[Federal Register Volume 84, Number 89 (Wednesday, May 8, 2019)]
[Notices]
[Pages 20122-20128]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-09378]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OPPT-2019-0075; FRL-9991-68]


Certain New Chemicals; Receipt and Status Information for 
February 2019

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA), 
as amended by the Frank R. Lautenberg Chemical Safety for the 21st 
Century Act, to make information publicly available and to publish 
information in the Federal Register pertaining to submissions under 
TSCA Section 5, including notice of receipt of a Premanufacture notice 
(PMN), Significant New Use Notice (SNUN) or Microbial Commercial 
Activity Notice (MCAN), including an amended notice or test 
information; an exemption application (Biotech exemption); an 
application for a test marketing exemption (TME), both pending and/or 
concluded; a notice of commencement (NOC) of manufacture (including 
import) for new chemical substances; and a periodic status report on 
new chemical substances that are currently under EPA review or have 
recently concluded review. This document covers the period from 02/01/
2019 to 02/28/2019.

DATES: Comments identified by the specific case number provided in this 
document must be received on or before June 7, 2019.

ADDRESSES: Submit your comments, identified by docket identification 
(ID) number EPA-HQ-OPPT-2019-0075, and the specific case number for the 
chemical substance related to your comment, by one of the following 
methods:
     Federal eRulemaking Portal: http://www.regulations.gov. 
Follow the online instructions for submitting comments. Do not submit 
electronically any information you consider to be Confidential Business 
Information (CBI) or other information whose disclosure is restricted 
by statute.
     Mail: Document Control Office (7407M), Office of Pollution 
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 
Pennsylvania Ave. NW, Washington, DC 20460-0001.
     Hand Delivery: To make special arrangements for hand 
delivery or delivery of boxed information, please follow the 
instructions at http://www.epa.gov/dockets/contacts.html.
    Additional instructions on commenting or visiting the docket, along 
with more information about dockets generally, is available at http://www.epa.gov/dockets.

FOR FURTHER INFORMATION CONTACT: 
    For technical information contact: Jim Rahai, Information 
Management Division (7407M), Office of Pollution Prevention and Toxics, 
Environmental Protection Agency, 1200 Pennsylvania Ave. NW, Washington, 
DC 20460-0001; telephone number: (202) 564-8593; email address: 
rahai.jim@epa.gov.
    For general information contact: The TSCA-Hotline, ABVI-Goodwill, 
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 
554-1404; email address: TSCA-Hotline@epa.gov.

SUPPLEMENTARY INFORMATION: 

I. Executive Summary

What action is the Agency taking?

    This document provides the receipt and status reports for the 
period from 02/01/2019 to 02/28/2019. The Agency is providing notice of 
receipt of PMNs, SNUNs and MCANs (including amended notices and test 
information); an exemption application under 40 CFR part 725 (Biotech 
exemption); TMEs, both pending and/or concluded; NOCs to manufacture a 
new chemical substance; and a periodic status report on new chemical 
substances that are currently under EPA review or have recently 
concluded review.
    EPA is also providing information on its website about cases 
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN 
and exemption notices received, the date of receipt, the final EPA 
determination on the notice, and the effective date of EPA's 
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a 
weekly basis.

B. What is the Agency's authority for taking this action?

    Under the TSCA, 15 U.S.C. 2601 et seq., a chemical substance may be 
either an ``existing'' chemical substance or a ``new'' chemical 
substance. Any chemical substance that is not on EPA's TSCA Inventory 
of Chemical Substances (TSCA Inventory) is classified as a ``new 
chemical substance,'' while a chemical substance that is listed on the 
TSCA Inventory is classified as an ``existing chemical substance.'' 
(See TSCA section 3(11).) For more information about the TSCA Inventory 
go to: https://www.epa.gov/tsca-inventory.
    Any person who intends to manufacture (including import) a new 
chemical substance for a non-exempt commercial purpose, or to 
manufacture or process a chemical substance in a non-exempt manner for 
a use that EPA has determined is a significant new use, is required by 
TSCA section 5 to provide EPA with a PMN, MCAN or SNUN, as appropriate, 
before initiating the activity. EPA will review the notice, make a risk 
determination on the chemical substance or significant new use, and 
take appropriate action as described in TSCA section 5(a)(3).
    TSCA section 5(h)(1) authorizes EPA to allow persons, upon 
application and under appropriate restrictions, to manufacture or 
process a new chemical substance, or a chemical substance subject to a 
significant new use rule (SNUR) issued under TSCA section 5(a)(2), for 
``test marketing'' purposes, upon a showing that the manufacture, 
processing, distribution in commerce, use, and disposal of the chemical 
will not present an unreasonable risk of injury to health or the 
environment. This is referred to as a test marketing

[[Page 20123]]

exemption, or TME. For more information about the requirements 
applicable to a new chemical go to: http://www.epa.gov/oppt/newchems.
    Under TSCA sections 5 and 8 and EPA regulations, EPA is required to 
publish in the Federal Register certain information, including notice 
of receipt of a PMN/SNUN/MCAN (including amended notices and test 
information); an exemption application under 40 CFR part 725 (biotech 
exemption); an application for a TME, both pending and concluded; NOCs 
to manufacture a new chemical substance; and a periodic status report 
on the new chemical substances that are currently under EPA review or 
have recently concluded review.

C. Does this action apply to me?

    This action provides information that is directed to the public in 
general.

D. Does this action have any incremental economic impacts or paperwork 
burdens?

    No.

