United States

Environmental Protection

Agency

date of publication

  FOR REFERENCE WHEN REVIEWING

   THE INFORMATION COLLECTION REQUEST

This version is an update for the Notification of Regulated Waste
Activity. There are some minor changes from the March 2005 version in
the reporting requirements, instructions, and form.

Notification of

Regulated Waste  Activity

Instructions and Form

EPA Form 8700-12

(OMB# 2050-0028; Expires - date as approved from OMB)

Office of Solid Waste

5301W

Washington, DC 20460

Notification of Regulated Waste Activity

Instructions and Form

     Section 3010 of Subtitle C of Resource Conservation and Recovery
Act (RCRA) requires any person who generates, transports, or recycles
regulated wastes or who owns or operates a facility for the treatment,
storage, or disposal of regulated wastes to notify EPA of their
activities, including the location and general description of the
activities and the regulated wastes handled.  Respondents must submit
the information required in the Notification of Regulated Waste Activity
Instructions and Form booklet by completing the RCRA Subtitle C Site
Identification Form [EPA Form 8700-12].  As required by statute, EPA
promulgated regulations to implement these notification requirements at
40 CFR Parts 262,263, 264, 265, 266, 270, 273, and 279.  EPA needs this
information to determine the universe of persons who generate, handle,
and manage these regulated wastes; assign EPA Identification Numbers;
and ensure that these regulated wastes are managed in a way that
protects human health and the environment as required by RCRA.  This is
mandatory reporting by the respondents.

     EPA enters notification information submitted by respondents into
RCRAInfo, the EPA national database, and assigns EPA Identification
Numbers.  EPA uses this information to identify the universe of
regulated waste generators, handlers, and managers and their specific
regulated waste activities.  EPA also uses the information for tracking
and for a variety of enforcement and inspection purposes.  Finally, EPA
uses this information to ensure that regulated waste is managed
properly, that statutory provisions are upheld, and that regulations are
adhered to by facility owners or operators.

     Section 3007(b) of RCRA and 40 CFR Part 2, Subpart B, which defines
EPA's general policy on public disclosure of information, both contain
provisions for confidentiality. However, the Agency does not anticipate
that businesses will assert a claim of confidentiality covering all or
part of the Notification of Regulated Waste Activity.  If such a claim
were asserted, EPA must and will treat the information in accordance
with the regulations cited above.  EPA also will assure that this
information collection complies with the Privacy Act of 1974 and OMB
Circular 108.

     Estimated Burden:  The reporting burden for information collection
requirements associated with initial notification requirements is
estimated to be approximately 2 hours. The burden estimate includes time
for reading the regulations and preparing and submitting the initial
notification.  The reporting burden for information collection
requirements associated with subsequent notification is estimated to be
approximately 1 hour.  The burden estimate includes time for reading the
regulations, preparing and submitting a subsequent notification.

     Send comments on the Agency's need for this information, the
accuracy of the provided burden estimates, and any suggested methods for
minimizing respondent burden, including through the use of automated
collection techniques to the Director, Collection Strategies Division,
U.S. Environmental Protection Agency (2822T), 1200 Pennsylvania Ave.,
NW, Washington, D.C. 20460.  Include the OMB Control Number 2050-0028 in
any correspondence.  Do not send the completed form to this address.

     Also, you can send comments to the Office of Information and
Regulatory Affairs, Office of Management and Budget, 725 17th Street,
NW, Washington, DC 20503, Attention: Desk Office for EPA.  Please
include the OMB Control Number 2050-0028 in any correspondence.



Notification of Regulated Waste Activity

Instructions and Form

This booklet is designed to help you determine if you are subject to
requirements under the Resource Conservation and Recovery Act (RCRA) 
for notifying the U.S. Environmental Protection Agency (EPA) of your
regulated waste activities.  Regulated wastes are hazardous wastes as
defined by 40 CFR Part 261, universal wastes as defined by 40 CFR Part
273, and used oil as defined by 40 CFR Part 279.  The instructions
contained in this booklet will assist you in obtaining an EPA
Identification Number by completing and submitting the RCRA Subtitle C
Site Identification Form (Site Identification Form or Site ID Form) [EPA
Form 8700-12] for Initial Notifications or in revising your Site
Identification Form if you are required to submit a Subsequent
Notification.  RCRA is a Federal law.  If you are regulated but do not
comply with the RCRA notification requirements, you may be subject to
civil penalties.

Large Quantity Handlers of Universal Waste and Used Oil Handlers have
the option of submitting either the Site Identification Form or a letter
to notify EPA of their regulated waste activities, including both
initial and subsequent notifications.  As noted above, the instructions
in this booklet refer only to completing and submitting the RCRA
Subtitle C Site Identification Form.  However, the circumstances under
which these handlers must notify EPA of their regulated waste
activities, the data they must provide, and the procedures they must
follow, as described in this booklet, apply to submitting the Site
Identification Form or a letter.

Note:  Although this booklet contains information and instructions for
completing a Notification of Regulated Waste Activity, it should not be
considered a substitute for the regulations in Title 40 of the Code of
Federal Regulations (40 CFR).  Rather, this booklet serves as a
supplement to the regulations and provides additional information not
contained in 40 CFR.  As a handler of regulated wastes, you are
responsible for learning and complying with all the requirements that
apply to you and your regulated waste activities.

In addition, remember that this booklet and the regulations in 40 CFR
address only the Federal hazardous waste program.  Many States may have
notification requirements that differ from the Federal requirements;
those States may use Site Identification Form or they may use a similar
State form that requires information not requested in the EPA form. 
Again, it is your responsibility to make sure that you have completed
and submitted all forms required under the Federal or your State
program.

We realize that the regulations are complex.  Although we are not
providing reprints of the 40 CFR regulations in this booklet, copies of
the Federal regulations are available from EPA (see below).  We have
listed the addresses and phone numbers of the contacts in each State who
can 

answer your questions and help you understand the Federal and State
requirements that apply to you; these are in the contact list found on
the Internet at:

http://www.epa.gov/epaoswer/hazwaste/data/form8700/forms.htm#links

Click on the document under the section:

Where can I obtain assistance with the Notification of Regulated Waste
Activity  requirements and the RCRA Subtitle C Site Identification Form?
 Where should

I send my completed form?

In addition to those contacts, there are several other sources available
to help with your questions and provide information on EPA regulations:

· 	RCRA Frequently Asked Questions Internet Page.  This allows users to
find answers to commonly asked questions that cover a wide range of RCRA
issues and topics.  Find at:

http://waste.custhelp.com/cgi-bin/waste.cfg/php/enduser/entry.php

· 	RCRA Online.  The RCRA Online database is designed to enable users
to locate documents, including publications and other outreach
materials, that cover a wide range of RCRA issues and topics.  Find at:

http://www.epa.gov/rcraonline/

· 	EPA Internet page for RCRA regulations at:

http://www.epa.gov/docs/epacfr40/chapt-I.info/

· 	Compliance Assistance Centers.  The Environmental Protection Agency
(EPA) has sponsored partnerships with industry, academic institutions,
environmental groups, and other agencies to launch sector-specific
Compliance Assistance Centers (Centers).  Each Center addresses real
world issues in understandable language for you to understand Federal
environmental requirements and how to save money through pollution
prevention techniques.  Visit the Compliance Assistance Centers at: 
http://www.assistancecenters.net

There are several Centers listed; you may find one for your business. 
If not, you may want to review “Do I Need a Hazardous Waste Generator
Identification Number?” and other questions at: 
http://www.transource.org/hazmatz.htm

· 	EPA National Compliance Assistance Clearinghouse.  The Clearinghouse
is a comprehensive source of compliance assistance information and
resources.  Use Internet  links to Federal, State, local, and other
compliance assistance providers to find the tools you need.  Visit the
Clearinghouse at:  http://www.epa.gov/clearinghouse

· 	EPA Small Business Ombudsman Office -- 1-800-368-5888

· 	Your Trade Association

Initial Notifications

If you do not currently have an EPA Identification Number and you handle
regulated waste, you must submit an initial notification.  Please refer
to information contained in Sections 1 through 3 of this booklet to help
you determine whether you handle a regulated waste, whether any
exemptions or exclusions apply to you, and how you should file
Notification of Regulated Waste Activity.  Circumstances under which you
should submit an initial notification include:

1.	If you generate, transport, treat, store, or dispose of hazardous
wastes.  Refer to Section 1 for further information and a description of
exclusions or exemptions; or

2.	If you recycle hazardous wastes. (Recyclable materials are defined as
hazardous wastes that are recycled.)  The recycling process itself is
exempt from regulation, but you must notify EPA and obtain an EPA
Identification Number prior to recycling recyclable materials.  Refer to
Section 1 for further information and a description of exemptions; or 

3.	If you are a large quantity handler of universal waste.  Refer to
Section 2 for further information and a description of exemptions. 
(Notification is required for people who have not previously notified
EPA of their hazardous waste activities or who have not already sent a
notification to EPA as required by 40 CFR Part 273.32); or

4.	If you transport, process, or re-refine used oil; burn
off-specification used oil for energy recovery; or market used oil. 
Refer to Section 3 for further information and for a description of
exemptions.  (Notification is required for people who have not
previously notified EPA of their hazardous waste activities or have not
notified under  40 CFR Part 279 or under 40 CFR Part 266, Subpart E,
which was replaced by 40 CFR Part 279.)  

Subsequent Notifications

Even if you have submitted an initial notification and have received an
EPA Identification Number, you may be required to submit a subsequent
notification.  Please refer to Sections 1 through 3 and 5 of this
booklet for information on when and how to complete a subsequent
notification.  In general, you should submit a subsequent notification
under the following circumstances:

1.	If your business moves to another location; or

2.	If the contact for your site changes; or

3.	If the ownership of your site changes; or

4.	If an additional owner has been added or replaced since you submitted
your initial notification; or 

5.	If the type of regulated waste activity you conduct changes.

Contents of This Booklet

Following is a list of the sections contained in this booklet and the
information covered in those sections:

Section 1.	How to Determine if You Must Notify EPA of Your Hazardous
Waste Activities

Section 2.	How to Determine if You Must Notify EPA of Your Universal
Waste Handling Activities

Section 3.	How to Determine if You Must Notify EPA of Your Used Oil
Management Activities

Section 4.	How to File Notification of Regulated Waste Activity
(Information on how and where to file your form and where you can get
additional information.)

Section 5.	Item-by-item Instructions for Notification of Regulated Waste
Activity Using the RCRA Subtitle C Site Identification Form  (The blank
form is provided at the end of this booklet.)

Section 6.	Definitions (These are provided to help you understand and
complete your  Notification of Regulated Waste Activity.)

