MBI-206 EP

(Alternate Name: VENERATE™)

MASTER LABEL, containing:

Sublabel A: Agricultural Crop Use

Sublabel B: Turf & Ornamental Use 

Sublabel C: Home & Garden Use



EPA Reg. No.: 84059-14	

Manufactured by:	Marrone Bio Innovations, Inc.

			2121 Second St., Suite B-107

			Davis, CA 95618 USA

			1-877-664-4476;   HYPERLINK "http://www.marronebioinnovations.com" 
www.marronebioinnovations.com ; info@marronebio.com



Sublabel A: Agricultural Crop Use



MBI-206 EP

(Alternate Name: VENERATE™)

BIOLOGICAL INSECTICIDE

 (Can Be Used in Organic Production) (For Organic Production)(OMRI
Placeholder)

Active Ingredient: Heat-killed Burkholderiaspp. strain A396 cells 

                                and spent fermentation media	94.46%

Other ingredients: 	5.54%

Total: 	100.00%

*Contains not less than 1,500 Beet Armyworm Killing Units (BAWKU)/mg. 
Note:  The percent active ingredient does not indicate product
performance and potency measurements are not federally standardized.

KEEP OUT OF REACH OF CHILDREN

CAUTION

FIRST AID

If in eyes 

	( Hold eye open and rinse slowly and gently with water for 15 – 20
minutes.

( Remove contact lenses, if present, after the first 5 minutes, then
continue rinsing eye.

( Call a poison control center or doctor for treatment advice. 

HOT LINE NUMBER

Have the product container or label with you when calling a poison
control center or doctor, or going for treatment.  You may also contact
1-800-222-1222 for emergency medical treatment information.



EPA Reg. No.: 84059-14	EPA Est. No.:  XXXXX-XX-XXX

Net Contents: XX

(Batch)(Lot) No: XXXX

Manufactured by:	Marrone Bio Innovations, Inc.

			2121 Second St., Suite B-107

			Davis, CA 95618 USA

			1-877-664-4476;   HYPERLINK "http://www.marronebioinnovations.com" 
www.marronebioinnovations.com ; info@marronebio.com

US Patents No. XXXXX

XXXX® is a registered trademark of Marrone Bio Innovations, Inc.

Marrone Bio Innovations name and logo are registered trademarks of
Marrone Bio Innovations, Inc. 

PRECAUTIONARY STATEMENTS

HAZARDS TO HUMANS AND DOMESTIC ANIMALS - CAUTION.  Causes moderate eye
irritation.  Avoid contact with eyes or clothing.  Wear goggles or
safety glasses.  Wash thoroughly with soap and water after handling and
before eating, drinking, chewing gum, using tobacco or using the toilet.
 Remove and wash contaminated clothing before use.  

PERSONAL PROTECTIVE EQUIPMENT (PPE): Applicators and other handlers must
wear: long-sleeved shirt and long pants, waterproof gloves, shoes plus
socks.  Mixers / loaders and applicators must wear a dust / mist
filtering respirator meeting NIOSH standards of at least N-95, R-95, or
P-95.  Repeated exposure to high concentrations of microbial proteins
can cause allergic sensitization.  Follow manufacturer’s instructions
for cleaning and maintaining PPE.  If there are no such instructions for
washables, use detergent and hot water.  Keep and wash PPE separately
from other laundry.

ENGINEERING CONTROLS:  When handlers use closed systems, enclosed cabs
or aircraft in a manner that meets the requirements listed in the Worker
Protection Standard (WPS) for agricultural pesticides [40 CFR
170.240(d)(4-6)], the handler PPE requirements may be reduced or
modified as specified in the WPS.

IMPORTANT:  When reduced PPE is worn because a closed system is being
used, handlers must be provided all PPE specified above for
“applicators and other handlers” and have such PPE immediately
available for use in an emergency, such as a spill or equipment
breakdown.

USER SAFETY RECOMMENDATIONS:  Users should remove clothing/PPE
immediately if pesticide gets inside.  Then wash thoroughly and put on
clean clothing.  Users should remove PPE immediately after handing this
product.  Wash the outside of gloves before removing.  As soon as
possible, wash thoroughly and change into clean clothing.

ENVIRONMENTAL HAZARDS: For terrestrial uses:  Do not apply directly to
water, or to areas where surface water is present, or to intertidal
areas below the mean high water mark.  Do not contaminate water when
disposing of equipment washwater or rinsate.  See the Directions for Use
section of this label for application instructions that minimize risk to
bees and other beneficial insects, including those used in Integrated
Pest Management (IPM) programs or organic agriculture.  

DIRECTIONS FOR USE

It is a violation of Federal law to use this product in a manner
inconsistent with its labeling.  For any requirements specific to your
State or Tribe, consult the State or Tribal agency responsible for
pesticide regulation.  Do not apply this product in a way that will
contact workers or other persons, either directly or through drift. 
Only protected handlers may be in the area during application.

Agricultural Use Requirements

Use this product only in accordance with its labeling and with the
Worker Protection Standard, 40 CFR Part 170.  This Standard contains
requirements for the protection of agricultural workers on farms,
forests, nurseries, and greenhouses, and handlers of agricultural
pesticides.  It contains requirements for training, decontamination,
notification, and emergency assistance.  It also contains specific
instructions and exceptions pertaining to the statements on this label
about personal protective equipment (PPE), and restricted-entry
interval.  The requirements in this box only apply to uses of this
product that are covered by the Worker Protection Standard. 

Do not enter or allow worker entry into treated areas during the
restricted-entry interval (REI) of 4 hours.

PPE required for early entry to treated areas (that is permitted under
the Worker Protection Standard and that involves contact with anything
that has been treated, such as plants, soil or water), is:  

●	Coveralls

●	Waterproof gloves

●	Shoes plus socks

EXCEPTION: If the product is soil incorporated or soil injected, the
Worker Protection Standard, under certain circumstances, allows workers
to enter the treated area if there will be no contact with anything that
has been treated.

PRODUCT INFORMATION

VENERATE™ is a biological insecticide containing killed cells and
fermentation solids of Burkholderia spp. strain A396 for use on
agricultural crops against the pests listed in the Directions for Use
section. VENERATE™ controls insect pests by enzymatic degradation of
exoskeletal structures and interference with the molting process leading
to mortality through contact and/or ingestion. VENERATE™  controls or
suppresses many foliar feeding pests including caterpillars and foliage
feeding coleopteran and against many soft-bodied insects such as,
aphids, whiteflies and plant sucking mites infesting labeled crops and
plants. For insect control, the concentrate of VENERATE™ must be mixed
with water and applied as a foliar spray with ground or aerial equipment
equipped for conventional insecticide spraying. 

VENERATE™ can be used in either the field or greenhouse for the
control of any labeled pest.

GENERAL USE INSTRUCTIONS – FOR INSECT CONTROL

VENERATE™ is an insecticide for use against listed insects.  Close
scouting and early attention to infestations is highly recommended. 
Proper timing of application targeting newly hatched larvae, nymphs or
immature pests is important for optimal results.

Thorough coverage of infested plant parts is necessary for effective
control. For some crops, directed drop nozzles by ground machine are
required.

Under heavy pest populations, use the higher label rates, shorten the
spray interval, increase the spray volume to improve coverage, and/or
apply in tank mixture with another product that has activity on the
target pest.

Repeat applications at an interval sufficient to maintain control,
usually 3-10 days depending upon plant growth rate, insect and mite
activity, and other factors.  If attempting to control an insect
population with a single application, make the treatment when egg hatch
is essentially complete but before economic damage occurs.

Adjuvants may be used to improve control of insect pests in situations
where achieving uniform plant coverage is difficult such as closed crop
canopy, dense foliage and penetration into waxy leaf surfaces.

Bees and beneficial insects:  

To minimize potential exposure to bees and other pollinating insects, do
not apply while bees are foraging.  

Do not allow product to drift to blooming crops or weeds if bees are
foraging.

Minimize spray drift away from the target area to reduce effects to
other non-target insects.

VENERATE™ has been evaluated for toxicity to non-target insects in a
variety of bioassays and on a variety of crops under various normal
growing conditions. However, testing all beneficial insects, in all
situations, mixtures and combinations, is not feasible.  Prior to
treating entire crop where the release of beneficial insects serve as
part of an Integrated Pest Management (IPM) program, consult with an
extension specialist, a pest control advisor (PCA) or with the product
manufacturer.

VENERATE™ has been evaluated for phytotoxicity on a variety of crops
under various normal growing conditions. However, testing all crop
varieties, in all mixtures and combinations, is not feasible.  Prior to
treating entire crop, test a small portion of the crop for sensitivity.

GROUND AND AERIAL APPLICATION

Apply VENERATE™ in ground and aerial equipment with quantities of
water sufficient to provide thorough coverage of infested plant parts. 
Attention should be given to sprayer speed and calibration, wind speed,
and foliar canopy to ensure adequate spray coverage.

Mixing directions

Important –Fill tank ½ to ¾ of desired amount of water. Start the
mechanical or hydraulic agitation to provide moderate circulation before
adding VENERATE™.  Add the desired volume of VENERATE™ to the mix
tank and the remaining volume of water and continue circulation. 
Maintain circulation while loading and spraying.  Do not mix more
VENERATE™ than can be used in 24 hours.  Use a strainer no finer than
50 mesh in conventional spray systems.

Tank mixing

Do not combine VENERATE™ in the spray tank with other pesticides,
surfactants, adjuvants, or fertilizers if there has been no previous
experience or use of the combination to show it is physically
compatible, effective, or non-injurious under your use conditions.

