[Federal Register Volume 84, Number 155 (Monday, August 12, 2019)]
[Notices]
[Pages 39835-39841]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-17149]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OPPT-2019-0075; FRL-9992-80]


Certain New Chemicals; Receipt and Status Information for June 
2019

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA), 
as amended by the Frank R. Lautenberg Chemical Safety for the 21st 
Century Act, to make information publicly available and to publish 
information in the Federal Register pertaining to submissions under 
TSCA Section 5, including notice of receipt of a Premanufacture notice 
(PMN), Significant New Use Notice (SNUN) or Microbial Commercial 
Activity Notice (MCAN), including an amended notice or test 
information; an exemption application (Biotech exemption); an 
application for a test marketing exemption (TME), both pending and/or 
concluded; a notice of commencement (NOC) of manufacture (including 
import) for new chemical substances; and a periodic status report on 
new chemical substances that are currently under EPA review or have 
recently concluded review. This document covers the period from 06/01/
2019 to 06/30/2019.

DATES: Comments identified by the specific case number provided in this 
document must be received on or before September 11, 2019.

ADDRESSES: Submit your comments, identified by docket identification 
(ID) number EPA-HQ-OPPT-2019-0075, and the specific case number for the 
chemical substance related to your comment, by one of the following 
methods:
     Federal eRulemaking Portal: http://www.regulations.gov. 
Follow the online instructions for submitting comments. Do not submit 
electronically any information you consider to be Confidential Business 
Information (CBI) or other information whose disclosure is restricted 
by statute.
     Mail: Document Control Office (7407M), Office of Pollution 
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 
Pennsylvania Ave. NW, Washington, DC 20460-0001.
     Hand Delivery: To make special arrangements for hand 
delivery or delivery of boxed information, please follow the 
instructions at http://www.epa.gov/dockets/contacts.html. Additional 
instructions on commenting or visiting the docket, along with more 
information about dockets generally, is available at http://www.epa.gov/dockets.

FOR FURTHER INFORMATION CONTACT:
    For technical information contact: Jim Rahai, Information 
Management Division (MC 7407M), Office of Pollution Prevention and 
Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW, 
Washington, DC 20460-0001; telephone number: (202) 564-8593; email 
address: rahai.jim@epa.gov.
    For general information contact: The TSCA-Hotline, ABVI-Goodwill, 
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 
554-1404; email address: TSCA-Hotline@epa.gov.

SUPPLEMENTARY INFORMATION:

I. Executive Summary

A. What action is the Agency taking?

    This document provides the receipt and status reports for the 
period from 06/01/2019 to 06/30/2019. The Agency is providing notice of 
receipt of PMNs, SNUNs and MCANs (including amended notices and test 
information); an exemption application under 40 CFR part 725 (Biotech 
exemption); TMEs, both pending and/or concluded; NOCs to manufacture a 
new chemical substance; and a periodic status report on new chemical 
substances that are currently under EPA review or have recently 
concluded review.
    EPA is also providing information on its website about cases 
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN 
and exemption notices received, the date of receipt, the final EPA 
determination on the notice, and the effective date of EPA's 
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a 
weekly basis.

B. What is the Agency's authority for taking this action?

    Under the Toxic Substances Control Act (TSCA), 15 U.S.C. 2601 et 
seq., a chemical substance may be either an ``existing'' chemical 
substance or a ``new'' chemical substance. Any chemical substance that 
is not on EPA's TSCA Inventory of Chemical Substances (TSCA Inventory) 
is classified as a ``new chemical substance,'' while a chemical 
substance that is listed on the TSCA Inventory is classified as an 
``existing chemical substance.'' (See TSCA section 3(11).) For more 
information about the TSCA Inventory go to: https://www.epa.gov/tsca-inventory.
    Any person who intends to manufacture (including import) a new 
chemical substance for a non-exempt commercial purpose, or to 
manufacture or process a chemical substance in a non-exempt manner for 
a use that EPA has determined is a significant new use, is required by 
TSCA section 5 to provide EPA with a PMN, MCAN or SNUN, as appropriate, 
before initiating the activity. EPA will review the notice, make a risk 
determination on the chemical substance or significant new

[[Page 39836]]

use, and take appropriate action as described in TSCA section 5(a)(3).
    TSCA section 5(h)(1) authorizes EPA to allow persons, upon 
application and under appropriate restrictions, to manufacture or 
process a new chemical substance, or a chemical substance subject to a 
significant new use rule (SNUR) issued under TSCA section 5(a)(2), for 
``test marketing'' purposes, upon a showing that the manufacture, 
processing, distribution in commerce, use, and disposal of the chemical 
will not present an unreasonable risk of injury to health or the 
environment. This is referred to as a test marketing exemption, or TME. 
For more information about the requirements applicable to a new 
chemical go to: http://www.epa.gov/oppt/newchems.
    Under TSCA sections 5 and 8 and EPA regulations, EPA is required to 
publish in the Federal Register certain information, including notice 
of receipt of a PMN/SNUN/MCAN (including amended notices and test 
information); an exemption application under 40 CFR part 725 (biotech 
exemption); an application for a TME, both pending and concluded; NOCs 
to manufacture a new chemical substance; and a periodic status report 
on the new chemical substances that are currently under EPA review or 
have recently concluded review.

C. Does this action apply to me?

    This action provides information that is directed to the public in 
general.

D. Does this action have any incremental economic impacts or paperwork 
burdens?

    No.

