[Federal Register Volume 86, Number 79 (Tuesday, April 27, 2021)]
[Notices]
[Pages 22279-22281]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2021-08777]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2011-0190]


Shipyard Employment Standards; Extension of the Office of 
Management and Budget's (OMB) Approval of Information Collection 
(Paperwork) Requirements

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Request for public comments.

-----------------------------------------------------------------------

SUMMARY: OSHA solicits public comments concerning the proposal to 
extend OMB approval of the information collection requirements 
contained in the Shipyard Employment Standards. The purpose of the 
collection of information (paperwork) provisions of the Standards is to 
reduce workers' risk of death or serious injury by ensuring that 
equipment has been tested and is in safe operating condition.

DATES: Comments must be submitted (postmarked, sent, or received) by 
June 28, 2021.

ADDRESSES: 
    Electronically: You may submit comments and attachments 
electronically at http://www.regulations.gov, which is the Federal 
eRulemaking Portal. Follow the instructions online for submitting 
comments.
    Docket: To read or download comments or other material in the 
docket, go to http://www.regulations.gov. Documents in the docket are 
listed in the http://www.regulations.gov index; however, some 
information (e.g., copyrighted material) is not publicly available to 
read or download through the website. All submissions, including 
copyrighted material, are available for inspection through the OSHA 
Docket Office. Contact the OSHA Docket Office for assistance in 
locating docket submissions.
    Instructions: All submissions must include the agency name and the 
OSHA docket number (OSHA-2011-0190) for the Information Collection 
Request (ICR). OSHA will place comments and requests to speak, 
including personal information, in the public docket, which may be 
available online. Therefore, OSHA cautions interested parties about 
submitting personal information such as social security numbers and 
birthdates. For further information on submitting comments, see the 
``Public Participation'' heading in the section of this notice titled 
SUPPLEMENTARY INFORMATION.

FOR FURTHER INFORMATION CONTACT: Seleda Perryman or Theda Kenney, 
Directorate of Standards and Guidance, OSHA, U.S. Department of Labor, 
telephone (202) 693-2222.

SUPPLEMENTARY INFORMATION: 

I. Background

    The Department of Labor, as part of a continuing effort to reduce 
paperwork and respondent (i.e., employer) burden, conducts a 
preclearance consultation program to provide the public with an 
opportunity to comment on proposed and continuing information 
collection

[[Page 22280]]

requirements in accordance with the Paperwork Reduction Act of 1995 
(PRA) (44 U.S.C. 3506(c)(2)(A)). This program ensures that information 
is in the desired format, the reporting burden (time and costs) is 
minimal, the collection instruments are clearly understood, and OSHA's 
estimate of the information collection burden is accurate. The 
Occupational Safety and Health Act of 1970 (OSH Act) (29 U.S.C. 651 et 
seq.) authorizes information collection by employers as necessary or 
appropriate for enforcement of the OSH Act, or for developing 
information regarding the causes and prevention of occupational 
injuries, illnesses, and accidents (29 U.S.C. 657). The OSH Act also 
requires OSHA to obtain such information with a minimum burden upon 
employers, especially those operating small businesses, and to reduce 
to the maximum extent feasible unnecessary duplication of efforts in 
obtaining said information (29 U.S.C. 657).
    The following sections describe who uses the information collected 
under each requirement, as well as how they use it. The purpose of 
these requirements is to reduce employees' risk of death or serious 
injury by ensuring that equipment has been tested and is in safe 
operating condition.
    Manila rope and manila-rope slings (paragraph 1915.112(a)(1))--The 
employer must ensure that manila rope and manila-rope slings have 
permanently affixed and legible identification markings as prescribed 
by the manufacturer that indicate the recommended safe working load for 
the type(s) of hitch(es) used, the angle upon which it is based, and 
the number of legs if more than one.
    Wire rope and wire-rope slings (paragraph 1915.112(b)(1)(i))--The 
employer must ensure that wire rope and wire-rope slings have 
permanently affixed and legible identification markings as prescribed 
by the manufacturer that indicate the recommended safe working load for 
the type(s) of hitch(es) used, the angle upon which it is based, and 
the number of legs if more than one.
    Chain and chain slings (paragraph 1915.112(c)(1)(i))--The employer 
must ensure that chain and chain slings have permanently affixed and 
legible identification markings as prescribed by the manufacturer that 
indicate the recommended safe working load for the type(s) of hitch(es) 
used, the angle upon which it is based, and the number of legs if more 
than one.
    Chain and chain slings (paragraph 1915.112(c)(2))--The employer 
shall visually inspect all sling chains, including end fastenings, 
before being used on the job, as well as every three months. The 
inspection shall include inspection for wear, defective welds, 
deformation and increase in length or stretch. Each chain shall bear an 
indication of the month in which it was thoroughly inspected.
    Shackles (paragraph 1915.113(a)(1))--The employer must ensure that 
shackles have permanently affixed and legible identification markings 
as prescribed by the manufacturer that indicate the recommended safe 
working load.
    Test Records for Hooks (paragraph 1915.113(b)(1))--This paragraph 
requires that the manufacturer's recommendations be followed in 
determining the safe working loads of the various sizes and types of 
hooks. If the manufacturer's recommendations are not available, the 
hook must be tested to twice the intended safe working load before it 
is initially put into use. The employer must maintain and keep readily 
available a certification record which includes the date of such test, 
the signature of the person who performed the test, and an identifier 
for the hook which was tested.
    The records are used to assure that equipment has been properly 
tested. The records also provide the most efficient means for the 
compliance officers to determine that an employer is complying with the 
Standard.
    Mobile Crawler or Truck Cranes Used on a Vessel (paragraph 
1915.115(c))--This paragraph requires that the maximum manufacturer's 
rated safe working loads for the various working radii of the boom and 
the maximum and minimum radii at which the boom may be safely used with 
and without outriggers shall be conspicuously posted near the controls 
and shall be visible to the operator.
    Examination and Test Records for Unfired Pressure Vessels 
(paragraphs 1915.172(b) and (d))--Paragraph (b) requires that portable, 
unfired pressure vessels not built to the requirements of the American 
Society of Mechanical Engineers Boiler and Pressure Vessel Code, 
Section VIII, Rules for Construction of Unfired Pressure Vessels, 1963 
be examined quarterly by a competent person and subjected to a yearly 
hydrostatic pressure test. A certification record of such examinations 
and tests shall be maintained as specified by paragraph (d).