To ensure compatibility of tank-mix combinations they must be evaluated
prior to use.  To determine the physical compatibility of this product
with other products use a jar test.  Using a quart jar, add the
proportionate amounts of the products to one quart of water with
agitation.  Add dry formulations first, then flowables second, then
emulsifiable concentrates last.  After thoroughly mixing, let this
mixture stand for 5 minutes.  If the combination remains mixed or can
readily be remixed, it is physically compatible.  Once compatibility has
been proven, use the same procedure for adding required ingredients to
the spray tank.

Row Crop Application

Use calibrated power-operated ground equipment capable of providing
uniform coverage of the target crop.  Orient the boom and nozzles to
obtain uniform crop coverage.  A minimum of 10 gallons per acre by
ground or 5 gallons by aerial application should be utilized, increasing
volume with crop size and/or pest pressure.  Use hollow cone, disc
core/hollow cone or twin jet flat fan nozzles suitable for insecticide
spraying.  Under certain conditions, drop nozzles may be required to
obtain complete coverage of plant surfaces.  Follow manufacturer’s
recommendations for ideal nozzle spacing and spray pressure and minimize
boom height to optimize uniformity of coverage and maximize deposition
to reduce drift.

Orchard Spraying

Dilute spray application: This application method is based on the
premise that all plant parts are thoroughly wetted, to the point of
runoff, with spray solution.  To determine the number of gallons of
dilute spray per acre, contact your extension specialist, state
agricultural experiment station, or certified pest control advisor for
assistance.

Concentrate spray application: This application method is based on the
premise that all plant parts are uniformly covered with spray solution
but not to the point of runoff as with a dilute spray.  Instead, a lower
spray volume is used to deliver the same application rate of product per
acre as is used for the dilute spray. 

Do not spray when wind speed favors drift beyond the area intended for
use.  

Avoiding spray drift is the responsibility of the applicator. 

AERIAL APPLICATION AND DRIFT REDUCTION ADVISORY INFORMATION

General:  Apply in a spray volume of 5 or more gallons per acre on row
crops and 10 or more gallons per acre on tree or orchard crops.  Insect
control by aerial application may be less than control by ground
application because of reduced coverage.

Spray drift: Avoiding spray drift at the application site is the
responsibility of the applicator.  The Interaction of many equipment and
weather related factors determine the potential for spray drift.  The
applicator and the grower are responsible for considering all these
factors when making decisions.  Where states have more stringent
regulations, they should be observed.  Note:  This section is advisory
in nature and does not supersede the mandatory label requirements.

Information on droplet size:  The most effective way to reduce drift
potential is to apply large droplets.  The best drift management
strategy is to apply the largest droplets that will provide sufficient
coverage and control.  Applying larger droplets reduces drift potential,
but will not prevent drift if applications are made improperly, or under
unfavorable environmental conditions (see Wind, Temperature and
Humidity, and Temperature Inversions).

Controlling droplet size: Use high flow rate nozzles to apply the
highest practical spray volume.  Nozzles with higher rated flows produce
larger droplets.  Pressure - Do not exceed the nozzle manufacturer's
recommended pressures.  For many nozzle types lower pressure produces
larger droplets.  When high flow rates are needed, use higher flow rate
nozzles instead of increasing pressure.  Number of nozzles - Use the
minimum number of nozzles that provide uniform coverage.  Nozzle
Orientation - Orienting nozzles so that the spray is released parallel
to the airstream produces larger droplets than other orientations and is
the recommended practice.  Significant deflection from horizontal will
reduce droplet size and increase drift potential.  Nozzle Type - Use a
nozzle type that is designed for the intended application.  With most
nozzle types, narrower spray angles produce larger droplets.  Use
low-drift nozzles, such as solid stream nozzles that are oriented
straight back to produce the largest droplets and the lowest drift.  

Boom width: For aerial applications, the boom width must not exceed 75%
of the wingspan or 90% of the rotary blade.  Use upwind swath
displacement and apply only when wind speed is 3-10 mph as measured by
an anemometer.  Use medium or coarser spray according to ASAE 572
definition for standard nozzles or VMD for spinning atomizer nozzles. 
If application includes a no-spray zone, do not release spray at a
height greater than 10 feet above the ground or crop canopy.

Application height: Do not make application at a height greater than 10
feet above the top of the largest plants unless a greater height is
required for aircraft safety.  Making applications at the lowest height
that is safe reduces exposure to droplets to evaporation and wind.

Swath adjustment: When applications are made with a crosswind, the swath
will be displaced downward. Therefore, on the up and downwind edges of
the field, the applicator must compensate for this displacement by
adjusting the path of the aircraft upwind. Swath adjustment distance
should increase, with increasing drift potential (higher wind, smaller
drops, etc.).

Wind: Drift potential is lowest between wind speeds of 2 - 10 mph.
However, many factors, including droplet size and equipment type
determine drift potential at any given speed. Application should be
avoided below 2 mph due to variable wind direction and high inversion
potential. NOTE: Local terrain can influence wind patterns. Every
applicator should be familiar with local wind patterns and how they
affect spray drift.

Temperature and humidity: When making applications in low relative
humidity, set up equipment to produce larger droplets to compensate for
evaporation. Droplet evaporation is most severe when conditions are both
hot and dry.

Temperature inversions: Do not apply during a temperature inversion
because drift potential is high. Temperature inversions restrict
vertical air mixing, which causes small, suspended droplets to remain in
a concentrated cloud. This cloud can move in unpredictable directions
due to the light variable winds common during inversions. Temperature
inversions are characterized by increasing temperatures with altitude
and are common on nights with limited cloud cover and light to no wind.
They begin to form as the sun sets and often continue into the morning.
Their presence can be indicated by ground fog; however, if fog is not
present, inversions can also be identified by the movement of smoke from
a ground source or an aircraft smoke generator. Smoke that layers and
moves laterally in a concentrated cloud (under low wind conditions)
indicates an inversion, while smoke that moves upward and rapidly
dissipates indicates good vertical air mixing.

Sensitive areas: The pesticide should only be applied when the potential
for drift to adjacent sensitive areas (e.g. residential areas, bodies of
water, known habitat for threatened or endangered species, non-target
crops) is minimal (e.g. when wind is blowing away from the sensitive
areas). Do not allow spray to drift from the application site and
contact people, structures people occupy at any time and the associated
property, parks and recreation areas, non-target crops, aquatic and
wetland areas, woodlands, pastures, rangelands, or animals. Do not allow
product to drift to blooming crops or weeds if bees are foraging.
Minimize spray drift away from the target area to reduce effects to
other non-target insects.

SEED TREATMENT APPLICATION

VENERATE™ can be applied as a seed dressing at plant or in commercial
seed treatments for suppression of insect and nematode damage.  Apply
VENERATE™ as a water-based slurry with other registered seed treatment
insecticides, nematicides and fungicides through standard slurry- or
mist-type commercial seed treatment equipment.  

Mixing instructions: Prepare no more mixture than is required for the
immediate operation.  Agitate the solution continuously during mixing
and application.  Mechanical mixing is recommended for proper mixing of
VENERATE™ mixtures. For seed treatment, apply 8 ounces of VENERATE™
per 100 pounds of seed.

VENERATE™ alone: Add ½ of the required amount of water to the mix
tank.  With the agitator running, add the VENERATE™ to the mix tank. 
Continue agitation while adding the remainder of the water.  Begin
application of the solution after the VENERATE™ has completely
dispersed into the mix water.  Maintain agitation until all the mixture
has been applied.

VENERATE™ + tank-mixtures: Add ½ of the required amount of water to
the mix tank.  Start the agitation before adding any tank mix partners. 
In general, tank-mix partners should be added in this order:  wettable
powders, dry flowable formulations, liquid flowable formulations, and
emulsifiable formulations.  Always allow each tank-mix partner to become
completely dispersed before adding the next component.  Maintain
continuous agitation until all components have been dispersed and
throughout the application process.

Note:  When using VENERATE™ in tank-mixtures, all products in water
soluble packaging should be added to the tank before any other tank-mix
partner, including MBI-206 EP.  Allow the water-soluble packaging to
completely dissolve and the product(s) to completely disperse before
adding any other tank-mix partner to the tank.

If using VENERATE™ in a tank mixture with other seed treatment
products, observe all directions for use, crops/sites, use rates,
dilution ratios, precautions, and limitations that appear on the
tank-mix partner label.  No label dosage may be exceeded and the most
restrictive label precautions and limitations must be followed.  This
product should not be mixed with any product which prohibits such
mixing.

For Pre-plant Seed Treatment: Do not use treated seed for food or feed
purposes or process for oil. Treat only those seeds needed for immediate
use, minimizing the interval between treatment and planting. Do not
store excess treated seeds beyond planting time.

For Commercial Seed Treatment: This product does not contain dye and is
not covered by an appropriate tolerance, tolerance exemption, or other
clearance under the Federal Food, Drug and Cosmetic Act. To comply with
40 CFR 153.155, therefore, all seeds treated commercially with this
product must be colored with an EPA-approved dye or colorant of a
suitable color to prevent accidental use as food for man or feed for
animals. The Federal Seed Act requires that bags containing seed treated
with this product shall be labeled with the following information:
“This seed has been treated with Heat-killed Burkholderia spp. strain
A396 cells and spent fermentation media. Do not use for food, feed or
oil purposes.”

SOIL TREATMENT USE DIRECTIONS

VENERATE™  can be applied by soil drench, in-furrow spray, or soil
injection to protect against certain soil-borne insects or nematodes.

