
[Federal Register: November 24, 2010 (Volume 75, Number 226)]
[Notices]               
[Page 71688-71693]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr24no10-78]                         

-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OPPT-2010-0880; FRL-8852-1]

 
Certain New Chemicals; Receipt and Status Information

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: Under sections 5(d)(2) and 5(d)(3) of the Toxic Substances 
Control

[[Page 71689]]

Act (TSCA), EPA is required to publish in the Federal Register a notice 
of receipt of a premanufacture notice (PMN) or an application for a 
test marketing exemption (TME), and to publish in the Federal Register 
periodic status reports on the new chemicals under review and the 
receipt of notices of commencement (NOC) to begin the manufacture of 
those chemicals. This document covers the period from September 20, 
2010, to October 8, 2010, and provides the required notice and status 
report for the PMNs and TMEs, both pending or expired, and the NOCs to 
manufacture a new chemical that the Agency has received under TSCA 
section 5 during this time period.

DATES: Comments must be received on or before December 27, 2010.

ADDRESSES: Submit your comments, identified by docket identification 
(ID) number EPA-HQ-OPPT-2010-0880, and the specific PMN number or TME 
number for the chemical related to your comment, by one of the 
following methods:
     Federal eRulemaking Portal: http://www.regulations.gov. 
Follow the on-line instructions for submitting comments.
     Mail: Document Control Office (7407M), Office of Pollution 
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 
Pennsylvania Ave., NW., Washington, DC 20460-0001.
     Hand Delivery: OPPT Document Control Office (DCO), EPA 
East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. The 
DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding 
legal holidays. The telephone number for the DCO is (202) 564-8930. 
Such deliveries are only accepted during the DCO's normal hours of 
operation, and special arrangements should be made for deliveries of 
boxed information.
    Instructions: EPA's policy is that all comments received will be 
included in the docket without change and may be made available on-line 
at http://www.regulations.gov, including any personal information 
provided, unless the comment includes information claimed to be 
Confidential Business Information (CBI) or other information whose 
disclosure is restricted by statute. Do not submit information that you 
consider to be CBI or otherwise protected through regulations.gov or e-
mail. The regulations.gov Web site is an ``anonymous access'' system, 
which means EPA will not know your identity or contact information 
unless you provide it in the body of your comment. If you send an e-
mail directly to EPA without going through regulations.gov, your e-mail 
address will be automatically captured and included as part of the 
comment that is placed in the docket and made available on the 
Internet. If you submit an electronic comment, EPA recommends that you 
include your name and other contact information in the body of your 
comment and with any disk or CD-ROM you submit. If EPA cannot read your 
comment due to technical difficulties and cannot contact you for 
clarification, EPA may not be able to consider your comment. Electronic 
files should avoid the use of special characters, any form of 
encryption, and be free of any defects or viruses.
    Docket: All documents in the docket are listed in the docket index 
available at http://www.regulations.gov. Although listed in the index, 
some information is not publicly available, e.g., CBI or other 
information whose disclosure is restricted by statute. Certain other 
material, such as copyrighted material, will be publicly available only 
in hard copy. Publicly available docket materials are available 
electronically at http://www.regulations.gov, or, if only available in 
hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA 
Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution 
Ave., NW., Washington, DC. The EPA/DC Public Reading Room hours of 
operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding 
legal holidays. The telephone number of the EPA/DC Public Reading Room 
is (202) 566-1744, and the telephone number for the OPPT Docket is 
(202) 566-0280. Docket visitors are required to show photographic 
identification, pass through a metal detector, and sign the EPA visitor 
log. All visitor bags are processed through an X-ray machine and 
subject to search. Visitors will be provided an EPA/DC badge that must 
be visible at all times in the building and returned upon departure.

FOR FURTHER INFORMATION CONTACT: For technical information contact: 
Bernice Mudd, Information Management 7407M, Office of Pollution 
Prevention and Toxics, Environmental Protection Agency, 1200 
Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: 
(202) 564-8951; fax number: (202) 564-8955; e-mail address: 
mudd.bernice@epa.gov.
    For general information contact: The TSCA-Hotline, ABVI-Goodwill, 
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 
554-1404; e-mail address: TSCA-Hotline@epa.gov.

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this action apply to me?

