
[Federal Register Volume 77, Number 11 (Wednesday, January 18, 2012)]
[Rules and Regulations]
[Pages 2442-2446]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2012-468]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2009-1221; Directorate Identifier 2008-NM-097-AD; 
Amendment 39-16881; AD 2011-25-05]
RIN 2120-AA64


Airworthiness Directives; The Boeing Company Airplanes

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: We are adopting a new airworthiness directive (AD) for The 
Boeing Company Model 767 airplanes. This AD requires installing new 
panel assemblies in the main equipment center or on the forward cargo 
compartment sidewall and removing certain relays from some panels in 
the main equipment center. This AD also requires revising the 
maintenance program to incorporate Airworthiness Limitations (AWLs) No. 
28-AWL-27 and No. 28-AWL-28. This AD also includes an alternative 
location for the installation of the new panel assemblies for airplanes 
that have the optional water system drain plumbing and changing the 
interconnecting wiring between the P141 panel and the P36 and P37 
panels. For airplanes with a deactivated center fuel tank, this AD also 
requires an alternative functional test for the left and right 
override/jettison pumps. We are issuing this AD to prevent possible 
sources of ignition in a fuel tank caused by electrical fault or 
uncommanded dry operation of the main tank boost pumps and center 
auxiliary tank override and jettison pumps. This AD was prompted by 
fuel system reviews conducted by the manufacturer. An ignition source 
in the fuel tank could result in a fire or an explosion and consequent 
loss of the airplane.

DATES: This AD is effective February 22, 2012.
    The Director of the Federal Register approved the incorporation by 
reference of certain publications listed in the AD as of February 22, 
2012.
    The Director of the Federal Register previously approved the 
incorporation by reference of certain other publications listed in this 
AD as of January 12, 2010 (74 FR 68515, December 28, 2009).
    The Director of the Federal Register previously approved the 
incorporation by reference of certain other publications listed in this 
AD as of September 9, 2009 (74 FR 38905, August 5, 2009).
    For service information identified in this AD contact Boeing 
Commercial Airplanes, Attention: Data & Services Management, P.O. Box 
3707, MC 2H-65, Seattle, Washington 98124-2207; telephone (206) 544-
5000, extension 1; fax (206) 766-5680; email me.boecom@boeing.com; 
Internet https://www.myboeingfleet.com. You may review copies of the 
referenced service information at the FAA, Transport Airplane 
Directorate, 1601 Lind Avenue SW., Renton, Washington. For information 
on the availability of this material at the FAA, call (425) 227-1221.

Examining the AD Docket

    You may examine the AD docket on the Internet at http://www.regulations.gov; or in person at the Docket Management Facility 
between 9 a.m. and 5 p.m., Monday through Friday, except Federal 
holidays. The AD docket contains this AD, the regulatory evaluation, 
any comments received, and other information. The address for the 
Docket Office (phone: (800) 647-5527) is Document Management Facility, 
U.S. Department of Transportation, Docket Operations, M-30, West 
Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE., 
Washington, DC 20590.

FOR FURTHER INFORMATION CONTACT: Elias Natsiopoulos, Aerospace 
Engineer, Systems and Equipment Branch, ANM-130S, FAA, Seattle Aircraft 
Certification Office, 1601 Lind Avenue SW., Renton, Washington 98057-
3356; phone: (425) 917-6478; fax: (425) 917-6590; email: 
elias.natsiopoulos@faa.gov.

SUPPLEMENTARY INFORMATION:

Discussion

    We issued a supplemental notice of proposed rulemaking (NPRM) to 
amend 14 CFR part 39 to include an airworthiness directive (AD) that 
would apply to the specified products. That supplemental NPRM published 
in the Federal Register on April 5, 2011 (76 FR 18664). That 
supplemental NPRM proposed to require installing new panel assemblies 
in the main equipment center or on the forward cargo compartment 
sidewall and removing certain relays from some panels in the main 
equipment center. That supplemental NPRM also proposed to require 
revising the maintenance program to incorporate Airworthiness 
Limitations (AWLs) No. 28-AWL-27 and No. 28-AWL-28. For certain 
airplanes that supplemental NPRM proposed to require prior or 
concurrent

[[Page 2443]]

installation of a second fuel crossfeed valve. That supplemental NPRM 
also proposed an alternative location for the installation of the new 
panel assemblies for airplanes that have the optional water system 
drain plumbing and changing the interconnecting wiring between the P141 
panel and the P36 and P37 panels. For airplanes with a deactivated 
center fuel tank, that supplemental NPRM proposed to require an 
alternative functional test for the left and right override/jettison 
pumps.

