% Crack & Crevice hardsurface 30 days exposure, daily shower, 10% dissipation daily
% Average cpfos concentrations in blood = 0.004 ug/L
% August 29, 2016
% Cecilia Tan


% Setting model parameters
use human_parameters_MRP
QPC = 29; 	% to get QALV = 8.3 L/min @BW = 75 kg
use preg_female_parameters
BWSW=1;		% Set BW to a fixed value
BWST=75;		% Set BW to 75kg
PREG=0;			% Not pregnant
DZONE = 1;		% Turn on dermal exposure
KDIS = 0.1;		% 10% daily dissipation
TSTOP=720;	%Simulation time in hours, 30 days

% Dermal exposure
SAF= 0.5;	 	% Fraction of skin in contact with chlorpyrifos.
FAD=1;     	% Fraction of dose available to be absorbed. Values of <1 could be used if pesticide is encapsulated. 
DERM = 7.07;	% dose in ug/kg
D3=7;  %DAYS/WEEK
P2 = 2;	%hours/day
S2=0 ;%OFFSET FROM 0 START TIME (EG IF YOU WANT TO MODEL FROM MIDNIGHT, BUT DOSE AT 8 AM)
W2=30;	%30 day exposure

% Inhalation exposure
CONCMGM=0.00089; % Inhalation concentration mg/m3. Value is largest value reported in monitoring data.
D3IN=5;  %DAYS/WEEK
P2IN=2; %HRS/DAY
S2IN=0 ;%OFFSET FROM 0 START TIME (EG IF YOU WANT TO MODEL FROM MIDNIGHT, BUT DOSE AT 8 AM)
W2IN=1; %1 day exposure

prepare @clear@all
start @NoCallback
simall = [_time _rbcce _urinetcpy _cv*350.6 _cvo*334.5 _blauc*350.6 _blauco*334.5 _blaucavg*350.6 _blaucoavg*334.5]; 	%conc unit = ug/L

save simall @file='CC_hs_08292016' @format=ascii