
[Federal Register Volume 80, Number 154 (Tuesday, August 11, 2015)]
[Rules and Regulations]
[Pages 48019-48022]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-19182]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2013-0834; Directorate Identifier 2012-NM-045-AD; 
Amendment 39-18227; AD 2015-16-02]
RIN 2120-AA64


Airworthiness Directives; Airbus Airplanes

AGENCY: Federal Aviation Administration (FAA), Department of 
Transportation (DOT).

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: We are superseding Airworthiness Directives (AD) 2003-14-11, 
AD 2004-11-08, AD 2004-13-25, AD 2004-18-14, AD 2007-05-12, AD 2008-06-
07, AD 2009-18-20, AD 2010-15-02, and AD 2012-04-07 that apply to 
certain Airbus Model A330 and A340 series airplanes. AD 2003-14-11, AD 
2004-11-08, AD 2004-13-25, AD 2004-18-14, AD 2007-05-12, AD 2008-06-07, 
AD 2009-18-20, AD 2010-15-02, and AD 2012-04-07 required revising the 
maintenance program to incorporate certain maintenance requirements and 
airworthiness limitations; replacing certain flap rotary actuators; 
repetitively inspecting elevator servo-controllers and pressure relief 
valves of the spoiler servo controls; repetitively testing the elevator 
servo control loops, modifying the elevator servo controls, and 
repetitively replacing certain retraction brackets of the main landing 
gear; and revising the airplane flight manual. This new AD requires 
revising the maintenance program or inspection program to incorporate 
certain maintenance requirements and airworthiness limitations. This 
new AD also removes Airbus Model A340-200, -300, -500, and -600 series 
airplanes from the applicability and adds Airbus Model A330-323 
airplanes to the applicability. This AD was prompted by a determination 
that more restrictive maintenance requirements and airworthiness 
limitations are necessary. We are issuing this AD to address the aging 
effects of aircraft systems. Such aging effects could change the 
characteristics of those systems, which, in isolation or in combination 
with one or more other specific failures or events, could result in 
failure of certain life limited parts, which could reduce the 
structural integrity of the airplane or reduce the controllability of 
the airplane.

DATES: This AD becomes effective September 15, 2015.
    The Director of the Federal Register approved the incorporation by 
reference of certain publications listed in this AD as of September 15, 
2015.

ADDRESSES: You may examine the AD docket on the Internet at http://www.regulations.gov/#!docketDetail;D=FAA-2013-0834; or in person at the 
Docket Management Facility, U.S. Department of Transportation, Docket 
Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New 
Jersey Avenue SE., Washington, DC.
    For service information identified in this AD, contact Airbus SAS, 
Airworthiness Office--EAL, 1 Rond Point Maurice Bellonte, 31707 Blagnac 
Cedex, France; telephone +33 5 61 93 36 96; fax +33 5 61 93 45 80; 
email airworthiness.A330-A340@airbus.com; Internet http://www.airbus.com. You may view this referenced service information at the 
FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. 
For information on the availability of this material at the FAA, call 
425-227-1221. It is also available on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2013-
0834.

FOR FURTHER INFORMATION CONTACT: Vladimir Ulyanov, Aerospace Engineer, 
International Branch, ANM-116, Transport Airplane Directorate, FAA, 
1601 Lind Avenue SW., Renton, WA 98057-3356; telephone 425-227-1138; 
fax 425-227-1149.

SUPPLEMENTARY INFORMATION:

Discussion

    We issued a supplemental notice of proposed rulemaking (SNPRM) to 
amend 14 CFR part 39 to revise the following airworthiness directives 
that applied to certain Airbus Model A330 and A340 series airplanes.
     AD 2003-14-11, Amendment 39-13230 (68 FR 41521, July 14, 
2003).
     AD 2004-11-08, Amendment 39-13654 (69 FR 31874, June 8, 
2004).
     AD 2004-13-25, Amendment 39-13707 (69 FR 41394, July 9, 
2004).
     AD 2004-18-14, Amendment 39-13793 (69 FR 55326, September 
14, 2004).
     AD 2007-05-12, Amendment 39-14973 (72 FR 10057, March 7, 
2007).
     AD 2008-06-07, Amendment 39-15419 (73 FR 13103, March 12, 
2008; corrected April 15, 2008 (73 FR 20367)).
     AD 2009-18-20, Amendment 39-16017 (74 FR 46313, September 
9, 2009).
     AD 2010-15-02, Amendment 39-16368 (75 FR 42589, July 22, 
2010).
     AD 2012-04-07, Amendment 39-16963 (77 FR 12989, March 5, 
2012).

