
[Federal Register Volume 78, Number 139 (Friday, July 19, 2013)]
[Proposed Rules]
[Pages 43115-43118]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2013-17378]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

40 CFR Part 180

[EPA-HQ-OPP-2013-0023; FRL-9392-9]


Receipt of Several Pesticide Petitions Filed for Residues of 
Pesticide Chemicals in or on Various Commodities

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice of filing of petitions and request for comment.

-----------------------------------------------------------------------

SUMMARY: This document announces the Agency's receipt of several 
initial filings of pesticide petitions requesting the establishment or 
modification of regulations for residues of pesticide chemicals in or 
on various commodities.

DATES: Comments must be received on or before August 19, 2013.

ADDRESSES: Submit your comments, identified by docket identification 
(ID) number and the pesticide petition number (PP) of interest as shown 
in the body of this document, by one of the following methods:
     Federal eRulemaking Portal: http://www.regulations.gov. 
Follow the online instructions for submitting comments. Do not submit 
electronically any information you consider to be Confidential Business 
Information (CBI) or other information whose disclosure is restricted 
by statute.
     Mail: OPP Docket, Environmental Protection Agency Docket 
Center (EPA/DC), (28221T), 1200 Pennsylvania Ave. NW., Washington, DC 
20460-0001.
     Hand Delivery: To make special arrangements for hand 
delivery or delivery of boxed information, please follow the 
instructions at http://www.epa.gov/dockets/contacts.html. Additional 
instructions on commenting or visiting the docket, along with more 
information about dockets generally, is available at http://www.epa.gov/dockets.

FOR FURTHER INFORMATION CONTACT: A contact person, with telephone 
number and email address, is listed at the end of each pesticide 
petition summary. You may also reach each contact person by mail at 
Biopesticides and Pollution Prevention Division (BPPD) (7511P) or 
Registration Division (RD) (7505P), Office of Pesticide Programs, 
Environmental Protection Agency, 1200 Pennsylvania Ave. NW., 
Washington, DC 20460-0001.

SUPPLEMENTARY INFORMATION: 

I. General Information

A. Does this action apply to me?

    You may be potentially affected by this action if you are an 
agricultural producer, food manufacturer, or pesticide manufacturer. 
The following list of North American Industrial Classification System 
(NAICS) codes is not intended to be exhaustive, but rather provides a 
guide to help readers determine whether this document applies to them. 
Potentially affected entities may include:
    [emsp14]Crop production (NAICS code 111).
    [emsp14]Animal production (NAICS code 112).
    [emsp14]Food manufacturing (NAICS code 311).
    [emsp14]Pesticide manufacturing (NAICS code 32532).
    If you have any questions regarding the applicability of this 
action to a

[[Page 43116]]

particular entity, consult the person listed at the end of the 
pesticide petition summary of interest.

B. What should I consider as I prepare my comments for EPA?

    1. Submitting CBI. Do not submit this information to EPA through 
regulations.gov or email. Clearly mark the part or all of the 
information that you claim to be CBI. For CBI information in a disk or 
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as 
CBI and then identify electronically within the disk or CD-ROM the 
specific information that is claimed as CBI. In addition to one 
complete version of the comment that includes information claimed as 
CBI, a copy of the comment that does not contain the information 
claimed as CBI must be submitted for inclusion in the public docket. 
Information so marked will not be disclosed except in accordance with 
procedures set forth in 40 CFR part 2.
    2. Tips for preparing your comments. When submitting comments, 
remember to:
    i. Identify the document by docket ID number and other identifying 
information (subject heading, Federal Register date and page number).
    ii. Follow directions. The Agency may ask you to respond to 
specific questions or organize comments by referencing a Code of 
Federal Regulations (CFR) part or section number.
    iii. Explain why you agree or disagree; suggest alternatives and 
substitute language for your requested changes.
    iv. Describe any assumptions and provide any technical information 
and/or data that you used.
    v. If you estimate potential costs or burdens, explain how you 
arrived at your estimate in sufficient detail to allow for it to be 
reproduced.
    vi. Provide specific examples to illustrate your concerns and 
suggest alternatives.
    vii. Explain your views as clearly as possible, avoiding the use of 
profanity or personal threats.
    viii. Make sure to submit your comments by the comment period 
deadline identified.
    3. Environmental justice. EPA seeks to achieve environmental 
justice, the fair treatment and meaningful involvement of any group, 
including minority and/or low-income populations, in the development, 
implementation, and enforcement of environmental laws, regulations, and 
policies. To help address potential environmental justice issues, the 
Agency seeks information on any groups or segments of the population 
who, as a result of their location, cultural practices, or other 
factors, may have atypical or disproportionately high and adverse human 
health impacts or environmental effects from exposure to the pesticides 
discussed in this document, compared to the general population.

