[Federal Register Volume 88, Number 49 (Tuesday, March 14, 2023)]
[Rules and Regulations]
[Pages 15600-15604]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2023-05061]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2022-1645; Project Identifier MCAI-2022-00734-T; 
Amendment 39-22371; AD 2023-05-02]
RIN 2120-AA64


Airworthiness Directives; Airbus SAS Airplanes

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: The FAA is superseding Airworthiness Directive (AD) 2020-21-
10, which applied to certain Airbus SAS Model A318, A320, and A321 
series airplanes; and Model A319-111, -112, -113, -114, -115, -131, -
132, -133, -151N, and -153N airplanes; and AD 2022-07-08, which applied 
to all Airbus SAS Model A318, A319, A320 and A321 series airplanes. AD 
2020-21-10 and AD 2022-07-08 required revising the existing maintenance 
or inspection program, as applicable, to incorporate new or more 
restrictive airworthiness limitations. This AD was prompted by a 
determination that new or more restrictive airworthiness limitations 
are necessary. This AD continues to require the actions in AD 2020-21-
10 and AD 2022-07-08 and requires revising the existing maintenance or 
inspection program, as applicable, to incorporate additional new or 
more restrictive airworthiness limitations, as specified in a European 
Union Aviation Safety Agency (EASA) AD, which is incorporated by 
reference. The FAA is issuing this AD to address the unsafe condition 
on these products.

DATES: This AD is effective April 18, 2023.
    The Director of the Federal Register approved the incorporation by 
reference of a certain publication listed in this AD as of April 18, 
2023.
    The Director of the Federal Register approved the incorporation by 
reference of a certain other publication listed in this AD as of May 
19, 2022 (87 FR 22117, April 14, 2022).
    The Director of the Federal Register approved the incorporation by 
reference of a certain other publication listed in this AD as of 
November 19, 2020 (85 FR 65190, October 15, 2020).

ADDRESSES: 
    AD Docket: You may examine the AD docket at regulations.gov under 
Docket No. FAA-2022-1645; or in person at Docket Operations between 9 
a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD 
docket contains this final rule, the mandatory continuing airworthiness 
information (MCAI), any comments received, and other information. The 
address for Docket Operations is U.S. Department of Transportation, 
Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 
New Jersey Avenue SE, Washington, DC 20590.
    Material Incorporated by Reference:
     For EASA material incorporated by reference in this AD, 
contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone 
+49 221 8999 000; email [email protected]; website easa.europa.eu. You 
may find this material on the EASA website at ad.easa.europa.eu.
     You may view this service information at the FAA, 
Airworthiness Products Section, Operational Safety Branch, 2200 South 
216th St., Des Moines, WA. For information on the availability of this 
material at the FAA, call 206-231-3195. It is also available in the AD 
docket at regulations.gov under Docket No. FAA-2022-1645.

FOR FURTHER INFORMATION CONTACT: Dan Rodina, Aerospace Engineer, Large 
Aircraft Section, FAA, International Validation Branch, 2200 South 
216th St., Des Moines, WA 98198; telephone 206-231-3225; email 
[email protected].

SUPPLEMENTARY INFORMATION: 

Background

    The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 
CFR part 39 to supersede AD 2020-21-10, Amendment 39-21283 (85 FR 
65190,

[[Page 15601]]