    This action is directed to the public in general. As such, the 
Agency has not attempted to describe the specific entities that this 
action may apply to. Although others may be affected, this action 
applies directly to the submitter of the particular PMN or TME 
addressed in this document. If you have any questions regarding the 
applicability of this action to a particular entity, consult the person 
listed under FOR FURTHER INFORMATION CONTACT.

B. What should I consider as I prepare my comments for EPA?

    1. Submitting CBI. Do not submit CBI to EPA through regulations.gov 
or e-mail. Clearly mark the part or all of the information that you 
claim to be CBI. For CBI information in a disk or CD-ROM that you mail 
to EPA, mark the outside of the disk or CD-ROM as CBI and then identify 
electronically within the disk or CD-ROM the specific information that 
is claimed as CBI. In addition to one complete version of the comment 
that includes information claimed as CBI, a copy of the comment that 
does not contain the information claimed as CBI must be submitted for 
inclusion in the public docket. Information marked as CBI will not be 
disclosed except in accordance with procedures set forth in 40 CFR part 
2.
    2. Tips for preparing your comments. When submitting comments, 
remember to:
    i. Identify the document by docket ID number and other identifying 
information (subject heading, Federal Register date and page number).
    ii. Follow directions. The Agency may ask you to respond to 
specific questions or organize comments by referencing a Code of 
Federal Regulations (CFR) part or section number.
    iii. Explain why you agree or disagree; suggest alternatives and 
substitute language for your requested changes.
    iv. Describe any assumptions and provide any technical information 
and/or data that you used.
    v. If you estimate potential costs or burdens, explain how you 
arrived at your estimate in sufficient detail to allow for it to be 
reproduced.
    vi. Provide specific examples to illustrate your concerns and 
suggest alternatives.
    vii. Explain your views as clearly as possible, avoiding the use of 
profanity or personal threats.
    viii. Make sure to submit your comments by the comment period 
deadline identified.

[[Page 71690]]

II. Why is EPA taking this action?

    EPA classifies chemical substances as either ``existing'' chemicals 
or ``new'' chemicals. Any substance that is not on EPA's TSCA Chemical 
Substances Inventory, commonly referred to as the the TSCA Inventory, 
is classified as a ``new chemical,'' while those that are on the TSCA 
Inventory are classified as an ``existing chemical.'' For more 
information about the TSCA Inventory go to: http://www.epa.gov/
opptintr/newchems/pubs/inventory.htm. Anyone who plans to manufacture 
or import a new chemical substance for a non-exempt commercial purpose 
is required by section 5 of TSCA to provide EPA with a premanufacture 
notice, or PMN, before initiating the activity. Section 5(h)(1) 
authorizes EPA to allow persons, upon application, to manufacture 
(includes import) or process a new chemical substance, or a chemical 
substance subject to a significant new use rule (SNUR) issued under 
TSCA section 5(a), for ``test marketing'' purposes, which is referred 
to as a test marketing exemption, or TME. For more information about 
the requirements applicable to a new chemical go to: http://
www.epa.gov/oppt/newchems/.
    Under TSCA sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to 
publish in the Federal Register a notice of receipt of a PMN or an 
application for a TME and to publish in the Federal Register periodic 
status reports on the new chemicals under review and the receipt of the 
NOCs to begin the manufacture of those chemicals. This document, covers 
the period from September 20, 2010 to October 8, 2010, and provides the 
required notice and status report for the PMNs and TMEs, both pending 
or expired, and the NOCs to manufacture a new chemical that the Agency 
has received under TSCA section 5 during this time period.

III. Receipt and Status Reports

    In Table I. of this Unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the PMNs 
received by EPA during this period: The EPA case number assigned to the 
PMN, the date the PMN was received by EPA, the projected end date for 
EPA's review of the PMN, the submitting manufacturer; the potential 
uses identified by the manufacturer/importer in the PMN, and the 
chemical identity.