II. Special Issues for Comment

    OSHA has a particular interest in comments on the following issues:
     Whether the proposed information collection requirements 
are necessary for the proper performance of the agency's functions, 
including whether the information is useful;
     The accuracy of OSHA's estimate of the burden (time and 
costs) of the information collection requirements, including the 
validity of the methodology and assumptions used;
     The quality, utility, and clarity of the information 
collected; and
     Ways to minimize the burden on employers who must comply; 
for example, by using automated or other technological information 
collection and transmission techniques.

III. Proposed Actions

    OSHA is requesting an adjustment decrease in the existing burden 
hour estimates for the collection of information requirements specified 
by the Standards from 11,813 hours to 10,610 hours, a total difference 
of 1,203 hours. This decrease is due to a change in the number of 
establishments. In this ICR, the scope of the maritime standards in 29 
CFR 1915 for slings, shackles, and hooks are based on the Final 
Economic Analysis for the Final Rule revising subpart F of 29 CFR part 
1915 prepared by OSHA's Office of Regulatory Analysis. As a result of 
the Final Rule, the revision of the standard applies to all shipyard 
employment which is defined in Sec.  1915.4(i) as ship repairing, 
shipbuilding, shipbreaking, and related employment. Also, upon further 
analysis, the agency identified two new collections of information 
contained in the Standard under paragraphs Sec. Sec.  1915.112(c)(2) 
and 1915.115(c)(1). The agency will summarize any comments submitted in 
response to this notice and will include this summary in the request to 
OMB.
    Type of Review: Extension of a currently approved collection.
    Title: Shipyard Employment Standards (29 CFR part 1915).
    OMB Number: 1218-0220.
    Affected Public: Business or other for-profits; Not-for-profit 
organizations; Federal Government; State, Local, or Tribal Government.
    Number of Respondents: 4,726.
    Frequency of Response: On occasion.
    Average Time per Response: Various.
    Estimated Total Burden Hours: 10,522.
    Estimated Cost (Operation and Maintenance): $0.

IV. Public Participation--Submission of Comments on This Notice and 
Internet Access to Comments and Submissions

    You may submit comments in response to this document as follows:

[[Page 22281]]

(1) Electronically at http://www.regulations.gov, which is the Federal 
eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. Please 
note: While OSHA's Docket Office is continuing to accept and process 
submissions by regular mail, due to the COVID-19 pandemic, the Docket 
Office is closed to the public and not able to receive submissions to 
the docket by hand, express mail, messenger, and courier service. All 
comments, attachments, and other material must identify the agency name 
and the OSHA docket number for the ICR (Docket No. OSHA-2011-0190). You 
may supplement electronic submissions by uploading document files 
electronically. If you wish to mail additional materials in reference 
to an electronic or facsimile submission, you must submit them to the 
OSHA Docket Office (see the section of this notice titled ADDRESSES). 
The additional materials must clearly identify your electronic comments 
by your name, date, and the docket number, so the agency can attach 
them to your comments.
    Due to security procedures, the use of regular mail may cause a 
significant delay in the receipt of comments.
    Comments and submissions are posted without change at http://www.regulations.gov. Therefore, OSHA cautions commenters about 
submitting personal information, such as social security numbers and 
dates of birth. Although all submissions are listed in the http://www.regulations.gov index, some information (e.g., copyrighted 
material) is not publicly available to read or download from this 
website. All submissions, including copyrighted material, are available 
for inspection and copying at the OSHA Docket Office. Information on 
using the http://www.regulations.gov website to submit comments and 
access the docket is available at the website's ``User Tips'' link. 
Contact the OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627) 
for information about materials not available from the website, and for 
assistance in using the internet to locate docket submissions.

V. Authority and Signature

    James S. Frederick, Acting Assistant Secretary of Labor for 
Occupational Safety and Health, directed the preparation of this 
notice. The authority for this notice is the Paperwork Reduction Act of 
1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 1-2012 
(77 FR 3912).

    Signed at Washington, DC, on April 19, 2021.
James S. Frederick,
Acting Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2021-08777 Filed 4-26-21; 8:45 am]
BILLING CODE 4510-26-P