In general, VENERATE™  can be applied by the following methods, unless
specified differently in the SELECTED CROPS section:

Soil Drench Applications:  Apply VENERATE™  at a concentration of 1-2
gallons per 100 gallons of water and at a sufficient rate to thoroughly
soak the growing media and root zone.  Multiple drench applications can
be made on a 10 -14 day interval for insect control treatments. 
Nematode control treatments are limited to pre-plant or at-plant soil
drench applications.

Shanked-In and Injected Applications: VENERATE™  can be shanked-in or
injected into the soil alone, or with most types of liquid nutrients. 
Use a jar test to confirm physical compatibility prior to application.

In-Furrow Applications: At planting, apply VENERATE™  as an in-furrow
spray or as a 5-7 inch band (T-band) over an open furrow at the rate of
1-2 gallons per acre, or 7.3 – 19.6 fluid ounces per 1000 feet of row,
according to the chart below. Apply VENERATE™  in 5 - 20 gallons of
water per acre so as the spray is directed over the seed furrow just
before the seeds are covered.

Rate	In-Furrow and T-band Application Rates 

Product per 1000 ft. row.

	30” Rows	32” Rows	34” Rows	36” Rows	38” Rows	40” Rows

1 – 2 gallons per acre	7.3 – 14.7	7.8 – 15.7	8.3 – 16.7	8.8 –
17.6	9.3 – 18.6	9.8 – 19.6



30” = 17,424 row ft./acre, 32” = 16,315 row ft./acre, 34” = 15,374
row ft./acre, 36” = 14,520 row ft./acre, 38” = 13,754 row ft./acre,
40” = 13,068 row ft./acre.

CHEMIGATION USE – DIRECTIONS FOR INSECT CONTROL

Apply this product only through sprinkler including center pivot,
lateral move, end tow, side (wheel) roll, traveler, big gun, solid set,
or hand moved irrigation systems.  Do not apply this product through any
other type of irrigation systems.  Do not connect an irrigation system
(including greenhouse systems) used for pesticide applications to a
public water system.  

Spray preparation

First prepare a suspension of VENERATE™ in a mix tank.  Fill tank ½
to ¾ the desired amount of water.  Start mechanical or hydraulic
agitation.  Add the required amount of MBI-206 EP, and then the
remaining volume of water.  Then set the sprinkler to deliver a minimum
of 0.1 to 0.3 inch of water per acre.  Start sprinkler and uniformly
inject the suspension of VENERATE™ into the irrigation water line so
as to deliver the desired rate per acre.  Inject the suspension of
VENERATE™ with a positive displacement pump into the main line ahead
of a right angle turn to insure adequate mixing.  Any questions on
calibration should be directed to your State Extension Service
Specialists, to equipment manufacturers or other experts.

Do not combine VENERATE™ with pesticides, surfactants or fertilizers
for application through chemigation equipment unless prior experience
has shown the combination physically compatible, effective and
non-injurious under conditions of use.  VENERATE™ has not been fully
evaluated for compatibility with all adjuvants or surfactants.  It is
advisable to conduct a spray compatibility test if a mixture with
adjuvants or surfactants is planned.

General Requirements 

1)	Apply this product only through sprinkler, including center pivot,
lateral move, end tow, side (wheel) roll, traveler, big gun, solid set,
or hand move irrigation systems.  Do not apply this product through any
other type of irrigation system.

2)	Crop injury, lack of effectiveness, or illegal pesticide residues in
the crop can result from non-uniform distribution of treated water. 

3)	If you have questions about calibration, you should contact State
Extension Service specialists, equipment manufacturers or other experts.

4)	Do not connect an irrigation system (including greenhouse systems)
used for pesticide application to a public water system unless the
pesticide label-prescribed safety devices for public water systems are
in place.  

5)	A person knowledgeable of the chemigation system and responsible for
its operation, or under the supervision of the responsible person, shall
shut the system down and make necessary adjustments should the need
arise.

Specific Requirements for Chemigation Systems Connected to Public Water
Systems 

1)	Public water system means a system for the provision to the public of
piped water for human consumption if such system has at least 15 service
connections or regularly serves an average of at least 25 individuals
daily at least 60 days out of the year.

2)	Chemigation systems connected to public water systems must contain a
functional, reduced-pressure zone, backflow preventer (RPZ) or the
functional equivalent in the water supply line upstream from the point
of pesticide introduction.  As an option to the RPZ, the water from the
public water system should be discharged into a reservoir tank prior to
pesticide introduction.  There shall be a complete physical break (air
gap) between the flow outlet end of the fill pipe and the top or
overflow rim of the reservoir tank of at least twice the inside diameter
of the fill pipe.

3)	The pesticide injection pipeline must contain a functional,
automatic, quick-closing check valve to prevent the flow of fluid back
toward the injection pump. 

4)	The pesticide injection pipeline must contain a functional, normally
closed, solenoid-operated valve located on the intake side of the
injection pump and connected to the system interlock to prevent fluid
from being withdrawn from the supply tank when the irrigation system is
either automatically or manually shut down.

5)	The system must contain functional interlocking controls to
automatically shut off the pesticide injection pump when the water pump
motor stops, or in cases where there is no water pump, when the water
pressure decreases to the point where pesticide distribution is
adversely affected.

6)	Systems must use a metering pump, such as a positive displacement
injection pump (e.g., diaphragm pump) effectively designed and
constructed of materials that are compatible with pesticides and capable
of being fitted with a system interlock.

7) 	Do not apply when wind speed favors drift beyond the area intended
for treatment.

Specific Requirements for Sprinkler Chemigation 

1)	The system must contain a functional check valve, vacuum relief valve
and low-pressure drain appropriately located on the irrigation pipeline
to prevent water source contamination from backflow.

2)	The pesticide injection pipeline must contain a functional,
automatic, quick-closing check valve to prevent the flow of fluid back
toward the injection pump. 

3)	The pesticide injection pipeline must also contain a functional,
normally closed, solenoid-operated valve located on the intake side of
the injection pump and connected to the system interlock to prevent
fluid from being withdrawn from the supply tank when the irrigation
system is either automatically or manually shut down.

4)	The system must contain functional interlocking controls to
automatically shut off the pesticide injection pump when the water pump
motor stops.

5)	The irrigation line or water pump must include a functional pressure
switch, which will stop the water pump motor when the water pressure
decreases to the point where pesticide distribution is adversely
affected.

6)	Systems must use a metering pump, such as a positive displacement
injection pump (e.g., diaphragm pump) effectively designed and
constructed of materials that are compatible with pesticides and capable
of being fitted with a system interlock.

7)	Do not apply when wind speed favors drift beyond the area intended
for treatment.

Application Instructions for All Types of Chemigation 

1)	Remove scale, pesticide residues, and other foreign matter from the
chemical supply tank and entire injector system. Flush with clean water.
Failure to provide a clean tank, void of scale or residues may cause
product to lose effectiveness or strength.

2)	Determine the treatment rates as indicated in the directions for use
and make proper dilutions.

3)	Prepare a solution in the chemical tank by filling the tank with the
required water and then adding product as required. Utilize agitation to
keep solution in suspension.

SHAKE WELL BEFORE USE

FOR USE ON THE FOLLOWING CROPS FOR CONTROL OR SUPPRESSION OF INSECTS AND
MITES

Pre-harvest Interval (PHI) = 0 days

________________________________________________________________________
________

Asparagus

2- 8 quarts VENERATE™  per acre

Armyworms

4 – 8 quarts VENERATE™  per acre (Suppression)

Aphids, Stink bugs
________________________________________________________________________
_________

Bananas 

2 – 4 quarts VENERATE™  per acre

Banana skipper, 

4 – 8 quarts VENERATE™  per acre (Suppression)

Stink bugs 

________________________________________________________________________
____________

Bulbs 

Leek, Garlic and onion (bulb and green) 

2 – 8 quarts VENERATE™  per acre

Loopers, omnivorous leafrollers, hornworm, imported cabbageworm,
diamondback moth, green cloverworm, webworm, saltmarsh caterpillar,
armyworms, cutworm, cross-striped cabbageworm, Heliothis

4 – 8 quarts VENERATE™  per acre (Suppression)

Aphids, thrips

________________________________________________________________________
____________

Bushberries 

Blueberry, Currant, Gooseberry, Huckleberry, Elderberry, Juneberry,
Ligonberry, Salal

2 – 8 quarts VENERATE™  per acre

Armyworms, cherry fruitworm, cranberry fruitworm, fireworms,
leafrollers, loopers

4 – 8 quarts VENERATE™  per acre (Suppression)

Aphids, thrips, blueberry blossom weevil

Stink bugs

________________________________________________________________________
____________

Caneberries

Blackberry, Loganberry, Red and Black Raspberry, and Cultivars and/or
hybrids of these

2 – 8 quarts VENERATE™  per acre

Armyworms, green fruitworm, leafrollers, loopers, western raspberry
fruitworm 

4 – 8 quarts VENERATE™  per acre (Suppression)

Aphids, thrips, stink bugs

________________________________________________________________________
___________

Cereal Grains 

Barley, Buckwheat, Grain Amaranth, Milo, Oats, Pearl Millet, Proso
Millet, Rye, Sorghum, Triticale, Wheat

2 – 8 quarts VENERATE™  per acre

Armyworms, corn earworm (headworm), southwestern corn borer, web worms

4 – 8 quarts VENERATE™  per acre (Suppression)

Aphids (including greenbug), thrips, chinch bugs, mites

________________________________________________________________________
____________

Citrus

Grapefruit, Lemons, Limes, Oranges, Tangerines

2 – 8 quarts VENERATE™  per acre

Fruittree leafroller, orangedog, citrus cutworm, citrus leafminer

4 – 8 quarts VENERATE™  per acre

Citrus rust mite, Asian citrus psyllid.