                       Table I--Premanufacture Notices Received From: 9/21/10 to 10/08/10
----------------------------------------------------------------------------------------------------------------
                                    Projected
      Case No.          Received   review  end      Manufacturer/              Use                Chemical
                          date         date           importer
----------------------------------------------------------------------------------------------------------------
P-10-0571...........     09/21/10     12/19/10  CBI.................  (G) Inhibitor for     (G) Quaternary
                                                                       oil applications.     ammonium compound.
P-10-0572...........     09/22/10     12/20/10  CBI.................  (S) Coatings for      (G)
                                                                       leather; water        Hexamethylenediisoc
                                                                       borne industiral      yanate homopolymer,
                                                                       coatings like wood.   alkoxy-terminated.
P-10-0573...........     09/23/10     12/21/10  CBI.................  (G) Polyurethane      (G) Thermoplastic
                                                                       (open,                polyurethane.
                                                                       nondispersive).
P-10-0574...........     09/23/10     12/21/10  CBI.................  (G) Additive, open,   (G) Polyisocyanate,
                                                                       non-dispersive use.   reaction product
                                                                                             with polyalkylene
                                                                                             oxide.
P-10-0575...........     09/27/10     12/25/10  Eastman Kodak         (S) Polymer used in   (G) Methacrylic acid
                                                 Company.              manufacture of        polymer with
                                                                       imaging media/        isoalkylmethacrylam
                                                                       products; for         ide,
                                                                       export.               arylmethacrylate,
                                                                                             and
                                                                                             alkenylmethacrylate
                                                                                             .
P-10-0576...........     09/27/10     12/25/10  CBI.................  (S) A surfactant in   (G)
                                                                       hard surface          Alkyloxypropylimino
                                                                       cleaning detergent;   dipropionic acid,
                                                                       laundry detergent.    monosodium salt.
P-10-0577...........     09/27/10     12/25/10  CBI.................  (G) Anti-friction     (G) Polyamideimide.
                                                                       coating.
P-10-0578...........     09/27/10     12/25/10  CBI.................  (G) Used in           (G)
                                                                       industrial coatings.  Alkylenealkanedioic
                                                                                             acid, polymer with
                                                                                             alkenylbenzene and
                                                                                             alkenenitrile,
                                                                                             ammonium salt,
                                                                                             alkylhydroperoxide-
                                                                                             initiated.
P-10-0579...........     09/27/10     12/25/10  CBI.................  (S) An isocyanate     (G) Aromatic
                                                                       for adhesives         isocyanate, polymer
                                                                       formulations.         with alkoxides and
                                                                                             diol.
P-10-0580...........     09/27/10     12/25/10  CBI.................  (G) Hole injection    (G)
                                                                       layer in a            Hetromonocyclic[3,4-
                                                                       polylmeric            b]thiophene,
                                                                       photovoltaic module.  homopolymer, 2-[1-
                                                                                             [difluoro[(1,2,2-
                                                                                             trifluoroethenyl)ox
                                                                                             y]methyl]-1,2,2,2-
                                                                                             tetrafluoroethoxy]-
                                                                                             1,1,2,2-
                                                                                             tetrafluoroethyoxy]-
                                                                                             1,1,2,2-
                                                                                             tetrafluoroethanesu
                                                                                             lfonic acid-
                                                                                             tetrafluoroethylene
                                                                                             polyer-doped.
P-10-0581...........     09/29/10     12/27/10  CBI.................  (G) Anti-caking       (S) Iron, isomerized
                                                                       agent.                tartarate sodium
                                                                                             complexes.
P-10-0582...........     09/28/10     12/26/10  CBI.................  (G) Moisture curing   (G) Isocyanate
                                                                       polyurethane          terminated urethane
                                                                       adhesive. The         polymer.
                                                                       predicted volume
                                                                       for every
                                                                       application is same
                                                                       for all 6 chemical
                                                                       substances. The
                                                                       production is same
                                                                       for all 6
                                                                       substances.
P-10-0583...........     09/28/10     12/26/10  CBI.................  (G) Moisture curing   (G) Isocyanate
                                                                       polyurethane          terminated urethane
                                                                       adhesive. The         polymer.
                                                                       predicted volume
                                                                       for every
                                                                       application is same
                                                                       for all 6 chemical
                                                                       substances. The
                                                                       production is same
                                                                       for all 6
                                                                       substances.

