ConTegoTM Pro SL

Plant Growth Regulator

SOLUBLE LIQUID

S-Abscisic Acid (10.0%)

FOR USE ON 

ORNAMENTAL PLANTS 

Active Ingredient

S-Abscisic Acid
..........................................................…………
…...............................   10.0% w/v

Other
Ingredients....................................................………
……...................................    90.0% w/v

Total...................................................................
.....……………..................................   100.0% w/v

Contains a total of  10 g of Abscisic Acid (S-ABA) in 100 ml of product.
 S-Abscisic acid, commonly known as S-ABA, is a naturally occurring
growth regulator found in plants.  Application of S-ABA to ornamental
plants causes stomata to close, reduces water usage, and thus allows
plants to conserve water and withstand environmental stress.

This container will treat 1890 square feet when applied at the maximum
rate. 

KEEP OUT OF REACH OF CHILDREN

CAUTION

See next panel for First Aid Information.

	

EPA Registration No.  73049-UAE

EPA Establishment No.	33762-IA-001					

This label must be in the possession of the user at the time of
pesticide application.  

Permittee: 							                                                      
                  

Valent BioSciences Corporation

870 Technology Way

Libertyville, IL 60048

1-847-968-4700

Net Contents:  34 fl. oz.   (1000 ml) 



FIRST AID

If in eyes	Hold eye open and rinse slowly and gently with water for
15-20 minutes.

Remove contact lenses, if present, after the first 5 minutes, then
continue rinsing eye.

Call a poison control center or doctor for treatment advice. 

HOT LINE NUMBER

Have the product container or label with you when calling a poison
control center or doctor, or going for treatment.   You may also call
toll-free 1-800-892-0099 (24 hours) for emergency medical treatment
and/or transport emergency information.  For all other information, call
1-847-968-4700.



PRECAUTIONARY STATEMENTS

HAZARDS TO HUMANS & DOMESTIC ANIMALS

CAUTION: Causes moderate eye irritation.  Avoid contact with eyes or
clothing. Wash thoroughly with soap and water after handling and before
eating, drinking, chewing gum, using tobacco or using the toilet.



Personal Protective Equipment (PPE)

Applicators and other handlers must wear:

Long-sleeved shirt and long pants.

Shoes plus socks.

Follow the manufacturer's instructions for cleaning/maintaining PPE.  If
no such instructions for washables, use detergent and hot water.  Keep
and wash PPE separately from other laundry.

User Safety Recommendations

Users should:

Wash hands before eating, drinking, chewing gum, using tobacco or using
the toilet

Remove clothing/PPE immediately if pesticide gets inside.  Then wash
thoroughly and put on clean clothing.

Remove PPE immediately after handling this product.  As soon as
possible, wash thoroughly and change into clean clothing.  





ENVIRONMENTAL HAZARDS

Do not apply directly to water, or to areas where surface water is
present or to intertidal areas below the mean high water mark.  Do not
contaminate water when disposing of equipment wash-water or rinsate.  

DIRECTIONS FOR USE

It is a violation of Federal law to use this product in a manner
inconsistent with the terms of the Label.  Do not apply this product in
a way that will contact workers or other persons, either directly or
through drift.  Only protected handlers may be in the area during
application.  For any requirements specific to your State or Tribe,
consult the State or Tribal agency responsible for pesticide regulation.

AGRICULTURAL USE REQUIREMENTS

Use this product only in accordance with its labeling and with the
Worker Protection Standard, 40 CFR Part 170.  This Standard contains
requirements for the protection of agricultural workers on farms,
forests, nurseries, and greenhouses, and handlers of agricultural
pesticides.  It contains requirements for training, decontamination,
notification, and emergency assistance.  It also contains specific
instructions and exceptions pertaining to the statements on this label
about personal protective equipment (PPE), and restricted-entry
interval.  The requirements in this box only apply to uses of this
product that are covered by the Worker Protection Standard.

Do not enter or allow worker entry into treated areas during the
restricted entry interval (REI) of 4 hours.

PPE required for early entry to treated areas that is permitted under
the Worker Protection Standard and that involves contact with anything
that has been treated, such as plants, soil, or water is:

Long-sleeved shirt and long pants (or Coveralls).

Chemical resistant gloves (made of any waterproof material).

Shoes plus socks.





GENERAL DIRECTIONS FOR USE ON ORNAMENTALS

Use only as directed.  Read the label thoroughly and make sure it is
understood before making applications.  ConTegoTM Pro SL reduces
transpiration and delays wilting of ornamental plants caused by
environmental stresses.

Application instructions:

ConTegoTM Pro SL contains the active ingredient S-abscisic acid,
commonly known as S-ABA.  S-ABA is a potent Plant Growth Regulator, a
naturally occurring biochemical found in plants.  

Under drought conditions, endogenous S-ABA levels increase in leaves. 
S-ABA in turn signals stomata to close and thus reduces water loss and
controls water usage by the plant.  Similarly, exogenous application of
S-ABA causes stomata to close, reduces water usage, and thus allows
plants to conserve water.  S-ABA significantly reduces transpiration and
delays wilting of ornamental plants caused by environmental stress,
resulting in more desirable plants. 

