
[Federal Register Volume 78, Number 242 (Tuesday, December 17, 2013)]
[Notices]
[Pages 76408-76410]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2013-29990]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

National Highway Traffic Safety Administration

[Docket No. NHTSA-2012-0074; Notice 2]


BMW of North America, LLC, Grant of Petition for Decision of 
Inconsequential Noncompliance

AGENCY: National Highway Traffic Safety Administration (NHTSA), 
Department of Transportation (DOT).

ACTION: Grant of Petition.

-----------------------------------------------------------------------

SUMMARY: BMW North America, LLC,\1\ a subsidiary of BMW AG 
(collectively referred to as BMW),\2\ has determined that certain model 
year (MY) 2012 BMW X3 SAV multipurpose passenger vehicles (MPV) 
manufactured between April 1, 2011 and March 14, 2012, do not fully 
comply with paragraph S4.3.3 of Federal Motor Vehicle Safety Standard 
(FMVSS) No. 110, Tire selection and rims and motor home/recreation 
vehicle trailer load carrying capacity information for motor vehicles 
with a GVWR of 4,536 kilograms (10,000 pounds) or less. BMW has filed 
an appropriate report dated March 28, 2012, pursuant to 49 CFR part 
573, Defect and Noncompliance Responsibility and Reports.
---------------------------------------------------------------------------

    \1\ BMW North America, LLC is a U.S. company that manufactures 
and imports motor vehicles.
    \2\ BMW AG is a German company that manufactures motor vehicles.

ADDRESSES: For further information on this decision contact Ms. Amina 
Fisher, Office of Vehicle Safety Compliance, the National Highway 
Traffic Safety Administration (NHTSA), telephone (202) 366-1018, 
---------------------------------------------------------------------------
facsimile (202) 366-5930.

SUPPLEMENTARY INFORMATION: 
    I. BMW's Petition: Pursuant to 49 U.S.C. 30118(d) and 30120(h) and 
the rule implementing those provisions at 49 CFR part 556, BMW has 
petitioned for an exemption from the notification and remedy 
requirements of 49 U.S.C. Chapter 301 on the basis that this 
noncompliance is inconsequential to motor vehicle safety.
    Notice of receipt of the petition was published, with a 30-day 
public comment period, on October 16, 2012 in the Federal Register (77 
FR 63415). One comment was received from Anne K. Mayer which supported 
granting BMW's petition. To view the petition, the comment and all 
supporting documents log onto the Federal Docket Management System 
(FDMS) Web site at: http://www.regulations.gov/. Then follow the online 
search instructions to locate docket number ``NHTSA-2012-0074.''
    II. Vehicles Involved: Affected are approximately 1,409 MY 2012 BMW 
X3 SAV MPVs manufactured between April 1, 2011 through March 14, 2012.
    III. Rule Text: Section S4.3.3 of FMVSS No. 110 specifically 
states:

    S4.3.3 Additional labeling information for vehicles other than 
passenger cars. Each vehicle shall show the size designation and, if 
applicable, the type designation of rims (not necessarily those on 
the vehicle) appropriate for the tire appropriate for use on that 
vehicle, including the tire installed as original equipment on the 
certification label required by part 567.4 or part 567.5 of this 
chapter. This information shall be in the English language, lettered 
in block capitals and numerals not less than 2.4 millimeters high 
and in the following format:

GVWR: 2,441 kilograms (5381 pounds).
GAWR: Front--1,299 kilograms (2,864 pounds) with P265/70R16 tires, 
16 x 8.0 rims at 248 kPa (36 psi) cold single.
GAWR: Rear--1,299 kilograms (2,864 pounds) with P265/70R16 tires, 16 
x 8.00 rims, at 248 kPa (36 psi) cold single.


[[Page 76409]]


