
[Federal Register Volume 79, Number 120 (Monday, June 23, 2014)]
[Rules and Regulations]
[Pages 35485-35488]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-14336]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2013-1056; Directorate Identifier 2013-CE-046-AD; 
Amendment 39-17849; AD 2014-10-02]
RIN 2120-AA64


Airworthiness Directives; Dornier Luftfahrt GmbH Airplanes

AGENCY: Federal Aviation Administration (FAA), Department of 
Transportation (DOT).

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: We are superseding airworthiness directive (AD) 2006-11-19 for 
Dornier Luftfahrt GmbH Model Dornier 228-100, 228-101, 228-200, 228-
201, 228-202, and 228-212 airplanes. This AD results from mandatory 
continuing airworthiness information (MCAI) issued by an aviation 
authority of another country to identify and correct an unsafe 
condition on an aviation product. The MCAI describes the unsafe 
condition as chafed or damaged wiring on the flight deck overhead 
panels (5VE and 6VE). We are issuing this AD to require actions to 
address the unsafe condition on these products.

DATES: This AD is effective July 28, 2014.
    The Director of the Federal Register approved the incorporation by 
reference of certain publications listed in the AD as of July 28, 2014.

ADDRESSES: You may examine the AD docket on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2013-
1056; or in person at the Docket Management Facility, U.S. Department 
of Transportation, Docket Operations, M-30, West Building Ground Floor, 
Room W12-140, 1200 New Jersey Avenue SE., Washington, DC 20590.
    For service information identified in this AD, contact RUAG 
Aerospace Services GmbH, Dornier 228 Customer Support, P.O. Box 1253, 
82231 Wessling, Germany; telephone: +49 (0) 8153-30 2220; fax: +49 (0) 
8153-30 4258; email: custsupport.dornier228@ruag.com; Internet: http://www.ruag.com/en/Aviation/Aviation_Home. You may view this referenced 
service information at the FAA, Small Airplane Directorate, 901 Locust, 
Kansas City, Missouri 64106. For information on the availability of 
this material at the FAA, call (816) 329-4148.

[[Page 35486]]


FOR FURTHER INFORMATION CONTACT: Karl Schletzbaum, Aerospace Engineer, 
FAA, Small Airplane Directorate, 901 Locust, Room 301, Kansas City, 
Missouri 64106; telephone: (816) 329-4146; fax: (816) 329-4090; email: 
karl.schletzbaum@faa.gov.

SUPPLEMENTARY INFORMATION: 

Discussion

    We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR 
part 39 to add an AD that would apply to Dornier Luftfahrt GmbH Model 
DORNIER LUFTFAHRT GmbH Models Dornier 228-100, 228-101, 228-200, 228-
201, 228-202, and 228-212 airplanes. The NPRM was published in the 
Federal Register on December 23, 2013 (78 FR 77380), and proposed to 
supersede AD 2006-11-19, Amendment 39-14624 (71 FR 32268; June 5, 
2006).
    Since we issued AD 2006-11-19, Amendment 39-14624 (71 FR 32268; 
June 5, 2006), DORNIER LUFTFAHRT GmbH changed the compliance time 
between repetitive inspections and incorporated those inspections into 
the Time Limits/Maintenance Checks Manual (TLMCM).
    The NPRM proposed to correct an unsafe condition for the specified 
products and was based on mandatory continuing airworthiness 
information (MCAI) originated by an aviation authority of another 
country. The MCAI states that:

    RUAG Aerospace Services GmbH issued Time Limits/Maintenance 
Checks Manual (TLMCM) TM-TLMCM-090305-ALL, Revision 5 dated 20 March 
2011 respectively TM-TLMCM-228-00002-150610, Revision 1 dated 03 
March 2011, listing component life limits and describing maintenance 
instructions for the Dornier 228 type design. The Document TM-TLMCM-
228-00002-150610 is valid for airplane SN 8300 and up and other 
airplane SN modified according to CN-228-247. The instructions 
contained in that manual have been identified as mandatory actions 
for continued airworthiness.
    In 2005, chafed wiring was found on 5VE Panel due to lost 
adhesive of the TY-RAP holder and subsequent vibration of the cable 
harness.
    To address this potential unsafe condition, RUAG issued All 
Operators Telefax (AOT) No. AOT-228-24-028 and Temporary Revision 
(TR) 05-05 of the TLMCM introducing repetitive of the cockpit 
overhead panels 5VE and 6VE and, depending on findings, corrective 
actions(s). Subsequently, LBA issued AD D-2005-438 (EASA approval 
2005-6430) to require those actions.
    Since that AD was issued, the instructions of TR 05-05 have been 
incorporated into TM-TLMCM-090305-ALL, Revision 5 dated 20 March 
2011 respectively into TM-TLMCM-228-00002-150610, Revision 1 dated 
03 March 2011.
    For the reasons described above, this AD retains the 
requirements of EASA AD D-2005-438, which is superseded, and 
requires the implementation of the life limits and maintenance 
actions as specified in the TLMCM (TM-TLMCM-090305-ALL respectively 
TM-TLMCM-228-00002-150610) for zone 321 overhead panels 5VE/6VE.

