

[Federal Register: November 30, 2007 (Volume 72, Number 230)]
[Notices]               
[Page 67782-67784]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr30no07-109]                         

-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Pipeline and Hazardous Materials Safety Administration

[Docket No. PHMSA-2007-27181 (Notice No. 07-11)]

 
Information Collection Activities

AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), 
DOT.

ACTION: Notice and request for comments.

-----------------------------------------------------------------------

[[Page 67783]]

SUMMARY: In accordance with the Paperwork Reduction Act of 1995, PHMSA 
invites comments on certain information collections pertaining to 
hazardous materials transportation for which PHMSA intends to request 
renewal from the Office of Management and Budget (OMB).

DATES: Interested persons are invited to submit comments on or before 
January 29, 2008.

ADDRESSES: You may submit comments identified by the docket number 
(PHMSA-2007-27181) by any of the following methods:
     Federal eRulemaking Portal: http://www.regulations.gov. 

Follow the online instructions for submitting comments.
     Fax: 1-202-493-2251.
     Mail: Docket Management System, U.S. Department of 
Transportation, Docket Operations, M-30, West Building Ground Floor, 
Room W12-140, 1200 New Jersey Avenue, SE., Washington, DC 20590.
     Hand Delivery: Docket Operations, M-30, West Building 
Ground Floor, Room W12-140, 1200 New Jersey Avenue, SE., Washington, DC 
20590, from 9 a.m. to 5 p.m., Monday through Friday, except Federal 
holidays.
    Instructions: All submissions must include the agency name and 
docket number or Regulation Identification Number (RIN) for this 
notice. Internet users may access comments received by DOT at: http://www.regulations.gov.
 Note that comments received will be posted without 

change to: http://www.regulations.gov. including any personal 

information provided.
    Requests for a copy of an information collection should be directed 
to Deborah Boothe or T. Glenn Foster, Office of Hazardous Materials 
Standards (PHH-11), Pipeline and Hazardous Materials Safety 
Administration, 1200 New Jersey Avenue, SE., East Building, 2nd Floor, 
Washington, DC 20590-0001, Telephone (202) 366-8553.

FOR FURTHER INFORMATION CONTACT: Deborah Boothe or T. Glenn Foster, 
Office of Hazardous Materials Standards (PHH-11), Pipeline and 
Hazardous Materials Safety Administration, 1200 New Jersey Avenue, SE., 
East Building, 2nd Floor, Washington, DC 20590-0001, Telephone (202) 
366-8553.

SUPPLEMENTARY INFORMATION: Section 1320.8(d), Title 5, Code of Federal 
Regulations requires PHMSA to provide interested members of the public 
and affected agencies an opportunity to comment on information 
collection and recordkeeping requests. This notice identifies 
information collection requests that PHMSA will be submitting to OMB 
for renewal and extension. These information collections are contained 
in 49 CFR 171.6 and the Hazardous Materials Regulations (HMR; 49 CFR 
Parts 171-180). PHMSA has revised burden estimates, where appropriate, 
to reflect current reporting levels or adjustments based on changes in 
proposed or final rules published since the information collections 
were last approved. The following information is provided for each 
information collection: (1) Title of the information collection, 
including former title if a change is being made; (2) OMB control 
number; (3) summary of the information collection activity; (4) 
description of affected public; (5) estimate of total annual reporting 
and recordkeeping burden; and (6) frequency of collection. PHMSA will 
request a three-year term of approval for each information collection 
activity and, when approved by OMB, publish notice of the approval in 
the Federal Register.
    PHMSA requests comments on the following information collections:

