
[Federal Register: February 4, 2010 (Volume 75, Number 23)]
[Notices]               
[Page 5790-5794]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr04fe10-58]                         

-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OPP-2009-0045; FRL-8807-5]

 
Notice of Receipt of Several Pesticide Petitions Filed for 
Residues of Pesticide Chemicals in or on Various Commodities

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: This notice announces the Agency's receipt of several initial 
filings of pesticide petitions proposing the establishment or 
modification of regulations for residues of pesticide chemicals in or 
on various commodities.

DATES: Comments must be received on or before March 8, 2010.

ADDRESSES: Submit your comments, identified by docket identification 
(ID)

[[Page 5791]]

number and the pesticide petition number (PP) of interest as shown in 
the body of this document, by one of the following methods:
     Federal eRulemaking Portal: http://www.regulations.gov. 
Follow the on-line instructions for submitting comments.
     Mail: Office of Pesticide Programs (OPP) Regulatory Public 
Docket (7502P), Environmental Protection Agency, 1200 Pennsylvania 
Ave., NW., Washington, DC 20460-0001.
     Delivery: OPP Regulatory Public Docket (7502P), 
Environmental Protection Agency, Rm. S-4400, One Potomac Yard (South 
Bldg.), 2777 S. Crystal Dr., Arlington, VA. Deliveries are only 
accepted during the Docket Facility's normal hours of operation (8:30 
a.m. to 4 p.m., Monday through Friday, excluding legal holidays). 
Special arrangements should be made for deliveries of boxed 
information. The Docket Facility telephone number is (703) 305-5805.
    Instructions: Direct your comments to the docket ID number and the 
pesticide petition number of interest as shown in the body of this 
document. EPA's policy is that all comments received will be included 
in the docket without change and may be made available on-line at 
http://www.regulations.gov, including any personal information 
provided, unless the comment includes information claimed to be 
Confidential Business Information (CBI) or other information whose 
disclosure is restricted by statute. Do not submit information that you 
consider to be CBI or otherwise protected through regulations.gov or e-
mail. The regulations.gov website is an ``anonymous access'' system, 
which means EPA will not know your identity or contact information 
unless you provide it in the body of your comment. If you send an e-
mail comment directly to EPA without going through regulations.gov, 
your e-mail address will be automatically captured and included as part 
of the comment that is placed in the docket and made available on the 
Internet. If you submit an electronic comment, EPA recommends that you 
include your name and other contact information in the body of your 
comment and with any disk or CD-ROM you submit. If EPA cannot read your 
comment due to technical difficulties and cannot contact you for 
clarification, EPA may not be able to consider your comment. Electronic 
files should avoid the use of special characters, any form of 
encryption, and be free of any defects or viruses.
    Docket: All documents in the docket are listed in the docket index 
available at http://www.regulations.gov. Although listed in the index, 
some information is not publicly available, e.g., CBI or other 
information whose disclosure is restricted by statute. Certain other 
material, such as copyrighted material, is not placed on the Internet 
and will be publicly available only in hard copy form. Publicly 
available docket materials are available either in the electronic 
docket at http://www.regulations.gov, or, if only available in hard 
copy, at the OPP Regulatory Public Docket in Rm. S-4400, One Potomac 
Yard (South Bldg.), 2777 S. Crystal Dr., Arlington, VA. The hours of 
operation of this Docket Facility are from 8:30 a.m. to 4 p.m., Monday 
through Friday, excluding legal holidays. The Docket Facility telephone 
number is (703) 305-5805.

FOR FURTHER INFORMATION CONTACT: A contact person, with telephone 
number and e-mail address, is listed at the end of each pesticide 
petition summary. You may also reach each contact person by mail at 
Registration Division (7505P), Office of Pesticide Programs, 
Environmental Protection Agency, 1200 Pennsylvania Ave., NW., 
Washington, DC 20460-0001.

