

[Federal Register: December 21, 2005 (Volume 70, Number 244)]
[Notices]               
[Page 75813-75817]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr21de05-52]                         

-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OPPT-2005-0462; FRL-7754-3]

 
Certain New Chemicals; Receipt and Status Information

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires 
any person who intends to manufacture (defined by statute to include 
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to 
notify EPA and comply with the statutory provisions pertaining to the 
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of 
TSCA, EPA is required to publish a notice of receipt of a 
premanufacture notice (PMN) or an application for a test marketing 
exemption (TME), and to publish periodic status reports on the 
chemicals under review and the receipt of notices of commencement to 
manufacture those chemicals. This status report, which covers the 
period from November 8, 2005 to November 16, 2005, consists of the PMNs 
and TMEs, both pending or expired, and the notices of commencement to 
manufacture a new chemical that the Agency has received under TSCA 
section 5 during this time period.

DATES: Comments identified by the docket ID number EPA-HQ-OPPT-2005-
0462 and the specific PMN number or TME number, must be received on or 
before January 20, 2006.

ADDRESSES: Comments may be submitted electronically, by mail, or 
through hand delivery/courier. Follow the detailed instructions as 
provided in Unit I. of the SUPPLEMENTARY INFORMATION.

FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator, 
Environmental Assistance Division, Office of Pollution Prevention and 
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania 
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404; 
e-mail address: TSCA-Hotline@epa.gov.

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

    This action is directed to the public in general. As such, the 
Agency has not attempted to describe the specific entities that this 
action may apply to. Although others may be affected, this action 
applies directly to the submitter of the premanufacture notices 
addressed in the action. If you have any questions regarding the 
applicability of this action to a particular entity, consult the person 
listed under FOR FURTHER INFORMATION CONTACT.

B. How Can I Get Copies of this Document and Other Related Information?

    1. Docket. EPA has established an official public docket for this 
action under docket identification (ID) number EPA-HQ-OPPT-2005-0462. 
The official public docket consists of the documents specifically 
referenced in this action, any public comments received, and other 
information related to this action. Although a part of the official 
docket, the public docket does not include Confidential Business 
Information (CBI) or other information whose disclosure is restricted 
by statute. The official public docket is the collection of materials 
that is available for public viewing at the EPA Docket Center, Rm. 
B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington, 
DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday 
through Friday, excluding legal holidays. The EPA Docket Center Reading 
Room telephone number is (202) 566-1744, and the telephone number for 
the OPPT Docket, which is located in the EPA Docket Center, is (202) 
566-0280.
    2. Electronic access. You may access this Federal Register document 
electronically through the EPA Internet under the ``Federal Register'' 
listings at http://www.epa.gov/fedrgstr/.

    EDOCKET, EPA's electronic public docket and comment system was 
replaced on November 25, 2005 by an

[[Page 75814]]

enhanced federal-wide electronic docket management and comment system 
located at http://www.regulations.gov/. Follow the on-line 

instructions.
    An electronic version of the public docket is available through 
EPA's electronic public docket and comment system, EPA Dockets. You may 
use EPA Dockets at http://www.epa.gov/edocket/ to submit or view public 

comments, access the index listing of the contents of the official 
public docket, and to access those documents in the public docket that 
are available electronically. Although not all docket materials may be 
available electronically, you may still access any of the publicly 
available docket materials through the docket facility identified in 
Unit I.B.1. Once in the system, select ``search,'' then key in the 
appropriate docket ID number.
    Certain types of information will not be placed in the EPA Dockets. 
Information claimed as CBI and other information whose disclosure is 
restricted by statute, which is not included in the official public 
docket, will not be available for public viewing in EPA's electronic 
public docket. EPA's policy is that copyrighted material will not be 
placed in EPA's electronic public docket but will be available only in 
printed, paper form in the official public docket. To the extent 
feasible, publicly available docket materials will be made available in 
EPA's electronic public docket. When a document is selected from the 
index list in EPA Dockets, the system will identify whether the 
document is available for viewing in EPA's electronic public docket. 
Although not all docket materials may be available electronically, you 
may still access any of the publicly available docket materials through 
the docket facility identified in Unit I.B.1. EPA intends to work 
towards providing electronic access to all of the publicly available 
docket materials through EPA's electronic public docket.
    For public commenters, it is important to note that EPA's policy is 
that public comments, whether submitted electronically or in paper, 
will be made available for public viewing in EPA's electronic public 
docket as EPA receives them and without change, unless the comment 
contains copyrighted material, CBI, or other information whose 
disclosure is restricted by statute. When EPA identifies a comment 
containing copyrighted material, EPA will provide a reference to that 
material in the version of the comment that is placed in EPA's 
electronic public docket. The entire printed comment, including the 
copyrighted material, will be available in the public docket.
    Public comments submitted on computer disks that are mailed or 
delivered to the docket will be transferred to EPA's electronic public 
docket. Public comments that are mailed or delivered to the docket will 
be scanned and placed in EPA's electronic public docket. Where 
practical, physical objects will be photographed, and the photograph 
will be placed in EPA's electronic public docket along with a brief 
description written by the docket staff.

