
[Federal Register: August 14, 2008 (Volume 73, Number 158)]
[Rules and Regulations]               
[Page 47546-47550]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr14au08-7]                         

-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

40 CFR Part 63

[EPA-R09-OAR-2008-0555; FRL-8701-7]

 
Delegation of National Emission Standards for Hazardous Air 
Pollutants for Source Categories; State of Arizona, Arizona Department 
of Environmental Quality, Pima County Department of Environmental 
Quality

AGENCY: Environmental Protection Agency (EPA).

ACTION: Direct final rule.

-----------------------------------------------------------------------

SUMMARY: EPA is amending certain regulations to reflect the current 
delegation status of national emission standards for hazardous air 
pollutants (NESHAP) in Arizona. Several NESHAP were delegated to the 
Arizona Department of Environmental Quality on June 4, 2008, and to the 
Pima County Department of Environmental Quality on June 16, 2008. The 
purpose of this action is to update the listing in the Code of Federal 
Regulations.

DATES: This rule is effective on October 14, 2008, without further 
notice, unless EPA receives adverse comments by September 15, 2008. If 
we receive such comments, we will publish a timely withdrawal in the 
Federal Register to notify the public that this direct final rule will 
not take effect.

ADDRESSES: Submit comments, identified by docket number EPA-R09-OAR-
2008-0555, by one of the following methods:

[[Page 47547]]

    1. Federal eRulemaking Portal: www.regulations.gov. Follow the on-
line instructions.
    2. E-mail: steckel.andrew@epa.gov.
    3. Mail or delivery: Andrew Steckel (AIR-4), U.S. Environmental 
Protection Agency Region IX, 75 Hawthorne Street, San Francisco, CA 
94105-3901.
    Instructions: All comments will be included in the public docket 
without change and may be made available online at www.regulations.gov, 
including any personal information provided, unless the comment 
includes Confidential Business Information (CBI) or other information 
whose disclosure is restricted by statute. Information that you 
consider CBI or otherwise protected should be clearly identified as 
such and should not be submitted through www.regulations.gov or e-mail. 
www.regulations.gov is an ``anonymous access'' system, and EPA will not 
know your identity or contact information unless you provide it in the 
body of your comment. If you send e-mail directly to EPA, your e-mail 
address will be automatically captured and included as part of the 
public comment. If EPA cannot read your comment due to technical 
difficulties and cannot contact you for clarification, EPA may not be 
able to consider your comment.
    Docket: The index to the docket for this action is available 
electronically at www.regulations.gov and in hard copy at EPA Region 
IX, 75 Hawthorne Street, San Francisco, California. While all documents 
in the docket are listed in the index, some information may be publicly 
available only at the hard copy location (e.g., copyrighted material), 
and some may not be publicly available in either location (e.g., CBI). 
To inspect the hard copy materials, please schedule an appointment 
during normal business hours with the contact listed in the FOR FURTHER 
INFORMATION CONTACT section.

FOR FURTHER INFORMATION CONTACT: Mae Wang, EPA Region IX, (415) 947-
4124, wang.mae@epa.gov.

SUPPLEMENTARY INFORMATION: Throughout this document, ``we,'' ``us'' and 
``our'' refer to EPA.

Table of Contents

I. Background
    A. Delegation of NESHAP
    B. ADEQ Delegations
    C. PDEQ Delegations
II. EPA Action
III. Statutory and Executive Order Reviews

I. Background

A. Delegation of NESHAP

    Section 112(l) of the Clean Air Act, as amended in 1990 (CAA), 
authorizes EPA to delegate to state or local air pollution control 
agencies the authority to implement and enforce the standards set out 
in the Code of Federal Regulations, Title 40 (40 CFR), part 63, 
National Emission Standards for Hazardous Air Pollutants for Source 
Categories. On November 26, 1993, EPA promulgated regulations, codified 
at 40 CFR part 63, Subpart E (hereinafter referred to as ``Subpart 
E''), establishing procedures for EPA's approval of state rules or 
programs under section 112(l) (see 58 FR 62262). Subpart E was later 
amended on September 14, 2000 (see 65 FR 55810).
    Any request for approval under CAA section 112(l) must meet the 
approval criteria in 112(l)(5) and Subpart E. To streamline the 
approval process for future applications, a state or local agency may 
submit a one-time demonstration that it has adequate authorities and 
resources to implement and enforce any CAA section 112 standards. If 
such demonstration is approved, then the state or local agency would no 
longer need to resubmit a demonstration of these same authorities and 
resources for every subsequent request for delegation of CAA section 
112 standards. However, EPA maintains the authority to withdraw its 
approval if the State does not adequately implement or enforce an 
approved rule or program.

