
[Federal Register Volume 81, Number 106 (Thursday, June 2, 2016)]
[Notices]
[Pages 35351-35356]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-13028]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OPPT-2016-0023; FRL-9946-86]


Certain New Chemicals; Receipt and Status Information for April 
2016

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA) 
to publish in the Federal Register a notice of receipt of a 
premanufacture notice (PMN); an application for a test marketing 
exemption (TME), both pending and/or expired; and a periodic status 
report on any new chemicals under EPA review and the receipt of notices 
of commencement (NOC) to

[[Page 35352]]

manufacture those chemicals. This document covers the period from April 
1, 2016 to April 29, 2016.

DATES: Comments identified by the specific case number provided in this 
document, must be received on or before July 5, 2016.

ADDRESSES: Submit your comments, identified by docket identification 
(ID) number EPA-HQ-OPPT-2016-0023, and the specific PMN number or TME 
number for the chemical related to your comment, by one of the 
following methods:
     Federal eRulemaking Portal: http://www.regulations.gov. 
Follow the online instructions for submitting comments. Do not submit 
electronically any information you consider to be Confidential Business 
Information (CBI) or other information whose disclosure is restricted 
by statute.
     Mail: Document Control Office (7407M), Office of Pollution 
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 
Pennsylvania Ave. NW., Washington, DC 20460-0001.
     Hand Delivery: To make special arrangements for hand 
delivery or delivery of boxed information, please follow the 
instructions at http://www.epa.gov/dockets/contacts.html.
    Additional instructions on commenting or visiting the docket, along 
with more information about dockets generally, is available at http://www.epa.gov/dockets.

FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim 
Rahai, Information Management Division, 7407M, Office of Pollution 
Prevention and Toxics, Environmental Protection Agency, 1200 
Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number: 
(202) 564-8593; email address: rahai.jim@epa.gov.
    For general information contact: The TSCA-Hotline, ABVI-Goodwill, 
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 
554-1404; email address: TSCA-Hotline@epa.gov.

SUPPLEMENTARY INFORMATION: 

I. General Information

A. Does this action apply to me?

    This action is directed to the public in general. As such, the 
Agency has not attempted to describe the specific entities that this 
action may apply to. Although others may be affected, this action 
applies directly to the submitters of the actions addressed in this 
document.

B. What should I consider as I prepare my comments for EPA?

    1. Submitting CBI. Do not submit this information to EPA through 
regulations.gov or email. Clearly mark the part or all of the 
information that you claim to be CBI. For CBI information in a disk or 
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as 
CBI and then identify electronically within the disk or CD-ROM the 
specific information that is claimed as CBI. In addition to one 
complete version of the comment that includes information claimed as 
CBI, a copy of the comment that does not contain the information 
claimed as CBI must be submitted for inclusion in the public docket. 
Information so marked will not be disclosed except in accordance with 
procedures set forth in 40 CFR part 2.
    2. Tips for preparing your comments. When preparing and submitting 
your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html.

II. What action is the Agency taking?

    This document provides receipt and status reports, which cover the 
period from April 1, 2016 to April 29, 2016, and consists of the PMNs 
and TMEs both pending and/or expired, and the NOCs to manufacture a new 
chemical that the Agency has received under TSCA section 5 during this 
time period.

III. What is the Agency's authority for taking this action?

    Under TSCA, 15 U.S.C. 2601 et seq., EPA classifies a chemical 
substance as either an ``existing'' chemical or a ``new'' chemical. Any 
chemical substance that is not on EPA's TSCA Inventory is classified as 
a ``new'' chemical, while those that are on the TSCA Inventory are 
classified as an ``existing'' chemical. For more information about the 
TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm.
    Anyone who plans to manufacture or import a new chemical substance 
for a non-exempt commercial purpose is required by TSCA section 5 to 
provide EPA with a PMN, before initiating the activity. Section 5(h)(1) 
of TSCA authorizes EPA to allow persons, upon application, to 
manufacture (includes import) or process a new chemical substance, or a 
chemical substance subject to a significant new use rule (SNUR) issued 
under TSCA section 5(a), for ``test marketing'' purposes, which is 
referred to as a test marketing exemption, or TME. For more information 
about the requirements applicable to a new chemical go to: http://www.epa.gov/oppt/newchems.
    Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish 
in the Federal Register a notice of receipt of a PMN or an application 
for a TME and to publish in the Federal Register periodic reports on 
the status of new chemicals under review and the receipt of NOCs to 
manufacture those chemicals.