C. How and To Whom Do I Submit Comments?

    You may submit comments electronically, by mail, or through hand 
delivery/courier. To ensure proper receipt by EPA, identify the 
appropriate docket ID number and specific PMN number or TME number in 
the subject line on the first page of your comment. Please ensure that 
your comments are submitted within the specified comment period. 
Comments received after the close of the comment period will be marked 
``late.'' EPA is not required to consider these late comments. If you 
wish to submit CBI or information that is otherwise protected by 
statute, please follow the instructions in Unit I.D. Do not use EPA 
Dockets or e-mail to submit CBI or information protected by statute.
    1. Electronically. If you submit an electronic comment as 
prescribed in this unit, EPA recommends that you include your name, 
mailing address, and an e-mail address or other contact information in 
the body of your comment. Also include this contact information on the 
outside of any disk or CD ROM you submit, and in any cover letter 
accompanying the disk or CD ROM. This ensures that you can be 
identified as the submitter of the comment and allows EPA to contact 
you in case EPA cannot read your comment due to technical difficulties 
or needs further information on the substance of your comment. EPA's 
policy is that EPA will not edit your comment, and any identifying or 
contact information provided in the body of a comment will be included 
as part of the comment that is placed in the official public docket, 
and made available in EPA's electronic public docket. If EPA cannot 
read your comment due to technical difficulties and cannot contact you 
for clarification, EPA may not be able to consider your comment.
    i. EPA Dockets. Your use of EPA's electronic public docket to 
submit comments to EPA electronically is EPA's preferred method for 
receiving comments. Go directly to EPA Dockets at http://www.epa.gov/edocket/
, and follow the online instructions for submitting comments. 

Once in the system, select ``search,'' and then key in docket ID number 
EPA-HQ-OPPT-2005-0462. The system is an ``anonymous access'' system, 
which means EPA will not know your identity, e-mail address, or other 
contact information unless you provide it in the body of your comment.
    ii. E-mail. Comments may be sent by e-mail to oppt.ncic@epa.gov, 
Attention: Docket ID Number EPA-HQ-OPPT-2005-0462 and PMN Number or TME 
Number. In contrast to EPA's electronic public docket, EPA's e-mail 
system is not an ``anonymous access'' system. If you send an e-mail 
comment directly to the docket without going through EPA's electronic 
public docket, EPA's e-mail system automatically captures your e-mail 
address. E-mail addresses that are automatically captured by EPA's e-
mail system are included as part of the comment that is placed in the 
official public docket, and made available in EPA's electronic public 
docket.
    iii. Disk or CD ROM. You may submit comments on a disk or CD ROM 
that you mail to the mailing address identified in Unit I.C.2. These 
electronic submissions will be accepted in WordPerfect or ASCII file 
format. Avoid the use of special characters and any form of encryption.
    2. By mail. Send your comments to: Document Control Office (7407M), 
Office of Pollution Prevention and Toxics (OPPT), Environmental 
Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-
0001.
    3. By hand delivery or courier. Deliver your comments to: OPPT 
Document Control Office (DCO) in EPA East Bldg., Rm. 6428, 1201 
Constitution Ave., NW., Washington, DC. Attention: Docket ID Number 
EPA-HQ-OPPT-2005-0462 and PMN Number or TME Number. The DCO is open 
from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. 
The telephone number for the DCO is (202) 564-8930.

D. How Should I Submit CBI to the Agency?

    Do not submit information that you consider to be CBI 
electronically through EPA's electronic public docket or by e-mail. You 
may claim information that you submit to EPA as CBI by marking any part 
or all of that information as CBI (if you submit CBI on disk or CD ROM, 
mark the outside of the disk or CD ROM as CBI and then identify 
electronically within the disk or CD ROM the specific information that 
is CBI). Information so marked will not be disclosed except in 
accordance with procedures set forth in 40 CFR part 2.