E. What should I consider as I prepare my comments for EPA?

    1. Submitting confidential business information (CBI). Do not 
submit this information to EPA through regulations.gov or email. 
Clearly mark the part or all of the information that you claim to be 
CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark 
the outside of the disk or CD-ROM as CBI and then identify 
electronically within the disk or CD-ROM the specific information that 
is claimed as CBI. In addition to one complete version of the comment 
that includes information claimed as CBI, a copy of the comment that 
does not contain the information claimed as CBI must be submitted for 
inclusion in the public docket. Information so marked will not be 
disclosed except in accordance with procedures set forth in 40 CFR part 
2.
    2. Tips for preparing your comments. When preparing and submitting 
your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html.

II. Status Reports

    In the past, EPA has published individual notices reflecting the 
status of TSCA section 5 filings received, pending or concluded. In 
1995, the Agency modified its approach and streamlined the information 
published in the Federal Register after providing notice of such 
changes to the public and an opportunity to comment (See the Federal 
Register of May 12, 1995, (60 FR 25798) (FRL-4942-7). Since the passage 
of the Lautenberg amendments to TSCA in 2016, public interest in 
information on the status of section 5 cases under EPA review and, in 
particular, the final determination of such cases, has increased. In an 
effort to be responsive to the regulated community, the users of this 
information, and the general public, to comply with the requirements of 
TSCA, to conserve EPA resources and to streamline the process and make 
it more timely, EPA is providing information on its website about cases 
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN 
and exemption notices received, the date of receipt, the final EPA 
determination on the notice, and the effective date of EPA's 
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a 
weekly basis.

III. Receipt Reports

    For the PMN/SNUN/MCANs that have passed an initial screening by EPA 
during this period, Table I provides the following information (to the 
extent that such information is not subject to a CBI claim) on the 
notices screened by EPA during this period: The EPA case number 
assigned to the notice that indicates whether the submission is an 
initial submission, or an amendment, a notation of which version was 
received, the date the notice was received by EPA, the submitting 
manufacturer (i.e., domestic producer or importer), the potential uses 
identified by the manufacturer in the notice, and the chemical 
substance identity.
    As used in each of the tables in this unit, (S) indicates that the 
information in the table is the specific information provided by the 
submitter, and (G) indicates that this information in the table is 
generic information because the specific information provided by the 
submitter was claimed as CBI. Submissions which are initial submissions 
will not have a letter following the case number. Submissions which are 
amendments to previous submissions will have a case number followed by 
the letter ``A'' (e.g., P-18-1234A). The version column designates 
submissions in sequence as ``1'', ``2'', ``3'', etc. Note that in some 
cases, an initial submission is not numbered as version 1; this is 
because earlier version(s) were rejected as incomplete or invalid 
submissions. Note also that future versions of the following tables may 
adjust slightly as the Agency works to automate population of the data 
in the tables.

                        Table I--PMN/SNUN/MCANs Approved * From 06/01/2019 to 06/30/2019
----------------------------------------------------------------------------------------------------------------
                                Received
      Case No.       Version      date         Manufacturer               Use               Chemical substance
----------------------------------------------------------------------------------------------------------------
SN-19-0004A........        4   06/04/2019  CBI................  (S) A lubricating agent  (G) Pitch coke.
                                                                 used in the production
                                                                 of automotive disc
                                                                 brakes.
SN-19-0005A........        2   05/28/2019  Molecular Rebar      (G) Conductive ink.....  (S) Functionalized
                                            Design.                                       multiwall carbon
                                                                                          nanotubes.
P-16-0442A.........        4   06/26/2019  CBI................  (G) Polymer for          (G) Carboxylic acids,
                                                                 coatings.                unsaturated, polymers
                                                                                          with disubstituted
                                                                                          amine, alkanediol,
                                                                                          substituted
                                                                                          alkylpropanoic acid,
                                                                                          alkanedioic acid and
                                                                                          substituted
                                                                                          isocyanatocycloalkane,
                                                                                          compds with
                                                                                          alkylamine.

[[Page 39837]]