[[Page 48020]]

    The SNPRM published in the Federal Register on March 9, 2015 (80 FR 
12360). We preceded the SNPRM with a notice of proposed rulemaking 
(NPRM) that published in the Federal Register on November 7, 2013 (78 
FR 66861). The NPRM was prompted by a determination that more 
restrictive maintenance requirements and airworthiness limitations were 
necessary. The NPRM proposed to supersede AD 2003-14-11, Amendment 39-
13230 (68 FR 41521, July 14, 2003); AD 2004-11-08, Amendment 39-13654 
(69 FR 31874, June 8, 2004); AD 2004-13-25, Amendment 39-13707 (69 FR 
41394, July 9, 2004); AD 2004-18-14, Amendment 39-13793 (69 FR 55326, 
September 14, 2004); AD 2008-06-07, Amendment 39-15419 (73 FR 13103, 
March 12, 2008; corrected April 15, 2008 (73 FR 20367)); and AD 2012-
04-07, Amendment 39-16963 (77 FR 12989, March 5, 2012) to require 
actions intended to address the aging effects of aircraft systems. The 
NPRM proposed to require revising the maintenance program or inspection 
program, as applicable, to incorporate certain maintenance requirements 
and airworthiness limitations.
    The SNPRM (80 FR 12360, March 9, 2015) proposed to supersede AD 
2007-05-12, Amendment 39-14973 (72 FR 10057, March 7, 2007); AD 2009-
18-20, Amendment 39-16017 (74 FR 46313, September 9, 2009); and AD 
2010-15-02, Amendment 39-16368 (75 FR 42589, July 22, 2010); in 
addition to those ADs already identified in the NPRM (78 FR 66861, 
November 7, 2013), as well as to require more restrictive limitations 
and to add Airbus Model A330-323 airplanes to the applicability. We are 
issuing this AD to address the aging effects of aircraft systems. Such 
aging effects could change the characteristics of those systems, which, 
in isolation or in combination with one or more other specific failures 
or events, could result in failure of certain life limited parts, which 
could reduce the structural integrity of the airplane or reduce the 
controllability of the airplane.
    The European Aviation Safety Agency (EASA) which is the Technical 
Agent for the Member States of the European Union, has issued EASA 
Airworthiness Directive 2013-0268, dated November 7, 2013 (referred to 
after this as the Mandatory Continuing Airworthiness Information, or 
``the MCAI''), to correct an unsafe condition on certain Airbus Model 
A330 series airplanes. EASA AD 2013-0268 supersedes and retains the 
requirements of four EASA ADs and requires accomplishment of the 
actions specified in Airbus A330 Airworthiness Limitations Section 
(ALS) Part 4--Aging Systems Maintenance, Revision 04, dated August 27, 
2013. The MCAI states:

    The airworthiness limitations for Airbus aeroplanes are 
currently published in Airworthiness Limitations Section (ALS) 
documents.
    The airworthiness limitations applicable to the Ageing Systems 
Maintenance (ASM) are given in Airbus A330 ALS Part 4, which is 
approved by EASA.
    Revision 04 of Airbus A330 ALS Part 4 introduces more 
restrictive maintenance requirements and/or airworthiness 
limitations. Failure to comply with these instructions could result 
in an unsafe condition.
    For the reason described above, this [EASA] AD retains the 
requirements of EASA AD 2012-0020 [http://ad.easa.europa.eu/ad/2012-0020], which is superseded, and requires accomplishment of the 
actions specified in Airbus A330 ALS Part 4 at Revision 04.
    In addition, this [EASA] AD also supersedes EASA AD 2006-0159 
[http://ad.easa.europa.eu/ad/2006-0159], EASA AD 2008-0026 [http://ad.easa.europa.eu/ad/2008-0026] and EASA AD 2008-0160 [http://ad.easa.europa.eu/ad/2008-0160] [which correspond to FAA ADs 2007-
05-12, Amendment 39-14973 (72 FR 10057, March 7, 2007); 2010-15-02, 
Amendment 39-16368 (75 FR 42589, July 22, 2010); and 2009-18-20, 
Amendment 39-16017 (74 FR 46313, September 9, 2009), respectively], 
whose requirements applicable to A330 aeroplanes have been 
transferred into Airbus A330 ALS Part 4.