E. What should I consider as I prepare my comments for EPA?

    1. Submitting confidential business information (CBI). Do not 
submit this information to EPA through regulations.gov or email. 
Clearly mark the part or all of the information that you claim to be 
CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark 
the outside of the disk or CD-ROM as CBI and then identify 
electronically within the disk or CD-ROM the specific information that 
is claimed as CBI. In addition to one complete version of the comment 
that includes information claimed as CBI, a copy of the comment that 
does not contain the information claimed as CBI must be submitted for 
inclusion in the public docket. Information so marked will not be 
disclosed except in accordance with procedures set forth in 40 CFR part 
2.
    2. Tips for preparing your comments. When preparing and submitting 
your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html.

II. Status Reports

    In the past, EPA has published individual notices reflecting the 
status of TSCA section 5 filings received, pending or concluded. In 
1995, the Agency modified its approach and streamlined the information 
published in the Federal Register after providing notice of such 
changes to the public and an opportunity to comment (See the Federal 
Register of May 12, 1995 (60 FR 25798) (FRL-4942-7). Since the passage 
of the Lautenberg amendments to TSCA in 2016, public interest in 
information on the status of section 5 cases under EPA review and, in 
particular, the final determination of such cases, has increased. In an 
effort to be responsive to the regulated community, the users of this 
information, and the general public, to comply with the requirements of 
TSCA, to conserve EPA resources and to streamline the process and make 
it more timely, EPA is providing information on its website about cases 
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN 
and exemption notices received, the date of receipt, the final EPA 
determination on the notice, and the effective date of EPA's 
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a 
weekly basis.

III. Receipt Reports

    For the PMN/SNUN/MCANs that have passed an initial screening by EPA 
during this period, Table I provides the following information (to the 
extent that such information is not subject to a CBI claim) on the 
notices screened by EPA during this period: The EPA case number 
assigned to the notice that indicates whether the submission is an 
initial submission, or an amendment, a notation of which version was 
received, the date the notice was received by EPA, the submitting 
manufacturer (i.e., domestic producer or importer), the potential uses 
identified by the manufacturer in the notice, and the chemical 
substance identity.
    As used in each of the tables in this unit, (S) indicates that the 
information in the table is the specific information provided by the 
submitter, and (G) indicates that this information in the table is 
generic information because the specific information provided by the 
submitter was claimed as CBI. Submissions which are initial submissions 
will not have a letter following the case number. Submissions which are 
amendments to previous submissions will have a case number followed by 
the letter ``A'' (e.g., P-18-1234A). The version column designates 
submissions in sequence as ``1'', ``2'', ``3'', etc. Note that in some 
cases, an initial submission is not numbered as version 1; this is 
because earlier version(s) were rejected as incomplete or invalid 
submissions. Note also that future versions of the following tables may 
adjust slightly as the Agency works to automate population of the data 
in the tables.

                        Table I--PMN/SNUN/MCANs Approved * From 02/01/2019 to 02/28/2019
----------------------------------------------------------------------------------------------------------------
                                    Received
      Case No.         Version        date        Manufacturer              Use             Chemical substance
----------------------------------------------------------------------------------------------------------------
J-19-0017..........            1     2/1/2019  Danisco US, Inc..  (G) Production of a     (G) Genetically
                                                                   chemical substance.     modified
                                                                                           microorganism for the
                                                                                           production of a
                                                                                           chemical substance.
P-16-0541A.........            4    1/21/2019  Specialty          (S) Adhesive for wood   (S) Soybean meal,
                                                Organics, Inc.     particle/chip/          reaction products
                                                                   fiberboard.             with phosphoric
                                                                                           trichloride.
P-16-0584A.........            5   12/17/2018  CBI..............  (G) Additive used to    (G) Multi-walled
                                                                   impart specific         carbon nanotubes.
                                                                   physicochemical
                                                                   property(ies) to
                                                                   finished articles.
P-16-0585A.........            5   12/17/2018  CBI..............  (G) Additive used to    (G) Multi-walled
                                                                   impart specific         carbon nanotubes.
                                                                   physicochemical
                                                                   property(ies) to
                                                                   finished articles.
P-16-0586A.........            5   12/17/2018  CBI..............  (G) Additive used to    (G) Multi-walled
                                                                   impart specific         carbon nanotubes.
                                                                   physicochemical
                                                                   property(ies) to
                                                                   finished articles.

[[Page 20124]]

