
[Federal Register Volume 77, Number 247 (Wednesday, December 26, 2012)]
[Notices]
[Pages 76029-76034]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2012-31063]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OPPT-2012-0881; FRL-9373-1]


Certain New Chemicals; Receipt and Status Information

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: The Toxic Substances Control Act (TSCA) requires any person 
who intends to manufacture (defined by statute to include import) a new 
chemical (i.e., a chemical not on the TSCA Chemical Substances 
Inventory (TSCA Inventory)) to notify EPA and comply with the statutory 
provisions pertaining to the manufacture of new chemicals. In addition 
under TSCA, EPA is required to publish in the Federal Register a notice 
of receipt of a premanufacture notice (PMN) or an application for a 
test marketing exemption (TME), and to publish in the Federal Register 
periodic status reports on the new chemicals under review and the 
receipt of notices of commencement (NOC) to manufacture those 
chemicals. This document, which covers the period from November 1, 2012 
to November 30, 2012, and provides the required notice and status 
report, consists of the PMNs and TMEs, both pending or expired, and the 
NOC to manufacture a new chemical that the Agency has received under 
TSCA section 5 during this time period.

DATES: Comments identified by the specific PMN number or TME number, 
must be received on or before January 25, 2013.

ADDRESSES: Submit your comments, identified by docket identification 
(ID) number EPA-HQ-OPPT-2012-0881, and the specific PMN number or TME 
number for the chemical related to your comment, by one of the 
following methods:
     Federal eRulemaking Portal: http://www.regulations.gov. 
Follow the online instructions for submitting comments.
     Mail: Document Control Office (7407M), Office of Pollution 
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 
Pennsylvania Ave., NW., Washington, DC 20460-0001.
     Hand Delivery: OPPT Document Control Office (DCO), EPA 
East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. The 
DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding 
legal holidays. The telephone number for the DCO is (202) 564-8930. 
Such deliveries are only accepted during the DCO's normal hours of 
operation, and special arrangements should be made for deliveries of 
boxed information.
    Instructions: EPA's policy is that all comments received will be 
included in the docket without change and may be made available online 
at http://www.regulations.gov, including any personal information 
provided, unless the comment includes information claimed to be 
Confidential Business Information (CBI) or other information whose 
disclosure is restricted by statute. Do not submit information that you 
consider to be CBI or otherwise protected through regulations.gov or 
email. The regulations.gov Web site is an ``anonymous access'' system, 
which means EPA will not know your identity or contact information 
unless you provide it in the body of your comment. If you send an email 
comment directly to EPA without going through regulations.gov, your 
email address will be automatically captured and included as part of 
the comment that is placed in the docket and made available on the 
Internet. If you submit an electronic comment, EPA recommends that you 
include your name and other contact information in the body of your 
comment and with any disk or CD-ROM you submit. If EPA cannot read your 
comment due to technical difficulties and cannot contact you for 
clarification, EPA may not be able to consider your comment. Electronic 
files should avoid the use of special characters, any form of 
encryption, and be free of any defects or viruses.
    Docket: All documents in the docket are listed in the docket index 
available at http://www.regulations.gov. Although listed in the index, 
some information is not publicly available, e.g., CBI or other 
information whose disclosure is restricted by statute. Certain other 
material, such as copyrighted material, will be publicly available only 
in hard copy. Publicly available docket materials are available 
electronically at http://www.regulations.gov, or, if only available in 
hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA 
Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution 
Ave., NW., Washington, DC. The EPA/DC Public Reading Room hours of 
operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding 
legal holidays. The telephone number of the EPA/DC Public Reading Room 
is (202) 566-1744, and the telephone number for the OPPT Docket is 
(202) 566-0280. Docket visitors are required to show photographic 
identification, pass through a metal detector, and sign the EPA visitor 
log. All visitor bags are processed through an X-ray machine and 
subject to search. Visitors will be provided an EPA/DC badge that must 
be visible at all times in the building and returned upon departure.

FOR FURTHER INFORMATION CONTACT: For technical information contact: 
Bernice Mudd, Information Management Division (7407M), Office of 
Pollution Prevention and Toxics, Environmental Protection Agency, 1200 
Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: 
(202) 564-8955; fax number: (202) 564-8951; email address: 
mudd.bernice@epa.gov.
    For general information contact: The TSCA-Hotline, ABVI-Goodwill, 
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 
554-1404; email address: TSCA-Hotline@epa.gov.