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

    You may be potentially affected by this action if you are an 
agricultural producer, food manufacturer, or pesticide manufacturer. 
Potentially affected entities may include, but are not limited to:
     Crop production (NAICS code 111).
     Animal production (NAICS code 112).
     Food manufacturing (NAICS code 311).
     Pesticide manufacturing (NAICS code 32532).
    This listing is not intended to be exhaustive, but rather provides 
a guide for readers regarding entities likely to be affected by this 
action. Other types of entities not listed in this unit could also be 
affected. The North American Industrial Classification System (NAICS) 
codes have been provided to assist you and others in determining 
whether this action might apply to certain entities. If you have any 
questions regarding the applicability of this action to a particular 
entity, consult the person listed at the end of the pesticide petition 
summary of interest.

B. What Should I Consider as I Prepare My Comments for EPA?

     1. Submitting CBI. Do not submit this information to EPA through 
regulations.gov or e-mail. Clearly mark the part or all of the 
information that you claim to be CBI. For CBI information in a disk or 
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as 
CBI and then identify electronically within the disk or CD-ROM the 
specific information that is claimed as CBI. In addition to one 
complete version of the comment that includes information claimed as 
CBI, a copy of the comment that does not contain the information 
claimed as CBI must be submitted for inclusion in the public docket. 
Information so marked will not be disclosed except in accordance with 
procedures set forth in 40 CFR part 2.
     2. Tips for preparing your comments. When submitting comments, 
remember to:
    i. Identify the document by docket ID number and other identifying 
information (subject heading, Federal Register date and page number).
    ii. Follow directions. The Agency may ask you to respond to 
specific questions or organize comments by referencing a Code of 
Federal Regulations (CFR) part or section number.
    iii. Explain why you agree or disagree; suggest alternatives and 
substitute language for your requested changes.
    iv. Describe any assumptions and provide any technical information 
and/or data that you used.
    v. If you estimate potential costs or burdens, explain how you 
arrived at your estimate in sufficient detail to allow for it to be 
reproduced.
    vi. Provide specific examples to illustrate your concerns and 
suggest alternatives.
    vii. Explain your views as clearly as possible, avoiding the use of 
profanity or personal threats.
    viii. Make sure to submit your comments by the comment period 
deadline identified.
    3. Environmental justice. EPA seeks to achieve environmental 
justice, the fair treatment and meaningful involvement of any group, 
including minority and/or low-income populations, in the development, 
implementation, and enforcement of environmental laws, regulations, and 
policies. To help address potential environmental justice issues, the 
Agency seeks information on any groups or segments of the population 
who, as a result of their location, cultural practices, or other 
factors, may have a typical or disproportionately high and adverse 
human health impacts or environmental effects from exposure to the 
pesticides discussed in this document, compared to the general 
population.

[[Page 5792]]

II. What Action is the Agency Taking?

     EPA is announcing its receipt of several pesticide petitions filed 
under section 408 of the Federal Food, Drug, and Cosmetic Act (FFDCA), 
21 U.S.C. 346a, proposing the establishment or modification of 
regulations in 40 CFR part 174 or part 180 for residues of pesticide 
chemicals in or on various food commodities. EPA has determined that 
the pesticide petitions described in this notice contain the data or 
information prescribed in FFDCA section 408(d)(2); however, EPA has not 
fully evaluated the sufficiency of the submitted data at this time or 
whether the data support granting of the pesticide petitions. 
Additional data may be needed before EPA can make a final determination 
on these pesticide petitions.
     Pursuant to 40 CFR 180.7(f), a summary of each of the petitions 
that are the subject of this notice, prepared by the petitioner, is 
included in a docket EPA has created for each rulemaking. The docket 
for each of the petitions is available on-line at http://
www.regulations.gov.
    As specified in FFDCA section 408(d)(3), (21 U.S.C. 346a(d)(3)), 
EPA is publishing notice of the petition so that the public has an 
opportunity to comment on this request for the establishment or 
modification of regulations for residues of pesticides in or on food 
commodities. Further information on the petition may be obtained 
through the petition summary referenced in this unit.

