
[Federal Register: August 4, 2008 (Volume 73, Number 150)]
[Notices]               
[Page 45317-45322]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr04au08-96]                         



[[Page 45317]]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OPP-2007-1060; FRL-8373-6]

 
Pesticide Inert Ingredients: Status of Revoked Tolerance 
Exemptions

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: EPA is providing the status of inert ingredient tolerance 
exemptions revoked in the Federal Register on August 9, 2006 (71 FR 
45415) because of insufficient data.

FOR FURTHER INFORMATION CONTACT: Karen Angulo, Registration Division 
(7505P), Office of Pesticide Programs, Environmental Protection Agency, 
1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone 
number: (703) 306-0404; fax number: (703) 605-0781; e-mail address: 
angulo.karen@epa.gov.

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

    You may be potentially affected by this action if you are an 
agricultural producer, food manufacturer, or pesticide manufacturer. 
Potentially affected entities may include, but are not limited to:
     Crop production (NAICS code 111).
    Animal production (NAICS code 112).
    Food manufacturing (NAICS code 311).
    Pesticide manufacturing (NAICS code 32532).
    This listing is not intended to be exhaustive, but rather provides 
a guide for readers regarding entities likely to be affected by this 
action. Other types of entities not listed in this unit could also be 
affected. The North American Industrial Classification System (NAICS) 
codes have been provided to assist you and others in determining 
whether this action might apply to certain entities. To determine 
whether you or your business may be affected by this action, you should 
carefully examine the applicability provisions in Unit II. If you have 
any questions regarding the applicability of this action to a 
particular entity, consult the person listed under FOR FURTHER 
INFORMATION CONTACT.

B. How Can I Get Copies of this Document and Other Related Information?

    1. Docket. EPA has established a docket for this action under 
docket identification (ID) number EPA-HQ-OPP-2007-1060. Publicly 
available docket materials are available either in the electronic 
docket at http://www.regulations.gov, or, if only available in hard 
copy, at the Office of Pesticide Programs (OPP) Regulatory Public 
Docket in Rm. S-4400, One Potomac Yard (South Bldg.), 2777 S. Crystal 
Dr., Arlington, VA. The hours of operation of this Docket Facility are 
from 8:30 a.m. to 4 p.m., Monday through Friday, excluding legal 
holidays. The Docket Facility telephone number is (703) 305-5805.
    2. Electronic access. You may access this Federal Register document 
electronically through the EPA Internet under the ``Federal Register'' 
listings at http://www.epa.gov/fedrgstr.

II. Background

A. Background on the Inert Ingredient Tolerance Exemption Revocation 
Action

    In a final rule published in the Federal Register on August 9, 2006 
(71 FR 45415)(FRL-8084-1), EPA revoked inert ingredient tolerance 
exemptions because insufficient data were available to the Agency to 
make the safety determination required by FFDCA section 408(c)(2). EPA 
concluded it had insufficient data to make the safety finding of FFDCA 
section 408(c)(2) and revoked the inert ingredient tolerance exemptions 
identified in the final rule under 40 CFR 180.910, 180.920, 180.930, 
and 180.940, with the revocations effective on August 9, 2008. This 
action did not preclude the possibility that through rulemaking EPA 
could reinstate those tolerance exemptions for which data are submitted 
that are sufficient to support the 408(c)(2) safety finding.
    In the Federal Register of November 2, 2007, (72 FR 62232)(FRL-
8155-4), EPA published the support status of each of the revoked 
tolerance exemptions. EPA had received communications from pesticide 
registrants and inert ingredient manufacturers expressing interest in 
supporting certain revoked inert ingredient tolerance exemptions. EPA's 
guidance, available at http://www.epa.gov/opprd001/inerts/, describes 
how interested parties could demonstrate support for revoked tolerance 
exemptions, including identifying test materials and contracts with 
laboratories.
    Elsewhere in this issue of the Federal Register is the final rule 
that moves the effective date of the revocation to August 9, 2009 for 
those tolerance exemptions where EPA has received a demonstration of 
intent to support. No extensions are granted for revoked tolerance 
exemptions where EPA has not received a demonstration of intent to 
support, therefore, the revocation date for unsupported tolerance 
exemptions remains August 9, 2008.

B. Effective Dates of the Revocation of Tolerance Exemptions with 
Insufficient Data

    The following provides the revocation status of each of the inert 
ingredient tolerance exemptions revoked because of insufficient data. 
The tolerance exemptions are presented below in the order they appeared 
in the final rule published in the Federal Register on August 9, 2006 
(71 FR 45415). The revocation status has been added to the end of each 
tolerance exemption expression. The expiration date of August 9, 2009 
applies to tolerance exemption expressions with the following at the 
end: ``(Demonstration of intent to support; revocation effective August 
9, 2009).'' Tolerance exemption expressions with ``(No demonstration of 
support; revocation effective August 9, 2008)'' expire on August 9, 
2008. In addition, administrative revocation was completed in the 
Federal Register on August 9, 2006 (71 FR 45415) for seven redundant 
and incorrect tolerance exemptions, which are identified here as 
``(Administrative revocation is complete; revoked August 9, 2006)''.
    Two other revoked tolerance exemptions received an acceptable 
demonstration of support and the effective date of the revocation is 
now August 9, 2009. In the Federal Register on August 9, 2006 (71 FR 
45415), the Agency revoked two inert ingredient tolerance exemptions 
with insufficient data under 40 CFR part 180. They were inadvertently 
removed from the CFR some time ago but are considered to be active 
tolerance exemptions subject to reassessment as required by the FFDCA 
section 408(q). The effective date of the revocation of the following 
two tolerance exemptions is now August 9, 2009:
    1. Section 180.910: ``[alpha]-Alkyl(C12-C15)-
[omega]- hydroxypoly(oxyethylene) sulfate, ammonium, calcium, 
magnesium, potassium, sodium, and zinc salts; the poly(oxyethylene) 
content averages 3 moles.'', and
    2. Section 180.930: ``[alpha]-Alkyl (C12-
C15)-[omega]-hydroxypoly(oxyethylene) sulfate and its 
ammonium, calcium, magnesium, potassium, sodium, and zinc salts; the 
poly(oxyethylene) content averages 3 moles.''