October 15, 2020) (AD 2020-21-10) and AD 2022-07-08, Amendment 39-21996 
(87 FR 22117, April 14, 2022) (AD 2022-07-08).
    AD 2020-21-10 applied to certain Airbus SAS Model A318, A320, and 
A321 series airplanes, and Model A319-111, -112, -113, -114, -115, -
131, -132, -133, -151N, and -153N airplanes. AD 2020-21-10 required 
revising the existing maintenance or inspection program, as applicable, 
to incorporate new or more restrictive airworthiness limitations. The 
FAA issued AD 2020-21-10 to address the risks associated with the 
effects of aging on airplane systems. Such effects could change system 
characteristics, leading to an increased potential for failure of 
certain life-limited parts, and reduced structural integrity or 
controllability of the airplane.
    AD 2022-07-08 applied to all Airbus SAS Model A318, A319, A320, and 
A321 series airplanes. AD 2022-07-08 required inspections of certain 
trimmable horizontal stabilizer actuators (THSAs) and replacement if 
necessary, and revising the existing maintenance or inspection program, 
as applicable, to incorporate new or more restrictive airworthiness 
limitations. The FAA issued AD 2022-07-08 to address premature wear of 
the carbon friction disks on the no-back brake of the THSA, which could 
lead to reduced braking efficiency in certain load conditions, and, in 
conjunction with the inability of the power gear train to keep the ball 
screw in its last commanded position, could result in uncommanded 
movements of the trimmable horizontal stabilizer and loss of control of 
the airplane. AD 2022-07-08 also specified that accomplishing the 
revision required by that AD terminates certain requirements of AD 
2020-21-10. This AD continues to allow that termination.
    The NPRM published in the Federal Register on December 19, 2022 (87 
FR 77535). The NPRM was prompted by AD 2022-0102, dated June 8, 2022, 
issued by EASA, which is the Technical Agent for the Member States of 
the European Union (EASA AD 2022-0102) (referred to after this as the 
MCAI). The MCAI states that new or more restrictive airworthiness 
limitations have been developed to address the unsafe condition on 
these products, which, if not addressed, could result in an increased 
potential for failure of certain life-limited parts, and reduced 
structural integrity of the airplane. EASA AD 2022-0102 superseded EASA 
AD 2020-0034, dated February 25, 2020, and EASA AD 2020-0270, dated 
December 7, 2020 (which correspond to FAA AD 2020-21-10 and AD 2022-07-
08, respectively).
    EASA AD 2022-0102 specifies that the revised airworthiness 
limitations section document contains new tasks 274000-00002-1-E and 
274000-00003-1-E, which cover the inspections, corrective actions, and 
reporting previously required by EASA AD 2017-0237, dated December 4, 
2017 (which corresponds to FAA AD 2018-23-02, Amendment 39-19488 (83 FR 
59278, November 23, 2018) (AD 2018-23-02)). Accomplishing the revision 
of the existing maintenance or inspection program required by paragraph 
(n) of this AD terminates the requirements of paragraphs (g) through 
(k) of AD 2018-23-02 for Airbus SAS Model A318 series airplanes; Model 
A319-111, -112, -113, -114, -115, -131, -132, and -133 airplanes; Model 
A320-211, -212, -214, -216, -231, -232, and -233 airplanes; and Model 
A321-111, -112, -131, -211, -212, -213, -231, and -232 airplanes only.
    In the NPRM, the FAA proposed to continue to require the actions in 
AD 2020-21-10 and AD 2022-07-08. The NPRM also proposed to require 
revising the existing maintenance or inspection program, as applicable, 
to incorporate additional new or more restrictive airworthiness 
limitations, as specified in EASA AD 2022-0102. The FAA is issuing this 
AD to address the risks associated with the effects of aging on 
airplane systems. Such effects could change system characteristics. The 
unsafe condition, if not addressed, could result in an increased 
potential for failure of certain life-limited parts, and reduced 
structural integrity of the airplane.
    You may examine the MCAI in the AD docket at regulations.gov under 
Docket No. FAA-2022-1645.

Discussion of Final Airworthiness Directive

Comments

    The FAA received a comment from the Air Line Pilots Association, 
International (ALPA), who supported the NPRM without change.

Previous Alternative Methods of Compliance (AMOCs)

    Paragraphs (r)(1)(ii) and (iii) of the proposed AD allowed previous 
AMOCs as AMOCs for the corresponding provisions of paragraph (n) of the 
proposed AD (which contain new requirements). However, the AMOC 
paragraphs did not indicate that the previous AMOCs were allowed to 
continue to be AMOCs for the retained requirements in paragraphs (g), 
(h), (j), and (k) of the proposed AD. The FAA has added paragraphs 
(r)(1)(ii) and (iii) to this AD to allow previous AMOCs as AMOCs to the 
restated requirements of this AD and reidentified subsequent paragraphs 
accordingly.

Conclusion

    This product has been approved by the aviation authority of another 
country and is approved for operation in the United States. Pursuant to 
the FAA's bilateral agreement with this State of Design Authority, it 
has notified the FAA of the unsafe condition described in the MCAI 
referenced above. The FAA reviewed the relevant data, considered the 
comment received, and determined that air safety requires adopting this 
AD as proposed. Accordingly, the FAA is issuing this AD to address the 
unsafe condition on this product. Except for minor editorial changes, 
and any other changes described previously, this AD is adopted as 
proposed in the NPRM. None of the changes will increase the economic 
burden on any operator.