4 – 8 quarts VENERATE™  per acre (Suppression)

Aphids, Florida red scale, twospotted spider mite, Texas citrus mite,
citrus red mite, six-spotted mite, citrus thrips, mealybugs

Stink bugs

________________________________________________________________________
_________

Cranberry 

2 – 8 quarts VENERATE™  per acre

Armyworms, leafrollers, fireworms, loopers, sparganothis fruitworm, 

4 – 8 quarts VENERATE™  per acre (Suppression)

Aphids, thrips, mites, cranberry blossom weevil

________________________________________________________________________
__________

Cole Crops 

Broccoli, Broccoli Raab, Brussels Sprouts, Cabbage, Chinese Broccoli,
Chinese Cabbage (Bok Choy), Chinese Cabbage (Napa), Chinese Mustard
Cabbage (Gai Choy), Cauliflower, Cavalo, Collards, Kale, Kohlrabi,
Mizuna, Mustard Greens, Mustard Spinach, Rape Greens, Turnip Greens 

2 – 8 quarts VENERATE™  per acre

Diamondback moth, cabbage looper, imported cabbageworm, cabbage webworm,
armyworms

4 – 8 quarts VENERATE™  per acre (Suppression)

Whiteflies, thrips, aphids, leafhoppers, plant bugs, mites, billbugs

Swede midge and stink bugs

________________________________________________________________________
____________

Corn (Field Corn, Sweet Corn, Popcorn and Corn Grown for Seed) 

2 – 8 quarts VENERATE™  per acre

Armyworm, European corn borer, southwestern corn borer, western bean
cutworm, corn earworm, 

4 – 8 quarts VENERATE™  per acre (Suppression)

Corn leaf aphid, mites, leafhoppers

Stink bugs

________________________________________________________________________
____________

Cotton

2 – 8 quarts VENERATE™  per acre

European corn borer, cotton bollworm, tobacco budworm, loopers (soybean
and cabbage), saltmarsh caterpillar, armyworms

4 – 8 quarts VENERATE™  per acre (Suppression)

Cotton aphid, leafhoppers, thrips, mites, Lygus 

Stink bugs

________________________________________________________________________
____________

Cucurbit Vegetables 

Cucumber, edible gourds, muskmelon (cantaloupe, muskmelon, etc.),
pumpkin, watermelon, winter and summer squash 

2 – 8 quarts VENERATE™  per acre

Armyworm, cabbage looper, melonworm, pickleworm, rindworm complex

4 – 8 quarts VENERATE™  per acre (Suppression)

Silverleaf whitefly, whiteflies, aphids, thrips, mites

Stink bugs 

Fig 

2 – 8 quarts VENERATE™  per acre

Navel orangeworm

4 – 8 quarts VENERATE™  per acre (Suppression)

Aphids, thrips, 

Stink bugs

________________________________________________________________________
___________

Fruiting Vegetables 

Tomato, Tomatillo, Pepper, Ground Cherry, Pepino, Okra and Eggplant

2 – 8 quarts VENERATE™  per acre

Loopers, hornworm, tomato fruitworm, variegated cutworm, saltmarsh
caterpillar, armyworm, tomato pinworm, European corn borer

4 – 8 quarts VENERATE™  per acre (Suppression)

Aphids, mites, Lygus, pepper weevil, whiteflies, plant bugs, psyllids,
thrips

Stink bugs

________________________________________________________________________
____________

Grape 

2 – 8 quarts VENERATE™  per acre

Grape leaf skeletonizer, grape leafroller, omnivorous leafroller, orange
tortrix, oblique banded leafroller, grape berry moth

4 – 8 quarts VENERATE™  per acre (Suppression)

Pacific spider mite, Willamette Spider Mite, twospotted spider mite,
mealybugs, whiteflies, thrips

Stink bugs

________________________________________________________________________
____________

Herbs, Spices and Mints 

Angelica, balm, basil, borage, burnet, chamomile, catnip, chervil,
chive, clary, coriander, costmary, cilantro, curry, dillweed, horehound,
hyssop, lavender, lemongrass, lovage, marjoram, nasturtium, parsley
(dried), peppermint, rosemary, sage, savory (summer and winter), sweet
bay, tansy, tarragon, thyme, wintergreen, woodruff and wormwood 

2 – 8 quarts VENERATE™  per acre

Loopers, saltmarsh caterpillar and armyworm

4 – 8 quarts VENERATE™  per acre (Suppression)

Aphids, thrips, whiteflies and mites

________________________________________________________________________
____________

Hops and Dried Cones

2 – 8 quarts  VENERATE™  per acre

Armyworms, loopers

4 – 8 quarts  VENERATE™  per acre (Suppression)

Hops, aphid, thrips, whiteflies and mites

________________________________________________________________________
____________

Leafy Vegetables and Leaves of Root and Tuber and Legume Vegetables

Arugula, Beets, Celery, Chervil, Cilantro, Corn Salad, Cress, Dandelion,
Dock, Edible Chrysanthemum, Endive, Fennel, Garden Peas, Head Lettuce,
Leaf Lettuce, Parsley, Purslane, Radicchio, Rhubarb, Spinach, Swiss
Chard, Turnip Greens and Watercress

2– 8 quarts  VENERATE™  per acre

Cabbage looper, diamondback moth, armyworms  

4 – 8 quarts  VENERATE™  per acre (Suppression)

Aphids, whiteflies, thrips, psyllids, mites 

Stink bugs

________________________________________________________________________
____________

Oil Crops 

Canola, Safflower, Sunflower (including sunflower grown for seed)

2 – 8 quarts  VENERATE™  per acre

Armyworm, diamondback moth, looper, saltmarsh caterpillar, Heliothis,
headworm

4 – 8 quarts  VENERATE™  per acre (Suppression)

Aphids, thrips, whiteflies, mites

________________________________________________________________________
___________

Pineapple 

2 – 8 quarts  VENERATE™  per acre

Gummosos-Batracheda Comosae (Hodges), Thecla-Thecla Basilides (Geyr)

________________________________________________________________________
____________

Pome Fruit 

Apples, Crabapple, Loquat, Mayhaw, Pears and Quince

4 – 8 quarts  VENERATE™  per acre

Pear psyllid, Plum curculio

4 – 8 quarts  VENERATE™  per acre (Suppression)

Stink bugs

________________________________________________________________________
__________

Pomegranate

2 – 8 quarts  VENERATE™  per acre

Walnut caterpillar, cankerworm, gypsy moth, variegated leafroller,
redbanded leafroller, tufted apple budmoth, fruittree leafroller,
oriental fruit moth, cutworm, filbert leafroller, oblique banded
leafroller, codling moth, armyworm and twig borer. 

2 – 8 quarts  VENERATE™  per acre (Suppression)

European red mite, twospotted red mite, Pacific spider mite, McDaniel
spider mite 

________________________________________________________________________
____________

Potatoes and Tuberous and Corm Vegetables

Artichoke, Cassava, Chayote Root, Chinese Artichoke, Garden Beet,
Ginger, Jerusalem Artichoke, Potatoes, Sugar Beet, Sweet Potatoes,
Turmeric and Yams 

2 – 8 quarts  VENERATE™  per acre

Armyworms, artichoke plume moth, European corn borer, loopers 	

4 – 8 quarts  VENERATE™  per acre

Psyllids.

4 – 8 quarts  VENERATE™  per acre (Suppression)

Aphids, potato aphid, whiteflies

Stink bugs.

________________________________________________________________________
____________

Root Vegetables 

Black Salsify, Carrot, Celeriac, Chicory, Edible Burdock, Ginseng,
Horseradish, Parsnip, Radish, Oriental Radish, Rutabaga, Salsify,
Skirret, Spanish Salsify, Turnip, Turnip-rooted Chervil, and Turnip
Rooted Parsley 

2 – 8 quarts  VENERATE™  per acre

Armyworms, European corn borer, loopers

4 – 8 quarts  VENERATE™  per acre (Suppression)

Aphids, thrips, whiteflies, mites

________________________________________________________________________
____________

Shade and Ornamental Trees and Forests 

2 – 8 quarts VENERATE™   per acre

Gypsy moth, elm spanworm, tent caterpillar, California oakworm, pine
butterfly, spruce budworm, saddle prominent caterpillar, Douglas fir
tussock moth, western tussock moth, fruittree leafroller, blackheaded
budworm, mimosa webworm, jack pine budworm, saddleback caterpillar,
greenstriped mapleworm, hemlock looper 

4 – 8 quarts VENERATE™  per acre (Suppression)

Mites, aphids, whiteflies, lace bugs 

Stink bugs

________________________________________________________________________
____________

Soybean

2-8 quarts VENERATE™  per acre

Loopers, soybean looper, cabbage looper, green cloverworm, veletbean
caterpillar, armyworm, podworm, corn earworm

4-8 quarts VENERATE™  per acre (Suppression)

Aphids, soybean aphid, potato leafhopper, leafhoppers, whiteflies,
mites, thrips, kudzu bug

________________________________________________________________________
____________

Stone Fruits 

Apricots, Cherry, Nectarine, Peach, Plum, Prune 

2 – 8 quarts VENERATE™  per acre

Green fruitworm, leafrollers (including oblique-banded, fruit tree,
pandemic, redbanded, variegated), oriental fruit moth, redhumped
caterpillar, tent caterpillar, peach twig borer, 

Application timing: optimal timing for peach twig borer and leafrollers
can vary between species and geographic locations.  Monitor moth flights
with pheromone traps and scout regularly to determine larval
populations.  Use a 7-10 day re-treatment schedule to maintain control
if the crop is growing rapidly or if there is heavy pest pressure.  Use
a 3- to 4-day re-treatment schedule at flowering.