Section 7.	EPA Hazardous Waste Numbers for Waste Streams Commonly
Generated

by Small Quantity Generators

Appendix 1- Typical Hazardous Waste Streams Produced by Small Quantity
Generators

Appendix 2- Typical Hazardous Waste Streams and EPA Hazardous Waste
Numbers

RCRA Subtitle C Site Identification Form (Site ID Form) - a copy of the
blank form for filing a  	Notification of Regulated Waste  Activity

After your completed Site ID Form for a notification is received and
processed, you will be sent a written acknowledgment that will include
your EPA Identification Number.  You must use this number on all
communications with EPA regarding your regulated waste activities.

1.	How to Determine if You Must Notify EPA of Your

Hazardous Waste Activities

All persons who generate, transport, recycle, treat, store, or dispose
of hazardous waste are required to notify EPA (or their State agency if
the State is authorized to operate its own hazardous waste program) of
their hazardous waste activities.  These persons must obtain an EPA
Identification Number unless their solid waste has been excluded from
regulation or their hazardous waste has been exempted as outlined below.
 These respective notification requirements are found in 40 CFR Parts
261, 262, 263, 264, 265, and 266.

In addition to the discussion below, you will need to refer to 40 CFR
Part 261 to help you determine if the waste you handle is both a solid
waste and a hazardous waste that is regulated under RCRA.  If you need
help making this determination after reading these instructions, contact
the agency listed for your State in Section 4 of these instructions.

To determine if you handle a solid waste that is also a hazardous waste
and regulated under RCRA, ask yourself the following questions.

A.	Do I Handle a Solid Waste?

40 CFR 261.2 defines "solid waste" as any discarded material that is not
excluded under Part 261.4(a) or that is not excluded by variance granted
under Part 260.30 and 260.31.  A discarded material is any material
which is:

1.	Abandoned, as explained in Part 261.2(b); or

2.	Recycled, as explained in Part 261.2(c); or

3.	Considered inherently waste-like as explained in Part 261.2(d); or

4.	A military munition identified as a solid waste in Part 266.202.

If you do not handle a solid waste, you do not need to notify EPA. 

B.	Has My Solid Waste Been Excluded from the Regulations

under Part 261.4?

The list of general exclusions can be found in 40 CFR 261.4.  If the
solid waste that you handle has been excluded, either by rule or special
variance, then you do not need to notify EPA for that solid waste.  If
your solid waste was not excluded from regulation, you need to determine


if it is a hazardous waste that EPA regulates.  EPA regulates a solid
waste as hazardous waste in two ways:

1.	By specifically listing the solid waste as a hazardous waste and
assigning it a unique EPA Hazardous Waste Code Number; or

2.	By regulating it because it possesses any of four hazardous waste
characteristics and assigning it a generic EPA Hazardous Waste Code
Number.

C.	Is My Solid Waste Specifically Listed as a Hazardous Waste?

Parts 261.30 through 261.33 identify certain solid wastes that EPA has
specifically listed as hazardous.  Persons who handle listed hazardous
waste are subject to regulation and must notify EPA of their hazardous
waste activities unless they are exempted as discussed below.  Refer to
these regulations to see if your solid waste is included as a "listed
hazardous waste."  If you are handling a newly regulated hazardous waste
and have already notified EPA prior to that hazardous waste being
regulated and already have an EPA Identification Number, you do not need
to submit a subsequent notification for that newly regulated hazardous
waste. 

D.	Does My Solid Waste Possess a Hazardous Characteristic?

Even if your solid waste is not specifically listed as a hazardous
waste, it may still be hazardous because it exhibits certain hazardous
characteristics. These characteristics are:

1.	Ignitability;

2.	Corrosivity;

3.	Reactivity; and

4.	Toxicity.

Parts 261.20 through 261.24 explain each of the characteristics and
outline the testing procedures you should use to determine if your solid
waste meets these characteristics.  Persons who handle characteristic
hazardous waste that is regulated must notify EPA of their activities
unless they are exempted, as discussed below.  If you are handling a
newly regulated hazardous waste and have already notified EPA prior to
that hazardous waste being regulated and already have an EPA
Identification Number, you do not need to submit a subsequent
notification for that newly regulated hazardous waste.

E.	Has My Hazardous Waste Been Exempted from the Regulations

under Parts 261.5 and 261.6(a)(3)?

Parts 261.5 and 261.6(a)(3) list certain hazardous wastes that are not
subject to RCRA regulation.  If the hazardous waste that you handle has
been exempted, then you do not need to notify EPA for that hazardous
waste.

2.	How to Determine if You Must Notify EPA of Your Universal Waste
Handling Activities

Under 40 CFR Part 273, Subpart C, Large Quantity Handlers of Universal
Waste who accumulate a total of 5,000 kilograms or more of universal
wastes at any time are required to notify EPA (or their State agency if
the State is authorized to operate its own universal waste program) of
their universal waste activities and obtain an EPA Identification
Number, unless they have previously notified EPA of their hazardous
waste activities.  Large Quantity Handlers of Universal Waste must
notify EPA of their universal waste activities and obtain an EPA
Identification Number before meeting or exceeding the 5,000 kilogram
storage limit.

Small Quantity Handlers of Universal Waste are exempt from these
notification requirements.

Note: Please refer to the regulations in 40 CFR Part 273 to ensure that
you are aware of all the requirements that apply to your universal waste
handling activities.

How to Determine if You Must Notify EPA of Your  Used Oil Management
Activities

Under 40 CFR Part 279, Subparts E, F, G, and H, respectively, persons
who transport used oil; process or re-refine used oil; burn
off-specification used oil for energy recovery; or market used oil fuel,
are required to notify EPA (or their State agency if the State is
authorized to operate its own used oil program) and obtain an EPA
Identification Number, unless they are exempt as outlined below. 
Off-specification used oil may be burned for energy recovery in an
industrial furnace, boiler, or hazardous waste incinerator subject to
regulation under Subpart O of 40 CFR Part 264 or 265.

Used oil transporters; used oil processors/re-refiners;
off-specification used oil burners; and used oil fuel marketers who have
not previously notified EPA of their hazardous waste activities or
notified under 40 CFR Part 266, Subpart E (replaced by Part 279) must
notify EPA to identify their used oil management activities.

Note:  Please refer to the regulations in 40 CFR Part 279 to ensure that
you are aware of all the requirements that apply to your used oil
management activities.

Who is exempt from used oil notification requirements?

A.	Persons who burn on-specification used oil fuel:  Used oil that is to
be burned for energy recovery and that meets the specification provided
under Part 279.11 is exempt from the regulations.  However, the person
who first claims that the used oil meets the specification is subject to
notification as a used oil fuel marketer and certain other 

requirements (see Part 279, Subpart H).  The burner of fuel that meets
the specification in Part 279.11 is not required to notify.

B.	Used oil generators are not required to notify EPA.

C.	Used oil generators operating used oil-fired space heaters:  Persons
who burn only used oil that they generate (or used oil received from
household do-it-yourself used oil changers) in used oil-fired space
heaters are exempt from the notification requirement provided that the
device is vented to the outdoors and the device is not designed to have
a capacity greater than 0.5 million BTU/hour.

4.	How to File Notification of Regulated Waste Activity

Initial Notifications

If you do not currently have an EPA Identification Number and you handle
a regulated waste, you must submit an initial notification for your
regulated waste activities.  Please refer to Sections 1 through 3 of
this booklet for more information on whether you must notify EPA of
these regulated waste activities.  You can satisfy this initial
notification requirement by completing and signing the enclosed RCRA
Subtitle C Site Identification Form (Site Identification Form) [EPA Form
8700-12] and submitting it to the appropriate address (see Section C
below).

Under the Hazardous Waste Import Regulations, 40 CFR Part 262.60,
foreign generators should not apply for an EPA Identification Number. 
These regulations state that when filling out a U.S. manifest, you must
include the name and address of the foreign generator, and the name,
address, and EPA Identification Number of the importer.  Please contact
the U.S. firms involved with your shipments and determine which firm
will serve as the U. S. Importer.

Subsequent Notifications

Even if you have submitted an initial notification and have received an
EPA Identification Number, you may be required to submit a subsequent
notification.  Please refer to information contained in Sections 1
through 3 and Section 5 of this booklet for instructions on when and how
to complete a subsequent notification. 

A.	How Many Forms Should I File?

A person who is subject to the hazardous waste, universal waste, or used
oil management regulations under RCRA should submit one notification
(Site Identification Form) per RCRA site.  If you conduct any regulated
waste activity - hazardous waste, universal waste, or used oil 

management activities - at more than one RCRA site, you must submit a
separate notification using the Site Identification Form for each RCRA
site. 

If you only transport regulated wastes and do not generate, treat,
store, or dispose of hazardous wastes; qualify as a large quantity
handler of universal wastes; or process/re-refine used oil, burn
off-specification used oil fuel, or market used oil fuel, you may submit
one notification that covers all transportation activities your company
conducts.  This  notification should be sent to the appropriate address
(see subsection C below) that serves the State where your company has
its headquarters or principal place of business.  However, if you are a
transporter who also engages in one or more of the regulated waste
activities listed above, you must complete and submit a separate
notification using the Site Identification Form to cover each RCRA site.

B.	Can I Request that this Information Be Kept Confidential?

All information you submit in an initial or subsequent notification can
be released to the public, according to the Freedom of Information Act,
unless it is determined to be confidential by EPA pursuant to 40 CFR
Part 2.  Since notification information is very general, EPA believes it
is unlikely that any information in your notification could qualify to
be protected from release. However, you may make a claim of
confidentiality by printing the word "CONFIDENTIAL" on both sides of
RCRA Subtitle C Site Identification Form and on any attachments.  EPA
will take action on the confidentiality claims in accordance with 40 CFR
Part 2.

C.	Where Should I Send My Completed Form?

We have provided an up to date list of the address for your State Office
where you should send your completed RCRA Subtitle C Site Identification
Form.  Also listed is the phone number you can call for additional
information; in some cases there also is an e-mail address.  This
contact list can be found on the Internet at:

http://www.epa.gov/epaoswer/hazwaste/data/form8700/forms.htm#links

Click on the document under the section:

Where can I obtain assistance with the Notification of Regulated Waste
Activity  requirements and the RCRA Subtitle C Site Identification Form?
 Where Should I Send My Completed Form?

Many States use the form included at the end of this booklet; some also
require additional information.  The other States require that you
complete and submit a state specific form.  The Contact List notes which
form to use; even if you use the included form, you should check with
your state to determine if you need to submit additional information. 
Also, contact your State if you have any questions about your
submission.

5.	Item-by-item Instructions for Notification of Regulated Waste
Activity Using the RCRA Subtitle C

Site Identification Form

Please be sure to review the instructions carefully and complete all
items on the form.  After you have submitted the Site Identification
Form once, your State may allow you to attach a copy of your most
recently submitted form.  If so, circle items numbers for which any
information has changed.  Then enter the new information (also circle
the item numbers) on the Site Identification Form included in this
booklet and provide the required signatures in Item 13 - Certification.

