
[Federal Register Volume 84, Number 52 (Monday, March 18, 2019)]
[Notices]
[Pages 9795-9796]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-05009]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OECA-2014-0086; FRL-9990-10-OEI]


Information Collection Request Submitted to OMB for Review and 
Approval; Comment Request; NESHAP for Flexible Polyurethane Foam 
Fabrication (Renewal)

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: The Environmental Protection Agency (EPA) has submitted an 
information collection request (ICR), NESHAP for Flexible Polyurethane 
Foam Fabrication (EPA ICR No. 2027.07, OMB Control No. 2060-0516), to 
the Office of Management and Budget (OMB) for review and approval in 
accordance with the Paperwork Reduction Act. This is a proposed 
extension of the ICR, which is currently approved through March 31, 
2019. Public comments were previously requested, via the Federal 
Register, on May 30, 2018 during a 60-day comment period. This notice 
allows for an additional 30 days for public comments. A fuller 
description of the ICR is given below, including its estimated burden 
and cost to the public. An agency may neither conduct nor sponsor, and 
a person is not required to respond to, a collection of information 
unless it displays a currently valid OMB control number.

DATES: Additional comments may be submitted on or before April 17, 
2019.

ADDRESSES: Submit your comments, referencing Docket ID Number EPA-HQ-
OECA-2014-0086, to: (1) EPA online using www.regulations.gov (our 
preferred method), or by email to docket.oeca@epa.gov, or by mail to: 
EPA Docket Center, Environmental Protection Agency, Mail Code 28221T, 
1200 Pennsylvania Ave. NW, Washington, DC 20460; and (2) OMB via email 
to oira_submission@omb.eop.gov. Address comments to OMB Desk Officer 
for EPA.
    EPA's policy is that all comments received will be included in the 
public docket without change including any personal information 
provided, unless the comment includes profanity, threats, information 
claimed to be Confidential Business Information (CBI), or other 
information whose disclosure is restricted by statute.

FOR FURTHER INFORMATION CONTACT: Patrick Yellin, Monitoring, 
Assistance, and Media Programs Division, Office of Compliance, Mail 
Code 2227A, Environmental Protection Agency, 1200 Pennsylvania Ave. NW, 
Washington, DC 20460; telephone number: (202) 564-2970; fax number: 
(202) 564-0050; email address: yellin.patrick@epa.gov.

SUPPLEMENTARY INFORMATION: Supporting documents, which explain in 
detail the information that the EPA will be collecting, are available 
in the public docket for this ICR. The docket can be viewed online at 
www.regulations.gov, or in person at the EPA Docket Center, WJC West, 
Room 3334, 1301 Constitution Ave. NW, Washington, DC. The telephone 
number for the Docket Center is 202-566-1744. For additional 
information about EPA's public docket, visit: http://www.epa.gov/dockets.
    Abstract: The National Emission Standards for Hazardous Air 
Pollutants (NESHAP) for Integrated Iron and Steel Manufacturing 
Facilities (40 CFR part 63, subpart FFFFF) apply to new and existing 
sinter plants, blast furnaces, and basic oxygen process furnace shops 
at integrated iron and steel manufacturing facilities that are major 
sources of hazardous air pollutants (HAPs) or are co-located at major 
sources. New facilities include those that commenced either 
construction or reconstruction after the date of proposal. In general, 
all NESHAP standards require initial notifications, performance tests, 
and periodic reports by the owners/operators of the affected 
facilities. They are also required to maintain records of the 
occurrence and duration of any startup, shutdown, or malfunction in the 
operation of an affected facility, or any period during which the 
monitoring system is inoperative. These notifications, reports, and 
records are essential in determining compliance, and are required of 
all affected facilities subject to NESHAP. This information is being 
collected to assure compliance with 40 CFR part 63, subpart FFFFF.
    Form Numbers: None.
    Respondents/affected entities: Flexible polyurethane foam 
fabrication facilities.
    Respondent's obligation to respond: Mandatory (40 CFR part 63, 
subpart MMMMM).
    Estimated number of respondents: 20 (total).
    Frequency of response: Initially, occasionally, semiannually, and 
annually.
    Total estimated burden: 22,200 hours (per year). Burden is defined 
at 5 CFR 1320.3(b).
    Total estimated cost: $2,560,000 (per year), which includes $34,500 
in annualized capital/startup and/or operation & maintenance costs.

[[Page 9796]]

    Changes in the Estimates: There is an increase in the total 
estimated respondent burden compared with the ICR currently approved by 
OMB. The increase in burden is not due to any program changes, but is 
due to an adjustment. The adjustment increase in burden from the most-
recently approved ICR is due to an increase in the number of new or 
modified sources due to continued industry growth. In addition, the 
burden estimate for reading and understanding the rule requirements was 
adjusted to reflect the time it would take existing respondents to 
review the rule each year. The overall result is an increase in burden 
and costs.

Courtney Kerwin,
Director, Regulatory Support Division.
[FR Doc. 2019-05009 Filed 3-15-19; 8:45 am]
 BILLING CODE 6560-50-P