B. ADEQ Delegations

    On July 17, 1998, EPA published a direct final action delegating to 
the Arizona Department of Environmental Quality (ADEQ) several NESHAP 
and approving ADEQ's delegation mechanism for future standards (see 63 
FR 38478). That action explained the procedure for EPA to grant 
delegations to ADEQ by letter, with periodic Federal Register listings 
of standards that have been delegated. On April 17, 2008, ADEQ 
requested delegation of the following NESHAP contained in 40 CFR part 
63:
     Subpart DDDD--NESHAP: Plywood and Composite Wood Products
     Subpart DDDDD--NESHAP for Industrial, Commercial, and 
Institutional Boilers and Process Heaters
    On June 4, 2008, EPA granted delegation to ADEQ for these NESHAP, 
along with any amendments to previously-delegated NESHAP, as of July 1, 
2006. Today's action is serving to notify the public of the June 4, 
2008, delegations and to codify these delegations into the Code of 
Federal Regulations.

C. PDEQ Delegations

    On June 28, 1999, EPA published a direct final action delegating to 
the Pima County Department of Environmental Quality (PDEQ) several 
NESHAP and approving PDEQ's delegation mechanism for future standards 
(see 64 FR 34560). That action explained the procedure for EPA to grant 
delegations to PDEQ by letter, with periodic Federal Register listings 
of standards that have been delegated. On May 23, 2008, PDEQ requested 
delegation of the following NESHAP contained in 40 CFR part 63:
     Subpart J--NESHAP for Polyvinyl Chloride and Copolymers 
Production
     Subpart MM--NESHAP for Chemical Recovery Combustion 
Sources at Kraft, Soda, Sulfite, and Stand-Alone Semichemical Pulp 
Mills
     Subpart XX--National Emission Standards for Ethylene 
Manufacturing Process Units: Heat Exchange Systems and Waste Operations
     Subpart DDDD--NESHAP: Plywood and Composite Wood Products
     Subpart WWWWW--National Emission Standards for Hospital 
Ethylene Oxide Sterilizers
     Subpart YYYYY--NESHAP for Area Sources: Electric Arc 
Furnace Steelmaking Facilities
     Subpart ZZZZZ--NESHAP for Iron and Steel Foundries Area 
Sources
     Subpart BBBBBB--NESHAP for Source Category: Gasoline 
Distribution Bulk Terminals, Bulk Plants, and Pipeline Facilities
     Subpart CCCCCC--NESHAP for Source Category: Gasoline 
Dispensing Facilities
     Subpart DDDDDD--NESHAP for Polyvinyl Chloride and 
Copolymers Production Area Sources
     Subpart EEEEEE--NESHAP for Primary Copper Smelting Area 
Sources
     Subpart FFFFFF--NESHAP for Secondary Copper Smelting Area 
Sources
     Subpart GGGGGG--NESHAP for Primary Nonferrous Metals Area 
Sources--Zinc, Cadmium, and Beryllium
     Subpart HHHHHH--NESHAP: Paint Stripping and Miscellaneous 
Surface Coating Operations at Area Sources
     Subpart LLLLLL--NESHAP for Acrylic and Modacrylic Fibers 
Production Area Sources
     Subpart MMMMMM--NESHAP for Carbon Black Production Area 
Sources
     Subpart NNNNNN--NESHAP for Chemical Manufacturing Area 
Sources: Chromium Compounds
     Subpart OOOOOO--NESHAP for Flexible Polyurethane Foam 
Production and Fabrication Area Sources
     Subpart PPPPPP--NESHAP for Lead Acid Battery Manufacturing 
Area Sources
     Subpart QQQQQQ--NESHAP for Wood Preserving Area Sources

[[Page 47548]]

     Subpart RRRRRR--NESHAP for Clay Ceramics Manufacturing 
Area Sources
     Subpart SSSSSS--NESHAP for Glass Manufacturing Area 
Sources
     Subpart TTTTTT--NESHAP for Secondary Nonferrous Metals 
Processing Area Sources
    On June 16, 2008, EPA granted delegation to PDEQ for these NESHAP, 
along with any amendments to previously-delegated NESHAP, as of 
February 1, 2008. Today's action is serving to notify the public of the 
June 16, 2008, delegations and to codify these delegations into the 
Code of Federal Regulations.

