
[Federal Register Volume 78, Number 56 (Friday, March 22, 2013)]
[Notices]
[Pages 17656-17660]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2013-06684]


=======================================================================
-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OPPT-2013-0127; FRL-9380-1]


Certain New Chemicals; Receipt and Status Information

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: The Toxic Substances Control Act (TSCA) requires any person 
who intends to manufacture (defined by statute to include import) a new 
chemical (i.e., a chemical not on the TSCA Chemical Substances 
Inventory (TSCA Inventory)) to notify EPA and comply with the statutory 
provisions pertaining to the manufacture of new chemicals. In addition 
under TSCA, EPA is required to publish in the Federal Register a notice 
of receipt of a premanufacture notice (PMN) or an application for a 
test marketing exemption (TME), and to publish in the Federal Register 
periodic status reports on the new chemicals under review and the 
receipt of notices of commencement (NOC) to manufacture those 
chemicals. This document, which covers the period from January 14, 2013 
to February 8, 2013, and provides the required notice and status 
report, consists of the PMNs and TMEs, both pending or expired, and the 
NOC to manufacture a new chemical that the Agency has received under 
TSCA section 5 during this time period.

DATES: Comments identified by the specific PMN number or TME number, 
must be received on or before April 22, 2013.

ADDRESSES: Submit your comments, identified by docket identification 
(ID) number EPA-HQ-OPPT-2013-[insert Docket ID no.], and the specific 
PMN number or TME number for the chemical related to your comment, by 
one of the following methods:
     Federal eRulemaking Portal: http://www.regulations.gov. 
Follow the online instructions for submitting comments.
     Mail: Document Control Office (7407M), Office of Pollution 
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 
Pennsylvania Ave. NW., Washington, DC 20460-0001.
     Hand Delivery: OPPT Document Control Office (DCO), EPA 
East Bldg., Rm. 6428, 1201 Constitution Ave. NW., Washington, DC. The 
DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding 
legal holidays. The telephone number for the DCO is (202) 564-8930. 
Such deliveries are only accepted during the DCO's normal hours of 
operation, and special arrangements should be made for deliveries of 
boxed information.
    Instructions: EPA's policy is that all comments received will be 
included in the docket without change and may be made available online 
at http://www.regulations.gov, including any personal information 
provided, unless the comment includes information claimed to be 
Confidential Business Information (CBI) or other information whose 
disclosure is restricted by statute. Do not submit information that you 
consider to be CBI or otherwise protected through regulations.gov or 
email. The regulations.gov Web site is an ``anonymous access'' system, 
which means EPA will not know your identity or contact information 
unless you provide it in the body of your comment. If you send an email 
comment directly to EPA without going through regulations.gov, your 
email address will be automatically captured and included as part of 
the comment that is placed in the docket and made available on the 
Internet. If you submit an electronic comment, EPA recommends that you 
include your name and other contact information in the body of your 
comment and with any disk or CD-ROM you submit. If EPA cannot read your 
comment due to technical difficulties and cannot contact you for 
clarification, EPA may not be able to consider your comment. Electronic 
files should avoid the use of special characters, any form of 
encryption, and be free of any defects or viruses.
    Docket: All documents in the docket are listed in the docket index 
available at http://www.regulations.gov. Although listed in the index, 
some information is not publicly available, e.g., CBI or other 
information whose disclosure is restricted by statute. Certain other 
material, such as copyrighted material, will be publicly available only 
in hard copy. Publicly available docket materials are available 
electronically at http://www.regulations.gov, or, if only available in 
hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA 
Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution 
Ave. NW., Washington, DC. The EPA/DC Public Reading Room hours of 
operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding 
legal holidays. The telephone number of the EPA/DC Public Reading Room 
is (202) 566-1744, and the telephone number for the OPPT Docket is 
(202) 566-0280. Docket visitors are required to show photographic 
identification, pass through a metal detector, and sign the EPA visitor 
log. All visitor bags are processed through an X-ray machine and 
subject to search. Visitors will be provided an EPA/DC badge that must 
be visible at all times in the building and returned upon departure.