IV. Receipt and Status Reports

    As used in each of the tables in this unit, (S) indicates that the 
information in the table is the specific information provided by the 
submitter, and (G) indicates that the information in the table is 
generic information because the specific information provided by the 
submitter was claimed as CBI.
    For the 58 PMNs received by EPA during this period, Table 1 
provides the following information (to the extent that such information 
is not claimed as CBI): The EPA case number assigned to the PMN; the 
date the PMN was received by EPA; the projected end date for EPA's 
review of the PMN; the submitting manufacturer/importer; the potential 
uses identified by the manufacturer/importer in the PMN; and the 
chemical identity.

                                               Table 1--PMNs Received From April 1, 2016 to April 29, 2016
--------------------------------------------------------------------------------------------------------------------------------------------------------
                                                       Projected end
              Case No.                 Date received   date for EPA    Manufacturer/ Importer             Use(s)                  Chemical identity
                                                          review
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-16-0095...........................       4/11/2016       7/10/2016  CBI....................  (G) Flame retardant additive  (G) Phenol-formaldehyde
                                                                                                                              resin.
P-16-0119...........................       4/20/2016       7/19/2016  CBI....................  (G) Intermediate............  (G) Chlorofluorocarbon.
P-16-0150...........................       4/26/2016       7/25/2016  CBI....................  (G) Intermediate............  (G) Chlorofluorocarbon.

[[Page 35353]]

