
[Federal Register Volume 78, Number 68 (Tuesday, April 9, 2013)]
[Notices]
[Pages 21159-21160]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2013-08182]



[[Page 21159]]

-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2010-0020]


Additional Requirements for Special Dipping and Coating 
Operations (Dip Tanks); Extension of the Office of Management and 
Budget's Approval of the Information Collection (Paperwork) Requirement

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Request for public comments.

-----------------------------------------------------------------------

SUMMARY: OSHA solicits public comments concerning its proposal to 
extend OMB approval of the information collection requirement specified 
in its Standard on Dipping and Coating Operations (Dip Tanks) (29 CFR 
1910.126(g)(4)).

DATES: Comments must be submitted (postmarked, sent, or received) by 
June 10, 2013.

ADDRESSES: Electronically: You may submit comments and attachments 
electronically at http://www.regulations.gov, which is the Federal 
eRulemaking Portal. Follow the instructions online for submitting 
comments.
    Facsimile: If your comments, including attachments, are not longer 
than 10 pages, you may fax them to the OSHA Docket Office at (202) 693-
1648.
    Mail, hand delivery, express mail, messenger, or courier service: 
When using this method, you must submit a copy of your comments and 
attachments to the OSHA Docket Office, OSHA Docket No. OSHA-2010-0020, 
U.S. Department of Labor, Occupational Safety and Health 
Administration, Room N-2625, 200 Constitution Avenue NW., Washington, 
DC 20210. Deliveries (hand, express mail, messenger, and courier 
service) are accepted during the Department of Labor's and Docket 
Office's normal business hours, 8:15 a.m. to 4:45 p.m., e.t.
    Instructions: All submissions must include the Agency name and OSHA 
docket number for the Information Collection Request (ICR) (OSHA Docket 
No. OSHA-2010-0020). All comments, including any personal information 
you provide, are placed in the public docket without change, and may be 
made available online at http://www.regulations.gov. For further 
information on submitting comments see the ``Public Participation'' 
heading in the section of this notice titled SUPPLEMENTARY INFORMATION.
    Docket: To read or download comments or other material in the 
docket, go to http://www.regulations.gov or the OSHA Docket Office at 
the address above. All documents in the docket (including this Federal 
Register notice) are listed in the http://www.regulations.gov index; 
however, some information (e.g., copyrighted material) is not publicly 
available to read or download through the Web site. All submissions, 
including copyrighted material, are available for inspection and 
copying at the OSHA Docket Office. You may also contact Theda Kenney at 
the address below to obtain a copy of the ICR.

FOR FURTHER INFORMATION CONTACT: Theda Kenney or Todd Owen, Directorate 
of Standards and Guidance, OSHA, U.S. Department of Labor, Room N-3609, 
200 Constitution Avenue NW., Washington, DC 20210; telephone (202) 693-
2222.

SUPPLEMENTARY INFORMATION: 

I. Background

    The Department of Labor, as part of its continuing effort to reduce 
paperwork and respondent (i.e., employer) burden, conducts a 
preclearance consultation program to provide the public with an 
opportunity to comment on proposed and continuing information 
collection requirements in accord with the Paperwork Reduction Act of 
1995 (44 U.S.C. 3506(c)(2)(A)). This program ensures that information 
is in the desired format, reporting burden (time and costs) is minimal, 
collection instruments are clearly understood, and OSHA's estimate of 
the information collection burden is accurate. The Occupational Safety 
and Health Act of 1970 (the OSH Act) (29 U.S.C. 651 et seq.) authorizes 
information collection by employers as necessary or appropriate for 
enforcement of the OSH Act or for developing information regarding the 
causes and prevention of occupational injuries, illnesses, and 
accidents (29 U.S.C. 657). The OSH Act also requires that OSHA obtain 
such information with minimum burden upon employers, especially those 
operating small businesses, and to reduce to the maximum extent 
feasible unnecessary duplication of efforts in obtaining information 
(29 U.S.C. 657).
    The Standard on Dipping and Coating Operations (29 CFR 
1910.126(g)(4)) requires employers to post a conspicuous sign near each 
piece of electrostatic detearing equipment that notifies employees of 
the minimum safe distance they must maintain between goods undergoing 
electrostatic detearing and the electrodes or conductors of the 
equipment used in the process. Doing so reduces the likelihood of 
igniting the explosive chemicals used in electrostatic detearing 
operations.

