[Federal Register Volume 84, Number 90 (Thursday, May 9, 2019)]
[Rules and Regulations]
[Pages 20246-20248]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-09524]



[[Page 20246]]

-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2018-1070; Product Identifier 2018-NM-154-AD; Amendment 
39-19633; AD 2019-08-12]
RIN 2120-AA64


Airworthiness Directives; Viking Air Limited (Type Certificate 
Previously Held by Bombardier, Inc.; Canadair Limited) Airplanes

AGENCY: Federal Aviation Administration (FAA), Department of 
Transportation (DOT).

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: We are adopting a new airworthiness directive (AD) for certain 
Viking Air Limited Model CL-215-6B11 (CL-215T Variant) and CL-215-6B11 
(CL-415 Variant) airplanes. This AD was prompted by a report that a 
supplier fabricated Teflon parts with a charge of 15 percent fiberglass 
content instead of the specified 5 percent fiberglass content. This AD 
requires repetitive detailed visual inspections of the aileron control 
system cables and flap interconnect system cables for damage or 
disconnected cables, corrective actions if necessary, and replacement 
of the Teflon parts in the aileron control systems, aileron/rudder 
interconnect, and aileron power unit beam. The replacement of these 
parts terminates the repetitive inspections. We are issuing this AD to 
address the unsafe condition on these products.

DATES: This AD is effective June 13, 2019.
    The Director of the Federal Register approved the incorporation by 
reference of certain publications listed in this AD as of June 13, 
2019.

ADDRESSES: For service information identified in this final rule, 
contact Viking Air Limited, 1959 de Havilland Way, Sidney, British 
Columbia V8L 5V5, Canada; telephone +1-250-656-7227; fax +1-250-656-
0673; email acs-technical.publications@vikingair.com; internet http://www.vikingair.com. You may view this service information at the FAA, 
Transport Standards Branch, 2200 South 216th St., Des Moines, WA. For 
information on the availability of this material at the FAA, call 206-
231-3195. It is also available on the internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2018-
1070.

Examining the AD Docket

    You may examine the AD docket on the internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2018-
1070; or in person at Docket Operations between 9 a.m. and 5 p.m., 
Monday through Friday, except Federal holidays. The AD docket contains 
this final rule, the regulatory evaluation, any comments received, and 
other information. The address for Docket Operations (phone: 800-647-
5527) is U.S. Department of Transportation, Docket Operations, M-30, 
West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, 
Washington, DC 20590.

FOR FURTHER INFORMATION CONTACT: Darren Gassetto, Aerospace Engineer, 
Mechanical Systems and Admin Services Section, FAA, New York ACO 
Branch, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 
516-228-7323; fax 516-794-5531; email 9-avs-nyaco-cos@faa.gov.

SUPPLEMENTARY INFORMATION: 

Discussion

    We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR 
part 39 by adding an AD that would apply to certain Viking Air Limited 
Model CL-215-6B11 (CL-215T Variant) and CL-215-6B11 (CL-415 Variant) 
airplanes. The NPRM published in the Federal Register on February 8, 
2019 (84 FR 2791). The NPRM was prompted by a report that a supplier 
fabricated Teflon parts with a charge of 15 percent fiberglass content 
instead of the specified 5 percent fiberglass content. The NPRM 
proposed to require repetitive detailed visual inspections of the 
aileron control system cables and flap interconnect system cables for 
damage or disconnected cables, corrective actions if necessary, and 
replacement of the Teflon parts in the aileron control systems, 
aileron/rudder interconnect, and aileron power unit beam. The NPRM 
proposed that the replacement of these parts would terminate the 
repetitive inspections.
    We are issuing this AD to address parts manufactured with this 
higher percentage of fiberglass, which may cause deterioration of 
control cables and adjacent parts due to greater friction should they 
come into contact, which could lead to reduced controllability of the 
airplane.
    Transport Canada Civil Aviation (TCCA), which is the aviation 
authority for Canada, has issued Canadian AD CF-2018-27, dated October 
12, 2018 (referred to after this as the Mandatory Continuing 
Airworthiness Information, or ``the MCAI''), to correct an unsafe 
condition for certain Viking Air Limited Model CL-215-6B11 (CL-215T 
Variant) and CL-215-6B11 (CL-415 Variant) airplanes. The MCAI states:

    It was found that a supplier fabricated TeflonTM 
parts with a charge of 15% fiberglass content in lieu of the 
required 5%. Parts manufactured with this higher percentage of 
fiberglass may cause wear and rupture of control cables due to 
greater friction if contacted [which could lead to reduced 
controllability of the airplane].
    This [Canadian] AD mandates a [detailed] visual inspection of 
the aileron control system cables and flap interconnect system 
cables in the area of the aileron power control unit. The inspection 
is required to ensure that there is no cable damage or disconnect 
until the replacement of the TeflonTM parts has been 
completed in the aileron control system, the aileron/rudder 
interconnect and the aileron power unit beam. This [Canadian] AD 
also requires replacement of the TeflonTM parts.

    Signs of damage include broken wires, unusual wear, or fraying 
cables. You may examine the MCAI in the AD docket on the internet at 
http://www.regulations.gov by searching for and locating Docket No. 
FAA-2018-1070.

Comments

    We gave the public the opportunity to participate in developing 
this final rule. We received no comments on the NPRM or on the 
determination of the cost to the public.

Conclusion

    We reviewed the relevant data and determined that air safety and 
the public interest require adopting this final rule as proposed, 
except for minor editorial changes. We have determined that these minor 
changes:
     Are consistent with the intent that was proposed in the 
NPRM for addressing the unsafe condition; and
     Do not add any additional burden upon the public than was 
already proposed in the NPRM.

Related Service Information Under 1 CFR Part 51

    Bombardier has issued Service Bulletin 215-3185, Revision 1, dated 
January 28, 2014; and Service Bulletin 215-4476, Revision 1, dated 
January 28, 2014. The service information describes procedures for a 
detailed visual inspection in the area of the aileron power control 
unit for damaged or disconnected aileron control system cables or flap 
interconnect system cables, and corrective actions. These documents are 
distinct since they apply to different airplane models in different 
configurations.
    Bombardier has also issued Service Bulletin 215-3186, Revision 3, 
dated September 29, 2015; and Service

[[Page 20247]]

Bulletin 215-4477, Revision 2, dated September 29, 2015. The service 
information describes procedures for replacement of Teflon parts in the 
aileron control system, the aileron/rudder interconnect, and the 
aileron power unit beam. These documents are distinct since they apply 
to different airplane models in different configurations.
    This service information is reasonably available because the 
interested parties have access to it through their normal course of 
business or by the means identified in the ADDRESSES section.

Costs of Compliance

    We estimate that this AD affects 1 airplane of U.S. registry. We 
estimate the following costs to comply with this AD:

                                      Estimated Costs for Required Actions
----------------------------------------------------------------------------------------------------------------
                                                                                    Cost per       Cost on U.S.
                          Labor cost                              Parts cost        product         operators
----------------------------------------------------------------------------------------------------------------
66 work-hours x $85 per hour = $5,610........................         $16,456          $22,066          $22,066
----------------------------------------------------------------------------------------------------------------

    We have received no definitive data that would enable us to provide 
cost estimates for the on-condition actions specified in this AD.

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. Subtitle VII: Aviation Programs, 
describes in more detail the scope of the Agency's authority.
    We are issuing this rulemaking under the authority described in 
Subtitle VII, Part A, Subpart III, Section 44701: ``General 
requirements.'' Under that section, Congress charges the FAA with 
promoting safe flight of civil aircraft in air commerce by prescribing 
regulations for practices, methods, and procedures the Administrator 
finds necessary for safety in air commerce. This regulation is within 
the scope of that authority because it addresses an unsafe condition 
that is likely to exist or develop on products identified in this 
rulemaking action.
    This AD is issued in accordance with authority delegated by the 
Executive Director, Aircraft Certification Service, as authorized by 
FAA Order 8000.51C. In accordance with that order, issuance of ADs is 
normally a function of the Compliance and Airworthiness Division, but 
during this transition period, the Executive Director has delegated the 
authority to issue ADs applicable to transport category airplanes and 
associated appliances to the Director of the System Oversight Division.