Comments

    We gave the public the opportunity to participate in developing 
this AD. The following presents the comments received on the 
supplemental NPRM (76 FR 18664, April 5, 2011) and the FAA's response 
to each comment.

Support for Supplemental NPRM (76 FR 18664, April 5, 2011)

    Boeing concurs with the content of the supplemental NPRM (76 FR 
18664, April 5, 2011). Continental Airlines has no technical objections 
or comments to the supplemental NPRM.

Requests To Revise or Remove Paragraph (j) of the Supplemental NPRM (76 
FR 18664, April 5, 2011)

    Several commenters requested to either revise or remove paragraph 
(j) of the supplemental NPRM (76 FR 18664, April 5, 2011). ABX Air 
recommended that paragraph (j) of the supplemental NPRM be revised to 
specify that prior or concurrent accomplishment of Boeing Service 
Bulletin 767-28-0034, Revision 3, dated March 14, 1996, is only 
required if Boeing Service Bulletin 767-28A0085, Revision 2, dated 
August 19, 2010, has been done in accordance with the requirements in 
paragraph (g) of the supplemental NPRM. ABX added that an operator may 
choose not to incorporate Boeing Service Bulletin 767-28-0034 as long 
as an alternative method which complies with the requirements in 
paragraph (g) is approved in accordance with paragraph (o) of the 
supplemental NPRM. British Airways (BAB) requested that the requirement 
in paragraph (j) of the supplemental NPRM be removed for any 
alternative designs (e.g., TDG Aerospace UFI). Japan Airlines (JAL) 
noted that the installation of a second crossfeed valve, as required by 
paragraph (j) of the supplemental NPRM, does not have a direct 
relationship with the electrical fault or uncommanded dry operation of 
the main tank boost pumps and center auxiliary tank override and 
jettison pumps, and is not a possible source of ignition.
    We acknowledge the commenters' concerns and have removed paragraph 
(j) from this AD. The installation of a dual crossfeed valve system is 
an option that operators may do to improve airplane reliability, or as 
an alternative method of compliance (AMOC) to the requirements of AD 
88-21-03 R1, Amendment 39-6077 (53 FR 46605, November 18, 1988). That 
action (installation of a dual crossfeed configuration) is not 
necessary for the installation of the ground fault interrupter (GFI) or 
to address uncommanded dry operation of the main boost pumps and center 
auxiliary tank override and jettison pumps. This AD requires 
installation of GFI for both single and dual crossfeed valve 
configurations. We agree that a single crossfeed valve configuration is 
acceptable (not incorporating Boeing Service Bulletin 767-28-0034, 
Revision 3, dated March 14, 1996), and we are working with Boeing to 
expedite the revision of Boeing Service Bulletin 767-28A0085 in order 
to provide procedures for a modification to add GFI protection on 
airplanes with single crossfeed valve configurations.
    In addition, we have clarified the actions by revising paragraph 
(g) of this AD to specify the actions for airplanes with a dual 
crossfeed valve configuration and adding paragraph (h) of this AD to 
specify actions for airplanes with a single crossfeed valve 
configuration (i.e., a dual crossfeed valve configuration has not been 
installed in accordance with Boeing Service Bulletin 767-28-0034). For 
airplanes with a dual crossfeed valve configuration, the installation 
specified in Boeing Service Bulletin 767-28A0085, Revision 2, dated 
August 19, 2010, must be done. For airplanes with a single crossfeed 
valve configuration, there are two options: (1) Doing the installation 
specified in Boeing Service Bulletin 767-28A0085, Revision 2, dated 
August 19, 2010, provided that prior to or concurrently with the 
installation of the ground fault interrupt relays, a dual crossfeed 
valve is installed in accordance with Boeing Service Bulletin 767-28-
0034, Revision 3, dated March 14, 1996, or (2) maintaining the single 
crossfeed valve configuration and modifying the airplane to install a 
GFI using a method approved by the FAA. We have revised the subsequent 
paragraph identifiers accordingly.

