magnesium-Alloy Products, 1984, into Sec.  178.46.
    (31) ASTM B 580-79 Standard Specification for Anodic Oxide Coatings 
on Aluminum, (Re-approved 2000), into Sec.  173.316; 173.318; 178.338-
17.
    (32) ASTM D 56-05, Standard Test Method for Flash Point by Tag 
Closed Cup Tester, approved May 1, 2005, into Sec.  173.120.
    (33) ASTM D 86-07a, Standard Test Method for Distillation of 
Petroleum Products at Atmospheric Pressure, approved April 1, 2007, 
into Sec.  173.121.
    (34) ASTM D 93-08, Standard Test Methods for Flash Point by Pensky-
Martens Closed Cup Tester, approved October 15, 2008, into Sec.  
173.120.
    (35) ASTM D 1078-05, Standard Test Method for Distillation Range of 
Volatile Organic Liquids, approved May 15, 2005, into Sec.  173.121.
    (36) ASTM D 1238-90b Standard Test Method for Flow Rates of 
Thermoplastics for Extrusion Plastometer, 1990, into Sec.  173.225.
    (37) ASTM D 1709-01 Standard Test Methods for Impact Resistance of 
Plastic Film by the Free-Falling Dart Method, 2001, into Sec.  173.197.
    (38) ASTM D 1835-97 Standard Specification for Liquefied Petroleum 
(LP) Gases, 1997, into Sec.  180.209.
    (39) ASTM D 1838-64 Copper Strip Corrosion by Liquefied Petroleum 
(LP) Gases, 1964, into Sec.  173.315.
    (40) ASTM D 1922-00a Standard Test Method for Propogation Tear 
Resistance of Plastic Film and Thin Sheeting by Pendulum Method, 2000, 
into Sec.  173.197.
    (41) ASTM D 3278-96 (Reapproved 2004) E1, Standard Test Methods for 
Flash Point of Liquids by Small Scale Closed-Cup Apparatus, approved 
November 1, 2004, into Sec.  173.120.
    (42) ASTM D 3828-07a, Standard Test Methods for Flash Point by 
Small Scale Closed Cup Tester, approved July 15, 2007, Sec.  173.120.
    (43) ASTM D 4206-96 Standard Test Method for Sustained Burning of 
Liquid Mixtures Using the Small Scale Open-Cup Apparatus, 1996, into 
Sec.  173.120.
    (44) ASTM D 4359-90 Standard Test Method for Determining Whether a 
Material is a Liquid or a Solid, 1990 into Sec.  171.8.
    (45) ASTM E 8-99 Standard Test Methods for Tension Testing of 
Metallic Materials, 1999, into Sec.  178.36; 178.37; 178.38; 178.39; 
178.44; 178.45; 178.50; 178.51; 178.53; 178.55; 178.56; 178.57; 178.58; 
178.59; 178.60; 178.61; 178.68.
    (46) ASTM E 23-98 Standard Test Methods for Notched Bar Impact 
Testing of Metallic Materials, 1998, into Sec.  178.57.
    (47) ASTM E 112-88 Standard Test Methods for Determining Average 
Grain Size, 1988, into Sec.  178.44.
    (48) ASTM E 112-96 Standard Test Methods for Determining Average 
Grain Size, 1996 Edition, into Sec.  178.274; Part 178, appendix A.
    (49) ASTM E 114-95 Standard Practice for Ultrasonic Pulse-Echo 
Straight-Beam Examination by the Contact Method, 1995, into Sec.  
178.45.
    (50) ASTM E 213-98 Standard Practice for Ultrasonic Examination of 
Metal Pipe and Tubing, into Sec.  178.45.
    (51) ASTM E 290-97a Standard Test Methods for Bend Testing of 
Material for Ductility, published February 1998, into Sec.  178.37.
    (i) American Water Works Association, 1010 Vermont Avenue NW., 
Suite 810, Washington, DC 20005.
    (1) AWWA Standard C207-55, Steel Pipe Flanges, 1955, into Sec.  
178.360-4.
    (2) [Reserved]
    (j) American Welding Society, 550 NW. Le Jeune Road, Miami, Florida 
33126.
    (1) AWS Code B 3.0; Standard Qualification Procedure; 1972 (FRB 
3.0-41, rev. May 1973), into Sec. Sec.  178.356-2, 178.358-2.
    (2) AWS Code D 1.0; Code for Welding in Building Construction (FR D 
1.0-66, 1966), into Sec. Sec.  178.356-2; 178.358-2.
    (k) Association of American Railroads, American Railroads Building, 
50 F Street NW., Washington, DC 20001; telephone (877) 999-8824, http://www.aar.org/publications.com.
    (1) AAR Manual of Standards and Recommended Practices, Section C--
Part III, Specifications for Tank Cars, Specification M-1002, (AAR 
Specifications for Tank Cars), December 2000, Sec.  173.31; 179.6; 
179.7; 179.15; 179.16; 179.20; 179.22; 179.100-9; 179.100-10; 179.100-
12; 179.100-13; 179.100-14; 179.100-18; 179.101-1; 179.102-1; 179.102-
4; 179.102-17; 179.103-5; 179.200-7; 179.200-9; 179.200-10; 179.200-11; 
179.200-13; 179.200-17; 179.200-22; 179.201-6; 179.220-6; 179.220-7; 
179.220-10; 179.220-11; 179.220-14; 179.220-18; 179.220-26; 179.300-9; 
179.300-10; 179.300-15; 179.300-17; 179.400-5; 179.400-6; 179.400-8; 
179.400-11; 179.400-12; 179.400-15; 179.400-18; 179.400-20; 179.400-25; 
180.509; 180.513; 180.515; 180.517.
    (2) AAR Manual of Standards and Recommended Practices, Section I, 
Specially Equipped Freight Car and Intermodal Equipment, 1988, into 
Sec.  174.55; 174.63.
    (3) AAR Specifications for Design, Fabrication and Construction of 
Freight Cars, Volume 1, 1988, into Sec.  179.16.
    (4) AAR Standard 286; AAR Manual of Standards and Recommended 
Practices, Section C, Car Construction Fundamentals and Details, 
Standard S-286, Free/Unrestricted Interchange for 286,000 lb Gross Rail 
Load Cars (Adopted 2002; Revised: 2003, 2005, 2006), into 179.13.
    (l) Chlorine Institute, Inc., 1300 Wilson Boulevard, Arlington, VA 
22209.
    (1) Chlorine Institute Emergency Kit ``A'' for 100-lb. & 150 lb. 
Chlorine Cylinders (with the exception of repair method using Device 8 
for side leaks), Edition 10, June 2003, into 173.3.
    (2) Chlorine Institute Emergency Kit ``B'' for Chlorine Ton 
Containers (with the exception of repair method using Device 9 for side 
leaks), Edition 9, June 2003, into 173.3.
    (3) Type 1 JQ 225, Dwg., H51970, Revision F, November 1996, into 
Sec.  173.315.
    (4) Type 1 JQ 225, Dwg. H50155, Revision H, November 1996, into 
Sec.  173.315.
    (5) Section 3, Pamphlet 57, Emergency Shut-Off Systems for Bulk 
Transfer of Chlorine, Edition 4, October 2003, into Sec.  177.840.
    (6) Section 3, Pamphlet 166, Angle Valve Guidelines for Chlorine 
Bulk Transportation, 1st Edition, October 2002, into Sec.  178.337-9.
    (7) Standard Chlorine Angle Valve Assembly, Dwg. 104-8, July 1993, 
into Sec.  178.337-9.
    (8) Excess Flow Valve with Removable Seat, Dwg. 101-7, July 1993, 
into Sec.  178.337-8.
    (9) Excess Flow Valve with Removable Basket, Dwg. 106-6, July 1993, 
into Sec.  178.337-8.
    (10) Standards for Housing and Manway Covers for Steel Cargo Tanks, 
Dwgs. 137-1 and 137-2, September 1, 1982, into Sec.  178.337-10.
    (11) Typical Manway Arrangement Chlorine Cargo Tank, Dwg 137-5, 
November 1996, into 178.337-10.
    (m) Canadian General Standards Board, Place du Portage III, 6B1 11 
Laurier Street, Gatineau, Quebec, Canada K1A 1G6.
    (1) National Standard of Canada (CAN/CGSB 43.147--2005)

[[Page 1030]]

Construction, Modification, Qualification, Maintenance, and Selection 
and Use of Means of Containment for the Handling, Offering for 
Transport, or Transportation of Dangerous Goods by Rail, into Sec.  
171.12.
    (2) [Reserved]
    (n) Compressed Gas Association (CGA), 1235 Jefferson Davis Highway, 
Arlington, VA 22202.
    (1) CGA Pamphlet C-3, Standards for Welding on Thin-Walled Steel 
Cylinders, 1994, into Sec.  178.47; 178.50; 178.51; 178.53; 178.55; 
178.56; 178.57; 178.58; 178.59; 178.60; 178.61; 178.65; 178.68; 
180.211.
    (2) CGA C-5, Cylinder Service Life--Seamless Steel High Pressure 
Cylinders, 1991 (reaffirmed 1995), into Sec.  173.302a.
    (3) CGA Pamphlet C-6, Standards for Visual Inspection of Steel 
Compressed Gas Cylinders, 1993, into Sec.  173.3, 173.198, 180.205, 
180.209, 180.211, 180.411, 180.519.
    (4) CGA Pamphlet C-6.1, Standards for Visual Inspection of High 
Pressure Aluminum Compressed Gas Cylinders, 2002, Fourth Edition, into 
Sec.  180.205; 180.209.
    (5) CGA Pamphlet C-6.2, Guidelines for Visual Inspection and 
Requalification of Fiber Reinforced High Pressure Cylinders, 1996, 
Third Edition, into Sec.  180.205.
    (6) CGA Pamphlet C-6.3, Guidelines for Visual Inspection and 
Requalification of Low Pressure Aluminum Compressed Gas Cylinders, 
1991, into Sec.  180.205; 180.209.
    (7) CGA C-7, Guide to Preparation of Precautionary Labeling and 
Marking of Compressed Gas Containers, Appendix A, issued 2004 (8th 
Edition), into Sec.  172.400a.
    (8) CGA Pamphlet C-8, Standard for Requalification of DOT-3HT 
Cylinder Design, 1985, into Sec.  180.205; 180.209.
    (9) CGA Pamphlet C-11, Recommended Practices for Inspection of 
Compressed Gas Cylinders at Time of Manufacture, 2001, Third Edition, 
into Sec.  178.35.
    (10) CGA Pamphlet C-12, Qualification Procedure for Acetylene 
Cylinder Design, 1994, into Sec.  173.301; 173.303; 178.59; 178.60.
    (11) CGA Pamphlet C-13, Guidelines for Periodic Visual Inspection 
and Requalification of Acetylene Cylinders, 2000, Fourth Edition, into 
Sec.  173.303; 180.205; 180.209.
    (12) CGA Pamphlet C-14, Procedures for Fire Testing of DOT Cylinder 
Pressure Relief Device Systems, 1979, into Sec.  173.301; 173.323.
    (13) CGA Pamphlet G-2.2, Guideline Method for Determining Minimum 
of 0.2% Water in Anhydrous Ammonia, 1985, Second Edition, Reaffirmed 
1997, into Sec.  173.315.
    (14) CGA Pamphlet G-4.1, Cleaning Equipment for Oxygen Service, 
1985, into Sec.  178.338-15.
    (15) CGA Pamphlet P-20, Standard for the Classification of Toxic 
Gas Mixtures, 1995, into Sec.  173.115.
    (16) CGA Pamphlet P-20, Standard for the Classification of Toxic 
Gas Mixtures, 2003, Third Edition, into Sec.  173.115.
    (17) CGA S-1.1, Pressure Relief Device Standards--Part 1--Cylinders 
for Compressed Gases, (with the exception of paragraph 9.1.1.1), 
Twelfth Edition, 2005, into Sec.  173.301, 173.304a 178.75.
    (18) CGA Pamphlet S-1.2, Safety Relief Device Standards Part 2--
Cargo and Portable Tanks for Compressed Gases, 1980, into Sec.  
173.315; 173.318; 178.276; 178.277.
    (19) CGA S-7, Method for Selecting Pressure Relief Devices for 
Compressed Gas Mixtures in Cylinders, 2005, into Sec.  173.301.
    (20) CGA Technical Bulletin TB-2, Guidelines for Inspection and 
Repair of MC-330 and MC-331 Cargo Tanks, 1980, into Sec.  180.407; 
180.413.
    (21) CGA Technical Bulletin TB-25, Design Considerations for Tube 
Trailers, 2008 Edition, into Sec.  173.301.
    (o) Department of Defense (DOD), 2461 Eisenhower Avenue, 
Alexandria, VA 22331.
    (1) DOD TB 700-2; NAVSEAINST 8020.8B; AFTO 11A-1-47; DLAR 8220.1: 
Explosives Hazard Classification Procedures, January 1998, into Sec.  
173.56.
    (2) Packaging of Hazardous Material, DLAD 4145.41/AR 700-143/AFJI 
24-210/NAVSUPINST 4030.55B/MCO 4030.40B, January 14, 2000, into Sec.  
173.7
    (p) Department of Energy (USDOE), 100 Independence Avenue SW., 
Washington, DC 20545. USDOE publications available from: Superintendent 
of Documents, Government Printing Office (GPO) or The National 
Technical Information Service (NTIS).
    (1) USDOE, CAPE-1662, Revision 1, and Supplement 1, Civilian 
Application Program Engineering Drawings, April 6, 1988, into 
Sec. Sec.  178.356-1; 178.356-2; 178.358-1; 178.358-2; 178.358-3; 
178.358-4.
    (2) USDOE, Material and Equipment Specification No. SP-9, Rev. 1, 
and Supplement--Fire Resistant Phenolic Foam, March 28, 1968, into 
Sec. Sec.  178.356-2; 178.358-2.
    (3) USDOE, KSS-471,--Proposal for Modifications to U.S. Department 
of Transportation Specification 21PF-1, Fire and Shock Resistant 
Phenolic Foam--Insulated Metal Overpack, November 30, 1986, into Sec.  
178.358-1; 178.358-3.
    (q) General Services Administration, Specification Office, Room 
6662, 7th and D Street, S.W., Washington, DC 20407.
    (1) Federal Specification RR-C-901D, Cylinders, Compressed Gas: 
Seamless Shatterproof, High Pressure DOT 3AA Steel, and 3AL Aluminum, 
February 21, 2003, into Sec. Sec.  173.302; 173.336; 173.337.
    (2) [Reserved]
    (r) Institute of Makers of Explosives, 1120 19th Street NW., Suite 
310, Washington, DC 20036-3605.
    (1) IME Standard 22,IME Safety Library Publication No. 22, 
Recommendations for the Safe Transportation of Detonators in a Vehicle 
with Certain Other Explosive Materials, February 2007, into Sec. Sec.  
173.63; 177.835.
    (2) [Reserved]
    (s) International Atomic Energy Agency (IAEA), P.O. Box 100, 
Wagramer Strasse 5, A-1400 Vienna, Austria. Also available from: Bernan 
Associates, 4611-F Assembly Drive, Lanham, MD 20706-4391, USA; or 
Renouf Publishing Company, Ltd., 812 Proctor Avenue, Ogdensburg, New 
York 13669, USA.
    (1) No. TS-R-1 (ST-1, Revised), Regulations for the Safe Transport 
of Radioactive Material, (IAEA Regulations), 1996 Edition (Revised), 
into Sec.  171.22; 171.23; 171.26, 173.415, 173.416, 173.417, 173.473.
    (2) [Reserved]
    (t) International Civil Aviation Organization (``ICAO''), 999 
University Street, Montr[eacute]al, Quebec H3C 5H7, Canada, 1-514-954-
8219, http://www.icao.int. ICAO Technical Instructions available from: 
INTEREG, International Regulations, Publishing and Distribution 
Organization, P.O. Box 60105, Chicago, IL 60660.
    (1) Technical Instructions for the Safe Transport of Dangerous 
Goods by Air (ICAO Technical Instructions), 2013-2014 Edition, into 
Sec. Sec.  171.8; 171.22; 171.23; 171.24; 172.101; 172.202; 172.401; 
172.512; 172.519; 172.602; 173.56; 173.320; 175.10, 175.33; 178.3.
    (2) [Reserved]
    (u) International Electrotechnical Commission (IEC), 3 rue de 
Varemb[eacute], P.O. Box 131, CH--1211, GENEVA 20, Switzerland.
    (1) IEC 62282-6-100:2010(E), Fuel cell technologies--Part 6-100: 
Micro fuel cell power systems--Safety, Edition 1.0, March 2010, into 
Sec. Sec.  173.230; 175.10.
    (2) 62282-6-100 Amend. 1 IEC 2012(E), Amendment 1 to IEC 62282-6-
100: Fuel cell technologies--Part 6-100: Micro fuel cell power 
systems--Safety,

[[Page 1031]]

Edition 1.0, October 2012, into Sec. Sec.  173.230; 175.10
    (v) International Maritime Organization (``IMO''), 4 Albert 
Embankment, London, SE1 7SR, United Kingdom or New York Nautical 
Instrument & Service Corporation, 140 West Broadway, New York, NY 
10013, +44 (0) 20 7735 7611, http://www.imo.org.
    (1) International Convention for the Safety of Life at Sea, 1974, 
Consolidated Edition (SOLAS), Chapter II-2, Construction--Fire 
protection, fire detection and fire extinction, Regulation 19, Carriage 
of dangerous goods, Fifth Edition 2009, into Sec. Sec.  176.63, 176.84.
    (2) International Maritime Dangerous Goods Code (IMDG Code), 
Incorporating Amendment 36-12 (English Edition), 2011, into Sec. Sec.  
171.22; 171.23; 171.25; 172.101 172.202; 172.203 172.401; 172.502; 
172.519; 172.602; 173.21; 173.56; 176.2; 176.5; 176.11; 176.27; 176.30; 
176.83; 176.84; 176.140; 176.720; 178.3; 178.274.
    (w) International Organization for Standardization, Case Postale 
56, CH-1211, Geneve 20, Switzerland, http://www.iso.org. Also available 
from: ANSI 25, West 43rd Street, New York, NY 10036, 1-212-642-4900, 
http://www.ansi.org.
    (1) ISO 535-1991(E) Paper and board--Determination of water 
absorptiveness--Cobb method, 1991, into Sec.  178.516; 178.707; 
178.708.
    (2) ISO 1496-1: 1990 (E)--Series 1 freight containers--
Specification and testing, Part 1: General cargo containers. Fifth 
Edition, (August 15, 1990), into Sec.  173.411.
    (3) ISO 1496-3(E)--Series 1 freight containers--Specification and 
testing--Part 3: Tank containers for liquids, gases and pressurized dry 
bulk, Fourth edition, March 1995, into Sec.  178.74; 178.75; 178.274.
    (4) ISO 1516:2002(E), Determination of flash/no flash--Closed cup 
equilibrium method, Third Edition, 2002-03-01, into Sec.  173.120.
    (5) ISO 1523:2002(E), Determination of flash point--Closed cup 
equilibrium method, Third Edition, 2002-03-01, into Sec.  173.120.
    (6) ISO 2431-1984(E) Standard Cup Method, 1984, into Sec.  173.121.
    (7) ISO 2592:2000(E), Determination of flash and fire points--
Cleveland open cup method, Second Edition, 2000-09-15, into Sec.  
173.120.
    (8) ISO 2719:2002(E), Determination of flash point--Pensky-Martens 
closed cup method, Third Edition, 2002-11-15, into Sec.  173.120.
    (9) ISO 2919-1980(E) Sealed radioactive sources--Classification, 
1980, into Sec.  173.469.
    (10) ISO 3036-1975(E) Board--Determination of puncture resistance, 
1975, into Sec.  178.708.
    (11) ISO 3405:2000(E), Petroleum products--Determination of 
distillation characteristics at atmospheric pressure, Third Edition, 
2000-03-01, into Sec.  173.121.
    (12) ISO 3574-1986(E) Cold-reduced carbon steel sheet of commercial 
and drawing qualities, into Sec.  178.503; Part 178, appendix C.
    (13) ISO 3679:2004(E), Determination of flash point--Rapid 
equilibrium closed cup method, Third Edition, 2004-04-01, into Sec.  
173.120.
    (14) ISO 3680:2004(E), Determination of flash/no flash--Rapid 
equilibrium closed cup method, Fourth Edition, 2004-04-01, into Sec.  
173.120.
    (15) ISO 3807-2(E), Cylinders for acetylene--Basic requirements--
Part 2: Cylinders with fusible plugs, First edition, March 2000, into 
Sec. Sec.  173.303; 178.71.
    (16) ISO 3924:1999(E), Petroleum products--Determination of boiling 
range distribution--Gas chromatography method, Second Edition, 1999-08-
01, into Sec.  173.121.
    (17) ISO 4126-1:2004(E): Safety devices for protection against 
excessive pressure--Part 1: Safety valves, Second edition 2004-02-15, 
into Sec.  178.274.
    (18) ISO 4126-7:2004(E): Safety devices for protection against 
excessive pressure--Part 7: Common data, First Edition 2004-02-15 into 
Sec.  178.274.
    (19) ISO 4126-7:2004/Cor.1:2006(E): Safety devices for protection 
against excessive pressure--Part 7: Common data, Technical Corrigendum 
1, 2006-11-01, into Sec.  178.274.
    (20) ISO 4626:1980(E), Volatile organic liquids--Determination of 
boiling range of organic solvents used as raw materials, First Edition, 
1980-03-01, into Sec.  173.121.
    (21) ISO 4706:2008(E), Gas cylinders--Refillable welded steel 
cylinders--Test pressure 60 bar and below, First Edition, 2008-04-15, 
Corrected Version, 2008-07-01, into Sec.  178.71.
    (22) ISO 6406(E), Gas cylinders--Seamless steel gas cylinders--
Periodic inspection and testing, Second edition, February 2005, into 
Sec.  180.207.
    (23) ISO 6892 Metallic materials--Tensile testing, July 15, 1984, 
First Edition, into Sec.  178.274.
    (24) ISO 7225(E), Gas cylinders--Precautionary labels, Second 
Edition, July 2005, into Sec.  178.71.
    (25) ISO 7866(E), Gas cylinders--Refillable seamless aluminum alloy 
gas cylinders--Design, construction and testing, First edition, June 
1999, into Sec.  178.71.
    (26) ISO 8115 Cotton bales--Dimensions and density, 1986 Edition, 
into Sec.  172.102.
    (27) ISO 9809-1(E): Gas cylinders--Refillable seamless steel gas 
cylinders--Design, construction and testing--Part 1: Quenched and 
tempered steel cylinders with tensile strength less than 1100 MPa., 
First edition, June 1999, into Sec. Sec.  178.71; 178.75.
    (28) ISO 9809-2(E): Gas cylinders--Refillable seamless steel gas 
cylinders--Design, construction and testing--Part 2: Quenched and 
tempered steel cylinders with tensile strength greater than or equal to 
1100 MPa., First edition, June 2000, into Sec. Sec.  178.71; 178.75.
    (29) ISO 9809-3 (E): Gas cylinders--Refillable seamless steel gas 
cylinders--Design, construction and testing--Part 3: Normalized steel 
cylinders, First edition, December 2000, into Sec. Sec.  178.71; 
178.75.
    (30) ISO 9978:1992(E)--Radiation protection--Sealed radioactive 
sources--Leakage test methods. First Edition, (February 15, 1992), into 
Sec.  173.469.
    (31) ISO 10156:2010(E): Gases and gas mixtures--Determination of 
fire potential and oxidizing ability for the selection of cylinder 
valve outlets, Third edition, 2010-04-01, into Sec.  173.115.
    (32) ISO 10156:2010/Cor.1:2010(E): Gases and gas mixtures--
Determination of fire potential and oxidizing ability for the selection 
of cylinder valve outlets, Technical Corrigendum 1, 2010-09-01, into 
Sec.  173.115.
    (33) ISO 10297:2006(E), Transportable gas cylinders--Cylinder 
valves--Specification and type testing, Second Edition, 2006-01-15, 
into Sec.  173.301b; 178.71.
    (34) ISO 10461:2005(E), Gas cylinders--Seamless aluminum-alloy gas 
cylinders--Periodic inspection and testing, Second Edition, 2005-02-15 
and Amendment 1, 2006-07-15, into Sec.  180.207.
    (35) ISO 10462 (E), Gas cylinders--Transportable cylinders for 
dissolved acetylene--Periodic inspection and maintenance, Second 
edition, February 2005, into Sec.  180.207.
    (36) ISO 10692-2:2001(E), Gas cylinders--Gas cylinder valve 
connections for use in the micro-electronics industry--Part 2: 
Specification and type testing for valve to cylinder connections, First 
Edition, 2001-08-01, into Sec.  173.40.
    (37) ISO 11114-1(E), Transportable gas cylinders--Compatibility of 
cylinder and valve materials with gas contents--Part 1: Metallic 
materials, First edition, October 1997, into Sec. Sec.  173.301b; 
178.71.

[[Page 1032]]

    (38) ISO 11114-2(E), Transportable gas cylinders--Compatibility of 
cylinder and valve materials with gas contents--Part 2: Non-metallic 
materials, First edition, December 2000, into Sec. Sec.  173.301b; 
178.71.
    (39) ISO 11117:2008(E): Gas cylinders--Valve protection caps and 
valve guards--Design, construction and tests, Second edition, 2008-09-
01, into Sec.  173.301b.
    (40) ISO 11117:2008/Cor.1:2009(E): Gas cylinders--Valve protection 
caps and valve guards--Design, construction and tests, Technical 
Corrigendum 1, 2009-05-01, into Sec.  173.301b.
    (41) ISO 11118(E), Gas cylinders--Non-refillable metallic gas 
cylinders--Specification and test methods, First edition, October 1999, 
into Sec.  178.71.
    (42) ISO 11119-1(E), Gas cylinders--Gas cylinders of composite 
construction--Specification and test methods--Part 1: Hoop-wrapped 
composite gas cylinders, First edition, May 2002, into Sec.  178.71.
    (43) ISO 11119-2(E), Gas cylinders--Gas cylinders of composite 
construction--Specification and test methods--Part 2: Fully wrapped 
fibre reinforced composite gas cylinders with load-sharing metal 
liners, First edition, May 2002, into Sec.  178.71.
    (44) ISO 11119-3(E), Gas cylinders of composite construction--
Specification and test methods--Part 3: Fully wrapped fibre reinforced 
composite gas cylinders with non-load-sharing metallic or non-metallic 
liners, First edition, September 2002, into Sec.  178.71.
    (45) ISO 11120(E), Gas cylinders--Refillable seamless steel tubes 
of water capacity between 150 L and 3000 L--Design, construction and 
testing, First edition, March 1999, into Sec. Sec.  178.71; 178.75.
    (46) ISO 11621(E), Gas cylinders--Procedures for change of gas 
service, First edition, April 1997, into Sec. Sec.  173.302, 173.336, 
173.337.
    (47) ISO 11623(E), Transportable gas cylinders--Periodic inspection 
and testing of composite gas cylinders, First edition, March 2002, into 
Sec.  180.207.
    (48) ISO 13340:2001(E) Transportable gas cylinders--Cylinder valves 
for non-refillable cylinders--Specification and prototype testing, 
First edition, 2004-04-01, into Sec. Sec.  173.301b; 178.71.
    (49) ISO 13736:2008(E), Determination of flash point--Abel closed-
cup method, Second Edition, 2008-09-15, into Sec.  173.120.
    (50) ISO 16111:2008(E), Transportable gas storage devices--Hydrogen 
absorbed in reversible metal hydride, First Edition, 2008-11-15, into 
Sec. Sec.  173.301b; 173.311; 178.71.
    (51) ISO 18172-1:2007(E), Gas cylinders--Refillable welded 
stainless steel cylinders--Part 1: Test pressure 6 MPa and below, First 
Edition, 2007-03-01, into Sec.  178.71.
    (52) ISO 20703:2006(E), Gas cylinders--Refillable welded aluminum-
alloy cylinders--Design, construction and testing, First Edition, 2006-
05-01, into Sec.  178.71.
    (x) National Board of Boiler and Pressure Vessel Inspectors, 1055 
Crupper Avenue, Columbus, Ohio 43229.
    (1) NB-23, National Board Inspection Code, A Manual for Boiler and 
Pressure Vessel Inspectors, 1992 Edition, into Sec.  180.413.
    (2) [Reserved]
    (y) National Fire Protection Association, 1 Batterymarch Park, 
Quincy, MA, 02169-7471 1-617-770-3000, http://www.nfpa.org.
    (1) NFPA 58-Liquefied Petroleum Gas Code, 2001 Edition, into 
Sec. Sec.  173.5, 173.315.
    (2) NFPA 498-Standards for Safe Havens and Interchange Lots for 
Vehicles Transporting Explosives, 2010 Edition, into Sec.  177.835.
    (z) National Institute of Standards and Technology, Department of 
Commerce, 5285 Port Royal Road, Springfield, VA 22151.
    (1) USDC, NBS Handbook H-28 (1957), 1957 Handbook of Screw-Thread 
Standards for Federal Services, December 1966 Edition, into Sec. Sec.  
179.2; 178.45; 178.46.
    (2) [Reserved]
    (aa) Organization for Economic Cooperation and Development (OECD), 
OECD Publications and Information Center, 2001 L Street, N.W., Suite 
700, Washington, DC 20036.
    (1) Test No. 404: Acute Dermal Irritation/Corrosion, OECD 
Guidelines for the Testing of Chemicals, Section 4: Health Effects, 
adopted April 24, 2002, into Sec.  173.137.
    (2) Test No. 430: In VitroSkin Corrosion: Transcutaneous Electrical 
Resistance Test (TER), OECD Guidelines for the Testing of Chemicals, 
Section 4: Health Effects, adopted April 13, 2004, into Sec.  173.137.
    (3) OECD (2004), Test No. 431: In VitroSkin Corrosion: Human Skin 
Model Test, OECD Guidelines for the Testing of Chemicals, Section 4: 
Health Effects, OECD Publishing, adopted April 13, 2004, into Sec.  
173.137.
    (4) Test No. 435: In VitroMembrane Barrier Test Method for Skin 
Corrosion, OECD Guidelines for the Testing of Chemicals, Section 4: 
Health Effects, adopted July 19, 2006, into Sec.  173.137.
    (bb) Transport Canada, TDG Canadian Government Publishing Center, 
Supply and Services, Canada, Ottawa, Ontario, Canada K1A 059, 416-973-
1868, http://www.tc.gc.ca.
    (1) Transportation of Dangerous Goods Regulations (Transport Canada 
TDG Regulations), into Sec. Sec.  171.12; 171.22; 171.23; 172.401; 
172.502; 172.519; 172.602; 173.31; 173.32; 173.33.
    (i) SOR 2001-286, including Clear Language Amendments, August 2001.
    (ii) SOR/2002-306 August 8, 2002.
    (iii) SOR/2003-273 July 24, 2003
    (iv) SOR/2003-400 December 3, 2003
    (v) SOR/2005-216 July 13, 2005
    (vi) SOR/2005-279 September 21, 2005
    (vii) SOR/2008-34 February 7, 2008
    (viii) SOR/2007-179 July 31, 2007
    (2) [Reserved]
    (cc) Truck Trailer Manufacturers Association, 1020 Princess Street, 
Alexandria, Virginia 22314.
    (1) TTMA RP No. 61-98, Performance of manhole and/or Fill Opening 
Assemblies on MC 306, DOT 406, Non-ASME MC 312 and Non-ASME DOT 412 
Cargo Tanks, June 1, 1998, into Sec.  180.405.
    (2) TTMA RP No. 81-97, Performance of Spring Loaded Pressure Relief 
Valves on MC 306, MC 307, MC 312, DOT 406, DOT 407, and DOT 412 Tanks, 
July 1, 1997 Edition, into Sec. Sec.  178.345-10; 178.346-3.
    (3) TTMA TB No. 107, Procedure for Testing In-Service Unmarked and/
or Uncertified MC 306 and Non-ASME MC 312 Type Cargo Tank Manhole 
Covers, June 1, 1998 Edition, into Sec.  180.405.
    (dd) United Nations, Publications, 2 United Nations Plaza, Room 
DC2-853, New York, NY 10017, 1-212-963-8302, http://unp.un.org.
    (1) UN Recommendations on the Transport of Dangerous Goods, Model 
Regulations (UN Recommendations), 17th revised edition, Volumes I and 
II (2011), into Sec. Sec.  171.8; 171.12; 172.202; 172.401; 172.407; 
172.502; 173.22; 173.24; 173.24b; 173.40; 173.56; 173.192; 173.302b; 
173.304b; 178.75; 178.274.
    (2) UN Recommendations on the Transport of Dangerous Goods, Manual 
of Tests and Criteria, fifth revised edition, amendment 1 (2011) 
(Manual of Tests and Criteria), into Sec. Sec.  172.102; 173.21; 
173.56; 173.57; 173.58; 173.60; 173.115; 173.124; 173.125; 173.127; 
173.128; 173.137; 173.185; 173.220; Part 173, appendix H; 178.274.
    (ee) United States Enrichment Corporation, Inc. (USEC), USEC Inc., 
6903 Rockledge Drive, Bethesda, MD 20817.
    (1) USEC-651--Good Handling Practices for Uranium Hexafluoride, 
Revision 8, January 1999, into Sec.  173.417.

[[Page 1033]]

    (2) [Reserved]

    Table 1 to 49 CFR 171.7--Materials Not Incorporated by Reference
------------------------------------------------------------------------
        Source and name of material                49 CFR reference
------------------------------------------------------------------------
American Biological Safety Association 1202  ...........................
 Allanson Road, Mundelein, IL 60060:
    Risk Group Classification for            173.134.
     Infectious Agents, 1998.
American Institute of Chemical Engineers     ...........................
 (AIChE), 3 Park Avenue New York, NY 10016-
 5991:
    Process Safety Progress Journal, Vol.    Note to Sec.   173.
     21, No. 2, Example of a Test Method      225(h)(3)(vi).
     for Venting Sizing: OPPSD/SPI
     Methodology.
American Society for Testing and Materials,  ...........................
 100 Barr Harbor Drive, West Conshohocken,
 PA 19428 (Noncurrent ASTM Standards are
 available from: Engineering Societies
 Library, 354 East 47th Street, New York,
 NY 10017):
    ASTM E 380-89 Standards for Metric       171.10
     Practice.
Association of American Railroads, American  ...........................
 Railroads Building, 50 F Street, NW.,
 Washington, DC 20001:
    AAR Catalog Nos. SE60CHT; SE60CC;        179.14
     SE60CHTE; SE60CE; SE60DC; SE60DE.
    AAR Catalog Nos. SE67CC; SE67CE;         179.14
     SE67BHT; SE67BC; SE67BHTE; SE67BE.
    AAR Catalog Nos. SE68BHT; SE68BC;        179.14
     SE68BHTE; SE68BE.
    AAR Catalog Nos. SE69AHTE; SE69AE......  179.14
    AAR Catalog Nos. SF70CHT; SF70CC;        179.14
     SF70CHTE; SF70CE.
    AAR Catalog Nos. SF73AC; SF73AE;         179.14
     SF73AHT; SF73AHTE.
    AAR Catalog Nos. SF79CHT; SF79CC;        179.14
     SF79CHTE; SF79CE.
Bureau of Explosives, Hazardous Materials    ...........................
 Systems (BOE), Association of American
 Railroads, American Railroads Building, 50
 F Street NW., Washington, DC 20001:
    Fetterley's Formula (The Determination   173.315
     of the Relief Dimensions for Safety
     Valves on Containers in which
     Liquefied gas is charged and when the
     exterior surface of the container is
     exposed to a temperature of 1,200
     [deg]F.).
    Intermodal Loading Guide for Products    174.55; 174.101; 174.112;
     in Closed Trailers and Containers,       174.115.
     issued June 2001.
    Pamphlet 6, Illustrating Methods for     174.55; 174.101; 174.112;
     Loading and Bracing Carload and Less-    174.115; 174.290.
     Than-Carload Shipments of Explosives
     and Other Dangerous Articles, 1962.
    Pamphlet 6A (includes appendix No. 1,    174.101; 174.290
     October 1944 and appendix 2, December
     1945), Illustrating Methods for
     Loading and Bracing Carload and Less-
     Than-Carload Shipments of Loaded
     Projectiles, Loaded Bombs, etc., 1943.
    Pamphlet 6C, Illustrating Methods for    174.55; 174.63; 174.101;
     Loading and Bracing Trailers and Less-   174.112; 174.115
     Than-Trailer Shipments of Explosives
     and Other Dangerous Articles Via
     Trailer-on-Flatcar (TOFC) or Container-
     on-Flatcar (COFC), 1985.
    Emergency Handling of Hazardous          171.7
     Materials in Surface Transportation,
     1989.
Centers for Disease Control and Prevention   ...........................
 1600 Clifton Road, Atlanta, GA 30333:
    Biosafety in Microbiological and         173.134
     Biomedical Laboratories, Fourth
     Edition, April 1999.
Compressed Gas Association, Inc., 4221       ...........................
 Walney Road, 5th Floor, Chantilly,
 Virginia 20151:
    CGA C-1.1, Personnel Training and        180.209
     Certification Guidelines for Cylinder
     Requalification By the Volumetric
     Expansion Method, 2004, First Edition.
National Institutes of Health Bethesda, MD   ...........................
 20892:
    NIH Guidelines for Research Involving    173.134
     Recombinant DNA Molecules (NIH
     Guidelines), January 2001, Appendix B.
Pantone Incorporated 590 Commerce            ...........................
 Boulevard, Carlstadt, New Jersey 07072-
 3098:
    Pantone [supreg]Formula guide coated/    172.407, 172.519
     uncoated, Second Edition 2004.
Society of Plastics Industries, Inc.,        ...........................
 Organic Peroxide Producers Safety
 Division, 1275 K Street NW., Suite 400,
 Washington, DC 20005:
    Self Accelerating Decomposition          173.21
     Temperature Test, 1972.
Truck Trailer Manufacturers Association,     ...........................
 1020 Princess Street, Alexandria, Virginia
 22314, telephone (703) 549-3010, http://www.ttmanet.org:
    TTMA RP No. 96-01, TTMA RP No. 96-01,    178.345-3
     Structural Integrity of DOT 406, DOT
     407, and DOT 412 Cylindrical Cargo
     Tanks, January 2001 Edition.
------------------------------------------------------------------------


0
3. In Sec.  171.8, the definition of ``Flexible bulk container'' is 
added in alphabetical order to read as follows:


Sec.  171.8  Definitions and abbreviations.

* * * * *
    Flexible bulk container means a flexible container with a capacity 
not exceeding 15 cubic meters and includes liners and attached handling 
devices and service equipment.
* * * * *

PART 172--HAZARDOUS MATERIALS TABLE, SPECIAL PROVISIONS, HAZARDOUS 
MATERIALS COMMUNICATIONS, EMERGENCY RESPONSE INFORMATION, AND 
TRAINING REQUIREMENTS

0
4. The authority citation for part 172 continues to read as follows:

    Authority:  49 U.S.C. 5101-5128; 44701; 49 CFR 1.53.


0
5. In Sec.  172.101:
0
a. Paragraph (c)(10)(i) introductory text is revised;
0
b. The first sentence in paragraph (c)(10)(iii) is revised;
0
c. Paragraph (k) is revised; and
0
d. The Hazardous Materials Table is amended by removing the entries 
under ``[REMOVE]'', by adding the entries under ``[ADD]'', and revising 
entries under ``[REVISE]'' in the appropriate alphabetical sequence.
    The revisions and additions read as follows:


Sec.  172.101  Purpose and use of hazardous materials table.