II. What action is the Agency taking?

    EPA is announcing its receipt of several pesticide petitions filed 
under section 408 of the Federal Food, Drug, and Cosmetic Act (FFDCA), 
21 U.S.C. 346a, requesting the establishment or modification of 
regulations in 40 CFR part 180 for residues of pesticide chemicals in 
or on various food commodities. The Agency is taking public comment on 
the requests before responding to the petitioners. EPA is not proposing 
any particular action at this time. EPA has determined that the 
pesticide petitions described in this document contain the data or 
information prescribed in FFDCA section 408(d)(2); however, EPA has not 
fully evaluated the sufficiency of the submitted data at this time or 
whether the data support granting of the pesticide petitions. After 
considering the public comments, EPA intends to evaluate whether and 
what action may be warranted. Additional data may be needed before EPA 
can make a final determination on these pesticide petitions.
    Pursuant to 40 CFR 180.7(f), a summary of each of the petitions 
that are the subject of this document, prepared by the petitioner, is 
included in a docket EPA has created for each rulemaking. The docket 
for each of the petitions is available online at http://www.regulations.gov.
    As specified in FFDCA section 408(d)(3), 21 U.S.C. 346a(d)(3), EPA 
is publishing notice of the petition so that the public has an 
opportunity to comment on this request for the establishment or 
modification of regulations for residues of pesticides in or on food 
commodities. Further information on the petition may be obtained 
through the petition summary referenced in this unit.

New Tolerance

    1. PP 2E8083. (EPA-HQ-OPP-2012-0791). Interregional Research 
Project Number 4 (IR-4), IR-4 Project Headquarters, 500 College Rd. 
East, Suite 201 W., Princeton, NJ 08540, requests to establish 
tolerances in 40 CFR part 180 for residues of the herbicide linuron, 
(3-(3,4-dichlorophenyl)-1-methoxy-1-methylurea), and its metabolites 
convertible to 3,4-dichloroaniline, calculated as linuron, in or on 
cilantro, dried leaves at 27 parts per million (ppm); cilantro, fresh 
leaves at 3.0 ppm; coriander, seed at 0.01; dill, oil at 4.8 ppm; dill, 
seed at 0.3 ppm; dillweed, dried leaves at 7.1 ppm; dillweed, fresh 
leaves at 1.5 ppm; horseradish at 0.05 ppm; parsley, dry leaves at 8.3 
ppm; parsley, leaves at 3.0 ppm; and pea, dry, seed at 0.08 ppm. 
Adequate enforcement methods are available for the determination of 
linuron in plant and animal commodities. A gas chromatography/mass 
spectroscopy (GC/MS) detection method involves hydrolysis of linuron 
and all metabolites by alkaline reflux to 3,4-dichloroaniline, followed 
by distillation of the 3,4-dichloroaniline into an acid solution. A 
second method involves extraction of linuron and metabolites using 
methanol and clean-up of the extract by using an ENVI-Carb solid phase 
extraction (SPE) column, elution of linuron and its metabolites using 
methanol followed by methanol-toluene, and concentration of the eluate. 
The eluate is dissolved in methanol, filtered, and analyzed for linuron 
and its metabolites using reversed phase high pressure liquid 
chromatography (HPLC) with MS/MS detection. Contact: Laura Nollen, 
(RD), (703) 305-7390, email address: nollen.laura@epa.gov.
    2. PP 3E8170. (EPA-HQ-OPP-2013-0235). Interregional Research 
Project Number 4 (IR-4), IR-4 Project Headquarters, 500 College Rd. 
East, Suite 201 W., Princeton, NJ 08540, requests to establish 
tolerances in 40 CFR part 180 for residues of the insecticide 
chlorantraniliprole, 3-bromo-N-[4-chloro-2-methyl-6-[(methylamino)-
carbonyl]phenyl]-1-(3-chloro-2-pyridinyl)-1H-pyrazole-5-carboxamide, in 
or on fruit, stone, group12, except cherry, chickasaw plum, and damson 
plum at 4.0 ppm; nut, tree, group 14-12 at 0.04 ppm; papaya at 4.0 ppm; 
passionfruit at 4.0 ppm; onion, green, subgroup 3-07B at 3.0 ppm; and 
spice, subgroup19B at 40 ppm. Since chlorantraniliprole and its 
metabolic degradates are not of toxicological concern, analytical 
methods are not applicable. Contact: Laura Nollen, (RD), (703) 305-
7390, email address: nollen.laura@epa.gov.
    3. PP 2F8131. (EPA-HQ-OPP-2013-0035). E.I. du Pont de Nemours and 
Co., 1007 Market St., Wilmington, DE 19898, requests to establish 
tolerances in 40 CFR part 180 for residues of the herbicide 
rimsulfuron, in or on sorghum, forage; sorghum, grain; and sorghum, 
stover at 0.01 ppm. The analytical method DuPont-32277 using reversed-
phase high-performance liquid chromatography with electrospray 
ionization and tandem mass