Requests To Postpone AD Issuance

    All Nippon Airways (ANA), ABX, BAB, and JAL requested that issuance 
of the AD be postponed until Boeing Service Bulletin 767-28A0085, 
Revision 2, dated August 19, 2010, has been revised. ABX noted that 
Boeing Service Bulletin 767-28A0085, Revision 2, dated August 19, 2010, 
contains instructions to modify airplanes with two fuel crossfeed 
valves, but no instructions to modify airplanes with one crossfeed 
valve. The commenters stated that Boeing is in the process of revising 
this service bulletin to change the concurrent requirement and provide 
wiring changes and an alternative installation for airplanes having a 
single crossfeed valve system.
    We do not agree to delay issuance of this AD until Boeing Service 
Bulletin 767-28A0085, Revision 2, dated August 19, 2010, is revised, 
due to the severity of the unsafe condition addressed by this AD. As 
noted previously, paragraph (h) of this AD has been added to provide 
two options for airplanes that currently have a single crossfeed valve 
configuration. Also noted previously, Boeing is currently revising 
Service Bulletin 767-28A0085, and it will be issued after it is 
completed. Therefore, as specified previously, we have changed 
paragraph (g) of this AD and added paragraph (h) of this AD.

Requests To Allow AMOCs to AD 2009-16-06, Amendment 39-15989 (74 FR 
38905, August 5, 2009), To Terminate Paragraph (i) of the Supplemental 
NPRM (76 FR 18664, April 5, 2011)

    Two commenters requested that we allow AMOCs for AD 2009-16-06, 
Amendment 39-15989 (74 FR 38905, August 5, 2009), to terminate the 
requirements of paragraph (i) of the supplemental NPRM (76 FR 18664, 
April 5, 2011). United Airlines (UA) requested that the supplemental 
NPRM include a new paragraph to allow an AMOC to AD 2009-16-06, to 
terminate prior or concurrent installation of an automatic shutoff 
system for the auxiliary fuel tank pump as required by paragraph (i) of 
the supplemental NPRM. UA stated that accomplishing the requirements in 
AD 2009-16-06 terminates the requirements in paragraph (i) of the 
supplemental NPRM, and noted that during compliance with that AD it 
obtained FAA AMOC Letter 140S-09-331, dated September 25, 2009, to 
install an automatic system for the auxiliary fuel tank pump in 
accordance with Boeing Service Bulletin 767-28A0083, Revision 1, dated 
April 26, 2007. That AMOC was only applicable to three of UA's 35 Model 
767-300 airplanes because Boeing Service Bulletin 767-28A0083, Revision 
1, dated April 26, 2007, was accomplished on the remaining 32 airplanes 
before the effective date of AD 2009-16-06. UPS stated that it obtained

[[Page 2444]]

FAA-AMOC 140S-10-218, dated June 22, 2010, which approved the use of 
alternate terminal blocks because those identified in Boeing Service 
Bulletin 767-28A0083, Revision 2, dated February 12, 2009, had been 
superseded. UPS requested that paragraph (i) of the supplemental NPRM 
be updated to include that any approved AMOCs terminate the 
requirements of paragraph (i) of the supplemental NPRM.
    We acknowledge the commenters' concerns and provide the following. 
The related FAA-approved AMOCs should be accepted for terminating the 
requirements of paragraph (j) of this AD (referred to as paragraph (i) 
in the supplemental NPRM (76 FR 18664, April 5, 2011)), because the 
intent of those requirements is met by those AMOCs. It is not necessary 
to add a new paragraph or revise paragraph (j) of this AD, because 
accomplishing the AMOCs to AD 2009-16-06, Amendment 39-15989 (74 FR 
38905, August 5, 2009), meets the requirements of AD 2009-16-06, and 
therefore terminates the requirements of paragraph (j) of this AD. 
Paragraph (j) of this AD already states that ``Accomplishing the 
requirements of AD 2009-16-06, terminates the requirements of this 
paragraph.'' We have made no change to the AD in this regard.

