[Federal Register Volume 86, Number 155 (Monday, August 16, 2021)]
[Notices]
[Pages 45762-45764]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2021-17434]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2021-0005]


LabTest Certification Inc.: Application for Recognition

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: In this notice, OSHA announces the application of LabTest 
Certification, Inc. (LCI), for recognition as a Nationally Recognized 
Testing Laboratory (NRTL) and presents the agency's preliminary finding 
to grant this recognition.

DATES: Submit comments, information, and documents in response to this 
notice, or requests for an extension of time to make a submission, on 
or before September 15, 2021.

ADDRESSES: Submit comments by any of the following methods:
    Electronically: You may submit comments and attachments 
electronically at: https://www.regulations.gov, which is the Federal 
eRulemaking Portal. Follow the instructions online for submitting 
comments.
    Docket: To read or download comments or other material in the 
docket, go to http://www.regulations.gov. Documents in the docket are 
listed in the http://www.regulations.gov index; however, some 
information (e.g., copyrighted material) is not publicly available to 
read or download through the website. All submissions, including 
copyrighted material, are available for inspection through the OSHA 
Docket Office. Contact the OSHA Docket Office at (202) 693-2350 (TTY 
(877) 889-5627) for assistance in locating docket submissions.
    Instructions: All submissions must include the agency name and the 
OSHA docket number for this Federal Register notice (OSHA-2017-0014). 
OSHA will place comments and requests to speak, including personal 
information, in the public docket, which may be available online. 
Therefore, OSHA cautions interested parties about submitting personal 
information such as Social Security numbers and birthdates. For further 
information on submitting comments, see the ``Public Participation'' 
heading in the section of this notice titled SUPPLEMENTARY INFORMATION.
    Extension of comment period: Submit requests for an extension of 
the comment period on or before September 15, 2021 to the Office of 
Technical Programs and Coordination Activities, Directorate of 
Technical Support and Emergency Management, Occupational Safety and 
Health Administration, U.S. Department of Labor, 200 Constitution 
Avenue NW, Room N-3653, Washington, DC 20210, or by fax to (202) 693-
1644.

FOR FURTHER INFORMATION CONTACT: Information regarding this notice is 
available from the following sources:
    Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office 
of Communications, U.S. Department of Labor, telephone: (202) 693-1999; 
email: meilinger.francis2@dol.gov.
    General and technical information: Contact Mr. Kevin Robinson, 
Director, Office of Technical Programs and Coordination Activities, 
Directorate of Technical Support and Emergency Management, Occupational 
Safety and Health Administration, U.S. Department of Labor, telephone: 
(202) 693-2110; email: robinson.kevin@dol.gov.

SUPPLEMENTARY INFORMATION:

I. Background

    Many of OSHA's workplace standards require that a NRTL test and 
certify certain types of equipment as safe for use in the workplace. 
NRTLs are independent laboratories that meet OSHA's requirements for 
performing safety testing and certification of products used in the 
workplace. To obtain and retain OSHA recognition, the NRTLs must meet 
the requirements in the NRTL Program regulations at 29 CFR 1910.7. More 
specifically, to be recognized by OSHA, an organization must: (1) Have 
the appropriate capability to test, evaluate, and approve products to 
assure their safe use in the workplace; (2) be completely independent 
of employers subject to the tested equipment requirements, and 
manufacturers and vendors of products for which OSHA requires 
certification; (3) have internal programs that ensure proper control of 
the testing and certification process; and (4) have effective reporting 
and complaint handling procedures. Recognition is an acknowledgement by 
OSHA that the NRTL has the capabilities to perform independent safety 
testing and certification of the specific products covered within the 
NRTL's scope of recognition and is not a delegation or grant of 
government authority. Recognition of a NRTL by OSHA also allows 
employers to use products certified by that NRTL to meet those OSHA 
standards that require product testing and certification.

