[Federal Register Volume 87, Number 205 (Tuesday, October 25, 2022)]
[Rules and Regulations]
[Page 64384]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: C1-2022-17031]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Pipeline and Hazardous Materials Safety Administration

49 CFR Part 192

[Docket No. PHMSA-2011-0023; Amdt. No. 192-132]
RIN 2137-AF39


Pipeline Safety: Safety of Gas Transmission Pipelines: Repair 
Criteria, Integrity Management Improvements, Cathodic Protection, 
Management of Change, and Other Related Amendments

Correction

    In Rule Document 2022-17031, appearing on pages 52224-52279, in the 
issue of Wednesday, August 24, 2022, make the following correction:

0
On page 52267, in the third column, paragraph ``(2)(i)'' is corrected 
to read as set forth below.


Sec.  192.3   Definitions. [Corrected]

* * * * *
    (2)(i) If the length of the wrinkle bend cannot be reliably 
determined, then wrinkle bend means a bend in the pipe where (h/D)*100 
exceeds 2 when S is less than 37,000 psi (255 MPa), where (h/D)*100 
exceeds (47000--S)/10,000 +1 for psi [324--S)/69 +1 for MPa] when S is 
greater than 37,000 psi (255 MPa) but less than 47,000 psi (324 MPa), 
and where (h/D)*100 exceeds 1 when S is 47,000 psi (324 MPa) or more.
* * * * *
[FR Doc. C1-2022-17031 Filed 10-24-22; 8:45 am]
BILLING CODE 0099-10-P