 
P-17-0322A.........            6   12/18/2018  CBI..............  (G) Auxiliary drier,    (G) Zinc naphthenate
                                                                   has little drying       complexes.
                                                                   action in itself but
                                                                   is very useful in
                                                                   combination with
                                                                   active driers. In
                                                                   vehicles that show
                                                                   poor tolerance for
                                                                   lead, calcium can
                                                                   replace part of the
                                                                   lead with a larger
                                                                   amount of calcium to
                                                                   prevent the
                                                                   precipitation of the
                                                                   lead & maintain
                                                                   drying efficiency.
                                                                   Calcium is also
                                                                   useful as pigment
                                                                   wetting & dispersing
                                                                   agents & help to
                                                                   improve hardness &
                                                                   gloss & reduce
                                                                   ``Silkins.'' When
                                                                   ground with drier
                                                                   adsorbing pigments,
                                                                   calcium minimizes
                                                                   loss of dry by being
                                                                   preferentially
                                                                   absorbed.
P-18-0007A.........            2   12/17/2018  Nexoleum USA Corp  (S) Used as a           (S) Glycerides, soya
                                                                   plasticizer/            mono- and di-,
                                                                   stabilizer for          epoxidized, acetates.
                                                                   flexible PVC.
P-18-0008A.........            2   12/17/2018  Nexoleum USA Corp  (S) Used as a           (S) Glycerides, C16-18
                                                                   plasticizer/            and C18-unsatd. mono-
                                                                   stabilizer for          and di-, epoxidized,
                                                                   flexible PVC.           acetates.
P-18-0012A.........            3   12/17/2018  CBI..............  (G) Adhesives.........  (G) Polyester polyol.
P-18-0020A.........            4     2/1/2019  Myriant            (G) Industrial coating  (S) Butanediolic acid,
                                                Corporation.                               polyol with 2-ethyl-2-
                                                                                           (hydroxymethyl)-1,3-
                                                                                           propanediol, 2,5-
                                                                                           Furandione and 1,3-
                                                                                           propanediol,
                                                                                           3a,4,5,6,7,7a-
                                                                                           hexahydro-4,7-methano-
                                                                                           1H-inden-5(or 6)-yl
                                                                                           ester.
P-18-0060A.........            4     1/8/2019  Eastman Chemical   (S) Surfactant for      (S) 1-Butanaminium, 4-
                                                Company, Inc.      Liquid Dish; (S)        amino-N-(2-hydroxy-3-
                                                                   Surfactant for Liquid   sulfopropyl)-N, N-
                                                                   Laundry; (S)            dimethyl-4-oxo-, N-
                                                                   Surfactant for          coco alkyl derivs.,
                                                                   Industrial Hand Wash;   inner salts.
                                                                   (S) FDA related uses;
                                                                   (S) Export only
                                                                   volume of the TSCA
                                                                   manufactured NCS.
P-18-0070A.........            9   12/18/2018  ArrowStar, LLC...  (G) Chemical            (G) Waste plastics,
                                                                   intermediate for        polyester, depolymd.
                                                                   polyurethane industry.  with glycols,
                                                                                           polymers with
                                                                                           dicarboxylic acids.
P-18-0073A.........            5   12/19/2018  Earth Science      (G) Non-Pesticide       (S) Sulfuric acid,
                                                Laboratories.      Agricultural Use        ammonium salt (1:?).
                                                                   Chemical; (S) FIFRA
                                                                   Inert ingredient; (S)
                                                                   Anti-scalant; (S)
                                                                   Chlorine stabilizer.
P-18-0107A.........            2   12/13/2018  Lanxess            (S) Hydrolysis          (G) Alcohol capped
                                                Corporation.       stabilizer.             polycarbodiimide from
                                                                                           diethyldiisocyanatobe
                                                                                           nzene.
P-18-0162A.........            5   12/27/2018  CBI..............  (G) Adhesive component  (G) Cashew nutshell
                                                                                           liquid, polymer with
                                                                                           diisocyanatoalkane,
                                                                                           substituted-
                                                                                           polyoxyalkyldiol and
                                                                                           polyether polyol.
P-18-0176A.........            3     2/6/2019  CBI..............  (G) Industrial coating  (G) 5-
                                                                                           Isobenzofurancarboxyl
                                                                                           ic acid, 1,3-dihydro-
                                                                                           1,3-dioxo-, polymer
                                                                                           with aminoalcohol,
                                                                                           2,2-dimethyl-1,3-
                                                                                           propanediol, 2,5-
                                                                                           furandione,
                                                                                           polyalkylene glycol
                                                                                           and unsaturated
                                                                                           anhydride.
P-18-0257A.........            2    1/29/2019  Everris NA, Inc..  (S) Inorganic           (S) Phosphoric acid,
                                                                   Fertilizer.             potassium salt (2:3).
P-18-0303A.........            3    1/10/2019  CBI..............  (G) UV curable          (G) 2-Propenoic acid,
                                                                   oligomer.               polymer with
                                                                                           aliphatic cyclic
                                                                                           epoxide.
P-18-0313A.........            3    1/25/2019  Ashland, Inc.....  (G) Adhesive..........  (G) Alkoxylated glycol
                                                                                           ether with 1,2-
                                                                                           propanediol, reaction
                                                                                           products with alkyl
                                                                                           alcohol blocked 1,1'-
                                                                                           methylenebis [4-
                                                                                           isocyanatobenzene]
                                                                                           homopolymer and 1,1'-
                                                                                           methylenebis [4-
                                                                                           isocyanatobenzene].
P-18-0321A.........            3     2/1/2019  CBI..............  (G) Intermediate for    (G) Poly(oxy-
                                                                   use in chemical         ethanediyl), (methyl
                                                                   manufacture.            ethanediyl)bis[hydrox
                                                                                           y-.
P-18-0324A.........            4   12/19/2018  CBI..............  (S) Resin/binder in     (G) Organic acid
                                                                   paint formulations      dimethyl ester,
                                                                   for industrial and      polymer with mixed
                                                                   architectural           alkanediols and 5-
                                                                   applications.           isocyanato-1-
                                                                                           (isocyanatomethyl)-
                                                                                           1,3,3-
                                                                                           trimethylcyclohexane,
                                                                                           trimethoxysilylalkyla
                                                                                           lkanamine-blocked.
P-18-0326..........            2    2/20/2019  CBI..............  (G) Chemical            (G) Alkanoic acid,
                                                                   Intermediate.           alkyl ester, manuf.
                                                                                           of, byproducts from,
                                                                                           distn. residues.
P-18-0361A.........            3   12/13/2018  Lanxess,           (S) Electrophoretic     (S) Propanoic acid, 3-
                                                Solutions US Inc.  paint.                  hydroxy-2-
                                                                                           (hydroxymethyl)-2-
                                                                                           methyl-, polymer with
                                                                                           1,3,5-tris(6-
                                                                                           isocyanatohexyl)-
                                                                                           1,3,5-triazine-
                                                                                           2,4,6(1H,3H,5H)-
                                                                                           trione, 3,5-dimethyl-
                                                                                           1H-pyrazole-blocked.
P-18-0363A.........            2   12/12/2018  CBI..............  (G) Adhesive..........  (G) Phenol, polymer
                                                                                           with formaldehyde,
                                                                                           substituted phenol,
                                                                                           sodium salts.
P-18-0365A.........            4     1/9/2019  CBI..............  (G) Superabsorbent      (G) Starch,
                                                                   polymer; (S)            carboxymethyl ether,
                                                                   Manufacture for         sodium salt, polymer
                                                                   export only.            with polycarboxylic
                                                                                           acid.
P-18-0366A.........            4     1/9/2019  CBI..............  (G) Superabsorbent      (G) Starch,
                                                                   polymer; (S)            carboxymethyl ether,
                                                                   Manufacture for         sodium salt, polymer
                                                                   export only.            with mixed
                                                                                           polycarboxylic acids.
P-18-0384A.........            2   12/23/2018  Sigma-Aldrich      (S) Starting material   (S) Lithium 6.
                                                Co., LLC.          for manufacture of 6
                                                                   Lithium chloride
                                                                   scintillation
                                                                   crystals for use in
                                                                   radiation detection.
P-18-0399A.........            4    1/14/2019  CBI..............  (G) Open, non-          (G) Rosin adduct
                                                                   dispersive use          ester, polymer with
                                                                   additive for            polyols, compd. with
                                                                   industrial use only.    ethanolamine.
P-18-0400A.........            4    1/14/2019  CBI..............  (G) Open, non-          (G) Rosin adduct
                                                                   dispersive use,         ester, polymer with
                                                                   additive for textile    polyols, potassium
                                                                   industry.               salt.