New Tolerances

     1. PP 9E7606. (EPA-HQ-OPP-2009-0906). Syngenta Crop Protection, 
Inc., 410 Swing Road, P.O. Box 18300, Greensboro, NC 27419-8300, 
proposes to establish an import tolerance in 40 CFR part 180 for 
residues of the fungicide isopyrazam (SYN520453), in or on banana at 
0.05 parts per million (ppm). An adequate, validated method 
(GRM006.01B) is available for enforcement purposes for the 
determination of residues of isopyrazam, analyzed as the isomers 
SYN534968 and SYN534969, in crop samples. The limit of quantitation 
(LOQ) has been set at 0.005 mg/kg for each isomer (0.01 mg/kg for 
SYN520453 in total). Final determination is by liquid chromatography-
mass spectrometry/mass spectrometry (LC-MS/MS). An analytical method 
suitable for the determination of residues of the metabolites 
CSCD459488 and CSCD459489 (syn and anti forms respectively) in crop 
samples using an external standardization procedure is also available 
(GRM006.03A). The LOQ has been set at 0.005 mg/kg for both analytes. 
Final determination is by LC-MS/MS. Contact: Shaunta Hill, (703) 347-
8961; hill.shaunta@epa.gov.
     2. PP 9E7632. (EPA-HQ-OPP-2009-0861). The Interregional Research 
Project No. 4 (IR-4), 500 College Road East, Suite 201W, Princeton, NJ 
08540, proposes to establish a tolerance in 40 CFR part 180 for 
residues of the insecticide spirodiclofen, (3-(2,4-dichlorophenyl)-2-
oxo-1-oxaspiro[4,5]dec-3-en-4-yl 2,2-dimethylbutanoate), in or on the 
bushberry subgroup 13-07B at 4.0 ppm. Adequate analytical methodology 
using LC-MS/MS detection is available for enforcement purposes. 
Contact: Laura Nollen, (703) 305-7390; nollen.laura@epa.gov.
     3. PP 9E7642. (EPA-HQ-OPP-2009-0890). The Interregional Research 
Project No. 4 (IR-4), 500 College Road East, Suite 201W, Princeton, NJ 
08540, in cooperation with Chemtura Corp., 199 Benson Rd (2-5), 
Middlebury, CT 06749, proposes to establish tolerances in 40 CFR part 
180 for residues of the insecticide bifenazate, (1-methylethyl 2-(4-
methoxy[1,1'-biphenyl]-3-yl)hydrazinecarboxylate) and diazinecarboxylic 
acid, 2-(4-methoxy-[1,1'-biphenyl]-3-yl), 1-methylethyl ester 
(expressed as bifenazate), in or on sugar apple, cherimoya, atemoya, 
custard apple, ilama, soursop, and biriba at 1.5 ppm; avocado at 7.0 
ppm; fruit, small, vine climbing subgroup 13-07F, except fuzzy kiwi 
fruit at 0.75 ppm; and berry, low growing, subgroup 13-07G at 1.5 ppm. 
Chemtura Corporation, has developed practical analytical methodology 
for detecting and measuring residues of bifenazate in or on raw 
agricultural commodities. As D3598, a significant metabolite, was found 
to interconvert readily to/from bifenazate, the analytical method was 
designed to convert all residues of D3598 to the parent compound 
(bifenazate) for analysis. The method, ``Determination of Combined 
Bifenazate and D3598 Residues in Sugar Apple'', utilizes reversed phase 
high performance liquid chromatography (HPLC) to separate the 
bifenazate from matrix derived interferences, and oxidative coulometric 
electrochemical detection for the identification and quantification of 
this analyte. The lowest level of method validation (LLMV) in this 
study was 0.05 ppm for each analyte. Based on recoveries of samples 
fortified at the LLMV, the limit of detection (LOD) and limit of 
quantitation (LOQ) were calculated as 0.0308 ppm and 0.0923 ppm, 
respectively, for bifenazate and as 0.0332 ppm and 0.0997 ppm, 
respectively, for D3598. Contact: Sidney Jackson, (703) 305-7610; 
jackson.sidney@epa.gov.
     4. PP 9E7651. (EPA-HQ-OPP-2009-0980). Syngenta Crop Protection, 
Inc., P.O. Box 18300, Greensboro, NC 27419-8300, proposes to establish 
import tolerances in 40 CFR part 180 for residues of the insecticide 
fluazifop-p-butyl, in or on potato, tuber at 1.1 ppm; potato, peel 
(wet) at 1.1 ppm; potato, chips at 3.0 ppm; and potato, granules/flakes 
at 5.0 ppm. Syngenta has developed and validated analytical methodology 
for enforcement purposes. This method has been submitted to the Agency 
and is in the Pesticide Analytical Manual, Vol. II (PAM II). An 
extensive database of method validation data using this method on 
various crop commodities is available. Contact: Michael Walsh, (703) 
308-2972; walsh.michael@epa.gov.
    5. PP 9F7568. (EPA-HQ-OPP-2009-0481). Valent U.S.A. Company, 1600 
Riviera Ave., Walnut Creek, CA 94596-8025, proposes to establish 
tolerances in 40 CFR part 180 for residues of the fungicide 2,6-
Dichlorobenzamide (BAM), in or on cattle, fat; cattle, meat byproducts; 
goat, fat; goat, meat byproducts; horse, fat; horse, meat byproducts; 
sheep, fat; and sheep, meat byproducts at 0.05 ppm; and cattle, meat; 
goat, meat; horse, meat; sheep, meat at 0.02 ppm, and milk at 0.02 ppm. 
A practical analytical method utilizing liquid chromatography and mass 
spectrometry detection that is validated for detecting and measuring 
levels of fluopicolide and BAM in animal matrices has been submitted. A 
confirmation method for milk, with a limit of quantitation of 0.002 
ppm, has also been developed and is being submitted as part of this 
petition. Contact: Janet Whitehurst, (703) 305-6129; 
whitehurst.janet@epa.gov.
    6. PP 9F7590. (EPA-HQ-OPP-2009-0873). BASF Corporation, P.O. Box 
13528, Research Triangle Park, NC 27709, proposes to establish 
tolerances in 40 CFR part 180 for residues of the fungicide 
pyraclostrobin, carbamic acid [2-[[[1-(4-chlorophenyl)-1H-pyrazol-3-
yl]oxy]methyl]phenyl]methoxy-, methyl ester and its metabolite methyl-
N-[[[1-(4-chlorophenyl) pyrazol-3-yl]oxy]o-tolyl] carbamate (BF 500-3); 
expressed as parent compound, in or on soybean, forage at 11.0 ppm; and 
soybean, hay at 14.0 ppm. In plants, the method of analysis is aqueous 
organic solvent extraction, column clean up and quantitation by LC-MS/
MS. In animals, the method of analysis involves base hydrolysis, 
organic extraction, column clean up and quantitation by LC-MS/MS