II. Special Issues for Comment

    OSHA has a particular interest in comments on the following issues:
     Whether the proposed information collection requirement is 
necessary for the proper performance of the Agency's functions to 
protect workers, including whether the information is useful;
     The accuracy of OSHA's estimate of the burden (time and 
costs) of the information collection requirement, including the 
validity of the methodology and assumptions used;
     The quality, utility, and clarity of the information 
collected; and
     Ways to minimize the burden on employers who must comply; 
for example, by using automated or other technological information 
collection and transmission techniques.

III. Proposed Actions

    OSHA is requesting that OMB extend its approval of the information 
collection requirement contained in the Standard on Additional 
Requirements for Special Dipping and Coating Operations (Dip Tanks) (29 
CFR 1910.126(g)(4)). The Agency is requesting to retain its previous 
burden hour estimate of one (1) hour. This provision requires the 
employer to determine how far away goods being electrostatically 
deteared should be separated from electrodes or conductors. This 
distance is called the ``safe distance.'' This minimum distance must be 
displayed conspicuously on a sign located near the equipment.
    OSHA has determined that where electrostatic equipment is being 
used, the information has already been ascertained and that the ``safe 
distance'' has been displayed on a sign in a permanent manner. The 
Agency does not believe that this equipment is currently being 
manufactured or used due to changes in technology. OSHA does not 
believe there is any burden associated with the information collection 
requirement in the provision and is, therefore, estimating zero burden 
hours and no cost to the employer.
    The Agency will summarize the comments submitted in response to 
this notice, and will include this summary in the request to OMB.
    Type of Review: Extension of a currently approved information 
collection.
    Title: Additional Requirements for Special Dipping and Coating 
Operations (Dip Tanks) (29 CFR 1910.126(g)(4)).
    OMB Control Number: 1218-0237.

[[Page 21160]]

    Affected Public: Business or other for-profits; Federal Government; 
State, Local, or Tribal Government.
    Number of Respondents: 1.
    Frequency of Recordkeeping: On occasion.
    Total Responses: 1.
    Average Time Per Response: 0.
    Estimated Total Burden Hours: 1.
    Estimated Cost (Operation and Maintenance). $0.

IV. Public Participation--Submission of Comments on this Notice and 
Internet Access to Comments and Submissions

    You may submit comments in response to this document as follows: 
(1) Electronically at http://www.regulations.gov, which is the Federal 
eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. All 
comments, attachments, and other material must identify the Agency name 
and the OSHA docket number for the ICR (OSHA Docket No. OSHA-2010-
0020). You may supplement electronic submissions by uploading document 
files electronically. If you wish to mail additional materials in 
reference to an electronic or facsimile submission, you must submit 
them to the OSHA Docket Office (see the section of this notice titled 
ADDRESSES). The additional materials must clearly identify your 
electronic comments by your name, date, and the docket number so the 
Agency can attach them to your comments.
    Due to security procedures, the use of regular mail may cause a 
significant delay in the receipt of comments. For information about 
security procedures concerning the delivery of materials by hand, 
express delivery, messenger, or courier service, please contact the 
OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627).
    Comments and submissions are posted without change at http://www.regulations.gov. Therefore, OSHA cautions commenters about 
submitting personal information such as social security numbers and 
dates of birth. Although all submissions are listed in the http://www.regulations.gov index, some information (e.g., copyrighted 
material) is not publicly available to read or download through this 
Web site. All submissions, including copyrighted material, are 
available for inspection and copying at the OSHA Docket Office. 
Information on using the http://www.regulations.gov Web site to submit 
comments and access the docket is available at the Web site's ``User 
Tips'' link. Contact the OSHA Docket Office for information about 
materials not available through the Web site, and for assistance in 
using the Internet to locate docket submissions.

V. Authority and Signature

    David Michaels, Ph.D., MPH, Assistant Secretary of Labor for 
Occupational Safety and Health, directed the preparation of this 
notice. The authority for this notice is the Paperwork Reduction Act of 
1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 1-2012 
(77 FR 3912).

    Signed at Washington, DC, on April 3, 2013.
David Michaels,
Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2013-08182 Filed 4-8-13; 8:45 am]
BILLING CODE 4510-26-P