[[Page 20125]]

 
P-18-0406A.........            2   12/13/2018  CBI..............  (G) Initiator.........  (G) Formaldehyde,
                                                                                           polymer with alkyl
                                                                                           aryl ketones.
P-19-0002A.........            4   12/19/2018  CBI..............  (S) Chemical            (G) Polyaromatic
                                                                   Intermediate.           symmetrical
                                                                                           tetracarboxylic acid.
P-19-0003A.........            3   12/19/2018  CBI..............  (S) Chemical            (G) Polyaromatic ether
                                                                   Intermediate.           symmetrical
                                                                                           dicarboxylic
                                                                                           anhydride.
P-19-0004A.........            3   12/19/2018  CBI..............  (G) Molded parts and    (G) Aromatic
                                                                   components.             dianhydride, polymer
                                                                                           with aromatic diamine
                                                                                           and heteroatom
                                                                                           bridged aromatic
                                                                                           diamine, reaction
                                                                                           products with
                                                                                           aromatic anhydride.
P-19-0006A.........            3   12/19/2018  CBI..............  (G) Rheology modifier.  (G) Diisocyanate
                                                                                           polymer blocked with
                                                                                           alkoxyamine.
P-19-0008A.........            3   12/12/2018  Allnex USA Inc...  (S) The PMN substance   (G) Substitued
                                                                   is an isolated          polyalkylenepolycarbo
                                                                   intermediate            monocycle ester,
                                                                   incorporated as a       polymer with
                                                                   component in several    dialkanolamine,
                                                                   allnex coating resin    (hydroxyalkoxy)carbon
                                                                   products that are       yl] derivs.,
                                                                   only applied by         (alkoxyalkoxy)
                                                                   Cathodic                alkanolblocked.
                                                                   Electrodeposition
                                                                   (CED) and used as
                                                                   additives for
                                                                   corrosion protection.
P-19-0020A.........            3    1/30/2019  CBI..............  (G) Lubricating         (G) Alkylphenol,
                                                                   additive.               reaction products
                                                                                           with carbon dioxide,
                                                                                           distn. residues from
                                                                                           manuf. of alkylphenol
                                                                                           derivs. and calcium
                                                                                           alkylphenol derivs.
P-19-0023A.........            2   12/14/2018  Allnex USA Inc...  (S) Powder coating      (G) Substituted
                                                                   resin for industrial    carbomonocyle,
                                                                   application.            polymer with
                                                                                           substituted
                                                                                           carbomonocycles,
                                                                                           dialkyl-alkanediol,
                                                                                           alkyl-hydroxyalkyl-
                                                                                           alkanediol and
                                                                                           alkanedioic acid.
P-19-0038..........            2     2/4/2019  Allan Chemical     (S) Ink carrier for     (S) Fatty acids, coco,
                                                Corporation.       the ceramic             iso-Bu esters.
                                                                   industries.
P-19-0039..........            4    2/11/2019  CBI..............  (S) Stabilizer for PVC  (G) Phosphorous acid,
                                                                                           P,P '[substituted
                                                                                           bis(alkyl-polyalkyl
                                                                                           glycol)] Poly
                                                                                           carbomonocycle
                                                                                           substituted ester.
P-19-0040A.........            2     1/3/2019  CBI..............  (G) Intermediate......  (G) Alkyl
                                                                                           bis(dialkylamino
                                                                                           alkyl) amide.
P-19-0048..........            2    1/30/2019  CBI..............  (G) Coating additive..  (S) Poly(oxy-1,2-
                                                                                           ethanediyl), .alpha.-
                                                                                           hydro-.omega.-hydroxy-
                                                                                           , mono-C12-14-alkyl
                                                                                           ethers, phosphates,
                                                                                           sodium salts.
P-19-0049..........            1    1/28/2019  Allnex USA Inc...  (G) Isolated            (G) Fatty acids,
                                                                   intermediate coating    polymers with
                                                                   resin.                  substituted
                                                                                           carbomonocycles,
                                                                                           dialkanolamine, alkyl
                                                                                           substituted
                                                                                           alkanediamine and
                                                                                           halo-substituted
                                                                                           heteromonocycle,
                                                                                           formates (salts).
P-19-0050..........            1     2/4/2019  Kimes              (S) Rust preventative.  (S) Petrolatum
                                                Technologies                               (petroleum),
                                                International,                             oxidized, Bu ester.
                                                Inc.
P-19-0051..........            1     2/5/2019  CBI..............  (G) UV curable inks...  (G) 1,3-
                                                                                           Propanediamine, N1,N1-
                                                                                           dimethyl-, polymers
                                                                                           with alkylene glycol
                                                                                           ether with alkyltriol
                                                                                           (3:1) mixed acrylates