C. Unsupported Inert Ingredient Tolerance Exemptions

    It is important to note that EPA has not received indications of 
intent to support many of the inert ingredient

[[Page 45318]]

tolerance exemptions revoked in the Federal Register on August 9, 2006 
(71 FR 45415). The unsupported tolerance exemptions are identified in 
the list in this Unit with ``(No demonstration of intent to support; 
revocation effective August 9, 2008)'' at the end of the expression. No 
time extension is granted for the revoked tolerance exemptions where 
EPA has not received a demonstration of intent to support, therefore, 
the expiration date for those tolerance exemptions with no indication 
of intent to support remains August 9, 2008. Please note that this 
revocation action only affects the use of these inert ingredients in 
food-use pesticide products, therefore, any current use of these inert 
ingredients in non-food use pesticide products is not affected.
    At this time, EPA is no longer accepting or processing applications 
for registrations for food-use products containing a tolerance 
exemption that expires on August 9, 2008 unless accompanied by a 
petition for a new tolerance or exemption under the Pesticide 
Registration Improvement Renewal Act (PRIA 2), together with all 
necessary supporting data. All commodities containing residues of these 
revoked inert ingredients on food are adulterated under FFDCA 408 if 
the residues are the result of applications of pesticide products made 
after August 9, 2008. Registrants who submitted a registration 
application for a food-use formulation containing an inert ingredient 
with an expiring tolerance exemption may submit a new application for 
registration with only those inert ingredients that are approved for 
the label's use sites. If the registration application is subject to, 
including registration applications submitted under PRIA 2 that include 
a petition for a new or amended food-use inert ingredient, the 
following Web site provides useful information: http://www.epa.gov/
pesticides/fees/questions/pria21day_wrksht.pdf. Currently approved 
food-use inert ingredient tolerance exemptions are found in 40 CFR part 
180 (http://www.epa.gov/opprd001/inerts/lists.html). Contact EPA's 
Inert Ingredient Assessment Branch at inertsbranch@epa.gov for 
information about how to establish a new inert ingredient.

Under Sec.  180.910:

    a. [alpha]-Alkyl (C9-C18-[omega]-
hydroxypoly(oxyethylene) with poly(oxyethylene) content of 2-30 moles. 
(Demonstration of intent to support; revocation effective August 9, 
2009)
    b. [alpha]-(p-Alkylphenyl)-[omega]-hydroxypoly(oxyethylene) 
produced by the condensation of 1 mole of alkylphenol (alkyl is a 
mixture of propylene tetramer and pentamer isomers and averages 
C13) with 6 moles of ethylene oxide. (No demonstration of 
intent to support; revocation effective August 9, 2008)
    c. [alpha]-Alkyl (C6-C14)-[omega]-
hydroxypoly(oxypropylene) block copolymer with polyoxyethylene; 
polyoxypropylene content is 1-3 moles; polyoxyethylene content is 4-12 
moles; average molecular weight (in amu) is approximately 635. 
(Demonstration of intent to support; revocation effective August 9, 
2009)
    d. [alpha]-(p-tert-Butylphenyl)-[omega]-hydroxypoly (oxyethylene) 
mixture of dihydrogen phosphate and monohydrogen phosphate esters and 
the corresponding ammonium calcium, magnesium, monoethanolamine, 
potassium, sodium, and zinc salts of the phosphate esters; the 
poly(oxyethylene) content averages 4-12 moles. (No demonstration of 
intent to support; revocation effective August 9, 2008)
    e. [alpha]-(o,p-Dinonylphenyl)-[omega]-hydroxypoly (oxyethylene) 
mixture of dihydrogen phosphate and monohydrogen phosphate esters and 
the corresponding ammonium, calcium, magnesium, monoethanolamine, 
potassium, sodium, and zinc salts of the phosphate esters; the nonyl 
group is a propylene trimer isomer and the poly(oxyethylene) content 
averages 4-14 moles. (No demonstration of intent to support; revocation 
effective August 9, 2008)
    f. [alpha]-(o,p-Dinonylphenyl)-[omega]-hydroxypoly (oxyethylene) 
produced by condensation of 1 mole of dinonylphenol (nonyl group is a 
propylene trimer isomer) with an average of 4-14 or 140-160 moles of 
ethylene oxide. (No demonstration of intent to support; revocation 
effective August 9, 2008)
    g. Dodecylbenzenesulfonic acid, amine salts. (No demonstration of 
intent to support; revocation effective August 9, 2008)
    h. [alpha]-(p-Dodecylphenyl)-[omega]-hydroxypoly (oxyethylene) 
produced by the condensation of 1 mole of dodecylphenol (dodecyl group 
is a propylene tetramer isomer) with an average of 4-14 or 30-70 moles 
of ethylene oxide; if a blend of products is used, the average number 
of moles of ethylene oxide reacted to produce any product that is a 
component of the blend shall be in the range of 4-14 or 30-70. (No 
demonstration of intent to support; revocation effective August 9, 
2008)
    i. Ethylene oxide adducts of 2,4,7,9-tetramethyl-5-decynediol, the 
ethylene oxide content averages 3.5, 10, or 30 moles. (Demonstration of 
intent to support; revocation effective August 9, 2009)
    j. [alpha]-Lauryl-[omega]-hydroxypoly(oxyethylene), average 
molecular weight (in amu) of 600. (Demonstration of intent to support; 
revocation effective August 9, 2009)
    k. [alpha]-Lauryl-[omega]-hydroxypoly(oxyethylene) sulfate, sodium 
salt; the poly(oxyethylene) content is 3-4 moles. (Demonstration of 
intent to support; revocation effective August 9, 2009)
    l. Manganous oxide. (No demonstration of intent to support; 
revocation effective August 9, 2008)
    m. [alpha]-(p-Nonylphenyl)-[omega]-hydroxypoly(oxyethylene) mixture 
of dihydrogen phosphate and monohydrogen phosphate esters and the 
corresponding ammonium, calcium, magnesium, monoethanolamine, 
potassium, sodium, and zinc salts of the phosphate esters; the nonyl 
group is a propylene trimer isomer and the poly (oxyethylene) content 
averages 4-14 moles or 30 moles. (Demonstration of intent to support; 
revocation effective August 9, 2009)
    n. [alpha]-(p-Nonylphenyl)-[omega]-hydroxypoly(oxyethylene) 
sulfate, ammonium, calcium, magnesium, potassium, sodium, and zinc 
salts; the nonyl group is a propylene trimer isomer and the 
poly(oxyethylene) content averages 4 moles. (Demonstration of intent to 
support; revocation effective August 9, 2009)
    o. Polyglyceryl phthalate ester of coconut oil fatty acids. 
(Demonstration of intent to support; revocation effective August 9, 
2009)
    p. Poly(methylene-p-tert-butylphenoxy)- poly(oxyethylene) ethanol; 
the poly(oxyethylene) content averages 4-12 moles. (No demonstration of 
intent to support; revocation effective August 9, 2008)
    q. Poly(methylene-p-nonylphenoxy)poly(oxyethylene) ethanol; the 
poly(oxyethylene) content averages 4-12 moles. (No demonstration of 
intent to support; revocation effective August 9, 2008)
    r. Secondary alkyl (C11-C15) 
poly(oxyethylene) acetate, sodium salt; the ethylene oxide content 
averages 5 moles. (No demonstration of intent to support; revocation 
effective August 9, 2008)
    s. Sodium diisobutylnaphthalenesulfonate. (Demonstration of intent 
to support; revocation effective August 9, 2009)
    t. Sodium dodecylphenoxybenzenedisulfonate.

[[Page 45319]]

(Demonstration of intent to support; revocation effective August 9, 
2009)
    u. Sodium isopropylisohexylnaphthalenesulfonate. (No demonstration 
of intent to support; revocation effective August 9, 2008)
    v. Sodium lauryl glyceryl ether sulfonate. (No demonstration of 
intent to support; revocation effective August 9, 2008)
    w. Sodium monoalkyl and dialkyl (C8-C16) 
phenoxybenzenedisulfonate mixtures containing not less than 70% of the 
monoalkylated product. (Demonstration of intent to support; revocation 
effective August 9, 2009)
    x. Sodium mono- and dimethylnaphthalenesulfonates, molecular weight 
(in amu) 245-260. (Demonstration of intent to support; revocation 
effective August 9, 2009)
    y. Sodium mono-, di-, and tributyl naphthalenesulfonates. 
(Demonstration of intent to support; revocation effective August 9, 
2009)
    z. Sodium mono-, di-, and triisopropyl naphthalenesulfonate. 
(Demonstration of intent to support; revocation effective August 9, 
2009)
    aa. Sodium N-oleoyl-N-methyltaurine. (Demonstration of intent to 
support; revocation effective August 9, 2009)
    bb. Sodium sulfite. (No demonstration of intent to support; 
revocation effective August 9, 2008. The tolerance exemption under 
Sec.  180.910 is revoked. Please note that EPA is currently evaluating 
a petition for an exemption from the requirement of a tolerance for a 
limited use of sodium sulfite as an inert ingredient. See the notice of 
filing published in the Federal Register on February 6, 2008 (73 FR 
6964)(FRL-8350-6)).
    cc. [alpha]-[p-(1,1,3,3-Tetramethylbutyl)phenyl]-[omega]-
hydroxypoly(oxyethylene) produced by the condensation of 1 mole of p-
(1,1,3,3-tetramethylbutyl)phenol with a range of 1-14 or 30-70 moles of 
ethylene oxide: if a blend of products is used, the average range 
number of moles of ethylene oxide reacted to produce any product that 
is a component of the blend shall be in the range of 1-14 or 30-70. 
(Demonstration of intent to support; revocation effective August 9, 
2009)
    dd. [alpha]-[p-(1,1,3,3-Tetramethylbutyl) phenyl]-[omega]-
hydroxypoly(oxyethylene) produced by the condensation of 1 mole of p-
(1,1,3,3-tetramethylbutyl) phenol with an average of 4-14 or 30-70 
moles of ethylene oxide; if a blend of products is used, the average 
number of moles of ethylene oxide reacted to produce any product that 
is a component of the blend shall be in the range of 4-14 or 30-70. 
(Administrative revocation is complete; revoked August 9, 2006)
    ee. Tridecylpoly(oxyethylene) acetate, sodium salt; where the 
ethylene oxide content averages 6-7 moles. (No demonstration of intent 
to support; revocation effective August 9, 2008)
    In the final rule published in the Federal Register on August 9, 
2006 (71 FR 45415), the Agency revoked one other inert ingredient 
tolerance exemption that was inadvertently removed from the CFR some 
time ago but is considered to be an active tolerance exemption under 
Sec.  180.910:
    ``[alpha]-Alkyl(C12-C15)-[omega]- 
hydroxypoly(oxyethylene) sulfate, ammonium, calcium, magnesium, 
potassium, sodium, and zinc salts; the poly(oxyethylene) content 
averages 3 moles.'' (Demonstration of intent to support; revocation 
effective August 9, 2009)