    Title: Testing, Inspection and Marking Requirements for Cylinders.
    OMB Control Number: 2137-0022.
    Summary: Requirements in Sec.  173.301 for qualification, 
maintenance and use of cylinders require that cylinders be periodically 
inspected and retested to ensure continuing compliance with packaging 
standards. Information collection requirements address registration of 
retesters and marking of cylinders by retesters with their 
identification number and retest date following conduct of tests. 
Records showing the results of inspections and retests must be kept by 
the cylinder owner or designated agent until expiration of the retest 
period or until the cylinder is reinspected or retested, whichever 
occurs first. These requirements are intended to ensure that retesters 
have the qualifications to perform tests and to identify to cylinder 
fillers and users that cylinders are qualified for continuing use. 
Information collection requirements in Sec.  173.303 require that 
fillers of acetylene cylinders keep, for at least 30 days, a daily 
record of the representative pressure to which cylinders are filled.
    Affected Public: Fillers, owners, users and retesters of reusable 
cylinders.
    Recordkeeping:

Number of Respondents: 139,352.
Total Annual Responses: 153,287.
Total Annual Burden Hours: 168,431.
Frequency of collection: On occasion.

    Title: Approvals for Hazardous Materials.
    OMB Control Number: 2137-0557.
    Summary: Without these requirements there is no means to: (1) 
Determine whether applicants who apply to become designated approval 
agencies are qualified to evaluate package design, test packages, 
classify hazardous materials, etc.; (2) verify that various containers 
and special loading requirements for vessels meet the requirements of 
the HMR; and (3) assure that regulated hazardous materials pose no 
danger to life and property during transportation.
    Affected Public: Businesses and other entities who must meet the 
approval requirements in the HMR.
    Recordkeeping:

Number of Respondents: 10,723.
Total Annual Responses: 11,074.
Total Annual Burden Hours: 25,605.
Frequency of collection: On occasion.

    Title: Rail Carrier and Tank Car Tank Requirements.
    OMB Control Number: 2137-0559.
    Summary: This information collection consolidates and describes the 
information provisions in parts 172, 173, 174, 179, and 180 of the HMR 
on the transportation of hazardous materials by rail and the 
manufacture, qualification, maintenance and use of tank cars. The types 
of information collected include:
    (1) Approvals of the Association of American Railroads (AAR) Tank 
Car Committee: An approval is required from the AAR Tank Car Committee 
for a tank car to be used for a commodity other than those specified in 
part 173 and on the certificate of construction. This information is 
used to ascertain whether a commodity is suitable for transportation in 
a tank car. AAR approval also is required for an application for 
approval of designs, materials and construction, conversion or 
alteration of tank car tanks constructed to a specification in part 179 
or an application for construction of tank cars to any new 
specification. This information is used to ensure that the design, 
construction or modification of a tank car or the construction of a 
tank car to a new specification is performed in accordance with the 
applicable requirements.
    (2) Progress Reports: Each owner of a tank car that is required to 
be modified to meet certain requirements specified in Sec.  173.31 must 
submit a progress report to the Federal Railroad Administration (FRA). 
This information is used by FRA to ensure that all affected tank cars 
are modified before the regulatory compliance date.
    (3) FRA Approvals: An approval is required from FRA to transport a 
bulk packaging (such as a portable tank, IM portable tank, intermediate 
bulk container, cargo tank, or multi-unit tank

[[Page 67784]]

car tank) containing a hazardous material in container-on-flat-car or 
trailer-on-flat-car service other than as authorized by Sec.  174.63. 
FRA uses this information to ensure that the bulk package is properly 
secured using an adequate restraint system during transportation. Also 
an FRA approval is required for the movement of any tank car that does 
not conform to the applicable requirements in the HMR. These latter 
movements are currently being reported under the information collection 
for exemption applications.
    (4) Manufacturer Reports and Certificate of Construction: These 
documents are prepared by tank car manufacturers and used by owners, 
users and FRA personnel to verify that rail tank cars conform to the 
applicable specification.
    (5) Quality Assurance Program: Facilities that build, repair, and 
ensure the structural integrity of tank cars are required to develop 
and implement a quality assurance program. This information is used by 
the facility and DOT compliance personnel to ensure that each tank car 
is constructed or repaired in accordance with the applicable 
requirements.
    (6) Inspection Reports: A written report must be prepared and 
retained for each tank car that is inspected and tested in accordance 
with Sec.  180.509 of the HMR. Rail carriers, users, and the FRA use 
this information to ensure that rail tank cars are properly maintained 
and in safe condition for transporting hazardous materials.
    Affected Public: Manufacturers, owners and rail carriers of tank 
cars.
    Recordkeeping:

Number of Respondents: 266.
Total Annual Responses: 16,782.
Total Annual Burden Hours: 2,689.
Frequency of collection: Annually.