                                                                                           and adipates, and
                                                                                           alkylene glycol
                                                                                           monoacrylate ether
                                                                                           with alkyltriol
                                                                                           (3:1).
P-19-0052..........            2     2/8/2019  Evonik             (S) Hard Surface        (S) Poly(oxy-1,2-
                                                Corporation.       Cleaner.                ethanediyl), alpha-
                                                                                           nonyl-omega-hydroxy-,
                                                                                           branched and linear.
P-19-0053..........            1    2/10/2019  Wacker Chemical    (S) Used as a surface   (S) 1-Butanamine, N-
                                                Corporation.       treatment, sealant,     butyl-N-
                                                                   caulk, and coating      [(triethoxysilyl)meth
                                                                   for mineral building    yl]-.
                                                                   materials such as
                                                                   concrete, brick,
                                                                   limestone, and
                                                                   plaster, as well as
                                                                   on wood, metal and
                                                                   other substrates.
                                                                   Formulations
                                                                   containing the cross-
                                                                   linker provide
                                                                   release and anti-
                                                                   graffiti properties,
                                                                   water repellency,
                                                                   weather proofing, and
                                                                   improved bonding in
                                                                   adhesive/sealant
                                                                   applications. The new
                                                                   substance is a
                                                                   moisture curing cross-
                                                                   linking agent which
                                                                   binds/joins polymers
                                                                   together when cured.
                                                                   Ethanol is released
                                                                   during cure, and once
                                                                   the cure reaction is
                                                                   complete, the product
                                                                   will remain bound in
                                                                   the cured polymer
                                                                   matrix.
P-19-0054..........            1    2/11/2019  CBI..............  (G) automotive          (G) Polyamines,
                                                                   lubricant additive.     reaction products
                                                                                           with succinic
                                                                                           anhydride polyalkenyl
                                                                                           derivs., metal salts.
P-19-0055..........            1    2/12/2019  Rahn USA Corp....  (S) The PMN is solely   (S) 1,3-propanediol, 2-
                                                                   used as a photo         ethyl-2-
                                                                   initiator within UV     (hydroxymethyl)-,
                                                                   curable coating/ink     polymer with oxirane,
                                                                   formulations. This      4-
                                                                   photo initiator is      (dimethylamino)benzoa
                                                                   starting the            te.
                                                                   polymerization
                                                                   process during the UV
                                                                   curing process of the
                                                                   formulation. The
                                                                   curing is achieved by
                                                                   UV light only, no
                                                                   heat is applied.
                                                                   After curing, the PMN
                                                                   substance is no
                                                                   longer available for
                                                                   exposure or release.
P-19-0056..........            1    2/15/2019  CBI..............  (G) The PMN substance   (G) Aliphatic
                                                                   will be imported as a   hydrocarbons, C8-20-
                                                                   raw material for        branched and linear.
                                                                   manufacturing other
                                                                   aliphatic
                                                                   hydrocarbons.
P-19-0057..........            1    2/21/2019  CBI..............  (G) Treatment chemical  (G) Alkanamine,
                                                                                           [(Alkoxy)alkoxy]alkyl
                                                                                           ] alkyl.

[[Page 20126]]

 
P-19-0060..........            1    2/23/2019  Neste Oil US, Inc  (G) The PMN substance   (G) Aliphatic
                                                                   will be used as fuel.   hydrocarbons, C8-18-
                                                                                           branched and linear.
P-19-0061..........            1    2/23/2019  Neste Oil US, Inc  (G) The PMN substance   (G) Aliphatic
                                                                   will be used as fuel.   hydrocarbons, C16-20-
                                                                                           branched and linear.
P-19-0062..........            1    2/27/2019  CBI..............  (G) Industrial solvent  (G)
                                                                                           Hydrochlorofluoroolef
                                                                                           in.
SN-18-0002A........            3   12/12/2018  CBI..............  (G) Flame retardant     (G) Phosphoramidic
                                                                   for textile.            acid, carbomonocyclic-
                                                                                           , diphenylester
                                                                                           (accession number
                                                                                           261553).
SN-19-0003.........            1    1/10/2019  CBI..............  (G) Automotive engine   (G) Silicophosphonate--
                                                                   fluid additive.         sodium silicate.
SN-19-0004A........            3    1/31/2019  CBI..............  (S) A lubricating       (G) Pitch coke.
                                                                   agent used in the
                                                                   production of
                                                                   automotive disc
                                                                   brakes.
----------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required
  information and documents have been provided with the submission prior to the start of the 90 day review
  period, and in no way reflects the final status of a complete submission review.

