[Federal Register Volume 84, Number 217 (Friday, November 8, 2019)]
[Notices]
[Pages 60454-60455]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-24373]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2010-0020]


Additional Requirements for Special Dipping and Coating 
Operations (Dip Tanks); Extension of the Office of Management and 
Budget's (OMB) Approval of the Information Collection (Paperwork) 
Requirement

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Request for public comments.

-----------------------------------------------------------------------

SUMMARY: OSHA solicits public comments concerning the proposal to 
extend the Office of Management and Budget (OMB) approval of the 
information collection requirement specified in the Standard on Dipping 
and Coating Operations (Dip Tanks).

DATES: Comments must be submitted (postmarked, sent, or received) by 
January 7, 2020.

ADDRESSES: 
    Electronically: You may submit comments and attachments 
electronically at http://www.regulations.gov, which is the Federal 
eRulemaking Portal. Follow the instructions online for submitting 
comments.
    Facsimile: If your comments, including attachments, are not longer 
than 10 pages you may fax them to the OSHA Docket Office at (202) 693-
1648.
    Mail, hand delivery, express mail, messenger, or courier service: 
When using this method, you must submit a copy of your comments and 
attachments to the OSHA Docket Office, OSHA Docket No. OSHA-2010-0020, 
Occupational Safety and Health Administration, U.S. Department of 
Labor, Room N-3653, 200 Constitution Avenue NW, Washington, DC 20210. 
Deliveries (hand, express mail, messenger, and courier service) are 
accepted during the OSHA Docket Office's normal business hours, 10:00 
a.m. to 3:00 p.m., ET.
    Instructions: All submissions must include the agency name and the 
OSHA docket number (OSHA-2010-0020) for the Information Collection 
Request (ICR). All comments, including any personal information you 
provide, such as social security number and date of birth are placed in 
the public docket without change, and may be made available online at 
http://www.regulations.gov. For further information on submitting 
comments, see the ``Public Participation'' heading in the section of 
this notice titled SUPPLEMENTARY INFORMATION.
    Docket: To read or download comments or other material in the 
docket, go to http://www.regulations.gov or the OSHA Docket Office at 
the above address. All documents in the docket (including this Federal 
Register notice) are listed in the http://www.regulations.gov index; 
however, some information (e.g., copyrighted material) is not publicly 
available to read or download from the website. All submissions, 
including copyrighted material, are available for inspection and 
copying at the OSHA Docket Office. You may also contact Theda Kenney or 
Seleda Perryman at (202) 693-2222 to obtain a copy of the ICR.

FOR FURTHER INFORMATION CONTACT: Theda Kenney or Seleda Perryman, 
Directorate of Standards and Guidance, OSHA, U.S. Department of Labor, 
telephone: (202) 693-2222.

SUPPLEMENTARY INFORMATION: 

I. Background

    The Department of Labor, as part of a continuing effort to reduce 
paperwork and respondent (i.e., employer) burden, conducts a 
preclearance consultation program to provide the public with an 
opportunity to comment on proposed and continuing information 
collection requirements in accordance with the Paperwork Reduction Act 
of 1995 (PRA) (44 U.S.C. 3506(c)(2)(A)). This program ensures that 
information is in the desired format, the reporting burden (time and 
costs) is minimal, the collection instruments are clearly understood, 
and OSHA's estimate of the information collection burden is accurate. 
The Occupational Safety and Health Act of 1970 (OSH Act) (29 U.S.C. 651 
et seq.) authorizes information collection by employers as necessary or 
appropriate for enforcement of the Act or for developing information 
regarding the causes and prevention of occupational injuries, 
illnesses, and accidents (see 29 U.S.C. 657). The OSH Act also requires 
OSHA to obtain such information with a minimum burden upon employers, 
especially those operating small businesses, and to reduce to the 
maximum extent feasible unnecessary duplication of effort in obtaining 
said information (see 29 U.S.C. 657).

[[Page 60455]]

    The Standard on Dipping and Coating Operations (29 CFR 
1910.126(g)(4)) requires employers to post a conspicuous sign near each 
piece of electrostatic detearing equipment that notifies employees of 
the minimum safe distance they must maintain between goods undergoing 
electrostatic detearing and the electrodes or conductors of the 
equipment used in the process. Doing so reduces the likelihood of 
igniting the explosive chemicals used in electrostatic detearing 
operations.

