[Federal Register Volume 88, Number 58 (Monday, March 27, 2023)]
[Rules and Regulations]
[Pages 18016-18019]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2023-06044]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2022-1170; Project Identifier AD-2022-00023-T; 
Amendment 39-22345; AD 2023-03-20]
RIN 2120-AA64


Airworthiness Directives; The Boeing Company Airplanes

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: The FAA is adopting a new airworthiness directive (AD) for all 
The Boeing Company Model 747-400, -400D, and -400F series airplanes. 
This AD was prompted by the FAA's analysis of the Model 747 airplane 
fuel system reviews conducted by the manufacturer, and by the 
determination that new or more restrictive airworthiness limitations 
are necessary. This AD requires revising the existing maintenance or 
inspection program, as applicable, to incorporate new or more 
restrictive airworthiness limitations. The FAA is issuing this AD to 
address the unsafe condition on these products.

DATES: This AD is effective May 1, 2023.
    The Director of the Federal Register approved the incorporation by 
reference of a certain publication listed in this AD as of May 1, 2023.

ADDRESSES: 
    AD Docket: You may examine the AD docket at regulations.gov by 
searching for and locating Docket No. FAA-2022-1170; or in person at 
Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, 
except Federal holidays. The AD docket contains this final rule, any 
comments received, and other information. The address for Docket 
Operations is U.S. Department of Transportation, Docket Operations, M-
30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue 
SE, Washington, DC 20590.
    Material Incorporated by Reference:
     For service information identified in this final rule, 
contact Boeing Commercial Airplanes, Attention: Contractual & Data 
Services (C&DS), 2600 Westminster Blvd., MC 110-SK57, Seal Beach, CA 
90740-5600; phone: (562) 797-1717; website: myboeingfleet.com.
     You may view this service information at the FAA, 
Airworthiness Products Section, Operational Safety Branch, 2200 South 
216th St., Des Moines, WA. For information on the availability of this 
material at the FAA, call (206) 231-3195. It is also available at 
regulations.gov by searching for and locating Docket No. FAA-2022-1170.

FOR FURTHER INFORMATION CONTACT: Samuel Dorsey, Aerospace Engineer, 
Propulsion Section, FAA, Seattle ACO Branch, 2200 South 216th St., Des 
Moines, WA 98198; phone: (206) 231-3415; email [email protected].

SUPPLEMENTARY INFORMATION:

Background

    The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 
CFR part 39 by adding an AD that would apply to all The Boeing Company 
Model 747-400, -400D, and -400F series airplanes. The NPRM published in 
the Federal Register on November 4, 2022 (87 FR 66615). The NPRM was 
prompted by the FAA's analysis of the fuel system reviews on Model 747-
400, -400D, and -400F series airplanes conducted by the manufacturer, 
and by the determination that new or more restrictive airworthiness 
limitations are necessary. In the NPRM, the FAA proposed to require 
revising the existing maintenance or inspection program, as applicable, 
to incorporate new or more restrictive airworthiness limitations.

Discussion of Final Airworthiness Directive

Comments

    The FAA received comments from the Air Line Pilots Association, 
International (ALPA), Boeing, and an individual, who supported the NPRM 
without change.
    The FAA received an additional comment from Delta Air Lines, Inc. 
(Delta). The following presents the comment received on the NPRM and 
the FAA's response to the comment.