[[Page 71691]]


P-10-0584...........     09/28/10     12/26/10  CBI.................  (G) Moisture curing   (G) Isocyanate
                                                                       polyurethane          terminated urethane
                                                                       adhesive. The         polymer.
                                                                       predicted volume
                                                                       for every
                                                                       application is same
                                                                       for all 6 chemical
                                                                       substances. The
                                                                       production is same
                                                                       for all 6
                                                                       substances.
P-10-0585...........     09/28/10     12/26/10  CBI.................  (G) Moisture curing   (G) Isocyanate
                                                                       polyurethane          terminated urethane
                                                                       adhesive. The         polymer.
                                                                       predicted volume
                                                                       for every
                                                                       application is same
                                                                       for all 6 chemical
                                                                       substances. The
                                                                       production is same
                                                                       for all 6
                                                                       substances.
P-10-0586...........     09/28/10     12/26/10  CBI.................  (G) Moisture curing   (G) Isocyanate
                                                                       polyurethane          terminated urethane
                                                                       adhesive. The         polymer.
                                                                       predicted volume
                                                                       for every
                                                                       application is same
                                                                       for all 6 chemical
                                                                       substances. The
                                                                       production is same
                                                                       for all 6
                                                                       substances.
P-10-0587...........     09/28/10     12/26/10  CBI.................  (G) Moisture curing   (G) Isocyanate
                                                                       polyurethane          terminated urethane
                                                                       adhesive. The         polymer.
                                                                       predicted volume
                                                                       for every
                                                                       application is same
                                                                       for all 6 chemical
                                                                       substances. The
                                                                       production is same
                                                                       for all 6
                                                                       substances.
P-10-0588...........     09/29/10     12/27/10  CBI.................  (S) Precursor to      (S) Benzenamine,
                                                                       polyimide resin       4,4'-[1,3-
                                                                       used in aircraft      phenylenebis(1-
                                                                       material; precursor   methylethylidene)]b
                                                                       to polyimide resin    is-.
                                                                       used in electronic
                                                                       and it material.
P-10-0589...........     09/30/10     12/28/10  CBI.................  (G) Plasticizer for   (G) Dibasic acid
                                                                       resin.                ester.
P-10-0590...........     09/28/10     12/26/10  CBI.................  (G) Component/        (G) Modified ketal
                                                                       additive in polymer   ester.
                                                                       resins.
P-10-0591...........     09/30/10     12/28/10  CBI.................  (G) Adhesive system   (G)
                                                                       component.            Methylenebis[isocya
                                                                                             natobenzene],
                                                                                             polymer with
                                                                                             alkanedioic acid,
                                                                                             alkylene glycols,
                                                                                             alkoxylated
                                                                                             alkanepolyol and
                                                                                             substituted
                                                                                             trialkoxysilane.
P-10-0592...........     09/28/10     12/26/10  Cytec Industries Inc  (G) Coating resin...  (G) Fatty acids,
                                                                                             polymer with
                                                                                             substituted
                                                                                             carbopolycycle,
                                                                                             substuted
                                                                                             alkylamines,
                                                                                             substituted
                                                                                             alkyleneoxide and
                                                                                             glycidyl alkanoate,
                                                                                             substituted
                                                                                             alkanoic acid
                                                                                             (salts).
P-10-0593...........     09/29/10     12/27/10  CBI.................  (G) Adhesive          (G) Modified starch.
                                                                       ingredient.
P-11-0001...........     10/01/10     12/29/10  CBI.................  (G) Crosslinking      (G) Aromatic
                                                                       agent for coatings.   polyisocyanate,
                                                                                             aliphatic polyol
                                                                                             blocked.
P-11-0002...........     10/01/10     12/29/10  CBI.................  (G) Crosslinking      (G) Aromatic
                                                                       agent for coatings.   polyisocyanate,
                                                                                             aliphatic polyol
                                                                                             blocked.
P-11-0003...........     10/01/10     12/29/10  CBI.................  (G) Crosslinking      (G) Aromatic
                                                                       agent for coatings.   polyisocyanate,
                                                                                             aliphatic polyol
                                                                                             blocked.
P-11-0004...........     10/01/10     12/29/10  CBI.................  (G) Crosslinking      (G) Aromatic
                                                                       agent for coatings.   polyisocyanate,
                                                                                             aliphatic polyol
                                                                                             blocked.
P-11-0005...........     10/01/10     12/29/10  CBI.................  (G) Crosslinking      (G) Aromatic
                                                                       agent for coatings.   polyisocyanate,
                                                                                             aliphatic polyol
                                                                                             blocked.
P-11-0006...........     10/01/10     12/29/10  CBI.................  (G) Crosslinking      (G) Aromatic
                                                                       agent for coatings.   polyisocyanate,
                                                                                             aliphatic polyol
                                                                                             blocked.
P-11-0007...........     10/01/10     12/29/10  Organic Dyestuffs     (S) Leather dye for   (S) 2,7-
                                                 Corporation.          distribution; other   naphthalenedisulfon
                                                                       dyeing applications   ic acid, 4-amino-6-
                                                                       as needed.            [[4-[[[4-[(2,4-
                                                                                             diaminophenyl)azo]p
                                                                                             henyl]amino]sulfony
                                                                                             l]phenyl]azo]-5-
                                                                                             hydroxy-3-[(4-
                                                                                             nitrophenyl)azo]-,
                                                                                             dipotassium salt.
P-11-0008...........     10/01/10     12/29/10  CBI.................  (G) Component in      (G) Modified ketal
                                                                       resins.               ester.
P-11-0009...........     10/04/10     01/01/11  Interchem, Inc......  (S) Water soluble     (G) Alkoxylated
                                                                       corrosion inhibitor.  imidazoline.
P-11-0010...........     10/04/10     01/01/11  CBI.................  (S) Resin for         (G) Fatty acid
                                                                       coatings, stains,     modified polyester
                                                                       primes and lacquers.  aliphatic
                                                                                             polyurethane
                                                                                             dispersion.
P-11-0011...........     10/05/10     01/02/11  Dic International     (G) Adhesive........  (G) Polyol blocked
                                                 (USA) LLC.                                  cycloaliphatic
                                                                                             amine polymer.