FOR FURTHER INFORMATION CONTACT: For technical information contact: 
Bernice Mudd, Information Management Division (7408M), Office of 
Pollution Prevention and Toxics, Environmental Protection Agency, 1200 
Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number: 
(202) 564-8951; fax number: (202) 564-8955; email address: 
Mudd.Bernice@epa.gov.
    For general information contact: The TSCA-Hotline, ABVI-Goodwill, 
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 
554-1404; email address: TSCA-Hotline@epa.gov.

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this action apply to me?

    This action is directed to the public in general. As such, the 
Agency has not attempted to describe the specific entities that this 
action may apply to. Although others may be affected, this action 
applies directly to the submitter of the PMNs addressed in this action.

B. What should I consider as I prepare my comments for EPA?

    1. Submitting CBI. Do not submit this information to EPA through 
regulations.gov or email. Clearly mark the part or all of the 
information that you claim to be CBI. For CBI information in a disk or 
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as 
CBI and then identify electronically within the disk or CD-ROM the 
specific information that is claimed as CBI. In addition to one 
complete version of the comment that includes information claimed as 
CBI, a copy of the comment that does not contain the information 
claimed as CBI must be submitted for inclusion in the public docket. 
Information so marked will not be disclosed except in accordance with 
procedures set forth in 40 CFR part 2.
    2. Tips for preparing your comments. When submitting comments, 
remember to:

[[Page 17657]]

    i. Identify the document by docket ID number and other identifying 
information (subject heading, Federal Register date and page number).
    ii. Follow directions. The Agency may ask you to respond to 
specific questions or organize comments by referencing a Code of 
Federal Regulations (CFR) part or section number.
    iii. Explain why you agree or disagree; suggest alternatives and 
substitute language for your requested changes.
    iv. Describe any assumptions and provide any technical information 
and/or data that you used.
    v. If you estimate potential costs or burdens, explain how you 
arrived at your estimate in sufficient detail to allow for it to be 
reproduced.
    vi. Provide specific examples to illustrate your concerns and 
suggest alternatives.
    vii. Explain your views as clearly as possible, avoiding the use of 
profanity or personal threats.
    viii. Make sure to submit your comments by the comment period 
deadline identified.

II. Why is EPA taking this action?

    EPA classifies a chemical substance as either an ``existing'' 
chemical or a ``new'' chemical. Any chemical substance that is not on 
EPA's TSCA Inventory is classified as a ``new chemical,'' while those 
that are on the TSCA Inventory are classified as an ``existing 
chemical.'' For more information about the TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to 
manufacture or import a new chemical substance for a non-exempt 
commercial purpose is required by TSCA section 5 to provide EPA with a 
PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes 
EPA to allow persons, upon application, to manufacture (includes 
import) or process a new chemical substance, or a chemical substance 
subject to a significant new use rule (SNUR) issued under TSCA section 
5(a), for ``test marketing'' purposes, which is referred to as a test 
marketing exemption, or TME. For more information about the 
requirements applicable to a new chemical go to: http://www.epa.gov/oppt/newchems.
    Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish 
in the Federal Register a notice of receipt of a PMN or an application 
for a TME and to publish in the Federal Register periodic status 
reports on the new chemicals under review and the receipt of NOCs to 
manufacture those chemicals. This status report, which covers the 
period from January 14, 2013 to February 8, 2013, consists of the PMNs 
and TMEs, both pending or expired, and the NOCs to manufacture a new 
chemical that the Agency has received under TSCA section 5 during this 
time period.

III. Receipt and Status Reports

    In Table I. of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the PMNs 
received by EPA during this period: The EPA case number assigned to the 
PMN, the date the PMN was received by EPA, the projected end date for 
EPA's review of the PMN, the submitting manufacturer/importer, the 
potential uses identified by the manufacturer/importer in the PMN, and 
the chemical identity.