Requests To Revise Paragraph (k) of the Supplemental NPRM (76 FR 18664, 
April 5, 2011)

    UA asked that paragraph (k) of the supplemental NPRM (76 FR 18664, 
April 5, 2011) be revised to add a reference to Revision May 2010 of 
Section 9 of the Boeing 767 Maintenance Planning Data (MPD) Document, 
D622T001-9. UA stated that paragraph (k) requires concurrent revision 
of the maintenance program by incorporating Airworthiness Limitations 
(AWLs) No. 28-AWL-27 and No. 28-AWL-28 of Section 9 of the Boeing 767 
MPD Document, D622T001-9, Revision April 2008; Revision March 2009; or 
Revision May 2009. UA added that subsequent to Revision May 2009, 
Boeing has issued Revision May 2010. UPS also requested that paragraph 
(k) of the supplemental NPRM be revised to add Revision 22, dated April 
2011, of Section 9 of the Boeing 767 MPD, Document D622T001-9.
    We agree that Boeing 767 MPD Document, D622T001-9, Revision May 
2010 should be added to paragraph (k) of this AD. However, we do not 
agree to add Revision 22, dated April 2011. That revision does not 
affect Section 9 of MPD Document D622T001-9, as referred to in 
paragraph (k) of this AD. We have revised paragraph (k) of this AD 
accordingly.

Conclusion

    We reviewed the relevant data, considered the comments received, 
and determined that air safety and the public interest require adopting 
the AD with the changes described previously. We also determined that 
these changes will not increase the economic burden on any operator or 
increase the scope of the AD.

Costs of Compliance

    We estimate that this AD will affect 416 airplanes of U.S. 
registry.
    We estimate the following costs to comply with this AD:

                                                 Estimated Costs
----------------------------------------------------------------------------------------------------------------
                                                                                                 Cost on U.S.
             Action                   Labor cost          Parts cost       Cost per product        operators
----------------------------------------------------------------------------------------------------------------
Installation of GFI equipment     Between 216 and     Between $52,285     Between $70,645     Up to $31,964,608.
 and wiring.                       279 work-hours x    and $53,123.        and $76,838.
                                   $85 per hour =
                                   between $18,360
                                   and $23,715.
Installation of second crossfeed  Between 274 and     Between $30,838     Between $54,128     Between
 valve (prior/concurrent action).  302 work-hours x    and $66,903.        and $92,573.        $22,517,248 and
                                   $85 per hour =                                              $38,510,368.
                                   between $23,290
                                   and $25,670.
Installing automatic shutoff      Between 3 and 29    Between $421 and    Between $676 and    Between $281,216
 system (prior/concurrent          work-hours x $85    $9,374.             $11,839.            and $4,925,024.
 action; required by AD 2009-16-   per hour =
 06, Amendment 39-15989 (74 FR     between $255 and
 38905, August 5, 2009)).          $2,465.
Revising the maintenance program  1.................  None..............  $85...............  $35,360.
----------------------------------------------------------------------------------------------------------------

    According to the manufacturer, some of the costs of this AD may be 
covered under warranty, thereby reducing the cost impact on affected 
individuals. We do not control warranty coverage for affected 
individuals. As a result, we have included all costs in our cost 
estimate.