Under Sec.  180.920:

    a. [alpha]-Alkyl (C12-C18)-[omega]-
hydroxypoly(oxyethylene) copolymers with poly(oxypropylene); 
polyoxyethylene content averages 3-12 moles and polyoxypropylene 
content 2-9 moles. (Demonstration of intent to support; revocation 
effective August 9, 2009)
    b. [alpha]-Alkyl (C10-C16)-[omega]-
hydroxypoly(oxyethylene) mixture of dihydrogen phosphate and 
monohydrogen phosphate esters and the corresponding ammonium, calcium, 
magnesium, monoethanolamine, potassium, sodium, and zinc salts of the 
phosphate esters; the poly(oxyethylene) content averages 3-20 moles. 
(Demonstration of intent to support; revocation effective August 9, 
2009)
    c. [alpha]-Alkyl (C12-C15)-[omega]-
hydroxypoly(oxyethylene) sulfosuccinate, isopropylamine and N-
hydroxyethyl isopropylamine salts of; the poly(oxyethylene) content 
averages 3-12 moles. (No demonstration of intent to support; revocation 
effective August 9, 2008)
    d. [alpha]-Alkyl(C10-12)-[omega]-
hydroxpoly(oxyethylene) poly(oxypropylene) copolymer; poly(oxyethylene) 
content is 11-15 moles; poly(oxyproplene) content is 1-3 moles. (No 
demonstration of intent to support; revocation effective August 9, 
2008)
    e. [alpha]-Alkyl(C12-C18)-[omega]-hydroxypoly 
(oxyethylene/oxypropylene) hetero polymer in which the oxyethylene 
content averages 13-17 moles and the oxypropylene content averages 2-6 
moles. (Demonstration of intent to support; revocation effective August 
9, 2009)
    f. [alpha]-Alkyl (C10-C16)-[omega]-
hydroxypoly(oxyethylene)poly(oxypropylene) mixture of di- and 
monohydrogen phosphate esters and the corresponding ammonium, calcium, 
magnesium, monoethanolamine, potassium, sodium, and zinc salts of the 
phosphate esters; the combined poly(oxyethylene) poly(oxypropylene) 
content averages 3-20 moles. (Demonstration of intent to support; 
revocation effective August 9, 2009)
    g. [alpha]-Alkyl (C12-C18)-[omega]-
hydroxypoly(oxyethylene/oxypropylene) hetero polymer in which the 
oxyethylene content is 8-12 moles and the oxypropylene content is 3-7 
moles. (Demonstration of intent to support; revocation effective August 
9, 2009)
    h. [alpha]-Alkyl (C12-C15)-[omega]-
hydroxypoly(oxyethylene/oxypropylene) hetero polymer in which the 
oxyethylene content is 8-13 moles and the oxypropylene content is 7-30 
moles. (Demonstration of intent to support; revocation effective August 
9, 2009)
    i. [alpha]-Alkyl (C21-C71)-[omega]-
hydroxypoly (oxyethylene) in which the poly(oxyethylene) content is 2 
to 91 moles and molecular weight range from 390 to 5,000. 
(Demonstration of intent to support; revocation effective August 9, 
2009)
    j. n-Alkyl(C8-C18)amine acetate. 
(Demonstration of intent to support; revocation effective August 9, 
2009)
    k. Amine salts of alkyl (C8-C24) 
benzenesulfonic acid (butylamine, dimethylaminopropylamine, mono- and 
diisopropylamine, mono- , di- , and triethanolamine). (Demonstration of 
intent to support; revocation effective August 9, 2009)
    l. N-(Aminoethyl) ethanolamine salt of dodecylbenzenesulfonic acid. 
(No demonstration of intent to support; revocation effective August 9, 
2008)
    m. N,N-Bis[[alpha]-ethyl-[omega]-hydroxypoly(oxyethylene) 
alkylamine; the poly(oxyethylene) content averages 3 moles; the alkyl 
groups (C14-C18) are derived from tallow, or from 
soybean or cottonseed oil acids. (Demonstration of intent to support; 
revocation effective August 9, 2009)
    n. N,N-Bis(2-hydroxyethyl)alkylamine, where the alkyl groups 
(C8-C18) are derived from coconut, cottonseed, 
soya, or tallow acids. (Demonstration of intent to support; revocation 
effective August 9, 2009)
    o. N,N-Bis 2-([omega]-hydroxypolyoxyethylene) ethyl) alkylamine; 
the reaction product of 1 mole N,N-bis(2-hydroxyethyl)alkylamine and 3-
60 moles of ethylene oxide, where the alkyl group (C8-
C18) is derived from coconut, cottonseed, soya, or tallow 
acids.