* * * * *
    (c) * * *

[[Page 1034]]

    (10) Mixtures and solutions. (i) A mixture or solution meeting the 
definition of one or more hazard class that is not identified 
specifically by name, comprised of a single predominant hazardous 
material identified in the Table by technical name and one or more 
hazardous and/or non-hazardous material, must be described using the 
proper shipping name of the hazardous material and the qualifying word 
``mixture'' or ``solution'', as appropriate, unless--
* * * * *
    (iii) A mixture or solution meeting the definition of one or more 
hazard class that is not identified in the Table specifically by name, 
comprised of two or more hazardous materials in the same hazard class, 
must be described using an appropriate shipping description (e.g., 
``Flammable liquid, n.o.s.''). * * *
* * * * *
    (k) Column 10: Vessel stowage requirements. Column 10A [Vessel 
stowage] specifies the authorized stowage locations on board cargo and 
passenger vessels. Column 10B [Other provisions] specifies codes for 
stowage requirements for specific hazardous materials. Hazardous 
materials offered for transportation as limited quantities are 
allocated stowage category A and are not subject to the stowage codes 
assigned by column 10B. The meaning of each code in Column 10B is set 
forth in Sec.  176.84 of this subchapter. Section 176.63 of this 
subchapter sets forth the physical requirements for each of the 
authorized locations listed in Column 10A. (For bulk transportation by 
vessel, see 46 CFR parts 30 to 40, 70, 98, 148, 151, 153 and 154.) The 
authorized stowage locations specified in Column 10A are defined as 
follows:
    (1) Stowage category ``A'' means the material may be stowed ``on 
deck'' or ``under deck'' on a cargo vessel or on a passenger vessel.
    (2) Stowage category ``B'' means--
    (i) The material may be stowed ``on deck'' or ``under deck'' on a 
cargo vessel and on a passenger vessel carrying a number of passengers 
limited to not more than the larger of 25 passengers, or one passenger 
per each 3 m of overall vessel length; and
    (ii) ``On deck only'' on passenger vessels in which the number of 
passengers specified in paragraph (k)(2)(i) of this section is 
exceeded.
    (3) Stowage category ``C'' means the material must be stowed ``on 
deck only'' on a cargo vessel or on a passenger vessel.
    (4) Stowage category ``D'' means the material must be stowed ``on 
deck only'' on a cargo vessel or on a passenger vessel carrying a 
number of passengers limited to not more than the larger of 25 
passengers or one passenger per each 3 m of overall vessel length, but 
the material is prohibited on a passenger vessel in which the limiting 
number of passengers is exceeded.
    (5) Stowage category ``E'' means the material may be stowed ``on 
deck'' or ``under deck'' on a cargo vessel or on a passenger vessel 
carrying a number of passengers limited to not more than the larger of 
25 passengers, or one passenger per each 3 m of overall vessel length, 
but is prohibited from carriage on a passenger vessel in which the 
limiting number of passengers is exceeded.
    (6) Stowage category ``01'' means the material may be stowed ``on 
deck'' in closed cargo transport units or ``under deck'' on a cargo 
vessel (up to 12 passengers) or on a passenger vessel.
    (7) Stowage category ``02'' means the material may be stowed ``on 
deck'' in closed cargo transport units or ``under deck'' on a cargo 
vessel (up to 12 passengers) or ``on deck'' in closed cargo transport 
units or ``under deck'' in closed cargo transport units on a passenger 
vessel.
    (8) Stowage category ``03'' means the material may be stowed ``on 
deck'' in closed cargo transport units or ``under deck'' on a cargo 
vessel (up to 12 passengers) but the material is prohibited on a 
passenger vessel.
    (9) Stowage category ``04'' means the material may be stowed ``on 
deck'' in closed cargo transport units or ``under deck'' in closed 
cargo transports on a cargo vessel (up to 12 passengers) but the 
material is prohibited on a passenger vessel.
    (10) Stowage category ``05'' means the material may be stowed ``on 
deck'' in closed cargo transport units on a cargo vessel (up to 12 
passengers) but the material is prohibited on a passenger vessel.
* * * * *


Sec.  172.101  Hazardous Materials Table

[[Page 1035]]



----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
                                                                                                                                                (8)                                     (9)                            (10)
                          Hazardous                                                                                      ---------------------------------------------------------------------------------------------------------------
                          materials        Hazard                                                           Special                 Packaging (Sec.   173.***)            Quantity limitations (see Sec.          Vessel stowage
      Symbols         descriptions and    class or    Identification         PG          Label codes    provisions (Sec. ------------------------------------------------    Sec.   173.27 and 175.75)   -------------------------------
                       proper shipping    division         Nos.                                             172.102)                                                     --------------------------------
                            names                                                                                           Exceptions       Non-bulk          Bulk          Passenger    Cargo aircraft     Location          Other
                                                                                                                                                                           aircraft/rail       only
(1)                  (2)...............        (3)  (4)..............  (5)...........  (6)...........  (7)..............  (8A)..........  (8B)..........  (8C)..........  (9A)..........  (9B)..........  (10A).........  (10B)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
                     [REMOVE]
 
                                                                                                              * * * * * * *
                     Aerosols, poison,         2.2  UN1950...........  ..............  2.2, 6.1......  .................  306...........  None..........  None..........  Forbidden.....  Forbidden.....  A.............  48, 87, 126
                      Packing Group III
                      (each not
                      exceeding 1 L
                      capacity).
                     Aerosols,                 2.1  UN1950...........  ..............  2.1...........  N82..............  306...........  None..........  None..........  75 kg.........  150 kg........  A.............  48, 87, 126
                      flammable, (each
                      not exceeding 1 L
                      capacity).
                     Aerosols,                 2.1  UN1950...........  ..............  2.1...........  N82..............  306...........  304...........  None..........  Forbidden.....  150 kg........  A.............  48, 87, 126
                      flammable, n.o.s.
                      (engine starting
                      fluid) (each not
                      exceeding 1 L
                      capacity).
                     Aerosols, non-            2.2  UN1950...........  ..............  2.2...........  .................  306...........  None..........  None..........  75 kg.........  150 kg........  A.............  48, 87, 126
                      flammable, (each
                      not exceeding 1 L
                      capacity).
                     Aerosols, poison,         2.2  UN1950...........  ..............  2.2, 6.1......  .................  306...........  None..........  None..........  Forbidden.....  Forbidden.....  A.............  48, 87, 126
                      (each not
                      exceeding 1 L
                      capacity).
 
                                                                                                              * * * * * * *
                     Amyl chlorides....          3  UN1107...........  II............  3.............  IB2, T4, TP1.....  150...........  202...........  242...........  5 L...........  60 L..........  B
 
                                                                                                              * * * * * * *
                     Amyl mercaptans...          3  UN1111...........  II............  3.............  A3, A6, IB2, T4,   None..........  202...........  242...........  5 L...........  60 L..........  B.............  95, 102
                                                                                                        TP1.
 
                                                                                                              * * * * * * *
                     Amyl nitrites.....          3  UN1113...........  II............  3.............  IB2, T4, TP1.....  150...........  202...........  242...........  5 L...........  60 L..........  E.............  40
 
                                                                                                              * * * * * * *
                     Butyl mercaptans..          3  UN2347...........  II............  3.............  A3, A6, IB2, T4,   150...........  202...........  242...........  5 L...........  60 L..........  D.............  52, 95
                                                                                                        TP1.
 
                                                                                                              * * * * * * *
                     Cartridges for           1.4S  UN0014...........  II............  None..........  .................  63............  62............  None..........  25 kg.........  100 kg
                      weapons, blank or
                      Cartridges, small
                      arms, blank.
 
                                                                                                              * * * * * * *
                     Iodine                      8  UN1792...........  II............  8.............  B6, IB8, IP2,      None..........  212...........  240...........  Forbidden.....  50 kg.........  D.............  40, 66, 74,
                      monochloride.                                                                     IP4, N41, T7,                                                                                                      89, 90
                                                                                                        TP2.
 
                                                                                                              * * * * * * *
 A                   Mercury contained           8  UN2809...........  III...........  8.............  .................  None..........  164...........  None..........  No limit......  No limit......  B.............  40, 97
                      in manufactured
                      articles.
 
                                                                                                              * * * * * * *
 G                   Nitriles, toxic,          6.1  UN3276...........  I.............  6.1...........  5, T14, TP2,       None..........  201...........  243...........  1 L...........  30 L..........  B.............  52
                      liquid, n.o.s..                                                                   TP13, TP27.
                                                                       II............  6.1...........  IB2, T11, TP2,     153...........  202...........  243...........  5 L...........  60 L..........  B.............  52
                                                                                                        TP27.
                                                                       III...........  6.1...........  IB3, T7, TP1,      153...........  203...........  241...........  60 L..........  220 L.........  A.............  52
                                                                                                        TP28.

[[Page 1036]]

 
 
                                                                                                              * * * * * * *
 G                   Nitriles, toxic,          6.1  UN3439...........  I.............  6.1...........  IB7, IP1, T6,      None..........  211...........  242...........  5 kg..........  50 kg.........  D.............  52
                      solid, n.o.s.                                                                     TP33.
                                                                       II............  6.1...........  IB8, IP2, IP4,     153...........  212...........  242...........  25 kg.........  100 kg........  B.............  52
                                                                                                        T3, TP33.
                                                                       III...........  6.1...........  IB8, IP3, T1,      153...........  213...........  240...........  100 kg........  200 kg........  A.............  52
                                                                                                        TP33.
 
                                                                                                              * * * * * * *
 G                   Organophosphorus          6.1  UN3278...........  I.............  6.1...........  5, T14, TP2,       None..........  201...........  243...........  1 L...........  30 L..........  B
                      compound, toxic,                                                                  TP13, TP27.
                      liquid, n.o.s.
                                                                       II............  6.1...........  IB2, T11, TP2,     153...........  202...........  243...........  5 L...........  60 L..........  B
                                                                                                        TP27.
                                                                       III...........  6.1...........  IB3, T7, TP1,      153...........  203...........  241...........  60 L..........  220 L.........  A
                                                                                                        TP28.
 G                   Organophosphorus          6.1  UN3464...........  I.............  6.1...........  IB7, IP1, T6,      None..........  211...........  242...........  5 kg..........  50 kg.........  B
                      compound, toxic,                                                                  TP33.
                      solid, n.o.s.
                                                                       II............  6.1...........  IB8, IP2, IP4,     153...........  212...........  242...........  25 kg.........  100 kg........  B
                                                                                                        T3, TP33.
                                                                       III...........  6.1...........  IB8, IP3, T1,      153...........  213...........  240...........  100 kg........  200 kg........  A
                                                                                                        TP33.
 
                                                                                                              * * * * * * *
 G                   Organometallic            6.1  UN3282...........  I.............  6.1...........  T14, TP2, TP13,    None..........  201...........  242...........  1 L...........  30 L..........  B
                      compound, toxic,                                                                  TP27.
                      liquid, n.o.s.
                                                                       II............  6.1...........  IB2, T11, TP2,     153...........  202...........  242...........  5 L...........  60 L..........  B
                                                                                                        TP27.
                                                                       III...........  6.1...........  IB3, T7, TP1,      153...........  203...........  241...........  60 L..........  220 L.........  A
                                                                                                        TP28.
 G                   Organometallic            6.1  UN3467...........  I.............  6.1...........  IB7, IP1, T6,      None..........  211...........  242...........  5 kg..........  50 kg.........  B
                      compound, toxic,                                                                  TP33.
                      solid, n.o.s.
                                                                       II............  6.1...........  IB8, IP2, IP4,     153...........  212...........  242...........  25 kg.........  100 kg........  B
                                                                                                        T3, TP33.
                                                                       III...........  6.1...........  IB8, IP3, T1,      153...........  213...........  240...........  100 kg........  200 kg........  A
                                                                                                        TP33.
 
                                                                                                              * * * * * * *
 G                   Toxic by                  6.1  UN3492...........  I.............  6.1, 8, 3.....  1, B9, B14, B30,   None..........  226...........  244...........  Forbidden.....  Forbidden.....  D.............  40, 125
                      inhalation                                                                        B72, T22, TP2,
                      liquid,                                                                           TP13, TP27,
                      corrosive,                                                                        TP38, TP44.
                      flammable, n.o.s.
                      with an
                      inhalation
                      toxicity lower
                      than or equal to
                      200 ml/m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 500 LC50.

[[Page 1037]]

 
 G                   Toxic by                  6.1  UN3493...........  I.............  6.1, 8, 3.....  2, B9, B14, B32,   None..........  227...........  244...........  Forbidden.....  Forbidden.....  D.............  40, 125
                      inhalation                                                                        B74, T20, TP2,
                      liquid,                                                                           TP13, TP27,
                      corrosive,                                                                        TP38, TP45.
                      flammable, n.o.s.
                      with an
                      inhalation
                      toxicity lower
                      than or equal to
                      1000 ml/m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 10 LC50.
 G                   Toxic by                  6.1  UN3488...........  I.............  6.1, 3, 8.....  1, B9, B14, B30,   None..........  226...........  244...........  Forbidden.....  Forbidden.....  D.............  40, 125
                      inhalation                                                                        B72, T22, TP2,
                      liquid,                                                                           TP13, TP27,
                      flammable,                                                                        TP38, TP44.
                      corrosive, n.o.s.
                      with an
                      inhalation
                      toxicity lower
                      than or equal to
                      200 ml/m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 500 LC50.
 G                   Toxic by                  6.1  UN3489...........  I.............  6.1, 3, 8.....  2, B9, B14, B32,   None..........  227...........  244...........  Forbidden.....  Forbidden.....  D.............  40, 125
                      inhalation                                                                        B74, T20, TP2,
                      liquid,                                                                           TP13, TP27,
                      flammable,                                                                        TP38, TP45.
                      corrosive, n.o.s.
                      with an
                      inhalation
                      toxicity lower
                      than or equal to
                      1000 ml/m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 10 LC50.
 G                   Toxic by                  6.1  UN3381...........  I.............  6.1...........  1, B9, B14, B30,   None..........  226...........  244...........  Forbidden.....  Forbidden.....  D.............  40
                      inhalation                                                                        T22, TP2, TP13,
                      liquid, n.o.s.                                                                    TP27, TP38, TP44.
                      with an
                      inhalation
                      toxicity lower
                      than or equal to
                      200 ml/m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 500 LC50.
 G                   Toxic by                  6.1  UN3382...........  I.............  6.1...........  2, B9, B14, B32,   None..........  227...........  244...........  Forbidden.....  Forbidden.....  D.............  40
                      inhalation                                                                        T20, TP2, TP13,
                      liquid, n.o.s.                                                                    TP27, TP38, TP45.
                      with an
                      inhalation
                      toxicity lower
                      than or equal to
                      1000 ml/m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 10 LC50.
 G                   Toxic by                  6.1  UN3383...........  I.............  6.1, 3........  1, B9, B14, B30,   None..........  226...........  244...........  Forbidden.....  Forbidden.....  D.............  40
                      inhalation                                                                        T22, TP2, TP13,
                      liquid,                                                                           TP27, TP38, TP44.
                      flammable, n.o.s.
                      with an
                      inhalation
                      toxicity lower
                      than or equal to
                      200 ml/m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 500 LC50.
 G                   Toxic by                  6.1  UN3384...........  I.............  6.1, 3........  2, B9, B14, B32,   None..........  227...........  244...........  Forbidden.....  Forbidden.....  D.............  40
                      inhalation                                                                        T20, TP2, TP13,
                      liquid,                                                                           TP27, TP38, TP45.
                      flammable, n.o.s.
                      with an
                      inhalation
                      toxicity lower
                      than or equal to
                      1000 ml/m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 10 LC50.

[[Page 1038]]

 
 G                   Toxic by                  6.1  UN3385...........  I.............  6.1, 4.3......  1, B9, B14, B30,   None..........  226...........  244...........  Forbidden.....  Forbidden.....  D.............  40
                      inhalation                                                                        T22, TP2, TP13,
                      liquid, water-                                                                    TP38, TP44.
                      reactive, n.o.s.
                      with an
                      inhalation
                      toxicity lower
                      than or equal to
                      200 ml/m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 500 LC50.
 G                   Toxic by                  6.1  UN3386...........  I.............  6.1, 4.3......  2, B9, B14, B32,   None..........  227...........  244...........  Forbidden.....  Forbidden.....  D.............  40
                      inhalation                                                                        T20, TP2, TP13,
                      liquid, water-                                                                    TP38, TP44.
                      reactive, n.o.s.
                      with an
                      inhalation
                      toxicity lower
                      than or equal to
                      1000 ml/m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 10 LC50.
 G                   Toxic by                  6.1  UN3490...........  I.............  6.1, 4.3, 3...  1, B9, B14, B30,   None..........  226...........  244...........  Forbidden.....  Forbidden.....  D.............  21, 28, 40, 49
                      inhalation                                                                        B72, T22, TP2,
                      liquid, water-                                                                    TP13, TP27,
                      reactive,                                                                         TP38, TP44.
                      flammable, n.o.s.
                      with an
                      inhalation
                      toxicity lower
                      than or equal to
                      200 ml/m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 500 LC50.
 G                   Toxic by                  6.1  UN3491...........  I.............  6.1, 4.3, 3...  2, B9, B14, B32,   None..........  227...........  244...........  Forbidden.....  Forbidden.....  D.............  21, 28, 40, 49
                      inhalation                                                                        B74, T20, TP2,
                      liquid, water-                                                                    TP13, TP27,
                      reactive,                                                                         TP38, TP45.
                      flammable, n.o.s.
                      with an
                      inhalation
                      toxicity lower
                      than or equal to
                      1000 ml/m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 10 LC50.
 G                   Toxic by                  6.1  UN3387...........  I.............  6.1, 5.1......  1, B9, B14, B30,   None..........  226...........  244...........  Forbidden.....  Forbidden.....  D.............  40
                      inhalation                                                                        T22, TP2, TP13,
                      liquid,                                                                           TP38, TP44.
                      oxidizing, n.o.s.
                      with an
                      inhalation
                      toxicity lower
                      than or equal to
                      200 ml/m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 500 LC50.
 G                   Toxic by                  6.1  UN3388...........  I.............  6.1, 5.1......  2, B9, B14, B32,   None..........  227...........  244...........  Forbidden.....  Forbidden.....  D.............  40
                      inhalation                                                                        T20, TP2, TP13,
                      liquid,                                                                           TP38, TP44.
                      oxidizing, n.o.s.
                      with an
                      inhalation
                      toxicity lower
                      than or equal to
                      1000 ml/m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 10 LC50.

[[Page 1039]]

 
 G                   Toxic by                  6.1  UN3389...........  I.............  6.1, 8........  1, B9, B14, B30,   None..........  226...........  244...........  Forbidden.....  Forbidden.....  D.............  40
                      inhalation                                                                        T22, TP2, TP13,
                      liquid,                                                                           TP27, TP38, TP44.
                      corrosive, n.o.s.
                      with an
                      inhalation
                      toxicity lower
                      than or equal to
                      200 ml/m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 500 LC50.
 G                   Toxic by                  6.1  UN3390...........  I.............  6.1, 8........  2, B9, B14, B32,   None..........  227...........  244...........  Forbidden.....  Forbidden.....  D.............  40
                      inhalation                                                                        T20, TP2, TP13,
                      liquid,                                                                           TP27, TP38, TP45.
                      corrosive, n.o.s.
                      with an
                      inhalation
                      toxicity lower
                      than or equal to
                      1000 ml/m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 10 LC50.
 
                                                                                                              * * * * * * *
                     Vinyltrichlorosila          3  UN1305...........  II............  3, 8..........  A3, A7, B6, N34,   None..........  206...........  243...........  1 L...........  5 L...........  B.............  40
                      ne, stabilized.                                                                   T10, TP2, TP7,
                                                                                                        TP13.
 
                                                                                                              * * * * * * *
                     [ADD].............
 
                                                                                                              * * * * * * *
                     Aerosols,                 2.2  UN1950...........  ..............  2.2, 8........  A34..............  306...........  None..........  None..........  75 kg.........  150 kg........  A.............  25, 87, 126
                      corrosive,
                      Packing Group II
                      or III, (each not
                      exceeding 1 L
                      capacity).
                     Aerosols,                 2.1  UN1950...........  ..............  2.1...........  N82..............  306...........  None..........  None..........  75 kg.........  150 kg........  A.............  25, 87, 126
                      flammable, (each
                      not exceeding 1 L
                      capacity).
                     Aerosols,                 2.1  UN1950...........  ..............  2.1...........  N82..............  306...........  304...........  None..........  Forbidden.....  150 kg........  A.............  25, 87, 126
                      flammable, n.o.s.
                      (engine starting
                      fluid) (each not
                      exceeding 1 L
                      capacity).
                     Aerosols, non-            2.2  UN1950...........  ..............  2.2...........  .................  306...........  None..........  None..........  75 kg.........  150 kg........  A.............  25, 87, 126
                      flammable, (each
                      not exceeding 1 L
                      capacity).
                     Aerosols, poison,         2.2  UN1950...........  ..............  2.2, 6.1......  .................  306...........  None..........  None..........  Forbidden.....  Forbidden.....  A.............  25, 87, 126
                      Packing Group III
                      (each not
                      exceeding 1 L
                      capacity).
 
                                                                                                              * * * * * * *
                     Amyl chloride.....          3  UN1107...........  II............  3.............  IB2, T4, TP1.....  150...........  202...........  242...........  5 L...........  60 L..........  B
 
                                                                                                              * * * * * * *
                     Amyl mercaptan....          3  UN1111...........  II............  3.............  A3, A6, IB2, T4,   None..........  202...........  242...........  5 L...........  60 L..........  B.............  95, 102
                                                                                                        TP1.
 
                                                                                                              * * * * * * *
                     Amyl nitrite......          3  UN1113...........  II............  3.............  IB2, T4, TP1.....  150...........  202...........  242...........  5 L...........  60 L..........  E.............  40
 
                                                                                                              * * * * * * *
                     Butyl mercaptan...          3  UN2347...........  II............  3.............  A3, A6, IB2, T4,   150...........  202...........  242...........  5 L...........  60 L..........  D.............  52, 95
                                                                                                        TP1.
 
                                                                                                              * * * * * * *
                     Capacitor,                  9  UN3499...........  ..............  9.............  361..............  176...........  176...........  176...........  No limit......  No limit......  A
                      electric double
                      layer (with an
                      energy storage
                      capacity greater
                      than 0.3 Wh).

[[Page 1040]]

 
                     Cartridges for           1.4S  UN0014...........  II............  1.4S..........  .................  63............  62............  None..........  25 kg.........  100 kg........  01............  25
                      weapons, blank or
                      Cartridges, small
                      arms, blank or
                      Cartridges for
                      tools, blank.
 
                                                                                                              * * * * * * *
 G                   Chemical under            2.2  UN3503...........  ..............  2.2, 8........  362, T50, TP40...  None..........  335...........  313...........  Forbidden.....  100 kg........  D.............  40
                      pressure,
                      corrosive, n.o.s.
 G                   Chemical under            2.1  UN3505...........  ..............  2.1, 8........  362, T50, TP40...  None..........  335...........  313...........  Forbidden.....  75 kg.........  D.............  40
                      pressure,
                      flammable,
                      corrosive, n.o.s.
 G                   Chemical under            2.1  UN3501...........  ..............  2.1...........  362, T50, TP40...  None..........  335...........  313...........  Forbidden.....  75 kg.........  D.............  40
                      pressure,
                      flammable, n.o.s.
 G                   Chemical under            2.1  UN3504...........  ..............  2.1, 6.1......  362, T50, TP40...  None..........  335...........  313...........  Forbidden.....  75 kg.........  D.............  40
                      pressure,
                      flammable, toxic,
                      n.o.s.
 G                   Chemical under            2.2  UN3500...........  ..............  2.2...........  362, T50, TP40...  None..........  335...........  313...........  75 kg.........  150 kg........  B
                      pressure, n.o.s.
 G                   Chemical under            2.2  UN3502...........  ..............  2.2, 6.1......  362, T50, TP40...  None..........  335...........  313...........  Forbidden.....  100 kg........  D.............  40
                      pressure, toxic,
                      n.o.s.
 
                                                                                                              * * * * * * *
                     Iodine                      8  UN3498...........  II............  8.............  IB2, T7, TP2.....  154...........  202...........  242...........  1 L...........  30 L..........  D.............  40, 66, 74,
                      monochloride,                                                                                                                                                                                        89, 90
                      liquid.
                     Iodine                      8  UN1792...........  II............  8.............  B6, IB8, IP2,      None..........  212...........  240...........  Forbidden.....  50 kg.........  D.............  40, 66, 74,
                      monochloride,                                                                     IP4, N41, T7,                                                                                                      89, 90
                      solid.                                                                            TP2.
 
                                                                                                              * * * * * * *
                     Krill meal........        4.2  UN3497...........  II............  4.2...........  155, IB6, IP2,     None..........  212...........  242...........  No limit......  No limit......  B.............  25, 88, 128
                                                                                                        T3, TP33.
                                                                       III...........  4.2...........  155, IB8, IP3,     None..........  213...........  242...........  No limit......  No limit......  A.............  128
                                                                                                        T1, TP33.
 
                                                                                                              * * * * * * *
 A W                 Mercury contained           8  UN3506...........  III...........  8, 6.1........  A191.............  164...........  None..........  None..........  No limit......  No limit......  B.............  40, 97
                      in manufactured
                      articles.
 
                                                                                                              * * * * * * *
 G                   Nitriles, liquid,         6.1  UN3276...........  I.............  6.1...........  5, T14, TP2,       None..........  201...........  243...........  1 L...........  30 L..........  B.............  52
                      toxic, n.o.s.                                                                     TP13, TP27.
                                                                       II............  6.1...........  IB2, T11, TP2,     153...........  202...........  243...........  5 L...........  60 L..........  B.............  52
                                                                                                        TP27.
                                                                       III...........  6.1...........  IB3, T7, TP1,      153...........  203...........  241...........  60 L..........  220 L.........  A.............  52
                                                                                                        TP28.
 G                   Nitriles, solid,          6.1  UN3439...........  I.............  6.1...........  IB7, IP1, T6,      None..........  211...........  242...........  5 kg..........  50 kg.........  D.............  52
                      toxic, n.o.s..                                                                    TP33.
                                                                       II............  6.1...........  IB8, IP2, IP4,     153...........  212...........  242...........  25 kg.........  100 kg........  B.............  52
                                                                                                        T3, TP33.
                                                                       III...........  6.1...........  IB8, IP3, T1,      153...........  213...........  240...........  100 kg........  200 kg........  A.............  52
                                                                                                        TP33.
 

[[Page 1041]]

 
                                                                                                              * * * * * * *
 G                   Organometallic            6.1  UN3282...........  I.............  6.1...........  T14, TP2, TP13,    None..........  201...........  242...........  1 L...........  30 L..........  B
                      compound, liquid,                                                                 TP27.
                      toxic, n.o.s.
                                                                       II............  6.1...........  IB2, T11, TP2,     153...........  202...........  242...........  5 L...........  60 L..........  B
                                                                                                        TP27.
                                                                       III...........  6.1...........  IB3, T7, TP1,      153...........  203...........  241...........  60 L..........  220 L.........  A
                                                                                                        TP28.
 G                   Organometallic            6.1  UN3467...........  I.............  6.1...........  IB7, IP1, T6,      None..........  211...........  242...........  5 kg..........  50 kg.........  B
                      compound, solid,                                                                  TP33.
                      toxic, n.o.s.
                                                                       II............  6.1...........  IB8, IP2, IP4,     153...........  212...........  242...........  25 kg.........  100 kg........  B
                                                                                                        T3, TP33.
                                                                       III...........  6.1...........  IB8, IP3, T1,      153...........  213...........  240...........  100 kg........  200 kg........  A
                                                                                                        TP33.
 
                                                                                                              * * * * * * *
 G                   Organophosphorus          6.1  UN3278...........  I.............  6.1...........  5, T14, TP2,       None..........  201...........  243...........  1 L...........  30 L..........  B
                      compound, liquid,                                                                 TP13, TP27.
                      toxic, n.o.s.
                                                                       II............  6.1...........  IB2, T11, TP2,     153...........  202...........  243...........  5 L...........  60 L..........  B
                                                                                                        TP27.
                                                                       III...........  6.1...........  IB3, T7, TP1,      153...........  203...........  241...........  60 L..........  220 L.........  A
                                                                                                        TP28.
 
                                                                                                              * * * * * * *
 G                   Organophosphorus          6.1  UN3464...........  I.............  6.1...........  IB7, IP1, T6,      None..........  211...........  242...........  5 kg..........  50 kg.........  B
                      compound, solid,                                                                  TP33.
                      toxic, n.o.s.
                                                                       II............  6.1...........  IB8, IP2, IP4,     153...........  212...........  242...........  25 kg.........  100 kg........  B
                                                                                                        T3, TP33.
                                                                       III...........  6.1...........  IB8, IP3, T1,      153...........  213...........  240...........  100 kg........  200 kg........  A
                                                                                                        TP33.
 
                                                                                                              * * * * * * *
 G                   Toxic by                  6.1  UN3488...........  I.............  6.1, 3, 8.....  1, B9, B14, B30,   None..........  226...........  244...........  Forbidden.....  Forbidden.....  D.............  40, 125
                      inhalation                                                                        B72, T22, TP2,
                      liquid,                                                                           TP13, TP27,
                      flammable,                                                                        TP38, TP44.
                      corrosive, n.o.s.
                      with an LC50
                      lower than or
                      equal to 200 ml/
                      m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 500 LC50.
 G                   Toxic by                  6.1  UN3489...........  I.............  6.1, 3, 8.....  2, B9, B14, B32,   None..........  227...........  244...........  Forbidden.....  Forbidden.....  D.............  40, 125
                      inhalation                                                                        B74, T20, TP2,
                      liquid,                                                                           TP13, TP27,
                      flammable,                                                                        TP38, TP45.
                      corrosive, n.o.s.
                      with an LC50
                      lower than or
                      equal to 1000 ml/
                      m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 10 LC50.
 G                   Toxic by                  6.1  UN3381...........  I.............  6.1...........  1, B9, B14, B30,   None..........  226...........  244...........  Forbidden.....  Forbidden.....  D.............  40
                      inhalation                                                                        T22, TP2, TP13,
                      liquid, n.o.s.                                                                    TP27, TP38, TP44.
                      with an LC50
                      lower than or
                      equal to 200 ml/
                      m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 500 LC50.
 G                   Toxic by                  6.1  UN3382...........  I.............  6.1...........  2, B9, B14, B32,   None..........  227...........  244...........  Forbidden.....  Forbidden.....  D.............  40
                      inhalation                                                                        T20, TP2, TP13,
                      liquid, n.o.s.                                                                    TP27, TP38, TP45.
                      with an LC50
                      lower than or
                      equal to 1000 ml/
                      m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 10 LC50.

[[Page 1042]]

 
 G                   Toxic by                  6.1  UN3383...........  I.............  6.1, 3........  1, B9, B14, B30,   None..........  226...........  244...........  Forbidden.....  Forbidden.....  D.............  40
                      inhalation                                                                        T22, TP2, TP13,
                      liquid,                                                                           TP27, TP38, TP44.
                      flammable, n.o.s.
                      with an LC50
                      lower than or
                      equal to 200 ml/
                      m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 500 LC50.
 G                   Toxic by                  6.1  UN3384...........  I.............  6.1, 3........  2, B9, B14, B32,   None..........  227...........  244...........  Forbidden.....  Forbidden.....  D.............  40
                      inhalation                                                                        T20, TP2, TP13,
                      liquid,                                                                           TP27, TP38, TP45.
                      flammable, n.o.s.
                      with an LC50
                      lower than or
                      equal to 1000 ml/
                      m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 10 LC50.
 G                   Toxic by                  6.1  UN3385...........  I.............  6.1, 4.3......  1, B9, B14, B30,   None..........  226...........  244...........  Forbidden.....  Forbidden.....  D.............  40
                      inhalation                                                                        T22, TP2, TP13,
                      liquid, water-                                                                    TP38, TP44.
                      reactive, n.o.s.
                      with an LC50
                      lower than or
                      equal to 200 ml/
                      m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 500 LC50.
 G                   Toxic by                  6.1  UN3386...........  I.............  6.1, 4.3......  2, B9, B14, B32,   None..........  227...........  244...........  Forbidden.....  Forbidden.....  D.............  40
                      inhalation                                                                        T20, TP2, TP13,
                      liquid, water-                                                                    TP38, TP44.
                      reactive, n.o.s.
                      with an LC50
                      lower than or
                      equal to 1000 ml/
                      m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 10 LC50.
 G                   Toxic by                  6.1  UN3490...........  I.............  6.1, 4.3, 3...  1, B9, B14, B30,   None..........  226...........  244...........  Forbidden.....  Forbidden.....  D.............  21, 28, 40, 49
                      inhalation                                                                        B72, T22, TP2,
                      liquid, water-                                                                    TP13, TP27,
                      reactive,                                                                         TP38, TP44.
                      flammable, n.o.s.
                      with an LC50
                      lower than or
                      equal to 200 ml/
                      m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 500 LC50.
 G                   Toxic by                  6.1  UN3491...........  I.............  6.1, 4.3, 3...  2, B9, B14, B32,   None..........  227...........  244...........  Forbidden.....  Forbidden.....  D.............  21, 28, 40, 49
                      inhalation                                                                        B74, T20, TP2,
                      liquid, water-                                                                    TP13, TP27,
                      reactive,                                                                         TP38, TP45.
                      flammable, n.o.s.
                      with an LC50
                      lower or equal to
                      1000 ml/m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 10 LC50.
 G                   Toxic by                  6.1  UN3387...........  I.............  6.1, 5.1......  1, B9, B14, B30,   None..........  226...........  244...........  Forbidden.....  Forbidden.....  D.............  40
                      inhalation                                                                        T22, TP2, TP13,
                      liquid,                                                                           TP38, TP44.
                      oxidizing, n.o.s.
                      with an LC50
                      lower than or
                      equal to 200 ml/
                      m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 500 LC50.

[[Page 1043]]

 
 G                   Toxic by                  6.1  UN3388...........  I.............  6.1, 5.1......  2, B9, B14, B32,   None..........  227...........  244...........  Forbidden.....  Forbidden.....  D.............  40
                      inhalation                                                                        T20, TP2, TP13,
                      liquid,                                                                           TP38, TP44.
                      oxidizing, n.o.s.
                      with an LC50
                      lower than or
                      equal to 1000 ml/
                      m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 10 LC50.
 G                   Toxic by                  6.1  UN3389...........  I.............  6.1, 8........  1, B9, B14, B30,   None..........  226...........  244...........  Forbidden.....  Forbidden.....  D.............  40
                      inhalation                                                                        T22, TP2, TP13,
                      liquid,                                                                           TP27, TP38, TP44.
                      corrosive, n.o.s.
                      with an LC50
                      lower than or
                      equal to 200 ml/
                      m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 500 LC50.
 G                   Toxic by                  6.1  UN3390...........  I.............  6.1, 8........  2, B9, B14, B32,   None..........  227...........  244...........  Forbidden.....  Forbidden.....  D.............  40
                      inhalation                                                                        T20, TP2, TP13,
                      liquid,                                                                           TP27, TP38, TP45.
                      corrosive, n.o.s.
                      with an LC50
                      lower than or
                      equal to 1000 ml/
                      m\3\ and
                      saturated vapor
                      concentration
                      greater than or
                      equal to 10 LC50.
 
                                                                                                              * * * * * * *
                     Vinyltrichlorosila          3  UN1305...........  II............  3, 8..........  A3, A7, B6, N34,   None..........  206...........  243...........  Forbidden.....  5 L...........  B.............  40
                      ne.                                                                               T10, TP2, TP7,
                                                                                                        TP13.
 
                                                                                                              * * * * * * *
                     [REVISE]
 
                                                                                                              * * * * * * *
 I                   Air bag inflators,       1.4G  UN0503...........  II............  1.4G..........  161, A200........  None..........  62............  None..........  Forbidden.....  75 kg.........  02............  25
                      or Air bag
                      modules, or Seat-
                      belt
                      pretensioners.
                     Air bag inflators,          9  UN3268...........  III...........  9.............  160, A200........  166...........  166...........  166...........  25 kg.........  100 kg........  A
                      or Air bag
                      modules, or Seat-
                      belt
                      pretensioners.
 
                                                                                                              * * * * * * *
                     Ammonium nitrate          5.1  UN2067...........  III...........  5.1...........  52, 150, B120,     152...........  213...........  240...........  25 kg.........  100 kg........  B.............  25, 59, 60,
                      based fertilizer.                                                                 IB8, IP3, T1,                                                                                                      66, 117
                                                                                                        TP33.
                     Ammonium nitrate          5.1  UN3375...........  II............  5.1...........  147, 163.........  None..........  214...........  214...........  Forbidden.....  Forbidden.....  D.............  25, 59, 60,
                      emulsion or                                                                                                                                                                                          66, 124
                      Ammonium nitrate
                      suspension or
                      Ammonium nitrate
                      gel, intermediate
                      for blasting
                      explosives.
 
                                                                                                              * * * * * * *
 D                   Ammonium nitrate-        1.5D  NA0331...........  II............  1.5D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  03............  25, 19E
                      fuel oil mixture
                      containing only
                      prilled ammonium
                      nitrate and fuel
                      oil.
 

[[Page 1044]]

 
                                                                                                              * * * * * * *
                     Ammonium nitrate,        1.1D  UN0222...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25, 19E
                      with more than
                      0.2 percent
                      combustible
                      substances,
                      including any
                      organic substance
                      calculated as
                      carbon, to the
                      exclusion of any
                      other added
                      substance.
                     Ammonium nitrate,         5.1  UN1942...........  III...........  5.1...........  A1, A29, B120,     152...........  213...........  240...........  25 kg.........  100 kg........  A.............  25, 59, 60,
                      with not more                                                                     IB8, IP3, T1,                                                                                                      116
                      than 0.2% total                                                                   TP33.
                      combustible
                      material,
                      including any
                      organic
                      substance,
                      calculated as
                      carbon to the
                      exclusion of any
                      other added
                      substance.
 
                                                                                                              * * * * * * *
                     Ammonium                 1.1D  UN0402...........  II............  1.1D..........  107..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25, 19E
                      perchlorate.
 
                                                                                                              * * * * * * *
                     Ammonium picrate,        1.1D  UN0004...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25, 5E, 19E
                      dry or wetted
                      with less than 10
                      percent water, by
                      mass.
 
                                                                                                              * * * * * * *
                     Ammunition,              1.2G  UN0171...........  II............  1.2G..........  .................  ..............  62............  62............  Forbidden.....  Forbidden.....  03............  25
                      illuminating with
                      or without
                      burster,
                      expelling charge
                      or propelling
                      charge.
                     Ammunition,              1.3G  UN0254...........  II............  1.3G..........  .................  ..............  62............  62............  Forbidden.....  Forbidden.....  03............  25
                      illuminating with
                      or without
                      burster,
                      expelling charge
                      or propelling
                      charge.
                     Ammunition,              1.4G  UN0297...........  II............  1.4G..........  .................  ..............  62............  62............  Forbidden.....  75 kg.........  02............  25
                      illuminating with
                      or without
                      burster,
                      expelling charge
                      or propelling
                      charge.
                     Ammunition,              1.3J  UN0247...........  II............  1.3J..........  .................  ..............  62............  None..........  Forbidden.....  Forbidden.....  05............  25, 23E
                      incendiary liquid
                      or gel, with
                      burster,
                      expelling charge
                      or propelling
                      charge.
 
                                                                                                              * * * * * * *
                     Ammunition,              1.2H  UN0243...........  II............  1.2H..........  .................  ..............  62............  62............  Forbidden.....  Forbidden.....  05............  25, 14E, 15E,
                      incendiary, white                                                                                                                                                                                    17E
                      phosphorus, with
                      burster,
                      expelling charge
                      or propelling
                      charge.

[[Page 1045]]

 
                     Ammunition,              1.3H  UN0244...........  II............  1.3H..........  .................  ..............  62............  62............  Forbidden.....  Forbidden.....  05............  25, 14E, 15E,
                      incendiary, white                                                                                                                                                                                    17E
                      phosphorus, with
                      burster,
                      expelling charge
                      or propelling
                      charge.
                     Ammunition,              1.2G  UN0009...........  II............  1.2G..........  .................  ..............  62............  62............  Forbidden.....  Forbidden.....  03............  25
                      incendiary with
                      or without
                      burster,
                      expelling charge,
                      or propelling
                      charge.
                     Ammunition,              1.3G  UN0010...........  II............  1.3G..........  .................  ..............  62............  62............  Forbidden.....  Forbidden.....  03............  25
                      incendiary with
                      or without
                      burster,
                      expelling charge,
                      or propelling
                      charge.
                     Ammunition,              1.4G  UN0300...........  II............  1.4G..........  .................  ..............  62............  62............  Forbidden.....  75 kg.........  02............  25
                      incendiary with
                      or without
                      burster,
                      expelling charge
                      or propelling
                      charge.
                     Ammunition,              1.4G  UN0362...........  II............  1.4G..........  .................  ..............  62............  62............  Forbidden.....  75 kg.........  02............  25
                      practice.
                     Ammunition,              1.3G  UN0488...........  II............  1.3G..........  .................  ..............  62............  62............  Forbidden.....  Forbidden.....  03............  25
                      practice.
                     Ammunition, proof.       1.4G  UN0363...........  II............  1.4G..........  .................  ..............  62............  62............  Forbidden.....  75 kg.........  02............  25
 
                                                                                                              * * * * * * *
                     Ammunition smoke,        1.2H  UN0245...........  II............  1.2H..........  .................  ..............  62............  62............  Forbidden.....  Forbidden.....  05............  25, 14E, 15E,
                      white phosphorus                                                                                                                                                                                     17E
                      with burster,
                      expelling charge,
                      or propelling
                      charge.
                     Ammunition, smoke,       1.3H  UN0246...........  II............  1.3H..........  .................  ..............  62............  62............  Forbidden.....  Forbidden.....  05............  25, 14E, 15E,
                      white phosphorus                                                                                                                                                                                     17E
                      with burster,
                      expelling charge,
                      or propelling
                      charge.
                     Ammunition, smoke        1.2G  UN0015...........  II............  1.2G..........  .................  ..............  62............  62............  Forbidden.....  Forbidden.....  03............  25, 17E
                      with or without
                      burster,
                      expelling charge
                      or propelling
                      charge.
                     Ammunition, smoke        1.3G  UN0016...........  II............  1.3G..........  .................  ..............  62............  62............  Forbidden.....  Forbidden.....  03............  25, 17E
                      with or without
                      burster,
                      expelling charge
                      or propelling
                      charge.
                     Ammunition, smoke        1.4G  UN0303...........  II............  1.4G..........  .................  ..............  62............  62............  Forbidden.....  75 kg.........  02............  25, 14E, 15E,
                      with or without                                                                                                                                                                                      17E
                      burster,
                      expelling charge
                      or propelling
                      charge.
 