4 – 8 quarts  VENERATE™  per acre

Plum curculio

4 – 8 quarts  VENERATE™  per acre (Suppression)

Aphids, mealybugs, thrips, whiteflies, mites, 

Stink bugs

________________________________________________________________________
____________

Strawberry

2 – 8 quarts VENERATE™  per acre

Armyworms and leafrollers

4 – 8 quarts VENERATE™  per acre (Suppression)

Aphids, thrips, Lygus, plant bugs, whiteflies, mites

Stink bugs

________________________________________________________________________
____________

Tobacco

2 – 8 quarts  VENERATE™  per acre

Hornworm, tobacco budworm, looper

4 – 8 quarts  VENERATE™  per acre (Suppression)

Aphids, thrips, whiteflies, mites

________________________________________________________________________
____________

Tree Farms and Plantations 

Conifers, Including Christmas Trees and Deciduous Trees

2 – 8 quarts VENERATE™  per acre

Bagworm, fall webworm, gypsy moth, hemlock looper, jackpine budworm,
pine tip moth, redhumped caterpillar, spruce budworm, tent caterpillar,
tussock moths

________________________________________________________________________
____________

Tree Fruits 

Acerola, Atemoya, Avocado, Biriba, Black Sapote, Canistel, Cherimoya,
Custard Apple, Feijoa, Guava, Ilama, Jaboticaba, Kiwi, Longan, Lychee,
Mamey Sapote, Mango, Papaya, Passionfruit, Pulasan, Rambutan, Sapodilla,
Soursop, Spanish Lime, Star Apple, Starfruit, Sugar Apple, Ti Palm
Leaves, Wax Jambu (Wax Apple), White Sapote

 2 – 8 quarts  VENERATE™  per acre

Avocado leafroller, citrus peelminer, cutworms, fruit tree leafroller,
omnivorous leafroller, orange tortrix, western tussock moth

4 – 8 quarts  VENERATE™  per acre (Suppression)

Aphids, thrips, whiteflies, mites

________________________________________________________________________
____________

Tree Nuts and Pistachios

Almond, Cashew, Chestnut, Filbert (Hazelnut), Macadamia, Pecan,
Pistachio, Walnut

2 – 8 quarts  VENERATE™  per acre

Fall webworm, filbert worm, hickory shuckworm, navel orange worm,
oblique banded leafroller, peach twig borer, pecan nut casebearer,
redhumped caterpillar

4 – 8 quarts  VENERATE™  per acre (Suppression)

Aphids, mealybugs, whiteflies, 

FOR USE ON THE FOLLOWING CROPS FOR CONTROL OF SPECIFIED NEMATODES:

Pre-harvest Interval (PHI) = 0 days

________________________________________________________________________
____

Brassica (Cole) Leafy Vegetables

Broccoli, Broccoli Raab, Brussels Sprouts, Cabbage, Chinese Broccoli,
Chinese Cabbage (Bok Choy), Chinese Cabbage (Napa), Chinese Mustard
Cabbage (Gai Choy), Cauliflower, Cavalo Broccolo, Collards, Kale,
Kohlrabi, Mizuna, Mustard Greens, Mustard Spinach, and Rape Greens 

1-2 gallons VENERATE™  per acre  

For control of low to medium infestation levels of nematodes use a
pre-plant or at-plant only in furrow drench application in 50 to 75
gallons of water per ½ acre (100 to 150 gallons of water per acre) or
as an in furrow spray in 5 to 20 gallons per acre.  When very high pest
infestation levels are anticipated or encountered, other effective soil
treatments may be necessary. 

 

Root Knot, Lesion, Ring, Sting and Stunt Nematodes.

________________________________________________________________________
____

Bulb Vegetables

Leek, Garlic, Onion (Bulb and Green) and Shallot

1-2 gallons VENERATE™  per acre

For control of low to medium infestation levels of nematodes, use a
pre-plant or at-plant only in furrow drench application in 50 to 75
gallons of water per ½ acre (100 to 150 gallons of water per acre) or
as an in furrow spray in 5 to 20 gallons per acre.  When very high pest
infestation levels are anticipated or encountered, other effective soil
treatments may be necessary.  

Root Knot, Lesion, Ring, Sting and Stunt Nematodes.

________________________________________________________________________
____

Corn (Field Corn, Sweet Corn, Popcorn and Corn Grown for Seed) 

1-2 gallons VENERATE™  per acre

For control of low to medium infestation levels of nematodes, apply
VENERATE™  as an in furrow or T-band spray in 5 to 20 gallons per acre
according to the SOIL TREATMENT USE DIRECTIONS.  When very high pest
infestation levels are anticipated or encountered, other effective soil
treatments may be necessary.  

Seed Treatment for Corn

For suppression of plant-parasitic nematodes, apply 8 ounces of
VENERATE™  per 100 pounds of seed in accordance with the instructions
presented in the SEED TREATMENT USE DIRECTIONS.

Root Knot, Lesion, Ring, Sting and Stunt Nematodes

Cotton

1-2 gallons VENERATE™  per acre

For control of low to medium infestation levels of nematodes, apply
VENERATE™  as an in furrow or T-band spray in 5 to 20 gallons per acre
according to the SOIL TREATMENT USE DIRECTIONS.  When very high pest
infestation levels are anticipated or encountered, other effective soil
treatments may be necessary.  

Seed treatment for Cotton

For suppression of plant-parasitic nematodes, apply 8 ounces of
VENERATE™  per 100 pounds of seed in accordance with the instructions
presented in the SEED TREATMENT USE DIRECTIONS.

Root Knot Nematodes and reniform nematodes

________________________________________________________________________
____

Cucurbit Vegetables

Cucumber, Edible Gourds, Muskmelon, Cantaloupe, Pumpkin, Watermelon, and
Winter and Summer Squash 

1-2 gallons VENERATE™  per acre

For control of low to medium infestation levels of nematodes, use a
pre-plant or at-plant only in furrow drench application in 50 to 75
gallons of water per ½ acre (100 to 150 gallons of water per acre) or
as an in furrow spray in 5 to 20 gallons per acre.  When very high pest
infestation levels are anticipated or encountered, other effective soil
treatments may be necessary.  

Root Knot, Lesion, Ring, Sting and Stunt Nematodes

________________________________________________________________________
____

Fruiting Vegetables 

Tomato, Tomatillo, Pepper, Groundcherry, Pepino, Okra and Eggplant

1-2 gallons VENERATE™  per acre

For control of low to medium infestation levels of nematodes, use a
pre-plant or at-plant only in furrow drench application in 50 to 75
gallons of water per ½ acre (100 to 150 gallons of water per acre) or
as an in furrow spray in 5 to 20 gallons per acre.  When very high pest
infestation levels are anticipated or encountered, other effective soil
treatments may be necessary.  

Root Knot, Lesion, Ring, Sting and Stunt Nematodes

________________________________________________________________________
____

Leafy Vegetables 

Arugula, Celery, Corn Salad, Cress, Dandelion, Dock, Edible
Chrysanthemum, Endive, Fennel, Head Lettuce, Leaf Lettuce, Parsley,
Purslane, Radicchio, Rhubarb, Spinach and Swiss Chard

1-2 gallons VENERATE™  per acre

For control of low to medium infestation levels of nematodes, use a
pre-plant or at-plant only in furrow drench application in 50 to 75
gallons of water per ½ acre (100 to 150 gallons of water per acre) or
as an in furrow spray in 5 to 20 gallons per acre.  When very high pest
infestation levels are anticipated or encountered, other effective soil
treatments may be necessary.  

Root Knot, Lesion, Ring, Sting and Stunt Nematodes

________________________________________________________________________
____

Soybean

1-2 gallons VENERATE™  per acre

For control of low to medium infestation levels of nematodes, apply
VENERATE™  as an in furrow or T-band spray in 5 to 20 gallons per acre
according to the SOIL TREATMENT USE DIRECTIONS.  When very high pest
infestation levels are anticipated or encountered, other effective soil
treatments may be necessary.  

Seed treatment for Soybean

For suppression of plant-parasitic nematodes, apply 8 ounces of
VENERATE™  per 100 pounds of seed in accordance with the instructions
presented in the SEED TREATMENT USE DIRECTIONS.

________________________________________________________________________
____

Root and Tuber Vegetables

Artichoke, Black Salsify, Carrot, Cassava, Celeriac, Chayote Root,
Chicory, Chinese Artichoke, Edible Burdock, Garden Beet, Ginger,
Ginseng, Horseradish, Jerusalem Artichoke, Oriental Radish, Parsnip,
Potatoes, Radish, Rutabaga, Salsify, Skirret, Spanish Salsify, Sugar
Beet, Sweet Potatoes, Tumeric, Turnip, Turnip-rooted Chervil,
Turnip-rooted Parsley and Yams 

1-2 gallons VENERATE™  per acre

For control of low to medium infestation levels of nematodes, use a
pre-plant or at-plant only in furrow drench application in 50 to 75
gallons of water per ½ acre (100 to 150 gallons of water per acre) or
as an in furrow spray in 5 to 20 gallons per acre.  When very high pest
infestation levels are anticipated or encountered, other effective soil
treatments may be necessary.  

