
[Federal Register Volume 76, Number 180 (Friday, September 16, 2011)]
[Notices]
[Pages 57734-57738]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2011-23814]



[[Page 57734]]

=======================================================================
-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OPPT-2011-0744; FRL-8888-6]


Certain New Chemicals; Receipt and Status Information

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires 
any person who intends to manufacture (defined by statute to include 
import) a new chemical (i.e., a chemical not on the TSCA Chemical 
Substances Inventory (TSCA Inventory)) to notify EPA and comply with 
the statutory provisions pertaining to the manufacture of new 
chemicals. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to 
publish in the Federal Register a notice of receipt of a premanufacture 
notice (PMN) or an application for a test marketing exemption (TME), 
and to publish in the Federal Register periodic status reports on the 
new chemicals under review and the receipt of notices of commencement 
(NOC) to manufacture those chemicals. This document, which covers the 
period from June 6, 2011 to July 1, 2011, and provides the required 
notice and status report, consists of the PMNs and TMEs, both pending 
or expired, and the NOC to manufacture a new chemical that the Agency 
has received under TSCA section 5 during this time period.

DATES: Comments identified by the specific PMN number or TME number, 
must be received on or before October 17, 2011.

ADDRESSES: Submit your comments, identified by docket identification 
(ID) number EPA-HQ-OPPT-2011-0744, and the specific PMN number or TME 
number for the chemical related to your comment, by one of the 
following methods:
     Federal eRulemaking Portal: http://www.regulations.gov. 
Follow the on-line instructions for submitting comments.
     Mail: Document Control Office (7407M), Office of Pollution 
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 
Pennsylvania Ave., NW., Washington, DC 20460-0001.
     Hand Delivery: OPPT Document Control Office (DCO), EPA 
East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. The 
DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding 
legal holidays. The telephone number for the DCO is (202) 564-8930. 
Such deliveries are only accepted during the DCO's normal hours of 
operation, and special arrangements should be made for deliveries of 
boxed information.
    Instructions: EPA's policy is that all comments received will be 
included in the docket without change and may be made available on-line 
at http://www.regulations.gov, including any personal information 
provided, unless the comment includes information claimed to be 
Confidential Business Information (CBI) or other information whose 
disclosure is restricted by statute. Do not submit information that you 
consider to be CBI or otherwise protected through regulations.gov or e-
mail. The regulations.gov Web site is an ``anonymous access'' system, 
which means EPA will not know your identity or contact information 
unless you provide it in the body of your comment. If you send an e-
mail comment directly to EPA without going through regulations.gov, 
your e-mail address will be automatically captured and included as part 
of the comment that is placed in the docket and made available on the 
Internet. If you submit an electronic comment, EPA recommends that you 
include your name and other contact information in the body of your 
comment and with any disk or CD-ROM you submit. If EPA cannot read your 
comment due to technical difficulties and cannot contact you for 
clarification, EPA may not be able to consider your comment. Electronic 
files should avoid the use of special characters, any form of 
encryption, and be free of any defects or viruses.
    Docket: All documents in the docket are listed in the docket index 
available at http://www.regulations.gov. Although listed in the index, 
some information is not publicly available, e.g., CBI or other 
information whose disclosure is restricted by statute. Certain other 
material, such as copyrighted material, will be publicly available only 
in hard copy. Publicly available docket materials are available 
electronically at http://www.regulations.gov, or, if only available in 
hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA 
Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution 
Ave., NW., Washington, DC. The EPA/DC Public Reading Room hours of 
operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding 
legal holidays. The telephone number of the EPA/DC Public Reading Room 
is (202) 566-1744, and the telephone number for the OPPT Docket is 
(202) 566-0280. Docket visitors are required to show photographic 
identification, pass through a metal detector, and sign the EPA visitor 
log. All visitor bags are processed through an X-ray machine and 
subject to search. Visitors will be provided an EPA/DC badge that must 
be visible at all times in the building and returned upon departure.