II. EPA Action

    Today's document serves to notify the public of the delegation of 
NESHAP to ADEQ on June 4, 2008, and to PDEQ on June 16, 2008. Today's 
action will codify these delegations into the Code of Federal 
Regulations.

III. Statutory and Executive Order Reviews

    Under the Clean Air Act, the Administrator is required to approve a 
delegation request that complies with the provisions of the Act and 
applicable Federal regulations. 42 U.S.C. 7412(l); 40 CFR 63.91(b). 
Thus, in reviewing state delegation submissions, our role is to approve 
state choices, provided that they meet the criteria of the CAA. 
Accordingly, this action merely updates the list of approved 
delegations in the Code of Federal Regulations and does not impose 
additional requirements beyond those imposed by state law. For that 
reason, this action:
     Is not a ``significant regulatory action'' subject to 
review by the Office of Management and Budget under Executive Order 
12866 (58 FR 51735, October 4, 1993);
     Does not impose an information collection burden under the 
provisions of the Paperwork Reduction Act (44 U.S.C. 3501 et seq.);
     Is certified as not having a significant economic impact 
on a substantial number of small entities under the Regulatory 
Flexibility Act (5 U.S.C. 601 et seq.);
     Does not contain any unfunded mandate or significantly or 
uniquely affect small governments, as described in the Unfunded 
Mandates Reform Act of 1995 (Pub. L. 104-4);
     Does not have Federalism implications as specified in 
Executive Order 13132 (64 FR 43255, August 10, 1999);
     Is not an economically significant regulatory action based 
on health or safety risks subject to Executive Order 13045 (62 FR 
19885, April 23, 1997);
     Is not a significant regulatory action subject to 
Executive Order 13211 (66 FR 28355, May 22, 2001);
     Is not subject to requirements of Section 12(d) of the 
National Technology Transfer and Advancement Act of 1995 (15 U.S.C. 272 
note) because application of those requirements would be inconsistent 
with the Clean Air Act; and
     Does not provide EPA with the discretionary authority to 
address, as appropriate, disproportionate human health or environmental 
effects, using practicable and legally permissible methods, under 
Executive Order 12898 (59 FR 7629, February 16, 1994).
    In addition, this rule does not have tribal implications as 
specified by Executive Order 13175 (65 FR 67249, November 9, 2000), 
because the delegation submission is not approved to apply in Indian 
country located in the state, and EPA notes that it will not impose 
substantial direct costs on tribal governments or preempt tribal law.
    The Congressional Review Act, 5 U.S.C. 801 et seq., as added by the 
Small Business Regulatory Enforcement Fairness Act of 1996, generally 
provides that before a rule may take effect, the agency promulgating 
the rule must submit a rule report, which includes a copy of the rule, 
to each House of the Congress and to the Comptroller General of the 
United States. EPA will submit a report containing this action and 
other required information to the U.S. Senate, the U.S. House of 
Representatives, and the Comptroller General of the United States prior 
to publication of the rule in the Federal Register. A major rule cannot 
take effect until 60 days after it is published in the Federal 
Register. This action is not a ``major rule'' as defined by 5 U.S.C. 
804(2).
    Under section 307(b)(1) of the Clean Air Act, petitions for 
judicial review of this action must be filed in the United States Court 
of Appeals for the appropriate circuit by October 14, 2008. Filing a 
petition for reconsideration by the Administrator of this final rule 
does not affect the finality of this action for the purposes of 
judicial review nor does it extend the time within which a petition for 
judicial review may be filed, and shall not postpone the effectiveness 
of such rule or action. This action may not be challenged later in 
proceedings to enforce its requirements (see section 307(b)(2)).

List of Subjects in 40 CFR Part 63

    Environmental protection, Administrative practice and procedure, 
Air pollution control, Hazardous substances, Intergovernmental 
relations, Reporting and recordkeeping requirements.

    Authority: This action is issued under the authority of Section 
112 of the Clean Air Act, as amended, 42 U.S.C. 7412.

    Dated: July 25, 2008.
Amy Zimpfer,
Acting Director, Air Division, Region IX.