                                                                                                              * * * * * * *
                     Ammunition, tear-        1.2G  UN0018...........  II............  1.2G, 8, 6.1..  .................  ..............  62............  62............  Forbidden.....  Forbidden.....  03............  25, 17E
                      producing with
                      burster,
                      expelling charge
                      or propelling
                      charge.
                     Ammunition, tear-        1.3G  UN0019...........  II............  1.3G, 8, 6.1..  .................  ..............  62............  62............  Forbidden.....  Forbidden.....  03............  25, 17E
                      producing with
                      burster,
                      expelling charge
                      or propelling
                      charge.
                     Ammunition, tear-        1.4G  UN0301...........  II............  1.4G, 8, 6.1..  .................  ..............  62............  62............  Forbidden.....  75 kg.........  02............  25, 14E, 15E,
                      producing with                                                                                                                                                                                       17E
                      burster,
                      expelling charge
                      or propelling
                      charge.
 
                                                                                                              * * * * * * *
 G                   Ammunition, toxic        1.2K  UN0020...........  II............  1.2K, 6.1.....  .................  ..............  62............  None..........  Forbidden.....  Forbidden.....  05............  25, 14E, 15E,
                      with burster,                                                                                                                                                                                        17E
                      expelling charge
                      or propelling
                      charge.

[[Page 1046]]

 
 G                   Ammunition, toxic        1.3K  UN0021...........  II............  1.3K, 6.1.....  .................  ..............  62............  None..........  Forbidden.....  Forbidden.....  05............  25, 14E, 15E,
                      with burster,                                                                                                                                                                                        17E
                      expelling charge
                      or propelling
                      charge.
 
                                                                                                              * * * * * * *
                     Articles,                1.6N  UN0486...........  II............  1.6N..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  03............  25
                      explosive,
                      extremely
                      insensitive or
                      Articles, EEI.
 G                   Articles,                1.4S  UN0349...........  II............  1.4S..........  101..............  None..........  62............  None..........  25 kg.........  100 kg........  01............  25
                      explosive, n.o.s.
 G                   Articles,                1.4B  UN0350...........  II............  1.4B..........  101..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                      explosive, n.o.s.
 G                   Articles,                1.4C  UN0351...........  II............  1.4C..........  101..............  None..........  62............  None..........  Forbidden.....  75 kg.........  02............  25
                      explosive, n.o.s.
 G                   Articles,                1.4D  UN0352...........  II............  1.4D..........  101..............  None..........  62............  None..........  Forbidden.....  75 kg.........  02............  25
                      explosive, n.o.s.
 G                   Articles,                1.4G  UN0353...........  II............  1.4G..........  101..............  None..........  62............  None..........  Forbidden.....  75 kg.........  02............  25
                      explosive, n.o.s.
 G                   Articles,                1.1L  UN0354...........  II............  1.1L..........  101..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  02............  25, 14E, 15E
                      explosive, n.o.s.
 G                   Articles,                1.2L  UN0355...........  II............  1.2L..........  101..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  05............  25, 14E, 15E
                      explosive, n.o.s.
 G                   Articles,                1.3L  UN0356...........  II............  1.3L..........  101..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  05............  25, 14E, 15E
                      explosive, n.o.s.
 G                   Articles,                1.1C  UN0462...........  II............  1.1C..........  101..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      explosive, n.o.s.
 G                   Articles,                1.1D  UN0463...........  II............  1.1D..........  101..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      explosive, n.o.s.
 G                   Articles,                1.1E  UN0464...........  II............  1.1E..........  101..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      explosive, n.o.s.
 G                   Articles,                1.1F  UN0465...........  II............  1.1F..........  101..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                      explosive, n.o.s.
 G                   Articles,                1.2C  UN0466...........  II............  1.2C..........  101..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      explosive, n.o.s.
 G                   Articles,                1.2D  UN0467...........  II............  1.2D..........  101..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      explosive, n.o.s.
 G                   Articles,                1.2E  UN0468...........  II............  1.2E..........  101..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      explosive, n.o.s.
 G                   Articles,                1.2F  UN0469...........  II............  1.2F..........  101..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                      explosive, n.o.s.
 G                   Articles,                1.3C  UN0470...........  II............  1.3C..........  101..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      explosive, n.o.s.
 G                   Articles,                1.4E  UN0471...........  II............  1.4E..........  101..............  None..........  62............  None..........  Forbidden.....  75 kg.........  03............  25
                      explosive, n.o.s.
 G                   Articles,                1.4F  UN0472...........  II............  1.4F..........  101..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                      explosive, n.o.s.
 
                                                                                                              * * * * * * *
                     Articles,                1.2L  UN0380...........  II............  1.2L..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  05............  25, 14E, 15E,
                      pyrophoric.                                                                                                                                                                                          17E
                     Articles,                1.1G  UN0428...........  II............  1.1G..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  03............  25
                      pyrotechnic for
                      technical
                      purposes.
                     Articles,                1.2G  UN0429...........  II............  1.2G..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  03............  25
                      pyrotechnic for
                      technical
                      purposes.
                     Articles,                1.3G  UN0430...........  II............  1.3G..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  03............  25
                      pyrotechnic for
                      technical
                      purposes.
                     Articles,                1.4G  UN0431...........  II............  1.4G..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  02............  25
                      pyrotechnic for
                      technical
                      purposes.
                     Articles,                1.4S  UN0432...........  II............  1.4S..........  .................  None..........  62............  None..........  25 kg.........  100 kg........  01............  25
                      pyrotechnic for
                      technical
                      purposes.
 
                                                                                                              * * * * * * *
 A, G                Aviation regulated          9  UN3334...........  ..............  9.............  A35, A189........  155...........  204...........  ..............  450 L.........  450 L.........  A
                      liquid, n.o.s.
 A, G                Aviation regulated          9  UN3335...........  ..............  9.............  A35..............  155...........  204...........  ..............  400 kg........  400 kg........  A
                      solid, n.o.s.
 

[[Page 1047]]

 
                                                                                                              * * * * * * *
                     Barium azide, dry        1.1A  UN0224...........  II............  1.1A, 6.1.....  111, 117.........  None..........  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                      or wetted with
                      less than 50
                      percent water, by
                      mass.
 
                                                                                                              * * * * * * *
                     Batteries, dry,             8  UN3028...........  III...........  8.............  237..............  None..........  213...........  None..........  25 kg.........  230 kg........  A.............  52
                      containing
                      potassium
                      hydroxide solid,
                      electric storage.
 
                                                                                                              * * * * * * *
 W                   Batteries, nickel-          9  UN3496...........  ..............  9.............  340..............  ..............  ..............  ..............  ..............  ..............  A.............  25
                      metal hydride see
                      Batteries, dry,
                      sealed, n.o.s.
                      for nickel-metal
                      hydride batteries
                      transported by
                      modes other than
                      vessel.
 
                                                                                                              * * * * * * *
                     Batteries, wet,             8  UN2794...........  III...........  8.............  A51..............  159...........  159...........  159...........  30 kg.........  No limit......  A.............  146
                      filled with acid,
                      electric storage.
                     Batteries, wet,             8  UN2795...........  III...........  8.............  A51..............  159...........  159...........  159...........  30 kg.........  No limit......  A.............  52, 146
                      filled with
                      alkali, electric
                      storage.
 
                                                                                                              * * * * * * *
                     Benzyldimethylamin          8  UN2619...........  II............  8, 3..........  B2, IB2, T7, TP2.  154...........  202...........  243...........  1 L...........  30 L..........  A.............  25, 40
                      e.
 
                                                                                                              * * * * * * *
                     Black powder,            1.1D  UN0028...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      compressed or
                      Gunpowder,
                      compressed or
                      Black powder, in
                      pellets or
                      Gunpowder, in
                      pellets.
                     Black powder or          1.1D  UN0027...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      Gunpowder,
                      granular or as a
                      meal.
 
                                                                                                              * * * * * * *
                     Bombs, photo-flash       1.1F  UN0037...........  II............  1.1F..........  .................  ..............  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                     Bombs, photo-flash       1.1D  UN0038...........  II............  1.1D..........  .................  ..............  62............  62............  Forbidden.....  Forbidden.....  04............  25
                     Bombs, photo-flash       1.2G  UN0039...........  II............  1.2G..........  .................  ..............  62............  62............  Forbidden.....  Forbidden.....  03............  25
                     Bombs, photo-flash       1.3G  UN0299...........  II............  1.3G..........  .................  ..............  62............  62............  Forbidden.....  Forbidden.....  03............  25
 
                                                                                                              * * * * * * *
                     Bombs, with              1.1F  UN0033...........  II............  1.1F..........  .................  ..............  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                      bursting charge.
                     Bombs, with              1.1D  UN0034...........  II............  1.1D..........  .................  ..............  62............  62............  Forbidden.....  Forbidden.....  04............  25
                      bursting charge.
                     Bombs, with              1.2D  UN0035...........  II............  1.2D..........  .................  ..............  62............  62............  Forbidden.....  Forbidden.....  04............  25
                      bursting charge.
                     Bombs, with              1.2F  UN0291...........  II............  1.2F..........  .................  ..............  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                      bursting charge.
                     Bombs with               1.1J  UN0399...........  II............  1.1J..........  .................  ..............  62............  None..........  Forbidden.....  Forbidden.....  05............  25, 23E
                      flammable liquid,
                      with bursting
                      charge.
                     Bombs with               1.2J  UN0400...........  II............  1.2J..........  .................  ..............  62............  None..........  Forbidden.....  Forbidden.....  05............  25, 23E
                      flammable liquid,
                      with bursting
                      charge.
                     Boosters with            1.1B  UN0225...........  II............  1.1B..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                      detonator.
                     Boosters with            1.2B  UN0268...........  II............  1.2B..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                      detonator.
                     Boosters, without        1.1D  UN0042...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      detonator.

[[Page 1048]]

 
                     Boosters, without        1.2D  UN0283...........  II............  1.2D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      detonator.
 
                                                                                                              * * * * * * *
                     Boron trifluoride.        2.3  UN1008...........  ..............  2.3, 8........  2, 238, B9, B14..  None..........  302...........  314, 315......  Forbidden.....  Forbidden.....  D.............  40
 
                                                                                                              * * * * * * *
                     Boron trifluoride         4.3  UN2965...........  I.............  4.3, 8, 3.....  A19, T10, TP2,     None..........  201...........  243...........  Forbidden.....  1 L...........  D.............  21, 28, 40,
                      dimethyl etherate.                                                                TP7, TP13.                                                                                                         49, 100
 
                                                                                                              * * * * * * *
                     Bursters,                1.1D  UN0043...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      explosive.
 
                                                                                                              * * * * * * *
                     5-tert-Butyl-2,4,6-       4.1  UN2956...........  III...........  4.1...........  159..............  None..........  223...........  None..........  Forbidden.....  Forbidden.....  D.............  12, 25, 127
                      trinitro-m-xylene
                      or Musk xylene.
 
                                                                                                              * * * * * * *
                     Calcium                   5.1  UN3485...........  II............  5.1, 8........  165, 166, A7, A9,  152...........  212...........  None..........  5 kg..........  25 kg.........  D.............  4, 25, 52, 56,
                      hypochlorite,                                                                     IB8, IP2, IP4,                                                                                                     58, 69, 142
                      dry, corrosive or                                                                 IP13, N34, W9.
                      Calcium
                      hypochlorite
                      mixture, dry,
                      corrosive with
                      more than 39%
                      available
                      chlorine (8.8%
                      available oxygen).
                     Calcium                   5.1  UN1748...........  II............  5.1...........  165, 166, A7, A9,  152...........  212...........  None..........  5 kg..........  25 kg.........  D.............  4, 25, 52, 56,
                      hypochlorite, dry                                                                 IB8, IP2, IP4,                                                                                                     58, 69, 142
                      or Calcium                                                                        IP13, N34, W9.
                      hypochlorite
                      mixture dry with
                      more than 39%
                      available
                      chlorine (8.8%
                      available oxygen).
                                                                       III...........  5.1...........  165, 171, A7, A9,  152...........  213...........  240...........  25 kg.........  100 kg........  D.............  4, 25, 52, 56,
                                                                                                        IB8, IP4, IP13,                                                                                                    58, 69, 142
                                                                                                        N34, W9.
                     Calcium                   5.1  UN3487...........  II............  5.1, 8........  165, IB8, IP2,     152...........  212...........  240...........  5 kg..........  25 kg.........  D.............  4, 25, 52, 56,
                      hypochlorite,                                                                     IP4, IP13, W9.                                                                                                     58, 69, 142
                      hydrated,
                      corrosive or
                      Calcium
                      hypochlorite,
                      hydrated mixture,
                      corrosive with
                      not less than
                      5.5% but not more
                      than 16% water.
                                                                       III...........  5.1, 8........  165, IB8, IP4, W9  152...........  213...........  240...........  25 kg.........  100 kg........  D.............  4, 25, 52, 56,
                                                                                                                                                                                                                           58, 69, 142
                     Calcium                   5.1  UN2880...........  II............  5.1...........  165, IB8, IP2,     152...........  212...........  240...........  5 kg..........  25 kg.........  D.............  4, 25, 52, 56,
                      hypochlorite,                                                                     IP4, IP13, W9.                                                                                                     58, 69, 142
                      hydrated or
                      Calcium
                      hypochlorite,
                      hydrated mixture,
                      with not less
                      than 5.5% but not
                      more than 16%
                      water.
                                                                       III...........  5.1...........  165, 171, IB8,     152...........  213...........  240...........  25 kg.........  100 kg........  D.............  4, 25, 52, 56,
                                                                                                        IP4, IP13, W9.                                                                                                     58, 69, 142

[[Page 1049]]

 
                     Calcium                   5.1  UN3486...........  III...........  5.1, 8........  165, A1, A29,      152...........  213...........  240...........  5 kg..........  25 kg.........  D.............  4, 25, 52, 56,
                      hypochlorite                                                                      IB8, IP3, IP13,                                                                                                    58, 69, 142
                      mixture, dry,                                                                     N34, W9, W10.
                      corrosive with
                      more than 10% but
                      not more than 39%
                      available
                      chlorine.
 
                                                                                                              * * * * * * *
                     Calcium                   5.1  UN2208...........  III...........  5.1...........  165, A1, A29,      152...........  213...........  240...........  25 kg.........  100 kg........  D.............  4, 25, 52, 56,
                      hypochlorite                                                                      IB8, IP3, IP13,                                                                                                    58, 69, 142
                      mixture, dry,                                                                     N34, W9, W10.
                      with more than
                      10% but not more
                      than 39%
                      available
                      chlorine.
 
                                                                                                              * * * * * * *
                     Calcium nitrate...        5.1  UN1454...........  III...........  5.1...........  34, B120, IB8,     152...........  213...........  240...........  25 kg.........  100 kg........  A
                                                                                                        IP3, T1, TP33.
 
                                                                                                              * * * * * * *
                     Cartridges, flash.       1.1G  UN0049...........  II............  1.1G..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  03............  25
                     Cartridges, flash.       1.3G  UN0050...........  II............  1.3G..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  03............  25
                     Cartridges for           1.1C  UN0326...........  II............  1.1C..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      weapons, blank.
                     Cartridges for           1.2C  UN0413...........  II............  1.2C..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      weapons, blank.
 
                                                                                                              * * * * * * *
                     Cartridges for           1.3C  UN0327...........  II............  1.3C..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      weapons, blank or
                      Cartridges, small
                      arms, blank.
                     Cartridges for           1.4C  UN0338...........  II............  1.4C..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  02............  25
                      weapons, blank or
                      Cartridges, small
                      arms, blank.
                     Cartridges for           1.2C  UN0328...........  II............  1.2C..........  .................  None..........  62............  62............  Forbidden.....  Forbidden.....  04............  25
                      weapons, inert
                      projectile.
                     Cartridges for           1.4S  UN0012...........  II............  1.4S..........  .................  63............  62............  None..........  25 kg.........  100 kg........  01............  25
                      weapons, inert
                      projectile or
                      Cartridges, small
                      arms.
                     Cartridges for           1.4C  UN0339...........  II............  1.4C..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  02............  25
                      weapons, inert
                      projectile or
                      Cartridges, small
                      arms.
                     Cartridges for           1.3C  UN0417...........  II............  1.3C..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      weapons, inert
                      projectile or
                      Cartridges, small
                      arms.
                     Cartridges for           1.1F  UN0005...........  II............  1.1F..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                      weapons, with
                      bursting charge.
                     Cartridges for           1.1E  UN0006...........  II............  1.1E..........  .................  None..........  62............  62............  Forbidden.....  Forbidden.....  04............  25
                      weapons, with
                      bursting charge.
                     Cartridges for           1.2F  UN0007...........  II............  1.2F..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                      weapons, with
                      bursting charge.
                     Cartridges for           1.2E  UN0321...........  II............  1.2E..........  .................  None..........  62............  62............  Forbidden.....  Forbidden.....  04............  25
                      weapons, with
                      bursting charge.
                     Cartridges for           1.4F  UN0348...........  II............  1.4F..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                      weapons, with
                      bursting charge.
                     Cartridges for           1.4E  UN0412...........  II............  1.4E..........  .................  None..........  62............  62............  Forbidden.....  75 kg.........  03............  25
                      weapons, with
                      bursting charge.
                     Cartridges, oil          1.3C  UN0277...........  II............  1.3C..........  .................  None..........  62............  62............  Forbidden.....  Forbidden.....  04............  25
                      well.
                     Cartridges, oil          1.4C  UN0278...........  II............  1.4C..........  .................  None..........  62............  62............  Forbidden.....  75 kg.........  02............  25
                      well.
                     Cartridges, power        1.3C  UN0275...........  II............  1.3C..........  .................  None..........  62............  62............  Forbidden.....  75 kg.........  04............  25
                      device.
                     Cartridges, power        1.4C  UN0276...........  II............  1.4C..........  110..............  None..........  62............  62............  Forbidden.....  75 kg.........  02............  25
                      device.
                     Cartridges, power        1.4S  UN0323...........  II............  1.4S..........  110, 347.........  None..........  62............  62............  25 kg.........  100 kg........  01............  25
                      device.
                     Cartridges, power        1.2C  UN0381...........  II............  1.2C..........  .................  None..........  62............  62............  Forbidden.....  Forbidden.....  04............  25
                      device.
 
                                                                                                              * * * * * * *
                     Cartridges, signal       1.3G  UN0054...........  II............  1.3G..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  03............  25
                     Cartridges, signal       1.4G  UN0312...........  II............  1.4G..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  02............  25

[[Page 1050]]

 
                     Cartridges, signal       1.4S  UN0405...........  II............  1.4S..........  .................  None..........  62............  None..........  25 kg.........  100 kg........  01............  25
 D                   Cartridges, small       ORM-D  .................  ..............  None..........  222..............  63............  None..........  None..........  30 kg gross...  Forbidden.....  A
                      arms.
 D                   Cartridges power        ORM-D  None.............  ..............  None..........  222..............  63............  None..........  None..........  30 kg gross...  Forbidden.....  A
                      device (used to
                      project fastening
                      devices).
 
                                                                                                              * * * * * * *
                     Cases, cartridge,        1.4S  UN0055...........  II............  1.4S..........  50...............  63............  62............  None..........  25 kg.........  100 kg........  01............  25
                      empty with primer.
                     Cases, cartridges,       1.4C  UN0379...........  II............  1.4C..........  50...............  None..........  62............  None..........  Forbidden.....  75 kg.........  02............  25
                      empty with primer.
                     Cases,                   1.4C  UN0446...........  II............  1.4C..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  02............  25
                      combustible,
                      empty, without
                      primer.
                     Cases,                   1.3C  UN0447...........  II............  1.3C..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      combustible,
                      empty, without
                      primer.
 
                                                                                                              * * * * * * *
                     Cells, containing         4.3  UN3292...........  II............  4.3...........  .................  189...........  189...........  189...........  25 kg.........  No limit......  A
                      sodium.
 
                                                                                                              * * * * * * *
                     Charges, bursting,       1.1D  UN0457...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      plastics bonded.
                     Charges, bursting,       1.2D  UN0458...........  II............  1.2D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      plastics bonded.
                     Charges, bursting,       1.4D  UN0459...........  II............  1.4D..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  02............  25
                      plastics bonded.
                     Charges, bursting,       1.4S  UN0460...........  II............  1.4S..........  347..............  None..........  62............  None..........  25 kg.........  100 kg........  01............  25
                      plastics bonded.
                     Charges,                 1.1D  UN0048...........  II............  1.1D..........  .................  None..........  62............  62............  Forbidden.....  Forbidden.....  04............  25
                      demolition.
                     Charges, depth....       1.1D  UN0056...........  II............  1.1D..........  .................  None..........  62............  62............  Forbidden.....  Forbidden.....  04............  25
 
                                                                                                              * * * * * * *
                     Charges,                 1.1D  UN0442...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      explosive,
                      commercial
                      without detonator.
                     Charges,                 1.2D  UN0443...........  II............  1.2D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      explosive,
                      commercial
                      without detonator.
                     Charges,                 1.4D  UN0444...........  II............  1.4D..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  02............  25
                      explosive,
                      commercial
                      without detonator.
                     Charges,                 1.4S  UN0445...........  II............  1.4S..........  347..............  None..........  62............  None..........  25 kg.........  100 kg........  01............  25
                      explosive,
                      commercial
                      without detonator.
                     Charges,                 1.1C  UN0271...........  II............  1.1C..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      propelling.
                     Charges,                 1.3C  UN0272...........  II............  1.3C..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      propelling.
                     Charges,                 1.2C  UN0415...........  II............  1.2C..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      propelling.
                     Charges,                 1.4C  UN0491...........  II............  1.4C..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  02............  25
                      propelling.
                     Charges,                 1.3C  UN0242...........  II............  1.3C..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      propelling, for
                      cannon.
                     Charges,                 1.1C  UN0279...........  II............  1.1C..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      propelling, for
                      cannon.
                     Charges,                 1.2C  UN0414...........  II............  1.2C..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      propelling, for
                      cannon.

[[Page 1051]]

 
                     Charges, shaped,         1.4D  UN0237...........  II............  1.4D..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  02............  25
                      flexible, linear.
                     Charges, shaped,         1.1D  UN0288...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      flexible, linear.
                     Charges, shaped,         1.1D  UN0059...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      without detonator.
                     Charges, shaped,         1.2D  UN0439...........  II............  1.2D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      without detonator.
                     Charges, shaped,         1.4D  UN0440...........  II............  1.4D..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  02............  25
                      without detonator.
                     Charges, shaped,         1.4S  UN0441...........  II............  1.4S..........  347..............  None..........  62............  None..........  25 kg.........  100 kg........  01............  25
                      without detonator.
                     Charges,                 1.1D  UN0060...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      supplementary
                      explosive.
 
                                                                                                              * * * * * * *
                     Chlorosilanes,              3  UN2985...........  II............  3, 8..........  T14, TP2, TP7,     None..........  206...........  243...........  Forbidden.....  5 L...........  B.............  40
                      flammable,                                                                        TP13, TP27.
                      corrosive, n.o.s.
                     Chlorosilanes,            6.1  UN3362...........  II............  6.1,8,3.......  T14, TP2, TP7,     None..........  206...........  243...........  Forbidden.....  30 L..........  C.............  40, 125
                      toxic, corrosive,                                                                 TP13, TP27.
                      flammable, n.o.s.
                     Chlorosilanes,            6.1  UN3361...........  II............  6.1, 8........  T14, TP2, TP7,     None..........  206...........  243...........  Forbidden.....  30 L..........  C.............  40
                      toxic, corrosive,                                                                 TP13, TP27.
                      n.o.s.
 
                                                                                                              * * * * * * *
                     Components,              1.2B  UN0382...........  II............  1.2B..........  101..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                      explosive train,
                      n.o.s.
                     Components,              1.4B  UN0383...........  II............  1.4B..........  101..............  None..........  62............  None..........  Forbidden.....  75 kg.........  05............  25
                      explosive train,
                      n.o.s.
                     Components,              1.4S  UN0384...........  II............  1.4S..........  101..............  None..........  62............  None..........  25 kg.........  100 kg........  01............  25
                      explosive train,
                      n.o.s.
                     Components,              1.1B  UN0461...........  II............  1.1B..........  101..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                      explosive train,
                      n.o.s.
 
                                                                                                              * * * * * * *
                     Contrivances,            1.2L  UN0248...........  II............  1.2L..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  05............  25, 14E, 15E,
                      water-activated,                                                                                                                                                                                     17E
                      with burster,
                      expelling charge
                      or propelling
                      charge.
                     Contrivances,            1.3L  UN0249...........  II............  1.3L..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  05............  25, 14E, 15E,
                      water-activated,                                                                                                                                                                                     17E
                      with burster,
                      expelling charge
                      or propelling
                      charge.
 
                                                                                                              * * * * * * *
                     Copra.............        4.2  UN1363...........  III...........  4.2...........  IB8, IP3, IP7....  None..........  213...........  241...........  Forbidden.....  Forbidden.....  A.............  13, 25, 119
 
                                                                                                              * * * * * * *
                     Cord, detonating,        1.1D  UN0065...........  II............  1.1D..........  102..............  63(a).........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      flexible.
                     Cord, detonating,        1.4D  UN0289...........  II............  1.4D..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  02............  25
                      flexible.
                     Cord detonating or       1.2D  UN0102...........  II............  1.2D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      Fuse detonating
                      metal clad.
                     Cord, detonating         1.1D  UN0290...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      or Fuse,
                      detonating metal
                      clad.
                     Cord, detonating,        1.4D  UN0104...........  II............  1.4D..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  02............  25
                      mild effect or
                      Fuse, detonating,
                      mild effect metal
                      clad.
                     Cord, igniter.....       1.4G  UN0066...........  II............  1.4G..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  02............  25
 
                                                                                                              * * * * * * *
                     Cutters, cable,          1.4S  UN0070...........  II............  1.4S..........  .................  None..........  62............  62............  25 kg.........  100 kg........  01............  25
                      explosive.
 

[[Page 1052]]

 
                                                                                                              * * * * * * *
                     Cyclotetramethylen       1.1D  UN0484...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      etetranitramine,
                      desensitized or
                      Octogen,
                      desensitized or
                      HMX, desensitized.
                     Cyclotetramethylen       1.1D  UN0226...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      etetranitramine,
                      wetted or HMX,
                      wetted or
                      Octogen, wetted
                      with not less
                      than 15 percent
                      water, by mass.
 
                                                                                                              * * * * * * *
                     Cyclotrimethylenet       1.1D  UN0483...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      rinitramine,
                      desensitized or
                      Cyclonite,
                      desensitized or
                      Hexogen,
                      desensitized or
                      RDX, desensitized.
                     Cyclotrimethylenet       1.1D  UN0072...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      rinitramine,
                      wetted or
                      Cyclonite, wetted
                      or Hexogen,
                      wetted or RDX,
                      wetted with not
                      less than 15
                      percent water by
                      mass.
 
                                                                                                              * * * * * * *
                     Deflagrating metal       1.3C  UN0132...........  II............  1.3C..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25, 5E
                      salts of aromatic
                      nitroderivatives,
                      n.o.s.
 
                                                                                                              * * * * * * *
                     Detonator                1.1B  UN0360...........  II............  1.1B..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                      assemblies, non-
                      electric for
                      blasting.
                     Detonator                1.4B  UN0361...........  II............  1.4B..........  103..............  63(f), 63(g)..  62............  None..........  Forbidden.....  75 kg.........  05............  25
                      assemblies, non-
                      electric, for
                      blasting.
                     Detonator                1.4S  UN0500...........  II............  1.4S..........  347..............  63(f), 63(g)..  62............  None..........  25 kg.........  100 kg........  01............  25
                      assemblies, non-
                      electric, for
                      blasting.
                     Detonators,              1.1B  UN0030...........  II............  1.1B..........  .................  63(f), 63(g)..  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                      electric, for
                      blasting.
                     Detonators,              1.4B  UN0255...........  II............  1.4B..........  103..............  63(f), 63(g)..  62............  None..........  Forbidden.....  75 kg.........  05............  25
                      electric, for
                      blasting.
                     Detonators,              1.4S  UN0456...........  II............  1.4S..........  347..............  63(f), 63(g)..  62............  None..........  25 kg.........  100 kg........  01............  25
                      electric for
                      blasting.
                     Detonators for           1.1B  UN0073...........  II............  1.1B..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                      ammunition.
                     Detonators for           1.2B  UN0364...........  II............  1.2B..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                      ammunition.
                     Detonators for           1.4B  UN0365...........  II............  1.4B..........  103..............  None..........  62............  None..........  Forbidden.....  75 kg.........  05............  25
                      ammunition.

[[Page 1053]]

 
                     Detonators for           1.4S  UN0366...........  II............  1.4S..........  347..............  None..........  62............  None..........  25 kg.........  100 kg........  01............  25
                      ammunition.
                     Detonators, non-         1.1B  UN0029...........  II............  1.1B..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                      electric, for
                      blasting.
                     Detonators, non-         1.4B  UN0267...........  II............  1.4B..........  103..............  63(f), 63(g)..  62............  None..........  Forbidden.....  75 kg.........  05............  25
                      electric, for
                      blasting.
                     Detonators, non-         1.4S  UN0455...........  II............  1.4S..........  347..............  63(f), 63(g)..  62............  None..........  25 kg.........  100 kg........  01............  25
                      electric, for
                      blasting.
 
                                                                                                              * * * * * * *
                     Diazodinitrophenol       1.1A  UN0074...........  II............  1.1A..........  111, 117.........  None..........  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                      , wetted with not
                      less than 40
                      percent water or
                      mixture of
                      alcohol and
                      water, by mass.
 
                                                                                                              * * * * * * *
                     Dichlorophenyl            6.1  UN2250...........  II............  6.1...........  IB8, IP2, IP4,     153...........  212...........  242...........  25 kg.........  100 kg........  B.............  25, 40
                      isocyanates.                                                                      T3, TP33.
 
                                                                                                              * * * * * * *
                     Dicyclohexylammoni        4.1  UN2687...........  III...........  4.1...........  IB8, IP3, T1,      151...........  213...........  240...........  25 kg.........  100 kg........  A.............  25
                      um nitrite.                                                                       TP33.
 
                                                                                                              * * * * * * *
                     Diethyleneglycol         1.1D  UN0075...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25, 21E
                      dinitrate,
                      desensitized with
                      not less than 25
                      percent non-
                      volatile water-
                      insoluble
                      phlegmatizer, by
                      mass.
 
                                                                                                              * * * * * * *
                     Dimethyl disulfide          3  UN2381...........  II............  3, 6.1........  IB2, T7, TP2,      150...........  202...........  242...........  Forbidden.....  Forbidden.....  B.............  40
                                                                                                        TP13, TP39.
 
                                                                                                              * * * * * * *
                     Dinitroglycoluril        1.1D  UN0489...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      or Dingu.
 
                                                                                                              * * * * * * *
                     Dinitrophenol, dry       1.1D  UN0076...........  II............  1.1D, 6.1.....  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25, 5E
                      or wetted with
                      less than 15
                      percent water, by
                      mass.
 
                                                                                                              * * * * * * *
                     Dinitrophenolates        1.3C  UN0077...........  II............  1.3C, 6.1.....  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25, 5E
                      alkali metals,
                      dry or wetted
                      with less than 15
                      percent water, by
                      mass.
 
                                                                                                              * * * * * * *
                     Dinitroresorcinol,       1.1D  UN0078...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25, 5E
                      dry or wetted
                      with less than 15
                      percent water, by
                      mass.
 
                                                                                                              * * * * * * *
                     Dinitrosobenzene..       1.3C  UN0406...........  II............  1.3C..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
 
                                                                                                              * * * * * * *
                     Dipicryl sulfide,        1.1D  UN0401...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      dry or wetted
                      with less than 10
                      percent water, by
                      mass.
 

[[Page 1054]]

 
                                                                                                              * * * * * * *
                     Engines, internal           9  UN3166...........  ..............  9.............  135, A200........  220...........  220...........  220...........  Forbidden.....  No limit......  A
                      combustion, or
                      Engines, fuel
                      cell, flammable
                      gas powered.
                     Engines internal            9  UN3166...........  ..............  9.............  135, A200........  220...........  220...........  220...........  No limit......  No limit......  A
                      combustion, or
                      Engines, fuel
                      cell, flammable
                      liquid powered.
 
                                                                                                              * * * * * * *
 G                   Environmentally             9  UN3077...........  III...........  9.............  8, 146, 335,       155...........  213...........  240...........  No limit......  No limit......  A
                      hazardous                                                                         A112, B54, B120,
                      substance, solid,                                                                 IB8, IP3, N20,
                      n.o.s.                                                                            T1, TP33.
 
                                                                                                              * * * * * * *
                     Ethyltrichlorosila          3  UN1196...........  II............  3, 8..........  A7, N34, T10,      None..........  206...........  243...........  Forbidden.....  5 L...........  B.............  40
                      ne.                                                                               TP2, TP7, TP13.
 
                                                                                                              * * * * * * *
                     Explosive,               1.1D  UN0081...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25, 19E, 21E
                      blasting, type A.
                     Explosive,               1.1D  UN0082...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25, 19E
                      blasting, type B.
                     Explosive,               1.5D  UN0331...........  II............  1.5D..........  105, 106.........  None..........  62............  None..........  Forbidden.....  Forbidden.....  03............  25, 19E
                      blasting, type B
                      or Agent
                      blasting, Type B.
                     Explosive,               1.1D  UN0083...........  II............  1.1D..........  123..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25, 22E
                      blasting, type C.
                     Explosive,               1.1D  UN0084...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      blasting, type D.
                     Explosive,               1.1D  UN0241...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25, 19E
                      blasting, type E.
                     Explosive,               1.5D  UN0332...........  II............  1.5D..........  105, 106.........  None..........  62............  None..........  Forbidden.....  Forbidden.....  03............  25, 19E
                      blasting, type E
                      or Agent
                      blasting, Type E.
 
                                                                                                              * * * * * * *
                     Fireworks.........       1.1G  UN0333...........  II............  1.1G..........  108..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  03............  25
                     Fireworks.........       1.2G  UN0334...........  II............  1.2G..........  108..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  03............  25
                     Fireworks.........       1.3G  UN0335...........  II............  1.3G..........  108..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  03............  25
                     Fireworks.........       1.4G  UN0336...........  II............  1.4G..........  108..............  None..........  62............  None..........  Forbidden.....  75 kg.........  02............  25
                     Fireworks.........       1.4S  UN0337...........  II............  1.4S..........  108..............  None..........  62............  None..........  25 kg.........  100 kg........  01............  25
 
                                                                                                              * * * * * * *
 W                   Fish meal,                  9  UN2216...........  III...........  None..........  155, IB8, IP3,     155...........  218...........  218...........  No limit......  No limit......  B.............  25, 88, 122,
                      stabilized or                                                                     T1, TP33.                                                                                                          128
                      Fish scrap,
                      stabilized.
 
                                                                                                              * * * * * * *
                     Fish meal,                4.2  UN1374...........  II............  4.2...........  155, A1, A19,      None..........  212...........  241...........  15 kg.........  50 kg.........  B.............  18, 25, 128
                      unstablized or                                                                    IB8, IP2, IP4,
                      Fish scrap,                                                                       T3, TP33.
                      unstabilized.

[[Page 1055]]

 
 
                                                                                                              * * * * * * *
                     Flares, aerial....       1.3G  UN0093...........  II............  1.3G..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  03............  25
                     Flares, aerial....       1.4G  UN0403...........  II............  1.4G..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  02............  25
                     Flares, aerial....       1.4S  UN0404...........  II............  1.4S..........  .................  None..........  62............  None..........  25 kg.........  100 kg........  01............  25
                     Flares, aerial....       1.1G  UN0420...........  II............  1.1G..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  03............  25
                     Flares, aerial....       1.2G  UN0421...........  II............  1.2G..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  03............  25
 
                                                                                                              * * * * * * *
                     Flares, surface...       1.3G  UN0092...........  II............  1.3G..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  03............  25
                     Flares, surface...       1.1G  UN0418...........  II............  1.1G..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  03............  25
                     Flares, surface...       1.2G  UN0419...........  II............  1.2G..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  03............  25
 
                                                                                                              * * * * * * *
                     Flash powder......       1.1G  UN0094...........  II............  1.1G..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  03............  25
                     Flash powder......       1.3G  UN0305...........  II............  1.3G..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  03............  25
 
                                                                                                              * * * * * * *
                     Fracturing               1.1D  UN0099...........  II............  1.1D..........  .................  None..........  62............  62............  Forbidden.....  Forbidden.....  04............  25
                      devices,
                      explosive,
                      without
                      detonators for
                      oil wells.
 
                                                                                                              * * * * * * *
                     Fuel cell                   8  UN3477...........  ..............  8.............  328..............  230...........  230...........  230...........  5 kg..........  50 kg.........  A
                      cartridges or
                      Fuel cell
                      cartridges
                      contained in
                      equipment or Fuel
                      cell cartridges
                      packed with
                      equipment,
                      containing
                      corrosive
                      substances.
                     Fuel cell                   3  UN3473...........  ..............  3.............  328..............  230...........  230...........  230...........  5 kg..........  50 kg.........  A
                      cartridges or
                      Fuel cell
                      cartridges
                      contained in
                      equipment or Fuel
                      cell cartridges
                      packed with
                      equipment,
                      containing
                      flammable liquids.
                     Fuel cell                 2.1  UN3479...........  ..............  2.1...........  328..............  230...........  230...........  230...........  1 kg..........  15 kg.........  B
                      cartridges or
                      Fuel cell
                      cartridges
                      contained in
                      equipment or Fuel
                      cell cartridges
                      packed with
                      equipment,
                      containing
                      hydrogen in metal
                      hydride.
                     Fuel cell                 2.1  UN3478...........  ..............  2.1...........  328..............  230...........  230...........  230...........  1 kg..........  15 kg.........  B
                      cartridges or
                      Fuel cell
                      cartridges
                      contained in
                      equipment or Fuel
                      cell cartridges
                      packed with
                      equipment,
                      containing
                      liquefied
                      flammable gas.
                     Fuel cell                 4.3  UN3476...........  ..............  4.3...........  328..............  230...........  230...........  230...........  5 kg..........  50 kg.........  A
                      cartridges or
                      Fuel cell
                      cartridges
                      contained in
                      equipment or Fuel
                      cell cartridges
                      packed with
                      equipment,
                      containing water-
                      reactive
                      substances.
 
                                                                                                              * * * * * * *
                     Fuse, igniter            1.4G  UN0103...........  II............  1.4G..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  02............  25
                      tubular metal
                      clad.
                     Fuse, non-               1.3G  UN0101...........  II............  1.3G..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  03............  25
                      detonating
                      instantaneous or
                      quickmatch.
                     Fuse, safety......       1.4S  UN0105...........  II............  1.4S..........  .................  None..........  62............  None..........  25 kg.........  100 kg........  01............  25

[[Page 1056]]

 
 
                                                                                                              * * * * * * *
                     Fuzes, detonating.       1.1B  UN0106...........  II............  1.1B..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                     Fuzes, detonating.       1.2B  UN0107...........  II............  1.2B..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                     Fuzes, detonating.       1.4B  UN0257...........  II............  1.4B..........  116..............  None..........  62............  None..........  Forbidden.....  75 kg.........  05............  25
                     Fuzes, detonating.       1.4S  UN0367...........  II............  1.4S..........  116..............  None..........  62............  None..........  25 kg.........  100 kg........  01............  25
                     Fuzes, detonating,       1.1D  UN0408...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      with protective
                      features.
                     Fuzes, detonating,       1.2D  UN0409...........  II............  1.2D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      with protective
                      features.
                     Fuzes, detonating,       1.4D  UN0410...........  II............  1.4D..........  116..............  None..........  62............  None..........  Forbidden.....  75 kg.........  02............  25
                      with protective
                      features.
                     Fuzes, igniting...       1.3G  UN0316...........  II............  1.3G..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  03............  25
                     Fuzes, igniting...       1.4G  UN0317...........  II............  1.4G..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  02............  25
                     Fuzes, igniting...       1.4S  UN0368...........  II............  1.4S..........  .................  None..........  62............  None..........  25 kg.........  100 kg........  01............  25
 
                                                                                                              * * * * * * *
                     Gallium...........          8  UN2803...........  III...........  8.............  T1, TP33.........  None..........  162...........  240...........  20 kg.........  20 kg.........  B.............  25
 
                                                                                                              * * * * * * *
                     Gasoline includes           3  UN1203...........  II............  3.............  144, 177, B1,      150...........  202...........  242...........  5 L...........  60 L..........  E
                      gasoline mixed                                                                    B33, IB2, T4.
                      with ethyl
                      alcohol, with not
                      more than 10%
                      alcohol.
 