FOR FURTHER INFORMATION CONTACT:
    For technical information contact: Bernice Mudd, Information 
Management Division (7407M), Office of Pollution Prevention and Toxics, 
Environmental Protection Agency, 1200 Pennsylvania Ave., NW., 
Washington, DC 20460-0001; telephone number: (202) 564-8951; fax 
number: (202) 564-8955; e-mail address: mudd.bernice@epa.gov.
    For general information contact: The TSCA-Hotline, ABVI-Goodwill, 
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 
554-1404; e-mail address: TSCA-Hotline@epa.gov.

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this action apply to me?

    This action is directed to the public in general. As such, the 
Agency has not attempted to describe the specific entities that this 
action may apply to. Although others may be affected, this action 
applies directly to the submitter of the PMNs addressed in this action. 
If you have any questions regarding the applicability of this action to 
a particular entity, consult the person listed under FOR FURTHER 
INFORMATION CONTACT.

B. What should I consider as I prepare my comments for EPA?

    1. Submitting CBI. Do not submit this information to EPA through 
regulations.gov or e-mail. Clearly mark the part or all of the 
information that you claim to be CBI. For CBI information in a disk or 
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as 
CBI and then identify electronically within the disk or CD-ROM the 
specific information that is claimed as CBI. In addition to one 
complete version of the comment that includes information claimed as 
CBI, a copy of the comment that does not contain the information 
claimed as CBI must be submitted for inclusion in the public docket. 
Information so marked will not be disclosed except in accordance with 
procedures set forth in 40 CFR part 2.
    2. Tips for preparing your comments. When submitting comments, 
remember to:
    i. Identify the document by docket ID number and other identifying 
information (subject heading, Federal Register date and page number).

[[Page 57735]]

    ii. Follow directions. The Agency may ask you to respond to 
specific questions or organize comments by referencing a Code of 
Federal Regulations (CFR) part or section number.
    iii. Explain why you agree or disagree; suggest alternatives and 
substitute language for your requested changes.
    iv. Describe any assumptions and provide any technical information 
and/or data that you used.
    v. If you estimate potential costs or burdens, explain how you 
arrived at your estimate in sufficient detail to allow for it to be 
reproduced.
    vi. Provide specific examples to illustrate your concerns and 
suggest alternatives.
    vii. Explain your views as clearly as possible, avoiding the use of 
profanity or personal threats.
    viii. Make sure to submit your comments by the comment period 
deadline identified.

II. Why is EPA taking this action?

    EPA classifies a chemical substance as either an ``existing'' 
chemical or a ``new'' chemical. Any chemical substance that is not on 
EPA's TSCA Inventory is classified as a ``new chemical,'' while those 
that are on the TSCA Inventory are classified as an ``existing 
chemical.'' For more information about the TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to 
manufacture or import a new chemical substance for a non-exempt 
commercial purpose is required by TSCA section 5 to provide EPA with a 
PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes 
EPA to allow persons, upon application, to manufacture (includes 
import) or process a new chemical substance, or a chemical substance 
subject to a significant new use rule (SNUR) issued under TSCA section 
5(a), for ``test marketing'' purposes, which is referred to as a test 
marketing exemption, or TME. For more information about the 
requirements applicable to a new chemical go to: http://ww.epa.gov/opt/newchems.
    Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish 
in the Federal Register a notice of receipt of a PMN or an application 
for a TME and to publish in the Federal Register periodic status 
reports on the new chemicals under review and the receipt of NOCs to 
manufacture those chemicals. This status report, which covers the 
period from June 6, 2011 to July 1, 2011, consists of the PMNs and 
TMEs, both pending or expired, and the NOCs to manufacture a new 
chemical that the Agency has received under TSCA section 5 during this 
time period.

III. Receipt and Status Reports

    In Table I. of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the PMNs 
received by EPA during this period: The EPA case number assigned to the 
PMN, the date the PMN was received by EPA, the projected end date for 
EPA's review of the PMN, the submitting manufacturer/importer, the 
potential uses identified by the manufacturer/importer in the PMN, and 
the chemical identity.

