   # --------------------------------------------------------------------------------
Standard Number:
--------------------------------------------------------------------------------
1910.1200
OSHA requirements are set by statute, standards and regulations. Our interpretation letters explain these requirements and how they apply to particular circumstances, but they cannot create additional employer obligations. This letter constitutes OSHA's interpretation of the requirements discussed. Note that our enforcement guidance may be affected by changes to OSHA rules. Also, from time to time we update our guidance in response to new information. To keep apprised of such developments, you can consult OSHA's website at http://www.osha.gov.
June 4 2013
Dr. Robert L. Watters, Jr.
National Institute of Standards and Technology
100 Bureau Drive, Stop 1070
Gaithersburg, MD 20899
Dear Dr. Watters:
Thank you for your November 15, 2012, email to the Occupational Safety and Health Administration's (OSHA) Directorate of Enforcement Programs. Your questions concerned the labeling requirements regarding the revised Hazard Communication standard (HCS 2012), 29 CFR 1910.1200. This letter constitutes OSHA's interpretation only of the requirements herein, and may not be applicable to any questions not delineated within your original correspondence. Your paraphrased questions and our responses are below.
Background: The National Institute of Standards and Technology (NIST) produces nearly 1,300 Standard Reference Materials (SRMs) used to assure the accuracy of customers' measurements. NIST sells approximately 33,000 SRMs per year. Most of these are in small containers. Placing all the required information on a HCS 2012 compliant label[1] will present a significant challenge to NIST and other distributors who must label small containers of hazardous chemicals, such as 5 milliliter (mL) vials or 50 mL bottles.
Question 1: Can NIST provide a key (e.g., a numbering system) linking each individual 5 mL vial or 50 mL bottle to an accompanying sheet(s) containing the information required on the HCS 2012 label?
Response: No. Paragraph 1910.1200(f)(1) requires the chemical manufacturer, importer, or distributor to ensure that each container of hazardous chemicals leaving the workplace is labeled, tagged or marked with the following information: (1) a product identifier; (2) signal word; (3) hazard statement(s); (4) pictogram(s); (5) precautionary statement(s); and (6) the name, address, and telephone number of the responsible party. As such, a key or numbering system is not compliant with the HCS 2012 and therefore cannot be used on labels in place of required hazard information for shipped containers.
Question 2: Can NIST apply the same labeling exceptions and exemptions allowed by the Department of Transportation for small quantities and omit the HCS 2012 label from the immediate container and outer packaging?
Response: No, as discussed above, NIST is required to comply with the HCS labeling requirements.
Question 3: Can NIST apply the same exceptions and exemptions allowed under the European Classification, Labelling and Packaging (CLP) regulations?
Response: No. All hazardous chemicals shipped within the United States must comply with the HCS 2012 requirements.
Question 4: If NIST cannot do any of the above labeling options, can we affix the HCS 2012 label on the box containing the ampoules/bottles of the hazardous materials if the ampoules/bottles are too small to have a HCS 2012 label attached?
Response: No. Ampoules/bottles of the hazardous chemical must be labeled with the hazard information required by HCS 2012. While paragraph 1910.1200(c) defines a label as "an appropriate group of written, printed or graphic information elements concerning a hazardous chemical that is affixed to, printed on, or attached to the immediate container of a hazardous chemical, or to the outside packaging," this is merely the definition of what a label is; it was not intended to allow for the labeling of the outside packaging only. OSHA's position is that labels must be attached to a hazardous chemical's immediate container. Therefore, a manufacturer, importer, or distributor may not attach an HCS 2012 label only to the outside packaging of a shipped hazardous chemical.
OSHA understands your concern that HCS 2012 labels contain more information, which may be difficult to include on small shipped containers. As such, labeling can be done with pull-out labels, fold back labels, tags or other methods. While pull-out labels, fold back labels, tags or other methods to attach the label to the shipped container may cost more than traditional glued on labels, an increase in cost is an unacceptable reason to avoid use of these labeling methods. We are including a recent OSHA letter to [Name Withheld] from April 15, 2013, which discusses how tags may be used to label shipped containers.
