[Federal Register Volume 87, Number 195 (Tuesday, October 11, 2022)]
[Notices]
[Pages 61370-61371]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2022-21993]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2010-0020]


Additional Requirements for Special Dipping and Coating 
Operations (Dip Tanks); Extension of the Office of Management and 
Budget's (OMB) Approval of the Information Collection (Paperwork) 
Requirement

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Request for public comments.

-----------------------------------------------------------------------

SUMMARY: OSHA solicits public comments concerning its proposal to 
extend the Office of Management and Budget (OMB) approval of the 
information collection requirement specified in its Standard on Dipping 
and Coating Operations (Dip Tanks).

DATES: Comments must be submitted (postmarked, sent, or received) by 
December 12, 2022.

ADDRESSES: 
    Electronically: You may submit comments and attachments 
electronically at http://www.regulations.gov, which is the Federal 
eRulemaking Portal. Follow the instructions online for submitting 
comments.
    Instructions: All submissions must include the agency name and the 
OSHA docket number (OSHA-2010-0020) for the Information Collection 
Request (ICR). OSHA will place all comments and requests to speak, 
including any personal information you provide, in the public docket 
without change, which may be made available online at http://www.regulations.gov. Therefore, OSHA cautions interested parties about 
submitting personal information such as social security numbers and 
birthdates. For further information on submitting comments, see the 
``Public Participation'' heading in the section of this notice titled 
SUPPLEMENTARY INFORMATION.
    Docket: To read or download comments or other material in the 
docket, go to http://www.regulations.gov or the OSHA Docket Office at 
the above address. All documents in the docket (including this Federal 
Register notice) are listed in the http://www.regulations.gov index; 
however, some information (e.g., copyrighted material) is not publicly 
available to read or download from the website. All submissions, 
including copyrighted material, are available for inspection and 
copying at the OSHA Docket Office. Contact the OSHA Docket Office for 
assistance in locating docket submissions.

FOR FURTHER INFORMATION CONTACT: Theda Kenney or Seleda Perryman, 
Directorate of Standards and Guidance, OSHA, U.S. Department of Labor, 
telephone: (202) 693-2222.

SUPPLEMENTARY INFORMATION: 

I. Background

    The Department of Labor, as part of its continuing effort to reduce 
paperwork and respondent (i.e., employer) burden, conducts a 
preclearance consultation program to provide the public with an 
opportunity to comment on proposed and continuing information 
collection requirements in accordance with the Paperwork Reduction Act 
of 1995 (PRA) (44 U.S.C. 3506(c)(2)(A)). This program ensures that 
information is in the desired format, the reporting burden (time and 
costs) is minimal, the collection instruments are clearly understood, 
and OSHA's estimate of the information collection burden is accurate. 
The Occupational Safety and Health Act of 1970 (OSH Act) (29 U.S.C. 651 
et seq.) authorizes information collection by employers as necessary or 
appropriate for enforcement of the OSH Act or for developing 
information regarding the causes and prevention of occupational 
injuries, illnesses, and accidents (See 29 U.S.C. 657). The OSH Act 
also requires OSHA to obtain such information with a minimum burden 
upon employers, especially those operating small businesses, and to 
reduce to the maximum extent feasible unnecessary duplication of 
efforts in obtaining information (See 29 U.S.C. 657).
    The Standard on Dipping and Coating Operations (29 CFR 
1910.126(g)(4)) requires employers to post a conspicuous sign near each 
piece of electrostatic detearing equipment that

[[Page 61371]]

notifies employees of the minimum safe distance they must maintain 
between goods undergoing electrostatic detearing and the electrodes or 
conductors of the equipment used in the process. Doing so reduces the 
likelihood of igniting the explosive chemicals used in electrostatic 
detearing operations.