                           Table I--48 PMNs Received From June 6, 2011 to July 1, 2011
----------------------------------------------------------------------------------------------------------------
                                   Projected
       Case No.          Received    notice       Manufacturer/importer            Use              Chemical
                           date     end date
----------------------------------------------------------------------------------------------------------------
P-11-0424.............   6/6/2011   9/3/2011  CBI.........................  (G) Monomer for    (G) Alkenoyloxy
                                                                             polymer            arylphenone.
                                                                             applications.
P-11-0431.............   6/6/2011   9/3/2011  Cytec Industries Inc........  (G) Coatings       (G)
                                                                             resin.             Poly[oxyalkylene
                                                                                                diyl], .alpha.-
                                                                                                hydro-.omega.-
                                                                                                hydroxy-,
                                                                                                polymer with
                                                                                                disubstituted
                                                                                                carbomonocycle,
                                                                                                alkyl acrylate
                                                                                                blocked.
P-11-0432.............   6/6/2011   9/3/2011  Hybrid Plastics, Inc........  (G) 1.             (S)
                                                                             Themoplastics      Tricyclo[7.3.3.1
                                                                             and coatings       5,
                                                                             additive; 2.       11]heptasiloxane-
                                                                             Elastomer          3,7,14-triol,
                                                                             additive.          1,3,5,7,9,11,14-
                                                                                                heptaisooctyl-
                                                                                                stereoisomer.
P-11-0433.............   6/7/2011   9/4/2011  CBI.........................  (G) For use in     (G) Substituted
                                                                             cleaning           amino polymer,
                                                                             detergents.        with substituted
                                                                                                amine salt and
                                                                                                salted acrylate.
P-11-0434.............   6/8/2011   9/5/2011  CBI.........................  (S) Curing agent   (G) Cashew,
                                                                             for epoxy resin.   nutshell liq.,
                                                                                                polymer with
                                                                                                arylalkylamine,
                                                                                                bisphenol a,
                                                                                                epichlorohydrin
                                                                                                and
                                                                                                formaldehyde.
P-11-0435.............   6/9/2011   9/6/2011  CBI.........................  (G) Chemical       (G) Alkoxylated
                                                                             intermediate.      amine
                                                                                                derivative.
P-11-0436.............   6/9/2011   9/6/2011  CBI.........................  (G) Chemical       (G) Polyether
                                                                             intermediate.      sulfate salt
                                                                                                derivative.
P-11-0437.............   6/9/2011   9/6/2011  CBI.........................  (G) Polymeric      (G) Substituted
                                                                             colorant.          anthraquinone
                                                                                                colorant.
P-11-0438.............   6/9/2011   9/6/2011  CBI.........................  (G) Colorant for   (G) Polyester
                                                                             polyurethane.      substituted
                                                                                                antraquinone
                                                                                                colorant.
P-11-0439.............  6/10/2011   9/7/2011  SCNTE LLC...................  (G) The material   (S) Carbide
                                                                             will be used as    derived
                                                                             the sensor         nancarbon.
                                                                             element in an
                                                                             electrochemical
                                                                             sensor. One
                                                                             carbon nanotube-
                                                                             sic device will
                                                                             be use per one
                                                                             sensor. The
                                                                             maximum
                                                                             estimated annual
                                                                             quantity of
                                                                             sensors will be
                                                                             10,000. This
                                                                             completed sensor
                                                                             will be able to
                                                                             detect metals
                                                                             and nutrients in
                                                                             water.

[[Page 57736]]