Note:  Be sure to use your most recently submitted form; it may have
been submitted for a Subsequent Notification of Regulated Waste
Activity, the Hazardous Waste Report, or a previous RCRA Hazardous Waste
Part A Permit Application.

Instructions for Filling Out the

 RCRA Subtitle C Site Identification (Site ID) Form

WHO MUST SUBMIT THIS FORM

All sites required to submit any of the following must submit the RCRA
Subtitle C Site Identification (Site ID) Form:

	Initial Notification of Regulated Waste Activity

	Subsequent Notification of Regulated Waste Activity

	First RCRA Hazardous Waste Part A Permit Application

	Revised RCRA Hazardous Waste Part A Permit Application

	Hazardous Waste Report 

You must complete all the items on the Site ID Form.

PURPOSE OF THIS FORM

For purposes of the Notification of Regulated Waste Activity, the Site
ID Form provides site-specific information about a facility for
obtaining an EPA Identification Number and submitting Initial
Notification of Regulated Waste Activity.  For purposes of a Subsequent
Notification of Regulated Waste Activity, the Site ID Form provides
updated site-specific information for those items that have changed at
your site and verifies the information for those items that remain
unchanged.  For the purposes of the RCRA Hazardous Waste Part A Permit
Application and the Hazardous Waste Report, you must also complete the
Site ID Form to update your site information.

HOW TO FILL OUT THIS FORM

Complete all of the Site ID Form items.

	Item 1 -  your reason for submitting the form

	Item 2 -  your site’s EPA Identification Number

	Item 3 -  the name of your site

	Item 4 -  the physical location of your site

Item 5 -  the land type of your site

	Item 6 -  the North American Industry Classification System (NAICS)
code(s) for your site

	Item 7 -  the mailing address for your site

	Item 8 -  name and phone number of a contact person at your site

Item 9 -  names of the operator and the legal owner(s) of your site

Item 10 - your site’s regulated waste activities (enter all that
apply)

Item 11 - the description of hazardous waste if you handle any

Item 12 - additional comments on Items 1 through 11

Item 13 - certification that the information you provided throughout the
form is truthful, accurate and complete

Type or print in black ink all items except the Signature box in Item
13.  Enter your site’s EPA ID Number in the top left-hand corner on
the second and third pages of the form; for Initial Notification for
this site, leave the EPA Identification Number blank.  Use Item 12 -
Comments to clarify or provide additional information for any entry. 
When entering information in the comments section, enter the item number
and box letter to which the comment refers.  If you must use additional
sheets for comments, enter your site’s EPA ID Number in the top
left-hand corner of each sheet.

ITEM-BY-ITEM INSTRUCTIONS

Item 1 -- Reason for Submittal:

Reason for Submittal:  Place an “X” in the appropriate box to
indicate whether this form is your Initial Notification of Regulated
Waste Activity (to obtain an EPA Identification Number); a Subsequent
Notification of Regulated Waste Activity (to update your site
identification information); a component of a First or a Revised
Hazardous Waste Part A Permit Application; or a component of the
Hazardous Waste Report.

	For Initial Notification of Regulated Waste Activity to provide site
identification information and obtain an EPA Identification Number for
hazardous waste, universal waste, or used oil activities.  If your waste
activity is regulated under Subtitle C of the Resource Conservation and
Recovery Act (RCRA) and the rules promulgated pursuant to the Act
(specifically 40 CFR Parts 260–299), you must submit this form to
notify the appropriate State or EPA Regional Office of your regulated
waste activities and obtain an EPA Identification Number.

	For Subsequent Notification of Regulated Waste Activity to update
site identification information.  You must use this form to submit a
subsequent notification if your site already has an EPA Identification
Number and you wish to change information (e.g., generator status, new
site contact person, new owner, new mailing address, new regulated waste
activity, etc.).

	As a component of a First RCRA Hazardous Waste Part A Permit
Application.  If your site is planning to treat, store, or dispose of
hazardous waste on site in a unit that is not exempt from obtaining a
hazardous waste permit, you must submit this form as part of the Part A
Permit Application.  Also, if the activity at this site (treatment,
storage, or disposal) became newly regulated under RCRA Subtitle C and
the rules promulgated pursuant to the Act (specifically 40 CFR Parts
260-299), you must submit this form as part of the Part A Permit
Application.

	As a component of a Revised RCRA Hazardous Waste Part A Permit
Application.  If you must submit a revised Part A Permit Application to
reflect changes that have occurred at your site, you must submit this
form as part of your revised Part A Permit Application.  Examples of
site changes requiring a revised Part A Permit Application include
managing new wastes not identified in the first submission of the form
or changes to existing waste treatment processes.  When submitting a
revised Part A Permit
Applica楴湯‬汰慥敳椠据畬敤琠敨䄠敭摮敭瑮渠浵敢⁲
湩琠敨愠灰潲牰慩整猠慰散മ

	As a component of the Hazardous Waste Report.  If you are required
to submit a Hazardous Waste Report indicating the amount of hazardous
waste you generate, treat, recycle, dispose, ship off site, or receive
from off site, you must fill out this form.

NOTE	

You will report your current Hazardous Waste Generator status as of the
date of submitting the Site Identification Form in Item 10.A.1 - 
Generator of Hazardous Waste.  Your status may have changed since your
last submission (unless this is an Initial Notification of Regulated
Waste Activity).

Item 2 -- Site EPA ID Number:

Provide your EPA Identification Number in Item 2 for this site.  Also,
be sure to include your EPA Identification Number at the top of pages 2
and 3 of the form (as well as on any attachments to the Site ID Form).

NOTE	

If this is your Initial Notification for this site, leave the EPA
Identification Number blank and proceed to Item 3.



Items 3 and 4 -- Site Name and Location:

Provide the legal name of your site and a complete location address. 
Please note that the address you give for Item 4, Site Location, must
be a physical address, not a post office box or route number.

NOTE	

A new EPA Identification Number is required if you change the location
of your site.



Item 5 -- Site Land Type:

Place an “X” in the box that best describes the land type of your
site.  Select only one type: Private, County, District, Federal, Indian
(see Indian Country below), Municipal, State, or Other.  If your
site’s Land Type could be described as Municipal and as County, as
District, or as Indian, do not mark Municipal.  Instead choose the other
appropriate code; you may explain this in Item 12 - Comments.

Indian Country - Land governed by an entity on the list of Federally
recognized American Indian tribes and Alaskan Native entities at:
http://www.epa.gov/edr/fdetribal.pdf

Item 6 -- North American Industry Classification System (NAICS) Code(s):

Box A must be completed.  Completing Boxes B-D is recommended, if
applicable.

Box A		Provide the North American Industry Classification System (NAICS)
code that best describes your site’s primary business production
process for your products or services.  Use the six (6) digit code (most
specific description) if available for your business; if not, use the
five (5) digit code; do not enter any four (4) or less digit code.

Boxes B - D	List other NAICS codes that describe the primary business
production processes for your site.  Use the 6 or 5 digit codes that
apply to your site.

Check with your accounting or business staff to determine your NAICS
code(s); the NAICS code is used in tax reporting and other business
reports.  A list of the acceptable codes is on the Internet at - 

http://www.epa.gov/epaoswer/hazwaste/data/br03/forms.htm

You can obtain additional information about NAICS codes from the
Internet at - http://www.census.gov/epcd/naics02/

Item 7 -- Site Mailing Address:

Please enter the Site Mailing Address.  If the mailing address and the
Location of Site (Item 4) are the same, you can enter “Same as Item
4” in the box for Item 7.

Item 8 -- Site Contact Person:

Enter the name, business telephone number, and extension of the
individual who should be contacted regarding the information submitted
in the Site ID Form.  You may also enter an email address; if you want
to be contacted by fax, enter that number in Item 12 - Comments.  A
Subsequent Notification is recommended when the Site Contact Person
changes.  Do not enter other contact persons here; if there are other
persons who may be contacted about this submission, list them and their
other contact information in Item 12.  An example would be a contact
specifically for the Hazardous Waste Report.  Note that the Facility
Permit Contact information for the RCRA Hazardous Waste Part A Permit
Application is entered in Items 1 and 2 of the Hazardous Waste Permit
Information Form.

NOTE	

It is assumed that the Site Contact Person will receive mail at the Site
Mailing Address provided in Item 7.  If this is not the case, please
provide the mailing address for the Site Contact Person in Item 12 -
Comments.



Item 9 -- Operator and Legal Owner of the Site:

This section should be used to indicate all the operators and owners of
this site.  Please review these definitions:

Operator - The person responsible for the overall operation of a RCRA
site.  Note:  This is the legal entity which controls the RCRA site
operation rather than the plant or site manager.  This is usually a
company or business name, not an individual.  See Person.

Owner - The person who owns a RCRA site or part of a RCRA site.  Note:
This includes the property owner.  This may be an individual, company,
or business name.  See Person.

Person - An individual, trust, firm, joint stock company, Federal
Agency, corporation (including a government corporation), partnership,
association, State, municipality, commission, political subdivision of a
State, or any interstate body.

A.	Name of Site’s Operator:  Provide the name of your site’s
operator.

Date Became an Operator:  Indicate the date on which the above entity
became the operator of your site.  Enter dates as in this example:  For
April 22, 2005, enter 04/22/2005.

Operator Type: Place an “X” in the box that best describes the
operator type of your site.  Select only one type: Private, County,
District, Federal, Indian (see below), Municipal, State, or Other.  If
your site’s Operator Type  could be described as Municipal and as
County, as District, or as Indian, do not mark Municipal.  Instead
choose the other appropriate code; you may explain this in Item 12 -
Comments.

Indian - A member of an entity on the list of Federally recognized
American Indian tribes and Alaskan Native entities at:
http://www.epa.gov/edr/fdetribal.pdf

Use the Comments section in Item 12 to list any additional operators,
their names, the dates they became operators, operator type, and mailing
address.  If necessary, attach a separate sheet of paper.

B.	Name of Site’s Legal Owner:  Provide the name of your site’s
legal owner(s).  This includes owner(s) of the building(s) and land.

Date Became an Owner:  Indicate the date on which the above entity
became the owner of your site.  Enter dates as in this example:  For
April 22, 2005, enter 04/22/2005.

Owner Type:  Place an “X” in the box that best describes the owner
type of your site.  Select only one type: Private, County, District,
Federal, Indian (see below), Municipal, State, or Other.  If your
site’s Owner Type could be described as Municipal and as County, as
District, or as Indian, do not mark Municipal.  Instead choose the other
appropriate code; you may explain this in

Item 12 - Comments.

Indian - A member of an entity on the list of Federally recognized
American Indian tribes and Alaskan Native entities at:
http://www.epa.gov/edr/fdetribal.pdf

Use the Comments section in Item 12 to list any additional owners, their
names, the dates they became owners, owner type, mailing address, and
which owner(s), if any, are no longer owners since your last submission
of this form.  If necessary, attach a separate sheet of paper.

