
[Federal Register Volume 84, Number 24 (Tuesday, February 5, 2019)]
[Notices]
[Pages 1792-1794]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-01030]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2007-0039]


Intertek Testing Services NA, Inc.: Application for Expansion of 
Recognition

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: In this notice, OSHA announces the application of Intertek 
Testing Services NA, Inc., for expansion of recognition as a Nationally 
Recognized Testing Laboratory (NRTL) and presents the agency's 
preliminary finding to grant the application.

DATES: Submit comments, information, and documents in response to this 
notice, or requests for an extension of time to make a submission, on 
or before February 20, 2019.

ADDRESSES: Submit comments by any of the following methods:
    Electronically: You may submit comments and attachments 
electronically at: https://www.regulations.gov, which is the Federal 
eRulemaking Portal. Follow the instructions online for submitting 
comments.
    Facsimile: If your comments, including attachments, are not longer 
than 10 pages, you may fax them to the OSHA Docket Office at (202) 693-
1648.
    Mail, hand delivery, express mail, messenger, or courier service: 
When using this method, you must submit a copy of your comments and 
attachments to the OSHA Docket Office, Docket No. OSHA-2007-0039, 
Occupational Safety and Health Administration, U.S. Department of 
Labor, Room N-3653, 200 Constitution Avenue NW, Washington, DC 20210. 
Deliveries (hand, express mail, messenger, and courier service) are 
accepted during the Docket Office's normal business hours, 10:00 a.m. 
to 3:00 p.m., ET.
    Instructions: All submissions must include the agency name and the 
OSHA docket number (OSHA-2007-0039). OSHA places comments and other 
materials, including any personal information, in the public docket 
without revision, and these materials will be available online at 
http://www.regulations.gov. For further information on submitting 
comments, see the ``Public Participation'' heading in the section of 
this notice titled SUPPLEMENTARY INFORMATION:
    Docket: To read or download comments or other material in the 
docket, go to https://www.regulations.gov or the OSHA Docket Office at 
the above address. All documents in the docket (including this Federal 
Register notice) are listed in the https://www.regulations.gov index; 
however, some information (e.g., copyrighted material) is not publicly 
available to read or download through the website. All submissions, 
including copyrighted material, are available for inspection at the 
OSHA Docket Office.
    Extension of comment period: Submit requests for an extension of 
the comment period on or before February 20, 2019 to the Office of 
Technical Programs and Coordination Activities, Directorate of 
Technical Support and Emergency Management, Occupational Safety and 
Health Administration, U.S. Department of Labor, 200 Constitution

[[Page 1793]]

Avenue NW, Room N-3653, Washington, DC 20210, or by fax to (202) 693-
1644.

FOR FURTHER INFORMATION CONTACT: Information regarding this notice is 
available from the following sources:
    Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office 
of Communications, U.S. Department of Labor, telephone: (202) 693-1999; 
email: meilinger.francis2@dol.gov.
    General and technical information: Contact Mr. Kevin Robinson, 
Director, Office of Technical Programs and Coordination Activities, 
Directorate of Technical Support and Emergency Management, Occupational 
Safety and Health Administration, U.S. Department of Labor, phone: 
(202) 693-2110 or email: robinson.kevin@dol.gov.

SUPPLEMENTARY INFORMATION: 

I. Notice of the Application for Expansion

    OSHA is providing notice that Intertek Testing Services NA, Inc. 
(ITSNA), is applying for expansion of recognition as a NRTL. ITSNA 
requests the addition of three test standards to the NRTL scope of 
recognition.
    OSHA recognition of a NRTL signifies that the organization meets 
the requirements specified in 29 CFR 1910.7. Recognition is an 
acknowledgment that the organization can perform independent safety 
testing and certification of the specific products covered within the 
scope of recognition. Each NRTL's scope of recognition includes (1) the 
type of products the NRTL may test, with each type specified by its 
applicable test standard; and (2) the recognized site(s) that has/have 
the technical capability to perform the product-testing and product-
certification activities for test standards within the NRTL's scope. 
Recognition is not a delegation or grant of government authority; 
however, recognition enables employers to use products approved by the 
NRTL to meet OSHA standards that require product testing and 
certification.
    The agency processes applications by a NRTL for initial recognition 
and for an expansion or renewal of this recognition, following 
requirements in Appendix A to 29 CFR 1910.7. This appendix requires 
that the agency publish two notices in the Federal Register in 
processing an application. In the first notice, OSHA announces the 
application and provides a preliminary finding. In the second notice, 
the agency provides the final decision on the application. These 
notices set forth the NRTL's scope of recognition or modifications of 
that scope. OSHA maintains an informational web page for each NRTL, 
including ITSNA, which details the NRTL's scope of recognition. These 
pages are available from the OSHA website at http://www.osha.gov/dts/otpca/nrtl/index.html.
    ITSNA currently has fourteen facilities (sites) recognized by OSHA 
for product testing and certification, with its headquarters located 
at: Intertek Testing Services NA, Inc., 545 East Algonquin Road, Suite 
F, Arlington Heights, IL 60005. A complete list of ITSNA's scope of 
recognition is available at https://www.osha.gov/dts/otpca/nrtl/its.html.