    IV. Summary of BMW's Analyses: BMW explained that the noncompliance 
is that the certification label required by 49 CFR part 567 does not 
list rim information for the tires installed on the vehicles as 
original equipment as required by paragraph S4.3.3 of FMVSS No. 110.
    BMW states that while the certification label required by 49 CFR 
part 567 does not contain tire and rim information for tires and rims 
that were installed as original equipment, the information pertains to 
tires and rims that are appropriate for use on the vehicles. BMW also 
argues that the noncompliance is inconsequential to motor vehicle 
safety for the following reasons:
    1. If a driver only checks the certification label (which indicates 
either 17-inch tires or 18-inch tires) or if the driver checks the 
certification label and the FMVSS No. 110 tire and loading information 
Vehicle Placard (which shows the size of the tires originally installed 
on the vehicle), and is unsure as to the proper inflation pressure and 
the size of the tires installed on the vehicle, there are a number of 
information sources and services available which can be used to inform 
the driver of the correct tire size and tire pressure.
    a. A driver could check the specific tires installed on the 
vehicle. The information that is stamped onto the sidewall of those 
tires corresponds to the information contained on the FMVSS No. 110 
tire and loading information Vehicle Placard. A driver would be able to 
determine that the tires installed on the vehicle correspond to the 
tires indicated on the FMVSS No. 110 tire and loading information 
Vehicle Placard. Therefore, a driver would be able to add the correct 
amount of air pressure to the tires in order to achieve the proper 
inflation level.
    b. If the driver were to use the tire size shown on the 
certification label in order to look up the associated tire pressure in 
the owner's manual and then pressurize the tires to that pressure the 
Tire Pressure Monitoring System would not need to initiate.
    c. The driver will also be able to refer to the vehicle's Owner's 
Manual which contains information pertaining to the various tire sizes 
and tire pressures for the affected vehicles.
    d. BMW also offers Roadside Assistance and BMW AssistTM 
(only included with Premium Package and as a stand-alone option) which 
are available 24 hours/day with representatives that are available to 
provide drivers with all of the available tires sizes and 
specifications for the affected vehicles.
    BMW has received no customer complaints and are unaware of any 
accidents or injuries regarding this noncompliance of the affected 
vehicles.
    BMW has additionally informed NHTSA that it has corrected future 
production and that all other required markings are present and 
correct.
    BMW also explains that NHTSA has previously granted similar 
petitions.
    In summation, BMW believes that the described noncompliance of the 
subject vehicles is inconsequential to motor vehicle safety, and that 
its petition, to exempt from providing recall notification of 
noncompliance as required by 49 U.S.C. 30118 and remedying the recall 
noncompliance as required by 49 U.S.C. 30120 should be granted.
    V. NHTSA Analysis and Reasoning: The affected vehicles, 1,409 2012 
BMW X3/SAVs (MPVs), comply with FMVSS No. 110, paragraph S4.3(c) and 
(d), identifying the recommended cold inflation pressures for the 
front, rear and spare tires and the tire size designations, 
respectively. The vehicles do not comply with paragraph S4.3.3, which 
requires additional information for vehicles other than passenger cars: 
the tires and rims must be identified on the 49 CFR part 567 
certification label. BMW's certification label listed the tire and rim 
size for the front and rear axles as 245/50R18, which is different from 
the tires installed on affected vehicles, 245/45R19. Note: Information 
for these vehicles states they were sold with either 18-inch or 19-inch 
diameter tires.
    BMW's FMVSS No. 110 vehicle placard listed size 245/45R19 for the 
front and rear tires with recommended inflation pressures 220 kPa/32 
psi and 260 kPa/38 psi, respectively). The load ratings from the Tire 
and Rim Association Handbook at those pressures are 675 kg/1,488 lb 
(front) and 750 kg/1673 lb (rear). Paragraph S4.2.2.2 specifies that 
the load rating for a passenger car tire used on an MPV be divided by 
1.1. The sum of the front axle tire ratings are 1,227 kg/2,705 lb and 
the rear axle tires are 1,364 kg/3,007 lb. Tire size 245/50R18 at 220 
kPa/32 psi (front) and 240 kPa/35 psi (rear--the maximum pressure 
listed) are rated at 745 kg/1,642 lb (front) and 775 kg/1,709 lb 
(rear). The resulting sums are 1,355 kg/2,987 lb (front) and 1,409 kg/
3,106 lb (rear). In both cases, the sums of the tire load ratings 
exceed BMW's GAWRs of 1,110 kg/2447 lb (front) and 1,290 kg/2,844 lb 
(rear).
    Two additional factors were considered: the difference between the 
maximum inflation pressures of the two tire sizes and the effect of 
those pressures on the vehicle's tire pressure monitoring system, 
required by FMVSS No. 138.
    The non-installed tires listed on the certification label have a 
maximum inflation pressure which is lower than the inflation pressure 
listed on the vehicle placard. If a consumer purchased replacement 
tires based on the 18-inch size listed on the certification label, he 
would also need to purchase rims of the same diameter. Even if the 18-
inch diameter tires and rims were installed, each tire's maximum 
inflation pressure is still specified on the sidewall and listed in 
other documents available to tire dealers.
    Regarding the TPMS, there is no adverse effect for either size 
front tires at 220 kPa/32 psi. The higher recommended inflation 
pressure of the installed 19-inch diameter rear tires corresponds to a 
required warning at 25 percent below the recommended pressure, i.e., at 
195 kPa/28 psi. If the 19-inch diameter tires are replaced with 18-inch 
tires, the warning would be required at 180 kPa/26 psi, which is equal 
to a 19 percent under-inflation condition for those tires, exceeding 
the FMVSS No. 138 requirement.
    VI. NHTSA Decision: Thus, NHTSA has determined that BMW has met its 
burden of persuasion that the FMVSS No. 110 noncompliance of the tire 
size labeling on the subject vehicles' certification label is 
inconsequential to motor vehicle safety. Accordingly, BMW's petition is 
hereby granted, and BMW is exempted from the obligation of providing 
notification of, and a remedy for, the subject noncompliance under 49 
U.S.C. 30118 and 30120.
    NHTSA notes that the statutory provisions (49 U.S.C. 30118(d) and 
30120(h)) that permit manufacturers to file petitions for a 
determination of inconsequentiality allow NHTSA to exempt manufacturers 
only from the duties found in sections 30118 and 30120, respectively, 
to notify owners, purchasers, and dealers of a defect or noncompliance 
and to remedy the defect or noncompliance. Therefore, this decision 
only applies to the 1,409 vehicles that BMW no longer controlled at the 
time it determined that a noncompliance existed. However, the granting 
of this petition does not relieve distributors and dealers of the 
prohibitions on the sale, offer for sale, or introduction or delivery 
for introduction into interstate commerce of the noncompliant vehicles 
under their control after BMW notified them that the subject 
noncompliance existed.


[[Page 76410]]


    Authority: (49 U.S.C. 30118, 30120: delegations of authority at 
49 CFR 1.95 and 501.8)

    Issued on: December 11, 2013.
Claude H. Harris,
Director, Office of Vehicle Safety Compliance.
[FR Doc. 2013-29990 Filed 12-16-13; 8:45 am]
BILLING CODE 4910-59-P