Root Knot, Lesion, Ring, Sting and Stunt Nematodes

________________________________________________________________________
____

Strawberry

1-2 gallons VENERATE™  per acre

For control of low to medium infestation levels of nematodes, use a
pre-plant or at-plant only in furrow drench application in 50 to 75
gallons of water per ½ acre (100 to 150 gallons of water per acre) or
as an in furrow spray in 5 to 20 gallons per acre.  When very high pest
infestation levels are anticipated or encountered, other effective soil
treatments may be necessary.  

Root Knot, Lesion, Ring, Sting and Stunt Nematodes

________________________________________________________________________
____

Tobacco

1-2 gallons VENERATE™  per acre

For control of low to medium infestation levels of nematodes, use a
pre-plant or at-plant only in furrow drench application in 50 to 75
gallons of water per ½ acre (100 to 150 gallons of water per acre) or
as an in furrow spray in 5 to 20 gallons per acre.  When very high pest
infestation levels are anticipated or encountered, other effective soil
treatments may be necessary.  

Root Knot, Lesion, Ring, Sting and Stunt Nematodes

STORAGE AND DISPOSAL

Do not contaminate water, food or feed by storage or disposal.  Use up
product within 6 months of purchase.

Pesticide Storage:  Store in a cool dry place.  Avoid freezing.

Pesticide Disposal:  To avoid wastes, use all material in this
container by application according to label directions.   If wastes
cannot be avoided, offer remaining product to a waste disposal
facility or pesticide disposal program (often such programs are run by
state or local governments or by industry).

Container Handling:  Non-refillable container.  Do not reuse or refill
this container.  Triple rinse container (or equivalent) promptly after
emptying.   Triple rinse as follows:  Empty the remaining contents
into application equipment or a mix tank and drain for 10 seconds after
the flow begins to drip.  Fill the container ¼ full with water and
recap.  Shake for 10 seconds.  Pour rinsate into application equipment
or a mix tank or store rinsate for later use or disposal.  Drain for 10
seconds after the flow begins to drip.  Repeat this procedure two more
times.  Then offer for recycling if available, or puncture and dispose
of in a sanitary landfill or by incineration.  Do not burn unless
allowed by state and local ordinances.

ACRC Logo Placeholder

Marrone Bio Innovations is a member of the Ag Container Recycling
Council. Visit   HYPERLINK "http://www.acrecycle.org/contact.html" 
http://www.acrecycle.org/contact  for information on how to arrange
pick-up of this empty pesticide container.

Marrone Bio Innovations

WARRANTY

To the extent permitted by applicable law, the seller makes no warranty,
expressed or implied, of merchantability, fitness or otherwise
concerning use of this product. The user assumes all risks of use,
storage or handling that are not in strict accordance with the
accompanying directions.



Sublabel B: Turf & Ornamental Use



MBI-206 EP

(Alternate Name: VENERATE™)

BIOLOGICAL INSECTICIDE

 (Can Be Used in Organic Production) (For Organic Production)(For
Organic Lawn Care)(OMRI Placeholder)

Active Ingredient: Heat-killed Burkholderia spp.strain A396 cells and 

                                spent fermentation media	94.46%

Other ingredients: 	5.54%

Total: 	100.00%

*Contains not less than 1,500 Beet Armyworm Killing Units (BAWKU)/mg. 
Note:  The percent active ingredient does not indicate product
performance and potency measurements are not federally standardized.

KEEP OUT OF REACH OF CHILDREN

CAUTION

FIRST AID

If in eyes 

	( Hold eye open and rinse slowly and gently with water for 15 – 20
minutes.

( Remove contact lenses, if present, after the first 5 minutes, then
continue rinsing eye.

( Call a poison control center or doctor for treatment advice. 

HOT LINE NUMBER

Have the product container or label with you when calling a poison
control center or doctor, or going for treatment.  You may also contact
1-800-222-1222 for emergency medical treatment information.



EPA Reg. No.: 84059-14	EPA Est. No.:  XXXXX-XX-XXX

Net Contents: XX

(Batch)(Lot) No: XXXX

Manufactured by:	Marrone Bio Innovations, Inc.

			2121 Second St., Suite B-107

			Davis, CA 95618  USA

			1-877-664-4476;   HYPERLINK "http://www.marronebioinnovations.com" 
www.marronebioinnovations.com ; info@marronebio.com

US Patents No. XXXXX

XXXX® is a trademark of Marrone Bio Innovations, Inc.

Marrone Bio Innovations name and logo are registered trademarks of
Marrone Bio Innovations, Inc. 

PRECAUTIONARY STATEMENTS

HAZARDS TO HUMANS AND DOMESTIC ANIMALS - CAUTION.  Causes moderate eye
irritation.  Avoid contact with eyes or clothing.  Wear goggles or
safety glasses.  Wash thoroughly with soap and water after handling and
before eating, drinking, chewing gum, using tobacco or using the toilet.
 Remove and wash contaminated clothing before use.  

PERSONAL PROTECTIVE EQUIPMENT (PPE): Applicators and other handlers must
wear: long-sleeved shirt and long pants, waterproof gloves, shoes plus
socks.  Mixers / loaders and applicators not in enclosed cabs or
aircraft must wear a dust / mist filtering respirator meeting NIOSH
standards of at least N-95, R-95, or P-95.  Repeated exposure to high
concentrations of microbial proteins can cause allergic sensitization. 
Follow manufacturer’s instructions for cleaning and maintaining PPE. 
If there are no such instructions for washables, use detergent and hot
water.  Keep and wash PPE separately from other laundry.

USER SAFETY RECOMMENDATIONS:  Users should remove clothing/PPE
immediately if pesticide gets inside.  Then wash thoroughly and put on
clean clothing.  Users should remove PPE immediately after handing this
product.  Wash the outside of gloves before removing.  As soon as
possible, wash thoroughly and change into clean clothing.

ENVIRONMENTAL HAZARDS: For terrestrial uses:  Do not apply directly to
water, or to areas where surface water is present, or to intertidal
areas below the mean highwater mark.  Do not contaminate water when
disposing of equipment washwaters or rinsate. See the Directions for Use
section of this label for application instructions that minimize risk to
bees and other beneficial insects, including those used in Integrated
Pest Management (IPM) programs or organic agriculture. 

DIRECTIONS FOR USE

It is a violation of Federal law to use this product in a manner
inconsistent with its labeling.  

Keep unprotected persons out of treated areas until sprays have dried.

PRODUCT INFORMATION

VENERATE™ is a biological insecticide containing killed cells and
fermentation solids of Burkholderia spp. strain A396 for use on
agricultural crops against the pests listed in the Directions for Use
section. VENERATE™ controls insect pests by enzymatic degradation of
exoskeletal structures and interference with the molting process leading
to mortality through contact and/or ingestion. VENERATE™  controls or
suppresses many foliar feeding pests including caterpillars and foliage
feeding coleopteran and against many soft-bodied insects such as,
aphids, whiteflies and plant sucking mites infesting labeled crops and
plants. For insect control, the concentrate of VENERATE™ must be mixed
with water and applied as a foliar spray with ground or aerial equipment
equipped for conventional insecticide spraying. 

GENERAL USE INSTRUCTIONS – FOR INSECT CONTROL

VENERATE™ is an insecticide for use against listed insects.  Close
scouting and early attention to infestations is highly recommended. 
Proper timing of application targeting newly hatched larvae is important
for optimal results.

Thorough coverage of infested plant parts is necessary for effective
control.  VENERATE™ does not have systemic activity.  

Under heavy pest populations, use the higher label rates, shorten the
spray interval, increase the spray volume to improve coverage, and/or
apply in tank mixture with another product that has activity on the
target pest.

Repeat applications at an interval sufficient to maintain control,
usually 3-10 days depending upon plant growth rate, insect and mite
activity, and other factors.  If attempting to control an insect
population with a single application, make the treatment when egg hatch
is essentially complete but before economic damage occurs.

Adjuvants may be used to improve control of insect pests in situations
where achieving uniform plant coverage is difficult such as closed
canopy, dense foliage and penetration into waxy leaf surfaces.

Bees and beneficial insects:  

To minimize potential exposure to bees and other pollinating insects, do
not apply while bees are foraging.  

Do not allow product to drift to blooming crops or weeds if bees are
foraging.

Minimize spray drift away from the target area to reduce effects to
other non-target insects.

 

VENERATE™ has been evaluated for toxicity to non-target insects in a
variety of bioassays and on a variety of crops under various normal
growing conditions. However, testing all beneficial insects, in all
situations, mixtures and combinations, is not feasible.  Prior to
treating an entire field or crop where the release of beneficial insects
serve as part of an Integrated Pest Management (IPM) program, consult
with an extension specialist, a pest control advisor (PCA) or with the
product manufacturer.

VENERATE™ has been evaluated for phytotoxicity on a variety of crops
under various normal growing conditions. However, testing all crop
varieties, in all mixtures and combinations, is not feasible.  Prior to
treating entire crop, test a small portion of the crop for sensitivity.

Mixing directions

Important – Do not add VENERATE™ to the mix tank before introducing
the desired amount of water.  Add water to the mix tank.  Start the
mechanical or hydraulic agitation to provide moderate circulation before
adding VENERATE™.  Add the desired volume of VENERATE™ to the mix
tank and continue circulation.  Maintain circulation while loading and
spraying.  Do not mix more VENERATE™ than can be used in 24 hours. 
Use a strainer no finer than 50 mesh in conventional spray systems.

Tank mixing

Do not combine VENERATE™ in the spray tank with other pesticides,
surfactants, adjuvants, or fertilizers if there has been no previous
experience or use of the combination to show it is physically
compatible, effective, or non-injurious under your use conditions.

