[Federal Register Volume 84, Number 69 (Wednesday, April 10, 2019)]
[Notices]
[Pages 14412-14420]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-07040]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2013-0012]


Proposed Modification to the List of Appropriate NRTL Program 
Test Standards and the Scopes of Recognition of Several NRTLs

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: In this notice, OSHA proposes to: (1) Add new test standards 
to the Nationally Recognized Testing Laboratories (NRTL) Program's list 
of appropriate test standards; (2) delete or replace several test 
standards from the NRTL Program's list of appropriate test standards; 
and (3) update the scope of recognition of several NRTLs.

DATES: Submit comments, information, and documents in response to this 
notice, or request for an extension of time to make a submission, on or 
before May 10, 2019.

ADDRESSES: Submit comments by any of the following methods:
    Electronically: You may submit comments and attachments 
electronically at: https://www.regulations.gov, which is the Federal 
eRulemaking Portal. Follow the instructions online for submitting 
comments.
    Facsimile: If your comments, including attachments, are not longer 
than 10 pages, you may fax them to the OSHA Docket Office at (202) 693-
1648.
    Mail, hand delivery, express mail, messenger, or courier service: 
When using this method, you must submit a copy of your comments and 
attachments to the OSHA Docket Office, Docket No. OSHA-2013-0012, 
Occupational Safety and Health Administration, U.S. Department of 
Labor, Room N-3653, 200 Constitution Avenue NW, Washington, DC 20210. 
Deliveries (hand, express mail, messenger, and courier service) are 
accepted during the Docket Office's normal business hours, 10:00 a.m. 
to 3:00 p.m., ET.
    Instructions: All submissions must include the agency name and the 
OSHA docket number (OSHA-2013-0012). OSHA places comments and other 
materials, including any personal information, in the public docket 
without revision, and these materials will be available online at 
http://www.regulations.gov. Therefore, the agency cautions commenters 
about submitting statements they do not want made available to the 
public, or submitting comments that contain personal information 
(either about themselves or others) such as Social Security Numbers, 
birth dates, and medical data.
    Docket: To read or download comments or other material in the 
docket, go to https://www.regulations.gov or the OSHA Docket Office at 
the above address. All documents in the docket (including this Federal 
Register notice) are listed in the https://www.regulations.gov index; 
however, some information (e.g., copyrighted material) is not publicly 
available to read or download through the website. All submissions, 
including copyrighted material, are available for inspection at the 
OSHA Docket Office.
    Extension of comment period: Submit requests for an extension of 
the comment period on or before April 25, 2019 to the Office of 
Technical Programs and Coordination Activities, Directorate of 
Technical Support and Emergency Management, Occupational Safety and 
Health Administration, U.S. Department of Labor, 200 Constitution 
Avenue NW, Room N-3653, Washington, DC 20210, or by fax to (202) 693-
1644.

FOR FURTHER INFORMATION CONTACT: Information regarding this notice is 
available from the following sources:
    Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office 
of Communications; telephone: (202) 693-1999; email: 
[email protected].
    General and technical information: Contact Mr. Kevin Robinson, 
Director, Office of Technical Programs and Coordination Activities, 
Directorate of Technical Support and Emergency Management, Occupational 
Safety and Health Administration; telephone: (202) 693-2110 or email: 
[email protected]. OSHA's web page includes information about the 
NRTL Program (see http://www.osha.gov/dts/otpca/nrtl/index.html).

SUPPLEMENTARY INFORMATION: 

I. Background

    The NRTL Program recognizes organizations that provide product-
safety testing and certification services to manufacturers. These 
organizations

[[Page 14413]]

perform testing and certification for purposes of the program, to U.S. 
consensus-based product-safety test standards. The products covered by 
the NRTL Program consist of those items for which OSHA safety standards 
require ``certification'' by a NRTL. The requirements affect electrical 
products and 38 other types of products. OSHA does not develop or issue 
these test standards, but generally relies on standards development 
organizations (SDO), which develop and maintain the standards using a 
method that provides input and consideration of views of industry 
groups, experts, users, consumers, governmental authorities, and others 
having broad experience in the safety field involved.

Addition of New Test Standards to the NRTL List of Appropriate Test 
Standards

    Periodically, OSHA will add new test standards to the NRTL list of 
appropriate test standards following an evaluation of the test standard 
document. To qualify as an appropriate test standard, the agency 
evaluates the document to (1) verify it represents a product category 
for which OSHA requires certification by a NRTL, (2) verify the 
document represents an end product and not a component, and (3) verify 
the document defines safety test specifications (not installation or 
operational performance specifications). OSHA becomes aware of new test 
standards through various avenues. For example, OSHA may become aware 
of new test standards by: (1) Monitoring notifications issued by 
certain SDO; (2) reviewing applications by NRTLs or applicants seeking 
recognition to include a new test standard in their scopes of 
recognition; and (3) obtaining notification from manufacturers, 
manufacturing organizations, government agencies, or other parties that 
a new test standard may be appropriate to add to the list of 
appropriate standards. OSHA may determine to include a new test 
standard in the list, for example, if the test standard is for a 
particular type of product that another test standard also covers, 
addresses a type of product that no standard previously covered, or is 
otherwise new to the NRTL Program.

SDO Deletion and Replacement of Test Standards

    The NRTL Program regulations require that appropriate test 
standards be maintained and current (29 CFR 1910.7(c)). A test standard 
withdrawn by a standards development organization is no longer 
considered an appropriate test standard (Directive, App. C.XIV.B). It 
is OSHA's policy to remove recognition of withdrawn test standards by 
issuing a correction notice in the Federal Register for all NRTLs 
recognized for the withdrawn test standards. However, SDOs frequently 
will designate a replacement standard for withdrawn standards. OSHA 
will recognize a NRTL for an appropriate replacement test standard if 
the NRTL has the requisite testing and evaluation capability for the 
replacement test standard.
    One method that NRTLs may use to show such capability involves an 
analysis to determine whether any testing and evaluation requirements 
of existing test standards in a NRTL's scope are comparable (i.e., are 
completely or substantially identical) to the requirements in the 
replacement test standard. If OSHA's analysis shows the replacement 
test standard does not require additional or different technical 
capability than an existing test standard(s), the replacement test 
standard is comparable to the existing test standard(s), then OSHA can 
add the replacement test standard to affected NRTLs' scopes of 
recognition. If OSHA's analysis shows the replacement test standard 
requires an additional or different technical capability, or the 
replacement test standard is not comparable to any existing test 
standards, each affected NRTL seeking to have OSHA add the replacement 
test standard to the NRTL's scope of recognition must provide 
information to OSHA that demonstrates technical capability.