 
P-16-0267...........................       4/20/2016       7/19/2016  Allnex USA, Inc........  (S) Electro-deposition        (G) Fatty acids, reaction
                                                                                                primer.                       products with alkylamine,
                                                                                                                              polymers with substituted
                                                                                                                              carbomonocycle,
                                                                                                                              substituted alkylamines,
                                                                                                                              heteromonocycle and
                                                                                                                              substituted alkanoate,
                                                                                                                              lactates (salts).
P-16-0277...........................        4/1/2016       6/30/2016  Organic Dyestuffs        (S) Metalized dye for dyeing  (S) Chromate(1-), hydroxy[2-
                                                                       Corporation.             wool with good fastness       (hydroxy-ko)-3-[2-[2-
                                                                                                properties.                   (hydroxy-ko)-1-
                                                                                                                              naphthalenyl]diazenyl-kn1]-
                                                                                                                              5-nitrobenzenesulfonato(3-
                                                                                                                              )]-, sodium (1:1).
P-16-0279...........................        4/4/2016        7/3/2016  Akzo Nobel Surface       (G) Component in paints.....  (S) Hexanamide, n,-[3-
                                                                       Chemistry, LLC.                                        (dimethylamino)propyl]-,
                                                                                                                              compd, with 2-
                                                                                                                              methyloxirane polymer with
                                                                                                                              oxirane mono (2-
                                                                                                                              ethylhexyl) ether
                                                                                                                              phosphate.
P-16-0281...........................       4/11/2016       7/10/2016  CBI....................  (G) Reactive polyol.........  (G) Fatty alcohols--dimers,
                                                                                                                              trimmers, polymers.
P-16-0287...........................        4/1/2016       6/30/2016  CBI....................  (G) Hardener for epoxy        (G) Alkanoic acid, 2-
                                                                                                coating.                      substituted-methyl ester,
                                                                                                                              reaction products with
                                                                                                                              aromatic diamine-
                                                                                                                              [alkanediylbis(oxymethylen
                                                                                                                              e)]bis[oxirane] polymer.
P-16-0289...........................        4/1/2016       6/30/2016  CBI....................  (G) Extrusion compounding     (G) Semi-aromatic
                                                                                                resin molding resin.          polyamide.
P-16-0290...........................        4/1/2016       6/30/2016  CBI....................  (G) Fuel additive...........  (G) Copolymer of maleic
                                                                                                                              acid and olefin.
P-16-0291...........................        4/3/2016        7/2/2016  CBI....................  (G) Curing agent............  (G) 1,3-
                                                                                                                              cyclohexanedimethanamine
                                                                                                                              adduct.
P-16-0292...........................        4/5/2016        7/4/2016  CBI....................  (S) Intermediate for use in   (G) Depolymerized waste
                                                                                                the manufacture of polymers.  plastics.
P-16-0293...........................       4/13/2016       7/12/2016  Charkit Chemical         (S) Compounding of fragrance  (S) Octanoic acid,
                                                                       Corporation.             for industrial cleaners/      phenylmethyl ester.
                                                                                                janitorial compounds,
                                                                                                detergents, etc.
P-16-0299...........................       4/20/2016       7/19/2016  CBI....................  (S) Reactive (meth)acrylate   (G) Polyurethane,
                                                                                                oligomer for ultra violet     methacrylate-blocked.
                                                                                                cured 3d printed parts.
P-16-0300...........................        4/6/2016        7/5/2016  H.B. Fuller Company....  (G) Industrial adhesive.....  (G) Oxirane, 2-methyl-,
                                                                                                                              polymer with 1,3-xylylene
                                                                                                                              diisocyanate and oxirane,
                                                                                                                              3-(trimethoxysilyl)propyl
                                                                                                                              isocyanate.
P-16-0301...........................        4/6/2016        7/5/2016  CBI....................  (G) Intermediate............  (G) Propyl silsesquioxanes,
                                                                                                                              hydrogen-terminated.
P-16-0302...........................        4/6/2016        7/5/2016  CBI....................  (G) Plastic additive........  (G) Organic modified propyl
                                                                                                                              silsesquioxane.
P-16-0303...........................        4/7/2016        7/6/2016  CBI....................  (G) Use for the production    (G) Alkyl methyacrylate
                                                                                                of acrylic resin for          polymer with styrene,
                                                                                                waterborne exterior           amino acrylate and acrylic
                                                                                                coatings composition.         acid, ammonium salt.
P-16-0304...........................        4/7/2016        7/6/2016  CBI....................  (G) Industrial adhesive.....  (G) Polyurea grease.
P-16-0305...........................        4/7/2016        7/6/2016  CBI....................  (G) Industrial Adhesive.....  (G) Polyurea grease.
P-16-0307...........................        4/8/2016        7/7/2016  CBI....................  (G) Open non dispersive use.  (G)
                                                                                                                              Heteropolycycliccarboxylic
                                                                                                                              acid, 1,3-dihydro-
                                                                                                                              disubstituted-, polymer
                                                                                                                              with 1,1'-methylenebis[4-
                                                                                                                              isocyanatobenzene],
                                                                                                                              reaction products with
                                                                                                                              silica.
P-16-0308...........................        4/8/2016        7/7/2016  Itaconix Corporation...  (G) Reactive Monomer........  (S) Butanedioic acid, 2-
                                                                                                                              methylene-, 1,4-bis (2-
                                                                                                                              methylpropyl) ester.

[[Page 35354]]