Request To Allow Use of Latest Revision of Service Information

    Delta requested that the FAA allow operators the option to 
incorporate Section B, Airworthiness Limitations--Systems, of Section 
9, Airworthiness Limitations (AWLs) and Certification Maintenance 
Requirements (CMRs), of Boeing 747-400 Maintenance Planning Data (MPD) 
Document, D621U400-9, dated April 2022, in lieu of the September 2021 
revision specified in the NPRM. Delta stated that allowing operators 
the option to incorporate this latest MPD will provide an opportunity 
to ensure the most current information is incorporated into their 
maintenance program and avoid the potential for additional alternative 
methods of compliance (AMOCs) in the immediate future when the final 
rule is published.
    The FAA agrees with the request for the reasons stated above. The 
FAA has revised the reference to Section B, Airworthiness Limitations--
Systems, of Section 9, Airworthiness Limitations (AWLs) and 
Certification Maintenance Requirements (CMRs), of Boeing 747-400 
Maintenance Planning Data (MPD) Document, D621U400-9, in paragraph (g) 
of this AD from ``September 2021'' to ``April 2022.'' The FAA reviewed 
this revision and determined it does not require additional work or 
impose any substantive changes to the actions proposed in the NPRM.
    The FAA has also added paragraph (k) of this AD to provide credit 
for operators who have revised the existing maintenance or inspection 
program, as applicable, before the effective date of this AD, to 
incorporate the information specified in Section B, Airworthiness 
Limitations--Systems, of Section 9, Airworthiness Limitations (AWLs) 
and Certification Maintenance Requirements (CMRs), of Boeing 747-400 
Maintenance Planning Data (MPD) Document, D621U400-9, dated September 
2021. This change imposes no additional burden on operators who are 
required to comply with this AD.

Conclusion

    The FAA reviewed the relevant data, considered any comments 
received, and determined that air safety requires adopting this AD as 
proposed. Accordingly, the FAA is issuing this AD to address the unsafe 
condition on these products. Except for minor editorial changes, and 
any other changes described previously, this AD is adopted as proposed 
in the NPRM. None of the changes will increase the economic burden on 
any operator.

Related Service Information Under 1 CFR Part 51

    The FAA reviewed Section 9, Airworthiness Limitations (AWLs) and 
Certification Maintenance Requirements (CMRs), of Boeing 747-400 
Maintenance

[[Page 18017]]

Planning Data (MPD) Document, D621U400-9, dated April 2022. This 
service information specifies airworthiness limitations for fuel tank 
systems. This service information is reasonably available because the 
interested parties have access to it through their normal course of 
business or by the means identified in ADDRESSES.

Costs of Compliance

    The FAA estimates that this AD affects 119 airplanes of U.S. 
registry. The FAA estimates the following costs to comply with this AD:
    The FAA has determined that revising the existing maintenance or 
inspection program takes an average of 90 work-hours per operator, 
although the agency recognizes that this number may vary from operator 
to operator. Since operators incorporate maintenance or inspection 
program changes for their affected fleet(s), the FAA has determined 
that a per-operator estimate is more accurate than a per-airplane 
estimate. Therefore, the FAA estimates the average total cost per 
operator to be $7,650 (90 work-hours x $85 per work-hour).

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. Subtitle VII: Aviation Programs, 
describes in more detail the scope of the Agency's authority.
    The FAA is issuing this rulemaking under the authority described in 
Subtitle VII, Part A, Subpart III, Section 44701: General requirements. 
Under that section, Congress charges the FAA with promoting safe flight 
of civil aircraft in air commerce by prescribing regulations for 
practices, methods, and procedures the Administrator finds necessary 
for safety in air commerce. This regulation is within the scope of that 
authority because it addresses an unsafe condition that is likely to 
exist or develop on products identified in this rulemaking action.

Regulatory Findings

    This AD will not have federalism implications under Executive Order 
13132. This AD will not have a substantial direct effect on the States, 
on the relationship between the national government and the States, or 
on the distribution of power and responsibilities among the various 
levels of government.
    For the reasons discussed above, I certify that this AD:
    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866,
    (2) Will not affect intrastate aviation in Alaska, and
    (3) Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

The Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority:  49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new airworthiness 
directive:

2023-03-20 The Boeing Company: Amendment 39-22345; Docket No. FAA-
2022-1170; Project Identifier AD-2022-00023-T.

(a) Effective Date

    This airworthiness directive (AD) is effective May 1, 2023.

