1                                                          The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Unable to open SASUSER.REGSTRY. WORK.REGSTRY will be opened
instead.

NOTE: All registry changes will be lost at the end of the session.

WARNING: Unable to copy SASUSER registry to WORK registry. Because of
this, you will not see registry customizations during this 

         session.

NOTE: Unable to open SASUSER.PROFILE. WORK.PROFILE will be opened
instead.

NOTE: All profile changes will be lost at the end of the session.

NOTE: Copyright (c) 2002-2008 by SAS Institute Inc., Cary, NC, USA. 

NOTE: SAS (r) Proprietary Software 9.2 (TS1M0) 

      Licensed to ABT ASSOCIATES INC, Site 0070005971.

NOTE: This session is executing on the X64_SRV  platform.

NOTE: SAS initialization used:

      real time           0.12 seconds

      cpu time            0.10 seconds

      

1          *Matthew LaPenta;

2          *Created 02.08.08;

3          

4          

5          *Modified 11.21.08 revised analysis;

6          *Modified 10.24.08 revised analysis;

7          *Modified 02.26.08 add average to output;

8          *Modified 02.22.08 add distributional information;

9          *Modified 02.21.08 increase number of samples;

10         *Modified 02.20.08 increase program efficiency;

11         *Modified 02.19.08 use revenue bracket-specific numbers of
vessels;

12         *Modified 02.16.08 output naics-firm-specific distributions;

13         *Modified 02.15.08 output naics-firm-specific distributions;

14         *Modified 02.12.08 output naics-specific distributions;

15         *Modified 02.11.08 (developing program);

16         *Description

17         	There are 15 low-cost and 19 high-cost practices required of
vessels subject to the discharge rule.

18         		For each individual practice there is a probability that an
incremental cost is incurred under a

19         		rule scenario.  This program calculates the probability
that incremental costs are incurred for each

20         		possible combination of practices (assuming that the
probability of incurring incremental costs is

21         		independent across practices).  Data are exported to excel
that show, for each vessel type,

22         		the practice combination, the number of vessels for the
practice combination, the probability of

23         		a practice combination, the per-vessel cost of a practice
combination, and the total costs associated

24         		with a practice combination;

25         *Drive (c or h);

26         	%let d=h;

27         *File Location;

28         	%let mainloc=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\;

29         	%let inloc=&mainloc.Inputs\;

30         	%let outloc=&mainloc.Outputs\;

31         

32         	*Inputs;

33         %let input=&inloc.Distribution Analysis Inputs NEW;

34         *Outputs;

35         %let samp=11;

36         %let output=&outloc.DAO&samp._;

2                                                          The SAS
System                            15:50 Friday, November 21, 2008

37         %let output2=&outloc.Dist&samp._;

38         *let output3=&outloc.Dist&samp._;

39         

40         libname temp "&mainloc.Temp";

NOTE: Libref TEMP was successfully assigned as follows: 

      Engine:        V9 

      Physical Name: H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Temp

41         libname temp2 "&mainloc.Temp\temp2";

NOTE: Libref TEMP2 was successfully assigned as follows: 

      Engine:        V9 

      Physical Name: H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Temp\temp2

42         libname temp3 "&mainloc.Temp\temp3";

NOTE: Libref TEMP3 was successfully assigned as follows: 

      Engine:        V9 

      Physical Name: H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Temp\temp3

43         libname temp4 "&mainloc.Temp\temp4";

NOTE: Libref TEMP4 was successfully assigned as follows: 

      Engine:        V9 

      Physical Name: H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Temp\temp4

44         

45         PROC DATASETS LIBRARY=temp   MEMTYPE=DATA    KILL nolist;

46         QUIT;

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.04 seconds

      cpu time            0.03 seconds

      

47         PROC DATASETS LIBRARY=temp2   MEMTYPE=DATA    KILL nolist;

NOTE: Deleting TEMP2.N4 (memtype=DATA).

NOTE: Deleting TEMP2.NUM (memtype=DATA).

NOTE: Deleting TEMP2.TH2 (memtype=DATA).

48         QUIT;

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

49         PROC DATASETS LIBRARY=temp3   MEMTYPE=DATA    KILL nolist;

50         QUIT;

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

51         PROC DATASETS LIBRARY=temp4   MEMTYPE=DATA    KILL nolist;

52         QUIT;

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

3                                                          The SAS
System                            15:50 Friday, November 21, 2008

53         PROC DATASETS LIBRARY=work   MEMTYPE=DATA    KILL nolist;

54         QUIT;

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

55         *Begin Program;

56         

57         *This Macro is used to Import data from excel;

58         %macro import(infile,sheet,out);

59         PROC IMPORT OUT= WORK.&out

60                     DATAFILE= "&infile. &sheet."

61                     DBMS=CSV REPLACE;

62              GETNAMES=YES;

63              DATAROW=2;

64         RUN;

65         %mend;

66         *This Macro is used to Export data to excel;

67         %macro export(datafile,outfile,sheet);

68         

69         PROC EXPORT DATA= &datafile.

70                     OUTFILE= "&outfile.&sheet."

71                     DBMS=CSV REPLACE;

72              PUTNAMES=YES;

73         RUN;

74         

75         %mend;

76         

77         %import(&input, naicsnum.csv,num);

78         
/**********************************************************************

79          *   PRODUCT:   SAS

80          *   VERSION:   9.2

81          *   CREATOR:   External File Interface

82          *   DATE:      21NOV08

83          *   DESC:      Generated SAS Datastep Code

84          *   TEMPLATE SOURCE:  (None Specified.)

85         
***********************************************************************/

86             data WORK.NUM                                     ;

87             %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

88             infile 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Inputs\Distribution Analysis Inputs NEW naicsnum.csv'

88       ! delimiter = ',' MISSOVER DSD lrecl=32767 firstobs=2 ;

89                informat NAICS $16. ;

90                informat m1 best32. ;

91                informat m2 best32. ;

92                informat m3 best32. ;

93                informat m4 best32. ;

94                informat m5 best32. ;

95                informat m6 best32. ;

96                informat m7 best32. ;

97                informat m8 best32. ;

4                                                          The SAS
System                            15:50 Friday, November 21, 2008

98                informat m9 best32. ;

99                informat m10 best32. ;

100               informat m11 best32. ;

101               format NAICS $16. ;

102               format m1 best12. ;

103               format m2 best12. ;

104               format m3 best12. ;

105               format m4 best12. ;

106               format m5 best12. ;

107               format m6 best12. ;

108               format m7 best12. ;

109               format m8 best12. ;

110               format m9 best12. ;

111               format m10 best12. ;

112               format m11 best12. ;

113            input

114                        NAICS $

115                        m1

116                        m2

117                        m3

118                        m4

119                        m5

120                        m6

121                        m7

122                        m8

123                        m9

124                        m10

125                        m11

126            ;

127            if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

128            run;

NOTE: The infile 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Inputs\Distribution Analysis Inputs NEW naicsnum.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Inputs\Distribution Analysis Inputs NEW naicsnum.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=1189,

      Last Modified=21Nov2008:14:34:40,

      Create Time=21Nov2008:14:34:38

NOTE: 11 records were read from the infile
'H:\Projects\Tyche_Option_1_Task_1-04\SAS Analysis\Inputs\Distribution
Analysis Inputs 

      NEW naicsnum.csv'.

      The minimum record length was 85.

      The maximum record length was 118.

NOTE: The data set WORK.NUM has 11 observations and 12 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

11 rows created in WORK.NUM                                  from
H:\Projects\Tyche_Option_1_Task_1-04\SAS 

Analysis\Inputs\Distribution Analysis Inputs NEW naicsnum.csv.

  

  

  

NOTE: WORK.NUM data set was successfully created.

5                                                          The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE IMPORT used (Total process time):

      real time           0.12 seconds

      cpu time            0.10 seconds

      

129        data temp2.num;

130        	set num;

131        run;

NOTE: There were 11 observations read from the data set WORK.NUM.

NOTE: The data set TEMP2.NUM has 11 observations and 12 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

132        

133        *	1	get thresholds data;

134        %import(&input, NAICSthresh.csv,th1);

135        
/**********************************************************************

136         *   PRODUCT:   SAS

137         *   VERSION:   9.2

138         *   CREATOR:   External File Interface

139         *   DATE:      21NOV08

140         *   DESC:      Generated SAS Datastep Code

141         *   TEMPLATE SOURCE:  (None Specified.)

142        
***********************************************************************/

143            data WORK.TH1                                     ;

144            %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

145            infile 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Inputs\Distribution Analysis Inputs NEW NAICSthresh.csv'

145      ! delimiter = ',' MISSOVER DSD lrecl=32767 firstobs=2 ;

146               informat NAICS $16. ;

147               informat A1 best32. ;

148               informat A2 best32. ;

149               informat A3 best32. ;

150               informat A4 best32. ;

151               informat A5 best32. ;

152               informat A6 best32. ;

153               informat A7 best32. ;

154               informat A8 best32. ;

155               informat A9 best32. ;

156               informat A10 best32. ;

157               informat A11 best32. ;

158               informat RR1 best32. ;

159               informat RR2 best32. ;

160               informat RR3 best32. ;

161               informat RR4 best32. ;

162               informat RR5 best32. ;

163               informat RR6 best32. ;

164               informat RR7 best32. ;

165               informat RR8 best32. ;

166               informat RR9 best32. ;

167               informat RR10 best32. ;

6                                                          The SAS
System                            15:50 Friday, November 21, 2008

168               informat RR11 best32. ;

169               informat L1 best32. ;

170               informat L2 best32. ;

171               informat L3 best32. ;

172               informat L4 best32. ;

173               informat L5 best32. ;

174               informat L6 best32. ;

175               informat L7 best32. ;

176               informat L8 best32. ;

177               informat L9 best32. ;

178               informat L10 best32. ;

179               informat L11 best32. ;

180               informat H1 best32. ;

181               informat H2 best32. ;

182               informat H3 best32. ;

183               informat H4 best32. ;

184               informat H5 best32. ;

185               informat H6 best32. ;

186               informat H7 best32. ;

187               informat H8 best32. ;

188               informat H9 best32. ;

189               informat H10 best32. ;

190               informat H11 best32. ;

191               format NAICS $16. ;

192               format A1 best12. ;

193               format A2 best12. ;

194               format A3 best12. ;

195               format A4 best12. ;

196               format A5 best12. ;

197               format A6 best12. ;

198               format A7 best12. ;

199               format A8 best12. ;

200               format A9 best12. ;

201               format A10 best12. ;

202               format A11 best12. ;

203               format RR1 best12. ;

204               format RR2 best12. ;

205               format RR3 best12. ;

206               format RR4 best12. ;

207               format RR5 best12. ;

208               format RR6 best12. ;

209               format RR7 best12. ;

210               format RR8 best12. ;

211               format RR9 best12. ;

212               format RR10 best12. ;

213               format RR11 best12. ;

214               format L1 best12. ;

215               format L2 best12. ;

216               format L3 best12. ;

217               format L4 best12. ;

218               format L5 best12. ;

219               format L6 best12. ;

220               format L7 best12. ;

221               format L8 best12. ;

7                                                          The SAS
System                            15:50 Friday, November 21, 2008

222               format L9 best12. ;

223               format L10 best12. ;

224               format L11 best12. ;

225               format H1 best12. ;

226               format H2 best12. ;

227               format H3 best12. ;

228               format H4 best12. ;

229               format H5 best12. ;

230               format H6 best12. ;

231               format H7 best12. ;

232               format H8 best12. ;

233               format H9 best12. ;

234               format H10 best12. ;

235               format H11 best12. ;

236            input

237                        NAICS $

238                        A1

239                        A2

240                        A3

241                        A4

242                        A5

243                        A6

244                        A7

245                        A8

246                        A9

247                        A10

248                        A11

249                        RR1

250                        RR2

251                        RR3

252                        RR4

253                        RR5

254                        RR6

255                        RR7

256                        RR8

257                        RR9

258                        RR10

259                        RR11

260                        L1

261                        L2

262                        L3

263                        L4

264                        L5

265                        L6

266                        L7

267                        L8

268                        L9

269                        L10

270                        L11

271                        H1

272                        H2

273                        H3

274                        H4

275                        H5

8                                                          The SAS
System                            15:50 Friday, November 21, 2008

276                        H6

277                        H7

278                        H8

279                        H9

280                        H10

281                        H11

282            ;

283            if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

284            run;

NOTE: The infile 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Inputs\Distribution Analysis Inputs NEW NAICSthresh.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Inputs\Distribution Analysis Inputs NEW NAICSthresh.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=3603,

      Last Modified=21Nov2008:15:42:06,

      Create Time=21Nov2008:14:34:27

NOTE: 11 records were read from the infile
'H:\Projects\Tyche_Option_1_Task_1-04\SAS Analysis\Inputs\Distribution
Analysis Inputs 

      NEW NAICSthresh.csv'.

      The minimum record length was 242.

      The maximum record length was 338.

NOTE: The data set WORK.TH1 has 11 observations and 45 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

11 rows created in WORK.TH1                                  from
H:\Projects\Tyche_Option_1_Task_1-04\SAS 

Analysis\Inputs\Distribution Analysis Inputs NEW NAICSthresh.csv.

  

  

  

NOTE: WORK.TH1 data set was successfully created.

NOTE: PROCEDURE IMPORT used (Total process time):

      real time           0.07 seconds

      cpu time            0.07 seconds

      

285        data TEMP2.th2 (keep= NAICS O1-O11 T1-T11);

286        	set th1 (keep=NAICS A1-A11);

287        		array A(11) A1-A11;

288        		array O(11) O1-O11;

289        		array T(11) T1-T11;

290        			do i=1 to 11;

291        				if A(i)>0 then do;

292        					O(i)=.01*A(i);

293        					T(i)=.03*A(i);

294        				end;

295        			end;

296        run;

NOTE: There were 11 observations read from the data set WORK.TH1.

NOTE: The data set TEMP2.TH2 has 11 observations and 23 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

9                                                          The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

297        

298        *	2a	Get percentages of vessel types for NAICS (Import);

299        %import(&input, NAICSWEIGHTS.csv,n1);

300        
/**********************************************************************

301         *   PRODUCT:   SAS

302         *   VERSION:   9.2

303         *   CREATOR:   External File Interface

304         *   DATE:      21NOV08

305         *   DESC:      Generated SAS Datastep Code

306         *   TEMPLATE SOURCE:  (None Specified.)

307        
***********************************************************************/

308            data WORK.N1                                      ;

309            %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

310            infile 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Inputs\Distribution Analysis Inputs NEW NAICSWEIGHTS.csv'

310      ! delimiter = ',' MISSOVER DSD lrecl=32767 firstobs=2 ;

311               informat Class $22. ;

312               informat Number best32. ;

313               informat NAICS $16. ;

314               format Class $22. ;

315               format Number best12. ;

316               format NAICS $16. ;

317            input

318                        Class $

319                        Number

320                        NAICS $

321            ;

322            if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

323            run;

NOTE: The infile 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Inputs\Distribution Analysis Inputs NEW NAICSWEIGHTS.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Inputs\Distribution Analysis Inputs NEW NAICSWEIGHTS.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=2710,

      Last Modified=21Nov2008:14:34:00,

      Create Time=21Nov2008:14:33:28

NOTE: 100 records were read from the infile
'H:\Projects\Tyche_Option_1_Task_1-04\SAS Analysis\Inputs\Distribution
Analysis Inputs 

      NEW NAICSWEIGHTS.csv'.

      The minimum record length was 18.

      The maximum record length was 36.

NOTE: The data set WORK.N1 has 100 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

100 rows created in WORK.N1                                   from
H:\Projects\Tyche_Option_1_Task_1-04\SAS 

Analysis\Inputs\Distribution Analysis Inputs NEW NAICSWEIGHTS.csv.

  

  

  

10                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: WORK.N1 data set was successfully created.

NOTE: PROCEDURE IMPORT used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

324        

325        *	2b	Get percentages of vessel types for NAICS (drop unneded
vars);

326        data n2;

327        	set n1;

328        		if class="Dummy" then delete;

329        run;

NOTE: There were 100 observations read from the data set WORK.N1.

NOTE: The data set WORK.N2 has 99 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

330        

331        *	2c	Get percentages of vessel types for NAICS (Get total
number of vessels by NAICS);

332        proc sql;

333        	create table n3 as select

334        		n2.*,

335        		number/sum(number) as percent

336        	from n2 group by NAICS order by NAICS,Class;

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.N3 created, with 99 rows and 4 columns.

337        quit;

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

338        

339        *	2d	Get percentages of vessel types for NAICS (Get
percentage for each vessel type);

340        %macro boat2(class,short,ini);

341        data x_&ini. (keep=NAICS &ini._percent);

342        	set n3;

343        		if Class="&class";

344        		rename percent=&ini._percent;

345        run;

346        %mend;

347        %boat2(Cruise Ships,Cruise,cs);

NOTE: There were 99 observations read from the data set WORK.N3.

NOTE: The data set WORK.X_CS has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

11                                                         The SAS
System                            15:50 Friday, November 21, 2008

348        %boat2(Commercial Fishing,Comm,cf);

NOTE: There were 99 observations read from the data set WORK.N3.

NOTE: The data set WORK.X_CF has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

349        %boat2(Freight Barges,FBarge,fb);

NOTE: There were 99 observations read from the data set WORK.N3.

NOTE: The data set WORK.X_FB has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

350        %boat2(Freight Ships,FShips,fs);

NOTE: There were 99 observations read from the data set WORK.N3.

NOTE: The data set WORK.X_FS has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

351        %boat2(Passenger Vessels,Pass,pv);

NOTE: There were 99 observations read from the data set WORK.N3.

NOTE: The data set WORK.X_PV has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

352        %boat2(Recreational Ships,Rec,rs);

NOTE: There were 99 observations read from the data set WORK.N3.

NOTE: The data set WORK.X_RS has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

353        %boat2(Tank Barges,TBarge,tb);

NOTE: There were 99 observations read from the data set WORK.N3.

NOTE: The data set WORK.X_TB has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

12                                                         The SAS
System                            15:50 Friday, November 21, 2008

354        %boat2(Tank Ships,TShips,ts);

NOTE: There were 99 observations read from the data set WORK.N3.

NOTE: The data set WORK.X_TS has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

355        %boat2(Utility Vessels,Utility,ut);

NOTE: There were 99 observations read from the data set WORK.N3.

NOTE: The data set WORK.X_UT has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

356        *	2c	Get percentages of vessel types for NAICS (Combine
data);

357        data TEMP2.n4;

358        	merge x_cs x_cf x_fb x_fs x_pv x_rs x_tb x_ts x_ut;

359        	by NAICS;

360        run;

NOTE: There were 11 observations read from the data set WORK.X_CS.

NOTE: There were 11 observations read from the data set WORK.X_CF.

NOTE: There were 11 observations read from the data set WORK.X_FB.

NOTE: There were 11 observations read from the data set WORK.X_FS.

NOTE: There were 11 observations read from the data set WORK.X_PV.

NOTE: There were 11 observations read from the data set WORK.X_RS.

NOTE: There were 11 observations read from the data set WORK.X_TB.

NOTE: There were 11 observations read from the data set WORK.X_TS.

NOTE: There were 11 observations read from the data set WORK.X_UT.

NOTE: The data set TEMP2.N4 has 11 observations and 10 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

361        

362        

363        *3	Import data from Excel;

364        %import(&input, infile.csv,d1);

Number of names found is less than number of variables found. 

Number of names found is less than number of variables found. 

365        
/**********************************************************************

366         *   PRODUCT:   SAS

367         *   VERSION:   9.2

368         *   CREATOR:   External File Interface

369         *   DATE:      21NOV08

370         *   DESC:      Generated SAS Datastep Code

371         *   TEMPLATE SOURCE:  (None Specified.)

372        
***********************************************************************/

13                                                         The SAS
System                            15:50 Friday, November 21, 2008

373            data WORK.D1                                      ;

374            %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

375            infile 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Inputs\Distribution Analysis Inputs NEW infile.csv'

375      ! delimiter = ',' MISSOVER DSD lrecl=32767 firstobs=2 ;

376               informat Estimate $1. ;

377               informat Practice best32. ;

378               informat Class $20. ;

379               informat Count best32. ;

380               informat Percent best32. ;

381               informat Cost best32. ;

382               informat VAR7 $1. ;

383               informat VAR8 $1. ;

384               format Estimate $1. ;

385               format Practice best12. ;

386               format Class $20. ;

387               format Count best12. ;

388               format Percent best12. ;

389               format Cost best12. ;

390               format VAR7 $1. ;

391               format VAR8 $1. ;

392            input

393                        Estimate $

394                        Practice

395                        Class $

396                        Count

397                        Percent

398                        Cost

399                        VAR7 $

400                        VAR8 $

401            ;

402            if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

403            run;

NOTE: The infile 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Inputs\Distribution Analysis Inputs NEW infile.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Inputs\Distribution Analysis Inputs NEW infile.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=11571,

      Last Modified=21Nov2008:14:32:11,

      Create Time=21Nov2008:14:32:07

NOTE: 333 records were read from the infile
'H:\Projects\Tyche_Option_1_Task_1-04\SAS Analysis\Inputs\Distribution
Analysis Inputs 

      NEW infile.csv'.

      The minimum record length was 21.

      The maximum record length was 51.

NOTE: The data set WORK.D1 has 333 observations and 8 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

333 rows created in WORK.D1                                   from
H:\Projects\Tyche_Option_1_Task_1-04\SAS 

Analysis\Inputs\Distribution Analysis Inputs NEW infile.csv.

  

  

  

14                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: WORK.D1 data set was successfully created.

NOTE: PROCEDURE IMPORT used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

404        

405        

406        *This macro generates the exact distribution of costs for the
various vessel types;

407        %macro boat(class,short,ini);

408        

409        *4	Get data for a vessel type defined by macro variable;

410        data d2;

411        	set d1;

412        		if Class="&class";

413        run;

414        

415        *5	Redefine the vessel count and the percentage variable, so
the vessell count is the same for all practices

416        		and the percentage is the percentage of all vessels that
will incur the costs;

417        proc sql;

418        	create table d3 as select

419        		d2.*,

420        		max(count) as maxcount,

421        		count/max(count)*percent as newpercent

422        	from d2;

423        quit;

424        

425        *6 generate a data set for each practice type and format the
data set

426        		Practice_X 	=1 when practice X is used and =0 OTW

427        		Count_X    	=Number of Vessels of type &class

428        		percent_X	=Probability of a sceanio

429        		cost_X		=is the cost of practice X under a scenario (zero
when Practice_X 	=0)

430        			;

431        %macro divide(est,top);

432        	%do i=1 %to &top;

433        		data x1;

434        			set d3;

435        				if estimate="&est" and practice=&i;

436        				practice_&i		=1;

437        				count_&i		=maxcount;

438        				percent_&i		=newpercent;

439        				cost_&i			=cost;

440        		run;

441        		data x2;

442        			set d3;

443        				if estimate="&est" and practice=&i;

444        				practice_&i		=0;

445        				count_&i		=maxcount;

446        				percent_&i		=1-newpercent;

447        				cost_&i			=0;

448        		run;

449        		data &est.&i (keep=practice_&i count_&i percent_&i
cost_&i);

450        			set x1 x2;

451        				if percent_&i~=0;

15                                                         The SAS
System                            15:50 Friday, November 21, 2008

452        		run;

453        	%end;

454        %mend;

455        %divide(H,21); *there are 21 high cost practices;

456        %divide(L,16); *there are 16 low cost practices;

457        

458        *7	Initialize first data set for cartesian product joins;

459        data HH1;

460        	set h1;

461        run;

462        data LL1;

463        	set L1;

464        run;

465        

466        *8	This macro performs a series of cartesian product joins of
the practice-specific data sets.

467        		A cartesian product join generates all possible
combinations between two datasets;

468        %macro cartesian(l,h);

469        proc sql;

470        	create table HH&h as select

471        		hh&l..*,h&h..*

472        	from hh&l.,h&h.;

473        quit;

474        proc sql;

475        	create table LL&h as select

476        		LL&l..*,l&h..*

477        	from LL&l.,l&h.;

478        quit;

479        %mend;

480        %cartesian(1,2);

481        %cartesian(2,3);

482        %cartesian(3,4);

483        %cartesian(4,5);

484        %cartesian(5,6);

485        %cartesian(6,7);

486        %cartesian(7,8);

487        %cartesian(8,9);

488        %cartesian(9,10);

489        %cartesian(10,11);

490        %cartesian(11,12);

491        %cartesian(12,13);

492        %cartesian(13,14);

493        %cartesian(14,15);

494        %cartesian(15,16)

495        *9	This macro performs a series of cartesian product joins of
the High Cost practice-specific data sets.

496        		A cartesian product join generates all possible
combinations between two datasets;

497        %macro cartesian2(l,h);

498        proc sql;

499        	create table HH&h as select

500        		hh&l..*,h&h..*

501        	from hh&l.,h&h.;

502        quit;

503        %mend;

504        %cartesian2(16,17);

505        %cartesian2(17,18);

16                                                         The SAS
System                            15:50 Friday, November 21, 2008

506        %cartesian2(18,19);

507        %cartesian2(19,20);

508        %cartesian2(20,21);

509        

510        *10	(for high cost estimates) Calculate probability of each
practice combination.

511        		Calculate Number of Vessels affected under each practice
combination.

512        		Calculate per-vessel and total cost of each practice
combination.

513        		Drop combinations that are not observed.;

514        data d4 (compress=yes drop=count_1-count_21);

515        	set hh21;

516        		&ini.probability=percent_1*

517        					percent_2*

518        					percent_3*

519        					percent_4*

520        					percent_5*

521        					percent_6*

522        					percent_7*

523        					percent_8*

524        					percent_9*

525        					percent_10*

526        					percent_11*

527        					percent_12*

528        					percent_13*

529        					percent_14*

530        					percent_15*

531        					percent_16*

532        					percent_17*

533        					percent_18*

534        					percent_19*

535        					percent_20*

536        					percent_21;

537        		if &ini.probability~=0;

538        		&ini.count=count_1*probability;

539        		&ini.cost=sum(of cost_1-cost_21);

540        		&ini.totalcost=cost*count;

541        run;

542        

543        *11	Format dataset;

544        data High&short (drop=practice_1-practice_21 i &ini.count
&ini.TotalCost Class compress=yes);

545        	retain Class practice_1-practice_21;* probability count cost
TotalCost;

546        	set d4 (keep = practice_1-practice_21 &ini.probability
&ini.count &ini.cost &ini.TotalCost);

547        	format class $40.;

548        	Class="&Class";

549        		array p(21) practice_1-practice_21;

550        		array ne(21) &ini._1-&ini._21;

551        			do i=1 to 21;

552        				ne(i)=p(i);

553        			end;

554        run;

555        

556        *12	(for Low cost estimates) Calculate probability of each
practice combination.

557        		Calculate Number of Vessels affected under each practice
combination.

558        		Calculate per-vessel and total cost of each practice
combination.

559        		Drop combinations that are not observed.;

17                                                         The SAS
System                            15:50 Friday, November 21, 2008

560        data d5 (compress=yes drop=count_1-count_16);

561        	set LL16;

562        		&ini.probability=percent_1*

563        					percent_2*

564        					percent_3*

565        					percent_4*

566        					percent_5*

567        					percent_6*

568        					percent_7*

569        					percent_8*

570        					percent_9*

571        					percent_10*

572        					percent_11*

573        					percent_12*

574        					percent_13*

575        					percent_14*

576        					percent_15*

577        					percent_16

578        ;

579        		if &ini.probability~=0;

580        		&ini.count=count_1*&ini.probability;

581        		&ini.cost=sum(of cost_1-cost_16);

582        		&ini.totalcost=&ini.cost*count;

583        run;

584        

585        *13	Format dataset;

586        data Low&short (drop=practice_1-practice_16 i &ini.count
&ini.TotalCost Class compress=yes);

587        	retain practice_1_practice_16;* probability count cost
TotalCost;

588        	set d5 (keep = practice_1-practice_16 &ini.probability
&ini.count &ini.cost &ini.TotalCost);

589        		array p(16) practice_1-practice_16;

590        		array ne(16) &ini._1-&ini._16;

591        			do i=1 to 16;

592        				ne(i)=p(i);

593        			end;

594        	format class $40.;

595        	Class="&Class";

596        run;

597        

598        *14 Sort by per-vessel cost;

599        proc sort data=Low&short; by &ini.cost; run;

600        proc sort data=High&short; by &ini.cost; run;

601        

602        *15 Export Data to Excel;

603        *%export(Low&short,"&output.",Low&short);

604        *%export(High&short,"&output.",High&short);

605        

606        *ADD DOCUMENTATION!!;

607        %macro percentiles(ty);

608        

609        proc univariate data=&ty.&short. noprint;

610        			weight &ini.probability;

611        			output out=&ty.&short.1 PCTLPRE=&ini.C_

612        				PCTLPTS= 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80
85 90 95

613        				Min=&ini.C_0 Max=&ini.C_100;

18                                                         The SAS
System                            15:50 Friday, November 21, 2008

614        			var &ini.Cost;

615        run;

616        

617        proc transpose data=&ty.&short.1 out=&ty.&short.2
prefix=&ini.C_ ;

618        	var &ini.C_0 &ini.C_5 &ini.C_10 &ini.C_15 &ini.C_20
&ini.C_25 &ini.C_30 &ini.C_35

619        		&ini.C_40 &ini.C_45 &ini.C_50 &ini.C_55 &ini.C_60 &ini.C_65
&ini.C_70 &ini.C_75 &ini.C_80 &ini.C_85 &ini.C_90 &ini.C_95

619      !  &ini.C_100;

620        run;

621        data temp3.&ty.&short.3 (keep=&ini._Cost compress=Yes);

622        	set &ty.&short.2;

623        		rename &ini.C_1=&ini._Cost;

624        *3;*		if 		_n_=1 | _n_=11 | _n_=21;

625        *6;*		if 		_n_=1 | _n_=5 | _n_=9 | _n_=13 | _n_=17 | _n_=21;

626        *11;		if 		_n_=1 | _n_=5 | _n_=9 | _n_=13 | _n_=17 | _n_=21 |
	_n_=3 | _n_=7 | _n_=11 | _n_=15 | _n_=19;

627        run;

628        /*

629        proc univariate data=&ty.&short. noprint;

630        			weight &ini.probability;

631        			output out=&ty.&short.1 PCTLPRE=&ini.C_

632        				PCTLPTS= 	2 4 6 8 10 12 14 16 18

633        							20 22 24 26 28

634        							30 32 34 36 38

635        							40 42 44 46 48

636        							50 52 54 56 58

637        							60 62 64 66 68

638        							70 72 74 76 78

639        							80 82 84 86 88

640        							90 92 94 96 98

641         				Min=&ini.C_0 Max=&ini.C_100;

642        			var &ini.Cost;

643        run;

644        proc transpose data=&ty.&short.1 out=&ty.&short.2
prefix=&ini.C_ ;

645        	var

646        &ini.C_0  &ini.C_2  &ini.C_4  &ini.C_6  &ini.C_8

647        &ini.C_10 &ini.C_12 &ini.C_14 &ini.C_16 &ini.C_18

648        &ini.C_20 &ini.C_22 &ini.C_24 &ini.C_26 &ini.C_28

649        &ini.C_30 &ini.C_32 &ini.C_34 &ini.C_36 &ini.C_38

650        &ini.C_40 &ini.C_42 &ini.C_44 &ini.C_46 &ini.C_48

651        &ini.C_50 &ini.C_52 &ini.C_54 &ini.C_56 &ini.C_58

652        &ini.C_60 &ini.C_62 &ini.C_64 &ini.C_66 &ini.C_68

653        &ini.C_70 &ini.C_72 &ini.C_74 &ini.C_76 &ini.C_78

654        &ini.C_80 &ini.C_82 &ini.C_84 &ini.C_86 &ini.C_88

655        &ini.C_90 &ini.C_92 &ini.C_94 &ini.C_96 &ini.C_98 &ini.C_100;

656        run;

657        data temp3.&ty.&short.3 (keep=&ini._Cost compress=Yes);

658        	set &ty.&short.2;

659        		rename &ini.C_1=&ini._Cost;

660        		*if 		_n_=1 | _n_=5 | _n_=9 | _n_=13 | _n_=17 | _n_=21

661        			| 	_n_=3 | _n_=7 | _n_=11 | _n_=15 | _n_=19;

662        run;

663        */

664        %mend;

665        %percentiles(Low);

666        %percentiles(High);

19                                                         The SAS
System                            15:50 Friday, November 21, 2008

667        %mend;

668        %boat(Cruise Ships,Cruise,cs);

NOTE: There were 333 observations read from the data set WORK.D1.

NOTE: The data set WORK.D2 has 37 observations and 8 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D3 created, with 37 rows and 10 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

20                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H2 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H3 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

21                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H4 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H5 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

22                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.H6 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H7 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H8 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

23                                                         The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H9 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H10 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

24                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H11 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H12 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

25                                                         The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H13 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H14 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

26                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H15 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H16 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

27                                                         The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H17 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H18 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

28                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H19 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H20 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H21 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

29                                                         The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L2 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

30                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L3 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L4 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

31                                                         The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L5 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L6 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

32                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L7 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L8 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

33                                                         The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L9 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L10 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

34                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L11 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L12 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L13 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

35                                                         The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L14 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L15 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

36                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L16 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.H1.

NOTE: The data set WORK.HH1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.L1.

NOTE: The data set WORK.LL1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH2 created, with 1 rows and 8 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL2 created, with 1 rows and 8 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

37                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH3 created, with 1 rows and 12 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL3 created, with 1 rows and 12 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH4 created, with 1 rows and 16 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL4 created, with 1 rows and 16 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH5 created, with 1 rows and 20 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL5 created, with 1 rows and 20 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH6 created, with 1 rows and 24 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

38                                                         The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL6 created, with 1 rows and 24 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH7 created, with 1 rows and 28 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL7 created, with 1 rows and 28 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH8 created, with 1 rows and 32 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL8 created, with 1 rows and 32 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH9 created, with 2 rows and 36 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL9 created, with 2 rows and 36 columns.

39                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH10 created, with 2 rows and 40 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL10 created, with 2 rows and 40 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH11 created, with 2 rows and 44 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL11 created, with 2 rows and 44 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH12 created, with 2 rows and 48 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL12 created, with 2 rows and 48 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

40                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Table WORK.HH13 created, with 2 rows and 52 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL13 created, with 2 rows and 52 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH14 created, with 4 rows and 56 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL14 created, with 4 rows and 56 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH15 created, with 8 rows and 60 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL15 created, with 8 rows and 60 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH16 created, with 16 rows and 64 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

41                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL16 created, with 16 rows and 64 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH17 created, with 16 rows and 68 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH18 created, with 16 rows and 72 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH19 created, with 16 rows and 76 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH20 created, with 16 rows and 80 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH21 created, with 16 rows and 84 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: Variable probability is uninitialized.

NOTE: Variable count is uninitialized.

NOTE: Variable cost is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

42                                                         The SAS
System                            15:50 Friday, November 21, 2008

      Each place is given by: (Number of times) at (Line):(Column).

      16 at 668:167   16 at 668:238   

NOTE: There were 16 observations read from the data set WORK.HH21.

NOTE: The data set WORK.D4 has 16 observations and 70 variables.

NOTE: Compressing data set WORK.D4 decreased size by 0.00 percent. 

      Compressed is 2 pages; un-compressed would require 2 pages.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 16 observations read from the data set WORK.D4.

NOTE: The data set WORK.HIGHCRUISE has 16 observations and 23 variables.

NOTE: Compressing data set WORK.HIGHCRUISE increased size by 100.00
percent. 

      Compressed is 2 pages; un-compressed would require 1 pages.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Variable count is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      16 at 668:164   

NOTE: There were 16 observations read from the data set WORK.LL16.

NOTE: The data set WORK.D5 has 16 observations and 53 variables.

NOTE: Compressing data set WORK.D5 increased size by 100.00 percent. 

      Compressed is 2 pages; un-compressed would require 1 pages.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Variable practice_1_practice_16 is uninitialized.

NOTE: There were 16 observations read from the data set WORK.D5.

NOTE: The data set WORK.LOWCRUISE has 16 observations and 18 variables.

NOTE: Compressing data set WORK.LOWCRUISE increased size by 100.00
percent. 

      Compressed is 2 pages; un-compressed would require 1 pages.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 16 observations read from the data set WORK.LOWCRUISE.

NOTE: The data set WORK.LOWCRUISE has 16 observations and 18 variables.

NOTE: Compressing data set WORK.LOWCRUISE increased size by 100.00
percent. 

      Compressed is 2 pages; un-compressed would require 1 pages.

NOTE: PROCEDURE SORT used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

43                                                         The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 16 observations read from the data set WORK.HIGHCRUISE.

NOTE: The data set WORK.HIGHCRUISE has 16 observations and 23 variables.

NOTE: Compressing data set WORK.HIGHCRUISE increased size by 100.00
percent. 

      Compressed is 2 pages; un-compressed would require 1 pages.

NOTE: PROCEDURE SORT used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The data set WORK.LOWCRUISE1 has 1 observations and 21 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.LOWCRUISE1.

NOTE: The data set WORK.LOWCRUISE2 has 21 observations and 3 variables.

NOTE: PROCEDURE TRANSPOSE used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Compression was disabled for data set TEMP3.LOWCRUISE3 because
compression overhead would increase the size of the data set.

NOTE: There were 21 observations read from the data set WORK.LOWCRUISE2.

NOTE: The data set TEMP3.LOWCRUISE3 has 11 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The data set WORK.HIGHCRUISE1 has 1 observations and 21 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.HIGHCRUISE1.

NOTE: The data set WORK.HIGHCRUISE2 has 21 observations and 3 variables.

NOTE: PROCEDURE TRANSPOSE used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Compression was disabled for data set TEMP3.HIGHCRUISE3 because
compression overhead would increase the size of the data set.

NOTE: There were 21 observations read from the data set
WORK.HIGHCRUISE2.

44                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set TEMP3.HIGHCRUISE3 has 11 observations and 1
variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

669        %boat(Commercial Fishing,Comm,cf);

NOTE: There were 333 observations read from the data set WORK.D1.

NOTE: The data set WORK.D2 has 37 observations and 8 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D3 created, with 37 rows and 10 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

45                                                         The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H2 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H3 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

46                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H4 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H5 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

47                                                         The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H6 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H7 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

48                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H8 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H9 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H10 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

49                                                         The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H11 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H12 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

50                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H13 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H14 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

51                                                         The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H15 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H16 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

52                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H17 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H18 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

53                                                         The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H19 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H20 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

54                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H21 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L2 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

55                                                         The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L3 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L4 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

56                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L5 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L6 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

57                                                         The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L7 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L8 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

58                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L9 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L10 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

59                                                         The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L11 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L12 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

60                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L13 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L14 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L15 has 1 observations and 4 variables.

61                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L16 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.H1.

NOTE: The data set WORK.HH1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.L1.

NOTE: The data set WORK.LL1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH2 created, with 1 rows and 8 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL2 created, with 1 rows and 8 columns.

62                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH3 created, with 1 rows and 12 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL3 created, with 1 rows and 12 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH4 created, with 2 rows and 16 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL4 created, with 2 rows and 16 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH5 created, with 4 rows and 20 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL5 created, with 4 rows and 20 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

63                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH6 created, with 4 rows and 24 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL6 created, with 4 rows and 24 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH7 created, with 4 rows and 28 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL7 created, with 4 rows and 28 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH8 created, with 4 rows and 32 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL8 created, with 4 rows and 32 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH9 created, with 4 rows and 36 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

64                                                         The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL9 created, with 4 rows and 36 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH10 created, with 4 rows and 40 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL10 created, with 4 rows and 40 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH11 created, with 4 rows and 44 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL11 created, with 4 rows and 44 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH12 created, with 8 rows and 48 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL12 created, with 8 rows and 48 columns.

NOTE: PROCEDURE SQL used (Total process time):

65                                                         The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH13 created, with 8 rows and 52 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL13 created, with 8 rows and 52 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH14 created, with 8 rows and 56 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL14 created, with 8 rows and 56 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH15 created, with 8 rows and 60 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL15 created, with 8 rows and 60 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH16 created, with 8 rows and 64 columns.

66                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL16 created, with 8 rows and 64 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH17 created, with 8 rows and 68 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH18 created, with 8 rows and 72 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH19 created, with 8 rows and 76 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH20 created, with 8 rows and 80 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH21 created, with 8 rows and 84 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

67                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Variable probability is uninitialized.

NOTE: Variable count is uninitialized.

NOTE: Variable cost is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      8 at 669:167   8 at 669:238   

NOTE: There were 8 observations read from the data set WORK.HH21.

NOTE: The data set WORK.D4 has 8 observations and 70 variables.

NOTE: Compressing data set WORK.D4 increased size by 100.00 percent. 

      Compressed is 2 pages; un-compressed would require 1 pages.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 8 observations read from the data set WORK.D4.

NOTE: The data set WORK.HIGHCOMM has 8 observations and 23 variables.

NOTE: Compressing data set WORK.HIGHCOMM increased size by 100.00
percent. 

      Compressed is 2 pages; un-compressed would require 1 pages.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Variable count is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      8 at 669:164   

NOTE: There were 8 observations read from the data set WORK.LL16.

NOTE: The data set WORK.D5 has 8 observations and 53 variables.

NOTE: Compressing data set WORK.D5 increased size by 100.00 percent. 

      Compressed is 2 pages; un-compressed would require 1 pages.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Variable practice_1_practice_16 is uninitialized.

NOTE: There were 8 observations read from the data set WORK.D5.

NOTE: The data set WORK.LOWCOMM has 8 observations and 18 variables.

NOTE: Compressing data set WORK.LOWCOMM increased size by 100.00
percent. 

      Compressed is 2 pages; un-compressed would require 1 pages.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 8 observations read from the data set WORK.LOWCOMM.

NOTE: The data set WORK.LOWCOMM has 8 observations and 18 variables.

68                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Compressing data set WORK.LOWCOMM increased size by 100.00
percent. 

      Compressed is 2 pages; un-compressed would require 1 pages.

NOTE: PROCEDURE SORT used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 8 observations read from the data set WORK.HIGHCOMM.

NOTE: The data set WORK.HIGHCOMM has 8 observations and 23 variables.

NOTE: Compressing data set WORK.HIGHCOMM increased size by 100.00
percent. 

      Compressed is 2 pages; un-compressed would require 1 pages.

NOTE: PROCEDURE SORT used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The data set WORK.LOWCOMM1 has 1 observations and 21 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.LOWCOMM1.

NOTE: The data set WORK.LOWCOMM2 has 21 observations and 3 variables.

NOTE: PROCEDURE TRANSPOSE used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Compression was disabled for data set TEMP3.LOWCOMM3 because
compression overhead would increase the size of the data set.

NOTE: There were 21 observations read from the data set WORK.LOWCOMM2.

NOTE: The data set TEMP3.LOWCOMM3 has 11 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The data set WORK.HIGHCOMM1 has 1 observations and 21 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.HIGHCOMM1.

NOTE: The data set WORK.HIGHCOMM2 has 21 observations and 3 variables.

NOTE: PROCEDURE TRANSPOSE used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

69                                                         The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Compression was disabled for data set TEMP3.HIGHCOMM3 because
compression overhead would increase the size of the data set.

NOTE: There were 21 observations read from the data set WORK.HIGHCOMM2.

NOTE: The data set TEMP3.HIGHCOMM3 has 11 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

670        %boat(Freight Barges,FBarge,fb);

NOTE: There were 333 observations read from the data set WORK.D1.

NOTE: The data set WORK.D2 has 37 observations and 8 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D3 created, with 37 rows and 10 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

70                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H2 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H3 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

71                                                         The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H4 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H5 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

72                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H6 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H7 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

73                                                         The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H8 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H9 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

74                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H10 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H11 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H12 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

75                                                         The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H13 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H14 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

76                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H15 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H16 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

77                                                         The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H17 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H18 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

78                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H19 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H20 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

79                                                         The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H21 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

80                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L2 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L3 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L4 has 2 observations and 4 variables.

81                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L5 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L6 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

82                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.03 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L7 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L8 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

83                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L9 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L10 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

84                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L11 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L12 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

85                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L13 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L14 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

86                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L15 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L16 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.H1.

NOTE: The data set WORK.HH1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.L1.

NOTE: The data set WORK.LL1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH2 created, with 1 rows and 8 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

87                                                         The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL2 created, with 1 rows and 8 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH3 created, with 2 rows and 12 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL3 created, with 2 rows and 12 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH4 created, with 4 rows and 16 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL4 created, with 4 rows and 16 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH5 created, with 8 rows and 20 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL5 created, with 8 rows and 20 columns.

88                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH6 created, with 16 rows and 24 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL6 created, with 16 rows and 24 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH7 created, with 16 rows and 28 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL7 created, with 16 rows and 28 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH8 created, with 16 rows and 32 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL8 created, with 16 rows and 32 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

89                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Table WORK.HH9 created, with 32 rows and 36 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL9 created, with 32 rows and 36 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH10 created, with 32 rows and 40 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL10 created, with 32 rows and 40 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH11 created, with 32 rows and 44 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL11 created, with 32 rows and 44 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH12 created, with 64 rows and 48 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

90                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL12 created, with 64 rows and 48 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH13 created, with 64 rows and 52 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL13 created, with 64 rows and 52 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH14 created, with 64 rows and 56 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL14 created, with 64 rows and 56 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH15 created, with 64 rows and 60 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL15 created, with 64 rows and 60 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

91                                                         The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH16 created, with 64 rows and 64 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL16 created, with 64 rows and 64 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH17 created, with 64 rows and 68 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH18 created, with 64 rows and 72 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH19 created, with 64 rows and 76 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH20 created, with 64 rows and 80 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH21 created, with 128 rows and 84 columns.

92                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Variable probability is uninitialized.

NOTE: Variable count is uninitialized.

NOTE: Variable cost is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      128 at 670:167   128 at 670:238   

NOTE: There were 128 observations read from the data set WORK.HH21.

NOTE: The data set WORK.D4 has 128 observations and 70 variables.

NOTE: Compressing data set WORK.D4 decreased size by 20.00 percent. 

      Compressed is 4 pages; un-compressed would require 5 pages.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 128 observations read from the data set WORK.D4.

NOTE: The data set WORK.HIGHFBARGE has 128 observations and 23
variables.

NOTE: Compressing data set WORK.HIGHFBARGE decreased size by 33.33
percent. 

      Compressed is 2 pages; un-compressed would require 3 pages.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Variable count is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      64 at 670:164   

NOTE: There were 64 observations read from the data set WORK.LL16.

NOTE: The data set WORK.D5 has 64 observations and 53 variables.

NOTE: Compressing data set WORK.D5 decreased size by 0.00 percent. 

      Compressed is 3 pages; un-compressed would require 3 pages.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Variable practice_1_practice_16 is uninitialized.

NOTE: There were 64 observations read from the data set WORK.D5.

NOTE: The data set WORK.LOWFBARGE has 64 observations and 18 variables.

NOTE: Compressing data set WORK.LOWFBARGE decreased size by 0.00
percent. 

      Compressed is 2 pages; un-compressed would require 2 pages.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

93                                                         The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 64 observations read from the data set WORK.LOWFBARGE.

NOTE: The data set WORK.LOWFBARGE has 64 observations and 18 variables.

NOTE: Compressing data set WORK.LOWFBARGE decreased size by 0.00
percent. 

      Compressed is 2 pages; un-compressed would require 2 pages.

NOTE: PROCEDURE SORT used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 128 observations read from the data set
WORK.HIGHFBARGE.

NOTE: The data set WORK.HIGHFBARGE has 128 observations and 23
variables.

NOTE: Compressing data set WORK.HIGHFBARGE decreased size by 33.33
percent. 

      Compressed is 2 pages; un-compressed would require 3 pages.

NOTE: PROCEDURE SORT used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The data set WORK.LOWFBARGE1 has 1 observations and 21 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.LOWFBARGE1.

NOTE: The data set WORK.LOWFBARGE2 has 21 observations and 3 variables.

NOTE: PROCEDURE TRANSPOSE used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Compression was disabled for data set TEMP3.LOWFBARGE3 because
compression overhead would increase the size of the data set.

NOTE: There were 21 observations read from the data set WORK.LOWFBARGE2.

NOTE: The data set TEMP3.LOWFBARGE3 has 11 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The data set WORK.HIGHFBARGE1 has 1 observations and 21 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

94                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.HIGHFBARGE1.

NOTE: The data set WORK.HIGHFBARGE2 has 21 observations and 3 variables.

NOTE: PROCEDURE TRANSPOSE used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Compression was disabled for data set TEMP3.HIGHFBARGE3 because
compression overhead would increase the size of the data set.

NOTE: There were 21 observations read from the data set
WORK.HIGHFBARGE2.

NOTE: The data set TEMP3.HIGHFBARGE3 has 11 observations and 1
variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

671        %boat(Freight Ships,FShips,fs);

NOTE: There were 333 observations read from the data set WORK.D1.

NOTE: The data set WORK.D2 has 37 observations and 8 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D3 created, with 37 rows and 10 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

95                                                         The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H2 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H3 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

96                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H4 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H5 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

97                                                         The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H6 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H7 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

98                                                         The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H8 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H9 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

99                                                         The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H10 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H11 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

100                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H12 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H13 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H14 has 1 observations and 4 variables.

101                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H15 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H16 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

102                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H17 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H18 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

103                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H19 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H20 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

104                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H21 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

105                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L2 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L3 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

106                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L4 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L5 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

107                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.L6 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L7 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L8 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

108                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L9 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L10 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

109                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L11 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L12 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

110                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L13 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L14 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

111                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L15 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L16 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.H1.

NOTE: The data set WORK.HH1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.L1.

NOTE: The data set WORK.LL1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

112                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH2 created, with 1 rows and 8 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL2 created, with 1 rows and 8 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH3 created, with 2 rows and 12 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL3 created, with 2 rows and 12 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH4 created, with 4 rows and 16 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL4 created, with 4 rows and 16 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH5 created, with 8 rows and 20 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

113                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL5 created, with 8 rows and 20 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH6 created, with 16 rows and 24 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL6 created, with 16 rows and 24 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH7 created, with 32 rows and 28 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL7 created, with 32 rows and 28 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH8 created, with 64 rows and 32 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL8 created, with 64 rows and 32 columns.

NOTE: PROCEDURE SQL used (Total process time):

114                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH9 created, with 128 rows and 36 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL9 created, with 128 rows and 36 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH10 created, with 256 rows and 40 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL10 created, with 256 rows and 40 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH11 created, with 512 rows and 44 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL11 created, with 512 rows and 44 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH12 created, with 1024 rows and 48 columns.

115                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL12 created, with 1024 rows and 48 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH13 created, with 1024 rows and 52 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL13 created, with 1024 rows and 52 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH14 created, with 1024 rows and 56 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL14 created, with 1024 rows and 56 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH15 created, with 1024 rows and 60 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

116                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL15 created, with 1024 rows and 60 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH16 created, with 1024 rows and 64 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL16 created, with 1024 rows and 64 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH17 created, with 1024 rows and 68 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH18 created, with 1024 rows and 72 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH19 created, with 1024 rows and 76 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH20 created, with 1024 rows and 80 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

117                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH21 created, with 2048 rows and 84 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Variable probability is uninitialized.

NOTE: Variable count is uninitialized.

NOTE: Variable cost is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      2048 at 671:167   2048 at 671:238   

NOTE: There were 2048 observations read from the data set WORK.HH21.

NOTE: The data set WORK.D4 has 2048 observations and 70 variables.

NOTE: Compressing data set WORK.D4 decreased size by 37.50 percent. 

      Compressed is 45 pages; un-compressed would require 72 pages.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: There were 2048 observations read from the data set WORK.D4.

NOTE: The data set WORK.HIGHFSHIPS has 2048 observations and 23
variables.

NOTE: Compressing data set WORK.HIGHFSHIPS decreased size by 53.13
percent. 

      Compressed is 15 pages; un-compressed would require 32 pages.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Variable count is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1024 at 671:164   

NOTE: There were 1024 observations read from the data set WORK.LL16.

NOTE: The data set WORK.D5 has 1024 observations and 53 variables.

NOTE: Compressing data set WORK.D5 decreased size by 35.71 percent. 

      Compressed is 18 pages; un-compressed would require 28 pages.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Variable practice_1_practice_16 is uninitialized.

NOTE: There were 1024 observations read from the data set WORK.D5.

NOTE: The data set WORK.LOWFSHIPS has 1024 observations and 18
variables.

118                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Compressing data set WORK.LOWFSHIPS decreased size by 47.37
percent. 

      Compressed is 10 pages; un-compressed would require 19 pages.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1024 observations read from the data set
WORK.LOWFSHIPS.

NOTE: The data set WORK.LOWFSHIPS has 1024 observations and 18
variables.

NOTE: Compressing data set WORK.LOWFSHIPS decreased size by 47.37
percent. 

      Compressed is 10 pages; un-compressed would require 19 pages.

NOTE: PROCEDURE SORT used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 2048 observations read from the data set
WORK.HIGHFSHIPS.

NOTE: The data set WORK.HIGHFSHIPS has 2048 observations and 23
variables.

NOTE: Compressing data set WORK.HIGHFSHIPS decreased size by 53.13
percent. 

      Compressed is 15 pages; un-compressed would require 32 pages.

NOTE: PROCEDURE SORT used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The data set WORK.LOWFSHIPS1 has 1 observations and 21 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.LOWFSHIPS1.

NOTE: The data set WORK.LOWFSHIPS2 has 21 observations and 3 variables.

NOTE: PROCEDURE TRANSPOSE used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Compression was disabled for data set TEMP3.LOWFSHIPS3 because
compression overhead would increase the size of the data set.

NOTE: There were 21 observations read from the data set WORK.LOWFSHIPS2.

NOTE: The data set TEMP3.LOWFSHIPS3 has 11 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The data set WORK.HIGHFSHIPS1 has 1 observations and 21 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

119                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.HIGHFSHIPS1.

NOTE: The data set WORK.HIGHFSHIPS2 has 21 observations and 3 variables.

NOTE: PROCEDURE TRANSPOSE used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Compression was disabled for data set TEMP3.HIGHFSHIPS3 because
compression overhead would increase the size of the data set.

NOTE: There were 21 observations read from the data set
WORK.HIGHFSHIPS2.

NOTE: The data set TEMP3.HIGHFSHIPS3 has 11 observations and 1
variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

672        %boat(Passenger Vessels,Pass,pv);

NOTE: There were 333 observations read from the data set WORK.D1.

NOTE: The data set WORK.D2 has 37 observations and 8 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D3 created, with 37 rows and 10 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

120                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H2 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H3 has 1 observations and 4 variables.

121                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H4 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H5 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

122                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H6 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H7 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

123                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H8 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H9 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

124                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H10 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H11 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

125                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H12 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H13 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

126                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H14 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H15 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

127                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.H16 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H17 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H18 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

128                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H19 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H20 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

129                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H21 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

130                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L2 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L3 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

131                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L4 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L5 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

132                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L6 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L7 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

133                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L8 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L9 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L10 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

134                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L11 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L12 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

135                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L13 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L14 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

136                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L15 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L16 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.H1.

NOTE: The data set WORK.HH1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.L1.

NOTE: The data set WORK.LL1 has 1 observations and 4 variables.

137                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH2 created, with 1 rows and 8 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL2 created, with 1 rows and 8 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH3 created, with 1 rows and 12 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL3 created, with 1 rows and 12 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH4 created, with 1 rows and 16 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL4 created, with 1 rows and 16 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

138                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Table WORK.HH5 created, with 1 rows and 20 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL5 created, with 1 rows and 20 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH6 created, with 2 rows and 24 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL6 created, with 2 rows and 24 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH7 created, with 2 rows and 28 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL7 created, with 2 rows and 28 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH8 created, with 2 rows and 32 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

139                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL8 created, with 2 rows and 32 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH9 created, with 4 rows and 36 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL9 created, with 4 rows and 36 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH10 created, with 4 rows and 40 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL10 created, with 4 rows and 40 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH11 created, with 4 rows and 44 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL11 created, with 4 rows and 44 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

140                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH12 created, with 8 rows and 48 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL12 created, with 8 rows and 48 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH13 created, with 8 rows and 52 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL13 created, with 8 rows and 52 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH14 created, with 8 rows and 56 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL14 created, with 8 rows and 56 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH15 created, with 8 rows and 60 columns.

141                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL15 created, with 8 rows and 60 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH16 created, with 8 rows and 64 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL16 created, with 8 rows and 64 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH17 created, with 8 rows and 68 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH18 created, with 8 rows and 72 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH19 created, with 8 rows and 76 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

142                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Table WORK.HH20 created, with 8 rows and 80 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH21 created, with 16 rows and 84 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.03 seconds

      cpu time            0.00 seconds

      

NOTE: Variable probability is uninitialized.

NOTE: Variable count is uninitialized.

NOTE: Variable cost is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      16 at 672:167   16 at 672:238   

NOTE: There were 16 observations read from the data set WORK.HH21.

NOTE: The data set WORK.D4 has 16 observations and 70 variables.

NOTE: Compressing data set WORK.D4 decreased size by 0.00 percent. 

      Compressed is 2 pages; un-compressed would require 2 pages.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 16 observations read from the data set WORK.D4.

NOTE: The data set WORK.HIGHPASS has 16 observations and 23 variables.

NOTE: Compressing data set WORK.HIGHPASS increased size by 100.00
percent. 

      Compressed is 2 pages; un-compressed would require 1 pages.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Variable count is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      8 at 672:164   

NOTE: There were 8 observations read from the data set WORK.LL16.

NOTE: The data set WORK.D5 has 8 observations and 53 variables.

NOTE: Compressing data set WORK.D5 increased size by 100.00 percent. 

      Compressed is 2 pages; un-compressed would require 1 pages.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

143                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Variable practice_1_practice_16 is uninitialized.

NOTE: There were 8 observations read from the data set WORK.D5.

NOTE: The data set WORK.LOWPASS has 8 observations and 18 variables.

NOTE: Compressing data set WORK.LOWPASS increased size by 100.00
percent. 

      Compressed is 2 pages; un-compressed would require 1 pages.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 8 observations read from the data set WORK.LOWPASS.

NOTE: The data set WORK.LOWPASS has 8 observations and 18 variables.

NOTE: Compressing data set WORK.LOWPASS increased size by 100.00
percent. 

      Compressed is 2 pages; un-compressed would require 1 pages.

NOTE: PROCEDURE SORT used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 16 observations read from the data set WORK.HIGHPASS.

NOTE: The data set WORK.HIGHPASS has 16 observations and 23 variables.

NOTE: Compressing data set WORK.HIGHPASS increased size by 100.00
percent. 

      Compressed is 2 pages; un-compressed would require 1 pages.

NOTE: PROCEDURE SORT used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The data set WORK.LOWPASS1 has 1 observations and 21 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.LOWPASS1.

NOTE: The data set WORK.LOWPASS2 has 21 observations and 3 variables.

NOTE: PROCEDURE TRANSPOSE used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Compression was disabled for data set TEMP3.LOWPASS3 because
compression overhead would increase the size of the data set.

NOTE: There were 21 observations read from the data set WORK.LOWPASS2.

NOTE: The data set TEMP3.LOWPASS3 has 11 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

144                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: The data set WORK.HIGHPASS1 has 1 observations and 21 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.HIGHPASS1.

NOTE: The data set WORK.HIGHPASS2 has 21 observations and 3 variables.

NOTE: PROCEDURE TRANSPOSE used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Compression was disabled for data set TEMP3.HIGHPASS3 because
compression overhead would increase the size of the data set.

NOTE: There were 21 observations read from the data set WORK.HIGHPASS2.

NOTE: The data set TEMP3.HIGHPASS3 has 11 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

673        %boat(Recreational Ships,Rec,rs);

NOTE: There were 333 observations read from the data set WORK.D1.

NOTE: The data set WORK.D2 has 37 observations and 8 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D3 created, with 37 rows and 10 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

145                                                        The SAS
System                            15:50 Friday, November 21, 2008

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H1 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H2 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

146                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H3 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H4 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

147                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H5 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H6 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

148                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.01 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H7 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H8 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

149                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H9 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H10 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

150                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H11 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H12 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

151                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H13 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H14 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

152                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H15 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H16 has 2 observations and 4 variables.

153                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H17 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

154                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H18 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H19 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

155                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H20 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H21 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

156                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L1 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L2 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

157                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L3 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L4 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

158                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L5 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L6 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

159                                                        The SAS
System                            15:50 Friday, November 21, 2008

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L7 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L8 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

160                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L9 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L10 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

161                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L11 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L12 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

162                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L13 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L14 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

163                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L15 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1 at 673:45   

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L16 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 2 observations read from the data set WORK.H1.

164                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.HH1 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 2 observations read from the data set WORK.L1.

NOTE: The data set WORK.LL1 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH2 created, with 4 rows and 8 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL2 created, with 4 rows and 8 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH3 created, with 8 rows and 12 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL3 created, with 8 rows and 12 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH4 created, with 16 rows and 16 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

165                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Table WORK.LL4 created, with 16 rows and 16 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH5 created, with 32 rows and 20 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL5 created, with 32 rows and 20 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH6 created, with 64 rows and 24 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL6 created, with 64 rows and 24 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH7 created, with 128 rows and 28 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL7 created, with 128 rows and 28 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

166                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH8 created, with 256 rows and 32 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL8 created, with 256 rows and 32 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH9 created, with 512 rows and 36 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL9 created, with 512 rows and 36 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH10 created, with 1024 rows and 40 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL10 created, with 1024 rows and 40 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH11 created, with 2048 rows and 44 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

167                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL11 created, with 2048 rows and 44 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH12 created, with 4096 rows and 48 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL12 created, with 4096 rows and 48 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH13 created, with 8192 rows and 52 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.06 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL13 created, with 8192 rows and 52 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH14 created, with 16384 rows and 56 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL14 created, with 16384 rows and 56 columns.

168                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH15 created, with 32768 rows and 60 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL15 created, with 32768 rows and 60 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH16 created, with 65536 rows and 64 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.07 seconds

      cpu time            0.07 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL16 created, with 65536 rows and 64 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.10 seconds

      cpu time            0.11 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH17 created, with 131072 rows and 68 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.21 seconds

      cpu time            0.21 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH18 created, with 262144 rows and 72 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.56 seconds

      cpu time            0.40 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

169                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Table WORK.HH19 created, with 524288 rows and 76 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           2.32 seconds

      cpu time            1.09 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH20 created, with 1048576 rows and 80 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           3.14 seconds

      cpu time            2.42 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH21 created, with 2097152 rows and 84 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           7.40 seconds

      cpu time            5.09 seconds

      

NOTE: Variable probability is uninitialized.

NOTE: Variable count is uninitialized.

NOTE: Variable cost is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      2097152 at 673:31    2097152 at 673:167   2097152 at 673:238   

NOTE: There were 2097152 observations read from the data set WORK.HH21.

NOTE: The data set WORK.D4 has 2097152 observations and 70 variables.

NOTE: Compressing data set WORK.D4 decreased size by 64.46 percent. 

      Compressed is 25701 pages; un-compressed would require 72317
pages.

NOTE: DATA statement used (Total process time):

      real time           10.37 seconds

      cpu time            9.71 seconds

      

NOTE: There were 2097152 observations read from the data set WORK.D4.

NOTE: The data set WORK.HIGHREC has 2097152 observations and 23
variables.

NOTE: Compressing data set WORK.HIGHREC decreased size by 66.35 percent.


      Compressed is 10693 pages; un-compressed would require 31776
pages.

NOTE: DATA statement used (Total process time):

      real time           10.45 seconds

      cpu time            9.92 seconds

      

NOTE: Variable count is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      65536 at 673:31    65536 at 673:164   65536 at 673:1     

170                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 65536 observations read from the data set WORK.LL16.

NOTE: The data set WORK.D5 has 65536 observations and 53 variables.

NOTE: Compressing data set WORK.D5 decreased size by 62.75 percent. 

      Compressed is 643 pages; un-compressed would require 1726 pages.

NOTE: DATA statement used (Total process time):

      real time           0.25 seconds

      cpu time            0.25 seconds

      

NOTE: Variable practice_1_practice_16 is uninitialized.

NOTE: There were 65536 observations read from the data set WORK.D5.

NOTE: The data set WORK.LOWREC has 65536 observations and 18 variables.

NOTE: Compressing data set WORK.LOWREC decreased size by 61.57 percent. 

      Compressed is 450 pages; un-compressed would require 1171 pages.

NOTE: DATA statement used (Total process time):

      real time           0.26 seconds

      cpu time            0.24 seconds

      

NOTE: There were 65536 observations read from the data set WORK.LOWREC.

NOTE: The data set WORK.LOWREC has 65536 observations and 18 variables.

NOTE: Compressing data set WORK.LOWREC decreased size by 61.57 percent. 

      Compressed is 450 pages; un-compressed would require 1171 pages.

NOTE: PROCEDURE SORT used (Total process time):

      real time           0.15 seconds

      cpu time            0.15 seconds

      

NOTE: There were 2097152 observations read from the data set
WORK.HIGHREC.

NOTE: The data set WORK.HIGHREC has 2097152 observations and 23
variables.

NOTE: Compressing data set WORK.HIGHREC decreased size by 66.35 percent.


      Compressed is 10693 pages; un-compressed would require 31776
pages.

NOTE: PROCEDURE SORT used (Total process time):

      real time           8.36 seconds

      cpu time            8.04 seconds

      

WARNING: There are no observations with valid WEIGHT/FREQ values in the
input data set.

NOTE: The data set WORK.LOWREC1 has 0 observations and 21 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           0.07 seconds

      cpu time            0.07 seconds

      

NOTE: There were 0 observations read from the data set WORK.LOWREC1.

NOTE: The data set WORK.LOWREC2 has 21 observations and 2 variables.

NOTE: PROCEDURE TRANSPOSE used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

171                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

WARNING: The variable rs_Cost in the DROP, KEEP, or RENAME list has
never been referenced.

NOTE: Compression was disabled for data set TEMP3.LOWREC3 because
compression overhead would increase the size of the data set.

WARNING: The variable rsC_1 in the DROP, KEEP, or RENAME list has never
been referenced.

NOTE: There were 21 observations read from the data set WORK.LOWREC2.

NOTE: The data set TEMP3.LOWREC3 has 11 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

WARNING: There are no observations with valid WEIGHT/FREQ values in the
input data set.

NOTE: The data set WORK.HIGHREC1 has 0 observations and 21 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           3.06 seconds

      cpu time            2.31 seconds

      

NOTE: There were 0 observations read from the data set WORK.HIGHREC1.

NOTE: The data set WORK.HIGHREC2 has 21 observations and 2 variables.

NOTE: PROCEDURE TRANSPOSE used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

WARNING: The variable rs_Cost in the DROP, KEEP, or RENAME list has
never been referenced.

NOTE: Compression was disabled for data set TEMP3.HIGHREC3 because
compression overhead would increase the size of the data set.

WARNING: The variable rsC_1 in the DROP, KEEP, or RENAME list has never
been referenced.

NOTE: There were 21 observations read from the data set WORK.HIGHREC2.

NOTE: The data set TEMP3.HIGHREC3 has 11 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

674        %boat(Tank Barges,TBarge,tb);

NOTE: There were 333 observations read from the data set WORK.D1.

NOTE: The data set WORK.D2 has 37 observations and 8 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D3 created, with 37 rows and 10 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

172                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H2 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

173                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H3 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H4 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

174                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H5 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H6 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

175                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H7 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H8 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

176                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H9 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H10 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

177                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H11 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H12 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H13 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

178                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H14 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H15 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

179                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H16 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H17 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

180                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H18 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H19 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

181                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H20 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H21 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

182                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L2 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

183                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L3 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L4 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L5 has 2 observations and 4 variables.

184                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L6 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L7 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

185                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L8 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L9 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

186                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L10 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L11 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

187                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L12 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L13 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

188                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L14 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L15 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

189                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L16 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.H1.

NOTE: The data set WORK.HH1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.L1.

NOTE: The data set WORK.LL1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH2 created, with 1 rows and 8 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL2 created, with 1 rows and 8 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH3 created, with 2 rows and 12 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL3 created, with 2 rows and 12 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

190                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH4 created, with 4 rows and 16 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL4 created, with 4 rows and 16 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH5 created, with 8 rows and 20 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL5 created, with 8 rows and 20 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH6 created, with 16 rows and 24 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL6 created, with 16 rows and 24 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH7 created, with 16 rows and 28 columns.

NOTE: PROCEDURE SQL used (Total process time):

191                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL7 created, with 16 rows and 28 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH8 created, with 16 rows and 32 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL8 created, with 16 rows and 32 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH9 created, with 32 rows and 36 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL9 created, with 32 rows and 36 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH10 created, with 32 rows and 40 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL10 created, with 32 rows and 40 columns.

192                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH11 created, with 32 rows and 44 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL11 created, with 32 rows and 44 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH12 created, with 64 rows and 48 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL12 created, with 64 rows and 48 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH13 created, with 64 rows and 52 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL13 created, with 64 rows and 52 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

193                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH14 created, with 64 rows and 56 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL14 created, with 64 rows and 56 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH15 created, with 64 rows and 60 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL15 created, with 64 rows and 60 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH16 created, with 64 rows and 64 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL16 created, with 64 rows and 64 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH17 created, with 64 rows and 68 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

194                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH18 created, with 64 rows and 72 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH19 created, with 64 rows and 76 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH20 created, with 64 rows and 80 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.56 seconds

      cpu time            0.14 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH21 created, with 128 rows and 84 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           1.82 seconds

      cpu time            0.32 seconds

      

NOTE: Variable probability is uninitialized.

NOTE: Variable count is uninitialized.

NOTE: Variable cost is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      128 at 674:167   128 at 674:238   

NOTE: There were 128 observations read from the data set WORK.HH21.

NOTE: The data set WORK.D4 has 128 observations and 70 variables.

NOTE: Compressing data set WORK.D4 decreased size by 20.00 percent. 

      Compressed is 4 pages; un-compressed would require 5 pages.

NOTE: DATA statement used (Total process time):

      real time           0.18 seconds

      cpu time            0.06 seconds

      

NOTE: There were 128 observations read from the data set WORK.D4.

NOTE: The data set WORK.HIGHTBARGE has 128 observations and 23
variables.

NOTE: Compressing data set WORK.HIGHTBARGE decreased size by 33.33
percent. 

195                                                        The SAS
System                            15:50 Friday, November 21, 2008

      Compressed is 2 pages; un-compressed would require 3 pages.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: Variable count is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      64 at 674:164   

NOTE: There were 64 observations read from the data set WORK.LL16.

NOTE: The data set WORK.D5 has 64 observations and 53 variables.

NOTE: Compressing data set WORK.D5 decreased size by 0.00 percent. 

      Compressed is 3 pages; un-compressed would require 3 pages.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Variable practice_1_practice_16 is uninitialized.

NOTE: There were 64 observations read from the data set WORK.D5.

NOTE: The data set WORK.LOWTBARGE has 64 observations and 18 variables.

NOTE: Compressing data set WORK.LOWTBARGE decreased size by 0.00
percent. 

      Compressed is 2 pages; un-compressed would require 2 pages.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: There were 64 observations read from the data set WORK.LOWTBARGE.

NOTE: The data set WORK.LOWTBARGE has 64 observations and 18 variables.

NOTE: Compressing data set WORK.LOWTBARGE decreased size by 0.00
percent. 

      Compressed is 2 pages; un-compressed would require 2 pages.

NOTE: PROCEDURE SORT used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 128 observations read from the data set
WORK.HIGHTBARGE.

NOTE: The data set WORK.HIGHTBARGE has 128 observations and 23
variables.

NOTE: Compressing data set WORK.HIGHTBARGE decreased size by 33.33
percent. 

      Compressed is 2 pages; un-compressed would require 3 pages.

NOTE: PROCEDURE SORT used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The data set WORK.LOWTBARGE1 has 1 observations and 21 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

196                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.LOWTBARGE1.

NOTE: The data set WORK.LOWTBARGE2 has 21 observations and 3 variables.

NOTE: PROCEDURE TRANSPOSE used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Compression was disabled for data set TEMP3.LOWTBARGE3 because
compression overhead would increase the size of the data set.

NOTE: There were 21 observations read from the data set WORK.LOWTBARGE2.

NOTE: The data set TEMP3.LOWTBARGE3 has 11 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The data set WORK.HIGHTBARGE1 has 1 observations and 21 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.HIGHTBARGE1.

NOTE: The data set WORK.HIGHTBARGE2 has 21 observations and 3 variables.

NOTE: PROCEDURE TRANSPOSE used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Compression was disabled for data set TEMP3.HIGHTBARGE3 because
compression overhead would increase the size of the data set.

NOTE: There were 21 observations read from the data set
WORK.HIGHTBARGE2.

NOTE: The data set TEMP3.HIGHTBARGE3 has 11 observations and 1
variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

675        %boat(Tank Ships,TShips,ts);

NOTE: There were 333 observations read from the data set WORK.D1.

NOTE: The data set WORK.D2 has 37 observations and 8 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

197                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D3 created, with 37 rows and 10 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H2 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

198                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H3 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H4 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

199                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H5 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H6 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

200                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H7 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H8 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

201                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H9 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H10 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

202                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H11 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H12 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

203                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H13 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H14 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H15 has 1 observations and 4 variables.

204                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H16 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H17 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

205                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H18 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H19 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

206                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H20 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H21 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

207                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L2 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

208                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L3 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L4 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

209                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L5 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L6 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

210                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.L7 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L8 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L9 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

211                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L10 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L11 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

212                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L12 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L13 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

213                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L14 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L15 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

214                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L16 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.H1.

NOTE: The data set WORK.HH1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.L1.

NOTE: The data set WORK.LL1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH2 created, with 1 rows and 8 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL2 created, with 1 rows and 8 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH3 created, with 2 rows and 12 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

215                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Table WORK.LL3 created, with 2 rows and 12 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH4 created, with 4 rows and 16 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL4 created, with 4 rows and 16 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH5 created, with 8 rows and 20 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL5 created, with 8 rows and 20 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH6 created, with 16 rows and 24 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL6 created, with 16 rows and 24 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

216                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH7 created, with 32 rows and 28 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL7 created, with 32 rows and 28 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH8 created, with 64 rows and 32 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL8 created, with 64 rows and 32 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH9 created, with 128 rows and 36 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL9 created, with 128 rows and 36 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH10 created, with 256 rows and 40 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

217                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL10 created, with 256 rows and 40 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH11 created, with 512 rows and 44 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL11 created, with 512 rows and 44 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH12 created, with 1024 rows and 48 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL12 created, with 1024 rows and 48 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH13 created, with 1024 rows and 52 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL13 created, with 1024 rows and 52 columns.

218                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH14 created, with 1024 rows and 56 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL14 created, with 1024 rows and 56 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH15 created, with 1024 rows and 60 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL15 created, with 1024 rows and 60 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH16 created, with 1024 rows and 64 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL16 created, with 1024 rows and 64 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

219                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Table WORK.HH17 created, with 1024 rows and 68 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH18 created, with 1024 rows and 72 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH19 created, with 1024 rows and 76 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH20 created, with 1024 rows and 80 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH21 created, with 2048 rows and 84 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Variable probability is uninitialized.

NOTE: Variable count is uninitialized.

NOTE: Variable cost is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      2048 at 675:167   2048 at 675:238   

NOTE: There were 2048 observations read from the data set WORK.HH21.

NOTE: The data set WORK.D4 has 2048 observations and 70 variables.

NOTE: Compressing data set WORK.D4 decreased size by 37.50 percent. 

      Compressed is 45 pages; un-compressed would require 72 pages.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

220                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 2048 observations read from the data set WORK.D4.

NOTE: The data set WORK.HIGHTSHIPS has 2048 observations and 23
variables.

NOTE: Compressing data set WORK.HIGHTSHIPS decreased size by 53.13
percent. 

      Compressed is 15 pages; un-compressed would require 32 pages.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Variable count is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1024 at 675:164   

NOTE: There were 1024 observations read from the data set WORK.LL16.

NOTE: The data set WORK.D5 has 1024 observations and 53 variables.

NOTE: Compressing data set WORK.D5 decreased size by 35.71 percent. 

      Compressed is 18 pages; un-compressed would require 28 pages.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Variable practice_1_practice_16 is uninitialized.

NOTE: There were 1024 observations read from the data set WORK.D5.

NOTE: The data set WORK.LOWTSHIPS has 1024 observations and 18
variables.

NOTE: Compressing data set WORK.LOWTSHIPS decreased size by 47.37
percent. 

      Compressed is 10 pages; un-compressed would require 19 pages.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1024 observations read from the data set
WORK.LOWTSHIPS.

NOTE: The data set WORK.LOWTSHIPS has 1024 observations and 18
variables.

NOTE: Compressing data set WORK.LOWTSHIPS decreased size by 47.37
percent. 

      Compressed is 10 pages; un-compressed would require 19 pages.

NOTE: PROCEDURE SORT used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 2048 observations read from the data set
WORK.HIGHTSHIPS.

NOTE: The data set WORK.HIGHTSHIPS has 2048 observations and 23
variables.

NOTE: Compressing data set WORK.HIGHTSHIPS decreased size by 53.13
percent. 

      Compressed is 15 pages; un-compressed would require 32 pages.

NOTE: PROCEDURE SORT used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

221                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: The data set WORK.LOWTSHIPS1 has 1 observations and 21 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.LOWTSHIPS1.

NOTE: The data set WORK.LOWTSHIPS2 has 21 observations and 3 variables.

NOTE: PROCEDURE TRANSPOSE used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Compression was disabled for data set TEMP3.LOWTSHIPS3 because
compression overhead would increase the size of the data set.

NOTE: There were 21 observations read from the data set WORK.LOWTSHIPS2.

NOTE: The data set TEMP3.LOWTSHIPS3 has 11 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The data set WORK.HIGHTSHIPS1 has 1 observations and 21 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.HIGHTSHIPS1.

NOTE: The data set WORK.HIGHTSHIPS2 has 21 observations and 3 variables.

NOTE: PROCEDURE TRANSPOSE used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Compression was disabled for data set TEMP3.HIGHTSHIPS3 because
compression overhead would increase the size of the data set.

NOTE: There were 21 observations read from the data set
WORK.HIGHTSHIPS2.

NOTE: The data set TEMP3.HIGHTSHIPS3 has 11 observations and 1
variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

676        %boat(Utility Vessels,Utility,ut);

NOTE: There were 333 observations read from the data set WORK.D1.

NOTE: The data set WORK.D2 has 37 observations and 8 variables.

222                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D3 created, with 37 rows and 10 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

223                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H2 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H3 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H4 has 2 observations and 4 variables.

224                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H5 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H6 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

225                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H7 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H8 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

226                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H9 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H10 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

227                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.26 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H11 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H12 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

228                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H13 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H14 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

229                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H15 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H16 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

230                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.H17 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H18 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H19 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

231                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H20 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.H21 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

232                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L2 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

233                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L3 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L4 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

234                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L5 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L6 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

235                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L7 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L8 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

236                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L9 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L10 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L11 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

237                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L12 has 2 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L13 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

238                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L14 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L15 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X1 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

239                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: There were 37 observations read from the data set WORK.D3.

NOTE: The data set WORK.X2 has 1 observations and 14 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.X1.

NOTE: There were 1 observations read from the data set WORK.X2.

NOTE: The data set WORK.L16 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.H1.

NOTE: The data set WORK.HH1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.L1.

NOTE: The data set WORK.LL1 has 1 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH2 created, with 1 rows and 8 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL2 created, with 1 rows and 8 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH3 created, with 2 rows and 12 columns.

NOTE: PROCEDURE SQL used (Total process time):

240                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL3 created, with 2 rows and 12 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH4 created, with 4 rows and 16 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL4 created, with 4 rows and 16 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH5 created, with 8 rows and 20 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL5 created, with 8 rows and 20 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH6 created, with 16 rows and 24 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL6 created, with 16 rows and 24 columns.