Legal Owner Address:  Please enter this information if your State
requires it; see your State’s specific instructions if any.  If the
address and the Location of Site (Item 4) are the same, you can enter
“Same as Item 4” in the box for Item 9.

NOTE	

A subsequent notification is recommended when the operator or owner of a
site changes.  Because an EPA Identification Number is site-specific,
the new owner will keep the existing EPA Identification Number for that
location.  If your business moves to another location, the operator or
owner must notify the State or EPA Regional Office of this change. 
Since your business has changed locations, a new EPA Identification
Number will be assigned.

Item 10 -- Type of Regulated Waste Activity

                  Place an “X” in box “Yes” or in box “No”
as appropriate for activities at this site;

                  complete any additional boxes as instructed.

A.	Hazardous Waste Activities:  Complete all parts 1 through 6.

NOTE	

Listed below are the Federal generator status definitions.  If, however,
the State where your site is located has definitions different from the
Federal definitions, you must use the State definitions.



1.	Generator of Hazardous Waste:  If you generate a hazardous waste that
is listed in 40 CFR 261.31 through 261.33 or identified by one or more
hazardous waste characteristic(s) contained in 40 CFR 261.21 through
261.24, place an “X” in the appropriate box for the quantity of
non-acutely hazardous waste that is generated per calendar month.  The
regulations for hazardous waste generators are found in 40 CFR Part 262.
 Consult these regulations and your State for details about how the
regulations apply to your situation.  Below is a brief description of
the three types of hazardous waste generators.

If “Yes”, mark only one of the following - a, b, or c.

a.  LQG: Large Quantity Generator

This site is a Large Quantity Generator if the site meets any of the
following criteria:

i)	Generates, in any calendar month, 1,000 kg (2,200 lbs.) or more of
RCRA hazardous waste; or

ii)	Generates, in any calendar month, or accumulates at any time, more
than 1 kg (2.2 lbs.) of RCRA acute hazardous waste; or

iii)	Generates, in any calendar month, or accumulates at any time, more
than 100 kg (220 lbs.) of spill cleanup material contaminated with RCRA
acute hazardous waste.

NOTE	

If, in addition to being an LQG, you recycle hazardous wastes at your
site, mark both this box and Box A.4 below.

b.  SQG: Small Quantity Generator

This site is a Small Quantity Generator if the site meets all of the
following criteria:

i)	Generates, in any calendar month, more than 100 kg (220 lbs.) but
less than 1,000 kg (2,200 lbs.) of RCRA hazardous waste; and

ii)	Generates, in any calendar month, or accumulates at any time, no
more than 1 kg (2.2 lbs.) of acute hazardous waste and no more than 100
kg (220 lbs.) of material from the cleanup of a spill of acute hazardous
waste.

OR, the site is a Small Quantity Generator if the site:

i)	Meets all other criteria for a Conditionally Exempt Small Quantity
Generator (see below), but 

ii)	Accumulates, at any time, more than 1,000 kg (2,200 lbs.) of RCRA
hazardous waste.

c.  CESQG: Conditionally Exempt Small Quantity Generator

This site is a CESQG if the site does all of the following:

i)	Generates no more than 100 kg (220 lbs.) of RCRA hazardous waste in
any calendar month; and

ii)	Accumulates, at any time, no more than 1,000 kg (2,200 lbs.) of RCRA
hazardous waste; and

iii) 	Generates, in any calendar month, or accumulates at any time, no
more than 1 kg (2.2 lbs.) of acute hazardous waste, and no more than 100
kg (220 lbs.) of material from the cleanup of a spill of acute hazardous
waste.

NOTE	

If you generate acutely hazardous wastes listed in 40 CFR 261.31, 261.32
or 261.33(e), please refer to 40 CFR 261.5(e) to determine the
circumstances under which you must notify the EPA.



In addition to the above, mark “Yes” or “No” for the other
hazardous waste activities listed below that may occur at this site. 
Complete 1.d and e, and 2 through 6.

d.  United States Importer of Hazardous Waste

Mark “Yes” if you import hazardous waste from a foreign country into
the United States.  Refer to 40 CFR 262.60 for additional information.

e.  Mixed Waste Generator

Mark “Yes” if you are a generator of mixed waste (waste that is both
hazardous and radioactive).  RCRA defines “mixed waste” as waste
that contains both hazardous waste and source, special nuclear, or
by-product material subject to the Atomic Energy Act (AEA), RCRA section
1004(41), 42 U.S.C. 6903 (63 FR 17414; April 9, 1998).  See the
definitions on pages 39, 42, and 43.

2.	Transporter of Hazardous Waste: Mark “Yes” if you transport
hazardous waste within the United States.  The Federal regulations for
hazardous waste transporters are found in 40 CFR Part 263.

3.	Treater, Storer, or Disposer of Hazardous Waste:  If you treat,
store, or dispose of hazardous waste, mark “Yes”.  A RCRA Hazardous
Waste Permit is required for this activity.  Contact the appropriate
office for your State for more information. The Federal regulations for
operators and owners of permitted treatment, storage, and disposal
facilities (TSDFs) are found in 40 CFR Parts 264, 265, 266, and 270.

NOTE	

If your site is a destination facility for universal wastes in addition
to being a treatment, storage, or disposal facility for other RCRA
hazardous wastes, mark both this box and Box B.2 below.



4.	Recycler of Hazardous Waste: If you recycle regulated hazardous
wastes (recyclable materials), mark “Yes”.  The Federal regulations
for operators and owners of sites that recycle hazardous waste are found
in 40 CFR 261.6.  You also may be subject to other Federal and State
regulations; in some cases a permit is required.

NOTE	

If your site, in addition to being a recycling site for hazardous waste,
is a treater, storer, or disposer of hazardous waste, mark both this box
and Box A.3 above.  If your site is a destination facility for universal
wastes in addition to being a recycling site for other RCRA hazardous
wastes, mark both this box and Box B.2 below.



5.	Exempt Boiler and/or Industrial Furnace:

If you mark “Yes”, mark each that applies.

a.  If you burn small quantities of hazardous waste in an on-site boiler
or industrial furnace in accordance with the conditions in 40 CFR
266.108, mark “Yes” to indicate that you qualify for the Small
Quantity On-Site Burner Exemption.

b.  If you process hazardous wastes in a smelting, melting, or refining
furnace solely for metals recovery, as described in 40 CFR 266.100(d),
or to recover economically significant amounts of precious metals, as
described in 40 CFR 266.100(g), or if you process hazardous wastes in a
lead recovery furnace to recover lead, as described in 40 CFR
266.100(h), place an “X” in the box to indicate that you qualify for
the Smelting, Melting, and Refining Furnace Exemption.

6.	Underground Injection Control: If you generate, treat, store, or
dispose of hazardous waste and there is an underground injection well
located at your site, mark “Yes”.  The Federal regulations for
operators or owners of underground injection wells are found in 40 CFR
Part 148.

In addition to the above, mark “Yes” or “No” for the other
regulated waste activities listed below that may occur at this site. 
Complete Items B and C.

B.	Universal Waste Activities:  Refer to your State-specific
requirements and definitions for universal waste.  Also, refer to 40 CFR
261.9 and 40 CFR Part 273 for the Federal regulations covering universal
waste.  Complete 1 and 2.

1.	Large Quantity Handler of Universal Waste (LQHUW): You are an LQHUW
if you accumulate a total of 5,000 kg or more of any universal wastes
(calculated collectively) at any time.  If “Yes”, place an “X”
in the appropriate box(es) to indicate the type(s) of universal wastes
you generate at your site.  If your State has additional universal
wastes, indicate what they are and place an “X” in the corresponding
box(es).

2.	Destination Facility: Mark “Yes” if you treat, dispose of, or
recycle universal wastes on site.  A hazardous waste permit is required
if you treat or dispose of universal wastes; a permit may be required if
you recycle universal wastes.  

NOTE	

If your site, in addition to being a destination facility for universal
wastes, is also a treatment, storage, or disposal facility for RCRA
hazardous wastes, mark both this box and Box A.3 above.  In addition, if
your site recycles RCRA hazardous wastes, mark both this box and Box A.4
above.



C.	Used Oil Activities: Mark the appropriate box(es) to indicate which
used oil management activities are taking place at this site.  The
Federal regulations for used oil management are found in 40 CFR Part
279.  Complete 1 through 4.

1.	Used Oil Transporter:  If you transport used oil and/or own or
operate a used oil transfer facility, mark “Yes” and place an
“X” in the appropriate box(es) to indicate this used oil management
activity.

2.	Used Oil Processor/Re-Refiner:  If you process and/or re-refine used
oil, mark “Yes” and place an “X” in the appropriate box(es) to
indicate this used oil management activity.

3.	Off-Specification Used Oil Burner:  If you burn off-specification
used oil fuel, mark “Yes” to indicate this used oil management
activity.

4.	Used Oil Fuel Marketer: Mark “Yes” if you market used oil fuel. 
If you market off-specification used oil directly to a burner, place an
“X” in Box 4.a.  If you are the first to claim the used oil meets
the used oil specification established in 40 CFR 279.11, place an
“X” in Box 4.b.  If either of these boxes is marked, you also must
notify (or have previously notified) as a used oil transporter, used oil
processor/re-refiner, or off-specification used oil fuel burner, unless
you are a used oil generator. (Used oil generators are not required to
notify.)

Item 11 -- Description of Hazardous Wastes:

Complete this item if you marked “Yes” for any activity in Item 10.
A. and if your State requires it.  You will need to refer to 40 CFR Part
261 to complete this item.  Part 261 identifies those solid wastes which
the EPA defines as hazardous and regulates under RCRA.  If you need help
completing this section, please contact your State Office.  

A.	Federally Regulated Hazardous Wastes:  If you handle hazardous wastes
that are described in 40 CFR Part 261, enter the appropriate 4-digit
code(s) in the box(es) provided.

NOTE	

EPA Hazardous Waste Codes.  If you handle more hazardous wastes than
will fit under Item 11.A., please continue listing the hazardous waste
codes on an extra sheet.   If you handle a large number of codes, you
may copy the list in this booklet and mark the ones that you handle. 
Attach any additional sheets to the Site Identification Form.



B.	State-Regulated Hazardous Wastes:  If you manage State-regulated
hazardous wastes that have a state waste code, enter the appropriate
code(s) in the box(es) provided.

Item 12 -- Comments:

Use this section as needed to provide additional information for Items 1
through 11.  Include the item number and box letter (if any) for each
comment you make.  You may attach additional sheets if needed. 