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this action apply to me?

    This action is directed to the public in general. As such, the 
Agency has not attempted to describe the specific entities that this 
action may apply to. Although others may be affected, this action 
applies directly to the submitter of the PMNs addressed in this action.

B. What should I consider as I prepare my comments for EPA?

    1. Submitting CBI. Do not submit this information to EPA through 
regulations.gov or email. Clearly mark the part or all of the 
information that you claim to be CBI. For CBI information in a disk or 
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as 
CBI and then identify electronically within the disk or CD-ROM the 
specific information that is claimed as CBI. In addition to one 
complete version of the comment that includes information claimed as 
CBI, a copy of the comment that does not contain the information 
claimed as CBI must be submitted for inclusion in the public docket. 
Information so marked will not be disclosed except in accordance with 
procedures set forth in 40 CFR part 2.
    2. Tips for preparing your comments. When submitting comments, 
remember to:
    i. Identify the document by docket ID number and other identifying 
information (subject heading, Federal Register date and page number).

[[Page 76030]]

    ii. Follow directions. The Agency may ask you to respond to 
specific questions or organize comments by referencing a Code of 
Federal Regulations (CFR) part or section number.
    iii. Explain why you agree or disagree; suggest alternatives and 
substitute language for your requested changes.
    iv. Describe any assumptions and provide any technical information 
and/or data that you used.
    v. If you estimate potential costs or burdens, explain how you 
arrived at your estimate in sufficient detail to allow for it to be 
reproduced.
    vi. Provide specific examples to illustrate your concerns and 
suggest alternatives.
    vii. Explain your views as clearly as possible, avoiding the use of 
profanity or personal threats.
    viii. Make sure to submit your comments by the comment period 
deadline identified.

II. Why is EPA taking this action?

    EPA classifies a chemical substance as either an ``existing'' 
chemical or a ``new'' chemical. Any chemical substance that is not on 
EPA's TSCA Inventory is classified as a ``new chemical,'' while those 
that are on the TSCA Inventory are classified as an ``existing 
chemical.'' For more information about the TSCA Inventory go to http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to 
manufacture or import a new chemical substance for a non-exempt 
commercial purpose is required by TSCA section 5 to provide EPA with a 
PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes 
EPA to allow persons, upon application, to manufacture (includes 
import) or process a new chemical substance, or a chemical substance 
subject to a significant new use rule (SNUR) issued under TSCA section 
5(a), for ``test marketing'' purposes, which is referred to as a test 
marketing exemption, or TME. For more information about the 
requirements applicable to a new chemical go to: http://www.epa.gov/oppt/newchems.
    Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish 
in the Federal Register a notice of receipt of a PMN or an application 
for a TME and to publish in the Federal Register periodic status 
reports on the new chemicals under review and the receipt of NOCs to 
manufacture those chemicals. This status report, which covers the 
period from November 1, 2012 to November 30, 2012, consists of the PMNs 
and TMEs, both pending or expired, and the NOCs to manufacture a new 
chemical that the Agency has received under TSCA section 5 during this 
time period.

III. Receipt and Status Reports

    In Table I. of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the PMNs 
received by EPA during this period: The EPA case number assigned to the 
PMN, the date the PMN was received by EPA, the projected end date for 
EPA's review of the PMN, the submitting manufacturer/importer, the 
potential uses identified by the manufacturer/importer in the PMN, and 
the chemical identity.