241                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH7 created, with 32 rows and 28 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL7 created, with 32 rows and 28 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH8 created, with 64 rows and 32 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL8 created, with 64 rows and 32 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH9 created, with 128 rows and 36 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL9 created, with 128 rows and 36 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

242                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH10 created, with 256 rows and 40 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL10 created, with 256 rows and 40 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH11 created, with 512 rows and 44 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL11 created, with 512 rows and 44 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH12 created, with 1024 rows and 48 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL12 created, with 1024 rows and 48 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH13 created, with 1024 rows and 52 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

243                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL13 created, with 1024 rows and 52 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH14 created, with 1024 rows and 56 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL14 created, with 1024 rows and 56 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH15 created, with 1024 rows and 60 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL15 created, with 1024 rows and 60 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH16 created, with 1024 rows and 64 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.LL16 created, with 1024 rows and 64 columns.

NOTE: PROCEDURE SQL used (Total process time):

244                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.12 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH17 created, with 1024 rows and 68 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH18 created, with 1024 rows and 72 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH19 created, with 1024 rows and 76 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH20 created, with 1024 rows and 80 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The execution of this query involves performing one or more
Cartesian product joins that can not be optimized.

NOTE: Table WORK.HH21 created, with 2048 rows and 84 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.12 seconds

      cpu time            0.00 seconds

      

NOTE: Variable probability is uninitialized.

NOTE: Variable count is uninitialized.

NOTE: Variable cost is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      2048 at 676:167   2048 at 676:238   

NOTE: There were 2048 observations read from the data set WORK.HH21.

NOTE: The data set WORK.D4 has 2048 observations and 70 variables.

NOTE: Compressing data set WORK.D4 decreased size by 37.50 percent. 

245                                                        The SAS
System                            15:50 Friday, November 21, 2008

      Compressed is 45 pages; un-compressed would require 72 pages.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 2048 observations read from the data set WORK.D4.

NOTE: The data set WORK.HIGHUTILITY has 2048 observations and 23
variables.

NOTE: Compressing data set WORK.HIGHUTILITY decreased size by 53.13
percent. 

      Compressed is 15 pages; un-compressed would require 32 pages.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Variable count is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1024 at 676:164   

NOTE: There were 1024 observations read from the data set WORK.LL16.

NOTE: The data set WORK.D5 has 1024 observations and 53 variables.

NOTE: Compressing data set WORK.D5 decreased size by 35.71 percent. 

      Compressed is 18 pages; un-compressed would require 28 pages.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Variable practice_1_practice_16 is uninitialized.

NOTE: There were 1024 observations read from the data set WORK.D5.

NOTE: The data set WORK.LOWUTILITY has 1024 observations and 18
variables.

NOTE: Compressing data set WORK.LOWUTILITY decreased size by 47.37
percent. 

      Compressed is 10 pages; un-compressed would require 19 pages.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1024 observations read from the data set
WORK.LOWUTILITY.

NOTE: The data set WORK.LOWUTILITY has 1024 observations and 18
variables.

NOTE: Compressing data set WORK.LOWUTILITY decreased size by 47.37
percent. 

      Compressed is 10 pages; un-compressed would require 19 pages.

NOTE: PROCEDURE SORT used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 2048 observations read from the data set
WORK.HIGHUTILITY.

NOTE: The data set WORK.HIGHUTILITY has 2048 observations and 23
variables.

246                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Compressing data set WORK.HIGHUTILITY decreased size by 53.13
percent. 

      Compressed is 15 pages; un-compressed would require 32 pages.

NOTE: PROCEDURE SORT used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The data set WORK.LOWUTILITY1 has 1 observations and 21 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.LOWUTILITY1.

NOTE: The data set WORK.LOWUTILITY2 has 21 observations and 3 variables.

NOTE: PROCEDURE TRANSPOSE used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Compression was disabled for data set TEMP3.LOWUTILITY3 because
compression overhead would increase the size of the data set.

NOTE: There were 21 observations read from the data set
WORK.LOWUTILITY2.

NOTE: The data set TEMP3.LOWUTILITY3 has 11 observations and 1
variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The data set WORK.HIGHUTILITY1 has 1 observations and 21
variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set
WORK.HIGHUTILITY1.

NOTE: The data set WORK.HIGHUTILITY2 has 21 observations and 3
variables.

NOTE: PROCEDURE TRANSPOSE used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Compression was disabled for data set TEMP3.HIGHUTILITY3 because
compression overhead would increase the size of the data set.

NOTE: There were 21 observations read from the data set
WORK.HIGHUTILITY2.

NOTE: The data set TEMP3.HIGHUTILITY3 has 11 observations and 1
variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

247                                                        The SAS
System                            15:50 Friday, November 21, 2008

677        

678        

679        

680        %macro NAICS2(vt,sdf,sff,sdp,sif,sip,sss,sph,smc,sns,sot,

681        dd1,dd1a,dd1b,dd2,dd3,dd4,dd5,dd6,dd7,dd8,dd9,dd10,

682        wgt1,wgt2,wgt3,wgt4,wgt5,wgt6,wgt7,wgt8,wgt9,wgt10,wgt11);

683        %macro percentiles2(ty);

684        

685        PROC DATASETS LIBRARY=work   MEMTYPE=DATA    KILL nolist;

686        QUIT;

687        proc datasets nolist;

688        copy in=temp3 out=work;

689        quit;

690        run;

691        PROC DATASETS LIBRARY=temp   MEMTYPE=DATA    KILL nolist;

692        QUIT;

693        

694        &sff		proc sql; *11411	Fin fishing, shell fishing, and other
commercial fishing;

695        &sff		create table TEMP.&ty._FF as select

696        &sff				"11411" as NAICS format=$20.,

697        &sff				&ty.Comm3.*

698        &sff			from &ty.Comm3;

699        &sff		quit;

700        

701        &sph		proc sql; *488310	Port and harbor operations;

702        &sph		create table TEMP.&ty._PH as select

703        &sph				"488310" as NAICS format=$20.,

704        &sph				&ty.Utility3.*

705        &sph			from &ty.Utility3;

706        &sph		quit;

707        

708        %macro loopit(in1,in2,top,out);

709        PROC DATASETS LIBRARY=work   MEMTYPE=DATA nolist;

710        delete n &out;

711        QUIT;

712        %do j=1 %to &top;

713        data n;

714        	set &in2;

715        	if _N_=&j;

716        run;

717        data a&j;

718        	if _n_=1 then set n;

719        	set &in1;

720        run;

721        proc append base=&out  data=a&j;

722        run;

723        PROC DATASETS LIBRARY=work   MEMTYPE=DATA nolist;

724        delete a&j;

725        QUIT;

726        %end;

727        %mend;

728        

729        &dd1.loopit(&ty.Pass3,&ty.Utility3			,&samp.,d1);

248                                                        The SAS
System                            15:50 Friday, November 21, 2008

730        &dd1a.loopit(d1,&ty.Fbarge3					,&samp.,d1a);

731        &dd1b.loopit(d1,&ty.Tbarge3					,&samp.,d1b);

732        &dd7.loopit(d1,&ty.cruise3					,&samp.,d7);

733        

734        &sip		data TEMP.&ty._IP;*483212	Inland waterways passenger
transportation and Other water trans;

735        &sip			set d1;

736        &sip				format NAICS $20.0;

737        &sip					NAICS="483212";

738        &sip		run;

739        

740        *delete d1;

741        PROC DATASETS LIBRARY=work   MEMTYPE=DATA nolist;

742        delete d1;

743        QUIT;

744        

745        &dd2.loopit(d1a,&ty.FShips3					,&samp.,d2);

746        

747        *delete d1a;

748        PROC DATASETS LIBRARY=work   MEMTYPE=DATA nolist;

749        delete d1a;

750        QUIT;

751        

752        &dd6.loopit(d1b,&ty.rec3					,&samp.,d6);

753        

754        *delete d1b;

755        PROC DATASETS LIBRARY=work   MEMTYPE=DATA nolist;

756        delete d1b;

757        QUIT;

758        

759        &sdp		data TEMP.&ty._DP;*483112/483114	Deep Sea/Coastal and
Great Lakes Passenger;

760        &sdp			set d7;

761        &sdp				format NAICS $20.0;

762        &sdp					NAICS="483112/483114";

763        &sdp		run;

764        

765        *delete d7;

766        PROC DATASETS LIBRARY=work   MEMTYPE=DATA nolist;

767        delete d7;

768        QUIT;

769        &sss		data TEMP.&ty._SS;*487210	Scenic and Sightseeing
Transportation, Water;

770        &sss			set d2;

771        &sss				format NAICS $20.0;

772        &sss					NAICS="487210";

773        &sss		run;

774        

775        &dd3.loopit(d2,&ty.Tbarge3					,&samp.,d3);

776        

777        *delete d2;

778        PROC DATASETS LIBRARY=work   MEMTYPE=DATA nolist;

779        delete d2;

780        QUIT;

781        

782        &dd9.loopit(d6,&ty.fSHIPS3					,&samp.,d9);

783        &dd10.loopit(d6,&ty.fbarge3					,&samp.,d10);

249                                                        The SAS
System                            15:50 Friday, November 21, 2008

784        

785        *delete d6;

786        PROC DATASETS LIBRARY=work   MEMTYPE=DATA nolist;

787        delete d6;

788        QUIT;

789        

790        &dd4.loopit(d3,&ty.COMM3					,&samp.,d4);

791        &dd8.loopit(d3,&ty.TSHIPS3					,&samp.,d8);

792        

793        *delete d3;

794        PROC DATASETS LIBRARY=work   MEMTYPE=DATA nolist;

795        delete d3;

796        QUIT;

797        

798        &sot		data TEMP.&ty._OT;*488390	Other support activities for
water transportation;

799        &sot			set d9;

800        &sot				format NAICS $20.0;

801        &sot					NAICS="488390";

802        &sot		run;

803        

804        *delete d9;

805        PROC DATASETS LIBRARY=work   MEMTYPE=DATA nolist;

806        delete d9;

807        QUIT;

808        

809        &sns		data TEMP.&ty._NS;*488330	Navigational services to
shipping and salvage;

810        &sns			set d10;

811        &sns				format NAICS $20.0;

812        &sns					NAICS="488330";

813        &sns		run;

814        

815        *delete d10;

816        PROC DATASETS LIBRARY=work   MEMTYPE=DATA nolist;

817        delete d10;

818        QUIT;

819        

820        &smc	data TEMP.&ty._MC;*488320	Marine cargo handling;

821        &smc			set d4;

822        &smc				format NAICS $20.0;

823        &smc					NAICS="488320";

824        &smc		run;

825        

826        &dd5.loopit(d4,&ty.TSHIPS3					,&samp.,d5);

827        

828        *delete d4;

829        PROC DATASETS LIBRARY=work   MEMTYPE=DATA nolist;

830        delete d4;

831        QUIT;

832        

833        &sdf		data TEMP.&ty._DF;*483111/483113	Deep Sea/Coastal and
Great Lakes Freight;

834        &sdf			set d8;

835        &sdf				format NAICS $20.0;

836        &sdf					NAICS="483111/483113";

837        &sdf		run;

250                                                        The SAS
System                            15:50 Friday, November 21, 2008

838        

839        *delete d8;

840        PROC DATASETS LIBRARY=work   MEMTYPE=DATA nolist;

841        delete d8;

842        QUIT;

843        

844        &sif		data TEMP.&ty._IF; *483211 Inland waterways freight
transportation and towing transportation;

845        &sif			set d5;

846        &sif				format NAICS $20.0;

847        &sif					NAICS="488320";

848        &sif		run;

849        

850        *delete d5;

851        PROC DATASETS LIBRARY=work   MEMTYPE=DATA nolist;

852        delete d5;

853        QUIT;

854        

855        %mend percentiles2;

856        %percentiles2(&ptiles);

857        

858        

859        *ADD DOCUMENTATION!!;

860        %macro percentiles3(ty);

861        PROC DATASETS LIBRARY=work   MEMTYPE=DATA    KILL nolist;

862        QUIT;

863        

864        proc sql;

865        		create table large2 as select

866        			large.*,

867        		
n4.cs_percent,n4.cf_percent,n4.fb_percent,n4.fs_percent,n4.pv_percent,n4
.rs_percent,

868        			n4.tb_percent,n4.ts_percent,n4.ut_percent

869        		from temp.&TY._&vt. as large left join temp2.n4 as n4 on

870        		n4.NAICS=large.NAICS;

871        quit;

872        

873        data large3;

874        	set large2;

875        		cost=	sum(cs_percent*cs_cost,

876        				cf_percent*cf_cost,

877        				fb_percent*fb_cost,

878        				fs_percent*fs_cost,

879        				pv_percent*pv_cost,

880        				rs_percent*rs_cost,

881        				tb_percent*tb_cost,

882        				ts_percent*ts_cost,

883        				ut_percent*ut_cost);

884        run;

885        PROC DATASETS LIBRARY=work   MEMTYPE=DATA nolist;

886        delete large2;

887        QUIT;

888        proc sql;

889        	create table large3a as select

890        		large3.*,

891        			m.m1,m.m2,m.m3,m.m4,m.m5,m.m6,m.m7,m.m8,m.m9,m.m10,m.m11

251                                                        The SAS
System                            15:50 Friday, November 21, 2008

892        		from large3 left join temp2.num as m on

893        		large3.NAICS=m.NAICS;

894        quit;

895        PROC DATASETS LIBRARY=work   MEMTYPE=DATA nolist;

896        delete large3;

897        QUIT;

898        data large3b;

899        	set large3a;

900        		array mult(11) m1-m11;

901        		array acost(11) acost1-acost11;

902        		DO I=1 TO 11;

903        			acost(i)=cost*mult(i);

904        		END;

905        run;

906        PROC DATASETS LIBRARY=work   MEMTYPE=DATA nolist;

907        delete large3a;

908        QUIT;

909        proc sql;

910        	create table large4 as select

911        	
l.acost1,l.acost2,l.acost3,l.acost4,l.acost5,l.acost6,l.acost7,l.acost8,
l.acost9,l.acost10,l.acost11,

912        		t.*

913        	from large3b as l left join temp2.th2 as t

914        	on t.NAICS=l.NAICS;

915        quit;

916        data temp4.large4;

917        	set large4;

918        run;

919        PROC DATASETS LIBRARY=work   MEMTYPE=DATA nolist;

920        delete large3b;

921        QUIT;

922        

923        %macro reshapit;

924        %do l=1 %to 11;

925        data l&l (keep=Xweight acost);

926        	set large4;

927        		acost=acost&l;

928        		if		"&l"="1" then Xweight=&wgt1;

929        		else if "&l"="2" then Xweight=&wgt2;

930        		else if "&l"="3" then Xweight=&wgt3;

931        		else if "&l"="4" then Xweight=&wgt4;

932        		else if "&l"="5" then Xweight=&wgt5;

933        		else if "&l"="6" then Xweight=&wgt6;

934        		else if "&l"="7" then Xweight=&wgt7;

935        		else if "&l"="8" then Xweight=&wgt8;

936        		else if "&l"="9" then Xweight=&wgt9;

937        		else if "&l"="10" then Xweight=&wgt10;

938        		else if "&l"="11" then Xweight=&wgt11;

939        run;

940        %end;

941        %mend;

942        %reshapit;

943        data l;

944        	set l1 l2 l3 l4 l5 l6 l7 l8 l9 l10 l11;

945        run;

252                                                        The SAS
System                            15:50 Friday, November 21, 2008

946        

947        PROC DATASETS LIBRARY=work   MEMTYPE=DATA nolist;

948        delete l1 l2 l3 l4 l5 l6 l7 l8 l9 l10 l11;

949        QUIT;

950        	proc sort data=l; by acost; run;

951        proc univariate data=l noprint;

952        			weight Xweight;

953        			output out=temp4.&ptiles._&vt. PCTLPRE=P_

954        				PCTLPTS= 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
20 21 22 23 24

955        25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44
45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

956        61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99

957        				Min=P_0 Max=P_100 MEAN=P_A;

958        			var acost;

959        run;

960        

961        PROC DATASETS LIBRARY=work   MEMTYPE=DATA nolist;

962        delete l;

963        QUIT;

964        

965        data large5;

966        	set large4;

967        		array D(11) D1-D11;

968        		array O(11) O1-O11;

969        		array T(11) T1-T11;

970        		array acost(11) acost1-acost11;

971        			do i=1 to 11;

972        				if T(i)=. and O(i)~=. then put "flag 1";

973        				if O(i)=. and T(i)~=. then put "flag 2";

974        				if T(i)=. then 				D(i)=.;

975        				else if	acost(i)>T(i) then 	D(i)=3;

976        				else if	acost(i)>O(i) then	D(i)=1;

977        				else 						D(i)=0;

978        			end;

979        run;

980        

981        PROC DATASETS LIBRARY=work   MEMTYPE=DATA nolist;

982        delete large4;

983        QUIT;

984        

985        %macro loopdum;

986        %do k=1 %to 11;

987        	proc sql;

988        			create table x as select

989        			NAICS,D&k ,

990        			count(NAICS) as Count&k

991        			from large5 group by NAICS,D&k;

992        

993        			create table d&k as select

994        			NAICS,D&k as D,

995        			count&k/sum(count&k) as percent&k format=percent8.2

996        			from x group by NAICS order by NAICS,D;

997        	quit;

998        %end;

999        %mend;

253                                                        The SAS
System                            15:50 Friday, November 21, 2008

1000       %loopdum;

1001       

1002       %macro loopdum2;

1003       %do k=1 %to 11;

1004       	proc sort data=large5 out=x1; by NAICS D&k; run;

1005       	data x2;

1006       		set x1 (keep=NAICS d&k);

1007       			by NAICS D&k;

1008       				if first.d&k then count&k=1;

1009       					else count&k+1;

1010       				if last.D&k;

1011       	run;

1012       	data max (keep=obs);

1013       		set x1 end=last;

1014       			obs=_n_;

1015       			if last;

1016       	run;

1017       	data d&k (drop=count&k);

1018        		if _n_=1 then set max;

1019        		set x2;

1020       			rename d&k=d;

1021       			percent&k=count&k/obs;

1022        	run;

1023       %end;

1024       %mend;

1025       *%loopdum2;

1026       PROC DATASETS LIBRARY=work   MEMTYPE=DATA nolist;

1027       delete large5;

1028       QUIT;

1029       data temp.&ty.outdata_&vt.;

1030       	merge d1 d2 d3 d4 d5 d6 d7 d8 d9 d10 d11;

1031       	by NAICS D;

1032       	if d=0 | d=1 | d=3;

1033       run;

1034      
%export(temp.&ty.outdata_&vt.,&output.,&ty.thresholds_&vt..csv);

1035       %export(temp4.&ptiles._&vt.,&output2.,&ptiles._&vt..csv);

1036       *%export(temp4.&ptiles._&vt.,&output3.,&ptiles._&vt..csv);

1037       %mend;

1038       %percentiles3(&ptiles);

1039       %mend;

1040       

1041       %macro ptiles(ptiles);

1042       %NAICS2(vt=DF,sdf=
,sff=*,sdp=*,sif=*,sip=*,sss=*,sph=*,smc=*,sns=*,sot=*,

1043      
dd1=%,dd1a=%,dd1b=*,dd2=%,dd3=%,dd4=*,dd5=*,dd6=*,dd7=*,dd8=%,dd9=*,dd10
=*,

1044      
wgt1=0.049,wgt2=0.149,wgt3=0.116,wgt4=0.175,wgt5=0.175,wgt6=0.102,wgt7=0
.114,wgt8=0.074,wgt9=0.047,wgt10=0,wgt11=0);

1045       

1046       %NAICS2(vt=FF,sdf=*,sff=
,sdp=*,sif=*,sip=*,sss=*,sph=*,smc=*,sns=*,sot=*,

1047      
dd1=*,dd1a=*,dd1b=*,dd2=*,dd3=*,dd4=*,dd5=*,dd6=*,dd7=*,dd8=*,dd9=*,dd10
=*,

1048      
wgt1=0.286,wgt2=0.481,wgt3=0.118,wgt4=0.089,wgt5=0.014,wgt6=0.012,wgt7=0
,wgt8=0,wgt9=0,wgt10=0,wgt11=0);

1049       

1050       %NAICS2(vt=DP,sdf=*,sff=*,sdp=
,sif=*,sip=*,sss=*,sph=*,smc=*,sns=*,sot=*,

1051      
dd1=%,dd1a=*,dd1b=*,dd2=*,dd3=*,dd4=*,dd5=*,dd6=*,dd7=%,dd8=*,dd9=*,dd10
=*,

1052      
wgt1=0.134,wgt2=0.197,wgt3=0.142,wgt4=0.079,wgt5=0.205,wgt6=0.142,wgt7=0
.102,wgt8=0,wgt9=0,wgt10=0,wgt11=0);

1053       

254                                                        The SAS
System                            15:50 Friday, November 21, 2008

1054       %NAICS2(vt=IF,sdf=*,sff=*,sdp=*,sif=
,sip=*,sss=*,sph=*,smc=*,sns=*,sot=*,

1055      
dd1=%,dd1a=%,dd1b=*,dd2=%,dd3=%,dd4=%,dd5=%,dd6=*,dd7=*,dd8=*,dd9=*,dd10
=*,

1056      
wgt1=0.109,wgt2=0.126,wgt3=0.131,wgt4=0.262,wgt5=0.169,wgt6=0,wgt7=0.115
,wgt8=0.087,wgt9=0,wgt10=0,wgt11=0);

1057       

1058       %NAICS2(vt=IP,sdf=*,sff=*,sdp=*,sif=*,sip=
,sss=*,sph=*,smc=*,sns=*,sot=*,

1059      
dd1=%,dd1a=*,dd1b=*,dd2=*,dd3=*,dd4=*,dd5=*,dd6=*,dd7=*,dd8=*,dd9=*,dd10
=*,

1060      
wgt1=0.121,wgt2=0.287,wgt3=0.21,wgt4=0.172,wgt5=0.146,wgt6=0.064,wgt7=0,
wgt8=0,wgt9=0,wgt10=0,wgt11=0);

1061       

1062       %NAICS2(vt=SS,sdf=*,sff=*,sdp=*,sif=*,sip=*,sss=
,sph=*,smc=*,sns=*,sot=*,

1063      
dd1=%,dd1a=%,dd1b=*,dd2=%,dd3=*,dd4=*,dd5=*,dd6=*,dd7=*,dd8=*,dd9=*,dd10
=*,

1064      
wgt1=0.258,wgt2=0.273,wgt3=0.199,wgt4=0.127,wgt5=0.084,wgt6=0.039,wgt7=0
.021,wgt8=0,wgt9=0,wgt10=0,wgt11=0);

1065       

1066       %NAICS2(vt=PH,sdf=*,sff=*,sdp=*,sif=*,sip=*,sss=*,sph=
,smc=*,sns=*,sot=*,

1067      
dd1=*,dd1a=*,dd1b=*,dd2=*,dd3=*,dd4=*,dd5=*,dd6=*,dd7=*,dd8=*,dd9=*,dd10
=*,

1068      
wgt1=0.098,wgt2=0.098,wgt3=0.154,wgt4=0.146,wgt5=0.203,wgt6=0.146,wgt7=0
,wgt8=0.106,wgt9=0.024,wgt10=0.024,wgt11=0);

1069       

1070       %NAICS2(vt=MC,sdf=*,sff=*,sdp=*,sif=*,sip=*,sss=*,sph=*,smc=
,sns=*,sot=*,

1071      
dd1=%,dd1a=%,dd1b=*,dd2=%,dd3=%,dd4=%,dd5=*,dd6=*,dd7=*,dd8=*,dd9=*,dd10
=*,

1072      
wgt1=0.068,wgt2=0.127,wgt3=0.094,wgt4=0.143,wgt5=0.179,wgt6=0.134,wgt7=0
.104,wgt8=0.078,wgt9=0.036,wgt10=0,wgt11=0);

1073       

1074      
%NAICS2(vt=NS,sdf=*,sff=*,sdp=*,sif=*,sip=*,sss=*,sph=*,smc=*,sns=
,sot=*,

1075      
dd1=%,dd1a=*,dd1b=%,dd2=*,dd3=*,dd4=*,dd5=*,dd6=%,dd7=*,dd8=*,dd9=*,dd10
=%,

1076      
wgt1=0.085,wgt2=0.225,wgt3=0.234,wgt4=0.147,wgt5=0.135,wgt6=0.079,wgt7=0
.056,wgt8=0.04,wgt9=0,wgt10=0,wgt11=0);

1077       

1078      
%NAICS2(vt=OT,sdf=*,sff=*,sdp=*,sif=*,sip=*,sss=*,sph=*,smc=*,sns=*,sot=
,

1079      
dd1=%,dd1a=*,dd1b=%,dd2=*,dd3=*,dd4=*,dd5=*,dd6=%,dd7=*,dd8=*,dd9=%,dd10
=*,

1080      
wgt1=0.26,wgt2=0.28,wgt3=0.126,wgt4=0.167,wgt5=0.13,wgt6=0,wgt7=0,wgt8=0
.037,wgt9=0,wgt10=0,wgt11=0);

1081       

1082       %mend;

1083       %ptiles(Low);

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: Deleting WORK.D2 (memtype=DATA).

NOTE: Deleting WORK.D3 (memtype=DATA).

NOTE: Deleting WORK.D4 (memtype=DATA).

NOTE: Deleting WORK.D5 (memtype=DATA).

NOTE: Deleting WORK.H1 (memtype=DATA).

NOTE: Deleting WORK.H10 (memtype=DATA).

NOTE: Deleting WORK.H11 (memtype=DATA).

NOTE: Deleting WORK.H12 (memtype=DATA).

NOTE: Deleting WORK.H13 (memtype=DATA).

NOTE: Deleting WORK.H14 (memtype=DATA).

NOTE: Deleting WORK.H15 (memtype=DATA).

NOTE: Deleting WORK.H16 (memtype=DATA).

NOTE: Deleting WORK.H17 (memtype=DATA).

NOTE: Deleting WORK.H18 (memtype=DATA).

NOTE: Deleting WORK.H19 (memtype=DATA).

NOTE: Deleting WORK.H2 (memtype=DATA).

NOTE: Deleting WORK.H20 (memtype=DATA).

NOTE: Deleting WORK.H21 (memtype=DATA).

NOTE: Deleting WORK.H3 (memtype=DATA).

NOTE: Deleting WORK.H4 (memtype=DATA).

NOTE: Deleting WORK.H5 (memtype=DATA).

NOTE: Deleting WORK.H6 (memtype=DATA).

NOTE: Deleting WORK.H7 (memtype=DATA).

255                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.H8 (memtype=DATA).

NOTE: Deleting WORK.H9 (memtype=DATA).

NOTE: Deleting WORK.HH1 (memtype=DATA).

NOTE: Deleting WORK.HH10 (memtype=DATA).

NOTE: Deleting WORK.HH11 (memtype=DATA).

NOTE: Deleting WORK.HH12 (memtype=DATA).

NOTE: Deleting WORK.HH13 (memtype=DATA).

NOTE: Deleting WORK.HH14 (memtype=DATA).

NOTE: Deleting WORK.HH15 (memtype=DATA).

NOTE: Deleting WORK.HH16 (memtype=DATA).

NOTE: Deleting WORK.HH17 (memtype=DATA).

NOTE: Deleting WORK.HH18 (memtype=DATA).

NOTE: Deleting WORK.HH19 (memtype=DATA).

NOTE: Deleting WORK.HH2 (memtype=DATA).

NOTE: Deleting WORK.HH20 (memtype=DATA).

NOTE: Deleting WORK.HH21 (memtype=DATA).

NOTE: Deleting WORK.HH3 (memtype=DATA).

NOTE: Deleting WORK.HH4 (memtype=DATA).

NOTE: Deleting WORK.HH5 (memtype=DATA).

NOTE: Deleting WORK.HH6 (memtype=DATA).

NOTE: Deleting WORK.HH7 (memtype=DATA).

NOTE: Deleting WORK.HH8 (memtype=DATA).

NOTE: Deleting WORK.HH9 (memtype=DATA).

NOTE: Deleting WORK.HIGHCOMM (memtype=DATA).

NOTE: Deleting WORK.HIGHCOMM1 (memtype=DATA).

NOTE: Deleting WORK.HIGHCOMM2 (memtype=DATA).

NOTE: Deleting WORK.HIGHCRUISE (memtype=DATA).

NOTE: Deleting WORK.HIGHCRUISE1 (memtype=DATA).

NOTE: Deleting WORK.HIGHCRUISE2 (memtype=DATA).

NOTE: Deleting WORK.HIGHFBARGE (memtype=DATA).

NOTE: Deleting WORK.HIGHFBARGE1 (memtype=DATA).

NOTE: Deleting WORK.HIGHFBARGE2 (memtype=DATA).

NOTE: Deleting WORK.HIGHFSHIPS (memtype=DATA).

NOTE: Deleting WORK.HIGHFSHIPS1 (memtype=DATA).

NOTE: Deleting WORK.HIGHFSHIPS2 (memtype=DATA).

NOTE: Deleting WORK.HIGHPASS (memtype=DATA).

NOTE: Deleting WORK.HIGHPASS1 (memtype=DATA).

NOTE: Deleting WORK.HIGHPASS2 (memtype=DATA).

NOTE: Deleting WORK.HIGHREC (memtype=DATA).

NOTE: Deleting WORK.HIGHREC1 (memtype=DATA).

NOTE: Deleting WORK.HIGHREC2 (memtype=DATA).

NOTE: Deleting WORK.HIGHTBARGE (memtype=DATA).

NOTE: Deleting WORK.HIGHTBARGE1 (memtype=DATA).

NOTE: Deleting WORK.HIGHTBARGE2 (memtype=DATA).

NOTE: Deleting WORK.HIGHTSHIPS (memtype=DATA).

NOTE: Deleting WORK.HIGHTSHIPS1 (memtype=DATA).

NOTE: Deleting WORK.HIGHTSHIPS2 (memtype=DATA).

NOTE: Deleting WORK.HIGHUTILITY (memtype=DATA).

NOTE: Deleting WORK.HIGHUTILITY1 (memtype=DATA).

NOTE: Deleting WORK.HIGHUTILITY2 (memtype=DATA).

NOTE: Deleting WORK.L1 (memtype=DATA).

NOTE: Deleting WORK.L10 (memtype=DATA).

NOTE: Deleting WORK.L11 (memtype=DATA).

NOTE: Deleting WORK.L12 (memtype=DATA).

256                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.L13 (memtype=DATA).

NOTE: Deleting WORK.L14 (memtype=DATA).

NOTE: Deleting WORK.L15 (memtype=DATA).

NOTE: Deleting WORK.L16 (memtype=DATA).

NOTE: Deleting WORK.L2 (memtype=DATA).

NOTE: Deleting WORK.L3 (memtype=DATA).

NOTE: Deleting WORK.L4 (memtype=DATA).

NOTE: Deleting WORK.L5 (memtype=DATA).

NOTE: Deleting WORK.L6 (memtype=DATA).

NOTE: Deleting WORK.L7 (memtype=DATA).

NOTE: Deleting WORK.L8 (memtype=DATA).

NOTE: Deleting WORK.L9 (memtype=DATA).

NOTE: Deleting WORK.LL1 (memtype=DATA).

NOTE: Deleting WORK.LL10 (memtype=DATA).

NOTE: Deleting WORK.LL11 (memtype=DATA).

NOTE: Deleting WORK.LL12 (memtype=DATA).

NOTE: Deleting WORK.LL13 (memtype=DATA).

NOTE: Deleting WORK.LL14 (memtype=DATA).

NOTE: Deleting WORK.LL15 (memtype=DATA).

NOTE: Deleting WORK.LL16 (memtype=DATA).

NOTE: Deleting WORK.LL2 (memtype=DATA).

NOTE: Deleting WORK.LL3 (memtype=DATA).

NOTE: Deleting WORK.LL4 (memtype=DATA).

NOTE: Deleting WORK.LL5 (memtype=DATA).

NOTE: Deleting WORK.LL6 (memtype=DATA).

NOTE: Deleting WORK.LL7 (memtype=DATA).

NOTE: Deleting WORK.LL8 (memtype=DATA).

NOTE: Deleting WORK.LL9 (memtype=DATA).

NOTE: Deleting WORK.LOWCOMM (memtype=DATA).

NOTE: Deleting WORK.LOWCOMM1 (memtype=DATA).

NOTE: Deleting WORK.LOWCOMM2 (memtype=DATA).

NOTE: Deleting WORK.LOWCRUISE (memtype=DATA).

NOTE: Deleting WORK.LOWCRUISE1 (memtype=DATA).

NOTE: Deleting WORK.LOWCRUISE2 (memtype=DATA).

NOTE: Deleting WORK.LOWFBARGE (memtype=DATA).

NOTE: Deleting WORK.LOWFBARGE1 (memtype=DATA).

NOTE: Deleting WORK.LOWFBARGE2 (memtype=DATA).

NOTE: Deleting WORK.LOWFSHIPS (memtype=DATA).

NOTE: Deleting WORK.LOWFSHIPS1 (memtype=DATA).

NOTE: Deleting WORK.LOWFSHIPS2 (memtype=DATA).

NOTE: Deleting WORK.LOWPASS (memtype=DATA).

NOTE: Deleting WORK.LOWPASS1 (memtype=DATA).

NOTE: Deleting WORK.LOWPASS2 (memtype=DATA).

NOTE: Deleting WORK.LOWREC (memtype=DATA).

NOTE: Deleting WORK.LOWREC1 (memtype=DATA).

NOTE: Deleting WORK.LOWREC2 (memtype=DATA).

NOTE: Deleting WORK.LOWTBARGE (memtype=DATA).

NOTE: Deleting WORK.LOWTBARGE1 (memtype=DATA).

NOTE: Deleting WORK.LOWTBARGE2 (memtype=DATA).

NOTE: Deleting WORK.LOWTSHIPS (memtype=DATA).

NOTE: Deleting WORK.LOWTSHIPS1 (memtype=DATA).

NOTE: Deleting WORK.LOWTSHIPS2 (memtype=DATA).

NOTE: Deleting WORK.LOWUTILITY (memtype=DATA).

NOTE: Deleting WORK.LOWUTILITY1 (memtype=DATA).

257                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.LOWUTILITY2 (memtype=DATA).

NOTE: Deleting WORK.N1 (memtype=DATA).

NOTE: Deleting WORK.N2 (memtype=DATA).

NOTE: Deleting WORK.N3 (memtype=DATA).

NOTE: Deleting WORK.NUM (memtype=DATA).

NOTE: Deleting WORK.TH1 (memtype=DATA).

NOTE: Deleting WORK.X1 (memtype=DATA).

NOTE: Deleting WORK.X2 (memtype=DATA).

NOTE: Deleting WORK.X_CF (memtype=DATA).

NOTE: Deleting WORK.X_CS (memtype=DATA).

NOTE: Deleting WORK.X_FB (memtype=DATA).

NOTE: Deleting WORK.X_FS (memtype=DATA).

NOTE: Deleting WORK.X_PV (memtype=DATA).

NOTE: Deleting WORK.X_RS (memtype=DATA).

NOTE: Deleting WORK.X_TB (memtype=DATA).

NOTE: Deleting WORK.X_TS (memtype=DATA).

NOTE: Deleting WORK.X_UT (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           1.43 seconds

      cpu time            0.10 seconds

      

NOTE: Copying TEMP3.HIGHCOMM3 to WORK.HIGHCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHCOMM3.

NOTE: The data set WORK.HIGHCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHCRUISE3 to WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHCRUISE3.

NOTE: The data set WORK.HIGHCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFBARGE3 to WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFBARGE3.

NOTE: The data set WORK.HIGHFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFSHIPS3 to WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFSHIPS3.

NOTE: The data set WORK.HIGHFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHPASS3 to WORK.HIGHPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHPASS3.

NOTE: The data set WORK.HIGHPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHREC3 to WORK.HIGHREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHREC3.

NOTE: The data set WORK.HIGHREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.HIGHTBARGE3 to WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTBARGE3.

NOTE: The data set WORK.HIGHTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHTSHIPS3 to WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTSHIPS3.

NOTE: The data set WORK.HIGHTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHUTILITY3 to WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHUTILITY3.

NOTE: The data set WORK.HIGHUTILITY3 has 11 observations and 1
variables.

NOTE: Copying TEMP3.LOWCOMM3 to WORK.LOWCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWCOMM3.

NOTE: The data set WORK.LOWCOMM3 has 11 observations and 1 variables.

258                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Copying TEMP3.LOWCRUISE3 to WORK.LOWCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWCRUISE3.

NOTE: The data set WORK.LOWCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFBARGE3 to WORK.LOWFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFBARGE3.

NOTE: The data set WORK.LOWFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFSHIPS3 to WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFSHIPS3.

NOTE: The data set WORK.LOWFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWPASS3 to WORK.LOWPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWPASS3.

NOTE: The data set WORK.LOWPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWREC3 to WORK.LOWREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWREC3.

NOTE: The data set WORK.LOWREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.LOWTBARGE3 to WORK.LOWTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTBARGE3.

NOTE: The data set WORK.LOWTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWTSHIPS3 to WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTSHIPS3.

NOTE: The data set WORK.LOWTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWUTILITY3 to WORK.LOWUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWUTILITY3.

NOTE: The data set WORK.LOWUTILITY3 has 11 observations and 1 variables.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.06 seconds

      cpu time            0.03 seconds

      

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.N (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: The file WORK.D1 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

259                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.A1 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D1.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 11 observations read from the data set WORK.A1.

NOTE: The data set WORK.D1 has 11 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A2 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A2.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 22 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

260                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A3 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A3.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 33 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A4 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

261                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A4 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A4.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 44 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A5 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A5.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 55 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

262                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A6 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A6.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 66 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A7 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A7.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 77 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

263                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A8 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A8.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 88 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

264                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A9 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A9.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 99 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A10 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A10.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 110 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

265                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A11 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A11.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 121 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D1A (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

266                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A1 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D1A.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 121 observations read from the data set WORK.A1.

NOTE: The data set WORK.D1A has 121 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A2 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A2 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A2.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 242 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

267                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A3 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A3.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 363 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A4 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

268                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A4.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 484 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A5 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A5.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 605 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

269                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A6 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A6 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A6.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 726 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A7 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D1A.

270                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 121 observations read from the data set WORK.A7.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 847 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A8 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A8.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 968 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

271                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A9 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A9.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 1089 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A10 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A10.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 1210 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

272                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A11 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A11.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 1331 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D2 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

273                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A1 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D2.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 1331 observations read from the data set WORK.A1.

NOTE: The data set WORK.D2 has 1331 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A2 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

274                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A2 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A2.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 2662 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A3 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A3.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 3993 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

275                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A4 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A4.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 5324 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A5 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A5.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 6655 observations and 4 variables.

276                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A6 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A6 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A6.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 7986 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

277                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A7 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A7.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 9317 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A8 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A8.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 10648 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

278                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A9 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A9.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 11979 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A10 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

279                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A10 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A10.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 13310 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A11 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A11.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 14641 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

280                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.D1A (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D1B (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D7 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D3 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A1 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A1 to WORK.D3.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 14641 observations read from the data set WORK.A1.

NOTE: The data set WORK.D3 has 14641 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

281                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A2 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A2 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A2.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 29282 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A3 has 14641 observations and 5 variables.

282                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A3 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A3.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 43923 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A4 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A4.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 58564 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

283                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A5 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A5.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 73205 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A6 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

284                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A6 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A6.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 87846 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A7 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A7.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 102487 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

285                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A8 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A8 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A8.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 117128 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A9 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A9 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A9.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 131769 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

286                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A10 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A10.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 146410 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

287                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A11 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A11.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 161051 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.86 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D6 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D8 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

288                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A1 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A1 to WORK.D8.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 161051 observations read from the data set WORK.A1.

NOTE: The data set WORK.D8 has 161051 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A2 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A2 to WORK.D8.

NOTE: There were 161051 observations read from the data set WORK.A2.

NOTE: 161051 observations added.

NOTE: The data set WORK.D8 has 322102 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

289                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A3 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.03 seconds

      

NOTE: Appending WORK.A3 to WORK.D8.

NOTE: There were 161051 observations read from the data set WORK.A3.

NOTE: 161051 observations added.

NOTE: The data set WORK.D8 has 483153 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A4 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.04 seconds

      

290                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A4 to WORK.D8.

NOTE: There were 161051 observations read from the data set WORK.A4.

NOTE: 161051 observations added.

NOTE: The data set WORK.D8 has 644204 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           1.51 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A5 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: Appending WORK.A5 to WORK.D8.

NOTE: There were 161051 observations read from the data set WORK.A5.

NOTE: 161051 observations added.

NOTE: The data set WORK.D8 has 805255 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTSHIPS3.

291                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A6 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: Appending WORK.A6 to WORK.D8.

NOTE: There were 161051 observations read from the data set WORK.A6.

NOTE: 161051 observations added.

NOTE: The data set WORK.D8 has 966306 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A7 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A7 to WORK.D8.

NOTE: There were 161051 observations read from the data set WORK.A7.

NOTE: 161051 observations added.

NOTE: The data set WORK.D8 has 1127357 observations and 6 variables.

292                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A8 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A8 to WORK.D8.

NOTE: There were 161051 observations read from the data set WORK.A8.

NOTE: 161051 observations added.

NOTE: The data set WORK.D8 has 1288408 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

293                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A9 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.15 seconds

      cpu time            0.03 seconds

      

NOTE: Appending WORK.A9 to WORK.D8.

NOTE: There were 161051 observations read from the data set WORK.A9.

NOTE: 161051 observations added.

NOTE: The data set WORK.D8 has 1449459 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           1.40 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A10 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A10 to WORK.D8.

NOTE: There were 161051 observations read from the data set WORK.A10.

NOTE: 161051 observations added.

NOTE: The data set WORK.D8 has 1610510 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

294                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A11 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: Appending WORK.A11 to WORK.D8.

NOTE: There were 161051 observations read from the data set WORK.A11.

NOTE: 161051 observations added.

NOTE: The data set WORK.D8 has 1771561 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D9 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

295                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The file WORK.D10 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D4 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1771561 observations read from the data set WORK.D8.

NOTE: The data set TEMP.LOW_DF has 1771561 observations and 7 variables.

NOTE: DATA statement used (Total process time):

      real time           1.20 seconds

      cpu time            0.76 seconds

      

NOTE: Deleting WORK.D8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.14 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D5 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.HIGHCOMM3 (memtype=DATA).

NOTE: Deleting WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHPASS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHREC3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.LOWCOMM3 (memtype=DATA).

NOTE: Deleting WORK.LOWCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWPASS3 (memtype=DATA).

NOTE: Deleting WORK.LOWREC3 (memtype=DATA).

NOTE: Deleting WORK.LOWTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.N (memtype=DATA).

296                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.LARGE2 created, with 1771561 rows and 16 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           5.06 seconds

      cpu time            3.51 seconds

      

NOTE: Variable cs_cost is uninitialized.

NOTE: Variable cf_cost is uninitialized.

NOTE: Variable rs_cost is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1771561 at 1083:140   1771561 at 1083:164   1771561 at 1083:16    

NOTE: There were 1771561 observations read from the data set
WORK.LARGE2.

NOTE: The data set WORK.LARGE3 has 1771561 observations and 20
variables.

NOTE: DATA statement used (Total process time):

      real time           2.81 seconds

      cpu time            1.65 seconds

      

NOTE: Deleting WORK.LARGE2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           3.26 seconds

      cpu time            0.03 seconds

      

NOTE: Table WORK.LARGE3A created, with 1771561 rows and 31 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           11.76 seconds

      cpu time            5.90 seconds

      

NOTE: Deleting WORK.LARGE3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           3.09 seconds

      cpu time            0.03 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE3A.

NOTE: The data set WORK.LARGE3B has 1771561 observations and 43
variables.

NOTE: DATA statement used (Total process time):

      real time           6.18 seconds

      cpu time            2.31 seconds

      

297                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.LARGE3A (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           3.45 seconds

      cpu time            0.06 seconds

      

NOTE: Table WORK.LARGE4 created, with 1771561 rows and 34 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           6.64 seconds

      cpu time            4.70 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set TEMP4.LARGE4 has 1771561 observations and 34
variables.

NOTE: DATA statement used (Total process time):

      real time           3.92 seconds

      cpu time            1.42 seconds

      

NOTE: Deleting WORK.LARGE3B (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           3.42 seconds

      cpu time            0.09 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L1 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           2.50 seconds

      cpu time            0.71 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L2 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           3.12 seconds

      cpu time            0.59 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L3 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           1.92 seconds

      cpu time            0.70 seconds

      

298                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L4 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           2.03 seconds

      cpu time            0.70 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L5 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.71 seconds

      cpu time            0.65 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L6 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           1.40 seconds

      cpu time            0.65 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L7 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.84 seconds

      cpu time            0.59 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L8 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           1.71 seconds

      cpu time            0.64 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L9 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.71 seconds

      cpu time            0.68 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L10 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           1.92 seconds

      cpu time            0.64 seconds

299                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L11 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           1.04 seconds

      cpu time            0.64 seconds

      

NOTE: There were 1771561 observations read from the data set WORK.L1.

NOTE: There were 1771561 observations read from the data set WORK.L2.

NOTE: There were 1771561 observations read from the data set WORK.L3.

NOTE: There were 1771561 observations read from the data set WORK.L4.

NOTE: There were 1771561 observations read from the data set WORK.L5.

NOTE: There were 1771561 observations read from the data set WORK.L6.

NOTE: There were 1771561 observations read from the data set WORK.L7.

NOTE: There were 1771561 observations read from the data set WORK.L8.

NOTE: There were 1771561 observations read from the data set WORK.L9.

NOTE: There were 1771561 observations read from the data set WORK.L10.

NOTE: There were 1771561 observations read from the data set WORK.L11.

NOTE: The data set WORK.L has 19487171 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           7.65 seconds

      cpu time            3.84 seconds

      

NOTE: Deleting WORK.L1 (memtype=DATA).

NOTE: Deleting WORK.L2 (memtype=DATA).

NOTE: Deleting WORK.L3 (memtype=DATA).

NOTE: Deleting WORK.L4 (memtype=DATA).

NOTE: Deleting WORK.L5 (memtype=DATA).

NOTE: Deleting WORK.L6 (memtype=DATA).

NOTE: Deleting WORK.L7 (memtype=DATA).

NOTE: Deleting WORK.L8 (memtype=DATA).

NOTE: Deleting WORK.L9 (memtype=DATA).

NOTE: Deleting WORK.L10 (memtype=DATA).

NOTE: Deleting WORK.L11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: There were 19487171 observations read from the data set WORK.L.

NOTE: The data set WORK.L has 19487171 observations and 2 variables.

NOTE: PROCEDURE SORT used (Total process time):

      real time           14.57 seconds

      cpu time            17.46 seconds

      

NOTE: The data set TEMP4.LOW_DF has 1 observations and 102 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

300                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           8.15 seconds

      cpu time            7.09 seconds

      

NOTE: Deleting WORK.L (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           4.10 seconds

      cpu time            0.04 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.LARGE5 has 1771561 observations and 46
variables.

NOTE: DATA statement used (Total process time):

      real time           6.78 seconds

      cpu time            3.53 seconds

      

NOTE: Deleting WORK.LARGE4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Table WORK.X created, with 3 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D1 created, with 3 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           3.81 seconds

      cpu time            2.10 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D2 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           4.17 seconds

      cpu time            1.86 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D3 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           2.87 seconds

      cpu time            1.96 seconds

301                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D4 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           5.07 seconds

      cpu time            1.93 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D5 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           5.03 seconds

      cpu time            1.87 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D6 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           2.87 seconds

      cpu time            1.87 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D7 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           5.13 seconds

      cpu time            1.76 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D8 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           2.82 seconds

      cpu time            1.90 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

302                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D9 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           5.21 seconds

      cpu time            1.78 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D10 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           3.85 seconds

      cpu time            1.82 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D11 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           2.96 seconds

      cpu time            1.79 seconds

      

NOTE: Deleting WORK.LARGE5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           3.50 seconds

      cpu time            0.12 seconds

      

NOTE: There were 3 observations read from the data set WORK.D1.

NOTE: There were 2 observations read from the data set WORK.D2.

NOTE: There were 1 observations read from the data set WORK.D3.

NOTE: There were 1 observations read from the data set WORK.D4.

NOTE: There were 1 observations read from the data set WORK.D5.

NOTE: There were 1 observations read from the data set WORK.D6.

NOTE: There were 1 observations read from the data set WORK.D7.

NOTE: There were 1 observations read from the data set WORK.D8.

NOTE: There were 1 observations read from the data set WORK.D9.

NOTE: There were 1 observations read from the data set WORK.D10.

NOTE: There were 1 observations read from the data set WORK.D11.

NOTE: The data set TEMP.LOWOUTDATA_DF has 3 observations and 13
variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

303                                                        The SAS
System                            15:50 Friday, November 21, 2008

1084       
/**********************************************************************

1085        *   PRODUCT:   SAS

1086        *   VERSION:   9.2

1087        *   CREATOR:   External File Interface

1088        *   DATE:      21NOV08

1089        *   DESC:      Generated SAS Datastep Code

1090        *   TEMPLATE SOURCE:  (None Specified.)

1091       
***********************************************************************/

1092           data _null_;

1093           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

1094           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

1095           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_DF.csv' delimiter=',' DSD

1095     ! DROPOVER lrecl=32767;

1096           if _n_ = 1 then        /* write column names or labels */

1097            do;

1098              put

1099                 "NAICS"

1100              ','

1101                 "D"

1102              ','

1103                 "percent1"

1104              ','

1105                 "percent2"

1106              ','

1107                 "percent3"

1108              ','

1109                 "percent4"

1110              ','

1111                 "percent5"

1112              ','

1113                 "percent6"

1114              ','

1115                 "percent7"

1116              ','

1117                 "percent8"

1118              ','

1119                 "percent9"

1120              ','

1121                 "percent10"

1122              ','

1123                 "percent11"

1124              ;

1125            end;

1126          set  TEMP.LOWOUTDATA_DF   end=EFIEOD;

1127              format NAICS $16. ;

1128              format D best12. ;

1129              format percent1 percent8.2 ;

1130              format percent2 percent8.2 ;

1131              format percent3 percent8.2 ;

1132              format percent4 percent8.2 ;

1133              format percent5 percent8.2 ;

1134              format percent6 percent8.2 ;

1135              format percent7 percent8.2 ;

1136              format percent8 percent8.2 ;

304                                                        The SAS
System                            15:50 Friday, November 21, 2008

1137              format percent9 percent8.2 ;

1138              format percent10 percent8.2 ;

1139              format percent11 percent8.2 ;

1140            do;

1141              EFIOUT + 1;

1142              put NAICS $ @;

1143              put D @;

1144              put percent1 @;

1145              put percent2 @;

1146              put percent3 @;

1147              put percent4 @;

1148              put percent5 @;

1149              put percent6 @;

1150              put percent7 @;

1151              put percent8 @;

1152              put percent9 @;

1153              put percent10 @;

1154              put percent11 ;

1155              ;

1156            end;

1157           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

1158           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

1159           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_DF.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_DF.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:15:53:55,

      Create Time=21Nov2008:15:53:55

NOTE: 4 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_DF.csv'.

      The minimum record length was 31.

      The maximum record length was 108.

NOTE: There were 3 observations read from the data set
TEMP.LOWOUTDATA_DF.

NOTE: At least one W.D format was too small for the number to be
printed. The decimal may be shifted by the "BEST" format.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

3 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_DF.csv from TEMP.LOWOUTDATA_DF.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_DF.csv" file was successfully
created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

1160       
/**********************************************************************

1161        *   PRODUCT:   SAS

1162        *   VERSION:   9.2

1163        *   CREATOR:   External File Interface

305                                                        The SAS
System                            15:50 Friday, November 21, 2008

1164        *   DATE:      21NOV08

1165        *   DESC:      Generated SAS Datastep Code

1166        *   TEMPLATE SOURCE:  (None Specified.)

1167       
***********************************************************************/

1168           data _null_;

1169           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

1170           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

1171           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_DF.csv' delimiter=',' DSD DROPOVER

1171     ! lrecl=32767;

1172           if _n_ = 1 then        /* write column names or labels */

1173            do;

1174              put

1175                 "P_A"

1176              ','

1177                 "P_100"

1178              ','

1179                 "P_0"

1180              ','

1181                 "P_1"

1182              ','

1183                 "P_2"

1184              ','

1185                 "P_3"

1186              ','

1187                 "P_4"

1188              ','

1189                 "P_5"

1190              ','

1191                 "P_6"

1192              ','

1193                 "P_7"

1194              ','

1195                 "P_8"

1196              ','

1197                 "P_9"

1198              ','

1199                 "P_10"

1200              ','

1201                 "P_11"

1202              ','

1203                 "P_12"

1204              ','

1205                 "P_13"

1206              ','

1207                 "P_14"

1208              ','

1209                 "P_15"

1210              ','

1211                 "P_16"

1212              ','

1213                 "P_17"

1214              ','

1215                 "P_18"

1216              ','

306                                                        The SAS
System                            15:50 Friday, November 21, 2008

1217                 "P_19"

1218              ','

1219                 "P_20"

1220              ','

1221                 "P_21"

1222              ','

1223                 "P_22"

1224              ','

1225                 "P_23"

1226              ','

1227                 "P_24"

1228              ','

1229                 "P_25"

1230              ','

1231                 "P_26"

1232              ','

1233                 "P_27"

1234              ','

1235                 "P_28"

1236              ','

1237                 "P_29"

1238              ','

1239                 "P_30"

1240              ','

1241                 "P_31"

1242              ','

1243                 "P_32"

1244              ','

1245                 "P_33"

1246              ','

1247                 "P_34"

1248              ','

1249                 "P_35"

1250              ','

1251                 "P_36"

1252              ','

1253                 "P_37"

1254              ','

1255                 "P_38"

1256              ','

1257                 "P_39"

1258              ','

1259                 "P_40"

1260              ','

1261                 "P_41"

1262              ','

1263                 "P_42"

1264              ','

1265                 "P_43"

1266              ','

1267                 "P_44"

1268              ','

1269                 "P_45"

1270              ','

307                                                        The SAS
System                            15:50 Friday, November 21, 2008

1271                 "P_46"

1272              ','

1273                 "P_47"

1274              ','

1275                 "P_48"

1276              ','

1277                 "P_49"

1278              ','

1279                 "P_50"

1280              ','

1281                 "P_51"

1282              ','

1283                 "P_52"

1284              ','

1285                 "P_53"

1286              ','

1287                 "P_54"

1288              ','

1289                 "P_55"

1290              ','

1291                 "P_56"

1292              ','

1293                 "P_57"

1294              ','

1295                 "P_58"

1296              ','

1297                 "P_59"

1298              ','

1299                 "P_60"

1300              ','

1301                 "P_61"

1302              ','

1303                 "P_62"

1304              ','

1305                 "P_63"

1306              ','

1307                 "P_64"

1308              ','

1309                 "P_65"

1310              ','

1311                 "P_66"

1312              ','

1313                 "P_67"

1314              ','

1315                 "P_68"

1316              ','

1317                 "P_69"

1318              ','

1319                 "P_70"

1320              ','

1321                 "P_71"

1322              ','

1323                 "P_72"

1324              ','

308                                                        The SAS
System                            15:50 Friday, November 21, 2008

1325                 "P_73"

1326              ','

1327                 "P_74"

1328              ','

1329                 "P_75"

1330              ','

1331                 "P_76"

1332              ','

1333                 "P_77"

1334              ','

1335                 "P_78"

1336              ','

1337                 "P_79"

1338              ','

1339                 "P_80"

1340              ','

1341                 "P_81"

1342              ','

1343                 "P_82"

1344              ','

1345                 "P_83"

1346              ','

1347                 "P_84"

1348              ','

1349                 "P_85"

1350              ','

1351                 "P_86"

1352              ','

1353                 "P_87"

1354              ','

1355                 "P_88"

1356              ','

1357                 "P_89"

1358              ','

1359                 "P_90"

1360              ','

1361                 "P_91"

1362              ','

1363                 "P_92"

1364              ','

1365                 "P_93"

1366              ','

1367                 "P_94"

1368              ','

1369                 "P_95"

1370              ','

1371                 "P_96"

1372              ','

1373                 "P_97"

1374              ','

1375                 "P_98"

1376              ','

1377                 "P_99"

1378              ;

309                                                        The SAS
System                            15:50 Friday, November 21, 2008

1379            end;

1380          set  TEMP4.LOW_DF   end=EFIEOD;

1381              format P_A best12. ;

1382              format P_100 best12. ;

1383              format P_0 best12. ;

1384              format P_1 best12. ;

1385              format P_2 best12. ;

1386              format P_3 best12. ;

1387              format P_4 best12. ;

1388              format P_5 best12. ;

1389              format P_6 best12. ;

1390              format P_7 best12. ;

1391              format P_8 best12. ;

1392              format P_9 best12. ;

1393              format P_10 best12. ;

1394              format P_11 best12. ;

1395              format P_12 best12. ;

1396              format P_13 best12. ;

1397              format P_14 best12. ;

1398              format P_15 best12. ;

1399              format P_16 best12. ;

1400              format P_17 best12. ;

1401              format P_18 best12. ;

1402              format P_19 best12. ;

1403              format P_20 best12. ;

1404              format P_21 best12. ;

1405              format P_22 best12. ;

1406              format P_23 best12. ;

1407              format P_24 best12. ;

1408              format P_25 best12. ;

1409              format P_26 best12. ;

1410              format P_27 best12. ;

1411              format P_28 best12. ;

1412              format P_29 best12. ;

1413              format P_30 best12. ;

1414              format P_31 best12. ;

1415              format P_32 best12. ;

1416              format P_33 best12. ;

1417              format P_34 best12. ;

1418              format P_35 best12. ;

1419              format P_36 best12. ;

1420              format P_37 best12. ;

1421              format P_38 best12. ;

1422              format P_39 best12. ;

1423              format P_40 best12. ;

1424              format P_41 best12. ;

1425              format P_42 best12. ;

1426              format P_43 best12. ;

1427              format P_44 best12. ;

1428              format P_45 best12. ;

1429              format P_46 best12. ;

1430              format P_47 best12. ;

1431              format P_48 best12. ;

1432              format P_49 best12. ;

310                                                        The SAS
System                            15:50 Friday, November 21, 2008

1433              format P_50 best12. ;

1434              format P_51 best12. ;

1435              format P_52 best12. ;

1436              format P_53 best12. ;

1437              format P_54 best12. ;

1438              format P_55 best12. ;

1439              format P_56 best12. ;

1440              format P_57 best12. ;

1441              format P_58 best12. ;

1442              format P_59 best12. ;

1443              format P_60 best12. ;

1444              format P_61 best12. ;

1445              format P_62 best12. ;

1446              format P_63 best12. ;

1447              format P_64 best12. ;

1448              format P_65 best12. ;

1449              format P_66 best12. ;

1450              format P_67 best12. ;

1451              format P_68 best12. ;

1452              format P_69 best12. ;

1453              format P_70 best12. ;

1454              format P_71 best12. ;

1455              format P_72 best12. ;

1456              format P_73 best12. ;

1457              format P_74 best12. ;

1458              format P_75 best12. ;

1459              format P_76 best12. ;

1460              format P_77 best12. ;

1461              format P_78 best12. ;

1462              format P_79 best12. ;

1463              format P_80 best12. ;

1464              format P_81 best12. ;

1465              format P_82 best12. ;

1466              format P_83 best12. ;

1467              format P_84 best12. ;

1468              format P_85 best12. ;

1469              format P_86 best12. ;

1470              format P_87 best12. ;

1471              format P_88 best12. ;

1472              format P_89 best12. ;

1473              format P_90 best12. ;

1474              format P_91 best12. ;

1475              format P_92 best12. ;

1476              format P_93 best12. ;

1477              format P_94 best12. ;

1478              format P_95 best12. ;

1479              format P_96 best12. ;

1480              format P_97 best12. ;

1481              format P_98 best12. ;

1482              format P_99 best12. ;

1483            do;

1484              EFIOUT + 1;

1485              put P_A @;

1486              put P_100 @;

311                                                        The SAS
System                            15:50 Friday, November 21, 2008

1487              put P_0 @;

1488              put P_1 @;

1489              put P_2 @;

1490              put P_3 @;

1491              put P_4 @;

1492              put P_5 @;

1493              put P_6 @;

1494              put P_7 @;

1495              put P_8 @;

1496              put P_9 @;

1497              put P_10 @;

1498              put P_11 @;

1499              put P_12 @;

1500              put P_13 @;

1501              put P_14 @;

1502              put P_15 @;

1503              put P_16 @;

1504              put P_17 @;

1505              put P_18 @;

1506              put P_19 @;

1507              put P_20 @;

1508              put P_21 @;

1509              put P_22 @;

1510              put P_23 @;

1511              put P_24 @;

1512              put P_25 @;

1513              put P_26 @;

1514              put P_27 @;

1515              put P_28 @;

1516              put P_29 @;

1517              put P_30 @;

1518              put P_31 @;

1519              put P_32 @;

1520              put P_33 @;

1521              put P_34 @;

1522              put P_35 @;

1523              put P_36 @;

1524              put P_37 @;

1525              put P_38 @;

1526              put P_39 @;

1527              put P_40 @;

1528              put P_41 @;

1529              put P_42 @;

1530              put P_43 @;

1531              put P_44 @;

1532              put P_45 @;

1533              put P_46 @;

1534              put P_47 @;

1535              put P_48 @;

1536              put P_49 @;

1537              put P_50 @;

1538              put P_51 @;

1539              put P_52 @;

1540              put P_53 @;

312                                                        The SAS
System                            15:50 Friday, November 21, 2008

1541              put P_54 @;

1542              put P_55 @;

1543              put P_56 @;

1544              put P_57 @;

1545              put P_58 @;

1546              put P_59 @;

1547              put P_60 @;

1548              put P_61 @;

1549              put P_62 @;

1550              put P_63 @;

1551              put P_64 @;

1552              put P_65 @;

1553              put P_66 @;

1554              put P_67 @;

1555              put P_68 @;

1556              put P_69 @;

1557              put P_70 @;

1558              put P_71 @;

1559              put P_72 @;

1560              put P_73 @;

1561              put P_74 @;

1562              put P_75 @;

1563              put P_76 @;

1564              put P_77 @;

1565              put P_78 @;

1566              put P_79 @;

1567              put P_80 @;

1568              put P_81 @;

1569              put P_82 @;

1570              put P_83 @;

1571              put P_84 @;

1572              put P_85 @;

1573              put P_86 @;

1574              put P_87 @;

1575              put P_88 @;

1576              put P_89 @;

1577              put P_90 @;

1578              put P_91 @;

1579              put P_92 @;

1580              put P_93 @;

1581              put P_94 @;

1582              put P_95 @;

1583              put P_96 @;

1584              put P_97 @;

1585              put P_98 @;

1586              put P_99 ;

1587              ;

1588            end;

1589           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

1590           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

1591           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_DF.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_DF.csv,

313                                                        The SAS
System                            15:50 Friday, November 21, 2008

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:15:53:55,

      Create Time=21Nov2008:15:53:55

NOTE: 2 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_DF.csv'.

      The minimum record length was 499.

      The maximum record length was 1308.

NOTE: There were 1 observations read from the data set TEMP4.LOW_DF.

NOTE: DATA statement used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

1 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_DF.csv from TEMP4.LOW_DF.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_DF.csv" file was successfully created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.09 seconds

      cpu time            0.09 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: Deleting WORK.D10 (memtype=DATA).

NOTE: Deleting WORK.D11 (memtype=DATA).

NOTE: Deleting WORK.D2 (memtype=DATA).

NOTE: Deleting WORK.D3 (memtype=DATA).

NOTE: Deleting WORK.D4 (memtype=DATA).

NOTE: Deleting WORK.D5 (memtype=DATA).

NOTE: Deleting WORK.D6 (memtype=DATA).

NOTE: Deleting WORK.D7 (memtype=DATA).

NOTE: Deleting WORK.D8 (memtype=DATA).

NOTE: Deleting WORK.D9 (memtype=DATA).

NOTE: Deleting WORK.X (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Copying TEMP3.HIGHCOMM3 to WORK.HIGHCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHCOMM3.

NOTE: The data set WORK.HIGHCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHCRUISE3 to WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHCRUISE3.

NOTE: The data set WORK.HIGHCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFBARGE3 to WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFBARGE3.

NOTE: The data set WORK.HIGHFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFSHIPS3 to WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFSHIPS3.

NOTE: The data set WORK.HIGHFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHPASS3 to WORK.HIGHPASS3 (memtype=DATA).

314                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set TEMP3.HIGHPASS3.

NOTE: The data set WORK.HIGHPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHREC3 to WORK.HIGHREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHREC3.

NOTE: The data set WORK.HIGHREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.HIGHTBARGE3 to WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTBARGE3.

NOTE: The data set WORK.HIGHTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHTSHIPS3 to WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTSHIPS3.

NOTE: The data set WORK.HIGHTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHUTILITY3 to WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHUTILITY3.

NOTE: The data set WORK.HIGHUTILITY3 has 11 observations and 1
variables.

NOTE: Copying TEMP3.LOWCOMM3 to WORK.LOWCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWCOMM3.

NOTE: The data set WORK.LOWCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWCRUISE3 to WORK.LOWCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWCRUISE3.

NOTE: The data set WORK.LOWCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFBARGE3 to WORK.LOWFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFBARGE3.

NOTE: The data set WORK.LOWFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFSHIPS3 to WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFSHIPS3.

NOTE: The data set WORK.LOWFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWPASS3 to WORK.LOWPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWPASS3.

NOTE: The data set WORK.LOWPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWREC3 to WORK.LOWREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWREC3.

NOTE: The data set WORK.LOWREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.LOWTBARGE3 to WORK.LOWTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTBARGE3.

NOTE: The data set WORK.LOWTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWTSHIPS3 to WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTSHIPS3.

NOTE: The data set WORK.LOWTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWUTILITY3 to WORK.LOWUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWUTILITY3.

NOTE: The data set WORK.LOWUTILITY3 has 11 observations and 1 variables.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting TEMP.LOWOUTDATA_DF (memtype=DATA).

NOTE: Deleting TEMP.LOW_DF (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

315                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Table TEMP.LOW_FF created, with 11 rows and 2 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D1 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D1A (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D1B (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D7 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D2 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D6 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D3 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

316                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The file WORK.D9 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D10 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D4 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D8 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D5 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.HIGHCOMM3 (memtype=DATA).

NOTE: Deleting WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHPASS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHREC3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.LOWCOMM3 (memtype=DATA).

NOTE: Deleting WORK.LOWCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWPASS3 (memtype=DATA).

NOTE: Deleting WORK.LOWREC3 (memtype=DATA).

NOTE: Deleting WORK.LOWTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWUTILITY3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

317                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.LARGE2 created, with 11 rows and 11 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Variable cs_cost is uninitialized.

NOTE: Variable fb_cost is uninitialized.

NOTE: Variable fs_cost is uninitialized.

NOTE: Variable pv_cost is uninitialized.

NOTE: Variable rs_cost is uninitialized.

NOTE: Variable tb_cost is uninitialized.

NOTE: Variable ts_cost is uninitialized.

NOTE: Variable ut_cost is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      11 at 1591:140   11 at 1591:188   11 at 1591:212   11 at 1591:236 
 11 at 1591:16    11 at 1591:40    11 at 1591:64

      11 at 1591:88    

NOTE: There were 11 observations read from the data set WORK.LARGE2.

NOTE: The data set WORK.LARGE3 has 11 observations and 20 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.LARGE3A created, with 11 rows and 31 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE3A.

318                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.LARGE3B has 11 observations and 43 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.LARGE3A (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.LARGE4 created, with 11 rows and 34 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set TEMP4.LARGE4 has 11 observations and 34 variables.

NOTE: DATA statement used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.LARGE3B (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L1 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L2 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L3 has 11 observations and 2 variables.

319                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L4 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L5 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L6 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L7 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L8 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L9 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

320                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L10 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L11 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.L1.

NOTE: There were 11 observations read from the data set WORK.L2.

NOTE: There were 11 observations read from the data set WORK.L3.

NOTE: There were 11 observations read from the data set WORK.L4.

NOTE: There were 11 observations read from the data set WORK.L5.

NOTE: There were 11 observations read from the data set WORK.L6.

NOTE: There were 11 observations read from the data set WORK.L7.

NOTE: There were 11 observations read from the data set WORK.L8.

NOTE: There were 11 observations read from the data set WORK.L9.

NOTE: There were 11 observations read from the data set WORK.L10.

NOTE: There were 11 observations read from the data set WORK.L11.

NOTE: The data set WORK.L has 121 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.L1 (memtype=DATA).

NOTE: Deleting WORK.L2 (memtype=DATA).

NOTE: Deleting WORK.L3 (memtype=DATA).

NOTE: Deleting WORK.L4 (memtype=DATA).

NOTE: Deleting WORK.L5 (memtype=DATA).

NOTE: Deleting WORK.L6 (memtype=DATA).

NOTE: Deleting WORK.L7 (memtype=DATA).

NOTE: Deleting WORK.L8 (memtype=DATA).

NOTE: Deleting WORK.L9 (memtype=DATA).

NOTE: Deleting WORK.L10 (memtype=DATA).

NOTE: Deleting WORK.L11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.L.

NOTE: The data set WORK.L has 121 observations and 2 variables.

NOTE: PROCEDURE SORT used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

321                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: The data set TEMP4.LOW_FF has 1 observations and 102 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.L (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.LARGE5 has 11 observations and 46 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D1 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D2 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

322                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Table WORK.D3 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D4 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D5 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D6 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D7 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.03 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D8 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

323                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D9 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D10 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D11 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.LARGE5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 2 observations read from the data set WORK.D1.

NOTE: There were 1 observations read from the data set WORK.D2.

NOTE: There were 1 observations read from the data set WORK.D3.

NOTE: There were 1 observations read from the data set WORK.D4.

NOTE: There were 1 observations read from the data set WORK.D5.

NOTE: There were 1 observations read from the data set WORK.D6.

NOTE: There were 1 observations read from the data set WORK.D7.

NOTE: There were 1 observations read from the data set WORK.D8.

NOTE: There were 1 observations read from the data set WORK.D9.

NOTE: There were 1 observations read from the data set WORK.D10.

NOTE: There were 1 observations read from the data set WORK.D11.

NOTE: The data set TEMP.LOWOUTDATA_FF has 2 observations and 13
variables.

NOTE: DATA statement used (Total process time):

324                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.01 seconds

      cpu time            0.01 seconds

      

1592       
/**********************************************************************

1593        *   PRODUCT:   SAS

1594        *   VERSION:   9.2

1595        *   CREATOR:   External File Interface

1596        *   DATE:      21NOV08

1597        *   DESC:      Generated SAS Datastep Code

1598        *   TEMPLATE SOURCE:  (None Specified.)

1599       
***********************************************************************/

1600           data _null_;

1601           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

1602           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

1603           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_FF.csv' delimiter=',' DSD

1603     ! DROPOVER lrecl=32767;

1604           if _n_ = 1 then        /* write column names or labels */

1605            do;

1606              put

1607                 "NAICS"

1608              ','

1609                 "D"

1610              ','

1611                 "percent1"

1612              ','

1613                 "percent2"

1614              ','

1615                 "percent3"

1616              ','

1617                 "percent4"

1618              ','

1619                 "percent5"

1620              ','

1621                 "percent6"

1622              ','

1623                 "percent7"

1624              ','

1625                 "percent8"

1626              ','

1627                 "percent9"

1628              ','

1629                 "percent10"

1630              ','

1631                 "percent11"

1632              ;

1633            end;

1634          set  TEMP.LOWOUTDATA_FF   end=EFIEOD;

1635              format NAICS $16. ;

1636              format D best12. ;

1637              format percent1 percent8.2 ;

1638              format percent2 percent8.2 ;

1639              format percent3 percent8.2 ;

325                                                        The SAS
System                            15:50 Friday, November 21, 2008

1640              format percent4 percent8.2 ;

1641              format percent5 percent8.2 ;

1642              format percent6 percent8.2 ;

1643              format percent7 percent8.2 ;

1644              format percent8 percent8.2 ;

1645              format percent9 percent8.2 ;

1646              format percent10 percent8.2 ;

1647              format percent11 percent8.2 ;

1648            do;

1649              EFIOUT + 1;

1650              put NAICS $ @;

1651              put D @;

1652              put percent1 @;

1653              put percent2 @;

1654              put percent3 @;

1655              put percent4 @;

1656              put percent5 @;

1657              put percent6 @;

1658              put percent7 @;

1659              put percent8 @;

1660              put percent9 @;

1661              put percent10 @;

1662              put percent11 ;

1663              ;

1664            end;

1665           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

1666           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

1667           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_FF.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_FF.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:15:53:55,

      Create Time=21Nov2008:15:53:55

NOTE: 3 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_FF.csv'.

      The minimum record length was 23.

      The maximum record length was 108.

NOTE: There were 2 observations read from the data set
TEMP.LOWOUTDATA_FF.

NOTE: At least one W.D format was too small for the number to be
printed. The decimal may be shifted by the "BEST" format.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.00 seconds

      

2 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_FF.csv from TEMP.LOWOUTDATA_FF.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_FF.csv" file was successfully
created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.09 seconds

      cpu time            0.03 seconds

      

326                                                        The SAS
System                            15:50 Friday, November 21, 2008

1668       
/**********************************************************************

1669        *   PRODUCT:   SAS

1670        *   VERSION:   9.2

1671        *   CREATOR:   External File Interface

1672        *   DATE:      21NOV08

1673        *   DESC:      Generated SAS Datastep Code

1674        *   TEMPLATE SOURCE:  (None Specified.)

1675       
***********************************************************************/

1676           data _null_;

1677           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

1678           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

1679           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_FF.csv' delimiter=',' DSD DROPOVER

1679     ! lrecl=32767;

1680           if _n_ = 1 then        /* write column names or labels */

1681            do;

1682              put

1683                 "P_A"

1684              ','

1685                 "P_100"

1686              ','

1687                 "P_0"

1688              ','

1689                 "P_1"

1690              ','

1691                 "P_2"

1692              ','

1693                 "P_3"

1694              ','

1695                 "P_4"

1696              ','

1697                 "P_5"

1698              ','

1699                 "P_6"

1700              ','

1701                 "P_7"

1702              ','

1703                 "P_8"

1704              ','

1705                 "P_9"

1706              ','

1707                 "P_10"

1708              ','

1709                 "P_11"

1710              ','

1711                 "P_12"

1712              ','

1713                 "P_13"

1714              ','

1715                 "P_14"

1716              ','

1717                 "P_15"

1718              ','

1719                 "P_16"

327                                                        The SAS
System                            15:50 Friday, November 21, 2008

1720              ','

1721                 "P_17"

1722              ','

1723                 "P_18"

1724              ','

1725                 "P_19"

1726              ','

1727                 "P_20"

1728              ','

1729                 "P_21"

1730              ','

1731                 "P_22"

1732              ','

1733                 "P_23"

1734              ','

1735                 "P_24"

1736              ','

1737                 "P_25"

1738              ','

1739                 "P_26"

1740              ','

1741                 "P_27"

1742              ','

1743                 "P_28"

1744              ','

1745                 "P_29"

1746              ','

1747                 "P_30"

1748              ','

1749                 "P_31"

1750              ','

1751                 "P_32"

1752              ','

1753                 "P_33"

1754              ','

1755                 "P_34"

1756              ','

1757                 "P_35"

1758              ','

1759                 "P_36"

1760              ','

1761                 "P_37"

1762              ','

1763                 "P_38"

1764              ','

1765                 "P_39"

1766              ','

1767                 "P_40"

1768              ','

1769                 "P_41"

1770              ','

1771                 "P_42"

1772              ','

1773                 "P_43"

328                                                        The SAS
System                            15:50 Friday, November 21, 2008

1774              ','

1775                 "P_44"

1776              ','

1777                 "P_45"

1778              ','

1779                 "P_46"

1780              ','

1781                 "P_47"

1782              ','

1783                 "P_48"

1784              ','

1785                 "P_49"

1786              ','

1787                 "P_50"

1788              ','

1789                 "P_51"

1790              ','

1791                 "P_52"

1792              ','

1793                 "P_53"

1794              ','

1795                 "P_54"

1796              ','

1797                 "P_55"

1798              ','

1799                 "P_56"

1800              ','

1801                 "P_57"

1802              ','

1803                 "P_58"

1804              ','

1805                 "P_59"

1806              ','

1807                 "P_60"

1808              ','

1809                 "P_61"

1810              ','

1811                 "P_62"

1812              ','

1813                 "P_63"

1814              ','

1815                 "P_64"

1816              ','

1817                 "P_65"

1818              ','

1819                 "P_66"

1820              ','

1821                 "P_67"

1822              ','

1823                 "P_68"

1824              ','

1825                 "P_69"

1826              ','

1827                 "P_70"

329                                                        The SAS
System                            15:50 Friday, November 21, 2008

1828              ','

1829                 "P_71"

1830              ','

1831                 "P_72"

1832              ','

1833                 "P_73"

1834              ','

1835                 "P_74"

1836              ','

1837                 "P_75"

1838              ','

1839                 "P_76"

1840              ','

1841                 "P_77"

1842              ','

1843                 "P_78"

1844              ','

1845                 "P_79"

1846              ','

1847                 "P_80"

1848              ','

1849                 "P_81"

1850              ','

1851                 "P_82"

1852              ','

1853                 "P_83"

1854              ','

1855                 "P_84"

1856              ','

1857                 "P_85"

1858              ','

1859                 "P_86"

1860              ','

1861                 "P_87"

1862              ','

1863                 "P_88"

1864              ','

1865                 "P_89"

1866              ','

1867                 "P_90"

1868              ','

1869                 "P_91"

1870              ','

1871                 "P_92"

1872              ','

1873                 "P_93"

1874              ','

1875                 "P_94"

1876              ','

1877                 "P_95"

1878              ','

1879                 "P_96"

1880              ','

1881                 "P_97"

330                                                        The SAS
System                            15:50 Friday, November 21, 2008

1882              ','

1883                 "P_98"

1884              ','

1885                 "P_99"

1886              ;

1887            end;

1888          set  TEMP4.LOW_FF   end=EFIEOD;

1889              format P_A best12. ;

1890              format P_100 best12. ;

1891              format P_0 best12. ;

1892              format P_1 best12. ;

1893              format P_2 best12. ;

1894              format P_3 best12. ;

1895              format P_4 best12. ;

1896              format P_5 best12. ;

1897              format P_6 best12. ;

1898              format P_7 best12. ;

1899              format P_8 best12. ;

1900              format P_9 best12. ;

1901              format P_10 best12. ;

1902              format P_11 best12. ;

1903              format P_12 best12. ;

1904              format P_13 best12. ;

1905              format P_14 best12. ;

1906              format P_15 best12. ;

1907              format P_16 best12. ;

1908              format P_17 best12. ;

1909              format P_18 best12. ;

1910              format P_19 best12. ;

1911              format P_20 best12. ;

1912              format P_21 best12. ;

1913              format P_22 best12. ;

1914              format P_23 best12. ;

1915              format P_24 best12. ;

1916              format P_25 best12. ;

1917              format P_26 best12. ;

1918              format P_27 best12. ;

1919              format P_28 best12. ;

1920              format P_29 best12. ;

1921              format P_30 best12. ;

1922              format P_31 best12. ;

1923              format P_32 best12. ;

1924              format P_33 best12. ;

1925              format P_34 best12. ;

1926              format P_35 best12. ;

1927              format P_36 best12. ;

1928              format P_37 best12. ;

1929              format P_38 best12. ;

1930              format P_39 best12. ;

1931              format P_40 best12. ;

1932              format P_41 best12. ;

1933              format P_42 best12. ;

1934              format P_43 best12. ;

1935              format P_44 best12. ;

331                                                        The SAS
System                            15:50 Friday, November 21, 2008

1936              format P_45 best12. ;

1937              format P_46 best12. ;

1938              format P_47 best12. ;

1939              format P_48 best12. ;

1940              format P_49 best12. ;

1941              format P_50 best12. ;

1942              format P_51 best12. ;

1943              format P_52 best12. ;

1944              format P_53 best12. ;

1945              format P_54 best12. ;

1946              format P_55 best12. ;

1947              format P_56 best12. ;

1948              format P_57 best12. ;

1949              format P_58 best12. ;

1950              format P_59 best12. ;

1951              format P_60 best12. ;

1952              format P_61 best12. ;

1953              format P_62 best12. ;

1954              format P_63 best12. ;

1955              format P_64 best12. ;

1956              format P_65 best12. ;

1957              format P_66 best12. ;

1958              format P_67 best12. ;

1959              format P_68 best12. ;

1960              format P_69 best12. ;

1961              format P_70 best12. ;

1962              format P_71 best12. ;

1963              format P_72 best12. ;

1964              format P_73 best12. ;

1965              format P_74 best12. ;

1966              format P_75 best12. ;

1967              format P_76 best12. ;

1968              format P_77 best12. ;

1969              format P_78 best12. ;

1970              format P_79 best12. ;

1971              format P_80 best12. ;

1972              format P_81 best12. ;

1973              format P_82 best12. ;

1974              format P_83 best12. ;

1975              format P_84 best12. ;

1976              format P_85 best12. ;

1977              format P_86 best12. ;

1978              format P_87 best12. ;

1979              format P_88 best12. ;

1980              format P_89 best12. ;

1981              format P_90 best12. ;

1982              format P_91 best12. ;

1983              format P_92 best12. ;

1984              format P_93 best12. ;

1985              format P_94 best12. ;

1986              format P_95 best12. ;

1987              format P_96 best12. ;

1988              format P_97 best12. ;

1989              format P_98 best12. ;

332                                                        The SAS
System                            15:50 Friday, November 21, 2008

1990              format P_99 best12. ;

1991            do;

1992              EFIOUT + 1;

1993              put P_A @;

1994              put P_100 @;

1995              put P_0 @;

1996              put P_1 @;

1997              put P_2 @;

1998              put P_3 @;

1999              put P_4 @;

2000              put P_5 @;

2001              put P_6 @;

2002              put P_7 @;

2003              put P_8 @;

2004              put P_9 @;

2005              put P_10 @;

2006              put P_11 @;

2007              put P_12 @;

2008              put P_13 @;

2009              put P_14 @;

2010              put P_15 @;

2011              put P_16 @;

2012              put P_17 @;

2013              put P_18 @;

2014              put P_19 @;

2015              put P_20 @;

2016              put P_21 @;

2017              put P_22 @;

2018              put P_23 @;

2019              put P_24 @;

2020              put P_25 @;

2021              put P_26 @;

2022              put P_27 @;

2023              put P_28 @;

2024              put P_29 @;

2025              put P_30 @;

2026              put P_31 @;

2027              put P_32 @;

2028              put P_33 @;

2029              put P_34 @;

2030              put P_35 @;

2031              put P_36 @;

2032              put P_37 @;

2033              put P_38 @;

2034              put P_39 @;

2035              put P_40 @;

2036              put P_41 @;

2037              put P_42 @;

2038              put P_43 @;

2039              put P_44 @;

2040              put P_45 @;

2041              put P_46 @;

2042              put P_47 @;

2043              put P_48 @;

333                                                        The SAS
System                            15:50 Friday, November 21, 2008

2044              put P_49 @;

2045              put P_50 @;

2046              put P_51 @;

2047              put P_52 @;

2048              put P_53 @;

2049              put P_54 @;

2050              put P_55 @;

2051              put P_56 @;

2052              put P_57 @;

2053              put P_58 @;

2054              put P_59 @;

2055              put P_60 @;

2056              put P_61 @;

2057              put P_62 @;

2058              put P_63 @;

2059              put P_64 @;

2060              put P_65 @;

2061              put P_66 @;

2062              put P_67 @;

2063              put P_68 @;

2064              put P_69 @;

2065              put P_70 @;

2066              put P_71 @;

2067              put P_72 @;

2068              put P_73 @;

2069              put P_74 @;

2070              put P_75 @;

2071              put P_76 @;

2072              put P_77 @;

2073              put P_78 @;

2074              put P_79 @;

2075              put P_80 @;

2076              put P_81 @;

2077              put P_82 @;

2078              put P_83 @;

2079              put P_84 @;

2080              put P_85 @;

2081              put P_86 @;

2082              put P_87 @;

2083              put P_88 @;

2084              put P_89 @;

2085              put P_90 @;

2086              put P_91 @;

2087              put P_92 @;

2088              put P_93 @;

2089              put P_94 @;

2090              put P_95 @;

2091              put P_96 @;

2092              put P_97 @;

2093              put P_98 @;

2094              put P_99 ;

2095              ;

2096            end;

2097           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

334                                                        The SAS
System                            15:50 Friday, November 21, 2008

2098           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

2099           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_FF.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_FF.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:15:53:55,

      Create Time=21Nov2008:15:53:55

NOTE: 2 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_FF.csv'.