[[Page 45320]]

(Demonstration of intent to support; revocation effective August 9, 
2009)
    p. N,N-Bis-2-([omega]-hydroxypolyoxyethylene/polyoxypropylene) 
ethyl alkylamine; the reaction product of 1 mole of N,N-bis(2-
hydroxyethyl alkylamine) and 3-60 moles of ethylene oxide and propylene 
oxide, where the alkyl group (C8-C18) is derived 
from coconut, cottonseed, soya, or tallow acids. (Demonstration of 
intent to support; revocation effective August 9, 2009)
    q. Butoxytriethylene glycol phosphate. (No demonstration of intent 
to support; revocation effective August 9, 2008)
    r. Cyclohexanol. (No demonstration of intent to support; revocation 
effective August 9, 2008)
    s. [alpha]-(Di-sec-butyl)phenylpoly(oxypropylene) block polymer 
with poly(oxyethylene); the poly(oxypropylene) content averages 4 
moles, the poly(oxyethylene) content averages 5 to 12 moles, the 
molecular. (Demonstration of intent to support; revocation effective 
August 9, 2009)
    t. Disodium 4-isodecyl sulfosuccinate. (No demonstration of intent 
to support; revocation effective August 9, 2008)
    u. Dodecylphenol. (No demonstration of intent to support; 
revocation effective August 9, 2008)
    v. [alpha]-Dodecylphenol-[omega]-hydroxypoly(oxyethylene/
oxypropylene) hetero polymer where ethylene oxide content is 11-13 
moles and oxypropylene content is 14-16 moles, molecular weight (in 
amu) averages 600 to 965. (No demonstration of intent to support; 
revocation effective August 9, 2008)
    w. Isopropylbenzenesulfonic acid and its ammonium, calcium, 
magnesium, potassium, sodium, and zinc salts. (No demonstration of 
intent to support; revocation effective August 9, 2008)
    x. (3-Lauramidopropyl) trimethylammonium methyl sulfate. (No 
demonstration of intent to support; revocation effective August 9, 
2008)
    y. Linoleic diethanolamide (CAS Reg. No. 56863-02-6). 
(Demonstration of intent to support; revocation effective August 9, 
2009)
    z. Methyl bis(2-hydroxyethyl)alkyl ammonium chloride, where the 
carbon chain (C8-C18) is derived from coconut, 
cottonseed, soya, or tallow acids. (Demonstration of intent to support; 
revocation effective August 9, 2009)
    aa. [alpha],[alpha]'-[Methylenebis]-4-(1,1,3,3-tetramethylbutyl)-o-
phenylene bis[[omega]-hydroxypoly(oxyethylene)] having 6-7.5 moles of 
ethylene oxide per hydroxyl group. (No demonstration of intent to 
support; revocation effective August 9, 2008)
    bb. Methylnaphthalenesulfonic acid--formaldehyde condensate, sodium 
salt. (Demonstration of intent to support; revocation effective August 
9, 2009)
    cc. Methyl poly(oxyethylene) alkyl ammonium chloride, where the 
poly(oxyethylene) content is 3-15 moles and the alkyl group 
(C8-C18) is derived from coconut, cottonseed, 
soya, or tallow acids. (Demonstration of intent to support; revocation 
effective August 9, 2009)
    dd. Methyl violet 2B. (No demonstration of intent to support; 
revocation effective August 9, 2008)
    ee. Morpholine salt of dodecylbenzenesulfonic acid. (No 
demonstration of intent to support; revocation effective August 9, 
2008)
    ff. Naphthalenesulfonic acid-formaldehyde condensate, ammonium and 
sodium salts. (Demonstration of intent to support; revocation effective 
August 9, 2009)
    gg. Partial sodium salt of N-lauryl-[alpha]-iminodipropionic acid. 
(Demonstration of intent to support; revocation effective August 9, 
2009)
    hh. Poly(methylene-p-nonylphenoxy)poly(oxypropylene) propanol; the 
poly(oxy-propylene) content averages 4-12 moles. (No demonstration of 
intent to support; revocation effective August 9, 2008)
    ii. Primary n-alkylamines, where the alkyl group (C8-
C18) is derived from coconut, cottonseed, soya, or tallow 
acids. (Demonstration of intent to support; revocation effective August 
9, 2009)
    jj. Sodium butyl naphthalenesulfonate. (Administrative revocation 
is complete; revoked August 9, 2006)
    kk. Sodium 1,4-dicyclohexyl sulfosuccinate. (No demonstration of 
intent to support; revocation effective August 9, 2008)
    ll. Sodium 1,4-dihexyl sulfosuccinate. (Demonstration of intent to 
support; revocation effective August 9, 2009)
    mm. Sodium 1,4-diisobutyl sulfosuccinate. (Demonstration of intent 
to support; revocation effective August 9, 2009)
    nn. Sodium 1,4-dipentyl sulfosuccinate. (Demonstration of intent to 
support; revocation effective August 9, 2009)
    oo. Sodium 1,4-ditridecyl sulfosuccinate. (No demonstration of 
intent to support; revocation effective August 9, 2008)
    pp. Sodium mono- and dimethyl naphthalenesulfonate; molecular 
weight (in amu) 245-260. (Administrative revocation is complete; 
revoked August 9, 2006)
    qq. Sulfosuccinic acid ester with N-(2,-hydroxy-propyl) oleamide, 
ammonia and isopropylamine salts of. (No demonstration of intent to 
support; revocation effective August 9, 2008)
    rr. Tall oil diesters with polypropylene glycol (CAS Reg. No. 
68648-12-4). (No demonstration of intent to support; revocation 
effective August 9, 2008)
    ss. N,N,N',N''-Tetrakis-(2-hydroxypropyl) ethylenediamine. 
(Demonstration of intent to support; revocation effective August 9, 
2009)
    tt. [alpha]-[p-(1,1,3,3-Tetramethylbutyl)phenyl]-[omega]-
hydroxypoly(oxyethylene) mixture of dihydrogen phosphate and 
monohydrogen phosphate esters and the corresponding sodium salts of the 
phosphate esters; the poly(oxyethylene) content averages 6 to 10 moles. 
(No demonstration of intent to support; revocation effective August 9, 
2008)