[[Page 43117]]

spectroscopy (HPLC/ESI-MS/MS) detection is used to measure and evaluate 
the chemical rimsulfuron. Contact: Mindy Ondish, (RD), (703) 605-0723, 
email address: ondish.mindy@epa.gov.
    4. PP 2F8132. (EPA-HQ-OPP-2013-0034). E.I. du Pont de Nemours and 
Co., 1007 Market St., Wilmington, DE 19898, requests to establish 
tolerances in 40 CFR part 180 for residues of the herbicide 
nicosulfuron, in or on sorghum, forage at 0.4 ppm; sorghum, grain at 
0.8 ppm; and sorghum, stover at 0.05 ppm. The analytical method DuPont-
32277 using reversed-phase HPLC/ESI-MS/MS detection is used to measure 
and evaluate the chemical nicosulfuron and its metabolite, IN-V9367. 
Contact: Mindy Ondish, (RD), (703) 605-0723, email address: 
ondish.mindy@epa.gov.
    5. PP 3F8179. (EPA-HQ-OPP-2013-0476). Dow AgroSciences, LLC, 9330 
Zionsville Rd., Indianapolis, IN 46268, requests to establish a 
tolerance in 40 CFR part 180 for residues of the insecticide 
methoxyfenozide, including its metabolites and degradates. Compliance 
with the tolerance levels is to be determined by measuring only the 
active ingredient: Methoxyfenozide, (3-methoxy-2-methylbenzoic acid 2-
(3,5-dimethylbenzoyl) -2-(1,1-dimethylethyl) hydrazide), in or on 
pineapple at 0.7 ppm. The proposed tolerance is supported by magnitude 
of residue studies in pineapple. Liquid chromatography-mass 
spectroscopy (LC-MS/MS) detection methodology is available for 
tolerance enforcement. Contact: Olga Odiott, (RD), (703) 308-9369, 
email address: odiott.olga@epa.gov.

Amended Tolerance

    1. PP 2E8083. (EPA-HQ-OPP-2012-0791). Interregional Research 
Project Number 4 (IR-4), IR-4 Project Headquarters, 500 College Rd. 
East, Suite 201 W., Princeton, NJ 08540, requests to amend the 
tolerance in 40 CFR 180.184(c) by deleting the regional tolerance for 
residues of the herbicide linuron, (3-(3,4-dichlorophenyl)-1-methoxy-1-
methylurea) and its metabolites convertible to 3,4-dichloroaniline, 
calculated as linuron, in or on parsley, leaves at 0.25 ppm. Contact: 
Laura Nollen, (RD), (703) 305-7390, email address: 
nollen.laura@epa.gov.
    2. PP 3F8152. (EPA-HQ-OPP-2013-0411). Bayer CropScience, 2 TW 
Alexander Dr., Research Triangle Park, NC 27709, requests to amend the 
tolerance in 40 CFR 180.608 for residues of the insecticide 
spirodiclofen, 3-(2,4-dichlorophenyl)-2-oxo-1-oxaspiro[4,5]dec-3-en-4-
yl ester 2,2-dimethylbutanoate, in or on citrus, oil from 20 ppm to 35 
ppm. Adequate analytical methodology using LC/MS/MS detection is 
available for enforcement purposes. Contact: Rita Kumar, (RD), (703) 
308-8291, email address: kumar.rita@epa.gov.
    3. PP 3F8161. (EPA-HQ-OPP-2013-0477). BASF Corporation, 26 Davis 
Dr., P.O. Box 13528, Research Triangle Park, NC 27709-3528, requests to 
amend the tolerance in 40 CFR 180.666 for residues of the insecticide 
fluxapyroxad (BAS 700 F), 1H-pyrazole-4-carboxamide,3-(difluoromethyl)-
1-methyl-N-(3',4',5'-trifluoro[1,1'-biphenyl]-2-yl)-, its metabolites, 
and degradates, in or on fruit, stone, group 12 from 2.0 ppm to 3.0 
ppm. Independently validated analytical methods have been submitted for 
analyzing residues of parent fluxapyroxad (BAS 700 F) plus metabolites 
M700F008, M700F048, and M700F002 with appropriate sensitivity in/on 
fruit, stone, group 12 crops, represented by cherry, peach, and plum 
for which tolerances have been established. Contact: Olga Odiott, (RD), 
(703) 308-9369, email address: odiott.olga@epa.gov.

