[Federal Register Volume 86, Number 163 (Thursday, August 26, 2021)]
[Notices]
[Pages 47714-47716]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2021-18343]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Motor Carrier Safety Administration

[Docket No. FMCSA-2021-0119]


Parts and Accessories Necessary for Safe Operation; Application 
for an Exemption From Complete Innovations, Inc.

AGENCY: Federal Motor Carrier Safety Administration (FMCSA), DOT.

ACTION: Notice of application for exemption; request for comments.

-----------------------------------------------------------------------

[[Page 47715]]

SUMMARY: The Federal Motor Carrier Safety Administration (FMCSA) 
requests public comment on an application for exemption from Complete 
Innovations, Inc. (Complete Innovations) to allow its Vision 2.0 device 
to be mounted lower in the windshield on commercial motor vehicles than 
is currently permitted.

DATES: Comments must be received on or before September 27, 2021.

ADDRESSES: You may submit comments bearing the Federal Docket 
Management System (FDMS) Docket ID FMCSA-2021-0119 using any of the 
following methods:
     Website: http://www.regulations.gov. Follow the 
instructions for submitting comments on the Federal electronic docket 
site.
     Fax: 1-202-493-2251.
     Mail: Docket Management Facility, U.S. Department of 
Transportation, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 
20590-0001.
     Hand Delivery: Ground Floor, Room W12-140, DOT Building, 
1200 New Jersey Avenue SE, Washington, DC, between 9 a.m. and 5 p.m. 
E.T., Monday-Friday, except Federal holidays.
    Instructions: All submissions must include the Agency name and 
docket number for this notice. For detailed instructions on submitting 
comments and additional information on the exemption process, see the 
``Public Participation'' heading below. Note that all comments received 
will be posted without change to http://www.regulations.gov, including 
any personal information provided. Please see the ``Privacy Act'' 
heading for further information.
    Docket: For access to the docket to read background documents or 
comments received, go to http://www.regulations.gov or to Room W12-140, 
DOT Building, 1200 New Jersey Avenue SE, Washington, DC, between 9 a.m. 
and 5 p.m., Monday through Friday, except Federal holidays. To be sure 
someone is there to help you, please call (202) 366-9317 or (202) 366-
9826 before visiting Docket Operations.
    Privacy Act: In accordance with 5 U.S.C. 553(c), DOT solicits 
comments from the public to better inform its regulatory process. DOT 
posts these comments, without edit, including any personal information 
the commenter provides, to www.regulations.gov, as described in the 
system of records notice (DOT/ALL-14 FDMS), which can be reviewed at 
www.dot.gov/privacy.
    Public participation: The http://www.regulations.gov website is 
generally available 24 hours each day, 365 days each year. You may find 
electronic submission and retrieval help and guidelines under the 
``help'' section of the http://www.regulations.gov website as well as 
the DOT's http://docketsinfo.dot.gov website. If you would like 
notification that we received your comments, please include a self-
addressed, stamped envelope or postcard, or print the acknowledgment 
page that appears after submitting comments online.

FOR FURTHER INFORMATION CONTACT: Mr. Jose R. Cestero, Vehicle and 
Roadside Operations Division, Office of Carrier, Driver, and Vehicle 
Safety, MC-PSV, (202) 366-5541, Federal Motor Carrier Safety 
Administration, 1200 New Jersey Avenue SE, Washington, DC 20590-0001.

SUPPLEMENTARY INFORMATION:

I. Public Participation and Request for Comments

    FMCSA encourages you to participate by submitting comments and 
related materials.

Submitting Comments

    If you submit a comment, please include the docket number for this 
notice (FMCSA-2021-0119), indicate the specific section of this 
document to which the comment applies, and provide a reason for 
suggestions or recommendations. You may submit your comments and 
material online or by fax, mail, or hand delivery, but please use only 
one of these means. FMCSA recommends that you include your name and a 
mailing address, an email address, or a phone number in the body of 
your document so the Agency can contact you if it has questions 
regarding your submission.
    To submit your comments online, go to www.regulations.gov and put 
the docket number, ``FMCSA-2021-0119'' in the ``Keyword'' box, and 
click ``Search.'' When the new screen appears, click on ``Comment 
Now!'' button and type your comment into the text box in the following 
screen. Choose whether you are submitting your comment as an individual 
or on behalf of a third party and then submit. If you submit your 
comments by mail or hand delivery, submit them in an unbound format, no 
larger than 8\1/2\ by 11 inches, suitable for copying and electronic 
filing. If you submit comments by mail and would like to know that they 
reached the facility, please enclose a stamped, self-addressed postcard 
or envelope. FMCSA will consider all comments and material received 
during the comment period and may grant or not grant this application 
based on your comments.