 
P-16-0443A.........        4   06/26/2019  CBI................  (G) Polymer for          (G) Carboxylic acids,
                                                                 coatings.                unsaturated,
                                                                                          hydrogenated polymers
                                                                                          with disubstituted
                                                                                          amine, alkanediol,
                                                                                          substituted
                                                                                          alkylpropanoic acid,
                                                                                          alkanedioic acid and
                                                                                          substituted
                                                                                          isocyanatocycloalkane,
                                                                                          compds with
                                                                                          alkylamine.
P-16-0444A.........        4   06/26/2019  CBI................  (G) Polymer for          (G) Amine salted
                                                                 coatings.                polyurethane.
P-16-0445A.........        4   06/26/2019  CBI................  (G) Polymer for          (G) Carboxylic acids,
                                                                 coatings.                unsaturated,
                                                                                          hydrogenated polymers
                                                                                          with substituted
                                                                                          alkanediamine,
                                                                                          alkanediol,
                                                                                          substituted
                                                                                          alkylpropanoic acid,
                                                                                          alkanedioic acid and
                                                                                          substituted
                                                                                          isocyanatocycloalkane,
                                                                                          compds with
                                                                                          alkylamine.
P-17-0007A.........        5   06/13/2019  CBI................  (S) Intermediate.......  (G) Dialkyl 7,10-dioxa,
                                                                                          dithiahexadeca diene.
P-17-0239A.........        6   06/11/2019  CBI................  (G) Adhesive for open    (G) Substituted
                                                                 non-descriptive use.     carboxylic acid,
                                                                                          polymer with 2,4-
                                                                                          diisocyanato-1-
                                                                                          methylbenzene,
                                                                                          hexanedioic acid,
                                                                                          alpha-hydro-omega-
                                                                                          hydroxypoly[oxy(methyl-
                                                                                          1,2-ethanediyl)], 1,1'-
                                                                                          methylenebis[4-
                                                                                          isocyanatobenzene],
                                                                                          2,2'-oxybis[ethanol],
                                                                                          1,1'-oxybis[2-
                                                                                          propanol] and 1,2-
                                                                                          propanediol.
P-17-0299A.........        3   06/06/2019  CBI................  (G) Paint additive.....  (G) 2-Propenoic acid,
                                                                                          alkyl -, polymers with
                                                                                          alkyl acrylate and
                                                                                          polyethylene glycol
                                                                                          methacrylate alkyl
                                                                                          ether.
P-17-0345A.........        2   06/07/2019  CBI................  (G) Resin intermediate.  (G) Polyurethane,
                                                                                          methacrylate blocked.
P-17-0389A.........        6   06/24/2019  CBI................  (G) Polymer precursor..  (G) Alkyl oil, polymer
                                                                                          with 1,4-
                                                                                          cyclohexanedimethanol,
                                                                                          dehydrated Alkyl oil,
                                                                                          hydrogentated rosin,
                                                                                          phthalic anhydride and
                                                                                          trimethylolpropane.
P-18-0009A.........        5   06/24/2019  CBI................  (G) Lubricant additive.  (G) Phosphonic acid,
                                                                                          dimethyl ester,
                                                                                          polymer with alkyl
                                                                                          diols.
P-18-0044A.........        3   06/24/2019  CBI................  (G) Intermediate         (G) Fatty acids.
                                                                 species.
P-18-0045A.........        3   06/24/2019  CBI................  (G) Application coating  (G) Fatty acids, alkyl
                                                                                          esters.
P-18-0050..........        1   11/16/2017  CBI................  (G) Raw material in      (G) Alkane,
                                                                 industrial coatings.     diisocyanato-,
                                                                                          homopolymer, alkyl
                                                                                          dihydrogen phosphate-
                                                                                          and polyalkylene
                                                                                          glycol mono-alkyl
                                                                                          ether-.
P-18-0061A.........        3   06/24/2019  CBI................  (G) Industrial coating   (G) Alkyl
                                                                 hardners.                methacrylates, polymer
                                                                                          with alkyl acrylates,
                                                                                          styrene hydroxyalkyl
                                                                                          acrylates, novalac
                                                                                          epoxy and epoxy
                                                                                          modified acrylic salt
                                                                                          with organic amines.
P-18-0078A.........        4   06/26/2019  CBI................  (G) Paint..............  (G) 2-Alkenoic acid, 2-
                                                                                          alkyl-, 2-alkyl ester,
                                                                                          polymer with alkyl 2-
                                                                                          alkenoate, 2-
                                                                                          substitutedalkyl 2-
                                                                                          alkenoate and 2-
                                                                                          substitutedalkyl 2-
                                                                                          alkyl-2-alkenoate,
                                                                                          tert alkylperoxoate
                                                                                          initiated.
P-18-0122A.........        6   06/04/2019  Polymer Ventures,    (G) Paper additive.....  (G) Alkylamide, polymer
                                            Inc.                                          with alkylamine,
                                                                                          formaldehyde, and
                                                                                          polycyanamide, alkyl
                                                                                          acid salt.
P-18-0125A.........        2   06/18/2019  NOLTEX L.L.C.......  (G) Reagent in coating   (G) Oxoalkylcarboxylic
                                                                 material.                acid, sodium salt.
P-18-0197A.........        2   06/21/2019  CBI................  (G) Polymer composite    (G) Metal,
                                                                 additive.                alkylcarboxylate oxo
                                                                                          complexes.
P-18-0207A.........        3   06/21/2019  CBI................  (G) Polymer composite    (G) Metal, oxo
                                                                 additive.                alkylcarboxylate
                                                                                          complexes.
P-18-0239A.........        3   06/26/2019  CBI................  (G) Reactant in coating  (G) N-alkyl
                                                                                          propanamide.
P-18-0240A.........        3   06/26/2019  CBI................  (G) Reactant in coating  (G) N-alkyl acetamide.
P-18-0260A.........        4   06/04/2019  Allnex USA Inc.....  (S) Binder for wood      (G) Fatty acids,
                                                                 stains.                  polymers with alkanoic
                                                                                          acid and substituted
                                                                                          carbomonocycle,
                                                                                          peroxide-initiated,
                                                                                          polymers with alkanoic
                                                                                          acid esters and
                                                                                          substituted
                                                                                          carbomonocycle,
                                                                                          ammonium salts.
P-18-0263A.........        2   06/17/2019  CBI................  (G) Solution additive..  (G) Mixed alkyl esters-
                                                                                          , polymer with N1-(2-
                                                                                          aminoethyl)- l,2-
                                                                                          ethanediamine,
                                                                                          aziridine, N-acetyl
                                                                                          derivs., acetates
                                                                                          (salts).
P-18-0263A.........        3   06/26/2019  CBI................  (G) Solution additive..  (G) Mixed alkyl esters-
                                                                                          , polymer with N1-(2-
                                                                                          aminoethyl)- l,2-
                                                                                          ethanediamine,
                                                                                          aziridine, N-acetyl
                                                                                          derivs., acetates
                                                                                          (salts).
P-18-0274A.........        6   06/19/2019  CBI................  (S) Chemical             (G) Heterocycle
                                                                 Intermediate. (G)        fluoroalkyl sulfonyl.
                                                                 Additive.