You may examine the MCAI in the AD docket on the Internet at http://www.regulations.gov by searching for and locating it in Docket No. FAA-
2013-0834.

Comments

    We gave the public the opportunity to participate in developing 
this AD. We considered the comment received. An anonymous commenter 
supported the SNPRM (80 FR 12360, March 9, 2015).

Conclusion

    We reviewed the available data, including the comment received, and 
determined that air safety and the public interest require adopting 
this AD as proposed except for minor editorial changes. We have 
determined that these minor changes:
     Are consistent with the intent that was proposed in the 
SNPRM (80 FR 12360, March 9, 2015) for correcting the unsafe condition; 
and
     Do not add any additional burden upon the public than was 
already proposed in the SNPRM (80 FR 12360, March 9, 2015).

Related Service Information Under 1 CFR Part 51

    Airbus issued A330 Airworthiness Limitations Section (ALS) Part 4--
Aging Systems Maintenance, Revision 04, dated August 27, 2013, and 
Airbus A330 ALS Part 4--Aging Systems Maintenance (ASM), Variation 4.1 
and Variation 4.2, both dated July 23, 2014. This service information 
describes preventative maintenance requirements and associated 
airworthiness limitations applicable to aircraft systems susceptible to 
aging effects. This service information is reasonably available because 
the interested parties have access to it through their normal course of 
business or by the means identified in the ADDRESSES section of this 
AD.

Costs of Compliance

    We estimate that this AD affects 79 airplanes of U.S. registry.
    We estimate that it will take about 2 work-hours per product to 
comply with the new basic requirements of this AD. The average labor 
rate is $85 per work-hour. Required parts will cost $0 per product. 
Based on these figures, we estimate the cost of this AD on U.S. 
operators to be $13,430, or $170 per product.

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. ``Subtitle VII: Aviation 
Programs,'' describes in more detail the scope of the Agency's 
authority.
    We are issuing this rulemaking under the authority described in 
``Subtitle VII, Part A, Subpart III, Section 44701: General 
requirements.'' Under that section, Congress charges the FAA with 
promoting safe flight of civil aircraft in air commerce by prescribing 
regulations for practices, methods, and procedures the Administrator 
finds necessary for safety in air commerce. This regulation is within 
the scope of that authority because it addresses an unsafe condition 
that is likely to exist or develop on products identified in this 
rulemaking action.

Regulatory Findings

    We determined that this AD will not have federalism implications 
under Executive Order 13132. This AD will not have a substantial direct 
effect on the States, on the relationship between the national 
government and the States, or on the distribution of power and 
responsibilities among the various levels of government.

[[Page 48021]]

    For the reasons discussed above, I certify that this AD:
    1. Is not a ``significant regulatory action'' under Executive Order 
12866;
    2. Is not a ``significant rule'' under the DOT Regulatory Policies 
and Procedures (44 FR 11034, February 26, 1979);
    3. Will not affect intrastate aviation in Alaska; and
    4. Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

Examining the AD Docket

    You may examine the AD docket on the Internet at http://www.regulations.gov/#!docketDetail;D=FAA-2013-0834; or in person at the 
Docket Management Facility between 9 a.m. and 5 p.m., Monday through 
Friday, except Federal holidays. The AD docket contains this AD, the 
regulatory evaluation, any comments received, and other information. 
The street address for the Docket Operations office (telephone 800-647-
5527) is in the ADDRESSES section.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