[[Page 75815]]

    In addition to one complete version of the comment that includes 
any information claimed as CBI, a copy of the comment that does not 
contain the information claimed as CBI must be submitted for inclusion 
in the public docket and EPA's electronic public docket. If you submit 
the copy that does not contain CBI on disk or CD ROM, mark the outside 
of the disk or CD ROM clearly that it does not contain CBI. Information 
not marked as CBI will be included in the public docket and EPA's 
electronic public docket without prior notice. If you have any 
questions about CBI or the procedures for claiming CBI, please consult 
the technical person listed under FOR FURTHER INFORMATION CONTACT.

E. What Should I Consider as I Prepare My Comments for EPA?

    You may find the following suggestions helpful for preparing your 
comments:
    1. Explain your views as clearly as possible.
    2. Describe any assumptions that you used.
    3. Provide copies of any technical information and/or data you used 
that support your views.
    4. If you estimate potential burden or costs, explain how you 
arrived at the estimate that you provide.
    5. Provide specific examples to illustrate your concerns.
    6. Offer alternative ways to improve the notice or collection 
activity.
    7. Make sure to submit your comments by the deadline in this 
document.
    8. To ensure proper receipt by EPA, be sure to identify the docket 
ID number assigned to this action and the specific PMN number you are 
commenting on in the subject line on the first page of your response. 
You may also provide the name, date, and Federal Register citation.

II. Why is EPA Taking this Action?

    Section 5 of TSCA requires any person who intends to manufacture 
(defined by statute to include import) a new chemical (i.e., a chemical 
not on the TSCA Inventory to notify EPA and comply with the statutory 
provisions pertaining to the manufacture of new chemicals. Under 
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a 
notice of receipt of a PMN or an application for a TME and to publish 
periodic status reports on the chemicals under review and the receipt 
of notices of commencement to manufacture those chemicals. This status 
report, which covers the period from November 8, 2005 to November 16, 
2005, consists of the PMNs and TMEs, both pending or expired, and the 
notices of commencement to manufacture a new chemical that the Agency 
has received under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs and TMEs

    This status report identifies the PMNs and TMEs, both pending or 
expired, and the notices of commencement to manufacture a new chemical 
that the Agency has received under TSCA section 5 during this time 
period. If you are interested in information that is not included in 
the following tables, you may contact EPA as described in Unit II. to 
access additional non-CBI information that may be available.
    In Table I of this unit, EPA provides the following information (to 
the extent that such information is not claimed as CBI) on the PMNs 
received by EPA during this period: the EPA case number assigned to the 
PMN; the date the PMN was received by EPA; the projected end date for 
EPA's review of the PMN; the submitting manufacturer; the potential 
uses identified by the manufacturer in the PMN; and the chemical 
identity.