0
Title 40, chapter I, part 63 of the Code of Federal Regulations is 
amended as follows:

PART 63--[AMENDED]

0
1. The authority citation for part 63 continues to read as follows:

    Authority: 42 U.S.C. 7401, et seq.

Subpart E--Approval of State Programs and Delegation of Federal 
Authorities

0
2. Section 63.99 is amended by revising paragraph (a)(3) to read as 
follows:


Sec.  63.99  Delegated Federal authorities.

    (a) * * *
    (3) The following table lists the specific part 63 standards that 
have been delegated unchanged to the air pollution control agencies in 
the State of Arizona. The (X) symbol is used to indicate each category 
that has been delegated.

                                Delegation Status for Part 63 Standards--Arizona
----------------------------------------------------------------------------------------------------------------
           Subpart                        Description              ADEQ \1\    MCAQD \2\   PDEQ \3\   PCAQCD \4\
----------------------------------------------------------------------------------------------------------------
A............................  General Provisions...............          X           X           X           X
F............................  Synthetic Organic Chemical                 X           X           X           X
                                Manufacturing Industry.
G............................  Synthetic Organic Chemical                 X           X           X           X
                                Manufacturing Industry: Process
                                Vents, Storage Vessels, Transfer
                                Operations, and Wastewater.
H............................  Organic Hazardous Air Pollutants:          X           X           X           X
                                Equipment Leaks.

[[Page 47549]]


