[Federal Register Volume 86, Number 111 (Friday, June 11, 2021)]
[Rules and Regulations]
[Pages 31087-31089]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2021-12227]



 ========================================================================
 Rules and Regulations
                                                 Federal Register
 ________________________________________________________________________
 
 This section of the FEDERAL REGISTER contains regulatory documents 
 having general applicability and legal effect, most of which are keyed 
 to and codified in the Code of Federal Regulations, which is published 
 under 50 titles pursuant to 44 U.S.C. 1510.
 
 The Code of Federal Regulations is sold by the Superintendent of Documents. 
 
 ========================================================================
 

  Federal Register / Vol. 86, No. 111 / Friday, June 11, 2021 / Rules 
and Regulations  

[[Page 31087]]



DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2021-0199; Project Identifier MCAI-2021-00016-
R;Amendment 39-21579; AD 2021-11-17]
RIN 2120-AA64


Airworthiness Directives; Airbus Helicopters Deutschland GmbH 
(AHD) Helicopters

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: The FAA is adopting a new airworthiness directive (AD) for 
Airbus Helicopters Deutschland GmbH (AHD) Model EC135P1, EC135P2, 
EC135P2+, EC135P3, EC135T1, EC135T2, EC135T2+, and EC135T3 helicopters. 
This AD was prompted by a report of increased control force in the 
collective axis. This AD requires a one-time visual inspection of the 
main rotor actuator (MRA), as specified in a European Aviation Safety 
Agency (now European Union Aviation Safety Agency) (EASA) AD, which is 
incorporated by reference. The FAA is issuing this AD to address the 
unsafe condition on these products.

DATES: This AD is effective July 16, 2021.
    The Director of the Federal Register approved the incorporation by 
reference of a certain publication listed in this AD as of July 16, 
2021.

ADDRESSES: For material incorporated by reference (IBR) in this AD, 
contact the EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; 
telephone +49 221 8999 000; email ADs@easa.europa.eu; internet 
www.easa.europa.eu. You may find this material on the EASA website at 
https://ad.easa.europa.eu. You may view this material at the FAA, 
Office of the Regional Counsel, Southwest Region, 10101 Hillwood Pkwy., 
Room 6N-321, Fort Worth, TX 76177. For information on the availability 
of this material at the FAA, call (817) 222-5110. It is also available 
in the AD docket on the internet at https://www.regulations.gov by 
searching for and locating Docket No. FAA-2021-0199.

Examining the AD Docket

    You may examine the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2021-
0199; or in person at Docket Operations between 9 a.m. and 5 p.m., 
Monday through Friday, except Federal holidays. The AD docket contains 
this final rule, any comments received, and other information. The 
address for Docket Operations is U.S. Department of Transportation, 
Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 
New Jersey Avenue SE, Washington, DC 20590.

FOR FURTHER INFORMATION CONTACT: Katherine Venegas, Aviation Safety 
Engineer, Los Angeles ACO Branch, FAA, 3960 Paramount Blvd., Lakewood, 
California 90712; telephone (562) 627-5353; email 
katherine.venegas@faa.gov.

SUPPLEMENTARY INFORMATION:

Background

    EASA, which is the Technical Agent for the Member States of the 
European Union, has issued EASA AD 2018-0284, dated December 20, 2018 
(EASA AD 2018-0284), to correct an unsafe condition for Airbus 
Helicopters Deutschland GmbH (AHD) Model EC135 P1, EC135 P2, EC135 P2+, 
EC135 P3, EC135 T1, EC135 T2, EC135 T2+, EC135 T3, EC635 P2+, EC635 P3, 
EC635 T1, EC635 T2+, and EC635 T3 helicopters. Model EC635 P2+, EC635 
P3, EC635 T1, and EC635 T3 helicopters are not certificated by the FAA 
and are not included on the U.S. type certificate data sheet; this AD 
therefore does not include those helicopters in the applicability.
    The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 
CFR part 39 by adding an AD that would apply to Model EC135P1, EC135P2, 
EC135P2+, EC135P3, EC135T1, EC135T2, EC135T2+, and EC135T3 helicopters. 
The NPRM published in the Federal Register on March 30, 2021 (86 FR 
16550). The NPRM was prompted by a report of increased control force in 
the collective axis on an AHD Model EC135 helicopter. Subsequent 
inspections determined that a nut on a piston of the MRA had cracked 
and separated from the piston rod. The NPRM proposed to require a one-
time visual inspection of the MRA, as specified in an EASA AD.
    The FAA is issuing this AD to prevent failure of the MRA and 
subsequent loss of control of the helicopter. See EASA AD 2018-0284 for 
additional background information.