                                                                                                              * * * * * * *
                     Grenades, hand or        1.1D  UN0284...........  II............  1.1D..........  .................  ..............  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      rifle, with
                      bursting charge.
                     Grenades, hand or        1.2D  UN0285...........  II............  1.2D..........  .................  ..............  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      rifle, with
                      bursting charge.
                     Grenades, hand or        1.1F  UN0292...........  II............  1.1F..........  .................  ..............  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                      rifle, with
                      bursting charge.
                     Grenades, hand or        1.2F  UN0293...........  II............  1.2F..........  .................  ..............  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                      rifle, with
                      bursting charge.
 
                                                                                                              * * * * * * *
                     Grenades,                1.4S  UN0110...........  II............  1.4S..........  .................  ..............  62............  None..........  25 kg.........  100 kg........  01............  25
                      practice, hand or
                      rifle.
                     Grenades,                1.3G  UN0318...........  II............  1.3G..........  .................  ..............  62............  None..........  Forbidden.....  Forbidden.....  03............  25
                      practice, hand or
                      rifle.
                     Grenades,                1.2G  UN0372...........  II............  1.2G..........  .................  ..............  62............  None..........  Forbidden.....  Forbidden.....  03............  25
                      practice, hand or
                      rifle.
                     Grenades practice,       1.4G  UN0452...........  II............  1.4G..........  .................  ..............  62............  None..........  Forbidden.....  75 kg.........  02............  25
                      hand or rifle.
 
                                                                                                              * * * * * * *
                     Guanyl                   1.1A  UN0113...........  II............  1.1A..........  111, 117.........  None..........  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                      nitrosaminoguanyl
                      idene hydrazine,
                      wetted with not
                      less than 30
                      percent water, by
                      mass.
 

[[Page 1057]]

 
                                                                                                              * * * * * * *
                     Guanyl                   1.1A  UN0114...........  II............  1.1A..........  111, 117.........  None..........  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                      nitrosaminoguanyl
                      tetrazene, wetted
                      or Tetrazene,
                      wetted with not
                      less than 30
                      percent water or
                      mixture of
                      alcohol and
                      water, by mass.
 
                                                                                                              * * * * * * *
                     Hexanitrodiphenyla       1.1D  UN0079...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      mine or
                      Dipicrylamine or
                      Hexyl.
 
                                                                                                              * * * * * * *
                     Hexanitrostilbene.       1.1D  UN0392...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
 
                                                                                                              * * * * * * *
                     Hexolite, or             1.1D  UN0118...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      Hexotol dry or
                      wetted with less
                      than 15 percent
                      water, by mass.
 
                                                                                                              * * * * * * *
                     Hexotonal.........       1.1D  UN0393...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
 
                                                                                                              * * * * * * *
                     Hydrogen in a             2.1  UN3468...........  ..............  2.1...........  167..............  None..........  311...........  None..........  Forbidden.....  100 kg........  D
                      metal hydride
                      storage system or
                      Hydrogen in a
                      metal hydride
                      storage system
                      contained in
                      equipment or
                      Hydrogen in a
                      metal hydride
                      storage system
                      packed with
                      equipment.
 
                                                                                                              * * * * * * *
                     1-                       1.3C  UN0508...........  ..............  1.3C..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      Hydroxybenzotriaz
                      ole, anhydrous,
                      dry or wetted
                      with less than 20
                      percent water, by
                      mass.
 
                                                                                                              * * * * * * *
 G                   Hypochlorites,            5.1  UN3212...........  II............  5.1...........  349, A9, IB8,      152...........  212...........  240...........  5 kg..........  25 kg.........  D.............  4, 25, 52, 56,
                      inorganic, n.o.s.                                                                 IP2, IP4, T3,                                                                                                      58, 69, 106,
                                                                                                        TP33.                                                                                                              116, 118
 
                                                                                                              * * * * * * *
                     Igniters..........       1.1G  UN0121...........  II............  1.1G..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  03............  25
                     Igniters..........       1.2G  UN0314...........  II............  1.2G..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  03............  25
                     Igniters..........       1.3G  UN0315...........  II............  1.3G..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  03............  25
                     Igniters..........       1.4G  UN0325...........  II............  1.4G..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  02............  25
                     Igniters..........       1.4S  UN0454...........  II............  1.4S..........  .................  None..........  62............  None..........  25 kg.........  100 kg........  01............  25
 

[[Page 1058]]

 
                                                                                                              * * * * * * *
 G                   Isocyanates,              6.1  UN3080...........  II............  6.1, 3........  IB2, T11, TP2,     153...........  202...........  243...........  5 L...........  60 L..........  B.............  25, 40
                      toxic, flammable,                                                                 TP13, TP27.
                      n.o.s. or
                      Isocyanate
                      solutions, toxic,
                      flammable,
                      n.o.s., flash
                      point not less
                      than 23 degrees C
                      but not more than
                      61 degrees C and
                      boiling point
                      less than 300
                      degrees C.
 G                   Isocyanates,              6.1  UN2206...........  II............  6.1...........  IB2, T11, TP2,     153...........  202...........  243...........  5 L...........  60 L..........  E.............  25, 40
                      toxic, n.o.s. or                                                                  TP13, TP27.
                      Isocyanate
                      solutions, toxic,
                      n.o.s., flash
                      point more than
                      61 degrees C and
                      boiling point
                      less than 300
                      degrees C.
                     ..................  .........  .................  III...........  6.1...........  IB3, T7, TP1,      153...........  203...........  241...........  60 L..........  220 L.........  E.............  25, 40
                                                                                                        TP13, TP28.
                     Isocyanatobenzotri        6.1  UN2285...........  II............  6.1, 3........  5, IB2, T7, TP2..  153...........  202...........  243...........  5 L...........  60 L..........  D.............  25, 40
                      fluorides.
 
                                                                                                              * * * * * * *
                     Isosorbide-5-             4.1  UN3251...........  III...........  4.1...........  66, 159, IB8.....  151...........  223...........  240...........  Forbidden.....  Forbidden.....  D.............  12, 25, 40, 84
                      mononitrate.
 
                                                                                                              * * * * * * *
 D                   Jet perforating          1.1D  NA0124...........  II............  1.1D..........  55, 56...........  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      guns, charged oil
                      well, with
                      detonator.
 D                   Jet perforating          1.4D  NA0494...........  II............  1.4D..........  55, 56...........  None..........  62............  None..........  Forbidden.....  Forbidden.....  02............  25
                      guns, charged oil
                      well, with
                      detonator.
                     Jet perforating          1.4D  UN0494...........  II............  1.4D..........  55, 114..........  None..........  62............  None..........  Forbidden.....  300 kg........  02............  25
                      guns, charged,
                      oil well, without
                      detonator.
                     Jet perforating          1.1D  UN0124...........  II............  1.1D..........  55...............  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      guns, charged oil
                      well, without
                      detonator.
 
                                                                                                              * * * * * * *
                     Lead azide, wetted       1.1A  UN0129...........  II............  1.1A..........  111, 117.........  None..........  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                      with not less
                      than 20 percent
                      water or mixture
                      of alcohol and
                      water, by mass.
 
                                                                                                              * * * * * * *
                     Lead styphnate,          1.1A  UN0130...........  II............  1.1A..........  111, 117.........  None..........  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                      wetted or Lead
                      trinitroresorcina
                      te, wetted with
                      not less than 20
                      percent water or
                      mixture of
                      alcohol and
                      water, by mass.
 

[[Page 1059]]

 
                                                                                                              * * * * * * *
                     Lighters, fuse....       1.4S  UN0131...........  II............  1.4S..........  .................  None..........  62............  None..........  25 kg.........  100 kg........  01............  25
 
                                                                                                              * * * * * * *
                     Lithium battery...          9  UN3090...........  II............  9.............  29, 188, 189,      185...........  185...........  None..........  See A100......  35 kg.........  A
                                                                                                        190, A51, A54,
                                                                                                        A55, A100.
 
                                                                                                              * * * * * * *
                     Lithium batteries,          9  UN3091...........  II............  9.............  29, 188, 189,      185...........  185...........  None..........  See A101, A104  35 kg.........  A
                      contained in                                                                      190, 360, A54,
                      equipment.                                                                        A55, A101, A104.
                     Lithium batteries           9  UN3091...........  II............  9.............  29, 188, 189,      185...........  185...........  None..........  See A101,       35 kg.........  A
                      packed with                                                                       190, A54, A55,                                                     A103..
                      equipment.                                                                        A101, A103.
 
                                                                                                              * * * * * * *
                     Lithium                   5.1  UN1471...........  II............  5.1...........  A9, IB8, IP2,      152...........  212...........  240...........  5 kg..........  25 kg.........  A.............  4, 25, 52, 56,
                      hypochlorite, dry                                                                 IP4, N34, T3,                                                                                                      58, 69, 106,
                      or Lithium                                                                        TP33.                                                                                                              116
                      hypochlorite
                      mixture.
                     ..................  .........  .................  III...........  5.1...........  IB8, IP3, N34,     152...........  213...........  240...........  25 kg.........  100 kg........  A.............  4, 25, 52, 56,
                                                                                                        T1, TP33.                                                                                                          58, 69, 106,
                                                                                                                                                                                                                           116
 
                                                                                                              * * * * * * *
                     Magnesium nitrate.        5.1  UN1474...........  III...........  5.1...........  332, A1, B120,     152...........  213...........  240...........  25 kg.........  100 kg........  A
                                                                                                        IB8, IP3, T1,
                                                                                                        TP33.
 
                                                                                                              * * * * * * *
                     Mannitol                 1.1D  UN0133...........  II............  1.1D..........  121..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      hexanitrate,
                      wetted or
                      Nitromannite,
                      wetted with not
                      less than 40
                      percent water, or
                      mixture of
                      alcohol and
                      water, by mass.
 
                                                                                                              * * * * * * *
                     5-Mercaptotetrazol-      1.4C  UN0448...........  II............  1.4C..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  02............  25
                      1-acetic acid.
 
                                                                                                              * * * * * * *
 A W                 Mercury...........          8  UN2809...........  III...........  8, 6.1........  365..............  164...........  164...........  240...........  35 kg.........  35 kg.........  B.............  40, 97
 
                                                                                                              * * * * * * *
                     Mercury fulminate,       1.1A  UN0135...........  II............  1.1A..........  111, 117.........  None..........  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                      wetted with not
                      less than 20
                      percent water, or
                      mixture of
                      alcohol and
                      water, by mass.
 
                                                                                                              * * * * * * *
 +                   Methacrylonitrile,        6.1  UN3079...........  I.............  6.1, 3........  2, B9, B14, B32,   None..........  227...........  244...........  Forbidden.....  Forbidden.....  D.............  12, 25, 40
                      stabilized.                                                                       T20, TP2, TP13,
                                                                                                        TP38, TP45.
 

[[Page 1060]]

 
                                                                                                              * * * * * * *
                     Methyltrichlorosil          3  UN1250...........  II............  3, 8..........  A7, B6, B77, N34,  None..........  206...........  243...........  Forbidden.....  5 L...........  B.............  40
                      ane.                                                                              T10, TP2, TP7,
                                                                                                        TP13.
 
                                                                                                              * * * * * * *
                     Mines with               1.1F  UN0136...........  II............  1.1F..........  .................  ..............  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                      bursting charge.
                     Mines with               1.1D  UN0137...........  II............  1.1D..........  .................  ..............  62............  62............  Forbidden.....  Forbidden.....  04............  25
                      bursting charge.
                     Mines with               1.2D  UN0138...........  II............  1.2D..........  .................  ..............  62............  62............  Forbidden.....  Forbidden.....  04............  25
                      bursting charge.
                     Mines with               1.2F  UN0294...........  II............  1.2F..........  .................  ..............  62............  None..........  Forbidden.....  Forbidden.....  05............  25
                      bursting charge.
 
                                                                                                              * * * * * * *
                     Naphthalene, crude        4.1  UN1334...........  III...........  4.1...........  A1, B120,IB8,      151...........  213...........  240...........  25 kg.........  100 kg........  A
                      or Naphthalene,                                                                   IP3, T1, TP33.
                      refined.
 
                                                                                                              * * * * * * *
                     Nitro urea........       1.1D  UN0147...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
 
                                                                                                              * * * * * * *
                     5-                       1.1D  UN0385...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      Nitrobenzotriazol.
 
                                                                                                              * * * * * * *
                     Nitrocellulose,          1.1D  UN0340...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25, 27E
                      dry or wetted
                      with less than 25
                      percent water (or
                      alcohol), by mass.
 
                                                                                                              * * * * * * *
                     Nitrocellulose,          1.3C  UN0343...........  II............  1.3C..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      plasticized with
                      not less than 18
                      percent
                      plasticizing
                      substance, by
                      mass.
 
                                                                                                              * * * * * * *
                     Nitrocellulose,          1.1D  UN0341...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25, 27E
                      unmodified or
                      plasticized with
                      less than 18
                      percent
                      plasticizing
                      substance, by
                      mass.
                     Nitrocellulose,          1.3C  UN0342...........  II............  1.3C..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      wetted with not
                      less than 25
                      percent alcohol,
                      by mass.
 
                                                                                                              * * * * * * *
                     Nitroglycerin,           1.1D  UN0143...........  II............  1.1D, 6.1.....  125..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25, 21E
                      desensitized with
                      not less than 40
                      percent non-
                      volatile water
                      insoluble
                      phlegmatizer, by
                      mass.
 

[[Page 1061]]

 
                                                                                                              * * * * * * *
                     Nitroglycerin,           1.1D  UN0144...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25, 21E
                      solution in
                      alcohol, with
                      more than 1
                      percent but not
                      more than 10
                      percent
                      nitroglycerin.
 
                                                                                                              * * * * * * *
                     Nitroguanidine or        1.1D  UN0282...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      Picrite, dry or
                      wetted with less
                      than 20 percent
                      water, by mass.
 
                                                                                                              * * * * * * *
                     Nitrostarch, dry         1.1D  UN0146...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      or wetted with
                      less than 20
                      percent water, by
                      mass.
 
                                                                                                              * * * * * * *
                     Nitrotriazolone or       1.1D  UN0490...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      NTO.
 
                                                                                                              * * * * * * *
                     Octolite or Octol,       1.1D  UN0266...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      dry or wetted
                      with less than 15
                      percent water, by
                      mass.
                     Octonal...........       1.1D  UN0496...........  ..............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
 
                                                                                                              * * * * * * *
 D G                 Other regulated             9  NA3082...........  III...........  9.............  IB3, T2, TP1.....  155...........  203...........  241...........  No limit......  No limit......  A
                      substances,
                      liquid, n.o.s.
 
                                                                                                              * * * * * * *
                     Paraformaldehyde..        4.1  UN2213...........  III...........  4.1...........  A1, B120, IB8,     151...........  213...........  240...........  25 kg.........  100 kg........  A
                                                                                                        IP3, T1, TP33.
 
                                                                                                              * * * * * * *
                     Pentaerythrite           1.1D  UN0411...........  II............  1.1D..........  120..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      tetranitrate or
                      Pentaerythritol
                      tetranitrate or
                      PETN, with not
                      less than 7
                      percent wax by
                      mass.
                     Pentaerythrite           1.1D  UN0150...........  II............  1.1D..........  121..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      tetranitrate,
                      wetted or
                      Pentaerythritol
                      tetranitrate,
                      wetted, or PETN,
                      wetted with not
                      less than 25
                      percent water, by
                      mass, or
                      Pentaerythrite
                      tetranitrate, or
                      Pentaerythritol
                      tetranitrate or
                      PETN,
                      desensitized with
                      not less than 15
                      percent
                      phlegmatizer by
                      mass.
 
                                                                                                              * * * * * * *
                     Pentolite, dry or        1.1D  UN0151...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  04............  25
                      wetted with less
                      than 15 percent
                      water, by mass.
 
                                                                                                              * * * * * * *
                     Phosgene..........        2.3  UN1076...........  ..............  2.3, 8........  1, B7, B46, N86..  None..........  192...........  314...........  Forbidden.....  Forbidden.....  D.............  40
 

[[Page 1062]]

 
                                                                                                              * * * * * * *
                     Phosphorous acid..          8  UN2834...........  III...........  8.............  IB8, IP3, T1,      154...........  213...........  240...........  25 kg.........  100 kg........  A.............  25
                                                                                                        TP33.
 
                                                                                                              * * * * * * *
                     Plastic molding             9  UN3314...........  III...........  9.............  32, IB8, IP3, IP7  155...........  221...........  221...........  100 kg........  200 kg........  E.............  21, 25, 87,
                      compound in                                                                                                                                                                                          144
                      dough, sheet or
                      extruded rope
                      form evolving
                      flammable vapor.
 
                                                                                                              * * * * * * *
                     Polymeric beads             9  UN2211...........  III...........  9.............  32, IB8, IP3,      155...........  221...........  221...........  100 kg........  200 kg........  E.............  21, 25, 87,
                      expandable,                                                                       IP7, T1, TP33.                                                                                                     144
                      evolving
                      flammable vapor.
 
                                                                                                              * * * * * * *
                     Potassium nitrate.        5.1  UN1486...........  III...........  5.1...........  A1, A29, B120      152...........  213...........  240...........  25 kg.........  100 kg........  A
                                                                                                        IB8, IP3, T1,
                                                                                                        TP33, W1.
 
                                                                                                              * * * * * * *
                     Powder cake,             1.1C  UN0433...........  II............  1.1C..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25
                      wetted or Powder
                      paste, wetted
                      with not less
                      than 17 percent
                      alcohol by mass.
                     Powder cake,             1.3C  UN0159...........  II............  1.3C..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25
                      wetted or Powder
                      paste, wetted
                      with not less
                      than 25 percent
                      water, by mass.
 
                                                                                                              * * * * * * *
                     Powder, smokeless.       1.1C  UN0160...........  II............  1.1C..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25, 26E
                     Powder, smokeless.       1.3C  UN0161...........  II............  1.3C..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25, 26E
                     Powder, smokeless.       1.4C  UN0509...........  ..............  1.4C..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  2.............  25
 
                                                                                                              * * * * * * *
                     Primers, cap type.       1.4S  UN0044...........  II............  None..........  .................  None..........  62............  None..........  25 kg.........  100 kg........  1.............  25
                     Primers, cap type.       1.1B  UN0377...........  II............  1.1B..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  5.............  25
                     Primers, cap type.       1.4B  UN0378...........  II............  1.4B..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  5.............  25
 
                                                                                                              * * * * * * *
                     Primers, tubular..       1.3G  UN0319...........  II............  1.3G..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  3.............  25
                     Primers, tubular..       1.4G  UN0320...........  II............  1.4G..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  2.............  25
                     Primers, tubular..       1.4S  UN0376...........  II............  None..........  .................  None..........  62............  None..........  25 kg.........  100 kg........  1.............  25
 
                                                                                                              * * * * * * *
                     Projectiles,             1.4S  UN0345...........  II............  1.4S..........  .................  ..............  62............  62............  25 kg.........  100 kg........  1.............  25
                      inert, with
                      tracer.
                     Projectiles,             1.3G  UN0424...........  II............  1.3G..........  .................  ..............  62............  62............  Forbidden.....  Forbidden.....  3.............  25
                      inert, with
                      tracer.
                     Projectiles,             1.4G  UN0425...........  II............  1.4G..........  .................  ..............  62............  62............  Forbidden.....  75 kg.........  2.............  25
                      inert, with
                      tracer.
                     Projectiles, with        1.2D  UN0346...........  II............  1.2D..........  .................  ..............  62............  62............  Forbidden.....  Forbidden.....  4.............  25
                      burster or
                      expelling charge.
                     Projectiles, with        1.4D  UN0347...........  II............  1.4D..........  .................  ..............  62............  62............  Forbidden.....  75 kg.........  2.............  25
                      burster or
                      expelling charge.

[[Page 1063]]

 
                     Projectiles, with        1.2F  UN0426...........  II............  1.2F..........  .................  ..............  62............  None..........  Forbidden.....  Forbidden.....  5.............  25
                      burster or
                      expelling charge.
                     Projectiles, with        1.4F  UN0427...........  II............  1.4F..........  .................  ..............  62............  None..........  Forbidden.....  Forbidden.....  5.............  25
                      burster or
                      expelling charge.
                     Projectiles, with        1.2G  UN0434...........  II............  1.2G..........  .................  ..............  62............  62............  Forbidden.....  Forbidden.....  3.............  25
                      burster or
                      expelling charge.
                     Projectiles, with        1.4G  UN0435...........  II............  1.4G..........  .................  ..............  62............  62............  Forbidden.....  75 kg.........  2.............  25
                      burster or
                      expelling charge.
                     Projectiles, with        1.1F  UN0167...........  II............  1.1F..........  .................  ..............  62............  None..........  Forbidden.....  Forbidden.....  5.............  25
                      bursting charge.
                     Projectiles, with        1.1D  UN0168...........  II............  1.1D..........  .................  ..............  62............  62............  Forbidden.....  Forbidden.....  4.............  25
                      bursting charge.
                     Projectiles, with        1.2D  UN0169...........  II............  1.2D..........  .................  ..............  62............  62............  Forbidden.....  Forbidden.....  4.............  25
                      bursting charge.
                     Projectiles, with        1.2F  UN0324...........  II............  1.2F..........  .................  ..............  62............  None..........  Forbidden.....  Forbidden.....  5.............  25
                      bursting charge.
                     Projectiles, with        1.4D  UN0344...........  II............  1.4D..........  .................  ..............  62............  62............  Forbidden.....  75 kg.........  2.............  25
                      bursting charge.
 
                                                                                                              * * * * * * *
                     Propellant, liquid       1.3C  UN0495...........  II............  1.3C..........  37...............  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25
                     Propellant, liquid       1.1C  UN0497...........  II............  1.1C..........  37...............  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25
                     Propellant, solid.       1.1C  UN0498...........  II............  1.1C..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25, 26E
                     Propellant, solid.       1.3C  UN0499...........  II............  1.3C..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25, 26E
                     Propellant, solid.       1.4C  UN0501...........  ..............  1.4C..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  2.............  25, 24E
 
                                                                                                              * * * * * * *
                     Propylene                 6.1  UN2611...........  II............  6.1, 3........  IB2, T7, TP2,      153...........  202...........  243...........  5 L...........  60 L..........  A.............  12, 25, 40
                      chlorohydrin.                                                                     TP13.
 
                                                                                                              * * * * * * *
                     RDX and HMX              1.1D  UN0391...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25
                      mixtures, wetted
                      with not less
                      than 15 percent
                      water by mass or
                      RDX and HMX
                      mixtures,
                      desensitized with
                      not less than 10
                      percent
                      phlegmatizer by
                      mass.
 
                                                                                                              * * * * * * *
                     Release devices,         1.4S  UN0173...........  II............  1.4S..........  .................  None..........  62............  62............  25 kg.........  100 kg........  1.............  25
                      explosive.
 
                                                                                                              * * * * * * *
                     Rivets, explosive.       1.4S  UN0174...........  II............  1.4S..........  .................  None..........  62............  62............  25 kg.........  100 kg........  1.............  25
 
                                                                                                              * * * * * * *
                     Rocket motors.....       1.3C  UN0186...........  II............  1.3C..........  109..............  None..........  62............  62............  Forbidden.....  220 kg........  4.............  25
                     Rocket motors.....       1.1C  UN0280...........  II............  1.1C..........  109..............  None..........  62............  62............  Forbidden.....  Forbidden.....  4.............  25
                     Rocket motors.....       1.2C  UN0281...........  II............  1.2C..........  109..............  None..........  62............  62............  Forbidden.....  Forbidden.....  4.............  25
                     Rocket motors,           1.2J  UN0395...........  II............  1.2J..........  109..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  5.............  25, 23E
                      liquid fueled.
                     Rocket motors,           1.3J  UN0396...........  II............  1.3J..........  109..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  5.............  25, 23E
                      liquid fueled.
                     Rocket motors with       1.3L  UN0250...........  II............  1.3L..........  109..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  5.............  25, 14E, 15E
                      hypergolic
                      liquids with or
                      without an
                      expelling charge.
                     Rocket motors with       1.2L  UN0322...........  II............  1.2L..........  109..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  5.............  25, 14E, 15E
                      hypergolic
                      liquids with or
                      without an
                      expelling charge.
                     Rockets, line-           1.2G  UN0238...........  II............  1.2G..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  3.............  25
                      throwing.
                     Rockets, line-           1.3G  UN0240...........  II............  1.3G..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  3.............  25
                      throwing.
                     Rockets, line-           1.4G  UN0453...........  II............  1.4G..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  2.............  25
                      throwing.

[[Page 1064]]

 
                     Rockets, liquid          1.1J  UN0397...........  II............  1.1J..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  5.............  25, 23E
                      fueled with
                      bursting charge.
                     Rockets, liquid          1.2J  UN0398...........  II............  1.2J..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  5.............  25, 23E
                      fueled with
                      bursting charge.
                     Rockets, with            1.1F  UN0180...........  II............  1.1F..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  5.............  25
                      bursting charge.
                     Rockets, with            1.1E  UN0181...........  II............  1.1E..........  .................  None..........  62............  62............  Forbidden.....  Forbidden.....  4.............  25
                      bursting charge.
                     Rockets, with            1.2E  UN0182...........  II............  1.2E..........  .................  None..........  62............  62............  Forbidden.....  Forbidden.....  4.............  25
                      bursting charge.
                     Rockets, with            1.2F  UN0295...........  II............  1.2F..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  5.............  25
                      bursting charge.
                     Rockets, with            1.2C  UN0436...........  II............  1.2C..........  .................  None..........  62............  62............  Forbidden.....  Forbidden.....  4.............  25
                      expelling charge.
                     Rockets, with            1.3C  UN0437...........  II............  1.3C..........  .................  None..........  62............  62............  Forbidden.....  Forbidden.....  4.............  25
                      expelling charge.
                     Rockets, with            1.4C  UN0438...........  II............  1.4C..........  .................  None..........  62............  62............  Forbidden.....  75 kg.........  2.............  25
                      expelling charge.
                     Rockets, with            1.3C  UN0183...........  II............  1.3C..........  .................  None..........  62............  62............  Forbidden.....  Forbidden.....  4.............  25
                      inert head.
                     Rockets, with            1.2C  UN0502...........  ..............  1.2C..........  .................  None..........  62............  62............  Forbidden.....  Forbidden.....  2.............  25, 5E
                      inert head.
 
                                                                                                              * * * * * * *
 G                   Samples,            .........  UN0190...........  II............  ..............  113..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  5.............  25
                      explosive, other
                      than initiating
                      explosives.
 
                                                                                                              * * * * * * *
                     Seed cake,                4.2  UN1386...........  III...........  None..........  IB8, IP3, IP7, N7  None..........  213...........  241...........  Forbidden.....  Forbidden.....  A.............  13, 25
                      containing
                      vegetable oil
                      solvent
                      extractions and
                      expelled seeds,
                      with not more
                      than 10 percent
                      of oil and when
                      the amount of
                      moisture is
                      higher than 11
                      percent, with not
                      more than 20
                      percent of oil
                      and moisture
                      combined.
 I                   Seed cake with            4.2  UN1386...........  III...........  None..........  IB8, IP3, IP7, N7  None..........  213...........  241...........  Forbidden.....  Forbidden.....  E.............  13, 25
                      more than 1.5
                      percent oil and
                      not more than 11
                      percent moisture.
 I                   Seed cake with not        4.2  UN2217...........  III...........  None..........  IB8, IP3, IP7, N7  None..........  213...........  241...........  Forbidden.....  Forbidden.....  A.............  13, 25
                      more than 1.5
                      percent oil and
                      not more than 11
                      percent moisture.
 
                                                                                                              * * * * * * *
                     Signal devices,          1.4G  UN0191...........  II............  1.4G..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  2.............  25
                      hand.
                     Signal devices,          1.4S  UN0373...........  II............  1.4S..........  .................  None..........  62............  None..........  25 kg.........  100 kg........  1.............  25
                      hand.
                     Signals, distress,       1.1G  UN0194...........  II............  1.1G..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  3.............  25
                      ship.
                     Signals, distress,       1.3G  UN0195...........  II............  1.3G..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  3.............  25
                      ship.
                     Signals, distress,       1.4G  UN0505...........  ..............  1.4G..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  2.............  25
                      ship.
                     Signals, distress,       1.4S  UN0506...........  ..............  1.4S..........  .................  None..........  62............  None..........  25 kg.........  100 kg........  1.............  25
                      ship.
 

[[Page 1065]]

 
                                                                                                              * * * * * * *
                     Signals, railway         1.1G  UN0192...........  II............  1.1G..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  3.............  25
                      track,.
                     explosive.........
                     Signals, railway         1.4S  UN0193...........  II............  1.4S..........  .................  None..........  62............  None..........  25 kg.........  100 kg........  1.............  25
                      track,.
                     explosive.........
                     Signals, railway         1.3G  UN0492...........  ..............  1.3G..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  3.............  25
                      track,.
                     explosive.........
                     Signals, railway         1.4G  UN0493...........  ..............  1.4G..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  2.............  25
                      track,.
                     explosive.........
 
                                                                                                              * * * * * * *
                     Signals, smoke....       1.1G  UN0196...........  II............  1.1G..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  3.............  25
                     Signals, smoke....       1.4G  UN0197...........  II............  1.4G..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  2.............  25
                     Signals, smoke....       1.2G  UN0313...........  II............  1.2G..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  3.............  25
                     Signals, smoke....       1.3G  UN0487...........  II............  1.3G..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  3.............  25
                     Signals, smoke....       1.4S  UN0507...........  ..............  1.4S..........  .................  None..........  62............  None..........  25 kg.........  100 kg........  1.............  25
 
                                                                                                              * * * * * * *
                     Sodium carbonate          5.1  UN3378...........  II............  5.1...........  B120, IB8, IP2,    152...........  212...........  240...........  5 kg..........  25 kg.........  A.............  13, 25, 75
                      peroxyhydrate.                                                                    IP4, T3, TP33.
                     ..................  .........  .................  III...........  5.1...........  B120, IB8, IP3,    152...........  213...........  240...........  25 kg.........  100 kg........  A.............  13, 25, 75
                                                                                                        T1, TP33.
 
                                                                                                              * * * * * * *
                     Sodium dinitro-o-        1.3C  UN0234...........  II............  1.3C..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25, 5E
                      cresolate, dry or
                      wetted with less
                      than 15 percent
                      water, by mass.
 
                                                                                                              * * * * * * *
                     Sodium nitrate....        5.1  UN1498...........  III...........  5.1...........  A1, A29, B120,     152...........  213...........  240...........  25 kg.........  100 kg........  A
                                                                                                        IB8, IP3, T1,
                                                                                                        TP33, W1.
                     Sodium nitrate and        5.1  UN1499...........  III...........  5.1...........  A1, A29, B120,     152...........  213...........  240...........  25 kg.........  100 kg........  A
                      potassium nitrate                                                                 IB8, IP3, T1,
                      mixtures.                                                                         TP33, W1.
 
                                                                                                              * * * * * * *
                     Sodium perborate          5.1  UN3377...........  III...........  5.1...........  B120, IB8, IP3,    152...........  213...........  240...........  25 kg.........  100 kg........  A.............  13, 25, 75
                      monohydrate.                                                                      T1, TP33.
 
                                                                                                              * * * * * * *
                     Sodium picramate,        1.3C  UN0235...........  II............  1.3C..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25, 5E
                      dry or wetted
                      with less than 20
                      percent water, by
                      mass.
 
                                                                                                              * * * * * * *
                     Sounding devices,        1.2F  UN0204...........  II............  1.2F..........  .................  None..........  62............  62............  Forbidden.....  Forbidden.....  5.............  25
                      explosive.
                     Sounding devices,        1.1F  UN0296...........  II............  1.1F..........  .................  None..........  62............  62............  Forbidden.....  Forbidden.....  5.............  25
                      explosive.
                     Sounding devices,        1.1D  UN0374...........  II............  1.1D..........  .................  None..........  62............  62............  Forbidden.....  Forbidden.....  4.............  25
                      explosive.
                     Sounding devices,        1.2D  UN0375...........  II............  1.2D..........  .................  None..........  62............  62............  Forbidden.....  Forbidden.....  4.............  25
                      explosive.
 
                                                                                                              * * * * * * *
 G                   Substances,              1.1L  UN0357...........  II............  1.1L..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  5.............  25, 14E, 15E
                      explosive, n.o.s.
 G                   Substances,              1.2L  UN0358...........  II............  1.2L..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  5.............  25, 14E, 15E
                      explosive, n.o.s.
 G                   Substances,              1.3L  UN0359...........  II............  1.3L..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  5.............  25, 14E, 15E
                      explosive, n.o.s.

[[Page 1066]]

 
 G                   Substances,              1.1A  UN0473...........  II............  1.1A..........  101, 111.........  None..........  62............  None..........  Forbidden.....  Forbidden.....  5.............  25
                      explosive, n.o.s.
 G                   Substances,              1.1C  UN0474...........  II............  1.1C..........  101..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25
                      explosive, n.o.s.
 G                   Substances,              1.1D  UN0475...........  II............  1.1D..........  101..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25
                      explosive, n.o.s.
 G                   Substances,              1.1G  UN0476...........  II............  1.1G..........  101..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  3.............  25
                      explosive, n.o.s.
 G                   Substances,              1.3C  UN0477...........  II............  1.3C..........  101..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25
                      explosive, n.o.s.
 G                   Substances,              1.3G  UN0478...........  II............  1.3G..........  101..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  3.............  25
                      explosive, n.o.s.
 G                   Substances,              1.4C  UN0479...........  II............  1.4C..........  101..............  None..........  62............  None..........  Forbidden.....  75 kg.........  2.............  25
                      explosive, n.o.s.
 G                   Substances,              1.4D  UN0480...........  II............  1.4D..........  101..............  None..........  62............  None..........  Forbidden.....  75 kg.........  2.............  25
                      explosive, n.o.s.
 G                   Substances,              1.4S  UN0481...........  II............  1.4S..........  101..............  None..........  62............  None..........  25 kg.........  75 kg.........  1.............  25
                      explosive, n.o.s.
 G                   Substances,              1.4G  UN0485...........  II............  1.4G..........  101..............  None..........  62............  None..........  Forbidden.....  75 kg.........  2.............  25
                      explosive, n.o.s.
 G                   Substances,              1.5D  UN0482...........  II............  1.5D..........  101..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  3.............  25
                      explosive, very
                      insensitive,
                      n.o.s. or
                      Substances, EVI,
                      n.o.s.
 
                                                                                                              * * * * * * *
 D                   Sulfur............          9  NA1350...........  III...........  9.............  30, B120, IB8,     None..........  None..........  240...........  No Limit......  No Limit......  A.............  25, 74
                                                                                                        IP2.
 I                   Sulfur............        4.1  UN1350...........  III...........  4.1...........  30, B120, IB8,     None..........  None..........  240...........  25 kg.........  100 kg........  A.............  25, 74
                                                                                                        IP3, T1, TP33.
 
                                                                                                              * * * * * * *
                     Tetranitroaniline.       1.1D  UN0207...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25
 
                                                                                                              * * * * * * *
                     Tetrazol-1-acetic        1.4C  UN0407...........  II............  1.4C..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  2.............  25
                      acid.
                     1H-Tetrazole......       1.1D  UN0504...........  ..............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25, 5E
 
                                                                                                              * * * * * * *
 G                   Thallium                  6.1  UN1707...........  II............  6.1...........  IB8, IP2, IP4,     153...........  212...........  242...........  25 kg.........  100 kg........  A
                      compounds, n.o.s.                                                                 T3, TP33.
 
                                                                                                              * * * * * * *
                     Torpedoes, liquid        1.3J  UN0450...........  II............  1.3J..........  .................  ..............  62............  None..........  Forbidden.....  Forbidden.....  5.............  25, 23E
                      fueled, with
                      inert head.
                     Torpedoes, liquid        1.1J  UN0449...........  II............  1.1J..........  .................  ..............  62............  None..........  Forbidden.....  Forbidden.....  5.............  25, 23E
                      fueled, with or
                      without bursting
                      charge.
                     Torpedoes with           1.1E  UN0329...........  II............  1.1E..........  .................  ..............  62............  62............  Forbidden.....  Forbidden.....  4.............  25
                      bursting charge.
                     Torpedoes with           1.1F  UN0330...........  II............  1.1F..........  .................  ..............  62............  None..........  Forbidden.....  Forbidden.....  5.............  25
                      bursting charge.
                     Torpedoes with           1.1D  UN0451...........  II............  1.1D..........  .................  ..............  62............  62............  Forbidden.....  Forbidden.....  4.............  25
                      bursting charge.
 
                                                                                                              * * * * * * *
 D                   Toy Caps..........       1.4S  NA0337...........  II............  1.4S..........  .................  None..........  62............  None..........  25 kg.........  100 kg........  1.............  25

[[Page 1067]]

 
                     Tracers for              1.3G  UN0212...........  II............  1.3G..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  3.............  25
                      ammunition.
                     Tracers for              1.4G  UN0306...........  II............  1.4G..........  .................  None..........  62............  None..........  Forbidden.....  75 kg.........  2.............  25
                      ammunition.
 
                                                                                                              * * * * * * *
                     Trimethylchlorosil          3  UN1298...........  II............  3, 8..........  A3, A7, B77, N34,  None..........  206...........  243...........  Forbidden.....  5 L...........  E.............  40
                      ane.                                                                              T10, TP2, TP7,
                                                                                                        TP13.
 
                                                                                                              * * * * * * *
                     Trinitro-m-cresol.       1.1D  UN0216...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25, 5E
 
                                                                                                              * * * * * * *
                     Trinitroaniline or       1.1D  UN0153...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25
                      Picramide.
                     Trinitroanisole...       1.1D  UN0213...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25
 
                                                                                                              * * * * * * *
                     Trinitrobenzene,         1.1D  UN0214...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25
                      dry or wetted
                      with less than 30
                      percent water, by
                      mass.
 
                                                                                                              * * * * * * *
                     Trinitrobenzenesul       1.1D  UN0386...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25, 5E
                      fonic acid.
                     Trinitrobenzoic          1.1D  UN0215...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25
                      acid, dry or
                      wetted with less
                      than 30 percent
                      water, by mass.
 
                                                                                                              * * * * * * *
                     Trinitrochlorobenz       1.1D  UN0155...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25
                      ene or Picryl
                      chloride.
 
                                                                                                              * * * * * * *
                     Trinitrofluorenone       1.1D  UN0387...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25
 
                                                                                                              * * * * * * *
                     Trinitronaphthalen       1.1D  UN0217...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25
                      e.
                     Trinitrophenetole.       1.1D  UN0218...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25
 
                                                                                                              * * * * * * *
                     Trinitrophenol or        1.1D  UN0154...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25, 5E
                      Picric acid, dry
                      or wetted with
                      less than 30
                      percent water, by
                      mass.
 
                                                                                                              * * * * * * *
                     Trinitrophenylmeth       1.1D  UN0208...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25
                      ylnitramine or
                      Tetryl.
                     Trinitroresorcinol       1.1D  UN0219...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25, 5E
                      or Styphnic acid,
                      dry or wetted
                      with less than 20
                      percent water, or
                      mixture of
                      alcohol and
                      water, by mass.
                     Trinitroresorcinol       1.1D  UN0394...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25, 5E
                      , wetted or
                      Styphnic acid,
                      wetted with not
                      less than 20
                      percent water, or
                      mixture of
                      alcohol and water
                      by mass.
 

[[Page 1068]]

 
                                                                                                              * * * * * * *
                     Trinitrotoluene          1.1D  UN0388...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25
                      and
                      Trinitrobenzene
                      mixtures or TNT
                      and
                      trinitrobenzene
                      mixtures or TNT
                      and
                      hexanitrostilbene
                      mixtures or
                      Trinitrotoluene
                      and
                      hexanitrostilnene
                      mixtures.
                     Trinitrotoluene          1.1D  UN0389...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25
                      mixtures
                      containing
                      Trinitrobenzene
                      and
                      Hexanitrostilbene
                      or TNT mixtures
                      containing
                      trinitrobenzene
                      and
                      hexanitrostilbene.
                     Trinitrotoluene or       1.1D  UN0209...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25
                      TNT, dry or
                      wetted with less
                      than 30 percent
                      water, by mass.
 
                                                                                                              * * * * * * *
                     Tritonal..........       1.1D  UN0390...........  II............  1.1D..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25
 
                                                                                                              * * * * * * *
                     Urea nitrate, dry        1.1D  UN0220...........  II............  1.1D..........  119..............  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25
                      or wetted with
                      less than 20
                      percent water, by
                      mass.
 
