
[Federal Register Volume 80, Number 59 (Friday, March 27, 2015)]
[Notices]
[Page 16379]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2015-07028]



[[Page 16379]]

-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OECA-2014-0097; FRL-9923-32-OEI]


Information Collection Request Submitted to OMB for Review and 
Approval; Comment Request; NESHAP for Plating and Polishing Area 
Sources (Renewal)

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: The Environmental Protection Agency (EPA) has submitted an 
information collection request (ICR), ``NESHAP for Plating and 
Polishing Area Sources (40 CFR part 63, subpart WWWWWW) (Renewal)'' 
(EPA ICR No. 2294.04, OMB Control No. 2060-0623), to the Office of 
Management and Budget (OMB) for review and approval in accordance with 
the Paperwork Reduction Act (44 U.S.C. 3501 et seq). This is a proposed 
extension of the ICR, which is currently approved through April 30, 
2015. Public comments were previously requested via the Federal 
Register (79 FR 30117) on May 27, 2014 during a 60-day comment period. 
This notice allows for an additional 30 days for public comments. A 
fuller description of the ICR is given below, including its estimated 
burden and cost to the public. An Agency may not conduct or sponsor and 
a person is not required to respond to a collection of information 
unless it displays a currently valid OMB control number.

DATES: Additional comments may be submitted on or before April 27, 
2015.

ADDRESSES: Submit your comments, referencing Docket ID Number EPA-HQ-
OECA-2014-0097, to (1) EPA online using www.regulations.gov (our 
preferred method), or by email to docket.oeca@epa.gov, or by mail to: 
EPA Docket Center, Environmental Protection Agency, Mail Code 28221T, 
1200 Pennsylvania Ave. NW., Washington, DC 20460; and (2) OMB via email 
to oira_submission@omb.eop.gov. Address comments to OMB Desk Officer 
for EPA.
    EPA's policy is that all comments received will be included in the 
public docket without change including any personal information 
provided, unless the comment includes profanity, threats, information 
claimed to be Confidential Business Information (CBI) or other 
information whose disclosure is restricted by statute.

FOR FURTHER INFORMATION CONTACT: Patrick Yellin, Monitoring, 
Assistance, and Media Programs Division, Office of Compliance, Mail 
Code 2227A, Environmental Protection Agency, 1200 Pennsylvania Ave. 
NW., Washington, DC 20460; telephone number: (202) 564-2970; fax 
number: (202) 564-0050; email address: yellin.patrick@epa.gov.

SUPPLEMENTARY INFORMATION: Supporting documents, which explain in 
detail the information that the EPA will be collecting, are available 
in the public docket for this ICR. The docket can be viewed online at 
www.regulations.gov or in person at the EPA Docket Center, EPA WJC 
West, Room 3334, 1301 Constitution Ave. NW., Washington, DC. The 
telephone number for the Docket Center is 202-566-1744. For additional 
information about EPA's public docket, visit: http://www.epa.gov/dockets.
    Abstract: The National Emission Standards for Hazardous Air 
Pollutants (NESHAP) for Plating and Polishing Area Sources regulations 
apply to respondents that are plating and polishing facilities engaged 
in any of the following processes: Non-chromium electroplating; 
electroless or non-electrolytic plating; other non-electrolytic metal 
coating processes such as chromate conversion coating, nickel acetate 
sealing, sodium dichromate sealing, manganese phosphate coating, 
thermal spraying; dry mechanical polishing of finished metals and 
formed products after plating or thermal spraying, electroforming, and 
electro-polishing. New facilities include those that commenced 
construction or reconstruction after the date of proposal. The required 
annual reports are used to determine periods of excess emissions, 
identify problems at the facility, verify operation/maintenance 
procedures and for compliance determinations. This information is also 
collected to assure compliance with 40 CFR part 63, subpart WWWWWW.
    Form Numbers: None.
    Respondents/affected entities: Owners and operators of plating and 
polishing facilities.
    Respondent's obligation to respond: Mandatory (40 CFR part 63, 
subpart WWWWWW).
    Estimated number of respondents: 2,900 (total).
    Frequency of response: Initially and annually.
    Total estimated burden: 64,315 hours (per year). Burden is defined 
at 5 CFR 1320.3(b).
    Total estimated cost: $6,304,966 (per year), which includes $8,314 
in annualized capital/start-up costs and 0 in operation & maintenance 
costs.
    Changes in the Estimates: There is an increase of 31,208 hours in 
the total estimated respondent burden compared with the ICR currently 
approved by OMB. The change in burden and cost estimates occurred as a 
result of updating the burden tables to accurately reflect the 
reporting and recordkeeping requirements of the rule.

Courtney Kerwin,
Acting Director, Collection Strategies Division.
[FR Doc. 2015-07028 Filed 3-26-15; 8:45 am]
BILLING CODE 6560-50-P