      The minimum record length was 323.

      The maximum record length was 499.

NOTE: There were 1 observations read from the data set TEMP4.LOW_FF.

NOTE: DATA statement used (Total process time):

      real time           0.03 seconds

      cpu time            0.00 seconds

      

1 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_FF.csv from TEMP4.LOW_FF.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_FF.csv" file was successfully created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.09 seconds

      cpu time            0.06 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: Deleting WORK.D10 (memtype=DATA).

NOTE: Deleting WORK.D11 (memtype=DATA).

NOTE: Deleting WORK.D2 (memtype=DATA).

NOTE: Deleting WORK.D3 (memtype=DATA).

NOTE: Deleting WORK.D4 (memtype=DATA).

NOTE: Deleting WORK.D5 (memtype=DATA).

NOTE: Deleting WORK.D6 (memtype=DATA).

NOTE: Deleting WORK.D7 (memtype=DATA).

NOTE: Deleting WORK.D8 (memtype=DATA).

NOTE: Deleting WORK.D9 (memtype=DATA).

NOTE: Deleting WORK.X (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Copying TEMP3.HIGHCOMM3 to WORK.HIGHCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHCOMM3.

NOTE: The data set WORK.HIGHCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHCRUISE3 to WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHCRUISE3.

NOTE: The data set WORK.HIGHCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFBARGE3 to WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFBARGE3.

335                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.HIGHFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFSHIPS3 to WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFSHIPS3.

NOTE: The data set WORK.HIGHFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHPASS3 to WORK.HIGHPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHPASS3.

NOTE: The data set WORK.HIGHPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHREC3 to WORK.HIGHREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHREC3.

NOTE: The data set WORK.HIGHREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.HIGHTBARGE3 to WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTBARGE3.

NOTE: The data set WORK.HIGHTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHTSHIPS3 to WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTSHIPS3.

NOTE: The data set WORK.HIGHTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHUTILITY3 to WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHUTILITY3.

NOTE: The data set WORK.HIGHUTILITY3 has 11 observations and 1
variables.

NOTE: Copying TEMP3.LOWCOMM3 to WORK.LOWCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWCOMM3.

NOTE: The data set WORK.LOWCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWCRUISE3 to WORK.LOWCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWCRUISE3.

NOTE: The data set WORK.LOWCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFBARGE3 to WORK.LOWFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFBARGE3.

NOTE: The data set WORK.LOWFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFSHIPS3 to WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFSHIPS3.

NOTE: The data set WORK.LOWFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWPASS3 to WORK.LOWPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWPASS3.

NOTE: The data set WORK.LOWPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWREC3 to WORK.LOWREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWREC3.

NOTE: The data set WORK.LOWREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.LOWTBARGE3 to WORK.LOWTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTBARGE3.

NOTE: The data set WORK.LOWTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWTSHIPS3 to WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTSHIPS3.

NOTE: The data set WORK.LOWTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWUTILITY3 to WORK.LOWUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWUTILITY3.

NOTE: The data set WORK.LOWUTILITY3 has 11 observations and 1 variables.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting TEMP.LOWOUTDATA_FF (memtype=DATA).

NOTE: Deleting TEMP.LOW_FF (memtype=DATA).

336                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.N (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: The file WORK.D1 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A1 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D1.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 11 observations read from the data set WORK.A1.

NOTE: The data set WORK.D1 has 11 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

337                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A2 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A2.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 22 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A3 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A3.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 33 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

338                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A4 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A4.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 44 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A5 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

339                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A5.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 55 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A6 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A6 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A6.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 66 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

340                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A7 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A7.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 77 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A8 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D1.

341                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set WORK.A8.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 88 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A9 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A9.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 99 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

342                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A10 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A10.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 110 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A11 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A11.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 121 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

343                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D7 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCRUISE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A1 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D7.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 121 observations read from the data set WORK.A1.

NOTE: The data set WORK.D7 has 121 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCRUISE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

344                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A2 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D7.

NOTE: There were 121 observations read from the data set WORK.A2.

NOTE: 121 observations added.

NOTE: The data set WORK.D7 has 242 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCRUISE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A3 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D7.

NOTE: There were 121 observations read from the data set WORK.A3.

NOTE: 121 observations added.

NOTE: The data set WORK.D7 has 363 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

345                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCRUISE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A4 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D7.

NOTE: There were 121 observations read from the data set WORK.A4.

NOTE: 121 observations added.

NOTE: The data set WORK.D7 has 484 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCRUISE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

346                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A5 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D7.

NOTE: There were 121 observations read from the data set WORK.A5.

NOTE: 121 observations added.

NOTE: The data set WORK.D7 has 605 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCRUISE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A6 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A6 to WORK.D7.

NOTE: There were 121 observations read from the data set WORK.A6.

NOTE: 121 observations added.

NOTE: The data set WORK.D7 has 726 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

347                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCRUISE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A7 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D7.

NOTE: There were 121 observations read from the data set WORK.A7.

NOTE: 121 observations added.

NOTE: The data set WORK.D7 has 847 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCRUISE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A8 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

348                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Appending WORK.A8 to WORK.D7.

NOTE: There were 121 observations read from the data set WORK.A8.

NOTE: 121 observations added.

NOTE: The data set WORK.D7 has 968 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCRUISE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A9 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D7.

NOTE: There were 121 observations read from the data set WORK.A9.

NOTE: 121 observations added.

NOTE: The data set WORK.D7 has 1089 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

349                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set WORK.LOWCRUISE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A10 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D7.

NOTE: There were 121 observations read from the data set WORK.A10.

NOTE: 121 observations added.

NOTE: The data set WORK.D7 has 1210 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCRUISE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A11 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D7.

NOTE: There were 121 observations read from the data set WORK.A11.

NOTE: 121 observations added.

350                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.D7 has 1331 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D1A (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D1B (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1331 observations read from the data set WORK.D7.

NOTE: The data set TEMP.LOW_DP has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D2 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

351                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: The file WORK.D6 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D3 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D9 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D10 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D4 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D8 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D5 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.HIGHCOMM3 (memtype=DATA).

NOTE: Deleting WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHPASS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHREC3 (memtype=DATA).

352                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.LOWCOMM3 (memtype=DATA).

NOTE: Deleting WORK.LOWCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWPASS3 (memtype=DATA).

NOTE: Deleting WORK.LOWREC3 (memtype=DATA).

NOTE: Deleting WORK.LOWTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.LARGE2 created, with 1331 rows and 13 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Variable cf_cost is uninitialized.

NOTE: Variable fb_cost is uninitialized.

NOTE: Variable fs_cost is uninitialized.

NOTE: Variable rs_cost is uninitialized.

NOTE: Variable tb_cost is uninitialized.

NOTE: Variable ts_cost is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1331 at 2099:164   1331 at 2099:188   1331 at 2099:212   1331 at
2099:16    1331 at 2099:40    1331 at 2099:64

NOTE: There were 1331 observations read from the data set WORK.LARGE2.

NOTE: The data set WORK.LARGE3 has 1331 observations and 20 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.LARGE3A created, with 1331 rows and 31 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

353                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.LARGE3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1331 observations read from the data set WORK.LARGE3A.

NOTE: The data set WORK.LARGE3B has 1331 observations and 43 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE3A (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.LARGE4 created, with 1331 rows and 34 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1331 observations read from the data set WORK.LARGE4.

NOTE: The data set TEMP4.LARGE4 has 1331 observations and 34 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE3B (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1331 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L1 has 1331 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

354                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1331 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L2 has 1331 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1331 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L3 has 1331 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1331 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L4 has 1331 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1331 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L5 has 1331 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1331 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L6 has 1331 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1331 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L7 has 1331 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1331 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L8 has 1331 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

355                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.01 seconds

      

NOTE: There were 1331 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L9 has 1331 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1331 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L10 has 1331 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1331 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L11 has 1331 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1331 observations read from the data set WORK.L1.

NOTE: There were 1331 observations read from the data set WORK.L2.

NOTE: There were 1331 observations read from the data set WORK.L3.

NOTE: There were 1331 observations read from the data set WORK.L4.

NOTE: There were 1331 observations read from the data set WORK.L5.

NOTE: There were 1331 observations read from the data set WORK.L6.

NOTE: There were 1331 observations read from the data set WORK.L7.

NOTE: There were 1331 observations read from the data set WORK.L8.

NOTE: There were 1331 observations read from the data set WORK.L9.

NOTE: There were 1331 observations read from the data set WORK.L10.

NOTE: There were 1331 observations read from the data set WORK.L11.

NOTE: The data set WORK.L has 14641 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.L1 (memtype=DATA).

NOTE: Deleting WORK.L2 (memtype=DATA).

NOTE: Deleting WORK.L3 (memtype=DATA).

NOTE: Deleting WORK.L4 (memtype=DATA).

NOTE: Deleting WORK.L5 (memtype=DATA).

NOTE: Deleting WORK.L6 (memtype=DATA).

NOTE: Deleting WORK.L7 (memtype=DATA).

NOTE: Deleting WORK.L8 (memtype=DATA).

NOTE: Deleting WORK.L9 (memtype=DATA).

NOTE: Deleting WORK.L10 (memtype=DATA).

356                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.L11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 14641 observations read from the data set WORK.L.

NOTE: The data set WORK.L has 14641 observations and 2 variables.

NOTE: PROCEDURE SORT used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The data set TEMP4.LOW_DP has 1 observations and 102 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.L (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1331 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.LARGE5 has 1331 observations and 46 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.X created, with 3 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D1 created, with 3 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

357                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D2 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D3 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D4 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D5 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D6 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D7 created, with 1 rows and 3 columns.

358                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D8 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D9 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D10 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D11 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.17 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 3 observations read from the data set WORK.D1.

359                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 2 observations read from the data set WORK.D2.

NOTE: There were 1 observations read from the data set WORK.D3.

NOTE: There were 1 observations read from the data set WORK.D4.

NOTE: There were 1 observations read from the data set WORK.D5.

NOTE: There were 1 observations read from the data set WORK.D6.

NOTE: There were 1 observations read from the data set WORK.D7.

NOTE: There were 1 observations read from the data set WORK.D8.

NOTE: There were 1 observations read from the data set WORK.D9.

NOTE: There were 1 observations read from the data set WORK.D10.

NOTE: There were 1 observations read from the data set WORK.D11.

NOTE: The data set TEMP.LOWOUTDATA_DP has 3 observations and 13
variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

2100       
/**********************************************************************

2101        *   PRODUCT:   SAS

2102        *   VERSION:   9.2

2103        *   CREATOR:   External File Interface

2104        *   DATE:      21NOV08

2105        *   DESC:      Generated SAS Datastep Code

2106        *   TEMPLATE SOURCE:  (None Specified.)

2107       
***********************************************************************/

2108           data _null_;

2109           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

2110           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

2111           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_DP.csv' delimiter=',' DSD

2111     ! DROPOVER lrecl=32767;

2112           if _n_ = 1 then        /* write column names or labels */

2113            do;

2114              put

2115                 "NAICS"

2116              ','

2117                 "D"

2118              ','

2119                 "percent1"

2120              ','

2121                 "percent2"

2122              ','

2123                 "percent3"

2124              ','

2125                 "percent4"

2126              ','

2127                 "percent5"

2128              ','

2129                 "percent6"

2130              ','

2131                 "percent7"

2132              ','

2133                 "percent8"

2134              ','

2135                 "percent9"

360                                                        The SAS
System                            15:50 Friday, November 21, 2008

2136              ','

2137                 "percent10"

2138              ','

2139                 "percent11"

2140              ;

2141            end;

2142          set  TEMP.LOWOUTDATA_DP   end=EFIEOD;

2143              format NAICS $16. ;

2144              format D best12. ;

2145              format percent1 percent8.2 ;

2146              format percent2 percent8.2 ;

2147              format percent3 percent8.2 ;

2148              format percent4 percent8.2 ;

2149              format percent5 percent8.2 ;

2150              format percent6 percent8.2 ;

2151              format percent7 percent8.2 ;

2152              format percent8 percent8.2 ;

2153              format percent9 percent8.2 ;

2154              format percent10 percent8.2 ;

2155              format percent11 percent8.2 ;

2156            do;

2157              EFIOUT + 1;

2158              put NAICS $ @;

2159              put D @;

2160              put percent1 @;

2161              put percent2 @;

2162              put percent3 @;

2163              put percent4 @;

2164              put percent5 @;

2165              put percent6 @;

2166              put percent7 @;

2167              put percent8 @;

2168              put percent9 @;

2169              put percent10 @;

2170              put percent11 ;

2171              ;

2172            end;

2173           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

2174           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

2175           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_DP.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_DP.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:15:53:56,

      Create Time=21Nov2008:15:53:56

NOTE: 4 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_DP.csv'.

      The minimum record length was 31.

      The maximum record length was 108.

NOTE: There were 3 observations read from the data set
TEMP.LOWOUTDATA_DP.

NOTE: At least one W.D format was too small for the number to be
printed. The decimal may be shifted by the "BEST" format.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

361                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.01 seconds

      

3 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_DP.csv from TEMP.LOWOUTDATA_DP.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_DP.csv" file was successfully
created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

2176       
/**********************************************************************

2177        *   PRODUCT:   SAS

2178        *   VERSION:   9.2

2179        *   CREATOR:   External File Interface

2180        *   DATE:      21NOV08

2181        *   DESC:      Generated SAS Datastep Code

2182        *   TEMPLATE SOURCE:  (None Specified.)

2183       
***********************************************************************/

2184           data _null_;

2185           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

2186           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

2187           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_DP.csv' delimiter=',' DSD DROPOVER

2187     ! lrecl=32767;

2188           if _n_ = 1 then        /* write column names or labels */

2189            do;

2190              put

2191                 "P_A"

2192              ','

2193                 "P_100"

2194              ','

2195                 "P_0"

2196              ','

2197                 "P_1"

2198              ','

2199                 "P_2"

2200              ','

2201                 "P_3"

2202              ','

2203                 "P_4"

2204              ','

2205                 "P_5"

2206              ','

2207                 "P_6"

2208              ','

2209                 "P_7"

2210              ','

2211                 "P_8"

2212              ','

2213                 "P_9"

2214              ','

2215                 "P_10"

362                                                        The SAS
System                            15:50 Friday, November 21, 2008

2216              ','

2217                 "P_11"

2218              ','

2219                 "P_12"

2220              ','

2221                 "P_13"

2222              ','

2223                 "P_14"

2224              ','

2225                 "P_15"

2226              ','

2227                 "P_16"

2228              ','

2229                 "P_17"

2230              ','

2231                 "P_18"

2232              ','

2233                 "P_19"

2234              ','

2235                 "P_20"

2236              ','

2237                 "P_21"

2238              ','

2239                 "P_22"

2240              ','

2241                 "P_23"

2242              ','

2243                 "P_24"

2244              ','

2245                 "P_25"

2246              ','

2247                 "P_26"

2248              ','

2249                 "P_27"

2250              ','

2251                 "P_28"

2252              ','

2253                 "P_29"

2254              ','

2255                 "P_30"

2256              ','

2257                 "P_31"

2258              ','

2259                 "P_32"

2260              ','

2261                 "P_33"

2262              ','

2263                 "P_34"

2264              ','

2265                 "P_35"

2266              ','

2267                 "P_36"

2268              ','

2269                 "P_37"

363                                                        The SAS
System                            15:50 Friday, November 21, 2008

2270              ','

2271                 "P_38"

2272              ','

2273                 "P_39"

2274              ','

2275                 "P_40"

2276              ','

2277                 "P_41"

2278              ','

2279                 "P_42"

2280              ','

2281                 "P_43"

2282              ','

2283                 "P_44"

2284              ','

2285                 "P_45"

2286              ','

2287                 "P_46"

2288              ','

2289                 "P_47"

2290              ','

2291                 "P_48"

2292              ','

2293                 "P_49"

2294              ','

2295                 "P_50"

2296              ','

2297                 "P_51"

2298              ','

2299                 "P_52"

2300              ','

2301                 "P_53"

2302              ','

2303                 "P_54"

2304              ','

2305                 "P_55"

2306              ','

2307                 "P_56"

2308              ','

2309                 "P_57"

2310              ','

2311                 "P_58"

2312              ','

2313                 "P_59"

2314              ','

2315                 "P_60"

2316              ','

2317                 "P_61"

2318              ','

2319                 "P_62"

2320              ','

2321                 "P_63"

2322              ','

2323                 "P_64"

364                                                        The SAS
System                            15:50 Friday, November 21, 2008

2324              ','

2325                 "P_65"

2326              ','

2327                 "P_66"

2328              ','

2329                 "P_67"

2330              ','

2331                 "P_68"

2332              ','

2333                 "P_69"

2334              ','

2335                 "P_70"

2336              ','

2337                 "P_71"

2338              ','

2339                 "P_72"

2340              ','

2341                 "P_73"

2342              ','

2343                 "P_74"

2344              ','

2345                 "P_75"

2346              ','

2347                 "P_76"

2348              ','

2349                 "P_77"

2350              ','

2351                 "P_78"

2352              ','

2353                 "P_79"

2354              ','

2355                 "P_80"

2356              ','

2357                 "P_81"

2358              ','

2359                 "P_82"

2360              ','

2361                 "P_83"

2362              ','

2363                 "P_84"

2364              ','

2365                 "P_85"

2366              ','

2367                 "P_86"

2368              ','

2369                 "P_87"

2370              ','

2371                 "P_88"

2372              ','

2373                 "P_89"

2374              ','

2375                 "P_90"

2376              ','

2377                 "P_91"

365                                                        The SAS
System                            15:50 Friday, November 21, 2008

2378              ','

2379                 "P_92"

2380              ','

2381                 "P_93"

2382              ','

2383                 "P_94"

2384              ','

2385                 "P_95"

2386              ','

2387                 "P_96"

2388              ','

2389                 "P_97"

2390              ','

2391                 "P_98"

2392              ','

2393                 "P_99"

2394              ;

2395            end;

2396          set  TEMP4.LOW_DP   end=EFIEOD;

2397              format P_A best12. ;

2398              format P_100 best12. ;

2399              format P_0 best12. ;

2400              format P_1 best12. ;

2401              format P_2 best12. ;

2402              format P_3 best12. ;

2403              format P_4 best12. ;

2404              format P_5 best12. ;

2405              format P_6 best12. ;

2406              format P_7 best12. ;

2407              format P_8 best12. ;

2408              format P_9 best12. ;

2409              format P_10 best12. ;

2410              format P_11 best12. ;

2411              format P_12 best12. ;

2412              format P_13 best12. ;

2413              format P_14 best12. ;

2414              format P_15 best12. ;

2415              format P_16 best12. ;

2416              format P_17 best12. ;

2417              format P_18 best12. ;

2418              format P_19 best12. ;

2419              format P_20 best12. ;

2420              format P_21 best12. ;

2421              format P_22 best12. ;

2422              format P_23 best12. ;

2423              format P_24 best12. ;

2424              format P_25 best12. ;

2425              format P_26 best12. ;

2426              format P_27 best12. ;

2427              format P_28 best12. ;

2428              format P_29 best12. ;

2429              format P_30 best12. ;

2430              format P_31 best12. ;

2431              format P_32 best12. ;

366                                                        The SAS
System                            15:50 Friday, November 21, 2008

2432              format P_33 best12. ;

2433              format P_34 best12. ;

2434              format P_35 best12. ;

2435              format P_36 best12. ;

2436              format P_37 best12. ;

2437              format P_38 best12. ;

2438              format P_39 best12. ;

2439              format P_40 best12. ;

2440              format P_41 best12. ;

2441              format P_42 best12. ;

2442              format P_43 best12. ;

2443              format P_44 best12. ;

2444              format P_45 best12. ;

2445              format P_46 best12. ;

2446              format P_47 best12. ;

2447              format P_48 best12. ;

2448              format P_49 best12. ;

2449              format P_50 best12. ;

2450              format P_51 best12. ;

2451              format P_52 best12. ;

2452              format P_53 best12. ;

2453              format P_54 best12. ;

2454              format P_55 best12. ;

2455              format P_56 best12. ;

2456              format P_57 best12. ;

2457              format P_58 best12. ;

2458              format P_59 best12. ;

2459              format P_60 best12. ;

2460              format P_61 best12. ;

2461              format P_62 best12. ;

2462              format P_63 best12. ;

2463              format P_64 best12. ;

2464              format P_65 best12. ;

2465              format P_66 best12. ;

2466              format P_67 best12. ;

2467              format P_68 best12. ;

2468              format P_69 best12. ;

2469              format P_70 best12. ;

2470              format P_71 best12. ;

2471              format P_72 best12. ;

2472              format P_73 best12. ;

2473              format P_74 best12. ;

2474              format P_75 best12. ;

2475              format P_76 best12. ;

2476              format P_77 best12. ;

2477              format P_78 best12. ;

2478              format P_79 best12. ;

2479              format P_80 best12. ;

2480              format P_81 best12. ;

2481              format P_82 best12. ;

2482              format P_83 best12. ;

2483              format P_84 best12. ;

2484              format P_85 best12. ;

2485              format P_86 best12. ;

367                                                        The SAS
System                            15:50 Friday, November 21, 2008

2486              format P_87 best12. ;

2487              format P_88 best12. ;

2488              format P_89 best12. ;

2489              format P_90 best12. ;

2490              format P_91 best12. ;

2491              format P_92 best12. ;

2492              format P_93 best12. ;

2493              format P_94 best12. ;

2494              format P_95 best12. ;

2495              format P_96 best12. ;

2496              format P_97 best12. ;

2497              format P_98 best12. ;

2498              format P_99 best12. ;

2499            do;

2500              EFIOUT + 1;

2501              put P_A @;

2502              put P_100 @;

2503              put P_0 @;

2504              put P_1 @;

2505              put P_2 @;

2506              put P_3 @;

2507              put P_4 @;

2508              put P_5 @;

2509              put P_6 @;

2510              put P_7 @;

2511              put P_8 @;

2512              put P_9 @;

2513              put P_10 @;

2514              put P_11 @;

2515              put P_12 @;

2516              put P_13 @;

2517              put P_14 @;

2518              put P_15 @;

2519              put P_16 @;

2520              put P_17 @;

2521              put P_18 @;

2522              put P_19 @;

2523              put P_20 @;

2524              put P_21 @;

2525              put P_22 @;

2526              put P_23 @;

2527              put P_24 @;

2528              put P_25 @;

2529              put P_26 @;

2530              put P_27 @;

2531              put P_28 @;

2532              put P_29 @;

2533              put P_30 @;

2534              put P_31 @;

2535              put P_32 @;

2536              put P_33 @;

2537              put P_34 @;

2538              put P_35 @;

2539              put P_36 @;

368                                                        The SAS
System                            15:50 Friday, November 21, 2008

2540              put P_37 @;

2541              put P_38 @;

2542              put P_39 @;

2543              put P_40 @;

2544              put P_41 @;

2545              put P_42 @;

2546              put P_43 @;

2547              put P_44 @;

2548              put P_45 @;

2549              put P_46 @;

2550              put P_47 @;

2551              put P_48 @;

2552              put P_49 @;

2553              put P_50 @;

2554              put P_51 @;

2555              put P_52 @;

2556              put P_53 @;

2557              put P_54 @;

2558              put P_55 @;

2559              put P_56 @;

2560              put P_57 @;

2561              put P_58 @;

2562              put P_59 @;

2563              put P_60 @;

2564              put P_61 @;

2565              put P_62 @;

2566              put P_63 @;

2567              put P_64 @;

2568              put P_65 @;

2569              put P_66 @;

2570              put P_67 @;

2571              put P_68 @;

2572              put P_69 @;

2573              put P_70 @;

2574              put P_71 @;

2575              put P_72 @;

2576              put P_73 @;

2577              put P_74 @;

2578              put P_75 @;

2579              put P_76 @;

2580              put P_77 @;

2581              put P_78 @;

2582              put P_79 @;

2583              put P_80 @;

2584              put P_81 @;

2585              put P_82 @;

2586              put P_83 @;

2587              put P_84 @;

2588              put P_85 @;

2589              put P_86 @;

2590              put P_87 @;

2591              put P_88 @;

2592              put P_89 @;

2593              put P_90 @;

369                                                        The SAS
System                            15:50 Friday, November 21, 2008

2594              put P_91 @;

2595              put P_92 @;

2596              put P_93 @;

2597              put P_94 @;

2598              put P_95 @;

2599              put P_96 @;

2600              put P_97 @;

2601              put P_98 @;

2602              put P_99 ;

2603              ;

2604            end;

2605           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

2606           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

2607           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_DP.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_DP.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:15:53:56,

      Create Time=21Nov2008:15:53:56

NOTE: 2 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_DP.csv'.

      The minimum record length was 499.

      The maximum record length was 1308.

NOTE: There were 1 observations read from the data set TEMP4.LOW_DP.

NOTE: DATA statement used (Total process time):

      real time           0.07 seconds

      cpu time            0.03 seconds

      

1 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_DP.csv from TEMP4.LOW_DP.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_DP.csv" file was successfully created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.10 seconds

      cpu time            0.06 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: Deleting WORK.D10 (memtype=DATA).

NOTE: Deleting WORK.D11 (memtype=DATA).

NOTE: Deleting WORK.D2 (memtype=DATA).

NOTE: Deleting WORK.D3 (memtype=DATA).

NOTE: Deleting WORK.D4 (memtype=DATA).

NOTE: Deleting WORK.D5 (memtype=DATA).

NOTE: Deleting WORK.D6 (memtype=DATA).

NOTE: Deleting WORK.D7 (memtype=DATA).

NOTE: Deleting WORK.D8 (memtype=DATA).

NOTE: Deleting WORK.D9 (memtype=DATA).

NOTE: Deleting WORK.X (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

370                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.01 seconds

      

NOTE: Copying TEMP3.HIGHCOMM3 to WORK.HIGHCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHCOMM3.

NOTE: The data set WORK.HIGHCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHCRUISE3 to WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHCRUISE3.

NOTE: The data set WORK.HIGHCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFBARGE3 to WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFBARGE3.

NOTE: The data set WORK.HIGHFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFSHIPS3 to WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFSHIPS3.

NOTE: The data set WORK.HIGHFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHPASS3 to WORK.HIGHPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHPASS3.

NOTE: The data set WORK.HIGHPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHREC3 to WORK.HIGHREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHREC3.

NOTE: The data set WORK.HIGHREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.HIGHTBARGE3 to WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTBARGE3.

NOTE: The data set WORK.HIGHTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHTSHIPS3 to WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTSHIPS3.

NOTE: The data set WORK.HIGHTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHUTILITY3 to WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHUTILITY3.

NOTE: The data set WORK.HIGHUTILITY3 has 11 observations and 1
variables.

NOTE: Copying TEMP3.LOWCOMM3 to WORK.LOWCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWCOMM3.

NOTE: The data set WORK.LOWCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWCRUISE3 to WORK.LOWCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWCRUISE3.

NOTE: The data set WORK.LOWCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFBARGE3 to WORK.LOWFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFBARGE3.

NOTE: The data set WORK.LOWFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFSHIPS3 to WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFSHIPS3.

NOTE: The data set WORK.LOWFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWPASS3 to WORK.LOWPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWPASS3.

NOTE: The data set WORK.LOWPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWREC3 to WORK.LOWREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWREC3.

NOTE: The data set WORK.LOWREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.LOWTBARGE3 to WORK.LOWTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTBARGE3.

NOTE: The data set WORK.LOWTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWTSHIPS3 to WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTSHIPS3.

371                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.LOWTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWUTILITY3 to WORK.LOWUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWUTILITY3.

NOTE: The data set WORK.LOWUTILITY3 has 11 observations and 1 variables.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting TEMP.LOWOUTDATA_DP (memtype=DATA).

NOTE: Deleting TEMP.LOW_DP (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.N (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: The file WORK.D1 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A1 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D1.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 11 observations read from the data set WORK.A1.

NOTE: The data set WORK.D1 has 11 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

372                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A2 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A2.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 22 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A3 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

373                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Appending WORK.A3 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A3.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 33 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A4 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A4 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A4.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 44 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

374                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A5 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A5.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 55 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A6 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A6.

NOTE: 11 observations added.

375                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.D1 has 66 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A7 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A7.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 77 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

376                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A8 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A8.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 88 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A9 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A9.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 99 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

377                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A10 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A10.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 110 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A11 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

378                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A11.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 121 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D1A (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A1 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D1A.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 121 observations read from the data set WORK.A1.

NOTE: The data set WORK.D1A has 121 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

379                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A2 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A2.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 242 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

380                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.A3 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A3.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 363 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A4 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A4.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 484 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

381                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A5 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A5.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 605 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A6 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

382                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A6 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A6.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 726 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A7 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A7.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 847 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

383                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A8 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A8.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 968 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A9 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A9 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A9.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 1089 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

384                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A10 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A10.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 1210 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

385                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A11 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A11.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 1331 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D2 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A1 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

386                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D2.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 1331 observations read from the data set WORK.A1.

NOTE: The data set WORK.D2 has 1331 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A2 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A2.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 2662 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

387                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A3 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A3 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A3.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 3993 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A4 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A4.

388                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 5324 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A5 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A5.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 6655 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

389                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A6 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A6.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 7986 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A7 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A7 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A7.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 9317 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

390                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A8 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A8.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 10648 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A9 has 1331 observations and 4 variables.

391                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A9.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 11979 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A10 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A10.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 13310 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

392                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A11 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A11.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 14641 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D1A (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D1B (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D7 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

393                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: The file WORK.D3 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A1 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D3.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 14641 observations read from the data set WORK.A1.

NOTE: The data set WORK.D3 has 14641 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

394                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A2 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A2.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 29282 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A3 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A3.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 43923 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

395                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A4 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A4 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A4.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 58564 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A5 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

396                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A5 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A5.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 73205 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A6 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A6 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A6.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 87846 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

397                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A7 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A7.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 102487 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A8 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A8.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 117128 observations and 5 variables.

398                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A9 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A9.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 131769 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

399                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A10 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A10.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 146410 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A11 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A11 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A11.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 161051 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

400                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D6 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D4 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A1 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A1 to WORK.D4.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 161051 observations read from the data set WORK.A1.

NOTE: The data set WORK.D4 has 161051 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

401                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A2 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           1.59 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A2 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A2.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 322102 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A3 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

402                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.03 seconds

      

NOTE: Appending WORK.A3 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A3.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 483153 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A4 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: Appending WORK.A4 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A4.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 644204 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.78 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

403                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set WORK.LOWCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A5 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A5 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A5.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 805255 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.12 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A6 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: Appending WORK.A6 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A6.

404                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 966306 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.17 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A7 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: Appending WORK.A7 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A7.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 1127357 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.34 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

405                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A8 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: Appending WORK.A8 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A8.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 1288408 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.04 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A9 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: Appending WORK.A9 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A9.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 1449459 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

406                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A10 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A10 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A10.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 1610510 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A11 has 161051 observations and 6 variables.

407                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: Appending WORK.A11 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A11.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 1771561 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D9 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D10 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D5 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

408                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1771561 observations read from the data set WORK.D4.

NOTE: The data set WORK.A1 has 1771561 observations and 7 variables.

NOTE: DATA statement used (Total process time):

      real time           4.06 seconds

      cpu time            0.61 seconds

      

NOTE: Appending WORK.A1 to WORK.D5.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 1771561 observations read from the data set WORK.A1.

NOTE: The data set WORK.D5 has 1771561 observations and 7 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           1.84 seconds

      cpu time            0.28 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           2.56 seconds

      cpu time            0.03 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1771561 observations read from the data set WORK.D4.

NOTE: The data set WORK.A2 has 1771561 observations and 7 variables.

NOTE: DATA statement used (Total process time):

      real time           2.70 seconds

      cpu time            0.70 seconds

      

NOTE: Appending WORK.A2 to WORK.D5.

NOTE: There were 1771561 observations read from the data set WORK.A2.

NOTE: 1771561 observations added.

NOTE: The data set WORK.D5 has 3543122 observations and 7 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           2.03 seconds

409                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.35 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           4.07 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1771561 observations read from the data set WORK.D4.

NOTE: The data set WORK.A3 has 1771561 observations and 7 variables.

NOTE: DATA statement used (Total process time):

      real time           3.67 seconds

      cpu time            0.59 seconds

      

NOTE: Appending WORK.A3 to WORK.D5.

NOTE: There were 1771561 observations read from the data set WORK.A3.

NOTE: 1771561 observations added.

NOTE: The data set WORK.D5 has 5314683 observations and 7 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           1.01 seconds

      cpu time            0.25 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           2.18 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

410                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1771561 observations read from the data set WORK.D4.

NOTE: The data set WORK.A4 has 1771561 observations and 7 variables.

NOTE: DATA statement used (Total process time):

      real time           0.65 seconds

      cpu time            0.64 seconds

      

NOTE: Appending WORK.A4 to WORK.D5.

NOTE: There were 1771561 observations read from the data set WORK.A4.

NOTE: 1771561 observations added.

NOTE: The data set WORK.D5 has 7086244 observations and 7 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           1.07 seconds

      cpu time            0.31 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           4.07 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1771561 observations read from the data set WORK.D4.

NOTE: The data set WORK.A5 has 1771561 observations and 7 variables.

NOTE: DATA statement used (Total process time):

      real time           0.59 seconds

      cpu time            0.57 seconds

      

NOTE: Appending WORK.A5 to WORK.D5.

NOTE: There were 1771561 observations read from the data set WORK.A5.

NOTE: 1771561 observations added.

NOTE: The data set WORK.D5 has 8857805 observations and 7 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           1.32 seconds

      cpu time            0.32 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

411                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1771561 observations read from the data set WORK.D4.

NOTE: The data set WORK.A6 has 1771561 observations and 7 variables.

NOTE: DATA statement used (Total process time):

      real time           0.62 seconds

      cpu time            0.62 seconds

      

NOTE: Appending WORK.A6 to WORK.D5.

NOTE: There were 1771561 observations read from the data set WORK.A6.

NOTE: 1771561 observations added.

NOTE: The data set WORK.D5 has 10629366 observations and 7 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           1.36 seconds

      cpu time            0.31 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           4.07 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1771561 observations read from the data set WORK.D4.

NOTE: The data set WORK.A7 has 1771561 observations and 7 variables.

NOTE: DATA statement used (Total process time):

      real time           0.59 seconds

      cpu time            0.54 seconds

      

412                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A7 to WORK.D5.

NOTE: There were 1771561 observations read from the data set WORK.A7.

NOTE: 1771561 observations added.

NOTE: The data set WORK.D5 has 12400927 observations and 7 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           1.34 seconds

      cpu time            0.23 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           4.07 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1771561 observations read from the data set WORK.D4.

NOTE: The data set WORK.A8 has 1771561 observations and 7 variables.

NOTE: DATA statement used (Total process time):

      real time           0.59 seconds

      cpu time            0.57 seconds

      

NOTE: Appending WORK.A8 to WORK.D5.

NOTE: There were 1771561 observations read from the data set WORK.A8.

NOTE: 1771561 observations added.

NOTE: The data set WORK.D5 has 14172488 observations and 7 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           1.31 seconds

      cpu time            0.29 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           4.07 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTSHIPS3.

413                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1771561 observations read from the data set WORK.D4.

NOTE: The data set WORK.A9 has 1771561 observations and 7 variables.

NOTE: DATA statement used (Total process time):

      real time           0.59 seconds

      cpu time            0.57 seconds

      

NOTE: Appending WORK.A9 to WORK.D5.

NOTE: There were 1771561 observations read from the data set WORK.A9.

NOTE: 1771561 observations added.

NOTE: The data set WORK.D5 has 15944049 observations and 7 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           1.34 seconds

      cpu time            0.34 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           4.06 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1771561 observations read from the data set WORK.D4.

NOTE: The data set WORK.A10 has 1771561 observations and 7 variables.

NOTE: DATA statement used (Total process time):

      real time           0.59 seconds

      cpu time            0.57 seconds

      

NOTE: Appending WORK.A10 to WORK.D5.

NOTE: There were 1771561 observations read from the data set WORK.A10.

NOTE: 1771561 observations added.

NOTE: The data set WORK.D5 has 17715610 observations and 7 variables.

414                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE APPEND used (Total process time):

      real time           1.31 seconds

      cpu time            0.34 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1771561 observations read from the data set WORK.D4.

NOTE: The data set WORK.A11 has 1771561 observations and 7 variables.

NOTE: DATA statement used (Total process time):

      real time           0.59 seconds

      cpu time            0.59 seconds

      

NOTE: Appending WORK.A11 to WORK.D5.

NOTE: There were 1771561 observations read from the data set WORK.A11.

NOTE: 1771561 observations added.

NOTE: The data set WORK.D5 has 19487171 observations and 7 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           1.39 seconds

      cpu time            0.31 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           4.06 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D8 (memtype=DATA) was not found, but appears on a
DELETE statement.

415                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 19487171 observations read from the data set WORK.D5.

NOTE: The data set TEMP.LOW_IF has 19487171 observations and 8
variables.

NOTE: DATA statement used (Total process time):

      real time           12.09 seconds

      cpu time            7.45 seconds

      

NOTE: Deleting WORK.D5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           1.54 seconds

      cpu time            0.06 seconds

      

NOTE: Deleting WORK.HIGHCOMM3 (memtype=DATA).

NOTE: Deleting WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHPASS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHREC3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.LOWCOMM3 (memtype=DATA).

NOTE: Deleting WORK.LOWCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWPASS3 (memtype=DATA).

NOTE: Deleting WORK.LOWREC3 (memtype=DATA).

NOTE: Deleting WORK.LOWTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.LARGE2 created, with 19487171 rows and 17 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           33.23 seconds

      cpu time            37.71 seconds

      

NOTE: Variable cs_cost is uninitialized.

416                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Variable rs_cost is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      19487171 at 2607:140   19487171 at 2607:16    

NOTE: There were 19487171 observations read from the data set
WORK.LARGE2.

NOTE: The data set WORK.LARGE3 has 19487171 observations and 20
variables.

NOTE: DATA statement used (Total process time):

      real time           23.35 seconds

      cpu time            18.43 seconds

      

NOTE: Deleting WORK.LARGE2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           3.67 seconds

      cpu time            0.34 seconds

      

NOTE: Table WORK.LARGE3A created, with 19487171 rows and 31 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           2:04.89

      cpu time            1:02.85

      

NOTE: Deleting WORK.LARGE3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           3.93 seconds

      cpu time            0.42 seconds

      

NOTE: There were 19487171 observations read from the data set
WORK.LARGE3A.

NOTE: The data set WORK.LARGE3B has 19487171 observations and 43
variables.

NOTE: DATA statement used (Total process time):

      real time           1:19.67

      cpu time            29.18 seconds

      

NOTE: Deleting WORK.LARGE3A (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           4.28 seconds

      cpu time            0.59 seconds

      

NOTE: Table WORK.LARGE4 created, with 19487171 rows and 34 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           2:13.40

      cpu time            56.34 seconds

      

417                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 19487171 observations read from the data set
WORK.LARGE4.

NOTE: The data set TEMP4.LARGE4 has 19487171 observations and 34
variables.

NOTE: DATA statement used (Total process time):

      real time           2:14.20

      cpu time            22.71 seconds

      

NOTE: Deleting WORK.LARGE3B (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           5.26 seconds

      cpu time            0.64 seconds

      

NOTE: There were 19487171 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L1 has 19487171 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           1:56.09

      cpu time            8.03 seconds

      

NOTE: There were 19487171 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L2 has 19487171 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           11.09 seconds

      cpu time            7.12 seconds

      

NOTE: There were 19487171 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L3 has 19487171 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           9.98 seconds

      cpu time            7.12 seconds

      

NOTE: There were 19487171 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L4 has 19487171 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           12.00 seconds

      cpu time            8.45 seconds

      

NOTE: There were 19487171 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L5 has 19487171 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           10.98 seconds

      cpu time            8.43 seconds

      

418                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 19487171 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L6 has 19487171 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           11.01 seconds

      cpu time            8.45 seconds

      

NOTE: There were 19487171 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L7 has 19487171 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           11.01 seconds

      cpu time            8.43 seconds

      

NOTE: There were 19487171 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L8 has 19487171 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           12.00 seconds

      cpu time            8.57 seconds

      

NOTE: There were 19487171 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L9 has 19487171 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           11.00 seconds

      cpu time            8.37 seconds

      

NOTE: There were 19487171 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L10 has 19487171 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           12.06 seconds

      cpu time            8.67 seconds

      

NOTE: There were 19487171 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L11 has 19487171 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           11.92 seconds

      cpu time            8.56 seconds

      

NOTE: There were 19487171 observations read from the data set WORK.L1.

NOTE: There were 19487171 observations read from the data set WORK.L2.

NOTE: There were 19487171 observations read from the data set WORK.L3.

NOTE: There were 19487171 observations read from the data set WORK.L4.

NOTE: There were 19487171 observations read from the data set WORK.L5.

419                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 19487171 observations read from the data set WORK.L6.

NOTE: There were 19487171 observations read from the data set WORK.L7.

NOTE: There were 19487171 observations read from the data set WORK.L8.

NOTE: There were 19487171 observations read from the data set WORK.L9.

NOTE: There were 19487171 observations read from the data set WORK.L10.

NOTE: There were 19487171 observations read from the data set WORK.L11.

NOTE: The data set WORK.L has 214358881 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           45.53 seconds

      cpu time            40.93 seconds

      

NOTE: Deleting WORK.L1 (memtype=DATA).

NOTE: Deleting WORK.L2 (memtype=DATA).

NOTE: Deleting WORK.L3 (memtype=DATA).

NOTE: Deleting WORK.L4 (memtype=DATA).

NOTE: Deleting WORK.L5 (memtype=DATA).

NOTE: Deleting WORK.L6 (memtype=DATA).

NOTE: Deleting WORK.L7 (memtype=DATA).

NOTE: Deleting WORK.L8 (memtype=DATA).

NOTE: Deleting WORK.L9 (memtype=DATA).

NOTE: Deleting WORK.L10 (memtype=DATA).

NOTE: Deleting WORK.L11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.28 seconds

      cpu time            0.07 seconds

      

NOTE: There were 214358881 observations read from the data set WORK.L.

NOTE: The data set WORK.L has 214358881 observations and 2 variables.

NOTE: PROCEDURE SORT used (Total process time):

      real time           2:54.61

      cpu time            3:53.51

      

NOTE: The data set TEMP4.LOW_IF has 1 observations and 102 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           1:14.23

      cpu time            1:10.53

      

NOTE: Deleting WORK.L (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           4.51 seconds

      cpu time            0.42 seconds

      

NOTE: There were 19487171 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.LARGE5 has 19487171 observations and 46
variables.

NOTE: DATA statement used (Total process time):

420                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           3:21.38

      cpu time            38.73 seconds

      

NOTE: Deleting WORK.LARGE4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.28 seconds

      cpu time            0.26 seconds

      

NOTE: Table WORK.X created, with 3 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D1 created, with 3 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           14.53 seconds

      cpu time            20.79 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D2 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           17.07 seconds

      cpu time            19.70 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D3 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           14.90 seconds

      cpu time            19.54 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D4 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           14.01 seconds

      cpu time            19.40 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

421                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Table WORK.D5 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           14.06 seconds

      cpu time            19.85 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D6 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           15.00 seconds

      cpu time            19.84 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D7 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           14.00 seconds

      cpu time            19.42 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D8 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           17.09 seconds

      cpu time            19.10 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D9 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           14.93 seconds

      cpu time            19.54 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D10 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           13.96 seconds

422                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            19.40 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D11 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           15.01 seconds

      cpu time            19.82 seconds

      

NOTE: Deleting WORK.LARGE5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           6.56 seconds

      cpu time            0.89 seconds

      

NOTE: There were 3 observations read from the data set WORK.D1.

NOTE: There were 2 observations read from the data set WORK.D2.

NOTE: There were 1 observations read from the data set WORK.D3.

NOTE: There were 1 observations read from the data set WORK.D4.

NOTE: There were 1 observations read from the data set WORK.D5.

NOTE: There were 1 observations read from the data set WORK.D6.

NOTE: There were 1 observations read from the data set WORK.D7.

NOTE: There were 2 observations read from the data set WORK.D8.

NOTE: There were 1 observations read from the data set WORK.D9.

NOTE: There were 1 observations read from the data set WORK.D10.

NOTE: There were 1 observations read from the data set WORK.D11.

NOTE: The data set TEMP.LOWOUTDATA_IF has 3 observations and 13
variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

2608       
/**********************************************************************

2609        *   PRODUCT:   SAS

2610        *   VERSION:   9.2

2611        *   CREATOR:   External File Interface

2612        *   DATE:      21NOV08

2613        *   DESC:      Generated SAS Datastep Code

2614        *   TEMPLATE SOURCE:  (None Specified.)

2615       
***********************************************************************/

2616           data _null_;

2617           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

2618           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

2619           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_IF.csv' delimiter=',' DSD

2619     ! DROPOVER lrecl=32767;

2620           if _n_ = 1 then        /* write column names or labels */

2621            do;

423                                                        The SAS
System                            15:50 Friday, November 21, 2008

2622              put

2623                 "NAICS"

2624              ','

2625                 "D"

2626              ','

2627                 "percent1"

2628              ','

2629                 "percent2"

2630              ','

2631                 "percent3"

2632              ','

2633                 "percent4"

2634              ','

2635                 "percent5"

2636              ','

2637                 "percent6"

2638              ','

2639                 "percent7"

2640              ','

2641                 "percent8"

2642              ','

2643                 "percent9"

2644              ','

2645                 "percent10"

2646              ','

2647                 "percent11"

2648              ;

2649            end;

2650          set  TEMP.LOWOUTDATA_IF   end=EFIEOD;

2651              format NAICS $16. ;

2652              format D best12. ;

2653              format percent1 percent8.2 ;

2654              format percent2 percent8.2 ;

2655              format percent3 percent8.2 ;

2656              format percent4 percent8.2 ;

2657              format percent5 percent8.2 ;

2658              format percent6 percent8.2 ;

2659              format percent7 percent8.2 ;

2660              format percent8 percent8.2 ;

2661              format percent9 percent8.2 ;

2662              format percent10 percent8.2 ;

2663              format percent11 percent8.2 ;

2664            do;

2665              EFIOUT + 1;

2666              put NAICS $ @;

2667              put D @;

2668              put percent1 @;

2669              put percent2 @;

2670              put percent3 @;

2671              put percent4 @;

2672              put percent5 @;

2673              put percent6 @;

2674              put percent7 @;

2675              put percent8 @;

424                                                        The SAS
System                            15:50 Friday, November 21, 2008

2676              put percent9 @;

2677              put percent10 @;

2678              put percent11 ;

2679              ;

2680            end;

2681           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

2682           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

2683           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_IF.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_IF.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:19:26,

      Create Time=21Nov2008:16:19:26

NOTE: 4 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_IF.csv'.

      The minimum record length was 24.

      The maximum record length was 108.

NOTE: There were 3 observations read from the data set
TEMP.LOWOUTDATA_IF.

NOTE: At least one W.D format was too small for the number to be
printed. The decimal may be shifted by the "BEST" format.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

3 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_IF.csv from TEMP.LOWOUTDATA_IF.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_IF.csv" file was successfully
created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.29 seconds

      cpu time            0.03 seconds

      

2684       
/**********************************************************************

2685        *   PRODUCT:   SAS

2686        *   VERSION:   9.2

2687        *   CREATOR:   External File Interface

2688        *   DATE:      21NOV08

2689        *   DESC:      Generated SAS Datastep Code

2690        *   TEMPLATE SOURCE:  (None Specified.)

2691       
***********************************************************************/

2692           data _null_;

2693           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

2694           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

2695           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_IF.csv' delimiter=',' DSD DROPOVER

2695     ! lrecl=32767;

2696           if _n_ = 1 then        /* write column names or labels */

2697            do;

2698              put

2699                 "P_A"

2700              ','

2701                 "P_100"

425                                                        The SAS
System                            15:50 Friday, November 21, 2008

2702              ','

2703                 "P_0"

2704              ','

2705                 "P_1"

2706              ','

2707                 "P_2"

2708              ','

2709                 "P_3"

2710              ','

2711                 "P_4"

2712              ','

2713                 "P_5"

2714              ','

2715                 "P_6"

2716              ','

2717                 "P_7"

2718              ','

2719                 "P_8"

2720              ','

2721                 "P_9"

2722              ','

2723                 "P_10"

2724              ','

2725                 "P_11"

2726              ','

2727                 "P_12"

2728              ','

2729                 "P_13"

2730              ','

2731                 "P_14"

2732              ','

2733                 "P_15"

2734              ','

2735                 "P_16"

2736              ','

2737                 "P_17"

2738              ','

2739                 "P_18"

2740              ','

2741                 "P_19"

2742              ','

2743                 "P_20"

2744              ','

2745                 "P_21"

2746              ','

2747                 "P_22"

2748              ','

2749                 "P_23"

2750              ','

2751                 "P_24"

2752              ','

2753                 "P_25"

2754              ','

2755                 "P_26"

426                                                        The SAS
System                            15:50 Friday, November 21, 2008

2756              ','

2757                 "P_27"

2758              ','

2759                 "P_28"

2760              ','

2761                 "P_29"

2762              ','

2763                 "P_30"

2764              ','

2765                 "P_31"

2766              ','

2767                 "P_32"

2768              ','

2769                 "P_33"

2770              ','

2771                 "P_34"

2772              ','

2773                 "P_35"

2774              ','

2775                 "P_36"

2776              ','

2777                 "P_37"

2778              ','

2779                 "P_38"

2780              ','

2781                 "P_39"

2782              ','

2783                 "P_40"

2784              ','

2785                 "P_41"

2786              ','

2787                 "P_42"

2788              ','

2789                 "P_43"

2790              ','

2791                 "P_44"

2792              ','

2793                 "P_45"

2794              ','

2795                 "P_46"

2796              ','

2797                 "P_47"

2798              ','

2799                 "P_48"

2800              ','

2801                 "P_49"

2802              ','

2803                 "P_50"

2804              ','

2805                 "P_51"

2806              ','

2807                 "P_52"

2808              ','

2809                 "P_53"

427                                                        The SAS
System                            15:50 Friday, November 21, 2008

2810              ','

2811                 "P_54"

2812              ','

2813                 "P_55"

2814              ','

2815                 "P_56"

2816              ','

2817                 "P_57"

2818              ','

2819                 "P_58"

2820              ','

2821                 "P_59"

2822              ','

2823                 "P_60"

2824              ','

2825                 "P_61"

2826              ','

2827                 "P_62"

2828              ','

2829                 "P_63"

2830              ','

2831                 "P_64"

2832              ','

2833                 "P_65"

2834              ','

2835                 "P_66"

2836              ','

2837                 "P_67"

2838              ','

2839                 "P_68"

2840              ','

2841                 "P_69"

2842              ','

2843                 "P_70"

2844              ','

2845                 "P_71"

2846              ','

2847                 "P_72"

2848              ','

2849                 "P_73"

2850              ','

2851                 "P_74"

2852              ','

2853                 "P_75"

2854              ','

2855                 "P_76"

2856              ','

2857                 "P_77"

2858              ','

2859                 "P_78"

2860              ','

2861                 "P_79"

2862              ','

2863                 "P_80"

428                                                        The SAS
System                            15:50 Friday, November 21, 2008

2864              ','

2865                 "P_81"

2866              ','

2867                 "P_82"

2868              ','

2869                 "P_83"

2870              ','

2871                 "P_84"

2872              ','

2873                 "P_85"

2874              ','

2875                 "P_86"

2876              ','

2877                 "P_87"

2878              ','

2879                 "P_88"

2880              ','

2881                 "P_89"

2882              ','

2883                 "P_90"

2884              ','

2885                 "P_91"

2886              ','

2887                 "P_92"

2888              ','

2889                 "P_93"

2890              ','

2891                 "P_94"

2892              ','

2893                 "P_95"

2894              ','

2895                 "P_96"

2896              ','

2897                 "P_97"

2898              ','

2899                 "P_98"

2900              ','

2901                 "P_99"

2902              ;

2903            end;

2904          set  TEMP4.LOW_IF   end=EFIEOD;

2905              format P_A best12. ;

2906              format P_100 best12. ;

2907              format P_0 best12. ;

2908              format P_1 best12. ;

2909              format P_2 best12. ;

2910              format P_3 best12. ;

2911              format P_4 best12. ;

2912              format P_5 best12. ;

2913              format P_6 best12. ;

2914              format P_7 best12. ;

2915              format P_8 best12. ;

2916              format P_9 best12. ;

2917              format P_10 best12. ;

429                                                        The SAS
System                            15:50 Friday, November 21, 2008

2918              format P_11 best12. ;

2919              format P_12 best12. ;

2920              format P_13 best12. ;

2921              format P_14 best12. ;

2922              format P_15 best12. ;

2923              format P_16 best12. ;

2924              format P_17 best12. ;

2925              format P_18 best12. ;

2926              format P_19 best12. ;

2927              format P_20 best12. ;

2928              format P_21 best12. ;

2929              format P_22 best12. ;

2930              format P_23 best12. ;

2931              format P_24 best12. ;

2932              format P_25 best12. ;

2933              format P_26 best12. ;

2934              format P_27 best12. ;

2935              format P_28 best12. ;

2936              format P_29 best12. ;

2937              format P_30 best12. ;

2938              format P_31 best12. ;

2939              format P_32 best12. ;

2940              format P_33 best12. ;

2941              format P_34 best12. ;

2942              format P_35 best12. ;

2943              format P_36 best12. ;

2944              format P_37 best12. ;

2945              format P_38 best12. ;

2946              format P_39 best12. ;

2947              format P_40 best12. ;

2948              format P_41 best12. ;

2949              format P_42 best12. ;

2950              format P_43 best12. ;

2951              format P_44 best12. ;

2952              format P_45 best12. ;

2953              format P_46 best12. ;

2954              format P_47 best12. ;

2955              format P_48 best12. ;

2956              format P_49 best12. ;

2957              format P_50 best12. ;

2958              format P_51 best12. ;

2959              format P_52 best12. ;

2960              format P_53 best12. ;

2961              format P_54 best12. ;

2962              format P_55 best12. ;

2963              format P_56 best12. ;

2964              format P_57 best12. ;

2965              format P_58 best12. ;

2966              format P_59 best12. ;

2967              format P_60 best12. ;

2968              format P_61 best12. ;

2969              format P_62 best12. ;

2970              format P_63 best12. ;

2971              format P_64 best12. ;

430                                                        The SAS
System                            15:50 Friday, November 21, 2008

2972              format P_65 best12. ;

2973              format P_66 best12. ;

2974              format P_67 best12. ;

2975              format P_68 best12. ;

2976              format P_69 best12. ;

2977              format P_70 best12. ;

2978              format P_71 best12. ;

2979              format P_72 best12. ;

2980              format P_73 best12. ;

2981              format P_74 best12. ;

2982              format P_75 best12. ;

2983              format P_76 best12. ;

2984              format P_77 best12. ;

2985              format P_78 best12. ;

2986              format P_79 best12. ;

2987              format P_80 best12. ;

2988              format P_81 best12. ;

2989              format P_82 best12. ;

2990              format P_83 best12. ;

2991              format P_84 best12. ;

2992              format P_85 best12. ;

2993              format P_86 best12. ;

2994              format P_87 best12. ;

2995              format P_88 best12. ;

2996              format P_89 best12. ;

2997              format P_90 best12. ;

2998              format P_91 best12. ;

2999              format P_92 best12. ;

3000              format P_93 best12. ;

3001              format P_94 best12. ;

3002              format P_95 best12. ;

3003              format P_96 best12. ;

3004              format P_97 best12. ;

3005              format P_98 best12. ;

3006              format P_99 best12. ;

3007            do;

3008              EFIOUT + 1;

3009              put P_A @;

3010              put P_100 @;

3011              put P_0 @;

3012              put P_1 @;

3013              put P_2 @;

3014              put P_3 @;

3015              put P_4 @;

3016              put P_5 @;

3017              put P_6 @;

3018              put P_7 @;

3019              put P_8 @;

3020              put P_9 @;

3021              put P_10 @;

3022              put P_11 @;

3023              put P_12 @;

3024              put P_13 @;

3025              put P_14 @;

431                                                        The SAS
System                            15:50 Friday, November 21, 2008

3026              put P_15 @;

3027              put P_16 @;

3028              put P_17 @;

3029              put P_18 @;

3030              put P_19 @;

3031              put P_20 @;

3032              put P_21 @;

3033              put P_22 @;

3034              put P_23 @;

3035              put P_24 @;

3036              put P_25 @;

3037              put P_26 @;

3038              put P_27 @;

3039              put P_28 @;

3040              put P_29 @;

3041              put P_30 @;

3042              put P_31 @;

3043              put P_32 @;

3044              put P_33 @;

3045              put P_34 @;

3046              put P_35 @;

3047              put P_36 @;

3048              put P_37 @;

3049              put P_38 @;

3050              put P_39 @;

3051              put P_40 @;

3052              put P_41 @;

3053              put P_42 @;

3054              put P_43 @;

3055              put P_44 @;

3056              put P_45 @;

3057              put P_46 @;

3058              put P_47 @;

3059              put P_48 @;

3060              put P_49 @;

3061              put P_50 @;

3062              put P_51 @;

3063              put P_52 @;

3064              put P_53 @;

3065              put P_54 @;

3066              put P_55 @;

3067              put P_56 @;

3068              put P_57 @;

3069              put P_58 @;

3070              put P_59 @;

3071              put P_60 @;

3072              put P_61 @;

3073              put P_62 @;

3074              put P_63 @;

3075              put P_64 @;

3076              put P_65 @;

3077              put P_66 @;

3078              put P_67 @;

3079              put P_68 @;

432                                                        The SAS
System                            15:50 Friday, November 21, 2008

3080              put P_69 @;

3081              put P_70 @;

3082              put P_71 @;

3083              put P_72 @;

3084              put P_73 @;

3085              put P_74 @;

3086              put P_75 @;

3087              put P_76 @;

3088              put P_77 @;

3089              put P_78 @;

3090              put P_79 @;

3091              put P_80 @;

3092              put P_81 @;

3093              put P_82 @;

3094              put P_83 @;

3095              put P_84 @;

3096              put P_85 @;

3097              put P_86 @;

3098              put P_87 @;

3099              put P_88 @;

3100              put P_89 @;

3101              put P_90 @;

3102              put P_91 @;

3103              put P_92 @;

3104              put P_93 @;

3105              put P_94 @;

3106              put P_95 @;

3107              put P_96 @;

3108              put P_97 @;

3109              put P_98 @;

3110              put P_99 ;

3111              ;

3112            end;

3113           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

3114           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

3115           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_IF.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_IF.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:19:26,

      Create Time=21Nov2008:16:19:26

NOTE: 2 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_IF.csv'.

      The minimum record length was 499.

      The maximum record length was 1317.

NOTE: There were 1 observations read from the data set TEMP4.LOW_IF.

NOTE: DATA statement used (Total process time):

      real time           0.03 seconds

      cpu time            0.01 seconds

      

1 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_IF.csv from TEMP4.LOW_IF.

  

433                                                        The SAS
System                            15:50 Friday, November 21, 2008

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_IF.csv" file was successfully created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.06 seconds

      cpu time            0.04 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: Deleting WORK.D10 (memtype=DATA).

NOTE: Deleting WORK.D11 (memtype=DATA).

NOTE: Deleting WORK.D2 (memtype=DATA).

NOTE: Deleting WORK.D3 (memtype=DATA).

NOTE: Deleting WORK.D4 (memtype=DATA).

NOTE: Deleting WORK.D5 (memtype=DATA).

NOTE: Deleting WORK.D6 (memtype=DATA).

NOTE: Deleting WORK.D7 (memtype=DATA).

NOTE: Deleting WORK.D8 (memtype=DATA).

NOTE: Deleting WORK.D9 (memtype=DATA).

NOTE: Deleting WORK.X (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Copying TEMP3.HIGHCOMM3 to WORK.HIGHCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHCOMM3.

NOTE: The data set WORK.HIGHCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHCRUISE3 to WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHCRUISE3.

NOTE: The data set WORK.HIGHCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFBARGE3 to WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFBARGE3.

NOTE: The data set WORK.HIGHFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFSHIPS3 to WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFSHIPS3.

NOTE: The data set WORK.HIGHFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHPASS3 to WORK.HIGHPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHPASS3.

NOTE: The data set WORK.HIGHPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHREC3 to WORK.HIGHREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHREC3.

NOTE: The data set WORK.HIGHREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.HIGHTBARGE3 to WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTBARGE3.

NOTE: The data set WORK.HIGHTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHTSHIPS3 to WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTSHIPS3.

NOTE: The data set WORK.HIGHTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHUTILITY3 to WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHUTILITY3.

NOTE: The data set WORK.HIGHUTILITY3 has 11 observations and 1
variables.

NOTE: Copying TEMP3.LOWCOMM3 to WORK.LOWCOMM3 (memtype=DATA).

434                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set TEMP3.LOWCOMM3.

NOTE: The data set WORK.LOWCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWCRUISE3 to WORK.LOWCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWCRUISE3.

NOTE: The data set WORK.LOWCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFBARGE3 to WORK.LOWFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFBARGE3.

NOTE: The data set WORK.LOWFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFSHIPS3 to WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFSHIPS3.

NOTE: The data set WORK.LOWFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWPASS3 to WORK.LOWPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWPASS3.

NOTE: The data set WORK.LOWPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWREC3 to WORK.LOWREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWREC3.

NOTE: The data set WORK.LOWREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.LOWTBARGE3 to WORK.LOWTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTBARGE3.

NOTE: The data set WORK.LOWTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWTSHIPS3 to WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTSHIPS3.

NOTE: The data set WORK.LOWTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWUTILITY3 to WORK.LOWUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWUTILITY3.

NOTE: The data set WORK.LOWUTILITY3 has 11 observations and 1 variables.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.63 seconds

      cpu time            0.09 seconds

      

NOTE: Deleting TEMP.LOWOUTDATA_IF (memtype=DATA).

NOTE: Deleting TEMP.LOW_IF (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.14 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.N (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: The file WORK.D1 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

435                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A1 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D1.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 11 observations read from the data set WORK.A1.

NOTE: The data set WORK.D1 has 11 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A2 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A2.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 22 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

436                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A3 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A3.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 33 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A4 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

437                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A4.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 44 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A5 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A5.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 55 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

438                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A6 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A6.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 66 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A7 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D1.

439                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set WORK.A7.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 77 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A8 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A8.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 88 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

440                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A9 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A9.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 99 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A10 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A10.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 110 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

441                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A11 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A11.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 121 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set TEMP.LOW_IP has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

442                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D1A (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D1B (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D7 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D2 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D6 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D3 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D9 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D10 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

443                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D4 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D8 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D5 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.HIGHCOMM3 (memtype=DATA).

NOTE: Deleting WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHPASS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHREC3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.LOWCOMM3 (memtype=DATA).

NOTE: Deleting WORK.LOWCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWPASS3 (memtype=DATA).

NOTE: Deleting WORK.LOWREC3 (memtype=DATA).

NOTE: Deleting WORK.LOWTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.LARGE2 created, with 121 rows and 12 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.03 seconds

      cpu time            0.01 seconds

444                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Variable cs_cost is uninitialized.

NOTE: Variable cf_cost is uninitialized.

NOTE: Variable fb_cost is uninitialized.

NOTE: Variable fs_cost is uninitialized.

NOTE: Variable rs_cost is uninitialized.

NOTE: Variable tb_cost is uninitialized.

NOTE: Variable ts_cost is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      121 at 3115:140   121 at 3115:164   121 at 3115:188   121 at
3115:212   121 at 3115:16    121 at 3115:40    121 at 3115:64

NOTE: There were 121 observations read from the data set WORK.LARGE2.

NOTE: The data set WORK.LARGE3 has 121 observations and 20 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.LARGE3A created, with 121 rows and 31 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.LARGE3A.

NOTE: The data set WORK.LARGE3B has 121 observations and 43 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE3A (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

445                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Table WORK.LARGE4 created, with 121 rows and 34 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.LARGE4.

NOTE: The data set TEMP4.LARGE4 has 121 observations and 34 variables.

NOTE: DATA statement used (Total process time):

      real time           0.09 seconds

      cpu time            0.07 seconds

      

NOTE: Deleting WORK.LARGE3B (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 121 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L1 has 121 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L2 has 121 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L3 has 121 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L4 has 121 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

446                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 121 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L5 has 121 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L6 has 121 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L7 has 121 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L8 has 121 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L9 has 121 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L10 has 121 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L11 has 121 observations and 2 variables.

NOTE: DATA statement used (Total process time):

447                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.L1.

NOTE: There were 121 observations read from the data set WORK.L2.

NOTE: There were 121 observations read from the data set WORK.L3.

NOTE: There were 121 observations read from the data set WORK.L4.

NOTE: There were 121 observations read from the data set WORK.L5.

NOTE: There were 121 observations read from the data set WORK.L6.

NOTE: There were 121 observations read from the data set WORK.L7.

NOTE: There were 121 observations read from the data set WORK.L8.

NOTE: There were 121 observations read from the data set WORK.L9.

NOTE: There were 121 observations read from the data set WORK.L10.

NOTE: There were 121 observations read from the data set WORK.L11.

NOTE: The data set WORK.L has 1331 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.L1 (memtype=DATA).

NOTE: Deleting WORK.L2 (memtype=DATA).

NOTE: Deleting WORK.L3 (memtype=DATA).

NOTE: Deleting WORK.L4 (memtype=DATA).

NOTE: Deleting WORK.L5 (memtype=DATA).

NOTE: Deleting WORK.L6 (memtype=DATA).

NOTE: Deleting WORK.L7 (memtype=DATA).

NOTE: Deleting WORK.L8 (memtype=DATA).

NOTE: Deleting WORK.L9 (memtype=DATA).

NOTE: Deleting WORK.L10 (memtype=DATA).

NOTE: Deleting WORK.L11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1331 observations read from the data set WORK.L.

NOTE: The data set WORK.L has 1331 observations and 2 variables.

NOTE: PROCEDURE SORT used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The data set TEMP4.LOW_IP has 1 observations and 102 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.L (memtype=DATA).

448                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.LARGE5 has 121 observations and 46 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D1 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D2 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D3 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D4 created, with 1 rows and 3 columns.

449                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D5 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D6 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D7 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D8 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D9 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

450                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D10 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D11 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.LARGE5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 2 observations read from the data set WORK.D1.

NOTE: There were 2 observations read from the data set WORK.D2.

NOTE: There were 1 observations read from the data set WORK.D3.

NOTE: There were 1 observations read from the data set WORK.D4.

NOTE: There were 1 observations read from the data set WORK.D5.

NOTE: There were 1 observations read from the data set WORK.D6.

NOTE: There were 1 observations read from the data set WORK.D7.

NOTE: There were 1 observations read from the data set WORK.D8.

NOTE: There were 1 observations read from the data set WORK.D9.

NOTE: There were 1 observations read from the data set WORK.D10.

NOTE: There were 1 observations read from the data set WORK.D11.

NOTE: The data set TEMP.LOWOUTDATA_IP has 3 observations and 13
variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

3116       
/**********************************************************************

3117        *   PRODUCT:   SAS

3118        *   VERSION:   9.2

3119        *   CREATOR:   External File Interface

3120        *   DATE:      21NOV08

3121        *   DESC:      Generated SAS Datastep Code

451                                                        The SAS
System                            15:50 Friday, November 21, 2008

3122        *   TEMPLATE SOURCE:  (None Specified.)

3123       
***********************************************************************/

3124           data _null_;

3125           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

3126           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

3127           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_IP.csv' delimiter=',' DSD

3127     ! DROPOVER lrecl=32767;

3128           if _n_ = 1 then        /* write column names or labels */

3129            do;

3130              put

3131                 "NAICS"

3132              ','

3133                 "D"

3134              ','

3135                 "percent1"

3136              ','

3137                 "percent2"

3138              ','

3139                 "percent3"

3140              ','

3141                 "percent4"

3142              ','

3143                 "percent5"

3144              ','

3145                 "percent6"

3146              ','

3147                 "percent7"

3148              ','

3149                 "percent8"

3150              ','

3151                 "percent9"

3152              ','

3153                 "percent10"

3154              ','

3155                 "percent11"

3156              ;

3157            end;

3158          set  TEMP.LOWOUTDATA_IP   end=EFIEOD;

3159              format NAICS $16. ;

3160              format D best12. ;

3161              format percent1 percent8.2 ;

3162              format percent2 percent8.2 ;

3163              format percent3 percent8.2 ;

3164              format percent4 percent8.2 ;

3165              format percent5 percent8.2 ;

3166              format percent6 percent8.2 ;

3167              format percent7 percent8.2 ;

3168              format percent8 percent8.2 ;

3169              format percent9 percent8.2 ;

3170              format percent10 percent8.2 ;

3171              format percent11 percent8.2 ;

3172            do;

3173              EFIOUT + 1;

3174              put NAICS $ @;

452                                                        The SAS
System                            15:50 Friday, November 21, 2008

3175              put D @;

3176              put percent1 @;

3177              put percent2 @;

3178              put percent3 @;

3179              put percent4 @;

3180              put percent5 @;

3181              put percent6 @;

3182              put percent7 @;

3183              put percent8 @;

3184              put percent9 @;

3185              put percent10 @;

3186              put percent11 ;

3187              ;

3188            end;

3189           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

3190           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

3191           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_IP.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_IP.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:19:28,

      Create Time=21Nov2008:16:19:28

NOTE: 4 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_IP.csv'.

      The minimum record length was 24.

      The maximum record length was 108.

NOTE: There were 3 observations read from the data set
TEMP.LOWOUTDATA_IP.

NOTE: At least one W.D format was too small for the number to be
printed. The decimal may be shifted by the "BEST" format.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

3 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_IP.csv from TEMP.LOWOUTDATA_IP.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_IP.csv" file was successfully
created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

3192       
/**********************************************************************

3193        *   PRODUCT:   SAS

3194        *   VERSION:   9.2

3195        *   CREATOR:   External File Interface

3196        *   DATE:      21NOV08

3197        *   DESC:      Generated SAS Datastep Code

3198        *   TEMPLATE SOURCE:  (None Specified.)

3199       
***********************************************************************/

3200           data _null_;

3201           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

453                                                        The SAS
System                            15:50 Friday, November 21, 2008

3202           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

3203           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_IP.csv' delimiter=',' DSD DROPOVER

3203     ! lrecl=32767;

3204           if _n_ = 1 then        /* write column names or labels */

3205            do;

3206              put

3207                 "P_A"

3208              ','

3209                 "P_100"

3210              ','

3211                 "P_0"

3212              ','

3213                 "P_1"

3214              ','

3215                 "P_2"

3216              ','

3217                 "P_3"

3218              ','

3219                 "P_4"

3220              ','

3221                 "P_5"

3222              ','

3223                 "P_6"

3224              ','

3225                 "P_7"

3226              ','

3227                 "P_8"

3228              ','

3229                 "P_9"

3230              ','

3231                 "P_10"

3232              ','

3233                 "P_11"

3234              ','

3235                 "P_12"

3236              ','

3237                 "P_13"

3238              ','

3239                 "P_14"

3240              ','

3241                 "P_15"

3242              ','

3243                 "P_16"

3244              ','

3245                 "P_17"

3246              ','

3247                 "P_18"

3248              ','

3249                 "P_19"

3250              ','

3251                 "P_20"

3252              ','

3253                 "P_21"

3254              ','

454                                                        The SAS
System                            15:50 Friday, November 21, 2008

3255                 "P_22"

3256              ','

3257                 "P_23"

3258              ','

3259                 "P_24"

3260              ','

3261                 "P_25"

3262              ','

3263                 "P_26"

3264              ','

3265                 "P_27"

3266              ','

3267                 "P_28"

3268              ','

3269                 "P_29"

3270              ','

3271                 "P_30"

3272              ','

3273                 "P_31"

3274              ','

3275                 "P_32"

3276              ','

3277                 "P_33"

3278              ','

3279                 "P_34"

3280              ','

3281                 "P_35"

3282              ','

3283                 "P_36"

3284              ','

3285                 "P_37"

3286              ','

3287                 "P_38"

3288              ','

3289                 "P_39"

3290              ','

3291                 "P_40"

3292              ','

3293                 "P_41"

3294              ','

3295                 "P_42"

3296              ','

3297                 "P_43"

3298              ','

3299                 "P_44"

3300              ','

3301                 "P_45"

3302              ','

3303                 "P_46"

3304              ','

3305                 "P_47"

3306              ','

3307                 "P_48"

3308              ','

455                                                        The SAS
System                            15:50 Friday, November 21, 2008

3309                 "P_49"

3310              ','

3311                 "P_50"

3312              ','

3313                 "P_51"

3314              ','

3315                 "P_52"

3316              ','

3317                 "P_53"

3318              ','

3319                 "P_54"

3320              ','

3321                 "P_55"

3322              ','

3323                 "P_56"

3324              ','

3325                 "P_57"

3326              ','

3327                 "P_58"

3328              ','

3329                 "P_59"

3330              ','

3331                 "P_60"

3332              ','

3333                 "P_61"

3334              ','

3335                 "P_62"

3336              ','

3337                 "P_63"

3338              ','

3339                 "P_64"

3340              ','

3341                 "P_65"

3342              ','

3343                 "P_66"

3344              ','

3345                 "P_67"

3346              ','

3347                 "P_68"

3348              ','

3349                 "P_69"

3350              ','

3351                 "P_70"

3352              ','

3353                 "P_71"

3354              ','

3355                 "P_72"

3356              ','

3357                 "P_73"

3358              ','

3359                 "P_74"

3360              ','

3361                 "P_75"

3362              ','

456                                                        The SAS
System                            15:50 Friday, November 21, 2008

3363                 "P_76"

3364              ','

3365                 "P_77"

3366              ','

3367                 "P_78"

3368              ','

3369                 "P_79"

3370              ','

3371                 "P_80"

3372              ','

3373                 "P_81"

3374              ','

3375                 "P_82"

3376              ','

3377                 "P_83"

3378              ','

3379                 "P_84"

3380              ','

3381                 "P_85"

3382              ','

3383                 "P_86"

3384              ','

3385                 "P_87"

3386              ','

3387                 "P_88"

3388              ','

3389                 "P_89"

3390              ','

3391                 "P_90"

3392              ','

3393                 "P_91"

3394              ','

3395                 "P_92"

3396              ','

3397                 "P_93"

3398              ','

3399                 "P_94"

3400              ','

3401                 "P_95"

3402              ','

3403                 "P_96"

3404              ','

3405                 "P_97"

3406              ','

3407                 "P_98"

3408              ','

3409                 "P_99"

3410              ;

3411            end;

3412          set  TEMP4.LOW_IP   end=EFIEOD;

3413              format P_A best12. ;

3414              format P_100 best12. ;

3415              format P_0 best12. ;

3416              format P_1 best12. ;

457                                                        The SAS
System                            15:50 Friday, November 21, 2008

3417              format P_2 best12. ;

3418              format P_3 best12. ;

3419              format P_4 best12. ;

3420              format P_5 best12. ;

3421              format P_6 best12. ;

3422              format P_7 best12. ;

3423              format P_8 best12. ;

3424              format P_9 best12. ;

3425              format P_10 best12. ;

3426              format P_11 best12. ;

3427              format P_12 best12. ;

3428              format P_13 best12. ;

3429              format P_14 best12. ;

3430              format P_15 best12. ;

3431              format P_16 best12. ;

3432              format P_17 best12. ;

3433              format P_18 best12. ;

3434              format P_19 best12. ;

3435              format P_20 best12. ;

3436              format P_21 best12. ;

3437              format P_22 best12. ;

3438              format P_23 best12. ;

3439              format P_24 best12. ;

3440              format P_25 best12. ;

3441              format P_26 best12. ;

3442              format P_27 best12. ;

3443              format P_28 best12. ;

3444              format P_29 best12. ;

3445              format P_30 best12. ;

3446              format P_31 best12. ;

3447              format P_32 best12. ;

3448              format P_33 best12. ;

3449              format P_34 best12. ;

3450              format P_35 best12. ;

3451              format P_36 best12. ;

3452              format P_37 best12. ;

3453              format P_38 best12. ;

3454              format P_39 best12. ;

3455              format P_40 best12. ;

3456              format P_41 best12. ;

3457              format P_42 best12. ;

3458              format P_43 best12. ;

3459              format P_44 best12. ;

3460              format P_45 best12. ;

3461              format P_46 best12. ;

3462              format P_47 best12. ;

3463              format P_48 best12. ;

3464              format P_49 best12. ;

3465              format P_50 best12. ;

3466              format P_51 best12. ;

3467              format P_52 best12. ;

3468              format P_53 best12. ;

3469              format P_54 best12. ;

3470              format P_55 best12. ;

458                                                        The SAS
System                            15:50 Friday, November 21, 2008

3471              format P_56 best12. ;

3472              format P_57 best12. ;

3473              format P_58 best12. ;

3474              format P_59 best12. ;

3475              format P_60 best12. ;

3476              format P_61 best12. ;

3477              format P_62 best12. ;

3478              format P_63 best12. ;

3479              format P_64 best12. ;

3480              format P_65 best12. ;

3481              format P_66 best12. ;

3482              format P_67 best12. ;

3483              format P_68 best12. ;

3484              format P_69 best12. ;

3485              format P_70 best12. ;

3486              format P_71 best12. ;

3487              format P_72 best12. ;

3488              format P_73 best12. ;

3489              format P_74 best12. ;

3490              format P_75 best12. ;

3491              format P_76 best12. ;

3492              format P_77 best12. ;

3493              format P_78 best12. ;

3494              format P_79 best12. ;

3495              format P_80 best12. ;

3496              format P_81 best12. ;

3497              format P_82 best12. ;

3498              format P_83 best12. ;

3499              format P_84 best12. ;

3500              format P_85 best12. ;

3501              format P_86 best12. ;

3502              format P_87 best12. ;

3503              format P_88 best12. ;

3504              format P_89 best12. ;

3505              format P_90 best12. ;

3506              format P_91 best12. ;

3507              format P_92 best12. ;

3508              format P_93 best12. ;

3509              format P_94 best12. ;

3510              format P_95 best12. ;

3511              format P_96 best12. ;

3512              format P_97 best12. ;

3513              format P_98 best12. ;

3514              format P_99 best12. ;

3515            do;

3516              EFIOUT + 1;

3517              put P_A @;

3518              put P_100 @;

3519              put P_0 @;

3520              put P_1 @;

3521              put P_2 @;

3522              put P_3 @;

3523              put P_4 @;

3524              put P_5 @;

459                                                        The SAS
System                            15:50 Friday, November 21, 2008

3525              put P_6 @;

3526              put P_7 @;

3527              put P_8 @;

3528              put P_9 @;

3529              put P_10 @;

3530              put P_11 @;

3531              put P_12 @;

3532              put P_13 @;

3533              put P_14 @;

3534              put P_15 @;

3535              put P_16 @;

3536              put P_17 @;

3537              put P_18 @;

3538              put P_19 @;

3539              put P_20 @;

3540              put P_21 @;

3541              put P_22 @;

3542              put P_23 @;

3543              put P_24 @;

3544              put P_25 @;

3545              put P_26 @;

3546              put P_27 @;

3547              put P_28 @;

3548              put P_29 @;

3549              put P_30 @;

3550              put P_31 @;

3551              put P_32 @;

3552              put P_33 @;

3553              put P_34 @;

3554              put P_35 @;

3555              put P_36 @;

3556              put P_37 @;

3557              put P_38 @;

3558              put P_39 @;

3559              put P_40 @;

3560              put P_41 @;

3561              put P_42 @;

3562              put P_43 @;

3563              put P_44 @;

3564              put P_45 @;

3565              put P_46 @;

3566              put P_47 @;

3567              put P_48 @;

3568              put P_49 @;

3569              put P_50 @;

3570              put P_51 @;

3571              put P_52 @;

3572              put P_53 @;

3573              put P_54 @;

3574              put P_55 @;

3575              put P_56 @;

3576              put P_57 @;

3577              put P_58 @;

3578              put P_59 @;

460                                                        The SAS
System                            15:50 Friday, November 21, 2008

3579              put P_60 @;

3580              put P_61 @;

3581              put P_62 @;

3582              put P_63 @;

3583              put P_64 @;

3584              put P_65 @;

3585              put P_66 @;

3586              put P_67 @;

3587              put P_68 @;

3588              put P_69 @;

3589              put P_70 @;

3590              put P_71 @;

3591              put P_72 @;

3592              put P_73 @;

3593              put P_74 @;

3594              put P_75 @;

3595              put P_76 @;

3596              put P_77 @;

3597              put P_78 @;

3598              put P_79 @;

3599              put P_80 @;

3600              put P_81 @;

3601              put P_82 @;

3602              put P_83 @;

3603              put P_84 @;

3604              put P_85 @;

3605              put P_86 @;

3606              put P_87 @;

3607              put P_88 @;

3608              put P_89 @;

3609              put P_90 @;

3610              put P_91 @;

3611              put P_92 @;

3612              put P_93 @;

3613              put P_94 @;

3614              put P_95 @;

3615              put P_96 @;

3616              put P_97 @;

3617              put P_98 @;

3618              put P_99 ;

3619              ;

3620            end;

3621           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

3622           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

3623           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_IP.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_IP.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:19:28,

      Create Time=21Nov2008:16:19:28

NOTE: 2 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_IP.csv'.