Other Reasons for Removal of Test Standards From the NRTL List of 
Appropriate Test Standards

    OSHA may choose to remove a test standard from the NRTL list of 
appropriate test standards based on an internal review in which NRTL 
Program staff review the NRTL list of appropriate test standards to 
determine if the test standards conform to the definition of an 
appropriate test standard defined in NRTL Program regulations and 
policy. There are several reasons for removing a test standard based on 
this review. First, a document that provides the methodology for a 
single test is a test method rather than an appropriate test standard 
(29 CFR 1910.7(c)). As stated above, a test standard must specify the 
safety requirements for a specific type of product(s). A test method, 
however, is a ``specified technical procedure for performing a test'' 
(Directive, App. B). As such, a test method is not an appropriate test 
standard. While a NRTL may use a test method to determine if certain 
safety requirements are met, a test method is not itself a safety 
requirement for a specific product category.
    Second, a document that focuses primarily on usage, installation, 
or maintenance requirements would also not be considered an appropriate 
test standard (Directive, App. D.IV.B). In some cases, however, a 
document may also provide safety test specifications in addition to 
usage, installation, and maintenance requirements. In such cases, the 
document would be retained as an appropriate test standard based on the 
safety test specifications.
    Finally, a document may not be considered an appropriate test 
standard if the document covers products for which OSHA does not 
require testing and certification (Directive, App. D.IV.A). Similarly, 
a document that covers electrical product components would not be 
considered an appropriate test standard. These documents apply to types 
of components that have limitation(s) or condition(s) on their use, 
which are not appropriate for use as end-use products. These documents 
also specify that these types of components are for use only as part of 
an end-use product. NRTLs, however, evaluate such components only in 
the context of evaluating whether end-use products requiring NRTL 
approval are safe for use in the workplace. Testing such components 
alone would not indicate that the end-use products containing the 
components are safe for use. Accordingly, as a matter of policy, OSHA 
considers that documents covering such components are not appropriate 
test standards under the NRTL Program. OSHA notes, however, that it is 
not proposing to delete from NRTLs' scopes of recognition any test 
standards covering end-use products that contain such components.
    In addition, OSHA notes that, to conform to a test standard 
covering an end-use product, a NRTL must still determine that the 
components in the product comply with the components' specific test 
standards. In making this determination, NRTLs may test the components 
themselves, or accept the testing of a qualified testing organization 
that a given component conforms to the particular test standard. OSHA 
reviews each NRTL's procedures to determine which approach the NRTL 
will use to address components, and reviews the end-use product testing 
to verify the NRTL appropriately addresses that product's components.

[[Page 14414]]

II. Proposal To Remove Test Standards to the NRTL Program's List of 
Appropriate Test Standards

    In this notice, OSHA proposes to delete several withdrawn and 
deleted test standards from the NRTL Program's list of appropriate test 
standards. OSHA proposes to incorporate into the NRTL Program's list of 
appropriate test standards replacement test standards for some of the 
withdrawn and deleted test standards.
    Table 1 lists the test standards that OSHA proposes to delete from 
the NRTL Program's List of Appropriate Test Standards, as well as an 
abbreviated rationale for OSHA's proposed action. Additionally, Table 1 
lists corresponding replacement test standards that OSHA proposes to 
incorporate into the NRTL Program's List of Appropriate Test Standards 
(when applicable). OSHA seeks comment on this preliminary 
determination.
    OSHA notes that Table 1 lists the subject test standards and the 
proposed action with regard to each of these test standards without 
indicating how the proposed action will affect individual NRTLs. 
Section IV of this notice discusses how the proposed action will affect 
individual NRTLs.

 Table 1--Test Standards OSHA Is Proposing To Remove From NRTL Program's
                   List of Appropriate Test Standards
------------------------------------------------------------------------
                                                             Proposed
Proposed deleted test   Test standard      Reason for      replacement
       standard             title           deletion       standard(s)
------------------------------------------------------------------------
ANSI C37.44..........  Distribution     Withdrawn......  None.
                        Oil Cutouts
                        and Fuse Links.
IEEE C37.09..........  Standard Test    Withdrawn......  None.
                        Procedure for
                        High-Voltage
                        Circuit
                        Breakers Rated
                        on a
                        Symmetrical
                        Current Basis.
IEEE C37.29..........  Low-Voltage AC   Withdrawn......  None.
                        Power Circuit
                        Protectors
                        Used in
                        Enclosures.
IEEE C37.45..........  Distribution     Withdrawn......  None.
                        Enclosed
                        Single-Pole
                        Air Switches.
NEMA C37.52..........  Low-Voltage AC   Withdrawn......  None.
                        Power Circuit
                        Protectors
                        Used in
                        Enclosures--Te
                        st Procedures.
IEEE C37.53..........  High-Voltage     Withdrawn......  None.
                        Current Motor-
                        Starter Fuses--
                        Conformance
                        Test
                        Procedures.
ISA 82.02.01.........  Electric and     Withdrawn......  None.
                        Electronic
                        Test,
                        Measuring,
                        Controlling
                        and Related
                        Equipment:
                        General
                        Requirement.
UL 1093..............  Halogenated      Withdrawn......  None.
                        Agent Fire
                        Extinguishers.
UL 1244..............  Electrical and   Withdrawn......  None.
                        Electronic
                        Measuring and
                        Testing
                        Equipment.
UL 1448..............  Electric Hedge   Withdrawn and    UL 60745-2-15
                        Trimmers.        replaced.        Particular
                                                          Requirements
                                                          for Hedge
                                                          Trimmers.
ISA 60079-2..........  Explosive        Withdrawn and    UL 60079-2
                        Atmospheres--P   replaced.        Explosive
                        art 2:                            Atmospheres--P
                        Equipment                         art 2:
                        Protection by                     Protection by
                        Pressurized                       Pressurized
                        Enclosures                        Enclosures
                        ``p''.                            ``p''.
ISA 60079-5..........  Explosive        Withdrawn and    UL 60079-5
                        Atmospheres--P   replaced.        Explosive
                        art 5:                            Atmospheres--P
                        Equipment                         art 5:
                        Protection by                     Equipment
                        Powder Filling                    Protection by
                        ``q''.                            Powder Filling
                                                          ``q''.
ISA 60079-18.........  Explosive        Withdrawn and    UL 60079-18
                        Atmospheres--P   replaced.        Explosive
                        art 18:                           Atmospheres--P
                        Equipment                         art 18:
                        Protection by                     Equipment
                        Encapsulation                     Protection by
                        ``m''.                            Encapsulation
                                                          ``m''.
ISA 60079-26.........  Explosive        Withdrawn and    UL 60079-26
                        Atmospheres--P   replaced.        Explosive
                        art 26:                           Atmospheres--P
                        Equipment for                     art 26:
                        Use in Class                      Equipment for
                        I, Zone 0                         Use in Class
                        Hazardous                         I, Zone 0
                        (Classified)                      Hazardous
                        Locations.                        (Classified)
                                                          Locations.
UL 745-1.............  Portable         Withdrawn......  None.
                        Electric Tools.
UL 745-2.............  Particular       Withdrawn......  None.
                        Requirements
                        of Drills.
UL 745-2-3...........  Particular       Withdrawn......  None.
                        Requirements
                        for Grinders,
                        Polishers and
                        Disk-Type
                        Sanders.
UL 745-2-17..........  Particular       Withdrawn......  None.
                        Requirements
                        for Circular
                        Saws and
                        Circular
                        Knives.
UL 745-2-36..........  Particular       Withdrawn......  None.
                        Requirements
                        for Hand Motor
                        Tools.
UL 745-2-37..........  Particular       Withdrawn......  None.
                        Requirements
                        for Plate
                        Jointers.
UL 61010A-1..........  Electrical       Withdrawn and    UL 61010-1
                        Equipment for    replaced.        Electrical
                        Laboratory                        Equipment for
                        Use; Part 1:                      Measurement,
                        General                           Control and
                        Requirements.                     Laboratory
                                                          Use; Part 1:
                                                          General
                                                          Requirements.
UL 61010A-2-010......  Electrical       Withdrawn and    UL 61010-2-010
                        Equipment for    replaced.        Electrical
                        Laboratory                        Equipment for
                        Use; Part 2:                      Measurement,
                        Particular                        Control and
                        Requirements                      Laboratory
                        for the                           Use--Part 2-
                        Heating of                        010:
                        Materials.                        Particular
                                                          Requirements
                                                          for Laboratory
                                                          Equipment for
                                                          the Heating of
                                                          Materials.
UL 61010A-2-020......  Electrical       Withdrawn and    UL 61010-2-020
                        Equipment for    replaced.        Electrical
                        Laboratory                        Equipment for
                        Use; Part 2:                      Measurement,
                        Particular                        Control, and
                        Requirements                      Laboratory
                        for Laboratory                    Use--Part 2-
                        Centrifuges.                      020:
                                                          Particular
                                                          Requirements
                                                          for Laboratory
                                                          Centrifuges.
UL 61010A-2-041......  Electrical       Withdrawn and    UL 61010-1 (no
                        Equipment for    replaced.        direct
                        Laboratory                        replacement).
                        Use: Part 2:
                        Particular
                        Requirements
                        for Autoclaves
                        Using Steam
                        for the
                        Treatment of
                        Medical
                        Materials for
                        Laboratory
                        Purposes.
UL 61010A-2-051......  Electrical       Withdrawn and    UL 61010-2-051
                        Equipment for    replaced.        Electrical
                        Laboratory                        Equipment for
                        Use; Part 2:                      Measurement,
                        Particular                        Control and
                        Requirements                      Laboratory
                        for Laboratory                    Use--Part 2-
                        Equipment                         051:
                        Mixing and                        Particular
                        Stirring.                         Requirements
                                                          for Laboratory
                                                          Equipment for
                                                          Mixing and
                                                          Stirring.