    In Table II. of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the NOCs 
that have passed an initial screening by EPA during this period: The 
EPA case number assigned to the NOC including whether the submission 
was an initial or amended submission, the date the NOC was received by 
EPA, the date of commencement provided by the submitter in the NOC, a 
notation of the type of amendment (e.g., amendment to generic name, 
specific name, technical contact information, etc.) and chemical 
substance identity.

                             Table II--NOCs Approved * From 02/01/2019 to 02/28/2019
----------------------------------------------------------------------------------------------------------------
                              Received   Commencement    If amendment, type of
         Case No.               date         date              amendment                Chemical substance
----------------------------------------------------------------------------------------------------------------
J-16-0021.................   12/18/2018     12/4/2018  N........................  (G) Modified trichoderma
                                                                                   reesei.
J-18-0026.................   12/21/2018    11/30/2018  N........................  (G) Biopolymer producing
                                                                                   modified microorganism(s),
                                                                                   with chromosomally-borne
                                                                                   modifications.
J-18-0027.................   12/21/2018     12/7/2018  N........................  (G) Biopolymer producing
                                                                                   modified microorganism(s),
                                                                                   with chromosomally-borne
                                                                                   modifications.
J-18-0044.................   12/21/2018    11/26/2018  N........................  (S) Saccharomyces cerevisae
                                                                                   ne095.
J-18-0046.................    2/14/2019     2/12/2019  N........................  (G) Genetically modified
                                                                                   microorganism.
J-19-0003.................    1/15/2019      1/5/2019  N........................  (G) Strain 2 genetically
                                                                                   modified microorganism.
P-08-0431.................    2/12/2019     1/26/2019  N........................  (S) Propane, 2,2-
                                                                                   bis(methylthio)-.
P-14-0443.................    1/23/2019    12/24/2018  N........................  (G) Alkane-alpha,omega-diyl
                                                                                   bis{[(trimethoxysilyl)propyl]
                                                                                   carbamate{time} .
P-14-0519.................    2/15/2019      2/6/2019  N........................  (S) Siloxanes and silicones,
                                                                                   di-me, hydrolysis products
                                                                                   with
                                                                                   dichloroethenylmethylsilane,
                                                                                   3-[2-(2-
                                                                                   methoxyethoxy)ethoxy]propyl
                                                                                   group terminated.
P-15-0178.................    1/23/2019     1/21/2019  N........................  (G) Long chain aliphatic acid
                                                                                   polymers, with adipic acid,
                                                                                   di-meterephthalate, alkane
                                                                                   acid, aromatic isocyanate and
                                                                                   neopentyl glycol.
P-16-0150.................   12/20/2018    11/29/2018  N........................  (G) Chlorofluorocarbon.
P-16-0173A................   12/20/2018      6/6/2016  Update CBI substantiation  (G) Aminoalkyl alaninate
                                                        for site.                  sodium salt (1:1), polymer
                                                                                   with alkyldiol, dialkyl-
                                                                                   alkanediol, alkyldioic acid,
                                                                                   alkyldiol, polyol,
                                                                                   cycloaliphatic diisocyanate,
                                                                                   polyalkylene glycol mono-
                                                                                   alkyl ether-blocked.
P-16-0366A................    2/27/2019    11/28/2017  Update CBI substantiation  (G) Isocyanic acid,
                                                        for manufacturing plant    polymethylenepolyphenylene
                                                        site, submitter and        ester, polymer with
                                                        technical contact.         alkanolamine and
                                                                                   alkylcarbonate, alkoxyethanol-
                                                                                   blocked.
P-16-0514.................    1/22/2019     1/16/2019  N........................  (G) Mixed metal oxide.
P-16-0575.................     1/7/2019      1/3/2019  N........................  (S) Glucosyltransferase.
P-16-0581.................    1/24/2019     1/22/2019  N........................  (G) Polysaccharide.
P-16-0592.................    2/25/2019     2/25/2019  N........................  (S) Fatty acids, C8-C10,
                                                                                   diesters with alpha-hydro-
                                                                                   omega-hydroxypoly(oxy-1,4-
                                                                                   butanediyl).
P-17-0014.................    2/25/2019     2/25/2019  N........................  (S) Fatty acids, C8-C10, mixed
                                                                                   esters with c18-unsatd. fatty
                                                                                   acid dimers and alpha-hydro-
                                                                                   omega-hydroxypoly(oxy-1,4-
                                                                                   butanediyl).
P-17-0261.................    1/22/2019    12/11/2018  N........................  (S) Benzoylbenzoate, esters
                                                                                   with branched polyols.
P-17-0261A................    2/12/2019    12/11/2018  Specific chemical name     (S) Poly(oxy-1,2-
                                                        updated.                   ethanediyl),alpha-(2-
                                                                                   benzoylbenzoyl)-omega-[(2-
                                                                                   benzoylbenzoyl)oxy]-.
P-17-0261A................    2/27/2019    12/11/2018  Specific name CAS number   (S) Poly(oxy-1,2-
                                                        updated.                   ethanediyl),alpha-(2-
                                                                                   benzoylbenzoyl)-omega-[(2-
                                                                                   benzoylbenzoyl)oxy]-.
P-17-0320.................    1/17/2019     1/15/2019  N........................  (G) Dodecanedioic acid and 1,6-
                                                                                   hexane diol polymer with 3-
                                                                                   hydroxy-2,2-dimethylpropyl
                                                                                   2,2-dimethylhydracrylate,
                                                                                   neopentylglycol, 1,2
                                                                                   ethanediol, adipic acid,
                                                                                   isophthalic acid,
                                                                                   terephthalic acid, 2-
                                                                                   oxooxopane, bayflex 2002h and
                                                                                   1,1'-
                                                                                   methylenebis[isocyanatobenzen
                                                                                   e].
P-18-0068.................     1/2/2019    12/21/2018  N........................  (G) Metal, alkylcarboxylate
                                                                                   oxo complexes.
P-18-0077.................    1/11/2019    12/18/2018  N........................  (S) Urea, reaction products
                                                                                   with N-butylphophorothioic
                                                                                   triamide and formaldehyde.
P-18-0082.................     2/6/2019      1/9/2019  N........................  (G) Aspartic acid, tallow
                                                                                   modified diester.
P-18-0088.................     1/3/2019      1/2/2019  N........................  (G) Quaternary ammonium salt.
P-18-0116.................     1/7/2019    12/18/2018  N........................  (S) Castor oil, reaction
                                                                                   products with soybean oil.
P-18-0224.................     1/9/2019    12/13/2018  N........................  (G) Alkenoic acid, polymer
                                                                                   with alkenylcarbomonocycle,
                                                                                   [alkanediylbis(substitutedalk
                                                                                   ylene)] bis[heteromonocycle]
                                                                                   and (alkylalkenyl) aromatic,
                                                                                   salt.
P-18-0225.................     1/9/2019    12/13/2018  N........................  (G) Alkenoic acid, polymer
                                                                                   with substituted
                                                                                   alkyloxirane,
                                                                                   alkenylcarbomonocycle, alkyl
                                                                                   substituted alkyl alkanediol
                                                                                   and (alkylalkenyl) aromatic
                                                                                   salt.
P-18-0319.................    2/18/2019     1/29/2019  N........................  (G) Plant oil fatty acids,
                                                                                   alkyl esters.