Related Service Information Under 1 CFR Part 51

    The FAA reviewed EASA AD 2022-0102, dated June 8, 2022, which 
specifies new or more restrictive airworthiness limitations for 
airplane structures and safe life limits.
    This AD requires EASA AD 2020-0270, dated December 7, 2020, which 
the Director of the Federal Register approved for incorporation by 
reference as of May 19, 2022 (87 FR 22117, April 14, 2022).
    This AD requires EASA AD 2020-0034, dated February 25, 2020, which 
the Director of the Federal Register approved for incorporation by 
reference as of November 19, 2020 (85 FR 65190, October 15, 2020).
    This material is reasonably available because the interested 
parties have access to it through their normal course of business or by 
the means identified in ADDRESSES.

Costs of Compliance

    The FAA estimates that this AD affects 1,864 airplanes of U.S. 
registry. The FAA estimates the following costs to comply with this AD:
    The FAA estimates the total cost per operator for the retained 
actions from AD 2020-21-10 to be $7,650 (90 work-hours x $85 per work-
hour).
    The FAA estimates the total cost per operator for the retained 
actions from AD 2022-07-08 to be $7,650 (90 work-hours x $85 per work-
hour).
    The FAA has determined that revising the existing maintenance or 
inspection program takes an average of 90 work-

[[Page 15602]]

hours per operator, although the agency recognizes that this number may 
vary from operator to operator. Since operators incorporate maintenance 
or inspection program changes for their affected fleet(s), the FAA has 
determined that a per-operator estimate is more accurate than a per-
airplane estimate.
    The FAA estimates the total cost per operator for the new actions 
to be $7,650 (90 work-hours x $85 per work-hour).

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. Subtitle VII: Aviation Programs, 
describes in more detail the scope of the Agency's authority.
    The FAA is issuing this rulemaking under the authority described in 
Subtitle VII, Part A, Subpart III, Section 44701: General requirements. 
Under that section, Congress charges the FAA with promoting safe flight 
of civil aircraft in air commerce by prescribing regulations for 
practices, methods, and procedures the Administrator finds necessary 
for safety in air commerce. This regulation is within the scope of that 
authority because it addresses an unsafe condition that is likely to 
exist or develop on products identified in this rulemaking action.

Regulatory Findings

    The FAA has determined that this AD will not have federalism 
implications under Executive Order 13132. This AD will not have a 
substantial direct effect on the States, on the relationship between 
the national government and the States, or on the distribution of power 
and responsibilities among the various levels of government.
    For the reasons discussed above, I certify that this AD:
    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866,
    (2) Will not affect intrastate aviation in Alaska, and
    (3) Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

The Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority:  49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by:
0
a. Removing Airworthiness Directive 2020-21-10, Amendment 39-21283 (85 
FR 65190, October 15, 2020); and AD 2022-07-08, Amendment 39-21996 (87 
FR 22117, April 14, 2022); and
0
b. Adding the following new airworthiness directive:

2023-05-02 Airbus SAS: Amendment 39-22371; Docket No. FAA-2022-1645; 
Project Identifier MCAI-2022-00734-T.

(a) Effective Date

    This airworthiness directive (AD) is effective April 18, 2023.

(b) Affected ADs

    (1) This AD replaces AD 2020-21-10, Amendment 39-21283 (85 FR 
65190, October 15, 2020) (AD 2020-21-10).
    (2) This AD replaces AD 2022-07-08, Amendment 39-21996 (87 FR 
22117, April 14, 2022) (AD 2022-07-08).
    (3) This AD affects AD 2018-23-02, Amendment 39-19488 (83 FR 
59278, November 23, 2018) (AD 2018-23-02).

(c) Applicability

    This AD applies to Airbus SAS airplanes identified in paragraphs 
(c)(1) through (4) of this AD, certificated in any category, with an 
original airworthiness certificate or original export certificate of 
airworthiness issued on or before February 18, 2022.
    (1) Model A318-111, -112, -121, and -122 airplanes.
    (2) Model A319-111, -112, -113, -114, -115, -131, -132, -133, -
151N, -153N, and -171N airplanes.
    (3) Model A320-211, -212, -214, -216, -231, -232, -233, -251N, -
252N, -253N, -271N, -272N, and -273N airplanes.
    (4) Model A321-111, -112, -131, -211, -212, -213, -231, -232, -
251N, -251NX, -252N, -252NX, -253N, -253NX, -271N, -271NX, -272N, 
and -272NX airplanes.