(b) Affected ADs

    This AD affects the ADs specified in paragraphs (b)(1) through 
(7) of this AD.
    (1) AD 2008-10-06 R1, Amendment 39-16160 (75 FR 906, January 7, 
2010) (AD 2008-10-06 R1).
    (2) AD 2008-18-09, Amendment 39-15666 (73 FR 52911, September 
12, 2008) (AD 2008-18-09).
    (3) AD 2010-13-12, Amendment 39-16343 (75 FR 37997, July 1, 
2010) (AD 2010-13-12).
    (4) AD 2010-14-08, Amendment 39-16353 (75 FR 38397, July 2, 
2010) (AD 2010-14-08).
    (5) AD 2011-06-03, Amendment 39-16627 (76 FR 15814, March 22, 
2011) (AD 2011-06-03).
    (6) AD 2014-15-14, Amendment 39-17916 (79 FR 45324, August 5, 
2014) (AD 2014-15-14).
    (7) AD 2016-19-03, Amendment 39-18652 (81 FR 65872, September 
26, 2016) (AD 2016-19-03).

(c) Applicability

    This AD applies to all The Boeing Company Model 747-400, -400D, 
and -400F series airplanes, certificated in any category.

(d) Subject

    Air Transport Association (ATA) of America Code 28, Fuel.

(e) Unsafe Condition

    This AD was prompted by the FAA's analysis of the fuel system 
reviews on Model 747-400, -400D, and -400F series airplanes 
conducted by the manufacturer, and by the determination that new or 
more restrictive airworthiness limitations are necessary. The FAA is 
issuing this AD to reduce the potential of ignition sources inside 
fuel tanks, which, in combination with flammable fuel vapors, could 
result in fuel tank explosions and consequent loss of the airplane.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Maintenance or Inspection Program Revision

    Within 60 days after the effective date of this AD, revise the 
existing maintenance or inspection program, as applicable, to 
incorporate the information specified in Section B, Airworthiness 
Limitations--Systems, of Section 9, Airworthiness Limitations (AWLs) 
and Certification Maintenance Requirements (CMRs), of Boeing 747-400 
Maintenance Planning Data (MPD) Document, D621U400-9, dated April 
2022; except as provided by paragraph (h) of this AD. The initial 
compliance time for doing the airworthiness limitation instruction 
(ALI) tasks is at the times specified in paragraphs (g)(1) through 
(13) of this AD.
    (1) For AWL No. 28-AWL-01, ``External Wires Over Center Fuel 
Tank'': At the applicable time specified in paragraph (g)(1)(i) or 
(ii) of this AD.
    (i) For airplanes that did not have any version of AWL No. 28-
AWL-01 in their maintenance or inspection program before the 
effective date of this AD: Within 144 months since issuance of the 
original airworthiness certificate or original export certificate of 
airworthiness, or within 12 months after the effective date of this 
AD, whichever occurs later.
    (ii) For airplanes not identified in paragraph (g)(1)(i) of this 
AD: Within 144 months since AWL No. 28-AWL-01 was added to the 
maintenance or inspection program, or within 144 months after the 
most recent inspection was performed as specified in AWL No. 28-AWL-
01, whichever occurs later.
    (2) For AWL No. 28-AWL-03, ``Fuel Quantity Indication System 
(FQIS)--Out of Tank Wiring Lightning Shield to Ground Termination'': 
At the applicable time specified in paragraph (g)(2)(i) or (ii) of 
this AD.
    (i) For airplanes that did not have any version of AWL No. 28-
AWL-03 in their maintenance or inspection program before the 
effective date of this AD: Within 144 months since issuance of the 
original airworthiness certificate or original export certificate of 
airworthiness, or within 12 months after the effective date of this 
AD, whichever occurs later.
    (ii) For airplanes not identified in paragraph (g)(2)(i) of this 
AD: Within 144 months since AWL No. 28-AWL-03 was