                              Table I--55 PMNs Received From 11/1/2012 to 11/30/12
----------------------------------------------------------------------------------------------------------------
                                     Projected
       Case No.          Received    notice end     Manufacturer/            Use                 Chemical
                           date         date          importer
----------------------------------------------------------------------------------------------------------------
P-13-0082............    11/2/2012    1/30/2013  Henkel Corp.......  (S) Hotmelt         (G) Acrylic modified
                                                                      adhesive for        polyether-ester
                                                                      panel lamination    polyurethane
                                                                      and other           prepolymer.
                                                                      assemblies.
P-13-0083............    11/1/2012    1/29/2013  CBI...............  (S) Coatings        (G) Epoxysilane
                                                                      additive.           homopolymer.
P-13-0090............    11/1/2012    1/29/2013  Cytec Industries,   (G) Resin for non-  (G) Alkenenitrile,
                                                  Inc..               dispersive use.     polymer with
                                                                                          alkadiene, substituted
                                                                                          alkyl-terminated,
                                                                                          polymers with
                                                                                          substituted
                                                                                          carbonomocycles,
                                                                                          alkoxy-terminated-
                                                                                          substituted alkyl-
                                                                                          alkadiene polymer,
                                                                                          substituted
                                                                                          carbomoncycle and
                                                                                          halogen substituted
                                                                                          carbomonocycle.
P-13-0091............    11/5/2012     2/2/2013  Cray Valley USA,    (G) Additive for    (G) Siloxane functional
                                                  LLC.                rubber to improve   polybutadiene polymer.
                                                                      properties.
P-13-0092............    11/6/2012     2/3/2013  CBI...............  (G) Adhesive for    (G) Latex polymer.
                                                                      electrical
                                                                      industry use.
P-13-0093............    11/8/2012     2/5/2013  The Goodyear Tire   (S) Precursor to    (S) Neodymium,
                                                  & Rubber Co.        polymerization      butadiene iso-bu
                                                  Department 100D.    catalyst.           neodecanoate
                                                                                          complexes.
P-13-0094............    11/6/2012     2/3/2013  CBI...............  (G) Additive for    (G) Acrylic ester
                                                                      adhesives,          functionalized
                                                                      pottings and        polyether polymer.
                                                                      sealants.
P-13-0095............    11/6/2012     2/3/2013  Gelest, Inc.......  (S) Further         (S) Silane,
                                                                      purified at one     bicyclo[2.2.1]hept-2-
                                                                      site; further       yldiethoxymethyl-
                                                                      purified material
                                                                      packaged and sent
                                                                      to end use for
                                                                      use in CVD LOWK
                                                                      dielectric
                                                                      barrier in
                                                                      microelectronic
                                                                      application..
P-13-0096............   11/12/2012     2/9/2013  Cytec Industries,   (G) Coating resin.  (G) Alkenoic acid,
                                                  Inc..                                   reaction product with
                                                                                          alkylpolyol, polymers
                                                                                          with substituted
                                                                                          heteromonocycle.

[[Page 76031]]