                                                                                                              * * * * * * *
                     Vehicle, flammable          9  UN3166...........  ..............  9.............  135, A200........  220...........  220...........  220...........  Forbidden.....  No limit......  A
                      gas powered or
                      Vehicle, fuel
                      cell, flammable
                      gas powered.
                     Vehicle, flammable          9  UN3166...........  ..............  9.............  135, A200........  220...........  220...........  220...........  No limit......  No limit......  A
                      liquid powered or
                      Vehicle, fuel
                      cell, flammable
                      liquid powered.
 
                                                                                                              * * * * * * *
                     Warheads, rocket         1.4D  UN0370...........  II............  1.4D..........  .................  None..........  62............  62............  Forbidden.....  75 kg.........  2.............  25
                      with burster or
                      expelling charge.
                     Warheads, rocket         1.4F  UN0371...........  II............  1.4F..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  5.............  25
                      with burster or
                      expelling charge.
                     Warheads, rocket         1.1D  UN0286...........  II............  1.1D..........  .................  None..........  62............  62............  Forbidden.....  Forbidden.....  4.............  25
                      with bursting
                      charge.
                     Warheads, rocket         1.2D  UN0287...........  II............  1.2D..........  .................  None..........  62............  62............  Forbidden.....  Forbidden.....  4.............  25
                      with bursting
                      charge.
                     Warheads, rocket         1.1F  UN0369...........  II............  1.1F..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  5.............  25
                      with bursting
                      charge.
                     Warheads, torpedo        1.1D  UN0221...........  II............  1.1D..........  .................  None..........  62............  62............  Forbidden.....  Forbidden.....  4.............  25
                      with bursting
                      charge.

[[Page 1069]]

 
 G                   Water-reactive            4.3  UN3129...........  I.............  4.3, 8........  T14, TP2, TP7,     None..........  201...........  243...........  Forbidden.....  1 L...........  D
                      liquid,                                                                           TP13.
                      corrosive, n.o.s.
                     ..................  .........  .................  II............  4.3, 8........  IB1, T11, TP2,     None..........  202...........  243...........  1 L...........  5 L...........  E.............  85
                                                                                                        TP7.
                     ..................  .........  .................  III...........  4.3, 8........  IB2, T7, TP2, TP7  None..........  203...........  242...........  5 L...........  60 L..........  E
 
                                                                                                              * * * * * * *
 G                   Water-reactive            4.3  UN3148...........  I.............  4.3...........  T13, TP2, TP7,     None..........  201...........  244...........  Forbidden.....  1 L...........  E.............  40
                      liquid, n.o.s.                                                                    TP41.
                     ..................  .........  .................  II............  4.3...........  IB1, T7, TP2, TP7  None..........  202...........  243...........  1 L...........  5 L...........  E.............  40
                     ..................  .........  .................  III...........  4.3...........  IB2, T7, TP2, TP7  None..........  203...........  242...........  5 L...........  60 L..........  E.............  40
 
                                                                                                              * * * * * * *
                     Zirconium                1.3C  UN0236...........  II............  1.3C..........  .................  None..........  62............  None..........  Forbidden.....  Forbidden.....  4.............  25, 5E
                      picramate, dry or
                      wetted with less
                      than 20 percent
                      water, by mass.
 
                                                                                                              * * * * * * *
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


[[Page 1070]]


0
6. In Sec.  172.102:
0
a. In paragraph (c)(1), special provisions 47, 48, 49, 118, 134, 155, 
and 237 are revised and special provisions 101, 222, 238, 328, 360, 
361, 362 and 365 are added in numerical sequence.
0
b. In paragraph (c)(2), special provisions A60, A100 and A103 are 
revised and special provisions A51, A189, A191, and A200 are added in 
numerical sequence.
0
c. In paragraph (c)(3), special provision B120 is added in numerical 
sequence.
0
d. In paragraph (c)(4), Table 1 is revised.
0
e. Paragraph (c)(7)(iii) is revised.
0
f. In paragraph (c)(8)(ii), TP39, TP40 and TP41 are added in numerical 
sequence.
0
g. In paragraph (c)(9), W10 is added in numerical sequence.
    The additions and revisions read as follows:


Sec.  172.102  Special Provisions.

* * * * *
    (c) * * *
    (1) * * *
    47 Mixtures of solids that are not subject to this subchapter and 
flammable liquids may be transported under this entry without first 
applying the classification criteria of Division 4.1, provided there is 
no free liquid visible at the time the material is loaded or at the 
time the packaging or transport unit is closed. Except when the liquids 
are fully absorbed in solid material contained in sealed bags, for 
single packagings, each packaging must correspond to a design type that 
has passed a leakproofness test at the Packing Group II level. Small 
inner packagings consisting of sealed packets and articles containing 
less than 10 mL of a Class 3 liquid in Packing Group II or III absorbed 
onto a solid material are not subject to this subchapter provided there 
is no free liquid in the packet or article.
    48 Mixtures of solids that are not subject to this subchapter and 
toxic liquids may be transported under this entry without first 
applying the classification criteria of Division 6.1, provided there is 
no free liquid visible at the time the material is loaded or at the 
time the packaging or transport unit is closed. For single packagings, 
each packaging must correspond to a design type that has passed a 
leakproofness test at the Packing Group II level. This entry may not be 
used for solids containing a Packing Group I liquid.
    49 Mixtures of solids that are not subject to this subchapter and 
corrosive liquids may be transported under this entry without first 
applying the classification criteria of Class 8, provided there is no 
free liquid visible at the time the material is loaded or at the time 
the packaging or transport unit is closed. For single packagings, each 
packaging must correspond to a design type that has passed a 
leakproofness test at the Packing Group II level.
* * * * *
    101 The name of the particular substance or article must be 
specified.
* * * * *
    118 This substance may not be transported under the provisions of 
Division 4.1 unless specifically authorized by the Associate 
Administrator (see UN0143 or UN0150 as appropriate).
* * * * *
    134 This entry only applies to vehicles powered by wet batteries, 
sodium batteries, or lithium batteries and equipment powered by wet 
batteries or sodium batteries that are transported with these batteries 
installed. For the purpose of this special provision, vehicles are 
self-propelled apparatus designed to carry one or more persons or 
goods. Examples of such vehicles are electrically-powered cars, 
motorcycles, scooters, three- and four-wheeled vehicles or motorcycles, 
battery-assisted bicycles, lawn tractors, boats, aircraft, wheelchairs 
and other mobility aids. Examples of equipment are lawnmowers, cleaning 
machines or model boats and model aircraft. Equipment powered by 
lithium batteries must be consigned under the entries ``Lithium 
batteries contained in equipment'' or ``Lithium batteries packed with 
equipment,'' as appropriate. Self-propelled vehicles that also contain 
an internal combustion engine must be consigned under the entry 
``Engine, internal combustion, flammable gas powered'' or ``Engine, 
internal combustion, flammable liquid powered'' or ``Vehicle, flammable 
gas powered'' or ``Vehicle, flammable liquid powered,'' as appropriate. 
These entries include hybrid electric vehicles powered by both an 
internal combustion engine and batteries. Additionally, self-propelled 
vehicles or equipment that contain a fuel cell engine must be consigned 
under the entries ``Engine, fuel cell, flammable gas powered'' or 
``Engine, fuel cell, flammable liquid powered'' or ``Vehicle, fuel 
cell, flammable gas powered'' or ``Vehicle, fuel cell, flammable liquid 
powered,'' as appropriate. These entries include hybrid electric 
vehicles powered by a fuel cell engine, an internal combustion engine, 
and batteries.
* * * * *
    155 Fish meal, fish scrap and krill meal may not be transported if 
the temperature at the time of loading either exceeds 35 [deg]C (95 
[deg]F), or exceeds 5 [deg]C (41 [deg]F) above the ambient temperature, 
whichever is higher.
* * * * *
    222 Shipments offered for transportation by aircraft may not be 
reclassed as ORM-D.
    237 ``Batteries, dry, containing potassium hydroxide solid, 
electric storage'' must be prepared and packaged in accordance with the 
requirements of Sec.  173.159(a) and (c). For transportation by 
aircraft, the provisions of Sec.  173.159(b)(2) apply. This entry may 
only be used for the transport of non-activated batteries that contain 
dry potassium hydroxide and that are intended to be activated prior to 
use by the addition of an appropriate amount of water to the individual 
cells.
    238 Neutron radiation detectors:
    a. Neutron radiation detectors containing non-pressurized boron 
trifluoride gas in excess of 1 gram and radiation detection systems 
containing such neutron radiation detectors as components may be 
transported by highway, rail, vessel, or cargo aircraft in accordance 
with the following:
    (1) The pressure in each neutron radiation detector must not exceed 
105 kPa absolute at 20 [deg]C;
    (2) The amount of gas must not exceed 12.8 grams per detector and 
the amount per outer packaging or per radiation detection system must 
not exceed 51.2 grams;
    (3) Each neutron radiation detector must be of welded metal 
construction with brazed metal to ceramic feed through assemblies. They 
must have a minimum burst pressure of 1800 kPa; and
    (4) Each neutron radiation detector must be packed in a sealed 
intermediate plastic liner with sufficient absorbent material to absorb 
the entire gas contents. Neutron radiation detectors must be packed in 
strong outer packagings that are capable of withstanding a 1.8 meter 
(6-foot) drop without leakage. Radiation detection systems containing 
neutron radiation detectors must also include absorbent material 
sufficient to absorb the entire gas contents of the neutron radiation 
detectors. Absorbent material must be surrounded by a liner or liners, 
as appropriate. They must be packed in strong outer packagings unless 
neutron radiation detectors are afforded equivalent protection by the 
radiation detection system.
    b. Except for transportation by aircraft, neutron radiation 
detectors and

[[Page 1071]]

radiation detection systems containing such detectors transported in 
accordance with paragraph (a) of this special provision are not subject 
to the labeling and placarding requirements of part 172 of this 
subchapter.
    c. When transported by highway, rail, vessel, or as cargo on an 
aircraft, neutron radiation detectors containing not more than 1 gram 
of boron trifluoride, including those with solder glass joints, and 
radiation detection systems containing such detectors, where the 
neutron radiation detectors meet and are packed in accordance with the 
requirements of paragraph (a) of this special provision, are not 
subject to any other requirements of this subchapter.
* * * * *
    328 When lithium cells or batteries are contained in the fuel cell 
system, the item must be described under this entry and the entry 
``Lithium batteries, contained in equipment''.
* * * * *
    360 Vehicles only powered by lithium batteries must be assigned the 
identification number UN3171.
    361 Capacitors with an energy storage capacity of 0.3 Wh or less 
are not subject to the requirements of this subchapter. Energy storage 
capacity means the energy held by a capacitor, as calculated using the 
nominal voltage and capacitance. This entry does not apply to 
capacitors that by design maintain a terminal voltage (e.g., 
asymmetrical capacitors.)
    362 This entry applies to liquids, pastes or powders, pressurized 
with a propellant that meets the definition of a gas in Sec.  173.115. 
A chemical under pressure packaged in an aerosol dispenser must be 
transported under UN1950. The chemical under pressure must be classed 
based on the hazard characteristics of the components in the 
propellant; the liquid; or the solid. The following provisions also 
apply:
    (a) If one of the components, which can be a pure substance or a 
mixture, is classed as flammable, the chemical under pressure must be 
classed as flammable in Division 2.1. Flammable components are 
flammable liquids and liquid mixtures, flammable solids and solid 
mixtures or flammable gases and gas mixtures meeting the following 
criteria:
    (i) A flammable liquid is a liquid having a flashpoint of not more 
than 93 [deg]C (200 [deg]F);
    (ii) A flammable solid is a solid that meets the criteria in Sec.  
173.124 of this subchapter; or
    (iii) A flammable gas is a gas that meets the criteria in Sec.  
173.115 of this subchapter.
    (b) Gases of Division 2.3 and gases with a subsidiary risk of 5.1 
must not be used as a propellant in a chemical under pressure.
    (c) Where the liquid or solid components are classed as Division 
6.1, packing groups II or III, or Class 8, packing groups II or III, 
the chemical under pressure must be assigned a subsidiary risk of 
Division 6.1 or Class 8 and the appropriate identification number must 
be assigned. Components classed as Division 6.1, packing group I, or 
Class 8, packing group I, must not be offered for transportation and 
transported under this description.
    (d) A chemical under pressure with components meeting the 
properties of : Class 1 (explosives); Class 3 (liquid desensitized 
explosives); Division 4.1 (self-reactive substances and solid 
desensitized explosives); Division 4.2 (substances liable to 
spontaneous combustion); Division 4.3 (substances which, in contact 
with water, emit flammable gases or toxic gases); Division 5.1 
(oxidizing substances); Division 5.2 (organic peroxides); Division 6.2 
(Infectious substances); or, Class 7 (Radioactive material), must not 
be offered for transportation under this description.
    (e) A description to which Special provision 170 or TP7 is assigned 
in Column 7 of the Sec.  172.101 Hazardous Materials Table, and 
therefore requires air to be eliminated from the package vapor space by 
nitrogen or other means, must not be offered for transportation under 
this description.
    365 For manufactured instruments and articles containing mercury, 
see UN3506.
    (2) * * *
* * * * *
    A51 Irrespective of the quantity limitations specified in Column 
(9A) of the Sec.  172.101 Table or Sec.  175.75(c), the following 
aircraft batteries may be transported on passenger aircraft as cargo:
    a. Wet cell batteries, UN 2794 or UN 2795, up to a limit of 100kg 
net mass per package;
    b. Lithium ion batteries, UN 3090, packages containing a single 
aircraft battery with a net mass not exceeding 35kg; and
    c. Transport in accordance with this special provision must be 
noted on the dangerous goods transport document.
* * * * *
    A60 Sterilization devices, when containing less than 30 mL per 
inner packaging with not more than 150 mL per outer packaging, may be 
transported in accordance with the provisions in Sec.  173.4a, 
irrespective of Sec.  173.4a(b), provided such packagings were first 
subjected to comparative fire testing. Comparative fire testing between 
a package as prepared for transport (including the substance to be 
transported) and an identical package filled with water must show that 
the maximum temperature measured inside the packages during testing 
does not differ by more than 200 [deg]C (392 [deg]F). Packagings may 
include a vent to permit the slow escape of gas (i.e. not more than 0.1 
mL/hour per 30 mL inner packaging at 20 [deg]C (68 [deg]F) produced 
from gradual decomposition.
* * * * *
    A100 Primary (non-rechargeable) lithium batteries and cells are 
forbidden for transport aboard passenger-carrying aircraft. Secondary 
(rechargeable) lithium batteries and cells are authorized aboard 
passenger-carrying aircraft provided the net weight of lithium 
batteries does not exceed 5 kg (11 pounds) per package.
* * * * *
    A103 Equipment is authorized aboard passenger-carrying aircraft 
provided the net weight of lithium batteries does not exceed 5 kg (11 
pounds) per package.
* * * * *
    A189 Except where the defining criteria of another class or 
division are met, concentrations of formaldehyde solution:
    a. With less than 25 percent but not less than 10 percent 
formaldehyde, must be described as UN3334, Aviation regulated liquid, 
n.o.s.; and
    b. With less than 10 percent formaldehyde, are not subject to this 
subchapter.
* * * * *
    A191 Notwithstanding the Division 6.1 subsidiary risk for this 
description, the toxic subsidiary risk label and the requirement to 
indicate the subsidiary risk on the shipping paper are not required for 
manufactured articles containing less than 5 kg (11 pounds) of mercury.
* * * * *
    A200 These articles must be transported as cargo and may not be 
carried aboard an aircraft by passengers or crewmembers in carry-on 
baggage, checked baggage, or on their person unless specifically 
authorized in Sec.  175.10.
* * * * *
    (3) * * *
* * * * *
    B120 The use of flexible bulk containers conforming to the 
requirements in subpart R and subpart

[[Page 1072]]

S of part 178 of this subchapter is permitted.
* * * * *
    (4) * * *

                      Table 1--IB Codes (IBC Codes)
------------------------------------------------------------------------
             IBC code                          Authorized IBCs
------------------------------------------------------------------------
IB1...............................  Authorized IBCs: Metal (31A, 31B and
                                     31N).
                                    Additional Requirement: Only liquids
                                     with a vapor pressure less than or
                                     equal to 110 kPa at 50 [deg]C (1.1
                                     bar at 122 [deg]F), or 130 kPa at
                                     55 [deg]C (1.3 bar at 131 [deg]F)
                                     are authorized.
IB2...............................  Authorized IBCs: Metal (31A, 31B and
                                     31N); Rigid plastics (31H1 and
                                     31H2); Composite (31HZ1).
                                    Additional Requirement: Only liquids
                                     with a vapor pressure less than or
                                     equal to 110 kPa at 50 [deg]C (1.1
                                     bar at 122 [deg]F), or 130 kPa at
                                     55 [deg]C (1.3 bar at 131 [deg]F)
                                     are authorized.
IB3...............................  Authorized IBCs: Metal (31A, 31B and
                                     31N); Rigid plastics (31H1 and
                                     31H2); Composite (31HZ1 and 31HA2,
                                     31HB2, 31HN2, 31HD2 and 31HH2).
                                    Additional Requirement: Only liquids
                                     with a vapor pressure less than or
                                     equal to 110 kPa at 50 [deg]C (1.1
                                     bar at 122 [deg]F), or 130 kPa at
                                     55 [deg]C (1.3 bar at 131 [deg]F)
                                     are authorized, except for UN2672
                                     (also see Special provision IP8 in
                                     Table 2 for UN2672).
IB4...............................  Authorized IBCs: Metal (11A, 11B,
                                     11N, 21A, 21B and 21N).
IB5...............................  Authorized IBCs: Metal (11A, 11B,
                                     11N, 21A, 21B and 21N); Rigid
                                     plastics (11H1, 11H2, 21H1, and
                                     21H2); Composite (11HZ1and 21HZ1).
IB6...............................  Authorized IBCs: Metal (11A, 11B,
                                     11N, 21A, 21B and 21N); Rigid
                                     plastics (11H1, 11H2, 21H1, and
                                     21H2); Composite (11HZ1, 11HZ2,
                                     21HZ1, and 21HZ2).
                                    Additional Requirement: Composite
                                     IBCs 11HZ2 and 21HZ2 may not be
                                     used when the hazardous materials
                                     being transported may become liquid
                                     during transport.
IB7...............................  Authorized IBCs: Metal (11A, 11B,
                                     11N, 21A, 21B and 21N); Rigid
                                     plastics (11H1, 11H2, 21H1, and
                                     21H2); Composite (11HZ1, 11HZ2,
                                     21HZ1, and 21HZ2); Wooden (11C, 11D
                                     and 11F).
                                    Additional Requirement: Liners of
                                     wooden IBCs must be sift-proof.
IB8...............................  Authorized IBCs: Metal (11A, 11B,
                                     11N, 21A, 21B and 21N); Rigid
                                     plastics (11H1, 11H2, 21H1, and
                                     21H2); Composite (11HZ1, 11HZ2,
                                     21HZ1, and 21HZ2); Fiberboard
                                     (11G); Wooden (11C, 11D and 11F);
                                     Flexible (13H1, 13H2, 13H3, 13H4,
                                     13H5, 13L1, 13L2, 13L3, 13L4, 13M1
                                     or 13M2).
IB9...............................  IBCs are only authorized if approved
                                     by the Associate Administrator.
------------------------------------------------------------------------

* * * * *
    (7) * * *
* * * * *
    (iii) T50 When portable tank instruction T50 is indicated in Column 
(7) of the Sec.  172.101 Hazardous Materials Table, the applicable 
liquefied compressed gas and chemical under pressure descriptions are 
authorized to be transported in portable tanks in accordance with the 
requirements of Sec.  173.313 of this subchapter.
* * * * *
    (8) * * *
    (ii) * * *
* * * * *
    TP39 The portable tank instruction T4 prescribed may continue to be 
applied until December 31, 2018.
    TP40 The portable tank must not be transported when connected with 
spray application equipment.
    TP41 The portable tank instruction T9 may continue to be applied 
until December 31, 2018.
* * * * *
    (9) * * *
* * * * *
    W10 When offered for transportation by vessel, the use of Large 
Packagings (see Sec.  171.8 of this subchapter) is prohibited.
* * * * *

0
7. In Sec.  172.202, paragraph (a)(6)(vii) is added:


Sec.  172.202  Description of hazardous material on shipping papers.

    (a) * * *
    (6) * * *
    (vii) For hazardous materials in limited quantities with a 30 kg 
gross mass limit in Column (9A) or (9B) of the Sec.  172.101 Hazardous 
Materials Table, where different hazardous materials are packed 
together in the same outer packaging, the net quantity of each 
hazardous material followed by the gross mass of the completed package 
is indicated and:
* * * * *

0
8. In Sec.  172.203, paragraph (i)(3) is revised to read as follows:


Sec.  172.203  Additional description requirements.

* * * * *
    (i) * * *
    (3) For a hazardous material consigned under an ``n.o.s.'' entry 
not included in the segregation groups listed in section 3.1.4 of the 
IMDG Code (IBR see Sec.  171.7 of this subchapter) but belonging, in 
the opinion of the consignor, to one of these groups, the appropriate 
segregation group must be shown in association with the basic 
description (for example, IMDG Code segregation group--1 Acids). When 
no segregation group is applicable, there is no requirement to indicate 
that condition.
* * * * *

0
9. In Sec.  172.301, paragraph (a)(1) is revised to read as follows:


Sec.  172.301  General marking requirements for non-bulk packagings.

    (a) Proper shipping name and identification number. (1) Except as 
otherwise provided by this subchapter, each person who offers a 
hazardous material for transportation in a non-bulk packaging must mark 
the package with the proper shipping name and identification number 
(preceded by ``UN'', ``NA'' or ``ID,'' as appropriate) for the material 
as shown in the Sec.  172.101 Hazardous Materials Table. The 
identification number marking preceded by ``UN'', ``NA'', or ``ID'' as 
appropriate must be marked in characters at least 12 mm (0.47 inches) 
high. Packages with a maximum capacity of 30 liters (8 gallons) or 
less, 30 kg (66 pounds) maximum net mass, or cylinders with a water 
capacity of 60 liters (16 gallons) or less must be marked with 
characters at least 6 mm (0.24 inches) high. Packages with a maximum 
capacity of 5 liters (1.32 gallons) or 5 kg (11 pounds) or less must be 
marked in a size appropriate for the size of the package.
    (i) Transitional exception. For domestic transportation, until 
January 1, 2017, the identification number

[[Page 1073]]

markings are not subject to the minimum size requirements specified in 
paragraph this (a)(1).
    (ii) Exception for permanently marked packagings. For domestic 
transportation, a packaging manufactured prior to January 1, 2017 and 
permanently marked (e.g., by embossing or through a heat stamp process) 
with the appropriate identification number marking may continue in 
service until the end of its useful life regardless of whether the 
identification number markings meet the minimum size requirements 
specified in this paragraph (a)(1).
* * * * *

0
11. In Sec.  172.312, paragraph (c)(3) is revised to read as follows:


Sec.  172.312  Liquid hazardous materials in non-bulk packagings.

* * * * *
    (c) * * *
    (3) When offered or intended for transportation by aircraft, 
packages containing liquid hazardous materials in inner packagings of 
120 mL (4 fluid oz.) or less when packed with sufficient absorption 
material between the inner and outer packagings to completely absorb 
the liquid contents.
* * * * *

0
12. In Sec.  172.407, paragraph (f) is revised to read as follows;


Sec.  172.407  Label specifications.

* * * * *
    (f) Exceptions. Except for materials poisonous by inhalation (See 
Sec.  171.8 of this subchapter), a label conforming to specifications 
in the UN Recommendations (IBR, see Sec.  171.7 of this subchapter) may 
be used in place of a corresponding label that conforms to the 
requirements of this subpart.
* * * * *

0
13. In Sec.  172.604, paragraph (d)(2) is revised to read as follows.


Sec.  172.604  Emergency response telephone number.

* * * * *
    (d) * * *
    (2) Materials properly described under the following shipping 
names:

Battery powered equipment.
Battery powered vehicle.
Carbon dioxide, solid.
Castor bean.
Castor flake.
Castor meal.
Castor pomace.
Consumer commodity.
Dry ice.
Engines, internal combustion.
Fish meal, stabilized.
Fish scrap, stabilized.
Krill Meal, PG III.
Refrigerating machine.
Vehicle, flammable gas powered.
Vehicle, flammable liquid powered.
Wheelchair, electric.
* * * * *

PART 173--SHIPPERS--GENERAL REQUIREMENTS FOR SHIPMENTS AND 
PACKAGINGS

0
14. The authority citation for part 173 continues to read as follows:

    Authority:  49 U.S.C. 5101-5128, 44701; 49 CFR 1.45, 1.53.

0
15. In Sec.  173.4b, paragraph (b)(8) is revised to read as follows:


Sec.  173.4b  De minimus exceptions.

* * * * *
    (b) * * *
    (8) Restrictions. Except as provided in Sec.  175.10, for 
transportation by aircraft, hazardous material packaged in accordance 
with this section may not be carried in checked or carry-on baggage by 
a passenger or crew member.

0
16. In Sec.  173.12, paragraph (b)(2)(ii)(A) is revised to read as 
follows:


Sec.  173.12  Exceptions for shipments of waste materials.

* * * * *
    (b) * * *
    (2) * * *
    (ii) * * *
    (A) A UN 1A2, UN 1B2 or UN 1N2 metal drum, a UN 1D plywood drum, a 
UN 1G fiber drum, or a UN 1H2 plastic drum, tested and marked to at 
least the Packing Group III performance level for liquids or solids;
* * * * *

0
17. In Sec.  173.21, paragraph (f)(3)(ii) is revised to read as 
follows:


Sec.  173.21  Forbidden materials and packages.

* * * * *
    (f) * * *
    (3) * * *
    (ii) For transportation by vessel, shipments are authorized in 
accordance with the control temperature requirements in 7.3.7 of the 
IMDG Code (IBR, see Sec.  171.7 of this subchapter).
* * * * *

0
18. Section Sec.  173.37 is added to read as follows:


Sec.  173.37  Hazardous Materials in Flexible Bulk Containers.

    (a) No person may offer or accept a hazardous material for 
transportation in a Flexible Bulk Container except as authorized by 
this subchapter. Each Flexible Bulk Container used for the 
transportation of hazardous materials must conform to the requirements 
of its specification and regulations for the transportation of the 
particular commodity.
    (b) Initial use and reuse of Flexible Bulk Containers. A Flexible 
Bulk Container may be reused. Before a Flexible Bulk Container is 
filled and offered for transportation, the Flexible Bulk Container must 
be given an external visual inspection by the person filling the 
Flexible Bulk Container to ensure:
    (1) The Flexible Bulk Container is free from corrosion, 
contamination, cracks, cuts, or other damage that would render it 
unable to pass the prescribed design type test to which it is certified 
and marked; and
    (2) The Flexible Bulk Container is marked in accordance with 
requirements in Sec.  178.1010 of this subchapter. Required markings 
that are missing, damaged or difficult to read must be restored or 
returned to original condition.
    (3) The following components must be examined to determine 
structural serviceability:
    (i) Textile slings;
    (ii) Load-bearing structure straps;
    (iii) Body fabric; and
    (iv) Lock device parts including metal and textile parts are free 
from protrusions or damage.
    (4) The use of Flexible Bulk Containers for the transport of 
hazardous materials is permitted for a period not to exceed two years 
from the date of manufacture of the Flexible Bulk Container.
    (c) During transportation--
    (1) No hazardous material may remain on the outside of the Flexible 
Bulk Container; and
    (2) Each Flexible Bulk Container must be securely fastened to or 
contained within the transport unit.
    (3) If restraints such as banding or straps are used, these straps 
must not be over-tightened to an extent that causes damage or 
deformation to the Flexible Bulk Container.
    (4) Flexible Bulk Containers must be transported in a conveyance 
with rigid sides and ends that extend at least two-thirds of the height 
of the Flexible Bulk Container.
    (5) Flexible Bulk Containers must not be stacked for highway or 
rail transportation.
    (6) Flexible Bulk Containers must not be transported in cargo 
transport units when offered for transportation by vessel.
    (7) Flexible Bulk Containers when transported by barge must be 
stowed in such a way that there are no void spaces between the Flexible 
Bulk Containers in the barge. If the Flexible Bulk

[[Page 1074]]

Containers do not completely fill the barge, adequate measures must be 
taken to avoid shifting of cargo. The maximum permissible height of the 
stack of Flexible Bulk Containers must not exceed 3 containers high.
    (d) A Flexible Bulk Container used to transport hazardous materials 
may not exceed 15 cubic meters (530 cubic feet) capacity.

0
19. In Sec.  173.50, paragraph (b)(6) is revised as follows.


Sec.  173.50  Class 1--Definitions.

* * * * *
    (b) * * *
    (6) Division 1.6 \2\ consists of extremely insensitive articles 
that do not have a mass explosion hazard. This division is comprised of 
articles that contain only extremely insensitive substances and that 
demonstrate a negligible probability of accidental initiation or 
propagation.

    \2\ The risk from articles of Division 1.6 is limited to the 
explosion of a single article.


0
20. In Sec.  173.52, in paragraph (b), in Table 1, the entry in the 
twelfth row is revised to read as follows:


Sec.  173.52  Classification codes and compatibility groups of 
explosives.

* * * * *
    (b) * * *

                      Table 1--Classification Codes
------------------------------------------------------------------------
 Description of substances or article    Compatibility    Classification
           to be classified                  group             code
------------------------------------------------------------------------
 
                              * * * * * * *
Articles containing only extremely                    N             1.6N
 insensitive substances...............
 
                              * * * * * * *
------------------------------------------------------------------------

* * * * *

0
21. In Sec.  173.56 paragraph (h)(2) is revised to read as follows:
* * * * *
    (h) * * *
    (2) Ammunition for rifle, pistol, shotgun, or tools;
* * * * *

0
22. In Sec.  173.59:
0
a. The word ``detonating'' is removed from the definition of Articles, 
explosive, extremely insensitive (Articles, EEI).
0
b. The definition of Auxiliary explosive component, isolated is added.
0
c. The definition of ``Cartridges, blank'' is revised.
0
d. The definition of ``Explosive, extremely insensitive detonating 
substance (EIDS)'' is removed.
0
e. The definition of ``Explosive, extremely insensitive substance 
(EIS)'' is added.
    The revision and additions are as follows:


Sec.  173.59  Description for explosive terms.

* * * * *
    Auxiliary explosive component, isolated. A small device that 
explosively performs an operation related to the article's functioning, 
other than its main explosive loads' performance. Functioning of the 
component does not cause any reaction of the main explosive loads 
contained within the article.
* * * * *
    Cartridges, blank. Articles that consist of a cartridge case with a 
center or rim fire primer and a confined charge of smokeless or black 
powder, but no projectile. Used in training, saluting, or in starter 
pistols, tools, etc.
* * * * *
    Explosive, extremely insensitive substance (EIS). A substance that 
has demonstrated through tests that it is so insensitive that there is 
very little probability of accidental initiation.
* * * * *

0
23. In Sec.  173.62, in paragraph (c), in the Table of Packing Methods, 
Packing Instructions 110(a), 111, 112(a), 112(b), 112(c), 113, 114(a), 
114(b), 115, 116, 117, 130, 131, 132(a), 132(b), 133, 134, 135, 136, 
137, 138, 139, 140, 141, 142, 143 and 144 are revised to read as 
follows:


Sec.  173.62  Specific packaging requirements for explosives.

* * * * *
    (c) * * *

                                            Table of Packing Methods
----------------------------------------------------------------------------------------------------------------
         Packing instruction               Inner packagings     Intermediate packagings      Outer packagings
----------------------------------------------------------------------------------------------------------------
 
                                                  * * * * * * *
110(a)...............................  Bags...................  Bags...................  Drums.
PARTICULAR PACKING REQUIREMENTS OR     plastics,                plastics,                   steel (1A1 or 1A2).
 EXCEPTIONS:                           textile, plastic coated  textile, plastic coated  other metal (1N1 or
1. The Intermediate packagings must     or lined.                or lined.                1N2).
 be filled with water saturated        rubber.................  rubber.................  plastics-(1H1 or 1H2).
 material such as an anti-freeze       textile, rubberized....  textile, rubberized-...
 solution or wetted cushioning         textile................  Receptacles............
2. Outer packagings must be filled     Receptacles............  plastics...............
 with water saturated material such    wood...................  metal..................
 as an anti-freeze solution or wetted                           wood...................
 cushioning. Outer packagings must be
 constructed and sealed to prevent
 evaporation of the wetting solution,
 except when 0224 is being carried
 dry
 
                                                  * * * * * * *
111..................................  Bags...................  Not necessary..........  Boxes.

[[Page 1075]]

 
PARTICULAR PACKING REQUIREMENTS OR     paper, waterproofed                                  steel (4A).
 EXCEPTIONS:                           plastics...............                           aluminum (4B).
For UN0159, inner packagings are not   textile, rubberized....                           other metal (4N).
 required when metal (1A1, 1A2, 1B1,   Sheets.................                           natural wood, ordinary
 1B2, 1N1 or 1N2) or plastics (1H1 or  plastics...............                            (4C1).
 1H2) drums are used as outer          textile, rubberized....                           natural wood, sift
 packagings                            Receptacles............                            proof (4C2).
                                       wood...................                           plywood (4D).
                                                                                         reconstituted wood
                                                                                          (4F).
                                                                                         fiberboard (4G).
                                                                                         plastics, expanded
                                                                                          (4H1).
                                                                                         plastics, solid (4H2).
                                                                                         Drums
                                                                                         steel (1A1 or 1A2).
                                                                                         aluminum (1B1 or 1B2).
                                                                                         other metal (1N1 or
                                                                                          1N2).
                                                                                         plywood (1D).
                                                                                         fiberboard (1G).
                                                                                         plastics (1H1 or 1H2).
112(a)...............................  Bags...................  Bags...................  Boxes.
PARTICULAR PACKING REQUIREMENTS OR     paper, multiwall, water  plastics                    steel (4A).
 EXCEPTIONS:                            resistant               textile, plastic coated  aluminum (4B).
1. For UN Nos. 0004, 0076, 0078,       plastics...............   or lined.               other metal (4N).
 0154, 0219 and 0394, packagings must  textile................  Receptacles............  natural wood, ordinary
 be lead free                          textile, rubberized....  metal..................   (4C1).
2. Intermediate packagings are not     woven plastics.........  plastics...............  natural wood, sift
 required if leakproof drums are used  Receptacles............  wood...................   proof (4C2).
 as the outer packaging                metal..................                           plywood (4D).
3. For UN0072 and UN0226,              plastics...............                           reconstituted wood
 intermediate packagings are not       wood...................                            (4F).
 required                                                                                fiberboard (4G).
                                                                                         plastics, expanded
                                                                                          (4H1).
                                                                                         plastics, solid (4H2).
                                                                                         Drums
                                                                                         steel (1A1 or 1A2).
                                                                                         aluminum (1B1 or 1B2).
                                                                                         other metal (1N1 or
                                                                                          1N2).
                                                                                         plywood (1D).
                                                                                         fiber (1G).
                                                                                         plastics (1H1 or 1H2).
112(b)...............................  Bags...................  Bags...................  Boxes.

[[Page 1076]]

 
This packing instruction applies to    paper, Kraft             (for UN0150 only)           woven plastics sift-
 dry solids other than powders         paper, multiwall, water  plastics...............      proof (5H2/3).
PARTICULAR PACKING REQUIREMENTS OR      resistant.              textile, plastic coated  plastics, film (5H4).
 EXCEPTIONS:                           plastics...............   or lined.               textile, sift-proof
1. For UN 0004, 0076, 0078, 0154,      textile................                            (5L2).
 0216, 0219 and 0386, packagings must  textile, rubberized                               textile, water
 be lead free                           plastics.                                         resistant (5L3).
2. For UN0209, bags, sift-proof (5H2)  woven plastics.........                           paper, multiwall, water
 are recommended for flake or prilled                                                     resistant (5M2).
 TNT in the dry state and a maximum                                                      Boxes
 net mass of 30 kg.                                                                      steel (4A).
3. For UN0222, inner packagings are                                                      aluminum (4B).
 not required                                                                            other metal (4N).
                                                                                         natural wood, ordinary
                                                                                          (4C1).
                                                                                         natural wood, sift
                                                                                          proof (4C2).
                                                                                         plywood (4D)
                                                                                         reconstituted wood
                                                                                          (4F).
                                                                                         fiberboard (4G).
                                                                                         plastics, expanded
                                                                                          (4H1).
                                                                                         plastics, solid (4H2).
                                                                                         Drums
                                                                                         steel (1A1 or 1A2).
                                                                                         aluminum (1B1 or 1B2).
                                                                                         plywood (1D).
                                                                                         other metal (1N1 or
                                                                                          1N2).
                                                                                         fiber (1G).
                                                                                         plastics (1H1 or 1H2).
112(c) This packing instruction        Bags...................  Bags...................  Boxes.
 applies to solid dry powders.
PARTICULAR PACKING REQUIREMENTS OR     paper, multiwall, water  paper, multiwall, water     steel (4A).
 EXCEPTIONS:                            resistant                resistant with inner    aluminum (4B).
1. For UN 0004, 0076, 0078, 0154,      plastics...............   lining                  other metal (4N).
 0216, 0219 and 0386, packagings must  woven plastics.........  plastics...............  natural wood,
 be lead free                          Receptacles............  Receptacles............  ordinary (4C1).
2. For UN0209, bags, sift-proof (5H2)  fiberboard.............  metal..................  natural wood,
 are recommended for flake or prilled  metal..................  plastics...............  sift proof (4C2).
 TNT in the dry state. Bags must not   plastics...............  wood...................  plywood (4D).
 exceed a maximum net mass of 30 kg.   wood...................                           reconstituted wood
3. Inner packagings are not required                                                      (4F).
 if drums are used as the outer                                                          fiberboard (4G).
 packaging.                                                                              plastics, solid (4H2).
4. At least one of the packagings                                                        Drums.
 must be sift-proof                                                                      plastics (1H1 or 1H2).
                                                                                         steel (1A1 or 1A2).
                                                                                         aluminum (1B1 or 1B2).
                                                                                         other metal (1N1 or
                                                                                          1N2).
                                                                                         plywood (1D).
                                                                                         fiber (1G).
113..................................  Bags...................  Not necessary..........  Boxes.