[[Page 45763]]

    The agency processes applications for initial recognition following 
requirements in Appendix A of 29 CFR 1910.7. This appendix requires 
OSHA to publish two notices in the Federal Register in processing an 
application. In the first notice, OSHA announces the application, 
provides its preliminary findings, and solicits comments on its 
preliminary findings. In the second notice, the agency provides its 
final decision on the application and sets forth the NRTL's scope of 
recognition.

II. Notice of the Application for Recognition

    OSHA is providing notice that LabTest Certification, Inc., (LCI) is 
applying for recognition as a NRTL. According to public information 
(see https://labtestcert.com/about-labtest/) LCI states that it is an 
internationally accredited testing laboratory. In its application, LCI 
lists the current address of its headquarters as: LabTest 
Certification, Inc., 205--8291 92 Street, Delta, BC Canada V4G 0A4. 
OSHA has determined preliminarily that LCI has the capability to 
perform as a NRTL as outlined in 29 CFR 1910.7.
    Each NRTL's scope of recognition has two elements: (1) The type(s) 
of products the NRTL may test, with each type specified by its 
applicable test standard; and (2) the recognized site(s) that have the 
technical capability to perform the product-testing and product-
certification activities for the applicable test standards within the 
NRTL's scope of recognition. LCI applied on January 29, 2016, for one 
recognized site (OSHA-2021-0005-0001). This application was amended on 
June 10, 2021, to remove three of the eight standards requested in the 
original application. LCI's original application also requested that 
supplemental programs be included in their recognition. However, on 
October 1, 2019, OSHA published an update to the NRTL Program Policies, 
Procedures and Guidelines Directive, CPL 01-00-004, which eliminated 
supplemental programs from the NRTL Program. Therefore, OSHA does not 
grant recognition to NRTL applicants for supplemental programs. The 
following sections set forth the requested scope of recognition 
included in LCI's application that OSHA has considered.

A. Standards Requested for Recognition

    Table 1 below lists the appropriate test standards included in 
LCI's amended application for testing and certification of products 
under the NRTL Program.

  Table 1--Proposed List of Appropriate Test Standards for Inclusion in
                     LCI's NRTL Scope of Recognition
------------------------------------------------------------------------
           Test standard                     Test standard title
------------------------------------------------------------------------
UL 1598...........................  Luminaires.
UL 60079-0........................  Explosive Atmospheres--Part 0:
                                     Equipment--General Requirements.
UL 60079-1........................  Explosive Atmospheres--Part 1:
                                     Equipment Protection by Flameproof
                                     Enclosures ``d''.
UL 60079-11.......................  Explosive Atmospheres--Part 11:
                                     Equipment Protection by Intrinsic
                                     Safety ``i''.
UL 60079-15.......................  Explosive Atmospheres--Part 15:
                                     Equipment Protection by Type of
                                     Protection ``n''.
------------------------------------------------------------------------

B. Sites Requested for Recognition

    The current address of the LCI site included in its application for 
recognition as a NRTL is:
    1. LabTest Certification, Inc., 205--8291 92 Street, Delta, BC 
Canada V4G 0A4. The NRTL Program requires that to be a recognized site, 
the site listed above must have the capability to conduct product 
testing in accordance with the appropriate test standard for the 
equipment or material being tested and certified.

IV. Preliminary Finding on the Application for Recognition as a NRTL

    OSHA's NRTL Program recognition process involves a thorough 
analysis of a NRTL applicant's policies and procedures, and a 
comprehensive on-site review of the applicant's testing and 
certification activities to ensure that the applicant meets the 
requirements of 29 CFR 1910.7. OSHA staff performed a detailed analysis 
of LCI's application packet and reviewed other pertinent information. 
OSHA staff also performed a comprehensive on-site assessment of LCI's 
testing facility, at LCI Delta Canada on December 11-12, 2018. An 
overview of OSHA's assessment of the four requirements for recognition 
(i.e., capability, control procedures, independence, and credible 
reports and complaint handling) is provided below.