 
P-13-0097............    11/9/2012     2/6/2013  Shin ETSU Microsi.  (G) Non             (G) Vinyl chloride
                                                                      combustible         emulsion (acrylic
                                                                      coating for non     group emulsion type).
                                                                      woven fabric for
                                                                      automobile air
                                                                      filters and
                                                                      carpet flooring
                                                                      materials.
P-13-0098............   11/12/2012     2/9/2013  CBI...............  (G) An open, non-   (G) Modified
                                                                      dispersive use.     polyarylamide salt.
P-13-0099............   11/13/2012    2/10/2013  H.B. Fuller         (G) Industrial      (G) 1,4-
                                                  Company.            adhesive.           benzenedicarboxylic
                                                                                          acid, polymer with 2,2-
                                                                                          dimethyl-1,3-
                                                                                          propanediol, alkane
                                                                                          diacid, 1,2-
                                                                                          ethanediol,
                                                                                          hexanedioic acid,
                                                                                          alkanediol, .alpha.-
                                                                                          hydro-.omega.-
                                                                                          hydroxypoly[oxy(methyl-
                                                                                          1,2-ethanediyl)], 1,3-
                                                                                          isobenzofurandione,
                                                                                          1,1'-methylenebis[4-
                                                                                          isocyanatobenzene], 2-
                                                                                          oxepanone and 2,2'-
                                                                                          oxybis[ethanol].
P-13-0100............   11/13/2012    2/10/2013  H.B. Fuller         (G) Industrial      (G) Alkane diacid,
                                                  Company.            adhesive.           polymer with
                                                                                          hexanedioic acid,
                                                                                          alkanediol, .alpha.-
                                                                                          hydro-.omega.-
                                                                                          hydroxypoly[oxy(methyl-
                                                                                          1,2-ethanediyl)], 1,3-
                                                                                          isobenzofurandione,
                                                                                          1,1'-methylenebis[4-
                                                                                          isocyanatobenzene], 2-
                                                                                          oxepanone and 2,2'-
                                                                                          oxybis[ethanol].
P-13-0101............   11/13/2012    2/10/2013  H.B. Fuller         (G) Industrial      (G) 1,3-
                                                  Company.            adhesive.           benzenedicarboxylic
                                                                                          acid, polymer with 1,4-
                                                                                          benzenedicarboxylic
                                                                                          acid, alkane diacid,
                                                                                          1,2-ethanediol,
                                                                                          hexanedioic acid,
                                                                                          alkanediol, .alpha.-
                                                                                          hydro-.omega.-
                                                                                          hydroxypoly[oxy(methyl-
                                                                                          1,2-ethanediyl)], 1,3-
                                                                                          isobenzofurandione,
                                                                                          1,1'-methylenebis[4-
                                                                                          isocyanatobenzene], 2-
                                                                                          oxepanone and 2,2'-
                                                                                          oxybis[ethanol].
P-13-0102............   11/13/2012    2/10/2013  H.B. Fuller         (G) Industrial      (G) Alkane diacid,
                                                  Company.            adhesive.           polymer with
                                                                                          hexanedioic acid,
                                                                                          alkanediol, .alpha.-
                                                                                          hydro-.omega.-
                                                                                          hydroxypoly[oxy(methyl-
                                                                                          1,2-ethanediyl)], 1,1'-
                                                                                          methylenebis[4-
                                                                                          isocyanatobenzene], 2-
                                                                                          oxepanone and
                                                                                          .alpha.,.alpha.',.alph
