[Federal Register Volume 84, Number 160 (Monday, August 19, 2019)]
[Notices]
[Page 42907]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-17720]


-----------------------------------------------------------------------

DEPARTMENT OF ENERGY

Federal Energy Regulatory Commission

[P-13160-011]


Red River Hydro, LLC; Notice of Application Accepted for Filing 
and Soliciting Comments, Motions To Intervene, and Protests

    Take notice that the following hydroelectric application has been 
filed with the Commission and is available for public inspection.
    a. Type of Application: Non-capacity amendment of license.
    b. Project No.: P-13160-011.
    c. Date Filed: December 10, 2018.
    d. Applicant: Red River Hydro, LLC.
    e. Name of Project: Overton Lock and Dam Hydroelectric Project.
    f. Location: The unconstructed project would be located at the U.S. 
Army Corps of Engineer's John H. Overton Lock and Dam on the Red River 
in Rapides Parish, Louisiana.
    g. Filed Pursuant to: Federal Power Act, 16 U.S.C. 791a-825r.
    h. Applicant Contact: Paul Jacob, Red River Hydro, LLC, c/o Rye 
Development, 745 Atlantic Ave., 8th Floor, Boston, MA 02111, (617) 
7010-3288.
    i. FERC Contact: Marybeth Gay, (202) 502-6125, 
Marybeth.Gay@ferc.gov or Korede Olagbegi, (202) 502-6268, 
Korede.Olagbegi@ferc.gov.
    j. Deadline for filing comments, motions to intervene, and protests 
is 30 days from the issuance of this notice by the Commission. The 
Commission strongly encourages electronic filing. Please file comments, 
motions to intervene, and protests using the Commission's eFiling 
system at http://www.ferc.gov/docs-filing/efiling.asp. Commenters can 
submit brief comments up to 6,000 characters, without prior 
registration, using the eComment system at http://www.ferc.gov/doc-sfiling/ecomment.asp. You must include your name and contact 
information at the end of your comments. For assistance, please contact 
FERC Online Support at FERCOnlineSupport@ferc.gov, (866) 208-3676 (toll 
free), or (202) 502-8659 (TTY). In lieu of electronic filing, please 
send a paper copy to: Secretary, Federal Energy Regulatory Commission, 
888 First Street NE, Washington, DC 20426. The first page of any filing 
should include docket number P-13160-011.
    k. Description of Request: The applicant proposes to replace the 
project's two authorized 26-megawatt (MW) turbine-generator units with 
six 8.1-MW turbine-generator units. The proposed action would reduce 
the total authorized installed capacity of the project from 52.0 to 
48.6 MW, and the hydraulic capacity from 33,200 to 29,658 cubic feet 
per second. To accommodate the change from two to six units, the 
applicant proposes to increase the size of the powerhouse from 214 feet 
long by 112 feet wide, to 133 feet long by 236 feet wide, and raise the 
foundation from an elevation of -20 feet to +3 feet, which it states 
will pose less of a construction risk. The applicant does not propose 
changes to any other aspects of the project.
    l. Locations of the Applications: A copy of the application is 
available for inspection and reproduction at the Commission's Public 
Reference Room, located at 888 First Street NE, Room 2A, Washington, DC 
20426, or by calling (202) 502-8371. The filing may also be viewed on 
the Commission's website at http://www.ferc.gov/docs-filing/elibrary.asp. Enter the docket number excluding the last three digits 
in the docket number field to access the document. You may also 
register online at http://www.ferc.gov/docs-filing/esubscription.asp to 
be notified via email of new filings and issuances related to this or 
other pending projects. For assistance, call 1-866-208-3676 or email 
FERCOnlineSupport@ferc.gov, for TTY, call (202) 502- 8659.
    m. Individuals desiring to be included on the Commission's mailing 
list should so indicate by writing to the Secretary of the Commission.
    n. Comments, Motions to Intervene, or Protests: Anyone may submit 
comments, a motion to intervene, or a protest in accordance with the 
requirements of Rules of Practice and Procedure, 18 CFR 385.210, .211, 
.214. In determining the appropriate action to take, the Commission 
will consider all protests or other comments filed, but only those who 
file a motion to intervene in accordance with the Commission's Rules 
may become a party to the proceeding. Any comments, motions to 
intervene, or protests must be received on or before the specified 
comment date for the particular application.
    o. Filing and Service of Responsive Documents: Any filing must (1) 
bear in all capital letters the title COMMENTS, MOTION TO INTERVENE, or 
PROTEST as applicable; (2) set forth in the heading the name of the 
applicant and the project number of the application to which the filing 
responds; (3) furnish the name, address, and telephone number of the 
person protesting or intervening; and (4) otherwise comply with the 
requirements of 18 CFR 385.2001 through 385.2005. All comments, motions 
to intervene, or protests must set forth their evidentiary basis and 
otherwise comply with the requirements of 18 CFR 4.34(b). All comments, 
motions to intervene, or protests should relate to project works which 
are the subject of the temporary variance request. Agencies may obtain 
copies of the application directly from the applicant. A copy of any 
protest or motion to intervene must be served upon each representative 
of the applicant specified in the particular application. If an 
intervener files comments or documents with the Commission relating to 
the merits of an issue that may affect the responsibilities of a 
particular resource agency, they must also serve a copy of the document 
on that resource agency. A copy of all other filings in reference to 
this application must be accompanied by proof of service on all persons 
listed in the service list prepared by the Commission in this 
proceeding, in accordance with 18 CFR 4.34(b) and 385.2010.

    Dated: August 13, 2019.
Kimberly D. Bose,
Secretary.
[FR Doc. 2019-17720 Filed 8-16-19; 8:45 am]
 BILLING CODE 6717-01-P