    The MCAI can be found in the AD docket on the Internet at: http://www.regulations.gov/#!documentDetail;D=FAA-2013-1056-0002.
    After the NPRM was issued, we identified that we inadvertently 
omitted the calendar time compliance for the inspections of the wiring 
in the flight deck overhead panels. We issued a supplemental notice of 
proposed rulemaking (SNPRM) to propose adding the calendar time 
compliance for the inspections of the wiring in the flight deck 
overhead panels. The SNPRM was published in the Federal Register on 
March 4, 2014 (79 FR 12131).

Comments

    We gave the public the opportunity to participate in developing 
this AD. We received no comments on the SNPRM (79 FR 12131, March 4, 
2014) or on the determination of the cost to the public.

Conclusion

    We reviewed the relevant data and determined that air safety and 
the public interest require adopting the AD as proposed except for 
minor editorial changes. We have determined that these minor changes:
     Are consistent with the intent that was proposed in the 
SNPRM (79 FR 12131, March 4, 2014) for correcting the unsafe condition; 
and
     Do not add any additional burden upon the public than was 
already proposed in the SNPRM (79 FR 12131, March 4, 2014).

Costs of Compliance

    We estimate that this AD will affect 17 products of U.S. registry. 
We also estimate that it will take about 2 work-hours per product to 
comply with the basic requirements of this AD. The average labor rate 
is $85 per work-hour.
    Based on these figures, we estimate the cost of the proposed AD on 
U.S. operators to be $2,890 or $170 per product.
    In addition, we estimate that any necessary follow-on actions would 
take about 3 work-hours and require parts costing $1,000, for a cost of 
$1,255 per product. We have no way of determining the number of 
products that may need these actions.

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. ``Subtitle VII: Aviation 
Programs,'' describes in more detail the scope of the Agency's 
authority.
    We are issuing this rulemaking under the authority described in 
``Subtitle VII, Part A, Subpart III, Section 44701: General 
requirements.'' Under that section, Congress charges the FAA with 
promoting safe flight of civil aircraft in air commerce by prescribing 
regulations for practices, methods, and procedures the Administrator 
finds necessary for safety in air commerce. This regulation is within 
the scope of that authority because it addresses an unsafe condition 
that is likely to exist or develop on products identified in this 
rulemaking action.

Regulatory Findings

    We determined that this AD will not have federalism implications 
under Executive Order 13132. This AD will not have a substantial direct 
effect on the States, on the relationship between the national 
government and the States, or on the distribution of power and 
responsibilities among the various levels of government.
    For the reasons discussed above, I certify this AD:
    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866,
    (2) Is not a ``significant rule'' under the DOT Regulatory Policies 
and Procedures (44 FR 11034, February 26, 1979),
    (3) Will not affect intrastate aviation in Alaska, and
    (4) Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

Examining the AD Docket

    You may examine the AD docket on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2013-
1056; or in person at the Docket Management Facility between 9 a.m. and 
5 p.m., Monday through Friday, except Federal holidays. The AD docket 
contains the NPRM/SNPRM, the regulatory evaluation, any comments 
received, and other information. The street address for the Docket 
Office (telephone (800) 647-5527) is in the ADDRESSES section. Comments 
will be available in the AD docket shortly after receipt.

[[Page 35487]]

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

Adoption of the Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority:  49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by removing Amendment 39-14624 (71 FR 
32268; June 5, 2006) and adding the following new AD:

2014-10-02 Dornier Luftfahrt GmbH: Amendment 39-17849; Docket No. 
FAA-2013-1056; Directorate Identifier 2013-CE-046-AD.

(a) Effective Date

    This airworthiness directive (AD) becomes effective July 28, 
2014.

(b) Affected ADs

    This AD supersedes AD 2006-11-19, Amendment 39-14624 (71 FR 
32268; June 5, 2006).

(c) Applicability

    This AD applies to Dornier Luftfahrt GmbH Dornier Models 228-
100, 228-101, 228-200, 228-201, 228-202, and 228-212 airplanes, all 
serial numbers, certificated in any category.

(d) Subject

    Air Transport Association of America (ATA) Code 5: Time Limits.

(e) Reason

    This AD was prompted by mandatory continuing airworthiness 
information (MCAI) originated by an aviation authority of another 
country to identify and correct an unsafe condition on an aviation 
product. The MCAI describes the unsafe condition as chafed or 
damaged wiring on the flight deck overhead panels (5VE and 6VE). We 
are issuing this AD to prevent chafing and damage to the wiring in 
the flight deck overhead panels, which could result in short-
circuiting of related wiring and possibly lead to electrical failure 
of affected systems and potential fire in the flight deck.