                                                                                          a.-1.
P-13-0103............   11/13/2012    2/10/2013  H.B. Fuller         (G) Industrial      (G) Alkane diacid,
                                                  Company.            adhesive.           polymer with 2,2-
                                                                                          dimethyl-1,3-
                                                                                          propanediol, 1,2-
                                                                                          ethanediol,
                                                                                          hexanedioic acid,
                                                                                          alkanediol, .alpha.-
                                                                                          hydro-.omega.-
                                                                                          hydroxypoly[oxy(methyl-
                                                                                          1,2-ethanediyl)], 1,1'-
                                                                                          methylenebis[4-
                                                                                          isocyanatobenzene],
                                                                                          and.alpha.,.alpha.',.a
                                                                                          lpha.-1.
P-13-0104............   11/13/2012    2/10/2013  H.B. Fuller         (G) Industrial      (G) Alkane diacid,
                                                  Company.            adhesive.           polymer with 2,2-
                                                                                          dimethyl-1,3-
                                                                                          propanediol, 1,2-
                                                                                          ethanediol,
                                                                                          hexanedioic acid,
                                                                                          alkanediol, .alpha.-
                                                                                          hydro-.omega.-
                                                                                          hydroxypoly[oxy(methyl-
                                                                                          1,2-ethanediyl)], 1,3-
                                                                                          isobenzofurandione,
                                                                                          1,1'-methylenebis[4-
                                                                                          isocyanatobenzene],
                                                                                          and 2,2'-
                                                                                          oxybis[ethanol].
P-13-0105............   11/13/2012    2/10/2013  Sika Corporation..  (G) Latent          (G) Latent hardener for
                                                                      hardener for        polyurethane.
                                                                      polyurethane roof
                                                                      membrane.
P-13-0106............    11/9/2012     2/6/2013  The Goodyear Tire   (S) Precursor to    (G) Neodymium, Ziegler--
                                                  & Rubber Company.   polymerization      Natta preformed stage
                                                                      catalyst.           1 catalyst.
P-13-0107............   11/14/2012    2/11/2013  Trinity             (S) Flame           (S) Alkanes, C22	30-
                                                  Manufacturing,      retardant for       branched and linear,
                                                  Inc..               rubber products.    chloro.
P-13-0108............   11/14/2012    2/11/2013  CBI...............  (S) Feed for a      (S) Bromine,
                                                                      bromine recovery    manufacturer of, by-
                                                                      unit.               products from distant
                                                                                          residues.
P-13-0109............   11/14/2012    2/11/2013  Trinity             (S) Flame           (S) Alkanes, C24	28,
                                                  Manufacturing,      retardant in        chloro.
                                                  Inc..               rubber products;
                                                                      extreme pressure
                                                                      additive in
                                                                      lubricants.
P-13-0110............   11/14/2012    2/11/2013  CBI...............  (G) Additive,       (G) Hydroxyalkyl
                                                                      open, non-          methacrylate, reaction
                                                                      dispersive use.     product with cyclic
                                                                                          ether.
P-13-0111............   11/15/2012    2/12/2013  CBI...............  (G) Additive,       (G) Acrylfunctional
                                                                      open, non-          polysiloxane, reaction
                                                                      dispersive use.     product of alcohols
                                                                                          with isocyanates.
P-13-0112............   11/15/2012    2/12/2013  CBI...............  (G) Additive,       (G) Acrylfunctional
                                                                      open, non-          polysiloxane, reaction
                                                                      dispersive use.     product of alcohols
                                                                                          with isocyanates.
P-13-0113............   11/15/2012    2/12/2013  CBI...............  (G) Additive,       (G) Acrylfunctional
                                                                      open, non-          polysiloxane, reaction
                                                                      dispersive use.     product of alcohols
                                                                                          with isocyanates.

