% Perimeter carpet 14 days exposure, daily shower, 10% dissipation daily
% February 2, 2016
% Cecilia Tan


% Setting model parameters
use human_parameters_MRP
QPC = 29; 	% to get QALV = 8.3 L/min @BW = 75 kg
use preg_female_parameters
BWSW=1;		% Set BW to a fixed value
BWST=75;		% Set BW to 75kg
PREG=0;			% Not pregnant
DZONE = 1;		% Turn on dermal exposure
KDIS = 0.1;		% 10% daily dissipation
TSTOP=1000;	%Simulation time in hours

% Dermal exposure
SAF= 0.5;	 	% Fraction of skin in contact with chlorpyrifos.
FAD=1;     	% Fraction of dose available to be absorbed. Values of <1 could be used if pesticide is encapsulated. 
DERM = 65.28;	% dose in ug/kg
D3=7;  %DAYS/WEEK
%P2=16; %HRS/DAY
P2 = 8;	%hours/day
S2=0 ;%OFFSET FROM 0 START TIME (EG IF YOU WANT TO MODEL FROM MIDNIGHT, BUT DOSE AT 8 AM)
%W2=14; %14 day exposure
W2=30;	%30 day exposure

% Inhalation exposure
CONCMGM=0.00089; % Inhalation concentration mg/m3. Value is largest value reported in monitoring data.
D3IN=5;  %DAYS/WEEK
P2IN=2; %HRS/DAY
S2IN=0 ;%OFFSET FROM 0 START TIME (EG IF YOU WANT TO MODEL FROM MIDNIGHT, BUT DOSE AT 8 AM)
%W2IN=28; %28 day exposure
W2IN=1; %1 day exposure

prepare @clear@all
start @NoCallback
simall = [_time _rbcce _urinetcpy _cv*350.6*1000 _cvo*334.5*1000]; 	%conc unit = pg/g

%save simall @file='perimeter_carpet_02022016_8h' @format=ascii
save simall @file='perimeter_carpet_02032016_30day' @format=ascii