[[Page 18018]]

added to the maintenance or inspection program, or within 144 months 
after the most recent inspection was performed as specified in AWL 
No. 28-AWL-03, whichever occurs later.
    (3) For AWL No. 28-AWL-10, ``Main Tank, Center Wing Tank, and 
Horizontal Stabilizer Tank (if installed) Refuel Valve 
Installation--Fault Current Bond'': At the applicable time specified 
in paragraph (g)(3)(i) or (ii) of this AD.
    (i) For airplanes that did not have any version of AWL No. 28-
AWL-10 in their maintenance or inspection program before the 
effective date of this AD: Within 144 months since issuance of the 
original airworthiness certificate or original export certificate of 
airworthiness, or within 12 months after the effective date of this 
AD, whichever occurs later.
    (ii) For airplanes not identified in paragraph (g)(3)(i) of this 
AD: Within 144 months since AWL No. 28-AWL-10 was added to the 
maintenance or inspection program, or within 144 months after the 
most recent inspection was performed as specified in AWL No. 28-AWL-
10, whichever occurs later.
    (4) For AWL No. 28-AWL-17, ``Over-Current and Arcing Protection 
Electrical Design Features Operation--Fault Current Detector (FCD) 
for Center Wing Tank (CWT) Pumps and Inboard Main Tank Override/
Jettison (O/J) Pumps and Horizontal Stabilizer Tank (HST) Transfer 
Fuel Pumps'': At the applicable time specified in paragraph 
(g)(4)(i) or (ii) of this AD.
    (i) For airplanes that did not have any version of AWL No. 28-
AWL-17 in their maintenance or inspection program before the 
effective date of this AD: Within 18 months since issuance of the 
original airworthiness certificate or original export certificate of 
airworthiness, or within 90 days after the effective date of this 
AD, whichever occurs later.
    (ii) For airplanes not identified in paragraph (g)(4)(i) of this 
AD: Within 18 months since AWL No. 28-AWL-17 was added to the 
maintenance or inspection program, or within 18 months after the 
most recent inspection was performed as specified in AWL No. 28-AWL-
17, whichever occurs later.
    (5) For AWL No. 28-AWL-24, ``Horizontal Stabilizer Tank (HST) 
Fuel Pump Automatic Shutoff Circuit (If Installed)'': At the 
applicable time specified in paragraph (g)(5)(i) or (ii) of this AD.
    (i) For airplanes that did not have any version of AWL No. 28-
AWL-24 in their maintenance or inspection program before the 
effective date of this AD: Within 12 months since issuance of the 
original airworthiness certificate or original export certificate of 
airworthiness, or within 90 days after the effective date of this 
AD, whichever occurs later.
    (ii) For airplanes not identified in paragraph (g)(5)(i) of this 
AD: Within 12 months since AWL No. 28-AWL-24 was added to the 
maintenance or inspection program, or within 12 months after the 
most recent inspection was performed as specified in AWL No. 28-AWL-
24, whichever occurs later.
    (6) For AWL No. 28-AWL-26, ``Main Tank 2 and Main Tank 3 
Override/Jettison Fuel Pump Uncommanded on System'': At the 
applicable time specified in paragraph (g)(6)(i) or (ii) of this AD.
    (i) For airplanes that did not have any version of AWL No. 28-
AWL-26 in their maintenance or inspection program before the 
effective date of this AD: Within 12 months since issuance of the 
original airworthiness certificate or original export certificate of 
airworthiness, or within 90 days after the effective date of this 
AD, whichever occurs later.
    (ii) For airplanes not identified in paragraph (g)(6)(i) of this 
AD: Within 12 months since AWL No. 28-AWL-26 was added to the 
maintenance or inspection program, or within 12 months after the 
most recent inspection was performed as specified in AWL No. 28-AWL-
26, whichever occurs later.
    (7) For AWL No. 28-AWL-28, ``Over-Current and Arcing Protection 
Electrical Design Features Operation--Main Tank AC Fuel Pump Ground 
Fault Interrupter (GFI)'': At the applicable time specified in 
paragraph (g)(7)(i) or (ii) of this AD.
    (i) For airplanes that did not have any version of AWL No. 28-
AWL-28 in their maintenance or inspection program before the 
effective date of this AD: Within 12 months since issuance of the 
original airworthiness certificate or original export certificate of 
airworthiness, or within 90 days after the effective date of this 
AD, whichever occurs later.
    (ii) For airplanes not identified in paragraph (g)(7)(i) of this 