Adoption of the Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority:  49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by
0
a. Removing Airworthiness Directive (AD) 2003-14-11, Amendment 39-13230 
(68 FR 41521, July 14, 2003); AD 2004-11-08, Amendment 39-13654 (69 FR 
31874, June 8, 2004); AD 2004-13-25, Amendment 39-13707 (69 FR 41394, 
July 9, 2004); AD 2004-18-14, Amendment 39-13793 (69 FR 55326, 
September 14, 2004); AD 2007-05-12, Amendment 39-14973 (72 FR 10057, 
March 7, 2007); AD 2008-06-07, Amendment 39-15419 (73 FR 13103, March 
12, 2008; corrected April 15, 2008 (73 FR 20367)); AD 2009-18-20, 
Amendment 39-16017 (74 FR 46313, September 9, 2009); AD 2010-15-02, 
Amendment 39-16368 (75 FR 42589, July 22, 2010); AD 2012-04-07, 
Amendment 39-16963 (77 FR 12989, March 5, 2012); and
0
b. Adding the following new AD:

2015-16-02 Airbus: Amendment 39-18227. Docket No. FAA-2013-0834; 
Directorate Identifier 2012-NM-045-AD.

(a) Effective Date

    This AD becomes effective September 15, 2015.

(b) Affected ADs

    This AD replaces the ADs specified in paragraphs (b)(1) through 
(b)(9) of this AD.
    (1) AD 2003-14-11, Amendment 39-13230 (68 FR 41521, July 14, 
2003).
    (2) AD 2004-11-08, Amendment 39-13654 (69 FR 31874, June 8, 
2004).
    (3) AD 2004-13-25, Amendment 39-13707 (69 FR 41394, July 9, 
2004).
    (4) AD 2004-18-14, Amendment 39-13793 (69 FR 55326, September 
14, 2004).
    (5) AD 2007-05-12, Amendment 39-14973 (72 FR 10057, March 7, 
2007).
    (6) AD 2008-06-07, Amendment 39-15419 (73 FR 13103, March 12, 
2008; corrected April 15, 2008 (73 FR 20367)).
    (7) AD 2009-18-20, Amendment 39-16017 (74 FR 46313, September 9, 
2009).
    (8) AD 2010-15-02, Amendment 39-16368 (75 FR 42589, July 22, 
2010).
    (9) AD 2012-04-07, Amendment 39-16963 (77 FR 12989, March 5, 
2012).

(c) Applicability

    This AD applies to Airbus Model A330-201, -202, -203, -223, -
243, -223F, -243F, -301, -302, -303, -321, -322, -323, -341, -342, 
and -343 airplanes; certificated in any category; all manufacturer 
serial numbers.

(d) Subject

    Air Transport Association (ATA) of America Code 05, Time Limits/
Maintenance Checks.

(e) Unsafe Condition

    This AD was prompted by a determination that more restrictive 
maintenance requirements and airworthiness limitations are 
necessary. We are issuing this AD to address the aging effects of 
aircraft systems. Such aging effects could change the 
characteristics of those systems, which, in isolation or in 
combination with one or more other specific failures or events, 
could result in failure of certain life limited parts, which could 
reduce the structural integrity of the airplane or reduce the 
controllability of the airplane.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Maintenance Program Revision and Actions

    Within 6 months after the effective date of this AD, revise the 
maintenance program or inspection program, as applicable, by 
incorporating Airbus A330 Airworthiness Limitations Section (ALS) 
Part 4--Aging Systems Maintenance, Revision 04, dated August 27, 
2013, and Airbus A330 ALS Part 4--Aging Systems Maintenance (ASM), 
Variation 4.1 and Variation 4.2, both dated July 23, 2014. The 
initial compliance times for the actions are within the applicable 
compliance times specified in the Record of Revisions pages of 
Airbus A330 ALS Part 4--Aging Systems Maintenance, Revision 04, 
dated August 27, 2013, Airbus A330 ALS Part 4--Aging Systems 
Maintenance (ASM), Variation 4.1 and Variation 4.2, both dated July 
23, 2014, or within 6 months after the effective date of this AD, 
whichever is later, except as required by paragraph (h) of this AD.