 
P-11-0440.............  6/13/2011  9/10/2011  CBI.........................  (G) Polymeric      (G) Fatty acids,
                                                                             film former for    dimers, polymers
                                                                             coatings.          with aliphatic
                                                                                                acrylate,
                                                                                                aliphatic
                                                                                                methacrylate,
                                                                                                dihydrocarboxyli
                                                                                                c acids,
                                                                                                hydroxyl
                                                                                                terminated
                                                                                                polyalkene,
                                                                                                cycloaliphatic
                                                                                                diisocyanate,
                                                                                                aromatic
                                                                                                dicarboxylic
                                                                                                acid, aliphatic
                                                                                                polyether diol,
                                                                                                and aliphatic
                                                                                                diol.
P-11-0441.............  6/13/2011  9/10/2011  CBI.........................  (G) Destructive    (G) Magnesium
                                                                             use.               supported
                                                                                                titanium.
P-11-0442.............  6/14/2011  9/11/2011  CBI.........................  (G) Chemical       (G) Polyether
                                                                             intermediate.      amine
                                                                                                derivative.
P-11-0443.............  6/15/2011  9/12/2011  CBI.........................  (G) Additive for   (G) Modified
                                                                             manufacture of     starch acrylate
                                                                             articles.          polymer.
P-11-0444.............  6/16/2011  9/13/2011  Evonik Goldschmidt Corp.....  (S) Industrial     (S) Hexadecanoic
                                                                             adhesive.          acid, eicosyl
                                                                                                ester.
P-11-0445.............  6/19/2011  9/16/2011  CBI.........................  (G) Additive for   (G)
                                                                             textile            Polyalkyacrylate
                                                                             finishing.         copolymer.
P-11-0446.............  6/20/2011  9/17/2011  DIC International (USA) LLC.  (G) Colorant for   (G)
                                                                             industrial         Carbopolycycle-
                                                                             coatings.          bis(diazonium),
                                                                                                dihalo, chloride
                                                                                                (1:2), reaction
                                                                                                products with
                                                                                                metal sulfate,
                                                                                                calcium
                                                                                                carbonate, N-(2-
                                                                                                alkylphenyl)-
                                                                                                oxoalkanamide,
                                                                                                potassium 4-
                                                                                                [dioxoalkylamino
                                                                                                ]substituted
                                                                                                benzene (1:1)
                                                                                                and sodium
                                                                                                hydroxide.
P-11-0447.............  6/21/2011  9/18/2011  Huntsman Corporation........  (S) Gas treatment  (G)
                                                                             product to         Polyetheramine.
                                                                             remove hydrogen
                                                                             sulfide from
                                                                             natural gas.
P-11-0448.............  6/21/2011  9/18/2011  GE Water & Process            (S) Heavy metal    (G) Sodium
                                               technologies.                 precipitant for    polyethylenimine
                                                                             wastewater.        dithiocarbamate,
                                                                                                polymeric
                                                                                                dithiocarbamate.
P-11-0449.............  6/21/2011  9/18/2011  CBI.........................  (S) Resin for      (S) Glycerides,
                                                                             wood coatings.     C16	18 and C18
                                                                                                unsaturated mono-
                                                                                                and di-,
                                                                                                polymers with a-
                                                                                                [[[5-[[bis(2-
                                                                                                hydroxyethyl)ami
                                                                                                no]carbonyl]amin
                                                                                                o]-2 (or 4)-
                                                                                                methylphenyl]ami