Under Sec.  180.930:

    a. [alpha]-Alkyl (C9-C18)-[omega]-hydroxy 
poly(oxyethylene): the poly(oxyethylene) content averages 2-20 moles. 
(No demonstration of intent to support; revocation effective August 9, 
2008)
    b. [alpha]-Alkyl (C12-C15)-[omega]-
hydroxypoly(oxyethylene/oxypropylene) hetero polymer in which the 
oxyethylene content is 8-13 moles and the oxypropylene content is 7-30 
moles. (Demonstration of intent to support; revocation effective August 
9, 2009)
    c. [alpha]-Alkyl (C8-C10) 
hydroxypoly(oxypropylene) block polymer with polyoxyethylene; 
polyoxypropylene content averages 3 moles and polyoxyethylene content 
averages 5-12 moles. (Demonstration of intent to support; revocation 
effective August 9, 2009)
    d. [alpha]-Alkyl (C6-C14)-[omega]-
hydroxypoly(oxypropylene) block copolymer with polyoxyethylene; 
polyoxypropylene content is 1-3 moles; polyoxyethylene content is 7-9 
moles; average molecular weight (in amu) approximately 635. 
(Demonstration of intent to support; revocation effective August 9, 
2009)
    e. [alpha]-(p-Alkylphenyl)-[omega]-hydroxypoly (oxyethylene) 
produced by the condensation of 1 mole of alkylphenol (alkyl is a 
mixture of propylene tetramer and pentamer isomers and averages 
C13) with 6 moles of ethylene oxide. (No demonstration of 
intent to support; revocation effective August 9, 2008)
    f. Amine salts of alkyl (C8-C24) 
benzenesulfonic acid (butylamine; dimethylamino propylamine; mono- and 
diisopropyl-amine; and mono-, di-,

[[Page 45321]]