[[Page 39838]]

 
P-18-0295..........        1   08/30/2018  CBI................  (S) Use as an            (S) 1,3-Butanediol,
                                                                 ingredient in the        (3R)-.
                                                                 manufacture of
                                                                 consumer cleaning
                                                                 products. In these
                                                                 products, the notified
                                                                 chemical is not
                                                                 destroyed nor further
                                                                 reacted. (S) Use as
                                                                 monomer in the
                                                                 manufacture of resins
                                                                 for use in paint and
                                                                 coating products.
                                                                 Notified substance
                                                                 will not be present in
                                                                 the cured coating. (S)
                                                                 Use as a monomer in
                                                                 the manufacture of
                                                                 plastic products. In
                                                                 this process the
                                                                 notified substance is
                                                                 reacted with one or
                                                                 more other compounds
                                                                 to become part of a
                                                                 polymer. Depending on
                                                                 the reactants
                                                                 involved, the final
                                                                 polymer can be a resin
                                                                 used to make molded
                                                                 plastic products or
                                                                 the final polymer can
                                                                 be a shorter polymer
                                                                 used as a plasticizer.
P-18-0323A.........        3   06/18/2019  Kuraray America,     (G) Raw material for     (S) 2-Propenoic acid, 2-
                                            Inc.                 polymer manufacturing.   methyl-, 3-methyl-3-
                                                                                          buten-1-yl ester.
P-18-0372A.........        4   06/11/2019  Hexion Inc.........  (G) Polyol. (S)          (G) Formaldehyde,
                                                                 Reactive modifier for    polymer with phenol
                                                                 Carbon, Fiber bonding,   and heteroatom-
                                                                 Friction, Coated         substituted
                                                                 abrasives, Glass         heteromonocycle,
                                                                 Inserts, Refractory,     reaction products with
                                                                 and Bonded abrasives.    1,3-dioxolan-2-one and
                                                                 (S) Reactive polyol      4-methyl-1,3-dioxolan-
                                                                 for Sealants,            2-one.
                                                                 Adhesives, 1 part
                                                                 coatings, 2 part
                                                                 coatings, and
                                                                 composites.
P-18-0372A.........        3   05/31/2019  Hexion Inc.........  (G) Polyol. (S)          (G) Formaldehyde,
                                                                 Reactive modifier for    polymer with phenol
                                                                 Carbon, Fiber bonding,   and heteroatom-
                                                                 Friction, Coated         substituted
                                                                 abrasives, Glass         heteromonocycle,
                                                                 Inserts, Refractory,     reaction products with
                                                                 and Bonded abrasives.    1,3-dioxolan-2-one and
                                                                 (S) Reactive polyol      4-methyl-1,3-dioxolan-
                                                                 for Sealants,            2-one.
                                                                 Adhesives, 1 part
                                                                 coatings, 2 part
                                                                 coatings, and
                                                                 composites.
P-18-0373A.........        4   06/11/2019  Hexion Inc.........  (G) Polyol.............  (G) Formaldehyde,
                                                                                          polymer with 2-
                                                                                          methyloxirane,
                                                                                          oxirane, phenol and
                                                                                          heteroatom-substituted
                                                                                          heteromonocycle.
P-18-0373A.........        3   05/31/2019  Hexion Inc.........  (G) Polyol.............  (G) Formaldehyde,
                                                                                          polymer with 2-
                                                                                          methyloxirane,
                                                                                          oxirane, phenol and
                                                                                          heteroatom-substituted
                                                                                          heteromonocycle.
P-19-0021A.........        3   06/26/2019  CBI................  (G) Pigment ink........  (G) Hydroxyalkyl
                                                                                          carboxylic acid,
                                                                                          polymer with
                                                                                          alkylamine, alkylene
                                                                                          carbonate, alkanediol,
                                                                                          isocyanate, compd.
                                                                                          with alkylamine.
P-19-0022A.........        3   06/26/2019  CBI................  (G) Pigment ink........  (G) Hydroxyalkyl
                                                                                          carboxylic acid,
                                                                                          polymer with
                                                                                          alkylamine, alkyl
                                                                                          carbonate, alkanediol,
                                                                                          isocyanate, compd.
                                                                                          with alkylamine.
P-19-0024A.........        4   06/12/2019  Sales and            (S) Hot Mix Asphalt      (S) 1-Octadecanaminium,
                                            Distribution         Application: The PMN     N,N-dimethyl-N-[3-
                                            Services, Inc.       compound will be used    (trimethoxysilyl)propy
                                                                 as asphalt additive      l]-, chloride (1:1),
                                                                 for hot mix (HMA) as     reaction products with
                                                                 well as cold mix (CMA)   water,
                                                                 asphalt applications.    Trimethoxy(propyl)
                                                                 The PMN substance        silane,
                                                                 chemically reacts with   Trimethoxy(methyl)sila
                                                                 the surface of the       ne, Tetraethyl
                                                                 aggregate and changes    orthosilicate and
                                                                 surface                  ethane-1,2-diol.
                                                                 characteristics of
                                                                 aggregate from
                                                                 hydrophilic to
                                                                 hydrophobic. This
                                                                 change provides
                                                                 stronger bonding
                                                                 between asphalt and
                                                                 aggregates and reduces
                                                                 the potential for
                                                                 stripping away asphalt
                                                                 binder from an
                                                                 aggregate due to
                                                                 water. (S)
                                                                 Waterproofing
                                                                 Application: The PMN
                                                                 substance is expected
                                                                 to be used in
                                                                 waterproofing of
                                                                 building materials,
                                                                 including cementitious
                                                                 material, masonry,
                                                                 concrete, plaster,
                                                                 bricks, etc. It is
                                                                 initially intended to
                                                                 be used at a maximum
                                                                 of 5 sites by trained
                                                                 commercial
                                                                 applicators. The PMN
                                                                 substance is
                                                                 modification of a
                                                                 quaternary silane
                                                                 compound by a
                                                                 hydrolysis reaction
                                                                 with other silanes to
                                                                 make it an oligomeric
                                                                 compound. These
                                                                 quaternary silane
                                                                 products have been
                                                                 manufactured and
                                                                 marketed for
                                                                 waterproofing uses for
                                                                 over 35 years. The
                                                                 solution of PMN
                                                                 substance in water is
                                                                 applied as a
                                                                 waterproofing sealer
                                                                 for building materials
                                                                 by spray application.
                                                                 (S) Asphalt Emulsion
                                                                 Application: The PMN
                                                                 substance is water
                                                                 soluble and can be
                                                                 used as an asphalt
                                                                 emulsion in road
                                                                 construction. This
                                                                 additive provides
                                                                 better bonding with
                                                                 ground surface, quick
                                                                 drying and reduced
                                                                 tire pickup of the
                                                                 asphalt emulsion by
                                                                 application equipment.
P-19-0031A.........        8   06/19/2019  CBI................  (S) Curing agent for     (G) Phenol, 4,4'-(1-
                                                                 epoxy coating systems.   methylethylidene)bis-,
                                                                                          polymer with
                                                                                          formaldehyde, 2-
                                                                                          (chloromethyl)oxirane,
                                                                                          alpha-hydro-omega-
                                                                                          hydroxypoly(oxy-1,2-
                                                                                          ethanediyl), and
                                                                                          polyamines.