(h) Exceptions to Initial Compliance Times

    (1) Where Airbus A330 ALS Part 4--Aging Systems Maintenance, 
Revision 04, dated August 27, 2013, defines a calendar compliance 
time for elevator servo-controls having part number (P/N) SC4800-2, 
SC4800-3, SC4800-4, SC4800-6, SC4800-7, or SC4800-8 as ``August 31, 
2004,'' the calendar compliance time is June 13, 2007 (34 months 
after August 13, 2004 (the effective date of AD 2004-13-25, 
Amendment 39-13707 (69 FR 41394, July 9, 2004))).
    (2) Where Airbus A330 ALS Part 4--Aging Systems Maintenance, 
Revision 04, dated August 27, 2013, defines a calendar compliance 
time for spoiler servo-controls (SSCs) having P/N 1386A0000-01, P/N 
1386B0000-01, P/N 1387A0000-01 or P/N 1387B0000-01 as ``December 31, 
2003,'' the calendar compliance time is November 19, 2005 (13 months 
after October 19, 2004 (the effective date of AD 2004-18-14, 
Amendment 39-13793 (69 FR 55326, September 14, 2004))).
    (3) Where Airbus A330 ALS Part 4--Aging Systems Maintenance, 
Revision 04, dated August 27, 2013, defines a calendar compliance 
time for elevator servo-controls having P/N SC4800-73, SC4800-93, 
SC4800-103 and SC4800-113 as ``June 30, 2008,'' the calendar 
compliance time is September 16, 2009 (17 months after April 16, 
2008 (the effective date of AD 2008-06-07, Amendment 39-15419 (73 FR 
13103, March 12, 2008; corrected April 15, 2008 (73 FR 20367)))).
    (4) The initial compliance time for replacement of the 
retraction brackets of the main landing gear (MLG) having a part 
number specified in paragraphs (h)(4)(i) through (h)(4)(xvi) of this 
AD is before the accumulation of 19,800 total landings on the 
affected retraction brackets of the MLG, or within 900 flight hours 
after April 9, 2012 (the effective date of AD 2012-04-07, Amendment 
39-16963 (77 FR 12989, March 5, 2012), whichever occurs later.
    (i) 201478303
    (ii) 201478304
    (iii) 201478305
    (iv) 201478306
    (v) 201478307
    (vi) 201478308
    (vii) 201428380
    (viii) 201428381
    (ix) 201428382
    (x) 201428383
    (xi) 201428384
    (xii) 201428385
    (xiii) 201428378
    (xiv) 201428379

[[Page 48022]]

    (xv) 201428351
    (xvi) 201428352
    (5) Where Airbus A330 ALS Part 4--Aging Systems Maintenance, 
Revision 04, dated August 27, 2013, defines a calendar compliance 
time for the modification of SSCs on three hydraulic circuits having 
part numbers MZ4339390-01X, MZ4306000-01X, MZ4339390-02X, MZ4306000-
02X, MZ4339390-10X, or MZ4306000-10X as ``March 5, 2010,'' the 
calendar compliance time is April 14, 2011 (18 months after October 
14, 2009 (the effective date of AD 2009-18-20, Amendment 39-16017 
(74 FR 46313, September 9, 2009))).
    (6) Where Note (6) of ``ATA 27-64-00 Flight Control--Spoiler 
Hydraulic Actuation,'' of Sub-part 4-2-1, ``Life Limits,'' of Sub-
part 4-2, ``Systems Life Limited Components,'' of Airbus A330 ALS 
Part 4--Aging Systems Maintenance, Revision 04, dated August 27, 
2013, defines a calendar date of ``September 5, 2008,'' as a date 
for the determination of accumulated flight cycles since the 
aircraft initial entry into service, the date is October 14, 2009 
(the effective date of AD 2009-18-20, Amendment 39-16017 (74 FR 
46313, September 9, 2009)).
    (7) Where Note (6) of ``ATA 27-64-00 Flight Control--Spoiler 
Hydraulic Actuation,'' of Sub-part 4-2-1, ``Life Limits,'' of Sub-
part 4-2, ``Systems Life Limited Components,'' of Airbus A330 ALS 
Part 4--Aging Systems Maintenance, Revision 04, dated August 27, 
2013, defines a calendar compliance time as ``March 5, 2010,'' for 
the modification of affected servo controls, the calendar compliance 
time is April 14, 2011 (18 months after October 14, 2009 (the 
effective date of AD 2009-18-20, Amendment 39-16017 (74 FR 46313, 
September 9, 2009))).