II. Special Issues for Comment

    OSHA has a particular interest in comments on the following issues:
     Whether the proposed information collection requirement is 
necessary for the proper performance of the agency's functions to 
protect workers, including whether the information is useful;
     The accuracy of OSHA's estimate of the burden (time and 
costs) of the information collection requirement, including the 
validity of the methodology and assumptions used;
     The quality, utility, and clarity of the information 
collected; and
     Ways to minimize the burden on employers who must comply; 
for example, by using automated or other technological information 
collection and transmission techniques.

III. Proposed Actions

    The agency is requesting to retain the previous burden hour 
estimate of one (1) hour. There are no program changes or adjustments 
associated with the information collection requirement in the Standard. 
The agency has correspondingly adjusted the per response burden to 
maintain a time burden as close as is possible to the actual time of no 
hours (1 hour). OSHA is requesting that OMB extend approval of the 
information collection requirement contained in the Standard on 
Additional Requirements for Special Dipping and Coating Operations (Dip 
Tanks) (29 CFR 1910.126(g)(4)). This provision requires the employer to 
determine how far away goods being electrostatically deteared should be 
separated from electrodes or conductors, is called the ``safe 
distance.'' This minimum distance must be displayed conspicuously on a 
sign located near the equipment.
    OSHA has determined that where electrostatic equipment is being 
used, the information has already been ascertained and that the ``safe 
distance'' has been displayed on a sign in a permanent manner. The 
agency will summarize the comments submitted in response to this 
notice, and will include this summary in the request to OMB.
    Type of Review: Extension of a currently approved information 
collection.
    Title: Additional Requirements for Special Dipping and Coating 
Operations (Dip Tanks) (29 CFR 1910.126(g)(4)).
    OMB Control Number: 1218-0237.
    Affected Public: Business or other for-profits; Federal Government; 
State, Local, or Tribal Government.
    Number of Respondents: 10.
    Frequency of Recordkeeping: On occasion.
    Total Responses: 10.
    Average Time per Response: 0.
    Estimated Total Burden Hours: 1.
    Estimated Cost (Operation and Maintenance). $0.

IV. Public Participation--Submission of Comments on This Notice and 
Internet Access to Comments and Submissions

    You may submit comments in response to this document as follows: 
(1) Electronically at http://www.regulations.gov, which is the Federal 
eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. All 
comments, attachments, and other material must identify the agency name 
and the OSHA docket number (Docket No. OSHA-2010-0020) for the ICR. You 
may supplement electronic submissions by uploading document files 
electronically. If you wish to mail additional materials in reference 
to an electronic or facsimile submission, you must submit them to the 
OSHA Docket Office (see the section of this notice titled ADDRESSES). 
The additional materials must clearly identify electronic comments by 
your name, date, and the docket number so the agency can attach them to 
your comments.
    Due to security procedures, the use of regular mail may cause a 
significant delay in the receipt of comments. For information about 
security procedures concerning the delivery of materials by hand, 
express delivery, messenger, or courier service, please contact the 
OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627).
    Comments and submissions are posted without change at http://www.regulations.gov. Therefore, OSHA cautions commenters about 
submitting personal information such as social security numbers and 
dates of birth. Although all submissions are listed in the http://www.regulations.gov index, some information (e.g., copyrighted 
material) is not publicly available to read or download from this 
website.
    All submissions, including copyrighted material, are available for 
inspection and copying at the OSHA Docket Office. Information on using 
the http://www.regulations.gov website to submit comments and access 
the docket is available at the website's ``User Tips'' link. Contact 
the OSHA Docket Office for information about materials not available 
from the website, and for assistance in using the internet to locate 
docket submissions.

V. Authority and Signature

    Loren Sweatt, Principal Deputy Assistant Secretary of Labor for 
Occupational Safety and Health, directed the preparation of this 
notice. The authority for this notice is the Paperwork Reduction Act of 
1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 1-2012 
(77 FR 3912).

    Signed at Washington, DC, on November 1, 2019.
Loren Sweatt,
Principal Deputy Assistant Secretary of Labor for Occupational Safety 
and Health.
[FR Doc. 2019-24373 Filed 11-7-19; 8:45 am]
 BILLING CODE 4510-26-P