[[Page 14415]]

 
UL 61010A-2-061......  Electrical       Withdrawn and    UL 61010-2-061
                        Equipment for    replaced.        Electrical
                        Laboratory                        Equipment for
                        Use: Part 2:                      Measurement,
                        Particular                        Control and
                        Requirements                      Laboratory
                        for Laboratory                    Use--Part 2-
                        Atomic                            061:
                        Spectrometers                     Particular
                        with Thermal                      Requirements
                        Atomization                       for Laboratory
                        and Ionization.                   Atomic
                                                          Spectrometers
                                                          with Thermal
                                                          Atomization
                                                          and
                                                          Ionization.
UL 61010B-1..........  Electrical       Withdrawn and    UL 61010-1
                        Measuring and    replaced.        Electrical
                        Test                              Equipment for
                        Equipment;                        Measurement,
                        Part 1:                           Control and
                        General                           Laboratory
                        Requirements.                     Use; Part 1:
                                                          General
                                                          Requirements.
UL 61010B-2-031......  Electrical       Withdrawn and    UL 61010-1 (no
                        Equipment for    replaced.        direct
                        Measurement,                      replacement).
                        Control and
                        Laboratory
                        Use: Part 2:
                        Particular
                        Requirements
                        for Hand-Held
                        Probe
                        Assemblies for
                        Electrical
                        Measurement
                        and Test.
UL 61010C-1..........  Process Control  Withdrawn and    UL 61010-1
                        Equipment.       replaced.        Electrical
                                                          Equipment for
                                                          Measurement,
                                                          Control and
                                                          Laboratory
                                                          Use; Part 1:
                                                          General
                                                          Requirements.
------------------------------------------------------------------------

III. Proposed Modifications to Affected NRTLs' Scopes of Recognition

    In this notice, OSHA additionally proposes to update the scopes of 
recognition of several NRTLs with a replacement for the test standard 
OSHA proposes to remove. The tables in this section (Table 2 thru Table 
9) list, for each affected NRTL, the test standard(s) that OSHA 
proposes to remove from the scope of recognition of the NRTL along with 
the proposed replacement test standard (if any).
    OSHA seeks comment on whether its proposed deletion and replacement 
are appropriate, and whether individual tables omit any appropriate 
replacement test standard that is comparable to a withdrawn test 
standard. If OSHA determines that it omitted any appropriate 
replacement test standard that is comparable to a withdrawn test 
standard, it will, in its final determination, incorporate that 
replacement test standard into the scope of recognition of each 
affected NRTL.
    Comments should consist of pertinent written documents and 
exhibits. Commenters needing more time to comment must submit a request 
in writing, stating the reasons for the request, by the due date for 
comments. OSHA will limit any extension to 10 days unless the requester 
justifies a longer time period. OSHA may deny a request for an 
extension if it is not adequately justified.