Regulatory Findings

    This AD will not have federalism implications under Executive Order 
13132. This AD will not have a substantial direct effect on the States, 
on the relationship between the national government and the States, or 
on the distribution of power and responsibilities among the various 
levels of government.
    For the reasons discussed above, I certify that this AD:
    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866,
    (2) Is not a ``significant rule'' under the DOT Regulatory Policies 
and Procedures (44 FR 11034, February 26, 1979),
    (3) Will not affect intrastate aviation in Alaska, and
    (4) Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

Adoption of the Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority:  49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13   [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new airworthiness 
directive (AD):


2019-08-12 Viking Air Limited (Type Certificate Previously Held by 
Bombardier, Inc.; Canadair Limited): Amendment 39-19633; Docket No. 
FAA-2018-1070; Product Identifier 2018-NM-154-AD.

(a) Effective Date

    This AD is effective June 13, 2019.

(b) Affected ADs

    None.

(c) Applicability

    This AD applies to Viking Air Limited (Type Certificate 
previously held by Bombardier, Inc.; Canadair Limited) airplanes, 
certificated in any category, as identified in paragraphs (c)(1) and 
(c)(2) of this AD.
    (1) Model CL-215-6B11 (CL-215T Variant) airplanes, serial 
numbers 1085, 1086, 1093, 1094, and 1098 through 1101 inclusive.
    (2) Model CL-215-6B11 (CL-415 Variant) airplanes, serial numbers 
2076 through 2090 inclusive.

(d) Subject

    Air Transport Association (ATA) of America Code 27, Flight 
controls.

(e) Reason

    This AD was prompted by a report that a supplier fabricated 
Teflon parts with a charge of 15 percent fiberglass content instead 
of the specified 5 percent fiberglass content. We are issuing this 
AD to address parts manufactured with this higher percentage of 
fiberglass, which may cause deterioration of control cables and 
adjacent parts due to greater friction should they come into 
contact, which could lead to reduced controllability of the 
airplane.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Inspection

    Within 50 flight hours after the effective date of this AD: 
Accomplish a detailed visual inspection of the aileron control 
systems cables and flap interconnect system cables for disconnected 
or damaged cables in accordance with paragraph 2.A. of the 
Accomplishment Instructions of Bombardier Service Bulletin 215-3185, 
Revision 1, dated January 28, 2014; or Bombardier Service Bulletin 
215-4476, Revision 1, dated January 28, 2014; as applicable. Repeat 
the inspection thereafter at intervals not to exceed 50 flight 
hours.

(h) Corrective Action

    If any disconnected or damaged (including broken wires, unusual 
wear, or fraying) cables are found during any inspection required by 
paragraph (g) of this AD: Before further flight, obtain corrective 
actions approved by the Manager, New York ACO

[[Page 20248]]

Branch, FAA; or Transport Canada Civil Aviation (TCCA); or Viking 
Air Limited's TCCA Design Approval Organization (DAO). If approved 
by the DAO, the approval must include the DAO-authorized signature. 
Accomplish the corrective actions within the compliance time 
specified therein. If no compliance time is specified in the 
corrective actions instructions, accomplish the corrective action 
before further flight.

(i) Replacement

    Within 29 months after the effective date of this AD: Replace 
the Teflon parts in the aileron control system, the aileron/rudder 
interconnect, and the aileron power unit beam in accordance with 
Parts A, B, and C of the Accomplishment Instructions of Bombardier 
Service Bulletin 215-3186, Revision 3, dated September 29, 2015; or 
Bombardier Service Bulletin 215-4477, Revision 2, dated September 
29, 2015.

(j) Terminating Action for Inspections

    Accomplishing the replacement required by paragraph (i) of this 
AD on an airplane constitutes terminating action for the inspections 
required by paragraph (g) of this AD for that airplane.

(k) Credit for Previous Actions

    This paragraph provides credit for actions required by paragraph 
(i) of this AD, if those actions were performed before the effective 
date of this AD using the service information specified in 
paragraphs (k)(1) through (k)(5) of this AD.
    (1) Bombardier Service Bulletin 215-3186, dated September 30, 
2013.
    (2) Bombardier Service Bulletin 215-3186, Revision 1, dated 
November 26, 2014.
    (3) Bombardier Service Bulletin 215-3186, Revision 2, dated 
December 5, 2014.
    (4) Bombardier Service Bulletin 215-4477, dated September 30, 
2013.
    (5) Bombardier Service Bulletin 215-4477, Revision 1, dated 
November 26, 2014.