II. Legal Basis

    FMCSA has authority under 49 U.S.C. 31315(b) to grant exemptions 
from certain parts of the Federal Motor Carrier Safety Regulations 
(FMCSRs). FMCSA must publish a notice of each exemption request in the 
Federal Register (49 CFR 381.315(a)). The Agency must provide the 
public an opportunity to inspect the information relevant to the 
application, including any safety analyses that have been conducted. 
The Agency must also provide an opportunity for public comment on the 
request.
    The Agency reviews safety analyses and public comments submitted 
and determines whether granting the exemption would likely achieve a 
level of safety equivalent to, or greater than, the level that would be 
achieved by the current regulation (49 CFR 381.305). The decision of 
the Agency must be published in the Federal Register (49 CFR 
381.315(b)) with the reasons for denying or granting the application 
and, if granted, the name of the person or class of persons receiving 
the exemption, and the regulatory provision from which the exemption is 
granted. The notice must also specify the effective period and explain 
the terms and conditions of the exemption. The exemption may be renewed 
(49 CFR 381.300(b)).

III. Background

    Under 49 CFR 381.315(a), FMCSA must publish a notice of each 
exemption request in the Federal Register. The Agency must provide the 
public with an opportunity to inspect the information relevant to the 
application, including any safety analyses that have been conducted. 
The Agency must also provide an opportunity for public comment on the 
request.
    The Agency reviews the safety analyses and the public comments and 
determines whether granting the exemption would likely achieve a level 
of safety equivalent to or greater than the level that would be 
achieved by the current regulation (49 CFR 381.305). The decision of 
the Agency must be published in the Federal Register (49 CFR 
381.315(b)). If the Agency denies the request, it must state the reason 
for doing so. If the decision is to grant the exemption, the notice 
must specify the person or class of persons receiving the exemption and 
the regulatory provision or provisions from which an exemption is 
granted. The notice must specify the effective period of the exemption 
(up to 5 years) and explain the terms and

[[Page 47716]]

conditions of the exemption. The exemption may be renewed (49 CFR 
381.315(c) and 49 CFR 381.300(b)).

IV. Complete Innovations' Application for Exemption

    The Federal Motor Carrier Safety Regulations require devices 
meeting the definition of ``vehicle safety technology,'' including 
Complete Innovations' Vision 2.0 device, to be mounted (1) not more 
than 4 inches below the upper edge of the area swept by the windshield 
wipers, or (2) not more than 7 inches above the lower edge of the area 
swept by the windshield wipers, and outside the driver's sight lines to 
the road and highway signs and signals. Complete Innovations has 
applied for an exemption from 49 CFR 393.60(e)(1) to allow its Vision 
2.0 device to be mounted lower in the windshield than is currently 
permitted. A copy of the application is included in the docket 
referenced at the beginning of this notice.

V. Request for Comments

    In accordance with 49 U.S.C. 31315(b)(6), FMCSA requests public 
comment from all interested persons on Complete Innovations' 
application for an exemption from 49 CFR 393.60(e)(1). All comments 
received before the close of business on the comment closing date 
indicated at the beginning of this notice will be considered and will 
be available for examination in the docket at the location listed under 
the Addresses section of this notice. Comments received after the 
comment closing date will be filed in the public docket and will be 
considered to the extent practicable. In addition to late comments, 
FMCSA will also continue to file, in the public docket, relevant 
information that becomes available after the comment closing date. 
Interested persons should continue to examine the public docket for new 
material.

Larry W. Minor,
Associate Administrator for Policy.
[FR Doc. 2021-18343 Filed 8-25-21; 8:45 am]
BILLING CODE 4910-EX-P


