
[Federal Register Volume 80, Number 82 (Wednesday, April 29, 2015)]
[Notices]
[Pages 23820-23822]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-09986]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2012-0017]


Reports of Injuries to Employees Operating Mechanical Power 
Presses; Extension of the Office of Management and Budget's (OMB) 
Approval of an Information Collection (Paperwork) Requirement

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Request for public comments.

-----------------------------------------------------------------------

SUMMARY: OSHA solicits public comments concerning its proposal to 
extend OMB approval of the information collection requirement contained 
in the Standard on Reports of Injuries to Employees Operating 
Mechanical Power Presses (29 CFR 1910.217(g)).

DATES: Comments must be submitted (postmarked, sent, or received) by 
June 29, 2015.

ADDRESSES: 
    Electronically: You may submit comments and attachments 
electronically at http://www.regulations.gov, which is the Federal 
eRulemaking Portal. Follow the instructions online for submitting 
comments.
    Facsimile: If your comments, including attachments, are not longer

[[Page 23821]]

than 10 pages you may fax them to the OSHA Docket Office at (202) 693-
1648.
    Mail, hand delivery, express mail, messenger, or courier service: 
When using this method, you must submit a copy of your comments and 
attachments to the OSHA Docket Office, Docket No. OSHA-2012-0017, 
Occupational Safety and Health Administration, U.S. Department of 
Labor, Room N-2625, 200 Constitution Avenue NW., Washington, DC 20210. 
Deliveries (hand, express mail, messenger, and courier service) are 
accepted during the Department of Labor's and Docket Office's normal 
business hours, 8:15 a.m. to 4:45 p.m., e.t.
    Instructions: All submissions must include the Agency name and the 
OSHA docket number (OSHA-2012-0017) for the Information Collection 
Request (ICR). All comments, including any personal information you 
provide, are placed in the public docket without change, and may be 
made available online at http://www.regulations.gov. For further 
information on submitting comments see the ``Public Participation'' 
heading in the section of this notice titled SUPPLEMENTARY INFORMATION.
    Docket: To read or download comments or other material in the 
docket, go to http://www.regulations.gov or the OSHA Docket Office at 
the address above. All documents in the docket (including this Federal 
Register notice) are listed in the http://www.regulations.gov index; 
however, some information (e.g., copyrighted material) is not publicly 
available to read or download from the Web site. All submissions, 
including copyrighted material, are available for inspection and 
copying at the OSHA Docket Office. You may also contact Theda Kenney at 
the address below to obtain a copy of the ICR.

FOR FURTHER INFORMATION CONTACT: Theda Kenney or Todd Owen, Directorate 
of Standards and Guidance, OSHA, U.S. Department of Labor, Room N-3609, 
200 Constitution Avenue NW., Washington, DC 20210; telephone (202) 693-
2222.

SUPPLEMENTARY INFORMATION:

I. Background

    The Department of Labor, as part of its continuing effort to reduce 
paperwork and respondent (i.e., employer) burden, conducts a 
preclearance consultation program to provide the public with an 
opportunity to comment on proposed and continuing information 
collection requirements in accord with the Paperwork Reduction Act of 
1995 (PRA-95) (44 U.S.C. 3506(c)(2)(A)). This program ensures that 
information is in the desired format, reporting burden (time and costs) 
is minimal, collection instruments are clearly understood, and OSHA's 
estimate of the information collection burden is accurate. The 
Occupational Safety and Health Act of 1970 (the OSH Act) (29 U.S.C. 651 
et seq.) authorizes information collection by employers as necessary or 
appropriate for enforcement of the OSH Act or for developing 
information regarding the causes and prevention of occupational 
injuries, illnesses, and accidents (29 U.S.C. 657). The OSH Act also 
requires that OSHA obtain such information with minimum burden upon 
employers, especially those operating small businesses, and to reduce 
to the maximum extent feasible unnecessary duplication of efforts in 
obtaining information (29 U.S.C. 657).
    In the event that a worker is injured while operating a mechanical 
power press, 29 CFR 1910.217(g) requires the employer to provide 
information to OSHA regarding the incident within 30 days of the 
injury. This information includes the employer's and worker's name(s), 
workplace address and location; injury sustained; task being performed 
when the injury occurred; number of operators required for the 
operation and the number of operators provided with controls and 
safeguards; cause of the incident; type of clutch, safeguard(s), and 
feeding method(s) used; and means used to actuate the press stroke. 
OSHA's Directorate of Standards and Guidance, or the State agency 
administering a plan approved by the Assistant Secretary of Labor for 
Occupational Safety and Health, collects the information. These reports 
are a source of up-to-date information on power press machines. 
Specifically, this information identifies the equipment used and 
conditions associated with these injuries.