[[Page 39839]]

 
P-19-0051A.........        5   06/21/2019  CBI................  (G) UV curable inks....  (G) 1,3-Propanediamine,
                                                                                          N1,N1-dimethyl-,
                                                                                          polymers with alkylene
                                                                                          glycol ether with
                                                                                          alkyltriol (3:1) mixed
                                                                                          acrylates and
                                                                                          adipates, and alkylene
                                                                                          glycol monoacrylate
                                                                                          ether with alkyltriol
                                                                                          (3:1).
P-19-0053A.........        5   06/25/2019  Wacker Chemical      (S) Used as a surface    (S) 1-Butanamine, N-
                                            Corporation.         treatment, sealant,      butyl-N-
                                                                 caulk, and coating for   [(triethoxysilyl)methy
                                                                 mineral building         l]-.
                                                                 materials such as
                                                                 concrete, brick,
                                                                 limestone, and
                                                                 plaster, as well as on
                                                                 wood, metal and other
                                                                 substrates.
                                                                 Formulations
                                                                 containing the cross-
                                                                 linker provide release
                                                                 and anti-graffiti
                                                                 properties, water
                                                                 repellency, weather
                                                                 proofing, and improved
                                                                 bonding in adhesive/
                                                                 sealant applications.
                                                                 The new substance is a
                                                                 moisture curing cross-
                                                                 linking agent which
                                                                 binds/joins polymers
                                                                 together when cured.
                                                                 Ethanol is released
                                                                 during cure, and once
                                                                 the cure reaction is
                                                                 complete, the product
                                                                 will remain bound in
                                                                 the cured polymer
                                                                 matrix.
P-19-0071A.........        3   06/11/2019  CBI................  (G) Physical property    (G) Trimethylolpropane,
                                                                 modifier for polymers.   alkenoic acid,
                                                                                          triester.
P-19-0075A.........        3   05/30/2019  Allnex USA Inc.....  (S) The PMN substance    (G) Alkenoic acid,
                                                                 is an intermediate       alkyl-,
                                                                 incorporated as a        (alkylamino)alkyl
                                                                 component in VIACRYL     ester, polymer with
                                                                 SC 6841.                 alkyl substituted
                                                                                          carbomonocycle,
                                                                                          substituted-
                                                                                          [alkanenitrile]-
                                                                                          initiated, formates.
P-19-0082A.........        3   06/20/2019  Bedoukian Research   (S) Fragrance uses per   (S) Heptanal, 6-hydroxy-
                                            Inc.                 FFDCA: fine fragrance,   2,6-dimethyl-.
                                                                 creams, lotions, etc.,
                                                                 Fragrance uses per
                                                                 TSCA: scented papers,
                                                                 candles, detergents,
                                                                 cleaners, etc.
P-19-0086A.........        3   05/31/2019  CBI................  (G) Monitor oil and gas  (G) Halogenated sodium
                                                                 well performance.        alkylbenzoate.
P-19-0087A.........        3   05/31/2019  CBI................  (G) Monitor oil and gas  (G) Halogenated sodium
                                                                 well performance.        alkylbenzoate.
P-19-0089A.........        5   06/04/2019  CBI................  (G) Well performance     (G) Halogenated sodium
                                                                 tracer.                  alkylbenzoate.
P-19-0090A.........        3   06/04/2019  CBI................  (G) Well performance     (G) Halogenated sodium
                                                                 tracer.                  benzoate.
P-19-0091A.........        3   06/04/2019  CBI................  (G) Well performance     (G) Halogenated
                                                                 tracer.                  alkylbenzoic acid.
P-19-0092A.........        2   06/04/2019  CBI................  (G) Tracer of well       (G) Halogenated
                                                                 performance.             alkylbenzoic acid.
P-19-0093A.........        3   06/04/2019  CBI................  (G) Tracer for well      (G) Halogenated benzoic
                                                                 performance.             acid.
P-19-0095..........        3   06/04/2019  CBI................  (G) Consumer             (G) Poly hydroxy
                                                                 Disposables, Polymer     alkanoate.
                                                                 Sheet, and Durable
                                                                 Goods.
P-19-0096..........        1   05/31/2019  CBI................  (G) Additive for         (G) Benzofuranone,
                                                                 plastics industry.       bis(branched alkyl)-
                                                                                          [dialkyl[tetrakis(bran
                                                                                          ched alkyl)-alkyl-
                                                                                          dibenzo-substituted
                                                                                          phosphite-yl] phenyl]-
                                                                                          .
P-19-0097..........        3   06/10/2019  CBI................  (G) Well performance     (G) Halogenated
                                                                 monitor.                 alkylbenzoic acid,