I............................  Organic Hazardous Air Pollutants:          X           X           X           X
                                Certain Processes Subject to the
                                Negotiated Regulation for
                                Equipment Leaks.
J............................  Polyvinyl Chloride and Copolymers          X           X           X   ..........
                                Production.
L............................  Coke Oven Batteries..............          X           X           X           X
M............................  Perchloroethylene Dry Cleaning...          X           X           X           X
N............................  Hard and Decorative Chromium               X           X           X           X
                                Electroplating and Chromium
                                Anodizing Tanks.
O............................  Ethylene Oxide Sterilization               X           X           X           X
                                Facilities.
Q............................  Industrial Process Cooling Towers          X           X           X           X
R............................  Gasoline Distribution Facilities.          X           X           X           X
S............................  Pulp and Paper...................          X           X           X   ..........
T............................  Halogenated Solvent Cleaning.....          X           X           X           X
U............................  Group I Polymers and Resins......          X           X           X           X
W............................  Epoxy Resins Production and Non-           X           X           X           X
                                Nylon Polyamides Production.
X............................  Secondary Lead Smelting..........          X           X           X           X
AA...........................  Phosphoric Acid Manufacturing              X           X           X   ..........
                                Plants.
BB...........................  Phosphate Fertilizers Production           X           X           X   ..........
                                Plants.
CC...........................  Petroleum Refineries.............          X           X           X           X
DD...........................  Off-Site Waste and Recovery                X           X           X           X
                                Operations.
EE...........................  Magnetic Tape Manufacturing                X           X           X           X
                                Operations.
GG...........................  Aerospace Manufacturing and                X           X           X           X
                                Rework Facilities.
HH...........................  Oil and Natural Gas Production             X           X           X   ..........
                                Facilities.
JJ...........................  Wood Furniture Manufacturing               X           X           X           X
                                Operations.
KK...........................  Printing and Publishing Industry.          X           X           X           X
LL...........................  Primary Aluminum Reduction Plants          X   ..........          X   ..........
MM...........................  Chemical Recovery Combustion               X           X           X   ..........
                                Sources at Kraft, Soda, Sulfite,
                                and Stand-Alone Semichemical
                                Pulp Mills.
OO...........................  Tanks--Level 1...................          X           X           X           X
PP...........................  Containers.......................          X           X           X           X
QQ...........................  Surface Impoundments.............          X           X           X           X
RR...........................  Individual Drain Systems.........          X           X           X           X
SS...........................  Closed Vent Systems, Control               X           X           X   ..........
                                Devices, Recovery Devices and
                                Routing to a Fuel Gas System or
                                a Process.
TT...........................  Equipment Leaks--Control Level 1.          X           X           X   ..........
UU...........................  Equipment Leaks--Control Level 2.          X           X           X   ..........
VV...........................  Oil-Water Separators and Organic-          X           X           X           X
                                Water Separators.
WW...........................  Storage Vessels (Tanks)--Control           X           X           X   ..........
                                Level 2.
XX...........................  Ethylene Manufacturing Process             X           X           X   ..........
                                Units: Heat Exchange Systems and
                                Waste Operations.
YY...........................  Generic MACT Standards...........          X           X           X   ..........
CCC..........................  Steel Pickling...................          X           X           X   ..........
DDD..........................  Mineral Wool Production..........          X           X           X   ..........
EEE..........................  Hazardous Waste Combustors.......          X           X           X   ..........
GGG..........................  Pharmaceuticals Production.......          X           X           X   ..........
HHH..........................  Natural Gas Transmission and               X           X           X   ..........
                                Storage Facilities.
III..........................  Flexible Polyurethane Foam                 X           X           X   ..........
                                Production.
JJJ..........................  Group IV Polymers and Resins.....          X           X           X           X
LLL..........................  Portland Cement Manufacturing              X           X           X   ..........
                                Industry.
MMM..........................  Pesticide Active Ingredient                X           X           X   ..........
                                Production.
NNN..........................  Wool Fiberglass Manufacturing....          X           X           X   ..........
OOO..........................  Manufacture of Amino/Phenolic              X           X           X   ..........
                                Resins.
PPP..........................  Polyether Polyols Production.....          X           X           X   ..........
QQQ..........................  Primary Copper Smelting..........          X           X           X   ..........
RRR..........................  Secondary Aluminum Production....          X           X           X   ..........
TTT..........................  Primary Lead Smelting............          X           X           X   ..........
UUU..........................  Petroleum Refineries: Catalytic            X           X           X   ..........
                                Cracking, Catalytic Reforming,
                                and Sulfur Recovery Units.
VVV..........................  Publicly Owned Treatment Works...          X           X           X   ..........
XXX..........................  Ferroalloys Production...........          X           X           X   ..........
AAAA.........................  Municipal Solid Waste Landfills..          X           X           X   ..........
CCCC.........................  Manufacturing of Nutritional               X           X           X   ..........
                                Yeast.
DDDD.........................  Plywood and Composite Wood                 X   ..........          X   ..........
                                Products.
EEEE.........................  Organic Liquids Distribution (non-         X           X           X   ..........
                                gasoline).
FFFF.........................  Miscellaneous Organic Chemical             X           X           X   ..........
                                Manufacturing.
GGGG.........................  Solvent Extraction for Vegetable           X           X           X   ..........
                                Oil Production.
HHHH.........................  Wet-Formed Fiberglass Mat                  X           X           X   ..........
                                Production.
IIII.........................  Surface Coating of Automobiles             X           X   ..........  ..........
                                and Light-Duty Trucks.
JJJJ.........................  Paper and Other Web Coating......          X           X           X   ..........
KKKK.........................  Surface Coating of Metal Cans....          X           X           X   ..........
MMMM.........................  Miscellaneous Metal Parts and              X           X           X   ..........
                                Products.
NNNN.........................  Large Appliances.................          X           X           X   ..........
OOOO.........................  Printing, Coating, and Dyeing of           X           X           X   ..........
                                Fabrics and Other Textiles.

[[Page 47550]]