AD: Within 12 months since AWL No. 28-AWL-28 was added to the 
maintenance or inspection program, or within 12 months after the 
most recent inspection was performed as specified in AWL No. 28-AWL-
28, whichever occurs later.
    (8) For AWL No. 28-AWL-29, ``Over-Current and Arcing Protection 
Electrical Design Features Operation--Center Tank Scavenge AC Fuel 
Pump Ground Fault Interrupter (GFI)'': At the applicable time 
specified in paragraph (g)(8)(i) or (ii) of this AD.
    (i) For airplanes that did not have any version of AWL No. 28-
AWL-29 in their maintenance or inspection program before the 
effective date of this AD: Within 12 months since issuance of the 
original airworthiness certificate or original export certificate of 
airworthiness, or within 90 days after the effective date of this 
AD, whichever occurs later.
    (ii) For airplanes not identified in paragraph (g)(8)(i) of this 
AD: Within 12 months since AWL No. 28-AWL-29 was added to the 
maintenance or inspection program, or within 12 months after the 
most recent inspection was performed as specified in AWL No. 28-AWL-
29, whichever occurs later.
    (9) For AWL No. 28-AWL-33, ``Cushion Clamps and Teflon Sleeving 
Installed on Out-of-Tank Wire Bundles Installed on Brackets that are 
Mounted Directly on the Fuel Tanks,'' at the applicable time 
specified in paragraph (g)(9)(i) or (ii) of this AD.
    (i) For airplanes that did not have any version of AWL No. 28-
AWL-33 in their maintenance or inspection program before the 
effective date of this AD: Within 144 months since issuance of the 
original airworthiness certificate or original export certificate of 
airworthiness, or within 12 months after the effective date of this 
AD, whichever occurs later.
    (ii) For airplanes not identified in paragraph (g)(9)(i) of this 
AD: Within 144 months since AWL No. 28-AWL-33 was added to the 
maintenance or inspection program, or within 144 months after the 
most recent inspection was performed as specified in AWL No. 28-AWL-
33, whichever occurs later.
    (10) For AWL No. 28-AWL-40, ``Reserve Tank Refuel Valve 
Installation--Lightning Protection Electrical Bond,'' at the 
applicable time specified in paragraph (g)(10)(i) or (ii) of this 
AD.
    (i) For airplanes that did not have any version of AWL No. 28-
AWL-40 in their maintenance or inspection program before the 
effective date of this AD: Within 72 months since issuance of the 
original airworthiness certificate or original export certificate of 
airworthiness, or within 12 months after the effective date of this 
AD, whichever occurs later.
    (ii) For airplanes not identified in paragraph (g)(10)(i) of 
this AD: Within 72 months since AWL No. 28-AWL-40 was added to the 
maintenance or inspection program, or within 72 months after the 
most recent inspection was performed as specified in AWL No. 28-AWL-
40, whichever occurs later.
    (11) For AWL No. 47-AWL-07, ``Nitrogen Generation System--
Nitrogen Enriched Air (NEA) Distribution Ducting Inspection,'' at 
the applicable time specified in paragraph (g)(11)(i) or (ii) of 
this AD.
    (i) For airplanes that did not have any version of AWL No. 47-
AWL-07 in their maintenance or inspection program before the 
effective date of this AD: Within 21,250 total flight hours since 
issuance of the original airworthiness certificate or original 
export certificate of airworthiness, or within 4 months after the 
effective date of this AD, whichever occurs later.
    (ii) For airplanes not identified in paragraph (g)(11)(i) of 
this AD: Within 21,250 total flight hours since AWL No. 47-AWL-07 
was added to the maintenance or inspection program, or within 21,250 
total flight hours after the most recent inspection was performed as 
specified in AWL No. 47-AWL-07, whichever occurs later.
    (12) For AWL No. 47-AWL-08, ``Nitrogen Generation System [NGS]--
Cross-Vent Check Valve Functional Check,'' at the applicable time 
specified in paragraph (g)(12)(i) or (ii) of this AD.
    (i) For airplanes that did not have any version of AWL No. 47-
AWL-08 in their maintenance or inspection program before the 
effective date of this AD: Within 21,250 total flight hours since 
issuance of the original airworthiness certificate or original 
export certificate of airworthiness, or within 4 months after the 
effective date of this AD, whichever occurs later.
    (ii) For airplanes not identified in paragraph (g)(12)(i) of 
this AD: Within 21,250 total flight hours since AWL No. 47-AWL-