                                                                                          ethyl ester.
P-19-0098..........        1   06/04/2019  Clariant             (S) Flame retardant      (G) Phosphoric acid,
                                            Corporation.         additive for             polymer with
                                                                 intumescent coatings.    (hydroxyalkyl)-
                                                                                          alkanediol and
                                                                                          alkanediol.
P-19-0100..........        5   06/14/2019  CBI................  (G) Well performance     (G) Halogenated
                                                                 monitor.                 alkylbenzoic acid,
                                                                                          ethyl ester.
P-19-0101..........        4   06/14/2019  CBI................  (G) Monitor well         (G) Halogenated
                                                                 performance.             alkylbenzoic acid,
                                                                                          ethyl ester.
P-19-0102..........        3   06/14/2019  CBI................  (G) Well performance     (G) Halogenated
                                                                 monitor.                 alkylbenzoic acid,
                                                                                          ethyl ester.
P-19-0103..........        2   06/14/2019  CBI................  (G) Well performance     (G) Halogenated alkyl
                                                                 monitor.                 benzoic acid.
P-19-0104..........        4   06/14/2019  CBI................  (G) Well performance     (G) Halogenated
                                                                 monitor.                 alkylbenzoic acid,
                                                                                          ethyl ester.
P-19-0105..........        3   06/14/2019  CBI................  (G) Well performance     (G) Halogenated benzoic
                                                                 monitor.                 acid, ethyl ester.
P-19-0106..........        3   06/14/2019  CBI................  (G) Well performance     (G) Halogenated
                                                                 monitor.                 alkylbenzoic acid,
                                                                                          ethyl ester.
P-19-0107..........        3   06/14/2019  CBI................  (G) Well performance     (G) Halogenated
                                                                 monitor.                 alkylbenzoic acid,
                                                                                          ethyl ester.
P-19-0108..........        3   06/14/2019  CBI................  (G) Well performance     (G) Halogenated
                                                                 monitor.                 alkylbenzoic acid,
                                                                                          ethyl ester.
P-19-0109..........        1   06/07/2019  Arch Chemicals, Inc  (S) Chemical is used as  (S) Copper ethanolamine
                                                                 a component of a hoof    complex, mixed.
                                                                 cleaning formulation
                                                                 to improve the
                                                                 wettability of the
                                                                 overall cleaning
                                                                 solution on the hoof.
P-19-0110..........        3   06/14/2019  CBI................  (G) Well performance     (G) Halogenated benzoic
                                                                 monitor.                 acid, ethyl ester.
P-19-0112..........        1   06/12/2019  Shin-ETSU Microsi..  (G) Contained use for    (G) Substituted
                                                                 microlithography for     heterocyclic onium
                                                                 electronic device        compound, salt with 1-
                                                                 manufacturing.           (difluorosulfomethyl)-
                                                                                          2,2,2-trifluoroethyl 3-
                                                                                          [(2-methyl-1-oxo-2-
                                                                                          propen-1-
                                                                                          yl)oxy]tricyclo[3.3.1.
                                                                                          13,7]decane-1-
                                                                                          carboxylate (1:1),
                                                                                          polymer with 3-
                                                                                          etheylphenol, 1-(1-
                                                                                          methylethyl)cyclopenty
                                                                                          l 2-methyl-2-
                                                                                          propenoate and 1-(7-
                                                                                          oxabicyclo[2.2.1]hept-
                                                                                          2-yl)cyclopentyl 2-
                                                                                          methyl-2-propenoate,
                                                                                          di-Me 2,2'-(1,2-
                                                                                          diazenediyl)bis[2-
                                                                                          methylpropenoate]-
                                                                                          initiated.
P-19-0113..........        2   06/13/2019  CBI................  (G) Flow cell additive.  (G) Metal oxide-chloro.
P-19-0114..........        1   06/17/2019  Shin-ETSU Microsi..  (G) Contained use for    (G) Sulfonium,
                                                                 microlithography for     triphenyl-, trifluoro-
                                                                 electronic device        hydroxy-
                                                                 manufacturing.           (triheterosubstituteda
                                                                                          lkyl)alkanoate (1:1).
P-19-0115..........        1   06/17/2019  Tokyo Ohka Kogyo     (G) An ingredient used   (G) Sulfonium,
                                            America, Inc.        in the manufacture of    bis(dihalocarbomonocyc
                                                                 photoresist.             le) carbomonocycle,
                                                                                          substituted
                                                                                          carbomonocyclic ester.
P-19-0117..........        2   06/21/2019  CBI................  (G) Additive...........  (G) Polycyclic amine,
                                                                                          reaction products with
                                                                                          polyalkylalkene,
                                                                                          polymers.
P-19-0118..........        1   06/21/2019  CBI................  (G) Component of         (G) Substituted
                                                                 lubricant.               polyalkylenepoly,
                                                                                          reaction products with
                                                                                          alkene polymer.