      The minimum record length was 499.

461                                                        The SAS
System                            15:50 Friday, November 21, 2008

      The maximum record length was 1317.

NOTE: There were 1 observations read from the data set TEMP4.LOW_IP.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

1 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_IP.csv from TEMP4.LOW_IP.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_IP.csv" file was successfully created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: Deleting WORK.D10 (memtype=DATA).

NOTE: Deleting WORK.D11 (memtype=DATA).

NOTE: Deleting WORK.D2 (memtype=DATA).

NOTE: Deleting WORK.D3 (memtype=DATA).

NOTE: Deleting WORK.D4 (memtype=DATA).

NOTE: Deleting WORK.D5 (memtype=DATA).

NOTE: Deleting WORK.D6 (memtype=DATA).

NOTE: Deleting WORK.D7 (memtype=DATA).

NOTE: Deleting WORK.D8 (memtype=DATA).

NOTE: Deleting WORK.D9 (memtype=DATA).

NOTE: Deleting WORK.X (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Copying TEMP3.HIGHCOMM3 to WORK.HIGHCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHCOMM3.

NOTE: The data set WORK.HIGHCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHCRUISE3 to WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHCRUISE3.

NOTE: The data set WORK.HIGHCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFBARGE3 to WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFBARGE3.

NOTE: The data set WORK.HIGHFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFSHIPS3 to WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFSHIPS3.

NOTE: The data set WORK.HIGHFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHPASS3 to WORK.HIGHPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHPASS3.

NOTE: The data set WORK.HIGHPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHREC3 to WORK.HIGHREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHREC3.

NOTE: The data set WORK.HIGHREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.HIGHTBARGE3 to WORK.HIGHTBARGE3 (memtype=DATA).

462                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTBARGE3.

NOTE: The data set WORK.HIGHTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHTSHIPS3 to WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTSHIPS3.

NOTE: The data set WORK.HIGHTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHUTILITY3 to WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHUTILITY3.

NOTE: The data set WORK.HIGHUTILITY3 has 11 observations and 1
variables.

NOTE: Copying TEMP3.LOWCOMM3 to WORK.LOWCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWCOMM3.

NOTE: The data set WORK.LOWCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWCRUISE3 to WORK.LOWCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWCRUISE3.

NOTE: The data set WORK.LOWCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFBARGE3 to WORK.LOWFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFBARGE3.

NOTE: The data set WORK.LOWFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFSHIPS3 to WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFSHIPS3.

NOTE: The data set WORK.LOWFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWPASS3 to WORK.LOWPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWPASS3.

NOTE: The data set WORK.LOWPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWREC3 to WORK.LOWREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWREC3.

NOTE: The data set WORK.LOWREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.LOWTBARGE3 to WORK.LOWTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTBARGE3.

NOTE: The data set WORK.LOWTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWTSHIPS3 to WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTSHIPS3.

NOTE: The data set WORK.LOWTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWUTILITY3 to WORK.LOWUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWUTILITY3.

NOTE: The data set WORK.LOWUTILITY3 has 11 observations and 1 variables.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting TEMP.LOWOUTDATA_IP (memtype=DATA).

NOTE: Deleting TEMP.LOW_IP (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.N (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: The file WORK.D1 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

463                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A1 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D1.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 11 observations read from the data set WORK.A1.

NOTE: The data set WORK.D1 has 11 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A2 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

464                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A2 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A2.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 22 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A3 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A3.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 33 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

465                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A4 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A4.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 44 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A5 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A5 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A5.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 55 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

466                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A6 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A6.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 66 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

467                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A7 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A7.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 77 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A8 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A8 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A8.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 88 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

468                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A9 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A9.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 99 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A10 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

469                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A10 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A10.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 110 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A11 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A11.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 121 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D1A (memtype=DATA) was not found, but appears on a
DELETE statement.

470                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A1 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D1A.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 121 observations read from the data set WORK.A1.

NOTE: The data set WORK.D1A has 121 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A2 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

471                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A2.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 242 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A3 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A3 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A3.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 363 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

472                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A4 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A4.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 484 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A5 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A5.

473                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 605 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A6 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A6.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 726 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

474                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A7 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A7.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 847 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A8 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A8.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 968 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

475                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A9 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A9.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 1089 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A10 has 121 observations and 3 variables.

476                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A10.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 1210 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A11 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A11 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A11.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 1331 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

477                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D2 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A1 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A1 to WORK.D2.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 1331 observations read from the data set WORK.A1.

NOTE: The data set WORK.D2 has 1331 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

478                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A2 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A2.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 2662 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A3 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A3.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 3993 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

479                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A4 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A4.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 5324 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

480                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A5 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A5.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 6655 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A6 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A6.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 7986 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

481                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A7 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A7.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 9317 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A8 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

482                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Appending WORK.A8 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A8.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 10648 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A9 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A9.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 11979 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.04 seconds

      cpu time            0.01 seconds

      

483                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A10 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A10.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 13310 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A11 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A11.

NOTE: 1331 observations added.

484                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.D2 has 14641 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D1A (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D1B (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D7 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set TEMP.LOW_SS has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D6 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

485                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The file WORK.D3 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D9 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D10 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D4 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D8 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D5 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.HIGHCOMM3 (memtype=DATA).

NOTE: Deleting WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHPASS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHREC3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.LOWCOMM3 (memtype=DATA).

NOTE: Deleting WORK.LOWCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWPASS3 (memtype=DATA).

486                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.LOWREC3 (memtype=DATA).

NOTE: Deleting WORK.LOWTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.LARGE2 created, with 14641 rows and 14 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Variable cs_cost is uninitialized.

NOTE: Variable cf_cost is uninitialized.

NOTE: Variable rs_cost is uninitialized.

NOTE: Variable tb_cost is uninitialized.

NOTE: Variable ts_cost is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      14641 at 3623:140   14641 at 3623:164   14641 at 3623:16    14641
at 3623:40    14641 at 3623:64    

NOTE: There were 14641 observations read from the data set WORK.LARGE2.

NOTE: The data set WORK.LARGE3 has 14641 observations and 20 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.LARGE2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.LARGE3A created, with 14641 rows and 31 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Deleting WORK.LARGE3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

487                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 14641 observations read from the data set WORK.LARGE3A.

NOTE: The data set WORK.LARGE3B has 14641 observations and 43 variables.

NOTE: DATA statement used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.LARGE3A (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.LARGE4 created, with 14641 rows and 34 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: There were 14641 observations read from the data set WORK.LARGE4.

NOTE: The data set TEMP4.LARGE4 has 14641 observations and 34 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.LARGE3B (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 14641 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L1 has 14641 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 14641 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L2 has 14641 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

488                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 14641 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L3 has 14641 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 14641 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L4 has 14641 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 14641 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L5 has 14641 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 14641 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L6 has 14641 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.09 seconds

      cpu time            0.01 seconds

      

NOTE: There were 14641 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L7 has 14641 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 14641 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L8 has 14641 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 14641 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L9 has 14641 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

489                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 14641 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L10 has 14641 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 14641 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L11 has 14641 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 14641 observations read from the data set WORK.L1.

NOTE: There were 14641 observations read from the data set WORK.L2.

NOTE: There were 14641 observations read from the data set WORK.L3.

NOTE: There were 14641 observations read from the data set WORK.L4.

NOTE: There were 14641 observations read from the data set WORK.L5.

NOTE: There were 14641 observations read from the data set WORK.L6.

NOTE: There were 14641 observations read from the data set WORK.L7.

NOTE: There were 14641 observations read from the data set WORK.L8.

NOTE: There were 14641 observations read from the data set WORK.L9.

NOTE: There were 14641 observations read from the data set WORK.L10.

NOTE: There were 14641 observations read from the data set WORK.L11.

NOTE: The data set WORK.L has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.L1 (memtype=DATA).

NOTE: Deleting WORK.L2 (memtype=DATA).

NOTE: Deleting WORK.L3 (memtype=DATA).

NOTE: Deleting WORK.L4 (memtype=DATA).

NOTE: Deleting WORK.L5 (memtype=DATA).

NOTE: Deleting WORK.L6 (memtype=DATA).

NOTE: Deleting WORK.L7 (memtype=DATA).

NOTE: Deleting WORK.L8 (memtype=DATA).

NOTE: Deleting WORK.L9 (memtype=DATA).

NOTE: Deleting WORK.L10 (memtype=DATA).

NOTE: Deleting WORK.L11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 161051 observations read from the data set WORK.L.

NOTE: The data set WORK.L has 161051 observations and 2 variables.

490                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE SORT used (Total process time):

      real time           0.06 seconds

      cpu time            0.10 seconds

      

NOTE: The data set TEMP4.LOW_SS has 1 observations and 102 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Deleting WORK.L (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 14641 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.LARGE5 has 14641 observations and 46 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.LARGE4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D1 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D2 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

491                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D3 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D4 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D5 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.03 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D6 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D7 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D8 created, with 1 rows and 3 columns.

492                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.03 seconds

      cpu time            0.04 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D9 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D10 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D11 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.LARGE5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 2 observations read from the data set WORK.D1.

NOTE: There were 2 observations read from the data set WORK.D2.

NOTE: There were 1 observations read from the data set WORK.D3.

NOTE: There were 1 observations read from the data set WORK.D4.

NOTE: There were 1 observations read from the data set WORK.D5.

NOTE: There were 1 observations read from the data set WORK.D6.

NOTE: There were 1 observations read from the data set WORK.D7.

NOTE: There were 1 observations read from the data set WORK.D8.

NOTE: There were 1 observations read from the data set WORK.D9.

NOTE: There were 1 observations read from the data set WORK.D10.

493                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.D11.

NOTE: The data set TEMP.LOWOUTDATA_SS has 3 observations and 13
variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

3624       
/**********************************************************************

3625        *   PRODUCT:   SAS

3626        *   VERSION:   9.2

3627        *   CREATOR:   External File Interface

3628        *   DATE:      21NOV08

3629        *   DESC:      Generated SAS Datastep Code

3630        *   TEMPLATE SOURCE:  (None Specified.)

3631       
***********************************************************************/

3632           data _null_;

3633           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

3634           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

3635           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_SS.csv' delimiter=',' DSD

3635     ! DROPOVER lrecl=32767;

3636           if _n_ = 1 then        /* write column names or labels */

3637            do;

3638              put

3639                 "NAICS"

3640              ','

3641                 "D"

3642              ','

3643                 "percent1"

3644              ','

3645                 "percent2"

3646              ','

3647                 "percent3"

3648              ','

3649                 "percent4"

3650              ','

3651                 "percent5"

3652              ','

3653                 "percent6"

3654              ','

3655                 "percent7"

3656              ','

3657                 "percent8"

3658              ','

3659                 "percent9"

3660              ','

3661                 "percent10"

3662              ','

3663                 "percent11"

3664              ;

3665            end;

3666          set  TEMP.LOWOUTDATA_SS   end=EFIEOD;

3667              format NAICS $16. ;

3668              format D best12. ;

494                                                        The SAS
System                            15:50 Friday, November 21, 2008

3669              format percent1 percent8.2 ;

3670              format percent2 percent8.2 ;

3671              format percent3 percent8.2 ;

3672              format percent4 percent8.2 ;

3673              format percent5 percent8.2 ;

3674              format percent6 percent8.2 ;

3675              format percent7 percent8.2 ;

3676              format percent8 percent8.2 ;

3677              format percent9 percent8.2 ;

3678              format percent10 percent8.2 ;

3679              format percent11 percent8.2 ;

3680            do;

3681              EFIOUT + 1;

3682              put NAICS $ @;

3683              put D @;

3684              put percent1 @;

3685              put percent2 @;

3686              put percent3 @;

3687              put percent4 @;

3688              put percent5 @;

3689              put percent6 @;

3690              put percent7 @;

3691              put percent8 @;

3692              put percent9 @;

3693              put percent10 @;

3694              put percent11 ;

3695              ;

3696            end;

3697           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

3698           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

3699           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_SS.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_SS.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:19:29,

      Create Time=21Nov2008:16:19:29

NOTE: 4 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_SS.csv'.

      The minimum record length was 24.

      The maximum record length was 108.

NOTE: There were 3 observations read from the data set
TEMP.LOWOUTDATA_SS.

NOTE: At least one W.D format was too small for the number to be
printed. The decimal may be shifted by the "BEST" format.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

3 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_SS.csv from TEMP.LOWOUTDATA_SS.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_SS.csv" file was successfully
created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.04 seconds

495                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.04 seconds

      

3700       
/**********************************************************************

3701        *   PRODUCT:   SAS

3702        *   VERSION:   9.2

3703        *   CREATOR:   External File Interface

3704        *   DATE:      21NOV08

3705        *   DESC:      Generated SAS Datastep Code

3706        *   TEMPLATE SOURCE:  (None Specified.)

3707       
***********************************************************************/

3708           data _null_;

3709           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

3710           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

3711           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_SS.csv' delimiter=',' DSD DROPOVER

3711     ! lrecl=32767;

3712           if _n_ = 1 then        /* write column names or labels */

3713            do;

3714              put

3715                 "P_A"

3716              ','

3717                 "P_100"

3718              ','

3719                 "P_0"

3720              ','

3721                 "P_1"

3722              ','

3723                 "P_2"

3724              ','

3725                 "P_3"

3726              ','

3727                 "P_4"

3728              ','

3729                 "P_5"

3730              ','

3731                 "P_6"

3732              ','

3733                 "P_7"

3734              ','

3735                 "P_8"

3736              ','

3737                 "P_9"

3738              ','

3739                 "P_10"

3740              ','

3741                 "P_11"

3742              ','

3743                 "P_12"

3744              ','

3745                 "P_13"

3746              ','

3747                 "P_14"

3748              ','

496                                                        The SAS
System                            15:50 Friday, November 21, 2008

3749                 "P_15"

3750              ','

3751                 "P_16"

3752              ','

3753                 "P_17"

3754              ','

3755                 "P_18"

3756              ','

3757                 "P_19"

3758              ','

3759                 "P_20"

3760              ','

3761                 "P_21"

3762              ','

3763                 "P_22"

3764              ','

3765                 "P_23"

3766              ','

3767                 "P_24"

3768              ','

3769                 "P_25"

3770              ','

3771                 "P_26"

3772              ','

3773                 "P_27"

3774              ','

3775                 "P_28"

3776              ','

3777                 "P_29"

3778              ','

3779                 "P_30"

3780              ','

3781                 "P_31"

3782              ','

3783                 "P_32"

3784              ','

3785                 "P_33"

3786              ','

3787                 "P_34"

3788              ','

3789                 "P_35"

3790              ','

3791                 "P_36"

3792              ','

3793                 "P_37"

3794              ','

3795                 "P_38"

3796              ','

3797                 "P_39"

3798              ','

3799                 "P_40"

3800              ','

3801                 "P_41"

3802              ','

497                                                        The SAS
System                            15:50 Friday, November 21, 2008

3803                 "P_42"

3804              ','

3805                 "P_43"

3806              ','

3807                 "P_44"

3808              ','

3809                 "P_45"

3810              ','

3811                 "P_46"

3812              ','

3813                 "P_47"

3814              ','

3815                 "P_48"

3816              ','

3817                 "P_49"

3818              ','

3819                 "P_50"

3820              ','

3821                 "P_51"

3822              ','

3823                 "P_52"

3824              ','

3825                 "P_53"

3826              ','

3827                 "P_54"

3828              ','

3829                 "P_55"

3830              ','

3831                 "P_56"

3832              ','

3833                 "P_57"

3834              ','

3835                 "P_58"

3836              ','

3837                 "P_59"

3838              ','

3839                 "P_60"

3840              ','

3841                 "P_61"

3842              ','

3843                 "P_62"

3844              ','

3845                 "P_63"

3846              ','

3847                 "P_64"

3848              ','

3849                 "P_65"

3850              ','

3851                 "P_66"

3852              ','

3853                 "P_67"

3854              ','

3855                 "P_68"

3856              ','

498                                                        The SAS
System                            15:50 Friday, November 21, 2008

3857                 "P_69"

3858              ','

3859                 "P_70"

3860              ','

3861                 "P_71"

3862              ','

3863                 "P_72"

3864              ','

3865                 "P_73"

3866              ','

3867                 "P_74"

3868              ','

3869                 "P_75"

3870              ','

3871                 "P_76"

3872              ','

3873                 "P_77"

3874              ','

3875                 "P_78"

3876              ','

3877                 "P_79"

3878              ','

3879                 "P_80"

3880              ','

3881                 "P_81"

3882              ','

3883                 "P_82"

3884              ','

3885                 "P_83"

3886              ','

3887                 "P_84"

3888              ','

3889                 "P_85"

3890              ','

3891                 "P_86"

3892              ','

3893                 "P_87"

3894              ','

3895                 "P_88"

3896              ','

3897                 "P_89"

3898              ','

3899                 "P_90"

3900              ','

3901                 "P_91"

3902              ','

3903                 "P_92"

3904              ','

3905                 "P_93"

3906              ','

3907                 "P_94"

3908              ','

3909                 "P_95"

3910              ','

499                                                        The SAS
System                            15:50 Friday, November 21, 2008

3911                 "P_96"

3912              ','

3913                 "P_97"

3914              ','

3915                 "P_98"

3916              ','

3917                 "P_99"

3918              ;

3919            end;

3920          set  TEMP4.LOW_SS   end=EFIEOD;

3921              format P_A best12. ;

3922              format P_100 best12. ;

3923              format P_0 best12. ;

3924              format P_1 best12. ;

3925              format P_2 best12. ;

3926              format P_3 best12. ;

3927              format P_4 best12. ;

3928              format P_5 best12. ;

3929              format P_6 best12. ;

3930              format P_7 best12. ;

3931              format P_8 best12. ;

3932              format P_9 best12. ;

3933              format P_10 best12. ;

3934              format P_11 best12. ;

3935              format P_12 best12. ;

3936              format P_13 best12. ;

3937              format P_14 best12. ;

3938              format P_15 best12. ;

3939              format P_16 best12. ;

3940              format P_17 best12. ;

3941              format P_18 best12. ;

3942              format P_19 best12. ;

3943              format P_20 best12. ;

3944              format P_21 best12. ;

3945              format P_22 best12. ;

3946              format P_23 best12. ;

3947              format P_24 best12. ;

3948              format P_25 best12. ;

3949              format P_26 best12. ;

3950              format P_27 best12. ;

3951              format P_28 best12. ;

3952              format P_29 best12. ;

3953              format P_30 best12. ;

3954              format P_31 best12. ;

3955              format P_32 best12. ;

3956              format P_33 best12. ;

3957              format P_34 best12. ;

3958              format P_35 best12. ;

3959              format P_36 best12. ;

3960              format P_37 best12. ;

3961              format P_38 best12. ;

3962              format P_39 best12. ;

3963              format P_40 best12. ;

3964              format P_41 best12. ;

500                                                        The SAS
System                            15:50 Friday, November 21, 2008

3965              format P_42 best12. ;

3966              format P_43 best12. ;

3967              format P_44 best12. ;

3968              format P_45 best12. ;

3969              format P_46 best12. ;

3970              format P_47 best12. ;

3971              format P_48 best12. ;

3972              format P_49 best12. ;

3973              format P_50 best12. ;

3974              format P_51 best12. ;

3975              format P_52 best12. ;

3976              format P_53 best12. ;

3977              format P_54 best12. ;

3978              format P_55 best12. ;

3979              format P_56 best12. ;

3980              format P_57 best12. ;

3981              format P_58 best12. ;

3982              format P_59 best12. ;

3983              format P_60 best12. ;

3984              format P_61 best12. ;

3985              format P_62 best12. ;

3986              format P_63 best12. ;

3987              format P_64 best12. ;

3988              format P_65 best12. ;

3989              format P_66 best12. ;

3990              format P_67 best12. ;

3991              format P_68 best12. ;

3992              format P_69 best12. ;

3993              format P_70 best12. ;

3994              format P_71 best12. ;

3995              format P_72 best12. ;

3996              format P_73 best12. ;

3997              format P_74 best12. ;

3998              format P_75 best12. ;

3999              format P_76 best12. ;

4000              format P_77 best12. ;

4001              format P_78 best12. ;

4002              format P_79 best12. ;

4003              format P_80 best12. ;

4004              format P_81 best12. ;

4005              format P_82 best12. ;

4006              format P_83 best12. ;

4007              format P_84 best12. ;

4008              format P_85 best12. ;

4009              format P_86 best12. ;

4010              format P_87 best12. ;

4011              format P_88 best12. ;

4012              format P_89 best12. ;

4013              format P_90 best12. ;

4014              format P_91 best12. ;

4015              format P_92 best12. ;

4016              format P_93 best12. ;

4017              format P_94 best12. ;

4018              format P_95 best12. ;

501                                                        The SAS
System                            15:50 Friday, November 21, 2008

4019              format P_96 best12. ;

4020              format P_97 best12. ;

4021              format P_98 best12. ;

4022              format P_99 best12. ;

4023            do;

4024              EFIOUT + 1;

4025              put P_A @;

4026              put P_100 @;

4027              put P_0 @;

4028              put P_1 @;

4029              put P_2 @;

4030              put P_3 @;

4031              put P_4 @;

4032              put P_5 @;

4033              put P_6 @;

4034              put P_7 @;

4035              put P_8 @;

4036              put P_9 @;

4037              put P_10 @;

4038              put P_11 @;

4039              put P_12 @;

4040              put P_13 @;

4041              put P_14 @;

4042              put P_15 @;

4043              put P_16 @;

4044              put P_17 @;

4045              put P_18 @;

4046              put P_19 @;

4047              put P_20 @;

4048              put P_21 @;

4049              put P_22 @;

4050              put P_23 @;

4051              put P_24 @;

4052              put P_25 @;

4053              put P_26 @;

4054              put P_27 @;

4055              put P_28 @;

4056              put P_29 @;

4057              put P_30 @;

4058              put P_31 @;

4059              put P_32 @;

4060              put P_33 @;

4061              put P_34 @;

4062              put P_35 @;

4063              put P_36 @;

4064              put P_37 @;

4065              put P_38 @;

4066              put P_39 @;

4067              put P_40 @;

4068              put P_41 @;

4069              put P_42 @;

4070              put P_43 @;

4071              put P_44 @;

4072              put P_45 @;

502                                                        The SAS
System                            15:50 Friday, November 21, 2008

4073              put P_46 @;

4074              put P_47 @;

4075              put P_48 @;

4076              put P_49 @;

4077              put P_50 @;

4078              put P_51 @;

4079              put P_52 @;

4080              put P_53 @;

4081              put P_54 @;

4082              put P_55 @;

4083              put P_56 @;

4084              put P_57 @;

4085              put P_58 @;

4086              put P_59 @;

4087              put P_60 @;

4088              put P_61 @;

4089              put P_62 @;

4090              put P_63 @;

4091              put P_64 @;

4092              put P_65 @;

4093              put P_66 @;

4094              put P_67 @;

4095              put P_68 @;

4096              put P_69 @;

4097              put P_70 @;

4098              put P_71 @;

4099              put P_72 @;

4100              put P_73 @;

4101              put P_74 @;

4102              put P_75 @;

4103              put P_76 @;

4104              put P_77 @;

4105              put P_78 @;

4106              put P_79 @;

4107              put P_80 @;

4108              put P_81 @;

4109              put P_82 @;

4110              put P_83 @;

4111              put P_84 @;

4112              put P_85 @;

4113              put P_86 @;

4114              put P_87 @;

4115              put P_88 @;

4116              put P_89 @;

4117              put P_90 @;

4118              put P_91 @;

4119              put P_92 @;

4120              put P_93 @;

4121              put P_94 @;

4122              put P_95 @;

4123              put P_96 @;

4124              put P_97 @;

4125              put P_98 @;

4126              put P_99 ;

503                                                        The SAS
System                            15:50 Friday, November 21, 2008

4127              ;

4128            end;

4129           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

4130           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

4131           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_SS.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_SS.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:19:29,

      Create Time=21Nov2008:16:19:29

NOTE: 2 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_SS.csv'.

      The minimum record length was 499.

      The maximum record length was 1303.

NOTE: There were 1 observations read from the data set TEMP4.LOW_SS.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

1 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_SS.csv from TEMP4.LOW_SS.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_SS.csv" file was successfully created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: Deleting WORK.D10 (memtype=DATA).

NOTE: Deleting WORK.D11 (memtype=DATA).

NOTE: Deleting WORK.D2 (memtype=DATA).

NOTE: Deleting WORK.D3 (memtype=DATA).

NOTE: Deleting WORK.D4 (memtype=DATA).

NOTE: Deleting WORK.D5 (memtype=DATA).

NOTE: Deleting WORK.D6 (memtype=DATA).

NOTE: Deleting WORK.D7 (memtype=DATA).

NOTE: Deleting WORK.D8 (memtype=DATA).

NOTE: Deleting WORK.D9 (memtype=DATA).

NOTE: Deleting WORK.X (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Copying TEMP3.HIGHCOMM3 to WORK.HIGHCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHCOMM3.

NOTE: The data set WORK.HIGHCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHCRUISE3 to WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHCRUISE3.

504                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.HIGHCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFBARGE3 to WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFBARGE3.

NOTE: The data set WORK.HIGHFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFSHIPS3 to WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFSHIPS3.

NOTE: The data set WORK.HIGHFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHPASS3 to WORK.HIGHPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHPASS3.

NOTE: The data set WORK.HIGHPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHREC3 to WORK.HIGHREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHREC3.

NOTE: The data set WORK.HIGHREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.HIGHTBARGE3 to WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTBARGE3.

NOTE: The data set WORK.HIGHTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHTSHIPS3 to WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTSHIPS3.

NOTE: The data set WORK.HIGHTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHUTILITY3 to WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHUTILITY3.

NOTE: The data set WORK.HIGHUTILITY3 has 11 observations and 1
variables.

NOTE: Copying TEMP3.LOWCOMM3 to WORK.LOWCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWCOMM3.

NOTE: The data set WORK.LOWCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWCRUISE3 to WORK.LOWCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWCRUISE3.

NOTE: The data set WORK.LOWCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFBARGE3 to WORK.LOWFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFBARGE3.

NOTE: The data set WORK.LOWFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFSHIPS3 to WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFSHIPS3.

NOTE: The data set WORK.LOWFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWPASS3 to WORK.LOWPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWPASS3.

NOTE: The data set WORK.LOWPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWREC3 to WORK.LOWREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWREC3.

NOTE: The data set WORK.LOWREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.LOWTBARGE3 to WORK.LOWTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTBARGE3.

NOTE: The data set WORK.LOWTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWTSHIPS3 to WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTSHIPS3.

NOTE: The data set WORK.LOWTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWUTILITY3 to WORK.LOWUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWUTILITY3.

NOTE: The data set WORK.LOWUTILITY3 has 11 observations and 1 variables.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

505                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting TEMP.LOWOUTDATA_SS (memtype=DATA).

NOTE: Deleting TEMP.LOW_SS (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table TEMP.LOW_PH created, with 11 rows and 2 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D1 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D1A (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D1B (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D7 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D2 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D6 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

506                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: The file WORK.D3 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D9 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D10 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D4 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D8 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D5 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.HIGHCOMM3 (memtype=DATA).

NOTE: Deleting WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHPASS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHREC3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.LOWCOMM3 (memtype=DATA).

NOTE: Deleting WORK.LOWCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFBARGE3 (memtype=DATA).

507                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWPASS3 (memtype=DATA).

NOTE: Deleting WORK.LOWREC3 (memtype=DATA).

NOTE: Deleting WORK.LOWTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWUTILITY3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.LARGE2 created, with 11 rows and 11 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Variable cs_cost is uninitialized.

NOTE: Variable cf_cost is uninitialized.

NOTE: Variable fb_cost is uninitialized.

NOTE: Variable fs_cost is uninitialized.

NOTE: Variable pv_cost is uninitialized.

NOTE: Variable rs_cost is uninitialized.

NOTE: Variable tb_cost is uninitialized.

NOTE: Variable ts_cost is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      11 at 4131:140   11 at 4131:164   11 at 4131:188   11 at 4131:212 
 11 at 4131:236   11 at 4131:16    11 at 4131:40

      11 at 4131:64    

NOTE: There were 11 observations read from the data set WORK.LARGE2.

NOTE: The data set WORK.LARGE3 has 11 observations and 20 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.LARGE3A created, with 11 rows and 31 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

508                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.LARGE3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE3A.

NOTE: The data set WORK.LARGE3B has 11 observations and 43 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE3A (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.LARGE4 created, with 11 rows and 34 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set TEMP4.LARGE4 has 11 observations and 34 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE3B (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L1 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L2 has 11 observations and 2 variables.

509                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L3 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L4 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L5 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L6 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L7 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L8 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

510                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L9 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L10 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L11 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.L1.

NOTE: There were 11 observations read from the data set WORK.L2.

NOTE: There were 11 observations read from the data set WORK.L3.

NOTE: There were 11 observations read from the data set WORK.L4.

NOTE: There were 11 observations read from the data set WORK.L5.

NOTE: There were 11 observations read from the data set WORK.L6.

NOTE: There were 11 observations read from the data set WORK.L7.

NOTE: There were 11 observations read from the data set WORK.L8.

NOTE: There were 11 observations read from the data set WORK.L9.

NOTE: There were 11 observations read from the data set WORK.L10.

NOTE: There were 11 observations read from the data set WORK.L11.

NOTE: The data set WORK.L has 121 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.L1 (memtype=DATA).

NOTE: Deleting WORK.L2 (memtype=DATA).

NOTE: Deleting WORK.L3 (memtype=DATA).

NOTE: Deleting WORK.L4 (memtype=DATA).

NOTE: Deleting WORK.L5 (memtype=DATA).

NOTE: Deleting WORK.L6 (memtype=DATA).

NOTE: Deleting WORK.L7 (memtype=DATA).

NOTE: Deleting WORK.L8 (memtype=DATA).

NOTE: Deleting WORK.L9 (memtype=DATA).

NOTE: Deleting WORK.L10 (memtype=DATA).

NOTE: Deleting WORK.L11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

511                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 121 observations read from the data set WORK.L.

NOTE: The data set WORK.L has 121 observations and 2 variables.

NOTE: PROCEDURE SORT used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The data set TEMP4.LOW_PH has 1 observations and 102 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.L (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.LARGE5 has 11 observations and 46 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D1 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D2 created, with 2 rows and 3 columns.

512                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D3 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D4 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D5 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D6 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D7 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

513                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D8 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D9 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D10 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D11 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 2 observations read from the data set WORK.D1.

NOTE: There were 2 observations read from the data set WORK.D2.

NOTE: There were 1 observations read from the data set WORK.D3.

NOTE: There were 1 observations read from the data set WORK.D4.

NOTE: There were 1 observations read from the data set WORK.D5.

514                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.D6.

NOTE: There were 1 observations read from the data set WORK.D7.

NOTE: There were 1 observations read from the data set WORK.D8.

NOTE: There were 1 observations read from the data set WORK.D9.

NOTE: There were 1 observations read from the data set WORK.D10.

NOTE: There were 1 observations read from the data set WORK.D11.

NOTE: The data set TEMP.LOWOUTDATA_PH has 3 observations and 13
variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

4132       
/**********************************************************************

4133        *   PRODUCT:   SAS

4134        *   VERSION:   9.2

4135        *   CREATOR:   External File Interface

4136        *   DATE:      21NOV08

4137        *   DESC:      Generated SAS Datastep Code

4138        *   TEMPLATE SOURCE:  (None Specified.)

4139       
***********************************************************************/

4140           data _null_;

4141           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

4142           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

4143           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_PH.csv' delimiter=',' DSD

4143     ! DROPOVER lrecl=32767;

4144           if _n_ = 1 then        /* write column names or labels */

4145            do;

4146              put

4147                 "NAICS"

4148              ','

4149                 "D"

4150              ','

4151                 "percent1"

4152              ','

4153                 "percent2"

4154              ','

4155                 "percent3"

4156              ','

4157                 "percent4"

4158              ','

4159                 "percent5"

4160              ','

4161                 "percent6"

4162              ','

4163                 "percent7"

4164              ','

4165                 "percent8"

4166              ','

4167                 "percent9"

4168              ','

4169                 "percent10"

4170              ','

4171                 "percent11"

515                                                        The SAS
System                            15:50 Friday, November 21, 2008

4172              ;

4173            end;

4174          set  TEMP.LOWOUTDATA_PH   end=EFIEOD;

4175              format NAICS $16. ;

4176              format D best12. ;

4177              format percent1 percent8.2 ;

4178              format percent2 percent8.2 ;

4179              format percent3 percent8.2 ;

4180              format percent4 percent8.2 ;

4181              format percent5 percent8.2 ;

4182              format percent6 percent8.2 ;

4183              format percent7 percent8.2 ;

4184              format percent8 percent8.2 ;

4185              format percent9 percent8.2 ;

4186              format percent10 percent8.2 ;

4187              format percent11 percent8.2 ;

4188            do;

4189              EFIOUT + 1;

4190              put NAICS $ @;

4191              put D @;

4192              put percent1 @;

4193              put percent2 @;

4194              put percent3 @;

4195              put percent4 @;

4196              put percent5 @;

4197              put percent6 @;

4198              put percent7 @;

4199              put percent8 @;

4200              put percent9 @;

4201              put percent10 @;

4202              put percent11 ;

4203              ;

4204            end;

4205           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

4206           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

4207           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_PH.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_PH.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:19:30,

      Create Time=21Nov2008:16:19:30

NOTE: 4 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_PH.csv'.

      The minimum record length was 24.

      The maximum record length was 108.

NOTE: There were 3 observations read from the data set
TEMP.LOWOUTDATA_PH.

NOTE: At least one W.D format was too small for the number to be
printed. The decimal may be shifted by the "BEST" format.

NOTE: DATA statement used (Total process time):

      real time           0.03 seconds

      cpu time            0.00 seconds

      

3 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_PH.csv from TEMP.LOWOUTDATA_PH.

516                                                        The SAS
System                            15:50 Friday, November 21, 2008

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_PH.csv" file was successfully
created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.07 seconds

      cpu time            0.04 seconds

      

4208       
/**********************************************************************

4209        *   PRODUCT:   SAS

4210        *   VERSION:   9.2

4211        *   CREATOR:   External File Interface

4212        *   DATE:      21NOV08

4213        *   DESC:      Generated SAS Datastep Code

4214        *   TEMPLATE SOURCE:  (None Specified.)

4215       
***********************************************************************/

4216           data _null_;

4217           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

4218           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

4219           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_PH.csv' delimiter=',' DSD DROPOVER

4219     ! lrecl=32767;

4220           if _n_ = 1 then        /* write column names or labels */

4221            do;

4222              put

4223                 "P_A"

4224              ','

4225                 "P_100"

4226              ','

4227                 "P_0"

4228              ','

4229                 "P_1"

4230              ','

4231                 "P_2"

4232              ','

4233                 "P_3"

4234              ','

4235                 "P_4"

4236              ','

4237                 "P_5"

4238              ','

4239                 "P_6"

4240              ','

4241                 "P_7"

4242              ','

4243                 "P_8"

4244              ','

4245                 "P_9"

4246              ','

4247                 "P_10"

4248              ','

4249                 "P_11"

4250              ','

4251                 "P_12"

517                                                        The SAS
System                            15:50 Friday, November 21, 2008

4252              ','

4253                 "P_13"

4254              ','

4255                 "P_14"

4256              ','

4257                 "P_15"

4258              ','

4259                 "P_16"

4260              ','

4261                 "P_17"

4262              ','

4263                 "P_18"

4264              ','

4265                 "P_19"

4266              ','

4267                 "P_20"

4268              ','

4269                 "P_21"

4270              ','

4271                 "P_22"

4272              ','

4273                 "P_23"

4274              ','

4275                 "P_24"

4276              ','

4277                 "P_25"

4278              ','

4279                 "P_26"

4280              ','

4281                 "P_27"

4282              ','

4283                 "P_28"

4284              ','

4285                 "P_29"

4286              ','

4287                 "P_30"

4288              ','

4289                 "P_31"

4290              ','

4291                 "P_32"

4292              ','

4293                 "P_33"

4294              ','

4295                 "P_34"

4296              ','

4297                 "P_35"

4298              ','

4299                 "P_36"

4300              ','

4301                 "P_37"

4302              ','

4303                 "P_38"

4304              ','

4305                 "P_39"

518                                                        The SAS
System                            15:50 Friday, November 21, 2008

4306              ','

4307                 "P_40"

4308              ','

4309                 "P_41"

4310              ','

4311                 "P_42"

4312              ','

4313                 "P_43"

4314              ','

4315                 "P_44"

4316              ','

4317                 "P_45"

4318              ','

4319                 "P_46"

4320              ','

4321                 "P_47"

4322              ','

4323                 "P_48"

4324              ','

4325                 "P_49"

4326              ','

4327                 "P_50"

4328              ','

4329                 "P_51"

4330              ','

4331                 "P_52"

4332              ','

4333                 "P_53"

4334              ','

4335                 "P_54"

4336              ','

4337                 "P_55"

4338              ','

4339                 "P_56"

4340              ','

4341                 "P_57"

4342              ','

4343                 "P_58"

4344              ','

4345                 "P_59"

4346              ','

4347                 "P_60"

4348              ','

4349                 "P_61"

4350              ','

4351                 "P_62"

4352              ','

4353                 "P_63"

4354              ','

4355                 "P_64"

4356              ','

4357                 "P_65"

4358              ','

4359                 "P_66"

519                                                        The SAS
System                            15:50 Friday, November 21, 2008

4360              ','

4361                 "P_67"

4362              ','

4363                 "P_68"

4364              ','

4365                 "P_69"

4366              ','

4367                 "P_70"

4368              ','

4369                 "P_71"

4370              ','

4371                 "P_72"

4372              ','

4373                 "P_73"

4374              ','

4375                 "P_74"

4376              ','

4377                 "P_75"

4378              ','

4379                 "P_76"

4380              ','

4381                 "P_77"

4382              ','

4383                 "P_78"

4384              ','

4385                 "P_79"

4386              ','

4387                 "P_80"

4388              ','

4389                 "P_81"

4390              ','

4391                 "P_82"

4392              ','

4393                 "P_83"

4394              ','

4395                 "P_84"

4396              ','

4397                 "P_85"

4398              ','

4399                 "P_86"

4400              ','

4401                 "P_87"

4402              ','

4403                 "P_88"

4404              ','

4405                 "P_89"

4406              ','

4407                 "P_90"

4408              ','

4409                 "P_91"

4410              ','

4411                 "P_92"

4412              ','

4413                 "P_93"

520                                                        The SAS
System                            15:50 Friday, November 21, 2008

4414              ','

4415                 "P_94"

4416              ','

4417                 "P_95"

4418              ','

4419                 "P_96"

4420              ','

4421                 "P_97"

4422              ','

4423                 "P_98"

4424              ','

4425                 "P_99"

4426              ;

4427            end;

4428          set  TEMP4.LOW_PH   end=EFIEOD;

4429              format P_A best12. ;

4430              format P_100 best12. ;

4431              format P_0 best12. ;

4432              format P_1 best12. ;

4433              format P_2 best12. ;

4434              format P_3 best12. ;

4435              format P_4 best12. ;

4436              format P_5 best12. ;

4437              format P_6 best12. ;

4438              format P_7 best12. ;

4439              format P_8 best12. ;

4440              format P_9 best12. ;

4441              format P_10 best12. ;

4442              format P_11 best12. ;

4443              format P_12 best12. ;

4444              format P_13 best12. ;

4445              format P_14 best12. ;

4446              format P_15 best12. ;

4447              format P_16 best12. ;

4448              format P_17 best12. ;

4449              format P_18 best12. ;

4450              format P_19 best12. ;

4451              format P_20 best12. ;

4452              format P_21 best12. ;

4453              format P_22 best12. ;

4454              format P_23 best12. ;

4455              format P_24 best12. ;

4456              format P_25 best12. ;

4457              format P_26 best12. ;

4458              format P_27 best12. ;

4459              format P_28 best12. ;

4460              format P_29 best12. ;

4461              format P_30 best12. ;

4462              format P_31 best12. ;

4463              format P_32 best12. ;

4464              format P_33 best12. ;

4465              format P_34 best12. ;

4466              format P_35 best12. ;

4467              format P_36 best12. ;

521                                                        The SAS
System                            15:50 Friday, November 21, 2008

4468              format P_37 best12. ;

4469              format P_38 best12. ;

4470              format P_39 best12. ;

4471              format P_40 best12. ;

4472              format P_41 best12. ;

4473              format P_42 best12. ;

4474              format P_43 best12. ;

4475              format P_44 best12. ;

4476              format P_45 best12. ;

4477              format P_46 best12. ;

4478              format P_47 best12. ;

4479              format P_48 best12. ;

4480              format P_49 best12. ;

4481              format P_50 best12. ;

4482              format P_51 best12. ;

4483              format P_52 best12. ;

4484              format P_53 best12. ;

4485              format P_54 best12. ;

4486              format P_55 best12. ;

4487              format P_56 best12. ;

4488              format P_57 best12. ;

4489              format P_58 best12. ;

4490              format P_59 best12. ;

4491              format P_60 best12. ;

4492              format P_61 best12. ;

4493              format P_62 best12. ;

4494              format P_63 best12. ;

4495              format P_64 best12. ;

4496              format P_65 best12. ;

4497              format P_66 best12. ;

4498              format P_67 best12. ;

4499              format P_68 best12. ;

4500              format P_69 best12. ;

4501              format P_70 best12. ;

4502              format P_71 best12. ;

4503              format P_72 best12. ;

4504              format P_73 best12. ;

4505              format P_74 best12. ;

4506              format P_75 best12. ;

4507              format P_76 best12. ;

4508              format P_77 best12. ;

4509              format P_78 best12. ;

4510              format P_79 best12. ;

4511              format P_80 best12. ;

4512              format P_81 best12. ;

4513              format P_82 best12. ;

4514              format P_83 best12. ;

4515              format P_84 best12. ;

4516              format P_85 best12. ;

4517              format P_86 best12. ;

4518              format P_87 best12. ;

4519              format P_88 best12. ;

4520              format P_89 best12. ;

4521              format P_90 best12. ;

522                                                        The SAS
System                            15:50 Friday, November 21, 2008

4522              format P_91 best12. ;

4523              format P_92 best12. ;

4524              format P_93 best12. ;

4525              format P_94 best12. ;

4526              format P_95 best12. ;

4527              format P_96 best12. ;

4528              format P_97 best12. ;

4529              format P_98 best12. ;

4530              format P_99 best12. ;

4531            do;

4532              EFIOUT + 1;

4533              put P_A @;

4534              put P_100 @;

4535              put P_0 @;

4536              put P_1 @;

4537              put P_2 @;

4538              put P_3 @;

4539              put P_4 @;

4540              put P_5 @;

4541              put P_6 @;

4542              put P_7 @;

4543              put P_8 @;

4544              put P_9 @;

4545              put P_10 @;

4546              put P_11 @;

4547              put P_12 @;

4548              put P_13 @;

4549              put P_14 @;

4550              put P_15 @;

4551              put P_16 @;

4552              put P_17 @;

4553              put P_18 @;

4554              put P_19 @;

4555              put P_20 @;

4556              put P_21 @;

4557              put P_22 @;

4558              put P_23 @;

4559              put P_24 @;

4560              put P_25 @;

4561              put P_26 @;

4562              put P_27 @;

4563              put P_28 @;

4564              put P_29 @;

4565              put P_30 @;

4566              put P_31 @;

4567              put P_32 @;

4568              put P_33 @;

4569              put P_34 @;

4570              put P_35 @;

4571              put P_36 @;

4572              put P_37 @;

4573              put P_38 @;

4574              put P_39 @;

4575              put P_40 @;

523                                                        The SAS
System                            15:50 Friday, November 21, 2008

4576              put P_41 @;

4577              put P_42 @;

4578              put P_43 @;

4579              put P_44 @;

4580              put P_45 @;

4581              put P_46 @;

4582              put P_47 @;

4583              put P_48 @;

4584              put P_49 @;

4585              put P_50 @;

4586              put P_51 @;

4587              put P_52 @;

4588              put P_53 @;

4589              put P_54 @;

4590              put P_55 @;

4591              put P_56 @;

4592              put P_57 @;

4593              put P_58 @;

4594              put P_59 @;

4595              put P_60 @;

4596              put P_61 @;

4597              put P_62 @;

4598              put P_63 @;

4599              put P_64 @;

4600              put P_65 @;

4601              put P_66 @;

4602              put P_67 @;

4603              put P_68 @;

4604              put P_69 @;

4605              put P_70 @;

4606              put P_71 @;

4607              put P_72 @;

4608              put P_73 @;

4609              put P_74 @;

4610              put P_75 @;

4611              put P_76 @;

4612              put P_77 @;

4613              put P_78 @;

4614              put P_79 @;

4615              put P_80 @;

4616              put P_81 @;

4617              put P_82 @;

4618              put P_83 @;

4619              put P_84 @;

4620              put P_85 @;

4621              put P_86 @;

4622              put P_87 @;

4623              put P_88 @;

4624              put P_89 @;

4625              put P_90 @;

4626              put P_91 @;

4627              put P_92 @;

4628              put P_93 @;

4629              put P_94 @;

524                                                        The SAS
System                            15:50 Friday, November 21, 2008

4630              put P_95 @;

4631              put P_96 @;

4632              put P_97 @;

4633              put P_98 @;

4634              put P_99 ;

4635              ;

4636            end;

4637           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

4638           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

4639           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_PH.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_PH.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:19:30,

      Create Time=21Nov2008:16:19:30

NOTE: 2 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_PH.csv'.

      The minimum record length was 499.

      The maximum record length was 1323.

NOTE: There were 1 observations read from the data set TEMP4.LOW_PH.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

1 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_PH.csv from TEMP4.LOW_PH.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_PH.csv" file was successfully created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: Deleting WORK.D10 (memtype=DATA).

NOTE: Deleting WORK.D11 (memtype=DATA).

NOTE: Deleting WORK.D2 (memtype=DATA).

NOTE: Deleting WORK.D3 (memtype=DATA).

NOTE: Deleting WORK.D4 (memtype=DATA).

NOTE: Deleting WORK.D5 (memtype=DATA).

NOTE: Deleting WORK.D6 (memtype=DATA).

NOTE: Deleting WORK.D7 (memtype=DATA).

NOTE: Deleting WORK.D8 (memtype=DATA).

NOTE: Deleting WORK.D9 (memtype=DATA).

NOTE: Deleting WORK.X (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

525                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Copying TEMP3.HIGHCOMM3 to WORK.HIGHCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHCOMM3.

NOTE: The data set WORK.HIGHCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHCRUISE3 to WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHCRUISE3.

NOTE: The data set WORK.HIGHCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFBARGE3 to WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFBARGE3.

NOTE: The data set WORK.HIGHFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFSHIPS3 to WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFSHIPS3.

NOTE: The data set WORK.HIGHFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHPASS3 to WORK.HIGHPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHPASS3.

NOTE: The data set WORK.HIGHPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHREC3 to WORK.HIGHREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHREC3.

NOTE: The data set WORK.HIGHREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.HIGHTBARGE3 to WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTBARGE3.

NOTE: The data set WORK.HIGHTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHTSHIPS3 to WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTSHIPS3.

NOTE: The data set WORK.HIGHTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHUTILITY3 to WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHUTILITY3.

NOTE: The data set WORK.HIGHUTILITY3 has 11 observations and 1
variables.

NOTE: Copying TEMP3.LOWCOMM3 to WORK.LOWCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWCOMM3.

NOTE: The data set WORK.LOWCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWCRUISE3 to WORK.LOWCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWCRUISE3.

NOTE: The data set WORK.LOWCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFBARGE3 to WORK.LOWFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFBARGE3.

NOTE: The data set WORK.LOWFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFSHIPS3 to WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFSHIPS3.

NOTE: The data set WORK.LOWFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWPASS3 to WORK.LOWPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWPASS3.

NOTE: The data set WORK.LOWPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWREC3 to WORK.LOWREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWREC3.

NOTE: The data set WORK.LOWREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.LOWTBARGE3 to WORK.LOWTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTBARGE3.

NOTE: The data set WORK.LOWTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWTSHIPS3 to WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTSHIPS3.

NOTE: The data set WORK.LOWTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWUTILITY3 to WORK.LOWUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWUTILITY3.

NOTE: The data set WORK.LOWUTILITY3 has 11 observations and 1 variables.

526                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting TEMP.LOWOUTDATA_PH (memtype=DATA).

NOTE: Deleting TEMP.LOW_PH (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.N (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: The file WORK.D1 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A1 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D1.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 11 observations read from the data set WORK.A1.

NOTE: The data set WORK.D1 has 11 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

527                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A2 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A2.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 22 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A3 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D1.

528                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set WORK.A3.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 33 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A4 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A4.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 44 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

529                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A5 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A5.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 55 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A6 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A6.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 66 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

530                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A7 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A7 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A7.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 77 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

531                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.A8 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A8.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 88 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A9 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A9.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 99 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

532                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A10 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A10 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A10.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 110 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A11 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

533                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A11 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A11.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 121 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D1A (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A1 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D1A.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 121 observations read from the data set WORK.A1.

NOTE: The data set WORK.D1A has 121 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

534                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A2 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A2.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 242 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A3 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

535                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Appending WORK.A3 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A3.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 363 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A4 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A4.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 484 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

536                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A5 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A5.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 605 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A6 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A6.

NOTE: 121 observations added.

537                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.D1A has 726 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A7 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A7.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 847 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

538                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A8 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A8.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 968 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A9 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A9.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 1089 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

539                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A10 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A10.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 1210 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A11 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

540                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A11.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 1331 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D2 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A1 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

541                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A1 to WORK.D2.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 1331 observations read from the data set WORK.A1.

NOTE: The data set WORK.D2 has 1331 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A2 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A2.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 2662 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

542                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A3 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A3.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 3993 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A4 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A4.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 5324 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

543                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A5 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A5.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 6655 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

544                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A6 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A6 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A6.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 7986 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A7 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A7.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 9317 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

545                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A8 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A8.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 10648 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A9 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

546                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A9 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A9.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 11979 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A10 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A10.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 13310 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

547                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A11 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A11.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 14641 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.D1A (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D1B (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D7 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D3 (memtype=DATA) was not found, but appears on a
DELETE statement.

548                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A1 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D3.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 14641 observations read from the data set WORK.A1.

NOTE: The data set WORK.D3 has 14641 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A2 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

549                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A2 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A2.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 29282 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A3 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A3 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A3.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 43923 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

550                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A4 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A4 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A4.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 58564 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A5 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A5 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A5.

551                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 73205 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A6 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A6 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A6.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 87846 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

552                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A7 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A7.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 102487 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A8 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A8.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 117128 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

553                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A9 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A9.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 131769 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A10 has 14641 observations and 5 variables.

554                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A10.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 146410 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A11 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A11 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A11.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 161051 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

555                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Deleting WORK.D2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D6 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D4 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A1 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A1 to WORK.D4.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 161051 observations read from the data set WORK.A1.

NOTE: The data set WORK.D4 has 161051 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

556                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 11 observations read from the data set WORK.LOWCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A2 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A2 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A2.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 322102 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A3 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

557                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A3 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A3.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 483153 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A4 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A4 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A4.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 644204 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

558                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A5 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A5 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A5.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 805255 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A6 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A6 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A6.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 966306 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

559                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A7 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.03 seconds

      

NOTE: Appending WORK.A7 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A7.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 1127357 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

560                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A8 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A8 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A8.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 1288408 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A9 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A9 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A9.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 1449459 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           1.03 seconds

      cpu time            0.04 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

561                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A10 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: Appending WORK.A10 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A10.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 1610510 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           1.43 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A11 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

562                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A11 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A11.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 1771561 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.92 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D9 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D10 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1771561 observations read from the data set WORK.D4.

NOTE: The data set TEMP.LOW_MC has 1771561 observations and 7 variables.

NOTE: DATA statement used (Total process time):

      real time           4.54 seconds

      cpu time            0.67 seconds

      

NOTE: Deleting WORK.D4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D8 (memtype=DATA) was not found, but appears on a
DELETE statement.

563                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D5 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.HIGHCOMM3 (memtype=DATA).

NOTE: Deleting WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHPASS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHREC3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.LOWCOMM3 (memtype=DATA).

NOTE: Deleting WORK.LOWCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWPASS3 (memtype=DATA).

NOTE: Deleting WORK.LOWREC3 (memtype=DATA).

NOTE: Deleting WORK.LOWTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.LARGE2 created, with 1771561 rows and 16 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           7.03 seconds

      cpu time            3.50 seconds

      

NOTE: Variable cs_cost is uninitialized.

NOTE: Variable rs_cost is uninitialized.

NOTE: Variable ts_cost is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1771561 at 4639:140   1771561 at 4639:16    1771561 at 4639:64    

NOTE: There were 1771561 observations read from the data set
WORK.LARGE2.

NOTE: The data set WORK.LARGE3 has 1771561 observations and 20
variables.

NOTE: DATA statement used (Total process time):

564                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           4.95 seconds

      cpu time            1.68 seconds

      

NOTE: Deleting WORK.LARGE2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           3.14 seconds

      cpu time            0.03 seconds

      

NOTE: Table WORK.LARGE3A created, with 1771561 rows and 31 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           10.98 seconds

      cpu time            5.89 seconds

      

NOTE: Deleting WORK.LARGE3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           3.28 seconds

      cpu time            0.03 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE3A.

NOTE: The data set WORK.LARGE3B has 1771561 observations and 43
variables.

NOTE: DATA statement used (Total process time):

      real time           5.60 seconds

      cpu time            2.23 seconds

      

NOTE: Deleting WORK.LARGE3A (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           3.21 seconds

      cpu time            0.03 seconds

      

NOTE: Table WORK.LARGE4 created, with 1771561 rows and 34 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           10.84 seconds

      cpu time            4.90 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set TEMP4.LARGE4 has 1771561 observations and 34
variables.

NOTE: DATA statement used (Total process time):

      real time           4.90 seconds

      cpu time            1.56 seconds

      

565                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.LARGE3B (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           3.50 seconds

      cpu time            0.07 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L1 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           2.28 seconds

      cpu time            0.72 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L2 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           2.92 seconds

      cpu time            0.63 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L3 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           2.71 seconds

      cpu time            0.62 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L4 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           2.63 seconds

      cpu time            0.67 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L5 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           1.87 seconds

      cpu time            0.62 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L6 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           2.71 seconds

      cpu time            0.64 seconds

566                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L7 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           1.21 seconds

      cpu time            0.64 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L8 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           2.60 seconds

      cpu time            0.64 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L9 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           1.43 seconds

      cpu time            0.62 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L10 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           2.70 seconds

      cpu time            0.64 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L11 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.92 seconds

      cpu time            0.71 seconds

      

NOTE: There were 1771561 observations read from the data set WORK.L1.

NOTE: There were 1771561 observations read from the data set WORK.L2.

NOTE: There were 1771561 observations read from the data set WORK.L3.

NOTE: There were 1771561 observations read from the data set WORK.L4.

NOTE: There were 1771561 observations read from the data set WORK.L5.

NOTE: There were 1771561 observations read from the data set WORK.L6.

NOTE: There were 1771561 observations read from the data set WORK.L7.

NOTE: There were 1771561 observations read from the data set WORK.L8.

NOTE: There were 1771561 observations read from the data set WORK.L9.

NOTE: There were 1771561 observations read from the data set WORK.L10.

NOTE: There were 1771561 observations read from the data set WORK.L11.

NOTE: The data set WORK.L has 19487171 observations and 2 variables.

567                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           6.46 seconds

      cpu time            3.57 seconds

      

NOTE: Deleting WORK.L1 (memtype=DATA).

NOTE: Deleting WORK.L2 (memtype=DATA).

NOTE: Deleting WORK.L3 (memtype=DATA).

NOTE: Deleting WORK.L4 (memtype=DATA).

NOTE: Deleting WORK.L5 (memtype=DATA).

NOTE: Deleting WORK.L6 (memtype=DATA).

NOTE: Deleting WORK.L7 (memtype=DATA).

NOTE: Deleting WORK.L8 (memtype=DATA).

NOTE: Deleting WORK.L9 (memtype=DATA).

NOTE: Deleting WORK.L10 (memtype=DATA).

NOTE: Deleting WORK.L11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: There were 19487171 observations read from the data set WORK.L.

NOTE: The data set WORK.L has 19487171 observations and 2 variables.

NOTE: PROCEDURE SORT used (Total process time):

      real time           12.93 seconds

      cpu time            17.35 seconds

      

NOTE: The data set TEMP4.LOW_MC has 1 observations and 102 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           8.14 seconds

      cpu time            7.03 seconds

      

NOTE: Deleting WORK.L (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.87 seconds

      cpu time            0.03 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.LARGE5 has 1771561 observations and 46
variables.

NOTE: DATA statement used (Total process time):

      real time           5.76 seconds

      cpu time            3.40 seconds

      

NOTE: Deleting WORK.LARGE4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

568                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Table WORK.X created, with 3 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D1 created, with 3 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           4.14 seconds

      cpu time            1.82 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D2 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           4.81 seconds

      cpu time            1.87 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D3 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           4.51 seconds

      cpu time            1.82 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D4 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           2.45 seconds

      cpu time            1.87 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D5 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           4.40 seconds

      cpu time            1.76 seconds

      

569                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D6 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           2.60 seconds

      cpu time            1.95 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D7 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           3.03 seconds

      cpu time            1.65 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D8 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           4.51 seconds

      cpu time            1.87 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D9 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           2.43 seconds

      cpu time            1.76 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D10 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           1.65 seconds

      cpu time            1.73 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D11 created, with 1 rows and 3 columns.

570                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE SQL used (Total process time):

      real time           1.18 seconds

      cpu time            1.70 seconds

      

NOTE: Deleting WORK.LARGE5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.07 seconds

      cpu time            0.07 seconds

      

NOTE: There were 3 observations read from the data set WORK.D1.

NOTE: There were 2 observations read from the data set WORK.D2.

NOTE: There were 1 observations read from the data set WORK.D3.

NOTE: There were 1 observations read from the data set WORK.D4.

NOTE: There were 1 observations read from the data set WORK.D5.

NOTE: There were 1 observations read from the data set WORK.D6.

NOTE: There were 1 observations read from the data set WORK.D7.

NOTE: There were 2 observations read from the data set WORK.D8.

NOTE: There were 1 observations read from the data set WORK.D9.

NOTE: There were 1 observations read from the data set WORK.D10.

NOTE: There were 1 observations read from the data set WORK.D11.

NOTE: The data set TEMP.LOWOUTDATA_MC has 3 observations and 13
variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

4640       
/**********************************************************************

4641        *   PRODUCT:   SAS

4642        *   VERSION:   9.2

4643        *   CREATOR:   External File Interface

4644        *   DATE:      21NOV08

4645        *   DESC:      Generated SAS Datastep Code

4646        *   TEMPLATE SOURCE:  (None Specified.)

4647       
***********************************************************************/

4648           data _null_;

4649           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

4650           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

4651           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_MC.csv' delimiter=',' DSD

4651     ! DROPOVER lrecl=32767;

4652           if _n_ = 1 then        /* write column names or labels */

4653            do;

4654              put

4655                 "NAICS"

4656              ','

4657                 "D"

4658              ','

4659                 "percent1"

4660              ','

571                                                        The SAS
System                            15:50 Friday, November 21, 2008

4661                 "percent2"

4662              ','

4663                 "percent3"

4664              ','

4665                 "percent4"

4666              ','

4667                 "percent5"

4668              ','

4669                 "percent6"

4670              ','

4671                 "percent7"

4672              ','

4673                 "percent8"

4674              ','

4675                 "percent9"

4676              ','

4677                 "percent10"

4678              ','

4679                 "percent11"

4680              ;

4681            end;

4682          set  TEMP.LOWOUTDATA_MC   end=EFIEOD;

4683              format NAICS $16. ;

4684              format D best12. ;

4685              format percent1 percent8.2 ;

4686              format percent2 percent8.2 ;

4687              format percent3 percent8.2 ;

4688              format percent4 percent8.2 ;

4689              format percent5 percent8.2 ;

4690              format percent6 percent8.2 ;

4691              format percent7 percent8.2 ;

4692              format percent8 percent8.2 ;

4693              format percent9 percent8.2 ;

4694              format percent10 percent8.2 ;

4695              format percent11 percent8.2 ;

4696            do;

4697              EFIOUT + 1;

4698              put NAICS $ @;

4699              put D @;

4700              put percent1 @;

4701              put percent2 @;

4702              put percent3 @;

4703              put percent4 @;

4704              put percent5 @;

4705              put percent6 @;

4706              put percent7 @;

4707              put percent8 @;

4708              put percent9 @;

4709              put percent10 @;

4710              put percent11 ;

4711              ;

4712            end;

4713           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

4714           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

572                                                        The SAS
System                            15:50 Friday, November 21, 2008

4715           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_MC.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_MC.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:22:11,

      Create Time=21Nov2008:16:22:11

NOTE: 4 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_MC.csv'.

      The minimum record length was 24.

      The maximum record length was 108.

NOTE: There were 3 observations read from the data set
TEMP.LOWOUTDATA_MC.

NOTE: At least one W.D format was too small for the number to be
printed. The decimal may be shifted by the "BEST" format.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

3 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_MC.csv from TEMP.LOWOUTDATA_MC.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_MC.csv" file was successfully
created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.04 seconds

      cpu time            0.03 seconds

      

4716       
/**********************************************************************

4717        *   PRODUCT:   SAS

4718        *   VERSION:   9.2

4719        *   CREATOR:   External File Interface

4720        *   DATE:      21NOV08

4721        *   DESC:      Generated SAS Datastep Code

4722        *   TEMPLATE SOURCE:  (None Specified.)

4723       
***********************************************************************/

4724           data _null_;

4725           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

4726           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

4727           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_MC.csv' delimiter=',' DSD DROPOVER

4727     ! lrecl=32767;

4728           if _n_ = 1 then        /* write column names or labels */

4729            do;

4730              put

4731                 "P_A"

4732              ','

4733                 "P_100"

4734              ','

4735                 "P_0"

4736              ','

4737                 "P_1"

4738              ','

4739                 "P_2"

4740              ','

573                                                        The SAS
System                            15:50 Friday, November 21, 2008

4741                 "P_3"

4742              ','

4743                 "P_4"

4744              ','

4745                 "P_5"

4746              ','

4747                 "P_6"

4748              ','

4749                 "P_7"

4750              ','

4751                 "P_8"

4752              ','

4753                 "P_9"

4754              ','

4755                 "P_10"

4756              ','

4757                 "P_11"

4758              ','

4759                 "P_12"

4760              ','

4761                 "P_13"

4762              ','

4763                 "P_14"

4764              ','

4765                 "P_15"

4766              ','

4767                 "P_16"

4768              ','

4769                 "P_17"

4770              ','

4771                 "P_18"

4772              ','

4773                 "P_19"

4774              ','

4775                 "P_20"

4776              ','

4777                 "P_21"

4778              ','

4779                 "P_22"

4780              ','

4781                 "P_23"

4782              ','

4783                 "P_24"

4784              ','

4785                 "P_25"

4786              ','

4787                 "P_26"

4788              ','

4789                 "P_27"

4790              ','

4791                 "P_28"

4792              ','

4793                 "P_29"

4794              ','

574                                                        The SAS
System                            15:50 Friday, November 21, 2008

4795                 "P_30"

4796              ','

4797                 "P_31"

4798              ','

4799                 "P_32"

4800              ','

4801                 "P_33"

4802              ','

4803                 "P_34"

4804              ','

4805                 "P_35"

4806              ','

4807                 "P_36"

4808              ','

4809                 "P_37"

4810              ','

4811                 "P_38"

4812              ','

4813                 "P_39"

4814              ','

4815                 "P_40"

4816              ','

4817                 "P_41"

4818              ','

4819                 "P_42"

4820              ','

4821                 "P_43"

4822              ','

4823                 "P_44"

4824              ','

4825                 "P_45"

4826              ','

4827                 "P_46"

4828              ','

4829                 "P_47"

4830              ','

4831                 "P_48"

4832              ','

4833                 "P_49"

4834              ','

4835                 "P_50"

4836              ','

4837                 "P_51"

4838              ','

4839                 "P_52"

4840              ','

4841                 "P_53"

4842              ','

4843                 "P_54"

4844              ','

4845                 "P_55"

4846              ','

4847                 "P_56"

4848              ','

575                                                        The SAS
System                            15:50 Friday, November 21, 2008

4849                 "P_57"

4850              ','

4851                 "P_58"

4852              ','

4853                 "P_59"

4854              ','

4855                 "P_60"

4856              ','

4857                 "P_61"

4858              ','

4859                 "P_62"

4860              ','

4861                 "P_63"

4862              ','

4863                 "P_64"

4864              ','

4865                 "P_65"

4866              ','

4867                 "P_66"

4868              ','

4869                 "P_67"

4870              ','

4871                 "P_68"

4872              ','

4873                 "P_69"

4874              ','

4875                 "P_70"

4876              ','

4877                 "P_71"

4878              ','

4879                 "P_72"

4880              ','

4881                 "P_73"

4882              ','

4883                 "P_74"

4884              ','

4885                 "P_75"

4886              ','

4887                 "P_76"

4888              ','

4889                 "P_77"

4890              ','

4891                 "P_78"

4892              ','

4893                 "P_79"

4894              ','

4895                 "P_80"

4896              ','

4897                 "P_81"

4898              ','

4899                 "P_82"

4900              ','

4901                 "P_83"

4902              ','

576                                                        The SAS
System                            15:50 Friday, November 21, 2008

4903                 "P_84"

4904              ','

4905                 "P_85"

4906              ','

4907                 "P_86"

4908              ','

4909                 "P_87"

4910              ','

4911                 "P_88"

4912              ','

4913                 "P_89"

4914              ','

4915                 "P_90"

4916              ','

4917                 "P_91"

4918              ','

4919                 "P_92"

4920              ','

4921                 "P_93"

4922              ','

4923                 "P_94"

4924              ','

4925                 "P_95"

4926              ','

4927                 "P_96"

4928              ','

4929                 "P_97"

4930              ','

4931                 "P_98"

4932              ','

4933                 "P_99"

4934              ;

4935            end;

4936          set  TEMP4.LOW_MC   end=EFIEOD;

4937              format P_A best12. ;

4938              format P_100 best12. ;

4939              format P_0 best12. ;

4940              format P_1 best12. ;

4941              format P_2 best12. ;

4942              format P_3 best12. ;

4943              format P_4 best12. ;

4944              format P_5 best12. ;

4945              format P_6 best12. ;

4946              format P_7 best12. ;

4947              format P_8 best12. ;

4948              format P_9 best12. ;

4949              format P_10 best12. ;

4950              format P_11 best12. ;

4951              format P_12 best12. ;

4952              format P_13 best12. ;

4953              format P_14 best12. ;

4954              format P_15 best12. ;

4955              format P_16 best12. ;

4956              format P_17 best12. ;

577                                                        The SAS
System                            15:50 Friday, November 21, 2008

4957              format P_18 best12. ;

4958              format P_19 best12. ;

4959              format P_20 best12. ;

4960              format P_21 best12. ;

4961              format P_22 best12. ;

4962              format P_23 best12. ;

4963              format P_24 best12. ;

4964              format P_25 best12. ;

4965              format P_26 best12. ;

4966              format P_27 best12. ;

4967              format P_28 best12. ;

4968              format P_29 best12. ;

4969              format P_30 best12. ;

4970              format P_31 best12. ;

4971              format P_32 best12. ;

4972              format P_33 best12. ;

4973              format P_34 best12. ;

4974              format P_35 best12. ;

4975              format P_36 best12. ;

4976              format P_37 best12. ;

4977              format P_38 best12. ;

4978              format P_39 best12. ;

4979              format P_40 best12. ;

4980              format P_41 best12. ;

4981              format P_42 best12. ;

4982              format P_43 best12. ;

4983              format P_44 best12. ;

4984              format P_45 best12. ;

4985              format P_46 best12. ;

4986              format P_47 best12. ;

4987              format P_48 best12. ;

4988              format P_49 best12. ;

4989              format P_50 best12. ;

4990              format P_51 best12. ;

4991              format P_52 best12. ;

4992              format P_53 best12. ;

4993              format P_54 best12. ;

4994              format P_55 best12. ;

4995              format P_56 best12. ;

4996              format P_57 best12. ;

4997              format P_58 best12. ;

4998              format P_59 best12. ;

4999              format P_60 best12. ;

5000              format P_61 best12. ;

5001              format P_62 best12. ;

5002              format P_63 best12. ;

5003              format P_64 best12. ;

5004              format P_65 best12. ;

5005              format P_66 best12. ;

5006              format P_67 best12. ;

5007              format P_68 best12. ;

5008              format P_69 best12. ;

5009              format P_70 best12. ;

5010              format P_71 best12. ;

578                                                        The SAS
System                            15:50 Friday, November 21, 2008

5011              format P_72 best12. ;

5012              format P_73 best12. ;

5013              format P_74 best12. ;

5014              format P_75 best12. ;

5015              format P_76 best12. ;

5016              format P_77 best12. ;

5017              format P_78 best12. ;

5018              format P_79 best12. ;

5019              format P_80 best12. ;

5020              format P_81 best12. ;

5021              format P_82 best12. ;

5022              format P_83 best12. ;

5023              format P_84 best12. ;

5024              format P_85 best12. ;

5025              format P_86 best12. ;

5026              format P_87 best12. ;

5027              format P_88 best12. ;

5028              format P_89 best12. ;

5029              format P_90 best12. ;

5030              format P_91 best12. ;

5031              format P_92 best12. ;

5032              format P_93 best12. ;

5033              format P_94 best12. ;

5034              format P_95 best12. ;

5035              format P_96 best12. ;

5036              format P_97 best12. ;

5037              format P_98 best12. ;

5038              format P_99 best12. ;

5039            do;

5040              EFIOUT + 1;

5041              put P_A @;

5042              put P_100 @;

5043              put P_0 @;

5044              put P_1 @;

5045              put P_2 @;

5046              put P_3 @;

5047              put P_4 @;

5048              put P_5 @;

5049              put P_6 @;

5050              put P_7 @;

5051              put P_8 @;

5052              put P_9 @;

5053              put P_10 @;

5054              put P_11 @;

5055              put P_12 @;

5056              put P_13 @;

5057              put P_14 @;

5058              put P_15 @;

5059              put P_16 @;

5060              put P_17 @;

5061              put P_18 @;

5062              put P_19 @;

5063              put P_20 @;

5064              put P_21 @;

579                                                        The SAS
System                            15:50 Friday, November 21, 2008

5065              put P_22 @;

5066              put P_23 @;

5067              put P_24 @;

5068              put P_25 @;

5069              put P_26 @;

5070              put P_27 @;

5071              put P_28 @;

5072              put P_29 @;

5073              put P_30 @;

5074              put P_31 @;

5075              put P_32 @;

5076              put P_33 @;

5077              put P_34 @;

5078              put P_35 @;

5079              put P_36 @;

5080              put P_37 @;

5081              put P_38 @;

5082              put P_39 @;

5083              put P_40 @;

5084              put P_41 @;

5085              put P_42 @;

5086              put P_43 @;

5087              put P_44 @;

5088              put P_45 @;

5089              put P_46 @;

5090              put P_47 @;

5091              put P_48 @;

5092              put P_49 @;

5093              put P_50 @;

5094              put P_51 @;

5095              put P_52 @;

5096              put P_53 @;

5097              put P_54 @;

5098              put P_55 @;

5099              put P_56 @;

5100              put P_57 @;

5101              put P_58 @;

5102              put P_59 @;

5103              put P_60 @;

5104              put P_61 @;

5105              put P_62 @;

5106              put P_63 @;

5107              put P_64 @;

5108              put P_65 @;

5109              put P_66 @;

5110              put P_67 @;

5111              put P_68 @;

5112              put P_69 @;

5113              put P_70 @;

5114              put P_71 @;

5115              put P_72 @;

5116              put P_73 @;

5117              put P_74 @;

5118              put P_75 @;

580                                                        The SAS
System                            15:50 Friday, November 21, 2008

5119              put P_76 @;

5120              put P_77 @;

5121              put P_78 @;

5122              put P_79 @;

5123              put P_80 @;

5124              put P_81 @;

5125              put P_82 @;

5126              put P_83 @;

5127              put P_84 @;

5128              put P_85 @;

5129              put P_86 @;

5130              put P_87 @;

5131              put P_88 @;

5132              put P_89 @;

5133              put P_90 @;

5134              put P_91 @;

5135              put P_92 @;

5136              put P_93 @;

5137              put P_94 @;

5138              put P_95 @;

5139              put P_96 @;

5140              put P_97 @;

5141              put P_98 @;

5142              put P_99 ;

5143              ;

5144            end;

5145           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

5146           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

5147           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_MC.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_MC.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:22:11,

      Create Time=21Nov2008:16:22:11

NOTE: 2 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_MC.csv'.

      The minimum record length was 499.

      The maximum record length was 1313.

NOTE: There were 1 observations read from the data set TEMP4.LOW_MC.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

1 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_MC.csv from TEMP4.LOW_MC.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_MC.csv" file was successfully created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

581                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: Deleting WORK.D10 (memtype=DATA).

NOTE: Deleting WORK.D11 (memtype=DATA).

NOTE: Deleting WORK.D2 (memtype=DATA).

NOTE: Deleting WORK.D3 (memtype=DATA).

NOTE: Deleting WORK.D4 (memtype=DATA).

NOTE: Deleting WORK.D5 (memtype=DATA).

NOTE: Deleting WORK.D6 (memtype=DATA).

NOTE: Deleting WORK.D7 (memtype=DATA).

NOTE: Deleting WORK.D8 (memtype=DATA).

NOTE: Deleting WORK.D9 (memtype=DATA).

NOTE: Deleting WORK.X (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Copying TEMP3.HIGHCOMM3 to WORK.HIGHCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHCOMM3.

NOTE: The data set WORK.HIGHCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHCRUISE3 to WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHCRUISE3.

NOTE: The data set WORK.HIGHCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFBARGE3 to WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFBARGE3.

NOTE: The data set WORK.HIGHFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFSHIPS3 to WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFSHIPS3.

NOTE: The data set WORK.HIGHFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHPASS3 to WORK.HIGHPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHPASS3.

NOTE: The data set WORK.HIGHPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHREC3 to WORK.HIGHREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHREC3.

NOTE: The data set WORK.HIGHREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.HIGHTBARGE3 to WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTBARGE3.

NOTE: The data set WORK.HIGHTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHTSHIPS3 to WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTSHIPS3.

NOTE: The data set WORK.HIGHTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHUTILITY3 to WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHUTILITY3.

NOTE: The data set WORK.HIGHUTILITY3 has 11 observations and 1
variables.