                                                                                                no]carbonyl]--W-
                                                                                                methoxypoly(oxy-
                                                                                                1,2-ethanediyl),
                                                                                                bisphenol a-
                                                                                                epichlorohydrin
                                                                                                polymer
                                                                                                linoleate,
                                                                                                hydrazine, 3-
                                                                                                hydroxy-2-
                                                                                                (hydroxymethyl)-
                                                                                                2-
                                                                                                methylpropanoic
                                                                                                acid, 5-
                                                                                                isocyanato-1-
                                                                                                (isocyanatomethy
                                                                                                l)-1,3,3-
                                                                                                trimethylcyclohe
                                                                                                xane and 1,1'-
                                                                                                methylenebis [4-
                                                                                                isocyantocyclohe
                                                                                                xane], compds,
                                                                                                with trie
                                                                                                thylamine*.
P-11-0450.............  6/21/2011  9/18/2011  CBI.........................  (G) Additive for   (G) Fatty acids
                                                                             paper coatings.    of natural
                                                                                                waxes.
P-11-0451.............  6/21/2011  9/18/2011  CBI.........................  (G) Additive for   (G) Fatty acids
                                                                             paper coatings.    of natural
                                                                                                waxes, 1,3
                                                                                                butylene glycol
                                                                                                esters, part.
                                                                                                saponified.
P-11-0452.............  6/21/2011  9/18/2011  CBI.........................  (G) Additive for   (G) Fatty acids
                                                                             paper coatings.    of natural
                                                                                                waxes, ethylene
                                                                                                esters.
P-11-0453.............  6/22/2011  9/19/2011  3M Company..................  (S) Moisture       (G) Polyurethane
                                                                             curing hot melt    prepolymer.
                                                                             adhesive.
P-11-0454.............  6/23/2011  9/20/2011  CBI.........................  (G) Resin for      (G) Thermoset
                                                                             automotive         acrylic polymer.
                                                                             coatings.
P-11-0455.............  6/23/2011  9/20/2011  CBI.........................  (G) Resin for      (G) Thermoset
                                                                             automotive         acrylic polymer.
                                                                             coatings.
P-11-0456.............  6/23/2011  9/20/2011  CBI.........................  (G) Resin for      (G) Thermoset
                                                                             automotive         acrylic polymer.
                                                                             coatings.
P-11-0457.............  6/23/2011  9/20/2011  CBI.........................  (G) Resin for      (G) Thermoset
                                                                             automotive         acrylic polymer.
                                                                             coatings.
P-11-0458.............  6/23/2011  9/20/2011  CBI.........................  (G) Resin for      (G) Thermoset
                                                                             automotive         acrylic polymer.
                                                                             coatings.
P-11-0459.............  6/23/2011  9/20/2011  CBI.........................  (G) Resin for      (G) Thermoset
                                                                             automotive         acrylic polymer.
                                                                             coatings.
P-11-0460.............  6/27/2011  9/24/2011  CBI.........................  (G) Coatings       (G) Borate ester
                                                                             additive, open-    of
                                                                             non dispersive     hydroxyethylmeth
                                                                             use.               acrylate.
P-11-0461.............  6/27/2011  9/24/2011  CBI.........................  (G) Coatings       (G) Borate ester
                                                                             additive, open-    of
                                                                             non dispersive     hydroxyethylmeth
                                                                             use.               acrylate.
P-11-0462.............  6/27/2011  9/24/2011  CBI.........................  (G) Coatings       (G) Borate ester
                                                                             additive, open-    of
                                                                             non dispersive     hydroxyethylmeth
                                                                             use.               acrylate.
P-11-0463.............  6/27/2011  9/24/2011  Zeon Chemicals L.P..........  (S) Lithium ion    (G) Modified
                                                                             battery            acrylate
                                                                             manufacture.       polymer.

