
[Federal Register: July 28, 2009 (Volume 74, Number 143)]
[Rules and Regulations]               
[Page 37176]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr28jy09-8]                         

=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

National Highway Traffic Safety Administration

49 CFR Part 571

[Docket No. NHTSA-2009-0116]
RIN 2127-AK35

 
Federal Motor Vehicle Safety Standards; Door Locks and Door 
Retention Components, Correction

AGENCY: National Highway Traffic Safety Administration (NHTSA), 
Department of Transportation (DOT).

ACTION: Final rule; correction.

-----------------------------------------------------------------------

SUMMARY: NHTSA published in the Federal Register of July 20, 2009, a 
document delaying the compliance date of the sliding door provisions of 
a February 6, 2007 final rule. The regulatory text adopted by that 
document contained errors. This document corrects those errors.

DATES: Effective on September 1, 2009.

FOR FURTHER INFORMATION CONTACT: Ms. Sarah Alves, NHTSA Office of the 
Chief Counsel, DOT, 1200 New Jersey Avenue, SE., Washington, DC 20590, 
telephone (202) 366-2992, fax (202) 366-3820.

SUPPLEMENTARY INFORMATION: 

Background

    NHTSA published in the Federal Register of July 20, 2009 (74 FR 
35131), a document delaying the compliance date of the sliding door 
provisions of a February 6, 2007 final rule (FR Doc. E9-17078). In the 
regulatory text adopted by that document, in S4.2.2.3, a statement 
erroneously reads: ``This S4.2.2.3 applies to vehicle manufactured on 
or after September 1, 2010.'' The statement should read: ``This S4.2.2 
applies to vehicles manufactured on or after September 1, 2010.'' This 
document corrects that error.

Correction of Publication

    In rule FR Doc. E9-17078 published on July 20, 2009 (74 FR 35131), 
make the following correction. On page 35135, in the third column, 
S4.2.2.3 is corrected to read as follows:
    S4.2.2.3 This S4.2.2 applies to vehicles manufactured on or after 
September 1, 2010.

    Issued: July 23, 2009.
Stephen R. Kratzke,
Associate Administrator for Rulemaking.
[FR Doc. E9-17918 Filed 7-27-09; 8:45 am]

BILLING CODE 4910-59-P