                                Table I--33 PMNs Received From 1/14/13 to 2/08/13
----------------------------------------------------------------------------------------------------------------
                                      Projected
       Case No.           Received    notice end    Manufacturer/            Use                  Chemical
                            date         date         importer
----------------------------------------------------------------------------------------------------------------
P-13-0216.............    1/14/2013    4/13/2013  CBI.............  (G) Electrographic     (G) Polycarboxylic
                                                                     toner.                 acids, polymer with
                                                                                            polyols.
P-13-0217.............    1/14/2013    4/13/2013  CBI.............  (S) Extreme pressure,  (G) Antimony
                                                                     anti-wear additive     tris(dialkyldithioca
                                                                     for greases and oils.  rbamate).
P-13-0218.............    1/15/2013    4/14/2013  Mitsui Chemicals  (G) Substance for      (G) Alkenyl
                                                   America, Inc.     molding automotive     substituted
                                                                     components.            carbopolycycle,
                                                                                            polymer with alkene,
                                                                                            alkylidene
                                                                                            substituted
                                                                                            carbopolycycle and
                                                                                            alkene.
P-13-0220.............    1/15/2013    4/14/2013  Teknor Apex.....  (S) Plasticizer for    (G) Aliphatic
                                                                     pvc resin.             polyester.
P-13-0221.............    1/15/2013    4/14/2013  CBI.............  (G) Manufacturing      (S) Copper,
                                                                     process aid.           chloro[tris(2-
                                                                                            chloroethyl)
                                                                                            phosphite-
                                                                                           P]-.
P-13-0222.............    1/15/2013    4/14/2013  CBI.............  (S) Refinery           (G) Synthetic crude
                                                                     feedstock.             oil.
P-13-0223.............    1/16/2013    4/15/2013  CBI.............  (G) Photoinitiator     (G) Acetophenone
                                                                     for coatings and       derivative.
                                                                     inks.
P-13-0224.............    1/16/2013    4/15/2013  CBI.............  (G) Stabilizer for     (G) Organo barium
                                                                     thermoplastics.        salts.
P-13-0225.............    1/16/2013    4/15/2013  CBI.............  (G) Stabilizer for     (G) Organo zinc
                                                                     thermoplastics.        salts.
P-13-0226.............    1/16/2013    4/15/2013  CBI.............  (G) Destructive use..  (G) Oranometallic
                                                                                            polymerization
                                                                                            catalyst
                                                                                            intermediate.
P-13-0227.............    1/16/2013    4/15/2013  International     (S) Fragrance          (S) 2-butenoic acid,
                                                   Flavors &         ingredient for use     1-ethyl-2-
                                                   Fragrances, Inc.  in fragrances for      methylpropyl ester,
                                                                     soaps, detergent,      (2E)-.
                                                                     cleaners and other
                                                                     household products.
P-13-0228.............    1/17/2013    4/16/2013  CBI.............  (G) Open, non-         (G) Modified
                                                                     dispersive.            brominated
                                                                                            isobutylene-isoprene
                                                                                            copolymer.
P-13-0229.............    1/17/2013    4/16/2013  Kimberly-Clark    (G) Binder for fiber   (G) Acrylic
                                                   Corporation.      (open, non-            copolymer.
                                                                     dispersive use).
P-13-0230.............    1/17/2013    4/16/2013  CBI.............  (G) Resin for          (G) Alkylmethacrylate
                                                                     waterborne inks.       polymer, with alkyl
                                                                                            acrylate, aromatic
                                                                                            vinyl monomer and
                                                                                            alkyl acrylate--
                                                                                            ammonium persulfate
                                                                                            initiated.
P-13-0231.............    1/17/2013    4/16/2013  CBI.............  (G) Resin for          (G) Alkylmethacrylate
                                                                     waterborne inks.       polymer, with alkyl
                                                                                            acrylate, aromatic
                                                                                            vinyl monomer and
                                                                                            alkyl acrylate.