[[Page 57737]]

 
P-11-0464.............  6/28/2011  9/25/2011  CBI.........................  (G) Water soluble  (S) Phenol, 4,4'-
                                                                             polyamine curing   (1-
                                                                             agent for epoxy    methylethylidene
                                                                             coatings.          )bis-, polymer
                                                                                                with 5-amino-
                                                                                                1,3,3-
                                                                                                trimethylcyclohe
                                                                                                xanemethanamine,
                                                                                                N1,N2-bis(2-
                                                                                                aminoethyl)-1,2-
                                                                                                ethanediamine, 2-
                                                                                                (chloromethyl)ox
                                                                                                irane, .alpha.-
                                                                                                hydro-.omega.-
                                                                                                hydroxypoly[oxy(
                                                                                                methyl-1,2-
                                                                                                ethanediyl)],
                                                                                                2,2'-[(1-
                                                                                                methylethylidene
                                                                                                )bis(4,1-
                                                                                                phenyleneoxymeth
                                                                                                ylene)]bis[oxira
                                                                                                ne] and .alpha.-
                                                                                                (2-
                                                                                                oxiranylmethyl)-
                                                                                                .omega.-(2-
                                                                                                oxiranylmethoxy)
                                                                                                poly[oxy(methyl-
                                                                                                1,2-
                                                                                                ethanediyl)],
                                                                                                reaction
                                                                                                products with 2-
                                                                                                [[4-(11-
                                                                                                dimethylethyl)ph
                                                                                                enoxy]methyl]oxi
                                                                                                rane*.
P-11-0465.............  6/28/2011  9/25/2011  Dow Chemical Company........  (S) Component      (G) Benzene
                                                                             rigid              dicarboxylic
                                                                             polyurethane       acid, polyesters
                                                                             foam for           with glycols and
                                                                             appliances.        polyether
                                                                                                polyol.
P-11-0466.............  6/29/2011  9/26/2011  CBI.........................  (G) Chemical       (G) Alkoxylated
                                                                             intermediate.      amine
                                                                                                derivative.
P-11-0467.............  6/29/2011  9/26/2011  CBI.........................  (G) Chemical       (G) Polyether
                                                                             intermediate.      sulfate salt
                                                                                                derivative.
P-11-0468.............  6/29/2011  9/26/2011  CBI.........................  (G) Chemical       (G) Polyether
                                                                             intermediate.      amine
                                                                                                derivative.
P-11-0469.............  6/29/2011  9/26/2011  CBI.........................  (G) Polymeric      (G) Polycyclic
                                                                             colorant.          aromatic
                                                                                                colorant.
P-11-0470.............  6/29/2011  9/26/2011  CBI.........................  (G) Colorant for   (G) Polyester
                                                                             polymer articles.  substituted
                                                                                                polycyclic
                                                                                                aromatic
                                                                                                colorant.
P-11-0471.............  6/29/2011  9/26/2011  OM Group, Inc...............  (G) Production of  (S) Manganese
                                                                             energy storage     hydroxide
                                                                             devices.           oxide*.
P-11-0472.............  6/29/2011  9/26/2011  OM Group, Inc...............  (G) Production of  (S) Manganese
                                                                             energy storage     hydroxide*.
                                                                             devices.
P-11-0473.............  6/30/2011  9/27/2011  Omnova Solutions Inc........  (S) Surfactant     (S) Boron,
                                                                             for the flow,      trifluoro(tetrah
                                                                             leveling and       ydrofuran)-, (T-
                                                                             wetting of         4)-, polymer
                                                                             aqueous coating    with .alpha.-
                                                                             formulations;      hydro-.omega.-
                                                                             surfactant for     hydroxypoly(oxy-
                                                                             use in ink         1,2-ethanediyl)
                                                                             formulaitons for   and 3-methyl-3-
                                                                             high resolutions   [(2,2,3,3,3-
                                                                             ink jet printers.  pentafluoropropo
                                                                                                xy)methyl]oxetan
                                                                                                e*.
P-11-0474.............  6/30/2011  9/27/2011  Omnova Solutions Inc........  (S) Surfactant     (S) Boron,
                                                                             for the flow,      trifluoro
                                                                             leveling and       (tetrahydrofuran
                                                                             wetting of         )-, (T-4)-,
                                                                             aqueous coating    polymer with
                                                                             formulations;      methyloxirane, 3-
                                                                             surfactant for     methyl-3-
                                                                             use in ink         [(2,2,3,3,3-
                                                                             formulaitons for   pentapropoxy)met
                                                                             high resolutions   hyl]oxetane,
                                                                             ink jet printers.  oxirane and
                                                                                                tetrahydrofuran*
                                                                                                .
P-11-0475.............  6/30/2011  9/27/2011  CBI.........................  (G) Agent used in  (G) Alkylidene
                                                                             motor coil.        bisphenol,
                                                                                                polymer with 2-
                                                                                                (chloromethyl)ox
                                                                                                irane, alkyl-oxo-
                                                                                                2-propen-1-
                                                                                                yl)oxy]alkyl 4-
                                                                                                cycloalkene-1,2-
                                                                                                dicarboxylate.
P-11-0476.............  6/30/2011  9/27/2011  E.I. Dupont de Nemours and    (G) Extrusion and  (G) Dicarboxylic
                                               Company.                      molding resin.     acid, compound
                                                                                                with 1,6-
                                                                                                hexanediamine
                                                                                                alkyldioate,
                                                                                                homopolymer.
P-11-0477.............  6/30/2011  9/27/2011  E.I. Dupont de Nemours and    (G) Extrusion and  (G) Dicarboxylic
                                               Company.                      molding resin.     acid, compound
                                                                                                with 1,6-
                                                                                                hexanediamine
                                                                                                alkyldioate,
                                                                                                homopolymer.
----------------------------------------------------------------------------------------------------------------

    In Table II. of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the TMEs 
received by EPA during this period: The EPA case number assigned to the 
TME, the date the TME was received by EPA, the projected end date for 
EPA's review of the TME, the submitting manufacturer/importer, the 
potential uses identified by the manufacturer/importer in the TME, and 
the chemical identity.