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, Section 106, describes the 
authority of the FAA Administrator. Subtitle VII, Aviation Programs, 
describes in more detail the scope of the Agency's authority.
    We are issuing this rulemaking under the authority described in 
Subtitle VII, Part A, Subpart III, Section 44701, ``General 
requirements.'' Under that section, Congress charges the FAA with 
promoting safe flight of civil aircraft in air commerce by prescribing 
regulations for practices, methods, and procedures the Administrator 
finds necessary for safety in air commerce. This regulation is within 
the scope of that authority because it addresses an unsafe condition 
that is likely to exist or develop on products identified in this 
rulemaking action.

Regulatory Findings

    We have determined that this AD will not have federalism 
implications under Executive Order 13132. This AD will not have a 
substantial direct effect on the States, on the relationship between 
the national government and the States, or on the distribution of power 
and responsibilities among the various levels of government.
    For the reasons discussed above, I certify that this AD:
    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866,
    (2) Is not a ``significant rule'' under DOT Regulatory Policies and 
Procedures (44 FR 11034, February 26, 1979),

[[Page 2445]]

    (3) Will not affect intrastate aviation in Alaska, and
    (4) Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

Adoption of the Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority:  49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new airworthiness 
directive (AD):

2011-25-05 The Boeing Company: Amendment 39-16881; Docket No. FAA-
2009-1221; Directorate Identifier 2008-NM-097-AD.

(a) Effective Date

    This airworthiness directive (AD) is effective February 22, 
2012.

(b) Affected ADs

    None.

(c) Applicability

    This AD applies to The Boeing Company Model 767-200, -300, -
300F, and -400ER series airplanes, certificated in any category; as 
identified in Boeing Service Bulletin 767-28A0085, Revision 2, dated 
August 19, 2010.

    Note 1:  This AD requires revisions to certain operator 
maintenance documents to include new inspections. Compliance with 
these inspections is required by 14 CFR 91.403(c). For airplanes 
that have been previously modified, altered, or repaired in the 
areas addressed by these inspections, the operator may not be able 
to accomplish the inspections described in the revisions. In this 
situation, to comply with 14 CFR 91.403(c), the operator must 
request approval for an alternative method of compliance (AMOC) 
according to paragraph (o) of this AD. The request should include a 
description of changes to the required inspections that will ensure 
the continued operational safety of the airplane.

(d) Subject

    Joint Aircraft System Component (JASC)/Air Transport Association 
(ATA) of America Code 28, Fuel.

(e) Unsafe Condition

    This AD results from fuel system reviews conducted by the 
manufacturer. We are issuing this AD to prevent possible sources of 
ignition in a fuel tank caused by electrical fault or uncommanded 
dry operation of the main tank boost pumps and center auxiliary tank 
override and jettison pumps. An ignition source in the fuel tank 
could result in a fire or an explosion and consequent loss of the 
airplane.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Installation for Airplanes on Which a Dual Crossfeed Valve Has Been 
Installed

    For airplanes on which a dual crossfeed valve has been installed 
as specified in Boeing Service Bulletin 767-28-0034 as of the 
effective date of this AD: Within 60 months after the effective date 
of this AD, install ground fault interrupt relays (P140 and P141 
panel assemblies) and all applicable parts and components in the 
main equipment center or in the forward cargo compartment sidewall, 
as applicable, and remove the fuel boost pump control relays from 
the P33, P36, and P37 panels, in accordance with the Accomplishment 
Instructions of Boeing Service Bulletin 767-28A0085, Revision 2, 
dated August 19, 2010, except as required by paragraph (i) of this 
AD.

(h) Installation for Airplanes on Which a Dual Crossfeed Valve Has Not 
Been Installed

    For airplanes on which a dual crossfeed valve has not been 
installed as specified in Boeing Service Bulletin 767-28-0034 as of 
the effective date of this AD: Within 60 months after the effective 
date of this AD, do the actions specified in paragraph (h)(1) or 
(h)(2) of this AD.
    (1) Install ground fault interrupt relays (P140 and P141 panel 
assemblies) and all applicable parts and components in the main 
equipment center or in the forward cargo compartment sidewall, as 
applicable, and remove the fuel boost pump control relays from the 
P33, P36, and P37 panels, in accordance with the Accomplishment 
Instructions of Boeing Service Bulletin 767-28A0085, Revision 2, 
dated August 19, 2010, except as required by paragraph (i) of this 
AD. Prior to or concurrently with the installation of the ground 
fault interrupt relays, install a dual crossfeed valve in accordance 
with Boeing Service Bulletin 767-28-0034, Revision 3, dated March 
14, 1996.
    (2) Maintain the single crossfeed valve configuration and 
install a GFI, in accordance with a method approved using the 
procedures specified in paragraph (o)(1) of this AD.