New Tolerance Exemption

    1. PP 2E8094. (EPA-HQ-OPP-2013-0265). The Clorox Company (Clorox), 
1221 Broadway, Oakland, CA 94612-1888, requests to establish an 
exemption from the requirement of tolerance for residues of saturated 
aliphatic acyclic linear primary alcohols, aldehydes, and acids, under 
40 CFR 180.940, when used as pesticide inert ingredients (fragrances) 
in pesticide formulations used on food-contact surfaces when applied/
used in indoor residential settings at a maximum rate of 0.025%. 
Because Clorox is petitioning for an exemption from the requirement of 
a tolerance, an enforcement analytical method is not needed. Contact: 
David Lieu, (RD), (703) 305-0079, email address: lieu.david@epa.gov.
    2. PP 2E8116. (EPA-HQ-OPP-2013-0286). OhSo Clean, Inc., 315 Pacific 
Ave., San Francisco, CA 94111, requests to establish an exemption from 
the requirement of a tolerance for residues of copper sulfate 
pentahydrate (Chemical Abstracts Service Registry Number (CAS No.) 
7758-99-8), under 40 CFR 180.940(a), when used as a pesticide inert 
ingredient in antimicrobial pesticide formulations applied to food-
contact surfaces in public eating places, dairy processing equipment, 
and food processing equipment and utensils. An analytical method is not 
required for enforcement purposes since the Agency is establishing an 
exemption from the requirement of a tolerance without any numerical 
limitation. Contact: David Lieu, (RD), (703) 305-0079, email address: 
lieu.david@epa.gov.
    3. PP 2F7998. (EPA-HQ-OPP-2013-0102). Linde Electronics and 
Specialty Gases, One Greenwich St., Suite 100, Stewartsville, NJ 08886, 
requests to establish an exemption from the requirement of a tolerance 
for residues of the insecticide ethyl formate in or on fumigated 
agricultural commodities. The GC analytical method is available to EPA 
for the detection and measurement of the pesticide residues. Contact: 
Cheryl Greene, (BPPD), (703) 308-0352, email address: 
greene.cheryl@epa.gov.
    4. PP 3F8149. (EPA-HQ-OPP-2013-0253). Bayer CropScience LP, 
Biologics, P.O. Box 12014, 2 T.W. Alexander Dr., Research Triangle 
Park, NC 27709, requests to establish an exemption from the requirement 
of a tolerance for residues of the insecticide Streptomyces 
microflavus, strain AQ 6121, in or on all agricultural commodities. The 
petitioner believes no analytical method is needed because it is 
expected that, when used as proposed, Streptomyces microflavus, strain 
AQ 6121, would not result in residues of toxicological concern. 
Contact: Michael Glikes, (BPPD), (703) 305-6231, email address: 
glikes.michael@epa.gov.
    5. PP IN-10547. (EPA-HQ-OPP-2013-0444). Oro-Agri, Inc., 990 Trophy 
Club Dr., Trophy Club, TX 76262, requests to establish an exemption 
from the requirement of a tolerance for residues of sweet orange peel 
tincture (CAS No. 8028-48-6) under 40 CFR 180.910 for pre- and post-
harvest crops when used as a pesticide inert ingredient (surfactant and 
fragrance) when contained at concentrations up to 10% in pesticide 
formulations and applied to agricultural crops, pre-plant through post-
harvest. The petitioner believes no analytical method is needed because 
this information is not required for the establishment of a tolerance 
exemption. Contact: Lisa Austin, (RD), (703) 305-7894, email address: 
austin.lisa@epa.gov.
    6. PP IN-10553. (EPA-HQ-OPP-2013-0284). Syngenta Crop Protection, 
LLC, P.O. Box 18300, Greensboro, NC 27419[hyphen]8300, requests to 
establish an exemption from the requirement of a tolerance for residues 
of polyurethane[hyphen]type polymers (CAS Nos. 
1161844[hyphen]26[hyphen]3, 1161844[hyphen]30[hyphen]9, 
1161844[hyphen]43[hyphen]4, 1161844[hyphen]51[hyphen]4, 
1161844[hyphen]53[hyphen]6, 693252[hyphen]31[hyphen]2, 
162993[hyphen]60[hyphen]4, and 630102[hyphen]86[hyphen]2), under 40 CFR 
180.960, when used as a pesticide inert ingredient (carrier) in or on 
raw agricultural commodities and