[[Page 76032]]

 
P-13-0114............   11/19/2012    2/16/2013  CBI...............  (S) Reactant/       (G) Sorbitan ester.
                                                                      intermediate for
                                                                      polymers and
                                                                      oligomers,
                                                                      polyesters, and
                                                                      other materials
                                                                      that might
                                                                      include personal
                                                                      care and
                                                                      pharmaceutical
                                                                      applications.
P-13-0115............   11/20/2012    2/17/2013  CBI...............  (G) Pigment         (G) Fatty acids of
                                                                      dispersant.         natural oils,
                                                                                          conjugated, maleated,
                                                                                          substituted
                                                                                          phenoxyalkyl ester.
P-13-0116............   11/20/2012    2/17/2013  CBI...............  (G) Pigment         (G) Fatty acids of
                                                                      dispersant.         natural oils,
                                                                                          conjugated, maleated,
                                                                                          substituted
                                                                                          phenoxyalkyl ester.
P-13-0117............   11/20/2012    2/17/2013  H.B. Fuller         (G) Industrial      (G) Vegetable oil,
                                                  Company.            adhesive.           polymer with
                                                                                          isocyanate.
P-13-0118............   11/20/2012    2/17/2013  CBI...............  (G) Industrial      (G) Vegetable oil,
                                                                      adhesive.           polymer with
                                                                                          isocyanate and
                                                                                          propanol, oxybis-.
P-13-0119............   11/20/2012    2/17/2013  CBI...............  (G) Polymer         (S) D-glucitol, 1,3:2,4-
                                                                      processing          bis-o-[(4-
                                                                      additive.           ethylphenyl)methylene]-
                                                                                          .
P-13-0120............   11/20/2012    2/17/2013  CBI...............  (S) Catalyst for    (G) Substituted
                                                                      use in              dimethyltin.
                                                                      polyurethane
                                                                      coatings.
P-13-0121............   11/20/2012    2/17/2013  CBI...............  (G) Polymeric       (G) Substituted
                                                                      colorant.           polymeric aromatic
                                                                                          amine azo colorant.
P-13-0122............   11/20/2012    2/17/2013  CBI...............  (G) Packaging       (G) Acetic acid ethenyl
                                                                      material.           ester, copolymer,
                                                                                          hydrolyzed.
P-13-0123............   11/20/2012    2/17/2013  CBI...............  (G) Additive,       (G) Salt of acidic
                                                                      open, non-          polymers with
                                                                      dispersive use.     monomeric and
                                                                                          polymeric bases.
P-13-0124............   11/20/2012    2/17/2013  DIC International   (G) Polymer for     (G) Coating polymer.
                                                  (USA) LLC.          coating.
P-13-0125............   11/20/2012    2/17/2013  Soane Energy LLC..  (G) Used in the     (S) Poly(oxy-1,2-
                                                                      upstream oil and    ethanediyl), .alpha.-
                                                                      gas industry.       hydro-.omega.-hydroxy-
                                                                                          , hydrogen 2-C15	20-
                                                                                          alkenylbutanediotes.
P-13-0126............   11/20/2012    2/17/2013  Soane Energy LLC..  (G) Used in the     (S) Poly(oxy-1,2-
                                                                      upstream oil and    ethanediyl), .alpha.-
                                                                      gas industry.       hydro-.omega.-hydroxy-
                                                                                          , hydrogen 2-C15	20-
                                                                                          alkenylbutanediotes,
                                                                                          sodium salts.
P-13-0127............   11/20/2012    2/17/2013  Miwon North         (S) Resin for       (G) Monofunctional
                                                  America, Inc..      industrial          acrylate.
                                                                      coating.
P-13-0128............   11/21/2012    2/18/2013  CBI...............  (G) Additive,       (G) Polyether modified
                                                                      open, non-          potassium polystyrene
                                                                      dispersive use.     maleate.
P-13-0129............   11/21/2012    2/18/2013  CBI...............  (G) Additive,       (G) Polyether modified
                                                                      open, non-          fatty acid dimmer.
                                                                      dispersive use.
P-13-0130............   11/20/2012    2/17/2013  CBI...............  (G) Flow improver   (G) Formaldehyde,
                                                                      for oilfield        polymer with
                                                                      applications.       alklyphenols.
P-13-0131............   11/26/2012    2/23/2013  CBI...............  (G) Inhibitor for   (G) Tertiary ammonium
                                                                      oil field           compound.
                                                                      applications.
P-13-0132............   11/26/2012    2/23/2013  Euticals, Inc.....  (S) Monomer         (S) Boronic acid, b-[3-
                                                                      intermediate for    [(1-oxo-2-propen-1-
                                                                      use in the          yl)amino]phenyl]-.
                                                                      manufacture of a
                                                                      polymer.
P-13-0133............   11/27/2012    2/24/2013  CBI...............  (G) Catalyst for    (G) Dichlorophosphazene
                                                                      silicone            oligomers.
                                                                      polymerization.
P-13-0134............   11/27/2012    2/24/2013  CBI...............  (G) Catalyst for    (G) Partially
                                                                      silicone            hydrolyzed
                                                                      polymerization.     dichlorophosphazene
                                                                                          oligomers.
P-13-0135............   11/26/2012    2/23/2013  Euticals, Inc.....  (S) Intermediate    (G) Substituted
                                                                      monomer for use     benzenamine.
                                                                      in the
                                                                      manufacture of
                                                                      another monomer.
P-13-0136............   11/28/2012    2/25/2013  Sika Corporation..  (G) Roof membrane   (G) Latent hardener for
                                                                      hardener.           polyurethane.
P-13-0137............   11/28/2012    2/25/2013  CBI...............  (G) Chemical        (S) Butanedioic acid, 2-
                                                                      additive.           (2-octen-1-yl)-.
P-13-0138............   11/28/2012    2/25/2013  CBI...............  (G) Textile         (S) Butanedioic acid, 2-
                                                                      processing          (2-octen-1-yl)-,
                                                                      additive.           potassium salt (1:2).
P-13-0139............   11/28/2012    2/25/2013  CBI...............  (G) Gasoline        (G) Fatty acids, alkyl-
                                                                      additive.           unsaturated, esters
                                                                                          with polyol.
P-13-0140............   11/29/2012    2/26/2013  CBI...............  (G) Solvent.......  (S) Pentanoic acid, 5-
                                                                                          (dimethylamino)-2-
                                                                                          methyl-5-oxo-, methyl
                                                                                          ester.
P-13-0141............   11/29/2012    2/26/2013  Dow Chemical        (S) Hardener for    (G) Alkyl amines
                                                  Company.            epoxy               polymer with
                                                                      thermosetting       polyglycol ether, and
                                                                      coatings.           bis a epoxy reaction
                                                                                          products with aromatic
                                                                                          epoxies.