[[Page 39840]]

 
P-19-0119..........        1   06/24/2019  Zschimmer & Schwarz  (S) Foaming additive     (S) Poly(oxy-1,2-
                                                                 used in building/        ethanediyl), alpha-
                                                                 construction, exposure   sulfo-omega-hydroxy-,
                                                                 would only occur         C9-11-branched alkyl
                                                                 during loading of        ethers, sodium salts.
                                                                 finished product.
                                                                 Product application is
                                                                 used in a closed
                                                                 system with very low
                                                                 possibility for
                                                                 exposure. To be used
                                                                 on construction sites.
P-19-0120..........        1   06/25/2019  CBI................  (G) Component of ink...  (G) Alkenoic acid,
                                                                                          polymer with
                                                                                          alkanediyl bis
                                                                                          substituted alkylene
                                                                                          bis heteromonocycle,
                                                                                          substituted
                                                                                          carbomonocycle and
                                                                                          (alkylalkenyl)
                                                                                          carbomonocycle, alkali
                                                                                          metal salt.
----------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required
  information and documents have been provided with the submission prior to the start of the 90 day review
  period, and in no way reflects the final status of a complete submission review.

    In Table II of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the NOCs 
that have passed an initial screening by EPA during this period: The 
EPA case number assigned to the NOC including whether the submission 
was an initial or amended submission, the date the NOC was received by 
EPA, the date of commencement provided by the submitter in the NOC, a 
notation of the type of amendment (e.g., amendment to generic name, 
specific name, technical contact information, etc.) and chemical 
substance identity.

                             Table II--NOCs Approved * From 06/01/2019 to 06/30/2019
----------------------------------------------------------------------------------------------------------------
                                                              If amendment,
          Case No.            Received date   Commencement       type of              Chemical substance
                                                  date          amendment
----------------------------------------------------------------------------------------------------------------
J-18-0002..................       6/28/2019       6/19/2018               N   (G) Biofuel producing
                                                                               Saccharomyces cerevisiae
                                                                               modified, genetically stable.
J-18-0003..................       6/28/2019       6/24/2018               N   (G) Biofuel producing
                                                                               Saccharomyces cerevisiae
                                                                               modified, genetically stable.
J-19-0011..................        6/3/2019        6/2/2019               N   (G) Genetically modified
                                                                               microorganism.
P-01-0767..................       6/10/2019       5/10/2019               N   (S) 2-Propenoic acid, 2-methyl-,
                                                                               polymer with butyl 2-propenoate,
                                                                               2-hydroxyethyl 2-methyl-2-
                                                                               propenoate, N- (hydroxymethyl)-2-
                                                                               propenamide, 2-methyl-2-
                                                                               propenamide and 2-propenenitrile,
                                                                               ammonium salt.
P-11-0080..................        6/7/2019       5/22/2019               N   (G) Polyether, .alpha.-hydro-
                                                                               .omega.-hydroxy-, polymer with
                                                                               .alpha.-hydro-.omega.-
                                                                               hydroxypoly[oxy(methyl-1,2-
                                                                               ethanediyl)] ether with
                                                                               alkanepolyol, and 1,1'-
                                                                               methylenebis[4-
                                                                               isocyanatocyclohexane],
                                                                               hydroxyalkyl acrylates-blocked.
P-14-0742..................       6/13/2019       6/11/2019               N   (S) Isocyanic acid,
                                                                               polymethylenepolyphenylene ester,
                                                                               polymer with 1,2-propanediol, 2-
                                                                               (2-butoxyethoxy)ethanol- and n,n-
                                                                               dibutyl-2-hydroxyacetamide-
                                                                               blocked.
P-16-0375..................       6/10/2019       5/26/2019               N   (G) Alkyl methacrylates, polymer
                                                                               with olefines.
P-16-0400..................       6/18/2019        6/3/2019               N   (S) Alkanes, C11-16, branched and
                                                                               linear.
P-16-0532A.................       6/20/2019       4/17/2019               Y   (G) Oxo heteromonocycle.
P-17-0152..................       6/28/2019        6/4/2019               N   (G) Poly(alkyl-oxo-2-propen-1-
                                                                               yl)ester with alkaneaminium
                                                                               trialkyl chloride and alkoxy-
                                                                               poly(oxy-alkanediyl).
P-17-0152..................       6/28/2019        6/4/2019               N   (G) Alkylaminium-trialkyl-2-[(2-
                                                                               methyl-1-oxo-2-propen-1-yl)oxy]-,
                                                                               halide (1:1), polymer with alpha-
                                                                               (2-methyl-1-oxo-2-propen-1-yl)-
                                                                               omega-alkoxypoly(oxy-1,2-
                                                                               alkanediyl).
P-17-0253..................       6/10/2019        6/7/2019               N   (G) Oxirane, 2-methyl-, polymer
                                                                               with oxirane, methyl 2-
                                                                               (substituted carbomonocycle
                                                                               isoquinolin-2(3H)-yl) propyl
                                                                               ether.
P-18-0044A.................       6/13/2019       6/13/2018               Y   (G) Fatty acids.
P-18-0068A.................       6/28/2019      12/21/2018               Y   (G) Metal, alkylcarboxylate oxo
                                                                               complexes.
P-18-0137..................       6/24/2019       6/14/2019               N   (G) Alkylsilsesquioxane, ethoxy-
                                                                               terminated.
P-18-0186..................       5/30/2019       5/14/2019               N   (G) Polyolefin ester.
P-18-0261A.................       6/28/2019       12/5/2018               Y   (G) Metal, alkylcarboxylate oxo
                                                                               complexes.
P-18-0379A.................        6/3/2019        4/9/2019               Y   (G) Cashew, nutshell liq., polymer
                                                                               with bisphenol A,
                                                                               epichlorohydrin, amines,
                                                                               formaldehyde and glycol.
----------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required
  information and documents have been provided with the submission.