 
P-16-0309...........................        4/8/2016        7/7/2016  CBI....................  (G) PMN substances are        (G) Bisamide mixture.
                                                                                                intended for use as
                                                                                                rheological or thixotropic
                                                                                                agents used in the
                                                                                                production of solvent based
                                                                                                industrial coatings, high
                                                                                                solid aromatic paints,
                                                                                                adhesives, sealants, and
                                                                                                other types of paints and
                                                                                                topcoats.
P-16-0310...........................        4/8/2016        7/7/2016  CBI....................  (G) PMN substances are        (G) Bisamide mixture.
                                                                                                intended for use as
                                                                                                rheological or thixotropic
                                                                                                agents used in the
                                                                                                production of solvent based
                                                                                                industrial coatings, high
                                                                                                solid aromatic paints,
                                                                                                adhesives, sealants, and
                                                                                                other types of paints and
                                                                                                topcoats.
P-16-0311...........................        4/8/2016        7/7/2016  CBI....................  (S) Coatings for wood metal   (G) Aromatic dicarboxylic
                                                                                                and plastic.                  acid, polymer with alkyl
                                                                                                                              dicarcoxylic acid, alkyl
                                                                                                                              diol,
                                                                                                                              hydroxy(hydroxyalkyl)alkyl
                                                                                                                              carboxylic acid,
                                                                                                                              methylenebis(isocyanatocyc
                                                                                                                              loalkane) and
                                                                                                                              alkylethylidene
                                                                                                                              bis(phenyleneoxy)bis[alkyl
                                                                                                                              alcohol].
P-16-0312...........................        4/8/2016        7/7/2016  CBI....................  (S) Coatings for wood metal   (G) Aromatic dicarboxylic
                                                                                                and plastic.                  acid, polymer with
                                                                                                                              cycloalkanemethanol,
                                                                                                                              alkanediamine, alkanedioic
                                                                                                                              acid, hydroxy-2-
                                                                                                                              (hydroxyalkyl)-2-
                                                                                                                              alkylcarboxylic acid,
                                                                                                                              methylenebis[isocyanatocyc
                                                                                                                              loalkane] and
                                                                                                                              [(methylethylidene)bis(phe
                                                                                                                              nyleneoxy)]bis[alkanol].
P-16-0313...........................       4/11/2016       7/10/2016  Honeyol, Inc...........  (S) Use in production of      (S) Tar acids (shale oil),
                                                                                                resins (raw material used     c6-9-fraction,
                                                                                                in the production of          alkylphenols, low-boiling.
                                                                                                resins).
P-16-0314...........................       4/11/2016       7/10/2016  Firmenich, Inc.........  (G) As part of a fragrance    (S) Ethanone, 1-(5-propyl-
                                                                                                formula.                      1,3-benzodioxol-2-yl)-
P-16-0315...........................       4/11/2016       7/10/2016  CBI....................  (S) Industrial rubber         (G) Alkyldiene, polymer,
                                                                                                formulation.                  terminated
                                                                                                                              alkoxysilylalkylcarbamate.
P-16-0316...........................       4/11/2016       7/10/2016  CBI....................  (G) Drilling chemical.......  (G) Aliphatic polyester.
P-16-0317...........................       4/11/2016       7/10/2016  CBI....................  (G) Drilling chemical.......  (G) Aliphatic polyester.
P-16-0322...........................       4/22/2016       7/21/2016  CBI....................  (G) Pulp bleaching catalyst.  (G) Manganese cyclic
                                                                                                                              (tri)amine chloride
                                                                                                                              complex.
P-16-0322...........................       4/22/2016       7/21/2016  CBI....................  (G) Textile bleaching         (G) Manganese cyclic
                                                                                                catalyst.                     (tri)amine chloride
                                                                                                                              complex.
P-16-0323...........................       4/13/2016       7/12/2016  Allnex USA, Inc........  (G) Coating resin...........  (G) Alkylaldehyde, reaction
                                                                                                                              products with substituted
                                                                                                                              carbomonocycle-substituted
                                                                                                                              heteromonocycle-alkylene
                                                                                                                              glycol bis
                                                                                                                              [[[substituted(oxoneoalky)
                                                                                                                              oxy]alkyl]amino]alky]
                                                                                                                              ether polymer and alkyl
                                                                                                                              substituted alkanediamine,
                                                                                                                              acetate salts.
P-16-0324...........................       4/13/2016       7/12/2016  CBI....................  (G) Adhesive for open non-    (G) Ultra violet-curable
                                                                                                descriptive use.              urethane acrylate.
P-16-0325...........................       4/13/2016       7/12/2016  CBI....................  (G) Oil & Gas extraction....  (G) Polymer of substituted
                                                                                                                              acrylic acid and
                                                                                                                              bromohexane.
P-16-0326...........................       4/27/2016       7/26/2016  Firmenich, Inc.........  (G) As part of a fragrance    (S) Propanoic acid, 2,2-
                                                                                                formula.                      dimethyl-,1-methyl-2-(1-
                                                                                                                              methylethoxy)-2-oxoethyl
                                                                                                                              ester.
P-16-0327...........................       4/14/2016       7/13/2016  CBI....................  (G) Additive in rubber tires  (G) Alkenoic acid, polymer
                                                                                                                              with alkylalkenoate,
                                                                                                                              sodium salt.