    Table 2--Test Standards OSHA Proposes To Remove From the Scope of
            Recognition of the Canadian Standards Association
------------------------------------------------------------------------
                                                    Proposed replacement
Proposed test standard to be   Reason for proposed  test standard(s) (if
           removed                   removal             applicable)
------------------------------------------------------------------------
UL 61010A-2-020--Electrical   Standard withdrawn    UL 61010-2-020--
 Equipment for Laboratory      by Standards          Standard for Safety
 Use; Part 2: Particular       Organization.         Requirements for
 Requirements for Laboratory                         Electrical
 Equipment for Laboratory                            Equipment for
 Centrifuges.                                        Laboratory Use;
                                                     Part 2-020:
                                                     Particular
                                                     Requirements for
                                                     Laboratory
                                                     Equipment for
                                                     Laboratory
                                                     Centrifuges.
IEEE C37.09 Standard Test     Withdrawn...........  None.
 Procedure for AC High-
 Voltage Circuit Breakers
 Rated on a Symmetrical
 Current Basis.
IEEE C37.29 Low-Voltage AC    Withdrawn...........  None.
 Power Circuit Protectors
 Used in Enclosures.
IEEE C37.45 Distribution      Withdrawn...........  None.
 Enclosed Single-Pole Air
 Switches.
NEMA C37.52 Low-Voltage AC    Withdrawn...........  None.
 Power Circuit Protectors
 Used in Enclosures--Test
 Procedures.
ISA 82.02.01 Electric and     Withdrawn...........  None.
 Electronic Test, Measuring,
 Controlling and Related
 Equipment: General
 Requirement.
UL 1244.....................  Withdrawn...........  None.
UL 1448.....................  Withdrawn and         UL 60745-2-15
                               Replaced.             Particular
                                                     Requirements for
                                                     Hedge Trimmers.
ISA 60079-2 Explosive         Withdrawn and         UL 60079-2 Explosive
 Atmospheres--Part 2:          replaced.             Atmospheres--Part
 Equipment Protection by                             2: Equipment
 Pressurized Enclosures                              Protection by
 ``p''.                                              Pressurized
                                                     Enclosures ``p''.
ISA 60079-5 Explosive         Withdrawn and         UL 60079-5 Explosive
 Atmospheres--Part 5:          replaced.             Atmospheres--Part
 Equipment Protection by                             5: Equipment
 Power Filling ``q''.                                Protection by
                                                     Powder Filling
                                                     ``q''.
ISA 60079-18 Explosive        Withdrawn and         UL 60079-18
 Atmospheres--Part 18:         replaced.             Explosive
 Equipment Protection by                             Atmospheres--Part
 Encapsulation ``m''.                                18: Equipment
                                                     Protection by
                                                     Encapsulation
                                                     ``m''.
ISA 60079-26 Explosive        Withdrawn and         UL 60079-26
 Atmospheres--Part 26:         replaced.             Explosive
 Equipment for Use in Class                          Atmospheres--Part
 I, Zone 0 Hazardous                                 26: Equipment for
 (Classified) Locations.                             Use in Class I,
                                                     Zone 0 Hazardous
                                                     (Classified)
                                                     Locations.
UL 745-1 Portable Electric    Withdrawn...........  None.
 Tools.
UL 745-2-1 Particular         Withdrawn...........  None.
 Requirements of Drills.
UL 745-2-5 Particular         Withdrawn...........  None.
 Requirements for Circular
 Saws and Circular Knives.
UL 745-2-17 Particular        Withdrawn...........  None.
 Requirements for Routers
 and Trimmers.
UL 745-2-36 Particular        Withdrawn...........  None.
 Requirements for Hand Motor
 Tools.

[[Page 14416]]

 
UL 745-2-37 Particular        Withdrawn...........  None.
 Requirements for Plate
 Jointers.
UL 61010A-1 Electrical        Withdrawn and         UL 61010-1
 Equipment for Laboratory      replaced.             Electrical
 Use; Part 1: General                                Equipment for
 Requirements.                                       Measurement,
                                                     Control and
                                                     Laboratory Use;
                                                     Part 1: General
                                                     Requirements.
UL 61010A-2-010 Electrical    Withdrawn and         UL 61010-2-010
 Equipment for Laboratory      replaced.             Electrical
 Use; Part 2: Particular                             Equipment for
 Requirements for the                                Measurement,
 Heating of Materials.                               Control and
                                                     Laboratory Use--
                                                     Part 2-010:
                                                     Particular
                                                     Requirements for
                                                     Laboratory
                                                     Equipment for the
                                                     Heating of
                                                     Materials.
UL 61010A-2-020 Electrical    Withdrawn and         UL 61010-2-020
 Equipment for Laboratory      replaced.             Electrical
 Use; Part 2: Particular                             Equipment for
 Requirements for Laboratory                         Measurement,
 Centrifuges.                                        Control, and
                                                     Laboratory Use--
                                                     Part 2-020:
                                                     Particular
                                                     Requirements for
                                                     Laboratory
                                                     Centrifuges.
UL 61010A-2-041 Electrical    Withdrawn and         UL 61010-1 (no
 Equipment for Laboratory      replaced.             direct
 Use: Part 2: Particular                             replacement).
 Requirements for Autoclaves
 Using Steam for the
 Treatment of Medical
 Materials for Laboratory
 Purposes.
UL 61010A-2-051 Electrical    Withdrawn and         UL 61010-2-051
 Equipment for Laboratory      replaced.             Electrical
 Use; Part 2: Particular                             Equipment for
 Requirements for Laboratory                         Measurement,
 Equipment Mixing and                                Control and
 Stirring.                                           Laboratory Use--
                                                     Part 2-051:
                                                     Particular
                                                     Requirements for
                                                     Laboratory
                                                     Equipment for
                                                     Mixing and
                                                     Stirring.
UL 61010A-2-061 Electrical    Withdrawn and         UL 61010-2-061
 Equipment for Laboratory      replaced.             Electrical
 Use: Part 2: Particular                             Equipment for
 Requirements for Laboratory                         Measurement,
 Atomic Spectrometers with                           Control and
 Thermal Atomization and                             Laboratory Use--
 Ionization.                                         Part 2-061:
                                                     Particular
                                                     Requirements for
                                                     Laboratory Atomic
                                                     Spectrometers with
                                                     Thermal Atomization
                                                     and Ionization.
UL 61010B-1 Electrical        Withdrawn and         UL 61010-1
 Measuring and Test            replaced.             Electrical
 Equipment; Part 1: General                          Equipment for
 Requirements.                                       Measurement,
                                                     Control and
                                                     Laboratory Use;
                                                     Part 1: General
                                                     Requirements.
UL 61010B-2-031 Electrical    Withdrawn and         UL 61010-1 (no
 Equipment for Measurement,    replaced.             direct
 Control and Laboratory Use:                         replacement).
 Part 2: Particular
 Requirements for Hand-Held
 Probe Assemblies for
 Electrical Measurement and
 Test.
UL 61010C-1 Process Control   Withdrawn and         UL 61010-1
 Equipment.                    replaced.             Electrical
                                                     Equipment for
                                                     Measurement,
                                                     Control and
                                                     Laboratory Use;
                                                     Part 1: General
                                                     Requirements.
------------------------------------------------------------------------


    Table 3--Test Standard OSHA Proposes To Remove From the Scope of
                     Recognition of FM Approvals LLC
------------------------------------------------------------------------
                                                    Proposed replacement
Proposed test standard to be   Reason for proposed  test standard(s) (if
           removed                   removal             applicable)
------------------------------------------------------------------------
UL 1093.....................  Withdrawn...........  None.
ISA 82.02.01 Electric and     Withdrawn...........  None.
 Electronic Test, Measuring,
 Controlling and Related
 Equipment: General
 Requirement.
UL 61010A-1 Electrical        Withdrawn and         UL 61010-1
 Equipment for Laboratory      replaced.             Electrical
 Use; Part 1: General                                Equipment for
 Requirements.                                       Measurement,
                                                     Control and
                                                     Laboratory Use;
                                                     Part 1: General
                                                     Requirements.
UL 61010B-1 Electrical        Withdrawn and         UL 61010-1
 Measuring and Test            replaced.             Electrical
 Equipment; Part 1: General                          Equipment for
 Requirements.                                       Measurement,
                                                     Control and
                                                     Laboratory Use;
                                                     Part 1: General
                                                     Requirements.
------------------------------------------------------------------------