[[Page 43118]]

food products. Tolerance exemption descriptors for polymers produced by 
the reaction of either 1,6[hyphen]hexane-diisocyanate; 
2,4,4[hyphen]trimethyl[hyphen]1,6[hyphen] hexanediisocyanate; 
5[hyphen]isocyanato[hyphen]1[hyphen] 
(isocyanatomethyl)[hyphen]1,3,3[hyphen]trimethyIcyclohexane 
(isophoronediisocyanate); 4,4'[hyphen] methylene[hyphen]bis[hyphen]1, 
1'[hyphen]cyclohexanediisocyanate; 
4,4'[hyphen]methylene[hyphen]bis[hyphen]1,1'benzyldiisocyanate; or 
1,3[hyphen]bis[hyphen](2[hyphen]isocyanatopropan[hyphen]2[hyphen]yl)benz
ene with polyethylenglycol and end[hyphen]capped with one or a mixture 
of more than one of octanol, decanol, dodecanol, tetradecanol, 
hexadecanol, octadecanol, and octadec[hyphen]9[hyphen]enol or 
polyethyleneglycol ethers of octanol, decanol, dodecanol, tetradecanol, 
hexadecanol, octadecanol, and octadec[hyphen]9[hyphen]enol. An 
analytical method to determine the molecular weight of the polymer is 
dynamic light scattering. The petitioner believes no analytical method 
is needed because this information is not required for the 
establishment of a tolerance exemption. Contact: William D. Cutchin, 
(RD), (703) 305-7990, email address: cutchin.william@epa.gov.
    7. PP IN-10559. (EPA-HQ-OPP-2013-0383). Evonik Goldschmidt Corp., 
P.O. Box 1299, Hopewell, VA 23860, requests to establish an exemption 
from the requirement of a tolerance for residues of 2,5-furandione, 
polymer with ethenylbenzene, hydrolyzed, 3-(dimethylamino)propyl imide, 
imide with polyethylene-polypropylene glycol 2-aminopropyl Me ether, 
2,2'-(1, 2-diazenediyl)bis[2-methylbutanenitrile]- initiated, minimum 
number average molecular weight (in AMU) 5,816 (CAS No. 1062609-13-5), 
under 40 CFR 180.960, when used as a pesticide inert ingredient 
(functioning as a dispersant) in pesticide formulations. The petitioner 
believes no analytical method is needed because this information is not 
required for the establishment of a tolerance exemption. Contact: David 
Lieu, (RD), (703) 305-0079, email address: lieu.david@epa.gov.
    8. PP IN-10565. (EPA-HQ-OPP-2013-0467). Huntsman Corp., 8600 
Gosling Rd., The Woodlands, TX 77381, requests to establish an 
exemption from the requirement of a tolerance for residues of 
cumenesulfonic acid and its ammonium, calcium, magnesium, potassium, 
sodium, and zinc salts with no limits when used as pesticide inert 
ingredients (surfactants, related adjuvants of surfactants) in 
pesticide formulations under 40 CFR 180.920 and 180.930, in or on all 
the raw agricultural commodities, including the following with Chemical 
Abstracts Service Registry Numbers (CASRNs): Benzenesulfonic acid, 4-
(1-methylethyl)-, sodium salt (15763-76-5); benzenesulfonic acid, 4-(1-
methylethyl)- (16066-35-6); benzenesulfonic acid, 4-(1-methylethyl)-, 
potassium salt (164524-02-1); benzenesulfonic acid, (1-methylethyl)-, 
potassium salt (28085-69-0); benzenesulfonic acid, (1-methylethyl)-, 
sodium salt (1:1) (28348-53-0); benzenesulfonic acid, 2(or 4)-(1-
methylethyl)- (28631-63-2); benzene, (1-methylethyl)-, monosulfo 
deriv., sodium salt (1:1) (32073-22-6); benzenesulfonic acid, (1-
methylethyl)-, ammonium salt (1:1) (37475-88-0); benzenesulfonic acid, 
(1-methylethyl)- (37953-05-2); benzenesulfonic acid, (1-methylethyl)-, 
magnesium salt (90959-88-9). Prior to the submission of this petition 
to add cumenesulfonate CASRNs, the EPA reapproved toluenesulfonate and 
xylenesulfonate hydrotropes in the EPA Decision Documents dated 9/14/
2006 and 6/30/2006. The combined documents are available at http://www.epa.gov/opprd001/inerts/xylenesulfonic.pdf. Huntsman Corp. is 
relying on the information in that combined EPA Decision Document to 
support this petition which includes a chemistry that was also in the 
Screening Information Data Set (SIDS) Initial Assessment Report for 
hdrotropes. The SIDS hydrotropes category included cumenesulfonates, 
toluenesulfonates, and xylenesulfonates. In fact, cumenesulfonate data 
was used to support the reassessment of the toluenesulfonates and 
xylenesulfonates in the EPA Decision Document. Huntsman Corp. does not 
expect the addition of these cumenesulfonate CASRNs to result in 
additional exposure or risk, and no new data is being submitted with 
this petition. The petitioner believes no analytical method is needed 
because this information is not required for the establishment of a 
tolerance exemption. Contact: William D. Cutchin, (RD), (703) 305-7990, 
email address: cutchin.william@epa.gov.