Undesired effects can result from any deviations from the label
directions in the rates, timings, water volumes, or the adoption of
untested spray mixes, when applying ConTegoTM Pro SL.

To prepare the treatment solution, add the required amount ConTegoTM Pro
SL to a clean spray tank about half-filled with the water.  Agitate
while bringing the total volume of water to the required level.  Mix
thoroughly with agitation and bypass circulation to completely mix the
ConTegoTM Pro SL, and then add surfactant.  Discard any unused treatment
solution at the end of each day following local, state or federal law.

Best results will be achieved from applications during the cooler parts
of the day, avoiding the hottest period of the day.  To maximize
absorption and optimize product effectiveness, apply ConTegoTM Pro SL
under slow drying conditions, e.g. early in the morning or in the
evening (cool to warm temperatures, medium to high relative humidity,
and no wind).

Do not apply ConTegoTM Pro SL to plants under stress (e.g. heat, water,
disease and insect).  Injured or stressed plants will show a reduced
response to ConTegoTM Pro SL or may show phytotoxicity.

Do not overhead irrigate treated plants for at least 6 hours following
application of ConTegoTM Pro SL.

Compatibility With Other Agricultural Products

Compatibility and performance data for ConTegoTM Pro SL with other
agricultural products is not available.  Do not mix with other
agricultural products except an adjuvant (surfactant) suitable for use
on ornamental plants.

APPLICATIONS, RATES, AND TIMINGS

Ornamental PLANTS (non-food crops)

CROP	OBJECTIVE /

 BENEFIT	APPLICATION INSTRUCTIONS

Ornamental plants such as potted flowers, bedding, perennial, nursery
and foliage plants.

Although extensive testing has been conducted with ConTegoTM Pro SL, not
all varieties of ornamental plants have been evaluated.  It is highly
recommended that a small number of plants be tested for undesirable
effects of ConTegoTM Pro SL before treating a large number of plants.  

	For reduction of stress from lack of water and delay of wilting in
production and post- production of ornamental plants.

Contact Valent BioSciences Corporation for more information.

	

Spray Applications:  Apply up to 2.4 ounces of ConTegoTM Pro SL) per
gallon as a foliar spray to fully hydrated plants at 2-3 quarts of final
use solution /100 square feet.  Ensure adequate coverage of the plant.





	

Table 1:  ConTegoTM Pro SL - Dilution Table for ORNAMENTALS

PPM  S-ABA  Desired	Fluid Oz. 

Per 

Gallon	Fluid Oz. 

Per 

10 Gallons	Milliliters 

Per 

Gallon	Milliliters 

Per 

10 Gallons

125	0.15	1.5	4.8	48

250	0.3	3.0	9.5	95

500	0.6	6.0	19.0	190

1000	1.2	12.0	38.0	380

2000	2.4	24.0	76.0	760



FACTORS AFFECTING ORNAMENTAL PLANT RESPONSE TO ConTegoTM Pro SL

S-ABA is a potent Plant Growth Regulator, a naturally occurring
biochemical found in plants.  S-ABA signals stomata to close and thus
reduces water loss and controls water usage by the plant.  S-ABA
significantly reduces transpiration and delays wilting of ornamental
plants caused by environmental stress, resulting in more desirable
plants.  

In addition to proper application technique, environmental and cultural
factors will affect a plant’s response to treatment with ConTegoTM Pro
SL.  

Different varieties or cultivars within a given plant species may
require a higher or lower rate of ConTegoTM Pro SL to achieve the
desired delay in wilting.

Temperature and humidity can be an important factor in a plant’s
response to ConTegoTM Pro SL. Hot dry weather will result in a shorter
duration of effect from S-ABA applications.

Apply in the morning or evening when conditions are best for slow drying
of applied material, in order to ensure adequate absorption of the
product.  

Overhead irrigation within 6 hours after application will reduce product
activity.



Use of Adjuvants: An adjuvant suitable for use on ornamental plants will
likely increase ConTegoTM Pro SL product uptake, efficacy and potential
for negative effects. For optimal response, use ConTego with Capsil at 6
ounces per 100 gallons.  



Determining Optimal Rates:  Optimal ConTegoTM Pro SL rates will vary
according to the desired wilt delay, growing conditions & practices,
application technique, and environmental conditions.  Different
varieties or cultivars of the same species may respond differently to
ConTegoTM Pro SL.  Therefore, to determine response levels and or
phyto-toxicity potential, treat a small number of plants (using
application rates specified in Table 1) before applying ConTegoTM Pro SL
to a large number of plants.  With increasing temperature and lower
humidity consider using the higher rates within the range given in Table
1, remembering not to apply to plants that are already under stress. 

DO NOT exceed the maximum stated rate from Table 1.





ChemigatioN

Apply this product only through the following systems:

	1) Overhead sprinklers, such as impact, micro-sprinklers, or booms.