[[Page 5793]]

or derivatization (methylation) followed by quantitation by gas 
chromatography/MS (GC/MS). Contact: Shaunta Hill, (703) 347-8961; 
hill.shaunta@epa.gov.
    7. PP 9F7617. (EPA-HQ-OPP-2009-0481). Valent U.S.A. Company, 1600 
Riviera Ave., Walnut Creek, CA 94596-8025, proposes to establish a 
tolerance in 40 CFR part 180 for residues of the fungicide 
fluopicolide, 2,6-dichloro-N-[[3-chloro-5-(trifluoromethyl)-2-
pyridyl]methyl]benzamide, as an indicator of combined residues of 
fluopicolide and its metabolite, 2,6-dichlorobenzamide (BAM), in or on 
vegetable, Brassica, leafy greens, subgroup 05B at 20 ppm. Practical 
analytical methods for detecting and measuring levels of fluopicolide 
and its metabolites have been developed and validated in/on all 
appropriate plant and animal matrices. An analytical method for 
detecting fluopicolide and BAM in mustard greens has been submitted 
with this petition. The LOQ of fluopicolide and the metabolite in the 
analytical method for mustard greens is 10 parts per billion (ppb) 
(0.01 ppm), which will allow monitoring for residues at the levels 
proposed for the tolerances. Contact: Janet Whitehurst, (703) 305-6129; 
whitehurst.janet@epa.gov.
    8. PP 9F7620. (EPA-HQ-OPP-2009-0836). Gowan Company, 370 S. Main 
Street, Yuma, AZ 85364, proposes to establish a tolerance in 40 CFR 
part 180 for residues of the herbicide S-ethyl dipropylthiocarbamate 
(EPTC), in or on grasses grown for seed, hay at 0.1 ppm and grasses 
grown for seed, forage at 0.2 ppm. Adequate methods are available for 
the determination of EPTC and three hydroxy metabolites in crops, 
including grass grown for seed. The EPA reviewed these methods and 
noted in the ``1999 EPTC Reregistration Eligibility Decision (RED)'' 
that methods are available and adequate. The LOQ of the methods is 0.05 
ppm for EPTC and 0.01 ppm for each of the hydroxy metabolites. Contact: 
Bethany Benbow, (703) 347-8072; benbow.bethany@epa.gov.
     9. PP 9F7639. (EPA-HQ-OPP-2009-0920). Syngenta Crop Protection, 
Inc., P.O. Box 18300, Greensboro, NC 27419, proposes to establish a 
tolerance in 40 CFR part 180 for residues of the herbicide diquat 
dibromide, in or on canola, seed at 1.0 ppm; and canola, meal at 3.0 
ppm. An adequate analytical method, extraction with sulfuric acid with 
HPLC detection, is available for enforcement purposes. Analytical 
methods for enforcing these tolerances have been published in the PAM 
II. Contact: Bethany Benbow, (703) 347-8072; benbow.bethany@epa.gov.