[[Page 57738]]



                                               Table II--1 TME Received From June 6, 2011 to July 1, 2011
--------------------------------------------------------------------------------------------------------------------------------------------------------
                                                          Projected
               Case No.                 Received date    notice end      Manufacturer/importer              Use                       Chemical
                                                            date
--------------------------------------------------------------------------------------------------------------------------------------------------------
T-11-0010............................        6/6/2011       7/20/2011  Cytec industries inc....  (G) Coatings resin......  (G) Poly[oxyalkylenediyl],
                                                                                                                            .alpha.-hydro-.omega.-
                                                                                                                            hydroxy-, polymer with
                                                                                                                            disubstituted
                                                                                                                            carbomonocycle, alkyl
                                                                                                                            acrylate blocked.
--------------------------------------------------------------------------------------------------------------------------------------------------------

    In Table III. of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the NOCs 
received by EPA during this period: The EPA case number assigned to the 
NOC, the date the NOC was received by EPA, the projected end date for 
EPA's review of the NOC, and chemical identity.

                          Table III--26 NOCs Received From June 6, 2011 to July 1, 2011
----------------------------------------------------------------------------------------------------------------
                                                              Commencement
                  Case No.                    Received date    notice end                  Chemical
                                                                  date
----------------------------------------------------------------------------------------------------------------
P-01-0491..................................       6/17/2011        6/6/2011  (G) Hydroxy urethane.
P-04-0853..................................        6/7/2011      11/22/2005  (G) Aluminum salt of a quinacridone
                                                                              derivative.
P-09-0336..................................       6/22/2011       5/25/2011  (G) Alkyl dioic acid polymer with
                                                                              alkyl diol, .alpha.-hydro-.omega.-
                                                                              hydroxypoly(oxy-alkyldiyl),
                                                                              aromatic isocyanate, alkyl diol.
P-10-0367..................................       6/16/2011       5/18/2011  (G) Carbon black derived from the
                                                                              pyrolysis of rubber tire shreds.
P-10-0470..................................       6/23/2011       6/20/2011  (G) Fluoro modified, polyether
                                                                              modified and alkyl modified
                                                                              polymethylsiloxane.
P-10-0508..................................       6/23/2011       5/27/2011  (G) Mixed mono and di carboxylic
                                                                              acids.
P-10-0575..................................       6/29/2011       6/10/2011  (G) Methacrylic acid polymer with
                                                                              isoalkylmethacrylamide,
                                                                              arylmethacrylate, and
                                                                              alkenylmethacrylate.
P-11-0021..................................       6/29/2011       3/25/2011  (S) 2-propenoic acid, 2-methyl-,
                                                                              dodecyl ester, polymer with 2-
                                                                              hydroxyethyl 2-methyl-2-
                                                                              propenoate, rel-(1r,2r,4r)-1,7,7-
                                                                              trimethylbicyclo[2.2.1]hept-2-yl 2-
                                                                              methyl-2-propenoate and rel-
                                                                              (1r,2r,4r)1,7,7-
                                                                              trimethylbicyclo[2.2.1]hept-2-yl 2-
                                                                              propenoate, tert-bu peroxide-
                                                                              initiated*.
P-11-0022..................................       6/29/2011       3/25/2011  (S) 2-propenoic acid, 2-methyl-, 2-
                                                                              hydroxyethyl ester, polymer with
                                                                              rel-(1r,2r,4r)-1,7,7-
                                                                              trimethylbicyclo[2.2.1]hept-2-yl 2-
                                                                              methyl-2-propenoate and rel-
                                                                              (1r,2r,4r)--1,7,7-
                                                                              trimethylbicyclo[2.2.1]hept-2-yl 2-
                                                                              propenoate.
P-11-0039..................................       6/27/2011       6/24/2011  (G) Silsesquioxanes, polyacrylate.
