[Federal Register Volume 83, Number 47 (Friday, March 9, 2018)]
[Notices]
[Pages 10523-10524]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2018-04746]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2006-0028]


MET Laboratories, Inc.: Grant of Expansion of Recognition

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: In this notice, OSHA announces its final decision to expand 
the scope of recognition for MET Laboratories, Inc., as a Nationally 
Recognized Testing Laboratory (NRTL).

DATES: The expansion of the scope of recognition becomes effective on 
March 9, 2018.

FOR FURTHER INFORMATION CONTACT: Information regarding this notice is 
available from the following sources:
    Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office 
of Communications, phone: (202) 693-1999; email: 
[email protected].
    General and technical information: Contact Mr. Kevin Robinson, 
Director, Office of Technical Programs and Coordination Activities, 
Directorate of Technical Support and Emergency Management, Occupational 
Safety and Health Administration, U.S. Department of Labor, phone: 
(202) 693-2110; email: [email protected]. OSHA's web page includes 
information about the NRTL Program (see http://www.osha.gov/dts/otpca/nrtl/index.html).

SUPPLEMENTARY INFORMATION: 

I. Notice of Final Decision

    OSHA hereby gives notice of the expansion of the scope of 
recognition of MET Laboratories, Inc. (MET), as a NRTL. MET's expansion 
covers the addition of four test standards to its scope of recognition.
    OSHA recognition of a NRTL signifies that the organization meets 
the requirements specified by 29 CFR 1910.7. Recognition is an 
acknowledgment that the organization can perform independent safety 
testing and certification of the specific products covered within its 
scope of recognition and is not a delegation or grant of government 
authority. As a result of recognition, employers may use products 
properly approved by the NRTL to meet OSHA standards that require 
testing and certification of the products.
    The Agency processes applications by a NRTL for initial 
recognition, or for expansion or renewal of this recognition, following 
requirements in Appendix A to 29 CFR 1910.7. This appendix requires 
that the Agency publish two notices in the Federal Register in 
processing an application. In the first notice, OSHA announces the 
application and provides its preliminary finding and, in the second 
notice, the Agency provides its final decision on the application. 
These notices set forth the NRTL's scope of recognition or 
modifications of that scope. OSHA maintains an informational web page 
for each NRTL that details its scope of recognition. These pages are 
available from the Agency's website at http://www.osha.gov/dts/otpca/nrtl/index.html.
    MET submitted four applications, one dated July 7, 2015 (OSHA-2006-
0028-0037), two dated December 14, 2016

[[Page 10524]]

(OSHA-2006-0028-0038 and OSHA-2006-0028-0039), and a fourth dated 
January 11, 2017 (OSHA-2006-0028-0040), to expand its recognition to 
include four additional test standards. OSHA staff performed a 
comparability analysis and reviewed other pertinent information. OSHA 
did not perform any on-site reviews in relation to this application.
    OSHA published the preliminary notice announcing MET's expansion 
application in the Federal Register on December 18, 2017 (82 FR 60053). 
The Agency requested comments by January 2, 2018, but it received no 
comments in response to this notice. OSHA now is proceeding with this 
final notice to grant expansion of MET's scope of recognition.
    To obtain or review copies of all public documents pertaining to 
the MET's application, go to www.regulations.gov or contact the Docket 
Office, Occupational Safety and Health Administration. Docket No. OSHA-
2006-0028 contains all materials in the record concerning MET's 
recognition.

II. Final Decision and Order

    OSHA staff examined MET's expansion application, its capability to 
meet the requirements of the test standards, and other pertinent 
information. Based on its review of this evidence, OSHA finds that MET 
meets the requirements of 29 CFR 1910.7 for expansion of its 
recognition, subject to the limitation and conditions listed below. 
OSHA, therefore, is proceeding with this final notice to grant MET's 
scope of recognition. OSHA limits the expansion of MET's recognition to 
testing and certification of products for demonstration of conformance 
to the test standards listed in Table 1 below.

 Table 1--List of Appropriate Test Standards for Inclusion in MET's NRTL
                          Scope of Recognition
------------------------------------------------------------------------
        Test standard                     Test standard title
------------------------------------------------------------------------
UL 50E......................  Enclosures for Electrical Equipment,
                               Environmental Considerations.
UL 60079-1..................  Standard for Explosive Atmospheres--Part
                               1: Equipment Protection by Flameproof
                               Enclosures ``d''.
UL 60335-2-40...............  Household and Similar Electrical
                               Appliances--Safety--Part 2-40: Particular
                               Requirements for Electrical Heat Pumps,
                               Air Conditioners and Dehumidifiers.
UL 61800-5-1................  Standard for Adjustable Speed Electrical
                               Power Drive Systems--Part 5-1: Safety
                               Requirements--Electrical, Thermal and
                               Energy.
------------------------------------------------------------------------

    OSHA's recognition of any NRTL for a particular test standard is 
limited to equipment or materials for which OSHA standards require 
third-party testing and certification before using them in the 
workplace. Consequently, if a test standard also covers any products 
for which OSHA does not require such testing and certification, a 
NRTL's scope of recognition does not include these products.
    The American National Standards Institute (ANSI) may approve the 
test standards listed above as American National Standards. However, 
for convenience, we may use the designation of the standards-developing 
organization for the standard as opposed to the ANSI designation. Under 
the NRTL Program's policy (see OSHA Instruction CPL 1-0.3, Appendix C, 
paragraph XIV), any NRTL recognized for a particular test standard may 
use either the proprietary version of the test standard or the ANSI 
version of that standard. Contact ANSI to determine whether a test 
standard is currently ANSI-approved.

A. Conditions

    In addition to those conditions already required by 29 CFR 1910.7, 
MET must abide by the following conditions of the recognition:
    1. MET must inform OSHA as soon as possible, in writing, of any 
change of ownership, facilities, or key personnel, and of any major 
change in its operations as a NRTL, and provide details of the 
change(s);
    2. MET must meet all the terms of its recognition and comply with 
all OSHA policies pertaining to this recognition; and
    3. MET must continue to meet the requirements for recognition, 
including all previously published conditions on MET's scope of 
recognition, in all areas for which it has recognition.
    Pursuant to the authority in 29 CFR 1910.7, OSHA hereby expands the 
scope of recognition of MET, subject to the limitation and conditions 
specified above.

III. Authority and Signature

    Loren Sweatt, Deputy Assistant Secretary of Labor for Occupational 
Safety and Health, authorized the preparation of this notice. 
Accordingly, the Agency is issuing this notice pursuant to 29 U.S.C. 
657(g)(2), Secretary of Labor's Order No. 1-2012 (77 FR 3912, Jan. 25, 
2012), and 29 CFR 1910.7.

    Signed at Washington, DC, on March 5, 2018.
Loren Sweatt,
Deputy Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2018-04746 Filed 3-8-18; 8:45 am]
 BILLING CODE 4510-26-P