NOTE: Copying TEMP3.LOWCOMM3 to WORK.LOWCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWCOMM3.

NOTE: The data set WORK.LOWCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWCRUISE3 to WORK.LOWCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWCRUISE3.

NOTE: The data set WORK.LOWCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFBARGE3 to WORK.LOWFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFBARGE3.

582                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.LOWFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFSHIPS3 to WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFSHIPS3.

NOTE: The data set WORK.LOWFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWPASS3 to WORK.LOWPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWPASS3.

NOTE: The data set WORK.LOWPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWREC3 to WORK.LOWREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWREC3.

NOTE: The data set WORK.LOWREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.LOWTBARGE3 to WORK.LOWTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTBARGE3.

NOTE: The data set WORK.LOWTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWTSHIPS3 to WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTSHIPS3.

NOTE: The data set WORK.LOWTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWUTILITY3 to WORK.LOWUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWUTILITY3.

NOTE: The data set WORK.LOWUTILITY3 has 11 observations and 1 variables.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting TEMP.LOWOUTDATA_MC (memtype=DATA).

NOTE: Deleting TEMP.LOW_MC (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.N (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: The file WORK.D1 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A1 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

583                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A1 to WORK.D1.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 11 observations read from the data set WORK.A1.

NOTE: The data set WORK.D1 has 11 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A2 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A2.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 22 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

584                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A3 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A3.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 33 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A4 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A4.

585                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 44 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A5 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A5.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 55 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

586                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A6 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A6.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 66 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A7 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A7.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 77 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

587                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A8 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A8.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 88 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A9 has 11 observations and 2 variables.

588                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A9.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 99 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A10 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A10.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 110 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

589                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A11 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A11 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A11.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 121 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D1B (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

590                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A1 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A1 to WORK.D1B.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 121 observations read from the data set WORK.A1.

NOTE: The data set WORK.D1B has 121 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A2 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A2.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 242 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

591                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A3 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A3.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 363 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A4 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

592                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A4 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A4.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 484 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A5 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A5.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 605 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

593                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A6 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A6.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 726 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A7 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A7 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A7.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 847 observations and 3 variables.

594                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A8 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A8.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 968 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

595                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A9 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A9.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 1089 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A10 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A10 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A10.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 1210 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

596                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A11 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A11.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 1331 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D1A (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

597                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The file WORK.D6 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A1 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A1 to WORK.D6.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 1331 observations read from the data set WORK.A1.

NOTE: The data set WORK.D6 has 1331 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A2 has 1331 observations and 3 variables.

598                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A2.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 2662 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A3 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A3.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 3993 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

599                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 11 observations read from the data set WORK.LOWREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A4 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A4.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 5324 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A5 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

600                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A5 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A5.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 6655 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A6 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A6.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 7986 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

601                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A7 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A7.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 9317 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A8 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A8 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A8.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 10648 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

602                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A9 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A9.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 11979 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

603                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A10 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A10.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 13310 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A11 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A11.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 14641 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

604                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D1B (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D7 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D2 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D10 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A1 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D10.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 14641 observations read from the data set WORK.A1.

NOTE: The data set WORK.D10 has 14641 observations and 4 variables.

605                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A2 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D10.

NOTE: There were 14641 observations read from the data set WORK.A2.

NOTE: 14641 observations added.

NOTE: The data set WORK.D10 has 29282 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

606                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A3 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D10.

NOTE: There were 14641 observations read from the data set WORK.A3.

NOTE: 14641 observations added.

NOTE: The data set WORK.D10 has 43923 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A4 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D10.

NOTE: There were 14641 observations read from the data set WORK.A4.

NOTE: 14641 observations added.

NOTE: The data set WORK.D10 has 58564 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

607                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A5 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D10.

NOTE: There were 14641 observations read from the data set WORK.A5.

NOTE: 14641 observations added.

NOTE: The data set WORK.D10 has 73205 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A6 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

608                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D10.

NOTE: There were 14641 observations read from the data set WORK.A6.

NOTE: 14641 observations added.

NOTE: The data set WORK.D10 has 87846 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A7 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D10.

NOTE: There were 14641 observations read from the data set WORK.A7.

NOTE: 14641 observations added.

NOTE: The data set WORK.D10 has 102487 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

609                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A8 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D10.

NOTE: There were 14641 observations read from the data set WORK.A8.

NOTE: 14641 observations added.

NOTE: The data set WORK.D10 has 117128 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A9 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A9 to WORK.D10.

NOTE: There were 14641 observations read from the data set WORK.A9.

610                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: 14641 observations added.

NOTE: The data set WORK.D10 has 131769 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A10 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A10 to WORK.D10.

NOTE: There were 14641 observations read from the data set WORK.A10.

NOTE: 14641 observations added.

NOTE: The data set WORK.D10 has 146410 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

611                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A11 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A11 to WORK.D10.

NOTE: There were 14641 observations read from the data set WORK.A11.

NOTE: 14641 observations added.

NOTE: The data set WORK.D10 has 161051 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D3 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D9 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 161051 observations read from the data set WORK.D10.

NOTE: The data set TEMP.LOW_NS has 161051 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

612                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.D10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D4 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D8 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D5 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.HIGHCOMM3 (memtype=DATA).

NOTE: Deleting WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHPASS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHREC3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.LOWCOMM3 (memtype=DATA).

NOTE: Deleting WORK.LOWCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWPASS3 (memtype=DATA).

NOTE: Deleting WORK.LOWREC3 (memtype=DATA).

NOTE: Deleting WORK.LOWTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.LARGE2 created, with 161051 rows and 14 columns.

613                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.17 seconds

      cpu time            0.23 seconds

      

NOTE: Variable cs_cost is uninitialized.

NOTE: Variable cf_cost is uninitialized.

NOTE: Variable fs_cost is uninitialized.

NOTE: Variable rs_cost is uninitialized.

NOTE: Variable ts_cost is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      161051 at 5147:140   161051 at 5147:164   161051 at 5147:212  
161051 at 5147:16    161051 at 5147:64    

NOTE: There were 161051 observations read from the data set WORK.LARGE2.

NOTE: The data set WORK.LARGE3 has 161051 observations and 20 variables.

NOTE: DATA statement used (Total process time):

      real time           0.87 seconds

      cpu time            0.18 seconds

      

NOTE: Deleting WORK.LARGE2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.LARGE3A created, with 161051 rows and 31 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           3.50 seconds

      cpu time            0.42 seconds

      

NOTE: Deleting WORK.LARGE3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 161051 observations read from the data set
WORK.LARGE3A.

NOTE: The data set WORK.LARGE3B has 161051 observations and 43
variables.

NOTE: DATA statement used (Total process time):

      real time           0.23 seconds

      cpu time            0.21 seconds

      

NOTE: Deleting WORK.LARGE3A (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

614                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.LARGE4 created, with 161051 rows and 34 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.32 seconds

      cpu time            0.37 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set TEMP4.LARGE4 has 161051 observations and 34
variables.

NOTE: DATA statement used (Total process time):

      real time           3.14 seconds

      cpu time            0.17 seconds

      

NOTE: Deleting WORK.LARGE3B (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.48 seconds

      cpu time            0.00 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L1 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L2 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.07 seconds

      cpu time            0.07 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L3 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L4 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

615                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.06 seconds

      cpu time            0.04 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L5 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L6 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.07 seconds

      cpu time            0.07 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L7 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.18 seconds

      cpu time            0.06 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L8 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L9 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L10 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.07 seconds

      cpu time            0.07 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

616                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.L11 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.07 seconds

      cpu time            0.07 seconds

      

NOTE: There were 161051 observations read from the data set WORK.L1.

NOTE: There were 161051 observations read from the data set WORK.L2.

NOTE: There were 161051 observations read from the data set WORK.L3.

NOTE: There were 161051 observations read from the data set WORK.L4.

NOTE: There were 161051 observations read from the data set WORK.L5.

NOTE: There were 161051 observations read from the data set WORK.L6.

NOTE: There were 161051 observations read from the data set WORK.L7.

NOTE: There were 161051 observations read from the data set WORK.L8.

NOTE: There were 161051 observations read from the data set WORK.L9.

NOTE: There were 161051 observations read from the data set WORK.L10.

NOTE: There were 161051 observations read from the data set WORK.L11.

NOTE: The data set WORK.L has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.32 seconds

      cpu time            0.32 seconds

      

NOTE: Deleting WORK.L1 (memtype=DATA).

NOTE: Deleting WORK.L2 (memtype=DATA).

NOTE: Deleting WORK.L3 (memtype=DATA).

NOTE: Deleting WORK.L4 (memtype=DATA).

NOTE: Deleting WORK.L5 (memtype=DATA).

NOTE: Deleting WORK.L6 (memtype=DATA).

NOTE: Deleting WORK.L7 (memtype=DATA).

NOTE: Deleting WORK.L8 (memtype=DATA).

NOTE: Deleting WORK.L9 (memtype=DATA).

NOTE: Deleting WORK.L10 (memtype=DATA).

NOTE: Deleting WORK.L11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1771561 observations read from the data set WORK.L.

NOTE: The data set WORK.L has 1771561 observations and 2 variables.

NOTE: PROCEDURE SORT used (Total process time):

      real time           2.46 seconds

      cpu time            1.50 seconds

      

NOTE: The data set TEMP4.LOW_NS has 1 observations and 102 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           0.62 seconds

      cpu time            0.62 seconds

      

617                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.L (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.LARGE5 has 161051 observations and 46 variables.

NOTE: DATA statement used (Total process time):

      real time           3.07 seconds

      cpu time            0.29 seconds

      

NOTE: Deleting WORK.LARGE4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D1 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.12 seconds

      cpu time            0.17 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D2 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.10 seconds

      cpu time            0.14 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D3 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.12 seconds

      cpu time            0.17 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

618                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D4 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.12 seconds

      cpu time            0.17 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D5 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.14 seconds

      cpu time            0.17 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D6 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.12 seconds

      cpu time            0.15 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D7 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.12 seconds

      cpu time            0.17 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D8 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.10 seconds

      cpu time            0.15 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D9 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

619                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.12 seconds

      cpu time            0.18 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D10 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.12 seconds

      cpu time            0.23 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D11 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.10 seconds

      cpu time            0.14 seconds

      

NOTE: Deleting WORK.LARGE5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 2 observations read from the data set WORK.D1.

NOTE: There were 2 observations read from the data set WORK.D2.

NOTE: There were 1 observations read from the data set WORK.D3.

NOTE: There were 1 observations read from the data set WORK.D4.

NOTE: There were 1 observations read from the data set WORK.D5.

NOTE: There were 1 observations read from the data set WORK.D6.

NOTE: There were 1 observations read from the data set WORK.D7.

NOTE: There were 1 observations read from the data set WORK.D8.

NOTE: There were 1 observations read from the data set WORK.D9.

NOTE: There were 1 observations read from the data set WORK.D10.

NOTE: There were 1 observations read from the data set WORK.D11.

NOTE: The data set TEMP.LOWOUTDATA_NS has 3 observations and 13
variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

5148       
/**********************************************************************

5149        *   PRODUCT:   SAS

5150        *   VERSION:   9.2

5151        *   CREATOR:   External File Interface

620                                                        The SAS
System                            15:50 Friday, November 21, 2008

5152        *   DATE:      21NOV08

5153        *   DESC:      Generated SAS Datastep Code

5154        *   TEMPLATE SOURCE:  (None Specified.)

5155       
***********************************************************************/

5156           data _null_;

5157           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

5158           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

5159           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_NS.csv' delimiter=',' DSD

5159     ! DROPOVER lrecl=32767;

5160           if _n_ = 1 then        /* write column names or labels */

5161            do;

5162              put

5163                 "NAICS"

5164              ','

5165                 "D"

5166              ','

5167                 "percent1"

5168              ','

5169                 "percent2"

5170              ','

5171                 "percent3"

5172              ','

5173                 "percent4"

5174              ','

5175                 "percent5"

5176              ','

5177                 "percent6"

5178              ','

5179                 "percent7"

5180              ','

5181                 "percent8"

5182              ','

5183                 "percent9"

5184              ','

5185                 "percent10"

5186              ','

5187                 "percent11"

5188              ;

5189            end;

5190          set  TEMP.LOWOUTDATA_NS   end=EFIEOD;

5191              format NAICS $16. ;

5192              format D best12. ;

5193              format percent1 percent8.2 ;

5194              format percent2 percent8.2 ;

5195              format percent3 percent8.2 ;

5196              format percent4 percent8.2 ;

5197              format percent5 percent8.2 ;

5198              format percent6 percent8.2 ;

5199              format percent7 percent8.2 ;

5200              format percent8 percent8.2 ;

5201              format percent9 percent8.2 ;

5202              format percent10 percent8.2 ;

5203              format percent11 percent8.2 ;

5204            do;

621                                                        The SAS
System                            15:50 Friday, November 21, 2008

5205              EFIOUT + 1;

5206              put NAICS $ @;

5207              put D @;

5208              put percent1 @;

5209              put percent2 @;

5210              put percent3 @;

5211              put percent4 @;

5212              put percent5 @;

5213              put percent6 @;

5214              put percent7 @;

5215              put percent8 @;

5216              put percent9 @;

5217              put percent10 @;

5218              put percent11 ;

5219              ;

5220            end;

5221           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

5222           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

5223           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_NS.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_NS.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:22:29,

      Create Time=21Nov2008:16:22:29

NOTE: 4 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_NS.csv'.

      The minimum record length was 24.

      The maximum record length was 108.

NOTE: There were 3 observations read from the data set
TEMP.LOWOUTDATA_NS.

NOTE: At least one W.D format was too small for the number to be
printed. The decimal may be shifted by the "BEST" format.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

3 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_NS.csv from TEMP.LOWOUTDATA_NS.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_NS.csv" file was successfully
created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.06 seconds

      cpu time            0.04 seconds

      

5224       
/**********************************************************************

5225        *   PRODUCT:   SAS

5226        *   VERSION:   9.2

5227        *   CREATOR:   External File Interface

5228        *   DATE:      21NOV08

5229        *   DESC:      Generated SAS Datastep Code

5230        *   TEMPLATE SOURCE:  (None Specified.)

5231       
***********************************************************************/

622                                                        The SAS
System                            15:50 Friday, November 21, 2008

5232           data _null_;

5233           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

5234           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

5235           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_NS.csv' delimiter=',' DSD DROPOVER

5235     ! lrecl=32767;

5236           if _n_ = 1 then        /* write column names or labels */

5237            do;

5238              put

5239                 "P_A"

5240              ','

5241                 "P_100"

5242              ','

5243                 "P_0"

5244              ','

5245                 "P_1"

5246              ','

5247                 "P_2"

5248              ','

5249                 "P_3"

5250              ','

5251                 "P_4"

5252              ','

5253                 "P_5"

5254              ','

5255                 "P_6"

5256              ','

5257                 "P_7"

5258              ','

5259                 "P_8"

5260              ','

5261                 "P_9"

5262              ','

5263                 "P_10"

5264              ','

5265                 "P_11"

5266              ','

5267                 "P_12"

5268              ','

5269                 "P_13"

5270              ','

5271                 "P_14"

5272              ','

5273                 "P_15"

5274              ','

5275                 "P_16"

5276              ','

5277                 "P_17"

5278              ','

5279                 "P_18"

5280              ','

5281                 "P_19"

5282              ','

5283                 "P_20"

5284              ','

623                                                        The SAS
System                            15:50 Friday, November 21, 2008

5285                 "P_21"

5286              ','

5287                 "P_22"

5288              ','

5289                 "P_23"

5290              ','

5291                 "P_24"

5292              ','

5293                 "P_25"

5294              ','

5295                 "P_26"

5296              ','

5297                 "P_27"

5298              ','

5299                 "P_28"

5300              ','

5301                 "P_29"

5302              ','

5303                 "P_30"

5304              ','

5305                 "P_31"

5306              ','

5307                 "P_32"

5308              ','

5309                 "P_33"

5310              ','

5311                 "P_34"

5312              ','

5313                 "P_35"

5314              ','

5315                 "P_36"

5316              ','

5317                 "P_37"

5318              ','

5319                 "P_38"

5320              ','

5321                 "P_39"

5322              ','

5323                 "P_40"

5324              ','

5325                 "P_41"

5326              ','

5327                 "P_42"

5328              ','

5329                 "P_43"

5330              ','

5331                 "P_44"

5332              ','

5333                 "P_45"

5334              ','

5335                 "P_46"

5336              ','

5337                 "P_47"

5338              ','

624                                                        The SAS
System                            15:50 Friday, November 21, 2008

5339                 "P_48"

5340              ','

5341                 "P_49"

5342              ','

5343                 "P_50"

5344              ','

5345                 "P_51"

5346              ','

5347                 "P_52"

5348              ','

5349                 "P_53"

5350              ','

5351                 "P_54"

5352              ','

5353                 "P_55"

5354              ','

5355                 "P_56"

5356              ','

5357                 "P_57"

5358              ','

5359                 "P_58"

5360              ','

5361                 "P_59"

5362              ','

5363                 "P_60"

5364              ','

5365                 "P_61"

5366              ','

5367                 "P_62"

5368              ','

5369                 "P_63"

5370              ','

5371                 "P_64"

5372              ','

5373                 "P_65"

5374              ','

5375                 "P_66"

5376              ','

5377                 "P_67"

5378              ','

5379                 "P_68"

5380              ','

5381                 "P_69"

5382              ','

5383                 "P_70"

5384              ','

5385                 "P_71"

5386              ','

5387                 "P_72"

5388              ','

5389                 "P_73"

5390              ','

5391                 "P_74"

5392              ','

625                                                        The SAS
System                            15:50 Friday, November 21, 2008

5393                 "P_75"

5394              ','

5395                 "P_76"

5396              ','

5397                 "P_77"

5398              ','

5399                 "P_78"

5400              ','

5401                 "P_79"

5402              ','

5403                 "P_80"

5404              ','

5405                 "P_81"

5406              ','

5407                 "P_82"

5408              ','

5409                 "P_83"

5410              ','

5411                 "P_84"

5412              ','

5413                 "P_85"

5414              ','

5415                 "P_86"

5416              ','

5417                 "P_87"

5418              ','

5419                 "P_88"

5420              ','

5421                 "P_89"

5422              ','

5423                 "P_90"

5424              ','

5425                 "P_91"

5426              ','

5427                 "P_92"

5428              ','

5429                 "P_93"

5430              ','

5431                 "P_94"

5432              ','

5433                 "P_95"

5434              ','

5435                 "P_96"

5436              ','

5437                 "P_97"

5438              ','

5439                 "P_98"

5440              ','

5441                 "P_99"

5442              ;

5443            end;

5444          set  TEMP4.LOW_NS   end=EFIEOD;

5445              format P_A best12. ;

5446              format P_100 best12. ;

626                                                        The SAS
System                            15:50 Friday, November 21, 2008

5447              format P_0 best12. ;

5448              format P_1 best12. ;

5449              format P_2 best12. ;

5450              format P_3 best12. ;

5451              format P_4 best12. ;

5452              format P_5 best12. ;

5453              format P_6 best12. ;

5454              format P_7 best12. ;

5455              format P_8 best12. ;

5456              format P_9 best12. ;

5457              format P_10 best12. ;

5458              format P_11 best12. ;

5459              format P_12 best12. ;

5460              format P_13 best12. ;

5461              format P_14 best12. ;

5462              format P_15 best12. ;

5463              format P_16 best12. ;

5464              format P_17 best12. ;

5465              format P_18 best12. ;

5466              format P_19 best12. ;

5467              format P_20 best12. ;

5468              format P_21 best12. ;

5469              format P_22 best12. ;

5470              format P_23 best12. ;

5471              format P_24 best12. ;

5472              format P_25 best12. ;

5473              format P_26 best12. ;

5474              format P_27 best12. ;

5475              format P_28 best12. ;

5476              format P_29 best12. ;

5477              format P_30 best12. ;

5478              format P_31 best12. ;

5479              format P_32 best12. ;

5480              format P_33 best12. ;

5481              format P_34 best12. ;

5482              format P_35 best12. ;

5483              format P_36 best12. ;

5484              format P_37 best12. ;

5485              format P_38 best12. ;

5486              format P_39 best12. ;

5487              format P_40 best12. ;

5488              format P_41 best12. ;

5489              format P_42 best12. ;

5490              format P_43 best12. ;

5491              format P_44 best12. ;

5492              format P_45 best12. ;

5493              format P_46 best12. ;

5494              format P_47 best12. ;

5495              format P_48 best12. ;

5496              format P_49 best12. ;

5497              format P_50 best12. ;

5498              format P_51 best12. ;

5499              format P_52 best12. ;

5500              format P_53 best12. ;

627                                                        The SAS
System                            15:50 Friday, November 21, 2008

5501              format P_54 best12. ;

5502              format P_55 best12. ;

5503              format P_56 best12. ;

5504              format P_57 best12. ;

5505              format P_58 best12. ;

5506              format P_59 best12. ;

5507              format P_60 best12. ;

5508              format P_61 best12. ;

5509              format P_62 best12. ;

5510              format P_63 best12. ;

5511              format P_64 best12. ;

5512              format P_65 best12. ;

5513              format P_66 best12. ;

5514              format P_67 best12. ;

5515              format P_68 best12. ;

5516              format P_69 best12. ;

5517              format P_70 best12. ;

5518              format P_71 best12. ;

5519              format P_72 best12. ;

5520              format P_73 best12. ;

5521              format P_74 best12. ;

5522              format P_75 best12. ;

5523              format P_76 best12. ;

5524              format P_77 best12. ;

5525              format P_78 best12. ;

5526              format P_79 best12. ;

5527              format P_80 best12. ;

5528              format P_81 best12. ;

5529              format P_82 best12. ;

5530              format P_83 best12. ;

5531              format P_84 best12. ;

5532              format P_85 best12. ;

5533              format P_86 best12. ;

5534              format P_87 best12. ;

5535              format P_88 best12. ;

5536              format P_89 best12. ;

5537              format P_90 best12. ;

5538              format P_91 best12. ;

5539              format P_92 best12. ;

5540              format P_93 best12. ;

5541              format P_94 best12. ;

5542              format P_95 best12. ;

5543              format P_96 best12. ;

5544              format P_97 best12. ;

5545              format P_98 best12. ;

5546              format P_99 best12. ;

5547            do;

5548              EFIOUT + 1;

5549              put P_A @;

5550              put P_100 @;

5551              put P_0 @;

5552              put P_1 @;

5553              put P_2 @;

5554              put P_3 @;

628                                                        The SAS
System                            15:50 Friday, November 21, 2008

5555              put P_4 @;

5556              put P_5 @;

5557              put P_6 @;

5558              put P_7 @;

5559              put P_8 @;

5560              put P_9 @;

5561              put P_10 @;

5562              put P_11 @;

5563              put P_12 @;

5564              put P_13 @;

5565              put P_14 @;

5566              put P_15 @;

5567              put P_16 @;

5568              put P_17 @;

5569              put P_18 @;

5570              put P_19 @;

5571              put P_20 @;

5572              put P_21 @;

5573              put P_22 @;

5574              put P_23 @;

5575              put P_24 @;

5576              put P_25 @;

5577              put P_26 @;

5578              put P_27 @;

5579              put P_28 @;

5580              put P_29 @;

5581              put P_30 @;

5582              put P_31 @;

5583              put P_32 @;

5584              put P_33 @;

5585              put P_34 @;

5586              put P_35 @;

5587              put P_36 @;

5588              put P_37 @;

5589              put P_38 @;

5590              put P_39 @;

5591              put P_40 @;

5592              put P_41 @;

5593              put P_42 @;

5594              put P_43 @;

5595              put P_44 @;

5596              put P_45 @;

5597              put P_46 @;

5598              put P_47 @;

5599              put P_48 @;

5600              put P_49 @;

5601              put P_50 @;

5602              put P_51 @;

5603              put P_52 @;

5604              put P_53 @;

5605              put P_54 @;

5606              put P_55 @;

5607              put P_56 @;

5608              put P_57 @;

629                                                        The SAS
System                            15:50 Friday, November 21, 2008

5609              put P_58 @;

5610              put P_59 @;

5611              put P_60 @;

5612              put P_61 @;

5613              put P_62 @;

5614              put P_63 @;

5615              put P_64 @;

5616              put P_65 @;

5617              put P_66 @;

5618              put P_67 @;

5619              put P_68 @;

5620              put P_69 @;

5621              put P_70 @;

5622              put P_71 @;

5623              put P_72 @;

5624              put P_73 @;

5625              put P_74 @;

5626              put P_75 @;

5627              put P_76 @;

5628              put P_77 @;

5629              put P_78 @;

5630              put P_79 @;

5631              put P_80 @;

5632              put P_81 @;

5633              put P_82 @;

5634              put P_83 @;

5635              put P_84 @;

5636              put P_85 @;

5637              put P_86 @;

5638              put P_87 @;

5639              put P_88 @;

5640              put P_89 @;

5641              put P_90 @;

5642              put P_91 @;

5643              put P_92 @;

5644              put P_93 @;

5645              put P_94 @;

5646              put P_95 @;

5647              put P_96 @;

5648              put P_97 @;

5649              put P_98 @;

5650              put P_99 ;

5651              ;

5652            end;

5653           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

5654           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

5655           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_NS.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_NS.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:22:29,

      Create Time=21Nov2008:16:22:29

630                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: 2 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_NS.csv'.

      The minimum record length was 499.

      The maximum record length was 1317.

NOTE: There were 1 observations read from the data set TEMP4.LOW_NS.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

1 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_NS.csv from TEMP4.LOW_NS.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_NS.csv" file was successfully created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.06 seconds

      cpu time            0.04 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: Deleting WORK.D10 (memtype=DATA).

NOTE: Deleting WORK.D11 (memtype=DATA).

NOTE: Deleting WORK.D2 (memtype=DATA).

NOTE: Deleting WORK.D3 (memtype=DATA).

NOTE: Deleting WORK.D4 (memtype=DATA).

NOTE: Deleting WORK.D5 (memtype=DATA).

NOTE: Deleting WORK.D6 (memtype=DATA).

NOTE: Deleting WORK.D7 (memtype=DATA).

NOTE: Deleting WORK.D8 (memtype=DATA).

NOTE: Deleting WORK.D9 (memtype=DATA).

NOTE: Deleting WORK.X (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Copying TEMP3.HIGHCOMM3 to WORK.HIGHCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHCOMM3.

NOTE: The data set WORK.HIGHCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHCRUISE3 to WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHCRUISE3.

NOTE: The data set WORK.HIGHCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFBARGE3 to WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFBARGE3.

NOTE: The data set WORK.HIGHFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFSHIPS3 to WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFSHIPS3.

NOTE: The data set WORK.HIGHFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHPASS3 to WORK.HIGHPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHPASS3.

NOTE: The data set WORK.HIGHPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHREC3 to WORK.HIGHREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHREC3.

631                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.HIGHREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.HIGHTBARGE3 to WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTBARGE3.

NOTE: The data set WORK.HIGHTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHTSHIPS3 to WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTSHIPS3.

NOTE: The data set WORK.HIGHTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHUTILITY3 to WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHUTILITY3.

NOTE: The data set WORK.HIGHUTILITY3 has 11 observations and 1
variables.

NOTE: Copying TEMP3.LOWCOMM3 to WORK.LOWCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWCOMM3.

NOTE: The data set WORK.LOWCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWCRUISE3 to WORK.LOWCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWCRUISE3.

NOTE: The data set WORK.LOWCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFBARGE3 to WORK.LOWFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFBARGE3.

NOTE: The data set WORK.LOWFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFSHIPS3 to WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFSHIPS3.

NOTE: The data set WORK.LOWFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWPASS3 to WORK.LOWPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWPASS3.

NOTE: The data set WORK.LOWPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWREC3 to WORK.LOWREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWREC3.

NOTE: The data set WORK.LOWREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.LOWTBARGE3 to WORK.LOWTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTBARGE3.

NOTE: The data set WORK.LOWTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWTSHIPS3 to WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTSHIPS3.

NOTE: The data set WORK.LOWTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWUTILITY3 to WORK.LOWUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWUTILITY3.

NOTE: The data set WORK.LOWUTILITY3 has 11 observations and 1 variables.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.03 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting TEMP.LOWOUTDATA_NS (memtype=DATA).

NOTE: Deleting TEMP.LOW_NS (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.N (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: The file WORK.D1 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

632                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A1 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D1.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 11 observations read from the data set WORK.A1.

NOTE: The data set WORK.D1 has 11 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A2 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

633                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A2 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A2.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 22 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A3 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A3.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 33 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

634                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A4 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A4.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 44 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A5 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A5.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 55 observations and 2 variables.

635                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A6 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A6.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 66 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

636                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A7 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A7.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 77 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A8 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A8.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 88 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

637                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A9 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A9.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 99 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A10 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

638                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A10.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 110 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.LOWUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.LOWPASS3.

NOTE: The data set WORK.A11 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A11.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 121 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

639                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The file WORK.D1B (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A1 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D1B.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 121 observations read from the data set WORK.A1.

NOTE: The data set WORK.D1B has 121 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A2 has 121 observations and 3 variables.

640                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A2 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A2.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 242 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A3 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A3.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 363 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

641                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A4 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A4.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 484 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A5 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

642                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A5 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A5.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 605 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A6 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A6.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 726 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

643                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A7 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A7.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 847 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A8 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A8.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 968 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

644                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A9 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A9.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 1089 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

645                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A10 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A10.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 1210 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A11 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A11.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 1331 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

646                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D1A (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D6 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A1 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D6.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 1331 observations read from the data set WORK.A1.

NOTE: The data set WORK.D6 has 1331 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

647                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A2 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A2.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 2662 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A3 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

648                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A3.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 3993 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A4 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A4.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 5324 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

649                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set WORK.LOWREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A5 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A5.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 6655 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A6 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A6.

650                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 7986 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A7 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A7.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 9317 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

651                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A8 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A8.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 10648 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A9 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A9.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 11979 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

652                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A10 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A10.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 13310 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A11 has 1331 observations and 3 variables.

653                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A11 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A11.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 14641 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D1B (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D7 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D2 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D9 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

654                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A1 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D9.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 14641 observations read from the data set WORK.A1.

NOTE: The data set WORK.D9 has 14641 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A2 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D9.

NOTE: There were 14641 observations read from the data set WORK.A2.

NOTE: 14641 observations added.

NOTE: The data set WORK.D9 has 29282 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

655                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A3 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D9.

NOTE: There were 14641 observations read from the data set WORK.A3.

NOTE: 14641 observations added.

NOTE: The data set WORK.D9 has 43923 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

656                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A4 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A4 to WORK.D9.

NOTE: There were 14641 observations read from the data set WORK.A4.

NOTE: 14641 observations added.

NOTE: The data set WORK.D9 has 58564 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A5 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A5 to WORK.D9.

NOTE: There were 14641 observations read from the data set WORK.A5.

NOTE: 14641 observations added.

NOTE: The data set WORK.D9 has 73205 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

657                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A6 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A6 to WORK.D9.

NOTE: There were 14641 observations read from the data set WORK.A6.

NOTE: 14641 observations added.

NOTE: The data set WORK.D9 has 87846 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A7 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.03 seconds

      cpu time            0.00 seconds

      

658                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A7 to WORK.D9.

NOTE: There were 14641 observations read from the data set WORK.A7.

NOTE: 14641 observations added.

NOTE: The data set WORK.D9 has 102487 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.18 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A8 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D9.

NOTE: There were 14641 observations read from the data set WORK.A8.

NOTE: 14641 observations added.

NOTE: The data set WORK.D9 has 117128 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

659                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A9 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D9.

NOTE: There were 14641 observations read from the data set WORK.A9.

NOTE: 14641 observations added.

NOTE: The data set WORK.D9 has 131769 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A10 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D9.

NOTE: There were 14641 observations read from the data set WORK.A10.

NOTE: 14641 observations added.

NOTE: The data set WORK.D9 has 146410 observations and 4 variables.

660                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LOWFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A11 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D9.

NOTE: There were 14641 observations read from the data set WORK.A11.

NOTE: 14641 observations added.

NOTE: The data set WORK.D9 has 161051 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D3 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

661                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 161051 observations read from the data set WORK.D9.

NOTE: The data set TEMP.LOW_OT has 161051 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Deleting WORK.D9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D10 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D4 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D8 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D5 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.HIGHCOMM3 (memtype=DATA).

NOTE: Deleting WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHPASS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHREC3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTSHIPS3 (memtype=DATA).

662                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.LOWCOMM3 (memtype=DATA).

NOTE: Deleting WORK.LOWCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWPASS3 (memtype=DATA).

NOTE: Deleting WORK.LOWREC3 (memtype=DATA).

NOTE: Deleting WORK.LOWTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.LARGE2 created, with 161051 rows and 14 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.17 seconds

      cpu time            0.23 seconds

      

NOTE: Variable cs_cost is uninitialized.

NOTE: Variable cf_cost is uninitialized.

NOTE: Variable fb_cost is uninitialized.

NOTE: Variable rs_cost is uninitialized.

NOTE: Variable ts_cost is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      161051 at 5655:140   161051 at 5655:164   161051 at 5655:188  
161051 at 5655:16    161051 at 5655:64    

NOTE: There were 161051 observations read from the data set WORK.LARGE2.

NOTE: The data set WORK.LARGE3 has 161051 observations and 20 variables.

NOTE: DATA statement used (Total process time):

      real time           0.18 seconds

      cpu time            0.18 seconds

      

NOTE: Deleting WORK.LARGE2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.LARGE3A created, with 161051 rows and 31 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           2.60 seconds

      cpu time            0.37 seconds

      

663                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.LARGE3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 161051 observations read from the data set
WORK.LARGE3A.

NOTE: The data set WORK.LARGE3B has 161051 observations and 43
variables.

NOTE: DATA statement used (Total process time):

      real time           0.21 seconds

      cpu time            0.21 seconds

      

NOTE: Deleting WORK.LARGE3A (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.LARGE4 created, with 161051 rows and 34 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.31 seconds

      cpu time            0.40 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set TEMP4.LARGE4 has 161051 observations and 34
variables.

NOTE: DATA statement used (Total process time):

      real time           2.90 seconds

      cpu time            0.18 seconds

      

NOTE: Deleting WORK.LARGE3B (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.76 seconds

      cpu time            0.01 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L1 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

664                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.L2 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L3 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L4 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L5 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L6 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L7 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.07 seconds

      cpu time            0.07 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L8 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.07 seconds

      cpu time            0.07 seconds

      

665                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L9 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.07 seconds

      cpu time            0.07 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L10 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L11 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.07 seconds

      cpu time            0.07 seconds

      

NOTE: There were 161051 observations read from the data set WORK.L1.

NOTE: There were 161051 observations read from the data set WORK.L2.

NOTE: There were 161051 observations read from the data set WORK.L3.

NOTE: There were 161051 observations read from the data set WORK.L4.

NOTE: There were 161051 observations read from the data set WORK.L5.

NOTE: There were 161051 observations read from the data set WORK.L6.

NOTE: There were 161051 observations read from the data set WORK.L7.

NOTE: There were 161051 observations read from the data set WORK.L8.

NOTE: There were 161051 observations read from the data set WORK.L9.

NOTE: There were 161051 observations read from the data set WORK.L10.

NOTE: There were 161051 observations read from the data set WORK.L11.

NOTE: The data set WORK.L has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.37 seconds

      cpu time            0.37 seconds

      

NOTE: Deleting WORK.L1 (memtype=DATA).

NOTE: Deleting WORK.L2 (memtype=DATA).

NOTE: Deleting WORK.L3 (memtype=DATA).

NOTE: Deleting WORK.L4 (memtype=DATA).

NOTE: Deleting WORK.L5 (memtype=DATA).

NOTE: Deleting WORK.L6 (memtype=DATA).

NOTE: Deleting WORK.L7 (memtype=DATA).

NOTE: Deleting WORK.L8 (memtype=DATA).

NOTE: Deleting WORK.L9 (memtype=DATA).

NOTE: Deleting WORK.L10 (memtype=DATA).

NOTE: Deleting WORK.L11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

666                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.01 seconds

      

NOTE: There were 1771561 observations read from the data set WORK.L.

NOTE: The data set WORK.L has 1771561 observations and 2 variables.

NOTE: PROCEDURE SORT used (Total process time):

      real time           3.68 seconds

      cpu time            1.43 seconds

      

NOTE: The data set TEMP4.LOW_OT has 1 observations and 102 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           0.57 seconds

      cpu time            0.56 seconds

      

NOTE: Deleting WORK.L (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.LARGE5 has 161051 observations and 46 variables.

NOTE: DATA statement used (Total process time):

      real time           0.31 seconds

      cpu time            0.28 seconds

      

NOTE: Deleting WORK.LARGE4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D1 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.10 seconds

      cpu time            0.14 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D2 created, with 1 rows and 3 columns.

667                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.10 seconds

      cpu time            0.12 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D3 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.10 seconds

      cpu time            0.12 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D4 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.11 seconds

      cpu time            0.15 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D5 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.10 seconds

      cpu time            0.15 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D6 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.09 seconds

      cpu time            0.14 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D7 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           1.21 seconds

      cpu time            0.18 seconds

668                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D8 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           1.09 seconds

      cpu time            0.17 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D9 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.15 seconds

      cpu time            0.12 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D10 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.12 seconds

      cpu time            0.17 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D11 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.12 seconds

      cpu time            0.15 seconds

      

NOTE: Deleting WORK.LARGE5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.D1.

NOTE: There were 1 observations read from the data set WORK.D2.

NOTE: There were 1 observations read from the data set WORK.D3.

NOTE: There were 1 observations read from the data set WORK.D4.

669                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.D5.

NOTE: There were 1 observations read from the data set WORK.D6.

NOTE: There were 1 observations read from the data set WORK.D7.

NOTE: There were 1 observations read from the data set WORK.D8.

NOTE: There were 1 observations read from the data set WORK.D9.

NOTE: There were 1 observations read from the data set WORK.D10.

NOTE: There were 1 observations read from the data set WORK.D11.

NOTE: The data set TEMP.LOWOUTDATA_OT has 1 observations and 13
variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

5656       
/**********************************************************************

5657        *   PRODUCT:   SAS

5658        *   VERSION:   9.2

5659        *   CREATOR:   External File Interface

5660        *   DATE:      21NOV08

5661        *   DESC:      Generated SAS Datastep Code

5662        *   TEMPLATE SOURCE:  (None Specified.)

5663       
***********************************************************************/

5664           data _null_;

5665           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

5666           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

5667           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_OT.csv' delimiter=',' DSD

5667     ! DROPOVER lrecl=32767;

5668           if _n_ = 1 then        /* write column names or labels */

5669            do;

5670              put

5671                 "NAICS"

5672              ','

5673                 "D"

5674              ','

5675                 "percent1"

5676              ','

5677                 "percent2"

5678              ','

5679                 "percent3"

5680              ','

5681                 "percent4"

5682              ','

5683                 "percent5"

5684              ','

5685                 "percent6"

5686              ','

5687                 "percent7"

5688              ','

5689                 "percent8"

5690              ','

5691                 "percent9"

5692              ','

5693                 "percent10"

5694              ','

670                                                        The SAS
System                            15:50 Friday, November 21, 2008

5695                 "percent11"

5696              ;

5697            end;

5698          set  TEMP.LOWOUTDATA_OT   end=EFIEOD;

5699              format NAICS $16. ;

5700              format D best12. ;

5701              format percent1 percent8.2 ;

5702              format percent2 percent8.2 ;

5703              format percent3 percent8.2 ;

5704              format percent4 percent8.2 ;

5705              format percent5 percent8.2 ;

5706              format percent6 percent8.2 ;

5707              format percent7 percent8.2 ;

5708              format percent8 percent8.2 ;

5709              format percent9 percent8.2 ;

5710              format percent10 percent8.2 ;

5711              format percent11 percent8.2 ;

5712            do;

5713              EFIOUT + 1;

5714              put NAICS $ @;

5715              put D @;

5716              put percent1 @;

5717              put percent2 @;

5718              put percent3 @;

5719              put percent4 @;

5720              put percent5 @;

5721              put percent6 @;

5722              put percent7 @;

5723              put percent8 @;

5724              put percent9 @;

5725              put percent10 @;

5726              put percent11 ;

5727              ;

5728            end;

5729           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

5730           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

5731           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_OT.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_OT.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:22:47,

      Create Time=21Nov2008:16:22:47

NOTE: 2 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_OT.csv'.

      The minimum record length was 85.

      The maximum record length was 108.

NOTE: There were 1 observations read from the data set
TEMP.LOWOUTDATA_OT.

NOTE: At least one W.D format was too small for the number to be
printed. The decimal may be shifted by the "BEST" format.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

671                                                        The SAS
System                            15:50 Friday, November 21, 2008

1 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_OT.csv from TEMP.LOWOUTDATA_OT.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Lowthresholds_OT.csv" file was successfully
created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.06 seconds

      cpu time            0.03 seconds

      

5732       
/**********************************************************************

5733        *   PRODUCT:   SAS

5734        *   VERSION:   9.2

5735        *   CREATOR:   External File Interface

5736        *   DATE:      21NOV08

5737        *   DESC:      Generated SAS Datastep Code

5738        *   TEMPLATE SOURCE:  (None Specified.)

5739       
***********************************************************************/

5740           data _null_;

5741           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

5742           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

5743           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_OT.csv' delimiter=',' DSD DROPOVER

5743     ! lrecl=32767;

5744           if _n_ = 1 then        /* write column names or labels */

5745            do;

5746              put

5747                 "P_A"

5748              ','

5749                 "P_100"

5750              ','

5751                 "P_0"

5752              ','

5753                 "P_1"

5754              ','

5755                 "P_2"

5756              ','

5757                 "P_3"

5758              ','

5759                 "P_4"

5760              ','

5761                 "P_5"

5762              ','

5763                 "P_6"

5764              ','

5765                 "P_7"

5766              ','

5767                 "P_8"

5768              ','

5769                 "P_9"

5770              ','

5771                 "P_10"

5772              ','

5773                 "P_11"

5774              ','

672                                                        The SAS
System                            15:50 Friday, November 21, 2008

5775                 "P_12"

5776              ','

5777                 "P_13"

5778              ','

5779                 "P_14"

5780              ','

5781                 "P_15"

5782              ','

5783                 "P_16"

5784              ','

5785                 "P_17"

5786              ','

5787                 "P_18"

5788              ','

5789                 "P_19"

5790              ','

5791                 "P_20"

5792              ','

5793                 "P_21"

5794              ','

5795                 "P_22"

5796              ','

5797                 "P_23"

5798              ','

5799                 "P_24"

5800              ','

5801                 "P_25"

5802              ','

5803                 "P_26"

5804              ','

5805                 "P_27"

5806              ','

5807                 "P_28"

5808              ','

5809                 "P_29"

5810              ','

5811                 "P_30"

5812              ','

5813                 "P_31"

5814              ','

5815                 "P_32"

5816              ','

5817                 "P_33"

5818              ','

5819                 "P_34"

5820              ','

5821                 "P_35"

5822              ','

5823                 "P_36"

5824              ','

5825                 "P_37"

5826              ','

5827                 "P_38"

5828              ','

673                                                        The SAS
System                            15:50 Friday, November 21, 2008

5829                 "P_39"

5830              ','

5831                 "P_40"

5832              ','

5833                 "P_41"

5834              ','

5835                 "P_42"

5836              ','

5837                 "P_43"

5838              ','

5839                 "P_44"

5840              ','

5841                 "P_45"

5842              ','

5843                 "P_46"

5844              ','

5845                 "P_47"

5846              ','

5847                 "P_48"

5848              ','

5849                 "P_49"

5850              ','

5851                 "P_50"

5852              ','

5853                 "P_51"

5854              ','

5855                 "P_52"

5856              ','

5857                 "P_53"

5858              ','

5859                 "P_54"

5860              ','

5861                 "P_55"

5862              ','

5863                 "P_56"

5864              ','

5865                 "P_57"

5866              ','

5867                 "P_58"

5868              ','

5869                 "P_59"

5870              ','

5871                 "P_60"

5872              ','

5873                 "P_61"

5874              ','

5875                 "P_62"

5876              ','

5877                 "P_63"

5878              ','

5879                 "P_64"

5880              ','

5881                 "P_65"

5882              ','

674                                                        The SAS
System                            15:50 Friday, November 21, 2008

5883                 "P_66"

5884              ','

5885                 "P_67"

5886              ','

5887                 "P_68"

5888              ','

5889                 "P_69"

5890              ','

5891                 "P_70"

5892              ','

5893                 "P_71"

5894              ','

5895                 "P_72"

5896              ','

5897                 "P_73"

5898              ','

5899                 "P_74"

5900              ','

5901                 "P_75"

5902              ','

5903                 "P_76"

5904              ','

5905                 "P_77"

5906              ','

5907                 "P_78"

5908              ','

5909                 "P_79"

5910              ','

5911                 "P_80"

5912              ','

5913                 "P_81"

5914              ','

5915                 "P_82"

5916              ','

5917                 "P_83"

5918              ','

5919                 "P_84"

5920              ','

5921                 "P_85"

5922              ','

5923                 "P_86"

5924              ','

5925                 "P_87"

5926              ','

5927                 "P_88"

5928              ','

5929                 "P_89"

5930              ','

5931                 "P_90"

5932              ','

5933                 "P_91"

5934              ','

5935                 "P_92"

5936              ','

675                                                        The SAS
System                            15:50 Friday, November 21, 2008

5937                 "P_93"

5938              ','

5939                 "P_94"

5940              ','

5941                 "P_95"

5942              ','

5943                 "P_96"

5944              ','

5945                 "P_97"

5946              ','

5947                 "P_98"

5948              ','

5949                 "P_99"

5950              ;

5951            end;

5952          set  TEMP4.LOW_OT   end=EFIEOD;

5953              format P_A best12. ;

5954              format P_100 best12. ;

5955              format P_0 best12. ;

5956              format P_1 best12. ;

5957              format P_2 best12. ;

5958              format P_3 best12. ;

5959              format P_4 best12. ;

5960              format P_5 best12. ;

5961              format P_6 best12. ;

5962              format P_7 best12. ;

5963              format P_8 best12. ;

5964              format P_9 best12. ;

5965              format P_10 best12. ;

5966              format P_11 best12. ;

5967              format P_12 best12. ;

5968              format P_13 best12. ;

5969              format P_14 best12. ;

5970              format P_15 best12. ;

5971              format P_16 best12. ;

5972              format P_17 best12. ;

5973              format P_18 best12. ;

5974              format P_19 best12. ;

5975              format P_20 best12. ;

5976              format P_21 best12. ;

5977              format P_22 best12. ;

5978              format P_23 best12. ;

5979              format P_24 best12. ;

5980              format P_25 best12. ;

5981              format P_26 best12. ;

5982              format P_27 best12. ;

5983              format P_28 best12. ;

5984              format P_29 best12. ;

5985              format P_30 best12. ;

5986              format P_31 best12. ;

5987              format P_32 best12. ;

5988              format P_33 best12. ;

5989              format P_34 best12. ;

5990              format P_35 best12. ;

676                                                        The SAS
System                            15:50 Friday, November 21, 2008

5991              format P_36 best12. ;

5992              format P_37 best12. ;

5993              format P_38 best12. ;

5994              format P_39 best12. ;

5995              format P_40 best12. ;

5996              format P_41 best12. ;

5997              format P_42 best12. ;

5998              format P_43 best12. ;

5999              format P_44 best12. ;

6000              format P_45 best12. ;

6001              format P_46 best12. ;

6002              format P_47 best12. ;

6003              format P_48 best12. ;

6004              format P_49 best12. ;

6005              format P_50 best12. ;

6006              format P_51 best12. ;

6007              format P_52 best12. ;

6008              format P_53 best12. ;

6009              format P_54 best12. ;

6010              format P_55 best12. ;

6011              format P_56 best12. ;

6012              format P_57 best12. ;

6013              format P_58 best12. ;

6014              format P_59 best12. ;

6015              format P_60 best12. ;

6016              format P_61 best12. ;

6017              format P_62 best12. ;

6018              format P_63 best12. ;

6019              format P_64 best12. ;

6020              format P_65 best12. ;

6021              format P_66 best12. ;

6022              format P_67 best12. ;

6023              format P_68 best12. ;

6024              format P_69 best12. ;

6025              format P_70 best12. ;

6026              format P_71 best12. ;

6027              format P_72 best12. ;

6028              format P_73 best12. ;

6029              format P_74 best12. ;

6030              format P_75 best12. ;

6031              format P_76 best12. ;

6032              format P_77 best12. ;

6033              format P_78 best12. ;

6034              format P_79 best12. ;

6035              format P_80 best12. ;

6036              format P_81 best12. ;

6037              format P_82 best12. ;

6038              format P_83 best12. ;

6039              format P_84 best12. ;

6040              format P_85 best12. ;

6041              format P_86 best12. ;

6042              format P_87 best12. ;

6043              format P_88 best12. ;

6044              format P_89 best12. ;

677                                                        The SAS
System                            15:50 Friday, November 21, 2008

6045              format P_90 best12. ;

6046              format P_91 best12. ;

6047              format P_92 best12. ;

6048              format P_93 best12. ;

6049              format P_94 best12. ;

6050              format P_95 best12. ;

6051              format P_96 best12. ;

6052              format P_97 best12. ;

6053              format P_98 best12. ;

6054              format P_99 best12. ;

6055            do;

6056              EFIOUT + 1;

6057              put P_A @;

6058              put P_100 @;

6059              put P_0 @;

6060              put P_1 @;

6061              put P_2 @;

6062              put P_3 @;

6063              put P_4 @;

6064              put P_5 @;

6065              put P_6 @;

6066              put P_7 @;

6067              put P_8 @;

6068              put P_9 @;

6069              put P_10 @;

6070              put P_11 @;

6071              put P_12 @;

6072              put P_13 @;

6073              put P_14 @;

6074              put P_15 @;

6075              put P_16 @;

6076              put P_17 @;

6077              put P_18 @;

6078              put P_19 @;

6079              put P_20 @;

6080              put P_21 @;

6081              put P_22 @;

6082              put P_23 @;

6083              put P_24 @;

6084              put P_25 @;

6085              put P_26 @;

6086              put P_27 @;

6087              put P_28 @;

6088              put P_29 @;

6089              put P_30 @;

6090              put P_31 @;

6091              put P_32 @;

6092              put P_33 @;

6093              put P_34 @;

6094              put P_35 @;

6095              put P_36 @;

6096              put P_37 @;

6097              put P_38 @;

6098              put P_39 @;

678                                                        The SAS
System                            15:50 Friday, November 21, 2008

6099              put P_40 @;

6100              put P_41 @;

6101              put P_42 @;

6102              put P_43 @;

6103              put P_44 @;

6104              put P_45 @;

6105              put P_46 @;

6106              put P_47 @;

6107              put P_48 @;

6108              put P_49 @;

6109              put P_50 @;

6110              put P_51 @;

6111              put P_52 @;

6112              put P_53 @;

6113              put P_54 @;

6114              put P_55 @;

6115              put P_56 @;

6116              put P_57 @;

6117              put P_58 @;

6118              put P_59 @;

6119              put P_60 @;

6120              put P_61 @;

6121              put P_62 @;

6122              put P_63 @;

6123              put P_64 @;

6124              put P_65 @;

6125              put P_66 @;

6126              put P_67 @;

6127              put P_68 @;

6128              put P_69 @;

6129              put P_70 @;

6130              put P_71 @;

6131              put P_72 @;

6132              put P_73 @;

6133              put P_74 @;

6134              put P_75 @;

6135              put P_76 @;

6136              put P_77 @;

6137              put P_78 @;

6138              put P_79 @;

6139              put P_80 @;

6140              put P_81 @;

6141              put P_82 @;

6142              put P_83 @;

6143              put P_84 @;

6144              put P_85 @;

6145              put P_86 @;

6146              put P_87 @;

6147              put P_88 @;

6148              put P_89 @;

6149              put P_90 @;

6150              put P_91 @;

6151              put P_92 @;

6152              put P_93 @;

679                                                        The SAS
System                            15:50 Friday, November 21, 2008

6153              put P_94 @;

6154              put P_95 @;

6155              put P_96 @;

6156              put P_97 @;

6157              put P_98 @;

6158              put P_99 ;

6159              ;

6160            end;

6161           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

6162           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

6163           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_OT.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_OT.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:22:47,

      Create Time=21Nov2008:16:22:47

NOTE: 2 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_OT.csv'.

      The minimum record length was 499.

      The maximum record length was 1235.

NOTE: There were 1 observations read from the data set TEMP4.LOW_OT.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

1 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_OT.csv from TEMP4.LOW_OT.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_Low_OT.csv" file was successfully created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

6164       %ptiles(High);

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: Deleting WORK.D10 (memtype=DATA).

NOTE: Deleting WORK.D11 (memtype=DATA).

NOTE: Deleting WORK.D2 (memtype=DATA).

NOTE: Deleting WORK.D3 (memtype=DATA).

NOTE: Deleting WORK.D4 (memtype=DATA).

NOTE: Deleting WORK.D5 (memtype=DATA).

NOTE: Deleting WORK.D6 (memtype=DATA).

NOTE: Deleting WORK.D7 (memtype=DATA).

NOTE: Deleting WORK.D8 (memtype=DATA).

NOTE: Deleting WORK.D9 (memtype=DATA).

NOTE: Deleting WORK.X (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

680                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Copying TEMP3.HIGHCOMM3 to WORK.HIGHCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHCOMM3.

NOTE: The data set WORK.HIGHCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHCRUISE3 to WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHCRUISE3.

NOTE: The data set WORK.HIGHCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFBARGE3 to WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFBARGE3.

NOTE: The data set WORK.HIGHFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFSHIPS3 to WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFSHIPS3.

NOTE: The data set WORK.HIGHFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHPASS3 to WORK.HIGHPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHPASS3.

NOTE: The data set WORK.HIGHPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHREC3 to WORK.HIGHREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHREC3.

NOTE: The data set WORK.HIGHREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.HIGHTBARGE3 to WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTBARGE3.

NOTE: The data set WORK.HIGHTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHTSHIPS3 to WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTSHIPS3.

NOTE: The data set WORK.HIGHTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHUTILITY3 to WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHUTILITY3.

NOTE: The data set WORK.HIGHUTILITY3 has 11 observations and 1
variables.

NOTE: Copying TEMP3.LOWCOMM3 to WORK.LOWCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWCOMM3.

NOTE: The data set WORK.LOWCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWCRUISE3 to WORK.LOWCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWCRUISE3.

NOTE: The data set WORK.LOWCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFBARGE3 to WORK.LOWFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFBARGE3.

NOTE: The data set WORK.LOWFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFSHIPS3 to WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFSHIPS3.

NOTE: The data set WORK.LOWFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWPASS3 to WORK.LOWPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWPASS3.

NOTE: The data set WORK.LOWPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWREC3 to WORK.LOWREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWREC3.

NOTE: The data set WORK.LOWREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.LOWTBARGE3 to WORK.LOWTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTBARGE3.

NOTE: The data set WORK.LOWTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWTSHIPS3 to WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTSHIPS3.

NOTE: The data set WORK.LOWTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWUTILITY3 to WORK.LOWUTILITY3 (memtype=DATA).

681                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set
TEMP3.LOWUTILITY3.

NOTE: The data set WORK.LOWUTILITY3 has 11 observations and 1 variables.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting TEMP.LOWOUTDATA_OT (memtype=DATA).

NOTE: Deleting TEMP.LOW_OT (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.N (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: The file WORK.D1 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A1 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D1.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 11 observations read from the data set WORK.A1.

NOTE: The data set WORK.D1 has 11 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

682                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A2 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A2.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 22 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A3 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

683                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A3 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A3.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 33 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A4 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A4.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 44 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

684                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A5 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A5.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 55 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A6 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A6.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 66 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

685                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A7 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A7.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 77 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

686                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A8 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A8.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 88 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A9 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A9.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 99 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

687                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A10 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A10.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 110 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A11 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

688                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Appending WORK.A11 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A11.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 121 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D1A (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A1 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D1A.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 121 observations read from the data set WORK.A1.

NOTE: The data set WORK.D1A has 121 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

689                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A2 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A2.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 242 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A3 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

690                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A3.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 363 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A4 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A4.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 484 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

691                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A5 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A5.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 605 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A6 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A6 to WORK.D1A.

692                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 121 observations read from the data set WORK.A6.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 726 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A7 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A7.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 847 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

693                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A8 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A8.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 968 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A9 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A9.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 1089 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

694                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A10 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A10.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 1210 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

695                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.A11 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A11.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 1331 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D2 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A1 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

696                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A1 to WORK.D2.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 1331 observations read from the data set WORK.A1.

NOTE: The data set WORK.D2 has 1331 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A2 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A2.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 2662 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

697                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A3 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A3.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 3993 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A4 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A4.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 5324 observations and 4 variables.

698                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A5 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A5.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 6655 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

699                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A6 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A6.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 7986 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A7 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A7 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A7.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 9317 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

700                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A8 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A8.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 10648 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A9 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

701                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A9.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 11979 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A10 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A10.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 13310 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

702                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A11 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A11.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 14641 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D1A (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D1B (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D7 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

703                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The file WORK.D3 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A1 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D3.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 14641 observations read from the data set WORK.A1.

NOTE: The data set WORK.D3 has 14641 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A2 has 14641 observations and 5 variables.

704                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A2.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 29282 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A3 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A3.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 43923 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

705                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A4 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A4.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 58564 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A5 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

706                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A5 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A5.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 73205 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A6 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A6 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A6.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 87846 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

707                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A7 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A7 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A7.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 102487 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A8 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A8.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 117128 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

708                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A9 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A9.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 131769 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

709                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A10 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A10.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 146410 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A11 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A11.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 161051 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

710                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D6 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D8 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A1 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A1 to WORK.D8.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 161051 observations read from the data set WORK.A1.

NOTE: The data set WORK.D8 has 161051 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

711                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A2 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A2 to WORK.D8.

NOTE: There were 161051 observations read from the data set WORK.A2.

NOTE: 161051 observations added.

NOTE: The data set WORK.D8 has 322102 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A3 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

712                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A3 to WORK.D8.

NOTE: There were 161051 observations read from the data set WORK.A3.

NOTE: 161051 observations added.

NOTE: The data set WORK.D8 has 483153 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A4 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A4 to WORK.D8.

NOTE: There were 161051 observations read from the data set WORK.A4.

NOTE: 161051 observations added.

NOTE: The data set WORK.D8 has 644204 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTSHIPS3.

713                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A5 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A5 to WORK.D8.

NOTE: There were 161051 observations read from the data set WORK.A5.

NOTE: 161051 observations added.

NOTE: The data set WORK.D8 has 805255 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A6 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A6 to WORK.D8.

NOTE: There were 161051 observations read from the data set WORK.A6.

NOTE: 161051 observations added.

NOTE: The data set WORK.D8 has 966306 observations and 6 variables.

714                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A7 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.40 seconds

      cpu time            0.03 seconds

      

NOTE: Appending WORK.A7 to WORK.D8.

NOTE: There were 161051 observations read from the data set WORK.A7.

NOTE: 161051 observations added.

NOTE: The data set WORK.D8 has 1127357 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.84 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

715                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A8 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.03 seconds

      

NOTE: Appending WORK.A8 to WORK.D8.

NOTE: There were 161051 observations read from the data set WORK.A8.

NOTE: 161051 observations added.

NOTE: The data set WORK.D8 has 1288408 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           1.12 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A9 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A9 to WORK.D8.

NOTE: There were 161051 observations read from the data set WORK.A9.

NOTE: 161051 observations added.

NOTE: The data set WORK.D8 has 1449459 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.28 seconds

      cpu time            0.03 seconds

      

716                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A10 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: Appending WORK.A10 to WORK.D8.

NOTE: There were 161051 observations read from the data set WORK.A10.

NOTE: 161051 observations added.

NOTE: The data set WORK.D8 has 1610510 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A11 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

717                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.06 seconds

      

NOTE: Appending WORK.A11 to WORK.D8.

NOTE: There were 161051 observations read from the data set WORK.A11.

NOTE: 161051 observations added.

NOTE: The data set WORK.D8 has 1771561 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D9 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D10 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D4 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1771561 observations read from the data set WORK.D8.

NOTE: The data set TEMP.HIGH_DF has 1771561 observations and 7
variables.

NOTE: DATA statement used (Total process time):

      real time           0.98 seconds

      cpu time            0.67 seconds

      

718                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.D8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D5 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.HIGHCOMM3 (memtype=DATA).

NOTE: Deleting WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHPASS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHREC3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.LOWCOMM3 (memtype=DATA).

NOTE: Deleting WORK.LOWCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWPASS3 (memtype=DATA).

NOTE: Deleting WORK.LOWREC3 (memtype=DATA).

NOTE: Deleting WORK.LOWTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.LARGE2 created, with 1771561 rows and 16 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           9.21 seconds

      cpu time            3.37 seconds

      

NOTE: Variable cs_cost is uninitialized.

NOTE: Variable cf_cost is uninitialized.

NOTE: Variable rs_cost is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1771561 at 6164:140   1771561 at 6164:164   1771561 at 6164:16    

NOTE: There were 1771561 observations read from the data set
WORK.LARGE2.

719                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.LARGE3 has 1771561 observations and 20
variables.

NOTE: DATA statement used (Total process time):

      real time           2.82 seconds

      cpu time            1.67 seconds

      

NOTE: Deleting WORK.LARGE2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           3.09 seconds

      cpu time            0.03 seconds

      

NOTE: Table WORK.LARGE3A created, with 1771561 rows and 31 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           10.06 seconds

      cpu time            5.65 seconds

      

NOTE: Deleting WORK.LARGE3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.09 seconds

      cpu time            0.04 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE3A.

NOTE: The data set WORK.LARGE3B has 1771561 observations and 43
variables.

NOTE: DATA statement used (Total process time):

      real time           5.79 seconds

      cpu time            2.17 seconds

      

NOTE: Deleting WORK.LARGE3A (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           3.20 seconds

      cpu time            0.06 seconds

      

NOTE: Table WORK.LARGE4 created, with 1771561 rows and 34 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           8.89 seconds

      cpu time            5.04 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set TEMP4.LARGE4 has 1771561 observations and 34
variables.

NOTE: DATA statement used (Total process time):

      real time           4.89 seconds

720                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            1.59 seconds

      

NOTE: Deleting WORK.LARGE3B (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           3.12 seconds

      cpu time            0.07 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L1 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           2.65 seconds

      cpu time            0.65 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L2 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           2.63 seconds

      cpu time            0.65 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L3 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           1.51 seconds

      cpu time            0.64 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L4 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           3.26 seconds

      cpu time            0.60 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L5 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           1.73 seconds

      cpu time            0.70 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L6 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

721                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           2.90 seconds

      cpu time            0.70 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L7 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           2.78 seconds

      cpu time            0.67 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L8 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           1.31 seconds

      cpu time            0.64 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L9 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           3.15 seconds

      cpu time            0.68 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L10 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.79 seconds

      cpu time            0.78 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L11 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.76 seconds

      cpu time            0.68 seconds

      

NOTE: There were 1771561 observations read from the data set WORK.L1.

NOTE: There were 1771561 observations read from the data set WORK.L2.

NOTE: There were 1771561 observations read from the data set WORK.L3.

NOTE: There were 1771561 observations read from the data set WORK.L4.

NOTE: There were 1771561 observations read from the data set WORK.L5.

NOTE: There were 1771561 observations read from the data set WORK.L6.

NOTE: There were 1771561 observations read from the data set WORK.L7.

NOTE: There were 1771561 observations read from the data set WORK.L8.

NOTE: There were 1771561 observations read from the data set WORK.L9.

NOTE: There were 1771561 observations read from the data set WORK.L10.

722                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1771561 observations read from the data set WORK.L11.

NOTE: The data set WORK.L has 19487171 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           6.32 seconds

      cpu time            3.68 seconds

      

NOTE: Deleting WORK.L1 (memtype=DATA).

NOTE: Deleting WORK.L2 (memtype=DATA).

NOTE: Deleting WORK.L3 (memtype=DATA).

NOTE: Deleting WORK.L4 (memtype=DATA).

NOTE: Deleting WORK.L5 (memtype=DATA).

NOTE: Deleting WORK.L6 (memtype=DATA).

NOTE: Deleting WORK.L7 (memtype=DATA).

NOTE: Deleting WORK.L8 (memtype=DATA).

NOTE: Deleting WORK.L9 (memtype=DATA).

NOTE: Deleting WORK.L10 (memtype=DATA).

NOTE: Deleting WORK.L11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: There were 19487171 observations read from the data set WORK.L.

NOTE: The data set WORK.L has 19487171 observations and 2 variables.

NOTE: PROCEDURE SORT used (Total process time):

      real time           14.98 seconds

      cpu time            17.31 seconds

      

NOTE: The data set TEMP4.HIGH_DF has 1 observations and 102 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           7.59 seconds

      cpu time            7.34 seconds

      

NOTE: Deleting WORK.L (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.LARGE5 has 1771561 observations and 46
variables.

NOTE: DATA statement used (Total process time):

      real time           6.34 seconds

      cpu time            3.34 seconds

      

723                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.LARGE4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 3 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D1 created, with 3 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           2.93 seconds

      cpu time            1.84 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D2 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           4.25 seconds

      cpu time            1.76 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D3 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           3.78 seconds

      cpu time            1.81 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D4 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           3.56 seconds

      cpu time            1.90 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D5 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           2.40 seconds

      cpu time            1.89 seconds

724                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D6 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           4.01 seconds

      cpu time            1.86 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D7 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           5.13 seconds

      cpu time            1.90 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D8 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           4.86 seconds

      cpu time            1.87 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D9 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           4.54 seconds

      cpu time            1.81 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D10 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           1.17 seconds

      cpu time            1.92 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

725                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D11 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           1.87 seconds

      cpu time            1.87 seconds

      

NOTE: Deleting WORK.LARGE5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.09 seconds

      cpu time            0.09 seconds

      

NOTE: There were 3 observations read from the data set WORK.D1.

NOTE: There were 2 observations read from the data set WORK.D2.

NOTE: There were 2 observations read from the data set WORK.D3.

NOTE: There were 1 observations read from the data set WORK.D4.

NOTE: There were 1 observations read from the data set WORK.D5.

NOTE: There were 1 observations read from the data set WORK.D6.

NOTE: There were 1 observations read from the data set WORK.D7.

NOTE: There were 1 observations read from the data set WORK.D8.

NOTE: There were 1 observations read from the data set WORK.D9.

NOTE: There were 1 observations read from the data set WORK.D10.

NOTE: There were 1 observations read from the data set WORK.D11.

NOTE: The data set TEMP.HIGHOUTDATA_DF has 3 observations and 13
variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

6165       
/**********************************************************************

6166        *   PRODUCT:   SAS

6167        *   VERSION:   9.2

6168        *   CREATOR:   External File Interface

6169        *   DATE:      21NOV08

6170        *   DESC:      Generated SAS Datastep Code

6171        *   TEMPLATE SOURCE:  (None Specified.)

6172       
***********************************************************************/

6173           data _null_;

6174           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

6175           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

6176           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_DF.csv' delimiter=',' DSD

6176     ! DROPOVER lrecl=32767;

6177           if _n_ = 1 then        /* write column names or labels */

6178            do;

6179              put

6180                 "NAICS"

6181              ','

6182                 "D"

6183              ','

726                                                        The SAS
System                            15:50 Friday, November 21, 2008

6184                 "percent1"

6185              ','

6186                 "percent2"

6187              ','

6188                 "percent3"

6189              ','

6190                 "percent4"

6191              ','

6192                 "percent5"

6193              ','

6194                 "percent6"

6195              ','

6196                 "percent7"

6197              ','

6198                 "percent8"

6199              ','

6200                 "percent9"

6201              ','

6202                 "percent10"

6203              ','

6204                 "percent11"

6205              ;

6206            end;

6207          set  TEMP.HIGHOUTDATA_DF   end=EFIEOD;

6208              format NAICS $16. ;

6209              format D best12. ;

6210              format percent1 percent8.2 ;

6211              format percent2 percent8.2 ;

6212              format percent3 percent8.2 ;

6213              format percent4 percent8.2 ;

6214              format percent5 percent8.2 ;

6215              format percent6 percent8.2 ;

6216              format percent7 percent8.2 ;

6217              format percent8 percent8.2 ;

6218              format percent9 percent8.2 ;

6219              format percent10 percent8.2 ;

6220              format percent11 percent8.2 ;

6221            do;

6222              EFIOUT + 1;

6223              put NAICS $ @;

6224              put D @;

6225              put percent1 @;

6226              put percent2 @;

6227              put percent3 @;

6228              put percent4 @;

6229              put percent5 @;

6230              put percent6 @;

6231              put percent7 @;

6232              put percent8 @;

6233              put percent9 @;

6234              put percent10 @;

6235              put percent11 ;

6236              ;

6237            end;

727                                                        The SAS
System                            15:50 Friday, November 21, 2008

6238           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

6239           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

6240           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_DF.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_DF.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:25:21,

      Create Time=21Nov2008:16:25:21

NOTE: 4 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_DF.csv'.

      The minimum record length was 31.

      The maximum record length was 108.

NOTE: There were 3 observations read from the data set
TEMP.HIGHOUTDATA_DF.

NOTE: At least one W.D format was too small for the number to be
printed. The decimal may be shifted by the "BEST" format.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

3 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_DF.csv from TEMP.HIGHOUTDATA_DF.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_DF.csv" file was successfully
created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.04 seconds

      cpu time            0.03 seconds

      

6241       
/**********************************************************************

6242        *   PRODUCT:   SAS

6243        *   VERSION:   9.2

6244        *   CREATOR:   External File Interface

6245        *   DATE:      21NOV08

6246        *   DESC:      Generated SAS Datastep Code

6247        *   TEMPLATE SOURCE:  (None Specified.)

6248       
***********************************************************************/

6249           data _null_;

6250           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

6251           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

6252           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_DF.csv' delimiter=',' DSD DROPOVER

6252     ! lrecl=32767;

6253           if _n_ = 1 then        /* write column names or labels */

6254            do;

6255              put

6256                 "P_A"

6257              ','

6258                 "P_100"

6259              ','

6260                 "P_0"

6261              ','

6262                 "P_1"

6263              ','

728                                                        The SAS
System                            15:50 Friday, November 21, 2008

6264                 "P_2"

6265              ','

6266                 "P_3"

6267              ','

6268                 "P_4"

6269              ','

6270                 "P_5"

6271              ','

6272                 "P_6"

6273              ','

6274                 "P_7"

6275              ','

6276                 "P_8"

6277              ','

6278                 "P_9"

6279              ','

6280                 "P_10"

6281              ','

6282                 "P_11"

6283              ','

6284                 "P_12"

6285              ','

6286                 "P_13"

6287              ','

6288                 "P_14"

6289              ','

6290                 "P_15"

6291              ','

6292                 "P_16"

6293              ','

6294                 "P_17"

6295              ','

6296                 "P_18"

6297              ','

6298                 "P_19"

6299              ','

6300                 "P_20"

6301              ','

6302                 "P_21"

6303              ','

6304                 "P_22"

6305              ','

6306                 "P_23"

6307              ','

6308                 "P_24"

6309              ','

6310                 "P_25"

6311              ','

6312                 "P_26"

6313              ','

6314                 "P_27"

6315              ','

6316                 "P_28"

6317              ','

729                                                        The SAS
System                            15:50 Friday, November 21, 2008

6318                 "P_29"

6319              ','

6320                 "P_30"

6321              ','

6322                 "P_31"

6323              ','

6324                 "P_32"

6325              ','

6326                 "P_33"

6327              ','

6328                 "P_34"

6329              ','

6330                 "P_35"

6331              ','

6332                 "P_36"

6333              ','

6334                 "P_37"

6335              ','

6336                 "P_38"

6337              ','

6338                 "P_39"

6339              ','

6340                 "P_40"

6341              ','

6342                 "P_41"

6343              ','

6344                 "P_42"

6345              ','

6346                 "P_43"

6347              ','

6348                 "P_44"

6349              ','

6350                 "P_45"

6351              ','

6352                 "P_46"

6353              ','

6354                 "P_47"

6355              ','

6356                 "P_48"

6357              ','

6358                 "P_49"

6359              ','

6360                 "P_50"

6361              ','

6362                 "P_51"

6363              ','

6364                 "P_52"

6365              ','

6366                 "P_53"

6367              ','

6368                 "P_54"

6369              ','

6370                 "P_55"

6371              ','

730                                                        The SAS
System                            15:50 Friday, November 21, 2008

6372                 "P_56"

6373              ','

6374                 "P_57"

6375              ','

6376                 "P_58"

6377              ','

6378                 "P_59"

6379              ','

6380                 "P_60"

6381              ','

6382                 "P_61"

6383              ','

6384                 "P_62"

6385              ','

6386                 "P_63"

6387              ','

6388                 "P_64"

6389              ','

6390                 "P_65"

6391              ','

6392                 "P_66"

6393              ','

6394                 "P_67"

6395              ','

6396                 "P_68"

6397              ','

6398                 "P_69"

6399              ','

6400                 "P_70"

6401              ','

6402                 "P_71"

6403              ','

6404                 "P_72"

6405              ','

6406                 "P_73"

6407              ','

6408                 "P_74"

6409              ','

6410                 "P_75"

6411              ','

6412                 "P_76"

6413              ','

6414                 "P_77"

6415              ','

6416                 "P_78"

6417              ','

6418                 "P_79"

6419              ','

6420                 "P_80"

6421              ','

6422                 "P_81"

6423              ','

6424                 "P_82"

6425              ','

731                                                        The SAS
System                            15:50 Friday, November 21, 2008

6426                 "P_83"

6427              ','

6428                 "P_84"

6429              ','

6430                 "P_85"

6431              ','

6432                 "P_86"

6433              ','

6434                 "P_87"

6435              ','

6436                 "P_88"

6437              ','

6438                 "P_89"

6439              ','

6440                 "P_90"

6441              ','

6442                 "P_91"

6443              ','

6444                 "P_92"

6445              ','

6446                 "P_93"

6447              ','

6448                 "P_94"

6449              ','

6450                 "P_95"

6451              ','

6452                 "P_96"

6453              ','

6454                 "P_97"

6455              ','

6456                 "P_98"

6457              ','

6458                 "P_99"

6459              ;

6460            end;

6461          set  TEMP4.HIGH_DF   end=EFIEOD;

6462              format P_A best12. ;

6463              format P_100 best12. ;

6464              format P_0 best12. ;

6465              format P_1 best12. ;

6466              format P_2 best12. ;

6467              format P_3 best12. ;

6468              format P_4 best12. ;

6469              format P_5 best12. ;

6470              format P_6 best12. ;

6471              format P_7 best12. ;

6472              format P_8 best12. ;

6473              format P_9 best12. ;

6474              format P_10 best12. ;

6475              format P_11 best12. ;

6476              format P_12 best12. ;

6477              format P_13 best12. ;

6478              format P_14 best12. ;

6479              format P_15 best12. ;

732                                                        The SAS
System                            15:50 Friday, November 21, 2008

6480              format P_16 best12. ;

6481              format P_17 best12. ;

6482              format P_18 best12. ;

6483              format P_19 best12. ;

6484              format P_20 best12. ;

6485              format P_21 best12. ;

6486              format P_22 best12. ;

6487              format P_23 best12. ;

6488              format P_24 best12. ;

6489              format P_25 best12. ;

6490              format P_26 best12. ;

6491              format P_27 best12. ;

6492              format P_28 best12. ;

6493              format P_29 best12. ;

6494              format P_30 best12. ;

6495              format P_31 best12. ;

6496              format P_32 best12. ;

6497              format P_33 best12. ;

6498              format P_34 best12. ;

6499              format P_35 best12. ;

6500              format P_36 best12. ;

6501              format P_37 best12. ;

6502              format P_38 best12. ;

6503              format P_39 best12. ;

6504              format P_40 best12. ;

6505              format P_41 best12. ;

6506              format P_42 best12. ;

6507              format P_43 best12. ;

6508              format P_44 best12. ;

6509              format P_45 best12. ;

6510              format P_46 best12. ;

6511              format P_47 best12. ;

6512              format P_48 best12. ;

6513              format P_49 best12. ;

6514              format P_50 best12. ;

6515              format P_51 best12. ;

6516              format P_52 best12. ;

6517              format P_53 best12. ;

6518              format P_54 best12. ;

6519              format P_55 best12. ;

6520              format P_56 best12. ;

6521              format P_57 best12. ;

6522              format P_58 best12. ;

6523              format P_59 best12. ;

6524              format P_60 best12. ;

6525              format P_61 best12. ;

6526              format P_62 best12. ;

6527              format P_63 best12. ;

6528              format P_64 best12. ;

6529              format P_65 best12. ;

6530              format P_66 best12. ;

6531              format P_67 best12. ;

6532              format P_68 best12. ;

6533              format P_69 best12. ;

733                                                        The SAS
System                            15:50 Friday, November 21, 2008

6534              format P_70 best12. ;

6535              format P_71 best12. ;

6536              format P_72 best12. ;

6537              format P_73 best12. ;

6538              format P_74 best12. ;

6539              format P_75 best12. ;

6540              format P_76 best12. ;

6541              format P_77 best12. ;

6542              format P_78 best12. ;

6543              format P_79 best12. ;

6544              format P_80 best12. ;

6545              format P_81 best12. ;

6546              format P_82 best12. ;

6547              format P_83 best12. ;

6548              format P_84 best12. ;

6549              format P_85 best12. ;

6550              format P_86 best12. ;

6551              format P_87 best12. ;

6552              format P_88 best12. ;

6553              format P_89 best12. ;

6554              format P_90 best12. ;

6555              format P_91 best12. ;

6556              format P_92 best12. ;

6557              format P_93 best12. ;

6558              format P_94 best12. ;

6559              format P_95 best12. ;

6560              format P_96 best12. ;

6561              format P_97 best12. ;

6562              format P_98 best12. ;

6563              format P_99 best12. ;

6564            do;

6565              EFIOUT + 1;

6566              put P_A @;

6567              put P_100 @;

6568              put P_0 @;

6569              put P_1 @;

6570              put P_2 @;

6571              put P_3 @;

6572              put P_4 @;

6573              put P_5 @;

6574              put P_6 @;

6575              put P_7 @;

6576              put P_8 @;

6577              put P_9 @;

6578              put P_10 @;

6579              put P_11 @;

6580              put P_12 @;

6581              put P_13 @;

6582              put P_14 @;

6583              put P_15 @;

6584              put P_16 @;

6585              put P_17 @;

6586              put P_18 @;

6587              put P_19 @;

734                                                        The SAS
System                            15:50 Friday, November 21, 2008

6588              put P_20 @;

6589              put P_21 @;

6590              put P_22 @;

6591              put P_23 @;

6592              put P_24 @;

6593              put P_25 @;

6594              put P_26 @;

6595              put P_27 @;

6596              put P_28 @;

6597              put P_29 @;

6598              put P_30 @;

6599              put P_31 @;

6600              put P_32 @;

6601              put P_33 @;

6602              put P_34 @;

6603              put P_35 @;

6604              put P_36 @;

6605              put P_37 @;

6606              put P_38 @;

6607              put P_39 @;

6608              put P_40 @;

6609              put P_41 @;

6610              put P_42 @;

6611              put P_43 @;

6612              put P_44 @;

6613              put P_45 @;

6614              put P_46 @;

6615              put P_47 @;

6616              put P_48 @;

6617              put P_49 @;

6618              put P_50 @;

6619              put P_51 @;

6620              put P_52 @;

6621              put P_53 @;

6622              put P_54 @;

6623              put P_55 @;

6624              put P_56 @;

6625              put P_57 @;

6626              put P_58 @;

6627              put P_59 @;

6628              put P_60 @;

6629              put P_61 @;

6630              put P_62 @;

6631              put P_63 @;

6632              put P_64 @;

6633              put P_65 @;

6634              put P_66 @;

6635              put P_67 @;

6636              put P_68 @;

6637              put P_69 @;

6638              put P_70 @;

6639              put P_71 @;

6640              put P_72 @;

6641              put P_73 @;

735                                                        The SAS
System                            15:50 Friday, November 21, 2008

6642              put P_74 @;

6643              put P_75 @;

6644              put P_76 @;

6645              put P_77 @;

6646              put P_78 @;

6647              put P_79 @;

6648              put P_80 @;

6649              put P_81 @;

6650              put P_82 @;

6651              put P_83 @;

6652              put P_84 @;

6653              put P_85 @;

6654              put P_86 @;

6655              put P_87 @;

6656              put P_88 @;

6657              put P_89 @;

6658              put P_90 @;

6659              put P_91 @;

6660              put P_92 @;

6661              put P_93 @;

6662              put P_94 @;

6663              put P_95 @;

6664              put P_96 @;

6665              put P_97 @;

6666              put P_98 @;

6667              put P_99 ;

6668              ;

6669            end;

6670           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

6671           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

6672           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_DF.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_DF.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:25:21,

      Create Time=21Nov2008:16:25:21

NOTE: 2 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_DF.csv'.