[[Page 17658]]

 
P-13-0232.............    1/18/2013    4/17/2013  H.B. Fuller       (G) Industrial         (G)
                                                   Company.          adhesive.              Benzenedicarboxylic
                                                                                            acid, polymer with
                                                                                            substituted
                                                                                            alkanediol,
                                                                                            dodecanedioic acid,
                                                                                            1,2-ethanediol,
                                                                                            alkanediol acid,
                                                                                            alkanediol,.alpha.-
                                                                                            hydro-.omega.-
                                                                                            hydroxypoly[oxyalkan
                                                                                            ediyl], 1,3-
                                                                                            isobenzofurandione,
                                                                                            methylene diphneyl
                                                                                            diisocyanate, 2-
                                                                                            oxepanone, 2,2'-
                                                                                            oxybis[ethanol] and
                                                                                            polymethylene
                                                                                            polyphenylene
                                                                                            isocyanate.
P-13-0233.............    1/18/2013    4/17/2013  Henkel            (S) Site limited       (S) Hexanedioicacid,
                                                   Corporation.      initator in            2,5-dibromo-,
                                                                     polymerization         diethyl ester (6ci,
                                                                     reactions.             7ci, 8ci, 9ci).
P-13-0234.............    1/18/2013    4/17/2013  CBI.............  (G) Polymer additive.  (G) Substituted
                                                                                            hexitol.
P-13-0235.............    1/18/2013    4/17/2013  Georgia-Pacific   (G) Emulsifier.......  (S) Fatty acids, tall-
                                                   Chemicals LLC.                           oil, reaction
                                                                                            products with
                                                                                            diethylenetriamine,
                                                                                            maleic anhydride and
                                                                                            soybean oil.
P-13-0236.............    1/22/2013    4/21/2013  CBI.............  (G) Pigment            (G) Vegetable-oil
                                                                     dispersant.            fatty acids,
                                                                                            conjucted, anhydride
                                                                                            ester, reaction
                                                                                            products with
                                                                                            substituted amine,
                                                                                            tall-oil acids
                                                                                            anhydride ester and
                                                                                            substituted amine.
P-13-0237.............    1/22/2013    4/21/2013  Tire Recycling &  (S) Raw feed stock     (S) Tires, wastes,
                                                   Processing LLC.   for refineries.        pyrolyzed, C2	14 oil
                                                                                            fraction.
P-13-0238.............    1/23/2013    4/22/2013  CBI.............  (G) Catalyst.........  (G) Tertiary amine
                                                                                            catalyst.
P-13-0239.............    1/24/2013    4/23/2013  Sika Corporation  (G) Roof membrane      (G) Amine adduct.
                                                                     hardener.
P-13-0240.............    1/25/2013    4/24/2013  Carboline         (G) Coating component  (G) Alkyl ketimine;
                                                   Company.                                 alpha-hydroxyamine;
                                                                                            alkyl ketimine.
P-13-0241.............    1/24/2013    4/23/2013  Marshallton       (G) Waste remediation  (G) Alkyl guanidine
                                                   Research                                 hydrochloride.
                                                   Laboratories,
                                                   Inc.
P-13-0242.............    1/29/2013    4/28/2013  Hi-tech Color,    (S) Pigment            (S) 2-propenoic acid,
                                                   Inc..             dispersant for water   2-methyl-, polymer
                                                                     base inks.             with cyclohexyl 2-
                                                                                            methyl-2-propenoate,
                                                                                            methyl 2-methyl-2-
                                                                                            propenoate and
                                                                                            phenylmethyl 2-
                                                                                            methyl-2-propenoate,
                                                                                            2,2'-(1,2-
                                                                                            diazenediyl)bis[4-
                                                                                            methoxy-2,4-
                                                                                            dimethylpentanenitri
                                                                                            le]-initiated.
P-13-0243.............    1/29/2013    4/28/2013  Hi-tech Color,    (G) Back coating       (G) Siloxanes and
                                                   Inc..             agent.                 silicones, di-alkyl,
                                                                                            3-aminopropyl group-
                                                                                            terminated, polymer
                                                                                            with 1,3-alkanediol,
                                                                                            substituted
                                                                                            diisocyanates.
P-13-0244.............    1/30/2013    4/29/2013  CBI.............  (S) Polymeric binder   (G) Aliphatic
                                                                     for coatings.          polyurethane.
P-13-0245.............    1/30/2013    4/29/2013  Cytec Industries  (S) Coating resin....  (G) Substituted
                                                   Inc..                                    alkanoic acid,
                                                                                            polymers with
                                                                                            substituted
                                                                                            alkylamide,
                                                                                            substituted
                                                                                            carbomonocycle,
                                                                                            substituted
                                                                                            alkanoates.
P-13-0246.............    1/31/2013    4/30/2013  Umicore USA Inc.  (G) Additive/reactant  (G) Cobalt based
                                                                                            polymer with fatty
                                                                                            acids, and polyol.
P-13-0247.............     2/1/2013     5/1/2013  CBI.............  (G) Component of       (G) Dicarboxylic
                                                                     footwear.              acid, polymer with
                                                                                            dicarboxylic acid,
                                                                                            substituted
                                                                                            carbomonocycle and
                                                                                            alkanediol.
P-13-0248.............     2/1/2013     5/1/2013  CBI.............  (G) Electrolyte......  (G) Lithium salt of
                                                                                            substituted imide.
P-13-0249.............     2/1/2013     5/1/2013  The Lewis         (S) Corrosion          (G) Dihydroxypropyl
                                                   Chemical          inhibitor for          PEG linoleamonium
                                                   Company.          oilfield               chloride.
                                                                     applications.
----------------------------------------------------------------------------------------------------------------