P-11-0076..................................        7/1/2011       6/28/2011  (G) Polyurethane derivative.
P-11-0077..................................       6/21/2011       6/20/2011  (G) Benzenedicarboxylic acid,
                                                                              polymer with 1,4-butanediol, (2e)-
                                                                              2-butenedioic acid, decanedioic
                                                                              acid, ethenylbenzene, 2-ethylhexyl
                                                                              2-propenoate, hexanedioic acid,
                                                                              1,6-hexane derivatives and 2-
                                                                              propenoic acid, tert-bu peroxide-
                                                                              initiated.
P-11-0098..................................       6/13/2011        6/9/2011  (S) Phenol, 2-[1-[[3-(1h-imidazol-1-
                                                                              yl)propyl]imino]ethyl]-*.
P-11-0118..................................        6/6/2011        5/6/2011  (G) Methyl alkene ester of benzoic
                                                                              acid.
P-11-0147..................................        6/6/2011       5/18/2011  (G) Ultraviolet-curablepolyester
                                                                              polyurethane acrylate.
P-11-0189..................................       6/15/2011       5/24/2011  (S) Acetic acid, 2,2'-dithiobis-'
                                                                              diammonium salt.
P-11-0191..................................        6/6/2011       5/18/2011  (G) Ultraviolet-curable polyester
                                                                              polyurethane acrylate.
P-11-0205..................................       6/29/2011       6/10/2011  (G) Polyalkene, maleated potassium
                                                                              salts.
P-11-0206..................................       6/29/2011       5/24/2011  (G) Bisaryl iodonium salt.
P-11-0207..................................       6/29/2011       5/29/2011  (G) Substituted aromatic borate
                                                                              salt.
P-11-0225..................................        6/6/2011        6/3/2011  (S) Amines, C36-alkylenedi-,
                                                                              polymers with 6-aminohexanoic
                                                                              acid, 1,6-diisocyanato-2,2,4-
                                                                              trimethylhexane, 1,6-diisocyanato-
                                                                              2,4,4-trimethylhexane, 5,5'-[(1-
                                                                              methylethylidene)bis(4,1-
                                                                              phenyleneoxy)]bis[1,3-
                                                                              isobenzofurandione] and
                                                                              pyromellitic dianhydride, 2,5-
                                                                              dihydro-2,5-dioxo-1H-pyrrole-1-
                                                                              hexanoic acid-blocked.
P-11-0228..................................        6/7/2011        6/6/2011  (G) Benzaldehyde, reaction products
                                                                              with polyalkylenepolyamines,
                                                                              hydrogenated.
P-11-0237..................................       6/15/2011       6/14/2011  (S) D-glucopyranose, oligomeric,
                                                                              decyl octyl glycosides, polymer
                                                                              with 1,3-dichloro-2-propanol and
                                                                              sorbitan mono-(9z)-9-
                                                                              octadecenoate.
P-11-0248..................................       6/21/2011       6/20/2011  (G) Roin, polymer with ethylene
                                                                              glycol, propanediol,
                                                                              alkanedicarboxylic acid,
                                                                              terephthalic acid and trimellitic
                                                                              anhydride.
P-11-0259..................................       6/17/2011        6/5/2011  (G) Polyether polyester
                                                                              polyurethane adhesive.
P-11-0275..................................       6/30/2011       6/24/2011  (G) Hydroxy alkyl alkyl acrylate,
                                                                              polymer with alkyl acrylate,
                                                                              aromatic vinyl monomer, dialkyl
                                                                              acrylate and alkyl alkyl acrylate.
----------------------------------------------------------------------------------------------------------------

    If you are interested in information that is not included in these 
tables, you may contact EPA as described in Unit II. to access 
additional non-CBI information that may be available.

List of Subjects

    Environmental protection, Chemicals, Hazardous substances, Imports, 
Notice of commencement, Premanufacturer, Reporting and recordkeeping 
requirements, Test marketing exemptions.

    Dated: September 7, 2011.
Chandler Sirmons,
Acting Director, Information Management Division, Office of Pollution 
Prevention and Toxics.
[FR Doc. 2011-23814 Filed 9-15-11; 8:45 am]
BILLING CODE 6560-50-P