[[Page 20127]]

 
P-18-0324.................    1/16/2019    12/23/2018  N........................  (G) Organic acid dimethyl
                                                                                   ester, polymer with mixed
                                                                                   alkanediols and 5-isocyanato-
                                                                                   1-(isocyanatomethyl)-1,3,3-
                                                                                   trimethylcyclohexane,
                                                                                   trimethoxysilylaklanamine-
                                                                                   blocked.
----------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required
  information and documents have been provided with the submission.

    In Table III. of this unit, EPA provides the following information 
(to the extent such information is not subject to a CBI claim) on the 
test information that have passed an initial screening by EPA during 
this time period: The EPA case number assigned to the test information; 
the date the test information was received by EPA, the type of test 
information submitted, and chemical substance identity.

                       Table III--Test Information Received From 02/01/2019 to 02/28/2019
----------------------------------------------------------------------------------------------------------------
           Case No.              Received date      Type of test information            Chemical substance
----------------------------------------------------------------------------------------------------------------
P-19-0019.....................        2/4/2019  In Vitro Skin Corrosion:         (G) haloalkane.
                                                 Reconstructed Human Epidermis
                                                 (RHE) Test Method (OECD Test
                                                 Guideline 431).
P-18-0306.....................        2/6/2019  Bacterial Reverse Mutation Test/ (S) 2-propenoic acid, 2-methyl-
                                                 Ames Assay (OECD Test            , 2-hydroxyethyl ester,
                                                 Guideline 471) and Genetic       polymer with butyl 2-
                                                 Toxicology: Micronucleus Test    propenoate, ethenylbenzene and
                                                 (OECD Test Guideline 474).       2-oxiranylmethyl 2-methyl-2-
                                                                                  propenoate.
P-19-0033.....................        2/8/2019  Bacterial Reverse Mutation Test/ (G) sulfonium, triphenyl-, 5-
                                                 Ames Assay (OECD Test            (alkyl) fluoropentane
                                                 Guideline 471), Acute Oral       derivative.
                                                 Toxicity (OECD Test Guideline
                                                 420).
P-19-0054.....................       2/12/2019  Acute Oral Toxicity (OECD Test   (G) polyamines, reaction
                                                 Guidelines 423), Acute Dermal    products with succinic
                                                 Toxicity (OECD Test Guidelines   anhydride polyalkenyl derivs.,
                                                 402), Acute Eye Irritation       metal salts, polyamines,
                                                 (OECD Test Guidelines 405),      reaction products with
                                                 Bovine Corneal Opacity           succinic anhydride polyalkenyl
                                                 Permeability (OECD Test          derivs., metal salts.
                                                 Guidelines 437), Acute Dermal
                                                 Irritation (OECD Test
                                                 Guidelines 404), In Vitro Skin
                                                 Irritation (OECD Test
                                                 Guidelines 439), In Vitro Skin
                                                 Corrosion (OECD Test
                                                 Guidelines 431), Skin
                                                 Sensitization (OECD Test
                                                 Guidelines 406), Bacterial
                                                 Reverse Mutation Test/Ames
                                                 Assay (OECD Test Guideline
                                                 471), In Vitro Mammalian
                                                 Chromosome Aberration (OECD
                                                 Test Guideline 473), In Vitro
                                                 Mammalian Cell Gene Mutation
                                                 (OECD Test Guideline 490),
                                                 Combined Repeated Dose
                                                 Toxicity With The Reproduction/
                                                 Development Toxicity Screening
                                                 Test (OECD Test Guideline
                                                 422), and Toxicokinetic
                                                 Assessment.
P-11-0264.....................       2/13/2019  Anaerobic Aquatic Metabolism     (G) brominated polyphenyl
                                                 (U.S. EPA Series 835--Fate,      ether.
                                                 Transport And Transformation
                                                 Test Guidelines OPPTS
                                                 835.4400).
P-16-0543.....................       2/13/2019  Exposure Monitoring Report.....  (G) halogenophosphoric acid
                                                                                  metal salt.
P-16-0410.....................       2/14/2019  In Vitro Skin Irritation (OECD   (G) phosphonic acid,
                                                 Test Guidelines 439), In Vitro   [(hydroxycyclosiloxanediyl)
                                                 Skin Corrosion (OECD Test        alkanediyl] dialkyl ester,
                                                 Guidelines 431).                 alkali metal salt, reaction
                                                                                  products with alkali metal
                                                                                  silicate.
P-18-0170.....................       2/14/2019  Bacterial Reverse Mutation Test/ (S) 1-propanaminium, N,N'-
                                                 Ames Assay (OECD Test            (oxydi-2,1-ethanediyl)bis[3-
                                                 Guideline 471).                  chloro-2-hydroxy-N,N-dimethyl-
                                                                                  , dichloride.
P-18-0128.....................       2/15/2019  In Vitro Skin Irritation (OECD   (S) inulin, 2-hydroxy-3-
                                                 Test Guidelines 439), In-Vitro   (trimethylammonio)propyl
                                                 Eye Irritation (OECD Test        ether, chloride.
                                                 Guidelines 492).
P-16-0581.....................       2/20/2019  Biosolubility In Simulated Lung  (G) polysaccharide.
                                                 Fluids.