PPPP.........................  Surface Coating of Plastic Parts           X           X   ..........  ..........
                                and Products.
QQQQ.........................  Wood Building Products...........          X           X           X   ..........
RRRR.........................  Surface Coating of Metal                   X           X           X   ..........
                                Furniture.
SSSS.........................  Surface Coating of Metal Coil....          X           X           X   ..........
TTTT.........................  Leather Finishing Operations.....          X           X           X   ..........
UUUU.........................  Cellulose Products Manufacturing.          X           X           X   ..........
VVVV.........................  Boat Manufacturing...............          X           X           X   ..........
WWWW.........................  Reinforced Plastics Composites             X           X           X   ..........
                                Production.
XXXX.........................  Tire Manufacturing...............          X           X           X   ..........
YYYY.........................  Stationary Combustion Turbines...          X           X           X   ..........
ZZZZ.........................  Stationary Reciprocating Internal          X           X   ..........  ..........
                                Combustion Engines.
AAAAA........................  Lime Manufacturing Plants........          X           X           X   ..........
BBBBB........................  Semiconductor Manufacturing......          X           X           X   ..........
CCCCC........................  Coke Oven: Pushing, Quenching and          X           X           X   ..........
                                Battery Stacks.
DDDDD........................  Industrial, Commercial, and                X   ..........  ..........  ..........
                                Institutional Boiler and Process
                                Heaters.
EEEEE........................  Iron and Steel Foundries.........          X           X           X   ..........
FFFFF........................  Integrated Iron and Steel........          X           X           X   ..........
GGGGG........................  Site Remediation.................          X           X           X   ..........
HHHHH........................  Miscellaneous Coating                      X           X           X   ..........
                                Manufacturing.
IIIII........................  Mercury Emissions from Mercury             X           X           X   ..........
                                Cell Chlor-Alkali Plants.
JJJJJ........................  Brick and Structural Clay                  X           X           X   ..........
                                Products Manufacturing.
KKKKK........................  Clay Ceramics Manufacturing......          X           X           X   ..........
LLLLL........................  Asphalt Roofing and Processing...          X           X           X   ..........
MMMMM........................  Flexible Polyurethane Foam                 X           X           X   ..........
                                Fabrication Operation.
NNNNN........................  Hydrochloric Acid Production.....          X           X           X   ..........
PPPPP........................  Engine Test Cells/Stands.........          X           X           X   ..........
QQQQQ........................  Friction Products Manufacturing..          X           X           X   ..........
RRRRR........................  Taconite Iron Ore Processing.....          X           X           X   ..........
SSSSS........................  Refractory Products Manufacturing          X           X           X   ..........
TTTTT........................  Primary Magnesium Refining.......          X           X           X   ..........
WWWWW........................  Hospital Ethylene Oxide            ..........  ..........          X   ..........
                                Sterilizers.
YYYYY........................  Area Sources: Electric Arc         ..........  ..........          X   ..........
                                Furnace Steelmaking Facilities.
ZZZZZ........................  Iron and Steel Foundries Area      ..........  ..........          X   ..........
                                Sources.
BBBBBB.......................  Gasoline Distribution Bulk         ..........  ..........          X   ..........
                                Terminals, Bulk Plants, and
                                Pipeline Facilities.
CCCCCC.......................  Gasoline Dispensing Facilities...  ..........  ..........          X   ..........
DDDDDD.......................  Polyvinyl Chloride and Copolymers  ..........  ..........          X   ..........
                                Production Area Sources.
EEEEEE.......................  Primary Copper Smelting Area       ..........  ..........          X   ..........
                                Sources.
FFFFFF.......................  Secondary Copper Smelting Area     ..........  ..........          X   ..........
                                Sources.
GGGGGG.......................  Primary Nonferrous Metals Area     ..........  ..........          X   ..........
                                Sources--Zinc, Cadmium, and
                                Beryllium.
HHHHHH.......................  Paint Stripping and Miscellaneous  ..........  ..........          X   ..........
                                Surface Coating Operations at
                                Area Sources.
LLLLLL.......................  Acrylic and Modacrylic Fibers      ..........  ..........          X   ..........
                                Production Area Sources.
MMMMMM.......................  Carbon Black Production Area       ..........  ..........          X   ..........
                                Sources.
NNNNNN.......................  Chemical Manufacturing Area        ..........  ..........          X   ..........
                                Sources: Chromium Compounds.
OOOOOO.......................  Flexible Polyurethane Foam         ..........  ..........          X   ..........
                                Production and Fabrication Area
                                Sources.
PPPPPP.......................  Lead Acid Battery Manufacturing    ..........  ..........          X   ..........
                                Area Sources.
QQQQQQ.......................  Wood Preserving Area Sources.....  ..........  ..........          X   ..........
RRRRRR.......................  Clay Ceramics Manufacturing Area   ..........  ..........          X   ..........
                                Sources.
SSSSSS.......................  Glass Manufacturing Area Sources.  ..........  ..........          X   ..........
TTTTTT.......................  Secondary Nonferrous Metals        ..........  ..........          X   ..........
                                Processing Area Sources.
----------------------------------------------------------------------------------------------------------------
\1\ Arizona Department of Environmental Quality.
\2\ Maricopa County Air Quality Department.
\3\ Pima County Department of Environmental Quality.
\4\ Pinal County Air Quality Control District.

* * * * *
[FR Doc. E8-18748 Filed 8-13-08; 8:45 am]

BILLING CODE 6560-50-P