Amended Tolerances

     1. PP 9E7632. (EPA-HQ-OPP-2009-0861). The Interregional Research 
Project No. 4 (IR-4), 500 College Road East, Suite 201W, Princeton, NJ 
08540, proposes to amend the tolerances in 40 CFR 180.608 by revising 
the tolerance expression under paragraphs (a)(1) and (a)(2) to read as 
follows: (a)(1). Tolerances are established for residues of the 
insecticide spirodiclofen, including its metabolites and degradates. 
Compliance with the tolerance levels specified is to be determined by 
measuring only spirodiclofen (3-(2,4-dichlorophenyl)-2-oxo-1-
oxaspiro[4,5]dec-3-en-4-yl 2,2-dimethylbutanoate). (a)(2). Tolerances 
are established for residues of the insecticide spirodiclofen, 
including its metabolites and degradates. Compliance with the tolerance 
levels specified is to be determined by measuring only the sum of 
spirodiclofen (3-(2,4-dichlorophenyl)-2-oxo-1-oxaspiro[4,5]dec-3-en-4-
yl 2,2-dimethylbutanoate) and its metabolite 3-(2,4-dichlorophenyl)-4-
hydroxy-1-oxaspiro[4,5]dec-3-en-2-one, calculated as the stoichiometric 
equivalent of spirodiclofen. Adequate analytical methodology using LC-
MS/MS detection is available for enforcement purposes. Contact: Laura 
Nollen, (703) 305-7390; nollen.laura@epa.gov.
    2. PP 9F7576. (EPA-HQ-OPP-2009-0673). BASF Corporation, 26 Davis 
Dr., Research Triangle Park, NC 27709, proposes to increase the 
tolerance in 40 CFR 180.361 for residues of the herbicide 
pendimethalin, N-(1-ethylpropyl)-3,4-dimethyl-2,6-dinitrobenzenamine, 
and its metabolite 4-[(1-ethylpropyl)amino]-2-methyl-3,5-dinitrobenzyl 
alcohol, in or on alfalfa, forage from 3.0 ppm to 3.5 ppm. In plants, 
the method is aqueous organic solvent extraction, column clean up, and 
quantitation by GC. The method has a LOQ of 0.05 ppm for pendimethalin 
and the alcohol metabolite. Contact: Philip Errico, (703) 305-6663; 
errico.philip@epa.gov.