    Table 4--Test Standard OSHA Proposes To Remove From the Scope of
              Recognition of Intertek Testing Services, NA
------------------------------------------------------------------------
                                                    Proposed replacement
Proposed test standard to be   Reason for proposed  test standard(s) (if
           removed                   removal             applicable)
------------------------------------------------------------------------
UL 61010A-2-020--Electrical   Standard withdrawn    UL 61010-2-020--
 Equipment for Laboratory      by Standards          Standard for Safety
 Use; Part 2: Particular       Organization.         Requirements for
 Requirements for Laboratory                         Electrical
 Equipment for Laboratory                            Equipment for
 Centrifuges.                                        Laboratory Use;
                                                     Part 2-020:
                                                     Particular
                                                     Requirements for
                                                     Laboratory
                                                     Centrifuges.
IEEE C37.29 Low-Voltage AC    Withdrawn...........  None.
 Power Circuit Protectors
 Used in Enclosures.
ISA 82.02.01 Electric and     Withdrawn...........  None.
 Electronic Test, Measuring,
 Controlling and Related
 Equipment: General
 Requirement.
UL 1093 Halogenated Agent     Withdrawn...........  None.
 Fire Extinguishers.
UL 1244 Electrical and        Withdrawn...........  None.
 Electronic Measuring and
 Testing Equipment.
UL 1448 Electric Hedge        Withdrawn and         UL 60745-2-15
 Trimmers.                     Replaced.             Particular
                                                     Requirements for
                                                     Hedge Trimmers.
ISA 60079-2 Explosive         Withdrawn and         UL 60079-2 Explosive
 Atmospheres--Part 2:          replaced.             Atmospheres--Part
 Equipment Protection by                             2: Equipment
 Pressurized Enclosures                              Protection by
 ``p''.                                              Pressurized
                                                     Enclosures ``p''.

[[Page 14417]]

 
ISA 60079-5 Explosive         Withdrawn and         UL 60079-5 Explosive
 Atmospheres--Part 5:          replaced.             Atmospheres--Part
 Equipment Protection by                             5: Equipment
 Power Filling ``q''.                                Protection by
                                                     Powder Filling
                                                     ``q''.
ISA 60079-18 Explosive        Withdrawn and         UL 60079-18
 Atmospheres--Part 18:         replaced.             Explosive
 Equipment Protection by                             Atmospheres--Part
 Encapsulation ``m''.                                18: Equipment
                                                     Protection by
                                                     Encapsulation
                                                     ``m''.
ISA 60079-26 Explosive        Withdrawn and         UL 60079-26
 Atmospheres--Part 26:         replaced.             Explosive
 Equipment for Use in Class                          Atmospheres--Part
 I, Zone 0 Hazardous                                 26: Equipment for
 (Classified) Locations.                             Use in Class I,
                                                     Zone 0 Hazardous
                                                     (Classified)
                                                     Locations.
UL 745-1 Portable Electric    Withdrawn...........  None.
 Tools.
UL 745-2-1 Particular         Withdrawn...........  None.
 Requirements of Drills.
UL 745-2-5 Particular         Withdrawn...........  None.
 Requirements for Circular
 Saws and Circular Knives.
UL 745-2-17 Particular        Withdrawn...........  None.
 Requirements for Routers
 and Trimmers.
UL 745-2-36 Particular        Withdrawn...........  None.
 Requirements for Hand Motor
 Tools.
UL 745-2-37 Particular        Withdrawn...........  None.
 Requirements for Plate
 Jointers.
UL 61010A-1 Electrical        Withdrawn and         UL 61010-1
 Equipment for Laboratory      replaced.             Electrical
 Use; Part 1: General                                Equipment for
 Requirements.                                       Measurement,
                                                     Control and
                                                     Laboratory Use;
                                                     Part 1: General
                                                     Requirements.
UL 61010A-2-010 Electrical    Withdrawn and         UL 61010-2-010
 Equipment for Laboratory      replaced.             Electrical
 Use; Part 2: Particular                             Equipment for
 Requirements for the                                Measurement,
 Heating of Materials.                               Control and
                                                     Laboratory Use--
                                                     Part 2-010:
                                                     Particular
                                                     Requirements for
                                                     Laboratory
                                                     Equipment for the
                                                     Heating of
                                                     Materials.
UL 61010A-2-020 Electrical    Withdrawn and         UL 61010-2-020
 Equipment for Laboratory      replaced.             Electrical
 Use; Part 2: Particular                             Equipment for
 Requirements for Laboratory                         Measurement,
 Centrifuges.                                        Control, and
                                                     Laboratory Use--
                                                     Part 2-020:
                                                     Particular
                                                     Requirements for
                                                     Laboratory
                                                     Centrifuges.
UL 61010A-2-041 Electrical    Withdrawn and         UL 61010-1 (no
 Equipment for Laboratory      replaced.             direct
 Use: Part 2: Particular                             replacement).
 Requirements for Autoclaves
 Using Steam for the
 Treatment of Medical
 Materials for Laboratory
 Purposes.
UL 61010A-2-051 Electrical    Withdrawn and         UL 61010-2-051
 Equipment for Laboratory      replaced.             Electrical
 Use; Part 2: Particular                             Equipment for
 Requirements for Laboratory                         Measurement,
 Equipment Mixing and                                Control and
 Stirring.                                           Laboratory Use--
                                                     Part 2-051:
                                                     Particular
                                                     Requirements for
                                                     Laboratory
                                                     Equipment for
                                                     Mixing and
                                                     Stirring.
UL 61010A-2-061 Electrical    Withdrawn and         UL 61010-2-061
 Equipment for Laboratory      replaced.             Electrical
 Use: Part 2: Particular                             Equipment for
 Requirements for Laboratory                         Measurement,
 Atomic Spectrometers with                           Control and
 Thermal Atomization and                             Laboratory Use--
 Ionization.                                         Part 2-061:
                                                     Particular
                                                     Requirements for
                                                     Laboratory Atomic
                                                     Spectrometers with
                                                     Thermal Atomization
                                                     and Ionization.
UL 61010B-1 Electrical        Withdrawn and         UL 61010-1
 Measuring and Test            replaced.             Electrical
 Equipment; Part 1: General                          Equipment for
 Requirements.                                       Measurement,
                                                     Control and
                                                     Laboratory Use;
                                                     Part 1: General
                                                     Requirements.
UL 61010B-2-031 Electrical    Withdrawn and         UL 61010-1 (no
 Equipment for Measurement,    replaced.             direct
 Control and Laboratory Use:                         replacement).
 Part 2: Particular
 Requirements for Hand-Held
 Probe Assemblies for
 Electrical Measurement and
 Test.
UL 61010C-1 Process Control   Withdrawn and         UL 61010-1
 Equipment.                    replaced.             Electrical
                                                     Equipment for
                                                     Measurement,
                                                     Control and
                                                     Laboratory Use;
                                                     Part 1: General
                                                     Requirements.
------------------------------------------------------------------------