Amended Tolerance Exemption

    1. PP IN-10544. (EPA-HQ-OPP-2013-0210). Akzo Nobel Surface 
Chemistry, LLC, 525 West Van Buren, Chicago, IL 60607-3823, requests to 
amend an exemption from the requirement of a tolerance under 40 CFR 
180.920, 180.930, or 180.960, for residues of [alpha]-alkyl-[omega]-
hydroxypoly (oxypropylene) and/or poly(oxyethylene) polymers where the 
alkyl chain contains a minimum of six carbons, and alkyl-w-hydroxypoly 
(oxypropylene) and/or poly (oxyethylene) polymers where the alkyl chain 
contains a minimum of six carbons, minimum number average molecular 
weight (in AMU) 1,100 in or on the raw agricultural commodity growing 
crops at no limitation. An analytical method is not required for 
enforcement purposes since the Agency is establishing an exemption from 
the requirement of a tolerance without any numerical limitation. 
Contact: William D. Cutchin, (RD), (703) 305-7990, email address: 
cutchin.william@epa.gov.
    2. PP IN-10551. (EPA-HQ-OPP-2013-0381). Akzo Nobel Surface 
Chemistry, LLC, 909 Mueller Dr., Chattanooga, TN 37406, requests to 
revise an existing exemption from the requirement of a tolerance for 
modified acrylic polymers in 40 CFR 180.960. Akzo Nobel Surface 
Chemistry, LLC, is requesting that the exemption be revised to include 
lauryl methacrylate by inserting lauryl methacrylate after hydroxyethyl 
acrylate and before the following text ``and its sodium, potassium, 
ammonium, monoethanolamine and triethanolamine salts; the resulting 
polymer having a minimum number average molecular weight (in amu), 
1200.'' This entry begins with the following: Styrene, copolymers with 
acrylic acid. The petitioner believes no analytical method is needed 
because this information is not required for the establishment of a 
tolerance exemption. Contact: Mark Dow, (RD), (703) 305-5533, email 
address: dow.mark@epa.gov.

List of Subjects

    Environmental protection, Agricultural commodities, Feed additives, 
Food additives, Pesticides and pests, Reporting and recordkeeping 
requirements.

    Dated: July 11, 2013.
Lois Rossi,
Director, Registration Division, Office of Pesticide Programs.
[FR Doc. 2013-17378 Filed 7-18-13; 8:45 am]
BILLING CODE 6560-50-P