[[Page 18019]]

08 was added to the maintenance or inspection program, or within 
21,250 total flight hours after the most recent inspection was 
performed as specified in AWL No. 47-AWL-08, whichever occurs later.
    (13) For AWL No. 47-AWL-10, ``NGS--Thermal Switch,'' at the 
applicable time specified in paragraph (g)(13)(i) or (ii) of this 
AD.
    (i) For airplanes that did not have any version of AWL No. 47-
AWL-10 in their maintenance or inspection program before the 
effective date of this AD: Within 54,000 total flight hours since 
issuance of the original airworthiness certificate or original 
export certificate of airworthiness, or within 4 months after the 
effective date of this AD, whichever occurs later.
    (ii) For airplanes not identified in paragraph (g)(13)(i) of 
this AD: Within 54,000 total flight hours since AWL No. 47-AWL-10 
was added to the maintenance or inspection program, or within 54,000 
total flight hours after the most recent inspection was performed as 
specified in AWL No. 47-AWL-10, whichever occurs later.

(h) Additional Acceptable Wire Types and Sleeving

    As an option, during accomplishment of the actions required by 
paragraph (g) of this AD, the alternative materials specified in 
paragraphs (h)(1) and (2) of this AD are acceptable.
    (1) Where AWL No. 28-AWL-08 identifies wire types BMS 13-48, BMS 
13-58, and BMS 13-60, the following wire types, as applicable, are 
acceptable: MIL-W-22759/16, SAE AS22759/16 (M22759/16), MIL-W-22759/
32, SAE AS22759/32 (M22759/32), MIL-W-22759/34, SAE AS22759/34 
(M22759/34), MIL-W-22759/41, SAE AS22759/41 (M22759/41), MIL-W-
22759/86, SAE AS22759/86 (M22759/86), MIL-W-22759/87, SAE AS22759/87 
(M22759/87), MIL-W-22759/92, and SAE AS22759/92 (M22759/92); and 
MIL-C-27500 and NEMA WC 27500 cables constructed from these military 
or SAE specification wire types.
    (2) Where AWL No. 28-AWL-08 identifies TFE-2X Standard wall for 
wire sleeving, the following sleeving materials are acceptable: 
Roundit 2000NX and Varglas Type HO, HP, or HM, as applicable.

(i) No Alternative Actions, Intervals, or Critical Design Configuration 
Control Limitations (CDCCLs)

    After the existing maintenance or inspection program has been 
revised as required by paragraph (g) of this AD, no alternative 
actions (e.g., inspections), intervals, or CDCCLs may be used unless 
the actions, intervals, and CDCCLs are approved as an alternative 
method of compliance (AMOC) in accordance with the procedures 
specified in paragraph (l) of this AD.