(i) Exception to Service Bulletin

    Although paragraph 3.B.29.e. of the Accomplishment Instructions 
of Boeing Service Bulletin 767-28A0085, Revision 2, dated August 19, 
2010, specifies an alternative functional test of the left and right 
center override pumps as an option, this AD requires that test for 
airplanes on which the center tank is deactivated.

(j) Prior/Concurrent Installations

    For airplanes identified in paragraph 1.A.1. of Boeing Service 
Bulletin 767-28A0083, Revision 2, dated February 12, 2009; or Boeing 
Service Bulletin 767-28A0084, Revision 1, dated April 26, 2007: 
Prior or concurrently with accomplishing the actions required by 
paragraph (g) and (h)(1) of this AD, install an automatic shutoff 
system for the auxiliary fuel tank pump, in accordance with the 
Accomplishment Instructions of Boeing Service Bulletin 767-28A0083, 
Revision 2, dated February 12, 2009; or Boeing Service Bulletin 767-
28A0084, Revision 1, dated April 26, 2007; as applicable. 
Accomplishing the requirements of AD 2009-16-06, Amendment 39-15989 
(74 FR 38905, August 5, 2009), terminates the requirements of this 
paragraph.

(k) Maintenance Program Revision

    Concurrently with accomplishing the actions required by 
paragraphs (g) and (h)(1) of this AD, or within 30 days after the 
effective date of this AD, whichever occurs later: Revise the 
maintenance program by incorporating Airworthiness Limitations 
(AWLs) No. 28-AWL-27 and No. 28-AWL-28 of Section 9 (``Airworthiness 
Limitations (AWLs) and Certification Maintenance Requirements 
(CMRs)'') of the Boeing 767 Maintenance Planning Data (MPD) 
Document, D622T001-9, Revision April 2008; Revision March 2009; 
Revision May 2009; or Revision May 2010. The initial compliance time 
for the actions specified in AWLs No. 28-AWL-27 and No. 28-AWL-28 is 
within 1 year after accomplishing the installation required by 
paragraph (g) or (h)(1) of this AD, or within 1 year after the 
effective date of this AD, whichever occurs later.

(l) Terminating Action for AWLs Revision

    Incorporating AWLs No. 28-AWL-27 and No. 28-AWL-28 into the 
maintenance program in accordance with paragraph (g)(2) of AD 2008-
11-01, Amendment 39-15523 (73 FR 29414, May 21, 2008), or paragraph 
(g)(2) of AD 2008-11-01 R1, Amendment 39-16145 (74 FR 68515, 
December 28, 2009), terminates the action required by paragraph (k) 
of this AD.

(m) No Alternative Inspections or Inspection Intervals

    After accomplishing the actions specified in paragraph (k) of 
this AD, no alternative inspections or inspection intervals may be 
used unless the inspections or intervals are approved as an 
alternative method of compliance (AMOC) in accordance with the 
procedures specified in paragraph (o) of this AD.

(n) Credit for Actions Accomplished in Accordance With Previous Service 
Information

    Actions done before the effective date of this AD in accordance 
with the service information identified in paragraphs (n)(1) through 
(n)(5) of this AD are acceptable for compliance with the 
corresponding requirements of this AD.
    (1) Boeing Alert Service Bulletin 767-28A0085, dated January 10, 
2008.