      The minimum record length was 499.

      The maximum record length was 1314.

NOTE: There were 1 observations read from the data set TEMP4.HIGH_DF.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

1 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_DF.csv from TEMP4.HIGH_DF.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_DF.csv" file was successfully created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.07 seconds

      cpu time            0.07 seconds

736                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: Deleting WORK.D10 (memtype=DATA).

NOTE: Deleting WORK.D11 (memtype=DATA).

NOTE: Deleting WORK.D2 (memtype=DATA).

NOTE: Deleting WORK.D3 (memtype=DATA).

NOTE: Deleting WORK.D4 (memtype=DATA).

NOTE: Deleting WORK.D5 (memtype=DATA).

NOTE: Deleting WORK.D6 (memtype=DATA).

NOTE: Deleting WORK.D7 (memtype=DATA).

NOTE: Deleting WORK.D8 (memtype=DATA).

NOTE: Deleting WORK.D9 (memtype=DATA).

NOTE: Deleting WORK.X (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Copying TEMP3.HIGHCOMM3 to WORK.HIGHCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHCOMM3.

NOTE: The data set WORK.HIGHCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHCRUISE3 to WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHCRUISE3.

NOTE: The data set WORK.HIGHCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFBARGE3 to WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFBARGE3.

NOTE: The data set WORK.HIGHFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFSHIPS3 to WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFSHIPS3.

NOTE: The data set WORK.HIGHFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHPASS3 to WORK.HIGHPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHPASS3.

NOTE: The data set WORK.HIGHPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHREC3 to WORK.HIGHREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHREC3.

NOTE: The data set WORK.HIGHREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.HIGHTBARGE3 to WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTBARGE3.

NOTE: The data set WORK.HIGHTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHTSHIPS3 to WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTSHIPS3.

NOTE: The data set WORK.HIGHTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHUTILITY3 to WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHUTILITY3.

NOTE: The data set WORK.HIGHUTILITY3 has 11 observations and 1
variables.

NOTE: Copying TEMP3.LOWCOMM3 to WORK.LOWCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWCOMM3.

NOTE: The data set WORK.LOWCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWCRUISE3 to WORK.LOWCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWCRUISE3.

NOTE: The data set WORK.LOWCRUISE3 has 11 observations and 1 variables.

737                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Copying TEMP3.LOWFBARGE3 to WORK.LOWFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFBARGE3.

NOTE: The data set WORK.LOWFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFSHIPS3 to WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFSHIPS3.

NOTE: The data set WORK.LOWFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWPASS3 to WORK.LOWPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWPASS3.

NOTE: The data set WORK.LOWPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWREC3 to WORK.LOWREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWREC3.

NOTE: The data set WORK.LOWREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.LOWTBARGE3 to WORK.LOWTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTBARGE3.

NOTE: The data set WORK.LOWTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWTSHIPS3 to WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTSHIPS3.

NOTE: The data set WORK.LOWTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWUTILITY3 to WORK.LOWUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWUTILITY3.

NOTE: The data set WORK.LOWUTILITY3 has 11 observations and 1 variables.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting TEMP.HIGHOUTDATA_DF (memtype=DATA).

NOTE: Deleting TEMP.HIGH_DF (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table TEMP.HIGH_FF created, with 11 rows and 2 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D1 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D1A (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

738                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The file WORK.D1B (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D7 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D2 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D6 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D3 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D9 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D10 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D4 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

739                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The file WORK.D8 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D5 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.HIGHCOMM3 (memtype=DATA).

NOTE: Deleting WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHPASS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHREC3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.LOWCOMM3 (memtype=DATA).

NOTE: Deleting WORK.LOWCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWPASS3 (memtype=DATA).

NOTE: Deleting WORK.LOWREC3 (memtype=DATA).

NOTE: Deleting WORK.LOWTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWUTILITY3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.LARGE2 created, with 11 rows and 11 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Variable cs_cost is uninitialized.

NOTE: Variable fb_cost is uninitialized.

NOTE: Variable fs_cost is uninitialized.

NOTE: Variable pv_cost is uninitialized.

NOTE: Variable rs_cost is uninitialized.

NOTE: Variable tb_cost is uninitialized.

NOTE: Variable ts_cost is uninitialized.

NOTE: Variable ut_cost is uninitialized.

740                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      11 at 6672:140   11 at 6672:188   11 at 6672:212   11 at 6672:236 
 11 at 6672:16    11 at 6672:40    11 at 6672:64

      11 at 6672:88    

NOTE: There were 11 observations read from the data set WORK.LARGE2.

NOTE: The data set WORK.LARGE3 has 11 observations and 20 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.LARGE2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.LARGE3A created, with 11 rows and 31 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE3A.

NOTE: The data set WORK.LARGE3B has 11 observations and 43 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE3A (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.03 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.LARGE4 created, with 11 rows and 34 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

741                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set TEMP4.LARGE4 has 11 observations and 34 variables.

NOTE: DATA statement used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.LARGE3B (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L1 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L2 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L3 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L4 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L5 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

742                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L6 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L7 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L8 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L9 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L10 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L11 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.L1.

NOTE: There were 11 observations read from the data set WORK.L2.

NOTE: There were 11 observations read from the data set WORK.L3.

NOTE: There were 11 observations read from the data set WORK.L4.

NOTE: There were 11 observations read from the data set WORK.L5.

743                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set WORK.L6.

NOTE: There were 11 observations read from the data set WORK.L7.

NOTE: There were 11 observations read from the data set WORK.L8.

NOTE: There were 11 observations read from the data set WORK.L9.

NOTE: There were 11 observations read from the data set WORK.L10.

NOTE: There were 11 observations read from the data set WORK.L11.

NOTE: The data set WORK.L has 121 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.L1 (memtype=DATA).

NOTE: Deleting WORK.L2 (memtype=DATA).

NOTE: Deleting WORK.L3 (memtype=DATA).

NOTE: Deleting WORK.L4 (memtype=DATA).

NOTE: Deleting WORK.L5 (memtype=DATA).

NOTE: Deleting WORK.L6 (memtype=DATA).

NOTE: Deleting WORK.L7 (memtype=DATA).

NOTE: Deleting WORK.L8 (memtype=DATA).

NOTE: Deleting WORK.L9 (memtype=DATA).

NOTE: Deleting WORK.L10 (memtype=DATA).

NOTE: Deleting WORK.L11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 121 observations read from the data set WORK.L.

NOTE: The data set WORK.L has 121 observations and 2 variables.

NOTE: PROCEDURE SORT used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The data set TEMP4.HIGH_FF has 1 observations and 102 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.L (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.LARGE5 has 11 observations and 46 variables.

NOTE: DATA statement used (Total process time):

744                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D1 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D2 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D3 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D4 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

745                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Table WORK.D5 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D6 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D7 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D8 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D9 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D10 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

746                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D11 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.LARGE5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 2 observations read from the data set WORK.D1.

NOTE: There were 1 observations read from the data set WORK.D2.

NOTE: There were 1 observations read from the data set WORK.D3.

NOTE: There were 1 observations read from the data set WORK.D4.

NOTE: There were 1 observations read from the data set WORK.D5.

NOTE: There were 1 observations read from the data set WORK.D6.

NOTE: There were 1 observations read from the data set WORK.D7.

NOTE: There were 1 observations read from the data set WORK.D8.

NOTE: There were 1 observations read from the data set WORK.D9.

NOTE: There were 1 observations read from the data set WORK.D10.

NOTE: There were 1 observations read from the data set WORK.D11.

NOTE: The data set TEMP.HIGHOUTDATA_FF has 2 observations and 13
variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

6673       
/**********************************************************************

6674        *   PRODUCT:   SAS

6675        *   VERSION:   9.2

6676        *   CREATOR:   External File Interface

6677        *   DATE:      21NOV08

6678        *   DESC:      Generated SAS Datastep Code

6679        *   TEMPLATE SOURCE:  (None Specified.)

6680       
***********************************************************************/

6681           data _null_;

6682           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

6683           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

6684           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_FF.csv' delimiter=',' DSD

6684     ! DROPOVER lrecl=32767;

6685           if _n_ = 1 then        /* write column names or labels */

6686            do;

747                                                        The SAS
System                            15:50 Friday, November 21, 2008

6687              put

6688                 "NAICS"

6689              ','

6690                 "D"

6691              ','

6692                 "percent1"

6693              ','

6694                 "percent2"

6695              ','

6696                 "percent3"

6697              ','

6698                 "percent4"

6699              ','

6700                 "percent5"

6701              ','

6702                 "percent6"

6703              ','

6704                 "percent7"

6705              ','

6706                 "percent8"

6707              ','

6708                 "percent9"

6709              ','

6710                 "percent10"

6711              ','

6712                 "percent11"

6713              ;

6714            end;

6715          set  TEMP.HIGHOUTDATA_FF   end=EFIEOD;

6716              format NAICS $16. ;

6717              format D best12. ;

6718              format percent1 percent8.2 ;

6719              format percent2 percent8.2 ;

6720              format percent3 percent8.2 ;

6721              format percent4 percent8.2 ;

6722              format percent5 percent8.2 ;

6723              format percent6 percent8.2 ;

6724              format percent7 percent8.2 ;

6725              format percent8 percent8.2 ;

6726              format percent9 percent8.2 ;

6727              format percent10 percent8.2 ;

6728              format percent11 percent8.2 ;

6729            do;

6730              EFIOUT + 1;

6731              put NAICS $ @;

6732              put D @;

6733              put percent1 @;

6734              put percent2 @;

6735              put percent3 @;

6736              put percent4 @;

6737              put percent5 @;

6738              put percent6 @;

6739              put percent7 @;

6740              put percent8 @;

748                                                        The SAS
System                            15:50 Friday, November 21, 2008

6741              put percent9 @;

6742              put percent10 @;

6743              put percent11 ;

6744              ;

6745            end;

6746           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

6747           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

6748           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_FF.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_FF.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:25:21,

      Create Time=21Nov2008:16:25:21

NOTE: 3 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_FF.csv'.

      The minimum record length was 23.

      The maximum record length was 108.

NOTE: There were 2 observations read from the data set
TEMP.HIGHOUTDATA_FF.

NOTE: At least one W.D format was too small for the number to be
printed. The decimal may be shifted by the "BEST" format.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

2 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_FF.csv from TEMP.HIGHOUTDATA_FF.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_FF.csv" file was successfully
created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.06 seconds

      cpu time            0.03 seconds

      

6749       
/**********************************************************************

6750        *   PRODUCT:   SAS

6751        *   VERSION:   9.2

6752        *   CREATOR:   External File Interface

6753        *   DATE:      21NOV08

6754        *   DESC:      Generated SAS Datastep Code

6755        *   TEMPLATE SOURCE:  (None Specified.)

6756       
***********************************************************************/

6757           data _null_;

6758           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

6759           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

6760           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_FF.csv' delimiter=',' DSD DROPOVER

6760     ! lrecl=32767;

6761           if _n_ = 1 then        /* write column names or labels */

6762            do;

6763              put

6764                 "P_A"

6765              ','

6766                 "P_100"

749                                                        The SAS
System                            15:50 Friday, November 21, 2008

6767              ','

6768                 "P_0"

6769              ','

6770                 "P_1"

6771              ','

6772                 "P_2"

6773              ','

6774                 "P_3"

6775              ','

6776                 "P_4"

6777              ','

6778                 "P_5"

6779              ','

6780                 "P_6"

6781              ','

6782                 "P_7"

6783              ','

6784                 "P_8"

6785              ','

6786                 "P_9"

6787              ','

6788                 "P_10"

6789              ','

6790                 "P_11"

6791              ','

6792                 "P_12"

6793              ','

6794                 "P_13"

6795              ','

6796                 "P_14"

6797              ','

6798                 "P_15"

6799              ','

6800                 "P_16"

6801              ','

6802                 "P_17"

6803              ','

6804                 "P_18"

6805              ','

6806                 "P_19"

6807              ','

6808                 "P_20"

6809              ','

6810                 "P_21"

6811              ','

6812                 "P_22"

6813              ','

6814                 "P_23"

6815              ','

6816                 "P_24"

6817              ','

6818                 "P_25"

6819              ','

6820                 "P_26"

750                                                        The SAS
System                            15:50 Friday, November 21, 2008

6821              ','

6822                 "P_27"

6823              ','

6824                 "P_28"

6825              ','

6826                 "P_29"

6827              ','

6828                 "P_30"

6829              ','

6830                 "P_31"

6831              ','

6832                 "P_32"

6833              ','

6834                 "P_33"

6835              ','

6836                 "P_34"

6837              ','

6838                 "P_35"

6839              ','

6840                 "P_36"

6841              ','

6842                 "P_37"

6843              ','

6844                 "P_38"

6845              ','

6846                 "P_39"

6847              ','

6848                 "P_40"

6849              ','

6850                 "P_41"

6851              ','

6852                 "P_42"

6853              ','

6854                 "P_43"

6855              ','

6856                 "P_44"

6857              ','

6858                 "P_45"

6859              ','

6860                 "P_46"

6861              ','

6862                 "P_47"

6863              ','

6864                 "P_48"

6865              ','

6866                 "P_49"

6867              ','

6868                 "P_50"

6869              ','

6870                 "P_51"

6871              ','

6872                 "P_52"

6873              ','

6874                 "P_53"

751                                                        The SAS
System                            15:50 Friday, November 21, 2008

6875              ','

6876                 "P_54"

6877              ','

6878                 "P_55"

6879              ','

6880                 "P_56"

6881              ','

6882                 "P_57"

6883              ','

6884                 "P_58"

6885              ','

6886                 "P_59"

6887              ','

6888                 "P_60"

6889              ','

6890                 "P_61"

6891              ','

6892                 "P_62"

6893              ','

6894                 "P_63"

6895              ','

6896                 "P_64"

6897              ','

6898                 "P_65"

6899              ','

6900                 "P_66"

6901              ','

6902                 "P_67"

6903              ','

6904                 "P_68"

6905              ','

6906                 "P_69"

6907              ','

6908                 "P_70"

6909              ','

6910                 "P_71"

6911              ','

6912                 "P_72"

6913              ','

6914                 "P_73"

6915              ','

6916                 "P_74"

6917              ','

6918                 "P_75"

6919              ','

6920                 "P_76"

6921              ','

6922                 "P_77"

6923              ','

6924                 "P_78"

6925              ','

6926                 "P_79"

6927              ','

6928                 "P_80"

752                                                        The SAS
System                            15:50 Friday, November 21, 2008

6929              ','

6930                 "P_81"

6931              ','

6932                 "P_82"

6933              ','

6934                 "P_83"

6935              ','

6936                 "P_84"

6937              ','

6938                 "P_85"

6939              ','

6940                 "P_86"

6941              ','

6942                 "P_87"

6943              ','

6944                 "P_88"

6945              ','

6946                 "P_89"

6947              ','

6948                 "P_90"

6949              ','

6950                 "P_91"

6951              ','

6952                 "P_92"

6953              ','

6954                 "P_93"

6955              ','

6956                 "P_94"

6957              ','

6958                 "P_95"

6959              ','

6960                 "P_96"

6961              ','

6962                 "P_97"

6963              ','

6964                 "P_98"

6965              ','

6966                 "P_99"

6967              ;

6968            end;

6969          set  TEMP4.HIGH_FF   end=EFIEOD;

6970              format P_A best12. ;

6971              format P_100 best12. ;

6972              format P_0 best12. ;

6973              format P_1 best12. ;

6974              format P_2 best12. ;

6975              format P_3 best12. ;

6976              format P_4 best12. ;

6977              format P_5 best12. ;

6978              format P_6 best12. ;

6979              format P_7 best12. ;

6980              format P_8 best12. ;

6981              format P_9 best12. ;

6982              format P_10 best12. ;

753                                                        The SAS
System                            15:50 Friday, November 21, 2008

6983              format P_11 best12. ;

6984              format P_12 best12. ;

6985              format P_13 best12. ;

6986              format P_14 best12. ;

6987              format P_15 best12. ;

6988              format P_16 best12. ;

6989              format P_17 best12. ;

6990              format P_18 best12. ;

6991              format P_19 best12. ;

6992              format P_20 best12. ;

6993              format P_21 best12. ;

6994              format P_22 best12. ;

6995              format P_23 best12. ;

6996              format P_24 best12. ;

6997              format P_25 best12. ;

6998              format P_26 best12. ;

6999              format P_27 best12. ;

7000              format P_28 best12. ;

7001              format P_29 best12. ;

7002              format P_30 best12. ;

7003              format P_31 best12. ;

7004              format P_32 best12. ;

7005              format P_33 best12. ;

7006              format P_34 best12. ;

7007              format P_35 best12. ;

7008              format P_36 best12. ;

7009              format P_37 best12. ;

7010              format P_38 best12. ;

7011              format P_39 best12. ;

7012              format P_40 best12. ;

7013              format P_41 best12. ;

7014              format P_42 best12. ;

7015              format P_43 best12. ;

7016              format P_44 best12. ;

7017              format P_45 best12. ;

7018              format P_46 best12. ;

7019              format P_47 best12. ;

7020              format P_48 best12. ;

7021              format P_49 best12. ;

7022              format P_50 best12. ;

7023              format P_51 best12. ;

7024              format P_52 best12. ;

7025              format P_53 best12. ;

7026              format P_54 best12. ;

7027              format P_55 best12. ;

7028              format P_56 best12. ;

7029              format P_57 best12. ;

7030              format P_58 best12. ;

7031              format P_59 best12. ;

7032              format P_60 best12. ;

7033              format P_61 best12. ;

7034              format P_62 best12. ;

7035              format P_63 best12. ;

7036              format P_64 best12. ;

754                                                        The SAS
System                            15:50 Friday, November 21, 2008

7037              format P_65 best12. ;

7038              format P_66 best12. ;

7039              format P_67 best12. ;

7040              format P_68 best12. ;

7041              format P_69 best12. ;

7042              format P_70 best12. ;

7043              format P_71 best12. ;

7044              format P_72 best12. ;

7045              format P_73 best12. ;

7046              format P_74 best12. ;

7047              format P_75 best12. ;

7048              format P_76 best12. ;

7049              format P_77 best12. ;

7050              format P_78 best12. ;

7051              format P_79 best12. ;

7052              format P_80 best12. ;

7053              format P_81 best12. ;

7054              format P_82 best12. ;

7055              format P_83 best12. ;

7056              format P_84 best12. ;

7057              format P_85 best12. ;

7058              format P_86 best12. ;

7059              format P_87 best12. ;

7060              format P_88 best12. ;

7061              format P_89 best12. ;

7062              format P_90 best12. ;

7063              format P_91 best12. ;

7064              format P_92 best12. ;

7065              format P_93 best12. ;

7066              format P_94 best12. ;

7067              format P_95 best12. ;

7068              format P_96 best12. ;

7069              format P_97 best12. ;

7070              format P_98 best12. ;

7071              format P_99 best12. ;

7072            do;

7073              EFIOUT + 1;

7074              put P_A @;

7075              put P_100 @;

7076              put P_0 @;

7077              put P_1 @;

7078              put P_2 @;

7079              put P_3 @;

7080              put P_4 @;

7081              put P_5 @;

7082              put P_6 @;

7083              put P_7 @;

7084              put P_8 @;

7085              put P_9 @;

7086              put P_10 @;

7087              put P_11 @;

7088              put P_12 @;

7089              put P_13 @;

7090              put P_14 @;

755                                                        The SAS
System                            15:50 Friday, November 21, 2008

7091              put P_15 @;

7092              put P_16 @;

7093              put P_17 @;

7094              put P_18 @;

7095              put P_19 @;

7096              put P_20 @;

7097              put P_21 @;

7098              put P_22 @;

7099              put P_23 @;

7100              put P_24 @;

7101              put P_25 @;

7102              put P_26 @;

7103              put P_27 @;

7104              put P_28 @;

7105              put P_29 @;

7106              put P_30 @;

7107              put P_31 @;

7108              put P_32 @;

7109              put P_33 @;

7110              put P_34 @;

7111              put P_35 @;

7112              put P_36 @;

7113              put P_37 @;

7114              put P_38 @;

7115              put P_39 @;

7116              put P_40 @;

7117              put P_41 @;

7118              put P_42 @;

7119              put P_43 @;

7120              put P_44 @;

7121              put P_45 @;

7122              put P_46 @;

7123              put P_47 @;

7124              put P_48 @;

7125              put P_49 @;

7126              put P_50 @;

7127              put P_51 @;

7128              put P_52 @;

7129              put P_53 @;

7130              put P_54 @;

7131              put P_55 @;

7132              put P_56 @;

7133              put P_57 @;

7134              put P_58 @;

7135              put P_59 @;

7136              put P_60 @;

7137              put P_61 @;

7138              put P_62 @;

7139              put P_63 @;

7140              put P_64 @;

7141              put P_65 @;

7142              put P_66 @;

7143              put P_67 @;

7144              put P_68 @;

756                                                        The SAS
System                            15:50 Friday, November 21, 2008

7145              put P_69 @;

7146              put P_70 @;

7147              put P_71 @;

7148              put P_72 @;

7149              put P_73 @;

7150              put P_74 @;

7151              put P_75 @;

7152              put P_76 @;

7153              put P_77 @;

7154              put P_78 @;

7155              put P_79 @;

7156              put P_80 @;

7157              put P_81 @;

7158              put P_82 @;

7159              put P_83 @;

7160              put P_84 @;

7161              put P_85 @;

7162              put P_86 @;

7163              put P_87 @;

7164              put P_88 @;

7165              put P_89 @;

7166              put P_90 @;

7167              put P_91 @;

7168              put P_92 @;

7169              put P_93 @;

7170              put P_94 @;

7171              put P_95 @;

7172              put P_96 @;

7173              put P_97 @;

7174              put P_98 @;

7175              put P_99 ;

7176              ;

7177            end;

7178           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

7179           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

7180           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_FF.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_FF.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:25:21,

      Create Time=21Nov2008:16:25:21

NOTE: 2 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_FF.csv'.

      The minimum record length was 323.

      The maximum record length was 499.

NOTE: There were 1 observations read from the data set TEMP4.HIGH_FF.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

1 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_FF.csv from TEMP4.HIGH_FF.

  

757                                                        The SAS
System                            15:50 Friday, November 21, 2008

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_FF.csv" file was successfully created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: Deleting WORK.D10 (memtype=DATA).

NOTE: Deleting WORK.D11 (memtype=DATA).

NOTE: Deleting WORK.D2 (memtype=DATA).

NOTE: Deleting WORK.D3 (memtype=DATA).

NOTE: Deleting WORK.D4 (memtype=DATA).

NOTE: Deleting WORK.D5 (memtype=DATA).

NOTE: Deleting WORK.D6 (memtype=DATA).

NOTE: Deleting WORK.D7 (memtype=DATA).

NOTE: Deleting WORK.D8 (memtype=DATA).

NOTE: Deleting WORK.D9 (memtype=DATA).

NOTE: Deleting WORK.X (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Copying TEMP3.HIGHCOMM3 to WORK.HIGHCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHCOMM3.

NOTE: The data set WORK.HIGHCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHCRUISE3 to WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHCRUISE3.

NOTE: The data set WORK.HIGHCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFBARGE3 to WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFBARGE3.

NOTE: The data set WORK.HIGHFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFSHIPS3 to WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFSHIPS3.

NOTE: The data set WORK.HIGHFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHPASS3 to WORK.HIGHPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHPASS3.

NOTE: The data set WORK.HIGHPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHREC3 to WORK.HIGHREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHREC3.

NOTE: The data set WORK.HIGHREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.HIGHTBARGE3 to WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTBARGE3.

NOTE: The data set WORK.HIGHTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHTSHIPS3 to WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTSHIPS3.

NOTE: The data set WORK.HIGHTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHUTILITY3 to WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHUTILITY3.

NOTE: The data set WORK.HIGHUTILITY3 has 11 observations and 1
variables.

NOTE: Copying TEMP3.LOWCOMM3 to WORK.LOWCOMM3 (memtype=DATA).

758                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set TEMP3.LOWCOMM3.

NOTE: The data set WORK.LOWCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWCRUISE3 to WORK.LOWCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWCRUISE3.

NOTE: The data set WORK.LOWCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFBARGE3 to WORK.LOWFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFBARGE3.

NOTE: The data set WORK.LOWFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFSHIPS3 to WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFSHIPS3.

NOTE: The data set WORK.LOWFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWPASS3 to WORK.LOWPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWPASS3.

NOTE: The data set WORK.LOWPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWREC3 to WORK.LOWREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWREC3.

NOTE: The data set WORK.LOWREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.LOWTBARGE3 to WORK.LOWTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTBARGE3.

NOTE: The data set WORK.LOWTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWTSHIPS3 to WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTSHIPS3.

NOTE: The data set WORK.LOWTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWUTILITY3 to WORK.LOWUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWUTILITY3.

NOTE: The data set WORK.LOWUTILITY3 has 11 observations and 1 variables.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting TEMP.HIGHOUTDATA_FF (memtype=DATA).

NOTE: Deleting TEMP.HIGH_FF (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.N (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: The file WORK.D1 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

759                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A1 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D1.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 11 observations read from the data set WORK.A1.

NOTE: The data set WORK.D1 has 11 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A2 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A2.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 22 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

760                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A3 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A3.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 33 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A4 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

761                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A4.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 44 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A5 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A5 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A5.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 55 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

762                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A6 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A6.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 66 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A7 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D1.

763                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set WORK.A7.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 77 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A8 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A8 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A8.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 88 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

764                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A9 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A9.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 99 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A10 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A10.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 110 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

765                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A11 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A11.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 121 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D7 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHCRUISE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

766                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A1 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D7.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 121 observations read from the data set WORK.A1.

NOTE: The data set WORK.D7 has 121 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHCRUISE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A2 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D7.

NOTE: There were 121 observations read from the data set WORK.A2.

NOTE: 121 observations added.

NOTE: The data set WORK.D7 has 242 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

767                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHCRUISE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A3 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D7.

NOTE: There were 121 observations read from the data set WORK.A3.

NOTE: 121 observations added.

NOTE: The data set WORK.D7 has 363 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHCRUISE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

768                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A4 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D7.

NOTE: There were 121 observations read from the data set WORK.A4.

NOTE: 121 observations added.

NOTE: The data set WORK.D7 has 484 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHCRUISE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A5 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D7.

NOTE: There were 121 observations read from the data set WORK.A5.

NOTE: 121 observations added.

NOTE: The data set WORK.D7 has 605 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

769                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHCRUISE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A6 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D7.

NOTE: There were 121 observations read from the data set WORK.A6.

NOTE: 121 observations added.

NOTE: The data set WORK.D7 has 726 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHCRUISE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A7 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

770                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Appending WORK.A7 to WORK.D7.

NOTE: There were 121 observations read from the data set WORK.A7.

NOTE: 121 observations added.

NOTE: The data set WORK.D7 has 847 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHCRUISE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A8 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D7.

NOTE: There were 121 observations read from the data set WORK.A8.

NOTE: 121 observations added.

NOTE: The data set WORK.D7 has 968 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

771                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set
WORK.HIGHCRUISE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A9 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D7.

NOTE: There were 121 observations read from the data set WORK.A9.

NOTE: 121 observations added.

NOTE: The data set WORK.D7 has 1089 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHCRUISE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A10 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D7.

NOTE: There were 121 observations read from the data set WORK.A10.

NOTE: 121 observations added.

772                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.D7 has 1210 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHCRUISE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A11 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D7.

NOTE: There were 121 observations read from the data set WORK.A11.

NOTE: 121 observations added.

NOTE: The data set WORK.D7 has 1331 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

773                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The file WORK.D1A (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D1B (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1331 observations read from the data set WORK.D7.

NOTE: The data set TEMP.HIGH_DP has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D2 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D6 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D3 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D9 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

774                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The file WORK.D10 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D4 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D8 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D5 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.HIGHCOMM3 (memtype=DATA).

NOTE: Deleting WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHPASS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHREC3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.LOWCOMM3 (memtype=DATA).

NOTE: Deleting WORK.LOWCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWPASS3 (memtype=DATA).

NOTE: Deleting WORK.LOWREC3 (memtype=DATA).

NOTE: Deleting WORK.LOWTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.LARGE2 created, with 1331 rows and 13 columns.

775                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Variable cf_cost is uninitialized.

NOTE: Variable fb_cost is uninitialized.

NOTE: Variable fs_cost is uninitialized.

NOTE: Variable rs_cost is uninitialized.

NOTE: Variable tb_cost is uninitialized.

NOTE: Variable ts_cost is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1331 at 7180:164   1331 at 7180:188   1331 at 7180:212   1331 at
7180:16    1331 at 7180:40    1331 at 7180:64

NOTE: There were 1331 observations read from the data set WORK.LARGE2.

NOTE: The data set WORK.LARGE3 has 1331 observations and 20 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.LARGE3A created, with 1331 rows and 31 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.LARGE3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1331 observations read from the data set WORK.LARGE3A.

NOTE: The data set WORK.LARGE3B has 1331 observations and 43 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE3A (memtype=DATA).

776                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.LARGE4 created, with 1331 rows and 34 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1331 observations read from the data set WORK.LARGE4.

NOTE: The data set TEMP4.LARGE4 has 1331 observations and 34 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE3B (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1331 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L1 has 1331 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1331 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L2 has 1331 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1331 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L3 has 1331 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1331 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L4 has 1331 observations and 2 variables.

777                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1331 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L5 has 1331 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1331 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L6 has 1331 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1331 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L7 has 1331 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1331 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L8 has 1331 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1331 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L9 has 1331 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1331 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L10 has 1331 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

778                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1331 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L11 has 1331 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1331 observations read from the data set WORK.L1.

NOTE: There were 1331 observations read from the data set WORK.L2.

NOTE: There were 1331 observations read from the data set WORK.L3.

NOTE: There were 1331 observations read from the data set WORK.L4.

NOTE: There were 1331 observations read from the data set WORK.L5.

NOTE: There were 1331 observations read from the data set WORK.L6.

NOTE: There were 1331 observations read from the data set WORK.L7.

NOTE: There were 1331 observations read from the data set WORK.L8.

NOTE: There were 1331 observations read from the data set WORK.L9.

NOTE: There were 1331 observations read from the data set WORK.L10.

NOTE: There were 1331 observations read from the data set WORK.L11.

NOTE: The data set WORK.L has 14641 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.L1 (memtype=DATA).

NOTE: Deleting WORK.L2 (memtype=DATA).

NOTE: Deleting WORK.L3 (memtype=DATA).

NOTE: Deleting WORK.L4 (memtype=DATA).

NOTE: Deleting WORK.L5 (memtype=DATA).

NOTE: Deleting WORK.L6 (memtype=DATA).

NOTE: Deleting WORK.L7 (memtype=DATA).

NOTE: Deleting WORK.L8 (memtype=DATA).

NOTE: Deleting WORK.L9 (memtype=DATA).

NOTE: Deleting WORK.L10 (memtype=DATA).

NOTE: Deleting WORK.L11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 14641 observations read from the data set WORK.L.

NOTE: The data set WORK.L has 14641 observations and 2 variables.

NOTE: PROCEDURE SORT used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The data set TEMP4.HIGH_DP has 1 observations and 102 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

779                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.L (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1331 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.LARGE5 has 1331 observations and 46 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.X created, with 3 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D1 created, with 3 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D2 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D3 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

780                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D4 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D5 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D6 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D7 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D8 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D9 created, with 1 rows and 3 columns.

781                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D10 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D11 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.LARGE5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 3 observations read from the data set WORK.D1.

NOTE: There were 2 observations read from the data set WORK.D2.

NOTE: There were 2 observations read from the data set WORK.D3.

NOTE: There were 1 observations read from the data set WORK.D4.

NOTE: There were 1 observations read from the data set WORK.D5.

NOTE: There were 1 observations read from the data set WORK.D6.

NOTE: There were 1 observations read from the data set WORK.D7.

NOTE: There were 1 observations read from the data set WORK.D8.

NOTE: There were 1 observations read from the data set WORK.D9.

NOTE: There were 1 observations read from the data set WORK.D10.

NOTE: There were 1 observations read from the data set WORK.D11.

NOTE: The data set TEMP.HIGHOUTDATA_DP has 3 observations and 13
variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

7181       
/**********************************************************************

7182        *   PRODUCT:   SAS

7183        *   VERSION:   9.2

782                                                        The SAS
System                            15:50 Friday, November 21, 2008

7184        *   CREATOR:   External File Interface

7185        *   DATE:      21NOV08

7186        *   DESC:      Generated SAS Datastep Code

7187        *   TEMPLATE SOURCE:  (None Specified.)

7188       
***********************************************************************/

7189           data _null_;

7190           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

7191           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

7192           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_DP.csv' delimiter=',' DSD

7192     ! DROPOVER lrecl=32767;

7193           if _n_ = 1 then        /* write column names or labels */

7194            do;

7195              put

7196                 "NAICS"

7197              ','

7198                 "D"

7199              ','

7200                 "percent1"

7201              ','

7202                 "percent2"

7203              ','

7204                 "percent3"

7205              ','

7206                 "percent4"

7207              ','

7208                 "percent5"

7209              ','

7210                 "percent6"

7211              ','

7212                 "percent7"

7213              ','

7214                 "percent8"

7215              ','

7216                 "percent9"

7217              ','

7218                 "percent10"

7219              ','

7220                 "percent11"

7221              ;

7222            end;

7223          set  TEMP.HIGHOUTDATA_DP   end=EFIEOD;

7224              format NAICS $16. ;

7225              format D best12. ;

7226              format percent1 percent8.2 ;

7227              format percent2 percent8.2 ;

7228              format percent3 percent8.2 ;

7229              format percent4 percent8.2 ;

7230              format percent5 percent8.2 ;

7231              format percent6 percent8.2 ;

7232              format percent7 percent8.2 ;

7233              format percent8 percent8.2 ;

7234              format percent9 percent8.2 ;

7235              format percent10 percent8.2 ;

7236              format percent11 percent8.2 ;

783                                                        The SAS
System                            15:50 Friday, November 21, 2008

7237            do;

7238              EFIOUT + 1;

7239              put NAICS $ @;

7240              put D @;

7241              put percent1 @;

7242              put percent2 @;

7243              put percent3 @;

7244              put percent4 @;

7245              put percent5 @;

7246              put percent6 @;

7247              put percent7 @;

7248              put percent8 @;

7249              put percent9 @;

7250              put percent10 @;

7251              put percent11 ;

7252              ;

7253            end;

7254           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

7255           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

7256           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_DP.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_DP.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:25:22,

      Create Time=21Nov2008:16:25:22

NOTE: 4 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_DP.csv'.

      The minimum record length was 31.

      The maximum record length was 108.

NOTE: There were 3 observations read from the data set
TEMP.HIGHOUTDATA_DP.

NOTE: At least one W.D format was too small for the number to be
printed. The decimal may be shifted by the "BEST" format.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.00 seconds

      

3 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_DP.csv from TEMP.HIGHOUTDATA_DP.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_DP.csv" file was successfully
created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.09 seconds

      cpu time            0.03 seconds

      

7257       
/**********************************************************************

7258        *   PRODUCT:   SAS

7259        *   VERSION:   9.2

7260        *   CREATOR:   External File Interface

7261        *   DATE:      21NOV08

7262        *   DESC:      Generated SAS Datastep Code

7263        *   TEMPLATE SOURCE:  (None Specified.)

784                                                        The SAS
System                            15:50 Friday, November 21, 2008

7264       
***********************************************************************/

7265           data _null_;

7266           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

7267           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

7268           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_DP.csv' delimiter=',' DSD DROPOVER

7268     ! lrecl=32767;

7269           if _n_ = 1 then        /* write column names or labels */

7270            do;

7271              put

7272                 "P_A"

7273              ','

7274                 "P_100"

7275              ','

7276                 "P_0"

7277              ','

7278                 "P_1"

7279              ','

7280                 "P_2"

7281              ','

7282                 "P_3"

7283              ','

7284                 "P_4"

7285              ','

7286                 "P_5"

7287              ','

7288                 "P_6"

7289              ','

7290                 "P_7"

7291              ','

7292                 "P_8"

7293              ','

7294                 "P_9"

7295              ','

7296                 "P_10"

7297              ','

7298                 "P_11"

7299              ','

7300                 "P_12"

7301              ','

7302                 "P_13"

7303              ','

7304                 "P_14"

7305              ','

7306                 "P_15"

7307              ','

7308                 "P_16"

7309              ','

7310                 "P_17"

7311              ','

7312                 "P_18"

7313              ','

7314                 "P_19"

7315              ','

7316                 "P_20"

785                                                        The SAS
System                            15:50 Friday, November 21, 2008

7317              ','

7318                 "P_21"

7319              ','

7320                 "P_22"

7321              ','

7322                 "P_23"

7323              ','

7324                 "P_24"

7325              ','

7326                 "P_25"

7327              ','

7328                 "P_26"

7329              ','

7330                 "P_27"

7331              ','

7332                 "P_28"

7333              ','

7334                 "P_29"

7335              ','

7336                 "P_30"

7337              ','

7338                 "P_31"

7339              ','

7340                 "P_32"

7341              ','

7342                 "P_33"

7343              ','

7344                 "P_34"

7345              ','

7346                 "P_35"

7347              ','

7348                 "P_36"

7349              ','

7350                 "P_37"

7351              ','

7352                 "P_38"

7353              ','

7354                 "P_39"

7355              ','

7356                 "P_40"

7357              ','

7358                 "P_41"

7359              ','

7360                 "P_42"

7361              ','

7362                 "P_43"

7363              ','

7364                 "P_44"

7365              ','

7366                 "P_45"

7367              ','

7368                 "P_46"

7369              ','

7370                 "P_47"

786                                                        The SAS
System                            15:50 Friday, November 21, 2008

7371              ','

7372                 "P_48"

7373              ','

7374                 "P_49"

7375              ','

7376                 "P_50"

7377              ','

7378                 "P_51"

7379              ','

7380                 "P_52"

7381              ','

7382                 "P_53"

7383              ','

7384                 "P_54"

7385              ','

7386                 "P_55"

7387              ','

7388                 "P_56"

7389              ','

7390                 "P_57"

7391              ','

7392                 "P_58"

7393              ','

7394                 "P_59"

7395              ','

7396                 "P_60"

7397              ','

7398                 "P_61"

7399              ','

7400                 "P_62"

7401              ','

7402                 "P_63"

7403              ','

7404                 "P_64"

7405              ','

7406                 "P_65"

7407              ','

7408                 "P_66"

7409              ','

7410                 "P_67"

7411              ','

7412                 "P_68"

7413              ','

7414                 "P_69"

7415              ','

7416                 "P_70"

7417              ','

7418                 "P_71"

7419              ','

7420                 "P_72"

7421              ','

7422                 "P_73"

7423              ','

7424                 "P_74"

787                                                        The SAS
System                            15:50 Friday, November 21, 2008

7425              ','

7426                 "P_75"

7427              ','

7428                 "P_76"

7429              ','

7430                 "P_77"

7431              ','

7432                 "P_78"

7433              ','

7434                 "P_79"

7435              ','

7436                 "P_80"

7437              ','

7438                 "P_81"

7439              ','

7440                 "P_82"

7441              ','

7442                 "P_83"

7443              ','

7444                 "P_84"

7445              ','

7446                 "P_85"

7447              ','

7448                 "P_86"

7449              ','

7450                 "P_87"

7451              ','

7452                 "P_88"

7453              ','

7454                 "P_89"

7455              ','

7456                 "P_90"

7457              ','

7458                 "P_91"

7459              ','

7460                 "P_92"

7461              ','

7462                 "P_93"

7463              ','

7464                 "P_94"

7465              ','

7466                 "P_95"

7467              ','

7468                 "P_96"

7469              ','

7470                 "P_97"

7471              ','

7472                 "P_98"

7473              ','

7474                 "P_99"

7475              ;

7476            end;

7477          set  TEMP4.HIGH_DP   end=EFIEOD;

7478              format P_A best12. ;

788                                                        The SAS
System                            15:50 Friday, November 21, 2008

7479              format P_100 best12. ;

7480              format P_0 best12. ;

7481              format P_1 best12. ;

7482              format P_2 best12. ;

7483              format P_3 best12. ;

7484              format P_4 best12. ;

7485              format P_5 best12. ;

7486              format P_6 best12. ;

7487              format P_7 best12. ;

7488              format P_8 best12. ;

7489              format P_9 best12. ;

7490              format P_10 best12. ;

7491              format P_11 best12. ;

7492              format P_12 best12. ;

7493              format P_13 best12. ;

7494              format P_14 best12. ;

7495              format P_15 best12. ;

7496              format P_16 best12. ;

7497              format P_17 best12. ;

7498              format P_18 best12. ;

7499              format P_19 best12. ;

7500              format P_20 best12. ;

7501              format P_21 best12. ;

7502              format P_22 best12. ;

7503              format P_23 best12. ;

7504              format P_24 best12. ;

7505              format P_25 best12. ;

7506              format P_26 best12. ;

7507              format P_27 best12. ;

7508              format P_28 best12. ;

7509              format P_29 best12. ;

7510              format P_30 best12. ;

7511              format P_31 best12. ;

7512              format P_32 best12. ;

7513              format P_33 best12. ;

7514              format P_34 best12. ;

7515              format P_35 best12. ;

7516              format P_36 best12. ;

7517              format P_37 best12. ;

7518              format P_38 best12. ;

7519              format P_39 best12. ;

7520              format P_40 best12. ;

7521              format P_41 best12. ;

7522              format P_42 best12. ;

7523              format P_43 best12. ;

7524              format P_44 best12. ;

7525              format P_45 best12. ;

7526              format P_46 best12. ;

7527              format P_47 best12. ;

7528              format P_48 best12. ;

7529              format P_49 best12. ;

7530              format P_50 best12. ;

7531              format P_51 best12. ;

7532              format P_52 best12. ;

789                                                        The SAS
System                            15:50 Friday, November 21, 2008

7533              format P_53 best12. ;

7534              format P_54 best12. ;

7535              format P_55 best12. ;

7536              format P_56 best12. ;

7537              format P_57 best12. ;

7538              format P_58 best12. ;

7539              format P_59 best12. ;

7540              format P_60 best12. ;

7541              format P_61 best12. ;

7542              format P_62 best12. ;

7543              format P_63 best12. ;

7544              format P_64 best12. ;

7545              format P_65 best12. ;

7546              format P_66 best12. ;

7547              format P_67 best12. ;

7548              format P_68 best12. ;

7549              format P_69 best12. ;

7550              format P_70 best12. ;

7551              format P_71 best12. ;

7552              format P_72 best12. ;

7553              format P_73 best12. ;

7554              format P_74 best12. ;

7555              format P_75 best12. ;

7556              format P_76 best12. ;

7557              format P_77 best12. ;

7558              format P_78 best12. ;

7559              format P_79 best12. ;

7560              format P_80 best12. ;

7561              format P_81 best12. ;

7562              format P_82 best12. ;

7563              format P_83 best12. ;

7564              format P_84 best12. ;

7565              format P_85 best12. ;

7566              format P_86 best12. ;

7567              format P_87 best12. ;

7568              format P_88 best12. ;

7569              format P_89 best12. ;

7570              format P_90 best12. ;

7571              format P_91 best12. ;

7572              format P_92 best12. ;

7573              format P_93 best12. ;

7574              format P_94 best12. ;

7575              format P_95 best12. ;

7576              format P_96 best12. ;

7577              format P_97 best12. ;

7578              format P_98 best12. ;

7579              format P_99 best12. ;

7580            do;

7581              EFIOUT + 1;

7582              put P_A @;

7583              put P_100 @;

7584              put P_0 @;

7585              put P_1 @;

7586              put P_2 @;

790                                                        The SAS
System                            15:50 Friday, November 21, 2008

7587              put P_3 @;

7588              put P_4 @;

7589              put P_5 @;

7590              put P_6 @;

7591              put P_7 @;

7592              put P_8 @;

7593              put P_9 @;

7594              put P_10 @;

7595              put P_11 @;

7596              put P_12 @;

7597              put P_13 @;

7598              put P_14 @;

7599              put P_15 @;

7600              put P_16 @;

7601              put P_17 @;

7602              put P_18 @;

7603              put P_19 @;

7604              put P_20 @;

7605              put P_21 @;

7606              put P_22 @;

7607              put P_23 @;

7608              put P_24 @;

7609              put P_25 @;

7610              put P_26 @;

7611              put P_27 @;

7612              put P_28 @;

7613              put P_29 @;

7614              put P_30 @;

7615              put P_31 @;

7616              put P_32 @;

7617              put P_33 @;

7618              put P_34 @;

7619              put P_35 @;

7620              put P_36 @;

7621              put P_37 @;

7622              put P_38 @;

7623              put P_39 @;

7624              put P_40 @;

7625              put P_41 @;

7626              put P_42 @;

7627              put P_43 @;

7628              put P_44 @;

7629              put P_45 @;

7630              put P_46 @;

7631              put P_47 @;

7632              put P_48 @;

7633              put P_49 @;

7634              put P_50 @;

7635              put P_51 @;

7636              put P_52 @;

7637              put P_53 @;

7638              put P_54 @;

7639              put P_55 @;

7640              put P_56 @;

791                                                        The SAS
System                            15:50 Friday, November 21, 2008

7641              put P_57 @;

7642              put P_58 @;

7643              put P_59 @;

7644              put P_60 @;

7645              put P_61 @;

7646              put P_62 @;

7647              put P_63 @;

7648              put P_64 @;

7649              put P_65 @;

7650              put P_66 @;

7651              put P_67 @;

7652              put P_68 @;

7653              put P_69 @;

7654              put P_70 @;

7655              put P_71 @;

7656              put P_72 @;

7657              put P_73 @;

7658              put P_74 @;

7659              put P_75 @;

7660              put P_76 @;

7661              put P_77 @;

7662              put P_78 @;

7663              put P_79 @;

7664              put P_80 @;

7665              put P_81 @;

7666              put P_82 @;

7667              put P_83 @;

7668              put P_84 @;

7669              put P_85 @;

7670              put P_86 @;

7671              put P_87 @;

7672              put P_88 @;

7673              put P_89 @;

7674              put P_90 @;

7675              put P_91 @;

7676              put P_92 @;

7677              put P_93 @;

7678              put P_94 @;

7679              put P_95 @;

7680              put P_96 @;

7681              put P_97 @;

7682              put P_98 @;

7683              put P_99 ;

7684              ;

7685            end;

7686           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

7687           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

7688           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_DP.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_DP.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:25:22,

      Create Time=21Nov2008:16:25:22

792                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: 2 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_DP.csv'.

      The minimum record length was 499.

      The maximum record length was 1316.

NOTE: There were 1 observations read from the data set TEMP4.HIGH_DP.

NOTE: DATA statement used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

1 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_DP.csv from TEMP4.HIGH_DP.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_DP.csv" file was successfully created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: Deleting WORK.D10 (memtype=DATA).

NOTE: Deleting WORK.D11 (memtype=DATA).

NOTE: Deleting WORK.D2 (memtype=DATA).

NOTE: Deleting WORK.D3 (memtype=DATA).

NOTE: Deleting WORK.D4 (memtype=DATA).

NOTE: Deleting WORK.D5 (memtype=DATA).

NOTE: Deleting WORK.D6 (memtype=DATA).

NOTE: Deleting WORK.D7 (memtype=DATA).

NOTE: Deleting WORK.D8 (memtype=DATA).

NOTE: Deleting WORK.D9 (memtype=DATA).

NOTE: Deleting WORK.X (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Copying TEMP3.HIGHCOMM3 to WORK.HIGHCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHCOMM3.

NOTE: The data set WORK.HIGHCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHCRUISE3 to WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHCRUISE3.

NOTE: The data set WORK.HIGHCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFBARGE3 to WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFBARGE3.

NOTE: The data set WORK.HIGHFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFSHIPS3 to WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFSHIPS3.

NOTE: The data set WORK.HIGHFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHPASS3 to WORK.HIGHPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHPASS3.

NOTE: The data set WORK.HIGHPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHREC3 to WORK.HIGHREC3 (memtype=DATA).

793                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set TEMP3.HIGHREC3.

NOTE: The data set WORK.HIGHREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.HIGHTBARGE3 to WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTBARGE3.

NOTE: The data set WORK.HIGHTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHTSHIPS3 to WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTSHIPS3.

NOTE: The data set WORK.HIGHTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHUTILITY3 to WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHUTILITY3.

NOTE: The data set WORK.HIGHUTILITY3 has 11 observations and 1
variables.

NOTE: Copying TEMP3.LOWCOMM3 to WORK.LOWCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWCOMM3.

NOTE: The data set WORK.LOWCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWCRUISE3 to WORK.LOWCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWCRUISE3.

NOTE: The data set WORK.LOWCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFBARGE3 to WORK.LOWFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFBARGE3.

NOTE: The data set WORK.LOWFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFSHIPS3 to WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFSHIPS3.

NOTE: The data set WORK.LOWFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWPASS3 to WORK.LOWPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWPASS3.

NOTE: The data set WORK.LOWPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWREC3 to WORK.LOWREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWREC3.

NOTE: The data set WORK.LOWREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.LOWTBARGE3 to WORK.LOWTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTBARGE3.

NOTE: The data set WORK.LOWTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWTSHIPS3 to WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTSHIPS3.

NOTE: The data set WORK.LOWTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWUTILITY3 to WORK.LOWUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWUTILITY3.

NOTE: The data set WORK.LOWUTILITY3 has 11 observations and 1 variables.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting TEMP.HIGHOUTDATA_DP (memtype=DATA).

NOTE: Deleting TEMP.HIGH_DP (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.N (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: The file WORK.D1 (memtype=DATA) was not found, but appears on a
DELETE statement.

794                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A1 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D1.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 11 observations read from the data set WORK.A1.

NOTE: The data set WORK.D1 has 11 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A2 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

795                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Appending WORK.A2 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A2.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 22 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A3 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A3 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A3.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 33 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

796                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A4 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A4.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 44 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A5 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A5.

NOTE: 11 observations added.

797                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.D1 has 55 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A6 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A6.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 66 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

798                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A7 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A7 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A7.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 77 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A8 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A8.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 88 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

799                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A9 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A9.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 99 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A10 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

800                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A10.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 110 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A11 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A11.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 121 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

801                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The file WORK.D1A (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A1 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D1A.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 121 observations read from the data set WORK.A1.

NOTE: The data set WORK.D1A has 121 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

802                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.A2 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A2.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 242 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A3 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A3.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 363 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

803                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A4 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A4.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 484 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A5 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

804                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A5 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A5.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 605 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A6 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A6.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 726 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

805                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A7 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A7 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A7.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 847 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A8 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A8.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 968 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

806                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A9 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A9.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 1089 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

807                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A10 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A10.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 1210 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A11 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A11.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 1331 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

808                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D2 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A1 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D2.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 1331 observations read from the data set WORK.A1.

NOTE: The data set WORK.D2 has 1331 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

809                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A2 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A2.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 2662 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A3 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A3.

810                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 3993 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A4 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A4.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 5324 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

811                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A5 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A5.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 6655 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A6 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A6.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 7986 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

812                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A7 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A7.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 9317 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A8 has 1331 observations and 4 variables.

813                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A8.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 10648 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A9 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A9.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 11979 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

814                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A10 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A10.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 13310 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A11 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

815                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A11 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A11.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 14641 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D1A (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D1B (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D7 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D3 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

816                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A1 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A1 to WORK.D3.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 14641 observations read from the data set WORK.A1.

NOTE: The data set WORK.D3 has 14641 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A2 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A2 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A2.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 29282 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

817                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A3 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A3 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A3.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 43923 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A4 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

818                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A4 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A4.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 58564 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A5 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A5.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 73205 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

819                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A6 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A6.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 87846 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A7 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A7.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 102487 observations and 5 variables.

820                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A8 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A8.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 117128 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

821                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A9 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A9.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 131769 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A10 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A10.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 146410 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

822                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A11 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A11.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 161051 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D6 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D4 (memtype=DATA) was not found, but appears on a
DELETE statement.

823                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A1 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A1 to WORK.D4.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 161051 observations read from the data set WORK.A1.

NOTE: The data set WORK.D4 has 161051 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A2 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

824                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A2 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A2.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 322102 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A3 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A3 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A3.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 483153 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

825                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set WORK.HIGHCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A4 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A4 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A4.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 644204 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A5 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A5 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A5.

826                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 805255 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A6 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A6 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A6.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 966306 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

827                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A7 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A7 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A7.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 1127357 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A8 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A8 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A8.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 1288408 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

828                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A9 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A9 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A9.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 1449459 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A10 has 161051 observations and 6 variables.

829                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A10 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A10.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 1610510 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A11 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A11 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A11.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 1771561 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

830                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Deleting WORK.D3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D9 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D10 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D5 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1771561 observations read from the data set WORK.D4.

NOTE: The data set WORK.A1 has 1771561 observations and 7 variables.

NOTE: DATA statement used (Total process time):

      real time           0.59 seconds

      cpu time            0.54 seconds

      

NOTE: Appending WORK.A1 to WORK.D5.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 1771561 observations read from the data set WORK.A1.

NOTE: The data set WORK.D5 has 1771561 observations and 7 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.31 seconds

831                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.31 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1771561 observations read from the data set WORK.D4.

NOTE: The data set WORK.A2 has 1771561 observations and 7 variables.

NOTE: DATA statement used (Total process time):

      real time           1.23 seconds

      cpu time            0.54 seconds

      

NOTE: Appending WORK.A2 to WORK.D5.

NOTE: There were 1771561 observations read from the data set WORK.A2.

NOTE: 1771561 observations added.

NOTE: The data set WORK.D5 has 3543122 observations and 7 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           2.00 seconds

      cpu time            0.31 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           4.03 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

832                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1771561 observations read from the data set WORK.D4.

NOTE: The data set WORK.A3 has 1771561 observations and 7 variables.

NOTE: DATA statement used (Total process time):

      real time           0.59 seconds

      cpu time            0.53 seconds

      

NOTE: Appending WORK.A3 to WORK.D5.

NOTE: There were 1771561 observations read from the data set WORK.A3.

NOTE: 1771561 observations added.

NOTE: The data set WORK.D5 has 5314683 observations and 7 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.29 seconds

      cpu time            0.29 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1771561 observations read from the data set WORK.D4.

NOTE: The data set WORK.A4 has 1771561 observations and 7 variables.

NOTE: DATA statement used (Total process time):

      real time           0.54 seconds

      cpu time            0.51 seconds

      

NOTE: Appending WORK.A4 to WORK.D5.

NOTE: There were 1771561 observations read from the data set WORK.A4.

NOTE: 1771561 observations added.

NOTE: The data set WORK.D5 has 7086244 observations and 7 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.35 seconds

      cpu time            0.28 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

833                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1771561 observations read from the data set WORK.D4.

NOTE: The data set WORK.A5 has 1771561 observations and 7 variables.

NOTE: DATA statement used (Total process time):

      real time           0.57 seconds

      cpu time            0.56 seconds

      

NOTE: Appending WORK.A5 to WORK.D5.

NOTE: There were 1771561 observations read from the data set WORK.A5.

NOTE: 1771561 observations added.

NOTE: The data set WORK.D5 has 8857805 observations and 7 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           1.54 seconds

      cpu time            0.31 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           4.09 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1771561 observations read from the data set WORK.D4.

NOTE: The data set WORK.A6 has 1771561 observations and 7 variables.

NOTE: DATA statement used (Total process time):

      real time           0.53 seconds

      cpu time            0.50 seconds

      

834                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A6 to WORK.D5.

NOTE: There were 1771561 observations read from the data set WORK.A6.

NOTE: 1771561 observations added.

NOTE: The data set WORK.D5 has 10629366 observations and 7 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           1.37 seconds

      cpu time            0.35 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           4.06 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1771561 observations read from the data set WORK.D4.

NOTE: The data set WORK.A7 has 1771561 observations and 7 variables.

NOTE: DATA statement used (Total process time):

      real time           0.60 seconds

      cpu time            0.59 seconds

      

NOTE: Appending WORK.A7 to WORK.D5.

NOTE: There were 1771561 observations read from the data set WORK.A7.

NOTE: 1771561 observations added.

NOTE: The data set WORK.D5 has 12400927 observations and 7 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           1.31 seconds

      cpu time            0.28 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           4.07 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTSHIPS3.

835                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1771561 observations read from the data set WORK.D4.

NOTE: The data set WORK.A8 has 1771561 observations and 7 variables.

NOTE: DATA statement used (Total process time):

      real time           0.56 seconds

      cpu time            0.56 seconds

      

NOTE: Appending WORK.A8 to WORK.D5.

NOTE: There were 1771561 observations read from the data set WORK.A8.

NOTE: 1771561 observations added.

NOTE: The data set WORK.D5 has 14172488 observations and 7 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           1.35 seconds

      cpu time            0.31 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           4.06 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1771561 observations read from the data set WORK.D4.

NOTE: The data set WORK.A9 has 1771561 observations and 7 variables.

NOTE: DATA statement used (Total process time):

      real time           0.59 seconds

      cpu time            0.53 seconds

      

NOTE: Appending WORK.A9 to WORK.D5.

NOTE: There were 1771561 observations read from the data set WORK.A9.

NOTE: 1771561 observations added.

NOTE: The data set WORK.D5 has 15944049 observations and 7 variables.

836                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE APPEND used (Total process time):

      real time           1.32 seconds

      cpu time            0.25 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           4.09 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1771561 observations read from the data set WORK.D4.

NOTE: The data set WORK.A10 has 1771561 observations and 7 variables.

NOTE: DATA statement used (Total process time):

      real time           0.64 seconds

      cpu time            0.60 seconds

      

NOTE: Appending WORK.A10 to WORK.D5.

NOTE: There were 1771561 observations read from the data set WORK.A10.

NOTE: 1771561 observations added.

NOTE: The data set WORK.D5 has 17715610 observations and 7 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           2.26 seconds

      cpu time            0.34 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           3.43 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

837                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1771561 observations read from the data set WORK.D4.

NOTE: The data set WORK.A11 has 1771561 observations and 7 variables.

NOTE: DATA statement used (Total process time):

      real time           3.56 seconds

      cpu time            0.56 seconds

      

NOTE: Appending WORK.A11 to WORK.D5.

NOTE: There were 1771561 observations read from the data set WORK.A11.

NOTE: 1771561 observations added.

NOTE: The data set WORK.D5 has 19487171 observations and 7 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.96 seconds

      cpu time            0.36 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.D4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D8 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 19487171 observations read from the data set WORK.D5.

NOTE: The data set TEMP.HIGH_IF has 19487171 observations and 8
variables.

NOTE: DATA statement used (Total process time):

      real time           10.09 seconds

      cpu time            7.15 seconds

      

NOTE: Deleting WORK.D5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           4.23 seconds

      cpu time            0.17 seconds

      

838                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.HIGHCOMM3 (memtype=DATA).

NOTE: Deleting WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHPASS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHREC3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.LOWCOMM3 (memtype=DATA).

NOTE: Deleting WORK.LOWCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWPASS3 (memtype=DATA).

NOTE: Deleting WORK.LOWREC3 (memtype=DATA).

NOTE: Deleting WORK.LOWTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.LARGE2 created, with 19487171 rows and 17 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           37.15 seconds

      cpu time            36.96 seconds

      

NOTE: Variable cs_cost is uninitialized.

NOTE: Variable rs_cost is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      19487171 at 7688:140   19487171 at 7688:16    

NOTE: There were 19487171 observations read from the data set
WORK.LARGE2.

NOTE: The data set WORK.LARGE3 has 19487171 observations and 20
variables.

NOTE: DATA statement used (Total process time):

      real time           21.76 seconds

      cpu time            17.07 seconds

      

NOTE: Deleting WORK.LARGE2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           3.64 seconds

      cpu time            0.34 seconds

      

NOTE: Table WORK.LARGE3A created, with 19487171 rows and 31 columns.

839                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE SQL used (Total process time):

      real time           2:04.56

      cpu time            1:03.43

      

NOTE: Deleting WORK.LARGE3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           4.09 seconds

      cpu time            0.50 seconds

      

NOTE: There were 19487171 observations read from the data set
WORK.LARGE3A.

NOTE: The data set WORK.LARGE3B has 19487171 observations and 43
variables.

NOTE: DATA statement used (Total process time):

      real time           1:18.51

      cpu time            30.21 seconds

      

NOTE: Deleting WORK.LARGE3A (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           6.03 seconds

      cpu time            0.65 seconds

      

NOTE: Table WORK.LARGE4 created, with 19487171 rows and 34 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           2:01.96

      cpu time            55.82 seconds

      

NOTE: There were 19487171 observations read from the data set
WORK.LARGE4.

NOTE: The data set TEMP4.LARGE4 has 19487171 observations and 34
variables.

NOTE: DATA statement used (Total process time):

      real time           3:01.90

      cpu time            18.01 seconds

      

NOTE: Deleting WORK.LARGE3B (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           4.60 seconds

      cpu time            0.73 seconds

      

NOTE: There were 19487171 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L1 has 19487171 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           1:53.06

840                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            7.62 seconds

      

NOTE: There were 19487171 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L2 has 19487171 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           11.15 seconds

      cpu time            8.14 seconds

      

NOTE: There were 19487171 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L3 has 19487171 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           10.95 seconds

      cpu time            8.20 seconds

      

NOTE: There were 19487171 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L4 has 19487171 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           11.00 seconds

      cpu time            8.23 seconds

      

NOTE: There were 19487171 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L5 has 19487171 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           11.01 seconds

      cpu time            8.09 seconds

      

NOTE: There were 19487171 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L6 has 19487171 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           10.96 seconds

      cpu time            8.23 seconds

      

NOTE: There were 19487171 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L7 has 19487171 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           11.01 seconds

      cpu time            8.21 seconds

      

NOTE: There were 19487171 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L8 has 19487171 observations and 2 variables.

841                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           11.03 seconds

      cpu time            8.28 seconds

      

NOTE: There were 19487171 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L9 has 19487171 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           10.98 seconds

      cpu time            8.04 seconds

      

NOTE: There were 19487171 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L10 has 19487171 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           11.00 seconds

      cpu time            8.32 seconds

      

NOTE: There were 19487171 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L11 has 19487171 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           12.06 seconds

      cpu time            8.43 seconds

      

NOTE: There were 19487171 observations read from the data set WORK.L1.

NOTE: There were 19487171 observations read from the data set WORK.L2.

NOTE: There were 19487171 observations read from the data set WORK.L3.

NOTE: There were 19487171 observations read from the data set WORK.L4.

NOTE: There were 19487171 observations read from the data set WORK.L5.

NOTE: There were 19487171 observations read from the data set WORK.L6.

NOTE: There were 19487171 observations read from the data set WORK.L7.

NOTE: There were 19487171 observations read from the data set WORK.L8.

NOTE: There were 19487171 observations read from the data set WORK.L9.

NOTE: There were 19487171 observations read from the data set WORK.L10.

NOTE: There were 19487171 observations read from the data set WORK.L11.

NOTE: The data set WORK.L has 214358881 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           43.43 seconds

      cpu time            39.85 seconds

      

NOTE: Deleting WORK.L1 (memtype=DATA).

NOTE: Deleting WORK.L2 (memtype=DATA).

NOTE: Deleting WORK.L3 (memtype=DATA).

NOTE: Deleting WORK.L4 (memtype=DATA).

NOTE: Deleting WORK.L5 (memtype=DATA).

NOTE: Deleting WORK.L6 (memtype=DATA).

NOTE: Deleting WORK.L7 (memtype=DATA).

NOTE: Deleting WORK.L8 (memtype=DATA).

842                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.L9 (memtype=DATA).

NOTE: Deleting WORK.L10 (memtype=DATA).

NOTE: Deleting WORK.L11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.32 seconds

      cpu time            0.07 seconds

      

NOTE: There were 214358881 observations read from the data set WORK.L.

NOTE: The data set WORK.L has 214358881 observations and 2 variables.

NOTE: PROCEDURE SORT used (Total process time):

      real time           2:39.73

      cpu time            3:49.61

      

NOTE: The data set TEMP4.HIGH_IF has 1 observations and 102 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           1:13.43

      cpu time            1:10.82

      

NOTE: Deleting WORK.L (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           1.46 seconds

      cpu time            0.42 seconds

      

NOTE: There were 19487171 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.LARGE5 has 19487171 observations and 46
variables.

NOTE: DATA statement used (Total process time):

      real time           3:11.76

      cpu time            38.42 seconds

      

NOTE: Deleting WORK.LARGE4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.31 seconds

      cpu time            0.28 seconds

      

NOTE: Table WORK.X created, with 3 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D1 created, with 3 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           14.63 seconds

      cpu time            19.98 seconds

      

843                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D2 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           15.98 seconds

      cpu time            19.79 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D3 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           16.01 seconds

      cpu time            19.76 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D4 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           12.95 seconds

      cpu time            19.62 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D5 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           16.04 seconds

      cpu time            19.54 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D6 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           13.96 seconds

      cpu time            19.29 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

844                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Table WORK.D7 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           14.00 seconds

      cpu time            19.53 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D8 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           14.00 seconds

      cpu time            19.14 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D9 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           13.98 seconds

      cpu time            20.09 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D10 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           13.98 seconds

      cpu time            19.32 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D11 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           14.00 seconds

      cpu time            19.34 seconds

      

NOTE: Deleting WORK.LARGE5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           4.53 seconds

      cpu time            0.87 seconds

      

845                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 3 observations read from the data set WORK.D1.

NOTE: There were 2 observations read from the data set WORK.D2.

NOTE: There were 2 observations read from the data set WORK.D3.

NOTE: There were 2 observations read from the data set WORK.D4.

NOTE: There were 2 observations read from the data set WORK.D5.

NOTE: There were 2 observations read from the data set WORK.D6.

NOTE: There were 2 observations read from the data set WORK.D7.

NOTE: There were 2 observations read from the data set WORK.D8.

NOTE: There were 2 observations read from the data set WORK.D9.

NOTE: There were 2 observations read from the data set WORK.D10.

NOTE: There were 1 observations read from the data set WORK.D11.

NOTE: The data set TEMP.HIGHOUTDATA_IF has 3 observations and 13
variables.

NOTE: DATA statement used (Total process time):

      real time           0.03 seconds

      cpu time            0.01 seconds

      

7689       
/**********************************************************************

7690        *   PRODUCT:   SAS

7691        *   VERSION:   9.2

7692        *   CREATOR:   External File Interface

7693        *   DATE:      21NOV08

7694        *   DESC:      Generated SAS Datastep Code

7695        *   TEMPLATE SOURCE:  (None Specified.)

7696       
***********************************************************************/

7697           data _null_;

7698           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

7699           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

7700           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_IF.csv' delimiter=',' DSD

7700     ! DROPOVER lrecl=32767;

7701           if _n_ = 1 then        /* write column names or labels */

7702            do;

7703              put

7704                 "NAICS"

7705              ','

7706                 "D"

7707              ','

7708                 "percent1"

7709              ','

7710                 "percent2"

7711              ','

7712                 "percent3"

7713              ','

7714                 "percent4"

7715              ','

7716                 "percent5"

7717              ','

7718                 "percent6"

7719              ','

7720                 "percent7"

7721              ','

7722                 "percent8"

846                                                        The SAS
System                            15:50 Friday, November 21, 2008

7723              ','

7724                 "percent9"

7725              ','

7726                 "percent10"

7727              ','

7728                 "percent11"

7729              ;

7730            end;

7731          set  TEMP.HIGHOUTDATA_IF   end=EFIEOD;

7732              format NAICS $16. ;

7733              format D best12. ;

7734              format percent1 percent8.2 ;

7735              format percent2 percent8.2 ;

7736              format percent3 percent8.2 ;

7737              format percent4 percent8.2 ;

7738              format percent5 percent8.2 ;

7739              format percent6 percent8.2 ;

7740              format percent7 percent8.2 ;

7741              format percent8 percent8.2 ;

7742              format percent9 percent8.2 ;

7743              format percent10 percent8.2 ;

7744              format percent11 percent8.2 ;

7745            do;

7746              EFIOUT + 1;

7747              put NAICS $ @;

7748              put D @;

7749              put percent1 @;

7750              put percent2 @;

7751              put percent3 @;

7752              put percent4 @;

7753              put percent5 @;

7754              put percent6 @;

7755              put percent7 @;

7756              put percent8 @;

7757              put percent9 @;

7758              put percent10 @;

7759              put percent11 ;

7760              ;

7761            end;

7762           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

7763           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

7764           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_IF.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_IF.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:50:33,

      Create Time=21Nov2008:16:50:33

NOTE: 4 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_IF.csv'.

      The minimum record length was 25.

      The maximum record length was 108.

NOTE: There were 3 observations read from the data set
TEMP.HIGHOUTDATA_IF.

NOTE: At least one W.D format was too small for the number to be
printed. The decimal may be shifted by the "BEST" format.

847                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.07 seconds

      cpu time            0.00 seconds

      

3 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_IF.csv from TEMP.HIGHOUTDATA_IF.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_IF.csv" file was successfully
created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           1.01 seconds

      cpu time            0.04 seconds

      

7765       
/**********************************************************************

7766        *   PRODUCT:   SAS

7767        *   VERSION:   9.2

7768        *   CREATOR:   External File Interface

7769        *   DATE:      21NOV08

7770        *   DESC:      Generated SAS Datastep Code

7771        *   TEMPLATE SOURCE:  (None Specified.)

7772       
***********************************************************************/

7773           data _null_;

7774           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

7775           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

7776           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_IF.csv' delimiter=',' DSD DROPOVER

7776     ! lrecl=32767;

7777           if _n_ = 1 then        /* write column names or labels */

7778            do;

7779              put

7780                 "P_A"

7781              ','

7782                 "P_100"

7783              ','

7784                 "P_0"

7785              ','

7786                 "P_1"

7787              ','

7788                 "P_2"

7789              ','

7790                 "P_3"

7791              ','

7792                 "P_4"

7793              ','

7794                 "P_5"

7795              ','

7796                 "P_6"

7797              ','

7798                 "P_7"

7799              ','

7800                 "P_8"

7801              ','

7802                 "P_9"

848                                                        The SAS
System                            15:50 Friday, November 21, 2008

7803              ','

7804                 "P_10"

7805              ','

7806                 "P_11"

7807              ','

7808                 "P_12"

7809              ','

7810                 "P_13"

7811              ','

7812                 "P_14"

7813              ','

7814                 "P_15"

7815              ','

7816                 "P_16"

7817              ','

7818                 "P_17"

7819              ','

7820                 "P_18"

7821              ','

7822                 "P_19"

7823              ','

7824                 "P_20"

7825              ','

7826                 "P_21"

7827              ','

7828                 "P_22"

7829              ','

7830                 "P_23"

7831              ','

7832                 "P_24"

7833              ','

7834                 "P_25"

7835              ','

7836                 "P_26"

7837              ','

7838                 "P_27"

7839              ','

7840                 "P_28"

7841              ','

7842                 "P_29"

7843              ','

7844                 "P_30"

7845              ','

7846                 "P_31"

7847              ','

7848                 "P_32"

7849              ','

7850                 "P_33"

7851              ','

7852                 "P_34"

7853              ','

7854                 "P_35"

7855              ','

7856                 "P_36"

849                                                        The SAS
System                            15:50 Friday, November 21, 2008

7857              ','

7858                 "P_37"

7859              ','

7860                 "P_38"

7861              ','

7862                 "P_39"

7863              ','

7864                 "P_40"

7865              ','

7866                 "P_41"

7867              ','

7868                 "P_42"

7869              ','

7870                 "P_43"

7871              ','

7872                 "P_44"

7873              ','

7874                 "P_45"

7875              ','

7876                 "P_46"

7877              ','

7878                 "P_47"

7879              ','

7880                 "P_48"

7881              ','

7882                 "P_49"

7883              ','

7884                 "P_50"

7885              ','

7886                 "P_51"

7887              ','

7888                 "P_52"

7889              ','

7890                 "P_53"

7891              ','

7892                 "P_54"

7893              ','

7894                 "P_55"

7895              ','

7896                 "P_56"

7897              ','

7898                 "P_57"

7899              ','

7900                 "P_58"

7901              ','

7902                 "P_59"

7903              ','

7904                 "P_60"

7905              ','

7906                 "P_61"

7907              ','

7908                 "P_62"

7909              ','

7910                 "P_63"

850                                                        The SAS
System                            15:50 Friday, November 21, 2008

7911              ','

7912                 "P_64"

7913              ','

7914                 "P_65"

7915              ','

7916                 "P_66"

7917              ','

7918                 "P_67"

7919              ','

7920                 "P_68"

7921              ','

7922                 "P_69"

7923              ','

7924                 "P_70"

7925              ','

7926                 "P_71"

7927              ','

7928                 "P_72"

7929              ','

7930                 "P_73"

7931              ','

7932                 "P_74"

7933              ','

7934                 "P_75"

7935              ','

7936                 "P_76"

7937              ','

7938                 "P_77"

7939              ','

7940                 "P_78"

7941              ','

7942                 "P_79"

7943              ','

7944                 "P_80"

7945              ','

7946                 "P_81"

7947              ','

7948                 "P_82"

7949              ','

7950                 "P_83"

7951              ','

7952                 "P_84"

7953              ','

7954                 "P_85"

7955              ','

7956                 "P_86"

7957              ','

7958                 "P_87"

7959              ','

7960                 "P_88"

7961              ','

7962                 "P_89"

7963              ','

7964                 "P_90"

851                                                        The SAS
System                            15:50 Friday, November 21, 2008

7965              ','

7966                 "P_91"

7967              ','

7968                 "P_92"

7969              ','

7970                 "P_93"

7971              ','

7972                 "P_94"

7973              ','

7974                 "P_95"

7975              ','

7976                 "P_96"

7977              ','

7978                 "P_97"

7979              ','

7980                 "P_98"

7981              ','

7982                 "P_99"

7983              ;

7984            end;

7985          set  TEMP4.HIGH_IF   end=EFIEOD;

7986              format P_A best12. ;

7987              format P_100 best12. ;

7988              format P_0 best12. ;

7989              format P_1 best12. ;

7990              format P_2 best12. ;

7991              format P_3 best12. ;

7992              format P_4 best12. ;

7993              format P_5 best12. ;

7994              format P_6 best12. ;

7995              format P_7 best12. ;

7996              format P_8 best12. ;

7997              format P_9 best12. ;

7998              format P_10 best12. ;

7999              format P_11 best12. ;

8000              format P_12 best12. ;

8001              format P_13 best12. ;

8002              format P_14 best12. ;

8003              format P_15 best12. ;

8004              format P_16 best12. ;

8005              format P_17 best12. ;

8006              format P_18 best12. ;

8007              format P_19 best12. ;

8008              format P_20 best12. ;

8009              format P_21 best12. ;

8010              format P_22 best12. ;

8011              format P_23 best12. ;

8012              format P_24 best12. ;

8013              format P_25 best12. ;

8014              format P_26 best12. ;

8015              format P_27 best12. ;

8016              format P_28 best12. ;

8017              format P_29 best12. ;

8018              format P_30 best12. ;

852                                                        The SAS
System                            15:50 Friday, November 21, 2008

8019              format P_31 best12. ;

8020              format P_32 best12. ;

8021              format P_33 best12. ;

8022              format P_34 best12. ;

8023              format P_35 best12. ;

8024              format P_36 best12. ;

8025              format P_37 best12. ;

8026              format P_38 best12. ;

8027              format P_39 best12. ;

8028              format P_40 best12. ;

8029              format P_41 best12. ;

8030              format P_42 best12. ;

8031              format P_43 best12. ;

8032              format P_44 best12. ;

8033              format P_45 best12. ;

8034              format P_46 best12. ;

8035              format P_47 best12. ;

8036              format P_48 best12. ;

8037              format P_49 best12. ;

8038              format P_50 best12. ;

8039              format P_51 best12. ;

8040              format P_52 best12. ;

8041              format P_53 best12. ;

8042              format P_54 best12. ;

8043              format P_55 best12. ;

8044              format P_56 best12. ;

8045              format P_57 best12. ;

8046              format P_58 best12. ;

8047              format P_59 best12. ;

8048              format P_60 best12. ;

8049              format P_61 best12. ;

8050              format P_62 best12. ;

8051              format P_63 best12. ;

8052              format P_64 best12. ;

8053              format P_65 best12. ;

8054              format P_66 best12. ;

8055              format P_67 best12. ;

8056              format P_68 best12. ;

8057              format P_69 best12. ;

8058              format P_70 best12. ;

8059              format P_71 best12. ;

8060              format P_72 best12. ;

8061              format P_73 best12. ;

8062              format P_74 best12. ;

8063              format P_75 best12. ;

8064              format P_76 best12. ;

8065              format P_77 best12. ;

8066              format P_78 best12. ;

8067              format P_79 best12. ;

8068              format P_80 best12. ;

8069              format P_81 best12. ;

8070              format P_82 best12. ;

8071              format P_83 best12. ;

8072              format P_84 best12. ;

853                                                        The SAS
System                            15:50 Friday, November 21, 2008

8073              format P_85 best12. ;

8074              format P_86 best12. ;

8075              format P_87 best12. ;

8076              format P_88 best12. ;

8077              format P_89 best12. ;

8078              format P_90 best12. ;

8079              format P_91 best12. ;

8080              format P_92 best12. ;

8081              format P_93 best12. ;

8082              format P_94 best12. ;

8083              format P_95 best12. ;

8084              format P_96 best12. ;

8085              format P_97 best12. ;

8086              format P_98 best12. ;

8087              format P_99 best12. ;

8088            do;

8089              EFIOUT + 1;

8090              put P_A @;

8091              put P_100 @;

8092              put P_0 @;

8093              put P_1 @;

8094              put P_2 @;

8095              put P_3 @;

8096              put P_4 @;

8097              put P_5 @;

8098              put P_6 @;

8099              put P_7 @;

8100              put P_8 @;

8101              put P_9 @;

8102              put P_10 @;

8103              put P_11 @;

8104              put P_12 @;

8105              put P_13 @;

8106              put P_14 @;

8107              put P_15 @;

8108              put P_16 @;

8109              put P_17 @;

8110              put P_18 @;

8111              put P_19 @;

8112              put P_20 @;

8113              put P_21 @;

8114              put P_22 @;

8115              put P_23 @;

8116              put P_24 @;

8117              put P_25 @;

8118              put P_26 @;

8119              put P_27 @;

8120              put P_28 @;

8121              put P_29 @;

8122              put P_30 @;

8123              put P_31 @;

8124              put P_32 @;

8125              put P_33 @;

8126              put P_34 @;

854                                                        The SAS
System                            15:50 Friday, November 21, 2008

8127              put P_35 @;

8128              put P_36 @;

8129              put P_37 @;

8130              put P_38 @;

8131              put P_39 @;

8132              put P_40 @;

8133              put P_41 @;

8134              put P_42 @;

8135              put P_43 @;

8136              put P_44 @;

8137              put P_45 @;

8138              put P_46 @;

8139              put P_47 @;

8140              put P_48 @;

8141              put P_49 @;

8142              put P_50 @;

8143              put P_51 @;

8144              put P_52 @;

8145              put P_53 @;

8146              put P_54 @;

8147              put P_55 @;

8148              put P_56 @;

8149              put P_57 @;

8150              put P_58 @;

8151              put P_59 @;

8152              put P_60 @;

8153              put P_61 @;

8154              put P_62 @;

8155              put P_63 @;

8156              put P_64 @;

8157              put P_65 @;

8158              put P_66 @;

8159              put P_67 @;

8160              put P_68 @;

8161              put P_69 @;

8162              put P_70 @;

8163              put P_71 @;

8164              put P_72 @;

8165              put P_73 @;

8166              put P_74 @;

8167              put P_75 @;

8168              put P_76 @;

8169              put P_77 @;

8170              put P_78 @;

8171              put P_79 @;

8172              put P_80 @;

8173              put P_81 @;

8174              put P_82 @;

8175              put P_83 @;

8176              put P_84 @;

8177              put P_85 @;

8178              put P_86 @;

8179              put P_87 @;

8180              put P_88 @;

855                                                        The SAS
System                            15:50 Friday, November 21, 2008

8181              put P_89 @;

8182              put P_90 @;

8183              put P_91 @;

8184              put P_92 @;

8185              put P_93 @;

8186              put P_94 @;

8187              put P_95 @;

8188              put P_96 @;

8189              put P_97 @;

8190              put P_98 @;

8191              put P_99 ;

8192              ;

8193            end;

8194           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

8195           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

8196           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_IF.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_IF.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:50:34,

      Create Time=21Nov2008:16:50:34

NOTE: 2 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_IF.csv'.