As a practical accommodation, where the manufacturer can show that it is not feasible to use pull-out labels, fold back labels, or tags, containing the full HCS 2012 required information, the shipped small container (i.e., the actual container holding the hazardous chemical), at a minimum, must contain the following:
   # Product identifier
   # Appropriate pictograms
   # Manufacturer's name and phone number
   # Signal word
   # A statement indicating the full label information for the chemical is provided on the outside package.
Additionally, the outside packaging, at a minimum, must comply with the following:
   # All the applicable label elements, as defined in 29 CFR 1910.1200(f)(1).
   # The outside package must be clearly marked to ensure the complete label elements are visible and it must clearly inform users that the small container must be stored in the outer container bearing the complete label. The complete label must be maintained on the outer package (e.g., not torn, defaced, destroyed).
   # The manufacturer must ensure that any alternative labeling used does not conflict with any other standards. As such, the outside packaging must not present a hazard while the material is being stored.
Example: Category 1 flammable liquid, named High Flam, where the only hazard is the flammability, manufactured by ABC.
 
   # The immediate container would be labeled as follows:
         o High Flam,
         o Flame Pictogram,
         o DANGER,
         o Phone # (123) 456-7890,
         o Full labeling information for High Flam is provided on the outside package.
   # The outside package would contain:
         o High Flam,
         o Flame Pictogram,
         o DANGER,
         o Extremely flammable liquid and vapor, all the precautionary statements (e.g., Store in a well-ventilated place. Keep cool. Keep container tightly closed, see Appendix C, subsection C.4.19 for the full list of precautionary statements that must be present for a category 1 flammable liquid.)
         o ABC 100 Any Street, Any Town, MA 14569
         o Phone # (123) 456-7890.
NOTE: As this is a flammable liquid, the outer packaging MUST not be of a material that is flammable or combustible, 29 CFR 1910.106(d)(2)(i).
OSHA encourages manufacturers, distributors, and importers to add as much information as feasible to the small shipped container labels.
Finally, please note that the December 1, 2015, deadline only applies to distributors. In 29 CFR 1910.1200(c) a distributor is defined as any "business, other than a chemical manufacturer or importer, which supplies hazardous chemicals to other distributors or to employers." Businesses that "produce" chemicals (i.e., manufacture, process, formulate, blend, extract, generate, emit, or repackage chemicals for use or distribution) are considered "chemical manufacturers" under the HCS 2012 and therefore must comply with the HCS 2012 labeling requirements by June 1, 2015. Although your background information describes NIST as a distributor, because NIST "produces" chemicals, NIST would be considered a manufacturer under the HCS 2012. As such, NIST must comply with all the HCS 2012 labeling requirements by June 1, 2015, and include NIST on safety data sheets (SDS) as the chemical manufacturer.
Thank you for your interest in occupational safety and health. We hope you find this information helpful. OSHA's requirements are set by statute, standards, and regulations. Our letters of interpretation do not create new or additional requirements but rather explain these requirements and how they apply to particular circumstances. This letter constitutes OSHA's interpretation of the requirements discussed. From time to time, letters are affected when the Agency updates a standard, a legal decision impacts a standard, or changes in technology affect the interpretation. To assure that you are using the correct information and guidance, please consult OSHA's website at http://www.osha.gov. If you have further questions, please feel free to contact the Office of Health Enforcement at (202) 693-2190.
Sincerely,
Thomas Galassi, Director
Directorate of Enforcement Programs
Attachment

1 In your email, you mention GHS requirements rather than HCS 2012 requirements. Please note, that the GHS is a non-binding system of hazard communication developed through consensus at the United Nations. As such, only the GHS provisions explicitly adopted by OSHA through the HCS 2012 are enforceable. Thus, labels must comply with the HCS 2012 requirements.