    In Table III of this unit, EPA provides the following information 
(to the extent such information is not subject to a CBI claim) on the 
test information that has been received during this time period: The 
EPA case number assigned to the test information; the date the test 
information was received by EPA, the type of test information 
submitted, and chemical substance identity.

[[Page 39841]]



   Table III--Test Information Received From 06/01/2019 to 06/30/2019
------------------------------------------------------------------------
                                        Type of test        Chemical
      Case No.         Received date     information        substance
------------------------------------------------------------------------
P-16-0150...........       6/10/2019  A 2-Week          (G)
                                       Toxicity Study    Chlorofluorocar
                                       of [claimed       bon.
                                       CBI] by Whole-
                                       Body Inhalation
                                       in CD-1 Mice
                                       (OECD 412); and
                                       A 2-Week
                                       Toxicity Study
                                       of [claimed
                                       CBI] by Whole-
                                       Body Inhalation
                                       in Rats (OECD
                                       412).
P-16-0543...........       6/21/2019  Exposure          (G)
                                       Monitoring        Halogenophospho
                                       Report.           ric acid metal
                                                         salt.
P-17-0339-0342......       6/26/2019  Supplemental      (S) Poly(oxy-1,2-
                                       Phase             ethanediyl), a-
                                       Transition.       (2-butyloctyl)-
                                                         w-hydroxy-.
P-18-0141...........        6/5/2019  Acute Inhalation  (G) Ethyl
                                       Toxicity with     modified
                                       Substance 2 in    lactam.
                                       the Rat (Nose
                                       Only) (Acute
                                       Toxic Class
                                       Method).
P-18-0263...........       6/27/2019  GPC Report......  (G) Mixed alkyl
                                                         esters-,
                                                         polymer with N1-
                                                         (2-aminoethyl)-
                                                         l,2-
                                                         ethanediamine,
                                                         aziridine, N-
                                                         acetyl derivs.,
                                                         acetates
                                                         (salts),
P-18-0352...........       6/17/2019  Growth            (G)
                                       Inhibition of     Poly(hetero(alk
                                       [claimed CBI]     yl-1,2-
                                       for Green Algae   alkenyl)],
                                       (Raphidocelis     alpha-[[[3-(1-
                                       subcapitata)      heteromonocycle
                                       (OECD 201),       )alkyl)substitu
                                       Static Acute      ted
                                       Toxicity of       heteroatom]hete
                                       [claimed CBI]     roatom-
                                       to Daphnia        substituted
                                       Magna (OECD       alkyl]]-omega-
                                       202),             [[[[3-(1-
                                       Determination     heteromonocycle
                                       of the Ready      )alkyl]]substit
                                       Biodegradabilit   uted
                                       y of [claimed     heteroatom]
                                       CBI] (OECD        heteroatom-
                                       301D).            substituted
                                                         alkyl]]heteroat
                                                         om]-.
P-19-0073...........       6/13/2019  Acute Toxicity    (G)
                                       to Fish (OECD     Propoxylated,
                                       203), Local       ethoxylated
                                       Lymph Node        alkoxyalkyl
                                       Assay in Mice     ether.
                                       (OECD 442B).
------------------------------------------------------------------------

    If you are interested in information that is not included in these 
tables, you may contact EPA's technical information contact or general 
information contact as described under FOR FURTHER INFORMATION CONTACT 
to access additional non-CBI information that may be available.

    Authority:  15 U.S.C. 2601 et seq.

    Dated: July 30, 2019.
Pamela Myrick,
Director, Information Management Division, Office of Pollution 
Prevention and Toxics.
[FR Doc. 2019-17149 Filed 8-9-19; 8:45 am]
 BILLING CODE 6560-50-P