      The minimum record length was 499.

      The maximum record length was 1315.

NOTE: There were 1 observations read from the data set TEMP4.HIGH_IF.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.00 seconds

      

1 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_IF.csv from TEMP4.HIGH_IF.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_IF.csv" file was successfully created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.09 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: Deleting WORK.D10 (memtype=DATA).

NOTE: Deleting WORK.D11 (memtype=DATA).

NOTE: Deleting WORK.D2 (memtype=DATA).

NOTE: Deleting WORK.D3 (memtype=DATA).

NOTE: Deleting WORK.D4 (memtype=DATA).

NOTE: Deleting WORK.D5 (memtype=DATA).

NOTE: Deleting WORK.D6 (memtype=DATA).

NOTE: Deleting WORK.D7 (memtype=DATA).

NOTE: Deleting WORK.D8 (memtype=DATA).

NOTE: Deleting WORK.D9 (memtype=DATA).

NOTE: Deleting WORK.X (memtype=DATA).

856                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Copying TEMP3.HIGHCOMM3 to WORK.HIGHCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHCOMM3.

NOTE: The data set WORK.HIGHCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHCRUISE3 to WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHCRUISE3.

NOTE: The data set WORK.HIGHCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFBARGE3 to WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFBARGE3.

NOTE: The data set WORK.HIGHFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFSHIPS3 to WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFSHIPS3.

NOTE: The data set WORK.HIGHFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHPASS3 to WORK.HIGHPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHPASS3.

NOTE: The data set WORK.HIGHPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHREC3 to WORK.HIGHREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHREC3.

NOTE: The data set WORK.HIGHREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.HIGHTBARGE3 to WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTBARGE3.

NOTE: The data set WORK.HIGHTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHTSHIPS3 to WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTSHIPS3.

NOTE: The data set WORK.HIGHTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHUTILITY3 to WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHUTILITY3.

NOTE: The data set WORK.HIGHUTILITY3 has 11 observations and 1
variables.

NOTE: Copying TEMP3.LOWCOMM3 to WORK.LOWCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWCOMM3.

NOTE: The data set WORK.LOWCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWCRUISE3 to WORK.LOWCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWCRUISE3.

NOTE: The data set WORK.LOWCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFBARGE3 to WORK.LOWFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFBARGE3.

NOTE: The data set WORK.LOWFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFSHIPS3 to WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFSHIPS3.

NOTE: The data set WORK.LOWFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWPASS3 to WORK.LOWPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWPASS3.

NOTE: The data set WORK.LOWPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWREC3 to WORK.LOWREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWREC3.

NOTE: The data set WORK.LOWREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.LOWTBARGE3 to WORK.LOWTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTBARGE3.

NOTE: The data set WORK.LOWTBARGE3 has 11 observations and 1 variables.

857                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Copying TEMP3.LOWTSHIPS3 to WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTSHIPS3.

NOTE: The data set WORK.LOWTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWUTILITY3 to WORK.LOWUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWUTILITY3.

NOTE: The data set WORK.LOWUTILITY3 has 11 observations and 1 variables.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.28 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting TEMP.HIGHOUTDATA_IF (memtype=DATA).

NOTE: Deleting TEMP.HIGH_IF (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.06 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.N (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: The file WORK.D1 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A1 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A1 to WORK.D1.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 11 observations read from the data set WORK.A1.

NOTE: The data set WORK.D1 has 11 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

858                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A2 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A2.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 22 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A3 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

859                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A3 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A3.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 33 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A4 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A4.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 44 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

860                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A5 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A5.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 55 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A6 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A6 to WORK.D1.

861                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set WORK.A6.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 66 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A7 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A7.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 77 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

862                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A8 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A8.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 88 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A9 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A9.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 99 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

863                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A10 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A10.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 110 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

864                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.A11 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A11.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 121 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set TEMP.HIGH_IP has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D1A (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D1B (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D7 (memtype=DATA) was not found, but appears on a
DELETE statement.

865                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D2 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D6 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D3 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D9 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D10 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D4 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D8 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D5 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

866                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.HIGHCOMM3 (memtype=DATA).

NOTE: Deleting WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHPASS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHREC3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.LOWCOMM3 (memtype=DATA).

NOTE: Deleting WORK.LOWCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWPASS3 (memtype=DATA).

NOTE: Deleting WORK.LOWREC3 (memtype=DATA).

NOTE: Deleting WORK.LOWTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.LARGE2 created, with 121 rows and 12 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: Variable cs_cost is uninitialized.

NOTE: Variable cf_cost is uninitialized.

NOTE: Variable fb_cost is uninitialized.

NOTE: Variable fs_cost is uninitialized.

NOTE: Variable rs_cost is uninitialized.

NOTE: Variable tb_cost is uninitialized.

NOTE: Variable ts_cost is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      121 at 8196:140   121 at 8196:164   121 at 8196:188   121 at
8196:212   121 at 8196:16    121 at 8196:40    121 at 8196:64

NOTE: There were 121 observations read from the data set WORK.LARGE2.

NOTE: The data set WORK.LARGE3 has 121 observations and 20 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

867                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.LARGE2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.LARGE3A created, with 121 rows and 31 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.LARGE3A.

NOTE: The data set WORK.LARGE3B has 121 observations and 43 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.LARGE3A (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.LARGE4 created, with 121 rows and 34 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.LARGE4.

NOTE: The data set TEMP4.LARGE4 has 121 observations and 34 variables.

NOTE: DATA statement used (Total process time):

      real time           0.15 seconds

      cpu time            0.09 seconds

      

NOTE: Deleting WORK.LARGE3B (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

868                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L1 has 121 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L2 has 121 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L3 has 121 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 121 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L4 has 121 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L5 has 121 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L6 has 121 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.LARGE4.

869                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.L7 has 121 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L8 has 121 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 121 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L9 has 121 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L10 has 121 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L11 has 121 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.L1.

NOTE: There were 121 observations read from the data set WORK.L2.

NOTE: There were 121 observations read from the data set WORK.L3.

NOTE: There were 121 observations read from the data set WORK.L4.

NOTE: There were 121 observations read from the data set WORK.L5.

NOTE: There were 121 observations read from the data set WORK.L6.

NOTE: There were 121 observations read from the data set WORK.L7.

NOTE: There were 121 observations read from the data set WORK.L8.

NOTE: There were 121 observations read from the data set WORK.L9.

NOTE: There were 121 observations read from the data set WORK.L10.

NOTE: There were 121 observations read from the data set WORK.L11.

NOTE: The data set WORK.L has 1331 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

870                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.L1 (memtype=DATA).

NOTE: Deleting WORK.L2 (memtype=DATA).

NOTE: Deleting WORK.L3 (memtype=DATA).

NOTE: Deleting WORK.L4 (memtype=DATA).

NOTE: Deleting WORK.L5 (memtype=DATA).

NOTE: Deleting WORK.L6 (memtype=DATA).

NOTE: Deleting WORK.L7 (memtype=DATA).

NOTE: Deleting WORK.L8 (memtype=DATA).

NOTE: Deleting WORK.L9 (memtype=DATA).

NOTE: Deleting WORK.L10 (memtype=DATA).

NOTE: Deleting WORK.L11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1331 observations read from the data set WORK.L.

NOTE: The data set WORK.L has 1331 observations and 2 variables.

NOTE: PROCEDURE SORT used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The data set TEMP4.HIGH_IP has 1 observations and 102 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.L (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.LARGE5 has 121 observations and 46 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.LARGE4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

871                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D1 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D2 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D3 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.03 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D4 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D5 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D6 created, with 1 rows and 3 columns.

872                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D7 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D8 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D9 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D10 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D11 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

873                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Deleting WORK.LARGE5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 2 observations read from the data set WORK.D1.

NOTE: There were 2 observations read from the data set WORK.D2.

NOTE: There were 1 observations read from the data set WORK.D3.

NOTE: There were 1 observations read from the data set WORK.D4.

NOTE: There were 1 observations read from the data set WORK.D5.

NOTE: There were 1 observations read from the data set WORK.D6.

NOTE: There were 1 observations read from the data set WORK.D7.

NOTE: There were 1 observations read from the data set WORK.D8.

NOTE: There were 1 observations read from the data set WORK.D9.

NOTE: There were 1 observations read from the data set WORK.D10.

NOTE: There were 1 observations read from the data set WORK.D11.

NOTE: The data set TEMP.HIGHOUTDATA_IP has 3 observations and 13
variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

8197       
/**********************************************************************

8198        *   PRODUCT:   SAS

8199        *   VERSION:   9.2

8200        *   CREATOR:   External File Interface

8201        *   DATE:      21NOV08

8202        *   DESC:      Generated SAS Datastep Code

8203        *   TEMPLATE SOURCE:  (None Specified.)

8204       
***********************************************************************/

8205           data _null_;

8206           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

8207           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

8208           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_IP.csv' delimiter=',' DSD

8208     ! DROPOVER lrecl=32767;

8209           if _n_ = 1 then        /* write column names or labels */

8210            do;

8211              put

8212                 "NAICS"

8213              ','

8214                 "D"

8215              ','

8216                 "percent1"

8217              ','

8218                 "percent2"

8219              ','

8220                 "percent3"

8221              ','

874                                                        The SAS
System                            15:50 Friday, November 21, 2008

8222                 "percent4"

8223              ','

8224                 "percent5"

8225              ','

8226                 "percent6"

8227              ','

8228                 "percent7"

8229              ','

8230                 "percent8"

8231              ','

8232                 "percent9"

8233              ','

8234                 "percent10"

8235              ','

8236                 "percent11"

8237              ;

8238            end;

8239          set  TEMP.HIGHOUTDATA_IP   end=EFIEOD;

8240              format NAICS $16. ;

8241              format D best12. ;

8242              format percent1 percent8.2 ;

8243              format percent2 percent8.2 ;

8244              format percent3 percent8.2 ;

8245              format percent4 percent8.2 ;

8246              format percent5 percent8.2 ;

8247              format percent6 percent8.2 ;

8248              format percent7 percent8.2 ;

8249              format percent8 percent8.2 ;

8250              format percent9 percent8.2 ;

8251              format percent10 percent8.2 ;

8252              format percent11 percent8.2 ;

8253            do;

8254              EFIOUT + 1;

8255              put NAICS $ @;

8256              put D @;

8257              put percent1 @;

8258              put percent2 @;

8259              put percent3 @;

8260              put percent4 @;

8261              put percent5 @;

8262              put percent6 @;

8263              put percent7 @;

8264              put percent8 @;

8265              put percent9 @;

8266              put percent10 @;

8267              put percent11 ;

8268              ;

8269            end;

8270           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

8271           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

8272           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_IP.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_IP.csv,

875                                                        The SAS
System                            15:50 Friday, November 21, 2008

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:50:35,

      Create Time=21Nov2008:16:50:35

NOTE: 4 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_IP.csv'.

      The minimum record length was 24.

      The maximum record length was 108.

NOTE: There were 3 observations read from the data set
TEMP.HIGHOUTDATA_IP.

NOTE: At least one W.D format was too small for the number to be
printed. The decimal may be shifted by the "BEST" format.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.00 seconds

      

3 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_IP.csv from TEMP.HIGHOUTDATA_IP.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_IP.csv" file was successfully
created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.09 seconds

      cpu time            0.04 seconds

      

8273       
/**********************************************************************

8274        *   PRODUCT:   SAS

8275        *   VERSION:   9.2

8276        *   CREATOR:   External File Interface

8277        *   DATE:      21NOV08

8278        *   DESC:      Generated SAS Datastep Code

8279        *   TEMPLATE SOURCE:  (None Specified.)

8280       
***********************************************************************/

8281           data _null_;

8282           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

8283           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

8284           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_IP.csv' delimiter=',' DSD DROPOVER

8284     ! lrecl=32767;

8285           if _n_ = 1 then        /* write column names or labels */

8286            do;

8287              put

8288                 "P_A"

8289              ','

8290                 "P_100"

8291              ','

8292                 "P_0"

8293              ','

8294                 "P_1"

8295              ','

8296                 "P_2"

8297              ','

8298                 "P_3"

8299              ','

8300                 "P_4"

8301              ','

876                                                        The SAS
System                            15:50 Friday, November 21, 2008

8302                 "P_5"

8303              ','

8304                 "P_6"

8305              ','

8306                 "P_7"

8307              ','

8308                 "P_8"

8309              ','

8310                 "P_9"

8311              ','

8312                 "P_10"

8313              ','

8314                 "P_11"

8315              ','

8316                 "P_12"

8317              ','

8318                 "P_13"

8319              ','

8320                 "P_14"

8321              ','

8322                 "P_15"

8323              ','

8324                 "P_16"

8325              ','

8326                 "P_17"

8327              ','

8328                 "P_18"

8329              ','

8330                 "P_19"

8331              ','

8332                 "P_20"

8333              ','

8334                 "P_21"

8335              ','

8336                 "P_22"

8337              ','

8338                 "P_23"

8339              ','

8340                 "P_24"

8341              ','

8342                 "P_25"

8343              ','

8344                 "P_26"

8345              ','

8346                 "P_27"

8347              ','

8348                 "P_28"

8349              ','

8350                 "P_29"

8351              ','

8352                 "P_30"

8353              ','

8354                 "P_31"

8355              ','

877                                                        The SAS
System                            15:50 Friday, November 21, 2008

8356                 "P_32"

8357              ','

8358                 "P_33"

8359              ','

8360                 "P_34"

8361              ','

8362                 "P_35"

8363              ','

8364                 "P_36"

8365              ','

8366                 "P_37"

8367              ','

8368                 "P_38"

8369              ','

8370                 "P_39"

8371              ','

8372                 "P_40"

8373              ','

8374                 "P_41"

8375              ','

8376                 "P_42"

8377              ','

8378                 "P_43"

8379              ','

8380                 "P_44"

8381              ','

8382                 "P_45"

8383              ','

8384                 "P_46"

8385              ','

8386                 "P_47"

8387              ','

8388                 "P_48"

8389              ','

8390                 "P_49"

8391              ','

8392                 "P_50"

8393              ','

8394                 "P_51"

8395              ','

8396                 "P_52"

8397              ','

8398                 "P_53"

8399              ','

8400                 "P_54"

8401              ','

8402                 "P_55"

8403              ','

8404                 "P_56"

8405              ','

8406                 "P_57"

8407              ','

8408                 "P_58"

8409              ','

878                                                        The SAS
System                            15:50 Friday, November 21, 2008

8410                 "P_59"

8411              ','

8412                 "P_60"

8413              ','

8414                 "P_61"

8415              ','

8416                 "P_62"

8417              ','

8418                 "P_63"

8419              ','

8420                 "P_64"

8421              ','

8422                 "P_65"

8423              ','

8424                 "P_66"

8425              ','

8426                 "P_67"

8427              ','

8428                 "P_68"

8429              ','

8430                 "P_69"

8431              ','

8432                 "P_70"

8433              ','

8434                 "P_71"

8435              ','

8436                 "P_72"

8437              ','

8438                 "P_73"

8439              ','

8440                 "P_74"

8441              ','

8442                 "P_75"

8443              ','

8444                 "P_76"

8445              ','

8446                 "P_77"

8447              ','

8448                 "P_78"

8449              ','

8450                 "P_79"

8451              ','

8452                 "P_80"

8453              ','

8454                 "P_81"

8455              ','

8456                 "P_82"

8457              ','

8458                 "P_83"

8459              ','

8460                 "P_84"

8461              ','

8462                 "P_85"

8463              ','

879                                                        The SAS
System                            15:50 Friday, November 21, 2008

8464                 "P_86"

8465              ','

8466                 "P_87"

8467              ','

8468                 "P_88"

8469              ','

8470                 "P_89"

8471              ','

8472                 "P_90"

8473              ','

8474                 "P_91"

8475              ','

8476                 "P_92"

8477              ','

8478                 "P_93"

8479              ','

8480                 "P_94"

8481              ','

8482                 "P_95"

8483              ','

8484                 "P_96"

8485              ','

8486                 "P_97"

8487              ','

8488                 "P_98"

8489              ','

8490                 "P_99"

8491              ;

8492            end;

8493          set  TEMP4.HIGH_IP   end=EFIEOD;

8494              format P_A best12. ;

8495              format P_100 best12. ;

8496              format P_0 best12. ;

8497              format P_1 best12. ;

8498              format P_2 best12. ;

8499              format P_3 best12. ;

8500              format P_4 best12. ;

8501              format P_5 best12. ;

8502              format P_6 best12. ;

8503              format P_7 best12. ;

8504              format P_8 best12. ;

8505              format P_9 best12. ;

8506              format P_10 best12. ;

8507              format P_11 best12. ;

8508              format P_12 best12. ;

8509              format P_13 best12. ;

8510              format P_14 best12. ;

8511              format P_15 best12. ;

8512              format P_16 best12. ;

8513              format P_17 best12. ;

8514              format P_18 best12. ;

8515              format P_19 best12. ;

8516              format P_20 best12. ;

8517              format P_21 best12. ;

880                                                        The SAS
System                            15:50 Friday, November 21, 2008

8518              format P_22 best12. ;

8519              format P_23 best12. ;

8520              format P_24 best12. ;

8521              format P_25 best12. ;

8522              format P_26 best12. ;

8523              format P_27 best12. ;

8524              format P_28 best12. ;

8525              format P_29 best12. ;

8526              format P_30 best12. ;

8527              format P_31 best12. ;

8528              format P_32 best12. ;

8529              format P_33 best12. ;

8530              format P_34 best12. ;

8531              format P_35 best12. ;

8532              format P_36 best12. ;

8533              format P_37 best12. ;

8534              format P_38 best12. ;

8535              format P_39 best12. ;

8536              format P_40 best12. ;

8537              format P_41 best12. ;

8538              format P_42 best12. ;

8539              format P_43 best12. ;

8540              format P_44 best12. ;

8541              format P_45 best12. ;

8542              format P_46 best12. ;

8543              format P_47 best12. ;

8544              format P_48 best12. ;

8545              format P_49 best12. ;

8546              format P_50 best12. ;

8547              format P_51 best12. ;

8548              format P_52 best12. ;

8549              format P_53 best12. ;

8550              format P_54 best12. ;

8551              format P_55 best12. ;

8552              format P_56 best12. ;

8553              format P_57 best12. ;

8554              format P_58 best12. ;

8555              format P_59 best12. ;

8556              format P_60 best12. ;

8557              format P_61 best12. ;

8558              format P_62 best12. ;

8559              format P_63 best12. ;

8560              format P_64 best12. ;

8561              format P_65 best12. ;

8562              format P_66 best12. ;

8563              format P_67 best12. ;

8564              format P_68 best12. ;

8565              format P_69 best12. ;

8566              format P_70 best12. ;

8567              format P_71 best12. ;

8568              format P_72 best12. ;

8569              format P_73 best12. ;

8570              format P_74 best12. ;

8571              format P_75 best12. ;

881                                                        The SAS
System                            15:50 Friday, November 21, 2008

8572              format P_76 best12. ;

8573              format P_77 best12. ;

8574              format P_78 best12. ;

8575              format P_79 best12. ;

8576              format P_80 best12. ;

8577              format P_81 best12. ;

8578              format P_82 best12. ;

8579              format P_83 best12. ;

8580              format P_84 best12. ;

8581              format P_85 best12. ;

8582              format P_86 best12. ;

8583              format P_87 best12. ;

8584              format P_88 best12. ;

8585              format P_89 best12. ;

8586              format P_90 best12. ;

8587              format P_91 best12. ;

8588              format P_92 best12. ;

8589              format P_93 best12. ;

8590              format P_94 best12. ;

8591              format P_95 best12. ;

8592              format P_96 best12. ;

8593              format P_97 best12. ;

8594              format P_98 best12. ;

8595              format P_99 best12. ;

8596            do;

8597              EFIOUT + 1;

8598              put P_A @;

8599              put P_100 @;

8600              put P_0 @;

8601              put P_1 @;

8602              put P_2 @;

8603              put P_3 @;

8604              put P_4 @;

8605              put P_5 @;

8606              put P_6 @;

8607              put P_7 @;

8608              put P_8 @;

8609              put P_9 @;

8610              put P_10 @;

8611              put P_11 @;

8612              put P_12 @;

8613              put P_13 @;

8614              put P_14 @;

8615              put P_15 @;

8616              put P_16 @;

8617              put P_17 @;

8618              put P_18 @;

8619              put P_19 @;

8620              put P_20 @;

8621              put P_21 @;

8622              put P_22 @;

8623              put P_23 @;

8624              put P_24 @;

8625              put P_25 @;

882                                                        The SAS
System                            15:50 Friday, November 21, 2008

8626              put P_26 @;

8627              put P_27 @;

8628              put P_28 @;

8629              put P_29 @;

8630              put P_30 @;

8631              put P_31 @;

8632              put P_32 @;

8633              put P_33 @;

8634              put P_34 @;

8635              put P_35 @;

8636              put P_36 @;

8637              put P_37 @;

8638              put P_38 @;

8639              put P_39 @;

8640              put P_40 @;

8641              put P_41 @;

8642              put P_42 @;

8643              put P_43 @;

8644              put P_44 @;

8645              put P_45 @;

8646              put P_46 @;

8647              put P_47 @;

8648              put P_48 @;

8649              put P_49 @;

8650              put P_50 @;

8651              put P_51 @;

8652              put P_52 @;

8653              put P_53 @;

8654              put P_54 @;

8655              put P_55 @;

8656              put P_56 @;

8657              put P_57 @;

8658              put P_58 @;

8659              put P_59 @;

8660              put P_60 @;

8661              put P_61 @;

8662              put P_62 @;

8663              put P_63 @;

8664              put P_64 @;

8665              put P_65 @;

8666              put P_66 @;

8667              put P_67 @;

8668              put P_68 @;

8669              put P_69 @;

8670              put P_70 @;

8671              put P_71 @;

8672              put P_72 @;

8673              put P_73 @;

8674              put P_74 @;

8675              put P_75 @;

8676              put P_76 @;

8677              put P_77 @;

8678              put P_78 @;

8679              put P_79 @;

883                                                        The SAS
System                            15:50 Friday, November 21, 2008

8680              put P_80 @;

8681              put P_81 @;

8682              put P_82 @;

8683              put P_83 @;

8684              put P_84 @;

8685              put P_85 @;

8686              put P_86 @;

8687              put P_87 @;

8688              put P_88 @;

8689              put P_89 @;

8690              put P_90 @;

8691              put P_91 @;

8692              put P_92 @;

8693              put P_93 @;

8694              put P_94 @;

8695              put P_95 @;

8696              put P_96 @;

8697              put P_97 @;

8698              put P_98 @;

8699              put P_99 ;

8700              ;

8701            end;

8702           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

8703           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

8704           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_IP.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_IP.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:50:35,

      Create Time=21Nov2008:16:50:35

NOTE: 2 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_IP.csv'.

      The minimum record length was 499.

      The maximum record length was 1317.

NOTE: There were 1 observations read from the data set TEMP4.HIGH_IP.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

1 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_IP.csv from TEMP4.HIGH_IP.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_IP.csv" file was successfully created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.07 seconds

      cpu time            0.07 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: Deleting WORK.D10 (memtype=DATA).

NOTE: Deleting WORK.D11 (memtype=DATA).

NOTE: Deleting WORK.D2 (memtype=DATA).

884                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.D3 (memtype=DATA).

NOTE: Deleting WORK.D4 (memtype=DATA).

NOTE: Deleting WORK.D5 (memtype=DATA).

NOTE: Deleting WORK.D6 (memtype=DATA).

NOTE: Deleting WORK.D7 (memtype=DATA).

NOTE: Deleting WORK.D8 (memtype=DATA).

NOTE: Deleting WORK.D9 (memtype=DATA).

NOTE: Deleting WORK.X (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Copying TEMP3.HIGHCOMM3 to WORK.HIGHCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHCOMM3.

NOTE: The data set WORK.HIGHCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHCRUISE3 to WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHCRUISE3.

NOTE: The data set WORK.HIGHCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFBARGE3 to WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFBARGE3.

NOTE: The data set WORK.HIGHFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFSHIPS3 to WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFSHIPS3.

NOTE: The data set WORK.HIGHFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHPASS3 to WORK.HIGHPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHPASS3.

NOTE: The data set WORK.HIGHPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHREC3 to WORK.HIGHREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHREC3.

NOTE: The data set WORK.HIGHREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.HIGHTBARGE3 to WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTBARGE3.

NOTE: The data set WORK.HIGHTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHTSHIPS3 to WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTSHIPS3.

NOTE: The data set WORK.HIGHTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHUTILITY3 to WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHUTILITY3.

NOTE: The data set WORK.HIGHUTILITY3 has 11 observations and 1
variables.

NOTE: Copying TEMP3.LOWCOMM3 to WORK.LOWCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWCOMM3.

NOTE: The data set WORK.LOWCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWCRUISE3 to WORK.LOWCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWCRUISE3.

NOTE: The data set WORK.LOWCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFBARGE3 to WORK.LOWFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFBARGE3.

NOTE: The data set WORK.LOWFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFSHIPS3 to WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFSHIPS3.

NOTE: The data set WORK.LOWFSHIPS3 has 11 observations and 1 variables.

885                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Copying TEMP3.LOWPASS3 to WORK.LOWPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWPASS3.

NOTE: The data set WORK.LOWPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWREC3 to WORK.LOWREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWREC3.

NOTE: The data set WORK.LOWREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.LOWTBARGE3 to WORK.LOWTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTBARGE3.

NOTE: The data set WORK.LOWTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWTSHIPS3 to WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTSHIPS3.

NOTE: The data set WORK.LOWTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWUTILITY3 to WORK.LOWUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWUTILITY3.

NOTE: The data set WORK.LOWUTILITY3 has 11 observations and 1 variables.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting TEMP.HIGHOUTDATA_IP (memtype=DATA).

NOTE: Deleting TEMP.HIGH_IP (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.N (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: The file WORK.D1 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A1 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

886                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A1 to WORK.D1.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 11 observations read from the data set WORK.A1.

NOTE: The data set WORK.D1 has 11 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A2 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A2 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A2.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 22 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

887                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A3 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A3.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 33 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A4 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A4.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 44 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

888                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A5 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A5.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 55 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

889                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A6 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A6.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 66 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A7 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A7.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 77 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

890                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A8 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A8.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 88 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A9 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

891                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A9 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A9.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 99 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A10 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A10 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A10.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 110 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

892                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A11 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A11.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 121 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D1A (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A1 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

893                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D1A.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 121 observations read from the data set WORK.A1.

NOTE: The data set WORK.D1A has 121 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A2 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A2.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 242 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

894                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A3 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A3.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 363 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A4 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A4.

895                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 484 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A5 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A5 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A5.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 605 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

896                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A6 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A6.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 726 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A7 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A7.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 847 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

897                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A8 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A8 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A8.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 968 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A9 has 121 observations and 3 variables.

898                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A9.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 1089 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A10 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A10.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 1210 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

899                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A11 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A11.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 1331 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D2 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

900                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A1 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D2.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 1331 observations read from the data set WORK.A1.

NOTE: The data set WORK.D2 has 1331 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A2 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A2.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 2662 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

901                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A3 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A3.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 3993 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

902                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A4 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A4.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 5324 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A5 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A5.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 6655 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

903                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A6 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A6.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 7986 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A7 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

904                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Appending WORK.A7 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A7.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 9317 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A8 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A8.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 10648 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

905                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A9 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A9.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 11979 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A10 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A10 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A10.

NOTE: 1331 observations added.

906                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.D2 has 13310 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A11 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A11.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 14641 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D1A (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

907                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The file WORK.D1B (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D7 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set TEMP.HIGH_SS has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.D2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D6 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D3 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D9 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D10 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

908                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The file WORK.D4 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D8 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D5 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.HIGHCOMM3 (memtype=DATA).

NOTE: Deleting WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHPASS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHREC3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.LOWCOMM3 (memtype=DATA).

NOTE: Deleting WORK.LOWCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWPASS3 (memtype=DATA).

NOTE: Deleting WORK.LOWREC3 (memtype=DATA).

NOTE: Deleting WORK.LOWTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.LARGE2 created, with 14641 rows and 14 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Variable cs_cost is uninitialized.

909                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Variable cf_cost is uninitialized.

NOTE: Variable rs_cost is uninitialized.

NOTE: Variable tb_cost is uninitialized.

NOTE: Variable ts_cost is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      14641 at 8704:140   14641 at 8704:164   14641 at 8704:16    14641
at 8704:40    14641 at 8704:64    

NOTE: There were 14641 observations read from the data set WORK.LARGE2.

NOTE: The data set WORK.LARGE3 has 14641 observations and 20 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.LARGE2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.LARGE3A created, with 14641 rows and 31 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.LARGE3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 14641 observations read from the data set WORK.LARGE3A.

NOTE: The data set WORK.LARGE3B has 14641 observations and 43 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.LARGE3A (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.LARGE4 created, with 14641 rows and 34 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.03 seconds

910                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.03 seconds

      

NOTE: There were 14641 observations read from the data set WORK.LARGE4.

NOTE: The data set TEMP4.LARGE4 has 14641 observations and 34 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE3B (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 14641 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L1 has 14641 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 14641 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L2 has 14641 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 14641 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L3 has 14641 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 14641 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L4 has 14641 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 14641 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L5 has 14641 observations and 2 variables.

NOTE: DATA statement used (Total process time):

911                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 14641 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L6 has 14641 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 14641 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L7 has 14641 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 14641 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L8 has 14641 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 14641 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L9 has 14641 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 14641 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L10 has 14641 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 14641 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L11 has 14641 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 14641 observations read from the data set WORK.L1.

NOTE: There were 14641 observations read from the data set WORK.L2.

912                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 14641 observations read from the data set WORK.L3.

NOTE: There were 14641 observations read from the data set WORK.L4.

NOTE: There were 14641 observations read from the data set WORK.L5.

NOTE: There were 14641 observations read from the data set WORK.L6.

NOTE: There were 14641 observations read from the data set WORK.L7.

NOTE: There were 14641 observations read from the data set WORK.L8.

NOTE: There were 14641 observations read from the data set WORK.L9.

NOTE: There were 14641 observations read from the data set WORK.L10.

NOTE: There were 14641 observations read from the data set WORK.L11.

NOTE: The data set WORK.L has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.L1 (memtype=DATA).

NOTE: Deleting WORK.L2 (memtype=DATA).

NOTE: Deleting WORK.L3 (memtype=DATA).

NOTE: Deleting WORK.L4 (memtype=DATA).

NOTE: Deleting WORK.L5 (memtype=DATA).

NOTE: Deleting WORK.L6 (memtype=DATA).

NOTE: Deleting WORK.L7 (memtype=DATA).

NOTE: Deleting WORK.L8 (memtype=DATA).

NOTE: Deleting WORK.L9 (memtype=DATA).

NOTE: Deleting WORK.L10 (memtype=DATA).

NOTE: Deleting WORK.L11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 161051 observations read from the data set WORK.L.

NOTE: The data set WORK.L has 161051 observations and 2 variables.

NOTE: PROCEDURE SORT used (Total process time):

      real time           0.04 seconds

      cpu time            0.12 seconds

      

NOTE: The data set TEMP4.HIGH_SS has 1 observations and 102 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: Deleting WORK.L (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

913                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 14641 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.LARGE5 has 14641 observations and 46 variables.

NOTE: DATA statement used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.LARGE4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D1 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D2 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D3 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D4 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.40 seconds

      cpu time            0.01 seconds

      

914                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D5 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D6 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D7 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D8 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D9 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D10 created, with 1 rows and 3 columns.

915                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D11 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.LARGE5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 2 observations read from the data set WORK.D1.

NOTE: There were 2 observations read from the data set WORK.D2.

NOTE: There were 1 observations read from the data set WORK.D3.

NOTE: There were 2 observations read from the data set WORK.D4.

NOTE: There were 2 observations read from the data set WORK.D5.

NOTE: There were 2 observations read from the data set WORK.D6.

NOTE: There were 2 observations read from the data set WORK.D7.

NOTE: There were 1 observations read from the data set WORK.D8.

NOTE: There were 1 observations read from the data set WORK.D9.

NOTE: There were 1 observations read from the data set WORK.D10.

NOTE: There were 1 observations read from the data set WORK.D11.

NOTE: The data set TEMP.HIGHOUTDATA_SS has 3 observations and 13
variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

8705       
/**********************************************************************

8706        *   PRODUCT:   SAS

8707        *   VERSION:   9.2

8708        *   CREATOR:   External File Interface

8709        *   DATE:      21NOV08

8710        *   DESC:      Generated SAS Datastep Code

8711        *   TEMPLATE SOURCE:  (None Specified.)

8712       
***********************************************************************/

8713           data _null_;

8714           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

8715           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

8716           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_SS.csv' delimiter=',' DSD

916                                                        The SAS
System                            15:50 Friday, November 21, 2008

8716     ! DROPOVER lrecl=32767;

8717           if _n_ = 1 then        /* write column names or labels */

8718            do;

8719              put

8720                 "NAICS"

8721              ','

8722                 "D"

8723              ','

8724                 "percent1"

8725              ','

8726                 "percent2"

8727              ','

8728                 "percent3"

8729              ','

8730                 "percent4"

8731              ','

8732                 "percent5"

8733              ','

8734                 "percent6"

8735              ','

8736                 "percent7"

8737              ','

8738                 "percent8"

8739              ','

8740                 "percent9"

8741              ','

8742                 "percent10"

8743              ','

8744                 "percent11"

8745              ;

8746            end;

8747          set  TEMP.HIGHOUTDATA_SS   end=EFIEOD;

8748              format NAICS $16. ;

8749              format D best12. ;

8750              format percent1 percent8.2 ;

8751              format percent2 percent8.2 ;

8752              format percent3 percent8.2 ;

8753              format percent4 percent8.2 ;

8754              format percent5 percent8.2 ;

8755              format percent6 percent8.2 ;

8756              format percent7 percent8.2 ;

8757              format percent8 percent8.2 ;

8758              format percent9 percent8.2 ;

8759              format percent10 percent8.2 ;

8760              format percent11 percent8.2 ;

8761            do;

8762              EFIOUT + 1;

8763              put NAICS $ @;

8764              put D @;

8765              put percent1 @;

8766              put percent2 @;

8767              put percent3 @;

8768              put percent4 @;

8769              put percent5 @;

917                                                        The SAS
System                            15:50 Friday, November 21, 2008

8770              put percent6 @;

8771              put percent7 @;

8772              put percent8 @;

8773              put percent9 @;

8774              put percent10 @;

8775              put percent11 ;

8776              ;

8777            end;

8778           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

8779           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

8780           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_SS.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_SS.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:50:36,

      Create Time=21Nov2008:16:50:36

NOTE: 4 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_SS.csv'.

      The minimum record length was 24.

      The maximum record length was 108.

NOTE: There were 3 observations read from the data set
TEMP.HIGHOUTDATA_SS.

NOTE: At least one W.D format was too small for the number to be
printed. The decimal may be shifted by the "BEST" format.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

3 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_SS.csv from TEMP.HIGHOUTDATA_SS.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_SS.csv" file was successfully
created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

8781       
/**********************************************************************

8782        *   PRODUCT:   SAS

8783        *   VERSION:   9.2

8784        *   CREATOR:   External File Interface

8785        *   DATE:      21NOV08

8786        *   DESC:      Generated SAS Datastep Code

8787        *   TEMPLATE SOURCE:  (None Specified.)

8788       
***********************************************************************/

8789           data _null_;

8790           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

8791           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

8792           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_SS.csv' delimiter=',' DSD DROPOVER

8792     ! lrecl=32767;

8793           if _n_ = 1 then        /* write column names or labels */

8794            do;

8795              put

918                                                        The SAS
System                            15:50 Friday, November 21, 2008

8796                 "P_A"

8797              ','

8798                 "P_100"

8799              ','

8800                 "P_0"

8801              ','

8802                 "P_1"

8803              ','

8804                 "P_2"

8805              ','

8806                 "P_3"

8807              ','

8808                 "P_4"

8809              ','

8810                 "P_5"

8811              ','

8812                 "P_6"

8813              ','

8814                 "P_7"

8815              ','

8816                 "P_8"

8817              ','

8818                 "P_9"

8819              ','

8820                 "P_10"

8821              ','

8822                 "P_11"

8823              ','

8824                 "P_12"

8825              ','

8826                 "P_13"

8827              ','

8828                 "P_14"

8829              ','

8830                 "P_15"

8831              ','

8832                 "P_16"

8833              ','

8834                 "P_17"

8835              ','

8836                 "P_18"

8837              ','

8838                 "P_19"

8839              ','

8840                 "P_20"

8841              ','

8842                 "P_21"

8843              ','

8844                 "P_22"

8845              ','

8846                 "P_23"

8847              ','

8848                 "P_24"

8849              ','

919                                                        The SAS
System                            15:50 Friday, November 21, 2008

8850                 "P_25"

8851              ','

8852                 "P_26"

8853              ','

8854                 "P_27"

8855              ','

8856                 "P_28"

8857              ','

8858                 "P_29"

8859              ','

8860                 "P_30"

8861              ','

8862                 "P_31"

8863              ','

8864                 "P_32"

8865              ','

8866                 "P_33"

8867              ','

8868                 "P_34"

8869              ','

8870                 "P_35"

8871              ','

8872                 "P_36"

8873              ','

8874                 "P_37"

8875              ','

8876                 "P_38"

8877              ','

8878                 "P_39"

8879              ','

8880                 "P_40"

8881              ','

8882                 "P_41"

8883              ','

8884                 "P_42"

8885              ','

8886                 "P_43"

8887              ','

8888                 "P_44"

8889              ','

8890                 "P_45"

8891              ','

8892                 "P_46"

8893              ','

8894                 "P_47"

8895              ','

8896                 "P_48"

8897              ','

8898                 "P_49"

8899              ','

8900                 "P_50"

8901              ','

8902                 "P_51"

8903              ','

920                                                        The SAS
System                            15:50 Friday, November 21, 2008

8904                 "P_52"

8905              ','

8906                 "P_53"

8907              ','

8908                 "P_54"

8909              ','

8910                 "P_55"

8911              ','

8912                 "P_56"

8913              ','

8914                 "P_57"

8915              ','

8916                 "P_58"

8917              ','

8918                 "P_59"

8919              ','

8920                 "P_60"

8921              ','

8922                 "P_61"

8923              ','

8924                 "P_62"

8925              ','

8926                 "P_63"

8927              ','

8928                 "P_64"

8929              ','

8930                 "P_65"

8931              ','

8932                 "P_66"

8933              ','

8934                 "P_67"

8935              ','

8936                 "P_68"

8937              ','

8938                 "P_69"

8939              ','

8940                 "P_70"

8941              ','

8942                 "P_71"

8943              ','

8944                 "P_72"

8945              ','

8946                 "P_73"

8947              ','

8948                 "P_74"

8949              ','

8950                 "P_75"

8951              ','

8952                 "P_76"

8953              ','

8954                 "P_77"

8955              ','

8956                 "P_78"

8957              ','

921                                                        The SAS
System                            15:50 Friday, November 21, 2008

8958                 "P_79"

8959              ','

8960                 "P_80"

8961              ','

8962                 "P_81"

8963              ','

8964                 "P_82"

8965              ','

8966                 "P_83"

8967              ','

8968                 "P_84"

8969              ','

8970                 "P_85"

8971              ','

8972                 "P_86"

8973              ','

8974                 "P_87"

8975              ','

8976                 "P_88"

8977              ','

8978                 "P_89"

8979              ','

8980                 "P_90"

8981              ','

8982                 "P_91"

8983              ','

8984                 "P_92"

8985              ','

8986                 "P_93"

8987              ','

8988                 "P_94"

8989              ','

8990                 "P_95"

8991              ','

8992                 "P_96"

8993              ','

8994                 "P_97"

8995              ','

8996                 "P_98"

8997              ','

8998                 "P_99"

8999              ;

9000            end;

9001          set  TEMP4.HIGH_SS   end=EFIEOD;

9002              format P_A best12. ;

9003              format P_100 best12. ;

9004              format P_0 best12. ;

9005              format P_1 best12. ;

9006              format P_2 best12. ;

9007              format P_3 best12. ;

9008              format P_4 best12. ;

9009              format P_5 best12. ;

9010              format P_6 best12. ;

9011              format P_7 best12. ;

922                                                        The SAS
System                            15:50 Friday, November 21, 2008

9012              format P_8 best12. ;

9013              format P_9 best12. ;

9014              format P_10 best12. ;

9015              format P_11 best12. ;

9016              format P_12 best12. ;

9017              format P_13 best12. ;

9018              format P_14 best12. ;

9019              format P_15 best12. ;

9020              format P_16 best12. ;

9021              format P_17 best12. ;

9022              format P_18 best12. ;

9023              format P_19 best12. ;

9024              format P_20 best12. ;

9025              format P_21 best12. ;

9026              format P_22 best12. ;

9027              format P_23 best12. ;

9028              format P_24 best12. ;

9029              format P_25 best12. ;

9030              format P_26 best12. ;

9031              format P_27 best12. ;

9032              format P_28 best12. ;

9033              format P_29 best12. ;

9034              format P_30 best12. ;

9035              format P_31 best12. ;

9036              format P_32 best12. ;

9037              format P_33 best12. ;

9038              format P_34 best12. ;

9039              format P_35 best12. ;

9040              format P_36 best12. ;

9041              format P_37 best12. ;

9042              format P_38 best12. ;

9043              format P_39 best12. ;

9044              format P_40 best12. ;

9045              format P_41 best12. ;

9046              format P_42 best12. ;

9047              format P_43 best12. ;

9048              format P_44 best12. ;

9049              format P_45 best12. ;

9050              format P_46 best12. ;

9051              format P_47 best12. ;

9052              format P_48 best12. ;

9053              format P_49 best12. ;

9054              format P_50 best12. ;

9055              format P_51 best12. ;

9056              format P_52 best12. ;

9057              format P_53 best12. ;

9058              format P_54 best12. ;

9059              format P_55 best12. ;

9060              format P_56 best12. ;

9061              format P_57 best12. ;

9062              format P_58 best12. ;

9063              format P_59 best12. ;

9064              format P_60 best12. ;

9065              format P_61 best12. ;

923                                                        The SAS
System                            15:50 Friday, November 21, 2008

9066              format P_62 best12. ;

9067              format P_63 best12. ;

9068              format P_64 best12. ;

9069              format P_65 best12. ;

9070              format P_66 best12. ;

9071              format P_67 best12. ;

9072              format P_68 best12. ;

9073              format P_69 best12. ;

9074              format P_70 best12. ;

9075              format P_71 best12. ;

9076              format P_72 best12. ;

9077              format P_73 best12. ;

9078              format P_74 best12. ;

9079              format P_75 best12. ;

9080              format P_76 best12. ;

9081              format P_77 best12. ;

9082              format P_78 best12. ;

9083              format P_79 best12. ;

9084              format P_80 best12. ;

9085              format P_81 best12. ;

9086              format P_82 best12. ;

9087              format P_83 best12. ;

9088              format P_84 best12. ;

9089              format P_85 best12. ;

9090              format P_86 best12. ;

9091              format P_87 best12. ;

9092              format P_88 best12. ;

9093              format P_89 best12. ;

9094              format P_90 best12. ;

9095              format P_91 best12. ;

9096              format P_92 best12. ;

9097              format P_93 best12. ;

9098              format P_94 best12. ;

9099              format P_95 best12. ;

9100              format P_96 best12. ;

9101              format P_97 best12. ;

9102              format P_98 best12. ;

9103              format P_99 best12. ;

9104            do;

9105              EFIOUT + 1;

9106              put P_A @;

9107              put P_100 @;

9108              put P_0 @;

9109              put P_1 @;

9110              put P_2 @;

9111              put P_3 @;

9112              put P_4 @;

9113              put P_5 @;

9114              put P_6 @;

9115              put P_7 @;

9116              put P_8 @;

9117              put P_9 @;

9118              put P_10 @;

9119              put P_11 @;

924                                                        The SAS
System                            15:50 Friday, November 21, 2008

9120              put P_12 @;

9121              put P_13 @;

9122              put P_14 @;

9123              put P_15 @;

9124              put P_16 @;

9125              put P_17 @;

9126              put P_18 @;

9127              put P_19 @;

9128              put P_20 @;

9129              put P_21 @;

9130              put P_22 @;

9131              put P_23 @;

9132              put P_24 @;

9133              put P_25 @;

9134              put P_26 @;

9135              put P_27 @;

9136              put P_28 @;

9137              put P_29 @;

9138              put P_30 @;

9139              put P_31 @;

9140              put P_32 @;

9141              put P_33 @;

9142              put P_34 @;

9143              put P_35 @;

9144              put P_36 @;

9145              put P_37 @;

9146              put P_38 @;

9147              put P_39 @;

9148              put P_40 @;

9149              put P_41 @;

9150              put P_42 @;

9151              put P_43 @;

9152              put P_44 @;

9153              put P_45 @;

9154              put P_46 @;

9155              put P_47 @;

9156              put P_48 @;

9157              put P_49 @;

9158              put P_50 @;

9159              put P_51 @;

9160              put P_52 @;

9161              put P_53 @;

9162              put P_54 @;

9163              put P_55 @;

9164              put P_56 @;

9165              put P_57 @;

9166              put P_58 @;

9167              put P_59 @;

9168              put P_60 @;

9169              put P_61 @;

9170              put P_62 @;

9171              put P_63 @;

9172              put P_64 @;

9173              put P_65 @;

925                                                        The SAS
System                            15:50 Friday, November 21, 2008

9174              put P_66 @;

9175              put P_67 @;

9176              put P_68 @;

9177              put P_69 @;

9178              put P_70 @;

9179              put P_71 @;

9180              put P_72 @;

9181              put P_73 @;

9182              put P_74 @;

9183              put P_75 @;

9184              put P_76 @;

9185              put P_77 @;

9186              put P_78 @;

9187              put P_79 @;

9188              put P_80 @;

9189              put P_81 @;

9190              put P_82 @;

9191              put P_83 @;

9192              put P_84 @;

9193              put P_85 @;

9194              put P_86 @;

9195              put P_87 @;

9196              put P_88 @;

9197              put P_89 @;

9198              put P_90 @;

9199              put P_91 @;

9200              put P_92 @;

9201              put P_93 @;

9202              put P_94 @;

9203              put P_95 @;

9204              put P_96 @;

9205              put P_97 @;

9206              put P_98 @;

9207              put P_99 ;

9208              ;

9209            end;

9210           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

9211           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

9212           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_SS.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_SS.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:50:37,

      Create Time=21Nov2008:16:50:37

NOTE: 2 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_SS.csv'.

      The minimum record length was 499.

      The maximum record length was 1312.

NOTE: There were 1 observations read from the data set TEMP4.HIGH_SS.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

926                                                        The SAS
System                            15:50 Friday, November 21, 2008

1 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_SS.csv from TEMP4.HIGH_SS.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_SS.csv" file was successfully created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: Deleting WORK.D10 (memtype=DATA).

NOTE: Deleting WORK.D11 (memtype=DATA).

NOTE: Deleting WORK.D2 (memtype=DATA).

NOTE: Deleting WORK.D3 (memtype=DATA).

NOTE: Deleting WORK.D4 (memtype=DATA).

NOTE: Deleting WORK.D5 (memtype=DATA).

NOTE: Deleting WORK.D6 (memtype=DATA).

NOTE: Deleting WORK.D7 (memtype=DATA).

NOTE: Deleting WORK.D8 (memtype=DATA).

NOTE: Deleting WORK.D9 (memtype=DATA).

NOTE: Deleting WORK.X (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: Copying TEMP3.HIGHCOMM3 to WORK.HIGHCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHCOMM3.

NOTE: The data set WORK.HIGHCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHCRUISE3 to WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHCRUISE3.

NOTE: The data set WORK.HIGHCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFBARGE3 to WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFBARGE3.

NOTE: The data set WORK.HIGHFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFSHIPS3 to WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFSHIPS3.

NOTE: The data set WORK.HIGHFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHPASS3 to WORK.HIGHPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHPASS3.

NOTE: The data set WORK.HIGHPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHREC3 to WORK.HIGHREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHREC3.

NOTE: The data set WORK.HIGHREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.HIGHTBARGE3 to WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTBARGE3.

NOTE: The data set WORK.HIGHTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHTSHIPS3 to WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTSHIPS3.

NOTE: The data set WORK.HIGHTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHUTILITY3 to WORK.HIGHUTILITY3 (memtype=DATA).

927                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set
TEMP3.HIGHUTILITY3.

NOTE: The data set WORK.HIGHUTILITY3 has 11 observations and 1
variables.

NOTE: Copying TEMP3.LOWCOMM3 to WORK.LOWCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWCOMM3.

NOTE: The data set WORK.LOWCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWCRUISE3 to WORK.LOWCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWCRUISE3.

NOTE: The data set WORK.LOWCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFBARGE3 to WORK.LOWFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFBARGE3.

NOTE: The data set WORK.LOWFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFSHIPS3 to WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFSHIPS3.

NOTE: The data set WORK.LOWFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWPASS3 to WORK.LOWPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWPASS3.

NOTE: The data set WORK.LOWPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWREC3 to WORK.LOWREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWREC3.

NOTE: The data set WORK.LOWREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.LOWTBARGE3 to WORK.LOWTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTBARGE3.

NOTE: The data set WORK.LOWTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWTSHIPS3 to WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTSHIPS3.

NOTE: The data set WORK.LOWTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWUTILITY3 to WORK.LOWUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWUTILITY3.

NOTE: The data set WORK.LOWUTILITY3 has 11 observations and 1 variables.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting TEMP.HIGHOUTDATA_SS (memtype=DATA).

NOTE: Deleting TEMP.HIGH_SS (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table TEMP.HIGH_PH created, with 11 rows and 2 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D1 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

928                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: The file WORK.D1A (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D1B (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D7 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D2 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D6 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D3 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D9 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D10 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

929                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: The file WORK.D4 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D8 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D5 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.HIGHCOMM3 (memtype=DATA).

NOTE: Deleting WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHPASS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHREC3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.LOWCOMM3 (memtype=DATA).

NOTE: Deleting WORK.LOWCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWPASS3 (memtype=DATA).

NOTE: Deleting WORK.LOWREC3 (memtype=DATA).

NOTE: Deleting WORK.LOWTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWUTILITY3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.LARGE2 created, with 11 rows and 11 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

930                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Variable cs_cost is uninitialized.

NOTE: Variable cf_cost is uninitialized.

NOTE: Variable fb_cost is uninitialized.

NOTE: Variable fs_cost is uninitialized.

NOTE: Variable pv_cost is uninitialized.

NOTE: Variable rs_cost is uninitialized.

NOTE: Variable tb_cost is uninitialized.

NOTE: Variable ts_cost is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      11 at 9212:140   11 at 9212:164   11 at 9212:188   11 at 9212:212 
 11 at 9212:236   11 at 9212:16    11 at 9212:40

      11 at 9212:64    

NOTE: There were 11 observations read from the data set WORK.LARGE2.

NOTE: The data set WORK.LARGE3 has 11 observations and 20 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.LARGE3A created, with 11 rows and 31 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE3A.

NOTE: The data set WORK.LARGE3B has 11 observations and 43 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE3A (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

931                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Table WORK.LARGE4 created, with 11 rows and 34 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set TEMP4.LARGE4 has 11 observations and 34 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE3B (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L1 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L2 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L3 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L4 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

932                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L5 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L6 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L7 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L8 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L9 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L10 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L11 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

933                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.L1.

NOTE: There were 11 observations read from the data set WORK.L2.

NOTE: There were 11 observations read from the data set WORK.L3.

NOTE: There were 11 observations read from the data set WORK.L4.

NOTE: There were 11 observations read from the data set WORK.L5.

NOTE: There were 11 observations read from the data set WORK.L6.

NOTE: There were 11 observations read from the data set WORK.L7.

NOTE: There were 11 observations read from the data set WORK.L8.

NOTE: There were 11 observations read from the data set WORK.L9.

NOTE: There were 11 observations read from the data set WORK.L10.

NOTE: There were 11 observations read from the data set WORK.L11.

NOTE: The data set WORK.L has 121 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.L1 (memtype=DATA).

NOTE: Deleting WORK.L2 (memtype=DATA).

NOTE: Deleting WORK.L3 (memtype=DATA).

NOTE: Deleting WORK.L4 (memtype=DATA).

NOTE: Deleting WORK.L5 (memtype=DATA).

NOTE: Deleting WORK.L6 (memtype=DATA).

NOTE: Deleting WORK.L7 (memtype=DATA).

NOTE: Deleting WORK.L8 (memtype=DATA).

NOTE: Deleting WORK.L9 (memtype=DATA).

NOTE: Deleting WORK.L10 (memtype=DATA).

NOTE: Deleting WORK.L11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 121 observations read from the data set WORK.L.

NOTE: The data set WORK.L has 121 observations and 2 variables.

NOTE: PROCEDURE SORT used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The data set TEMP4.HIGH_PH has 1 observations and 102 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.L (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

934                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.LARGE5 has 11 observations and 46 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D1 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D2 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D3 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D4 created, with 1 rows and 3 columns.

935                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D5 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D6 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D7 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D8 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D9 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

936                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D10 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D11 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.LARGE5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: There were 2 observations read from the data set WORK.D1.

NOTE: There were 2 observations read from the data set WORK.D2.

NOTE: There were 2 observations read from the data set WORK.D3.

NOTE: There were 1 observations read from the data set WORK.D4.

NOTE: There were 1 observations read from the data set WORK.D5.

NOTE: There were 1 observations read from the data set WORK.D6.

NOTE: There were 1 observations read from the data set WORK.D7.

NOTE: There were 1 observations read from the data set WORK.D8.

NOTE: There were 1 observations read from the data set WORK.D9.

NOTE: There were 1 observations read from the data set WORK.D10.

NOTE: There were 1 observations read from the data set WORK.D11.

NOTE: The data set TEMP.HIGHOUTDATA_PH has 3 observations and 13
variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

9213       
/**********************************************************************

9214        *   PRODUCT:   SAS

9215        *   VERSION:   9.2

9216        *   CREATOR:   External File Interface

9217        *   DATE:      21NOV08

9218        *   DESC:      Generated SAS Datastep Code

9219        *   TEMPLATE SOURCE:  (None Specified.)

937                                                        The SAS
System                            15:50 Friday, November 21, 2008

9220       
***********************************************************************/

9221           data _null_;

9222           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

9223           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

9224           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_PH.csv' delimiter=',' DSD

9224     ! DROPOVER lrecl=32767;

9225           if _n_ = 1 then        /* write column names or labels */

9226            do;

9227              put

9228                 "NAICS"

9229              ','

9230                 "D"

9231              ','

9232                 "percent1"

9233              ','

9234                 "percent2"

9235              ','

9236                 "percent3"

9237              ','

9238                 "percent4"

9239              ','

9240                 "percent5"

9241              ','

9242                 "percent6"

9243              ','

9244                 "percent7"

9245              ','

9246                 "percent8"

9247              ','

9248                 "percent9"

9249              ','

9250                 "percent10"

9251              ','

9252                 "percent11"

9253              ;

9254            end;

9255          set  TEMP.HIGHOUTDATA_PH   end=EFIEOD;

9256              format NAICS $16. ;

9257              format D best12. ;

9258              format percent1 percent8.2 ;

9259              format percent2 percent8.2 ;

9260              format percent3 percent8.2 ;

9261              format percent4 percent8.2 ;

9262              format percent5 percent8.2 ;

9263              format percent6 percent8.2 ;

9264              format percent7 percent8.2 ;

9265              format percent8 percent8.2 ;

9266              format percent9 percent8.2 ;

9267              format percent10 percent8.2 ;

9268              format percent11 percent8.2 ;

9269            do;

9270              EFIOUT + 1;

9271              put NAICS $ @;

9272              put D @;

938                                                        The SAS
System                            15:50 Friday, November 21, 2008

9273              put percent1 @;

9274              put percent2 @;

9275              put percent3 @;

9276              put percent4 @;

9277              put percent5 @;

9278              put percent6 @;

9279              put percent7 @;

9280              put percent8 @;

9281              put percent9 @;

9282              put percent10 @;

9283              put percent11 ;

9284              ;

9285            end;

9286           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

9287           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

9288           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_PH.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_PH.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:50:37,

      Create Time=21Nov2008:16:50:37

NOTE: 4 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_PH.csv'.

      The minimum record length was 24.

      The maximum record length was 108.

NOTE: There were 3 observations read from the data set
TEMP.HIGHOUTDATA_PH.

NOTE: At least one W.D format was too small for the number to be
printed. The decimal may be shifted by the "BEST" format.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

3 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_PH.csv from TEMP.HIGHOUTDATA_PH.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_PH.csv" file was successfully
created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

9289       
/**********************************************************************

9290        *   PRODUCT:   SAS

9291        *   VERSION:   9.2

9292        *   CREATOR:   External File Interface

9293        *   DATE:      21NOV08

9294        *   DESC:      Generated SAS Datastep Code

9295        *   TEMPLATE SOURCE:  (None Specified.)

9296       
***********************************************************************/

9297           data _null_;

9298           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

9299           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

939                                                        The SAS
System                            15:50 Friday, November 21, 2008

9300           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_PH.csv' delimiter=',' DSD DROPOVER

9300     ! lrecl=32767;

9301           if _n_ = 1 then        /* write column names or labels */

9302            do;

9303              put

9304                 "P_A"

9305              ','

9306                 "P_100"

9307              ','

9308                 "P_0"

9309              ','

9310                 "P_1"

9311              ','

9312                 "P_2"

9313              ','

9314                 "P_3"

9315              ','

9316                 "P_4"

9317              ','

9318                 "P_5"

9319              ','

9320                 "P_6"

9321              ','

9322                 "P_7"

9323              ','

9324                 "P_8"

9325              ','

9326                 "P_9"

9327              ','

9328                 "P_10"

9329              ','

9330                 "P_11"

9331              ','

9332                 "P_12"

9333              ','

9334                 "P_13"

9335              ','

9336                 "P_14"

9337              ','

9338                 "P_15"

9339              ','

9340                 "P_16"

9341              ','

9342                 "P_17"

9343              ','

9344                 "P_18"

9345              ','

9346                 "P_19"

9347              ','

9348                 "P_20"

9349              ','

9350                 "P_21"

9351              ','

9352                 "P_22"

940                                                        The SAS
System                            15:50 Friday, November 21, 2008

9353              ','

9354                 "P_23"

9355              ','

9356                 "P_24"

9357              ','

9358                 "P_25"

9359              ','

9360                 "P_26"

9361              ','

9362                 "P_27"

9363              ','

9364                 "P_28"

9365              ','

9366                 "P_29"

9367              ','

9368                 "P_30"

9369              ','

9370                 "P_31"

9371              ','

9372                 "P_32"

9373              ','

9374                 "P_33"

9375              ','

9376                 "P_34"

9377              ','

9378                 "P_35"

9379              ','

9380                 "P_36"

9381              ','

9382                 "P_37"

9383              ','

9384                 "P_38"

9385              ','

9386                 "P_39"

9387              ','

9388                 "P_40"

9389              ','

9390                 "P_41"

9391              ','

9392                 "P_42"

9393              ','

9394                 "P_43"

9395              ','

9396                 "P_44"

9397              ','

9398                 "P_45"

9399              ','

9400                 "P_46"

9401              ','

9402                 "P_47"

9403              ','

9404                 "P_48"

9405              ','

9406                 "P_49"

941                                                        The SAS
System                            15:50 Friday, November 21, 2008

9407              ','

9408                 "P_50"

9409              ','

9410                 "P_51"

9411              ','

9412                 "P_52"

9413              ','

9414                 "P_53"

9415              ','

9416                 "P_54"

9417              ','

9418                 "P_55"

9419              ','

9420                 "P_56"

9421              ','

9422                 "P_57"

9423              ','

9424                 "P_58"

9425              ','

9426                 "P_59"

9427              ','

9428                 "P_60"

9429              ','

9430                 "P_61"

9431              ','

9432                 "P_62"

9433              ','

9434                 "P_63"

9435              ','

9436                 "P_64"

9437              ','

9438                 "P_65"

9439              ','

9440                 "P_66"

9441              ','

9442                 "P_67"

9443              ','

9444                 "P_68"

9445              ','

9446                 "P_69"

9447              ','

9448                 "P_70"

9449              ','

9450                 "P_71"

9451              ','

9452                 "P_72"

9453              ','

9454                 "P_73"

9455              ','

9456                 "P_74"

9457              ','

9458                 "P_75"

9459              ','

9460                 "P_76"

942                                                        The SAS
System                            15:50 Friday, November 21, 2008

9461              ','

9462                 "P_77"

9463              ','

9464                 "P_78"

9465              ','

9466                 "P_79"

9467              ','

9468                 "P_80"

9469              ','

9470                 "P_81"

9471              ','

9472                 "P_82"

9473              ','

9474                 "P_83"

9475              ','

9476                 "P_84"

9477              ','

9478                 "P_85"

9479              ','

9480                 "P_86"

9481              ','

9482                 "P_87"

9483              ','

9484                 "P_88"

9485              ','

9486                 "P_89"

9487              ','

9488                 "P_90"

9489              ','

9490                 "P_91"

9491              ','

9492                 "P_92"

9493              ','

9494                 "P_93"

9495              ','

9496                 "P_94"

9497              ','

9498                 "P_95"

9499              ','

9500                 "P_96"

9501              ','

9502                 "P_97"

9503              ','

9504                 "P_98"

9505              ','

9506                 "P_99"

9507              ;

9508            end;

9509          set  TEMP4.HIGH_PH   end=EFIEOD;

9510              format P_A best12. ;

9511              format P_100 best12. ;

9512              format P_0 best12. ;

9513              format P_1 best12. ;

9514              format P_2 best12. ;

943                                                        The SAS
System                            15:50 Friday, November 21, 2008

9515              format P_3 best12. ;

9516              format P_4 best12. ;

9517              format P_5 best12. ;

9518              format P_6 best12. ;

9519              format P_7 best12. ;

9520              format P_8 best12. ;

9521              format P_9 best12. ;

9522              format P_10 best12. ;

9523              format P_11 best12. ;

9524              format P_12 best12. ;

9525              format P_13 best12. ;

9526              format P_14 best12. ;

9527              format P_15 best12. ;

9528              format P_16 best12. ;

9529              format P_17 best12. ;

9530              format P_18 best12. ;

9531              format P_19 best12. ;

9532              format P_20 best12. ;

9533              format P_21 best12. ;

9534              format P_22 best12. ;

9535              format P_23 best12. ;

9536              format P_24 best12. ;

9537              format P_25 best12. ;

9538              format P_26 best12. ;

9539              format P_27 best12. ;

9540              format P_28 best12. ;

9541              format P_29 best12. ;

9542              format P_30 best12. ;

9543              format P_31 best12. ;

9544              format P_32 best12. ;

9545              format P_33 best12. ;

9546              format P_34 best12. ;

9547              format P_35 best12. ;

9548              format P_36 best12. ;

9549              format P_37 best12. ;

9550              format P_38 best12. ;

9551              format P_39 best12. ;

9552              format P_40 best12. ;

9553              format P_41 best12. ;

9554              format P_42 best12. ;

9555              format P_43 best12. ;

9556              format P_44 best12. ;

9557              format P_45 best12. ;

9558              format P_46 best12. ;

9559              format P_47 best12. ;

9560              format P_48 best12. ;

9561              format P_49 best12. ;

9562              format P_50 best12. ;

9563              format P_51 best12. ;

9564              format P_52 best12. ;

9565              format P_53 best12. ;

9566              format P_54 best12. ;

9567              format P_55 best12. ;

9568              format P_56 best12. ;

944                                                        The SAS
System                            15:50 Friday, November 21, 2008

9569              format P_57 best12. ;

9570              format P_58 best12. ;

9571              format P_59 best12. ;

9572              format P_60 best12. ;

9573              format P_61 best12. ;

9574              format P_62 best12. ;

9575              format P_63 best12. ;

9576              format P_64 best12. ;

9577              format P_65 best12. ;

9578              format P_66 best12. ;

9579              format P_67 best12. ;

9580              format P_68 best12. ;

9581              format P_69 best12. ;

9582              format P_70 best12. ;

9583              format P_71 best12. ;

9584              format P_72 best12. ;

9585              format P_73 best12. ;

9586              format P_74 best12. ;

9587              format P_75 best12. ;

9588              format P_76 best12. ;

9589              format P_77 best12. ;

9590              format P_78 best12. ;

9591              format P_79 best12. ;

9592              format P_80 best12. ;

9593              format P_81 best12. ;

9594              format P_82 best12. ;

9595              format P_83 best12. ;

9596              format P_84 best12. ;

9597              format P_85 best12. ;

9598              format P_86 best12. ;

9599              format P_87 best12. ;

9600              format P_88 best12. ;

9601              format P_89 best12. ;

9602              format P_90 best12. ;

9603              format P_91 best12. ;

9604              format P_92 best12. ;

9605              format P_93 best12. ;

9606              format P_94 best12. ;

9607              format P_95 best12. ;

9608              format P_96 best12. ;

9609              format P_97 best12. ;

9610              format P_98 best12. ;

9611              format P_99 best12. ;

9612            do;

9613              EFIOUT + 1;

9614              put P_A @;

9615              put P_100 @;

9616              put P_0 @;

9617              put P_1 @;

9618              put P_2 @;

9619              put P_3 @;

9620              put P_4 @;

9621              put P_5 @;

9622              put P_6 @;

945                                                        The SAS
System                            15:50 Friday, November 21, 2008

9623              put P_7 @;

9624              put P_8 @;

9625              put P_9 @;

9626              put P_10 @;

9627              put P_11 @;

9628              put P_12 @;

9629              put P_13 @;

9630              put P_14 @;

9631              put P_15 @;

9632              put P_16 @;

9633              put P_17 @;

9634              put P_18 @;

9635              put P_19 @;

9636              put P_20 @;

9637              put P_21 @;

9638              put P_22 @;

9639              put P_23 @;

9640              put P_24 @;

9641              put P_25 @;

9642              put P_26 @;

9643              put P_27 @;

9644              put P_28 @;

9645              put P_29 @;

9646              put P_30 @;

9647              put P_31 @;

9648              put P_32 @;

9649              put P_33 @;

9650              put P_34 @;

9651              put P_35 @;

9652              put P_36 @;

9653              put P_37 @;

9654              put P_38 @;

9655              put P_39 @;

9656              put P_40 @;

9657              put P_41 @;

9658              put P_42 @;

9659              put P_43 @;

9660              put P_44 @;

9661              put P_45 @;

9662              put P_46 @;

9663              put P_47 @;

9664              put P_48 @;

9665              put P_49 @;

9666              put P_50 @;

9667              put P_51 @;

9668              put P_52 @;

9669              put P_53 @;

9670              put P_54 @;

9671              put P_55 @;

9672              put P_56 @;

9673              put P_57 @;

9674              put P_58 @;

9675              put P_59 @;

9676              put P_60 @;

946                                                        The SAS
System                            15:50 Friday, November 21, 2008

9677              put P_61 @;

9678              put P_62 @;

9679              put P_63 @;

9680              put P_64 @;

9681              put P_65 @;

9682              put P_66 @;

9683              put P_67 @;

9684              put P_68 @;

9685              put P_69 @;

9686              put P_70 @;

9687              put P_71 @;

9688              put P_72 @;

9689              put P_73 @;

9690              put P_74 @;

9691              put P_75 @;

9692              put P_76 @;

9693              put P_77 @;

9694              put P_78 @;

9695              put P_79 @;

9696              put P_80 @;

9697              put P_81 @;

9698              put P_82 @;

9699              put P_83 @;

9700              put P_84 @;

9701              put P_85 @;

9702              put P_86 @;

9703              put P_87 @;

9704              put P_88 @;

9705              put P_89 @;

9706              put P_90 @;

9707              put P_91 @;

9708              put P_92 @;

9709              put P_93 @;

9710              put P_94 @;

9711              put P_95 @;

9712              put P_96 @;

9713              put P_97 @;

9714              put P_98 @;

9715              put P_99 ;

9716              ;

9717            end;

9718           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

9719           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

9720           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_PH.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_PH.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:50:37,

      Create Time=21Nov2008:16:50:37

NOTE: 2 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_PH.csv'.

      The minimum record length was 499.

      The maximum record length was 1316.

947                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set TEMP4.HIGH_PH.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

1 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_PH.csv from TEMP4.HIGH_PH.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_PH.csv" file was successfully created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.06 seconds

      cpu time            0.04 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: Deleting WORK.D10 (memtype=DATA).

NOTE: Deleting WORK.D11 (memtype=DATA).

NOTE: Deleting WORK.D2 (memtype=DATA).

NOTE: Deleting WORK.D3 (memtype=DATA).

NOTE: Deleting WORK.D4 (memtype=DATA).

NOTE: Deleting WORK.D5 (memtype=DATA).

NOTE: Deleting WORK.D6 (memtype=DATA).

NOTE: Deleting WORK.D7 (memtype=DATA).

NOTE: Deleting WORK.D8 (memtype=DATA).

NOTE: Deleting WORK.D9 (memtype=DATA).

NOTE: Deleting WORK.X (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Copying TEMP3.HIGHCOMM3 to WORK.HIGHCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHCOMM3.

NOTE: The data set WORK.HIGHCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHCRUISE3 to WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHCRUISE3.

NOTE: The data set WORK.HIGHCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFBARGE3 to WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFBARGE3.

NOTE: The data set WORK.HIGHFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFSHIPS3 to WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFSHIPS3.

NOTE: The data set WORK.HIGHFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHPASS3 to WORK.HIGHPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHPASS3.

NOTE: The data set WORK.HIGHPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHREC3 to WORK.HIGHREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHREC3.

NOTE: The data set WORK.HIGHREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.HIGHTBARGE3 to WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTBARGE3.

948                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.HIGHTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHTSHIPS3 to WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTSHIPS3.

NOTE: The data set WORK.HIGHTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHUTILITY3 to WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHUTILITY3.

NOTE: The data set WORK.HIGHUTILITY3 has 11 observations and 1
variables.

NOTE: Copying TEMP3.LOWCOMM3 to WORK.LOWCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWCOMM3.

NOTE: The data set WORK.LOWCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWCRUISE3 to WORK.LOWCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWCRUISE3.

NOTE: The data set WORK.LOWCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFBARGE3 to WORK.LOWFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFBARGE3.

NOTE: The data set WORK.LOWFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFSHIPS3 to WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFSHIPS3.

NOTE: The data set WORK.LOWFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWPASS3 to WORK.LOWPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWPASS3.

NOTE: The data set WORK.LOWPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWREC3 to WORK.LOWREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWREC3.

NOTE: The data set WORK.LOWREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.LOWTBARGE3 to WORK.LOWTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTBARGE3.

NOTE: The data set WORK.LOWTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWTSHIPS3 to WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTSHIPS3.

NOTE: The data set WORK.LOWTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWUTILITY3 to WORK.LOWUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWUTILITY3.

NOTE: The data set WORK.LOWUTILITY3 has 11 observations and 1 variables.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting TEMP.HIGHOUTDATA_PH (memtype=DATA).

NOTE: Deleting TEMP.HIGH_PH (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.N (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: The file WORK.D1 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

949                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A1 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D1.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 11 observations read from the data set WORK.A1.

NOTE: The data set WORK.D1 has 11 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A2 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A2 to WORK.D1.

950                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set WORK.A2.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 22 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A3 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A3.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 33 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

951                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A4 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A4.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 44 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A5 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A5.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 55 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

952                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A6 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A6.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 66 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

953                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.A7 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A7.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 77 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A8 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A8.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 88 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.06 seconds

954                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A9 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A9.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 99 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A10 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

955                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A10 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A10.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 110 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A11 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A11.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 121 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D1A (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

956                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A1 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D1A.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 121 observations read from the data set WORK.A1.

NOTE: The data set WORK.D1A has 121 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A2 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

957                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Appending WORK.A2 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A2.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 242 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A3 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A3 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A3.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 363 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

958                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A4 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A4.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 484 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A5 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A5.

NOTE: 121 observations added.

959                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.D1A has 605 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A6 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A6 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A6.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 726 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

960                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A7 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A7.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 847 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A8 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A8.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 968 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

961                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A9 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A9 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A9.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 1089 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A10 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

962                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A10.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 1210 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A11 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D1A.

NOTE: There were 121 observations read from the data set WORK.A11.

NOTE: 121 observations added.

NOTE: The data set WORK.D1A has 1331 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

963                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D2 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A1 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D2.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 1331 observations read from the data set WORK.A1.

NOTE: The data set WORK.D2 has 1331 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

964                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A2 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A2 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A2.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 2662 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A3 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A3.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 3993 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

965                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A4 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A4.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 5324 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

966                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A5 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A5.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 6655 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A6 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A6 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A6.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 7986 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

967                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A7 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A7.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 9317 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A8 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

968                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A8 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A8.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 10648 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A9 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A9.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 11979 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

969                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A10 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A10.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 13310 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1A.

NOTE: The data set WORK.A11 has 1331 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D2.

NOTE: There were 1331 observations read from the data set WORK.A11.

NOTE: 1331 observations added.

NOTE: The data set WORK.D2 has 14641 observations and 4 variables.

970                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.D1A (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D1B (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D7 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D3 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A1 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

971                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A1 to WORK.D3.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 14641 observations read from the data set WORK.A1.

NOTE: The data set WORK.D3 has 14641 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A2 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A2.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 29282 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

972                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A3 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A3.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 43923 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A4 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A4.

973                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 58564 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A5 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A5.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 73205 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

974                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A6 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A6.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 87846 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A7 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A7.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 102487 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

975                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A8 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A8.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 117128 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A9 has 14641 observations and 5 variables.

976                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A9.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 131769 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A10 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A10.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 146410 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

977                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D2.

NOTE: The data set WORK.A11 has 14641 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A11 to WORK.D3.

NOTE: There were 14641 observations read from the data set WORK.A11.

NOTE: 14641 observations added.

NOTE: The data set WORK.D3 has 161051 observations and 5 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D6 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D4 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

978                                                        The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 11 observations read from the data set WORK.HIGHCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A1 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A1 to WORK.D4.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 161051 observations read from the data set WORK.A1.

NOTE: The data set WORK.D4 has 161051 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A2 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

979                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A2 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A2.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 322102 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A3 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.43 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A3 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A3.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 483153 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.39 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

980                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A4 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A4 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A4.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 644204 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A5 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.35 seconds

      cpu time            0.06 seconds

      

NOTE: Appending WORK.A5 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A5.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 805255 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.31 seconds

981                                                        The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A6 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A6 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A6.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 966306 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

982                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A7 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A7 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A7.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 1127357 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A8 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A8 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A8.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 1288408 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

983                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A9 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A9 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A9.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 1449459 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A10 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.34 seconds

      cpu time            0.04 seconds

      

984                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A10 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A10.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 1610510 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.88 seconds

      cpu time            0.04 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHCOMM3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 161051 observations read from the data set WORK.D3.

NOTE: The data set WORK.A11 has 161051 observations and 6 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Appending WORK.A11 to WORK.D4.

NOTE: There were 161051 observations read from the data set WORK.A11.

NOTE: 161051 observations added.

NOTE: The data set WORK.D4 has 1771561 observations and 6 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.59 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

985                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D9 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D10 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1771561 observations read from the data set WORK.D4.

NOTE: The data set TEMP.HIGH_MC has 1771561 observations and 7
variables.

NOTE: DATA statement used (Total process time):

      real time           3.18 seconds

      cpu time            0.67 seconds

      

NOTE: Deleting WORK.D4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D8 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D5 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.HIGHCOMM3 (memtype=DATA).

NOTE: Deleting WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHPASS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHREC3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTSHIPS3 (memtype=DATA).

986                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.LOWCOMM3 (memtype=DATA).

NOTE: Deleting WORK.LOWCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWPASS3 (memtype=DATA).

NOTE: Deleting WORK.LOWREC3 (memtype=DATA).

NOTE: Deleting WORK.LOWTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.LARGE2 created, with 1771561 rows and 16 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           8.21 seconds

      cpu time            3.31 seconds

      

NOTE: Variable cs_cost is uninitialized.

NOTE: Variable rs_cost is uninitialized.

NOTE: Variable ts_cost is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      1771561 at 9720:140   1771561 at 9720:16    1771561 at 9720:64    

NOTE: There were 1771561 observations read from the data set
WORK.LARGE2.

NOTE: The data set WORK.LARGE3 has 1771561 observations and 20
variables.

NOTE: DATA statement used (Total process time):

      real time           4.78 seconds

      cpu time            1.65 seconds

      

NOTE: Deleting WORK.LARGE2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           3.20 seconds

      cpu time            0.03 seconds

      

NOTE: Table WORK.LARGE3A created, with 1771561 rows and 31 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           12.03 seconds

      cpu time            5.64 seconds

      

NOTE: Deleting WORK.LARGE3 (memtype=DATA).

987                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.37 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE3A.

NOTE: The data set WORK.LARGE3B has 1771561 observations and 43
variables.

NOTE: DATA statement used (Total process time):

      real time           5.43 seconds

      cpu time            2.31 seconds

      

NOTE: Deleting WORK.LARGE3A (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           3.18 seconds

      cpu time            0.04 seconds

      

NOTE: Table WORK.LARGE4 created, with 1771561 rows and 34 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           9.86 seconds

      cpu time            4.81 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set TEMP4.LARGE4 has 1771561 observations and 34
variables.

NOTE: DATA statement used (Total process time):

      real time           4.87 seconds

      cpu time            1.54 seconds

      

NOTE: Deleting WORK.LARGE3B (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           3.51 seconds

      cpu time            0.07 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L1 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           2.32 seconds

      cpu time            0.67 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L2 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

988                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           2.73 seconds

      cpu time            0.67 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L3 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           2.25 seconds

      cpu time            0.60 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L4 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           2.73 seconds

      cpu time            0.59 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L5 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           1.26 seconds

      cpu time            0.65 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L6 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           2.12 seconds

      cpu time            0.57 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L7 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           2.59 seconds

      cpu time            0.64 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L8 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           1.37 seconds

      cpu time            0.64 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

989                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.L9 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           2.62 seconds

      cpu time            0.64 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L10 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           1.07 seconds

      cpu time            0.71 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.L11 has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.96 seconds

      cpu time            0.73 seconds

      

NOTE: There were 1771561 observations read from the data set WORK.L1.

NOTE: There were 1771561 observations read from the data set WORK.L2.

NOTE: There were 1771561 observations read from the data set WORK.L3.

NOTE: There were 1771561 observations read from the data set WORK.L4.

NOTE: There were 1771561 observations read from the data set WORK.L5.

NOTE: There were 1771561 observations read from the data set WORK.L6.

NOTE: There were 1771561 observations read from the data set WORK.L7.

NOTE: There were 1771561 observations read from the data set WORK.L8.

NOTE: There were 1771561 observations read from the data set WORK.L9.

NOTE: There were 1771561 observations read from the data set WORK.L10.

NOTE: There were 1771561 observations read from the data set WORK.L11.

NOTE: The data set WORK.L has 19487171 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           6.43 seconds

      cpu time            3.56 seconds

      

NOTE: Deleting WORK.L1 (memtype=DATA).

NOTE: Deleting WORK.L2 (memtype=DATA).