[[Page 2446]]

    (2) Boeing Service Bulletin 767-28A0085, Revision 1, dated June 
25, 2009.
    (3) Boeing Alert Service Bulletin 767-28A0083, dated May 3, 
2006.
    (4) Boeing Service Bulletin 767-28A0083, Revision 1, dated April 
26, 2007.
    (5) Boeing Alert Service Bulletin 767-28A0084, dated May 3, 
2006.

(o) Alternative Methods of Compliance (AMOCs)

    (1) The Manager, Seattle ACO, FAA, has the authority to approve 
AMOCs for this AD, if requested using the procedures found in 14 CFR 
39.19. In accordance with 14 CFR 39.19, send your request to your 
principal inspector or local Flight Standards District Office, as 
appropriate. If sending information directly to the manager of the 
ACO, send it to the attention of the person identified in the 
Related Information section of this AD. Information may be emailed 
to: 9-ANM-Seattle-ACO-AMOC-Requests@faa.gov.
    (2) Before using any approved AMOC, notify your appropriate 
principal inspector, or lacking a principal inspector, the manager 
of the local flight standards district office/certificate holding 
district office.

(p) Related Information

    For more information about this AD, contact Elias Natsiopoulos, 
Aerospace Engineer, Systems and Equipment Branch, ANM-130S, FAA, 
Seattle Aircraft Certification Office, 1601 Lind Avenue SW., Renton, 
Washington 98057-3356; telephone (425) 917-6478; fax (425) 917-6590; 
email elias.natsiopoulos@faa.gov.

(q) Material Incorporated by Reference

    (1) You must use the following service information to do the 
actions required by this AD, unless the AD specifies otherwise. The 
Director of the Federal Register approved the incorporation by 
reference (IBR) of the following service information under 5 U.S.C. 
552(a) and 1 CFR part 51 on the date specified:
    (i) Boeing Service Bulletin 767-28-0034, Revision 3, dated March 
14, 1996, approved for IBR February 22, 2012.
    (ii) Boeing Service Bulletin 767-28A0083, Revision 2, dated 
February 12, 2009, approved for IBR September 9, 2009 (74 FR 38905, 
August 5, 2009).
    (iii) Boeing Service Bulletin 767-28A0084, Revision 1, dated 
April 26, 2007, approved for IBR September 9, 2009 (74 FR 38905, 
August 5, 2009).
    (iv) Boeing Service Bulletin 767-28A0085, Revision 2, dated 
August 19, 2010, approved for IBR February 22, 2012.
    (v) Section 9 of Boeing 767 Maintenance Planning Data Document, 
D622T001-9, Revision April 2008, approved for IBR January 12, 2010 
(74 FR 68515, December 28, 2009).
    (vi) Section 9 of Boeing 767 Maintenance Planning Data Document, 
D622T001-9, Revision March 2009, approved for IBR February 22, 2012.
    (vii) Section 9 of Boeing 767 Maintenance Planning Data 
Document, D622T001-9, Revision May 2009, approved for IBR January 
12, 2010 (74 FR 68515, December 28, 2009).
    (viii) Section 9 of Boeing 767 Maintenance Planning Data 
Document, D622T001-9, Revision May 2010, approved for IBR February 
22, 2012.
    (2) For service information identified in this AD, contact 
Boeing Commercial Airplanes, Attention: Data & Services Management, 
P.O. Box 3707, MC 2H-65, Seattle, Washington 98124-2207; telephone 
(206) 544-5000, extension 1; fax (206) 766-5680; email 
me.boecom@boeing.com; Internet https://www.myboeingfleet.com.
    (3) You may review copies of the referenced service information 
at the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., 
Renton, Washington. For information on the availability of this 
material at the FAA, call (425) 227-1221.
    (4) You may also review copies of the service information that 
is incorporated by reference at the National Archives and Records 
Administration (NARA). For information on the availability of this 
material at an NARA facility, call (202) 741-6030, or go to http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.

    Issued in Renton, Washington, on November 22, 2011.
Ali Bahrami,
Manager, Transport Airplane Directorate, Aircraft Certification 
Service.
[FR Doc. 2012-468 Filed 1-17-12; 8:45 am]
BILLING CODE 4910-13-P