Discussion of Final Airworthiness Directive

Comments

    The FAA gave the public the opportunity to participate in 
developing this final rule. The FAA received no comments on the NPRM or 
on the determination of the cost to the public.

Conclusion

    The FAA reviewed the relevant data and determined that air safety 
and the public interest require adopting this final rule as proposed.

Related Service Information Under 1 CFR Part 51

    EASA AD 2018-0284 describes procedures for a one-time visual 
inspection of the MRA and depending on the results, replacing the 
affected parts.
    This material is reasonably available because the interested 
parties have access to it through their normal course of business or by 
the means identified in the ADDRESSES section.

Differences Between This AD and the EASA AD

    The EASA AD requires contacting Airbus Helicopters or replacing an 
affected part, whereas this AD requires performing the corrective 
action in accordance with FAA-approved procedures or removing the 
affected parts from service instead. Where the EASA AD specifies a 
compliance time for the inspection in terms of calendar time or flight 
hours, this AD requires a compliance time in terms of hours time-in-
service instead. Where the EASA AD specifies a compliance time of 15 
days for reporting the inspection results, this AD requires that the 
findings be reported within 30 days.

Interim Action

    The FAA considers this AD interim action. If final action is later 
identified,

[[Page 31088]]

the FAA might consider further rulemaking then.

Costs of Compliance

    The FAA estimates that this AD affects 331 helicopters of U.S. 
Registry. Labor rates are estimated at $85 per work-hour. Based on 
these numbers, the FAA estimates that operators may incur the following 
costs in order to comply with this AD.
    Inspecting the nuts on the MRA pistons takes about 1 work-hour for 
an estimated cost of $85 per helicopter and $28,135 for the U.S. fleet. 
Replacing the MRA takes about 7 work-hours and parts cost $325,081 for 
an estimated cost of $325,676 per helicopter. Repairing the MRA takes 
up to about 8 work-hours and parts cost about $110 for an estimated 
cost of up to $790 per MRA. Reporting information takes about 1 hour 
for an estimated cost of $85 per helicopter and $28,135 for the U.S. 
fleet.

Paperwork Reduction Act

    A federal agency may not conduct or sponsor, and a person is not 
required to respond to, nor shall a person be subject to penalty for 
failure to comply with a collection of information subject to the 
requirements of the Paperwork Reduction Act unless that collection of 
information displays a current valid OMB control number. The control 
number for the collection of information required by this AD is 2120-
0056. The paperwork cost associated with this AD has been detailed in 
the Costs of Compliance section of this document and includes time for 
reviewing instructions, as well as completing and reviewing the 
collection of information. Therefore, all reporting associated with 
this AD is mandatory. Comments concerning the accuracy of this burden 
and suggestions for reducing the burden should be directed to 
Information Collection Clearance Officer, Federal Aviation 
Administration, 10101 Hillwood Pkwy., Fort Worth, TX 76177-1524.

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. Subtitle VII: Aviation Programs, 
describes in more detail the scope of the Agency's authority.
    The FAA is issuing this rulemaking under the authority described in 
Subtitle VII, Part A, Subpart III, Section 44701: General requirements. 
Under that section, Congress charges the FAA with promoting safe flight 
of civil aircraft in air commerce by prescribing regulations for 
practices, methods, and procedures the Administrator finds necessary 
for safety in air commerce. This regulation is within the scope of that 
authority because it addresses an unsafe condition that is likely to 
exist or develop on products identified in this rulemaking action.

Regulatory Findings

    This AD will not have federalism implications under Executive Order 
13132. This AD will not have a substantial direct effect on the States, 
on the relationship between the national government and the States, or 
on the distribution of power and responsibilities among the various 
levels of government.
    For the reasons discussed above, I certify that this AD:
    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866,
    (2) Will not affect intrastate aviation in Alaska, and
    (3) Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

The Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority:  49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new airworthiness 
directive:

2021-11-17 Airbus Helicopters Deutschland GmbH (AHD): Amendment 39-
21579; Docket No. FAA-2021-0199; Project Identifier MCAI-2021-00016-
R.

(a) Effective Date

    This airworthiness directive (AD) is effective July 16, 2021.

(b) Affected Airworthiness Directives (ADs)

    None.