NOTE: Deleting WORK.L3 (memtype=DATA).

NOTE: Deleting WORK.L4 (memtype=DATA).

NOTE: Deleting WORK.L5 (memtype=DATA).

NOTE: Deleting WORK.L6 (memtype=DATA).

NOTE: Deleting WORK.L7 (memtype=DATA).

NOTE: Deleting WORK.L8 (memtype=DATA).

NOTE: Deleting WORK.L9 (memtype=DATA).

NOTE: Deleting WORK.L10 (memtype=DATA).

NOTE: Deleting WORK.L11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

990                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 19487171 observations read from the data set WORK.L.

NOTE: The data set WORK.L has 19487171 observations and 2 variables.

NOTE: PROCEDURE SORT used (Total process time):

      real time           15.03 seconds

      cpu time            17.20 seconds

      

NOTE: The data set TEMP4.HIGH_MC has 1 observations and 102 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           7.60 seconds

      cpu time            7.03 seconds

      

NOTE: Deleting WORK.L (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.04 seconds

      cpu time            0.03 seconds

      

NOTE: There were 1771561 observations read from the data set
WORK.LARGE4.

NOTE: The data set WORK.LARGE5 has 1771561 observations and 46
variables.

NOTE: DATA statement used (Total process time):

      real time           6.29 seconds

      cpu time            3.34 seconds

      

NOTE: Deleting WORK.LARGE4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Table WORK.X created, with 3 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D1 created, with 3 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           2.90 seconds

      cpu time            1.81 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D2 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

991                                                        The SAS
System                            15:50 Friday, November 21, 2008

      real time           4.23 seconds

      cpu time            1.81 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D3 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           2.78 seconds

      cpu time            1.76 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D4 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           4.35 seconds

      cpu time            1.71 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D5 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           2.62 seconds

      cpu time            1.81 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D6 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           2.17 seconds

      cpu time            1.81 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D7 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           2.85 seconds

      cpu time            1.71 seconds

      

992                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D8 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           4.61 seconds

      cpu time            1.76 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D9 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           2.35 seconds

      cpu time            1.76 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D10 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           3.53 seconds

      cpu time            1.87 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D11 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           2.48 seconds

      cpu time            1.76 seconds

      

NOTE: Deleting WORK.LARGE5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: There were 3 observations read from the data set WORK.D1.

NOTE: There were 2 observations read from the data set WORK.D2.

NOTE: There were 2 observations read from the data set WORK.D3.

NOTE: There were 2 observations read from the data set WORK.D4.

NOTE: There were 2 observations read from the data set WORK.D5.

NOTE: There were 2 observations read from the data set WORK.D6.

993                                                        The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 2 observations read from the data set WORK.D7.

NOTE: There were 2 observations read from the data set WORK.D8.

NOTE: There were 2 observations read from the data set WORK.D9.

NOTE: There were 2 observations read from the data set WORK.D10.

NOTE: There were 1 observations read from the data set WORK.D11.

NOTE: The data set TEMP.HIGHOUTDATA_MC has 3 observations and 13
variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

9721       
/**********************************************************************

9722        *   PRODUCT:   SAS

9723        *   VERSION:   9.2

9724        *   CREATOR:   External File Interface

9725        *   DATE:      21NOV08

9726        *   DESC:      Generated SAS Datastep Code

9727        *   TEMPLATE SOURCE:  (None Specified.)

9728       
***********************************************************************/

9729           data _null_;

9730           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

9731           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

9732           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_MC.csv' delimiter=',' DSD

9732     ! DROPOVER lrecl=32767;

9733           if _n_ = 1 then        /* write column names or labels */

9734            do;

9735              put

9736                 "NAICS"

9737              ','

9738                 "D"

9739              ','

9740                 "percent1"

9741              ','

9742                 "percent2"

9743              ','

9744                 "percent3"

9745              ','

9746                 "percent4"

9747              ','

9748                 "percent5"

9749              ','

9750                 "percent6"

9751              ','

9752                 "percent7"

9753              ','

9754                 "percent8"

9755              ','

9756                 "percent9"

9757              ','

9758                 "percent10"

9759              ','

9760                 "percent11"

9761              ;

994                                                        The SAS
System                            15:50 Friday, November 21, 2008

9762            end;

9763          set  TEMP.HIGHOUTDATA_MC   end=EFIEOD;

9764              format NAICS $16. ;

9765              format D best12. ;

9766              format percent1 percent8.2 ;

9767              format percent2 percent8.2 ;

9768              format percent3 percent8.2 ;

9769              format percent4 percent8.2 ;

9770              format percent5 percent8.2 ;

9771              format percent6 percent8.2 ;

9772              format percent7 percent8.2 ;

9773              format percent8 percent8.2 ;

9774              format percent9 percent8.2 ;

9775              format percent10 percent8.2 ;

9776              format percent11 percent8.2 ;

9777            do;

9778              EFIOUT + 1;

9779              put NAICS $ @;

9780              put D @;

9781              put percent1 @;

9782              put percent2 @;

9783              put percent3 @;

9784              put percent4 @;

9785              put percent5 @;

9786              put percent6 @;

9787              put percent7 @;

9788              put percent8 @;

9789              put percent9 @;

9790              put percent10 @;

9791              put percent11 ;

9792              ;

9793            end;

9794           if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

9795           if EFIEOD then call symputx('_EFIREC_',EFIOUT);

9796           run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_MC.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_MC.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:53:13,

      Create Time=21Nov2008:16:53:13

NOTE: 4 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_MC.csv'.

      The minimum record length was 25.

      The maximum record length was 108.

NOTE: There were 3 observations read from the data set
TEMP.HIGHOUTDATA_MC.

NOTE: At least one W.D format was too small for the number to be
printed. The decimal may be shifted by the "BEST" format.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

3 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_MC.csv from TEMP.HIGHOUTDATA_MC.

  

995                                                        The SAS
System                            15:50 Friday, November 21, 2008

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_MC.csv" file was successfully
created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.04 seconds

      cpu time            0.03 seconds

      

9797       
/**********************************************************************

9798        *   PRODUCT:   SAS

9799        *   VERSION:   9.2

9800        *   CREATOR:   External File Interface

9801        *   DATE:      21NOV08

9802        *   DESC:      Generated SAS Datastep Code

9803        *   TEMPLATE SOURCE:  (None Specified.)

9804       
***********************************************************************/

9805           data _null_;

9806           %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

9807           %let _EFIREC_ = 0;     /* clear export record count macro
variable */

9808           file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_MC.csv' delimiter=',' DSD DROPOVER

9808     ! lrecl=32767;

9809           if _n_ = 1 then        /* write column names or labels */

9810            do;

9811              put

9812                 "P_A"

9813              ','

9814                 "P_100"

9815              ','

9816                 "P_0"

9817              ','

9818                 "P_1"

9819              ','

9820                 "P_2"

9821              ','

9822                 "P_3"

9823              ','

9824                 "P_4"

9825              ','

9826                 "P_5"

9827              ','

9828                 "P_6"

9829              ','

9830                 "P_7"

9831              ','

9832                 "P_8"

9833              ','

9834                 "P_9"

9835              ','

9836                 "P_10"

9837              ','

9838                 "P_11"

9839              ','

9840                 "P_12"

9841              ','

996                                                        The SAS
System                            15:50 Friday, November 21, 2008

9842                 "P_13"

9843              ','

9844                 "P_14"

9845              ','

9846                 "P_15"

9847              ','

9848                 "P_16"

9849              ','

9850                 "P_17"

9851              ','

9852                 "P_18"

9853              ','

9854                 "P_19"

9855              ','

9856                 "P_20"

9857              ','

9858                 "P_21"

9859              ','

9860                 "P_22"

9861              ','

9862                 "P_23"

9863              ','

9864                 "P_24"

9865              ','

9866                 "P_25"

9867              ','

9868                 "P_26"

9869              ','

9870                 "P_27"

9871              ','

9872                 "P_28"

9873              ','

9874                 "P_29"

9875              ','

9876                 "P_30"

9877              ','

9878                 "P_31"

9879              ','

9880                 "P_32"

9881              ','

9882                 "P_33"

9883              ','

9884                 "P_34"

9885              ','

9886                 "P_35"

9887              ','

9888                 "P_36"

9889              ','

9890                 "P_37"

9891              ','

9892                 "P_38"

9893              ','

9894                 "P_39"

9895              ','

997                                                        The SAS
System                            15:50 Friday, November 21, 2008

9896                 "P_40"

9897              ','

9898                 "P_41"

9899              ','

9900                 "P_42"

9901              ','

9902                 "P_43"

9903              ','

9904                 "P_44"

9905              ','

9906                 "P_45"

9907              ','

9908                 "P_46"

9909              ','

9910                 "P_47"

9911              ','

9912                 "P_48"

9913              ','

9914                 "P_49"

9915              ','

9916                 "P_50"

9917              ','

9918                 "P_51"

9919              ','

9920                 "P_52"

9921              ','

9922                 "P_53"

9923              ','

9924                 "P_54"

9925              ','

9926                 "P_55"

9927              ','

9928                 "P_56"

9929              ','

9930                 "P_57"

9931              ','

9932                 "P_58"

9933              ','

9934                 "P_59"

9935              ','

9936                 "P_60"

9937              ','

9938                 "P_61"

9939              ','

9940                 "P_62"

9941              ','

9942                 "P_63"

9943              ','

9944                 "P_64"

9945              ','

9946                 "P_65"

9947              ','

9948                 "P_66"

9949              ','

998                                                        The SAS
System                            15:50 Friday, November 21, 2008

9950                 "P_67"

9951              ','

9952                 "P_68"

9953              ','

9954                 "P_69"

9955              ','

9956                 "P_70"

9957              ','

9958                 "P_71"

9959              ','

9960                 "P_72"

9961              ','

9962                 "P_73"

9963              ','

9964                 "P_74"

9965              ','

9966                 "P_75"

9967              ','

9968                 "P_76"

9969              ','

9970                 "P_77"

9971              ','

9972                 "P_78"

9973              ','

9974                 "P_79"

9975              ','

9976                 "P_80"

9977              ','

9978                 "P_81"

9979              ','

9980                 "P_82"

9981              ','

9982                 "P_83"

9983              ','

9984                 "P_84"

9985              ','

9986                 "P_85"

9987              ','

9988                 "P_86"

9989              ','

9990                 "P_87"

9991              ','

9992                 "P_88"

9993              ','

9994                 "P_89"

9995              ','

9996                 "P_90"

9997              ','

9998                 "P_91"

9999              ','

10000                "P_92"

10001             ','

10002                "P_93"

10003             ','

999                                                        The SAS
System                            15:50 Friday, November 21, 2008

10004                "P_94"

10005             ','

10006                "P_95"

10007             ','

10008                "P_96"

10009             ','

10010                "P_97"

10011             ','

10012                "P_98"

10013             ','

10014                "P_99"

10015             ;

10016           end;

10017         set  TEMP4.HIGH_MC   end=EFIEOD;

10018             format P_A best12. ;

10019             format P_100 best12. ;

10020             format P_0 best12. ;

10021             format P_1 best12. ;

10022             format P_2 best12. ;

10023             format P_3 best12. ;

10024             format P_4 best12. ;

10025             format P_5 best12. ;

10026             format P_6 best12. ;

10027             format P_7 best12. ;

10028             format P_8 best12. ;

10029             format P_9 best12. ;

10030             format P_10 best12. ;

10031             format P_11 best12. ;

10032             format P_12 best12. ;

10033             format P_13 best12. ;

10034             format P_14 best12. ;

10035             format P_15 best12. ;

10036             format P_16 best12. ;

10037             format P_17 best12. ;

10038             format P_18 best12. ;

10039             format P_19 best12. ;

10040             format P_20 best12. ;

10041             format P_21 best12. ;

10042             format P_22 best12. ;

10043             format P_23 best12. ;

10044             format P_24 best12. ;

10045             format P_25 best12. ;

10046             format P_26 best12. ;

10047             format P_27 best12. ;

10048             format P_28 best12. ;

10049             format P_29 best12. ;

10050             format P_30 best12. ;

10051             format P_31 best12. ;

10052             format P_32 best12. ;

10053             format P_33 best12. ;

10054             format P_34 best12. ;

10055             format P_35 best12. ;

10056             format P_36 best12. ;

10057             format P_37 best12. ;

1000                                                       The SAS
System                            15:50 Friday, November 21, 2008

10058             format P_38 best12. ;

10059             format P_39 best12. ;

10060             format P_40 best12. ;

10061             format P_41 best12. ;

10062             format P_42 best12. ;

10063             format P_43 best12. ;

10064             format P_44 best12. ;

10065             format P_45 best12. ;

10066             format P_46 best12. ;

10067             format P_47 best12. ;

10068             format P_48 best12. ;

10069             format P_49 best12. ;

10070             format P_50 best12. ;

10071             format P_51 best12. ;

10072             format P_52 best12. ;

10073             format P_53 best12. ;

10074             format P_54 best12. ;

10075             format P_55 best12. ;

10076             format P_56 best12. ;

10077             format P_57 best12. ;

10078             format P_58 best12. ;

10079             format P_59 best12. ;

10080             format P_60 best12. ;

10081             format P_61 best12. ;

10082             format P_62 best12. ;

10083             format P_63 best12. ;

10084             format P_64 best12. ;

10085             format P_65 best12. ;

10086             format P_66 best12. ;

10087             format P_67 best12. ;

10088             format P_68 best12. ;

10089             format P_69 best12. ;

10090             format P_70 best12. ;

10091             format P_71 best12. ;

10092             format P_72 best12. ;

10093             format P_73 best12. ;

10094             format P_74 best12. ;

10095             format P_75 best12. ;

10096             format P_76 best12. ;

10097             format P_77 best12. ;

10098             format P_78 best12. ;

10099             format P_79 best12. ;

10100             format P_80 best12. ;

10101             format P_81 best12. ;

10102             format P_82 best12. ;

10103             format P_83 best12. ;

10104             format P_84 best12. ;

10105             format P_85 best12. ;

10106             format P_86 best12. ;

10107             format P_87 best12. ;

10108             format P_88 best12. ;

10109             format P_89 best12. ;

10110             format P_90 best12. ;

10111             format P_91 best12. ;

1001                                                       The SAS
System                            15:50 Friday, November 21, 2008

10112             format P_92 best12. ;

10113             format P_93 best12. ;

10114             format P_94 best12. ;

10115             format P_95 best12. ;

10116             format P_96 best12. ;

10117             format P_97 best12. ;

10118             format P_98 best12. ;

10119             format P_99 best12. ;

10120           do;

10121             EFIOUT + 1;

10122             put P_A @;

10123             put P_100 @;

10124             put P_0 @;

10125             put P_1 @;

10126             put P_2 @;

10127             put P_3 @;

10128             put P_4 @;

10129             put P_5 @;

10130             put P_6 @;

10131             put P_7 @;

10132             put P_8 @;

10133             put P_9 @;

10134             put P_10 @;

10135             put P_11 @;

10136             put P_12 @;

10137             put P_13 @;

10138             put P_14 @;

10139             put P_15 @;

10140             put P_16 @;

10141             put P_17 @;

10142             put P_18 @;

10143             put P_19 @;

10144             put P_20 @;

10145             put P_21 @;

10146             put P_22 @;

10147             put P_23 @;

10148             put P_24 @;

10149             put P_25 @;

10150             put P_26 @;

10151             put P_27 @;

10152             put P_28 @;

10153             put P_29 @;

10154             put P_30 @;

10155             put P_31 @;

10156             put P_32 @;

10157             put P_33 @;

10158             put P_34 @;

10159             put P_35 @;

10160             put P_36 @;

10161             put P_37 @;

10162             put P_38 @;

10163             put P_39 @;

10164             put P_40 @;

10165             put P_41 @;

1002                                                       The SAS
System                            15:50 Friday, November 21, 2008

10166             put P_42 @;

10167             put P_43 @;

10168             put P_44 @;

10169             put P_45 @;

10170             put P_46 @;

10171             put P_47 @;

10172             put P_48 @;

10173             put P_49 @;

10174             put P_50 @;

10175             put P_51 @;

10176             put P_52 @;

10177             put P_53 @;

10178             put P_54 @;

10179             put P_55 @;

10180             put P_56 @;

10181             put P_57 @;

10182             put P_58 @;

10183             put P_59 @;

10184             put P_60 @;

10185             put P_61 @;

10186             put P_62 @;

10187             put P_63 @;

10188             put P_64 @;

10189             put P_65 @;

10190             put P_66 @;

10191             put P_67 @;

10192             put P_68 @;

10193             put P_69 @;

10194             put P_70 @;

10195             put P_71 @;

10196             put P_72 @;

10197             put P_73 @;

10198             put P_74 @;

10199             put P_75 @;

10200             put P_76 @;

10201             put P_77 @;

10202             put P_78 @;

10203             put P_79 @;

10204             put P_80 @;

10205             put P_81 @;

10206             put P_82 @;

10207             put P_83 @;

10208             put P_84 @;

10209             put P_85 @;

10210             put P_86 @;

10211             put P_87 @;

10212             put P_88 @;

10213             put P_89 @;

10214             put P_90 @;

10215             put P_91 @;

10216             put P_92 @;

10217             put P_93 @;

10218             put P_94 @;

10219             put P_95 @;

1003                                                       The SAS
System                            15:50 Friday, November 21, 2008

10220             put P_96 @;

10221             put P_97 @;

10222             put P_98 @;

10223             put P_99 ;

10224             ;

10225           end;

10226          if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

10227          if EFIEOD then call symputx('_EFIREC_',EFIOUT);

10228          run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_MC.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_MC.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:53:13,

      Create Time=21Nov2008:16:53:13

NOTE: 2 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_MC.csv'.

      The minimum record length was 499.

      The maximum record length was 1314.

NOTE: There were 1 observations read from the data set TEMP4.HIGH_MC.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

1 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_MC.csv from TEMP4.HIGH_MC.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_MC.csv" file was successfully created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.07 seconds

      cpu time            0.09 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: Deleting WORK.D10 (memtype=DATA).

NOTE: Deleting WORK.D11 (memtype=DATA).

NOTE: Deleting WORK.D2 (memtype=DATA).

NOTE: Deleting WORK.D3 (memtype=DATA).

NOTE: Deleting WORK.D4 (memtype=DATA).

NOTE: Deleting WORK.D5 (memtype=DATA).

NOTE: Deleting WORK.D6 (memtype=DATA).

NOTE: Deleting WORK.D7 (memtype=DATA).

NOTE: Deleting WORK.D8 (memtype=DATA).

NOTE: Deleting WORK.D9 (memtype=DATA).

NOTE: Deleting WORK.X (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Copying TEMP3.HIGHCOMM3 to WORK.HIGHCOMM3 (memtype=DATA).

1004                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set TEMP3.HIGHCOMM3.

NOTE: The data set WORK.HIGHCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHCRUISE3 to WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHCRUISE3.

NOTE: The data set WORK.HIGHCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFBARGE3 to WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFBARGE3.

NOTE: The data set WORK.HIGHFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFSHIPS3 to WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFSHIPS3.

NOTE: The data set WORK.HIGHFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHPASS3 to WORK.HIGHPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHPASS3.

NOTE: The data set WORK.HIGHPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHREC3 to WORK.HIGHREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHREC3.

NOTE: The data set WORK.HIGHREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.HIGHTBARGE3 to WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTBARGE3.

NOTE: The data set WORK.HIGHTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHTSHIPS3 to WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTSHIPS3.

NOTE: The data set WORK.HIGHTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHUTILITY3 to WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHUTILITY3.

NOTE: The data set WORK.HIGHUTILITY3 has 11 observations and 1
variables.

NOTE: Copying TEMP3.LOWCOMM3 to WORK.LOWCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWCOMM3.

NOTE: The data set WORK.LOWCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWCRUISE3 to WORK.LOWCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWCRUISE3.

NOTE: The data set WORK.LOWCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFBARGE3 to WORK.LOWFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFBARGE3.

NOTE: The data set WORK.LOWFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFSHIPS3 to WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFSHIPS3.

NOTE: The data set WORK.LOWFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWPASS3 to WORK.LOWPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWPASS3.

NOTE: The data set WORK.LOWPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWREC3 to WORK.LOWREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWREC3.

NOTE: The data set WORK.LOWREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.LOWTBARGE3 to WORK.LOWTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTBARGE3.

NOTE: The data set WORK.LOWTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWTSHIPS3 to WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTSHIPS3.

NOTE: The data set WORK.LOWTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWUTILITY3 to WORK.LOWUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWUTILITY3.

NOTE: The data set WORK.LOWUTILITY3 has 11 observations and 1 variables.

NOTE: PROCEDURE DATASETS used (Total process time):

1005                                                       The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting TEMP.HIGHOUTDATA_MC (memtype=DATA).

NOTE: Deleting TEMP.HIGH_MC (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.N (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: The file WORK.D1 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A1 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D1.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 11 observations read from the data set WORK.A1.

NOTE: The data set WORK.D1 has 11 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

1006                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A2 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A2.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 22 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A3 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A3 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A3.

1007                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 33 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A4 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A4.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 44 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

1008                                                       The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A5 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A5.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 55 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A6 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A6 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A6.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 66 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

1009                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A7 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A7.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 77 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A8 has 11 observations and 2 variables.

1010                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A8.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 88 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A9 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A9.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 99 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

1011                                                       The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A10 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A10.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 110 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A11 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

1012                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A11 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A11.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 121 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D1B (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A1 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A1 to WORK.D1B.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 121 observations read from the data set WORK.A1.

NOTE: The data set WORK.D1B has 121 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

1013                                                       The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A2 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A2.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 242 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A3 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

1014                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A3 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A3.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 363 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A4 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A4.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 484 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

1015                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A5 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A5.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 605 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A6 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A6 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A6.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 726 observations and 3 variables.

1016                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A7 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A7.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 847 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

1017                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A8 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A8.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 968 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A9 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A9.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 1089 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

1018                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A10 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A10.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 1210 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A11 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

1019                                                       The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A11.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 1331 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D1A (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D6 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A1 has 1331 observations and 3 variables.

1020                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D6.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 1331 observations read from the data set WORK.A1.

NOTE: The data set WORK.D6 has 1331 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A2 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A2.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 2662 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

1021                                                       The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 11 observations read from the data set WORK.HIGHREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A3 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A3.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 3993 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A4 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

1022                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A4 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A4.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 5324 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A5 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A5.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 6655 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

1023                                                       The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A6 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A6.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 7986 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A7 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A7.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 9317 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

1024                                                       The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A8 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A8.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 10648 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

1025                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A9 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A9.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 11979 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A10 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A10.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 13310 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

1026                                                       The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A11 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A11 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A11.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 14641 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D1B (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D7 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D2 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

1027                                                       The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D10 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A1 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D10.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 14641 observations read from the data set WORK.A1.

NOTE: The data set WORK.D10 has 14641 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

1028                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A2 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D10.

NOTE: There were 14641 observations read from the data set WORK.A2.

NOTE: 14641 observations added.

NOTE: The data set WORK.D10 has 29282 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A3 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D10.

NOTE: There were 14641 observations read from the data set WORK.A3.

NOTE: 14641 observations added.

NOTE: The data set WORK.D10 has 43923 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

1029                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A4 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D10.

NOTE: There were 14641 observations read from the data set WORK.A4.

NOTE: 14641 observations added.

NOTE: The data set WORK.D10 has 58564 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A5 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

1030                                                       The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D10.

NOTE: There were 14641 observations read from the data set WORK.A5.

NOTE: 14641 observations added.

NOTE: The data set WORK.D10 has 73205 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A6 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A6 to WORK.D10.

NOTE: There were 14641 observations read from the data set WORK.A6.

NOTE: 14641 observations added.

NOTE: The data set WORK.D10 has 87846 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

1031                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A7 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A7 to WORK.D10.

NOTE: There were 14641 observations read from the data set WORK.A7.

NOTE: 14641 observations added.

NOTE: The data set WORK.D10 has 102487 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A8 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A8 to WORK.D10.

NOTE: There were 14641 observations read from the data set WORK.A8.

1032                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: 14641 observations added.

NOTE: The data set WORK.D10 has 117128 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A9 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A9 to WORK.D10.

NOTE: There were 14641 observations read from the data set WORK.A9.

NOTE: 14641 observations added.

NOTE: The data set WORK.D10 has 131769 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

1033                                                       The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A10 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A10 to WORK.D10.

NOTE: There were 14641 observations read from the data set WORK.A10.

NOTE: 14641 observations added.

NOTE: The data set WORK.D10 has 146410 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A11 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A11 to WORK.D10.

NOTE: There were 14641 observations read from the data set WORK.A11.

NOTE: 14641 observations added.

NOTE: The data set WORK.D10 has 161051 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

1034                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D3 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D9 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 161051 observations read from the data set WORK.D10.

NOTE: The data set TEMP.HIGH_NS has 161051 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Deleting WORK.D10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D4 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D8 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

1035                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The file WORK.D5 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.HIGHCOMM3 (memtype=DATA).

NOTE: Deleting WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHPASS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHREC3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.LOWCOMM3 (memtype=DATA).

NOTE: Deleting WORK.LOWCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWPASS3 (memtype=DATA).

NOTE: Deleting WORK.LOWREC3 (memtype=DATA).

NOTE: Deleting WORK.LOWTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.LARGE2 created, with 161051 rows and 14 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.68 seconds

      cpu time            0.25 seconds

      

NOTE: Variable cs_cost is uninitialized.

NOTE: Variable cf_cost is uninitialized.

NOTE: Variable fs_cost is uninitialized.

NOTE: Variable rs_cost is uninitialized.

NOTE: Variable ts_cost is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      161051 at 10228:140   161051 at 10228:164   161051 at 10228:212  
161051 at 10228:16    161051 at 10228:64

NOTE: There were 161051 observations read from the data set WORK.LARGE2.

NOTE: The data set WORK.LARGE3 has 161051 observations and 20 variables.

NOTE: DATA statement used (Total process time):

      real time           0.15 seconds

      cpu time            0.14 seconds

1036                                                       The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Deleting WORK.LARGE2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.LARGE3A created, with 161051 rows and 31 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           2.76 seconds

      cpu time            0.34 seconds

      

NOTE: Deleting WORK.LARGE3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 161051 observations read from the data set
WORK.LARGE3A.

NOTE: The data set WORK.LARGE3B has 161051 observations and 43
variables.

NOTE: DATA statement used (Total process time):

      real time           0.25 seconds

      cpu time            0.24 seconds

      

NOTE: Deleting WORK.LARGE3A (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.LARGE4 created, with 161051 rows and 34 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           1.26 seconds

      cpu time            0.39 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set TEMP4.LARGE4 has 161051 observations and 34
variables.

NOTE: DATA statement used (Total process time):

      real time           3.09 seconds

      cpu time            0.17 seconds

      

1037                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.LARGE3B (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L1 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L2 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L3 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L4 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.07 seconds

      cpu time            0.07 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L5 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L6 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.07 seconds

      cpu time            0.07 seconds

      

1038                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L7 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L8 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L9 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.07 seconds

      cpu time            0.07 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L10 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L11 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: There were 161051 observations read from the data set WORK.L1.

NOTE: There were 161051 observations read from the data set WORK.L2.

NOTE: There were 161051 observations read from the data set WORK.L3.

NOTE: There were 161051 observations read from the data set WORK.L4.

NOTE: There were 161051 observations read from the data set WORK.L5.

NOTE: There were 161051 observations read from the data set WORK.L6.

NOTE: There were 161051 observations read from the data set WORK.L7.

NOTE: There were 161051 observations read from the data set WORK.L8.

NOTE: There were 161051 observations read from the data set WORK.L9.

NOTE: There were 161051 observations read from the data set WORK.L10.

NOTE: There were 161051 observations read from the data set WORK.L11.

NOTE: The data set WORK.L has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           1.53 seconds

1039                                                       The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.34 seconds

      

NOTE: Deleting WORK.L1 (memtype=DATA).

NOTE: Deleting WORK.L2 (memtype=DATA).

NOTE: Deleting WORK.L3 (memtype=DATA).

NOTE: Deleting WORK.L4 (memtype=DATA).

NOTE: Deleting WORK.L5 (memtype=DATA).

NOTE: Deleting WORK.L6 (memtype=DATA).

NOTE: Deleting WORK.L7 (memtype=DATA).

NOTE: Deleting WORK.L8 (memtype=DATA).

NOTE: Deleting WORK.L9 (memtype=DATA).

NOTE: Deleting WORK.L10 (memtype=DATA).

NOTE: Deleting WORK.L11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1771561 observations read from the data set WORK.L.

NOTE: The data set WORK.L has 1771561 observations and 2 variables.

NOTE: PROCEDURE SORT used (Total process time):

      real time           2.51 seconds

      cpu time            1.57 seconds

      

NOTE: The data set TEMP4.HIGH_NS has 1 observations and 102 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           0.60 seconds

      cpu time            0.60 seconds

      

NOTE: Deleting WORK.L (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.LARGE5 has 161051 observations and 46 variables.

NOTE: DATA statement used (Total process time):

      real time           0.31 seconds

      cpu time            0.31 seconds

      

NOTE: Deleting WORK.LARGE4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

1040                                                       The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D1 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.09 seconds

      cpu time            0.11 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D2 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           1.23 seconds

      cpu time            0.14 seconds

      

NOTE: Table WORK.X created, with 2 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D3 created, with 2 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           1.20 seconds

      cpu time            0.12 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D4 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.82 seconds

      cpu time            0.17 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D5 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.10 seconds

      cpu time            0.15 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

1041                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D6 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.12 seconds

      cpu time            0.17 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D7 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.11 seconds

      cpu time            0.15 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D8 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.12 seconds

      cpu time            0.18 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D9 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.10 seconds

      cpu time            0.15 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D10 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.12 seconds

      cpu time            0.15 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D11 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

1042                                                       The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.14 seconds

      cpu time            0.17 seconds

      

NOTE: Deleting WORK.LARGE5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 2 observations read from the data set WORK.D1.

NOTE: There were 2 observations read from the data set WORK.D2.

NOTE: There were 2 observations read from the data set WORK.D3.

NOTE: There were 1 observations read from the data set WORK.D4.

NOTE: There were 1 observations read from the data set WORK.D5.

NOTE: There were 1 observations read from the data set WORK.D6.

NOTE: There were 1 observations read from the data set WORK.D7.

NOTE: There were 1 observations read from the data set WORK.D8.

NOTE: There were 1 observations read from the data set WORK.D9.

NOTE: There were 1 observations read from the data set WORK.D10.

NOTE: There were 1 observations read from the data set WORK.D11.

NOTE: The data set TEMP.HIGHOUTDATA_NS has 3 observations and 13
variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

10229      
/**********************************************************************

10230       *   PRODUCT:   SAS

10231       *   VERSION:   9.2

10232       *   CREATOR:   External File Interface

10233       *   DATE:      21NOV08

10234       *   DESC:      Generated SAS Datastep Code

10235       *   TEMPLATE SOURCE:  (None Specified.)

10236      
***********************************************************************/

10237          data _null_;

10238          %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

10239          %let _EFIREC_ = 0;     /* clear export record count macro
variable */

10240          file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_NS.csv' delimiter=',' DSD

10240    ! DROPOVER lrecl=32767;

10241          if _n_ = 1 then        /* write column names or labels */

10242           do;

10243             put

10244                "NAICS"

10245             ','

10246                "D"

10247             ','

10248                "percent1"

10249             ','

10250                "percent2"

10251             ','

1043                                                       The SAS
System                            15:50 Friday, November 21, 2008

10252                "percent3"

10253             ','

10254                "percent4"

10255             ','

10256                "percent5"

10257             ','

10258                "percent6"

10259             ','

10260                "percent7"

10261             ','

10262                "percent8"

10263             ','

10264                "percent9"

10265             ','

10266                "percent10"

10267             ','

10268                "percent11"

10269             ;

10270           end;

10271         set  TEMP.HIGHOUTDATA_NS   end=EFIEOD;

10272             format NAICS $16. ;

10273             format D best12. ;

10274             format percent1 percent8.2 ;

10275             format percent2 percent8.2 ;

10276             format percent3 percent8.2 ;

10277             format percent4 percent8.2 ;

10278             format percent5 percent8.2 ;

10279             format percent6 percent8.2 ;

10280             format percent7 percent8.2 ;

10281             format percent8 percent8.2 ;

10282             format percent9 percent8.2 ;

10283             format percent10 percent8.2 ;

10284             format percent11 percent8.2 ;

10285           do;

10286             EFIOUT + 1;

10287             put NAICS $ @;

10288             put D @;

10289             put percent1 @;

10290             put percent2 @;

10291             put percent3 @;

10292             put percent4 @;

10293             put percent5 @;

10294             put percent6 @;

10295             put percent7 @;

10296             put percent8 @;

10297             put percent9 @;

10298             put percent10 @;

10299             put percent11 ;

10300             ;

10301           end;

10302          if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

10303          if EFIEOD then call symputx('_EFIREC_',EFIOUT);

10304          run;

1044                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_NS.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_NS.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:53:32,

      Create Time=21Nov2008:16:53:32

NOTE: 4 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_NS.csv'.

      The minimum record length was 24.

      The maximum record length was 108.

NOTE: There were 3 observations read from the data set
TEMP.HIGHOUTDATA_NS.

NOTE: At least one W.D format was too small for the number to be
printed. The decimal may be shifted by the "BEST" format.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

3 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_NS.csv from TEMP.HIGHOUTDATA_NS.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_NS.csv" file was successfully
created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.04 seconds

      cpu time            0.03 seconds

      

10305      
/**********************************************************************

10306       *   PRODUCT:   SAS

10307       *   VERSION:   9.2

10308       *   CREATOR:   External File Interface

10309       *   DATE:      21NOV08

10310       *   DESC:      Generated SAS Datastep Code

10311       *   TEMPLATE SOURCE:  (None Specified.)

10312      
***********************************************************************/

10313          data _null_;

10314          %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

10315          %let _EFIREC_ = 0;     /* clear export record count macro
variable */

10316          file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_NS.csv' delimiter=',' DSD DROPOVER

10316    ! lrecl=32767;

10317          if _n_ = 1 then        /* write column names or labels */

10318           do;

10319             put

10320                "P_A"

10321             ','

10322                "P_100"

10323             ','

10324                "P_0"

10325             ','

10326                "P_1"

10327             ','

10328                "P_2"

10329             ','

10330                "P_3"

10331             ','

1045                                                       The SAS
System                            15:50 Friday, November 21, 2008

10332                "P_4"

10333             ','

10334                "P_5"

10335             ','

10336                "P_6"

10337             ','

10338                "P_7"

10339             ','

10340                "P_8"

10341             ','

10342                "P_9"

10343             ','

10344                "P_10"

10345             ','

10346                "P_11"

10347             ','

10348                "P_12"

10349             ','

10350                "P_13"

10351             ','

10352                "P_14"

10353             ','

10354                "P_15"

10355             ','

10356                "P_16"

10357             ','

10358                "P_17"

10359             ','

10360                "P_18"

10361             ','

10362                "P_19"

10363             ','

10364                "P_20"

10365             ','

10366                "P_21"

10367             ','

10368                "P_22"

10369             ','

10370                "P_23"

10371             ','

10372                "P_24"

10373             ','

10374                "P_25"

10375             ','

10376                "P_26"

10377             ','

10378                "P_27"

10379             ','

10380                "P_28"

10381             ','

10382                "P_29"

10383             ','

10384                "P_30"

10385             ','

1046                                                       The SAS
System                            15:50 Friday, November 21, 2008

10386                "P_31"

10387             ','

10388                "P_32"

10389             ','

10390                "P_33"

10391             ','

10392                "P_34"

10393             ','

10394                "P_35"

10395             ','

10396                "P_36"

10397             ','

10398                "P_37"

10399             ','

10400                "P_38"

10401             ','

10402                "P_39"

10403             ','

10404                "P_40"

10405             ','

10406                "P_41"

10407             ','

10408                "P_42"

10409             ','

10410                "P_43"

10411             ','

10412                "P_44"

10413             ','

10414                "P_45"

10415             ','

10416                "P_46"

10417             ','

10418                "P_47"

10419             ','

10420                "P_48"

10421             ','

10422                "P_49"

10423             ','

10424                "P_50"

10425             ','

10426                "P_51"

10427             ','

10428                "P_52"

10429             ','

10430                "P_53"

10431             ','

10432                "P_54"

10433             ','

10434                "P_55"

10435             ','

10436                "P_56"

10437             ','

10438                "P_57"

10439             ','

1047                                                       The SAS
System                            15:50 Friday, November 21, 2008

10440                "P_58"

10441             ','

10442                "P_59"

10443             ','

10444                "P_60"

10445             ','

10446                "P_61"

10447             ','

10448                "P_62"

10449             ','

10450                "P_63"

10451             ','

10452                "P_64"

10453             ','

10454                "P_65"

10455             ','

10456                "P_66"

10457             ','

10458                "P_67"

10459             ','

10460                "P_68"

10461             ','

10462                "P_69"

10463             ','

10464                "P_70"

10465             ','

10466                "P_71"

10467             ','

10468                "P_72"

10469             ','

10470                "P_73"

10471             ','

10472                "P_74"

10473             ','

10474                "P_75"

10475             ','

10476                "P_76"

10477             ','

10478                "P_77"

10479             ','

10480                "P_78"

10481             ','

10482                "P_79"

10483             ','

10484                "P_80"

10485             ','

10486                "P_81"

10487             ','

10488                "P_82"

10489             ','

10490                "P_83"

10491             ','

10492                "P_84"

10493             ','

1048                                                       The SAS
System                            15:50 Friday, November 21, 2008

10494                "P_85"

10495             ','

10496                "P_86"

10497             ','

10498                "P_87"

10499             ','

10500                "P_88"

10501             ','

10502                "P_89"

10503             ','

10504                "P_90"

10505             ','

10506                "P_91"

10507             ','

10508                "P_92"

10509             ','

10510                "P_93"

10511             ','

10512                "P_94"

10513             ','

10514                "P_95"

10515             ','

10516                "P_96"

10517             ','

10518                "P_97"

10519             ','

10520                "P_98"

10521             ','

10522                "P_99"

10523             ;

10524           end;

10525         set  TEMP4.HIGH_NS   end=EFIEOD;

10526             format P_A best12. ;

10527             format P_100 best12. ;

10528             format P_0 best12. ;

10529             format P_1 best12. ;

10530             format P_2 best12. ;

10531             format P_3 best12. ;

10532             format P_4 best12. ;

10533             format P_5 best12. ;

10534             format P_6 best12. ;

10535             format P_7 best12. ;

10536             format P_8 best12. ;

10537             format P_9 best12. ;

10538             format P_10 best12. ;

10539             format P_11 best12. ;

10540             format P_12 best12. ;

10541             format P_13 best12. ;

10542             format P_14 best12. ;

10543             format P_15 best12. ;

10544             format P_16 best12. ;

10545             format P_17 best12. ;

10546             format P_18 best12. ;

10547             format P_19 best12. ;

1049                                                       The SAS
System                            15:50 Friday, November 21, 2008

10548             format P_20 best12. ;

10549             format P_21 best12. ;

10550             format P_22 best12. ;

10551             format P_23 best12. ;

10552             format P_24 best12. ;

10553             format P_25 best12. ;

10554             format P_26 best12. ;

10555             format P_27 best12. ;

10556             format P_28 best12. ;

10557             format P_29 best12. ;

10558             format P_30 best12. ;

10559             format P_31 best12. ;

10560             format P_32 best12. ;

10561             format P_33 best12. ;

10562             format P_34 best12. ;

10563             format P_35 best12. ;

10564             format P_36 best12. ;

10565             format P_37 best12. ;

10566             format P_38 best12. ;

10567             format P_39 best12. ;

10568             format P_40 best12. ;

10569             format P_41 best12. ;

10570             format P_42 best12. ;

10571             format P_43 best12. ;

10572             format P_44 best12. ;

10573             format P_45 best12. ;

10574             format P_46 best12. ;

10575             format P_47 best12. ;

10576             format P_48 best12. ;

10577             format P_49 best12. ;

10578             format P_50 best12. ;

10579             format P_51 best12. ;

10580             format P_52 best12. ;

10581             format P_53 best12. ;

10582             format P_54 best12. ;

10583             format P_55 best12. ;

10584             format P_56 best12. ;

10585             format P_57 best12. ;

10586             format P_58 best12. ;

10587             format P_59 best12. ;

10588             format P_60 best12. ;

10589             format P_61 best12. ;

10590             format P_62 best12. ;

10591             format P_63 best12. ;

10592             format P_64 best12. ;

10593             format P_65 best12. ;

10594             format P_66 best12. ;

10595             format P_67 best12. ;

10596             format P_68 best12. ;

10597             format P_69 best12. ;

10598             format P_70 best12. ;

10599             format P_71 best12. ;

10600             format P_72 best12. ;

10601             format P_73 best12. ;

1050                                                       The SAS
System                            15:50 Friday, November 21, 2008

10602             format P_74 best12. ;

10603             format P_75 best12. ;

10604             format P_76 best12. ;

10605             format P_77 best12. ;

10606             format P_78 best12. ;

10607             format P_79 best12. ;

10608             format P_80 best12. ;

10609             format P_81 best12. ;

10610             format P_82 best12. ;

10611             format P_83 best12. ;

10612             format P_84 best12. ;

10613             format P_85 best12. ;

10614             format P_86 best12. ;

10615             format P_87 best12. ;

10616             format P_88 best12. ;

10617             format P_89 best12. ;

10618             format P_90 best12. ;

10619             format P_91 best12. ;

10620             format P_92 best12. ;

10621             format P_93 best12. ;

10622             format P_94 best12. ;

10623             format P_95 best12. ;

10624             format P_96 best12. ;

10625             format P_97 best12. ;

10626             format P_98 best12. ;

10627             format P_99 best12. ;

10628           do;

10629             EFIOUT + 1;

10630             put P_A @;

10631             put P_100 @;

10632             put P_0 @;

10633             put P_1 @;

10634             put P_2 @;

10635             put P_3 @;

10636             put P_4 @;

10637             put P_5 @;

10638             put P_6 @;

10639             put P_7 @;

10640             put P_8 @;

10641             put P_9 @;

10642             put P_10 @;

10643             put P_11 @;

10644             put P_12 @;

10645             put P_13 @;

10646             put P_14 @;

10647             put P_15 @;

10648             put P_16 @;

10649             put P_17 @;

10650             put P_18 @;

10651             put P_19 @;

10652             put P_20 @;

10653             put P_21 @;

10654             put P_22 @;

10655             put P_23 @;

1051                                                       The SAS
System                            15:50 Friday, November 21, 2008

10656             put P_24 @;

10657             put P_25 @;

10658             put P_26 @;

10659             put P_27 @;

10660             put P_28 @;

10661             put P_29 @;

10662             put P_30 @;

10663             put P_31 @;

10664             put P_32 @;

10665             put P_33 @;

10666             put P_34 @;

10667             put P_35 @;

10668             put P_36 @;

10669             put P_37 @;

10670             put P_38 @;

10671             put P_39 @;

10672             put P_40 @;

10673             put P_41 @;

10674             put P_42 @;

10675             put P_43 @;

10676             put P_44 @;

10677             put P_45 @;

10678             put P_46 @;

10679             put P_47 @;

10680             put P_48 @;

10681             put P_49 @;

10682             put P_50 @;

10683             put P_51 @;

10684             put P_52 @;

10685             put P_53 @;

10686             put P_54 @;

10687             put P_55 @;

10688             put P_56 @;

10689             put P_57 @;

10690             put P_58 @;

10691             put P_59 @;

10692             put P_60 @;

10693             put P_61 @;

10694             put P_62 @;

10695             put P_63 @;

10696             put P_64 @;

10697             put P_65 @;

10698             put P_66 @;

10699             put P_67 @;

10700             put P_68 @;

10701             put P_69 @;

10702             put P_70 @;

10703             put P_71 @;

10704             put P_72 @;

10705             put P_73 @;

10706             put P_74 @;

10707             put P_75 @;

10708             put P_76 @;

10709             put P_77 @;

1052                                                       The SAS
System                            15:50 Friday, November 21, 2008

10710             put P_78 @;

10711             put P_79 @;

10712             put P_80 @;

10713             put P_81 @;

10714             put P_82 @;

10715             put P_83 @;

10716             put P_84 @;

10717             put P_85 @;

10718             put P_86 @;

10719             put P_87 @;

10720             put P_88 @;

10721             put P_89 @;

10722             put P_90 @;

10723             put P_91 @;

10724             put P_92 @;

10725             put P_93 @;

10726             put P_94 @;

10727             put P_95 @;

10728             put P_96 @;

10729             put P_97 @;

10730             put P_98 @;

10731             put P_99 ;

10732             ;

10733           end;

10734          if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

10735          if EFIEOD then call symputx('_EFIREC_',EFIOUT);

10736          run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_NS.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_NS.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:53:32,

      Create Time=21Nov2008:16:53:32

NOTE: 2 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_NS.csv'.

      The minimum record length was 499.

      The maximum record length was 1311.

NOTE: There were 1 observations read from the data set TEMP4.HIGH_NS.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

1 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_NS.csv from TEMP4.HIGH_NS.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_NS.csv" file was successfully created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: Deleting WORK.D10 (memtype=DATA).

1053                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.D11 (memtype=DATA).

NOTE: Deleting WORK.D2 (memtype=DATA).

NOTE: Deleting WORK.D3 (memtype=DATA).

NOTE: Deleting WORK.D4 (memtype=DATA).

NOTE: Deleting WORK.D5 (memtype=DATA).

NOTE: Deleting WORK.D6 (memtype=DATA).

NOTE: Deleting WORK.D7 (memtype=DATA).

NOTE: Deleting WORK.D8 (memtype=DATA).

NOTE: Deleting WORK.D9 (memtype=DATA).

NOTE: Deleting WORK.X (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Copying TEMP3.HIGHCOMM3 to WORK.HIGHCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHCOMM3.

NOTE: The data set WORK.HIGHCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHCRUISE3 to WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHCRUISE3.

NOTE: The data set WORK.HIGHCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFBARGE3 to WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFBARGE3.

NOTE: The data set WORK.HIGHFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHFSHIPS3 to WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHFSHIPS3.

NOTE: The data set WORK.HIGHFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHPASS3 to WORK.HIGHPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHPASS3.

NOTE: The data set WORK.HIGHPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHREC3 to WORK.HIGHREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.HIGHREC3.

NOTE: The data set WORK.HIGHREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.HIGHTBARGE3 to WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTBARGE3.

NOTE: The data set WORK.HIGHTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHTSHIPS3 to WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHTSHIPS3.

NOTE: The data set WORK.HIGHTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.HIGHUTILITY3 to WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.HIGHUTILITY3.

NOTE: The data set WORK.HIGHUTILITY3 has 11 observations and 1
variables.

NOTE: Copying TEMP3.LOWCOMM3 to WORK.LOWCOMM3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWCOMM3.

NOTE: The data set WORK.LOWCOMM3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWCRUISE3 to WORK.LOWCRUISE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWCRUISE3.

NOTE: The data set WORK.LOWCRUISE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFBARGE3 to WORK.LOWFBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWFBARGE3.

NOTE: The data set WORK.LOWFBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWFSHIPS3 to WORK.LOWFSHIPS3 (memtype=DATA).

1054                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set
TEMP3.LOWFSHIPS3.

NOTE: The data set WORK.LOWFSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWPASS3 to WORK.LOWPASS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWPASS3.

NOTE: The data set WORK.LOWPASS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWREC3 to WORK.LOWREC3 (memtype=DATA).

NOTE: There were 11 observations read from the data set TEMP3.LOWREC3.

NOTE: The data set WORK.LOWREC3 has 11 observations and 0 variables.

NOTE: Copying TEMP3.LOWTBARGE3 to WORK.LOWTBARGE3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTBARGE3.

NOTE: The data set WORK.LOWTBARGE3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWTSHIPS3 to WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWTSHIPS3.

NOTE: The data set WORK.LOWTSHIPS3 has 11 observations and 1 variables.

NOTE: Copying TEMP3.LOWUTILITY3 to WORK.LOWUTILITY3 (memtype=DATA).

NOTE: There were 11 observations read from the data set
TEMP3.LOWUTILITY3.

NOTE: The data set WORK.LOWUTILITY3 has 11 observations and 1 variables.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.03 seconds

      cpu time            0.03 seconds

      

NOTE: Deleting TEMP.HIGHOUTDATA_NS (memtype=DATA).

NOTE: Deleting TEMP.HIGH_NS (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.N (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: The file WORK.D1 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A1 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

1055                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A1 to WORK.D1.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 11 observations read from the data set WORK.A1.

NOTE: The data set WORK.D1 has 11 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A2 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A2.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 22 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

1056                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A3 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A3.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 33 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A4 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A4.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 44 observations and 2 variables.

1057                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A5 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A5 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A5.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 55 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

1058                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A6 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A6.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 66 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A7 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A7.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 77 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

1059                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A8 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A8.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 88 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A9 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

1060                                                       The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A9.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 99 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A10 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A10.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 110 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

1061                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set
WORK.HIGHUTILITY3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 11 observations read from the data set WORK.HIGHPASS3.

NOTE: The data set WORK.A11 has 11 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D1.

NOTE: There were 11 observations read from the data set WORK.A11.

NOTE: 11 observations added.

NOTE: The data set WORK.D1 has 121 observations and 2 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D1B (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A1 has 121 observations and 3 variables.

1062                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D1B.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 121 observations read from the data set WORK.A1.

NOTE: The data set WORK.D1B has 121 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A2 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A2.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 242 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

1063                                                       The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A3 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A3.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 363 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A4 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

1064                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A4 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A4.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 484 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A5 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A5.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 605 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

1065                                                       The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A6 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A6.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 726 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A7 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A7.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 847 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

1066                                                       The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A8 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A8.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 968 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

1067                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A9 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A9.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 1089 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A10 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A10.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 1210 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

1068                                                       The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHTBARGE3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 121 observations read from the data set WORK.D1.

NOTE: The data set WORK.A11 has 121 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D1B.

NOTE: There were 121 observations read from the data set WORK.A11.

NOTE: 121 observations added.

NOTE: The data set WORK.D1B has 1331 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D1A (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D6 (memtype=DATA) was not found, but appears on a
DELETE statement.

1069                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A1 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D6.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 1331 observations read from the data set WORK.A1.

NOTE: The data set WORK.D6 has 1331 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A2 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

1070                                                       The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A2.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 2662 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A3 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A3.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 3993 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

1071                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 11 observations read from the data set WORK.HIGHREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A4 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A4.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 5324 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A5 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A5.

1072                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 6655 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A6 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A6 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A6.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 7986 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

1073                                                       The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A7 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A7.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 9317 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A8 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A8.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 10648 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

1074                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A9 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A9.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 11979 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A10 has 1331 observations and 3 variables.

1075                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A10.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 13310 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set WORK.HIGHREC3.

NOTE: The data set WORK.N has 1 observations and 0 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 1331 observations read from the data set WORK.D1B.

NOTE: The data set WORK.A11 has 1331 observations and 3 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Appending WORK.A11 to WORK.D6.

NOTE: There were 1331 observations read from the data set WORK.A11.

NOTE: 1331 observations added.

NOTE: The data set WORK.D6 has 14641 observations and 3 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

1076                                                       The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Deleting WORK.D1B (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D7 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D2 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D9 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A1 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A1 to WORK.D9.

NOTE: BASE data set does not exist. DATA file is being copied to BASE
file.

NOTE: There were 14641 observations read from the data set WORK.A1.

NOTE: The data set WORK.D9 has 14641 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

1077                                                       The SAS
System                            15:50 Friday, November 21, 2008

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A1 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A2 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A2 to WORK.D9.

NOTE: There were 14641 observations read from the data set WORK.A2.

NOTE: 14641 observations added.

NOTE: The data set WORK.D9 has 29282 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

1078                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A3 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A3 to WORK.D9.

NOTE: There were 14641 observations read from the data set WORK.A3.

NOTE: 14641 observations added.

NOTE: The data set WORK.D9 has 43923 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A4 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A4 to WORK.D9.

NOTE: There were 14641 observations read from the data set WORK.A4.

NOTE: 14641 observations added.

NOTE: The data set WORK.D9 has 58564 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

1079                                                       The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A5 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A5 to WORK.D9.

NOTE: There were 14641 observations read from the data set WORK.A5.

NOTE: 14641 observations added.

NOTE: The data set WORK.D9 has 73205 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A6 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

1080                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: Appending WORK.A6 to WORK.D9.

NOTE: There were 14641 observations read from the data set WORK.A6.

NOTE: 14641 observations added.

NOTE: The data set WORK.D9 has 87846 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A7 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A7 to WORK.D9.

NOTE: There were 14641 observations read from the data set WORK.A7.

NOTE: 14641 observations added.

NOTE: The data set WORK.D9 has 102487 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A7 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

1081                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A8 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A8 to WORK.D9.

NOTE: There were 14641 observations read from the data set WORK.A8.

NOTE: 14641 observations added.

NOTE: The data set WORK.D9 has 117128 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A8 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A9 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A9 to WORK.D9.

NOTE: There were 14641 observations read from the data set WORK.A9.

NOTE: 14641 observations added.

NOTE: The data set WORK.D9 has 131769 observations and 4 variables.

1082                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A10 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A10 to WORK.D9.

NOTE: There were 14641 observations read from the data set WORK.A10.

NOTE: 14641 observations added.

NOTE: The data set WORK.D9 has 146410 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A10 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 11 observations read from the data set
WORK.HIGHFSHIPS3.

NOTE: The data set WORK.N has 1 observations and 1 variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

1083                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: There were 1 observations read from the data set WORK.N.

NOTE: There were 14641 observations read from the data set WORK.D6.

NOTE: The data set WORK.A11 has 14641 observations and 4 variables.

NOTE: DATA statement used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Appending WORK.A11 to WORK.D9.

NOTE: There were 14641 observations read from the data set WORK.A11.

NOTE: 14641 observations added.

NOTE: The data set WORK.D9 has 161051 observations and 4 variables.

NOTE: PROCEDURE APPEND used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.A11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.D6 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: The file WORK.D3 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 161051 observations read from the data set WORK.D9.

NOTE: The data set TEMP.HIGH_OT has 161051 observations and 5 variables.

NOTE: DATA statement used (Total process time):

      real time           0.04 seconds

      cpu time            0.04 seconds

      

NOTE: Deleting WORK.D9 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

1084                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: The file WORK.D10 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D4 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D8 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: The file WORK.D5 (memtype=DATA) was not found, but appears on a
DELETE statement.

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Deleting WORK.HIGHCOMM3 (memtype=DATA).

NOTE: Deleting WORK.HIGHCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHPASS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHREC3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.HIGHTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.HIGHUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.LOWCOMM3 (memtype=DATA).

NOTE: Deleting WORK.LOWCRUISE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWFSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWPASS3 (memtype=DATA).

NOTE: Deleting WORK.LOWREC3 (memtype=DATA).

NOTE: Deleting WORK.LOWTBARGE3 (memtype=DATA).

NOTE: Deleting WORK.LOWTSHIPS3 (memtype=DATA).

NOTE: Deleting WORK.LOWUTILITY3 (memtype=DATA).

NOTE: Deleting WORK.N (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: Table WORK.LARGE2 created, with 161051 rows and 14 columns.

NOTE: PROCEDURE SQL used (Total process time):

1085                                                       The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.73 seconds

      cpu time            0.21 seconds

      

NOTE: Variable cs_cost is uninitialized.

NOTE: Variable cf_cost is uninitialized.

NOTE: Variable fb_cost is uninitialized.

NOTE: Variable rs_cost is uninitialized.

NOTE: Variable ts_cost is uninitialized.

NOTE: Missing values were generated as a result of performing an
operation on missing values.

      Each place is given by: (Number of times) at (Line):(Column).

      161051 at 10736:140   161051 at 10736:164   161051 at 10736:188  
161051 at 10736:16    161051 at 10736:64

NOTE: There were 161051 observations read from the data set WORK.LARGE2.

NOTE: The data set WORK.LARGE3 has 161051 observations and 20 variables.

NOTE: DATA statement used (Total process time):

      real time           0.18 seconds

      cpu time            0.18 seconds

      

NOTE: Deleting WORK.LARGE2 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.LARGE3A created, with 161051 rows and 31 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           2.48 seconds

      cpu time            0.39 seconds

      

NOTE: Deleting WORK.LARGE3 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 161051 observations read from the data set
WORK.LARGE3A.

NOTE: The data set WORK.LARGE3B has 161051 observations and 43
variables.

NOTE: DATA statement used (Total process time):

      real time           0.21 seconds

      cpu time            0.21 seconds

      

NOTE: Deleting WORK.LARGE3A (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

1086                                                       The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Table WORK.LARGE4 created, with 161051 rows and 34 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.29 seconds

      cpu time            0.36 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set TEMP4.LARGE4 has 161051 observations and 34
variables.

NOTE: DATA statement used (Total process time):

      real time           0.14 seconds

      cpu time            0.14 seconds

      

NOTE: Deleting WORK.LARGE3B (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L1 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           1.09 seconds

      cpu time            0.04 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L2 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           1.10 seconds

      cpu time            0.06 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L3 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L4 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.07 seconds

      cpu time            0.07 seconds

1087                                                       The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L5 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L6 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L7 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.07 seconds

      cpu time            0.07 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L8 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L9 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L10 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           0.07 seconds

      cpu time            0.07 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.L11 has 161051 observations and 2 variables.

NOTE: DATA statement used (Total process time):

1088                                                       The SAS
System                            15:50 Friday, November 21, 2008

      real time           0.06 seconds

      cpu time            0.06 seconds

      

NOTE: There were 161051 observations read from the data set WORK.L1.

NOTE: There were 161051 observations read from the data set WORK.L2.

NOTE: There were 161051 observations read from the data set WORK.L3.

NOTE: There were 161051 observations read from the data set WORK.L4.

NOTE: There were 161051 observations read from the data set WORK.L5.

NOTE: There were 161051 observations read from the data set WORK.L6.

NOTE: There were 161051 observations read from the data set WORK.L7.

NOTE: There were 161051 observations read from the data set WORK.L8.

NOTE: There were 161051 observations read from the data set WORK.L9.

NOTE: There were 161051 observations read from the data set WORK.L10.

NOTE: There were 161051 observations read from the data set WORK.L11.

NOTE: The data set WORK.L has 1771561 observations and 2 variables.

NOTE: DATA statement used (Total process time):

      real time           1.86 seconds

      cpu time            0.32 seconds

      

NOTE: Deleting WORK.L1 (memtype=DATA).

NOTE: Deleting WORK.L2 (memtype=DATA).

NOTE: Deleting WORK.L3 (memtype=DATA).

NOTE: Deleting WORK.L4 (memtype=DATA).

NOTE: Deleting WORK.L5 (memtype=DATA).

NOTE: Deleting WORK.L6 (memtype=DATA).

NOTE: Deleting WORK.L7 (memtype=DATA).

NOTE: Deleting WORK.L8 (memtype=DATA).

NOTE: Deleting WORK.L9 (memtype=DATA).

NOTE: Deleting WORK.L10 (memtype=DATA).

NOTE: Deleting WORK.L11 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1771561 observations read from the data set WORK.L.

NOTE: The data set WORK.L has 1771561 observations and 2 variables.

NOTE: PROCEDURE SORT used (Total process time):

      real time           1.35 seconds

      cpu time            1.45 seconds

      

NOTE: The data set TEMP4.HIGH_OT has 1 observations and 102 variables.

NOTE: PROCEDURE UNIVARIATE used (Total process time):

      real time           0.98 seconds

      cpu time            0.54 seconds

      

NOTE: Deleting WORK.L (memtype=DATA).

1089                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 161051 observations read from the data set WORK.LARGE4.

NOTE: The data set WORK.LARGE5 has 161051 observations and 46 variables.

NOTE: DATA statement used (Total process time):

      real time           0.34 seconds

      cpu time            0.34 seconds

      

NOTE: Deleting WORK.LARGE4 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D1 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.12 seconds

      cpu time            0.18 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D2 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.10 seconds

      cpu time            0.17 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D3 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.09 seconds

      cpu time            0.14 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D4 created, with 1 rows and 3 columns.

1090                                                       The SAS
System                            15:50 Friday, November 21, 2008

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.09 seconds

      cpu time            0.17 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D5 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.09 seconds

      cpu time            0.17 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D6 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.11 seconds

      cpu time            0.17 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D7 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           1.21 seconds

      cpu time            0.14 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D8 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           1.04 seconds

      cpu time            0.20 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D9 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.42 seconds

      cpu time            0.15 seconds

1091                                                       The SAS
System                            15:50 Friday, November 21, 2008

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D10 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.09 seconds

      cpu time            0.17 seconds

      

NOTE: Table WORK.X created, with 1 rows and 3 columns.

NOTE: The query requires remerging summary statistics back with the
original data.

NOTE: Table WORK.D11 created, with 1 rows and 3 columns.

NOTE: PROCEDURE SQL used (Total process time):

      real time           0.10 seconds

      cpu time            0.17 seconds

      

NOTE: Deleting WORK.LARGE5 (memtype=DATA).

NOTE: PROCEDURE DATASETS used (Total process time):

      real time           0.00 seconds

      cpu time            0.00 seconds

      

NOTE: There were 1 observations read from the data set WORK.D1.

NOTE: There were 1 observations read from the data set WORK.D2.

NOTE: There were 1 observations read from the data set WORK.D3.

NOTE: There were 1 observations read from the data set WORK.D4.

NOTE: There were 1 observations read from the data set WORK.D5.

NOTE: There were 1 observations read from the data set WORK.D6.

NOTE: There were 1 observations read from the data set WORK.D7.

NOTE: There were 1 observations read from the data set WORK.D8.

NOTE: There were 1 observations read from the data set WORK.D9.

NOTE: There were 1 observations read from the data set WORK.D10.

NOTE: There were 1 observations read from the data set WORK.D11.

NOTE: The data set TEMP.HIGHOUTDATA_OT has 1 observations and 13
variables.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

10737      
/**********************************************************************

10738       *   PRODUCT:   SAS

10739       *   VERSION:   9.2

10740       *   CREATOR:   External File Interface

10741       *   DATE:      21NOV08

10742       *   DESC:      Generated SAS Datastep Code

1092                                                       The SAS
System                            15:50 Friday, November 21, 2008

10743       *   TEMPLATE SOURCE:  (None Specified.)

10744      
***********************************************************************/

10745          data _null_;

10746          %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

10747          %let _EFIREC_ = 0;     /* clear export record count macro
variable */

10748          file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_OT.csv' delimiter=',' DSD

10748    ! DROPOVER lrecl=32767;

10749          if _n_ = 1 then        /* write column names or labels */

10750           do;

10751             put

10752                "NAICS"

10753             ','

10754                "D"

10755             ','

10756                "percent1"

10757             ','

10758                "percent2"

10759             ','

10760                "percent3"

10761             ','

10762                "percent4"

10763             ','

10764                "percent5"

10765             ','

10766                "percent6"

10767             ','

10768                "percent7"

10769             ','

10770                "percent8"

10771             ','

10772                "percent9"

10773             ','

10774                "percent10"

10775             ','

10776                "percent11"

10777             ;

10778           end;

10779         set  TEMP.HIGHOUTDATA_OT   end=EFIEOD;

10780             format NAICS $16. ;

10781             format D best12. ;

10782             format percent1 percent8.2 ;

10783             format percent2 percent8.2 ;

10784             format percent3 percent8.2 ;

10785             format percent4 percent8.2 ;

10786             format percent5 percent8.2 ;

10787             format percent6 percent8.2 ;

10788             format percent7 percent8.2 ;

10789             format percent8 percent8.2 ;

10790             format percent9 percent8.2 ;

10791             format percent10 percent8.2 ;

10792             format percent11 percent8.2 ;

10793           do;

10794             EFIOUT + 1;

10795             put NAICS $ @;

1093                                                       The SAS
System                            15:50 Friday, November 21, 2008

10796             put D @;

10797             put percent1 @;

10798             put percent2 @;

10799             put percent3 @;

10800             put percent4 @;

10801             put percent5 @;

10802             put percent6 @;

10803             put percent7 @;

10804             put percent8 @;

10805             put percent9 @;

10806             put percent10 @;

10807             put percent11 ;

10808             ;

10809           end;

10810          if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

10811          if EFIEOD then call symputx('_EFIREC_',EFIOUT);

10812          run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_OT.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_OT.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:53:48,

      Create Time=21Nov2008:16:53:48

NOTE: 2 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_OT.csv'.

      The minimum record length was 85.

      The maximum record length was 108.

NOTE: There were 1 observations read from the data set
TEMP.HIGHOUTDATA_OT.

NOTE: At least one W.D format was too small for the number to be
printed. The decimal may be shifted by the "BEST" format.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.00 seconds

      

1 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_OT.csv from TEMP.HIGHOUTDATA_OT.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\DAO11_Highthresholds_OT.csv" file was successfully
created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.04 seconds

      cpu time            0.03 seconds

      

10813      
/**********************************************************************

10814       *   PRODUCT:   SAS

10815       *   VERSION:   9.2

10816       *   CREATOR:   External File Interface

10817       *   DATE:      21NOV08

10818       *   DESC:      Generated SAS Datastep Code

10819       *   TEMPLATE SOURCE:  (None Specified.)

10820      
***********************************************************************/

10821          data _null_;

10822          %let _EFIERR_ = 0; /* set the ERROR detection macro
variable */

1094                                                       The SAS
System                            15:50 Friday, November 21, 2008

10823          %let _EFIREC_ = 0;     /* clear export record count macro
variable */

10824          file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_OT.csv' delimiter=',' DSD DROPOVER

10824    ! lrecl=32767;

10825          if _n_ = 1 then        /* write column names or labels */

10826           do;

10827             put

10828                "P_A"

10829             ','

10830                "P_100"

10831             ','

10832                "P_0"

10833             ','

10834                "P_1"

10835             ','

10836                "P_2"

10837             ','

10838                "P_3"

10839             ','

10840                "P_4"

10841             ','

10842                "P_5"

10843             ','

10844                "P_6"

10845             ','

10846                "P_7"

10847             ','

10848                "P_8"

10849             ','

10850                "P_9"

10851             ','

10852                "P_10"

10853             ','

10854                "P_11"

10855             ','

10856                "P_12"

10857             ','

10858                "P_13"

10859             ','

10860                "P_14"

10861             ','

10862                "P_15"

10863             ','

10864                "P_16"

10865             ','

10866                "P_17"

10867             ','

10868                "P_18"

10869             ','

10870                "P_19"

10871             ','

10872                "P_20"

10873             ','

10874                "P_21"

10875             ','

1095                                                       The SAS
System                            15:50 Friday, November 21, 2008

10876                "P_22"

10877             ','

10878                "P_23"

10879             ','

10880                "P_24"

10881             ','

10882                "P_25"

10883             ','

10884                "P_26"

10885             ','

10886                "P_27"

10887             ','

10888                "P_28"

10889             ','

10890                "P_29"

10891             ','

10892                "P_30"

10893             ','

10894                "P_31"

10895             ','

10896                "P_32"

10897             ','

10898                "P_33"

10899             ','

10900                "P_34"

10901             ','

10902                "P_35"

10903             ','

10904                "P_36"

10905             ','

10906                "P_37"

10907             ','

10908                "P_38"

10909             ','

10910                "P_39"

10911             ','

10912                "P_40"

10913             ','

10914                "P_41"

10915             ','

10916                "P_42"

10917             ','

10918                "P_43"

10919             ','

10920                "P_44"

10921             ','

10922                "P_45"

10923             ','

10924                "P_46"

10925             ','

10926                "P_47"

10927             ','

10928                "P_48"

10929             ','

1096                                                       The SAS
System                            15:50 Friday, November 21, 2008

10930                "P_49"

10931             ','

10932                "P_50"

10933             ','

10934                "P_51"

10935             ','

10936                "P_52"

10937             ','

10938                "P_53"

10939             ','

10940                "P_54"

10941             ','

10942                "P_55"

10943             ','

10944                "P_56"

10945             ','

10946                "P_57"

10947             ','

10948                "P_58"

10949             ','

10950                "P_59"

10951             ','

10952                "P_60"

10953             ','

10954                "P_61"

10955             ','

10956                "P_62"

10957             ','

10958                "P_63"

10959             ','

10960                "P_64"

10961             ','

10962                "P_65"

10963             ','

10964                "P_66"

10965             ','

10966                "P_67"

10967             ','

10968                "P_68"

10969             ','

10970                "P_69"

10971             ','

10972                "P_70"

10973             ','

10974                "P_71"

10975             ','

10976                "P_72"

10977             ','

10978                "P_73"

10979             ','

10980                "P_74"

10981             ','

10982                "P_75"

10983             ','

1097                                                       The SAS
System                            15:50 Friday, November 21, 2008

10984                "P_76"

10985             ','

10986                "P_77"

10987             ','

10988                "P_78"

10989             ','

10990                "P_79"

10991             ','

10992                "P_80"

10993             ','

10994                "P_81"

10995             ','

10996                "P_82"

10997             ','

10998                "P_83"

10999             ','

11000                "P_84"

11001             ','

11002                "P_85"

11003             ','

11004                "P_86"

11005             ','

11006                "P_87"

11007             ','

11008                "P_88"

11009             ','

11010                "P_89"

11011             ','

11012                "P_90"

11013             ','

11014                "P_91"

11015             ','

11016                "P_92"

11017             ','

11018                "P_93"

11019             ','

11020                "P_94"

11021             ','

11022                "P_95"

11023             ','

11024                "P_96"

11025             ','

11026                "P_97"

11027             ','

11028                "P_98"

11029             ','

11030                "P_99"

11031             ;

11032           end;

11033         set  TEMP4.HIGH_OT   end=EFIEOD;

11034             format P_A best12. ;

11035             format P_100 best12. ;

11036             format P_0 best12. ;

11037             format P_1 best12. ;

1098                                                       The SAS
System                            15:50 Friday, November 21, 2008

11038             format P_2 best12. ;

11039             format P_3 best12. ;

11040             format P_4 best12. ;

11041             format P_5 best12. ;

11042             format P_6 best12. ;

11043             format P_7 best12. ;

11044             format P_8 best12. ;

11045             format P_9 best12. ;

11046             format P_10 best12. ;

11047             format P_11 best12. ;

11048             format P_12 best12. ;

11049             format P_13 best12. ;

11050             format P_14 best12. ;

11051             format P_15 best12. ;

11052             format P_16 best12. ;

11053             format P_17 best12. ;

11054             format P_18 best12. ;

11055             format P_19 best12. ;

11056             format P_20 best12. ;

11057             format P_21 best12. ;

11058             format P_22 best12. ;

11059             format P_23 best12. ;

11060             format P_24 best12. ;

11061             format P_25 best12. ;

11062             format P_26 best12. ;

11063             format P_27 best12. ;

11064             format P_28 best12. ;

11065             format P_29 best12. ;

11066             format P_30 best12. ;

11067             format P_31 best12. ;

11068             format P_32 best12. ;

11069             format P_33 best12. ;

11070             format P_34 best12. ;

11071             format P_35 best12. ;

11072             format P_36 best12. ;

11073             format P_37 best12. ;

11074             format P_38 best12. ;

11075             format P_39 best12. ;

11076             format P_40 best12. ;

11077             format P_41 best12. ;

11078             format P_42 best12. ;

11079             format P_43 best12. ;

11080             format P_44 best12. ;

11081             format P_45 best12. ;

11082             format P_46 best12. ;

11083             format P_47 best12. ;

11084             format P_48 best12. ;

11085             format P_49 best12. ;

11086             format P_50 best12. ;

11087             format P_51 best12. ;

11088             format P_52 best12. ;

11089             format P_53 best12. ;

11090             format P_54 best12. ;

11091             format P_55 best12. ;

1099                                                       The SAS
System                            15:50 Friday, November 21, 2008

11092             format P_56 best12. ;

11093             format P_57 best12. ;

11094             format P_58 best12. ;

11095             format P_59 best12. ;

11096             format P_60 best12. ;

11097             format P_61 best12. ;

11098             format P_62 best12. ;

11099             format P_63 best12. ;

11100             format P_64 best12. ;

11101             format P_65 best12. ;

11102             format P_66 best12. ;

11103             format P_67 best12. ;

11104             format P_68 best12. ;

11105             format P_69 best12. ;

11106             format P_70 best12. ;

11107             format P_71 best12. ;

11108             format P_72 best12. ;

11109             format P_73 best12. ;

11110             format P_74 best12. ;

11111             format P_75 best12. ;

11112             format P_76 best12. ;

11113             format P_77 best12. ;

11114             format P_78 best12. ;

11115             format P_79 best12. ;

11116             format P_80 best12. ;

11117             format P_81 best12. ;

11118             format P_82 best12. ;

11119             format P_83 best12. ;

11120             format P_84 best12. ;

11121             format P_85 best12. ;

11122             format P_86 best12. ;

11123             format P_87 best12. ;

11124             format P_88 best12. ;

11125             format P_89 best12. ;

11126             format P_90 best12. ;

11127             format P_91 best12. ;

11128             format P_92 best12. ;

11129             format P_93 best12. ;

11130             format P_94 best12. ;

11131             format P_95 best12. ;

11132             format P_96 best12. ;

11133             format P_97 best12. ;

11134             format P_98 best12. ;

11135             format P_99 best12. ;

11136           do;

11137             EFIOUT + 1;

11138             put P_A @;

11139             put P_100 @;

11140             put P_0 @;

11141             put P_1 @;

11142             put P_2 @;

11143             put P_3 @;

11144             put P_4 @;

11145             put P_5 @;

1100                                                       The SAS
System                            15:50 Friday, November 21, 2008

11146             put P_6 @;

11147             put P_7 @;

11148             put P_8 @;

11149             put P_9 @;

11150             put P_10 @;

11151             put P_11 @;

11152             put P_12 @;

11153             put P_13 @;

11154             put P_14 @;

11155             put P_15 @;

11156             put P_16 @;

11157             put P_17 @;

11158             put P_18 @;

11159             put P_19 @;

11160             put P_20 @;

11161             put P_21 @;

11162             put P_22 @;

11163             put P_23 @;

11164             put P_24 @;

11165             put P_25 @;

11166             put P_26 @;

11167             put P_27 @;

11168             put P_28 @;

11169             put P_29 @;

11170             put P_30 @;

11171             put P_31 @;

11172             put P_32 @;

11173             put P_33 @;

11174             put P_34 @;

11175             put P_35 @;

11176             put P_36 @;

11177             put P_37 @;

11178             put P_38 @;

11179             put P_39 @;

11180             put P_40 @;

11181             put P_41 @;

11182             put P_42 @;

11183             put P_43 @;

11184             put P_44 @;

11185             put P_45 @;

11186             put P_46 @;

11187             put P_47 @;

11188             put P_48 @;

11189             put P_49 @;

11190             put P_50 @;

11191             put P_51 @;

11192             put P_52 @;

11193             put P_53 @;

11194             put P_54 @;

11195             put P_55 @;

11196             put P_56 @;

11197             put P_57 @;

11198             put P_58 @;

11199             put P_59 @;

1101                                                       The SAS
System                            15:50 Friday, November 21, 2008

11200             put P_60 @;

11201             put P_61 @;

11202             put P_62 @;

11203             put P_63 @;

11204             put P_64 @;

11205             put P_65 @;

11206             put P_66 @;

11207             put P_67 @;

11208             put P_68 @;

11209             put P_69 @;

11210             put P_70 @;

11211             put P_71 @;

11212             put P_72 @;

11213             put P_73 @;

11214             put P_74 @;

11215             put P_75 @;

11216             put P_76 @;

11217             put P_77 @;

11218             put P_78 @;

11219             put P_79 @;

11220             put P_80 @;

11221             put P_81 @;

11222             put P_82 @;

11223             put P_83 @;

11224             put P_84 @;

11225             put P_85 @;

11226             put P_86 @;

11227             put P_87 @;

11228             put P_88 @;

11229             put P_89 @;

11230             put P_90 @;

11231             put P_91 @;

11232             put P_92 @;

11233             put P_93 @;

11234             put P_94 @;

11235             put P_95 @;

11236             put P_96 @;

11237             put P_97 @;

11238             put P_98 @;

11239             put P_99 ;

11240             ;

11241           end;

11242          if _ERROR_ then call symputx('_EFIERR_',1);  /* set ERROR
detection macro variable */

11243          if EFIEOD then call symputx('_EFIREC_',EFIOUT);

11244          run;

NOTE: The file 'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_OT.csv' is:

      Filename=H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_OT.csv,

      RECFM=V,LRECL=32767,File Size (bytes)=0,

      Last Modified=21Nov2008:16:53:48,

      Create Time=21Nov2008:16:53:48

NOTE: 2 records were written to the file
'H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_OT.csv'.

      The minimum record length was 499.

1102                                                       The SAS
System                            15:50 Friday, November 21, 2008

      The maximum record length was 1317.

NOTE: There were 1 observations read from the data set TEMP4.HIGH_OT.

NOTE: DATA statement used (Total process time):

      real time           0.01 seconds

      cpu time            0.01 seconds

      

1 records created in H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_OT.csv from TEMP4.HIGH_OT.

  

  

NOTE: "H:\Projects\Tyche_Option_1_Task_1-04\SAS
Analysis\Outputs\Dist11_High_OT.csv" file was successfully created.

NOTE: PROCEDURE EXPORT used (Total process time):

      real time           0.06 seconds

      cpu time            0.06 seconds

      

11245      

11246      /*

11247      df

11247    ! 483111/483113
wgt1=0.049,wgt2=0.149,wgt3=0.116,wgt4=0.175,wgt5=0.175,wgt6=0.102,wgt7=0
.114,wgt8=0.074,wgt9=0.047,wgt10=0,

11247    ! wgt11=0

11248      ff 11411		
wgt1=0.286,wgt2=0.481,wgt3=0.118,wgt4=0.089,wgt5=0.014,wgt6=0.012,wgt7=0
,wgt8=0,wgt9=0,wgt10=0,wgt11=0

11249      dp

11249    ! 483112/483114
wgt1=0.134,wgt2=0.197,wgt3=0.142,wgt4=0.079,wgt5=0.205,wgt6=0.142,wgt7=0
.102,wgt8=0,wgt9=0,wgt10=0,wgt11=0

11250      if 483211		
wgt1=0.109,wgt2=0.126,wgt3=0.131,wgt4=0.262,wgt5=0.169,wgt6=0,wgt7=0.115
,wgt8=0.087,wgt9=0,wgt10=0,wgt11=0

11251      ip 483212		
wgt1=0.121,wgt2=0.287,wgt3=0.21,wgt4=0.172,wgt5=0.146,wgt6=0.064,wgt7=0,
wgt8=0,wgt9=0,wgt10=0,wgt11=0

11252      ss 487210		
wgt1=0.258,wgt2=0.273,wgt3=0.199,wgt4=0.127,wgt5=0.084,wgt6=0.039,wgt7=0
.021,wgt8=0,wgt9=0,wgt10=0,wgt11=0

11253      ph

11253    ! 488310		
wgt1=0.098,wgt2=0.098,wgt3=0.154,wgt4=0.146,wgt5=0.203,wgt6=0.146,wgt7=0
,wgt8=0.106,wgt9=0.024,wgt10=0.024,wgt11

11253    ! =0

11254      mc

11254    ! 488320		
wgt1=0.068,wgt2=0.127,wgt3=0.094,wgt4=0.143,wgt5=0.179,wgt6=0.134,wgt7=0
.104,wgt8=0.078,wgt9=0.036,wgt10=0,wgt11

11254    ! =0

11255      ns 488330		
wgt1=0.085,wgt2=0.225,wgt3=0.234,wgt4=0.147,wgt5=0.135,wgt6=0.079,wgt7=0
.056,wgt8=0.04,wgt9=0,wgt10=0,wgt11=0

11256      ot 488390		
wgt1=0.26,wgt2=0.28,wgt3=0.126,wgt4=0.167,wgt5=0.13,wgt6=0,wgt7=0,wgt8=0
.037,wgt9=0,wgt10=0,wgt11=0

11257      */

NOTE: SAS Institute Inc., SAS Campus Drive, Cary, NC USA 27513-2414

NOTE: The SAS System used:

      real time           1:03:34.50

      cpu time            37:59.57

      