[[Page 35355]]

 
P-16-0328...........................       4/19/2016       7/18/2016  CBI....................  (G) Intermediate............  (G) Terephthalic acid,
                                                                                                                              polymer with
                                                                                                                              alkanepolycarboxylic
                                                                                                                              acids, alkanepolyols,
                                                                                                                              isophthalic acid,
                                                                                                                              polyetherpolyol, 1,1-
                                                                                                                              methylenebis[isocyanatoben
                                                                                                                              zene], phthalic anhydride
                                                                                                                              and a substituted
                                                                                                                              alkanepolyol.
P-16-0329...........................       4/19/2016       7/18/2016  CBI....................  (G) Adhesive component......  (G) Polymer of
                                                                                                                              alkanepolycarboxylic
                                                                                                                              acids, alkanepolyols,
                                                                                                                              isophthalic acid,
                                                                                                                              polyetherpolyols, 1,1-
                                                                                                                              methylenebis[isocyanatoben
                                                                                                                              zene], terephthalic acid,
                                                                                                                              phthalic anhydride and a
                                                                                                                              substituted alkanepolyol.
P-16-0330...........................       4/19/2016       7/18/2016  H.B. Fuller Company....  (G) Industrial adhesive.....  (G) Hydroxy functional
                                                                                                                              triglyceride polymer with
                                                                                                                              glycerol mono-ester and
                                                                                                                              1,1'-methylenebis[4-
                                                                                                                              isocyanatobenzene].
P-16-0331...........................       4/19/2016       7/18/2016  H.B. Fuller Company....  (G) Industrial adhesive.....  (G) Hydroxy functional
                                                                                                                              triglyceride polymer with
                                                                                                                              glycerol mono-ester and
                                                                                                                              1,1'-
                                                                                                                              methylenebis[isocyanatoben
                                                                                                                              zene].
P-16-0332...........................       4/21/2016       7/20/2016  CBI....................  (G) Component of coating....  (G) Carbomonocycle
                                                                                                                              phosphate metal salt.
P-16-0334...........................       4/22/2016       7/21/2016  Lamberti USA, Inc......  (G) Additive for industrial   (G) Polymeric amide.
                                                                                                purposes.
P-16-0335...........................       4/22/2016       7/21/2016  Lamberti USA, Inc......  (G) Additive for industrial   (G) Polymeric amide.
                                                                                                purposes.
P-16-0336...........................       4/22/2016       7/21/2016  CBI....................  (G) Fuel additive--           (G) Polyolefin ester.
                                                                                                destructive use.
P-16-0337...........................       4/25/2016       7/24/2016  CBI....................  (S) Monomer.................  (G) Aliphatic acrylate.
P-16-0338...........................       4/26/2016       7/25/2016  CBI....................  (G) Dyestuff................  (G) Substituted xanthene
                                                                                                                              derivative.
P-16-0339...........................       4/26/2016       7/25/2016  CBI....................  (G) Dyestuff................  (G) Azo derivatives.
P-16-0340...........................       4/26/2016       7/25/2016  Solazyme, Inc..........  (G) Feedstock for             (G) Glycerides, c8-18 and
                                                                                                oleochemical industry.        c18 unsaturated, from
                                                                                                                              fermentation.
P-16-0340...........................       4/26/2016       7/25/2016  Solazyme, Inc..........  (G) Renewable oil source for  (G) Glycerides, c8-18 and
                                                                                                fuels.                        c18 unsaturated, from
                                                                                                                              fermentation.
P-16-0341...........................       4/27/2016       7/26/2016  Perstorp Polyols.......  (G) Elastomer...............  (S) 2-oxepanone,
                                                                                                                              homopolymer, ester with
                                                                                                                              1,6-hexanediol.
P-16-0341...........................       4/27/2016       7/26/2016  Perstorp Polyols.......  (S) Industrial coatings.....  (S) 2-oxepanone,
                                                                                                                              homopolymer, ester with
                                                                                                                              1,6-hexanediol.
P-16-0341...........................       4/27/2016       7/26/2016  Perstorp Polyols.......  (S) Adhesive components.....  (S) 2-oxepanone,
                                                                                                                              homopolymer, ester with
                                                                                                                              1,6-hexanediol.
P-16-0342...........................       4/27/2016       7/26/2016  CBI....................  (S) Modified acrylic polymer  (G) Modified acrylic
                                                                                                used as a dispersant for      polymer.
                                                                                                deflocculation of pigments
                                                                                                in industrial paints and
                                                                                                coatings.
P-16-0343...........................       4/27/2016       7/26/2016  CBI....................  (S) Modified urethane         (G) Modified urethane
                                                                                                polymer used as a             polymer.
                                                                                                dispersant for
                                                                                                deflocculation of pigments
                                                                                                in industrial paints and
                                                                                                coatings.
P-16-0344...........................       4/27/2016       7/26/2016  CBI....................  (S) Modified acrylic polymer  (G) Modified urethane
                                                                                                used as a dispersant for      polymer.
                                                                                                deflocculation of pigments
                                                                                                in industrial paints and
                                                                                                coatings.
P-16-0345...........................       4/28/2016       7/27/2016  CBI....................  (G) Processing aid..........  (G) Acrylamide, polymer
                                                                                                                              with methacrylic acid
                                                                                                                              derivatives.
--------------------------------------------------------------------------------------------------------------------------------------------------------