(d) Subject

    Air Transport Association (ATA) of America Code 05, Time Limits/
Maintenance Checks.

(e) Unsafe Condition

    This AD was prompted by a determination that additional new or 
more restrictive airworthiness limitations are necessary. The FAA is 
issuing this AD to address the risks associated with the effects of 
aging on airplane systems. Such effects could change system 
characteristics. The unsafe condition, if not addressed, could 
result in an increased potential for failure of certain life-limited 
parts, and reduced structural integrity of the airplane.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Retained Revision of the Existing Maintenance or Inspection Program 
From AD 2020-21-10, With No Changes

    This paragraph restates the requirements of paragraph (i) of AD 
2020-21-10, with no changes. For airplanes with an original 
airworthiness certificate or original export certificate of 
airworthiness issued on or before November 7, 2019, except for Model 
A319-171N airplanes: Except as specified in paragraph (h) of this 
AD: Comply with all required actions and compliance times specified 
in, and in accordance with, European Union Aviation Safety Agency 
(EASA) AD 2020-0034, dated February 25, 2020 (EASA AD 2020-0034). 
Accomplishing the revision of the existing maintenance or inspection 
program required by paragraph (n) of this AD terminates the 
requirements of this paragraph.

(h) Retained Exceptions to EASA AD 2020-0034, With No Changes

    This paragraph restates the exceptions specified in paragraph 
(j) of AD 2020-21-10, with no changes.
    (1) The requirements specified in paragraphs (1) and (2) of EASA 
AD 2020-0034 do not apply to this AD.
    (2) Paragraph (3) of EASA 2020-0034 specifies revising ``the 
AMP'' within 12 months after its effective date, but this AD 
requires revising the existing maintenance or inspection program, as 
applicable, to incorporate the ``tasks and associated thresholds and 
intervals'' specified in paragraph (3) of EASA 2020 0034 within 90 
days after November 19, 2020 (the effective date AD 2020-21-10).
    (3) The initial compliance time for doing the tasks specified in 
paragraph (3) of EASA AD 2020-0034 is at the applicable ``associated 
thresholds'' specified in paragraph (3) of EASA AD 2020-0034, or 
within 90 days after November 19, 2020 (the effective date AD 2020-
21-10), whichever occurs later.
    (4) The provisions specified in paragraphs (4) and (5) of EASA 
AD 2020-0034 do not apply to this AD.
    (5) The ``Remarks'' section of EASA AD 2020-0034 does not apply 
to this AD.

(i) Retained Provisions for Alternative Actions and Intervals From AD 
2020-21-10, With a New Exception

    This paragraph restates the requirements of paragraph (k) of AD 
2020-21-10, with a new exception. Except as required by paragraph 
(n) of this AD, after the maintenance or inspection program has been 
revised as required by paragraph (g) of this AD, no alternative 
actions (e.g., inspections) and intervals are allowed unless they 
are approved as specified in the provisions of the ``Ref. 
Publications'' section of EASA AD 2020-0034.

[[Page 15603]]

(j) Retained Revision of the Existing Maintenance or Inspection Program 
From AD 2022-07-08, With No Changes

    This paragraph restates the requirements of paragraph (l) of AD 
2022-07-08, with no changes. Accomplishing the revision of the 
existing maintenance or inspection program required by paragraph (n) 
of this AD terminates the requirements of this paragraph.
    (1) For airplanes with an original airworthiness certificate or 
original export certificate of airworthiness issued on or before 
October 5, 2020, except as specified in paragraph (k) of this AD: 
Comply with all required actions and compliance times specified in, 
and in accordance with, EASA AD 2020-0270, dated December 7, 2020 
(EASA AD 2020-0270).
    (2) For airplanes with an original airworthiness certificate or 
original export certificate of airworthiness issued after October 5, 
2020, revise the existing maintenance or inspection program, as 
applicable, to incorporate the provision specified in paragraph 
(k)(7) of this AD.

