
[Federal Register Volume 79, Number 233 (Thursday, December 4, 2014)]
[Notices]
[Page 72055]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-28519]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration


Agency Information Collection Activities: Requests for Comments; 
Clearance of Renewed Approval of Information Collection: Certification 
Procedures for Products and Parts

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Notice and request for comments.

-----------------------------------------------------------------------

SUMMARY: In accordance with the Paperwork Reduction Act of 1995, FAA 
invites public comments about our intention to request the Office of 
Management and Budget (OMB) approval to renew an information 
collection. 14 CFR part 21 prescribes certification standards for 
aircraft, aircraft engines, propellers appliances and parts. The 
information collected is used to determine compliance and applicant 
eligibility. The respondents are aircraft parts designers, 
manufacturers, and aircraft owners.

DATES: Written comments should be submitted by February 2, 2015.

ADDRESSES: Send comments to the FAA at the following address: Ms. Kathy 
DePaepe, Room 126B, Federal Aviation Administration, ASP-110, 6500 S. 
MacArthur Blvd., Oklahoma City, OK 73169.
    Public Comments Invited: You are asked to comment on any aspect of 
this information collection, including (a) Whether the proposed 
collection of information is necessary for FAA's performance; (b) the 
accuracy of the estimated burden; (c) ways for FAA to enhance the 
quality, utility and clarity of the information collection; and (d) 
ways that the burden could be minimized without reducing the quality of 
the collected information. The agency will summarize and/or include 
your comments in the request for OMB's clearance of this information 
collection.

FOR FURTHER INFORMATION CONTACT: Kathy DePaepe at (405) 954-9362, or by 
email at: Kathy.DePaepe@faa.gov.

SUPPLEMENTARY INFORMATION:
    OMB Control Number: 2120-0018.
    Title: Certification Procedures for Products and Parts.
    Form Numbers: FAA Forms 8110-12, 8130-1, 8130-6, 8130-9, 8130-12.
    Type of Review: Renewal of an information collection.
    Background: 14 CFR part 21 prescribes certification standards for 
aircraft, aircraft engines, propellers appliances and parts. The 
information collected is used to determine compliance and applicant 
eligibility. FAA Airworthiness inspectors, designated inspectors, 
engineers, and designated engineers review the required data submittals 
to determine that aviation products and articles and their 
manufacturing facilities comply with the applicable requirements, and 
that the products and articles have no unsafe features.
    Respondents: Approximately 13,339 aircraft parts designers, 
manufacturers, and aircraft owners.
    Frequency: Information is collected on occasion.
    Estimated Average Burden per Response: 30 minutes.
    Estimated Total Annual Burden: 19,487 hours.

    Issued in Washington, DC, on December 1, 2014.
Albert R. Spence,
FAA Assistant Information Collection Clearance Officer, IT Enterprises 
Business Services Division, ASP-110.
[FR Doc. 2014-28519 Filed 12-3-14; 8:45 am]
BILLING CODE 4910-13-P