    For the 31 NOCs received by EPA during this period, Table 2 
provides the following information (to the extent that such information 
is not claimed as CBI): The EPA case number assigned to the NOC; the 
date the NOC was received by EPA; the projected date of commencement 
provided by the submitter in the NOC; and the chemical identity.

[[Page 35356]]



                           Table 2--NOCs Received From April 1, 2016 to April 29, 2016
----------------------------------------------------------------------------------------------------------------
                                                      Projected date
              Case No.                 Date received        of                     Chemical identity
                                                       commencement
----------------------------------------------------------------------------------------------------------------
P-05-0522...........................       4/26/2016       3/31/2016  (S) [1,1'-biphenyl]-4-carboxaldehyde.
P-11-0243...........................        4/1/2016       3/12/2016  (G) Alkanedioic acid polymer with
                                                                       alkanediol and diisocyanatohexane.
P-13-0670...........................       4/25/2016        4/4/2016  (G) Alkyl-[4-
                                                                       (carbomonocyclesubstituted)carbomonocycle
                                                                       ]-(dialkyl-hydroxycarbomonocycle)alkane
                                                                       derivative.
P-13-0671...........................       4/25/2016        4/4/2016  (G) Alkyl-[4-
                                                                       (carbomonocyclesubstituted)carbomonocycle
                                                                       ]-(dialkyl-hydroxycarbomonocycle)alkane
                                                                       derivative.
P-14-0166...........................        4/4/2016        3/3/2016  (G) Fatty acid amide.
P-14-0185...........................        4/4/2016        3/5/2016  (G) Fatty acid amide acetate.
P-14-0800...........................       4/22/2016       4/11/2016  (G) Solvent red 252.
P-15-0046...........................       4/12/2016        4/1/2016  (S) Propanol, oxybis, polymer with
                                                                       bis(isocyanatomethyl)cyclohexane and
                                                                       alpha-hydro-omega-hydroxypoly(oxy-1,4-
                                                                       butanediyl).
P-15-0074...........................        4/8/2016       3/30/2016  (G) Trisiloxane alkoxylate.
P-15-0329...........................       4/12/2016       3/12/2016  (S) Urea, n, n``-1,6-hexanediylbis[n'-
                                                                       [(1s)-1-phenylethyl]-.
P-15-0382...........................       4/29/2016       4/20/2016  (G) Polyitaconic acid, sodium zinc salt.
P-15-0409...........................        4/5/2016       3/24/2016  (G) Substituted alkanolamine ether.
P-15-0515...........................       4/19/2016        4/7/2016  (G) 2-propenoic acid, 2-methyl, methyl
                                                                       ester, polymer with ethenylbenzene, ethyl
                                                                       2-propenoate, 2-oxiranylmethyl 2-methyl-2-
                                                                       propenoate and 1,2-propanediol mono(2-
                                                                       methyl-2-propenoate), reaction products
                                                                       with dialkylamine, carboxylate salt.
P-15-0567...........................        4/8/2016       3/10/2016  (S) Hexanedioic acid, polymer with 1,?6-
                                                                       ?hexanediol, 1,?3-?isobenzofurandione, 5-
                                                                       ?isocyanato-?1-?(isocyanatomethyl)?-
                                                                       ?1,?3,?3-?trimethylcyclohexane and
                                                                       1,?2,?3-?propanetriol, 2-?hydroxyethyl
                                                                       acrylate-?blocked.
P-15-0623...........................       4/18/2016       4/14/2016  (G) Fatty acids, polymers with bisphenol
                                                                       a, nutshell liq., epichlorohydrin,
                                                                       alkylenediamine, formaldehyde and
                                                                       polyalkylenepolyamine.
P-15-0733...........................        4/4/2016       3/13/2016  (G) Alkane carboxylic acid, hydroxy,
                                                                       hydroxyalkyl-alkyl, polymer with .alpha.-