(f) Actions and Compliance

    Unless already done, do the following actions in paragraphs 
(f)(1) through (f)(3) of this AD:
    (1) Within the next 600 hours time-in-service (TIS) after July 
28, 2014 (the effective date of this AD) or within the next 12 
months after July 28, 2014 (the effective date of this AD), 
whichever occurs first, and repetitively thereafter at intervals not 
to exceed 600 hours TIS or 12 months, whichever occurs first, 
inspect the wiring in the flight deck overhead panels, 5VE and 6VE, 
for chafing, damage, and/or incorrect installation (wire tie 
attachment holders). For the inspection, refer to:
    (i) Zone 321 on page 5, dated May 1, 2006, in section 05-22-10, 
Zonal Inspection Program, in Chapter 05, Time Limits/Maintenance 
Checks--General, in RUAG Aerospace Services GmbH Dornier 228 Time 
Limits/Maintenance Checks Manual (TLMCM), TM-TLMCM-090305-ALL, 
Revision 5, March 20, 2011;
    (ii) Zone 321 on page 5, dated May 1, 2006, in section 05-26-10, 
Low Utilization Zonal Inspection Program, in Chapter 05, Time 
Limits/Maintenance Checks--General, in RUAG Aerospace Services GmbH 
Dornier 228 Time Limits/Maintenance Checks Manual (TLMCM), TM-TLMCM-
090305-ALL, Revision 5, March 20, 2011;
    (iii) Pages 1 through 10, Overhead Panel 5VE--Description, dated 
November 25, 2009, in subject 31-10-07, of Chapter 31, Indicating/
Recording Systems, in RUAG Aerospace Services GmbH Dornier 228 
Airplane Maintenance Manual, TM-AMM-228-00014-080184, Revision 3, 
October 30, 2012;
    (iv) Pages 201 through 208, Overhead Panel 5VE--Maintenance 
Practices, dated November 25, 2009, in subject 31-10-07, of Chapter 
31, Indicating/Recording Systems, in RUAG Aerospace Services GmbH 
Dornier 228 Airplane Maintenance Manual, TM-AMM-228-00014-080184, 
Revision 3, October 30, 2012;
    (v) Pages 1 and 2, Overhead Panel 6VE--Description, in subject 
31-10-08, dated November 25, 2009, of Chapter 31, Indicating/
Recording Systems, in RUAG Aerospace Services GmbH Dornier 228 
Airplane Maintenance Manual, TM-AMM-228-00014-080184, Revision 3, 
October 30, 2012;
    (vi) Pages 201 through 204, Overhead Panel 6VE--Maintenance 
Practices, in subject 31-10-08, dated November 25, 2009, of Chapter 
31, Indicating/Recording Systems, in RUAG Aerospace Services GmbH 
Dornier 228 Airplane Maintenance Manual, TM-AMM-228-00014-080184, 
Revision 3, October 30, 2012.
    (2) If any chafed or damaged wires are found during any 
inspection required in paragraph (f)(1) of this AD, before further 
flight, repair the affected wire(s) and assure correct installation 
of the wiring in the flight deck overhead panels by reattaching or 
replacing the wire tie attachment holders and securing any loose 
wires to the wire tie attachment holders with plastic wire ties 
following:
    (i) Pages 1 through 10, Overhead Panel 5VE--Description, dated 
November 25, 2009, in subject 31-10-07, of Chapter 31, Indicating/
Recording Systems, in RUAG Aerospace Services GmbH Dornier 228 
Airplane Maintenance Manual, TM-AMM-228-00014-080184, Revision 3, 
October 30, 2012;
    (ii) Pages 201 through 208, Overhead Panel 5VE--Maintenance 
Practices, dated November 25, 2009, in subject 31-10-07, of Chapter 
31, Indicating/Recording Systems, in RUAG Aerospace Services GmbH 
Dornier 228 Airplane Maintenance Manual, TM-AMM-228-00014-080184, 
Revision 3, October 30, 2012;
    (iii) Pages 1 and 2, Overhead Panel 6VE--Description, in subject 
31-10-08, dated November 25, 2009, of Chapter 31, Indicating/
Recording Systems, in RUAG Aerospace Services GmbH Dornier 228 
Airplane Maintenance Manual, TM-AMM-228-00014-080184, Revision 3, 
October 30, 2012;
    (iv) Pages 201 through 204, Overhead Panel 6VE--Maintenance 
Practices, in subject 31-10-08, dated November 25, 2009, of Chapter 
31, Indicating/Recording Systems, in RUAG Aerospace Services GmbH 
Dornier 228 Airplane Maintenance Manual, TM-AMM-228-00014-080184, 
Revision 3, October 30, 2012.
    (3) To comply with the actions of this AD, you may insert a copy 
of this AD or a copy of the required actions of this AD into the 
instructions for continued airworthiness section of the FAA-approved 
maintenance program (e.g., maintenance manual). This action may be 
done by an owner/operator (pilot) holding at least a private pilot 
certificate and must be entered into the airplane records showing 
compliance with this AD in accordance with 14 CFR 43.9 (a)(1)(4) and 
14 CFR 91.417(a)(2)(v). The record must be maintained as required by 
14 CFR 91.173 or 135.439.