[[Page 1077]]

 
PARTICULAR PACKING REQUIREMENTS OR     paper                                                steel (4A).
 EXCEPTIONS:                           plastics...............                           aluminum (4B).
1. For UN0094 and UN0305, no more      textile, rubberized....                           other metal (4N).
 than 50 g of substance must be        Receptacles............                           natural wood, ordinary
 packed in an inner packaging          fiberboard.............                            (4C1).
2. For UN0027, inner packagings are    metal..................                           natural wood, sift-
 not necessary when drums are used as  plastics...............                            proof walls (4C2).
 the outer packaging                   wood...................                           plywood (4D).
3. At least one of the packagings      Sheets.................                           reconstituted wood
 must be sift-proof                    paper, kraft...........                            (4F).
4. Sheets must only be used for        paper, waxed...........                           fiberboard (4G).
 UN0028                                                                                  plastics, solid (4H2).
                                                                                         Drums
                                                                                         plastics (1H1 or 1H2).
                                                                                         steel (1A1 or 1A2).
                                                                                         aluminum-(1B1 or 1B2).
                                                                                         other metal (1N1 or
                                                                                          1N2).
                                                                                         plywood (1D).
                                                                                         fiber (1G).
114(a)...............................  Bags...................  Bags...................  Boxes
This packing instruction applies to    plastics                 plastics                    steel (4A).
 wetted solids                         textile................  textile, plastic coated  other metal (4N).
PARTICULAR PACKING REQUIREMENTS OR     woven plastics.........   or lined.               natural wood, ordinary
 EXCEPTIONS:                           Receptacles............  Receptacles............   (4C1).
1. For UN 0077, 0234, 0235 and 0236,   metal..................  metal..................  natural wood, sift
 packagings must be lead free          plastics...............  plastics...............   proof walls (4C2).
2. For UN0342, inner packagings are    wood...................  Dividing partitions....  plywood (4D).
 not required when metal (1A1, 1A2,                             wood...................  reconstituted wood
 1B1, 1B2, 1N1 or 1N2) or plastics                                                        (4F).
 (1H1 or 1H2) drums are used as outer                                                    fiberboard (4G).
 packagings                                                                              plastics, solid (4H2).
3. Intermediate packagings are not                                                       Drums.
 required if leakproof removable head                                                    steel (1A1 or 1A2).
 drums are used as the outer                                                             aluminum (1B1 or 1B2).
 packaging                                                                               other metal (1N1 or
                                                                                          1N2)
                                                                                         plywood (1D).
                                                                                         fiber (1G).
                                                                                         plastics (1H1 or 1H2).
114(b)...............................  Bags...................  Not necessary..........  Boxes
PARTICULAR PACKING REQUIREMENTS OR     paper, kraft                                         natural wood,
 EXCEPTIONS:                           plastics...............                               ordinary (4C1).
1. For UN Nos. 0077, 0132, 0234, 0235  textile, sift-proof....                           natural wood, sift-
 and 0236, packagings must be lead     woven plastics, sift-                              proof walls (4C2).
 free                                   proof..                                          plywood (4D).
2. For UN0160 and UN0161, when metal   Receptacles............                           reconstituted wood
 drums (1A2, 1B2 or 1N2) are used as   fiberboard.............                            (4F).
 the outer packaging, metal            metal..................                           fiberboard (4G).
 packagings must be so constructed     paper..................                           Drums.
 that the risk of explosion, by        plastics...............                           steel (1A1 or 1A2).
 reason of increased internal          wood...................                           aluminum (1B1 or 1B2).
 pressure from internal or external    woven plastics, sift-                             other metal (1N1 or
 causes, is prevented                   proof..                                           1N2).
3. For UN0160, UN0161, and UN0508,                                                       plywood (1D).
 inner packagings are not necessary                                                      fiber (1G).
 if drums are used as the outer                                                          plastics (1H1 or 1H2).
 packaging
4. For UN0508 and UN0509, metal
 packagings must not be used
115..................................  Receptacles............  Bags...................  Boxes

[[Page 1078]]

 
PARTICULAR PACKING REQUIREMENTS OR     metal                    plastics in metal           natural wood,
 EXCEPTIONS:                           plastics...............   receptacles                 ordinary (4C1).
1. For liquid explosives, inner        wood...................  Drums..................  natural wood, sift
 packagings must be surrounded with                             metal..................   proof walls (4C2).
 non-combustible absorbent cushioning                           Receptacles............  plywood (4D).
 material in sufficient quantity to                             wood...................  reconstituted wood
 absorb the entire liquid content.                                                        (4F).
 Metal receptacles should be                                                             fiberboard (4G).
 cushioned from each other. The net                                                      Drums.
 mass of explosive per package may                                                       plastics (1H1 or 1H2).
 not exceed 30 kg when boxes are used                                                    steel (1A1 or 1A2).
 as outer packaging. The net volume                                                      aluminum (1B1 or 1B2).
 of explosive in each package other                                                      other metal (1N1 or
 than boxes must not exceed 120                                                           1N2).
 liters                                                                                  plywood (1D).
2. For UN 0075, 0143, 0495 and 0497                                                      fiber (1G).
 when boxes are used as the outer                                                        Specification MC-200
 packaging, inner packagings must                                                         containers may be used
 have taped screw cap closures and be                                                     for transport by motor
 not more than 5 liters capacity                                                          vehicle.
 each. A composite packaging
 consisting of a plastic receptacle
 in a metal drum (6HA1) may be used
 in lieu of combination packagings.
 Liquid substances must not freeze at
 temperatures above -15 [deg]C (+5
 [deg]F)
3. For UN0144, intermediate
 packagings are not necessary.
 Aluminum drums (1B1 and 1B2) and
 metal, other than steel or aluminum,
 drums (1N1 and 1N2) must not be
 used.
116..................................  Bags...................  Not Necessary..........  Bags
PARTICULAR PACKING REQUIREMENTS OR     Bags                     Not necessary..........     Bags.
 EXCEPTIONS:                           paper, water and oil...                           woven plastics (5H1/2/
1. For UN 0082, 0241, 0331 and 0332,   resistant..............                            3).
 inner packagings are not necessary    plastics...............                           paper, multiwall, water
 if leakproof removable head drums     textile, plastic coated                            resistant (5M2).
 are used as the outer packaging        or.                                              plastics, film (5H4).
2. For UN 0082, 0241, 0331 and 0332,   lined..................                           textile, sift-proof
 inner packagings are not required     woven plastics, sift-                              (5L2).
 when the explosive is contained in a   proof.                                           textile, water
 material impervious to liquid         Receptacles............                            resistant (5L3).
3. For UN0081, inner packagings are    fiberboard, water                                 Boxes.
 not required when contained in rigid   resistant.                                       steel (4A).
 plastic that is impervious to nitric  metal..................                           aluminum (4B).
 esters                                plastics...............                           other metal (4N).
4. For UN0331, inner packagings are    wood, sift-proof.......                           wood, natural, ordinary
 not required when bags (5H2), (5H3)   Sheets.................                            (4C1).
 or (5H4) are used as outer            paper, water resistant.                           natural wood, sift
 packagings                            paper, waxed...........                            proof walls (4C2).
5. Bags (5H2 or 5H3) must be used      plastics...............                           plywood (4D).
 only for UN0082, 0241, 0331 and 0332                                                    reconstituted wood
6. For UN0081, bags must not be used                                                      (4F).
 as outer packagings                                                                     fiberboard (4G).
                                                                                         plastics, solid (4H2).
                                                                                         Drums.
                                                                                         steel (1A1 or 1A2).
                                                                                         aluminum (1B1 or 1B2).
                                                                                         other metal (1N1 or
                                                                                          1N2).
                                                                                         plywood (1D).
                                                                                         fiber (1G).
                                                                                         plastics (1H1 or 1H2).
                                                                                         Jerricans.
                                                                                         steel (3A1 or 3A2).
                                                                                         plastics (3H1 or 3H2).
117..................................  Not necessary..........  Not necessary..........  IBCs.

[[Page 1079]]

 
PARTICULAR PACKING REQUIREMENTS OR                                                          metal (11A), (11B),
 EXCEPTIONS:                                                                                 (11N), (21A),
1. This packing instruction may only                                                         (21B), (21N),
 be used for explosives of UN0082                                                            (31A), (31B),
 when they are mixtures of ammonium                                                          (31N).
 nitrate or other inorganic nitrates                                                     flexible (13H2),
 with other combustible substances                                                        (13H3), (13H4),
 that are not explosive ingredients.                                                      (13L2), (13L3),
 Such explosives must not contain                                                         (13L4), (13M2).
 nitroglycerin, similar liquid                                                           rigid plastics (11H1),
 organic nitrates, liquid or solid                                                        (11H2), (21H1),
 nitrocarbons, or chlorates.                                                              (21H2), (31H1),
2. This packing instruction may only                                                      (31H2).
 be used for explosives of UN0241                                                        composite (11HZ1),
 that consist of water as an                                                              (11HZ2), (21HZ1),
 essential ingredient and high                                                            (21HZ2), (31HZ1),
 proportions of ammonium nitrate or                                                       (31HZ2).
 other oxidizers, some or all of
 which are in solution. The other
 constituents may include
 hydrocarbons or aluminum powder, but
 must not include nitro-derivatives
 such as trinitrotoluene.
3. Metal IBCs must not be used for
 UN0082 and UN 0241.
4. Flexible IBCs may only be used for
 solids.
130..................................  Not necessary..........  Not necessary..........  Boxes
Particular Packaging Requirements:                                                          Steel (4A).
1. The following applies to UN 0006,                                                     Aluminum (4B).
 0009, 0010, 0015, 0016, 0018, 0019,                                                     Other metal (4N).
 0034, 0035, 0038, 0039, 0048, 0056,                                                     Wood natural, ordinary
 0137, 0138, 0168, 0169, 0171, 0181,                                                      (4C1).
 0182, 0183, 0186, 0221, 0238, 0243,                                                     Wood natural, sift-
 0244, 0245, 0246, 0254, 0280, 0281,                                                      proof walls (4C2).
 0286, 0287, 0297, 0299, 0300, 0301,                                                     Plywood (4D).
 0303, 0321, 0328, 0329, 0344, 0345,                                                     Reconstituted wood
 0346, 0347, 0362, 0363, 0370, 0412,                                                      (4F).
 0424, 0425, 0434, 0435, 0436, 0437,                                                     Fiberboard (4G).
 0438, 0451, 0459 and 0488. Large and                                                    Plastics, expanded
 robust explosives articles, normally                                                     (4H1).
 intended for military use, without                                                      Plastics, solid (4H2).
 their means of initiation or with                                                       Drums.
 their means of initiation containing                                                    Steel (1A1 or 1A2).
 at least two effective protective                                                       Aluminum (1B1 or 1B2).
 features, may be carried unpackaged.                                                    Other metal (1N1 or
 When such articles have propelling                                                       1N2).
 charges or are self-propelled, their                                                    Plywood (1D).
 ignition systems must be protected                                                      Fiber (1G).
 against stimuli encountered during                                                      Plastics (1H1 or 1H2).
 normal conditions of transport. A                                                       Large Packagings.
 negative result in Test Series 4 on                                                     Steel (50A).
 an unpackaged article indicates that                                                    Aluminum (50B).
 the article can be considered for                                                       Metal other than steel
 transport unpackaged. Such                                                               or aluminum (50N).
 unpackaged articles may be fixed to                                                     Rigid plastics (50H).
 cradles or contained in crates or                                                       Natural wood (50C).
 other suitable handling devices. 2.                                                     Plywood (50D).
 Subject to approval by the Associate                                                    Reconstituted wood
 Administrator, large explosive                                                           (50F).
 articles, as part of their                                                              Rigid fiberboard (50G).
 operational safety and suitability
 tests, subjected to testing that
 meets the intentions of Test Series
 4 of the UN Manual of Tests and
 Criteria with successful test
 results, may be offered for
 transportation in accordance with
 the requirements of this subchapter.
131..................................  Bags...................  Not Necessary..........  Boxes

[[Page 1080]]

 
PARTICULAR PACKING REQUIREMENTS OR     paper                                                steel (4A).
 EXCEPTIONS:                           plastics...............                           aluminum (4B).
1. For UN 0029, 0267 and 0455, bags    Receptacles............                           other metal (4N).
 and reels may not be used as inner    fiberboard.............                           wood, natural, ordinary
 packagings                            metal..................                            (4C1).
2. For UN 0030, 0255 and 0456, inner   plastics...............                           natural wood, sift
 packagings are not required when      wood...................                            proof walls (4C2).
 detonators are packed in pasteboard   Reels..................                           plywood (4D).
 tubes, or when their leg wires are                                                      reconstituted wood
 wound on spools with the caps either                                                     (4F).
 placed inside the spool or securely                                                     fiberboard (4G).
 taped to the wire on the spool, so                                                      Drums.
 as to restrict free moving of the                                                       steel (1A1 or 1A2).
 caps and to protect them from impact                                                    Aluminum (1B1 or 1B2).
 forces                                                                                  other metal (1N1 or
3. For UN 0360, 0361 and 0500,                                                            1N2).
 detonators are not required to be                                                       Plywood (1D).
 attached to the safety fuse, metal-                                                     fiber (1G).
 clad mild detonating cord,                                                              plastics (1H1 or 1H2).
 detonating cord, or shock tube.
 Inner packagings are not required if
 the packing configuration restricts
 free moving of the caps and protects
 them from impact forces
132(a)...............................  Not necessary..........  Not necessary..........  Boxes
For articles consisting of closed                                                           steel (4A).
 metal, plastic or fiberboard casings                                                    aluminum (4B).
 that contain detonating explosives,                                                     other metal (4N).
 or consisting of plastics-bonded                                                        wood, natural; ordinary
 detonating explosives                                                                    (4C1).
                                                                                         wood, natural, sift
                                                                                          proof walls (4C2).
                                                                                         plywood (4D).
                                                                                         reconstituted wood
                                                                                          (4F).
                                                                                         fiberboard (4G).
                                                                                         plastics, solid (4H2).
132(b)...............................  Receptacles............  Not necessary..........  Boxes
For articles without closed casings    fiberboard                                           steel (4A). aluminum
                                       metal..................                               (4B).
                                       plastics...............                           other metal (4N).
                                       wood...................                           wood, natural, ordinary
                                       Sheets.................                            (4C1).
                                       paper..................                           wood, natural, sift
                                       plastics...............                            proof walls (4C2).
                                                                                         plywood (4D).
                                                                                         reconstituted wood
                                                                                          (4F).
                                                                                         fiberboard (4G).
                                                                                         plastics, solid (4H2).
133..................................  Receptacles............  .......................  Boxes.
PARTICULAR PACKING REQUIREMENTS OR     fiberboard               Intermediate packagings     steel (4A).
 EXCEPTIONS:                           metal..................   are only required when  aluminum (4B).
1. For UN 0043, 0212, 0225, 0268 and   plastics...............   trays are used as       other metal (4N).
 0306 trays are not authorized as      wood...................   inner packagings.       wood, natural, ordinary
 inner packagings                      Trays, fitted with       Receptacles............   (4C1).
                                        dividing partitions     fiberboard.............  wood, natural, sift
                                        fiberboard plastics     metal..................   proof walls (4C2).
                                        wood.                   plastics...............  plywood (4D).
                                                                wood...................  reconstituted wood
                                                                                          (4F).
                                                                                         fiberboard (4G).
                                                                                         plastics, solid (4H2).
134..................................  Bags...................  Not necessary..........  Boxes.

[[Page 1081]]

 
                                       water resistant                                      steel (4A).
                                       Receptacles............                           aluminum (4B).
                                       fiberboard.............                           other metal (4N).
                                       metal..................                           wood, natural, ordinary
                                       plastics...............                            (4C1).
                                       wood...................                           wood, natural, sift
                                       Sheets.................                            proof walls (4C2).
                                       fiberboard, corrugated.                           plywood (4D).
                                       Tubes..................                           reconstituted wood
                                       fiberboard.............                            (4F).
                                                                                         fiberboard (4G).
                                                                                         plastics, expanded
                                                                                          (4H1).
                                                                                         plastics, solid (4H2).
                                                                                         Drums.
                                                                                         fiberboard (1G).
                                                                                         plastics (1H1 or 1H2).
                                                                                         steel (1A1 or 1A2).
                                                                                         aluminum (1B1 or 1B2).
                                                                                         other metal (1N1 or
                                                                                          1N2).
                                                                                         plywood (1D).
135..................................  Bags...................  Not necessary..........  Boxes.
                                       paper                                                steel (4A).
                                       plastics...............                           aluminum (4B).
                                       Receptacles............                           other metal (4N).
                                       fiberboard.............                           wood, natural, ordinary
                                       metal..................                            (4C1).
                                       plastics...............                           wood, natural, sift
                                       wood...................                            proof walls (4C2).
                                       Sheets.................                           plywood (4D).
                                       paper..................                           reconstituted wood
                                       plastics...............                            (4F).
                                                                                         fiberboard (4G).
                                                                                         plastics, expanded
                                                                                          (4H1).
                                                                                         plastics, solid (4H2).
                                                                                         Drums.
                                                                                         steel (1A1 or 1A2).
                                                                                         aluminum (1B1 or 1B2).
                                                                                         other metal (1N1 or
                                                                                          1N2)
                                                                                         plywood (1D).
                                                                                         fiber (1G).
                                                                                         plastics (1H1 or 1H2).
136..................................  Bags...................  Not necessary..........  Boxes.
                                       plastics                                             steel (4A).
                                       textile................                           aluminum (4B)
                                       Boxes..................                           other metal (4N).
                                       fiberboard.............                           wood, natural, ordinary
                                       plastics...............                            (4C1).
                                       wood...................                           wood, natural, sift
                                       Dividing partitions in                             proof walls (4C2).
                                        the outer packagings.                            plywood (4D).
                                                                                         reconstituted wood
                                                                                          (4F).
                                                                                         fiberboard (4G).
                                                                                         plastics, solid (4H2).
                                                                                         Drums.
                                                                                         steel (1A1 or 1A2).
                                                                                         aluminum (1B1 or 1B2).
                                                                                         other metal (1N1 or
                                                                                          1N2).
                                                                                         plywood (1D).
                                                                                         fiber (1G).
                                                                                         plastics (1H1 or 1H2).
137..................................  Bags...................  Not necessary..........  Boxes.

[[Page 1082]]

 
PARTICULAR PACKING REQUIREMENTS OR     plastics                                             steel (4A).
 EXCEPTIONS:                           Boxes..................                           aluminum (4B).
For UN 0059, 0439, 0440 and 0441,      fiberboard.............                           other metal (4N).
 when the shaped charges are packed    wood...................                           wood, natural, ordinary
 singly, the conical cavity must face  Tubes..................                            (4C1).
 downwards and the package marked      fiberboard.............                           wood, natural, sift
 ``THIS SIDE UP''. When the shaped     metal..................                            proof walls (4C2).
 charges are packed in pairs, the      plastics...............                           plywood (4D).
 conical cavities must face inwards    Dividing partitions in                            reconstituted wood
 to minimize the jetting effect in      the outer packagings.                             (4F).
 the event of accidental initiation                                                      fiberboard (4G).
                                                                                         Drums.
                                                                                         steel (1A1 or 1A2).
                                                                                         aluminum (1B1 or 1B2).
                                                                                         other metal (1N1 or
                                                                                          1N2).
                                                                                         plywood (1D).
                                                                                         fiber (1G).
                                                                                         plastics (1H1 or 1H2).
138..................................  Bags...................  Not necessary..........  Boxes.
PARTICULAR PACKING REQUIREMENTS OR     Plastics                                             steel (4A).
 EXCEPTIONS:                                                                             aluminum (4B).
If the ends of the articles are                                                          other metal (4N).
 sealed, inner packagings are not                                                        wood, natural, ordinary
 necessary                                                                                (4C1).
                                                                                         wood, natural, sift
                                                                                          proof walls (4C2).
                                                                                         plywood (4D).
                                                                                         reconstituted wood
                                                                                          (4F).
                                                                                         fiberboard (4G).
                                                                                         plastics, solid (4H2).
                                                                                         Drums.
                                                                                         fiberboard (1G).
                                                                                         plastics (1H1 or 1H2).
                                                                                         steel (1A1 or 1A2).
                                                                                         aluminum (1B1 or 1B2).
                                                                                         other metal (1N1 or
                                                                                          1N2).
139..................................  Bags...................  Not necessary..........  Boxes.
PARTICULAR PACKING REQUIREMENTS OR     plastics                                             steel (4A).
 EXCEPTIONS:                           Receptacles............                           aluminum (4B).
1. For UN 0065, 0102, 0104, 0289 and   fiberboard.............                           other metal (4N).
 0290, the ends of the detonating      metal..................                           wood, natural, ordinary
 cord must be sealed, for example, by  plastics...............                            (4C1).
 a plug firmly fixed so that the       wood...................                           wood, natural, sift
 explosive cannot escape. The ends of  Reels..................                            proof walls (4C2).
 CORD DETONATING flexible must be      Sheets.................                           plywood (4D).
 fastened securely                     paper..................                           reconstituted wood
2. For UN0065 and UN0289, inner        plastics...............                            (4F).
 packagings are not required when                                                        fiberboard (4G).
 they are fastened securely in coils                                                     plastics, solid (4H2).
                                                                                         Drums.
                                                                                         steel (1A1 or 1A2).
                                                                                         aluminum (1B1 or 1B2).
                                                                                         other metal (1N1 or
                                                                                          1N2).
                                                                                         plywood (1D).
                                                                                         fiber (1G).
                                                                                         plastics (1H1 or 1H2).
140..................................  Bags...................  Not necessary..........  Boxes.

[[Page 1083]]

 
PARTICULAR PACKING REQUIREMENTS OR     plastics                                             steel (4A).
 EXCEPTIONS:                           Reels..................                           aluminum (4B).
1. If the ends of UN0105 are sealed,   Sheets.................                           other metal (4N).
 no inner packagings are required      paper, kraft...........                           wood, natural, ordinary
2. For UN0101, the packaging must be   plastics...............                            (4C1).
 sift-proof except when the fuse is    Receptacles............                           wood, natural, sift
 covered by a paper tube and both      wood...................                            proof walls (4C2).
 ends of the tube are covered with                                                       plywood (4D).
 removable caps                                                                          reconstituted wood
3. For UN0101, steel or aluminum                                                          (4F).
 boxes or drums must not be used                                                         fiberboard (4G).
                                                                                         plastics, solid (4H2).
                                                                                         Drums.
                                                                                         plastics (1H1 or 1H2).
                                                                                         steel (1A1 or 1A2).
                                                                                         aluminum (1B1 or 1B2).
                                                                                         other metal (1N1 or
                                                                                          1N2).
                                                                                         plywood (1D).
                                                                                         fiber (1G).
141..................................  Receptacles............  Not necessary..........  Boxes.
                                       fiberboard                                           steel (4A).
                                       metal..................                           aluminum (4B).
                                       plastics...............                           other metal (4N).
                                       wood...................                           wood, natural, ordinary
                                       Trays, fitted with                                 (4C1).
                                        dividing partitions.                             wood, natural, sift
                                       plastics...............                            proof walls (4C2).
                                       wood...................                           plywood (4D).
                                       Dividing partitions in                            reconstituted wood
                                        the outer packagings.                             (4F).
                                                                                         fiberboard (4G).
                                                                                         plastics, solid (4H2).
                                                                                         Drums.
                                                                                         steel (1A1 or 1A2).
                                                                                         aluminum (1B1 or 1B2).
                                                                                         other metal (1N1 or
                                                                                          1N2).
                                                                                         plywood (1D).
                                                                                         fiber (1G).
                                                                                         plastics (1H1 or 1H2).
142..................................  Bags...................  Not necessary..........  Boxes.
                                       paper                                                steel (4A).
                                       plastics...............                           aluminum (4B).
                                       Receptacles............                           other metal (4N).
                                       fiberboard.............                           wood, natural, ordinary
                                       metal..................                            (4C1).
                                       plastics...............                           wood, natural, sift
                                       wood...................                            proof walls (4C2).
                                       Sheets.................                           plywood (4D).
                                       paper..................                           reconstituted wood
                                       Trays, fitted with                                 (4F).
                                        dividing partitions.                             fiberboard (4G).
                                       plastics...............                           plastics, solid (4H2).
                                                                                         Drums.
                                                                                         steel (1A1 or 1A2).
                                                                                         aluminum (1B1 or 1B2).
                                                                                         other metal (1N1 or
                                                                                          1N2).
                                                                                         plywood (1D).
                                                                                         fiber (1G).
                                                                                         plastics (1H1 or 1H2).
143..................................  Bag....................  Not necessary..........  Boxes.

[[Page 1084]]

 
PARTICULAR PACKING REQUIREMENTS OR     paper, kraft                                         steel (4A).
 EXCEPTIONS:                           plastics...............                           aluminum (4B).
1. For UN 0271, 0272, 0415 and 0491    textile................                           other metal (4N).
 when metal packagings are used,       textile, rubberized....                           wood, natural, ordinary
 metal packagings must be so           Receptacles............                            (4C1).
 constructed that the risk of          fiberboard.............                           wood, natural, sift
 explosion, by reason of increase in   metal..................                            proof walls (4C2).
 internal pressure from internal or    plastics...............                           plywood (4D).
 external causes is prevented          wood...................                           reconstituted wood
2. Composite packagings (6HH2)         Trays, fitted with                                 (4F).
 (plastic receptacle with outer solid   dividing partitions.                             fiberboard (4G).
 box) may be used in lieu of           plastics...............                           plastics, solid (4H2).
 combination packagings                wood...................                           Drums.
                                                                                         steel (1A1 or 1A2).
                                                                                         aluminum (1B1 or 1B2).
                                                                                         other metal (1N1 or
                                                                                          1N2).
                                                                                         plywood (1D).
                                                                                         fiber (1G).
                                                                                         plastics (1H1 or 1H2).
144..................................  Receptacles............  Not necessary..........  Boxes.
PARTICULAR PACKING REQUIREMENTS OR     fiberboard                                           steel (4A).
 EXCEPTIONS:                           metal..................                           aluminum (4B)
For UN0248 and UN 0249, packagings     plastics...............                           other metal (4N).
 must be protected against the         wood...................                           wood, natural, ordinary
 ingress of water. When CONTRIVANCES,  Dividing partitions in                             (4C1) with metal
 WATER ACTIVATED are transported        the outer packagings.                             liner.
 unpackaged, they must be provided                                                       plywood (4D) with metal
 with at least two independent                                                            liner.
 protective features that prevent the                                                    reconstituted wood (4F)
 ingress of water                                                                         with metal liner.
                                                                                         plastics, expanded
                                                                                          (4H1).
                                                                                         plastics, solid (4H2).
                                                                                         Drums.
                                                                                         steel (1A1 or 1A2).
                                                                                         aluminum (1B1 or 1B2).
                                                                                         other metal (1N1 or
                                                                                          1N2).
                                                                                         plastics (1H1 or 1H2).
                                                                                         plywood (1D).
----------------------------------------------------------------------------------------------------------------

* * * * *

0
24. In Sec.  173.63, paragraph (b) is revised to read as follows:


Sec.  173.63  Packaging exceptions.

* * * * *
    (b) Limited quantities of Cartridges, small arms, Cartridges, power 
devices, Cartridges for tools, blank, and Cases, cartridge, empty with 
primer. (1)(i) Cartridges, small arms, Cartridges, power devices, 
Cartridges for tools, blank, and Cases, cartridge, empty with primer 
that have been classed as Division 1.4S explosive may be offered for 
transportation and transported as limited quantities when packaged in 
accordance with paragraph (b)(2) of this section. Packages containing 
such articles may be marked with either the marking prescribed in Sec.  
172.315(a) or (b) of this subchapter and offered for transportation and 
transported by any mode. For transportation by aircraft, the package 
must conform to the applicable requirements of Sec.  173.27 of this 
part. In addition, packages containing such articles offered for 
transportation by aircraft must be marked with the proper shipping name 
as prescribed in the Sec.  172.101 Hazardous Materials Table of this 
subchapter. Packages containing such articles are not subject to the 
shipping paper requirements of subpart C of part 172 of this subchapter 
unless the material meets the definition of a hazardous substance, 
hazardous waste, marine pollutant, or is offered for transportation and 
transported by aircraft or vessel. Additionally, packages containing 
such articles are excepted from the requirements of subparts E 
(Labeling) and F (Placarding) of part 172 of this subchapter.
    (ii) Until December 31, 2012, a package containing such articles 
may be marked with the proper shipping name ``Cartridges, small arms'' 
or ``Cartridges for tools, blank (used to project fastening devices)'' 
and reclassed as ``ORM-D-AIR'' material if it contains properly 
packaged articles as authorized by this subchapter on October 1, 2010. 
Additionally, for transportation by aircraft, Cartridges, power devices 
must be successfully tested under the UN Test Series 6(d) criteria for 
reclassification as ORM-D-AIR material effective July 1, 2011. Until 
December 31, 2020, a package containing such articles may be marked 
with the proper shipping name ``Cartridges, small arms'' or 
``Cartridges, power device (used to project fastening devices)'' and 
reclassed as ``ORM-D'' material if it contains properly packaged 
articles as authorized by this subchapter on October 1, 2010.
    (iii) Cartridges, small arms and Cartridges for tools, blank, and 
Cases, cartridge empty with primer that may be shipped as a limited 
quantity or ORM-D material are as follows:
    (A) Ammunition for rifle, pistol or shotgun;

[[Page 1085]]

    (B) Ammunition with inert projectiles or blank ammunition;
    (C) Ammunition having no tear gas, incendiary, or detonating 
explosive projectiles;
    (D) Ammunition not exceeding 12.7 mm (50 caliber or 0.5 inch) for 
rifle or pistol, cartridges or 8 gauge for shotshells;
    (E) Cartridges for tools, blank; and
    (F) Cases, cartridge, empty with primer.
    (2) Packaging for Cartridges, small arms, Cartridges for tools, 
blank, Cases, cartridge empty with primer as limited quantity or ORM-D 
material must be as follows:
    (i) Ammunition must be packed in inside boxes, or in partitions 
that fit snugly in the outside packaging, or in metal clips;
    (ii) Primers must be protected from accidental initiation;
    (iii) Inside boxes, partitions or metal clips must be packed in 
securely-closed strong outside packagings;
    (iv) Maximum gross weight is limited to 30 kg (66 pounds) per 
package; and
    (v) Cartridges for tools, blank, Cases, cartridge, empty with 
primer, and 22 caliber rim-fire cartridges may be packaged loose in 
strong outside packagings.
* * * * *

0
25. In Sec.  173.115, paragraph (k), is revised to read as follows:
* * * * *
    (k) For Division 2.2 gases, the oxidizing ability shall be 
determined by tests or by calculation in accordance with ISO 10156 
(including Technical Corrigendum 1) (IBR, see Sec.  171.7 of this 
subchapter).
* * * * *

0
26. In Sec.  173.121, paragraph (b)(1)(iii) is revised to read as 
follows:


Sec.  173.121  Class 3--Assignment of packing group.

* * * * *
    (b) * * *
    (1) * * *
    (iii) The capacity of the packaging is not more than 30 L (7.9 
gallons); except that for transportation by highway, rail or cargo 
aircraft, the capacity of the package is not more than 100 L (26.3 
gallons); and
* * * * *

0
27. In Sec.  173.158, paragraphs (d)(2), (e), (f)(3), (g), and (h) 
introductory text are revised to read as follows:


Sec.  173.158  Nitric Acid.

* * * * *
    (d) * * *
    (2) In combination packagings with 1A2, 1B2, 1N2, 1D, 1G, 1H2, 3H2, 
4A, 4B, 4N or 4G outer packagings with inner glass packagings of 2.5 L 
(0.66 gallons) or less capacity cushioned with a non-reactive, 
absorbent material and packed within a tightly closed intermediate 
packaging of metal or plastic.
    (e) Nitric acid of less than 90 percent concentration, when offered 
for transportation or transported by rail, highway, or water may be 
packaged in 4A, 4B, or 4N metal boxes, 4G fiberboard boxes or 4C1, 4C2, 
4D or 4F wooden boxes with inside glass packagings of not over 2.5 L 
(0.66 gallon) capacity each.
    (f) * * *
    (3) In combination packagings with 1A2, 1B2, 1N2, 1D, 1G, 1H2, 3H2, 
4C1, 4C2, 4D, 4F, 4G, 4A, 4B or 4N outer packagings and plastic inner 
packagings not over 2.5 L (0.66 gallon) capacity further individually 
overpacked in tightly closed metal packagings.
    (g) Nitric acid of more than 70 percent concentration, when offered 
for transportation or transported by cargo aircraft only, must be 
packaged in combination packagings with 1A2, 1B2, 1N2, 1D, 1G, 1H2, 
3H2, 4C1, 4C2, 4D, 4F, 4G, 4A, 4B or 4N outer packagings with glass or 
earthenware inner packagings of not over 1 L (0.3 gallon) or glass 
ampoules of not over 0.5 L (0.1 gallon).
    (h) Nitric acid of less than 70 percent concentration, when offered 
for transportation in cargo aircraft only must be packaged in 
combination packagings with 1A2, 1B2, 1N2, 1D, 1G, 1H2, 3H2, 4C1, 4C2, 
4D, 4F, 4G, 4A, 4B or 4N outer packagings with inner packagings of--
* * * * *

0
28. In Sec.  173.159a, add paragraph (d)(3) to read as follows:


Sec.  173.159a  Exceptions for non-spillable batteries.

* * * * *
    (d) * * *
    (3) For transport by aircraft, must be transported as cargo and may 
not be carried onboard an aircraft by passengers or crewmembers in 
carry-on baggage, checked baggage, or on their person unless 
specifically excepted by Sec.  175.10.

0
29. In Sec.  173.160 is revised to read as follows:


Sec.  173.160  Bombs, smoke, non-explosive (corrosive).

    Bombs, smoke, non-explosive may be shipped provided they are 
without ignition elements, bursting charges, detonating fuses or other 
explosive components. They must be packaged in metal (4A, 4B, 4N), 
wooden (4C1, 4C2), plywood (4D), or reconstituted wood (4F), fiberboard 
(4G) or solid plastic (4H2) boxes, or metal (1A2, 1B2, 1N2), plastic 
(1H2), plywood drums (1D), or fiber (1G) drums that meet Packing Group 
II requirements.

0
30. In Sec.  173.162, paragraphs (a)(1), (a)(2), and (c) are revised to 
read as follows:


Sec.  173.162  Gallium.

    (a) * * *
    (1) In combination packagings intended to contain liquids 
consisting of glass, earthenware or rigid plastic inner packagings with 
a maximum net mass of 15 kg (33 pounds) each. The inner packagings must 
be packed in wood boxes (4C1, 4C2, 4D, 4F), fiberboard boxes (4G), 
plastic boxes (4H1, 4H2), fiber drums (1G) or steel, metal, other than 
steel or aluminum, and plastic drums or jerricans (1A1, 1A2, 1N1, 1N2, 
1H1, 1H2, 3A2 or 3H2) with sufficient cushioning materials to prevent 
breakage. Either the inner packagings or the outer packagings must have 
an inner liner that is leakproof or bags of strong leakproof and 
puncture-resistant material impervious to the contents and completely 
surrounding the contents to prevent it from escaping from the package, 
irrespective of its position.
    (2) In packagings intended to contain liquids consisting of semi-
rigid plastic inner packagings of not more than 2.5 kg (5.5 pounds) net 
capacity each, individually enclosed in a sealed, leak-tight bag of 
strong puncture-resistant material. The sealed bags must be packed in 
wooden (4C1, 4C2), plywood (4D), reconstituted wood (4F), fiberboard 
(4G), plastic (4H1, 4H2) or metal, other than steel or aluminum (4N) 
boxes or in fiber (1G), steel (1A1, 1A2), metal, other than steel or 
aluminum (1N1, 1N2), or plastic (1H1 or 1H2) drums, that are lined with 
leak-tight, puncture-resistant material. Bags and liner material must 
be chemically resistant to gallium.
* * * * *
    (c) Manufactured articles or apparatuses, each containing not more 
than 100 mg (0.0035 ounce) of gallium and packaged so that the quantity 
of gallium per package does not exceed 1 g (0.35 ounce) are not subject 
to the requirements of this subchapter. For transportation by aircraft, 
such articles and apparatuses must be transported as cargo and may not 
be carried onboard an aircraft by passengers or crewmembers in carry-on 
baggage, checked baggage, or on their person unless specifically 
excepted by Sec.  175.10.

0
31. In Sec.  173.164:
0
a. Paragraphs (a)(1) is revised;

[[Page 1086]]

0
b. Paragraph (a)(5) is added;
0
c. Paragraphs (b) and (c)(2) are revised; and
0
d. Paragraph (f) is added.

    The revisions and additions read as follows:


Sec.  173.164  Mercury (metallic and articles containing mercury).

    (a) * * *
    (1) In inner packagings of earthenware, glass or plastic containing 
not more than 3.5 kg (7.7 pounds) of mercury, or inner packagings that 
are glass ampoules containing not more than 0.5 kg (1.1 pounds) of 
mercury, or iron or steel quicksilver flasks containing not more than 
35 kg (77 pounds) of mercury. The inner packagings or flasks must be 
packed in steel drums (1A1, 1A2), metal, other than steel or aluminum 
drums (1N1, 1N2), steel jerricans (3A2), wooden boxes (4C1, 4C2), 
plywood boxes (4D), reconstituted wood boxes (4F), fiberboard boxes 
(4G), metal, other than steel or aluminum boxes (4N), plastic boxes 
(4H2), plywood drums (1D) or fiber drums (1G).
* * * * *
    (5) When transported as cargo, lamps are excepted from the 
requirements of this subchapter provided, each lamp contains not more 
than 1 g of mercury and is packaged so that there is not more than 30 g 
of mercury per package. Packages must be so designed and constructed 
such that when dropped from a height of not less than 0.5 meter (1.5 
feet) the packages must still be fit for transport and there must be no 
damage to the contents.
    (b) When transported as cargo, manufactured articles or 
apparatuses, each containing not more than 100 mg (0.0035 ounce) of 
mercury and packaged so that the quantity of mercury per package does 
not exceed 1 g (0.035 ounce) are not subject to the requirements of 
this subchapter.
    (c) * * *
    (2) When transported as cargo, thermometers, switches and relays, 
each containing a total quantity of not more than 15 g (0.53 ounces) of 
mercury, are excepted from the requirements of this subchapter if 
installed as an integral part of a machine or apparatus and so fitted 
that shock of impact damage, leading to leakage of mercury, is unlikely 
to occur under conditions normally incident to transport.
* * * * *
    (f) For vessel transport, manufactured articles or instruments 
containing less than 0.45 kg (1.0 pound) of mercury are not subject to 
the requirements of this subchapter.

0
32. Section 173.165 is revised to read as follows:


Sec.  173.165  Polyester resin kits.

    (a) Polyester resin kits consisting of a base material component 
(Class 3, Packing Group II or III) and an activator component (Type D, 
E, or F organic peroxide that does not require temperature control)--
    (1) The organic peroxide component must be packed in inner 
packagings not over 125 mL (4.22 fluid ounces) net capacity each for 
liquids or 500 g (17.64 ounces) net capacity each for solids.
    (2)(i) Except for transportation by aircraft, the flammable liquid 
component must be packaged in suitable inner packagings.
    (ii) For transportation by aircraft, a Packing Group II base 
material is limited to a quantity of 5 L (1.3 gallons) in metal or 
plastic inner packagings and 1 L (0.3 gallons) in glass inner 
packagings. A Packing Group III base material is limited to a quantity 
of 10 L (2.6 gallons) in metal or plastic inner packagings and 2.5 L 
(0.66 gallons) in glass inner packagings.
    (3) If the flammable liquid component and the organic peroxide 
component will not interact dangerously in the event of leakage, they 
may be packed in the same outer packaging.
    (4) The Packing Group assigned will be II or III, according to the 
criteria for Class 3, applied to the base material. Additionally, 
polyester resin kits must be packaged in specification combination 
packagings, based on the performance level required of the base 
material (II or III) contained within the kit, as prescribed in 
Sec. Sec.  173.202 or 173.203 of this subchapter, as appropriate.
    (5) For transportation by aircraft, the following additional 
requirements apply:
    (i) Closures on inner packagings containing liquids must be secured 
by secondary means;
    (ii) Inner packagings containing liquids must be capable of meeting 
the pressure differential requirements prescribed in Sec.  173.27(c); 
and
    (iii) The total quantity of activator and base material may not 
exceed 5 kg (11 lbs) per package for a Packing Group II base material. 
The total quantity of activator and base material may not exceed 10 kg 
(22 lbs) per package for a Packing Group III base material. The total 
quantity of polyester resin kits per package is calculated on a one-to-
one basis (i.e., 1 L equals 1 kg).
    (b) Polyester resin kits are eligible for the Small Quantity 
exceptions in Sec.  173.4 and the Excepted Quantity exceptions in Sec.  
173.4a, as applicable.
    (c) Limited quantities. Limited quantity packages of polyester 
resin kits are excepted from labeling requirements, unless the material 
is offered for transportation or transported by aircraft, and are 
excepted from the specification packaging requirements of this 
subchapter when packaged in combination packagings according to this 
paragraph. For transportation by aircraft, only hazardous material 
authorized aboard passenger-carrying aircraft may be transported as a 
limited quantity. A limited quantity package that conforms to the 
provisions of this section is not subject to the shipping paper 
requirements of subpart C of part 172 of this subchapter, unless the 
material meets the definition of a hazardous substance, hazardous 
waste, marine pollutant, or is offered for transportation and 
transported by aircraft or vessel, and is eligible for the exceptions 
provided in Sec.  173.156 of this part. In addition, shipments of 
limited quantities are not subject to subpart F (Placarding) of part 
172 of this subchapter. Each package must conform to the general 
packaging requirements of subpart B of this part and may not exceed 30 
kg (66 pounds) gross weight.
    (1) For other than transportation by aircraft, the organic peroxide 
component must be packed in inner packagings not over 125 mL (4.22 
fluid ounces) net capacity each for liquids or 500 g (17.64 ounces) net 
capacity each for solids. For transportation by aircraft, the organic 
peroxide component must be packed in inner packagings not over 30 mL 
(4.22 fluid ounces) net capacity each for liquids or 100 g (17.64 
ounces) net capacity each for solids.
    (2) Except for transportation by aircraft, the flammable liquid 
component must be packed in inner packagings not over 5 L (1.3 gallons) 
net capacity each for a Packing Group II and Packing Group III liquid. 
For transportation by aircraft, the flammable liquid component must be 
packed in inner packagings not over 1 L (0.26 gallons) net capacity 
each for a Packing Group II material. The flammable liquid component 
must be packed in metal or plastic inner packagings not over 5.0 L (1.3 
gallons) net capacity each or glass inner packagings not over 2.5 L 
(0.66 gallons) net capacity each for a Packing Group III material.
    (3) If the flammable liquid component and the organic peroxide 
component will not interact dangerously in the event of leakage, they 
may be packed in the same outer packaging.
    (4) For transportation by aircraft, the following additional 
requirements apply:

[[Page 1087]]

    (i) Closures. Closures on inner packagings containing liquids must 
be secured by secondary means as prescribed in Sec.  173.27(d);
    (ii) Liquids. Inner packagings containing liquids must be capable 
of meeting the pressure differential requirements prescribed in Sec.  
173.27(c);
    (iii) Quantity. The total quantity of activator and base material 
may not exceed 1 kg (2.2 lbs) per package for a Packing Group II base 
material. The total quantity of activator and base material may not 
exceed 5 kg (11 lbs) per package for a Packing Group III base material. 
The total quantity of polyester resin kits per package is calculated on 
a one-to-one basis (i.e., 1 L equals 1 kg);
    (iv) Drop test capability. Fragile inner packagings must be 
packaged to prevent failure under conditions normally incident to 
transport. Packages of consumer commodities must be capable of 
withstanding a 1.2 m drop on solid concrete in the position most likely 
to cause damage; and
    (v) Stack test capability. Packages of consumer commodities must be 
capable of withstanding, without failure or leakage of any inner 
packaging and without any significant reduction in effectiveness, a 
force applied to the top surface for a duration of 24 hours equivalent 
to the total weight of identical packages if stacked to a height of 3.0 
m (including the test sample).
    (d) Consumer commodities. Until December 31, 2020, a limited 
quantity package of polyester resin kits that are also consumer 
commodities as defined in Sec.  171.8 of this subchapter may be renamed 
``Consumer commodity'' and reclassed as ORM-D or, until December 31, 
2012, as ORM-D-AIR material and offered for transportation and 
transported in accordance with the applicable provisions of this 
subchapter in effect on October 1, 2010.