(c) Applicability

    This AD applies to all Airbus Helicopters Deutschland GmbH (AHD) 
Model EC135P1, EC135P2, EC135P2+, EC135P3, EC135T1, EC135T2, 
EC135T2+, and EC135T3 helicopters, certificated in any category.
    Note 1 to paragraph (c): Helicopters with an EC135P3H 
designation are Model EC135P3 helicopters. Helicopters with an 
EC135T3H designation are Model EC135T3 helicopters.

(d) Subject

    Joint Aircraft System Component (JASC) Code: 6710, Main Rotor 
Control.

(e) Reason

    This AD was prompted by a report of increased control force in 
the collective axis. The FAA is issuing this AD to prevent failure 
of the main rotor actuator and subsequent loss of control of the 
helicopter.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Requirements

    Except as specified in paragraph (h) of this AD: Comply with all 
required actions and compliance times specified in, and in 
accordance with, European Aviation Safety Agency (now European Union 
Aviation Safety Agency) (EASA) AD 2018-0284, dated December 20, 2018 
(EASA AD 2018-0284).

(h) Exceptions to EASA AD 2018-0284

    (1) Where EASA AD 2018-0284 refers to its effective date, this 
AD requires using the effective date of this AD.
    (2) Where paragraph (3) of EASA AD 2018-0284 specifies 
contacting Airbus Helicopters, this AD requires performing the 
corrective action in accordance with FAA-approved procedures.
    (3) Where paragraph (4) of EASA AD 2018-0284 specifies an 
alternative method to comply with the requirements of paragraph (3) 
of EASA AD 2018-0284 by replacing an affected part, this AD requires 
removing the affected part from service as an alternative method.
    (4) Where paragraph (1) of EASA AD 2018-0284 specifies a 
compliance time of ``3 months or 50 flight hours, whichever occurs 
first,'' this AD requires a compliance time of within 50 hours time-
in-service (TIS) from the effective date of this AD.
    (5) Where paragraph (2) of EASA AD 2018-0284 specifies a 
compliance time of ``15 days,'' this AD requires using a compliance 
time of ``30 days.''
    (6) The ``Remarks'' section of EASA AD 2018-0284 does not apply 
to this AD.

(i) Alternative Methods of Compliance (AMOCs)

    (1) The Manager, International Validation Branch, FAA, has the 
authority to approve AMOCs for this AD, if requested using the 
procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, 
send your request to your principal inspector or local Flight 
Standards District Office, as appropriate. If sending information 
directly to the manager of the International Validation Branch, send 
it to the attention of the person identified in paragraph (j) of 
this AD. Information may be emailed to: 9-AVS-AIR-730-AMOC@faa.gov.
    (2) Before using any approved AMOC, notify your appropriate 
principal inspector,

[[Page 31089]]

or lacking a principal inspector, the manager of the local flight 
standards district office/certificate holding district office.

(j) Related Information

    For more information about this AD, contact Katherine Venegas, 
Aviation Safety Engineer, Los Angeles ACO Branch, FAA, 3960 
Paramount Blvd., Lakewood, California 90712; telephone (562) 627-
5353; email katherine.venegas@faa.gov.

(k) Material Incorporated by Reference

    (1) The Director of the Federal Register approved the 
incorporation by reference (IBR) of the service information listed 
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
    (2) You must use this service information as applicable to do 
the actions required by this AD, unless this AD specifies otherwise.
    (i) European Aviation Safety Agency (EASA) AD 2018-0284, dated 
December 20, 2018.
    (ii) [Reserved]
    (3) For EASA AD 2018-0284, contact the EASA, Konrad-Adenauer-
Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; email 
ADs@easa.europa.eu; Internet www.easa.europa.eu. You may find this 
EASA AD on the EASA website at https://ad.easa.europa.eu.
    (4) You may view this service information at the FAA, Office of 
the Regional Counsel, Southwest Region, 10101 Hillwood Pkwy., Room 
6N-321, Fort Worth, TX 76177. For information on the availability of 
this material at the FAA, call (817) 222-5110. This material may be 
found in the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-
2021-0199.
    (5) You may view this material that is incorporated by reference 
at the National Archives and Records Administration (NARA). For 
information on the availability of this material at NARA, email 
fedreg.legal@nara.gov, or go to https://www.archives.gov/federal-register/cfr/ibr-locations.html.

    Issued on May 20, 2021.
Gaetano A. Sciortino,
Deputy Director for Strategic Initiatives, Compliance & Airworthiness 
Division, Aircraft Certification Service.
[FR Doc. 2021-12227 Filed 6-10-21; 8:45 am]
BILLING CODE 4910-13-P