(g) Other FAA AD Provisions

    The following provisions also apply to this AD:
    (1) Alternative Methods of Compliance (AMOCs): The Manager, 
Standards Office, FAA, has the authority to approve AMOCs for this 
AD, if requested using the procedures found in 14 CFR 39.19. Send 
information to ATTN: Karl Schletzbaum, Aerospace Engineer, FAA, 
Small Airplane Directorate, 901 Locust, Room 301, Kansas City, 
Missouri 64106; telephone: (816) 329-4146; fax: (816) 329-4090; 
email: karl.schletzbaum@faa.gov. Before using any approved AMOC on 
any airplane to which the AMOC applies, notify your appropriate 
principal inspector (PI) in the FAA Flight Standards District Office 
(FSDO), or lacking a PI, your local FSDO.
    (2) Airworthy Product: For any requirement in this AD to obtain 
corrective actions from a manufacturer or other source, use these 
actions if they are FAA-approved. Corrective actions are considered 
FAA-approved if they are approved by the State of Design Authority 
(or their delegated agent). You are required to assure the product 
is airworthy before it is returned to service.

(h) Related Information

    Refer to MCAI European Aviation Safety Agency (EASA) AD No.: 
2013-0244, dated October 4, 2013, for related information. You may 
examine the MCAI on the Internet at http://www.regulations.gov/#!documentDetail;D=FAA-2013-1056-0002.

(i) Material Incorporated by Reference

    (1) The Director of the Federal Register approved the 
incorporation by reference (IBR) of the service information listed 
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.

[[Page 35488]]

    (2) You must use this service information as applicable to do 
the actions required by this AD, unless the AD specifies otherwise.
    (i) Chapter 05, Time Limits/Maintenance Checks--General, in RUAG 
Aerospace Services GmbH Dornier 228 Time Limits/Maintenance Checks 
Manual (TLMCM), TM-TLMCM-090305-ALL, Revision 5, March 20, 2011:
    (A) Page 5, in section 05-22-10, Zonal Inspection Program, dated 
May 1, 2006;
    (B) Page 5, in section 05-26-10, Low Utilization Zonal 
Inspection Program, dated May 1, 2006.
    (ii) Chapter 31, Indicating/Recording Systems, in RUAG Aerospace 
Services GmbH Dornier 228 Airplane Maintenance Manual, TM-AMM-228-
00014-080184, Revision 3, October 30, 2012:
    (A) Pages 1 through 10, Overhead Panel 5VE--Description, in 
subject 31-10-07, dated November 25, 2009;
    (B) Pages 201 through 208, Overhead Panel 5VE--Maintenance 
Practices, in subject 31-10-07, dated November 25, 2009;
    (C) Pages 1 and 2, Overhead Panel 6VE--Description, in subject 
31-10-08, dated November 25, 2009;
    (D) Pages 201 through 204, Overhead Panel 6VE--Maintenance 
Practices, in subject 31-10-08, dated November 25, 2009.
    (3) For service information identified in this AD, contact RUAG 
Aerospace Services GmbH, Dornier 228 Customer Support, P.O. Box 
1253, 82231 Wessling, Germany; telephone: +49 (0) 8153-30 2220; fax: 
+49 (0) 8153-30 4258; email: custsupport.dornier228@ruag.com; 
Internet: http://www.ruag.com/en/Aviation/Aviation_Home.
    (4) You may view this referenced service information at the FAA, 
Small Airplane Directorate, 901 Locust, Kansas City, Missouri 64106. 
For information on the availability of this material at the FAA, 
call (816) 329-4148.
    (5) You may view this service information that is incorporated 
by reference at the National Archives and Records Administration 
(NARA). For information on the availability of this material at 
NARA, call 202-741-6030, or go to: http://www.archives.gov/federal-register/cfr/ibr-locations.html.

    Issued in Kansas City, Missouri, on June 13, 2014.
Earl Lawrence,
Manager, Small Airplane Directorate, Aircraft Certification Service.
[FR Doc. 2014-14336 Filed 6-20-14; 8:45 am]
BILLING CODE 4910-13-P