0
33. In Sec.  173.175, paragraph (g) is added to read as follows:


Sec.  173.175  Permeation devices.

* * * * *
    (g) For transportation by aircraft, permeation devices must be 
transported as cargo and may not be carried onboard an aircraft by 
passengers or crewmembers in carry-on baggage, checked baggage, or on 
their person unless specifically excepted by Sec.  175.10.

0
34. Section 173.176 is added to read as follows:


Sec.  173.176  Capacitors.

    (a) Capacitors, including capacitors containing an electrolyte that 
does not meet the definition of any hazard class or division as defined 
in this part, must conform to the following requirements:
    (1) Capacitors not installed in equipment must be transported in an 
uncharged state;
    (2) Each capacitor must be protected against a potential short 
circuit hazard in transport as follows:
    (i) Except for transport by air, when a capacitor's energy storage 
capacity is less than or equal to 10Wh or when the energy storage 
capacity of each capacitor in a module is less than or equal to 10 Wh, 
the capacitor or module must be protected against short circuit or be 
fitted with a metal strap connecting the terminals; and
    (ii) For transport by air, or when the energy storage capacity of a 
capacitor or a capacitor in a module is more than 10 Wh, the capacitor 
or module must be fitted with a metal strap connecting the terminals;
    (3) Capacitors containing an electrolyte that meets the definition 
of one or more hazard class or division as defined in this part, must 
be designed to withstand a 95 kPa (0.95 bar, 14 psi) pressure 
differential;
    (4) Capacitors must be designed and constructed to safely relieve 
pressure that may build up in use, through a vent or a weak point in 
the capacitor casing. Any liquid that is released upon venting must be 
contained by the packaging or by the equipment in which a capacitor is 
installed; and
    (5) Capacitors must be marked with the energy storage capacity in 
Wh.
    (b) Capacitors must be packed in strong outer packagings. For 
transport by air, capacitors must be securely cushioned within the 
outer packagings. Capacitors installed in equipment may be offered for 
transport unpackaged or on pallets, when the capacitors are afforded 
equivalent protection by the equipment in which they are contained.
    (c) Capacitors containing an electrolyte not meeting the definition 
of any hazard class or division as defined in this part, including when 
installed in equipment, are not subject to any other requirements of 
this subchapter.
    (d) Capacitors containing an electrolyte that meets the definition 
of one or more hazard class or division as defined in this part, with 
an energy storage capacity of 10 Wh or less are not subject to any 
other requirements of this subchapter, when they are capable of 
withstanding a 1.2 m (3.9 feet) drop test unpackaged onto a rigid, non-
resilient, flat and horizontal surface without loss of contents.
    (e) Capacitors containing an electrolyte meeting the definition of 
one or more hazard class or division as defined in this part, that are 
not installed in equipment, and with an energy storage capacity of more 
than 10 Wh are subject to the requirements of this subchapter.
    (f) Capacitors installed in equipment and containing an electrolyte 
meeting the definition of one or more hazard class or division as 
defined in this part, are not subject to any other requirements of this 
subchapter, provided the equipment is packaged in a strong outer 
packaging and in such a manner as to prevent accidental functioning of 
the capacitors during transport. Large, robust equipment containing 
capacitors may be offered for transport unpackaged or on pallets when 
the capacitors are afforded equivalent protection by the equipment in 
which they are contained.

0
35. In Sec.  173.181, paragraphs (b) and (c) are revised to read as 
follows:


Sec.  173.181  Pyrophoric materials (liquids).

* * * * *
    (b) Steel boxes (4A), aluminum boxes (4B), metal boxes, other than 
steel or aluminum (4N), wooden boxes (4C1, 4C2, 4D, or 4F) or 
fiberboard boxes (4G); steel drums (1A1 or 1A2), aluminum drums (1B1 or 
1B2), metal drums, other than steel or aluminum (1N1 or 1N2), plywood 
drums (1D), or fiber drums (1G); or steel jerricans (3A1 or 3A2) or 
aluminum jerricans (3B1 or 3B2) enclosing not more than four strong, 
tight metal cans with inner receptacles of glass or metal, not over 1 L 
(0.3 gallon) capacity each, having positive screwcap closures 
adequately gasketed. Inner packagings must be cushioned on all sides 
with dry, absorbent, incombustible material in a quantity sufficient to 
absorb the entire contents. The strong, tight metal cans must be closed 
by positive means, not by friction.
    (c) Steel drums (1A1 or 1A2), aluminum drums (1B1 or 1B2), metal 
drums, other than steel or aluminum(1N1 or 1N2) or fiber drums (1G); 
steel jerricans (3A1 or 3A2) or aluminum jerricans (3B1 or 3B2); or 
steel boxes (4A), aluminum boxes (4B) or metal boxes, other than steel 
or aluminum (4N) not exceeding 220 L (58 gallons) capacity each with 
strong, tight inner metal cans not over 4.0 L (1 gallon) capacity each. 
The strong, tight metal cans must be closed by positive means, not 
friction.

0
36. In Sec.  173.183, paragraph (a) is revised to read as follows:


Sec.  173.183  Nitrocellulose base film.

* * * * *
    (a) In steel drums (1A2), aluminum drums (1B2), other metal drums 
(4A2), steel jerricans (3A2), aluminum jerricans (3B2), steel, aluminum 
or other metal (4A, 4B, 4N) boxes, wooden (4C1,

[[Page 1088]]

4C2), plywood (4D) or reconstituted wood (4F) boxes or plywood drums 
(1D) with each reel in a tightly closed metal can, polypropylene 
canister, or strong cardboard or fiberboard inner packaging with cover 
held in place by adhesive tape or paper; or
* * * * *

0
37. In Sec.  173.184, paragraph (b) is revised to read as follows:


Sec.  173.184  Highway or rail fuse.

* * * * *
    (b) Fusees (highway and railway) must be packaged in steel (1A2), 
aluminum (1B2) or other metal (1N2) drums, steel (3A2) or aluminum 
(3B2) jerricans, steel (4A), aluminum (4B) or other metal (4N) boxes, 
wooden (4C1, 4C2), plywood (4D) or reconstituted wood (4F) boxes or in 
fiberboard boxes (4G), plywood (1D) or fiber (1G) drums. If the fusees 
are equipped with spikes packagings must have reinforced ends to 
prevent penetration of spikes through the outer packagings; packages 
must be capable of passing drop test requirements (Sec.  178.603 of 
this subchapter), including at least one drop with spike in a downward 
position, and other requirements of part 178 of this subchapter, at the 
Packing Group II performance level.

0
38. In Sec.  173.186, paragraph (e) is revised to read as follows:


Sec.  173.186  Matches.

* * * * *
    (e) Packagings. Strike-anywhere matches must be tightly packed in 
securely closed chipboard, fiberboard, wooden, or metal inner 
packagings to prevent accidental ignition under conditions normally 
incident to transportation. Each inner packaging may contain no more 
than 700 strike-anywhere matches and must be packed in outer steel 
drums (1A1, 1A2), aluminum drums (1B1, 1B2), other metal drums (1N1, 
1N2), steel jerricans (3A1, 3A2), aluminum jerricans (3B1, 3B2), steel 
(4A), aluminum (4N), other metal (4N) boxes, wooden (4C1, 4C2), plywood 
(4D), reconstituted wood (4F) or fiberboard (4G) boxes, plywood (1D) or 
fiber (1G) drums. Gross weight of fiberboard boxes (4G) must not exceed 
30 kg (66 pounds). Gross weight of other outer packagings must not 
exceed 45 kg (100 pounds).

0
39. In Sec.  173.187, paragraphs (a) and (d) are revised to read as 
follows:


Sec.  173.187  Pyrophoric solids, metals or alloys, n.o.s.

* * * * *
    (a) In steel, aluminum or other metal boxes (4A, 4B or 4N) and 
contain no more than 15 kg (33 pounds) each.
* * * * *
    (d) In steel, aluminum or other metal drums (1A1, 1A2, 1B1, 1B2, 
1N1 or 1N2) with a gross mass not exceeding 150 kg (331 pounds) per 
drum.
* * * * *

0
40. In Sec.  173.188, paragraphs (a)(1) introductory text, (a)(2), and 
(b)(1) are revised to read as follows:


Sec.  173.188  White or yellow phosphorus.

* * * * *
    (a) * * *
    (1) Steel, aluminum or other metal boxes (4A, 4B or 4N) or wooden 
boxes (4C1, 4C2, 4D, or 4F) with:
* * * * *
    (2) Steel, aluminum or other metal drums (1A1, 1B1 or 1N1) not over 
250 L (66 gallons) capacity each or steel, aluminum or other metal 
drums (1A2, 1B2, or 1N2) not over 115 L (30 gallons) capacity each.
    (b) * * *
    (1) Steel, aluminum or other metal drums (1A2, 1B2 or 1N2) not over 
115 L (30 gallons) capacity each, or
* * * * *

0
41. In Sec.  173.189, paragraph (b) is revised to read as follows:


Sec.  173.189  Batteries containing sodium or cells containing sodium.

* * * * *
    (b) Cells must be protected against short circuit and must consist 
of hermetically sealed metal casings that fully enclose the hazardous 
materials and that are so constructed and closed as to prevent the 
release of the hazardous materials under normal conditions of 
transport. Cells must be placed in suitable outer packagings with 
sufficient cushioning material to prevent contact between cells and 
between cells and the internal surfaces of the outer packaging, and to 
ensure that no dangerous shifting of the cells within the outer 
packaging occurs in transport. Cells must be packaged in 1A2, 1B2, 1N2, 
1D, 1G, 1H2, 4A, 4B, 4N, 4C1, 4C2, 4D, 4F, 4G, 4H1, 4H2, 3A2, 3B2 or 
3H2) outer packagings that meet the requirements of part 178 of this 
subchapter at the Packing Group II performance level.
* * * * *

0
42. In Sec.  173.193, in paragraph (a), the first sentence is revised 
to read as follows:


Sec.  173.193  Bromoacetone, methyl bromide, chloropicrin and methyl 
bromide or methyl chloride mixtures, etc.

    (a) Bromoacetone must be packaged as follows in metal boxes (4A, 4B 
or 4N) or wooden boxes (4C1, 4C2, 4D or 4F) with inner glass 
receptacles or tubes in hermetically sealed metal receptacles in 
corrugated fiberboard cartons. * * *
* * * * *

0
43. In Sec.  173.194, paragraphs (b)(1) and (2) are revised to read as 
follows:


Sec.  173.194  Gas identification sets.

* * * * *
    (b) * * *
    (1) If the poisonous material does not exceed 5 mL (0.2 fluid 
ounce) if a liquid or 5 g (0.2 ounce) if a solid, it may be packed in 
glass inner receptacles of not over 120 mL (4.1 fluid ounces) each. 
Each glass receptacle, cushioned with absorbent material must be packed 
in a hermetically sealed metal can of not less than 0.30 mm (0.012 
inch) wall thickness. Metal cans, surrounded on all sides by at least 
25 mm (1 inch) of dry sawdust, must be packed in 4A, 4B or 4N metal 
boxes or 4C1, 4C2, 4D or 4F wooden boxes. Not more than 100 mL (3.4 
fluid ounces) or 100 g (3.5 ounces) of poisonous materials may be 
packed in one outer box.
    (2) If the poisonous material does not exceed 5 mL (0.2 fluid 
ounce) if a liquid or 20 g (0.7 ounce) if a solid, it may be packed in 
glass inner receptacles with screw-top closures of not less than 60 mL 
(2 fluid ounces), hermetically sealed. Twelve bottles containing 
poisonous material, not to exceed 100 mL (3.4 fluid ounces) or 100 g 
(3.5 ounces), or both, may be placed in a plastic carrying case, each 
glass receptacle surrounded by absorbent cushioning and each separated 
from the other by sponge rubber partitions. The plastic carrying case 
must be placed in a tightly fitting fiberboard box which in turn must 
be placed in a tightly fitting 4A, 4B or 4N metal box or 4C1, 4C2, 4D 
or 4F wooden box.

0
44. In Sec.  173.196, paragraph (a)(3) is revised to read as follows:


Sec.  173.196  Category A infectious substances.

    (a) * * *
    (3) A rigid outer packaging of adequate strength for its capacity, 
mass and intended use; including, drums (1A1, 1A2, 1B1, 1B2, 1N1, 1N2, 
1H1, 1H2, 1D, 1G); boxes (4A, 4B, 4N, 4C1, 4C2, 4D, 4F, 4G, 4H1, 4H2); 
or jerricans (3A1, 3A2, 3B1, 3B2, 3H1, 3H2). The outer packaging must 
measure not less than 100 mm (3.9 inches) at its smallest overall 
external dimension.
* * * * *

0
45. In Sec.  173.199, paragraph (d)(1) is revised to read as follows:

[[Page 1089]]

Sec.  173.199  Category B infectious substances.

    (d) * * *
    (1) Ice or dry ice must be placed outside the secondary packaging 
or in an overpack. Interior supports must be provided to secure the 
secondary packagings in the original position. If ice is used, the 
outside packaging must be leakproof or must have a leakproof liner. If 
dry ice is used, the outside packaging must permit the release of 
carbon dioxide gas and otherwise meet the provisions in Sec.  173.217. 
The primary receptacle and secondary packaging must maintain their 
integrity at the temperature of the refrigerant used, as well as the 
temperatures and pressures of transport by aircraft they could be 
subjected to if refrigeration were lost, and sufficient absorbent 
material must be provided to absorb all liquid, including melted ice.
* * * * *


Sec.  173.201  [Amended]

0
46. In Sec.  173.201, in the paragraph (b) list, the wording ``Metal 
box other than steel or aluminum: 4N'' is added between the entry 
``Solid plastic box: 4H2'' and the entry ``Inner packagings:''.


Sec.  173.202  [Amended]

0
47. In Sec.  173.202, in the paragraph (b) list, the wording ``Metal 
box other than steel or aluminum: 4N'' is added between the entry 
``Solid plastic box: 4H2'' and the entry ``Inner packagings:''.


Sec.  173.203  [Amended]

0
48. In Sec.  173.203, in the paragraph (b) list, the wording ``Metal 
box other than steel or aluminum: 4N'' is added between the entry 
``Solid plastic box: 4H2'' and the entry ``Inner packagings:''


Sec.  173.211  [Amended]

0
49. Section 173.211 is amended as follows:
0
a. In the paragraph (b) list, the wording ``Metal box other than steel 
or aluminum: 4N'' is added between the entry ``Solid plastic box: 4H2'' 
and the entry ``Inner packagings:''.
0
b. In the paragraph (c) list, the wording ``Metal box other than steel 
or aluminum with liner: 4N'' is added between the entry ``Aluminum box 
with liner: 4B'' and the entry ``Natural wood box, sift proof: 4C2''.


Sec.  173.212  [Amended]

0
50. Section 173.212 is amended as follows:
0
a. In the paragraph (b) list, the wording ``Metal box other than steel 
or aluminum: 4N'' is added between the entry ``Solid plastic box: 4H2'' 
and the entry ``Inner packagings:''.
0
b. In the paragraph (c) list, the wording ``Metal box other than steel 
or aluminum with liner: 4N'' is added between the entry ``Aluminum box 
with liner: 4B'' and the entry ``Natural wood box: 4C1''.


Sec.  173.213  [Amended]

0
51. Section 173.213 is amended as follows:
0
a. In the paragraph (b) list, the wording ``Metal box other than steel 
or aluminum: 4N'' is added between the entry ``Solid plastic box: 4H2'' 
and the entry ``Inner packagings:''.
0
b. In the paragraph (c) list, the wording ``Metal box other than steel 
or aluminum with liner: 4N'' is added between the entry ``Aluminum box 
with liner: 4B'' and the entry ``Natural wood box, sift proof: 4C2''.

0
52. In Sec.  173.219, paragraphs (b)(1), (c)(1), and (c)(5) are revised 
to read as follows:


Sec.  173.219  Life-saving appliances.

* * * * *
    (b) * * *
    (1) Division 2.2 compressed or liquefied gases must be packaged in 
cylinders in accordance with the requirements of this subchapter;
* * * * *
    (c) * * *
    (1) Division 2.2 compressed or liquefied gases must be packaged in 
cylinders in accordance with the requirements of this subchapter;
* * * * *
    (5) Life-saving appliances containing no hazardous materials other 
than cylinders of Division 2.2 compressed or liquefied gases with no 
subsidiary risk, with a capacity not exceeding 120 mL, installed solely 
for the purpose of activating the appliance, are not subject to the 
provisions of this subchapter provided they are overpacked in rigid 
outer packagings with a maximum gross mass of 40 kg. For transportation 
by aircraft, such appliances must be transported as cargo and may not 
be carried onboard an aircraft by passengers or crewmembers in carry-on 
baggage, checked baggage, or on their person unless specifically 
excepted by Sec.  175.10.

0
53. In Sec.  173.220, paragraph (d) is revised to read as follows;


Sec.  173.220  Internal combustion engines, self-propelled vehicles, 
mechanical equipment containing internal combustion engines, battery-
powered equipment or machinery, fuel cell-powered equipment or 
machinery.

* * * * *
    (d) Lithium batteries. Except as provided in Sec.  172.102, Special 
Provision A101 of this subchapter, vehicles, engines and machinery 
powered by lithium metal batteries that are transported with these 
batteries installed are forbidden aboard passenger-carrying aircraft. 
Lithium batteries contained in vehicles, engines or mechanical 
equipment must be securely fastened in the battery holder of the 
vehicle, engine or mechanical equipment and be protected in such a 
manner as to prevent damage and short circuits ( e.g., by the use of 
non-conductive caps that cover the terminals entirely). Lithium 
batteries must be of a type that have successfully passed each test in 
the UN Manual of Tests and Criteria (IBR, see Sec.  171.7 of this 
subchapter) as specified in Sec.  173.185 of this subchapter, unless 
approved by the Associate Administrator. Equipment (other than 
vehicles, engines or mechanical equipment) containing lithium 
batteries, must be described as ``Lithium ion batteries contained in 
equipment'' or ``Lithium metal batteries contained in equipment,'' as 
appropriate, and transported in accordance with Sec.  173.185 and 
applicable special provisions.
* * * * *
0
54. In Sec.  173.221, paragraph (a) is revised and paragraph (c) is 
added to read as follows:


Sec.  173.221  Polymeric beads, expandable and Plastic molding 
compound.

    (a) Non-bulk shipments of Polymeric beads (or granules), expandable 
evolving flammable vapor and Plastic molding compound in dough, sheet 
or extruded rope form, evolving flammable vapor must be packed in: 
metal (4A, 4B, or 4N), wooden (4C1 or 4C2), plywood (4D), fiberboard 
(4G), reconstituted wood (4F), plastic (4H1 or 4H2) boxes, plywood 
drums (1D) or fiber drums (1G) with sealed inner plastic liners; in 
vapor tight metal or plastic drums (1A1, 1A2, 1B1, 1B2, 1N1, 1N2, 1H1 
or 1H2); in vapor tight metal or plastic jerricans (3A1, 3A2, 3B1, 3B2, 
3H1, or 3H2); or packed in non-specification packagings when 
transported in dedicated vehicles or freight containers. The packagings 
need not conform to the requirements for package testing in part 178 of 
this subchapter, but must be capable of containing any evolving gases 
from the contents during normal conditions of transportation.
* * * * *
    (c) For transportation by vessel, the provisions of Sec.  176.907 
must be met.

0
55. In Sec.  173.225, the paragraph (c) ``Organic Peroxide Table'' and 
the paragraph (e) ``Organic Peroxide IBC Table'' are amended by adding 
the

[[Page 1090]]

entries under ``[ADD]'' and revising entries under ``[REVISE]'' in the 
appropriate alphabetical sequence to read as follows:


Sec.  173.225  Packaging requirements and other provisions for organic 
peroxides.

* * * * *
    (c) * * *

                                                                 Organic Peroxide Table
--------------------------------------------------------------------------------------------------------------------------------------------------------
                                                                          Diluent (mass %)                                   Temperature (
                                                   Concentration ---------------------------------   Water     Packing          [deg]C)
            Technical name                ID No.      (mass %)                                      (mass %)    method  ----------------------   Notes
                                                                      A          B          I                             Control   Emergency
(1)                                           (2)          (3)         (4a)       (4b)       (4c)        (5)        (6)       (7a)       (7b)        (8)
--------------------------------------------------------------------------------------------------------------------------------------------------------
[ADD]
 
                                                                      * * * * * * *
([3R- (3R, 5aS, 6S, 8aS, 9R, 10R, 12S,     UN3106        <=100    .........  .........  .........  .........        OP7  .........  .........  .........
 12aR**)]-Decahydro-10-methoxy-3, 6, 9-
 trimethyl-3, 12-epoxy-12H-pyrano [4,
 3- j]-1, 2-benzodioxepin)............
 
                                                                      * * * * * * *
3, 6, 9-Triethyl-3, 6, 9-trimethyl-1,      UN3110         <=17         >=18  .........       >=65  .........        OP8  .........  .........  .........
 4, 7-triperoxonane...................
 
                                                                      * * * * * * *
Di-(3, 5, 5-trimethylhexanoyl)             UN3119       >38-52         >=48  .........  .........  .........        OP8        +10        +15  .........
 peroxide.............................
 
                                                                      * * * * * * *
[REVISE]
 
                                                                      * * * * * * *
Diisopropyl peroxydicarbonate.........     UN3115         <=32         >=68  .........  .........  .........        OP7        -15         -5  .........
 
                                                                      * * * * * * *
Di-(3,5,5-trimethylhexanoyl) peroxide.     UN3115       >52-82         >=18  .........  .........  .........        OP7          0        +10  .........
 
                                                                      * * * * * * *
--------------------------------------------------------------------------------------------------------------------------------------------------------

* * * * *
    (e) * * *

                                           Organic Peroxide IBC Table
----------------------------------------------------------------------------------------------------------------
                                                                      Maximum
        UN No.              Organic peroxide        Type of IBC      quantity         Control        Emergency
                                                                     (liters)       temperature     temperature
----------------------------------------------------------------------------------------------------------------
                       [ADD]
 
                                                  * * * * * * *
                       Diisobutyryl peroxide,              31HA1            1000      -20 [deg]C      -10 [deg]C
                        not more than 28% as a
                        stable dispersion in
                        water.
                                                             31A            1250      -20 [deg]C      -10 [deg]C
                       Diisobutyryl peroxide,              31HA1            1000      -25 [deg]C      -15 [deg]C
                        not more than 42% as a
                        stable dispersion in
                        water.
                                                             31A            1250      -25 [deg]C      -15 [deg]C
 
                                                  * * * * * * *
                       [REVISE]
 
                                                  * * * * * * *
                       Di-(3, 5, 5-                        31HA1            1000      +10 [deg]C      +15 [deg]C
                        trimethylhexanoyl)
                        peroxide, not more than
                        52% in diluent type A.
 
                                                  * * * * * * *
                       1, 1, 3, 3-                           31A            1250       -5 [deg]C       +5 [deg]C
                        Tetramethylbutyl
                        peroxyneodecanoate, not
                        more than 52%, stable
                        dispersion, in water.
                                                           31HA1            1000       -5 [deg]C       +5 [deg]C
 
                                                  * * * * * * *
----------------------------------------------------------------------------------------------------------------

* * * * *


Sec.  173.226  [Amended]

0
56. Section 173.226 is amended as follows:
0
a. In the paragraph (c)(1) list, the wording ``Expanded plastic box: 
4H2'' is removed and the wording ``Expanded plastic box: 4H1'' is added 
in its place.
0
b. In the paragraph (c)(1) list, the wording ``Metal box other than 
steel or aluminum: 4N'' is added after the entry ``Solid plastic box: 
4H2''.

[[Page 1091]]


0
57. In Sec.  173.230, paragraphs (e)(2)(ii) and (f)(3) are revised to 
read as follows:


Sec.  173.230  Fuel cell cartridges containing hazardous material.

* * * * *
    (e) * * *
    (2) * * *
    (ii) For fuel cell cartridges contained in equipment, the entire 
fuel cell system must be protected against short circuits and 
unintentional activation. The equipment must be securely cushioned in 
the outer packaging.
    (f) * * *
    (3) For transportation aboard passenger aircraft, for fuel cell 
cartridges contained in equipment, each fuel cell system and fuel cell 
cartridge must conform to to IEC 62282-6-100 and IEC 62282-6-100 Amend. 
1 (IBR, see Sec.  171.7 of this subchapter) or a standard approved by 
the Associate Administrator;
* * * * *

0
58. In Sec.  173.240, paragraph (f) is added to read as follows:


Sec.  173.240  Bulk packaging for certain low hazard solid materials.

* * * * *
    (f) Flexible Bulk Containers. Flexible Bulk Containers are 
authorized subject to the conditions and limitations of this section 
provided the use of a Flexible Bulk Container is authorized by the 
inclusion of bulk packaging code B120 in Column (7) of the Sec.  
172.101 Hazardous Materials Table of this subchapter and the Flexible 
Bulk Container conforms to the requirements in subpart S of part 178 of 
this subchapter. Flexible Bulk Containers may not be used for Packing 
Group I or II hazardous materials.

0
59. In Sec.  173.301b, paragraphs (c)(2)(ii) and (d) are revised to 
read as follows:


Sec.  173.301b  Additional general requirements for shipment of UN 
pressure receptacles.

* * * * *
    (c) * * *
    (2) * * *
    (ii) By equipping the UN pressure receptacle with a valve cap 
conforming to the requirements in ISO 11117 and Technical Corrigendum 1 
(IBR, see Sec.  171.7 of this subchapter). The cap must have vent-holes 
of sufficient cross-sectional area to evacuate the gas if leakage 
occurs at the valve;
    * * *
    (d) Non-refillable UN pressure receptacles. (1) When the use of a 
valve is prescribed, the valve must conform to the requirements in ISO 
13340 (IBR, see Sec.  171.7 of this subchapter).
    (2) The receptacles must be transported as an inner package of a 
combination package;
    (3) The receptacle must have a water capacity not exceeding 1.25 L 
when used for a flammable or toxic gas or 50 liters for receptacles 
used to contain chemical under pressure; and
    (4) The receptacle is prohibited for Hazard Zone A material.
* * * * *

0
60. In Sec.  173.302a, paragraph (a)(3) is revised to read as follows


Sec.  173.302a  Additional requirements for shipment of nonliquefied 
(permanent) compressed gases in specification cylinders.

    (a) * * *
    (3) DOT 39 DOT 39 cylinders. When the cylinder is filled with a 
Division 2.1 material, the internal volume of the cylinder may not 
exceed 1.23 L (75 in\3\) or 50 L (3050 in\3\) for chemical under 
pressure.
* * * * *

0
61. In Sec.  173.306, paragraph (j) is revised to read as follows:


Sec.  173.306  Limited quantities of compressed gases.

* * * * *
    (j) Aerosols and receptacles small, containing gas with a capacity 
of less than 50 mL. Aerosols, as defined in Sec.  171.8 of this 
subchapter, and receptacles, small, containing gas, with a capacity not 
exceeding 50 mL (1.7 fluid oz.) and with a pressure not exceeding 970 
kPa (141 psig) at 55 [deg]C (131 [deg]F), containing no hazardous 
materials other than a Division 2.2 gas, are not subject to the 
requirements of this subchapter except that for transport by aircraft, 
such aerosols and receptacles must be transported as cargo and may not 
be carried onboard an aircraft by passengers or crewmembers in carry-on 
baggage, checked baggage, or on their person unless specifically 
excepted by Sec.  175.10. The pressure limit may be increased to 2,000 
kPa (290 psig) at 55 [deg]C (131 [deg]F) provided the aerosols are 
transported in outer packages that conform to the packaging 
requirements of Subpart B of this part. This paragraph (j) does not 
apply to a self-defense spray (e.g., pepper spray).
* * * * *

0
62. In Sec.  173.313:
0
a. The section heading is revised;
0
b. The introductory text is revised;
0
c. The table name is revised;
0
d. In the table, the entry for UN3220 is revised; and
0
e. In the table, entries are added for UN3500, UN3501, UN3502, UN3503, 
UN3504 and UN3505.
    The revisions and additions are to read as follows:


Sec.  173.313  UN Portable Tank Table for Liquefied Compressed Gases 
and Chemical Under Pressure.

    The UN Portable Tank Table for Liquefied Compressed Gases and 
chemical under pressure is referenced in Sec.  172.102(c)(7)(iii) of 
this subchapter for portable tanks that are used to transport liquefied 
compressed gases and chemicals under pressure. The table applies to 
each liquefied compressed gas and chemical under pressure that are 
identified with Special Provision T50 in Column (7) of the Sec.  
172.101 Hazardous Materials Table. In addition to providing the UN 
identification number and proper shipping name, the table provides 
maximum allowable working pressures, bottom opening requirements, 
pressure relief device requirements, and degree of filling requirements 
for liquefied compressed gas and chemical under pressure permitted for 
transportation in a T50 portable tank. In the minimum test pressure 
column, ``small'' means a portable tank with a diameter of 1.5 meters 
or less when measured at the widest part of the shell, ``sunshield'' 
means a portable tank with a shield covering at least the upper third 
of the shell, ``bare'' means no sunshield or insulation is provided, 
and ``insulated'' means a complete cladding of sufficient thickness of 
insulating material necessary to provide a minimum conductance of not 
more than 0.67 w/m\2\/k. In the pressure relief requirements column, 
the word ``Normal'' denotes that a frangible disc as specified in Sec.  
178.276(e)(3) of this subchapter is not required.

[[Page 1092]]



               UN Portable Tank Table for Liquefied Compressed Gases and Chemicals Under Pressure
----------------------------------------------------------------------------------------------------------------
                                 Minimum design
              Non-refrigerated   pressure (bar)                             Pressure relief
   UN No.         liquefied       small; bare;    Openings below liquid    requirements  (See    Maximum filling
              compressed gases     sunshield;             level            Sec.   178.276(e))    density  (kg/l)
                                    insulated
----------------------------------------------------------------------------------------------------------------
 
                                                  * * * * * * *
3220........  Pentafluoroethan  34.4............  Allowed..............  Normal...............  0.87
               e or             30.8............
               Refrigerant gas  27.5............
               R 125.           24.5............
 
                                                  * * * * * * *
3500........  Chemical under    See MAWP          Allowed..............  Sec.   178.276(e)(3).  See TP4 in Sec.
               pressure, n.o.s.  definition in                                                    172.102(c)
                                 Sec.
                                 178.276(a).
3501........  Chemical under    See MAWP          Allowed..............  Sec.   178.276(e)(3).  See TP4 in Sec.
               pressure,         definition in                                                    172.102(c)
               flammable,        Sec.
               n.o.s.            178.276(a).
3502........  Chemical under    See MAWP          Allowed..............  Sec.   178.276(e)(3).  See TP4 in Sec.
               pressure,         definition in                                                    172.102(c)
               toxic, n.o.s.     Sec.
                                 178.276(a).
3503........  Chemical under    See MAWP          Allowed..............  Sec.   178.276(e)(3).  See TP4 in Sec.
               pressure,         definition in                                                    172.102(c)
               corrosive,        Sec.
               n.o.s.            178.276(a).
3504........  Chemical under    See MAWP          Allowed..............  Sec.   178.276(e)(3).  See TP4 in Sec.
               pressure,         definition in                                                    172.102(c)
               flammable,        Sec.
               toxic, n.o.s.     178.276(a).
3505........  Chemical under    See MAWP          Allowed..............  Sec.   178.276(e)(3).  See TP4 in Sec.
               pressure,         definition in                                                    172.102(c)
               flammable,        Sec.
               corrosive,        178.276(a).
               n.o.s.
----------------------------------------------------------------------------------------------------------------


0
63. In Sec.  173.316, paragraph (a)(8) is redesignated as paragraph 
(a)(9) and a new paragraph (a)(8) is added to read as follows:


Sec.  173.316  Cryogenic liquids in cylinders.

    (a) * * *
    (8) All pressure relief device inlets must under maximum filling 
conditions be situated in the vapor space of the closed cryogenic 
receptacle and the devices must be arranged to ensure that the escaping 
vapor is discharged unobstructed.
* * * * *

0
64. In Sec.  173.318, paragraph (b)(7)(vi) is added to read as follows:


Sec.  173.318  Cryogenic liquids in cargo tanks.

    (b) * * *
    (7) * * *
    (vi) All pressure relief device inlets must under maximum filling 
conditions be situated in the vapor space of the closed cryogenic 
receptacle and the devices must be arranged to ensure that the escaping 
vapor is discharged unobstructed.
* * * * *

0
65. Section 173.335 is added to read as follows:


Sec.  173.335  Chemical under pressure n.o.s.

    (a) General requirements. A cylinder filled with a chemical under 
pressure must be offered for transportation in accordance with the 
requirements of this section and Sec.  172.301. In addition, a DOT 
specification cylinder must meet the requirements in Sec. Sec.  
173.301a, 173.302, 173.302a, and 173.305, as applicable. UN pressure 
receptacles must meet the requirements in Sec. Sec.  173.301b and 
173.302b, as applicable. Where more than one section applies to a 
cylinder, the most restrictive requirements must be followed.
    (b) Filling limits. Cylinders must be filled so that at 50 [deg]C 
(122 [deg]F) the non-gaseous phase does not exceed 95% of their water 
capacity and they are not completely filled at 60 [deg]C (140 [deg]F). 
When filled, the internal pressure at 65 [deg]C (149 [deg]F) must not 
exceed the test pressure of the cylinder. The vapor pressures and 
volumetric expansion of all substances in the cylinders must be taken 
into account.
    (c) Minimum service pressure. The minimum service pressure must be 
in accordance with the design specifications of part 178 of this 
subchapter for the propellant. In any case the minimum test pressure 
must not be less than 20 bar.
    (d) Periodic inspection. The maximum requalification test period 
for cylinders transporting chemical under pressure n.o.s. is 5 years.

0
66. In Sec.  173.340, paragraphs (c)(1), (c)(2), and (d) are revised to 
read as follows:


Sec.  173.340  Tear gas devices.

* * * * *
    (c) * * *
    (1) In UN 4A, 4B, or 4N metal boxes or UN 4C1, 4C2, 4D, or 4F 
metal-strapped wooden boxes. Functioning elements not assembled in 
grenades or devices must be in a separate compartment of these boxes, 
or in inner or separate outer boxes, UN 4C1, 4C2, 4D, or 4F, and must 
be packed and cushioned so that they may not come in contact with each 
other or with the walls of the box during transportation. Not more than 
50 tear gas devices and 50 functioning elements must be packed in one 
box, and the gross weight of the outer box may not exceed 35 kg (77 
pounds).
    (2) In UN 1A2, 1B2, 1N2 or 1H2 drums. Functioning elements must be 
packed in a separate inner packaging or compartment. Not more than 24 
tear gas devices and 24 functioning elements must be packed in one 
outer drum, and the gross weight of the drum may not exceed 35 kg (77 
pounds).
* * * * *
    (d) Tear gas devices may be shipped completely assembled when 
offered by or consigned to the U.S. Department of Defense, provided the 
functioning elements are packed so that they cannot accidentally 
function. Outer packagings must be UN 4A, 4B, or 4N metal boxes or UN 
4C1, 4C2, 4D, or 4F metal-strapped wooden boxes.

PART 175--CARRIAGE BY AIRCRAFT

0
67. The authority citation for part 175 continues to read as follows:

    Authority: 49 U.S.C. 5101-5128; 44701; 49 CFR 1.45 and 1.53.


0
68. In Sec.  175.8, paragraph (b)(3) is revised to read as follows:


Sec.  175.8  Exceptions for operator equipment and items of 
replacement.

    (b) * * *

[[Page 1093]]

    (3) Aerosols of Division 2.2 only (for dispensing of food 
products), alcoholic beverages, colognes, liquefied gas lighters, 
perfumes, and portable electronic devices containing lithium cells or 
batteries that meet the requirements of Sec.  175.10(a)(18) carried 
aboard a passenger-carrying aircraft by the operator for use or sale on 
that specific aircraft. A liquefied gas lighter design must be examined 
and successfully tested by a person or agency authorized by the 
Associate Administrator.
* * * * *

0
69. In Sec.  175.10:
0
a. Paragraphs (a)(14) and (15) and paragraph (a)(18) introductory text 
are revised;
0
b. Paragraph (a)(18)(iii) is added;
0
c. Paragraphs (a)(19)(vii) and (viii) are revised; and
0
d. Paragraphs (a)(20) through (24) are added.
    The revisions and additions read as follows:


Sec.  175.10  Exceptions for passengers, crewmembers, and air 
operators.

    (a) * * *
    (14) Electrically powered heat-producing articles (e.g., battery-
operated equipment such as diving lamps and soldering equipment) as 
checked or carry-on baggage only and with the approval of the operator 
of the aircraft. The heat-producing component, the energy source, or 
other component (e.g., fuse) must be removed to prevent unintentional 
functioning during transport. Any battery that is removed must be 
protected against short circuit by placement in original retail 
packaging or by otherwise insulating terminals (e.g., by taping over 
exposed terminals or placing each battery in a separate plastic bag or 
protective pouch).
    (15) A wheelchair or other battery-powered mobility aid equipped 
with a nonspillable battery or a dry sealed battery when carried as 
checked baggage, provided--
    (i) The battery conforms to the requirements of Sec.  173.159a(d) 
of this subchapter for non-spillable batteries;
    (ii) The battery conforms to the requirements of Sec.  
172.102(c)(1), Special provision 130 of this subchapter for dry sealed 
batteries, as applicable;
    (iii) Visual inspection including removal of the battery, where 
necessary, reveals no obvious defects (removal of the battery from the 
housing should be performed by qualified airline personnel only);
    (iv) The battery is disconnected and the battery terminals are 
protected to prevent short circuits, unless the wheelchair or mobility 
aid design provides an effective means of preventing unintentional 
activation, and
    (v) The battery is--
    (A) Securely attached to the wheelchair or mobility aid;
    (B) Is removed and placed in a strong, rigid packaging marked 
``NONSPILLABLE BATTERY'' (unless fully enclosed in a rigid housing that 
is properly marked);
    (C) Is removed and placed in a strong, rigid packaging marked with 
the words ``not restricted'' in accordance with paragraph (c)(2) of 
Sec.  172.102(c)(1), Special provision 130, of this subchapter; or
    (D) Is handled in accordance with paragraph (a)(16)(iv) of this 
section.
* * * * *
    (18) Except as provided in Sec.  173.21 of this subchapter, 
portable electronic devices (for example, watches, calculating 
machines, cameras, cellular phones, lap-top and notebook computers, 
camcorders, etc.) containing cells or batteries (including lithium 
cells or batteries) and spare batteries and cells for these devices, 
when carried by passengers or crew members for personal use. Each spare 
battery must be individually protected so as to prevent short circuits 
(by placement in original retail packaging or by otherwise insulating 
terminals, e.g., by taping over exposed terminals or placing each 
battery in a separate plastic bag or protective pouch) and carried in 
carry-on baggage only. In addition, each installed or spare battery 
must comply with the following: * * *
    (iii) For a non-spillable battery, the battery and equipment must 
conform to Sec.  173.159(d). Each battery must not exceed a voltage 
greater than 12 volts and a watt-hour rating of not more than 100 Wh. 
No more than two individually protected spare batteries may be carried. 
Such equipment and spare batteries must be carried in checked or carry-
on baggage.
    (19) * * *
    (vii) Each fuel cell and fuel cell cartridge must conform to IEC 
62282-6-100 and Amend. 1 (IBR; see Sec.  171.7 of this subchapter) and 
must be marked with a manufacturer's certification that it conforms to 
the specification. In addition, each fuel cell cartridge must be marked 
with the maximum quantity and type of fuel in the cartridge;
    (viii) Interaction between fuel cells and integrated batteries in a 
device must conform to IEC/PAS 62282-6-100 and Amend. 1 (IBR, see Sec.  
171.7 of this subchapter). Fuel cells whose sole function is to charge 
a battery in the device are not permitted; and * * *
    (20) Permeation devices for calibrating air quality monitoring 
equipment when carried in checked baggage provided the devices are 
constructed and packaged in accordance with Sec.  173.175.
    (21) An internal combustion or fuel cell engine or a machine or 
apparatus containing an internal combustion or fuel cell engine when 
carried as checked baggage, provided--
    (i) The engine contains no liquid or gaseous fuel. An engine may be 
considered as not containing fuel when the engine components and any 
fuel lines have been completed drained, sufficiently cleaned of 
residue, and purged of vapors to remove any potential hazard and the 
engine when held in any orientation will not release any liquid fuel;
    (ii) The fuel tank contains no liquid or gaseous fuel. A fuel tank 
may be considered as not containing fuel when the fuel tank and the 
fuel lines have been completed drained, sufficiently cleaned of 
residue, and purged of vapors to remove any potential hazard;
    (ii) It is not equipped with a wet battery (including a non-
spillable battery), a sodium battery or a lithium battery; and
    (iv) It contains no other hazardous materials subject to the 
requirements of this subchapter.
    (22) Non-infectious specimens transported in accordance with Sec.  
173.4b(b).
    (23) Insulated packagings containing refrigerated liquid nitrogen 
when carried in checked or carry-on baggage in accordance with the ICAO 
Technical Instructions (IBR, see Sec.  171.7 of this subchapter), 
Packing Instruction 202, the packaging specifications in part 6, 
chapter 5, and special provision A152.
    (24) Small cartridges fitted into devices with no more than four 
small cylinders of carbon dioxide or other suitable gas in in Division 
2.2. The water capacity of each cylinder must not exceed 50 mL 
(equivalent to a 2.8 g carbon dioxide cartridge), with the approval of 
the operator.
* * * * *

PART 176--CARRIAGE BY VESSEL

0
70. The authority citation for part 176 continues to read as follows:

    Authority:  49 U.S.C. 5101-5128; 49 CFR 1.53.