Item 13 -- Certification:

This certification must be signed by operator(s), owner(s), or
authorized representative(s) of the site.  An “authorized
representative” is a person responsible for the overall operation of
the site (i.e., a plant manager or superintendent, or a person of equal
responsibility).  For the RCRA Hazardous Waste Part A Permit
Application, all operator(s) and owner(s) of the site must sign (see 40
CFR 270. 10 (b) and 270.11).

NOTE	

All Site ID Form submissions must include this certification to be
complete.

 

6.	Definitions

The following definitions are included to help you to understand and
complete the RCRA

Subtitle C Site Identification Form:

Accumulation:  See 40 CFR 262.34.  A site that does not hold RCRA
Interim Status or a RCRA permit may accumulate hazardous waste for a
short period of time before shipping it off site.  The waste must be
accumulated in either tanks or containers; it may not be accumulated in
surface impoundments.

Generators of more than 1,000 kg (2,200 lbs) of hazardous waste per
month may accumulate their waste for up to 90 days before shipping it
off site.  Generators of 100 kg (220 lbs) to 1,000 kg (2,200 lbs) of
hazardous waste per month may accumulate their waste for up to 180 days
before shipping it off site.  If the nearest treatment, storage,
disposal, or recycling facility to which they can send their waste is
more than 200 miles away, they may accumulate their waste for 270 days. 

Act or RCRA means the Solid Waste Disposal Act, as amended by the
Resource Conservation and Recovery Act of 1976, as amended by the
Hazardous and Solid Waste Amendments of 1984,

42 U.S.C. Section 6901 et seq.

Acute Hazardous Waste means any hazardous waste with an EPA hazardous
waste code beginning with the letter “P” (40 CFR 261.33(e)) or any
of the following “F” codes:  F020, F021, F022, F023, F026, and F027
(40 CFR 261.31).  These wastes are subject to stringent quantity
standards for accumulation and generation (40 CFR 261.5(e)).

Authorized Representative means the person responsible for the overall
operation of the RCRA site or an operational unit (i.e., part of a RCRA
site), e.g., superintendent or plant manager, or person of equivalent
responsibility.

Authorized State means a State that has obtained authorization from the
EPA to direct its own RCRA 	program.

Boiler means an enclosed device using controlled flame combustion and
having the following characteristics:

1.	The unit has physical provisions for recovering and exporting energy
in the form of steam, heated fluids, or heated gases;

2.	The unit's combustion chamber and primary energy recovery section(s)
are of integral design (i.e., they are physically formed into one
manufactured or assembled unit);

3.	The unit continuously maintains an energy recovery efficiency of at
least 60 percent, calculated in terms of the recovered energy compared
with the thermal value of the fuel;

4.	The unit exports and utilizes at least 75 percent of the recovered
energy, calculated on an annual basis (excluding recovered heat used
internally in the same unit, for example, to preheat fuel or combustion
air or drive fans or feedwater pumps); or

5.	The unit is one which the Regional Administrator has determined, on a
case-by-case basis, to be a boiler, after considering the standards in
40 CFR 260.32.

By-product Material means material that is a by-product material is (1)
any radioactive material (except special nuclear material) yielded in or
made radioactive by exposure to the radiation incident to the process of
producing or utilizing special nuclear material; and (2) the tailings or
wastes produced by the extraction or concentration of uranium or thorium
from any ore processed primarily for its source material content
(defined in the Atomic Energy Act of 1954).

Code of Federal Regulations (CFR) means the codification of the general
and permanent rules published in the Federal Register by the Executive
departments and agencies of the Federal Government.  The Code is divided
into 50 titles which represent broad areas subject to Federal
regulation.  Each title is divided into chapters that usually bear the
name of the issuing agency.  Each chapter is further subdivided into
parts covering specific regulatory areas.  The CFR title applicable for
the Hazardous Waste Report is “40,” as in “40 CFR 262.34.”

Conditionally Exempt Small Quantity Generator (CESQG) of Hazardous Waste
means a generator that meets the following criteria:

In every month during the year, the site did all of the following:

1.	Generated no more than 100 kg (220 lbs.) of RCRA hazardous waste in a
calendar month; and

2.	Generated, in a calendar month, or accumulated at any time, no more
than 1 kg (2.2 lbs.) of acute hazardous waste, and no more than 100 kg
(220 lbs.) of material from the cleanup of a spill of acute hazardous
waste; and

3.    Accumulated, at any time, no more than 1,000 kg (2,200 lbs.) of
hazardous waste.

Confidential Business Information (CBI) means information a site does
not wish to make available to the general public for competitive
business reasons.  Confidential Business Information (CBI) may be
claimed for certain information in your report.  A claim may be made in
accordance with 40 CFR Part 2, Subpart B.

Delisted Wastes means a site-specific wastes excluded from regulation
under 40 CFR 260.20 and 260.22.  A waste at a particular generating site
may be excluded by petitioning the EPA Administrator for a regulatory
amendment.  These wastes are listed in Appendix IX of 40 CFR Part 261.

Disposal means the discharge, deposit, injection, dumping, spilling,
leaking, or placing of any solid waste or hazardous waste into or on any
land or water so that such solid waste or hazardous waste or any
constituent thereof may enter the environment or be emitted into the air
or discharged into any waters, including ground waters.

Environmental Protection Agency (EPA), also called U.S. EPA, means the
United States Environmental Protection Agency.  Some State environmental
authorities may be called the EPA also, as in “Illinois EPA.” 

EPA Identification (ID) Number means the number assigned by the EPA to
each hazardous waste generator, hazardous waste transporter, and
treatment, storage, or disposal facility; United States importer of
hazardous waste; mixed waste (hazardous and radioactive) generator;
recycler of hazardous waste; exempt boiler and/or industrial furnace
burning or processing hazardous waste; large quantity handler of or
destination facility for universal wastes; disposer of hazardous waste
with an underground injection permit; used oil transporter, used oil
processor/re-refiner, off-specification used oil fuel burner, used oil
fuel marketer; or site undergoing corrective action.

Excluded Wastes means wastes excluded from the definition of solid or
hazardous waste under

40 CFR 261.3 and 261.4.

Hazardous Waste means a hazardous waste as defined in 40 CFR 261.3.

Hazardous Waste Generator means any person, by site, whose act or
process produces hazardous waste identified or listed in 40 CFR Part
261.

Hazardous Waste Number or Code, EPA, means the number (or code) assigned
by the EPA to each hazardous waste listed in 40 CFR Part 261, Subpart D
and to each characteristic identified in 40 CFR Part 261, Subpart C. 
The codes consist of one letter (D, F, P, U, or K) and three numbers.

Hazardous Waste Storage means the holding of hazardous waste for a
temporary period, at the end of which the hazardous waste is treated,
disposed of, or stored elsewhere.

Hazardous Waste Transporter means a person engaged in the off-site
transportation of hazardous waste by air, rail, highway, or water.

Hazardous Waste Treatment means any method, technique, or process,
including neutralization, designed to change the physical, chemical, or
biological character or composition of any hazardous waste so as to
neutralize such hazardous waste, or so as to recover energy or material
resources from the hazardous waste, or so as to render such hazardous
waste nonhazardous, or less hazardous; safer to transport, store or
dispose of; or amenable for recovery, amenable for storage, or reduced
in volume. Such term includes any activity or processing designed to
change the physical form or composition of hazardous waste so as to
render it nonhazardous. 

Incineration means the burning of certain types of solid, liquid, or
gaseous materials; or a treatment technology involving destruction of
waste by controlled burning at high temperatures (e.g., burning sludge
to remove the water and reduce the remaining residues to a safe,
non-burnable ash that can be disposed safely on land, in some waters, or
in underground locations).

Industrial Furnace means any of the following enclosed devices that are
integral components of manufacturing processes and that use thermal
treatment to accomplish recovery of materials or

energy: cement kilns; lime kilns; aggregate kilns; phosphate kilns; coke
ovens; blast furnaces; smelting, melting and refining furnaces; titanium
dioxide chloride process oxidation reactors; methane reforming furnaces;
pulping liquor recovery furnaces; combustion devices used in the
recovery of sulfur values from spent sulfuric acid; halogen acid
furnaces, as defined under industrial furnace in 40 CFR 260.10; and such
other devices as the Administrator may add to this list.

Interim (Permit) Status means the period during which the
operator/owner of an existing TSD facility is  treated as having been
issued a RCRA permit even though he/she has not yet received a final
determination.  An existing facility should have automatically qualified
for interim status if the operator/owner filed both timely
“notification” and the first part (Part A) of the RCRA permit
application.  Interim status continues until a final determination is
made to issue or deny the permit.  Operator/owner of new facilities
cannot by definition qualify for interim status; rather, they need a
RCRA permit prior to beginning construction of a hazardous waste
management facility.

Large Quantity Generator (LQG) of Hazardous Waste means a generator that
meets any of the following criteria:

1.	Generates, in a calendar month, 1,000 kg (2,200 lbs.) or more of RCRA
hazardous waste, during one or more months in a year; or

2.	Generates, in a calendar month, or accumulates at any time, more than
1 kg (2.2 lbs.) of RCRA acute hazardous waste; or

3.	Generates, in a calendar month, or accumulates at any time, more than
100 kg (220 lbs.) of spill cleanup material contaminated with RCRA acute
hazardous waste.

Large Quantity Handler of Universal Waste means a universal waste
handler (as defined in 40 CFR 273.6) who accumulates 5,000 kilograms or
more total of universal waste (batteries, pesticides, or thermostats,
collectively) at any time.  This designation is retained through the end
of the calendar year in which 5,000 kilograms or more of universal
wastes are accumulated.

Management or Hazardous Waste Management means the systematic control of
the collection, source separation, storage, transportation, processing,
treatment, recovery, or disposal of hazardous waste (40 CFR 260.10).

Manifest, Uniform Hazardous Waste, means the shipping document EPA form
8700-22 and, if necessary, Form 8700-22A, originated and signed by a
generator in accordance with the instructions included in the appendix
to 40 CFR Part 262.  The “cradle-to-grave” paperwork must accompany
a shipment of hazardous waste as it moves from the generator to the
transporter and eventually to the hazardous waste management facility.

Mixed Waste means a waste that contains both hazardous and source,
special nuclear, or by-product material subject to the Atomic Energy Act
(AEA), RCRA section 1004(41), 42 U.S.C. 6903 (63 FR 17414; April 9,
1998).

Municipality means a city, village, town, borough, county, parish,
district, association, Indian tribe or authorized Indian tribal
organization, designated and approved management agency under Section
208 of the Clean Water Act, or any other public body created by or under
State law and having jurisdiction over disposal of sewage, industrial
wastes, or other wastes.

Off-Specification Used Oil Burner means a RCRA site where used oil not
meeting the specification requirements in 40 CFR 279.11
(off-specification used oil) is burned for energy recovery in devices
identified in Section 279.61(a).

