
[Federal Register Volume 76, Number 210 (Monday, October 31, 2011)]
[Notices]
[Page 67181]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2011-28086]


-----------------------------------------------------------------------

DEPARTMENT OF ENERGY

Federal Energy Regulatory Commission

[Project No. 14256-000]


Windsor Machinery Co., Inc.; Notice of Preliminary Permit 
Application Accepted for Filing and Soliciting Comments, Motions To 
Intervene, and Competing Applications

    On August 15, 2011, Windsor Machinery Co., Inc. filed an 
application for a preliminary permit, pursuant to section 4(f) of the 
Federal Power Act (FPA), proposing to study the feasibility of the 
Braendly Hydroelectric Project to be located on Fishkill Creek in 
Dutchess County, New York. The sole purpose of a preliminary permit, if 
issued, is to grant the permit holder priority to file a license 
application during the permit term. A preliminary permit does not 
authorize the permit holder to perform any land-disturbing activities 
or otherwise enter upon lands or waters owned by others without the 
owners' express permission.
    The proposed project would redevelop an abandoned project and 
consist of: (1) An existing 130-foot-long, 18-foot-high cut stone with 
a concrete cap dam creating a reservoir with a surface area of 
approximately 3.04 acres and a total storage capacity of 15 acre-feet 
at a normal maximum operating elevation of 119.5 feet mean sea level 
(msl); (2) a new 5-foot-diameter, 200-foot-long penstock replacing an 
existing penstock in its entirety; (3) a new 35-foot-long by 35-foot-
wide 3-storey high powerhouse at the site of an original powerhouse 
containing one turbine unit with a rated capacity of 225 kilowatts; (4) 
an existing 10-foot-long by 5-foot-wide tailrace; (5) a new 480-volt, 
400-foot-long transmission line extending from the powerhouse to a 
nearby building; and (6) appurtenant facilities. The project would have 
an annual generation of 1,600 megawatt-hours.
    Applicant Contact: Sarah L. Bower, Windsor Machinery Co., Inc., 16 
Orbit Lane, Hopewell Junction, NY 12533; phone: (845) 897-4194.
    FERC Contact: Monir Chowdhury; phone: (202) 502-6736.
    Deadline for filing comments, motions to intervene, competing 
applications (without notices of intent), or notices of intent to file 
competing applications: 60 days from the issuance of this notice. 
Competing applications and notices of intent must meet the requirements 
of 18 CFR 4.36. Comments, motions to intervene, notices of intent, and 
competing applications may be filed electronically via the Internet. 
See 18 CFR 385.2001(a)(1)(iii) and the instructions on the Commission's 
Web site http://www.ferc.gov/docs-filing/efiling.asp. Commenters can 
submit brief comments up to 6,000 characters, without prior 
registration, using the eComment system at http://www.ferc.gov/docs-filing/ecomment.asp. You must include your name and contact information 
at the end of your comments. For assistance, please contact FERC Online 
Support at FERCOnlineSupport@ferc.gov or toll free at 1-(866) 208-3676, 
or for TTY, (202) 502-8659. Although the Commission strongly encourages 
electronic filing, documents may also be paper-filed. To paper-file, 
mail an original and seven copies to: Kimberly D. Bose, Secretary, 
Federal Energy Regulatory Commission, 888 First Street, NE., 
Washington, DC 20426.
    More information about this project, including a copy of the 
application, can be viewed or printed on the ``eLibrary'' link of the 
Commission's Web site at http://www.ferc.gov/docs-filing/elibrary.asp. 
Enter the docket number (P-14256-000) in the docket number field to 
access the document. For assistance, contact FERC Online Support.

    Dated: October 25, 2011.
Kimberly D. Bose,
Secretary.
[FR Doc. 2011-28086 Filed 10-28-11; 8:45 am]
BILLING CODE 6717-01-P