    Title: Inspection and Testing of Meter Provers.
    OMB Control Number: 2137-0620.
    Summary: This information collection and recordkeeping burden is 
the result of efforts to eliminate exemptions that are no longer needed 
and incorporate the use, inspection, and maintenance of mechanical 
displacement meter provers (meter provers) used to check the accurate 
flow of liquid hazardous materials into bulk packagings, such as 
portable tanks and cargo tank motor vehicles, under the HMR. These 
meter provers are used to ensure that the proper amount of liquid 
hazardous materials is being loaded and unloaded involving bulk 
packagings, such as cargo tanks and portable tanks. These meter provers 
consist of a gauge and several pipes that always contain small amounts 
of the liquid hazardous material in the pipes as residual material, 
and, therefore, must be inspected and maintained in accordance with the 
HMR to ensure they are in proper calibration and working order. These 
meter provers are not subject to the specification testing and 
inspection requirements in part 178. However, these meter provers must 
be visually inspected annually and hydrostatic pressure tested every 
five years in order to ensure they are properly working as specified in 
Sec.  173.5a of the FHMR. Therefore, this information collection 
requires that:
    (1) Each meter prover must undergo and pass an external visual 
inspection annually to ensure that the meter provers used in the flow 
of liquid hazardous materials into bulk packagings are accurate and in 
conformance with the performance standards in the HMR.
    (2) Each meter prover must undergo and pass a hydrostatic pressure 
test at least every five years to ensure that the meter provers used in 
the flow of liquid hazardous materials into bulk packagings are 
accurate and in conformance with the performance standards in the HMR.
    (3) Each meter prover must successfully complete the test and 
inspection and must be marked in accordance with Sec.  180.415(b) and 
in accordance with Sec.  173.5a.
    (4) Each owner must retain a record of the most recent visual 
inspection and pressure test until the meter prover is requalified.
    Affected Public: Owners of meter provers used to measure liquid 
hazardous materials flow into bulk packagings such as cargo tanks and 
portable tanks.
    Recordkeeping:


Number of Respondents: 50.
Total Annual Responses: 250.
Total Annual Burden Hours: 175.
Frequency of collection: On occasion.

    Title: Requirements for United Nations (UN) Cylinders.
    OMB Control Number: 2137-0621.
    Summary: This information collection and recordkeeping burden is 
the result of efforts to amend the HMR to adopt standards for the 
design, construction, maintenance and use of cylinders and multiple-
element gas containers (MEGCs) based on the standards contained in the 
United Nations (UN) Recommendations on the Transport of Dangerous 
Goods. Aligning the HMR with the UN Recommendations promotes 
flexibility, permits the use of technological advances for the 
manufacture of the pressure receptacles, provides for a broader 
selection of pressure receptacles, reduces the need for exemptions, and 
facilitates international commerce in the transportation of compressed 
gases. Information collection requirements address domestic and 
international manufacturers of cylinders that request approval by the 
approval agency for cylinder design types. The approval process for 
each cylinder design type includes review, filing, and recordkeeping of 
the approval application. The approval agency is required to maintain a 
set of the approved drawings and calculations for each design it 
reviews and a copy of each initial design type approval certificate 
approved by the Associate Administrator for not less than 20 years.
    Affected Public: Fillers, owners, users, and retesters of UN 
cylinders.
    Recordkeeping:

Number of Respondents: 50.
Total Annual Responses: 150.
Total Annual Burden Hours: 900.
Frequency of collection: On occasion.

    Issued in Washington, DC, on November 26, 2007.
Edward T. Mazzullo,
Director, Office of Hazardous Materials Standards.
 [FR Doc. E7-23244 Filed 11-29-07; 8:45 am]

BILLING CODE 4910-60-P