To ensure compatibility of tank-mix combinations they must be evaluated
prior to use.  To determine the physical compatibility of this product
with other products use a jar test.  Using a quart jar, add the
proportionate amounts of the products to one quart of water with
agitation.  Add dry formulations first, then flowables, then
emulsifiable concentrates last.  After thoroughly mixing, let this
mixture stand for 5 minutes.  If the combination remains mixed or can be
readily remixed, it is physically compatible.  Once compatibility has
been proven, use the same procedure for adding required ingredients to
the spray tank.

GROUND APPLICATION

Apply VENERATE™ in ground equipment with quantities of water
sufficient to provide thorough coverage of infested plant parts. 
Attention should be given to sprayer speed and calibration, wind speed,
and foliar canopy to ensure adequate spray coverage.  For turf
applications, apply VENERATE™ in a minimum of 1.5 gallons of water per
1000 square feet (65 gallons water per acre).  For foliar applications
using broadcast application equipment apply VENERATE™ in a minimum of
30 gallons of water per acre.  For dilute applications to bedding
plants, trees and shrubs, apply VENERATE™ at a dilution of 2 to 8
quarts per 100 gallons of water. Use of a quality surfactant will aid
performance.  Do not use carrier volumes and/or adjuvants that create
spray runoff or drip-accumulation at the base of the commercial
commodity.

Do not spray when wind speed favors drift beyond the area intended for
use.  

Avoiding spray drift is the responsibility of the applicator. 

CHEMIGATION USE – DIRECTIONS FOR INSECT CONTROL

Apply this product only through sprinkler including center pivot,
lateral move, end tow, side (wheel) roll, traveler, big gun, solid set,
or hand move irrigation systems.  Do not apply this product through any
other type of irrigation systems.  Do not connect an irrigation system
(including greenhouse systems) used for pesticide applications to a
public water system.  

Spray preparation

First prepare a suspension of VENERATE™ in a mix tank.  Fill tank ½
to ¾ the desired amount of water.  Start mechanical or hydraulic
agitation.  Add the required amount of MBI-206 EP, and then the
remaining volume of water.  Then set the sprinkler to deliver a minimum
of 0.1 to 0.3 inch of water per acre.  Start sprinkler and uniformly
inject the suspension of VENERATE™ into the irrigation water line so
as to deliver the desired rate per acre.  Inject the suspension of
VENERATE™ with a positive displacement pump into the main line ahead
of a right angle turn to insure adequate mixing.  Any questions on
calibration should be directed to your State Extension Service
Specialists, to equipment manufacturers or other experts.

Do not combine VENERATE™ with pesticides, surfactants or fertilizers
for application through chemigation equipment unless prior experience
has shown the combination physically compatible, effective and
non-injurious under conditions of use.  VENERATE™ has not been fully
evaluated for compatibility with all adjuvants or surfactants.  It is
advisable to conduct a spray compatibility test if a mixture with
adjuvants or surfactants is planned.

General Requirements 

1)	Apply this product only through sprinkler, including center pivot,
lateral move, end tow, side (wheel) roll, traveler, big gun, solid set,
or hand move irrigation systems.  Do not apply this product through any
other type of irrigation system.

2)	Crop injury, lack of effectiveness, or illegal pesticide residues in
the crop can result from non-uniform distribution of treated water. 

3)	If you have questions about calibration, you should contact State
Extension Service specialists, equipment manufacturers or other experts.

4)	Do not connect an irrigation system (including greenhouse systems)
used for pesticide application to a public water system unless the
pesticide label-prescribed safety devices for public water systems are
in place.  

5)	A person knowledgeable of the chemigation system and responsible for
its operation, or under the supervision of the responsible person, shall
shut the system down and make necessary adjustments should the need
arise.

Specific Requirements for Chemigation Systems Connected to Public Water
Systems 

1)	Public water system means a system for the provision to the public of
piped water for human consumption if such system has at least 15 service
connections or regularly serves an average of at least 25 individuals
daily at least 60 days out of the year.

2)	Chemigation systems connected to public water systems must contain a
functional, reduced-pressure zone, backflow preventer (RPZ) or the
functional equivalent in the water supply line upstream from the point
of pesticide introduction.  As an option to the RPZ, the water from the
public water system should be discharged into a reservoir tank prior to
pesticide introduction.  There shall be a complete physical break (air
gap) between the flow outlet end of the fill pipe and the top or
overflow rim of the reservoir tank of at least twice the inside diameter
of the fill pipe.

3)	The pesticide injection pipeline must contain a functional,
automatic, quick-closing check valve to prevent the flow of fluid back
toward the injection pump. 

4)	The pesticide injection pipeline must contain a functional, normally
closed, solenoid-operated valve located on the intake side of the
injection pump and connected to the system interlock to prevent fluid
from being withdrawn from the supply tank when the irrigation system is
either automatically or manually shut down.

5)	The system must contain functional interlocking controls to
automatically shut off the pesticide injection pump when the water pump
motor stops, or in cases where there is no water pump, when the water
pressure decreases to the point where pesticide distribution is
adversely affected.

6)	Systems must use a metering pump, such as a positive displacement
injection pump (e.g., diaphragm pump) effectively designed and
constructed of materials that are compatible with pesticides and capable
of being fitted with a system interlock.

7) 	Do not apply when wind speed favors drift beyond the area intended
for treatment.

Specific Requirements for Sprinkler Chemigation 

1)	The system must contain a functional check valve, vacuum relief valve
and low-pressure drain appropriately located on the irrigation pipeline
to prevent water source contamination from backflow.

2)	The pesticide injection pipeline must contain a functional,
automatic, quick-closing check valve to prevent the flow of fluid back
toward the injection pump. 

3)	The pesticide injection pipeline must also contain a functional,
normally closed, solenoid-operated valve located on the intake side of
the injection pump and connected to the system interlock to prevent
fluid from being withdrawn from the supply tank when the irrigation
system is either automatically or manually shut down.

4)	The system must contain functional interlocking controls to
automatically shut off the pesticide injection pump when the water pump
motor stops.

5)	The irrigation line or water pump must include a functional pressure
switch, which will stop the water pump motor when the water pressure
decreases to the point where pesticide distribution is adversely
affected.

6)	Systems must use a metering pump, such as a positive displacement
injection pump (e.g., diaphragm pump) effectively designed and
constructed of materials that are compatible with pesticides and capable
of being fitted with a system interlock.

7)	Do not apply when wind speed favors drift beyond the area intended
for treatment.

Application Instructions for All Types of Chemigation 

1)	Remove scale, pesticide residues, and other foreign matter from the
chemical supply tank and entire injector system. Flush with clean water.
Failure to provide a clean tank, void of scale or residues may cause
product to lose effectiveness or strength.

2)	Determine the treatment rates as indicated in the directions for use
and make proper dilutions.

3)	Prepare a solution in the chemical tank by filling the tank with the
required water and then adding product as required. Utilize agitation to
keep solution in suspension.

SHAKE WELL BEFORE USE

FOR USE ON THE FOLLOWING SITES FOR CONTROL OF INSECTS AND MITES

________________________________________________________________________
____________

Ornamentals

Including: Flowering plants, foliage plants, broadleaves, shrubs, trees,
conifers

2 – 8 quarts VENERATE™ per acre

Bagworm, fall webworm, gypsy moth, elm spanworm, tent caterpillar,
California oakworm, pine butterfly, spruce budworm, saddle prominent
caterpillar, Douglas fir tussock moth, western tussock moth, fruittree
leafroller, blackheaded budworm, mimosa webworm, jack pine budworm,
saddleback caterpillar, greenstriped mapleworm, hemlock looper, pine tip
moth, redhumped caterpillar, spruce budworm

4 – 8 quarts VENERATE™ per acre

Mites, aphids, whiteflies, lace bugs 

Stink bugs, black vine weevil - suppression

________________________________________________________________________
____________

Turfgrass and Ornamental grasses

2 – 8 quarts VENERATE™ per acre

Armyworm, cutworm, sod webworm

4 – 8 quarts VENERATE™ per acre

Chinch bug, leafhoppers, annual bluegrass weevil and bluegrass billbug -
suppression

STORAGE AND DISPOSAL

Do not contaminate water, food or feed by storage or disposal. Use up
product within 6 months of purchase.

Pesticide Storage:  Store in a cool dry place.  Avoid freezing.

Pesticide Disposal:  To avoid wastes, use all material in this
container by application according to label directions.   If wastes
cannot be avoided, offer remaining product to a waste disposal
facility or pesticide disposal program (often such programs are run by
state or local governments or by industry).

Container Handling:  Non-refillable container.  Do not reuse or refill
this container.  Triple rinse container (or equivalent) promptly after
emptying.   Triple rinse as follows:  Empty the remaining contents
into application equipment or a mix tank and drain for 10 seconds after
the flow begins to drip.  Fill the container ¼ full with water and
recap.  Shake for 10 seconds.  Pour rinsate into application equipment
or a mix tank or store rinsate for later use or disposal.  Drain for 10
seconds after the flow begins to drip.  Repeat this procedure two more
times.  Then offer for recycling if available, or puncture and dispose
of in a sanitary landfill or by incineration.  Do not burn unless
allowed by state and local ordinances.

ACRC Logo Placeholder

Marrone Bio Innovations is a member of the Ag Container Recycling
Council. Visit   HYPERLINK "http://www.acrecycle.org/contact.html" 
http://www.acrecycle.org/contact.html  for information on how to arrange
pick-up of this empty pesticide container.

Marrone Bio Innovations

WARRANTY

To the extent permitted by applicable law, the seller makes no warranty,
expressed or implied, of merchantability, fitness or otherwise
concerning use of this product. The user assumes all risks of use,
storage or handling that are not in strict accordance with the
accompanying directions.