0
71. In Sec.  176.2, definitions for Closed cargo transport unit for 
Class 1 (explosive) materials, Potential or possible sources of 
ignition, and Protected from sources of heat are added in alphabetical 
order to read as follows:

[[Page 1094]]

Sec.  176.2  Definitions.

* * * * *
    Closed cargo transport unit for Class 1 (explosive) materials means 
a freight container or transport vehicle that fully encloses the 
contents by permanent structures and can be secured to the ship's 
structure and are, except for the carriage of division 1.4 explosives, 
structurally serviceable (see Sec.  176.172). Portable magazines 
conforming to Sec.  176.137 are also considered closed cargo transport 
units for Class 1. Small compartments such as deck houses and mast 
lockers are included. Cargo transport units with fabric sides or tops 
are not closed cargo transport units. The floor of any closed cargo 
transport unit must either be constructed of wood, close-boarded or so 
arranged that goods are stowed on sparred gratings, wooden pallets or 
dunnage.
* * * * *
    Potential or possible sources of ignition means, but is not limited 
to, open fires, machinery exhausts, galley uptakes, electrical outlets 
and electrical equipment including those on refrigerated or heated 
cargo transport units unless they are of a type designed to operate in 
a hazardous environment.
* * * * *
    Protected from sources of heat means that packages and cargo 
transport units must be stowed at least 2.4 m from heated ship 
structures, where the surface temperature is liable to exceed 131[deg]F 
(55[deg]C). Examples of heated structures are steam pipes, heating 
coils, top or side walls of heated fuel and cargo tanks, and bulkheads 
of machinery spaces. In addition, packages not loaded inside a cargo 
transport unit and stowed on deck must be shaded from direct sunlight. 
The surface of a cargo transport unit can heat rapidly when in direct 
sunlight in nearly windless conditions and the cargo may also become 
heated. Depending on the nature of the goods in the cargo transport 
unit, and the planned voyage, precautions must be taken to ensure that 
exposure to direct sunlight is reduced.
* * * * *

0
72. In Sec.  176.63, paragraphs (a), (b), and (e) are revised to read 
as follows:


Sec.  176.63  Stowage locations.

    (a) The table in Sec.  172.101 of this subchapter specifies 
generally the locations authorized for stowage of the various hazardous 
materials on board vessels. This part prescribes additional 
requirements with respect to the stowage of specific hazardous 
materials in addition to those authorized in Sec.  172.101 of this 
subchapter. This section sets forth the basic physical requirements for 
the authorized locations. Hazardous materials offered for transport as 
limited quantities are allocated stowage category A and are not subject 
to any of the specific stowage requirements indicated in column 10B in 
Sec.  172.101 of this subchapter for the material being transported.
    (b) To qualify as ``on deck'' stowage, the location must be on the 
weather deck. If the location is in a house on the weather deck, the 
location must have a permanent structural opening to the atmosphere, 
such as a door, hatch, companionway or manhole, and must be vented to 
the atmosphere. The location may not have any structural opening to any 
living quarters, cargo, or other compartment unless the opening has 
means for being closed off and secured. Any deck house containing 
living quarters, a steering engine, a refrigerating unit, a 
refrigerated stowage box, or a heating unit may not be used unless that 
area is isolated from the cargo stowage area by a permanent, and tight, 
metallic bulkhead. Stowage in a shelter or 'tween deck is not 
considered to be ``on deck''. A barge that is vented to the atmosphere 
and is stowed on deck on a barge-carrying ship is considered to be ``on 
deck''. When an entry in Sec.  172.101 of this subchapter requires 
``on-deck'' stowage and is qualified by the requirement ``protected 
from sources of heat'', the stowage must be protected from the direct 
rays of the sun by means of structural erections or awnings except that 
such protection is not required for shipment in portable tanks.
* * * * *
    (e) Notwithstanding the stowage provisions given in the table in 
Sec.  172.101 of this subchapter, empty packages containing residue, 
including IBCs and large packages, may be stowed ``on deck'' or ``under 
deck'' in a mechanically ventilated cargo space. However, empty 
pressure receptacles containing residue that carry a label of class 2.3 
must be stowed ``on deck'' and waste aerosols must be stowed in 
accordance with the table in Sec.  172.101 of this subchapter.
* * * * *

0
73. In Sec.  176.76, paragraph (a)(11) is added to read as follows:


Sec.  176.76  Transport vehicles, freight containers, and portable 
tanks containing hazardous materials.

    (a) * * *
    (11) When packages are secured with banding or straps, these 
restraints must not be over-tightened to cause damage or deformation of 
the packages or the securing points (such as D-rings) within the 
freight container or transport vehicle.
* * * * *

0
74. In Sec.  176.83 paragraphs (m)(1) through (3) are revised to read 
as follows:


Sec.  176.83  Segregation.

* * * * *
    (m) * * *
    (1) For the purpose of segregation, materials having certain 
similar chemical properties have been grouped together in segregation 
groups. The segregation groups (such as ``acids'', ``chlorates'', 
``permanganates'') and the entries allocated to each of these groups 
include the substances identified in section 3.1.4 of the IMDG Code 
(IBR, see Sec.  171.7 of this subchapter). When column (10B) of the 
Sec.  172.101 Table refers to a numbered stowage provision set forth in 
Sec.  176.84(b) such as ``Stow `away from' acids'', that particular 
stowage/segregation requirement applies to all the materials allocated 
to the respective segregation group.
    (2) Not all hazardous materials falling within a segregation group 
are listed by name in the regulations. These materials are shipped 
under ``n.o.s.'' entries. Although these ``n.o.s.'' entries are not 
listed themselves in the above groups, the person who offers a 
hazardous material for transportation must decide whether allocation 
under a segregation group is appropriate.
    (3) The segregation groups described above do not address materials 
that fall outside the classification criteria of the hazardous 
materials regulations, although it is recognized that some non-
hazardous materials have certain chemical properties similar to 
hazardous materials listed in the segregation groups. A person who 
offers a hazardous material for transportation or the person 
responsible for packing the materials into a cargo transport unit who 
does have knowledge of the chemical properties of such non-hazardous 
materials may identify a relevant segregation group and apply the 
segregation requirements for that segregation group.

0
75. In Sec.  176.84:
0
a. Paragraph (a) is revised;
0
b. In the table of provisions in paragraph (b), Stowage provisions 19, 
48, and 50 are removed and Stowage provisions 25 and 128 are revised; 
and
0
c. In paragraph (c)(2), stowage provisions 7E, 8E and 20E are removed, 
and Stowage provision 26E is revised.
    The revisions read as follows:

[[Page 1095]]

Sec.  176.84  Other requirements for stowage and segregation for cargo 
vessels and passenger vessels.

    (a) General. When Column 10B of the Sec.  172.101 Table refers to a 
numbered or alpha-numeric stowage provision for water shipments, the 
meaning and requirements of that provision are set forth in this 
section. Terms in quotation marks are defined in Sec.  176.83. Other 
terms used in the table in this section such as ``acids'', 
``chlorates'' and ``permanganates'' indicate different chemical groups 
referred to here as segregation groups. Materials falling within a 
segregation group are considered to have certain similar chemical 
properties and, although not exhaustive in nature, the materials 
belonging to each group include those substances identified in section 
3.1.4 of the IMDG Code (IBR, see Sec.  171.7 of this subchapter) as set 
forth in Sec.  176.83(m).
    (b) Table of provisions:

------------------------------------------------------------------------
               Code                              Provisions
------------------------------------------------------------------------
 
                                * * * * *
25................................  Protected from sources of heat
 
                                * * * * *
128...............................  Stow in accordance with the IMDG
                                     Code, Sub-section 7.6.2.7.2
                                     (incorporated by reference; see
                                     Sec.   171.7 of this subchapter).
 
                                * * * * *
------------------------------------------------------------------------

* * * * *
    (c) * * *

------------------------------------------------------------------------
               Notes                             Provisions
------------------------------------------------------------------------
 
                                * * * * *
26E...............................  For closed cargo transport units, a
                                     non-metallic lining is required
                                     when not in effectively sealed,
                                     sift-proof packages.
 
                                * * * * *
------------------------------------------------------------------------


0
76. In Sec.  176.116, paragraph (a) is revised and (f) is removed and 
reserved.


Sec.  176.116  General stowage conditions for class 1 (explosive) 
materials.

* * * * *
    (a) Stowage Location: (1) Class 1 (explosive) materials must be 
stowed in a cool part of the ship and must be kept as cool as 
practicable while on board. Class 1 (explosives) must be stowed as far 
away as practicable from any potential source of heat or ignition.
    (2) With the exception of division 1.4 (explosive) materials, Class 
1 (explosive) materials may not be positioned closer to the ship's side 
than a distance equal to one eighth of the beam or 2.4 m (8 feet), 
whichever is less.
    (3) Except where the consignment of Class 1 (explosive) materials 
consists only of explosive articles, the wearing of shoes or boots with 
unprotected metal nails, heels, or tips of any kind is prohibited.
* * * * *


Sec.  176.128  [Removed and Reserved]

0
77. Remove and reserve Sec.  176.128.


Sec.  176.130  [Removed and Reserved]

0
78. Remove and reserve Sec.  176.130.


Sec.  176.133  [Removed and Reserved]

0
79. Remove and reserve Sec.  176.133.


Sec.  176.134  [Removed and Reserved]

0
80. Remove and reserve Sec.  176.134.


Sec.  176.136  [Removed and Reserved]

0
81. Remove and reserve Sec.  176.136.

0
82. In Sec.  176.138, paragraph (b) is revised to read as follows:


Sec.  176.138  Deck stowage.

* * * * *
    (b) Class 1 (explosives) may not be stowed within a horizontal 
distance of 6 m (20 feet) from any source of heat and any possible 
sources of ignition. With the exception of division 1.4 (explosive) 
materials, Class 1 (explosives) materials may not be stowed within a 
horizontal distance of 12 m (39 feet) from the bridge, accommodation 
areas, and lifesaving appliances.
* * * * *

0
83. In Sec.  176.144:
0
a. Note 1 in Table (a) is revised; and
0
b. Paragraph (d) is revised.
    The revisions read as follows:


Sec.  176.144  Segregation of Class 1 (explosive) materials.

* * * * *
    (a) * * *

    Notes: 1. Explosive articles in compatibility group G, other 
than fireworks, may be stowed with articles of compatibility groups 
C, D, and E, provided no explosive substances are carried in the 
same compartment, magazine or cargo transport unit.

* * * * *
    (d) If some of the Class 1 (explosive) materials in a stowage 
mixture require non-metallic lining of the closed cargo transport unit, 
Class 1 (explosive) materials requiring ordinary stowage may be stowed 
in the same closed cargo transport. When a closed cargo transport unit 
is used for such substances that require non-metallic lining of the 
closed cargo transport unit, the other Class 1 (explosive) materials 
stowed therein must have no exposed parts of any ferrous metal or 
aluminum alloy, unless separated by a partition.
* * * * *

0
84. In Sec.  176.146, paragraphs (a) and (b) are revised and paragraph 
(c) is removed and reserved.
    The revisions read as follows:


Sec.  176.146  Segregation from non-hazardous materials.

    (a) Except as required by paragraph (b) of this section, Class 1 
(explosive) materials need not be segregated from other cargo of a non-
dangerous nature.
    (b) Readily combustible materials may not be stowed in the same 
compartment or hold as Class 1 (explosive) materials other than those 
in compatibility group S.
* * * * *

0
85. In Sec.  176.170, paragraph (a) is revised and paragraph (c) is 
removed and resereved.
    The revision reads as follows:


Sec.  176.170  Transport of Class 1 (explosive) materials in freight 
containers.

    (a) When Class 1 (explosive) materials are stowed in a freight 
container, the freight container, for the purposes of this subpart, may 
be regarded as a closed transport unit for class 1 or a magazine but 
not a separate compartment.
* * * * *

0
86. In Sec.  176.200, paragraph (c) is revised to read as follows:


Sec.  176.200  General stowage requirements.

* * * * *
    (c) When cylinders of Class 2 (compressed gas) materials being 
transported by vessel are stowed in a vertical position they must be 
stowed in a block and cribbed or boxed-in with suitable sound lumber 
and the box or crib dunnaged to provide clearance from a steel deck at 
least 10 cm (3.9 inches) off any metal deck. Pressure receptacles in 
the box or crib must be braced to prevent any shifting of the pressure 
receptacles. The box or crib (gas rack) must be securely chocked and 
lashed to prevent movement in any direction.
* * * * *

0
87. Section 176.210 is revised to read as follows:


Sec.  176.210  On deck stowage requirements.

    Cylinders of Class 2 (compressed gas) materials being transported 
by vessel must be protected from sources of heat. A tarpaulin covering 
the cylinders is not acceptable if it comes in contact with them.

[[Page 1096]]


0
88. Section 176.230 is revised to read as follows:


Sec.  176.230  Stowage of Division 2.1 (flammable gas) materials.

    Division 2.1 (flammable gas) materials transported in Specification 
106A or 110A multi-unit car tanks must be stowed on deck only, and must 
be protected from sources of heat.

0
89. In Sec.  176.305, paragraph (a) is revised to read as follows:


Sec.  176.305  General stowage requirements.

    (a) A Class 3 (flammable) or combustible liquid must be kept as 
cool as reasonably practicable, protected from sources of heat, and 
away from potential sources of ignition.
* * * * *

0
90. In Sec.  176.400, paragraphs (a) and (b) are revised to read as 
follows:


Sec.  176.400  Stowage of Division 1.5, Class 4 (flammable solids) and 
Class 5 (oxidizers and organic peroxides) materials.

    (a) Class 4 (flammable solid) material and Division 5.2 (organic 
peroxide) material must be kept as cool as reasonably practicable, 
protected from sources of heat, and away from potential sources of 
ignition.
    (b) Division 5.2 (organic peroxide) material must be stowed away 
from living quarters or access to them. Division 5.2 (organic peroxide) 
material not requiring temperature control must be protected from 
sources of heat, including radiant heat and strong sunlight, and must 
be stowed in a cool, well-ventilated area.
* * * * *

0
91. In Sec.  176.600, paragraph (d) is revised to read as follows:


Sec.  176.600  General stowage requirements.

* * * * *
    (d) Each package of Division 2.3 (poisonous gas) material or 
Division 6.1 (poison) material that also bears a FLAMMABLE LIQUID or 
FLAMMABLE GAS label must be stowed in a mechanically ventilated space, 
kept as cool as reasonably practicable, and be protected from sources 
of heat and stowed away from potential sources of ignition.

0
92. The heading for Subpart O is revised to read as follows:

Subpart O--Detailed Requirements for Cotton and Vegetable Fibers, 
Motor Vehicles, Polymeric Beads, and Plastic Molding Compounds

0
93. Section 176.907 is added to read as follows:


Sec.  176.907  Polymeric Beads and Plastic Molding Compounds.

    (a) When transported in cargo transport units, the cargo transport 
units must provide an adequate exchange of air in the unit. This 
adequate exchange of air may be accomplished by utilizing a ventilated 
container, an open-top container, or a container in one door off 
operation. When cargo transport units with venting devices are used 
these devices should be kept clear and operable. If mechanical devices 
are used for ventilation, they must be explosion-proof.
    (b) As an alternative to the options presented in paragraph (a) of 
this section to ensure an adequate exchange of air; a refrigerated 
cargo transport unit may be used.
    (c) The requirements in paragraph (a) and (b) of this section do 
not apply if the hazardous material is:
    (1) Packed in hermetically sealed packagings or IBC's which conform 
to packing group II performance level for liquid dangerous goods with a 
total pressure in the packaging (i.e., the vapor pressure of the 
material plus the partial pressure of air or other inert gases, less 
100kPa (15 psia)) at 55 [deg]C (131 [deg]F), determined on the basis of 
the hazardous material not completely filling the receptacle at a 
temperature of 55 [deg]C (131 [deg]C) or less at a filling temperature 
of 15 [deg] C (59 [deg]F), will not exceed two-thirds of the marked 
test pressure.
    (2) [Reserved]
    (d) Cargo transport units must be marked with a warning mark 
including the words ``CAUTION--MAY CONTAIN FLAMMABLE VAPOR'' or 
``CAUTION--MAY CONTAIN FLAMMABLE VAPOUR'' with lettering having a 
height of at least 25 mm (1 inch). The mark must be affixed to each 
access point in a location where it will be easily seen by persons 
prior to opening or entering the cargo transport unit and must remain 
on the cargo transport unit until the following provisions are met:
    (1) The cargo transport unit has been completely ventilated to 
remove any hazardous concentrations of vapor or gas;
    (2) The immediate vicinity of the cargo transport unit is clear of 
any source of ignition; and
    (3) The hazardous materials have been unloaded.

PART 178--SPECIFICATIONS FOR PACKAGINGS

0
94. The authority citation for part 178 continues to read as follows:

    Authority: 49 U.S.C. 5101-5128; 49 CFR 1.53.


0
95. In Sec.  178.71, paragraph (d)(2) is revised to read as follows:
* * * * *
    (d) * * *
    (2) Service equipment must be configured or designed to prevent 
damage that could result in the release of the pressure receptacle 
contents during normal conditions of handling and transport. Manifold 
piping leading to shut-off valves must be sufficiently flexible to 
protect the valves and the piping from shearing or releasing the 
pressure receptacle contents. The filling and discharge valves and any 
protective caps must be secured against unintended opening. The valves 
must conform to ISO 10297 (IBR, see Sec.  171.7 of this subchapter), or 
ISO 13340 (IBR, see Sec.  171.7 of this subchapter) for non-refillable 
pressure receptacles, and be protected as specified in Sec.  
173.301b(f) of this subchapter.
* * * * *

0
96. In Sec.  178.274:
0
a. In paragraph (f)(1)(v), the second sentence is revised;
0
b. Paragraph (f)(1)(vi) is redesignated as paragraph (f)(1)(vii); and
0
c.New paragraph (f)(1)(vi) is added.
    The addition and revisions read as follows:


Sec.  178.274  Specifications for UN portable tanks.

* * * * *
    (f) * * *
    (1) * * *
    (v) * * * For spring loaded pressure relief devices, the rated flow 
capacity must be determined according to ISO 4126-1 (including 
Technical Corrigendum 1) and ISO 4126-7 (IBR, see Sec.  171.7 of this 
subchapter);
    (vi) The cross sectional flow areas of the spring loaded pressure 
relief devices, frangible discs, and fusible elements in mm\2\; and
* * * * *

0
97. In Sec.  178.512, the section heading, paragraph (a), and paragraph 
(b) introductory text are revised to read as follows:


Sec.  178.512  Standards for steel, aluminum or other metal boxes.

    (a) The following are identification codes for steel, aluminum, or 
other metal boxes:
    (1) 4A for a steel box;
    (2) 4B for an aluminum box; and
    (3) 4N for an other metal box.
    (b) Construction requirements for steel, aluminum or other metal 
boxes are as follows:
* * * * *

[[Page 1097]]


0
98. In Sec.  178.603, revise the second entry in the table in paragraph 
(a) and revise paragraph (b) to read as follows:


Sec.  178.603  Drop test.

    (a) * * *

------------------------------------------------------------------------
                                 Number of tests    Drop orientation of
           Packaging                (samples)             samples
------------------------------------------------------------------------
 
                              * * * * * * *
Boxes of natural wood, Plywood  Five--(one for     First drop: Flat on
 boxes, Reconstituted wood       each drop).        the bottom (using
 boxes, Fiberboard boxes,                           the first sample).
 Plastic boxes, Steel,                              Second drop: Flat on
 aluminum or other metal                            the top (using the
 boxes, Composite packagings                        second sample).
 that are in the shape of a                         Third drop: Flat on
 box.                                               the long side (using
                                                    the third sample).
                                                    Fourth drop: Flat on
                                                    the short side
                                                    (using the fourth
                                                    sample). Fifth drop:
                                                    On a corner (using
                                                    the fifth sample).
 
                              * * * * * * *
------------------------------------------------------------------------

     (b) Exceptions. For testing of single or composite packagings 
constructed of stainless steel, nickel, or monel at periodic intervals 
only (i.e., other than design qualification testing), the drop test may 
be conducted with two samples, one sample each for the two drop 
orientations. These samples may have been previously used for the 
hydrostatic pressure or stacking test. Exceptions for the number of 
steel, aluminum and other metal packaging samples used for conducting 
the drop test are subject to the approval of the Associate 
Administrator.
* * * * *

0
99. In Sec.  178.705, paragraph (a)(3) is revised to read as follows:


Sec.  178.705  Standards for metal IBCs.

    (a) * * *
    (3) 31A, 31B, 31N for liquids.
* * * * *

0
100. In Sec.  178.910, paragraph (a)(1) introductory text is revised 
and paragraph (b) is added to read as follows:


Sec.  178.910  Marking of Large Packagings.

    (a) * * *
    (1) Mark every Large Packaging in a durable and clearly visible 
manner. The marking may be applied in a single line or in multiple 
lines provided the correct sequence is followed with the information 
required by this section, in letters, numerals, and symbols of at least 
12 mm in height. This minimum marking size requirement applies only to 
large packages manufactured after January 1, 2014. The following 
information is required in the sequence presented:
* * * * *
    (b) All Large Packages manufactured, repaired or remanufactured 
after January 1, 2015 must be marked with the symbol applicable to a 
Large Package designed for stacking or not designed for stacking, as 
appropriate. The symbol must be not less than 100 mm by 100 mm as 
follows:
[GRAPHIC] [TIFF OMITTED] TR07JA13.001


0
101. In Sec.  178.980, paragraphs (e)(2) and (3) are redesignated as 
paragraphs (e)(3) and (4), respectively, and a new paragraph (e)(2) is 
added to read as follows:


Sec.  178.980  Stacking test.

* * * * *
    (e) * * *
    (2) For fiberboard or wooden Large Packagings, there may be no loss 
of contents and no permanent deformation that renders the whole Large 
Packaging, including the base pallet, unsafe for transportation.
* * * * *

0
102. Subpart R is added to read as follows:

Subpart R--Flexible Bulk Container Standards

Sec.
178.1000 Purpose and scope.
178.1005 Flexible Bulk Container identification code.
178.1010 Marking of Flexible Bulk Containers.
178.1015 General Flexible Bulk Container standards.
178.1020 Period of use for transportation of hazardous materials in 
Flexible Bulk Containers.

Subpart R--Flexible Bulk Container Standards


Sec.  178.1000  Purpose and scope.

    (a) This subpart prescribes requirements for Flexible Bulk 
Containers (FBCs) intended for the transportation of hazardous 
materials. FBC standards in this subpart are based on the UN Model 
Regulations.
    (b) Terms used in this subpart are defined in Sec.  171.8 of this 
subchapter.


Sec.  178.1005  Flexible Bulk Container identification code.

    The Flexible Bulk Container code designation is BK3.

[[Page 1098]]

Sec.  178.1010  Marking of Flexible Bulk Containers.

    (a) The manufacturer must:
    (1) Mark every Flexible Bulk Container in a durable and clearly 
visible manner. The marking may be applied in a single line or in 
multiple lines provided the correct sequence is followed with the 
information required by this section. The following information is 
required in the sequence presented:
    (i) Except as provided in Sec.  178.503(e)(1)(ii), the United 
Nations packaging symbol as illustrated in Sec.  178.503(e)(1)(i).
    (ii) The code number designating the Flexible Bulk Container design 
type according to Sec.  178.1005. The letter ``W'' must follow the 
Flexible Bulk Container design type identification code on a Flexible 
Bulk Container when the Flexible Bulk Container differs from the 
requirements in subpart R of this part, or is tested using methods 
other than those specified in this subpart, and is approved by the 
Associate Administrator in accordance with Sec.  178.1035;
    (iii) The capital letter Z identifying that the Flexible Bulk 
Container meets Packing Group III performance standard under which the 
design type has been successfully tested.
    (iv) The month (designated numerically) and year (last two digits) 
of manufacture;
    (v) The country authorizing the allocation of the mark. The letters 
``USA'' indicate that the Flexible Bulk Container is manufactured and 
marked in the United States in compliance with the provisions of this 
subchapter.
    (vi) The name and address or symbol of the manufacturer or the 
approval agency certifying compliance with subpart R and subpart S of 
this part. Symbols, if used, must be registered with the Associate 
Administrator.
    (vii) The stacking test load in kilograms (kg). For Flexible Bulk 
Containers not designed for stacking the figure ``0'' must be shown.
    (viii) The maximum permissible gross mass in kg.
    (2) The following is an example of symbols and required markings 
for a Flexible Bulk container suitable for stacking; stacking load: 
1,000 kg; maximum gross mass: 2,500 kg.
[GRAPHIC] [TIFF OMITTED] TR07JA13.002

    (b) [Reserved]


Sec.  178.1015  General Flexible Bulk Container standards.

    (a) Each Flexible Bulk Containers must be sift-proof and completely 
closed during transport to prevent the release of contents and 
waterproof.
    (b) Parts of the Flexible Bulk Container that are in direct contact 
with hazardous materials:
    (1) Must not be affected or significantly weakened by those 
hazardous materials.
    (2) Must not cause a dangerous effect with the dangerous goods 
(e.g., catalyzing a reaction or reacting with the hazardous materials).
    (3) Must not allow permeation of the hazardous materials that could 
constitute a danger under conditions normally incident to 
transportation.
    (c) Filling and discharge devices must be so constructed as to be 
protected against damage during transport and handling. The filling and 
discharge devices must be capable of being secured against unintended 
opening.
    (d) Slings of the Flexible Bulk Container, if fitted with such, 
must withstand pressure and dynamic forces which can be expected under 
conditions normally incident to transportation.
    (e) Handling devices must be strong enough to withstand repeated 
use.
    (f) A venting device must be fitted to Flexible Bulk Containers 
intended to transport hazardous materials that may develop dangerous 
accumulation of gases within the Flexible Bulk Container. Any venting 
device must be designed so that external foreign substances are 
prevented from entering the Flexible Bulk Container through the venting 
device under conditions normally incident to transportation.


Sec.  178.1020  Period of use for transportation of hazardous materials 
in Flexible Bulk Containers.

    The use of Flexible Bulk Containers for the transport of hazardous 
materials is permitted for a period of time not to exceed two years 
from the date of manufacture of the Flexible Bulk Container.
0
103. Subpart S is added to read as follows:
Subpart S--Testing of Flexible Bulk Containers
Sec.
178.1030 Purpose and scope.
178.1035 General requirements.
178.1040 Preparation of Flexible Bulk Containers for testing.
178.1045 Drop test.
178.1050 Top lift test.
178.1055 Stacking test.
178.1060 Topple test.
178.1065 Righting test.
178.1070 Tear test.

Subpart S----Testing of Flexible Bulk Containers


Sec.  178.1030  Purpose and scope.

    This subpart prescribes certain testing requirements for Flexible 
Bulk Containers identified in subpart R of this part.


Sec.  178.1035  General requirements.

    (a) General. The test procedures prescribed in this subpart are 
intended to ensure that Flexible Bulk Containers containing hazardous 
materials can withstand normal conditions of transportation. These test 
procedures are considered minimum requirements. Each packaging must be 
manufactured and assembled so as to be capable of successfully passing 
the prescribed tests and to conform to the requirements of Sec.  173.24 
of this subchapter while in transportation.
    (b) Responsibility. The Flexible Bulk Container manufacturer is 
responsible for ensuring each Flexible Bulk Containers is capable of 
passing the prescribed tests. To the extent a Flexible Bulk Container's 
assembly function, including final closure, is performed by the person 
who offers a hazardous material for transportation, that person is 
responsible for performing the function in accordance with Sec. Sec.  
173.22 and 178.2 of this subchapter.
    (c) Definitions. For the purpose of this subpart:
    (1) Flexible Bulk Container design type refers to a Flexible Bulk 
Container that does not differ in structural design, size, material of 
construction and packing.
    (2) Design qualification testing is the performance of the drop, 
topple, righting, tear, stacking, and top-lift tests prescribed in this 
subpart, for each different Flexible Bulk Container design

[[Page 1099]]

type, at the start of production of that packaging.
    (3) Periodic design requalification test is the performance of the 
applicable tests specified in paragraph (c)(2) of this section on a 
Flexible Bulk Container design type, to requalify the design for 
continued production at the frequency specified in paragraph (e) of 
this section.
    (4) Production inspection is the inspection that must initially be 
conducted on each newly manufactured Flexible Bulk Container.
    (5) Different Flexible Bulk Container design type is one that 
differs from a previously qualified Flexible Bulk Container design type 
in structural design, size, material of construction, wall thickness, 
or manner of construction, but does not include:
    (i) A packaging that differs in surface treatment;
    (ii) A packaging that differs only in its lesser external 
dimensions (i.e., height, width, length) provided materials of 
construction and material thickness or fabric weight remain the same;
    (d) Design qualification testing. The packaging manufacturer must 
achieve successful test results for the design qualification testing at 
the start of production of each new or different Flexible Bulk 
Container design type. Application of the certification mark by the 
manufacturer constitutes certification that the Flexible Bulk Container 
design type passed the prescribed tests in this subpart.
    (e) Periodic design requalification testing. (1) Periodic design 
requalification must be conducted on each qualified Flexible Bulk 
Container design type if the manufacturer is to maintain authorization 
for continued production. The Flexible Bulk Container manufacturer must 
achieve successful test results for the periodic design requalification 
at sufficient frequency to ensure each packaging produced by the 
manufacturer is capable of passing the design qualification tests. 
Design requalification tests must be conducted at least once every 24 
months.
    (2) Changes in the frequency of design requalification testing 
specified in paragraph (e)(1) of this section are authorized if 
approved by the Associate Administrator.
    (f) Test samples. The manufacturer must conduct the design 
qualification and periodic tests prescribed in this subpart using 
random samples of packagings, in the numbers specified in the 
appropriate test section.
    (g) Proof of compliance. In addition to the periodic design 
requalification testing intervals specified in paragraph (e) of this 
section, the Associate Administrator, or a designated representative, 
may at any time require demonstration of compliance by a manufacturer, 
through testing in accordance with this subpart, to ensure packagings 
meet the requirements of this subpart. As required by the Associate 
Administrator, or a designated representative, the manufacturer must 
either:
    (1) Conduct performance tests or have tests conducted by an 
independent testing facility, in accordance with this subpart; or
    (2) Make a sample Flexible Bulk Container available to the 
Associate Administrator, or a designated representative, for testing in 
accordance with this subpart.
    (h) Record retention. Following each design qualification test and 
each periodic retest on a Flexible Bulk Container, a test report must 
be prepared. The test report must be maintained at each location where 
the Flexible Bulk Container is manufactured and each location where the 
design qualification tests are conducted, for as long as the Flexible 
Bulk Container is produced and for at least two years thereafter, and 
at each location where the periodic retests are conducted until such 
tests are successfully performed again and a new test report produced. 
In addition, a copy of the test report must be maintained by a person 
certifying compliance with this part. The test report must be made 
available to a user of a Flexible Bulk Container or a representative of 
the Department upon request. The test report, at a minimum, must 
contain the following information:
    (1) Name and address of test facility;
    (2) Name and address of applicant (where appropriate);
    (3) A unique test report identification;
    (4) Date of the test report;
    (5) Manufacturer of the packaging;
    (6) Description of the flexible bulk container design type (e.g., 
dimensions materials, closures, thickness, etc.), including methods of 
manufacture (e.g., blow molding) and which may include drawing(s) and/
or photograph(s);
    (7) Maximum capacity;
    (8) Characteristics of test contents (e.g., particle size for 
solids);
    (9) Mathematical calculations performed to conduct and document 
testing (e.g., drop height, test capacity, outage requirements, etc.);
    (10) Test descriptions and results; and
    (11) Signature with the name and title of signatory.


Sec.  178.1040  Preparation of Flexible Bulk Containers for testing.

    (a) Except as otherwise provided in this subchapter, each Flexible 
Bulk Container must be closed in preparation for testing and tests must 
be carried out in the same manner as if prepared for transportation. 
All closures must be installed using proper techniques and torques.
    (b) If the material to be transported is replaced for test purposes 
by a non-hazardous material, the physical properties (grain, size, 
viscosity) of the replacement material used that might influence the 
results of the required tests must correspond as closely as possible to 
those of the hazardous material to be transported. It is permissible to 
use additives, such as bags of lead shot, to achieve the requisite 
total package mass, so long as they do not affect the test results.


Sec.  178.1045  Drop test.

    (a) General. The drop test must be conducted for the qualification 
of all Flexible Bulk Container design types and performed periodically 
as specified in Sec.  178.1035(e) of this subpart.
    (b) Special preparation for the drop test. Flexible Bulk Containers 
must be filled to their maximum permissible gross mass.
    (c) Test method. (1) A sample of all Flexible Bulk Container design 
types must be dropped onto a rigid, non-resilient, smooth, flat and 
horizontal surface. This test surface must be large enough to be 
immovable during testing and sufficiently large enough to ensure that 
the test Flexible Bulk Container falls entirely upon the surface. The 
test surface must be kept free from local defects capable of 
influencing the test results.
    (2) Following the drop, the Flexible Bulk Container must be 
restored to the upright position for observation.
    (d) Drop height. (1) For all Flexible Bulk Containers, drop heights 
are specified as follows: Packing group III: 0.8 m (2.6 feet)
    (2) Drop tests are to be performed with the solid to be transported 
or with a non-hazardous material having essentially the same physical 
characteristics.
    (e) Criteria for passing the test. For all Flexible Bulk Container 
design types there may be no loss of the filling substance. However a 
slight discharge (e.g., from closures or stitch holes) upon impact is 
not considered a failure of the Flexible Bulk Container provided that 
no further leakage occurs after the container has been restored to the 
upright position.


Sec.  178.1050  Top lift test.

    (a) General. The top lift test must be conducted for the 
qualification of all of

[[Page 1100]]

Flexible Bulk Containers design types to be lifted from the top.
    (b) Special preparation for the top lift test. Flexible Bulk 
Container design types must be filled to six times the maximum 
permissible gross mass, the load being evenly distributed.
    (c) Test method. (1) A Flexible Bulk Container must be lifted in 
the manner for which it is designed until clear of the floor and 
maintained in that position for a period of five minutes.
    (2) If not tested as indicated in paragraph (c)(1) of this section, 
a Flexible Bulk Container design type must be tested as follows:
    (i) Fill the Flexible Bulk Container to 95% full with a material 
representative of the product to be shipped.
    (ii) Suspend the Flexible Bulk Container by its lifting devices.
    (iii) Apply a constant downward force through a specially designed 
platen. The platen will be a minimum of 60 percent and a maximum of 80 
percent of the cross sectional surface area of the Flexible Bulk 
Container.
    (iv) The combination of the mass of the filled Flexible Bulk 
Container and the force applied through the platen must be a minimum of 
six times the maximum net mass of the Flexible Bulk Container. The test 
must be conducted for a period of five minutes.
    (v) Other equally effective methods of top lift testing and 
preparation may be used with approval of the Associate Administrator.
    (d) Criteria for passing the test. For all Flexible Bulk Containers 
design types designed to be lifted from the top, there may be no damage 
to the Flexible Bulk Container or its lifting devices that renders the 
Flexible Bulk Container unsafe for transport, and no loss of contents.


Sec.  178.1055  Stacking test.

    (a) General. The stacking test must be conducted for the 
qualification of all Flexible Bulk Containers design types.
    (b) Special preparation for the stacking test. All Flexible Bulk 
Containers design types must be loaded to their maximum permissible 
gross mass.
    (c) Test method. (1) All Flexible Bulk Containers must be placed on 
their base on level, hard ground and subjected to a uniformly 
distributed superimposed test load that is four times the design type 
maximum gross weight for a period of at least twenty-four hours.
    (2) For all Flexible Bulk Containers, the load must be applied by 
one of the following methods:
    (i) Four Flexible Bulk Containers of the same type loaded to their 
maximum permissible gross mass and stacked on the test Flexible Bulk 
Container;
    (ii) The calculated superimposed test load weight loaded on either 
a flat plate or a reproduction of the base of the Flexible Bulk 
Container, which is stacked on the test Flexible Bulk Container.
    (d) Criteria for passing the test. There may be no deterioration 
that renders the Flexible Bulk Container unsafe for transportation and 
no loss of contents during the test or after removal of the test load.


Sec.  178.1060  Topple test.

    (a) General. The topple test must be conducted for the 
qualification of all Flexible Bulk Containers design types.
    (b) Special preparation for the topple test. Flexible Bulk 
Container design types must be filled to their maximum permissible 
gross mass, the load being evenly distributed.
    (c) Test method. Samples of all Flexible Bulk Container design 
types must be toppled onto any part of its top by lifting the side 
furthest from the drop edge upon a rigid, non-resilient, smooth, flat 
and horizontal surface. This test surface must be large enough to be 
immovable during testing and sufficiently large enough to ensure that 
the test Flexible Bulk Container falls entirely upon the surface. The 
test surface must be kept free from local defects capable of 
influencing the test results.
    (d) Topple height. (1) For all Flexible Bulk Containers, topple 
heights are specified as follows: Packing group III: 0.8 m (2.6 feet).
    (e) Criterion for passing the test. For all Flexible Bulk Container 
design types there may be no loss of the filling substance. However a 
slight discharge (e.g., from closures or stitch holes) upon impact is 
not considered a failure of the Flexible Bulk Container.


Sec.  178.1065  Righting test.

    (a) General. The righting test must be conducted for the 
qualification of all Flexible Bulk Containers design types designed to 
be lifted from the top or side.
    (b) Special preparation for the righting test. Flexible Bulk 
Container design types must be filled to not less than 95% of their 
capacity and to their maximum permissible gross mass, the load being 
evenly distributed.
    (c) Test method. A sample Flexible Bulk Container design type must 
be tested; the Flexible Bulk Container should start lying on its side 
and then must be lifted at a speed of at least 0.1m/s (0.328 ft/s) to 
an upright position clear of the floor, by no more than half of the 
lifting devices.
    (d) Criterion for passing the test. For all Flexible Bulk Container 
design types there must be no damage that renders the Flexible Bulk 
Container unsafe for transport or handling.


Sec.  178.1070  Tear test.

    (a) General. The tear test must be conducted for the qualification 
of all of Flexible Bulk Containers design types.
    (b) Special preparation for the tear test. Flexible Bulk Container 
design types must be filled its maximum permissible gross mass, the 
load being evenly distributed.
    (c) Test method. (1) A Flexible Bulk Container design type must be 
placed on the ground and a 300 mm (11.9 in) cut shall be made. This 300 
mm (11.9 in) cut must:
    (i) Completely penetrate all layers of the Flexible Bulk Container 
on a wall with a wide face.
    (ii) Be made at a 45[deg] angle to the principal axis of the 
Flexible Bulk Container, halfway between the bottom surface and the top 
level of the contents.
    (2) The Flexible Bulk Container after being cut according to the 
provisions of Sec.  178.1070(c)(1), must be subjected to a uniformly 
distributed superimposed load equivalent to twice the maximum gross 
mass of the package. This load must be applied for at least fifteen 
minutes. Flexible Bulk Containers that are designed to be lifted from 
the top or the side must, after removal of the superimposed load, be 
lifted clear of the floor and maintained in that position for a period 
of fifteen minutes.
    (d) Criterion for passing the test. For all Flexible Bulk Container 
design types, the cut must not spread more than an additional 25% of 
its original length.

    Issued in Washington, DC, on December 20, 2012 under authority 
delegated in 49 CFR part 106.
Cynthia L. Quarterman,
Administrator.
[FR Doc. 2012-31243 Filed 12-31-12; 4:15 pm]
BILLING CODE 4910-60-P