(k) Retained Exceptions to EASA AD 2020-0270, With No Changes

    This paragraph restates the exceptions specified in paragraph 
(m) of AD 2022-07-08, with no changes.
    (1) Where EASA AD 2020-0270 refers to its effective date, this 
AD requires using May 19, 2022 (the effective date AD 2022-07-08).
    (2) The requirements specified in paragraphs (1) and (2) of EASA 
AD 2020-0270 do not apply to this AD.
    (3) Paragraph (3) of EASA AD 2020-0270 specifies revising ``the 
approved AMP'' within 12 months after its effective date, but this 
AD requires revising the existing maintenance or inspection program, 
as applicable, within 90 days after May 19, 2022 (the effective date 
AD 2022-07-08).
    (4) The initial compliance time for doing the tasks specified in 
paragraph (3) of EASA AD 2020-0270 is at the applicable 
``limitations'' as incorporated by the requirements of paragraph (3) 
of EASA AD 2020-0270, or within 90 days after May 19, 2022 (the 
effective date AD 2022-07-08), whichever occurs later.
    (5) The provisions specified in paragraph (4) of EASA AD 2020-
0270 do not apply to this AD.
    (6) The ``Remarks'' section of EASA AD 2020-0270 does not apply 
to this AD.
    (7) For all airplanes identified in paragraph (c) of this AD: 
Where the Note for Item 274000-00004-1-E of Section 4-1 in the 
service information referenced in EASA AD 2020-0270 specifies ``NBB 
carbon disc replacement'' instructions, for this AD, replace the 
text ``NBB carbon disc replacement can be accomplished in accordance 
with SB A320-27-1242 or VSB 47145-27-17,'' with ``NBB carbon disk 
replacement must be accomplished in accordance with SB A320-27-
1242.''

(l) Retained Provisions for Alternative Actions and Intervals AD 2022-
07-08, With a New Exception

    This paragraph restates the requirements of paragraph (n) of AD 
2022-07-08, with a new exception. Except as required by paragraph 
(n) of this AD, after the maintenance or inspection program has been 
revised as required by paragraph (j) of this AD, no alternative 
actions (e.g., inspections) or intervals are allowed unless they are 
approved as specified in the provisions of the ``Ref. Publications'' 
section of EASA AD 2020-0270.

(m) Retained Terminating Action for Certain Requirements of Paragraph 
(g) of This AD

    This paragraph restates the terminating action specified in 
paragraph (o) of AD 2022-07-08. Accomplishing the actions required 
by paragraph (j) of this AD terminates the airworthiness limitations 
section (ALS) limitation task 274000-00004-1-E for the trimmable 
horizontal stabilizer actuator (THSA), as required by paragraph (g) 
of this AD.

(n) New Revision of the Existing Maintenance or Inspection Program

    Except as specified in paragraph (o) of this AD, comply with all 
required actions and compliance times specified in, and in 
accordance with, EASA AD 2022-0102, dated June 8, 2022 (EASA AD 
2022-0102). Accomplishing the revision of the existing maintenance 
or inspection program required by this paragraph terminates the 
requirements of paragraphs (g) and (j) of this AD.

(o) Exceptions to EASA AD 2022-0102

    (1) This AD does not adopt the requirements specified in 
paragraphs (1) and (2) of EASA AD 2022-0102.
    (2) Paragraph (3) of EASA AD 2022-0102 specifies revising ``the 
approved AMP'' within 12 months after its effective date, but this 
AD requires revising the existing maintenance or inspection program, 
as applicable, within 90 days after the effective date of this AD.
    (3) The initial compliance time for doing the tasks specified in 
paragraph (3) of EASA AD 2022-0102 is at the applicable 
``limitations'' and ``associated thresholds'' as incorporated by the 
requirements of paragraph (3) of EASA AD 2022-0102, or within 90 
days after the effective date of this AD, whichever occurs later.
    (4) This AD does not adopt the provisions specified in 
paragraphs (4) and (5) of EASA AD 2022-0102.
    (5) This AD does not adopt the ``Remarks'' section of EASA AD 
2022-0102.

(p) New Provisions for Alternative Actions and Intervals

    After the existing maintenance or inspection program has been 
revised as required by paragraph (n) of this AD, no alternative 
actions (e.g., inspections) or intervals are allowed unless they are 
approved as specified in the provisions of the ``Ref. Publications'' 
section of EASA AD 2022-0102.