II. General Background on the Application

    ITSNA submitted an application, dated July 12, 2018 (OSHA-2007-
0039-0029), to expand recognition to include three additional test 
standards. OSHA staff performed a detailed analysis of the application 
packet and reviewed other pertinent information. OSHA did not perform 
any on-site reviews in relation to this application.
    Table 1 lists the appropriate test standards found in ITSNA's 
application for expansion for testing and certification of products 
under the NRTL Program.

  Table 1--Proposed List of Appropriate Test Standards for Inclusion in
                    ITSNA's NRTL Scope of Recognition
------------------------------------------------------------------------
           Test standard                     Test standard title
------------------------------------------------------------------------
UL 1990...........................  Standard for Nonmetallic Underground
                                     Conduit with Conductors.
UL 60745-2-19.....................  Hand-Held Motor-Operated Electric
                                     Tools--Safety--Part 2-19:
                                     Particular Requirements For
                                     Jointers.
UL 60745-2-22.....................  Hand-Held Motor-Operated Electric
                                     Tools--Safety--Part 2-22:
                                     Particular Requirements For Cut-Off
                                     Machines.
------------------------------------------------------------------------

III. Preliminary Findings on the Application

    ITSNA submitted an acceptable application for expansion of the 
scope of recognition. OSHA's review of the application file, and 
pertinent documentation, indicate that ITSNA can meet the requirements 
prescribed by 29 CFR 1910.7 for expanding recognition to include the 
addition of these three test standards for NRTL testing and 
certification listed in Table 1. This preliminary finding does not 
constitute an interim or temporary approval of ITSNA's application.
    OSHA welcomes public comment as to whether ITSNA meets the 
requirements of 29 CFR 1910.7 for expansion of recognition as a NRTL. 
Comments should consist of pertinent written documents and exhibits. 
Commenters needing more time to comment must submit a request in 
writing, stating the reasons for the request. Commenters must submit 
the written request for an extension by the due date for comments. OSHA 
will limit any extension to 10 days unless the requester justifies a 
longer period. OSHA may deny a request for an extension if the request 
is not adequately justified. To obtain or review copies of the exhibits 
identified in this notice, as well as comments submitted to the docket, 
contact the Docket Office, Room N-3653, Occupational Safety and Health 
Administration, U.S. Department of Labor, at the above address. These 
materials also are available online at http://www.regulations.gov under 
Docket No. OSHA-2007-0039.
    OSHA staff will review all comments to the docket submitted in a 
timely manner. After addressing the issues raised by these comments, 
the agency will make a recommendation to the Assistant Secretary for 
Occupational Safety and Health whether to grant ITSNA's application for 
expansion of its scope of recognition. The Assistant Secretary will 
make the final decision on granting the application. In making this 
decision, the Assistant Secretary may undertake other proceedings 
prescribed in Appendix A to 29 CFR 1910.7.
    OSHA will publish a public notice of its final decision in the 
Federal Register.

IV. Authority and Signature

    Loren Sweatt, Deputy Assistant Secretary of Labor for Occupational 
Safety and Health, authorized the preparation of this notice. 
Accordingly, the agency is issuing this notice pursuant to 29 U.S.C. 
657(g)(2), Secretary of Labor's Order No. 1-2012

[[Page 1794]]

(77 FR 3912, Jan. 25, 2012), and 29 CFR 1910.7.

    Signed at Washington, DC, on January 30, 2019.
Loren Sweatt,
Deputy Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2019-01030 Filed 2-4-19; 8:45 am]
 BILLING CODE 4510-26-P