New Tolerance Exemptions

     1. PP 9E7627. (EPA-HQ-OPP-2009-0046). Joint Inerts Task Force, 
Cluster Support Team 25, EPA Company Number 84866, c/o CropLife 
America, 1156 15th St., NW, Suite 400, Washington, DC 20005, proposes 
to establish an exemption from the requirement of a tolerance for 
residues of N-alkyl (C8-C18) primary amines and 
acetate salts (NAPAAS) under 40 CFR 180.910 and 180.930 when used as 
inert ingredients in pesticide formulations, limited to a maximum of 
10% by weight in herbicide products, and 4% by weight in other 
pesticidal products for the following N-alkyl (C8-
C18) primary amines and acetate salts where the alkyl group 
is linear and may be saturated and or unsaturated including: The N-
alkyl (C8-C18) primary amines acetate salts: 
amines, coco alkyl, acetates (61790-57-6); amines, soya alkyl, acetates 
(61790-60-1); amines, hydrogenated tallow alkyl, acetates (61790-59-8); 
and amines, tallow alkyl, acetates (61790-58-7); and the following N-
alkyl (C8-C18) primary amines: amines, coco alkyl 
(61788-46-3); amines, coco alkyl (61790-33-8); and amines, 
C14-18 and C16-18 
unsaturated alkyl (68155-38-4). The petitioner believes no analytical 
method is needed because requirements for an analytical method are not 
applicable to a request to establish an exemption from the requirement 
of a tolerance. Contact: Karen Samek, (703) 347-8825; 
samek.karen@epa.gov.
     2. PP 9E7628. (EPA-HQ-OPP-2009-0131). Joint Inerts Task Force, 
Cluster Support Team 2, EPA Company Number 84914, c/o CropLife America, 
1156 15th St., NW, Suite 400, Washington, DC 20005, proposes to 
establish an exemption from the requirement of a tolerance for residues 
of alkyl alcohol alkoxylate phosphate derivatives (AAAPD) under 40 CFR 
180.910 and 180.930 when used as inert ingredients in pesticide 
formulations, limited to a maximum of 30% by weight in end-use products 
for the [alpha]-alkyl (minimum C6 linear or branched, 
saturated and or unsaturated)-[omega]-hydroxypolyoxyethylene polymer 
with or without polyoxypropylene, mixture of di- and monohydrogen 
phosphate esters and the corresponding ammonium, calcium, magnesium, 
monoethanolamine, potassium, sodium and zinc salts of the phosphate 
esters; minimum oxyethylene content averages 2 moles; minimum 
oxypropylene content is 0 moles, including: Poly(oxy-1,2-ethanediyl), 
[alpha]-tridecyl-[omega]-hydroxy-, phosphate (9046-01-9); Poly(oxy-1,2-
ethanediyl), [alpha]-dodecyl-[omega]-hydroxy-, phosphate (39464-66-9); 
Poly(oxy-1,2-ethanediyl), [alpha]-hexadecyl-[omega]-hydroxy-, phosphate 
(50643-20-4); Poly(oxy-1,2-ethanediyl), [alpha]-decyl-[omega]-hydroxy-, 
phosphate (52019-36-0); Poly(oxy-1,2-ethanediyl), [alpha]-hydro-
[omega]-hydroxy-, mono-C12-15-alkyl ethers, 
phosphates (69071-35-2); Polyphosphoric acids, esters with polyethylene 
glycol decyl ether (68458-48-0); Poly(oxy-1,2-ethanediyl), [alpha]-
hydro-[omega]-hydroxy-, mono-C10-14-alkyl ethers, 
phosphates (68585-36-4); Poly(oxy-1,2-ethanediyl), [alpha]-hydro-
[omega]-hydroxy-, mono-C12-15-branched alkyl

[[Page 5794]]