Sublabel C: Home & Garden Use



MBI-206 EP

(Alternate Name: VENERATE™)

BIOLOGICAL INSECTICIDE

 (Can Be Used in Organic Gardening) (For Organic Gardening)(For Organic
Lawn Care)(OMRI Placeholder)

Active Ingredient: Heat-killed Burkholderia spp. strain A396 and 

                                spent fermentation media	94.46%

Other ingredients: 	5.54%

Total: 	100.00%

*Contains not less than 1,500 Beet Armyworm Killing Units (BAWKU)/mg. 
Note:  The percent active ingredient does not indicate product
performance and potency measurements are not federally standardized.

KEEP OUT OF REACH OF CHILDREN

CAUTION

FIRST AID

If in eyes 

	( Hold eye open and rinse slowly and gently with water for 15 – 20
minutes.

( Remove contact lenses, if present, after the first 5 minutes, then
continue rinsing eye.

( Call a poison control center or doctor for treatment advice. 

HOT LINE NUMBER

Have the product container or label with you when calling a poison
control center or doctor, or going for treatment.  You may also contact
1-800-222-1222 for emergency medical treatment information.



EPA Reg. No.: 84059-14	EPA Est. No.:  XXXXX-XX-XXX

Net Contents: XX

(Batch)(Lot) No: XXXX

Manufactured by:	Marrone Bio Innovations, Inc.

			2121 Second St., Suite B-107

			Davis, CA 95618  USA

			1-877-664-4476;   HYPERLINK "http://www.marronebioinnovations.com" 
www.marronebioinnovations.com ; info@marronebio.com

US Patents No. XXXXX

XXXX® is a trademark of Marrone Bio Innovations, Inc.

Marrone Bio Innovations name and logo are registered trademarks of
Marrone Bio Innovations, Inc. 

PRECAUTIONARY STATEMENTS

HAZARDS TO HUMANS AND DOMESTIC ANIMALS - CAUTION.  Causes moderate eye
irritation.  Avoid contact with eyes or clothing.  Wear goggles or
safety glasses.  Wash thoroughly with soap and water after handling and
before eating, drinking, chewing gum, using tobacco or using the toilet.
 Remove and wash contaminated clothing before use.  

ENVIRONMENTAL HAZARDS: To protect the environment, do not allow
pesticide to enter or run off into storm drains, drainage ditches,
gutters or surface waters. Applying this product in calm weather when
rain is not predicted for the next 24 hours will help to ensure that
wind or rain does not blow or wash pesticide off the treatment area. See
the Directions for Use section of this label for application
instructions that minimize risk to bees and other beneficial insects.   

 

DIRECTIONS FOR USE

It is a violation of Federal law to use this product in a manner
inconsistent with its labeling.  

HOME AND GARDEN USE DIRECTIONS

VENERATE™ is a biological insecticide containing killed cells and
fermentation solids of Burkholderia spp. strain A396 for use on
agricultural crops against the pests listed in the Directions for Use
section. VENERATE™ controls insect targets by enzymatic degradation of
exoskeletal structures and interference with the molting process leading
to mortality through contact and/or ingestion. Venerate controls or
suppresses many foliar feeding pests including caterpillars and foliage
feeding coleopteran and against many soft-bodied insects such as,
aphids, whiteflies and plant sucking mites infesting labeled crops and
plants. For insect control, the concentrate of VENERATE™ must be mixed
with water and applied as a foliar spray. 

To minimize potential exposure to bees and other pollinating insects, do
not apply while bees are foraging.  

VENERATE™ has been evaluated for toxicity to non-target insects in a
variety of bioassays and on a variety of crops under various normal
growing conditions. However, testing all beneficial insects, in all
situations, mixtures and combinations, is not feasible.   If you plan
to release beneficial insects into your garden, consult with an
extension specialist or with the product manufacturer prior to treating
entire garden.

DIRECTIONS FOR CONTROL OF FOLIAR PESTS

WHEN TO USE

For best results, apply VENERATE™ if pest species are present but
before populations are causing visible damage.

BEFORE YOU USE 

Read and follow these directions when using:

Do not allow spray to drift from application site.

Use only with pressurized hand-held sprayers or spray trigger bottles.

Do not allow spray mixture to stand overnight or for prolonged periods.

VENERATE™ can be applied in commonly used pressurized hand-held
sprayers, spray trigger bottles and hose-end sprayers.

HOW TO USE FOR HAND-HELD SPRAYERS AND SPRAY TRIGGER BOTTLES

Fill sprayer or bottle with appropriate amount of water and concentrate.

Mix the spray solution thoroughly.

Keep the spray solution agitated during application.

HOW TO USE FOR HOSE-END SPRAYERS

Follow hose-end sprayer instructions to determine how to fill, set dial,
clean and disconnect from hose.

Set dial on sprayer to deliver rate as directed below.

HOW MUCH TO USE FOR ALL APPLICATIONS

2 tablespoons of VENERATE™ per gallon of water

Some pesticides can cause phytotoxic effects ranging from slight burning
or browning of leaves to distorted leaves, fruit, flowers or stems.
Damage symptoms may vary with the type of plant that has been treated. 
It is impossible to test all plant species for phytotoxicity.  To assure
that the plants to be treated are not sensitive to the treatment, apply
a small amount of the product to a few leaves or the above ground
portion of the plant and check back in 2-4 days for signs of
phytotoxicity.  Use product according to label directions.

INSECTS CONTROLLED OR SUPPRESSED ON VEGETABLES, FRUITS, NUTS, ORNAMENTAL
PLANTS, TREES, SHRUBS, FLOWERS, FOLIAGE AND TROPICAL PLANTS

Alfalfa caterpillar

Alfalfa webworm 

Adelgids

Aphids

Armyworms

Cabbage looper

Chinch bugs

Codling moth

Corn earworm

Diamondback moth

Fruit flies 

Hornworms

Imported cabbageworm

Lace bugs

Leaf rollers

Leafhoppers

Light brown apple moth

Loopers

Mealybugs

Mites

Plant bugs

Plum curculio

Psyllids

Scales

Sharpshooters

Spittle bugs

Stink bugs 

Tent caterpillars

Thrips

Tufted apple budworm

Webworms

Whiteflies

DIRECTIONS FOR SUPPRESSION OF SOIL-BORNE PESTS (EXCLUDING TURF)

For suppression of soil-borne pests, including seed maggots, wireworms,
symphylans, cutworms, white grubs and plant-parasitic nematodes, apply
VENERATE™  as a soil drench directly into the seed furrow.  Mix
VENERATE™  at rate of 5 tablespoons per gallon of water, and apply the
mixture at the rate of 1 quart (32 fluid ounces) per 25 feet of row. 
For individual plants, such as tomatoes and peppers, apply the mixture
as a soil drench at the rate of 4 fluid ounces per plant. 

DIRECTIONS FOR SUPPRESSION OF PESTS OF TURF

Bluegrass billbug, annual bluegrass weevil, chinch bugs, armyworm,
webworms, and cutworms

Mix VENERATE™  at the rate of 5 tablespoons per gallon of water, and
apply to turf with a pressurized sprayer at the rate of 1 gallon per 250
square feet of turf.

Plant parasitic nematodes

Mix 5 tablespoons VENERATE™  per gallon of water, and apply at the
rate of 1 gallon per 250 square feet of turf.  For best control,
thoroughly irrigate following application to moisten the top inch of
soil.  There should be no more than ½ inch of thatch present at the
time of application.  Under dry conditions where thatch is present,
pre-watering is recommended prior to application.

For control of bluegrass billbug, annual bluegrass weevil, chinch bugs,
armyworm, webworms, and cutworms it is not necessary to irrigate
following application. 

STORAGE AND DISPOSAL

Do not contaminate water, food, or feed by storage or disposal. Use up
product within 6 months of purchase.

Pesticide Storage:  Store in a cool, dry place.  

Pesticide Disposal and Container Handling: Nonrefillable container.  Do
not reuse or refill this container. If empty: Place in trash and offer
for recycling if available.  

If partially filled: Call your local solid waste agency or (800)
858-7378 (National Pesticide Information Center) for disposal
instructions.  Never place unused product down any indoor or outdoor
drain.

Marrone Bio Innovations

WARRANTY

瑹⻄d

4

5

<

V

f

g

5

;

<

N

O

P

U

V

]

f

g



„

’

š

¤

¦

®

²

Y

Y

Z

j

à

ञŪ뜀ᗰ畨吸ᘀŨ伀Ɋ儀Ɋ帀ɊጀY

Z

j

愀̤摧܁ã

$

␃ᐃ¤愀̤摧܁ã

␃愃̤摧܁ã

ꐗ愀̤摧܁ã᠀

ༀ킄ᄂや廽킄怂や懽̤摧㕖j

愀̤摧䰻ß

h

hç

愀̤摧㮨ã

␃ᐃ¤愀̤摧㮨ã

ꐗ愀̤摧㮨ã

ༀ킄ᄂや廽킄怂や懽̤摧៙7

¬

Ã

hç

愀̤摧៙7

␃愃̤摧ጪ»

ꐗ愀̤摧䒪©

I

␃愃̤摧䤒

I

I

I

I

I

I

, the seller makes no warranty, expressed or implied, of
merchantability, fitness or otherwise concerning use of this product.
The user assumes all risks of use, storage or handling that are not in
strict accordance with the accompanying directions.

MBI-206 EP; EPA Reg. No. 84059-14

MASTER LABEL – Version (29) dated January 13, 2014

Page   PAGE  1  of   NUMPAGES   32 