    Table 5--Test Standard OSHA Proposes To Remove From the Scope of
                  Recognition of MET Laboratories, Inc.
------------------------------------------------------------------------
                                                    Proposed replacement
Proposed test standard to be   Reason for proposed  test standard(s) (if
           removed                   removal             applicable)
------------------------------------------------------------------------
UL 1448 Electric Edge         Withdrawn and         UL 60745-2-15
 Trimmers.                     Replaced.             Particular
                                                     Requirements for
                                                     Hedge Trimmers.
UL 1244 Electrical and        Withdrawn...........  None.
 Electronic Measuring and
 Testing Equipment.
UL 61010A-1 Electrical        Withdrawn and         UL 61010-1
 Equipment for Laboratory      replaced.             Electrical
 Use; Part 1: General                                Equipment for
 Requirements.                                       Measurement,
                                                     Control and
                                                     Laboratory Use;
                                                     Part 1: General
                                                     Requirements.
UL 61010B-1 Electrical        Withdrawn and         UL 61010-1
 Measuring and Test            replaced.             Electrical
 Equipment; Part 1: General                          Equipment for
 Requirements.                                       Measurement,
                                                     Control and
                                                     Laboratory Use;
                                                     Part 1: General
                                                     Requirements.
UL 61010C-1 Process Control   Withdrawn and         UL 61010-1
 Equipment.                    replaced.             Electrical
                                                     Equipment for
                                                     Measurement,
                                                     Control and
                                                     Laboratory Use;
                                                     Part 1: General
                                                     Requirements.
------------------------------------------------------------------------


[[Page 14418]]


    Table 6--Test Standard OSHA Proposes To Remove From the Scope of
           Recognition of TUV Rheinland of North America, Inc.
------------------------------------------------------------------------
                                                    Proposed replacement
Proposed test standard to be   Reason for proposed  test standard(s) (if
           removed                   removal             applicable)
------------------------------------------------------------------------
UL 1448.....................  Withdrawn and         UL 60745-2-15
                               replaced.             Particular
                                                     Requirements for
                                                     Hedge Trimmers.
UL 745-1 Portable Electric    Withdrawn...........  None.
 Tools.
UL 745-2-1 Particular         Withdrawn...........  None.
 Requirements of Drills.
UL 745-2-5 Particular         Withdrawn...........  None.
 Requirements for Circular
 Saws and Circular Knives.
UL 745-2-17 Particular        Withdrawn...........  None.
 Requirements for Routers
 and Trimmers.
UL 745-2-36 Particular        Withdrawn...........  None.
 Requirements for Hand Motor
 Tools.
UL 745-2-37 Particular        Withdrawn...........  None.
 Requirements for Plate
 Jointers.
UL 61010A-1 Electrical        Withdrawn and         UL 61010-1
 Equipment for Laboratory      replaced.             Electrical
 Use; Part 1: General                                Equipment for
 Requirements.                                       Measurement,
                                                     Control and
                                                     Laboratory Use;
                                                     Part 1: General
                                                     Requirements.
UL 61010B-1 Electrical        Withdrawn and         UL 61010-1
 Measuring and Test            replaced.             Electrical
 Equipment; Part 1: General                          Equipment for
 Requirements.                                       Measurement,
                                                     Control and
                                                     Laboratory Use;
                                                     Part 1: General
                                                     Requirements.
UL 61010C-1 Process Control   Withdrawn and         UL 61010-1
 Equipment.                    replaced.             Electrical
                                                     Equipment for
                                                     Measurement,
                                                     Control and
                                                     Laboratory Use;
                                                     Part 1: General
                                                     Requirements.
------------------------------------------------------------------------


    Table 7--Test Standard OSHA Proposes To Remove From the Scope of
                  Recognition of TUV SUD America, Inc.
------------------------------------------------------------------------
                                                    Proposed replacement
Proposed test standard to be   Reason for proposed  test standard(s) (if
           remove                    removal             applicable)
------------------------------------------------------------------------
UL 61010A-2-020--Electrical   Standard withdrawn    UL 61010-2-020--
 Equipment for Laboratory      by Standards          Standard for Safety
 Use; Part 2: Particular       Organization.         Requirements for
 Requirements for Laboratory                         Electrical
 Equipment for Laboratory                            Equipment for
 Centrifuges.                                        Laboratory Use;
                                                     Part 2-020:
                                                     Particular
                                                     Requirements for
                                                     Laboratory
                                                     Centrifuges.
UL 1448.....................  Withdrawn and         UL 60745-2-15
                               replaced.             Particular
                                                     Requirements for
                                                     Hedge Trimmers.
UL 745-1 Portable Electric    Withdrawn...........  None.
 Tools.
UL 745-2-1 Particular         Withdrawn...........  None.
 Requirements of Drills.
UL 745-2-5 Particular         Withdrawn...........  None.
 Requirements for Circular
 Saws and Circular Knives.
UL 745-2-17 Particular        Withdrawn...........  None.
 Requirements for Routers
 and Trimmers.
UL 745-2-36 Particular        Withdrawn...........  None.
 Requirements for Hand Motor
 Tools.
UL 745-2-37 Particular        Withdrawn...........  None.
 Requirements for Plate
 Jointers.
UL 61010A-1 Electrical        Withdrawn and         UL 61010-1
 Equipment for Laboratory      replaced.             Electrical
 Use; Part 1: General                                Equipment for
 Requirements.                                       Measurement,
                                                     Control and
                                                     Laboratory Use;
                                                     Part 1: General
                                                     Requirements.
UL 61010A-2-010 Electrical    Withdrawn and         UL 61010-2-010.
 Equipment for Laboratory      replaced.
 Use; Part 2: Particular
 Requirements for the
 Heating of Materials.
UL 61010A-2-020 Electrical    Withdrawn and         UL 61010-2-010
 Equipment for Laboratory      replaced.             Electrical
 Use; Part 2: Particular                             Equipment for
 Requirements for Laboratory                         Measurement,
 Centrifuges.                                        Control and
                                                     Laboratory Use--
                                                     Part 2-010:
                                                     Particular
                                                     Requirements for
                                                     Laboratory
                                                     Equipment for the
                                                     Heating of
                                                     Materials.
UL 61010A-2-041 Electrical    Withdrawn and         UL 61010-1 (no
 Equipment for Laboratory      replaced.             direct
 Use: Part 2: Particular                             replacement).
 Requirements for Autoclaves
 Using Steam for the
 Treatment of Medical
 Materials for Laboratory
 Purposes.
UL 61010A-2-051 Electrical    Withdrawn and         UL 61010-2-051
 Equipment for Laboratory      replaced.             Electrical
 Use; Part 2: Particular                             Equipment for
 Requirements for Laboratory                         Measurement,
 Equipment Mixing and                                Control and
 Stirring.                                           Laboratory Use--
                                                     Part 2-051:
                                                     Particular
                                                     Requirements for
                                                     Laboratory
                                                     Equipment for
                                                     Mixing and
                                                     Stirring.
UL 61010A-2-061 Electrical    Withdrawn and         UL 61010-2-061
 Equipment for Laboratory      replaced.             Electrical
 Use: Part 2: Particular                             Equipment for
 Requirements for Laboratory                         Measurement,
 Atomic Spectrometers with                           Control and
 Thermal Atomization and                             Laboratory Use--
 Ionization.                                         Part 2-061:
                                                     Particular
                                                     Requirements for
                                                     Laboratory Atomic
                                                     Spectrometers with
                                                     Thermal Atomization
                                                     and Ionization.
UL 61010B-1 Electrical        Withdrawn and         UL 61010-1
 Measuring and Test            replaced.             Electrical
 Equipment; Part 1: General                          Equipment for
 Requirements.                                       Measurement,
                                                     Control and
                                                     Laboratory Use;
                                                     Part 1: General
                                                     Requirements.
UL 61010B-2-031 Electrical    Withdrawn and         UL 61010-1 (no
 Equipment for Measurement,    replaced.             direct
 Control and Laboratory Use:                         replacement).
 Part 2: Particular
 Requirements for Hand-Held
 Probe Assemblies for
 Electrical Measurement and
 Test.
------------------------------------------------------------------------