and triethanolamine). (Demonstration of intent to support; revocation 
effective August 9, 2009)
    g. [alpha]-(p-tert- Butylphenyl)-[omega]-hydroxypoly(oxyethylene) 
mixture of dihydrogen phosphate and monohydrogen phosphate esters and 
the corresponding ammonium, calcium, magnesium, monoethanolamine, 
potassium, sodium, and zinc salts of the phosphate esters; the 
poly(oxyethylene) content averages 4-12 moles. (No demonstration of 
intent to support; revocation effective August 9, 2008)
    h. [alpha]-(o,p-Dinonylphenyl)-[omega]-hydroxypoly (oxyethylene) 
mixture of dihydrogen phosphate and monohydrogen phosphate esters and 
the corresponding ammonium, calcium, magnesium, monoethanolamine, 
potassium, sodium, and zinc salts of the phosphate esters; the nonyl 
group is a propylene trimer isomer and the poly(oxyethylene) content 
averages 4-14 moles. (No demonstration of intent to support; revocation 
effective August 9, 2008)
    i. [alpha]-(o,p-Dinonylphenyl)-[omega]-hydroxypoly (oxyethylene), 
produced by the condensation of 1 mole of dinonylphenol (nonyl group is 
a propylene trimer isomer) with an average of 4-14 moles of ethylene 
oxide. (No demonstration of intent to support; revocation effective 
August 9, 2008)
    j. Dodecylbenzenesulfonic acid, amine salts. (No demonstration of 
intent to support; revocation effective August 9, 2008)
    k. [alpha]-(p-Dodecylphenyl)-[omega]-hydroxypoly (oxyethylene) 
produced by the condensation of 1 mole of dodecylphenol (dodecyl group 
is a propylene tetramer isomer) with an average of 4-14 or 30-70 moles 
of ethylene oxide; if a blend of products is used, the average number 
of moles of ethylene oxide reacted to produce any product that is a 
component of the blend shall be in the range of 4-14 or 30-70 moles. 
(No demonstration of intent to support; revocation effective August 9, 
2008)
    l. Ethylene oxide adducts of 2,4,7,9-tetramethyl-5-decynediol, the 
ethylene oxide content averages 3.5, 10, or 30 moles. (Demonstration of 
intent to support; revocation effective August 9, 2009)
    m. Ethyl vinyl acetate (CAS Reg. No. 24937-78-8). (Administrative 
revocation is complete; revoked August 9, 2006)
    n. [alpha]-Lauryl-[omega]-hydroxypoly(oxyethylene), average 
molecular weight (in amu) of 600. (Demonstration of intent to support; 
revocation effective August 9, 2009)
    o. [alpha]-Lauryl-[omega]-hydroxypoly(oxyethylene), sulfate, sodium 
salt; the poly(oxyethylene) content is 3-4 moles. (Demonstration of 
intent to support; revocation effective August 9, 2009)
    p. Manganous oxide. (No demonstration of intent to support; 
revocation effective August 9, 2008)
    q. [alpha]-(Methylene (4-(1,1,3,3-tetramethylbutyl)-o-phenylene) 
bis-[omega]-hydroxypoly(oxyethylene) having 6-7.5 moles of ethylene 
oxide per hydroxyl group. (Administrative revocation is complete; 
revoked August 9, 2006)
    r. Mono-, di-, and trimethylnaphthalenesulfonic acids-formaldehyde 
condensates, sodium salts. (No demonstration of intent to support; 
revocation effective August 9, 2008)
    s. Naphthalenesulfonic acid and its sodium salt. (Demonstration of 
intent to support; revocation effective August 9, 2009)
    t. [alpha]-(p-Nonylphenyl)-[omega]-hydroxypoly(oxyethylene) mixture 
of dihydrogen phosphate and monohydrogen phosphate esters and the 
corresponding ammonium, calcium, magnesium, monoethanolamine, 
potassium, sodium, and zinc salts of the phosphate esters; the nonyl 
group is a propylene trimer isomer and the poly(oxyethylene) content 
averages 4-14 moles. (Demonstration of intent to support; revocation 
effective August 9, 2009)
    u. [alpha]-(p-Nonylphenyl)-[omega]-hydroxypoly(oxyethylene) 
sulfate, and its ammonium, calcium, magnesium, potassium, sodium, and 
zinc salts; the nonyl group is a propylene trimer isomer and the 
poly(oxyethylene) content averages 4 moles. (Demonstration of intent to 
support; revocation effective August 9, 2009)
    v. [alpha]-(p-Nonylphenyl)-[omega]-hydroxypoly(oxyethylene) 
sulfate, and its ammonium, calcium, magnesium, monoethanolamine, 
potassium, sodium, and zinc salts; the nonyl group is a propylene 
trimer isomer and the poly(oxyethylene) content averages 4-14 or 30-90 
moles of ethyiene oxide. (Demonstration of intent to support; 
revocation effective August 9, 2009)
    w. Polyglyceryl phthalate esters of coconut oil fatty acids. 
(Demonstration of intent to support; revocation effective August 9, 
2009)
    x. Poly(methylene-p-tert-butylphenoxy)poly(oxyethylene) ethanol; 
the poly(oxyethylene) content averages 4-12 moles. (No demonstration of 
intent to support; revocation effective August 9, 2008)
    y. Poly(methylene-p-nonylphenoxy)poly(oxyethylene) ethanol; the 
poly(oxyethylene) content averages 4-12 moles. (No demonstration of 
intent to support; revocation effective August 9, 2008)
    z. Poly(methylene-p-nonylphenoxy)poly(oxypropylene) propanol; the 
poly(oxypropylene) content averages 4-12 moles. (No demonstration of 
intent to support; revocation effective August 9, 2008)
    aa. Secondary alkyl (C11-C15) 
poly(oxyethylene) acetate, sodium salt; the ethylene oxide content 
averages 5 moles. (No demonstration of intent to support; revocation 
effective August 9, 2008)
    bb. Sodium butylnaphthalenesulfonate. (Administrative revocation is 
complete; revoked August 9, 2006)
    cc. Sodium diisobutylnaphthalenesulfonate. (Demonstration of intent 
to support; revocation effective August 9, 2009)
    dd. Sodium isopropylisohexylnaphthalenesulfonate. (No demonstration 
of intent to support; revocation effective August 9, 2008)
    ee. Sodium isopropylnaphthalenesulfonate. (Demonstration of intent 
to support; revocation effective August 9, 2009)
    ff. Sodium monoalkyl and diakyl (C8-C13) 
phenoxybenzenedisulfonate mixtures containing not less than 70% of the 
monoalkylated product. (Demonstration of intent to support; revocation 
effective August 9, 2009)
    gg. Sodium mono- and dimethylnaphthalenesulfonate, molecular weight 
(in amu) 245-260. (Demonstration of intent to support; revocation 
effective August 9, 2009)
    hh. Sodium mono-, di-, and tributylnaphthalenesulfonates. 
(Demonstration of intent to support; revocation effective August 9, 
2009)
    ii. Sodium N-oleoyl-N-methyl taurine. (Demonstration of intent to 
support; revocation effective August 9, 2009)
    jj. [alpha]-[p-(1,1,3,3-Tetramethylbutyl)phenyl]-[omega]-
hydroxypoly(oxyethylene) produced by the condensation of 1 mole of p 
(1,1,3,3-tetramethylbutyl)phenol with a range of 1-14 or 30-70 moles of 
ethylene oxide: if a blend of products is used, the average range 
number of moles of ethylene oxide reacted to produce any product that 
is a component of the blend shall be in the range of 1-14 or 30-70. 
(Demonstration of intent to support; revocation effective August 9, 
2009)
    kk. [alpha]-[p-(1,1,3,3-Tetramethylbutyl)phenyl]-[omega]-
hydroxypoly(oxyethylene) produced by the condensation of 1 mole of p-
(1,1,-3,3-tetramethylbutyl) phenol with an average of 4-14 or 30-70 
moles of