A. Capability

    Section 1910.7(b)(1) states that, for each specified item of 
equipment or material to be listed, labeled, or accepted, the NRTL must 
have the capability (including proper testing equipment and facilities, 
trained staff, written testing procedures, and calibration and quality-
control programs) to perform appropriate testing. OSHA staff performed 
a detailed analysis of LCI's application packet and reviewed other 
pertinent information to assess its capabilities to perform testing and 
certification activities. OSHA preliminarily determined that LCI has 
demonstrated these capabilities through the following:
     LCI's facility has adequate test areas, energy sources, 
and procedures for controlling incompatible activities.
     LCI provided a detailed list of its testing equipment. 
Review of the application shows that the equipment listed is available 
and adequate for the standards for which it seeks recognition.
     LCI has detailed procedures for conducting testing, 
review, and evaluation, and for capturing the test and other data 
required by the test standards for which it seeks recognition.
     LCI has detailed procedures addressing the maintenance and 
calibration of equipment, and the types of records maintained for, or 
supporting laboratory activities.
     LCI has sufficient qualified personnel to perform the 
proposed scope of testing based on their education, training, technical 
knowledge, and experience.
     LCI has an adequate quality-control system in place to 
conduct internal audits, as well as track and resolve nonconformances.
    OSHA's on-site assessment of LCI's facility confirmed the 
capabilities described in its application packet. The assessors found 
some nonconformances with the requirements of 29 CFR 1910.7. LCI 
addressed these issues sufficiently to meet the applicable NRTL 
requirements.

B. Control Procedures

    Section 1910.7(b)(2) requires that the NRTL provide controls and 
services, to the extent necessary, for the particular equipment or 
material to be listed, labeled, or accepted. These controls and 
services include procedures for identifying the listed or labeled 
equipment or materials, inspections of production runs at factories to 
assure conformance with test standards, and

[[Page 45764]]

field inspections to monitor and assure the proper use of identifying 
marks or labels. OSHA staff performed a detailed analysis of LCI's 
application packet and reviewed other pertinent information to assess 
its control procedures. OSHA preliminarily determined that LCI has 
demonstrated these capabilities through the following:
     LCI has a quality-control manual and detailed procedures 
to address the steps involved to list and certify products.
     LCI has a registered certification mark.
     LCI has certification procedures to address the 
authorization of certifications and audits of factory facilities. The 
audits apply to both the initial evaluations and the follow-up 
inspections of manufacturers' facilities.
    OSHA's on-site assessment of LCI's facility confirmed the 
capabilities described in its application packet. The assessors found 
some nonconformances with the requirements of 29 CFR 1910.7. LCI 
addressed these issues sufficiently to meet the applicable NRTL 
requirements.

C. Independence

    Section 1910.7(b)(3) requires that the NRTL be completely 
independent of employers that are subject to the testing requirements, 
and of any manufacturers or vendors of equipment or materials tested 
under the NRTL Program. The revised NRTL Program Policies, Procedures 
and Guidelines Directive, CPL-01-00-004, allows NRTLs to comply with 
the requirement in the NRTL Program regulation that NRTLs be 
``completely independent of employers subject to the tested equipment 
requirements, and of any manufacturers or vendors of equipment or 
materials being tested for these purposes'' (29 CFR 1910.7(b)(3)) by 
meeting the minimum performance standards of Annex B of the NRTL 
Program Directive, CPL-01-00-004, with respect to impartiality. The 
revised policy focuses on the NRTL's ability to effectively identify, 
eliminate and control any risk to its impartiality.
    This policy provides for the NRTL to identify risks to impartiality 
on an ongoing basis and when risks to impartiality are identified, and 
for the NRTL to demonstrate how it eliminates or minimizes such risks. 
OSHA staff performed a detailed analysis of LCI's application packet 
and reviewed other pertinent information to assess its independence. 
OSHA preliminarily determined that LCI has demonstrated independence 
through the following:
     LCI is a privately-owned organization, and OSHA found no 
information regarding ownership that would qualify as a conflict under 
OSHA's independence policy.
     LCI showed that it has none of the relationships described 
in OSHA's independence policy or any other relationship that could 
subject it to undue influence when testing for product safety.
     LCI has policies and procedures in place to identify risks 
to impartiality and when risks to impartiality are found, LCI has 
policies and procedures to eliminate or minimize such risks.