    In Table II. of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the TMEs 
received by EPA during this period: The EPA case number assigned to the 
TME, the date the TME was received by EPA, the projected end date for 
EPA's review of the TME, the submitting manufacturer/importer, the 
potential uses identified by the manufacturer/importer in the TME, and 
the chemical identity.

[[Page 17659]]



                                Table II--2 TMEs Received From 1/14/13 to 2/08/13
----------------------------------------------------------------------------------------------------------------
                                    Projected
      Case No.          Received    notice end     Manufacturer/             Use                 Chemical
                          date         date           importer
----------------------------------------------------------------------------------------------------------------
T-13-0006...........    1/30/2013    3/15/2013  Cytec Industries     (S) Coating resin.  (G) Substituted
                                                 Inc..                                    alkanoic acid, polymer
                                                                                          with substituted
                                                                                          alkylamide,
                                                                                          substituted
                                                                                          carbomonocycle,
                                                                                          substituted
                                                                                          alkanoates.
T-13-0007...........    1/31/2013    3/16/2013  H.B. Fuller Company  (G) Industrial      (G) Fatty acids, c18-
                                                                      adhesive.           unsaturated dimers,
                                                                                          polymers with alkane
                                                                                          acid, 1,6-hexanediol,
                                                                                          1,1'-methylenebis[4-
                                                                                          isocyanatobenzene] and
                                                                                          neopentyl glycol.
----------------------------------------------------------------------------------------------------------------

    In Table III. of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the NOCs 
received by EPA during this period: The EPA case number assigned to the 
NOC, the date the NOC was received by EPA, the projected end date for 
EPA's review of the NOC, and chemical identity.