Off-Specification Used Oil Fuel means used oil fuel that does not meet
the specification provided under

40 CFR 279.11.

On-Specification Used Oil Fuel means used oil fuel that meets the
specification provided under

40 CFR 279.11.

Off-site Facility means a hazardous waste treatment, storage, disposal,
or recycling area located at a place away from the generating site.

On-site Facility means a hazardous waste treatment, storage, disposal,
or recycling area located on the generating site.

Operator means the person responsible for the overall operation of a
RCRA site.  Note:  This is the legal entity which controls the RCRA site
operation rather than the plant or site manager. This is usually a
company or business name, not an individual.  See Person.

Owner means a person who owns a RCRA site or part of a site.  Note: This
includes the property owner.  This may be an individual, company, or
business name.  See Person.

Person means an individual, trust, firm, joint stock company, Federal
Agency, corporation (including a government corporation), partnership,
association, State, municipality, commission, political subdivision of a
State, or any interstate body. 

Resource Conservation and Recovery Act (RCRA) means the Solid Waste
Disposal Act as amended by the Resource Conservation and Recovery Act
(RCRA) (40 CFR 270.2).  It is the Federal statute that regulates the
generation, treatment, storage, disposal, recycling, and/or
transportation of solid and hazardous waste.

RCRA Interim (Permit) Status - Refer to “Interim (Permit) Status.”

RCRA Permit means a complete RCRA permit is comprised of an operating
permit for hazardous waste treatment, storage, and disposal, and a
corrective action permit addressing releases from solid waste management
unit (SWMUs).  To apply for a permit, a site must file a two-part
application (Part A and Part B).  A facility is not considered to have a
complete RCRA permit until both parts have been issued.

RCRA Subtitle C Site (RCRA Site or Site) means the physical plant or
location at which one or more of the following regulated waste
activities occurs: the generation, transportation, treatment, storage,
or disposal of hazardous wastes; recycling of hazardous wastes; United
States importer of hazardous waste; mixed waste (hazardous and
radioactive) generator; exempt boiler and/or industrial furnace burning
or processing hazardous waste; large quantity handler of or destination
facility for universal wastes; disposing hazardous waste with an
underground injection permit; the transportation (and temporary storage
during transportation), processing/re-refining, burning, or marketing of
used oil; or undergoing corrective action.

A site may consist of several treatment, storage, or disposal
operational units.  For entities that only transport regulated wastes,
the term site refers to the headquarters of that entity’s operations.

Recycling means the use, reuse, or reclamation of a material (40 CFR
261.1(c)(7)).  “Reclamation” is the processing or regeneration of a
material to recover a usable product (e.g., recovery of lead values from
spent batteries, regeneration of spent solvents) (40 CFR 261.1(c)(4)). 
A material is “used or reused” if it is either:  (1) employed as an
ingredient (including use as an intermediate) in an industrial process
to make a product (e.g., distillation bottoms from one process used as
feedstock in another process) (40 CFR 261.1(c)(5)).  However, a material
will not satisfy this condition if distinct components of the material
are recovered as separate end products (as when metals are recovered
from metal-containing secondary materials); or (2) employed in a
particular function or application as an effective substitute for a
commercial product (e.g., spent pickle liquor used as phosphorous
precipitant and sludge conditioner in wastewater treatment).

Small Quantity Generator (SQG) of Hazardous Waste means a generator that
meets all the following criteria:

1.	Generates, in a calendar month, more than 100 kg (220 lbs.) but less
than 1,000 kg (2,200 lbs.) of RCRA hazardous waste, during one or more
months in a year; and

2.	Generates, in a calendar month, or accumulates at any time, no more
than 1 kg (2.2 lbs.) of acute hazardous waste and no more than 100 kg
(220 lbs.) of material from the cleanup of a spill of acute hazardous
waste.

OR, your site is a Small Quantity Generator if the site:

1.	Meets all other criteria for a Conditionally Exempt Small Quantity
Generator, but 

2.	Accumulates, at any time, more than 1,000 kg (2,200 lbs.) of
hazardous waste.

Small Quantity On-Site Burner Exemption means that persons who burn
small quantities of hazardous waste in an on-site boiler or industrial
furnace, in accordance with 40 CFR 266.108, are conditionally exempt
from regulation for that activity.

Smelting, Melting, and Refining Furnace Exemption means that: owners or
operators of smelting, melting, and refining furnaces that process
hazardous waste solely for metal recovery are conditionally exempt from
regulation, except for 40 CFR 266.101 and 266.112, provided they comply
with the requirements in Section 266.100(d);  owners or operators of
smelting, melting and refining furnaces that process hazardous waste for
recovery of precious metals are conditionally exempt from regulation,
except for 40 CFR 266.112, provided they comply with the requirements in
Section 266.100(g); and owners or operators of  lead recovery furnaces
that process hazardous waste for recovery of lead and that are subject
to regulation under the Secondary Lead Smelting NESHAP are conditionally
exempt from regulation, except for 40 CFR 266.101, provided they comply
with the requirements in Section 266.100(h).

Solid Waste means any garbage, refuse, or sludge, or other materials not
excluded under 40 CFR 261.4(a).  Exclusions include, for example,
domestic sewage and any mixture of other wastes that pass through a
sewer system to a publicly owned treatment works (POTWs); industrial
wastewater discharges that are point source discharges subject to
regulation under the Clean Water Act; irrigation return flows; nuclear
materials defined by the Atomic Energy Act; and in situ mining materials
(see also page 33).  Wastewaters being collected, stored, or treated
before discharge and sludges generated by wastewater treatment are not
excluded.  The EPA defines hazardous waste as a subset of solid waste.

Source Material that material as defined by the Atomic Energy Act of
1954:  (1) Uranium, thorium, or any other material determined by the
Commission pursuant to the provisions of Section 2091 of this title to
be source material; or (2) ores containing one or more of the foregoing
materials in such concentration as the Commission may by regulation
determine from time to time.

Special Nuclear Material means that materia as defined by the Atomic
Energy Act of 1954:  (1) plutonium, uranium enriched in the isotope 233
or in the isotope 235, and any other material which the Commission,
pursuant to the provisions of Section 2071 of this title, determines to
be special nuclear material, but does not include source material; or
(2) any material artificially enriched by any of the foregoing, but does
not include source material.

Transfer Facility means any transportation-related facility including
loading docks, parking areas, storage areas, and other similar areas
where shipments of hazardous waste are held during the normal course of
transportation (40 CFR 260.10).

Underground Injection Control means the subsurface emplacement of fluids
through a bored, drilled or driven well; or through a dug well, where
the depth of the dug well is greater than the largest surface dimension.
 Underground injection wells are regulated under both the Safe Drinking
Water Act and the Resource Conservation and Recovery Act (see 40 CFR
Part 148).  

United States Importer means any person who imports hazardous waste from
a foreign country into the United States.  This does not include
hazardous waste shipped from a foreign Department of Defense site,
Maquiladora, United States territory or protectorate.

Universal Waste means any of the following hazardous wastes that are
managed under the universal  	waste requirements of 40 CFR Part 273:
batteries, pesticides, thermostats, and lamps.

Used Oil means any oil that has been refined from crude oil, or any
synthetic oil, that has been used, and as a result of such use, is
contaminated by physical or chemical impurities.

Used Oil Fuel Marketer means any person who conducts either of the
following activities:

1.	Directs a shipment of off-specification used oil from their RCRA site
to an off-specification used oil burner; or

2.	First claims that used oil that is to be burned for energy recovery
meets the used oil fuel specifications set forth in 40 CFR 279.11.

Used Oil Management Activities, for the purposes of the Site
Identification Form, include used oil

transportation; used oil processing and re-refining; burning
off-specification used oil fuel; and used oil fuel marketing.

Used Oil Processing means chemical or physical operations designed to
produce from used oil, or to make used oil more amenable for production
of, fuel oils, lubricants, or other used oil-derived products. 
Processing includes, but is not limited to:  blending used oil with
virgin petroleum products, blending used oils to meet the fuel
specification, filtration, simple distillation, chemical or physical
separation, and re-refining.

Used Oil Processor means a RCRA site that processes on- or
off-specification used oil.

Used Oil Re-Refiner means a RCRA site that produces lubricating oils and
greases, industrial fuel, asphalt extender, gasoline, and other products
from on- or off-specification used oil.

Used Oil Transfer Facility means any transportation-related facility,
including loading docks, parking areas, storage areas, and other areas
where shipments of used oil are held for more than 24 hours during the
normal course of transportation and not longer than 35 days.  Transfer
facilities that store used oil for more than 35 days are subject to
regulation under 40 CFR Part 279, Subpart F.

Used Oil Transporter means any person who transports used oil, any
person who collects used oil from more than one generator and transports
the collected oil, and owners and operators of used oil transfer
facilities.  Used oil transporters may consolidate or aggregate loads of
used oil for purposes of transportation but, with the following
exception, may not process used oil.  Used oil transporters may conduct
incidental processing operations that occur in the normal course of used
oil transportation (e.g., settling and water separation), but that are
not designed to produce (or make more amenable for production of) used
oil-derived products or used oil fuel.

7.	EPA Hazardous Waste Numbers for Waste Streams Commonly Generated by
Small Quantity Generators

EPA recognizes that generators of small quantities of hazardous waste,
many of which are small businesses, may not be familiar with the manner
in which hazardous waste materials are identified in the Code of Federal
Regulations.  In order to aid small quantity generators in determining
the EPA Hazardous Waste Numbers for their hazardous wastes that are
needed to complete EPA Form 8700-12, two appendices are enclosed.

Appendix 1 lists 18 general industry categories that contain small
quantity generators. For each of these categories, commonly generated
hazardous wastes are identified. Appendix 2 lists EPA Hazardous Waste
Numbers for each hazardous waste stream identified in Appendix 1.

To use these appendices:

1.	Locate your industry in Appendix 1 to identify the hazardous waste
streams common to your activities.

2.	Find each of your hazardous waste streams in Appendix 2, and review
the more detailed descriptions of typical hazardous wastes to determine
which hazardous waste streams actually result from your activities.

3.	If you determine that a hazardous waste stream does apply to you,
report the 4-digit EPA Hazardous Waste Number in Item 11 of EPA Form
8700-12.

The industries and hazardous waste streams described here do not provide
a comprehensive list but rather serve as a guide to potential small
quantity generators in determining which of their solid wastes, if any,
are hazardous. Except for the pesticide category, this insert does not
include EPA Hazardous Waste Numbers for commercial chemical products
that are hazardous when discarded unused. These chemicals and their EPA
Hazardous Waste Numbers are listed in 40 CFR 261.33.

If the specific Hazardous Waste Number that should be applied to your
hazardous waste stream is unclear, please refer to 40 CFR Part 261. 
Copies of Part 261 and other EPA regulations in 40 CFR are available at
most libraries and on EPA’s Internet page at:

http://www.epa.gov/docs/epacfr40/chapt-I.info/

In those cases where more than one Hazardous Waste Number is applicable,
all should be used. If you have any questions, or if you are unable to
determine the proper EPA Hazardous Waste Numbers for your hazardous
wastes, contact your State Office (see page 2).