D. Credible Reports and Complaint Handling

    Section 1910.7(b)(4) specifies that a NRTL must maintain effective 
procedures for producing credible findings and reports that are 
objective and free of bias. The NRTL must also have procedures for 
handling complaints and disputes under a fair and reasonable system. 
OSHA staff performed a detailed analysis of LCI's application packet 
and reviewed other pertinent information to assess its ability to 
produce credible results and handle complaints. OSHA preliminarily 
determined that LCI has demonstrated these capabilities through the 
following:
     LCI has detailed procedures describing the content of test 
reports, and other detailed procedures describing the preparation and 
approval of these reports.
     LCI has procedures for recording, analyzing, and 
processing complaints from users, manufacturers, and other parties in a 
fair manner.
    OSHA's on-site assessments of LCI's facilities confirmed the 
capabilities described in its application packet. The assessors found 
some nonconformances with the requirements of 29 CFR 1910.7. LCI 
addressed these issues sufficiently to meet the applicable NRTL 
requirements.
    OSHA's review of the application file and pertinent documentation, 
as well as the results of the on-site assessments, indicate that LCI 
can meet the requirements prescribed by 29 CFR 1910.7 for recognition 
as a NRTL for its site located in Delta, BC Canada.
    OSHA's preliminary finding does not constitute an interim or 
temporary approval of LCI's application.
    OSHA welcomes public comment as to whether LCI meets the 
requirements of 29 CFR 1910.7 for recognition as a NRTL. Comments 
should consist of pertinent written documents and exhibits. Commenters 
needing more time to comment must submit a request in writing, stating 
the reasons for the request, for an extension by the due date for 
comments. OSHA will limit any extension to 10 days unless the requester 
justifies a longer time period. OSHA may deny a request for an 
extension if it is not adequately justified. To review copies of the 
exhibits identified in this notice, as well as comments submitted to 
the docket, contact the Docket Office, Room N-3653, Occupational Safety 
and Health Administration, U.S. Department of Labor, at the above 
address. Please note: Due to the COVID-19 pandemic, the Docket Office 
is closed to the public at this time but can be contacted at (202) 693-
2350. These materials also are generally available online at http://www.regulations.gov under Docket No. OSHA-2021-0005. All documents in 
the docket (including this Federal Register notice) are listed in the 
https://www.regulations.gov index; however, some information (e.g., 
copyrighted material) is not publicly available to read or download 
through the website. All submissions, including copyrighted material, 
are available for inspection through the OSHA Docket Office.
    OSHA staff will review all comments submitted to the docket in a 
timely manner and, after addressing the issues raised by these 
comments, will make a recommendation to the Assistant Secretary for 
Occupational Safety and Health regarding LCI's application for 
recognition as a NRTL. The Assistant Secretary will make the final 
decision on granting the application. In making this decision, the 
Assistant Secretary may undertake other proceedings prescribed in 
Appendix A to 29 CFR 1910.7.
    OSHA will publish a public notice of this final decision in the 
Federal Register.

IV. Authority and Signature

    James S. Frederick, Acting Assistant Secretary of Labor for 
Occupational Safety and Health, authorized the preparation of this 
notice. Accordingly, the agency is issuing this notice pursuant to 29 
U.S.C. 657(g)(2), Secretary of Labor's Order No. 8-2020 (85 FR 58393, 
September 18, 2020) and 29 CFR 1910.7.

    Signed at Washington, DC, on August 6, 2021.
James S. Frederick,
Acting Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2021-17434 Filed 8-13-21; 8:45 am]
BILLING CODE 4510-26-P