[[Page 76033]]

 
P-13-0142............   11/30/2012    2/27/2013  Scott Bader, Inc..  (G) Fabrication of  (G) Unsaturated
                                                                      composite           urethane methacrylate.
                                                                      articles.
----------------------------------------------------------------------------------------------------------------

    In Table II. of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the TMEs 
received by EPA during this period: The EPA case number assigned to the 
TME, the date the TME was received by EPA, the projected end date for 
EPA's review of the TME, the submitting manufacturer/importer, the 
potential uses identified by the manufacturer/importer in the TME, and 
the chemical identity.

                               Table II-- 3 TMEs Received From 11/1/12 to 11/30/12
----------------------------------------------------------------------------------------------------------------
                                     Projected
       Case No.          Received    notice end     Manufacturer/            Use                 Chemical
                           date         date          importer
----------------------------------------------------------------------------------------------------------------
T-13-0002............    11/1/2012   12/15/2012  Cytec Industries,   (G) Resin for non-  (G) Alkenenitrile,
                                                  Inc..               dispersive use.     polymer with
                                                                                          alkadiene, substituted
                                                                                          alkyl-terminated,
                                                                                          polymers with
                                                                                          substituted
                                                                                          carbonomocycles,
                                                                                          alkoxy-terminated-
                                                                                          substituted alkyl-
                                                                                          alkadiene polymer,
                                                                                          substituted
                                                                                          carbomonocycle and
                                                                                          halogen substituted
                                                                                          carbomonocycle.
T-13-0003............   11/12/2012   12/26/2012  Cytec Industries,   (G) Coating resin.  (G) Alkenoic acid,
                                                  Inc..                                   reaction product with
                                                                                          alkylpolyol, polymers
                                                                                          with substituted
                                                                                          heteromonocycle.
T-13-0004............   11/26/2012     1/9/2013  CBI...............  (G) Inhibitor for   (G) Tertiary ammonium
                                                                      oil field           compound.
                                                                      applications.
----------------------------------------------------------------------------------------------------------------

    In Table III. of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the NOCs 
received by EPA during this period: The EPA case number assigned to the 
NOC, the date the NOC was received by EPA, the projected end date for 
EPA's review of the NOC, and chemical identity.

                              Table III--32 NOCs Received From 11/1/12 to 11/30/12
----------------------------------------------------------------------------------------------------------------
                                                     Commencement
            Case No.               Received date   notice end date                    Chemical
----------------------------------------------------------------------------------------------------------------
J-12-0004.......................        11/5/2012       10/25/2012  (G) Saccharomyces cerevisiae, strain CBI.
P-07-0101.......................       11/20/2012         5/7/2008  (G) Alkoxylate polymer.
P-08-0654.......................       11/20/2012         3/1/2009  (G) Fatty acids, C18-unsaturated., dimers,
                                                                     polymers with diamines and monoacids.
P-09-0106.......................       11/27/2012       11/14/2012  (G) Fatty acids, tall-oil, reaction products
                                                                     with modified fatty acids and
                                                                     polyalkanolamines, hydrochlorides.
P-09-0107.......................        11/1/2012        10/4/2012  (G) Fatty acids, tall-oil, reaction products
                                                                     with modified fatty acids and
                                                                     polyalkanolamines.
P-09-0263.......................       11/14/2012       10/24/2012  (S) 4-dodecenenitrile, (4z)-.
P-10-0014.......................       11/26/2012       11/15/2012  (G) Quino[2,3-b]acridine-7, 14-dione, 2,9-
                                                                     dichloro-5, 12-dihydro[4-[[2-
                                                                     (sulfooxy)ethyl]substituted]phenyl]-,sodium
                                                                     salt (1:1).
P-10-0560.......................       11/13/2012        10/4/2012  (G) Silyl-modified polymer.
P-10-0561.......................       11/19/2012        10/4/2012  (G) Silyl-modified polymer.
P-11-0016.......................       11/20/2012        11/1/2012  (G) Adipic acid, polymer with
                                                                     benzenepolycarboxylic acids, polyakylene
                                                                     glycol, alkanediols, 1,1'-
                                                                     methylenebis[isocyanatobenzene] and a
                                                                     substituted-, trialkoxysilane.
P-11-0368.......................       11/20/2012        8/11/2011  (G) Ipdi modified polyester resin.
P-11-0557.......................       11/27/2012        11/2/2012  (G) 2-propenoic acid, 2-methyl-, 2-
                                                                     hydroxyethyl ester, telomers with C18	26
                                                                     alkyl acrylate, 1-dodecanthiol, N-
                                                                     (hydroxymethyl)-2-methyl-2-propenamide,
                                                                     polyfluorooctyl methacrylate and vinylidene
                                                                     chloride, 2,2'-[1,2-diazenediylbis(1-
                                                                     methylethylidene)]-bis[4,5-dihydro-1H-
                                                                     imidazole]hydrochloride (1:2)-initiated.
P-12-0044.......................       11/30/2012        11/1/2012  (G) Multi-wall carbon nanotubes.
P-12-0143.......................       11/14/2012        11/2/2012  (G) Poly(oxy-1,4-butanediyl), -hydro-hydroxy-
                                                                     , polymer with alkyldisocyanates.
P-12-0152.......................       11/13/2012       10/31/2012  (G) Ester substituted bicyclic olefin.
P-12-0174.......................       11/28/2012        11/7/2012  (G) Polyurethane.
P-12-0246.......................       11/19/2012        11/7/2012  (G) Methyl, phenyl, amino-functional
                                                                     siloxanes and silsesquixane.
P-12-0247.......................       11/20/2012       10/10/2012  (G) Alkyl carboxylic acid, oxiranyl alkyl
                                                                     ester, polymer with cycloalkyl dicarboxylic
                                                                     acid anhydride, alkyl alcohol ester.
P-12-0248.......................       11/20/2012        11/1/2012  (G) Polyester type polyurethane resin.
P-12-0272.......................        11/6/2012        11/2/2012  (S) 1,3-benzenedicarboylic acid, polymer
                                                                     with 1,4-benzenedicarboxylic acid,2,2-
                                                                     dimethyl-1,3-propanediol, dodecanedioic
                                                                     acid, 1,2-ethanediol, hexanedioic acid, 1,6-
                                                                     hexanediol, .alpha.-hydroxy-.omega.-
                                                                     hydroxypoly[oxy(methyl-1,2-ethanediyl)] and
                                                                     1,1'-methylenebis[4-isocyanatobenzene].