                                            I. 15 Premanufacture Notices Received From: 11/08/05 to 11/16/05
--------------------------------------------------------------------------------------------------------------------------------------------------------
                                                              Projected Notice End
              Case No.                    Received Date               Date           Manufacturer/Importer           Use                  Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-06-0121                            11/08/05                02/06/06                Zeon Chemicals L.P.    (S) automotive timing  (G) modified
                                                                                                             belts; oilfield        acrylonitrile
                                                                                                             wellhead seals, blow   butadiene polymer
                                                                                                             out preventers
P-06-0122                            11/08/05                02/05/06                CBI                    (G) Destructive use    (G) Base oil
P-06-0123                            11/08/05                02/05/06                CBI                    (G) Open, non-         (G)
                                                                                                             dispersive use         Cuprate[[[[[[(substi
                                                                                                                                    tuted)
                                                                                                                                    sulfonaphtalenyl]-
                                                                                                                                    azo]-
                                                                                                                                    substitutedphenyl]-
                                                                                                                                    sulfonyl] -ethyl]-
                                                                                                                                    glycinato], sodium
                                                                                                                                    salts
P-06-0124                            11/08/05                02/05/06                Cytec Industries Inc.  (G) Sulfide mineral    (G) Modified
                                                                                                             processing reagent     thionocarbamate
P-06-0125                            11/08/05                02/05/06                CBI                    (G) Surfactant         (G) Benzoic acid
                                                                                                                                    (substituted)-, akyl
                                                                                                                                    vegetable oil
                                                                                                                                    derivatives
P-06-0127                            11/14/05                02/11/06                Esprix Technologies    (G) Polymer reactant   (G) Modified butyl
                                                                                                                                    acrylate
P-06-0128                            11/15/05                02/12/06                CBI                    (G) Fuel additive      (G) Iron-based
                                                                                                                                    organic complex
P-06-0129                            11/15/05                02/12/06                CBI                    (G) Open-non-          (G) Alkylpolysulfide
                                                                                                             dispersive use
P-06-0130                            11/15/05                02/04/06                CBI                    (G) Open-non-          (G) Alkylpolysulfide
                                                                                                             dispersive use
P-06-0131                            11/15/05                02/12/06                Shin-Etsu Silicones    (S) Additive of        (S) Siloxanes and
                                                                                      of America Inc.        adhesives for          silicones, hydroxy
                                                                                                             building materials     me, 3-hydroxypropyl
                                                                                                                                    me, me (1-
                                                                                                                                    oxooctyl)oxy, esters
                                                                                                                                    with C12	20 fatty
                                                                                                                                    acids, ethers with
                                                                                                                                    polyethylene-
                                                                                                                                    polypropylene glycol
                                                                                                                                    mono-bu ether
P-06-0132                            11/15/05                02/12/06                CBI                    (G) Polymer for        (G) 2-propenoic acid,
                                                                                                             waterborne paints      aklyl-, polymer with
                                                                                                                                    ethenylbenzene,
                                                                                                                                    alkyl propenoates, 2-
                                                                                                                                    hydroxyalkyl
                                                                                                                                    propenoate,
                                                                                                                                    alkylperoxoate-
                                                                                                                                    initiated, compounds
                                                                                                                                    with aminoalkanol

[[Page 75816]]


P-06-0133                            11/15/05                02/12/06                CBI                    (G) Polymer for        (G) 2-propenoic acid,
                                                                                                             waterborne paints      alkyl-, alkyl ester,
                                                                                                                                    polymer with alkyl
                                                                                                                                    propenoate and
                                                                                                                                    oxiranylalkyl
                                                                                                                                    propenoate
P-06-0134                            11/15/05                02/12/06                Degussa Corporation    (S) Hotmelts for the   (G) Polyester of
                                                                                                             automotive industry;   aliphatic/aromatic
                                                                                                             hotmelts for the       dicarboxylic acid,
                                                                                                             woodworking industry   alkane diol and
                                                                                                                                    ester diol
P-06-0135                            11/14/05                02/11/06                Eliokem, Inc.          (G) Resin for imaging  (S) Tert-
                                                                                                             application            dodecanethiol,
                                                                                                                                    telomer with 2-
                                                                                                                                    propenoic acid, 2-
                                                                                                                                    ethylhexyl ester and
                                                                                                                                    ethenylbenzene
P-06-0136                            11/16/05                02/13/06                PPG Industries, Inc.   (G) Component of an    (G) Cycloaliphatic
                                                                                                             industrial coating     acid, alkyl
                                                                                                                                    substituted-, mixed
                                                                                                                                    esters with
                                                                                                                                    cycloaliphatic acid
                                                                                                                                    and 2-alkane
                                                                                                                                    substituted
                                                                                                                                    bis(alkanediol)
--------------------------------------------------------------------------------------------------------------------------------------------------------

    In Table II of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the TMEs 
received:

                                        II. 1 Test Marketing Exemption Notice Received From: 11/08/05 to 11/16/05
--------------------------------------------------------------------------------------------------------------------------------------------------------
                                                              Projected Notice End
              Case No.                    Received Date               Date           Manufacturer/Importer           Use                  Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
T-06-0002                            11/16/05                12/30/05                PPG Industries, Inc.   (G) Component of an    (G) Cycloaliphatic
                                                                                                             industrial coating     acid, alkyl
                                                                                                                                    substituted-, mixed
                                                                                                                                    esters with
                                                                                                                                    cycloaliphatic acid
                                                                                                                                    and 2-alkane
                                                                                                                                    substituted
                                                                                                                                    bis(alkanediol)
--------------------------------------------------------------------------------------------------------------------------------------------------------

    In Table III of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the 
Notices of Commencement to manufacture received:

                           III. 16 Notices of Commencement From: 11/08/05 to 11/16/05
----------------------------------------------------------------------------------------------------------------
                                                                Commencement Notice
              Case No.                     Received Date             End Date                  Chemical
----------------------------------------------------------------------------------------------------------------
P-04-0650                             11/09/05                11/04/05                (S) Reaction catalyzed:
                                                                                       Aryl dialkyl phosphate +
                                                                                       H2O odialkyl phosphate +
                                                                                       an aryl acohol acts on
                                                                                       organophosphorus
                                                                                       compounds (such as
                                                                                       paraoxon) including
                                                                                       esters of phosphonic and
                                                                                       phosphinic acid
P-04-0781                             11/08/05                10/31/05                (G) Acrylic polymer
P-05-0348                             11/08/05                10/19/05                (G) Dialkyldiallylsodium
                                                                                       halide with unsaturated
                                                                                       phosphonic acid,
                                                                                       acrylamido alkyl propane
                                                                                       sulfonic acid sodium
                                                                                       salt, and two substituted
                                                                                       monomers.
P-05-0349                             11/08/05                10/19/05                (G) Dialkyldiallylsodium
                                                                                       halide with unsaturated
                                                                                       phosphonic acid,
                                                                                       acrylamido alkyl propane
                                                                                       sulfonic acid sodium
                                                                                       salt, and two substituted
                                                                                       monomers.
P-05-0527                             11/08/05                10/10/05                (G) Polymer of
                                                                                       formaldehyde and
                                                                                       substituted phenols
P-05-0578                             11/10/05                10/15/05                (G) Isocyanate functional
                                                                                       poly carbomoyl
                                                                                       (polyalkylene oxide)
P-05-0600                             11/09/05                10/24/05                (G) Sulfato cycohexene
                                                                                       aliphatic sulfo
                                                                                       substituted imidazole
                                                                                       napthyl salt
P-05-0614                             11/15/05                10/11/05                (S) 1-octanethiol,
                                                                                       manufacturer of, distn.
                                                                                       residues, high-boiling
                                                                                       fraction.
P-05-0615                             11/15/05                10/11/05                (S) 1-octanethiol,
                                                                                       manufacturer of, distn.
                                                                                       residues, low-boiling
                                                                                       fraction.
P-05-0626                             11/15/05                10/11/05                (S) Thiols, C11	13-
                                                                                       tertiary, C12-rich,
                                                                                       manufacturer of, C12-rich
                                                                                       C11	13 alkene-based,
                                                                                       distn. residues, high-
                                                                                       boiling fraction.
P-05-0627                             11/15/05                10/11/05                (S)Thiols, C11	13-
                                                                                       tertiary, C12-rich,
                                                                                       manufacturer of,
                                                                                       propylene tetramer-based,
                                                                                       distn. residues, high-
                                                                                       boiling fraction
P-05-0628                             11/15/05                10/11/05                (S) Thiols, C11	13-
                                                                                       tertiary, C12-rich,
                                                                                       manufacturer of, C12	13
                                                                                       alkenes-based, distn.
                                                                                       residues, middle-boiling
                                                                                       fraction.
P-05-0629                             11/15/05                10/11/05                (S)Definition: Thiols,
                                                                                       C11	13-tertiary, C12-
                                                                                       rich, manufacture of,
                                                                                       propylene tertramer-
                                                                                       based, distn, residues,
                                                                                       middle-boiling fraction.
P-05-0630                             11/15/05                10/11/05                (S)Thiols, C11	13-
                                                                                       tertiary, C12-rich,
                                                                                       manfacturer of, C12-rich
                                                                                       C11	13 alkenes-based,
                                                                                       distn. residues, low
                                                                                       boiling fraction.
P-05-0631                             11/15/05                10/11/05                (S) Thiols, C11	13-
                                                                                       tertiary, C12-rich,
                                                                                       manufacturer of,
                                                                                       propylene tetramer-based,
                                                                                       distn. residues, low
                                                                                       boiling fraction.
P-05-0649                             11/09/05                10/12/05                (G) Benzene,1,1'-
                                                                                       methylenebis[isocyanato-,
                                                                                       polymer with 2-propenoic
                                                                                       acid, 2-hydroxyethyl
                                                                                       ester and lexorez 1180-35
                                                                                       and lexorez 1640-35
----------------------------------------------------------------------------------------------------------------


[[Page 75817]]

List of Subjects

    Environmental protection, Chemicals, Premanufacturer notices.

    Dated: December 13, 2005
Carolyn Thorton,
Acting Director, Information Management Division, Office of Pollution 
Prevention and Toxics.

[FR Doc. 05-24197 Filed 12-20-05; 8:45 am]

BILLING CODE 6560-50-S