                                                                       hydro-.omega.-hydroxypoly(oxy-1,2-
                                                                       ethanediyl) ether with alkyl-
                                                                       (hydroxyalkyl)-alkanediol (x:1), .alpha.-
                                                                       hydro-.omega.-hydroxypoly[oxy(alkyl-
                                                                       alkyldiyl)] and alkylenebis
                                                                       [isocyanatoalkane],-blocked.
P-15-0737...........................       4/12/2016        4/7/2016  (G) Diammonium salt of phosphate
                                                                       methacrylate.
P-15-0737...........................       4/12/2016        4/7/2016  (G) Monoammonium salt of phosphate
                                                                       methacrylate.
P-15-0769...........................       4/14/2016        4/4/2016  (G) Polyurethane silane.
P-16-0009...........................        4/1/2016        3/9/2016  (S) Fatty acids, castor-oil, esters with
                                                                       polyethylene glycol ether with glycerol
                                                                       (3:1).
P-16-0026...........................       4/11/2016        4/3/2016  (G) Amine functional epoxy, organic acid
                                                                       salt.
P-16-0100...........................        4/5/2016       3/23/2016  (G) Substituted heteropolycyclic derivs.
P-16-0107...........................       4/14/2016       3/27/2016  (G) Aromatic polycarboxylic acid, polymer
                                                                       with alkyldiol, alkylidioic acid,
                                                                       aromatic polyisocyanate, substituted
                                                                       alkyldiol, compd. with alkylamine.
P-16-0108...........................       4/28/2016       3/17/2016  (G) Carbonic acid, polymer with, 5-
                                                                       isocyanato-1-(isocyanatomethyl)- 1,3,3-
                                                                       trimethylcyclohexane, 2-hydroxyethyl
                                                                       acrylate-blocked.
P-16-0115...........................        4/6/2016       3/27/2016  (G) 2-propanediol, polymer with 2-
                                                                       ethyloxirane, oxirane and cycloaliphatic
                                                                       anhydride, polymer with 2,2???-[(1-
                                                                       methylethylidene)bis(4,1-
                                                                       phenyleneoxymethylene)]bis[oxirane].
P-16-0121...........................       4/18/2016       4/13/2016  (G) Acrylic acid polymer with polyethylene
                                                                       glycol.
P-16-0142...........................       4/26/2016       4/20/2016  (G) Amine salted polyacrylate.
P-16-0149...........................       4/18/2016       4/15/2016  (G) 2-alkenoic acid, alkyl ester, polymer
                                                                       with ethenyl benzene, alkyl 2-alky
                                                                       alkenoate and alkene carboxylic acid.
P-16-0159...........................       4/25/2016       3/31/2016  (G) Hexasodium 5-{4-[3-(8-benzoylamino-1-
                                                                       hydroxy-3,6-disulfonatonaphthalene-2-
                                                                       yldiazenyl)-4-sulfonatoanilino]-6-(2-
                                                                       sulfonatoethylamino)-1,3,5-triazine-2-
                                                                       ylamino{time} benzene-1,3-dicarboxylate.
P-16-0174...........................       4/29/2016       4/19/2016  (S) Butanedioic acid, 2-methylene-,
                                                                       telomer with phosphinic acid and sodium 4-
                                                                       ethenylbenzenesulfonate (1:1), sodium
                                                                       salt.
P-16-0175...........................       4/28/2016       4/18/2016  (S) Naphthalene, eicosyl-.
----------------------------------------------------------------------------------------------------------------


    Authority: 15 U.S.C. 2601 et seq.

    Dated: May 25, 2016.
Pamela Myrick,
Acting Director, Information Management Division, Office of Pollution 
Prevention and Toxics.
[FR Doc. 2016-13028 Filed 6-1-16; 8:45 am]
 BILLING CODE 6560-50-P