[[Page 71692]]


P-11-0012...........     10/07/10     01/04/11  CBI.................  (G) A polymer used    (G) 2-propenoic
                                                                       in a concrete         acid, 2-methyl-,
                                                                       admixture which       telomer with 2-
                                                                       retains workability   propenoic acid and
                                                                       by retaining slump    sodium phosphinate
                                                                       in concrete precast   (1:1), ester with
                                                                       applications.         polyethylene
                                                                                             glycol,
                                                                                             peroxydisulfuric
                                                                                             acid
                                                                                             ([ho)s(o)2]2o2)sodi
                                                                                             um salt (1:2)-
                                                                                             initiated.
P-11-0013...........     10/05/10     01/02/11  Cytec Industries Inc  (G) Coatings resin..  (G) Alkyl dioic
                                                                                             acid, polymer with
                                                                                             substituted
                                                                                             alkanoate, alkyl
                                                                                             diisocyanate,
                                                                                             alkyldiol, and
                                                                                             substituted
                                                                                             alkanoic acid.
P-11-0014...........     10/05/10     01/02/11  Goulston              (G) Component of      (G) Alkyl amine
                                                 Technologies, Inc.    lubricant for         salt.
                                                                       finish product for
                                                                       fiber and yarn.
P-11-0015...........     10/06/10     01/03/11  CBI.................  (S) Ingredient for    (S)
                                                                       fragrance             Cyclohexanepentanol
                                                                       production.           , -methyl-.
----------------------------------------------------------------------------------------------------------------

    In Table II. of this Unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the TMEs 
received by EPA during this period: The EPA case number assigned to the 
TME, the date the TME was received by EPA, the projected end date for 
EPA's review of the TME, the submitting manufacturer/importer, the 
potential uses identified by the manufacturer/importer in the TME, and 
the chemical identity.

                 Table II--Test Marketing Exemption Notices Received From: 09/21/10 to 10/08/10
----------------------------------------------------------------------------------------------------------------
                                         Projected
      Case No.         Received date    review end       Manufacturer/            Use              Chemical
                                           date            importer
----------------------------------------------------------------------------------------------------------------
T-10-0009...........        09/28/10        11/11/10  Cytec Industries    (G) Coating resin.  (G) Fatty acids,
                                                       Inc..                                   polymer with
                                                                                               substituted
                                                                                               carbopolycycle,
                                                                                               substituted
                                                                                               akylamines,
                                                                                               substituted
                                                                                               akylneoxide and
                                                                                               glycidyl
                                                                                               alkenoate,
                                                                                               substituted
                                                                                               alkanoic acid
                                                                                               (salts).
T-11-0001...........        10/05/10        11/18/10  Cytec Industries    (G) Coating resin.  (G) Alkyl dioic
                                                       Inc..                                   acid, polymer
                                                                                               with substituted
                                                                                               alkanoate, alkyl
                                                                                               diisocyanate,
                                                                                               alkyldiol, and
                                                                                               substituted
                                                                                               alkanoic acid.
----------------------------------------------------------------------------------------------------------------

    In Table III. of this Unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the NOCs 
received by EPA during this period: The EPA case number assigned to the 
NOC, the date the NOC was received by EPA, the projected end date for 
EPA's review of the NOC, and the chemical identity.