Appendix 1

Typical Hazardous Waste Streams Produced by Small Quantity Generators

LABORATORIES

Acids/Bases, Heavy Metals/Inorganics, 

Ignitable Wastes, Reactives, Solvents

PRINTING AND ALLIED INDUSTRIES

Acids/Bases, Heavy Metals/Inorganics, 

Ink Sludges, Spent Plating Wastes, Solvents

PESTICIDE END USERS AND APPLICATION

Heavy Metals/Inorganics, Services, Pesticides, Solvents

CONSTRUCTION

Acids/Bases, Ignitable Wastes, Solvents

EQUIPMENT REPAIR

Acids/Bases, Ignitable Wastes, 

Lead Acid Batteries, Solvents

FURNITURE/WOOD MANUFACTURING & REFINISHING

Ignitable Wastes, Solvents

OTHER MANUFACTURING (textiles, plastics, leather)

Heavy Metals/Inorganics, Solvents

LAUNDRIES AND DRY CLEANERS

Dry Cleaning Filtration Residues, 

Solvents

EDUCATIONAL AND VOCATIONAL SHOPS

Acids/Bases, Ignitable Wastes, Pesticides, 

Reactives, Solvents

BUILDING CLEANING AND MAINTENANCE

Acids/Bases, Solvents

VEHICLE MAINTENANCE

Acids/Bases, Heavy Metals/Inorganics, 

Ignitable Wastes, Lead Acid Batteries, Solvents

WOOD PRESERVING

Preserving Agents

MOTOR FREIGHT TERMINALS AND RAILROAD

Acids/Bases, Transportation, Heavy Metals/Inorganics, Ignitable Wastes, 

Lead Acid Batteries, Solvents

FUNERAL SERVICES

Solvents (formaldehyde)

METAL MANUFACTURING

Acids/Bases, Cyanide Wastes, Heavy Metals/Inorganics, Ignitable Wastes, 

Reactives, Solvents, Spent Plating Wastes

CHEMICAL MANUFACTURERS

Acids/Bases, Cyanide Wastes, Heavy Metals/Inorganics, Ignitable Wastes, 

Reactives, Solvents

CLEANING AGENTS AND COSMETICS

Acids/Bases, Heavy Metals/Inorganics, 

Ignitable Wastes, Pesticides, Solvents

FORMULATORS

Acids/Bases, Cyanide Wastes, Heavy Metals/Inorganics, Ignitable Wastes,
Pesticides, Reactives, Solvents

Appendix 2

Typical Hazardous Waste Streams and EPA Hazardous Waste Numbers

ACIDS/BASES:

Acids, bases or mixtures having a pH less than or equal to 2 or greater
than or equal to 12.5, and liquids that corrode steel at a rate greater
than 0.25 inches per year are considered to be corrosive (for a complete
description of corrosive wastes, see 40 CFR 261.22, Characteristic of
Corrosivity).  All corrosive materials and solutions have the EPA
Hazardous Waste Number D002. The following are some examples of the more
commonly used corrosives:

Examples of Corrosive Waste Streams



Acetic Acid

Ammonium Hydroxide

Chromic Acid

Hydrobromic Acid

Hydrochloric Acid

Hydrofluoric Acid

Nitric Acid	

Oleum

Perchloric Acid

Phosphoric Acid

Potassium Hydroxide

Sodium Hydroxide

Sulfuric Acid



DRY CLEANING FILTRATION RESIDUES:

Cooked powder residue (perchloroethylene plants only), still residues,
and spent cartridge filters containing perchloroethylene or valclene are
hazardous and have an EPA Hazardous Waste Number of F002.  Still
residues containing petroleum solvents with a flash point less than
140F are also considered hazardous and have an EPA Hazardous Waste
Number of D001.

HEAVY METALS/INORGANICS:

 ADVANCE \d7 Heavy Metals and other inorganic waste materials exhibit
the characteristic of TCLP Toxicity and are considered hazardous if the
extract from a representative sample of the waste has any of the
specific constituent concentrations as shown in 40 CFR 261.24, Table 1. 
This may include dusts, solutions, wastewater treatment sludges, paint
wastes, waste inks, and other such materials which contain heavy
metals/inorganics (note that wastewater treatment sludges from
electroplating operations containing nickel and cyanide are identified
as F006).  The following are TCLP Toxic:

Waste Stream	

EPA Hazardous Waste Number



Arsenic

Barium

Cadmium

Chromium

Lead

Mercury

Selenium

Silver	

D004

D005

D006

D007

D008

D009

D010

D011



IGNITABLE WASTES:

F (for a complete description of ignitable wastes see 40 CFR 261.21,
Characteristic of Ignitability).  Examples

are spent solvents (see also solvents), solvent still bottoms, ignitable
paint wastes (paint removers, brush cleaners, and stripping agents),
epoxy resins, and adhesives (epoxies, rubber cements, and marine glues),
and waste inks containing flammable solvents.  Unless otherwise
specified, all ignitable wastes have an EPA Hazardous Waste Number of
D001.

Some commonly used ignitable compounds are:

Waste Stream	

EPA Hazardous Waste Number



Acetone

Benzene

n-Butyl Alcohol

Chlorobenzene

Cychlohexanone

Ethyl Acetate

Ethylbenzene

Ethyl Ether

Ethylene Dichloride

Methanol

Methyl Isobutyl-Ketone

Petroleum Distillates

Xylene	

F003

D001

F003

F002

F003

F003

F003

F003

D001

F003

F003

D001

F003



INK SLUDGES CONTAINING CHROMIUM AND LEAD:

This includes solvent washes and sludges, caustic washes and sludges,
and water washes and sludges from cleaning tubs, and equipment used in
the formulation of ink from pigments, driers, soaps, and stabilizers
containing chromium and lead.  All ink sludges have an EPA Hazardous
Waste Number of K086.

LEAD ACID BATTERIES:

Used lead acid batteries should be reported on the notification form
only if they are not recycled.  Used lead acid batteries that are
recycled do not need to be counted in determining the quantity of waste
that you generate per month, nor do they require a hazardous waste
manifest when shipped off your premises.  (Note:  Special requirements
do apply if you recycle your batteries on your own premises -- see 40
CFR 266.80.)

Waste Stream	

EPA Hazardous Waste Number



Lead Dross

Spent Acids

Lead Acid Batteries	

D008

D002

D008, D002



ORGANIC WASTES:

See 40 CFR 261.24, Table 1 - Maximum Concentration of Contaminants for
the Toxicity Characteristic for a list of constituents and regulatory
levels.

PESTICIDES:

Pesticides, pesticide residues, washing and rinsing solutions, and dips
which contain constituent concentrations at or above Toxicity
Characteristic regulatory levels (see 40 CFR 261.24) are hazardous
waste.  Pesticides that have an oral LD50 toxicity (rat) < 50 mg/kg,
inhalation LC50 toxicity (rat) < 2 mg/L, or a dermal LD 50 toxicity
(rabbit) < 200 mg/kg are hazardous materials.  The following pesticides
would be hazardous waste if they are technical grade, unused, and
disposed.  For a more complete listing, see 40 CFR 261.32-33 for
specific listed pesticides, discarded commercial chemical products, and
other wastes, wastewaters, sludges, and by-products from pesticide
production.

(Note that while many of these pesticides are no longer in common use,
they are included here for those cases where they may be found in
storage.)

Waste Stream	

EPA Hazardous Waste Number



Aldicarb

Aldrin

Amitrole

Arsenic Pentoxide

Arsenic Trioxide

Cacodylic Acid

Carbamic Acid, Methylnitroso-Ethyl Ester

Chlordane

Copper Cyanides

1,2-Dibromo-3-Chloropropane

1,2-Dichloropropane

1,3-Dichloropropene

2,4-Dichlorophenoxy Acetic Acid

DDT

Dieldrin

Dimethoate

Dimethylcarbamoyl Chloride

Dinitrocresol

Dinoseb

Disodium Monmomethane arsonate

Disulfoton

Endosulfan

Endrin

Ethylmercuric Chloride

Famphur

Nepthachlor

Hexachlorobenzene

Kepone

Lindane

2-Methoxy Mercuric Chloride

Methoxychlor

Methyl Parathion

Monosodium Methanearsonate

Nicotine

Parathion

Pentachloronitrobenzene

Pentachlorophenol 

Phenylmercuir Acetate

Phorate

Strychnine

Thallium Sulfate

Thiram

Toxaphene

Warfarin	

P070

P004

U011

P011

P012

U136

U178

U036

P029

U066

U083

U084

U240

U061

P037

P044

U097

P047

P020

D004

P039

P050

P051

D009

P097

P059

U127

U142

U129

D009

D014

P071

D004

P075

P089

U185

U242

D009

P094

P108

P115

U244

P123

U248

REACTIVES:

Reactive wastes include reactive materials or mixtures which are
unstable, react violently with or form explosive mixtures with water,
generate toxic gases or vapors when mixed with water (or when exposed to
pH conditions between 2 and 12.5 in the case of cyanide- or
sulfide-bearing wastes), or are capable of detonation or explosive
reaction when irritated or heated (for a complete description of
reactive wastes, see 40 CFR 261.23, Characteristic of Reactivity). 
Unless otherwise specified, all reactive wastes have an EPA Hazardous
Waste Number of D003. The following materials are commonly considered to
be reactive:

Waste Stream	

EPA Hazardous Waste Number



Acetyl Chloride

Chromic Acid

Cyanides

Organic Peroxides

Perchlorates

Permanganates

Hypochlorites

Sulfides	

D003

D003

D003

D003

D003

D003

D003

D003



SOLVENTS:

Spent solvents, solvent still bottoms, and mixtures containing solvents
are often hazardous.  This includes solvents used in degreasing and
paint-brush cleaning and the distillation residues from reclamation. The
following are some commonly used hazardous solvents (see also Ignitable
Wastes for other hazardous solvents and 40 CFR 261.31 for most listed
hazardous waste solvents):

Waste Stream	

EPA Hazardous Waste Number



Benzene

Carbon Disulfide

Carbon Tetrachloride

Chlorobenzene

Cresols

Cresylic Acid

O-Dichlorobenzene

Ethanol

Ethylene Dichloride

Isobutanol

Isopropanol

Kerosene

Methyl Ethyl Ketone

Methylene Chloride

Naphtha

Nitrobenzene

Petroleum Solvents

F)

Pyridine

1, 1, 1-Trichloroethane

Tetrachloroethylene

Toluene

Trichloroethylene

Trichlorofluoromethane

Trichlorotrifluoroethane

White Spirits	

D001

F005

F001

F002

F004

F004

F002

D001

D001

F005

D001

D001

F005

F001 (Sludges), F002 (Still Bottoms)

D001

F004

D001

F005

F001 (Sludges), F002 (Still Bottoms)

F001 (Sludges), F002 (Still Bottoms)

F005

F001 (Sludges), F002 (Still Bottoms)

F002

F002

D001

SPENT PLATING AND CYANIDE WASTES:

Spent plating wastes contain cleaning solutions and plating solutions
with caustics, solvents, heavy metals, and cyanides.  Cyanide wastes may
also be generated from heat treatment operations, pigment production, or
manufacturing of anti-caking agents.  Plating wastes are generally
Hazardous Waste Numbers F006-F009.  Heat treatment wastes are generally
Hazardous Waste Numbers F010-F012.  See 40 CFR 261.31 for a more
complete description of plating wastes.