ethers, phosphates (68815-11-2); Poly(oxy-1,2-ethanediyl), [alpha]-
hydro-[omega]-hydroxy-, mono-C10-12-alkyl ethers, 
phosphates (68908-64-5); Poly(oxy-1,2-ethanediyl), [alpha]-hydro-
[omega]-hydroxy-, mono-C12-14-alkyl ethers, 
phosphates (68511-37-5); Poly(oxy-1,2-ethanediyl), [alpha]-hydro-
[omega]-hydroxy-, mono-C8-10-alkyl ethers, 
phosphates (68130-47-2); Poly(oxy-1,2-ethanediyl), [alpha]-dodecyl-
[omega]-hydroxy-, phosphate, sodium salt (42612-52-2); Poly(oxy-1,2-
ethanediyl), [alpha]-dodecyl-[omega]-hydroxy-, phosphate, potassium 
salt (58318-92-6); Poly(oxy-1,2-ethanediyl), [alpha]-hexadecyl-[omega]-
hydroxy-, phosphate, potassium salt (60267-55-2); Poly(oxy-1,2-
ethanediyl), [alpha]-decyl-[omega]-hydroxy-, phosphate, potassium salt 
(68070-99-5); Poly(oxy-1,2-ethanediyl), [alpha]-tridecyl-[omega]-
hydroxy-, phosphate, potassium salt (68186-36-7); Poly(oxy-1,2-
ethanediyl), [alpha]-decyl-[omega]-hydroxy-, phosphate, sodium salt 
(68186-37-8); Poly(oxy-1,2-ethanediyl), [alpha]-hydro-[omega]-hydroxy-, 
mono-C12-15-alkyl ethers, phosphates, sodium 
salts (68610-65-1); Poly(oxy-1,2-ethanediyl), [alpha]-isodecyl-[omega]-
hydroxy-, phosphate, potassium salt (68071-17-0); (branched C10) 
Poly(oxy-1,2-ethanediyl), [alpha]-phosphono-[omega]-[(2-
propylheptyl)oxy]-, potassium salt (1:2) (936100-29-7); (branched C10) 
Poly(oxy-1,2-ethanediyl), [alpha]-phosphono-[omega]-[(2-
propylheptyl)oxy]-, sodium salt (1:2) (936100-30-0); Poly(oxy-1,2-
ethanediyl), [alpha]-isotridecyl-[omega]-hydroxy-, phosphate (73038-25-
2); Poly(oxy-1,2-ethanediyl), [alpha]-hydro-[omega]-hydroxy-, mono-
C11-14-isoalkyl ethers, C13-rich, 
phosphates (78330-24--2); Poly(oxy-1,2-ethanediyl), [alpha]-hydro-
[omega]-hydroxy-, mono(C10-rich C9-11-
isoalkyl) ethers, phosphates (154518-39-5); Poly(oxy-1,2-ethanediyl), 
[alpha]-hydro-[omega]-hydroxy-, mono-C12-14-sec-
alkyl ethers, phosphates (317833-96-8); Poly(oxy-1,2-ethanediyl), 
[alpha]-isodecyl-[omega]-hydroxy-, phosphate (108818-88-8); Poly(oxy-
1,2-ethanediyl), [alpha]-phosphono-[omega]-[(2-propylheptyl)oxy] 
(873662-29-4); Poly(oxy-1,2-ethanediyl), [alpha]-dodecyl-[omega]-
hydroxy-, phosphate, monoethanolamine salt (61837-79-4); Poly(oxy-1,2-
ethanediyl), [alpha]-tridecyl-[omega]-hydroxy-, phosphate 
monoethanolamine salt (68311-02-4); Poly(oxy-1,2-ethanediyl), [alpha]-
decyl-[omega]-hydroxy-, phosphate, monoethanolamine salt (68425-73-0); 
Oxirane, methyl-, polymer with oxirane, phosphate (37280-82-3); 
Oxirane, methyl-, polymer with oxirane, mono-C10-
16-alkyl ethers, phosphates (68649-29-6); Oxirane, methyl-, 
polymer with oxirane, phosphate, potassium salt (67711-84-6); and 
Oxirane, methyl-, polymer with oxirane, mono-C10-
16-alkyl ethers, phosphates, potassium salt (68891-13-4). 
The petitioner believes no analytical method is needed because 
requirements for an analytical method are not applicable to a request 
to establish an exemption from the requirement of a tolerance. Contact: 
Karen Samek, (703) 347-8825; samek.karen@epa.gov.
     3. PP 9E7638. (EPA-HQ-OPP-2009-0937). Cognis Corporation, c/o 
Lewis & Harrison, LLC, 122 C Street NW, Suite 740, Washington, DC 
20001, proposes to establish an exemption from the requirement of a 
tolerance for residues of the alkyl polyglycosides (CAS Nos. 68515-73-
1, 110615-47-9, and 132778-08-6) under 40 CFR 180.950 when used as 
inert ingredients in pesticide formulations. The petitioner believes no 
analytical method is needed because requirements for an analytical 
method are not applicable to a request to establish an exemption from 
the requirement of a tolerance. Contact: Karen Samek, (703) 347-8825; 
samek.karen@epa.gov.

List of Subjects

    Environmental protection, Agricultural commodities, Feed additives, 
Food additives, Pesticides and pests, Reporting and recordkeeping 
requirements.

    Dated: January 27, 2010.
Lois Rossi,
Director, Registration Division, Office of Pesticide Programs.
[FR Doc. 2010-2382 Filed 2-3-10; 8:45 am]
BILLING CODE 6560-50-S