[[Page 45322]]

ethylene oxide; if a blend of products is used, the average number of 
moles of ethylene oxide reacted to produce any product that is a 
component of the blend shall be in the range of 4-14 or 30-70. 
(Administrative revocation is complete; revoked August 9, 2006)
    ll. Tridecylpoly(oxyethylene) acetate sodiums salt; where the 
ethylene oxide content averages 6-7 moles. (No demonstration of intent 
to support; revocation effective August 9, 2008)
    In the final rule published in the Federal Register on August 9, 
2006 (71 FR 45415), the Agency revoked one other inert ingredient 
tolerance exemption that was inadvertently removed from the CFR some 
time ago but is considered to be an active tolerance exemption under 
Sec.  180.930:
    ``[alpha]-Alkyl (C12-C15)-[omega]-
hydroxypoly(oxyethylene) sulfate and its ammonium, calcium, magnesium, 
potassium, sodium, and zinc salts; the poly(oxyethylene) content 
averages 3 moles.'' (Demonstration of intent to support; revocation 
effective August 9, 2009)

Under Sec.  180.940:

    Under paragraph (a):
    i. [alpha]-Alkyl(C10-C14)-[omega]- 
hydroxypoly (oxyethylene) poly(oxypropylene) average molecular weight 
(in amu), 768 to 837. (Demonstration of intent to support; revocation 
effective August 9, 2009)
    ii. [alpha]-Alkyl(C12-C18)-[omega] 
hydroxypoly (oxyethylene) poly(oxypropylene) average molecular weight 
(in amu), 950 to 1120. (Demonstration of intent to support; revocation 
effective August 9, 2009)
    Under paragraph (b):
    i. [alpha]-Lauroyl-[omega]-hydroxypoly (oxyethylene) with an 
average of 8-9 moles ethylene oxide, average molecular weight (in amu), 
400. (No demonstration of intent to support; revocation effective 
August 9, 2008)
    ii. Oxirane, methyl-, polymer with oxirane, ether with (1,2-
ethanediyldinitrilo)tetrakis [propanol] (4:1). (No demonstration of 
intent to support; revocation effective August 9, 2008)
    Under paragraph (c):
    i. [alpha]-Alkyl(C10-C14)-[omega]-hydroxypoly 
(oxyethylene) poly (oxypropylene) average molecular weight (in amu), 
768 to 837. (Demonstration of intent to support; revocation effective 
August 9, 2009)
    ii. [alpha]-Alkyl(C11-C15)-[omega]-
hydroxypoly (oxyethylene) with ethylene oxide content 9 to 13 moles. 
(Demonstration of intent to support; revocation effective August 9, 
2009)
    iii. [alpha]-Alkyl(C12-C15)-[omega]-
hydroxypoly (oxyethylene) polyoxypropylene, average molecular weight 
(in amu), 965. (No demonstration of intent to support; revocation 
effective August 9, 2008)
    iv. [alpha]-Alkyl(C12-C18)-[omega]-
hydroxypoly (oxyethylene) poly(oxypropylene) average molecular weight 
(in amu), 950 to 1120. (Demonstration of intent to support; revocation 
effective August 9, 2009)
    v. [alpha]-Lauroyl-[omega]-hydroxypoly (oxyethylene) with an 
average of 8-9 moles ethylene oxide, average molecular weight (in amu), 
400. (No demonstration of intent to support; revocation effective 
August 9, 2008)
    vi. Naphthalene sulfonic acid, sodium salt. (No demonstration of 
intent to support; revocation effective August 9, 2008)
    vii. Naphthalene sulfonic acid sodium salt, and its methyl, 
dimethyl and trimethyl derivatives. (Demonstration of intent to 
support; revocation effective August 9, 2009)
    viii. Naphthalene sulfonic acid sodium salt, and its methyl, 
dimethyl and trimethyl derivatives alkylated at 3% by weight with 
C6-C9 linear olefins. (Demonstration of intent to 
support; revocation effective August 9, 2009)
    ix. Oxirane, methyl-, polymer with oxirane, ether with (1,2-
ethanediyldinitrilo)tetrakis [propanol] (4:1). (No demonstration of 
intent to support; revocation effective August 9, 2008)

List of Subjects

    Environmental protection.

    Dated: July 22, 2008.
Lois Rossi,
Director, Registration Division, Office of Pesticide Programs.
[FR Doc. E8-17457 Filed 8-1-08; 8:45 am]

BILLING CODE 6560-50-S