[[Page 76034]]

 
P-12-0340.......................        11/2/2012       10/23/2012  (G) Reaction product of bisphenol a
                                                                     diglycidyl ether and an amineterminated
                                                                     cycloaliphatic propoxylate.
P-12-0363.......................        11/6/2012       10/27/2012  (G) Alkylcarboxyalkenyl polymer with
                                                                     carboxyalkenyl dihydroxyalkylate,
                                                                     carboxyalkenyl and alkylalkenyl sulfonate
                                                                     sodium salt.
P-12-0381.......................       11/26/2012       10/28/2012  (G) Amido amine polyether polymer.
P-12-0447.......................        11/9/2012        11/7/2012  (G) Hydrophobic modified acrylic swellable
                                                                     emulsion.
P-12-0476.......................        11/6/2012       10/29/2012  (G) Aromatic polyester polyether polyol.
P-12-0482.......................       11/27/2012       11/21/2012  (S) Flue dust, automotive metal recovery;
                                                                     definition: Flue dust collected from the
                                                                     hot gases released from a cupola furnace
                                                                     during a metal recovery process used by the
                                                                     automotive industry composed primarily of
                                                                     oxides of zinc, iron, manganese, aluminum,
                                                                     and silicon.
P-12-0483.......................        11/2/2012        11/1/2012  (G) Siloxanes and silicones, substituted
                                                                     alkyl group-terminated, ethoxylated,
                                                                     polymers with 5-isocyanato-1-
                                                                     (isocyanatomethyl)-,1,3,3-
                                                                     trimethylcyclohexane and N-alkyl glycol,
                                                                     hydroxyethyl methacrylate-blocked.
P-12-0501.......................        11/9/2012        11/8/2012  (S) Slimes and sludges, automotive phosphate
                                                                     conversion coating wastewater definition:
                                                                     The waste solution produced during the zinc
                                                                     phosphate conversion coating process of
                                                                     automobiles. It may contain oxides of iron,
                                                                     calcium, aluminum, zinc, nickel and
                                                                     magnesium.
P-12-0507.......................       11/27/2012       11/16/2012  (G) Poly(oxyalkylene) alkylamine.
P-12-0511.......................       11/20/2012       11/16/2012  (G) Poly(oxyalkylene) alkylamine.
P-12-0515.......................       11/20/2012       11/19/2012  (G) Polycarboxylic acids, polymer with
                                                                     polyols.
P-12-0517.......................       11/20/2012       11/19/2012  (G) Polycarboxylic acids, polymer with
                                                                     polyols.
----------------------------------------------------------------------------------------------------------------

    If you are interested in information that is not included in these 
tables, you may contact EPA as described in Unit II. to access 
additional non-CBI information that may be available.

List of Subjects

    Environmental protection, Chemicals, Hazardous substances, Imports, 
Notice of commencement, Premanufacturer, Reporting and recordkeeping 
requirements, Test marketing exemptions.

    Dated: December 10, 2012.
Chandler Sirmons,
Acting Director, Information Management Division, Office of Pollution 
Prevention and Toxics.
[FR Doc. 2012-31063 Filed 12-21-12; 4:15 pm]
BILLING CODE 6560-50-P