[[Page 20128]]

 
P-18-0321.....................       2/20/2019  In Vitro Mutagenesis Studies: 3- (G) poly(oxy-ethanediyl),
                                                 Test Battery, Guinea Pig         (methyl ethanediyl)bis[hydroxy-
                                                 Maximization Test, Acute         .
                                                 toxicity to the marine alga
                                                 Skeleto11ema costatum, Acute
                                                 Toxicity to Acarna tonsa,
                                                 Acute toxicity to acartia
                                                 tonsa, acute toxicity to
                                                 juvenile turbot, marine algal
                                                 inhibition test, Ready
                                                 Biodegradability (OECD Test
                                                 Guidelines 301F),
                                                 Toxicological tests on
                                                 polyglycol E-400, Evaluation
                                                 of polyglycol E-400 in the
                                                 aquatic environment, skin
                                                 imitation and skin
                                                 sensitization, Ready
                                                 Biodegradability(OECD Test
                                                 Guidelines 301), EFAST
                                                 Report,EPIsuite (2) Reports,
                                                 IRER Results, Oncologic
                                                 Profiler in OECD QSAR Toolbox
                                                 Results, Justification for
                                                 Hazard Determination,
                                                 Sustainable Futures Summary
                                                 Assessment Using P2 Framework
                                                 Models, Opinion of the
                                                 Scientific Panel on Food
                                                 Additives, Flavourings,
                                                 Processing Aids and Materials.
                                                Literature Articles: Fruijtier-
                                                 Polloth, Hermansky et al.,
                                                 Herold 1989 ADH PEGs, JECFA
                                                 WHO Summary, Biodegradation of
                                                 Polyethers (PG, PPG, PTMG, and
                                                 Others) by Dr. Kawai, Subacute
                                                 Tox and Irritation of PEG by
                                                 Smyth, Chronic Oral Tox of
                                                 PEGs by Smyth.
P-18-0124.....................       2/21/2019  Daphnid Chronic Toxicity Test    (S) lithium nickel potassium
                                                 (OECD Test Guidelines 202),      oxide.
                                                 Alga Growth Inhibition (OECD
                                                 Test Guidelines 201), Fish
                                                 Acute Toxicity Test,
                                                 Freshwater And Marine (OECD
                                                 Test Guidelines 203).
P-05-0107.....................       2/26/2019  Aerobic Transformation In        (G) perfluoroalkylethyl
                                                 Aquatic Sediment Systems (OECD   methacrylate copolymer organic
                                                 Test Guidelines 308).            acid salt.
P-05-0075.....................       2/26/2019  Aerobic Transformation In        (G) perfluoroalkylethyl
                                                 Aquatic Sediment Systems (OECD   methacrylate copolymer.
                                                 Test Guidelines 308).
P-06-0388.....................       2/26/2019  Aerobic Transformation In        (G) perfluoroalkylethylmeth-
                                                 Aquatic Sediment Systems (OECD   acrylate copolymer.
                                                 Test Guidelines 308).
P-00-0281.....................       2/28/2019  Freshwater AAP Algal Medium,     (G) alkylarylsulfonic acid,
                                                 Daphnia Sp. Acute                sodium salts.
                                                 Immobilisation Test (OECD Test
                                                 Guideline 202), A 96-Hour
                                                 Static Acute Toxicity Test
                                                 with The Fathead Minnow (OECD
                                                 Test Guideline 203), A 96-Hour
                                                 Toxicity Test with the
                                                 Freshwater Alga (OECD Test
                                                 Guideline 201), and Surface
                                                 Tension of Aqueous Solutions
                                                 (OECD Test Guideline 115).
----------------------------------------------------------------------------------------------------------------

    If you are interested in information that is not included in these 
tables, you may contact EPA's technical information contact or general 
information contact as described under FOR FURTHER INFORMATION CONTACT 
to access additional non-CBI information that may be available.

    Authority: 15 U.S.C. 2601 et seq.

    Dated: April 19, 2019.
Pamela Myrick,
Director, Information Management Division, Office of Pollution 
Prevention and Toxics.
[FR Doc. 2019-09378 Filed 5-7-19; 8:45 am]
BILLING CODE 6560-50-P