      Table III--Notices of Commencement From: 9/21/10 to 10/08/10
------------------------------------------------------------------------
                                    Commencement
     Case No.       Received date   notice review         Chemical
                                      end date
------------------------------------------------------------------------
P-00-0129........        10/01/10        09/07/10  (S) L-aspartic acid,
                                                    N,N'-1,2-
                                                    ethanediylbis-,
                                                    compound with 2-
                                                    aminoethanol (1:3).
P-00-0130........        10/01/10        09/07/10  (S) L-aspartic acid,
                                                    N,N'-1,2-
                                                    ethanediylbis-,
                                                    compound with 2-
                                                    aminoethanol (1:4).
P-00-0131........        10/01/10        09/07/10  (S) L-aspartic acid,
                                                    N,N'-1,2-
                                                    ethanediylbis-,
                                                    sodium salt.
P-00-0135........        10/01/10        09/07/10  (S) L-aspartic acid,
                                                    N,N'-1,2-
                                                    ethanediylbis-,
                                                    tetrasodium salt.
P-00-0136........        10/01/10        09/07/10  (S) L-aspartic acid,
                                                    N,N'-1,2-
                                                    ethanediylbis-,
                                                    potassium salt.
P-00-0139........        10/01/10        09/07/10  (S) L-aspartic acid,
                                                    N,N'-1,2-
                                                    ethanediylbis-,
                                                    tripotassium salt.
P-00-0140........        10/01/10        09/07/10  (S) L-aspartic acid,
                                                    N,N'-1,2-
                                                    ethanediylbis-,
                                                    tetrapotassium salt.
P-00-0144........        10/01/10        09/07/10  (S) L-aspartic acid,
                                                    N,N'-1,2-
                                                    ethanediylbis-,
                                                    magnesium salt
                                                    (1:2).
P-00-0146........        10/01/10        09/07/10  (S) L-aspartic acid,
                                                    N,N'-1,2-
                                                    ethanediylbis-,
                                                    magnesium sodium
                                                    salt (1:1:2).
P-00-0153........        10/01/10        09/07/10  (S) L-aspartic acid,
                                                    N,N'-1,2-
                                                    ethanediylbis-
                                                    sodium salt,
                                                    compound with 2-
                                                    aminoethanol.
P-00-0154........        10/01/10        09/07/10  (S) L-aspartic acid,
                                                    N,N'-1,2-
                                                    ethanediylbis-
                                                    monosodium salt,
                                                    compound with 2-
                                                    aminoethanol (1:3).
P-00-0155........        10/01/10        09/07/10  (S) L-aspartic acid,
                                                    N,N'-1,2-
                                                    ethanediylbis-
                                                    disodium salt,
                                                    compound with 2-
                                                    aminoethanol (1:2).
P-00-0156........        10/01/10        09/07/10  (S) L-aspartic acid,
                                                    N,N'-1,2-
                                                    ethanediylbis-
                                                    trisodium salt,
                                                    compound with 2-
                                                    aminoethanol (1:1).
P-07-0353........        10/07/10        08/28/10  (G) Alkyl acid
                                                    fluoride.
P-08-0486........        10/05/10        09/17/10  (G) Polymer with
                                                    .alpha.-hydro-
                                                    .omega.-
                                                    hydroxypoly[oxy(meth
                                                    yl-1,2-ethanediyl)],
                                                    3-hydroxy-2-
                                                    (hydroxymethyl)-2-
                                                    methylpropanoic acid
                                                    and
                                                    alkyldiisocyanate,
                                                    ammonium salt.
P-09-0083........        10/04/10        09/03/10  (G) Cationic
                                                    polyamide.
P-09-0084........        09/22/10        09/02/10  (G) Benzenesulfonic
                                                    acid salt.

