
[Federal Register Volume 80, Number 125 (Tuesday, June 30, 2015)]
[Notices]
[Page 37247]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-16036]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OECA-2014-0098; FRL-9929-18-OEI]


Information Collection Request Submitted to OMB for Review and 
Approval; Comment Request; NESHAP for Nine Metal Fabrication and 
Finishing Sources (Renewal)

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: The Environmental Protection Agency has submitted an 
information collection request (ICR), ``NESHAP for Nine Metal 
Fabrication and Finishing Sources (40 CFR part 63, subpart XXXXXX) 
(Renewal)'' (EPA ICR No. 2298.04, OMB Control No. 2060-0622), to the 
Office of Management and Budget (OMB) for review and approval in 
accordance with the Paperwork Reduction Act (44 U.S.C. 3501 et seq.). 
This is a proposed extension of the ICR, which is currently approved 
through June 30, 2015. Public comments were previously requested via 
the Federal Register (79 FR 30117) on May 27, 2014 during a 60-day 
comment period. This notice allows for an additional 30 days for public 
comments. A fuller description of the ICR is given below, including its 
estimated burden and cost to the public. An Agency may neither conduct 
nor sponsor, and a person is not required to respond to, a collection 
of information unless it displays a currently valid OMB control number.

DATES: Additional comments may be submitted on or before July 30, 2015.

ADDRESSES: Submit your comments, referencing Docket ID Number EPA-HQ-
OECA-2014-0098, to: (1) EPA online using www.regulations.gov (our 
preferred method), by email to docket.oeca@epa.gov, or by mail to: EPA 
Docket Center, Environmental Protection Agency, Mail Code 28221T, 1200 
Pennsylvania Ave. NW., Washington, DC 20460; and (2) OMB via email to 
oira_submission@omb.eop.gov. Address comments to OMB Desk Officer for 
EPA.
    EPA's policy is that all comments received will be included in the 
public docket without change including any personal information 
provided, unless the comment includes profanity, threats, information 
claimed to be Confidential Business Information (CBI), or other 
information whose disclosure is restricted by statute.

FOR FURTHER INFORMATION CONTACT: Patrick Yellin, Monitoring, 
Assistance, and Media Programs Division, Office of Compliance, Mail 
Code 2227A, Environmental Protection Agency, 1200 Pennsylvania Ave. 
NW., Washington, DC 20460; telephone number: (202) 564-2970; fax 
number: (202) 564-0050; email address: yellin.patrick@epa.gov.

SUPPLEMENTARY INFORMATION: Supporting documents which explain in detail 
the information that the EPA will be collecting are available in the 
public docket for this ICR. The docket can be viewed online at 
www.regulations.gov or in person at the EPA Docket Center, WJC West, 
Room 3334, 1301 Constitution Ave. NW., Washington, DC. The telephone 
number for the Docket Center is 202-566-1744. For additional 
information about EPA's public docket, visit: http://www.epa.gov/dockets.
    Abstract: The regulation applies to nine metal fabrication and 
finishing area source categories: (1) Electrical and Electronic 
Equipment Finishing Operations; (2) Fabricated Metal Products; (3) 
Fabricated Plate Work (Boiler Shops); (4) Fabricated Structural Metal 
Manufacturing; (5) Heating Equipment, except Electric; (6) Industrial 
Machinery and Equipment Finishing Operations; (7) Iron and Steel 
Forging; (8) Primary Metal Products Manufacturing; and (9) Valves and 
Pipe Fittings. The final rule establishes emission standards in the 
form of management practices and equipment standards for new and 
existing operations of dry abrasive blasting, machining, dry grinding 
and dry polishing with machines, spray painting and other spray 
coating, and welding operations. These standards reflect EPA's 
determination regarding the generally achievable control technology 
and/or management practices for the nine area source categories.
    Form Numbers: None.
    Respondents/affected entities: Owners and operators of facilities 
in the nine metal fabrication and finishing source categories.
    Respondent's obligation to respond: Mandatory (40 CFR part 63, 
subpart XXXXXX).
    Estimated number of respondents: 5,800 (total).
    Frequency of response: Initially, occasionally and annually.
    Total estimated burden: 35,700 hours (per year). Burden is defined 
at 5 CFR 1320.3(b).
    Total estimated cost: $3,600,000 (per year), which includes $0 for 
both annualized capital and operation & maintenance costs.
    Changes in the Estimates: There is an adjustment increase in the 
estimated burden as currently identified in the OMB Inventory of 
Approved Burdens. The previous ICR incorrectly carried over burdens and 
costs from initial activities and divided the total number of 
respondents by three. This ICR is corrected to reflect the annual, on-
going burden and costs for existing facilities. In addition, the use of 
more updated labor rates results in an increase in total labor costs. 
The overall result is an increase in burden hours and costs.

Courtney Kerwin,
Acting Director, Collection Strategies Division.
[FR Doc. 2015-16036 Filed 6-29-15; 8:45 am]
 BILLING CODE 6560-50-P