(i) No Alternative Actions or Intervals

    After accomplishing the revision required by paragraph (g) of 
this AD, no alternative actions (e.g., inspections) or intervals may 
be used unless the actions or intervals are approved as an 
alternative method of compliance (AMOC) in accordance with the 
procedures specified in paragraph (j)(1) of this AD.

(j) Other FAA AD Provisions

    The following provisions also apply to this AD:
    (1) Alternative Methods of Compliance (AMOCs): The Manager, 
International Branch, ANM-116, Transport Airplane Directorate, FAA, 
has the authority to approve AMOCs for this AD, if requested using 
the procedures found in 14 CFR 39.19. In accordance with 14 CFR 
39.19, send your request to your principal inspector or local Flight 
Standards District Office, as appropriate. If sending information 
directly to the International Branch, send it to ATTN: Vladimir 
Ulyanov, Aerospace Engineer, International Branch, ANM-116, 
Transport Airplane Directorate, FAA, 1601 Lind Avenue SW., Renton, 
WA 98057-3356; telephone 425-227-1138; fax 425-227-1149. Information 
may be emailed to: 9-ANM-116-ACO-AMOC-REQUESTS@faa.gov. Before using 
any approved AMOC, notify your appropriate principal inspector, or 
lacking a principal inspector, the manager of the local flight 
standards district office/certificate holding district office. The 
AMOC approval letter must specifically reference this AD.
    (2) Contacting the Manufacturer: For any requirement in this AD 
to obtain corrective actions from a manufacturer, the action must be 
accomplished using a method approved by the Manager, International 
Branch, ANM-116, Transport Airplane Directorate, FAA; or the 
European Aviation Safety Agency (EASA); or Airbus's EASA Design 
Organization Approval (DOA). If approved by the DOA, the approval 
must include the DOA-authorized signature.

(k) Related Information

    Refer to Mandatory Continuing Airworthiness Information (MCAI) 
European Aviation Safety Agency (EASA) AD 2013-0268, dated November 
7, 2013, for related information. This MCAI may be found in the AD 
docket on the Internet at http://www.regulations.gov by searching 
for and locating Docket No. FAA-2013-0834.

(l) Material Incorporated by Reference

    (1) The Director of the Federal Register approved the 
incorporation by reference (IBR) of the service information listed 
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
    (2) You must use this service information as applicable to do 
the actions required by this AD, unless this AD specifies otherwise.
    (i) Airbus A330 Airworthiness Limitations Section ALS Part 4--
Aging Systems Maintenance, Revision 04, dated August 27, 2013.
    (ii) Airbus A330 ALS Part 4--Aging Systems Maintenance (ASM), 
Variation 4.1, dated July 23, 2014.
    (iii) Airbus A330 ALS Part 4--Aging Systems Maintenance (ASM), 
Variation 4.2, dated July 23, 2014.
    (3) For service information identified in this AD, contact 
Airbus SAS, Airworthiness Office--EAL, 1 Rond Point Maurice 
Bellonte, 31707 Blagnac Cedex, France; telephone +33 5 61 93 36 96; 
fax +33 5 61 93 45 80; email airworthiness.A330-A340@airbus.com; 
Internet http://www.airbus.com.
    (4) You may view this service information at the FAA, Transport 
Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For 
information on the availability of this material at the FAA, call 
425-227-1221.
    (5) You may view this service information that is incorporated 
by reference at the National Archives and Records Administration 
(NARA). For information on the availability of this material at 
NARA, call 202-741-6030, or go to: http://www.archives.gov/federal-register/cfr/ibr-locations.html.

    Issued in Renton, Washington, on July 28, 2015.
Michael Kaszycki,
Acting Manager, Transport Airplane Directorate, Aircraft Certification 
Service.
[FR Doc. 2015-19182 Filed 8-10-15; 08:45 am]
 BILLING CODE 4910-13-P