Do not apply this product through any other type of irrigation system. 
Crop injury, lack of effectiveness, or illegal pesticide residues in the
crop can result from non-uniform distribution of treated water.  If you
have questions about calibration, you should contact State Extension
Service specialists, equipment manufacturers or other experts.  Do not
connect an irrigation system (including greenhouse systems) used for
pesticide application to a public water system unless the pesticide
label prescribed safety devices for public water systems are in place. 
A person knowledgeable of the chemigation system and responsible for its
operation or under the supervision of the responsible person, shall shut
the system down and make necessary adjustments should the need arise.

CHEMIGATION SYSTEMS CONNECTED TO PUBLIC WATER SYSTEMS

Public water system means a system for the provision to the public of
piped water for human consumption if such system has at least 15 service
connections or regularly serves an average of at least 25 individuals
daily at least 60 days out of the year.  Chemigation systems connected
to public water systems must contain a functional, reduced pressure
zone, backflow preventer (RPZ) or the functional equivalent in the water
supply line upstream from the point of pesticide introduction.  As an
option to the RPZ, the water from the public water system should be
discharged into a reservoir tank prior to pesticide introduction.  There
shall be a complete physical break (air gap) between the outlet end of
the fill pipe and the top or overflow rim of the reservoir tank of at
least twice the inside diameter of the fill pipe.  The pesticide
injection pipeline must contain a functional, automatic, quick closing
check valve to prevent the flow of fluid back toward the injection pump.

The pesticide injection pipeline must contain a functional, normally
closed, solenoid-operated valve located on the intake side of the
injection pump and connected to the system interlock to prevent fluid
from being withdrawn from the supply tank when the irrigation system is
either automatically or manually shut down.  The system must contain
functional interlocking controls to automatically shut off the pesticide
injection pump when the water pump motor stops, or in cases where there
is no water pump, when the water pressure decreases to the point where
pesticide distribution is adversely affected.  Systems must use a
metering pump, such as a positive displacement injection pump (e.g.
diaphragm pump) effectively designed and constructed of materials that
are compatible with pesticides and capable of being fitted with a system
interlock.

SPRINKLER and SPRAY  -  IRRIGATION

The system must contain a functional check valve, vacuum relief valve,
and low-pressure drain appropriately located on the irrigation pipeline
to prevent water source contamination from backflow.

The pesticide injection pipeline must contain a functional, automatic,
quick closing check valve to prevent the flow of fluid back toward the
injection pump.

The pesticide injection pipeline must also contain a functional,
normally closed, solenoid-operated valve located on the intake side of
the injection pump and connected to the system interlock to prevent
fluid from being withdrawn from the supply tank when the irrigation
system is either automatically or manually shut down.

The system must contain functional interlocking controls to
automatically shut off the pesticide injection pump when the water pump
motor stops. 

The irrigation line or water pump must include a functional pressure
switch, which will stop the water pump motor when the water pressure
decreases to the point where pesticide distribution is adversely
affected.

Systems must use a metering pump, such as a positive displacement
injection pump (e.g. diaphragm pump) effectively designed and
constructed of materials that are compatible with pesticides and capable
of being fitted with a system interlock.

Fill the supply tank with the desired amount of water. Then add the
amount of ConTegoTM Pro SL required in order to achieve the selected
final use solution rate.  Agitate the mixture of ConTegoTM Pro SL
frequently during the chemigation period to assure a uniform
distribution throughout the system. 

Apply ConTegoTM Pro SL continuously for the duration of the water
application but do not exceed maximum rates and volumes stated in Table
1.  For overhead applications apply at a volume of 2 to 3 quarts of
final use solution per 100 sq. ft.  

STORAGE AND DISPOSAL

Do not contaminate water, food or feed by storage or disposal.

Pesticide Storage

Keep container tightly closed when not in use. Store product in a cool
and dry place.  Avoid extended storage conditions at temperatures above
25°C (77°F).  Avoid exposure of product to light or sunlight.

Pesticide Disposal

To avoid wastes, use all material in this container by application
according to label directions.  If wastes cannot be avoided, offer
remaining product to a waste disposal facility or pesticide disposal
program (often such programs are run by state or local governments or by
industry).

Container Handling

Nonrefillable container.  Do not reuse or refill this container.  Triple
rinse container (or equivalent) promptly after emptying.  Triple rinse
as follows: Empty the remaining contents into application equipment or a
mix tank and drain for 10 seconds after flow begins to drip.  Fill the
container ¼ full with water and recap.  Shake for 10 seconds.  Pour
rinsate into application equipment or a mix tank or store rinsate for
later use or disposal.  Drain for 10 seconds after the flow begins to
drip.  Repeat this procedure two more times.  Offer for recycling, if
available or puncture and dispose of the container in a sanitary
landfill, or by other procedures approved by state and local
authorities.





Warranty and Disclaimer Statement:

To the fullest extent permitted by law, seller makes no warranty,
express or implied, of merchantability, fitness or otherwise concerning
use of this product other than as indicated on the label.  User assumes
all risks of use, storage or handling not in strict accordance with
accompanying directions.

Valent BioSciences Corp.     ©2009

   Page   PAGE  1  of   NUMPAGES  9 		S-Abscisic acid, (S-ABA)

		  Ornamental – Soluble Liquid – Use Label		