[[Page 14419]]


    Table 8--Test Standard OSHA Proposes To Remove From the Scope of
                       Recognition of TUVPSG, Inc.
------------------------------------------------------------------------
                                                    Proposed replacement
Proposed test standard to be   Reason for proposed  test standard(s) (if
           removed                   removal             applicable)
------------------------------------------------------------------------
UL 745-1 Portable Electric    Withdrawn...........  None.
 Tools.
UL 745-2-1 Particular         Withdrawn...........  None.
 Requirements of Drills.
UL 745-2-5 Particular         Withdrawn...........  None.
 Requirements for Circular
 Saws and Circular Knives.
UL 745-2-17 Particular        Withdrawn...........  None.
 Requirements for Routers
 and Trimmers.
UL 745-2-36 Particular        Withdrawn...........  None.
 Requirements for Hand Motor
 Tools.
UL 745-2-37 Particular        Withdrawn...........  None.
 Requirements for Plate
 Jointers.
UL 61010A-1 Electrical        Withdrawn and         UL 61010-1
 Equipment for Laboratory      replaced.             Electrical
 Use; Part 1: General                                Equipment for
 Requirements.                                       Measurement,
                                                     Control and
                                                     Laboratory Use;
                                                     Part 1: General
                                                     Requirements.
UL 61010A-2-010 Electrical    Withdrawn and         UL 61010-2-010
 Equipment for Laboratory      replaced.             Electrical
 Use; Part 2: Particular                             Equipment for
 Requirements for the                                Measurement,
 Heating of Materials.                               Control and
                                                     Laboratory Use--
                                                     Part 2-010:
                                                     Particular
                                                     Requirements for
                                                     Laboratory
                                                     Equipment for the
                                                     Heating of
                                                     Materials.
UL 61010A-2-020 Electrical    Withdrawn and         UL 61010-2-020
 Equipment for Laboratory      replaced.             Electrical
 Use; Part 2: Particular                             Equipment for
 Requirements for Laboratory                         Measurement,
 Centrifuges.                                        Control, and
                                                     Laboratory Use--
                                                     Part 2-020:
                                                     Particular
                                                     Requirements for
                                                     Laboratory
                                                     Centrifuges.
UL 61010A-2-041 Electrical    Withdrawn and         UL 61010-1 (no
 Equipment for Laboratory      replaced.             direct
 Use: Part 2: Particular                             replacement).
 Requirements for Autoclaves
 Using Steam for the
 Treatment of Medical
 Materials for Laboratory
 Purposes.
UL 61010A-2-051 Electrical    Withdrawn and         UL 61010-2-051
 Equipment for Laboratory      replaced.             Electrical
 Use; Part 2: Particular                             Equipment for
 Requirements for Laboratory                         Measurement,
 Equipment Mixing and                                Control and
 Stirring.                                           Laboratory Use--
                                                     Part 2-051:
                                                     Particular
                                                     Requirements for
                                                     Laboratory
                                                     Equipment for
                                                     Mixing and
                                                     Stirring.
UL 61010A-2-061 Electrical    Withdrawn and         UL 61010-2-061
 Equipment for Laboratory      replaced.             Electrical
 Use: Part 2: Particular                             Equipment for
 Requirements for Laboratory                         Measurement,
 Atomic Spectrometers with                           Control and
 Thermal Atomization and                             Laboratory Use--
 Ionization.                                         Part 2-061:
                                                     Particular
                                                     Requirements for
                                                     Laboratory Atomic
                                                     Spectrometers with
                                                     Thermal Atomization
                                                     and Ionization.
UL 61010B-1 Electrical        Withdrawn and         UL 61010-1
 Measuring and Test            replaced.             Electrical
 Equipment; Part 1: General                          Equipment for
 Requirements.                                       Measurement,
                                                     Control and
                                                     Laboratory Use;
                                                     Part 1: General
                                                     Requirements.
------------------------------------------------------------------------