WOOD PRESERVING AGENTS:

Compounds or mixtures used in wood preserving, including the wastewater
treatment sludge from wastewater treatment operations, are considered
hazardous wastes.  Bottom sediment sludges from the treatment of
wastewater from wood preserving processes that use creosote or
pentachlorophenol are hazardous and have an EPA Hazardous Waste Number
of K001.  In addition, wastewaters, process residuals, preservative
drippage, and spent formulations from certain wood preserving processes
are also hazardous wastes and carry EPA Hazardous Waste Numbers F032,
F034, or F035, depending on the contaminants they contain.  Unless
otherwise indicated, specific wood preserving components are as follows:

Waste Stream	

EPA Hazardous Waste Number(s)



Chromated Copper Arsenate

Creosote

Pentachlorophenol	

D004, F035

K001, F034

K001, F032



RCRA Subtitle C Site Identification Form

Read all instructions before completing the form.

THIS PAGE INTENTIONALLY LEFT BLANK

	OMB#:  2050-0028   Expires XX/XX/XXXX 

SEND COMPLETED FORM  TO:

The Appropriate State or EPA Regional Office.	

United States Environmental Protection Agency

RCRA SUBTITLE C SITE IDENTIFICATION FORM	





1.  Reason for

     Submittal

     (See instructions

      on page 13.)

  

   MARK ALL BOX(ES)

   THAT APPLY	

Reason for Submittal:

	To provide Initial Notification of Regulated Waste Activity (to
obtain an EPA ID Number for hazardous waste, universal waste, or used
oil activities)

	To provide Subsequent Notification of Regulated Waste Activity (to
update site identification information)

	As a component of a First RCRA Hazardous Waste Part A Permit
Application

	As a component of a Revised RCRA Hazardous Waste Part A Permit
Application (Amendment #______)

	As a component of the Hazardous Waste Report



2.  Site EPA ID

 Number (page 14)	

EPA ID Number

   I___I___I___I I___I___I___I I___I___I___I I___I___I___I



3.  Site Name 

 (page 14)	

Name:



4.  Site Location

     Information

     (page 14)	

Street Address:

	

City, Town, or Village:	

State:

	

County Name:	

Zip Code:



5.  Site Land Type

     (page 14)	

 Private    County    District    Federal    Indian   
Municipal    State    Other



6.  North American

     Industry

     Classification

     System (NAICS)

     Code(s) for the Site        (page 14)	

A.

I___I___I___I___I___I___I	

B.

I___I___I___I___I___I___I

	

C.

I___I___I___I___I___I___I	

D.

I___I___I___I___I___I___I



7.  Site Mailing

     Address

     (page 15)	

Street or P. O. Box:

	

City, Town, or Village:

	

State:

	

Country:	

Zip Code: 



8.  Site Contact

     Person

     (page 15)	

First Name:	

MI:	

Last Name:

	

Phone Number:									Extension:	

Email address: 



9.  Operator and

     Legal Owner

     of the Site

     (pages 15 and 16)

	

A.	Name of Site's Operator:

	

Date Became Operator (mm/dd/yyyy):

	

 Private    County    District    Federal    Indian   
Municipal    State    Other

	

B.	Name of Site's Legal Owner:

	

Date Became Owner (mm/dd/yyyy):

	

Owner Type:       Private    County    District    Federal  
 Indian    Municipal    State    Other



  EPA Form 8700-12 (Revised XX/XXXX)	Page 1 of 3     

THIS PAGE INTENTIONALLY LEFT BLANK

EPA ID NO: I___I___I___I I___I___I___I I___I___I___I I___I___I___I
OMB#:  2050-0028   Expires XX/XX/XXXX

9.  Legal Owner

 (Continued)

 Address	

Street or P. O. Box:

	

City, Town, or Village:

	

State:

	

Country:	

Zip Code: 



10. 	Type of Regulated Waste Activity

Mark “Yes” or “No” for all activities; complete any additional
boxes as instructed.  (See instructions on pages 17 to 20.)



A.  Hazardous Waste Activities

 Complete all parts for 1 through 6.	





 N   1.	Generator of Hazardous Waste   

         If “Yes”, choose only one of the following - a, b, or c.

      	   a. LQG:  Greater than 1,000 kg/mo (2,200 lbs./mo.)

of non-acute hazardous waste; or

     	   b. SQG:  100 to 1,000 kg/mo (220 - 2,200 lbs./mo.)

 	of non-acute hazardous waste; or

      	   c. CESQG:  Less than 100 kg/mo (220 lbs./mo.)

 	of non-acute hazardous waste

      In addition, indicate other generator activities.

         	Y  N  d. United States Importer of Hazardous Waste

         	Y  N  e. Mixed Waste (hazardous and radioactive)
Generator	

Y  N   2.	Transporter of Hazardous Waste

Y  N   3.	Treater, Storer, or Disposer of Hazardous Waste (at your
site)  Note: A hazardous waste permit is required for this activity.

Y  N   4.	Recycler of Hazardous Waste (at your site)

Y  N   5.	Exempt Boiler and/or Industrial Furnace

If “Yes”, mark each that applies.

  a.  Small Quantity On-site Burner

  Exemption

  b.  Smelting, Melting, and Refining 								  Furnace Exemption

Y  N   6.	Underground Injection Control



B.  Universal Waste Activities

Y  N  1.	Large Quantity Handler of Universal Waste (accumulate

5,000 kg or more) [refer to  your State regulations to

determine what is regulated].  Indicate types of universal 						waste
generated and/or accumulated at your site.   If “Yes”,

mark all boxes that apply:

       Generate    

      a.  Batteries															  

      b.  Pesticides															  

      c.  Mercury containing equipment      						  

      d.  Lamps																  

      e.  Other (specify) ________________						  

      f.   Other (specify) ________________						  

      g.  Other (specify) ________________						  

Y  N  2.  	Destination Facility for Universal Waste

  Note: A hazardous waste permit may be required for this activity.	

C.  Used Oil Activities

 Mark all boxes that apply.

Y  N  1.  Used Oil Transporter

                    If “Yes”, mark each that applies.

         a. Transporter

         b. Transfer Facility

Y  N  2.  Used Oil Processor and/or Re-refiner

                    If “Yes”, mark each that applies.               
 		  	     a. Processor

   	     b. Re-refiner

Y  N  3.  Off-Specification Used Oil Burner

Y  N  4.  Used Oil Fuel Marketer

                	   If “Yes”, mark each that applies.

   	     a. Marketer Who Directs Shipment of

Off-Specification Used Oil to

Off-Specification Used Oil Burner

  	     b. Marketer Who First Claims the 

Used Oil Meets the Specifications

  EPA Form 8700-12 (Revised XX/XXXX)	Page 2 of 3     

THIS PAGE INTENTIONALLY LEFT BLANK

EPA ID NO: I___I___I___I I___I___I___I I___I___I___I I___I___I___I
OMB#:  2050-0028   Expires XX/XX/XXXX

11.  Description of Hazardous Wastes (See instructions on page 21.)



A.  Waste Codes for Federally Regulated Hazardous Wastes.  Please list
the waste codes of the Federal hazardous wastes 		 handled at your site.
 List them in the order they are presented in the regulations (e.g.,
D001, D003, F007, U112).  Use an 		 additional page if more spaces are
needed.



	

	

	

	

	

	

                     



	

	

	

	

	

	





	

	

	

	

	

	





B.  Waste Codes for State-Regulated (i.e., non-Federal) Hazardous
Wastes.  Please list the waste codes of the State-regulated

 hazardous wastes handled at your site.  List them in the order they are
presented in the regulations.  Use an additional page if 		 more spaces
are needed for waste codes.



	

	

	

	

	

	





	

	

	

	

	

	





	

	

	

	

	

	





12.  Comments (See instructions on page 21.)











































$

$

$

$

$

$

$

$

R

S

‚

ƒ

Æ

Ç

J

P

Q

S

Y

ƒ

Ÿ

«

¬

Ç

Ò

$

$

kdž

$

	

$

Ð

¨€

Ð

¨€

Ð

¨€

Ð

¨€

Ð

¨€

Ð

¨€

Ð

¨€

Ð

¨€

Ð

¨€

Ð

¨€

Ð

¨€

Ð

¨€

Ð

¨€

Ð

¨€

Ð

¨€

Ð

¨€

Ð

¨€

Ð

¨€

Ð

¨€

Ð

¨€

Ð

¨€

Ð

¨€

Ð

¨€

Ð

¨€

Ð

¨€

Ð

¨€

Ð

¨€

Ð

¨€

Ð

¨€

̀submitted. Based on my inquiry of the person or persons who manage the
system, or those persons directly responsible for gathering the
information, the information submitted is, to the best of my knowledge
and belief, true, accurate, and complete. I am aware that there are
significant penalties for submitting false information, including the
possibility of fine and imprisonment for knowing violations.

For the RCRA Hazardous Waste Part A Permit Application, all operator(s)
and owner(s) must sign (see 40 CFR 270.10 (b) and 270.11).  (See
instructions on page 21.)



Signature of operator, owner, or an authorized representative	

Name and Official Title (type or print)	

Date Signed (mm/dd/yyyy)



	

	





	

	





	

	





	

	



  EPA Form 8700-12 (Revised XX/XXXX)	Page 3 of 3     

THIS PAGE INTENTIONALLY LEFT BLANK



 PAGE  40 

 PAGE  41 

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Site ID Form

(Continued)

Site ID Form

(Continued)

Site ID Form

(Continued)

Site ID Form

(Continued)

Site ID Form

(Continued)

Site ID Form

(Continued)

Site ID Form

(Continued)

Site ID Form

(Continued)

Site ID Form

(Continued)

Site ID Form

(Continued)

Site ID Form

(Continued)

Site ID Form

(Continued)

Site ID Form

(Continued)

Site ID Form

(Continued)

Site ID Form

(Continued)

Site ID Form

(Continued)

Site ID Form

(Continued)

Site ID Form

(Continued)

Site ID Form

(Continued)

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

Notification of Regulated Waste Activity

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

D

R

    A

         F

    T

Not for use