(l) No Reporting Requirement

    Although Bombardier Service Bulletin 215-3185, Revision 1, dated 
January 28, 2014; Bombardier Service Bulletin 215-3186, Revision 3, 
dated September 29, 2015; Bombardier Service Bulletin 215-4476, 
Revision 1, dated January 28, 2014; and Bombardier Service Bulletin 
215-4477, Revision 2, dated September 29, 2015; specify to submit 
certain information to the manufacturer, this AD does not include 
that requirement.

(m) Other FAA AD Provisions

    The following provisions also apply to this AD:
    (1) Alternative Methods of Compliance (AMOCs): The Manager, New 
York ACO Branch, FAA, has the authority to approve AMOCs for this 
AD, if requested using the procedures found in 14 CFR 39.19. In 
accordance with 14 CFR 39.19, send your request to your principal 
inspector or local Flight Standards District Office, as appropriate. 
If sending information directly to the manager of the certification 
office, send it to ATTN: Program Manager, Continuing Operational 
Safety, FAA, New York ACO Branch, 1600 Stewart Avenue, Suite 410, 
Westbury, NY 11590; telephone 516-228-7300; fax 516-794-5531. Before 
using any approved AMOC, notify your appropriate principal 
inspector, or lacking a principal inspector, the manager of the 
local flight standards district office/certificate holding district 
office.
    (2) Contacting the Manufacturer: For any requirement in this AD 
to obtain corrective actions from a manufacturer, the action must be 
accomplished using a method approved by the Manager, New York ACO 
Branch, FAA; or TCCA; or Viking Air Limited's TCCA DAO. If approved 
by the DAO, the approval must include the DAO-authorized signature.

(n) Related Information

    (1) Refer to Mandatory Continuing Airworthiness Information 
(MCAI) Canadian AD CF-2018-27, dated October 12, 2018, for related 
information. This MCAI may be found in the AD docket on the internet 
at http://www.regulations.gov by searching for and locating Docket 
No. FAA-2018-1070.
    (2) For more information about this AD, contact Darren Gassetto, 
Aerospace Engineer, Mechanical Systems and Admin Services Section, 
FAA, New York ACO Branch, 1600 Stewart Avenue, Suite 410, Westbury, 
NY 11590; telephone 516-228-7323; fax 516-794-5531; email 9-avs-nyaco-cos@faa.gov.
    (3) Service information identified in this AD that is not 
incorporated by reference is available at the addresses specified in 
paragraphs (o)(3) and (o)(4) of this AD.

(o) Material Incorporated by Reference

    (1) The Director of the Federal Register approved the 
incorporation by reference (IBR) of the service information listed 
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
    (2) You must use this service information as applicable to do 
the actions required by this AD, unless this AD specifies otherwise.
    (i) Bombardier Service Bulletin 215-3185, Revision 1, dated 
January 28, 2014.
    (ii) Bombardier Service Bulletin 215-3186, Revision 3, dated 
September 29, 2015.
    (iii) Bombardier Service Bulletin 215-4476, Revision 1, dated 
January 28, 2014.
    (iv) Bombardier Service Bulletin 215-4477, Revision 2, dated 
September 29, 2015.
    (3) For service information identified in this AD, contact 
Viking Air Limited, 1959 de Havilland Way, Sidney, British Columbia 
V8L 5V5, Canada; telephone +1-250-656-7227; fax +1-250-656-0673; 
email acs-technical.publications@vikingair.com; internet http://www.vikingair.com.
    (4) You may view this service information at the FAA, Transport 
Standards Branch, 2200 South 216th St., Des Moines, WA. For 
information on the availability of this material at the FAA, call 
206-231-3195.
    (5) You may view this service information that is incorporated 
by reference at the National Archives and Records Administration 
(NARA). For information on the availability of this material at 
NARA, call 202-741-6030, or go to: http://www.archives.gov/federal-register/cfr/ibr-locations.html.

    Issued in Des Moines, Washington, on April 25, 2019.
Michael Kaszycki,
Acting Director, System Oversight Division, Aircraft Certification 
Service.
[FR Doc. 2019-09524 Filed 5-8-19; 8:45 am]
 BILLING CODE 4910-13-P