    Table 9--Test Standard OSHA Proposes To Remove From the Scope of
              Recognition of Underwriters Laboratory, Inc.
------------------------------------------------------------------------
                                                    Proposed replacement
Proposed test standard to be   Reason for proposed  test standard(s) (if
           removed                   removal             applicable)
------------------------------------------------------------------------
UL 61010A-2-020--Electrical   Standard withdrawn    UL 61010-2-020--
 Equipment for Laboratory      by Standards          Standard for Safety
 Use; Part 2: Particular       Organization.         Requirements for
 Requirements for Laboratory                         Electrical
 Equipment for Laboratory                            Equipment for
 Centrifuges.                                        Laboratory Use;
                                                     Part 2-020:
                                                     Particular
                                                     Requirements for
                                                     Laboratory
                                                     Centrifuges.
ANSI C37.44 Distribution Oil  Withdrawn...........  None.
 Cutouts and Fuse Links.
IEEE C37.29 Low-Voltage AC    Withdrawn...........  None.
 Power Circuit Protectors
 Used in Enclosures.
IEEE C37.45 Distribution      Withdrawn...........  None.
 Enclosed Single-Pole Air
 Switches.
IEEE C37.52 Low-Voltage AC    Withdrawn...........  None.
 Power Circuit Protectors
 Used in Enclosures--Test
 Procedures.
UL 1093 Halogenated Agent     Withdrawn...........  None.
 Fire Extinguishers.
UL 1244 Electrical and        Withdrawn...........  None.
 Electronic Measuring and
 Testing Equipment.
UL 1448 Electric Hedge        Withdrawn and         UL 60745-2-15
 Trimmers.                     replaced.             Particular
                                                     Requirements for
                                                     Hedge Trimmers.
ISA 60079-2 Explosive         Withdrawn and         UL 60079-2 Explosive
 Atmospheres--Part 2:          replaced.             Atmospheres--Part
 Equipment Protection by                             2: Protection by
 Pressurized Enclosures                              Pressurized
 ``p''.                                              Enclosures ``p''.
ISA 60079-5 Explosive         Withdrawn and         UL 60079-5 Explosive
 Atmospheres--Part 5:          replaced.             Atmospheres--Part
 Equipment Protection by                             5: Equipment
 Power Filling ``q''.                                Protection by
                                                     Powder Filling
                                                     ``q''.
ISA 60079-18 Explosive        Withdrawn and         UL 60079-18
 Atmospheres--Part 18:         replaced.             Explosive
 Equipment Protection by                             Atmospheres--Part
 Encapsulation ``m''.                                18: Equipment
                                                     Protection by
                                                     Encapsulation
                                                     ``m''.
ISA 60079-26 Explosive        Withdrawn and         UL 60079-26
 Atmospheres--Part 26:         replaced.             Explosive
 Equipment for Use in Class                          Atmospheres--Part
 I, Zone 0 Hazardous                                 26: Equipment for
 (Classified) Locations.                             Use in Class I,
                                                     Zone 0 Hazardous
                                                     (Classified)
                                                     Locations.
UL 745-1 Portable Electric    Withdrawn...........  None.
 Tools.
UL 745-2-1 Particular         Withdrawn...........  None.
 Requirements of Drills.
UL 745-2-5 Particular         Withdrawn...........  None.
 Requirements for Circular
 Saws and Circular Knives.
UL 745-2-17 Particular        Withdrawn...........  None.
 Requirements for Routers
 and Trimmers.
UL 745-2-36 Particular        Withdrawn...........  None.
 Requirements for Hand Motor
 Tools.
UL 745-2-37 Particular        Withdrawn...........  None.
 Requirements for Plate
 Jointers.

[[Page 14420]]

 
UL 61010A-1 Electrical        Withdrawn and         UL 61010-1
 Equipment for Laboratory      replaced.             Electrical
 Use; Part 1: General                                Equipment for
 Requirements.                                       Measurement,
                                                     Control and
                                                     Laboratory Use;
                                                     Part 1: General
                                                     Requirements.
UL 61010A-2-010 Electrical    Withdrawn and         UL 61010-2-010
 Equipment for Laboratory      replaced.             Electrical
 Use; Part 2: Particular                             Equipment for
 Requirements for the                                Measurement,
 Heating of Materials.                               Control and
                                                     Laboratory Use--
                                                     Part 2-010:
                                                     Particular
                                                     Requirements for
                                                     Laboratory
                                                     Equipment for the
                                                     Heating of
                                                     Materials.
UL 61010A-2-020 Electrical    Withdrawn and         UL 61010-2-020
 Equipment for Laboratory      replaced.             Electrical
 Use; Part 2: Particular                             Equipment for
 Requirements for Laboratory                         Measurement,
 Centrifuges.                                        Control, and
                                                     Laboratory Use--
                                                     Part 2-020:
                                                     Particular
                                                     Requirements for
                                                     Laboratory
                                                     Centrifuges.
UL 61010A-2-041 Electrical    Withdrawn and         UL 61010-1 (no
 Equipment for Laboratory      replaced.             direct
 Use: Part 2: Particular                             replacement).
 Requirements for Autoclaves
 Using Steam for the
 Treatment of Medical
 Materials for Laboratory
 Purposes.
UL 61010A-2-051 Electrical    Withdrawn and         UL 61010-2-051
 Equipment for Laboratory      replaced.             Electrical
 Use; Part 2: Particular                             Equipment for
 Requirements for Laboratory                         Measurement,
 Equipment Mixing and                                Control and
 Stirring.                                           Laboratory Use--
                                                     Part 2-051:
                                                     Particular
                                                     Requirements for
                                                     Laboratory
                                                     Equipment for
                                                     Mixing and
                                                     Stirring.
UL 61010A-2-061 Electrical    Withdrawn and         UL 61010-2-061
 Equipment for Laboratory      replaced.             Electrical
 Use: Part 2: Particular                             Equipment for
 Requirements for Laboratory                         Measurement,
 Atomic Spectrometers with                           Control and
 Thermal Atomization and                             Laboratory Use--
 Ionization.                                         Part 2-061:
                                                     Particular
                                                     Requirements for
                                                     Laboratory Atomic
                                                     Spectrometers with
                                                     Thermal Atomization
                                                     and Ionization.
UL 61010B-1 Electrical        Withdrawn and         UL 61010-1
 Measuring and Test            replaced.             Electrical
 Equipment; Part 1: General                          Equipment for
 Requirements.                                       Measurement,
                                                     Control and
                                                     Laboratory Use;
                                                     Part 1: General
                                                     Requirements.
UL 61010B-2-031 Electrical    Withdrawn and         UL 61010-1 (no
 Equipment for Measurement,    replaced.             direct
 Control and Laboratory Use:                         replacement).
 Part 2: Particular
 Requirements for Hand-Held
 Probe Assemblies for
 Electrical Measurement and
 Test.
UL 61010C-1 Process Control   Withdrawn and         UL 61010-1
 Equipment.                    replaced.             Electrical
                                                     Equipment for
                                                     Measurement,
                                                     Control and
                                                     Laboratory Use;
                                                     Part 1: General
                                                     Requirements.
------------------------------------------------------------------------

    To obtain or review copies of comments submitted to the docket, 
contact the Docket Office, Occupational Safety and Health 
Administration, U.S. Department of Labor, at the above address. These 
materials will also be available online at http://www.regulations.gov 
under Docket No. OSHA-2013-0012.
    OSHA staff will review all comments to the docket submitted in a 
timely manner and, after addressing the issues raised by these 
comments, will make a recommendation to the Assistant Secretary for 
Occupational Safety and Health regarding the removal of these test 
standards from the NRTL Program's List of Appropriate Test Standards 
and to update the scope of recognition of several NRTLs. The Assistant 
Secretary will make the final decision. In making this decision, the 
Assistant Secretary may undertake other proceedings prescribed in 
Appendix A to 29 CFR 1910.7. OSHA will publish a public notice of this 
final decision in the Federal Register.

IV. Authority and Signature

    Loren Sweatt, Acting Assistant Secretary of Labor for Occupational 
Safety and Health, authorized the preparation of this notice. 
Accordingly, the agency is issuing this notice pursuant to 29 U.S.C. 
657(g)(2)), Secretary of Labor's Order No. 1-2012 (77 FR 3912, Jan. 25, 
2012), and 29 CFR 1910.7.

    Signed at Washington, DC, on April 3, 2019.
Loren Sweatt,
Acting Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2019-07040 Filed 4-9-19; 8:45 am]
 BILLING CODE 4510-26-P