II. Special Issues for Comment

    OSHA has a particular interest in comments on the following issues:
     Whether the proposed information collection requirement is 
necessary for the proper performance of the agency's functions to 
protect workers, including whether the information is useful;
     The accuracy of OSHA's estimate of the burden (time and 
costs) of the information collection requirement, including the 
validity of the methodology and assumptions used;
     The quality, utility, and clarity of the information 
collected; and
     Ways to minimize the burden on employers who must comply. 
For example, by using automated or other technological information 
collection and transmission techniques.

III. Proposed Actions

    The agency is requesting to retain its previous burden hour 
estimate of one (1) hour contained in the Standard on Additional 
Requirements for Special Dipping and Coating Operations (Dip Tanks) (29 
CFR 1910.126(g)(4)). There are no program changes or adjustments 
associated with the information collection requirement in the standard. 
The agency has correspondingly adjusted the per response burden to 
maintain a time burden as close as is possible to the actual time of 
one (1) hour.
    OSHA has determined that where electrostatic equipment is being 
used, the information has already been ascertained and that the ``safe 
distance'' has been displayed on a sign in a permanent manner. The 
agency will summarize the comments submitted in response to this notice 
and will include this summary in the request to OMB.
    Type of Review: Extension of a currently approved information 
collection.
    Title: Additional Requirements for Special Dipping and Coating 
Operations (Dip Tanks) (29 CFR 1910.126(g)(4)).
    OMB Control Number: 1218-0237.
    Affected Public: Business or other for-profits; Federal Government; 
State, Local, or Tribal Government.
    Number of Respondents: 10.
    Frequency of Recordkeeping: On occasion.
    Total Responses: 10.
    Average Time per Response: 0.
    Estimated Total Burden Hours: 1.
    Estimated Cost (Operation and Maintenance). $0.

IV. Public Participation--Submission of Comments on This Notice and 
Internet Access to Comments and Submissions

    You may submit comments in response to this document as follows: 
(1) electronically at http://www.regulations.gov, which is the Federal 
eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. Please 
note: While OSHA's Docket Office is continuing to accept and process 
submissions by regular mail due to the COVID-19 pandemic, the Docket 
Office is closed to the public and not able to receive submissions to 
the docket by hand, express mail, messenger, and courier service. All 
comments, attachments, and other material must identify the agency name 
and the OSHA docket number for the ICR (Docket No. OSHA-2010-0020). You 
may supplement electronic submissions by uploading document files 
electronically. If you wish to mail additional materials in reference 
to an electronic or a facsimile submission, you must submit them to the 
OSHA Docket Office (see the section of this notice titled ADDRESSES). 
The additional materials must clearly identify your electronic comments 
by your name, date, and the docket number so that the agency can attach 
them to your comments.
    Due to security procedures, the use of regular mail may cause a 
significant delay in the receipt of comments.
    For information about security procedures concerning the delivery 
of materials by hand, express delivery, messenger, or courier service, 
please contact the OSHA Docket Office at (202) 693-2350, (TTY (877) 
889-5627).
    Comments and submissions are posted without change at http://www.regulations.gov. Therefore, OSHA cautions commenters about 
submitting personal information such as social security numbers and 
dates of birth. Although all submissions are listed in the http://www.regulations.gov index, some information (e.g., copyrighted 
material) is not publicly available to read or download from this 
website.
    All submissions, including copyrighted material, are available for 
inspection and copying at the OSHA Docket Office. Information on using 
the http://www.regulations.gov website to submit comments and access 
the docket is available at the website's ``User Tips'' link. Contact 
the OSHA Docket Office for information about materials not available 
from the website, and for assistance in using the internet to locate 
docket submissions.

V. Authority and Signature

    James S. Frederick, Deputy Assistant Secretary of Labor for 
Occupational Safety and Health, directed the preparation of this 
notice. The authority for this notice is the Paperwork Reduction Act of 
1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 8-2020 
(85 FR 58393).

    Signed at Washington, DC, on September 28, 2022.
James S. Frederick,
Deputy Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2022-21993 Filed 10-7-22; 8:45 am]
BILLING CODE 4510-26-P