II. Special Issues for Comment

    OSHA has a particular interest in comments on the following issues:
     Whether the proposed information collection requirements 
are necessary for the proper performance of the Agency's functions, 
including whether the information is useful;
     The accuracy of OSHA's estimate of the burden (time and 
costs) of the information collection requirements, including the 
validity of the methodology and assumptions used;
     The quality, utility, and clarity of the information 
collected; and
     Ways to minimize the burden on employers who must comply; 
for example, by using automated or other technological information 
collection and transmission techniques.

III. Proposed Actions

    OSHA is requesting that OMB extend its approval of the information 
collection requirement contained in the Standard on Reports of Injuries 
to Employees Operating Mechanical Power Presses (29 CFR 1910.217(g)). 
OSHA is proposing to decrease the existing burden hour estimate for the 
collection of information requirement specified in the standard from 
453 hours to 400 hours, for a total decrease of 53 hours. This 
adjustment is a result of a decline in the number of reports of such 
injuries received by OSHA annually.
    The Agency will summarize the comments submitted in response to 
this notice and will include this summary in the request to OMB.
    Type of Review: Extension of a currently approved collection.
    Title: Reports of Injuries to Employees Operating Mechanical Power 
Presses (29 CFR 1910.217(g)).
    OMB Control Number: 1218-0070.
    Affected Public: Business or other for-profits.
    Number of Respondents: 1,210.
    Frequency of Responses: On occasion.
    Average Time per Response: Five minutes (.08 hour) for a secretary 
to submit the report to OSHA and 15 minutes (.25 hour) for a supervisor 
to obtain the information regarding the incident and to prepare the 
written report.
    Estimated Total Burden Hours: 400.
    Estimated Cost (Operation and Maintenance): $0.

IV. Public Participation--Submission of Comments on this Notice and 
Internet Access to Comments and Submissions

    You may submit comments in response to this document as follows: 
(1) Electronically at http://www.regulations.gov, which is the Federal 
eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. All 
comments, attachments, and other material must identify the Agency name 
and the OSHA docket number for the ICR (Docket No. OSHA-2012-0017). You 
may supplement electronic submissions by uploading document files 
electronically. If you wish to mail additional materials in reference 
to an electronic or facsimile submission, you must submit them to the 
OSHA Docket Office (see the section of this notice titled ADDRESSES). 
The additional materials must clearly identify your electronic comments 
by your name, date, and the docket number so the Agency can attach them 
to your comments.

[[Page 23822]]

    Because of security procedures, the use of regular mail may cause a 
significant delay in the receipt of comments. For information about 
security procedures concerning the delivery of materials by hand, 
express delivery, messenger, or courier service, please contact the 
OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627).
    Comments and submissions are posted without change at http://www.regulations.gov. Therefore, OSHA cautions commenters about 
submitting personal information such as their social security number 
and date of birth. Although all submissions are listed in the http://www.regulations.gov index, some information (e.g., copyrighted 
material) is not publicly available to read or download from this Web 
site. All submissions, including copyrighted material, are available 
for inspection and copying at the OSHA Docket Office.
    Information on using the http://www.regulations.gov Web site to 
submit comments and access the docket is available at the Web site's 
``User Tips'' link. Contact the OSHA Docket Office for information 
about materials not available from the Web site, and for assistance in 
using the Internet to locate docket submissions.

V. Authority and Signature

    David Michaels, Ph.D., MPD, Assistant Secretary of Labor for 
Occupational Safety and Health, directed the preparation of this 
notice. The authority for this notice is the Paperwork Reduction Act of 
1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 1-2012 
(77 FR 3912).

    Signed at Washington, DC, on April 24, 2015.
David Michaels,
Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2015-09986 Filed 4-28-15; 8:45 am]
 BILLING CODE 4510-26-P