[[Page 71693]]


P-09-0146........        10/01/10        09/28/10  (S) Formaldehyde,
                                                    polymers with
                                                    acetone-phenol
                                                    reaction products
                                                    and phenol, sodium
                                                    salts.
P-09-0288........        09/22/10        08/21/10  (G) Alkyl
                                                    silsesquioxanes.
P-09-0430........        10/04/10        09/14/10  (G) Polymeric monoazo
                                                    compound.
P-09-0431........        10/04/10        09/14/10  (G) Polymeric monoazo
                                                    compound.
P-09-0432........        10/04/10        09/14/10  (G) Polymeric monoazo
                                                    triphenylmethane.
P-09-0433........        10/04/10        09/14/10  (G) Polymeric
                                                    triphenylmethane.
P-09-0558........        09/27/10        09/10/10  (G) Modified ketal.
P-09-0610........        09/22/10        09/01/10  (G) Alkylbenzene
                                                    sulfonic acid.
P-10-0050........        09/29/10        08/30/10  (G) Amine salt.s of
                                                    fatty acids.
P-10-0128........        09/23/10        08/02/10  (S) Siloxanes and
                                                    silicones, di-me, 3-
                                                    hydroxypropyl group-
                                                    terminated,
                                                    ethoxylated,
                                                    polymers with 1,6-
                                                    diisocyanato-2,2,4-
                                                    trimethylhexane, 1,6-
                                                    diisocyanato-2,4,4-
                                                    trimethylhexane,
                                                    polypropylene glycol
                                                    ether with glycerol
                                                    (3:1) and
                                                    polypropylene glycol
                                                    ether with
                                                    pentaerythritol
                                                    (4:1), polypropylene
                                                    glycol mono-bu ether-
                                                    blocked.
P-10-0133........        09/29/10        09/21/10  (G) Alkyl sulfide,
                                                    manuf. of, by-
                                                    products from,
                                                    distn. lights.
P-10-0186........        09/27/10        09/08/10  (G) Alkyl phosphate
                                                    salt.
P-10-0293........        09/21/10        08/23/10  (G) Methacrylate
                                                    copolymer.
P-10-0306........        09/30/10        08/31/10  (G) Unsaturated
                                                    polyester resin.
P-10-0325........        10/07/10        09/20/10  (G) Neodymium ziegler-
                                                    natta catalyst.
P-10-0388........        10/06/10        08/23/10  (G) 2-propenoic acid,
                                                    2-methyl-, polymer
                                                    with alkyl 2-
                                                    propenoates, ethenyl
                                                    acetate and methyl-2-
                                                    methyl-2-propenoate.
P-10-0389........        10/04/10        09/08/10  (G) Amino acid, N-(2-
                                                    aminoalkyl)-, salt.
                                                    (1:1), polymers with
                                                    cycloaliphatic
                                                    diamine,
                                                    alkyldiisocyanate,
                                                    alpha-hydro-omega-
                                                    hydroxy(alkyldiyl)
                                                    and polyalkyl glycol
                                                    mono alkyl ether
                                                    blocked,
                                                    alkyldiisocyanate-
                                                    aromatic
                                                    diisocyanate,
                                                    polyalkyl glycol
                                                    mono alkyl ether
                                                    blocked.
P-10-0394........        10/07/10        09/28/10  (G) Aromatic
                                                    carboxylic acid.
P-10-0395........        10/07/10        10/01/10  (G) Organic
                                                    carboxylic acid.
P-10-0417........        09/22/10        09/21/10  (S) Amines, C36-
                                                    alkylenedi-,
                                                    polymers with 5,5'-
                                                    [(1-
                                                    methylethylidene)bis
                                                    (4,1-
                                                    phenyleneoxy)]bis[1,
                                                    3-
                                                    isobenzofurandione],
                                                    maleated.
P-10-0430........        10/06/10        09/28/10  (G) Urethane
                                                    acrylate.
------------------------------------------------------------------------

    If you are interested in information that is not included in these 
tables, you may contact the person listed under FOR FURTHER INFORMATION 
CONTACT to access additional non-CBI information that may be available.

List of Subjects

    Environmental protection, Chemicals, Hazardous substances, Imports, 
Notice of commencement, Premanufacturer, Reporting and recordkeeping 
requirements, Test marketing exemptions.

    Dated: November 17, 2010.
Darryl S. Ballaard,
Acting Director, Information Management Division, Office of Pollution 
Prevention and Toxics.
[FR Doc. 2010-29674 Filed 11-23-10; 8:45 am]
BILLING CODE 6560-50-P