                               Table III--29 NOCs Received From 1/14/13 to 2/08/13
----------------------------------------------------------------------------------------------------------------
                                                         Commencement
               Case No.                  Received date    notice end                    Chemical
                                                             date
----------------------------------------------------------------------------------------------------------------
P-07-0122.............................       1/25/2013      12/27/2012  (G) Glycerol fatty acid ester.
P-08-0304.............................       1/15/2013      12/17/2012  (G) Substituted carbocycle, [(N-
                                                                         carbocycleamino)-heterocycle-yl]-bis-.
P-10-0181.............................       1/16/2013       1/10/2013  (G) Phenyl glycidyl ether derivative.
P-11-0060.............................       1/29/2013       1/16/2013  (G) Methylenebis, polymer with
                                                                         alkanedioic acid, alkylene glycols,
                                                                         alkoxylated alkanepolyol and
                                                                         substituted trialkoxysilane.
P-11-0232.............................       1/30/2013       1/17/2013  (G) Acryloxy functional siloxane.
P-12-0028.............................       1/21/2013       1/17/2013  (S) D-glucopyranose, oligomeric, C10-16-
                                                                         alkyl glycosides, 2,3-dihydroxypropyl
                                                                         ethers, hydrogen succinates, sodium
                                                                         salts, polymers with 1,3-dichloro-2-
                                                                         propanol.
P-12-0062.............................       1/30/2013       1/17/2013  (G) Dimethylalkoxylated
                                                                         polydimethylsiloxane and methoxy
                                                                         functional silica.
P-12-0224.............................       1/30/2013       1/25/2013  (G) Ester.
P-12-0240.............................       1/11/2013      12/17/2012  (G) Ammonium molybdenum tungsten nickel
                                                                         hydroxide maleate.
P-12-0257.............................       1/16/2013        1/1/2013  (G) Brominated by-product stream.
P-12-0260.............................       1/30/2013       1/20/2013  (G) Brominated aliphatic alcohol.
P-12-0312.............................       1/21/2013        1/3/2013  (S) Aluminoxanes, me.
P-12-0332.............................       1/30/2013       1/17/2013  (G) Brominated distillation bottoms.
P-12-0448.............................       1/22/2013        1/7/2013  (S) Zirconium, dichloro[[(1,2,3,4,5-
                                                                         .eta.)-3-(1,1-dimethylethyl)-2,4-
                                                                         cyclopentadien-1-ylidene] (1-
                                                                         methylethylidene) [(1,2,3,3a,7a-.eta.)-
                                                                         2-methyl-1H-inden-1-ylidene]]-.
P-12-0464.............................       1/14/2013      12/22/2012  (S) Iodonium, diphenyl-, 4,4'-di-C10-13
                                                                         alkyl derivates., (oc-6-11)-
                                                                         hexafluoroantimonates(1-).
P-12-0475.............................       1/31/2013       1/30/2013  (S) Butanoic acid, 2-methyl-5-(1-
                                                                         methylethyl)cyclopentyl ester.
P-12-0492.............................       1/21/2013      12/22/2012  (G) Alkylphenol.
P-12-0559.............................       1/22/2013       1/17/2013  (G) Acrylic silane polymer.
P-12-0560.............................       1/11/2013      12/19/2012  (S) Slimes and sludges, aluminum and
                                                                         iron casting, wastewater treatment,
                                                                         solid waste.
P-12-0567.............................       1/31/2013       1/29/2013  (G) Polyethylene glycol, polymer with
                                                                         diisocyanate, alkanol-blocked.
P-12-0571.............................       1/16/2013       1/14/2013  (G) Halogenated diketopyrrolopyrrol
                                                                         derivative.
P-13-0001.............................        2/1/2013       1/29/2013  (G) Vegetable-oil fatty acids,
                                                                         conjugated, polymers with substituted
                                                                         propanoic acid, polyol, anhydride,
                                                                         polyethylene glycol, propylene glycol
                                                                         and trimethylolpropane.
P-13-0003.............................       1/15/2013       1/14/2013  (G) Castor oil, polymer with glycol and
                                                                         phthalic anhydride.
P-13-0014.............................        2/1/2013       1/29/2013  (G) Substituted carboxylic acid,
                                                                         compound with hetermonocyclic polymer
                                                                         with substituted carboxylic acid,
                                                                         substituted heteromonocycle and
                                                                         heteromonocycle.
P-13-0016.............................       1/21/2013       1/10/2013  (S) 1,4-butanediol, polymer with 1,4-
                                                                         diisocyanatobenzene and -hydro-
                                                                         hydroxypoly(oxy-1,4-butanediyl).
P-13-0025.............................       1/30/2013        1/9/2013  (G) Acid modified petroleum residuum.
P-13-0026.............................       1/30/2013        1/9/2013  (G) Acid modified petroleum residuum.
P-13-0027.............................       1/30/2013        1/9/2013  (G) Acid modified petroleum residuum.
P-13-0029.............................       1/21/2013       1/10/2013  (S) Automotive metal recovery.
----------------------------------------------------------------------------------------------------------------

    If you are interested in information that is not included in these 
tables, you may contact EPA as described in Unit II. to access 
additional non-CBI information that may be available.

List of Subjects

    Environmental protection, Chemicals, Hazardous substances, Imports, 
Notice of commencement, Premanufacturer, Reporting and recordkeeping 
requirements, Test marketing exemptions.


[[Page 17660]]


    Dated: March 4, 2013.
Chandler Sirmons,
Acting Director, Information Management Division, Office of Pollution 
Prevention and Toxics.
[FR Doc. 2013-06684 Filed 3-21-13; 8:45 am]
BILLING CODE 6560-50-P