(q) New Terminating Action for Certain Requirements of AD 2018-23-02

    Accomplishing the revision of the existing maintenance or 
inspection program required by paragraph (n) of this AD terminates 
the requirements of paragraphs (g) through (k) of AD 2018-23-02 for 
Airbus SAS Model A318 series airplanes; Model A319-111, -112, -113, 
-114, -115, -131, -132, and -133 airplanes; Model A320-211, -212, -
214, -216, -231, -232, and -233 airplanes; and Model A321-111, -112, 
-131, -211, -212, -213, -231, and -232 airplanes only.

(r) Additional AD Provisions

    The following provisions also apply to this AD:
    (1) Alternative Methods of Compliance (AMOCs): The Manager, 
International Validation Branch, FAA, has the authority to approve 
AMOCs for this AD, if requested using the procedures found in 14 CFR 
39.19. In accordance with 14 CFR 39.19, send your request to your 
principal inspector or responsible Flight Standards Office, as 
appropriate. If sending information directly to the International 
Validation Branch, send it to the attention of the person identified 
in paragraph (s) of this AD.
    (i) Before using any approved AMOC, notify your appropriate 
principal inspector, or lacking a principal inspector, the manager 
of the responsible Flight Standards Office.
    (ii) AMOCs approved previously for AD 2020-21-10 are approved as 
AMOCs for the corresponding provisions of paragraphs (g) and (h) of 
this AD.
    (iii) AMOCs approved previously for AD 2022-07-08 are approved 
as AMOCs for the corresponding provisions of paragraphs (j) and (k) 
of this AD.
    (iv) AMOCs approved previously for AD 2020-21-10 are approved as 
AMOCs for the corresponding provisions of EASA AD 2022-0102 that are 
required by paragraph (n) of this AD.
    (v) AMOCs approved previously for AD 2022-07-08 are approved as 
AMOCs for the corresponding provisions of EASA AD 2022-0102 that are 
required by paragraph (n) of this AD.
    (2) Contacting the Manufacturer: For any requirement in this AD 
to obtain instructions from a manufacturer, the instructions must be 
accomplished using a method approved by the Manager, International 
Validation Branch, FAA; or EASA; or Airbus SAS's EASA Design 
Organization Approval (DOA). If approved by the DOA, the approval 
must include the DOA-authorized signature.

(s) Additional Information

    For more information about this AD, contact Dan Rodina, 
Aerospace Engineer, Large Aircraft Section, FAA, International 
Validation Branch, 2200 South 216th St., Des Moines, WA 98198; 
telephone 206-231-3225; email [email protected].

(t) Material Incorporated by Reference

    (1) The Director of the Federal Register approved the 
incorporation by reference (IBR) of the service information listed 
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
    (2) You must use this service information as applicable to do 
the actions required by this AD, unless the AD specifies otherwise.
    (3) The following service information was approved for IBR on 
April 18, 2023.
    (i) European Union Aviation Safety Agency (EASA) AD 2022-0102, 
dated June 8, 2022.
    (ii) [Reserved]

[[Page 15604]]

    (4) The following service information was approved for IBR on 
May 19, 2022 (87 FR 22117, April 14, 2022).
    (i) European Union Aviation Safety Agency (EASA) AD 2020-0270, 
dated December 7, 2020.
    (ii) [Reserved]
    (5) The following service information was approved for IBR on 
November 19, 2020 (85 FR 65190, October 15, 2020).
    (i) European Union Aviation Safety Agency (EASA) AD 2020-0034, 
dated February 25, 2020.
    (ii) [Reserved]
    (6) For EASA ADs 2022-0102, 2020-0270, and 2020-0034, contact 
EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 
221 8999 000; email [email protected]; website easa.europa.eu. You 
may find these EASA ADs on the EASA website at ad.easa.europa.eu.
    (7) You may view this service information at FAA, Airworthiness 
Products Section, Operational Safety Branch, 2200 South 216th St., 
Des Moines, WA. For information on the availability of this material 
at the FAA, call 206-231-3195.
    (8) You may view this service information that is incorporated 
by reference at the National Archives and Records Administration 
(NARA). For information on the availability of this material at 
NARA, email [email protected], or go to: www.archives.gov/federal-register/cfr/ibr-locations.html.

    Issued on March 2, 2023.
Christina Underwood,
Acting Director, Compliance & Airworthiness Division, Aircraft 
Certification Service.
[FR Doc. 2023-05061 Filed 3-13-23; 8:45 am]
BILLING CODE 4910-13-P