(j) Terminating Actions

    (1) Accomplishing the actions required by paragraph (g) of this 
AD terminates all requirements of AD 2008-10-06 R1.
    (2) Accomplishing the actions required by paragraph (g) of this 
AD terminates paragraph (g)(2) of AD 2008-18-09 for Model 747-400, -
400D, and -400F airplanes only.
    (3) Accomplishing the actions required by paragraph (g) of this 
AD terminates paragraph (h)(1) of AD 2010-13-12 for Model 747-400, -
400D, and -400F airplanes only.
    (4) Accomplishing the actions required by this AD terminates 
paragraph (j) of AD 2010-14-08.
    (5) Accomplishing the actions required by paragraph (g) of this 
AD terminates paragraph (l) of AD 2011-06-03 for Model 747-400, -
400D, and -400F airplanes only.
    (6) Accomplishing the actions required by paragraph (g) of this 
AD terminates paragraph (h)(1) of AD 2014-15-14 for Model 747-400, -
400D, and -400F airplanes only.
    (7) Accomplishing the actions required by paragraph (g) of this 
AD terminates paragraph (h) of AD 2016-19-03 for Model 747-400, -
400D, and -400F airplanes only.

(k) Credit for Previous Actions

    This paragraph provides credit for the actions specified in 
paragraph (g) of this AD, if those actions were performed before the 
effective date of this AD using Section B, Airworthiness 
Limitations--Systems, of Section 9, AWLs and CMRs, of Boeing 747-400 
MPD Document, D621U400-9, dated September 2021.

(l) Alternative Methods of Compliance (AMOCs)

    (1) The Manager, Seattle ACO Branch, FAA, has the authority to 
approve AMOCs for this AD, if requested using the procedures found 
in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request 
to your principal inspector or responsible Flight Standards Office, 
as appropriate. If sending information directly to the manager of 
the certification office, send it to the attention of the person 
identified in paragraph (m) of this AD. Information may be emailed 
to: [email protected].
    (2) Before using any approved AMOC, notify your appropriate 
principal inspector, or lacking a principal inspector, the manager 
of the responsible Flight Standards Office.
    (3) An AMOC that provides an acceptable level of safety may be 
used for any repair, modification, or alteration required by this AD 
if it is approved by The Boeing Company Organization Designation 
Authorization (ODA) that has been authorized by the Manager, Seattle 
ACO Branch, FAA, to make those findings. To be approved, the repair 
method, modification deviation, or alteration deviation must meet 
the certification basis of the airplane, and the approval must 
specifically refer to this AD.

(m) Related Information

    For more information about this AD, contact Samuel Dorsey, 
Aerospace Engineer, Propulsion Section, FAA, Seattle ACO Branch, 
2200 South 216th St., Des Moines, WA 98198; phone: (206) 231-3415; 
email: [email protected].

(n) Material Incorporated by Reference

    (1) The Director of the Federal Register approved the 
incorporation by reference (IBR) of the service information listed 
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
    (2) You must use this service information as applicable to do 
the actions required by this AD, unless the AD specifies otherwise.
    (i) Section 9, Airworthiness Limitations (AWLs) and 
Certification Maintenance Requirements (CMRs), of Boeing 747-400 
Maintenance Planning Data (MPD) Document, D621U400-9, dated April 
2022.
    (ii) [Reserved]
    (3) For Boeing service information identified in this AD, 
contact Boeing Commercial Airplanes, Attention: Contractual & Data 
Services (C&DS), 2600 Westminster Blvd., MC 110-SK57, Seal Beach, CA 
90740-5600; phone: (562) 797-1717; website: myboeingfleet.com.
    (4) You may view this service information at FAA, Airworthiness 
Products Section, Operational Safety Branch, 2200 South 216th St., 
Des Moines, WA. For information on the availability of this material 
at the FAA, call (206) 231-3195.
    (5) You may view this service information that is incorporated 
by reference at the National Archives and Records Administration 
(NARA). For information on the availability of this material at 
NARA, email: [email protected], or go to: www.archives.gov/federal-register/cfr/ibr-locations.html.

    Issued on February 10, 2023.
Christina Underwood,
Acting Director, Compliance & Airworthiness Division, Aircraft 
Certification Service.
[FR Doc. 2023-06044 Filed 3-24-23; 8:45 am]
BILLING CODE 4910-13-P


